Job Search Results

532 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:35PM Pacific Time by ContractJobHunter. )

Listings 1 - 532

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Hydraulics / Pneudraulics Maintenance / wheels and tires SC

Description:
1886-1 Hydraulics/Pneudraulics
Work Location: Greenville, SC
Status: Open

This position requires AIRCRAFT Hydraulics maintenance experience.

Qty: 1
Desired Start Date: 8/16/2019
End Date: 1/4/2020

Job Description:
The hiring manager is looking for people that have knowledge and understanding of the basic operations of aircraft hydraulics. This position will not necessarily be doing hydraulic operations 24/7 but will instead spend most of the time (not all) manufacturing hydraulic and oxygen lines, tear down and build up of wheels and tires, hydraulic fuel sampling, and working on hydraulic support equipment used on aircraft.

Aircraft Hydraulics maintenance. Performs test and checkout of mechanical, electrical, propulsion, structural, hydraulic subsystems and complete systems located at field locations away from primary company operations. Verifies and corrects such things as welds, sheet metal assemblies, controls, alignment of equipment.

Fabricates Fluid lines and Cables
Build up of wheels and tires
Performs Test Bench Checkouts and Testing
Hydraulic Fluid Sampling

Contractor must be willing to learn and be trained.
Hydraulic experience is required


Pay Rate: $25.00 - $29.00 Hourly

Skills Required
Areas of Expertise Hydraulics Yes 1 2 - 4 Years
Areas of Expertise Wheels No 2 < 1 Year
 
Job Number: JE-1886-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - Clearance CA

Description:
164441 1657-1 Avionic Technician
Work Location: Edwards AFB, CA
Status: Open

Qty: 2
Desired Start Date: 7/8/2019
End Date: 6/5/2020
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Description:
Candidate must have a minimum of 8 years’ experience in fighter aircraft electrical maintenance
Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
Work in a safe and efficient manner while maintaining a clean, FOD-free work area.


Pay Rate: $31.85 Hourly

Experience
Areas of Expertise F-22 No 1
 
Job Number: JEG -1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Clearance Job Opportunities

Description:
In addition to hundreds of commercial and business aircraft contract employment opportunities, a growing number of our clients' openings are requiring active Secret or Top Secret clearance.

If you are currently available, seeking employment and want to utilize/maintain your clearance, please connect ASAP!

Systems Engineering
Structural Engineering
Electrical Engineering
Manufacturing Engineering
Software Engineering
Software Test
AND More...
 
Rate: $50-100/+ per hour
Per Diem: Split often available
Overtime: Possible
Duration: 6mo - 3 yrs
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Level Test Engineer (Advanced Electrical Instrumentation and Data Acquisition Systems)

Description:
The ideal candidate will have solid electronic component troubleshooting and test skills, including digital motor controllers, brushless DC motors, FPGAs and VHDL experience. They should also have component circuit board level testing and troubleshooting, test procedure writing and requirements distillation experience.

The candidate will:
•design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques.
•take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
•this can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include:
•the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
•daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
•Support laboratory testing of Space hardware,
•Develop and validate tooling concepts,
•Author and maintain operation/test procedures,
•Prepare standardized operation/test sheets,
•Define test rig and facility requirements,
•Participate on program Integrated Product Development teams,
•Review drawings and concepts, and
•Resolve productivity concerns.

Required:
•Experience with Advanced Electrical Instrumentation and Data Acquisition Systems
•Five (5+) years working on the testing of complex electrical systems,
•Testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers,
•Testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
•Applicant must have the capability of working independently and be self-motivated.
•Excellent communication skills, written and verbal.
•Ability to proficiently operate common Microsoft Office software products

Desired •Knowledge of LabVIEW desired.
 
Job Number: 1910100496
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Construction Safety Engineer

Description:


























Construction Safety Engineer




ROLE SUMMARY



Position involves over-site for all trades within Construction Safety including maintenance, facilities and Site Services contractors at the Site. Leads EHS support for Capital projects.

ROLE RESPONSIBILITIES


  • Serve as program owner for the Site's Contractor Safety program that includes knowledge of construction crane safety, confined space, hot work, fall protection, line breaking and lockout, excavations, silica, electrical safety, waste management and scaffolding.

  • Serve as a member of the Site's Environment Health and Safety team.

  • Over-site of processes/systems that ensure contractors and colleagues are compliant with federal, state, local Construction Safety Regulations, Pharmaceutical's Construction Safety Guidelines and Global and Site EHS requirements.

  • Conducts field inspections on Construction projects to identify hazards and opportunities for improvement.

  • Responsible for ensuring that positive working relationships with key stakeholders are maintained.

  • Assist in establishing Contractor Safety short and long-term strategies, ensuring program effectiveness through continuous improvement of processes such as but not limited to, contractor prequalification, site compliance inspections, program evaluations, and process simplifications.

  • Primary oversight of effective safety activities such as coaching the contractor and project staff on safe work practices, pre-job safety planning (i.e. co-leading meetings, job safety analysis and working at heights planning), safety observations, site inspections/audits, and corrective action plans.

  • Pre-plan review and oversight of high-risk activities such as lift plans, elevated work, electrical energizing/testing etc.

  • Participate in Project Reviews for contracted maintenance work and coordinate Site Safety Plans with contractors. Review construction methods as part of project team and with Maintenance Contract Managers, from early project planning through completion of project.

  • Lead and set expectations on proper safety planning, enhancing the use of Pre-Job Hazard Assessments on construction and eventually non-construction areas.

  • Develop and ensure processes are in place to assure that contractors and project team members or maintenance contractor managers to the construction site understand the environmental and safety expectations. (Actual training is performed by Contractor Safety personnel).

  • Performs Contractor Safety Gap assessments to continually improve the Site's program.

  • Provides technical consulting for construction site safety related issues along with serving as a liaison across Operations, EHS, Maintenance, and Capital Project teams. Provides EHS leadership in risk-based decision making while keeping key organizational Leaders informed in Construction Safety.

  • Support the site with review of contractor incidents and, remediation or improvement plans, and other actions to ensure contractor safety for all trade contractors on-site. Review contract firm safety programs for compliance with Pharmaceutical programs and best practices.

  • Identify trends and best practices in the contractor safety area and implement new site programs for trade contractors as appropriate. This includes defining metrics to evaluate contractor's performance.

  • Successfully uses recognized system analysis tools to perform risk assessments, investigations, program auditing that result in identifying value-added improvements. Identify trends that have the potential to create harm to people, work, environments or communities.

  • Conducts and documents project level incident investigations; documenting root causes contributing to an incident and corrective actions.

  • Understands and interprets electrical safety standards; the National Electric Code (NEC), the National Fire Protection Association (NFPA) 70E, NESC (National Electrical Safety Code).




BASIC QUALIFICATIONS

  • Bachelor Degree in Engineering with at least 3-years of experience in Construction Safety


or

Associate Degree in Engineering with at least 5-years of experience in the Construction Safety field.


  • Has strong knowledge of the 26 CFR OSHA (MIOSHA) Construction safety and 29 CFR General Industry OSHA (MIOSHA) regulations, along with programs such as Fall Protection, Crane Safety, Excavation, Confined Space, Hot Work, Safe Work Permitting, Lockout and Line Entry.

  • Experience in assessing risks, developing and implementing proactive strategies to minimize related incidents and process deviations. Documenting such information for the purposes of informing others of risk factors and resolutions.

  • Experience in developing and implementing Safety and Environmental programs to facilitate compliance that meet and exceed MIOSHA General & Construction Industry Safety Regulations.

  • Successfully manages projects, is process minded and demonstrates the ability to build and execute action plans both individually and through project teams to ensure alignment in pursuit of organizational deliverables. Motivation and ability to execute projects/tasks in a timely manner, Strong prioritization and time management skills

  • The ability to solve complex technical problems and provide expert technical support, managing EHS projects.

  • Demonstrated ability to successfully influence and engage with multiple levels of the organization and the proven ability to lead cross functional teams.

  • Excellent interpersonal and conflict resolution skills

  • Well-developed verbal and written communication skills

  • Able to function in a collaborative team environment, while also able to operate independently.

  • Demonstrates the ability to read design drawings (P&ID's, Electrical drawings, etc.).


PREFERRED QUALIFICATIONS


  • Project Management Professional (PMP) Certification.

  • Professional Engineer.

  • Six Sigma, LEAN Experience.

  • Has Project and/or facilities and equipment start-up and shutdown experience is a plus!

  • Working knowledge of program requirements such as Electrical Safety – the National Electric Code (NEC), the National Fire Protection Association (NFPA) 70E, NESC (National Electrical Safety Code) and NFPA 70E.






PHYSICAL/MENTAL REQUIREMENTS



Candidate must have the ability to effectively maintain emotional intelligence through conflict resolutions

Candidates should be capable of walking and climbing in a variety of work environments both inside and outside of buildings on a variety of work surfaces. Part of this job involves sitting and standing in a variety of office and conference settings.


NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

Candidates are expected to be on call for EHS investigation purposes and at times may need to extend work schedule to manage workload. The position at times will require working varying shifts in order to support the needs of the EHS organization.


OTHER INFORMATION

  • Relocation Eligible





  • This position is supported by other contractor safety resources currently supporting the Site's Contractor Safety program.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-24813
Job Location: Kalamazoo, MI
Rate: 92900.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Candidate will evaluate, select, and apply standard engineering methods, techniques, procedures and criteria, using independent judgment in making adaptations and modifications. Perform assignments, which have clear and specific objectives and require the investigation of a limited number of variables for Control System Engineering; supports the use of common work processes and procedures within assigned function across the TOS contract. Perform work, generally within Control System Engineering, which involves the preparation, interpretation or review of calculations, specifications, plans, investigations, surveys, structures, systems or equipment with relatively few complex features. Participate in one or more of the following: Development of system requirements. Automated Control System design, development, and/or maintenance. System design, including concept sketches and layouts. Automated Control and Human Machine Interface (HMI) Software Development. Preparation of specifications and design calculations

Preparing designs, drawings and data under the supervision of a more experienced engineer. Preparation of engineering studies and reports. Preparation of material quantity estimates. Uses engineering computer aided design/computer aided engineering (CAD/CAE) tools. System troubleshooting and return-to-service. System Verification and Validation Test Development/Execution. Draft letters for replies to vendor correspondence. Monitor schedule for own work. Review design documents of equipment manufacturers or subcontractors of a low to moderate degree of complexity, and prepare comments and recommendations. It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy. Perform other related duties as required.

Required: Candidate must have a Bachelor’s degree in Electrical Engineering or a related scientific discipline from a regionally accredited college or university (ABET accreditation preferred) or a sufficient number of specialized courses in relevant general engineering or appropriate engineering disciplines to meet job requirements. Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Basic skill in oral and written communication.

Desired: Candidate is desired to have an Active Secret Security Clearance, but not required to start. Basic technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems. Developmental experience such as practical work experience in design engineering or other relevant types of engineering such as systems startup, field engineering, or plant operation in large industrial plants, utilities, process plants or other engineering/construction firms. Developmental experience in the control system theory and design concepts such as Controls Strategy and Algorithm Development, Math Modeling/Simulations, Calibration, Motion Controls, Process Controls, Process Instrumentation, Sequencing Systems, Robotics, Stability & Control, Servomechanisms, Systems Safety, Networks & Field Busses, Control System Optimization, Learning and Rule-based Systems. Coursework or experience in the design or application of closed loop control systems. Coursework of experience in feedback control systems. Coursework or experience in the design of application of control systems using Programmable Logic Controllers (PLC). Coursework or experience with proportional, integral, derivative (PID) control systems. Coursework or experience developing control application and Human Machine Interface (HMI) software. Experience with GE PLC’s, automation hardware, and related software is highly desired.

This is an entry-level position

Must be a U. S. Citizen
 
Job Number: 19-012
Job Location: Tullahoma, AL
Rate: 25.00 -35.00 hrly
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
A Controls Engineer with at least 3 years' experience is required for building/programming of automation systems. The ideal candidate has experience in a Manufacturing environment with specific experience in the following areas:

  • Programming of motion controls, ladder logic, Visual Basic and HMI's.

  • Engineer control systems used in high performance machines.

  • Supervise initial installation and optimization of machinery ensuring maximum production potential.

  • Administer maintenance and modifications of existing PLC programs.

  • Efficiently manage multiple projects and processes across a large scope of work, simultaneously gauging task priority.

  • SQL database storage of captured inspection or manufacturing data






This individual will work with other members of the Engineering department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon. Will work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system. Will provide thorough testing of machine functionality to verify software program completeness and provide accurate documentation for each project. Will also advise customer on solving technical problems and provide customer with training specific to their current project (i.e. machine operation, programming principles and program structure).

REQUIREMENTS:

  • Understanding of robotics, control systems and machine operation with hands-on experience.

  • Design electrical controls for electro-mechanical systems.

  • Must be able to spec components

  • Select, test and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems and lasers.

  • Broad range of PLC experience/Ladder Logic programming skills

  • Electrical schematics (read and develop)




  • A self-starter with the ability to work alone or as part of a team in a fast paced environment with minimal supervision.

  • VisualBasic or .Net developer skills






The following skills will be considered a plus:

  • Some travel to customer sites as required for buy-offs, maintenance/repair

  • Autocad and SolidWorks software experience

  • Physically wire systems as designed

  • More than 5 years' experience

  • Familiar with NFPA, UL 508, NEC codes

  • An understanding of Pneumatic controls

  • Familiar with Allen Bradley PLC


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35160
Job Location: Mesa, AZ
Rate: 90000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-09-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DRAFTING SUPPORT

Description:
Role: Drafting Support
Location: Vandenberg AFB, CA
Duration: 6+ months’ contract

Qualifications:
• Work duties will include creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
• Performing walk downs of projects to verify details will be required. Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital.
• Perform configuration management and drawing release functions.
Basic Qualifications:
• A minimum of 5 years of professional drafting experience.
• Experience with drafting electrical, mechanical and structural designs.
• Experience working independently and in a team environment.
• Proficient knowledge in Microsoft Office Suite.
• The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
• Have mastery of AutoCAD drawing program.
• Ability to read and interpret mechanical and electrical drawings and logic diagrams
 
Job Number: 19-04583
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Utilizes advanced modeling and analysis tools to develop product specifications, models, simulations, technical data packages and integration/verification procedures.
Expert knowledge of CAD drafting/modeling and design techniques.
Experience designing wiring harnesses/cable assemblies, routing of wiring harnesses/cable assemblies and developing wiring harness/cable assembly drawings
Understanding of drawing generation utilizing Unigraphics NX (minimum 2-3 years experience)
Understanding of MIL-STD-100, ANSI Y14.5/14.41, and Geometric Dimensioning and Tolerancing (GD and T).
Understanding of wire routing utilizing Routed Systems (minimum 2-3 years experience)
Working knowledge of military electrical connector and electrical cabling specifications. Capable of creating wiring harness schematics with Visio Technical
 
Job Number: 47372
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design & Analysis Engineer 3
Oklahoma City, OK
6 months
Job Description: Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
Bachelors degree required in engineering, computer science or related field
 
Job Number: 19-12048
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/13/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMC Engineer w/Top Secret Clearance

Description:
*This is a full time, 15 month position, based in Fort Worth*



We are hiring for an aircraft Electro Magnetic Compatibility Systems Engineer who will be creating EMC/EME requirements definition/compliance testing. Candidate will travel to many company sites to define the EMC requirements of the site, analyze and test equipment, systems, and aircraft to assure proper operation within the electromagnetic spectrum. Candidate will create design authority for electrical bonding, wire harness and other shielding, wire routing, and electrical ground system design



Required:
*8 years’ experience as a system or similar engineer in aircraft component EMC compatibility testing.
*Knowledge of MIL-STD 464 and 461
*Experience using tools such as PSpice (ORCAD), MATLAB and EXCEL.
*Active Top Secret Clearance; US Citizens only.
*Able to travel to company sites, 1-2 weeks at a time.
 
Job Number: 106
Job Location: Fort Worth, TX
Rate: market
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:

Electrical/Controls Engineer



Our Client is searching for an Electrical/Controls Engineer who wish to advance their career in the aerospace and/or power generation field. Reporting to the Engineering Supervisor, the primary focus of this addition to the Engineering Department is to analyze, control, modify, and execute programs in CNC Machine Controllers. The Electrical/Controls Engineer will also assist and/or define electronic control requirements of CNC equipment as well as plan and provide for control of programming to prevent accidental loss (i.e. power outage) and provide protection of data. Additionally, the person in this role will perform and assist in interfacing all machine/equipment upgrades or additions. Our client offers competitive wages and a full benefit package which includes medical (both a PPO plan and a high deductible plan), dental, vision, life insurance (both company provided and optional purchase by the employee), short and long-term disability, 9 paid holidays per year, paid vacation time and the chance to contribute to the 401K plan which has a $0.50 match for every dollar you contribute up to the first 6%. On top of all that, our client offers a clean and climate controlled environment to work in.



Essential Duties and Tasks:

Analyze , control, modify and execute programs in CNC Machine Controllers.

Fanuc CNC integration, repair and maintenance.

PLC, ladder logic, servo systems, variable frequency drive, digital and analog systems.

Utilize 2D and 3D computer graphics with some proficiency.

Perform diagnostic and follow-up maintenance on electronic equipment including, but not limited to PLC, robotic, and CNC controllers.

Define electronic control requirements of CNC equipment.

Provide advice to internal personnel on any equipment and tooling designs requiring electrical/electronic interface.

Coordinate electronic CNC controller programming with information systems.

Assist and support install of all new equipment.

Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment.



Qualifications, Education and Experience:



BS or AS in Electrical Engineering or 3+ years of experience building electrical devices and controls for machines used in manufacturing.

Ability to read machine electrical schematics of machines and electronics.

2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.

Knowledge of Ethernet wiring, basic network configuration and networking concepts.

Experience programming manufacturing machines (CNC, ladder, object-oriented programming).

Experience troubleshooting electrical, mechanical and/or computers.

Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.

Fanuc CNC experience a plus.

Ability to perform multiple tasks simultaneously.

Strong electronic and machine language programming skills.

Demonstrated ability to influence others positively in order to achieve positive work results.

Ability to communicate effectively at all levels with external and internal customers.

Ability to effectively work with skilled trades on various aspects of building CNC machinery.

Strong problem-solving skills with creativity and tenacity.

Occasional travel.



Always take ownership and be accountable for your actions. This job description is a tool to be followed. Other job duties my be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. Good and reliable attendance, positive attitude, and always take ownership of your job and team.



EEO Statement:



Our client provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability status, or any other classification protected by state, federal, or local laws. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of the characteristics. Discrimination of any type will not be tolerated.



Experience:




  • Electrical Engineering: 1 year (Preferred)

  • CNC machining: 1 year (Preferred)



Education:




  • Bachelor's (Preferred)



Benefits:




  • Health insurance

  • Dental insurance

  • Vision insurance

  • Retirement plan

  • Paid time off



This Company Describes Its Culture as:




  • Stable -- traditional, stable, strong processes

  • People-oriented -- supportive and fairness-focused

  • Team-oriented -- cooperative and collaborative



Schedule:




  • Monday to Friday

  • Day shift

  • 8 hour shift


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34669
Job Location: Mason, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-02 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Mary Beth Principe
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
Electrical Designer

Chula Vista, CA
$48.25/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Master electrical harness and electrical wiring interconnect system (EWIS) designer.

Responsible for design and routing of electrical harnesses across equipment product quite. Requires design skill mastery of CATIA V5 and Electrical Workbench including EHI and EHF.

Ability to design, release, manage, status and prioritize electrical harness design and supporting documents with minimal guidance or supervision.

Ability to design and demonstrate compliance to EWIS standards. This includes generating requirement compliance matrices.

Additional responsibility to support design changes to existing electrical harnesses. Harnesses will be used throughout aircraft engine nacelles, including, but not limited to, thrust reverser actuation equipment, fan cowls, engine build up and nacelle inlets.

Expert experience with EWIS, pin/connector wire design, lightning/bonding & grounding. Experience with wiring/harness failure mode and effect analysis is strongly preferred.
 
Job Number: 11397
Job Location: Chula Vista, CA
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 6 Months

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross- functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127- 1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real- world work experience.
- 2- 6 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high-pressure gases.

Requires a bachelor’s degree and 2 - 6 years of experience (for external candidates only). Provides solutions to a variety of engineering/ scientific problems that require knowledge of company products and processes. Contributes to the completion of milestones associated with specific projects. Failure to achieve expected results may cause project delays and result in additional costs. Works under general supervision. Interprets procedures when performing an assignment. May modify adjustments to standard approaches. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy.
 
Job Number: 19-12035
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/30/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
We have a great opportunity for Electrical Engineer in Saginaw, Michigan

 

This is six-twelve month contract with Direct hire possible after six months.

Consultants assigned to the Company must be degreed [minimum of a Bachelor of Science in Electrical Engineering, Masters a plus] electrical engineers with expertise in actuator systems, including but not limited to, solenoids, linear or brushed motors.

Consultants assigned to the Company must sign the Undertaking referenced in Section 9 of the Non-Disclosure Agreement prior to starting employment.

 

Duties:

 

  • Support the Company’s Sr. Electrical Product Engineer’s current project with a potential Customer; 

  • Must have an in-depth understanding of how solenoids and linear motors are designed and the optimal processes for manufacturing these components;

  • Create a statement of requirements for the supplier; 




  • Define and oversee the design validation of electrical components; 




  • Help to define assembly level test requirements for function and quality 




  • Assist with the evaluation of each suppliers’ design and manufacturing proposal 

  • Will be in direct communications with Suppliers and be able to communicate technical information with a clear understanding. 

  • Launch experience is a plus. 

  • Mechanical electrical background a plus.


 

 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33545
Job Location: Saginaw, MI
Rate: 100000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-08-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Clearance CA

Description:
165775
Job Title: Electrical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1708-1
Max Pay Rate: $78.00/hr
Start Date: 7/6/2019
End Date: 1/10/2020
Position Type: Contract


Job Summary:
Looking for world-class talent in engineering to join the 75 year tradition of creating advanced aircraft. This position requires a Signals Intelligence (SIGINT) Engineer to use their technical, program, and systems expertise to design, develop, integrate, and qualify systems for advanced aircraft. The candidate will define specifications, system integration and troubleshooting, and perform aircraft checkout procedures. The candidate must be effective working in team environments, coordinating with multiple engineering disciplines internal and external. Strong verbal and writing skills are essential. The candidate must be able to interact with single or multiple Sensor Suppliers and direct tasking required for successful development and integration of a Sensor System.

Job Description:
i. Provide technical support to customer activities and programmatic processes
ii. Develop documents and briefings to communicate work or study status, brief Program Management as required
iii. Provide task-based schedule and resource forecasts
iv. Subcontract management experience
v. Develop Concept of Operations (CONOPS) for new capabilities and coordinate them across the affected organizations
vi. Assist in the development of system level, functional level and interface requirements
vii. Identify gaps between requirements and acquisition program capabilities being conducted by the customer
viii. Manage the Request for Change (RFC) process as it relates to closing requirement gaps
ix. Work with the enterprise architects to update related design documents to identify, clarify, and track task requirements and issues, remove barriers, resolve minor project issues and escalate to immediate manager where required

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS

Systems integration experience
Avionics Experience

Qty 1 position needed
 
Job Number: JE-1708-1TS5
Job Location: Palmdale, CA
Rate: 78/hr
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Clearance KY

Description:
165935
Job Title: Electrical Engineer

Work Site Address: Lexington, KY 40516
Job Number: 1927-1
Max Pay Rate: $68.00/hr
Start Date: 8/23/2019
End Date: 8/21/2020
Position Type: Contract

Job Summary:

Job Summary
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.

Education Requirements
Requires a BSEE from an accredited University.


Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS

Qty 2 positions needed
 
Job Number: JE-1927-1S
Job Location: Lexington, KY
Rate: 68/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Lexington, KY
$21.50/hr - $68/hr
1 year W2 contract
First Shift, 5/40
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Requires a BSEE from an accredited University.
 
Job Number: 11310
Job Location: Lexington, KY
Rate: 45.00-68.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 11/23/2020
Email: epetersen@pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Electrical M.E.:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
-Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
-Develop the specific methods and instructions for manufacture and/or assembly of products.
-Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
-Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Job Details:
Education / Certifications BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11376
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Engineer

Description:
• As a Senior Electrical Subsystem Engineer you'll report to the Lead Electrical Subsystem Engineer and be responsible for assisting with various aspects of the electrical systems design.

On any given day you might:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification
 
Job Number: 42-034
Job Location: Reno, NV
Rate: DOE, but very competitive
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer - Contract AND Direct Position Available

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

Qualifications

Education, Work Experience, Certification and/or Licensure:
BS in an Engineering related discipline required, Master’s degree preferred
5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
Knowledge of FAR Part 23 or 25 regulations
Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
Knowledge of system modeling and analysis tools preferred



The Structures Company is an AA/EOE.
 
Job Number: 320
Job Location: NC
Rate: $125K - $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Electrical Test Engineer

Windsor Locks, CT
$25/hr - $67/hr (DOE)
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve testability concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include two plus years working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Bachelors degree required
 
Job Number: 11307
Job Location: Windsor Locks, CT
Rate: 25-67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician - Louisville, Kentucky

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client in Louisville, KY! This is a temporary opportunity with the potential to become permanent!



The Electromechanical Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a client site.



Responsibilities:

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws.




Required Skills and Experience


  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided.

  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.


Shift will be Friday through Monday from 4:00am to 2:00pm.

 


 
Job Number: 19-34100
Job Location: Louisville, KY
Rate: 24.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-28 00:00:00.0
Start Date: 2019-08-26 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Burlington, NJ

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

This is a day shift position. All candidates must be available to work one weekend day.



Position Summary

 

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required. 

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


 

Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience. 

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Must be able to lift 50 pounds on regular basis unassisted

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • This is a day shift position. All candidates must be available to work one weekend day.


 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-33238
Job Location: Burlington, NJ
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nora Sapone
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Harrisonville, MO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a particular client site.

Position Summary



 


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

 

Core Duties and Responsibilities


 


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 



Candidates must be open to shift, overtime, weekends and holidays.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



  •  



 
Job Number: 19-32817
Job Location: Harrisonville, MO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Kannapolis, NC

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Technicians will be required to each work one day per weekend. Schedule will be as follows:

  • Jan to May and July to November 1: 5:00 AM to 3:30 PM  (4 10-hour days)

  • May to June and November 1 to December 31 5:00 AM to 5:30 PM (4 12-hour days)




Position Summary

 

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required. 

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


 

Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience. 

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Must be able to lift 50 pounds on regular basis unassisted

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • This is a day shift position. All candidates must be available to work one weekend day.


 

 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24534
Job Location: Concord, NC
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-27 00:00:00.0
Start Date: 2019-06-24 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Romeoville, IL

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



This is a 1st shift, Monday through Friday position.



Position Summary



The Electromechanical Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.







  •  
  •  


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-34973
Job Location: Romeoville, IL
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Stapleton, CO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Candidates must be open to working any shift, holidays, weekends and overtime. Specific schedule is to be determined; however, there is a possibility for 1st shift hours.

Position Summary


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

Core Duties and Responsibilities 




  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-27729
Job Location: Denver, CO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-24 00:00:00.0
Start Date: 2019-07-22 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Circuit Card Test and Design Engineer /DV&T

Description:
*This is a full time, 1 year position, located in Huntsville AL*



We are hiring for an Electronics Test and design Engineer who will work on electronics testing for DoD/Military anti-missile systems. The position will involve day to day working with detailed circuit board design/specification, schematic capture, FPGAs, DSP, electro optics, A/D and D/A conversions, and inertial measurement.



Candidates will need strong Circuit Card Assembly (CCA) design, verification, test and troubleshooting ability to create electrical circuit requirements from board level specifications creating CCAs that optimize Size, Weight, Power and Cost (SWAP-C)



Required:
*15 years’ experience as an Electronics circuit card test and design professional
*Strong circuit card assembly design for cradle to grave (specification to production)
*Design Verification and Test (DVT) skills
*Strong design review skill in either a technical appraiser or presenter.
*Experience with FPGAs and subcontracted electrical assemblies.
*Ability to apply and gain a secret Clearance upon start (requires US Citizernship)



Pluses:
*Earned Value Management System (EVMS) knowledge
*Experience with design and failure analysis of high-reliability electronic assemblies
 
Job Number: 832
Job Location: Huntsville, AL
Rate: $60.30
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 3 CA

Description:
Engineer Manufacturing 3 (Job Number: 19027440)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 28, 2019

Target End Date: Oct 23, 2020

Pay rate: $45.00 - $50.00
Number of openings: 1
Location: Rancho Bernardo, CA
Work schedule: 9/80



Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

- Experience in air vehicle production and modification: electrical, subsystems and installations
- System proficiency in CATIA, SAP, and some type of manufacturing execution system
- Ability to provide guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques
- Ability to translate engineering requirements into product build packages, including development and maintenance of bills of material, shop floor work instructions and visual work instructions
- Ability to identify tooling requirements & provide technical direction for design

Basic Qualifications: 5 Years with Bachelors in Science; 3 Years with Masters;
 
Job Number: JK-1803ATO
Job Location: Rancho Bernardo, CA
Rate: 45-50/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / Electrician for commercial facilities / journeyman electrical license required - Clearance NC

Description:
165718
Job Title: Facility Operations Analyst

Work Site Address: Fort Bragg, NC 28303
Job Number: 1810-1
Max Pay Rate: $24.50/hr
Start Date: 9/16/2019
End Date: 11/17/2019
Position Type: Contract

Job Summary:
Responsible for repairing and installing electrical systems in new industrial construction and maintaining electrical equipment and wiring. Must be able to identify, troubleshoot and repair problems in electrical wiring that occur in an industrial setting. Expected to be able to run tests, isolate problems, replace faulty sections of wiring, and lay conduit for the new electrical systems. Work well with public as well as with co-workers and willing to listen to others.

Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Qualifications and Education Requirements
Must have good math skills, as need to take measurements and work with numbers.
Must also be able to read blueprints. Should have good overall knowledge of all building electrical systems and electrical theory.

Requires lifting up to 55 pounds and moving it without assistance between building and across campus effectively and efficiently
Must have a journeyman electrical license.
Must be able to pass CRC Physical Assessment

Qty 1 position needed

In need of an Electrician for commercial facilities. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1810-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility and Design Engineer Level 2

Description:
Role: Facility and Design Engineer Level 2
Location: Vandenberg AFB, CA
Duration: 12+ months’ contract

Job Description:
• The Facility and Design Engineer will support repairs, modifications, and new designs of launch facilities in support of Launch Operations and Vandenberg Air Force Base California as part of Engineering and Infrastructure Team.
• The successful candidate will provide engineering and management support of associated facilities.
• The engineering and management support will include, but is not limited to:
• architectural, HVAC, electrical, civil, structural and mechanical systems, maintenance and facility corrosion control activities.
• The Candidate will coordinate the procurement of facility services, equipment, and will perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance.
• The Candidate will perform investigation of anomalies encountered and will be responsible for developing corrective action plans and work documents for both and sub-contractor support. The Candidate will work with various government groups including Air Force and Base Civil Engineering personnel.
• The successful candidate shall prepare Statements of Work with detailed contractor direction, and manage contractor’s activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs/modifications.
• In addition, the candidate will gather information, perform field walk-downs, and create, schedule and manage the performance of maintenance and/or corrective Work Orders performed by represented personnel.
• Support will also include schedule integration and coordination of maintenance activities around launch processing activities.
• Candidate shall have relevant facility engineering experience with an emphasis on architectural facility/building systems operations/modifications.
• The candidate shall perform engineering calculations, trade-studies, designs, evaluations, and rough cost estimates in support of the above engineering activities.
Qualifications:
• Bachelor’s degree from an accredited college in an Engineering or related discipline, or equivalent, with a minimum 3 yrs of professional experience.
• Experience with facilities engineering and plant operations.
• Experience working independently and in a team environment, with both represented and contractor personnel.
• Must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members including represented personnel, customers and subcontractors.
Ability to solve practical problems.
• Able to analyze and interpret data to make sound judgements and recommendations.
• Ability to learn and interpret mechanical and electrical drawings, logic diagrams and technical manuals.
 
Job Number: 19-07891
Job Location: Vandenberg AFB, CA
Rate: Hourly
Per Diem: No
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System (ATA27) Safety Engineer

Description:
We are seeking an experienced System Safety Engineer with a Flight Control Systems background. Interested candidates should have at minimum 5 years of safety assessment experience as well as previous flight control experience.

Responsibilities of the Flight Control System (ATA27) Safety Engineer

To develop and finalize aircraft T/C design to be compliant to all applicable regulatory requirements and produce necessary documents.
Perform all System Safety Assessments on Flight Control Systems.
Create SFHA/SSA/CMA for related systems.
Work on scheduling to resolve problems and mitigate risk.

Requirements of the Flight Control System (ATA27) Safety Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of experience with safety assessment in flight controls (ATA27)
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr (DOE)
12 month W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 11298
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MATERIAL & PROCESS ENGINEER

Description:
Role: : MATERIAL & PROCESS ENGINEER
Location: Centennial, CO
Duration: 10 months’ contract

Job Description:
This contract labor position is for a mid-level to highly experienced Avionics Parts, Material and Processes (PMP) engineer, with responsibilities to include the following:
- Serve as team member within the Avionics PMP Group - ensuring that PMP review, testing and procurement meet project schedule and budget
- Provide Avionics PMP support to Avionics hardware including EEE piece parts, electrical circuit boards, electrical connectors, electrical box assemblies, batteries, and wire harnessing
- Coordinate with designers to ensure proper PMP selection on heritage and major development programs
- Review drawing packages for material and process selection and compatibility with electrical parts
- Evaluate and approve Part Approval Requests (PAR) using physics of failure based reliability principles, including assignment of suitability for the application, and the intended mission profile environment
- Interface with Avionics suppliers in support of Hardware Design, Manufacturing Processes Reviews, Build Instruction Reviews, and Build Anomaly Reviews
- May require up to 20% travel

Position Requirements:
• Bachelor of Science degree in Material Science, Electrical Engineering, Physics, or similar applied science or engineering fields
• Current or previous experience with Aerospace Avionics Parts, Material and Processes including electrical piece parts, wire harnesses, and top assembly boxes
• 10+ years of experience
• Demonstrated experience in the resolution of complex part, material, and process anomalies
• Working knowledge of Military and Commercial parts, materials, and process specifications
• Experience working independently and in a team environment
• Experience with Microsoft Office
• Strong communication skills (verbal and written, including presentation skills)
• Ability to travel when needed
 
Job Number: 19-06183
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Tech/Welder

Description:
Maintenance Technician located in Blawnox, PA.



Experience

Mechanical experience with pumps, hydraulics, pneumatics, etc.


Electrical experience is a plus.



The candidate would have overtime opportunities and would be expected to work overtime.



Hours would be mainly daytime (anywhere from 6:00 am to 6:00 pm but would also need to be available at certain times later at night and on some weekends.




Please send your resume for review and consideration or contact Rami Ashamalla at 412 246 4828 or send your resume at rashamalla@nescoresource.com



Thank you,



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-24215
Job Location: Blanwnox, PA
Rate: 18.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support.
2. Candidates must have experience with Catia V5.
3. Experience with Solumina and SAP is preferred.
4. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11005
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: $50
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Planning Specialist

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
• Interact with Integrated Product Teams (IPT) and Program Management to identify and mitigate risks
• Understand the Master Production Schedule, and communicate with supply chain organization for impacts to schedule
• Create and manage demand to drive material requisition needs
• Provide material position data to support proposals
• Review and approve design layouts
• Participate in make/buy decision and vendor selection processes
• Review, approve and execute the implementation of Engineering Changes
• Request and maintain Material Master data in SAP
• Create and maintain detail inventory shortage report
• Initiate Purchase Requisitions and Change Orders, and Vendor shipments (Returns and Outside processing)
• Initiate material ownership transfer requests

Experience Qualifications:
• Associates Degree in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred
• At least 6 years of experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
• Self-directed; strong planning and organization skills with ability to be adaptable to changing priorities and assignments
• Manage daily tasks and come back with solid results / solutions
• Ability to read engineering drawings
• Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
• Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 1910106051
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
The Mechanical Designer Tech (contract/temp) is responsible for creating marine engineering model and drawing for vehicles detail parts and assembly development using SolidWorks.

Responsibilities:
• Design components and assemblies required for the development and manufacture of company products.
• Create SolidWorks models and drawings with strong understanding of product structure tree.
• Design complex mechanisms, components and/or assemblies from customer specifications or from sketches or engineer’s verbal instructions.
• Provide sketches, dimensioning and tolerancing guidance to detailers in the preparation of parts drawing.
• Perform duties of Product Drafting Checker, Product Designer, Product Layout Draftsman or Product Detailers, as required.
• Performs other job related duties as assigned by management.
Qualifications

Education:
Associates Degree in Drafting preferred.

Position Requirements:
• Five (5) plus years experience in creating 2D/3D models and drawings for electro-mechanical using SolidWorks or similar 3D design package.
• Working knowledge and demonstrated experience with mechanical or electrical engineering design, 3D model and drawing drafting standards.
•Working knowledge and experience working within an EPDM system.
• Understand and practice ASME Y14.100M, ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M, ASME-14.34M and ASME 14.5M.
• Understand basic mechanical assembly requirements.
 
Job Location: New Orleans, LA
Rate: 42-45/hr
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer

Description:
Position requires HDI PCB design experience. HDI PCB Boards contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards. There are 6 different types of HDI boards, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs. Candidate should also have experience routing DDR3, Differential pairs and phase matching of signal up to 10 Gb/s. Must have Cadence Allegro version 16 or higher tool set experience. " IPC certification CID or CID+ preferred.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34998
Job Location: Palm Bay, FL
Rate: 81.08USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-09-08 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Performance Engineer

Description:
We are seeking an experienced Aerospace Engineer with a Flight Dynamic background to fill an opening for a company in Nagoya, Japan. Interested candidates should have 10 plus years of technical aircraft experience as well as experience with aircraft certification.

Responsibilities of the Performance Engineer

Provide technical assistance to the development and certification of the aircraft program, focusing primarily on the design and development including performance software and verification of aircraft performance characteristics.
Initiating and reviewing related documents, technical calculations, interface with team members and all the other stakeholders including systems, structures, manufacturing, customer support and other partners.
Assisting other aircraft performance duties such as analysis of specific phases of flight as well as overall mission, support of flight test activities (data analysis, modeling, report), development of technical manuals (AFM, FCOM, MEL and CDL) and CAFM, analysis of failure scenarios.
Education and mentoring of team members regarding professional knowledge of performance on an on-going basis.
Provide expertise to assist in resolving performance issues identified during any desktop analysis, rig testing or Flight testing.

Requirements of the Performance Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Minimum 10 years of broad engineering experience in aircraft technical disciplines.
Must have excellent written and verbal communication skills in English.
Aircraft certification experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal FPGA Engineer ( Plymouth, MN ) S9410332

Description:
Principal FPGA Engineer ( Plymouth, MN ) S9410332
12 Month Contract

Pay Rate: $60-70/hr , maybe more for the right candidate

**Active Secret Clearance Required

TOP SKILLS: FPGA Design experience, Subject matter expert in coding VHDL/Verilog, preferably experience with Xilinx FPGAs and respective firmware tools. Proficient in digital verification, validation, and debug. Digital logic design experience.

*Roles and Responsibilities -
• Perform FPGA design, simulation, and documentation using product families such as Xilinx Kintex7, Virtex7, Zynq, Ultrascale, RFSoc and Altera Stratix.
• Conduct testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, and FPGA debugging tools.
• Define and develop specifications and test procedures.
• Can review and critique designs created by peers and/or junior engineers.
• Is proficient at recognizing the unique design requirements such as safety and reliability architectures associated with military applications.
• Compiles and analyzes test data to determine design effects on electrical circuits for military applications.
• Define development test plans and methods to ensure a robust design is achieved.
• Strong analytical skills and the ability organize/prioritize job assignments and tasks.
• Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact circuit requirements and design constraints.//

**Basic Qualifications
- Bachelor’s Degree in EE or Computer Engineering and 9 years of relevant experience or a Master’s Degree with 7 years of relevant experience.
- Experience in FPGA design and development using VHDL or Verilog.
• Experience with Modelsim, Xilinx Vivado, Synplicity, MATLAB, Quartus, Simulink.
• FPGA Digital Signal Processing implementation.
• Experience with bus functional models.
 
Job Number: S9410332
Job Location: Plymouth, MN
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planner/Scheduler

Description:
Job Description
Major purpose: Prepares, develops and coordinates the integrated master plan and integrated master schedule to meet all program objectives. Ensures major projects and program schedules and plans are horizontally and vertically integrated across company functional groups including finance, engineering, material, manufacturing, and quality. Tracks plans and schedules, performs risk analysis, identifies and resolves critical path and network logic conflicts. Utilizes Gantt, PERT, milestone charts, earned value management and other project management techniques to gauge progress and identify performance variances to facilitate focus and intervention on critical areas.
Major functions: The Program Planner/Scheduler has primary accountability for schedule performance of Indefinite Delivery/Indefinite Quantity (IDIQ) contracts for the manufacture of components and assemblies for rotary wing aircraft. Duties include the below,
• Track plans and schedules; take action to correct or mitigate material resource plan (MRP) exceptions by working closely with other functional groups and the customer.
• Daily review of schedule constraints; ensure all constraints have an owner and expected resolution date; take action to resolve constraints owned by the Program Office or customer.
• Performs risk analysis and is proactive in schedule risk mitigation.
• Ensures MRP parameters are appropriate; makes changes as needed.
• Prepares regular reports for the Program Manager and customer on status of deliverables.
Technical/Functional skills:
Education/Experience/Licenses etc.: Preferred skills:
• 6-9 yrs with a BA, 4-7 yrs with MBA or relevant yrs of experience in lieu of
• Strong interpersonal skills; can demonstrate successful interaction with cross-functional teams in prior roles.
• Experience in SAP Production Planning module.
• Intermediate level experience with Microsoft Excel.
• Basic familiarity with sheet metal manufacturing operations.

Physical Requirements: Primarily manufacturing/assembly environment. Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current. Must be able to bend and reach. Must have close visual acuity such as viewing a computer terminal, extensive reading, visual inspection involving small defects, small parts, and/or operation of machines, and/or assembly or fabrication parts at close distance to the eyes. Must be able to communicate effectively. Must be able to maneuver up to 20 pounds. Will be performing substantial movements (motions) of the wrists, hands, and/or fingers.
Scope information:
 
Job Location: Crestview, FL
Rate: 33.50/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
We are looking for a Quality Engineer to join our team. The successful individual will provide production support by performing the following activities:



This position supports the plant Quality department and systems to ensure support of process improvements, quality and new product activities, and promotes the use of performance excellence.

Areas of responsibility include:

Plant TL 9000 certification, internal auditing, supplier management, customer satisfaction and management of changes that impact quality metrics and systems. This position reports to the Quality Manager.

Day to Day Responsibilities:

  • Responsible for maintenance of Quality Management Systems

  • Supports preparation for TL 9000 certification

  • Supports document control and change management for the plant

  • Participates and/or leads customer notifications and supplier quality investigations

  • Technical support for first articles and receiving inspection

  • Participates in internal audits of Quality Management Systems

  • Responsible for identifying and providing training for internal auditors

  • Reviews document changes, process evaluations, and product deviations

  • Reviews key quality metrics (PPM) and develops improvement plans for manufacturing areas. Alerts appropriate levels on trends and critical quality issues

  • Responsible for ensuring supplier corrective actions are submitted and addressed in a timely manner

  • Lead/participate in supplier qualification

  • Participates on new product introductions

  • Responsible for ensuring process performance is tracked in key manufacturing areas and data is reviewed and reported

  • Ensures that sampling plans are adequate and Measurement System Analysis (MSAs) are conducted consistently

  • Executes quality assurance processes and systems to ensure that product meets all applicable quality requirements

  • Lead/support process controls and improvement such as identifying key process inputs and outputs, Critical to Quality (CTQ) and process control plan.


Hours of work/work schedule/flex-time:


  • 40 hours per week, additional hours/weekends when needed to support project work/quality issue resolution


Desired Skills:


  • SAP Quality and Material Modules

  • ASQ Certified Quality Engineer and certified ISO 9001 quality auditor

  • Six Sigma Green Belt or DMAIC project experience

  • Use of Lean tools

  • Knowledge reading and interpreting blueprints and Geometric Dimensioning and Tolerancing (GD&T) plans for manufacturing

  • Knowledge using precision measuring instruments

  • Knowledge of manufacturing of Optical assembly components and product attribute


Soft Skills:


  • Ability to work within a team environment (strong team player)

  • Proven self-starter, able to effectively handle high levels of uncertainty and change


Required Qualifications:


  • Bachelor's degree in Electrical Engineering

  • Three to five years of progressive manufacturing engineering experience

  • Jig and fixture design experience

  • Good analytical and problem-solving ability

  • Experience with 3-D CAD programs, such as Solidworks

  • Strong project management skills

  • Hands-on mechanical aptitude

  • Must display maturity and a high level of professionalism

  • Must know Ohms KW and Voltage

  • Must have Automotive Manufacturing experience

  • Proficient in Problem Solving

  • Work 50 hrs /week

  • Must be flexible

  • Carry a heavy work load

  • Proficient in SPC Charts Creating and maintaining

  • Manage the Quality Boards and Charts

  • Proficient in Problem Solving Forms

  • Team Player and work on your own

  • Excellent communicator and presenter


Authorized to work in the US for any employer

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-27978
Job Location: Irving, TX
Rate: 75.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (FRACAS)

Description:
*This is a full time, 9 month contract to hire position, located in York, PA*



We are seeking a contract Reliability and Maintainability (RAM) engineer who will be performing high level math and risk analysis of aerospace models/systems designs that ensure maximum availability and sustainment. Candidate will be using functional Failure Modes Effects and Criticality Analysis (FMECA) and FRACAS to reduce or eliminate risk, using failures modes to assess improvements and update analysis by evaluating test results.



Daily use of block diagrams, Test Incident Reports (TIRs) input into the Failure Reporting Analysis and Corrective Action System (FRACAS) database, working with staff to unearth potential failure modes and mitigate, while tracking modifications to assist in assessing program success. Will use Reliability Enhancement Testing (RET) and reliability demonstration testing.



Required:
*10 years’ experience in Reliability, typically RAM or RM&T, analyzing data sets and identify high drivers.
*Experience performing allocations/predictions, FMECA and FRACAS.
*Familiar with reliability software tools (preferably WQS)
*Understanding of mechanical, electrical, electronic and hydraulic engineering.
*4 year degree in Engineering, Math or other Science



Pluses:
*Knowledge of WQS software
*Familiar with Specialty RAM-T disciplines.
*ASQ CRE Certification
 
Job Number: 501
Job Location: York, PA
Rate: 59.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SCA Aircraft Mechanic II - Clearance KY

Description:
Job Title: SCA Aircraft Mechanic II

Work Site Address: Lexington, KY 40516
Job Number: 1750-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Qualifications and Education Requirements
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

Qty 2 positions needed

This position is for an aircraft mechanic. The candidate will be working on mechanical modifications and repairs.
 
Job Number: JE-1750-1S
Job Location: Greenville, CA
Rate: 31.59/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL ENGINEER-RS 4

Description:
Job Title: STRUCTURAL ENGINEER-RS 4
Location: Vandenberg AFB, CA
Duration: 12 Month Contract

Job Description:

Work duties will include mechanical and structural design for facility support systems as well as creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
Performing walk downs of projects to verify details will be required.
Design work to include solutions to existing issues with current equipment as well as new designs.
Creating of detailed drawings including parts lists and bill of materials.
Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital manipulation.
Perform configuration management and drawing release functions per *** LSP-EI-002.


Basic Qualifications:
Bachelor Degree Required
A minimum of 5 years of professional drafting experience.
Have mastery of AutoCAD drawing program.
Experience with drafting electrical, mechanical and structural designs.
Experience working independently and in a team environment.
Proficient knowledge in Microsoft Office Suite.
The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
Ability to read and interpret mechanical and electrical drawings and logic diagrams.

Preferred Qualifications:
Drafting experience in a variety of design environments.
Expert in AutoCAD 2018. Experience with other CAD programs such as NX and / or Revit preferred.
Associate’s degree plus 6 years or more of directly related experience (for external candidates only).
 
Job Number: 19-07276
Job Location: Vandenberg AFB, CA
Rate: Hourly
Per Diem: No
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer - EHS Specialist

Description:
SAFETY ENGINEER-EHS SPECIALIST

Location: Kalamazoo, Michigan




ROLE SUMMARY

Experience working in a Chemical and Finished Product Manufacturing Environment. Role is responsible for Occupational Safety Compliance (Examples: Job Hazard Analysis, Machine Guarding, Electrical Safety, Lockout Program, and Lab Safety).

Primarily responsible for providing technical Safety Subject Matter Expertise to Pharmaceutical Kalamazoo business units by way of assessing safety risks to ensure a safe workplace, a high standard of compliance with MIOSHA regulations and Pharmaceutical Global Environmental Health and Safety requirements.

Experience in assessing risks, developing and implementing proactive strategies to eliminate incidents and process deviations as it relates to safety.

Provides expert technical support to Pharmaceutical business areas relative to High Hazard Industrial



Safety Compliance: 

  • Conducts routine safety inspections.

  • Evaluates capital projects to assure compliance with safety requirements These projects could be in manufacturing of Active Pharmaceutical Ingredients, in Drug Product packaging & filling lines (Both Aseptic & Non- Aseptic), along with Maintenance, Utilities, and Warehouse environments.


ROLE RESPONSIBILITIES

• Enjoys working independently to identify safety risks and compliance opportunities and propose solutions.

• Evaluates existing and new processes/practices. Updates compliance program improvements, associated procedures and creates plans for implementation of improvements.





Education Requirements:

• Bachelor's Degree in Engineering, Chemistry or Occupational Safety & Health.



Required Qualifications

• At least 3years of experience in successfully implementing Safety programs in a manufacturing environment.

• Experience in assessing EHS risks, developing and implementing proactive strategies to minimize risks and process deviations.

• Successfully uses recognized analysis tools to perform risk assessments, investigations, program auditing that result in identifying improvements.

• Ability to manage projects, is process minded, and demonstrates the ability to build and execute action plans to ensure alignment in pursuit of organizational deliverable.

• Demonstrates initiative, leadership, has excellent organizational, planning, interpersonal and problem-solving skills.

• Excellent written and communication skills.

• Competency in MS Office.

• Demonstrated ability to successfully influence and engage with multiple levels of

the organization and the proven ability to lead cross functional teams is required.



PREFERRED QUALIFICATIONS

• Working knowledge in the areas of Industrial Hygiene.

• Project Management Experience

• Experience implementing lean concepts.



PHYSICAL/MENTAL REQUIREMENTS

• Must be able to perform field observations which could involve walking or

standing on uneven terrain, squatting, bending, twisting, turning, and reaching

above shoulder height and work in various climates from extreme cold to heat.

• Able to lift and carry minimum 25 lbs. occasionally

• Able to stand or walk for periods of 8 hours or more

• Sit for extended periods of time

• Able to meet deadlines, both internally and externally

NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT

REQUIREMENTS


Candidates are expected to be on call. The position at times will require working varying shifts

to support the needs of the EHS organization and the business



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-30577
Job Location: Kalamazoo, MI
Rate: 78000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-07-24 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Embedded Software Engineer - Secret Clearance

Description:
***MUST HAVE ACTIVE SECRET CLEARANCE***



REQUIREMENTS


1. Must have Real Time Operating Systems Experience

2. Experience with C++ and/or Ada



QUALIFICATIONS

•A Bachelor's degree in Computer Science, Electrical Engineering, or related engineering field

•9+ Years of Embedded Software Engineering experience

•9+ Years' experience with C++

•9+ Years Real Time Operating Systems Experience



PREFERRED ADDITIONAL SKILLS

•EW Background

•Capable of working on both high and low level software

•VxWorks or similar embedded OS experience

•UML design experience



Job Description:

Responsible for research, design, and development of computer software systems, in conjunction with hardware product development. Primarily responsible for the design and development of software products for a variety software applications. Participates in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and test of software products. Applies computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target application. Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system. Develops software test procedures, software programs, and related documentation. Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure software performed meets program cost, schedule, and technical constraints.



Job Requirements:

MUST have a BA/BS Degree MINIMUM

MUST have an ACTIVE SECRET CLEARANCE

Recognized as an internal expert and thought leader in area of expertise with broad experience across multiple job areas.

Works under consultative direction against annual goals to manage large, complex project initiatives of strategic importance to the organization.

Communicates within and outside of the organization to influence leadership to accept new practices, approaches, and concepts.

Develops or champions new systems, concepts, or technologies.

Recommends tactics and strategies that directly impact the achievement of overall business or functional results.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
 
Job Number: 19-35547
Job Location: Clifton, NJ
Rate: 115.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-09-02 00:00:00.0
Start Date: 2019-09-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Hydraulics Systems Modelling Engineer - China

Description:
Our Aerospace Client based in China is looking for additional engineering Support. They require a Senior Performance & Dynamics Engineer. This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

The Senior Performance & Dynamics Engineer will be involved in conducting performance and dynamic analysis for  mechanical, hydraulic and occasionally basic electrical systems as they relate to aircraft, hydraulic, landing gear, extension/retraction, brake and steering. This engineer is also required to support requirements definition, and validation, verification test activities and  assist with the development of methods and tools. Possessing in-depth knowledge of mechanical and hydraulic systems, this engineer will generate strategies as they relate to performance and dynamics activities on given programme(s).


Key aspects of this job include the following:

 

  • Build computational models and run simulations.
  • Calculate static and dynamic loads.
  • Conduction performance and frequency response analysis.
  • Conduct stability, shimmy, model analysis and failure case analysis.
  • Correlate and validate computational models.
  • Write and validate performance and dynamic requirements.
  • Define and document simulation cases and pass/fail criteria.
  • Optimise design solution in conjunction with other engineering disciplines.
  • Define test requirements and analyse and interpret test results.
  • Adherence to the programme schedules.

Skills/ Qualifications / Experience Sought:

 

  • Knowledge of landing gear systems / hydraulic systems.
  • Experience of dynamic analysis and computational modelling and simulation.
  • Experience of model correlation and validation.
  • Knowledge of airworthiness requirements and certification.
  • Basic knowledge of systems and electrical engineering.
  • Working knowledge of MATLAB/Simulink, ADAMS and AMESim.
  • Sufficient experience to write requirements.
  • Minimum 20 yrs of related working experience in related landing gear or hydraulics.
  • Had working experience with major airframers or major suppliers.
  • Fluent English, with good communication skills.

 
Job Number: BH-59-3
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 08/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Software Engineer - Clearance FL

Description:
166254/1793
Senior Principal Software Engineer - Contract Labor (Job Number: 19017468)

Number of Openings: 4

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Sep 9, 2019

Target End Date: Sep 4, 2020

Requested Hourly Pay Rate: 72.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

Length of contract is up to 12 months with option to hire.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 9 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 7 years of software engineering experience.
•Experience developing software / writing code in C/C++ or Ada
•Experience with Linux


Preferred Qualifications:

•Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
•Strong Problem Solving Skills
•Experience in Software Test
•Familiarity with Atlassian tool suite and tools like git and Confluence
•Familiarity with Agile software development process
•DOORS experience
•Eclipse or other integrated development environment (IDE)
•Knowledge of Linux systems with basic commands
•Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
•Experience with OpenGL
 
Job Number: JK-1793S
Job Location: Melbourne, FL
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Engineer

Description:
Job Description
Major purpose: Performs a variety of quality-related functions in support of regulatory, customer, and company requirements/objectives. Coordinates/develops/monitors/maintains necessary procedures, controls, and/or programs to assure compliance/conformance to regulatory, customer, and company requirements.
Major functions: ESSENTIAL DUTIES AND RESPONSIBILITIES
• Perform product quality audits to assure compliance with customer, drawing, internal, and regulatory requirements
• Perform system audits in support of the Quality/Environmental Management System
• Coordinate close out of audit findings through, creating audits finding reports and determining proper corrective and preventive actions with the lead of the area being audited
• Coordinate needed actions to support continued ISO/AS9100 certification, preferred supplier status, and AS 9001 certifications (required for Government Quality Engineers)
• Provides liaison activities with customers and suppliers on all quality-related activities
• Review, identify, implement and maintain Customer Quality flow down requirements
• Perform review of bid and proposal quality clauses and provide compliance matrix
• Perform review of customer quality clauses, quality documents and provide compliance matrix
• Support Operations to ensure that products and processes comply with the relevant requirements of the quality management system
• Review trend analyses related to field returns, manufacturing rejects, supplier history, etc and provide recommendations for improvement
• Perform design review activities including inspectability, consistency, adequacy, accuracy, and conformance to customer requirements and provide recommendations for improvement
• Interfaces with all departments at all levels
• Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for internal and external customers
• MRB/ECN Board representation and duties
• Responsible for participating in continual improvement activities to enhance the quality system, such as 5S, Kaizen lean methods, etc
• Employs mistake-proofing techniques
• Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data
• Identify, implement and maintain Customer Quality flow down requirements
• Perform FAA Designee authorized functions
• Responsible for performing job duties in a manner consistent with established L-3 Ethics Standards
• Responsible for working in a manner consistent with established safety rules and regulations
• Performs job duties in accordance with approved procedures established in support of Sarbanes-Oxley regulations
Technical/Functional skills:
Education/Experience/Licenses etc.: MINIMUM REQUIREMENTS
• Bachelor’s degree in Mechanical or Electrical Engineering. Masters' preferred.
• 5 or more years’ experience as a Quality Engineer in Aerospace parts manufacturing as well as planning experience in an electronics manufacturing environment with some experience related to custom products.
• Knowledgeable of concepts, practices, policies/procedures, internal engineering, manufacturing and project management functions.
• Requires excellent oral and written communication skills, strong interpersonal skills. Ability to develop relationships with all levels of personnel.
• Familiarity with AS9100, D0-178, D0-254 and aviation regulations (required for Government Quality Engineers)
• Working knowledge of quality concepts and tools (i.e., six-sigma, TQM, QFD, SPC, SQC, DOE, ANOVA, etc.)
• Proficient with quality systems software and business desktop software programs
• Experience in quality analysis techniques (statistical analysis, problem solving, process mapping, SPC, Root Cause and CAPA process)
• Interact effectively with management, peers, and other employees relative to quality and technical issues.
• The individual must have demonstrated ability to work independently with minimum oversight and be proficient in MS Word, Excel, and PowerPoint, as well as with Minitab.
 
Job Location: Alpharetta, GA
Rate: 43-47/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Signal Intelligence Engineer SIGINT

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



We are a defense subcontractor who is working on secret and top secret military aircraft.

The position we have is for a Signals Intelligence (SIGINT) Engineer who will be working on a strategic sensor system (tactical system) and define specifications, conduct design/development, work with production/implementation/integration, while performing testing/qualification/checkout and troubleshooting.



As part of the responsibilities of this position, candidate will be working with sensor suppliers and managing the duties needed for the SIGINT, developing and integrating of the sensor system.




Required:

*Experience in working as a SIGINT Signals System Engineer

*Strong full life cycle experience in SIGINT systems design through manufacturing, implementation and testing/troubleshooting.

*4 Year degree in Electrical Engineering

*Active Top Secret Clearance (last investigation within 5 years)



Pluses:

*Sensors or instrumentation experience
 
Job Number: 429
Job Location: Palmdale, CA
Rate: 429
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Active Secret or Interim required
Responsible for research, design, and development of computer software systems, in conjunction with hardware product development.
Primarily responsible for the design and development of software products for a variety software applications.
Participates in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and test of software products.
Applies computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target application.
Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.
Develops software test procedures, software programs, and related documentation.
Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure software performed meets program cost, schedule, and technical constraints.
Senior professional with strong knowledge of job area and broad knowledge of project management.
Manages complex projects or processes with general oversight.
Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures.
Makes moderate to substantial improvements to systems and processes.
Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.


Education/Experience:

Bachelor’s Degree in Computer Science, Electrical Engineering, or related engineering field
4 years of experience
MUST HAVE Real Time Operating Systems Experience
MUST HAVE C++ and/or Ada
NICE to have Embedded background & Electronic warfare knowledge
 
Job Number: 50759
Job Location: Clifton, NJ
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer - Clearance NY

Description:
Request number: 6170
Job title: Sr. Design Engineer
Number of openings: 3
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 70/hr
Start Date: 09/23/2019
Tentative End Date: 09/21/2020

Job Description

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneurnatic components and systems that will become the new products of Moog, Inc. The incumbent plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Senior Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others.

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the Division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Senior Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department or he/she might report directly to the Chief Engineer. The incumbent requires guidance on general assignment objectives and critical issues, but he/she is expected to make independent and unreviewed decisions on most technical matters. His/Her work is periodically reviewed for application of sound professional judgment as it applies to meeting overall program and company objectives.

The Senior Design Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent's operating as a part of a design team will be responsible for the physical hardware design. He/She must oversee the efforts of drafting personnel and Assembly & Test Technicians. In this role he/she must be an inspirational leader, a creative problem solver, and must be sensitive to feedback from team members to identify and resolve problems before the design is released to production.

In the early stages of a new program, the Senior Design Engineer will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations.

During the design and development phase the Senior Design Engineer will initiate and carry out any analyses necessary to ensure the integrity and conformance of the design. These will include stress analysis, fracture mechanics, thermal analysis, and producibility analyses. The incumbent is responsible for selecting the materials, fits, heat treatment and finishes used in the design. He/She must be familiar with the properties and characteristics of materials and processes used in Moog hardware, and with all standards and requirements pertinent to the Division's industry, such as Military, FAA, and NASA specifications.

The Senior Design Engineer is responsible for actively communicating with the involved Division personnel who will be manufacturing hardware. He/She must frequently communicate with Reliability, Environmental Test, and Test Equipment Designers to keep them current on design status and ensure compatibility with their activities. Frequent consultation during both the proposal and design phases with the Manufacturing and Product Engineering personnel is crucial. Often these groups must be motivated and persuaded to consider novel or unorthodox methods of manufacture and test in order to preserve the simplicity or integrity of the design. The incumbent also must be sensitive to the expertise of manufacturing personnel, responding to their suggestions when appropriate. A delicate balance must be struck to achieve high producibility and cost effective parts and assemblies that satisfy quality and performance goals. The Senior Design Engineer is expected to provide the leadership and cooperation to ensure this happens.

The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

This individual will represent a high level of design problem solving in the Company. He/She must often act as a technical consultant for other programs both in development and in production. The incumbent must be able to communicate fluently to audiences representing a wide variety of skills, background, and disciplines. Travel, sometimes frequent, will be required to communicate with customer engineering groups. The Senior Mechanical Design Engineer's primary responsibility is the mechanical design of often complex servornechanisms, while that of the Senior Electrical Design Engineer is the design of complex electronic control hardware. In both cases this includes working with the customer to understand and define the design constraints, helping to write a winning proposal, conceiving novel mechanical or electrical solutions, performing design analysis, developing hardware, providing accurate and proper documentation of the design, and designing for producibility. He/She must be prepared to sell the features of the design and its implementations to both the customer and the division personnel who will be manufacturing and supporting the design.

To achieve the position of Senior Design Engineer, an individual will have at least a BS degree in electrical engineering with extensive experience in creating successful designs of electrohydraulic, electromechanical, mechanical and/or electropneurnatic servornechanisms and their control electronics. For a Senior Mechanical Design Engineer broad background in design analysis, including stress analysis, kinematics, strength of materials, fluid mechanics, and vibration is essential. Experience with closed loop systems, fluid power control, servornechanisms, fracture mechanics and Computer Aided Design is desirable. A Senior Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components. Most important is a proven record of accomplishments including successfully developed and produced designs and a demonstrated ability to participate in a product design team.

ACCOUNTABILITIES:

1. Develop new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume.

4. Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.

8. Consult on new product and market development efforts.

9. Maintain currency with materials technology, industry design requirements (Military, FAA, NASA, etc.), and modern design analysis tools.

10. When applicable supervise subordinate engineers and project/product engineering technicians.

Other Requirements
MUST have at least a BS in Electrical Engineering w/ 7-10 years of experience - not looking for FPGA

Sr. Design Engineer – Pre-Screen Questions
1. Please confirm if you have a verifiable Active Secret (Interim Secret is not sufficient) clearance.

2. Please describe your practice technical experience using the following:
a. Design of power supplies
b. Design of magnetics

3. Please describe your ability to perform detailed analysis of the following:
a. Small Signal analysis
b. Sneak Circuit analysis
c. Worst Case analysis
d. Timing analysis
e. Tolerance analysis
f. Power dissipation analysis
g. Radiation analysis
h. Stability analysis
 
Job Number: MB-6170S
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Subsystem Engineer

Description:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification



We're looking for someone who has:
• Bachelor’s Degree in a relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent relevant experience in developing electrical systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Proven problem-solving skills across multi-disciplinary skill sets
• Experience with CATIA V5 and Teamcenter PLM desired



The Structures Company is an AA/EOE.
 
Job Number: 331
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Circuit Design 5 CA

Description:
Staff Engineer Circuit Design 5 (Job Number: 19016165)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Aug 26, 2019

Target End Date: Aug 21, 2020

Pay Rate: $85/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Northrop Grumman Aerospace Systems has an opening for an Engineer Circuit Design 5 to join our team of qualified, diverse individuals. This position will be located in Manhattan Beach, CA.

The qualified candidate will be an experienced digital design engineer who will work on multi-million gate ASIC and FPGA developments in the areas of digital communications, signal processing, network routing and switching applications, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Conceptual Design
- Circuit Design
- Architecture Development
- VHDL Coding
- Design Verification
- Integration & Test


Basic Qualifications:

- Bachelor of Science Degree in Electrical or Computer Engineering
- Minimum of 14 years of experience in digital logic design and/or verification or
- Masters Degree plus 12 years of experience.
- Thorough understanding of high reliability ASIC and FPGA design and verification methodologies and processes

Preferred Qualifications:

- Master's plus 12 years of experience in digital logic design and/or verification
- Expertise in advanced verification methodologies and techniques including constrained random verification using System Verilog and OVM/UVM, assertions and functional coverage using PSL or SVA and modeling using C/C++, System Verilog or System C
- Hands-on testing ASIC/FPGA designs in emulation or flight hardware
- Experience in phases of digital design including requirement capture, architecture trade, implementation, integration, and test
- VHDL coding, design assertions, backend design (synthesis, design-for-test, timing analysis, power estimation
- Foundry interface (netlist handoff, place & route, timing closure, manufacturing vector generation)
 
Job Number: JK-1774ATO
Job Location: Redondo Beach, CA
Rate: 85/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Support Equipment Design/Engineers - Electrical-Electronic

Description:
*Must have Active Secret Clearance
*BS Engineering Degree
Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Support Equip
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / EMC / PSPICE ORCAD MATLAB EXCEL / Aircraft component level Electromagnetic Compatibility (EMC) compliance testing - Clearance TX

Description:
166038
Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 1978-1
Max Pay Rate: $65.92/hr
Start Date: 9/4/2019
End Date: 12/5/2020
Position Type: Contract

Job Summary:
Performs EME (ElectroMagnetic Effects) requirements definition. Analyzes and tests equipment, subsystems, and aircraft to assure proper operation within the electromagnetic environment. Provides design authority for electrical bonding, wire harness shielding, wire routing, electrical ground system design, and general equipment shielding designs. This position will require some travel both domestically and internationally that typically can extend from one to two weeks in duration.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Experience with aircraft/component level Electromagnetic Compatibility (EMC) compliance testing.
Familiarity with MIL-STD 464 and MIL-STD 461.
Proficiency with analysis tools such as PSpice (ORCAD), MATLAB and EXCEL.
Ability to flex time to cover testing at multiple locations across the US

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Electrical No 1


Qty 1 position needed
 
Job Number: JE-1978-1TS
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer ( Northridge, CA ) S9436479

Description:
Systems Safety Engineer ( Northridge, CA ) S9436479
6 Month Contract to Hire, high potential to convert

Pay rate: $70-100 /hr , flexible for the right candidate

Clearance: Active DoD Secret level clearance required

Interviewing ASAP

Qualifications:
- Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
• Minimum 7 years of related experience.
• High level understanding of tactical missile subsystems.
• Proficient with MS Office suite of products.
• Strong interpersonal skills and an ability to build effective working relationships are a must.
• Excellent attention to detail.
• Excellent oral and written communication skills and technical writing experience.
• Ability to communicate findings to varied audiences to gain support or resolve concerns.
• Self-starter capable of performing and prioritizing assigned tasks with very little direction.
• Familiarity with requirements development and risk management. //

Key responsibilities include:
• Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
• Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
• Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs
• Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
 
Job Number: S9436479
Job Location: Northridge, CA
Rate: Open
Per Diem: no
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer III

Description:
Location: Savannah, GA
Rate: $37.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.

Education and Experience Requirements:
1. Bachelor's Degree or equivalent experience in the authoring of technical publications required.
2. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications.
3. Knowledge of basic aircraft system methodology or equivalent technology is required.
4. Proficiency in computer technology/software and typing skills is required.
5. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.

Position Purpose:
1. Directly responsible (either individually or with other team members) for the development of technical publications.
2. This can include special projects, research and development, and aircraft safety-related content.
3. Support the complete workflow process to ensure successful development and revision of technical publications.
4. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:
Essential Functions:
1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft.
2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation.
3. Provide training support on complex system operation and technical publications software and processes.
4. Participate with publications team to ensure department workflows and business processes are followed.
5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements.
6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures.
7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity.
8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities.
9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model.
10. Assist in the development of solutions to resolve technical data challenges.
11. Collaborate with leadership, team members, and other departments to develop/implement special projects.
12. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of aircraft system methodology gained through practical experience is required.
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret engineering data is required.
4. Experience with 3-D data is desired.
5. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Number: 11212
Job Location: Savannah, GA
Rate: $37.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer III

Description:
Location: Savannah, GA
Rate: $37.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.

Education and Experience Requirements:
1. Bachelor's Degree or equivalent experience in the authoring of technical publications required.
2. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications.
3. Knowledge of basic aircraft system methodology or equivalent technology is required.
4. Proficiency in computer technology/software and typing skills is required.
5. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.

Position Purpose:
1. Directly responsible (either individually or with other team members) for the development of technical publications.
2. This can include special projects, research and development, and aircraft safety-related content.
3. Support the complete workflow process to ensure successful development and revision of technical publications.
4. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:
Essential Functions:
1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft.
2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation.
3. Provide training support on complex system operation and technical publications software and processes.
4. Participate with publications team to ensure department workflows and business processes are followed.
5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements.
6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures.
7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity.
8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities.
9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model.
10. Assist in the development of solutions to resolve technical data challenges.
11. Collaborate with leadership, team members, and other departments to develop/implement special projects.
12. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of aircraft system methodology gained through practical experience is required.
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret engineering data is required.
4. Experience with 3-D data is desired.
5. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Number: 11211
Job Location: Savannah, GA
Rate: $37.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction. Mentor Graphics experience a major plus.
 
Job Number: Wire_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search