Job Search Results

377 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/11/25 Wednesday 12:01PM Pacific Time by ContractJobHunter. )

Listings 1 - 377

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering / surface mount / IPC-610 or IPC J-STD-001 Certification - 2nd Shift - no clearance FL

Description:
166759 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2259-1
Max Pay Rate: $20/hr
Start Date: 12/9/2019
End Date: 11/20/2020
Position Type: Contract / 2nd Shift

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
• Must have a minimum of 3 years of experience as a SMT touch up or rework assembler and have above average surface mount and fine pitch soldering skills.
• Ability to hand solder components using soldering station
• Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids, insufficient solder, solder shorts, solder bridges, misaligned parts or leads, tombstoned and or billboarded components and any other solder defects that may occur during the SMT operation.
• Able to read instructions, identify standard SMT components and interpret assembly drawings.
• Able to work in a fast-paced environment where some overtime may be required.
• Able to sit for long periods of time and focus on tedious tasks.
• Strong communication and organizational skills and ability to work in a team oriented environment
• Experience working in a LEAN Manufacturing environment.
• Have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• IPC-610 or IPC J-STD-001 Certification

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills J-STD-001 Yes 1 2 - 4 Years
Technical Skills Soldering Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years

Qty 8 positions
2nd Shift
 
Job Number: LMRMS-2259-1
Job Location: Oldsmar, FL
Rate: 20/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

Description:
165856
Avionic Technician
Greenville,SC 29605
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


Qty 3 openings
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG -1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Certification Engineer

Description:
Support the verification and test of high-performance Avionics hardware and systems.
• Perform system and component-level avionics requirements validation and verification
• Document failure mode, effects, and critical analysis (FMECA) cases and pursue corrective actions
• Write and update technical documentation for certification
• Capture and communicate technical risks and waivers
• Analyze test and flight data, to help with verification activities
• Detailed electronics design and analysis experience
• Experience with DO-160, MIL-STD-1540, or SMC-S-016 Environmental test standards
• Familiarity with ARP4754A, DO-254 and DO-178 and related Design processes
• Experience / exposure to IBM DOORs tool
 
Job Number: 4545
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
Experience with aircraft systems

Desired Skills:
1. Experienced in design, development, integration and test of datalink systems.
2. Familiar with DoD contracting and product acquisition.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11681
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
1. Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
2. Any familiarity with JSF avionics suite or systems engineering processes.
3. JSF program clearance.
4. Good communication and analytical skills.
5. Experience designing, programming and testing mission data
6. Experience in data analysis of Combat Integrated Mission System
7. Experience with Electronic Warfare Integrated Reprogramming (EWIR)
8. Hands on lab testing of RF systems
9. Experience with Foreign Military Exploitations (FME)
10. Proficient with Microsoft Office products and Database applications

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11673
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in a related technical field
2. Experience with mission systems/avionics

Desired Skills:
1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
4. Prior supplier management experiences a plus.
5. Familiarity with JSF toolsets: SIMS & PDM.
6. Current F-35 program experience and clearances.
7. Must be able to acquire a SAR clearance.
8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11623
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS in technical discipline and at least one year professional experience
2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired Skills:
1. Knowledge of RF, EW and/or CNI
2. Ability to understand and apply electronics engineering principles to development
3. Experience developing subsystem design/engineering documentation.
4. A working knowledge of tools for requirements and verification Traceability.
5. Experience with Agile Methodology
6. Ability to work with suppliers to generate verification and validation plans
7. Strong oral written communication skills
8. Strong interpersonal and collaboration skills
9. Strong work ethic and self-motivation

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11625
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired Skills:
1. MATLAB and/or C++ for analysis tool development
2. Familiarity with JSF avionics suite and systems engineering processes.
3. Familiarity with data analysis tools (e.g. Matlab)
4. Familiarity with JSF tools including SIMS and Dimensions
5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11628
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
1. Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
2. Any familiarity with JSF avionics suite or systems engineering processes.
3. JSF program clearance.
4. Good communication and analytical skills.
5. Experience designing, programming and testing mission data
6. Experience in data analysis of Combat Integrated Mission System
7. Experience with Electronic Warfare Integrated Reprogramming (EWIR)
8. Hands on lab testing of RF systems
9. Experience with Foreign Military Exploitations (FME)
10. Proficient with Microsoft Office products and Database applications

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11624
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer (Active Clearance)

Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
Comments for Suppliers: Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.
 
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / RF flight test EWS ECM EW Radar TX

Description:
166522 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2179-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
• Any familiarity with JSF avionics suite or systems engineering processes.
• Good communication and analytical skills.
• Experience designing, programming and testing mission data
• Experience in data analysis of Combat Integrated Mission System
• Experience with Electronic Warfare Integrated Reprogramming (EWIR)
• Hands on lab testing of RF systems
• Experience with Foreign Military Exploitations (FME)
• Proficient with Microsoft Office products and Database applications



Qty 2 positions
 
Job Number: JE-2179-1ATO
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166416
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2086-1
Max Pay Rate: $62.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Qualifications
Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.
Desired skills
Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
• Any familiarity with JSF avionics suite or systems engineering processes.
• JSF program clearance.
• Good communication and analytical skills.
• Experience designing, programming and testing mission data
• Experience in data analysis of Combat Integrated Mission System
• Experience with Electronic Warfare Integrated Reprogramming (EWIR)
• Hands on lab testing of RF systems
• Experience with Foreign Military Exploitations (FME)
• Proficient with Microsoft Office products and Database applications


Qty 1 position
 
Job Number: JE-2086-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166417
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2147-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+0-3 YRS
Basic Qualifications
BS in technical discipline and at least one year professional experience
Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired skills
Knowledge of RF, EW and/or CNI
Ability to understand and apply electronics engineering principles to development
Experience developing subsystem design/engineering documentation.
A working knowledge of tools for requirements and verification Traceability.
Experience with Agile Methodology
Ability to work with suppliers to generate verification and validation plans
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation

Qty 1 position
 
Job Number: JE-2147-1S
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166415
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2084-1
Max Pay Rate: $62.26/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

CNI, Radar, EW, or related avionics functions technology, and product development experience.
Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Basic Qualifications
Bachelor's degree in a related technical field
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2084-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician / Avionics modification experience / URGENT URGENT SC

Description:
166011 Job Title: Avionics Technician

Work Site Address: Greenville, SC 29605
Job Number: 1968-1
Max Pay Rate: $29.00/hr
Start Date: 9/2/2019
End Date: 12/19/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qty 3 positions needed
The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

Areas of Expertise P-3 No 3 4 - 6 Years
Technical Skills Electrical Testing No 2 4 - 6 Years
Technical Skills Read Electrical Schematics No 1 4 - 6 Years
 
Job Number: JEG -1968-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Inspector

Description:
Great opportunities in Tempe 2nd & 3rd shift for CMM Inspectors - no programming.  Semi-conductor or Aerospace experience is preferred.

Performs mechanical inspections of products to determine conformance to the customer's Engineering prints and specifications, utilizing standard mechanical instruments, CMM's, functional gauges, test fixtures, and electronic diagnostic instruments for variable data collection. Follows Manufacturing plans and inspection procedures to report product status accurately, record "turn backs” for resolution, and identify nonconforming material to be properly documented and segregated. Prepare and use standard documentation for reporting variable test data, SPC, and detailed inspection plans for the purpose of recording measurement results. Be able to exhibit an accuracy in judgment for ascertaining critical components and possess administrative qualities for document collection. Perform process/product audits, over-checks for product validation, and review product history for trends and analysis.



Knowledge and Abilities:



Skill-set required to conduct receiving inspections using standard mechanical, and electrical instruments, functional gauges, test fixtures and utilizing CMM's with existing Part Programs. Additionally have good basic math aptitude and organizational skills. Ability to read engineering drawings interpreting GDT per Ansi Y14.5, technical specifications, product certifications, manufacturing planning, and inspection procedures. Ability to interpret SPC plans and results, analyze SPC data for Manufacturing Improvements, understand and perform Gage R&R studies. Report product status accurately, record "turn-backs” for resolution, analyze product history for trends and identify nonconforming material to be properly documented and segregated using Computer software. Prepare and use standard documentation for reporting and detailed inspection plans for the purpose of recording measurement results on Computer software . Perform process / product audits, over-checks for product validation, and review product history for trends and analysis. Inspector is expected to have a comprehensive understanding of appropriate workmanship standards and be able to use sampling plans to establish product acceptance in line with the customer's specifications. Possess a fundamental knowledge of manufacturing processes, familiarity and knowledge of machining, and a basic understanding of special processes (i.e heat treatment, plating, welding, etc.).



Education and Experience:



High School Diploma or GED required. Must have a minimum of 3-5 years inspection experience in a manufacturing environment. Preference to have mechanical experience with semi-conductor products and/or aerospace products and assemblies.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-40318
Job Location: Phoenix, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-09-27 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Combat Vehicle Mechanic

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.
Combat Vehicle Mechanic
(U.S. Citizenship Required*)
Sumner, WA
2019-9660

Responsibilities:
• Provide a broad spectrum of services dependent upon the organization they support.
• To ensure the flexibility to meet customer requirements, must be capable of performing a variety of tasks including scheduled and unscheduled maintenance, troubleshooting, repair and retrofit (improve invulnerability and survivability) on the Army’s Stryker family of vehicles (FOVs) components pursuant to applicable contracts within the organization.
• Repair of Driveline components including Differentials, Wheel Drives / Steer Wheels, Transfer cases and other related components.
• Scheduled maintenance: Periodic and preventative manufacturer (in accordance with the IETM) required maintenance to extend the life of the vehicle and/or performing upgrades as mandated during a designated period of time by customer.
• Unscheduled maintenance: The emergent, corrective or restorative maintenance requirements not previously planned or programmed but require prompt attention and must be added to, integrated with, or substituted for previously scheduled workloads.
• Troubleshooting: Systematically identifying issues and problems within the complex mechanical systems, electronics, computers and software systems within the Stryker family of vehicles.
• Meet safety requirements with OSHA, ANSI and ASME industrial standards, compliance and technical training, administrative duties to meet contract obligations and organizational requirements, adhering to Federal Acquisition Regulation (FAR) compliance.
• Other duties as may be required / assigned.

Qualifications:
• The ability to use calibrated measuring equipment such as micrometers, height and depth gauges and other associated tooling.
• Work in improved and unimproved maintenance facilities as well as field environment.
• Ability to work independently with minimal supervision and organize/prioritize multiple tasks.
• Must be able to foster and enhance teaming environment.
• Working knowledge with Microsoft Office software including Word, Excel, PowerPoint, Access and Lotus Notes preferred.
• Proven ability to perform multiple tasks within multiple work stations.
• Demonstrated good housekeeping skills and ability to convey such practices to team members.
• Ability to work extensive extended hours in a fast paced, challenging, high pressure environment.
• Ability to be issued and maintain company AMEX card
• Ability to deploy and meet requirements where and when needed to support
• fielding missions.
• CONUS and OCONUS as required
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma combined with 3-5 years mechanic experience maintenance on tactical/combat vehicles preferred (- 91B, 91S, 63S, 63W or 63B MCM or USMC MOS' 2147, 3521, 3522, 3524) Experience on Stryker, LAV 2.5 or LAV III desirable.
• Documented commercial training and/or experience acceptable in lieu of military vehicle experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9660
Job Location: Sumner, WA
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Design and Analysis Engineer 4

Location: Long Beach, CA
Duration: 12 Months

Description:
Position Responsibilities:
- Leads works with customers and suppliers to develop and document complex electronic and electrical system requirements.
- Leads and coordinates work to analyze and translates requirements into system, hardware and software designs and interface specifications.
- Leads work to test and validates hardware/software to ensure system designs meet operational and functional requirements.
- Perform lab integration testing as required.
- Participate in airplane ground and flight tests as required.
- Provide in-service technical support and troubleshooting to airlines and modification sites.
- Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
- Solves problems and provides support of hardware and software over the entire product lifecycle.
- Researches innovative technologies for potential application to company business needs.
- Position requires close coordination and teaming with other internal and external Engineering teams.
- Mentoring and training new employees.
- Makes recommendations for technology investments.

Preferred Skills / Qualifications:
We work with a diverse set of technologies, but most of all we value engineers who are eager to learn new ways to deliver value to our customers.

Analytical Skills (Technical):
Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.

Certification & Qualification:
Knowledge of verification, validation, certification and qualification processes and procedures (e.g. DO-160 and D6 requirements), including knowledge of governing regulations and compliance requirements. Ability to assess and document test or analysis data to show compliance.

Circuit Design:
Knowledge of analog and digital circuit design and packaging techniques.

EMI/EMC:
Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).

Hardware/Software Development:
- Knowledge of programming languages (e.g., C#, Java, Java 2 Enterprise and Mobile Editions (J2EE, J2ME), C++, Visual Basic, C, Assembly, Ladder Logic, Numerical Control (NC) Programming, Matlab).
o Knowledge of communications, networking, and protocols (e.g., Transport Control Protocol/Internet Protocol (TCP/IP), File Transfer Protocol (FTP), Extensible Mark-up Language (XML), Wireless Access Protocol (WAP)).
- Knowledge of computing equipment and its operating systems (e.g., Windows, UNIX, Linux). Knowledge of software development and testing tools (e.g., editors, compilers, linkers, desktop simulations, configuration management tools, requirements management tools) capability and usage.
- Ability to apply knowledge of database engines to the design of databases and reporting structures.
- Ability to integrate hardware and software components into a functional system.
- Knowledge of software testing and usability theory.
- Knowledge of testing, usability practices.
- Ability to write and execute test scripts and perform usability analyses.

Product:
Knowledge and understanding of Connectivity and In-flight Entertainment (IFE) systems for commercial airplanes.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Number: 19-13849
Job Location: Long Beach, CA
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 10/18/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer(Support Electrical Equipment Design)

Description:
Active Secret Clearance(Required)
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
 
Job Number: D&A_MO
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Checker

Description:
Major purpose:

Responsibilities

• Plan, layout and revise detailed electrical parts, assemblies, and installation engineering drawings from basic layouts, established references, and standard data such as structures, devices, mechanics, electrical, or electronics

• Utilize computer-aided design equipment and/or graphic tools such as, AutoCAD and SolidWorks

• Complete details of major layout drawings prepared by others in accordance with standard engineering drafting practices

• Prepare specifications for parts lists, assemblies, and installations

• Prepare complete production detail drawings

• Contribute design modifications to improve quality of product or facilitate manufacturing operations

• Checking of electrical and mechanical drawings



Requirements:

• Associate's Degree or equivalent experience

• A minimum of 7 years recent relevant experience

• Experience with AutoCAD and/or SolidWorks

• Possess skills to prioritize assignments and flexibility to adjust to highest priorities depending on the program needs

• Must be familiar with Mil Std 100 / 1000 and MIL 31000T, ANSI Y14 drawings standards and aerospace documentation practices



Strongly preferred skills:

• Experience in Model Based Design

• Working with additive manufacturing techniques

• Experience with documentation of designs for additive manufacturing

• Checking experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-33462
Job Location: Arlington, TX
Rate: 37.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-28 00:00:00.0
Start Date: 2019-08-26 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Test Set Developers and FPGA Developers

Description:
Summary: •Seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment.
•The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
•Will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries.
•Must be able to work with without appreciable direction.

Basic Qualifications: •9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
•Demonstrated proficiency using digital test equipment.
•Demonstrated proficiency developing digital electronics.
Preferred Qualifications: •Experience designing high speed FPGAs.
•Experience developing digital test systems.
•Experience testing and validation of digital space electronics.
 
Job Number: 1910097060
Job Location: Manhattan Beach, CA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Education / Experience:

- A bachelor’s degree in electrical engineering or electronics engineering from an accredited institution
- This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee


Position Criteria:
- Experience in analog and circuit design (digital is a plus), which includes ADC and DAC circuits design, DC – DC converter power supply design, constant current source design, FPGAs.
- Experience with LED drive circuitry, Pulse Width Modulation (PWM) dimming, signal conditioning
- Hands on experience in bench top prototype circuit verification, PCB layout verification, familiar with electrical and electronics test equipment.
- Experience with Cadence/Allegro OrCAD Schematic Capture, PCB Designer, LTSpice is a must
- Proficient in trouble shooting of circuit and system failures, EMI test failures, etc.
- Knowledge of PDM system (Enovia) for documentation control and workflow is desired
- Experience with stress analysis and component parts derating.
- EMI expert
- DO-160G experienced
- Test procedure redaction
- PCB design for build to spec
- FPGA electronic experienced
- D0-254 certification experienced
- Test witness able to troubleshoot on-site
- Validation & Verification of electro-mechanical system

Preferred Qualification
- Experience with DO-160
- Experience with DO-254
- Experience with DFMA, DFSS and DOE.
 
Job Location: Grand Prairie, TX
Rate: 73/hr
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 9541725 and 9554238

Description:
Electrical Engineer II ( Chandler, AZ ) 9541725 and 9554238
11 Month Contract

Pay Rate: $45-53 /hr, depending on experience

Experience/expertise in testing of electrical assemblies, including writing test procedures, operating test equipment/racks is necessary.
Experience with radiation performance testing is preferred. Software coding skills are desired.
Candidate must be available to travel to test facilities for test execution.

Required Qualifications:
• Candidate shall possess a Bachelor of Science Degree in Electrical Engineering, plus a minimum of two (2) years of experience in a related field.
• A DOD Secret security clearance is preferred but not mandatory.
• Electrical engineering candidate with an understanding of electrical and electronic system design, integration and test.
• Some hands on test experience with electrical systems or components is required.
• Skills to write test procedure and review test data to ensure that hardware is tested properly and passed all required tests.
• Good interpersonal skills as well as ability to communicate with engineers and other departments are important.
• The ability to perform engineering analyses or reports using tools such as PSpice or Matlab.
• Documentation skills and experience on common PC desktop applications are also required.
 
Job Number: 9541725 and 9554238
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Engineer III

Description:
We have an outstanding Contract position for an Electrical Power Engineer to join a leading Company located in Anaheim, CA.
The Electrical Power Engineer shall provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment, and systems under moderate supervision. The Electrical Power Engineer shall participate in all stages of development from design through manufacturing support and system integration.

Major Responsibilities:
• High Voltage (1000VDC and or 450VAC, 3 phase)
• Bachelor Degree in Electrical Engineering
• Three years (recent and uninterrupted) experience in design and integration of power conversion equipment)
• Pay rate is $40.00 -$65.00 hour Maximus
• Available to interview and start immediately

Desired Qualifications:
Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
Circuit analysis applications, PSPICE preferred.
Magnetics design and closed control loop design experience, a plus.
 
Job Number: 37491
Job Location: Anaheim, CA
Rate: $65.00
Duration: 12 Month+
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
• Technology focal for motor / motor controllers
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Preparation and presentation of technical data in design reviews
• Review and approval of Qualification Test Plans, Procedures and Reports

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical / Electronic Engineering, Master’s degree preferred
• 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

Knowledge, Skills and Abilities:
• Knowledge of aircraft electrical power systems
• Knowledge of system modeling and analysis tools
• Knowledge of motor / motor controller theory and application
• Knowledge of FAR Part 23 or 25 regulations preferred
• Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
 
Job Number: 28-005
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Role Summary/Purpose
The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

Essential Responsibilities
In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

In addition, as a Systems Engineer, you will:

• Design Power Systems Architectures in co-operation with aircraft manufacturers
• Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements
• Derive system interfaces
• Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements
• Perform system analysis, safety analysis, modeling, and simulation
• Develop the systems test environment
• Development system test plans and procedures and get their approval with the customer
• Work on developing and releasing test reports to customers
• Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program
• Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals
• Maintain scope baseline
• Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations
• Document the results of analyses and studies in technical reports
• Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
• Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures
• Support technical and program reviews

Qualifications/Requirements

• Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering
• Experience in requirements development, verification and validation
• Experience in system engineering and project management/planning
• Knowledge of aircraft power distribution and generation
• Clear thinking and diligent approach
• Strong interpersonal and communication skills

Desired Characteristics

• Knowledge of electrical power systems technical requirements, certification requirements
• Experience/ knowledge of the development lifecycle phases
• Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs
• Good written and verbal communication skills.
• Proven ability to contribute in a team environment
• Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard
• System mindset and problem solver
 
Job Number: 35475
Job Location: Dayton, OH
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 11/25/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Testers (Digital, Analog and RF Assemblies)(Interim Clearance)

Description:
Candidates must be able to test and troubleshoot digital, analog and RF assemblies down to the component level.

They must:
• be proficient with the use of various test equipment like multimeters, oscilloscopes, spectrum analyzers and must be familiar with the use of schematic diagrams.
• have proven problem-solving skills.

Candidates should:
• have experience testing and troubleshooting either micro-circuit, circuit card & high-voltage power supply assemblies down to the component level.
• be capable of using a computer and operating menu driven software.
• be capable of documenting test data as defined by verbal or written instruction.
• have the ability to work independently and as part of a team, under guidance of engineers, as necessary.

Candidate must have at a minimum an Interim Security Clearance to start with the ability to obtain a Secret Clearance.

Education Requirements:
• High School Diploma or GED plus completion of a comprehensive course in Electronic Technology.
• Must have 2-5 yrs experience performing digital, analog and RF testing using automated and manual test equipment.
 
Job Number: 1910103265
Job Location: Clifton, NJ
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer

Description:
Contract-to-hire opportunity located in E. Aurora NY.

Electronics Packaging Engineer
Essential job functions: This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Required Education: BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 6198
Job Location: East Aurora, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/25/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Hardware Development Engineer (JPSS program)

Description:
The candidate will: •Perform Hardware/Electrical Engineering design, analysis and testing of electronics and RF subsystems.
•Represent Hardware Engineering in development and evaluation of system architectures, designs, and interfaces that meet system specifications.
•Prepare and present hardware specifications and design analysis in program reviews.
•Participate in Trade Studies and Vendor/Product selection.
•Participate in engineering discipline process development and deployment on programs.
•Insure organizational processes are followed and create program specific work instructions when necessary.
•Support may also include working with other organizations, coordinating common and efficient cross-factory environments (both hardware and software), tools, process, and methods.

Key responsibilities for the qualified candidate include: •Responsible for assisting in trouble shooting the Space to Ground Interface, including RF equipment and antennas
•Responsible for working with team members to resolve operational issues in an urgent manner
•Responsible to create design documentation, perform reviews with team members and vendors, and follow program and corporate process
•Responsible to work with the team to create System Operating Procedures

Required Skills:
•BS degree in Electrical Engineering specializing in RF and Communications fields
•Experience with RF/Baseband and signal processing design, development, and hardware testing
•Experience with preparing statements that convey the fundamental characteristics of the design objective, creating and presenting reports
•Experience with writing and reviewing manuals, procedures, plans, specifications, engineering drawings and notebooks
•General knowledge of communication protocols, digital signal processing, RF signal types and levels
•General knowledge of common information system (computer) hardware interfaces
•Must be proficient with Microsoft Office applications such as Word, Excel, and Power Point
•Must be familiar with Satellite Ground Station facilities and operations
•Periodic travel required to support upgrades at Ground Stations in CONUS and OCONUS
•U.S. Citizenship status is required. No clearance needed but needs to have ability to obtain a Common Access Card (CAC) to access government systems.

Desired Skills
•Experience with VHDL, FPGA design and coding, firmware and embedded software
•Experience with analyzing system parameters to ensure requirements are met using analytical tools
•Experience with MATLAB
•Experience with performing trade studies, recommending solutions and identifying potential vendors
•Experience with developing bill of material required to produce product and initiate the purchasing process and monitor progress
•Experience with collecting and reporting time and material estimates based on requirements.

Required Education
•Requires a degree in Science Technology Engineering or Math (STEM) with emphasis in RF design and a minimum of 4+ years of experience or 12 years experience in lieu of a degree
 
Job Number: 1910106380
Job Location: Aurora, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Hardware Engineer

Location: Driftwood, TX

12+ month contract



The primary responsibility of this engineer is the design and development of high-performance RF and microwave products. As a HW Engineer, you will be an integral part of a project team responsible for designing and developing a product from concept to release.

In addition to solid hardware engineering practices, you will be expected to be familiar with a wide variety of sophisticated test equipment, define and execute comprehensive test plans to debug and validate the performance of complicated circuits and modules, as well as develop and implement sophisticated calibration algorithms.

You will also be directly involved in setting specifications and transitioning the product from engineering to production. In this role, you will have the opportunity to develop and to implement automated test platforms, integrating both hardware and software, which are consistent with a high-mix, low-volume, high-tech, and high-quality operation.

Job Responsibilities

Specify, design, and implement complex hardware modules and sub-systems

Design and implement automated test solutions for microwave and RF Products.

Identify and resolve technical problems that often occur during development of new products.

Define and implement project plans, manage milestones, and hold required reviews to assure test system readiness for product release.

Integrate hardware and software to fully support new RF products under development.

Utilize programming skills to develop automated test using LabVIEW

Design measurement algorithms for RF products.

Review and approve product specifications and customer user documentation for the product.

Requirements

B. S. or M.S. in electrical engineering, electronics engineering.

Good understanding of computers and LabVIEW

Passion for learning about and working with test and measurement industry technologies

Strong work ethic and drive to succeed

Preferred skills:

Strong understanding of RF systems, RF measurements, electronics, computers, and high-level programming languages (LabVIEW, TestStand, C/C++, Python)

Familiarity with S-parameter measurements, power accuracy, and digital modulation standards

Knowledgeable about gain, compression, and intermodulation measurements

Sources of measurement errors

Appropriate selection of RF and microwave instrumentation

Statistical analysis of data

Experience with using RF/Microwave Test Instrumentation like Oscilloscope, DMM, Signal Generators, Spectrum Analyzers, Network Analyzers and Power Meters.

Demonstrate ability to:

Work effectively in a group development environment

Effectively diagnose technical issues and propose reasonable solutions

Problem-solve effectively - diagnose technical issues and propose reasonable solutions

Take ownership of goals, project schedules, and milestones

Listen attentively and grasp fast-paced technical conversation

Quickly learn applicable technology, systems and commercial off the shelf components

Adequate knowledge of reading schematics and data sheets for components

Strong documentation and writing skills





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57826
Job Location: Driftwood, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial / Manufacturing Engineer (Elevator Industry)

Description:
The candidate will:
• Manage high complexity design and planning of layout for assembly and materials handling
• Adapt machines or equipment design to factory and production conditions.
• Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance

They will be responsible for designing and improving existing material flow process within manufacturing to meet the ever-increasing performance demands.

The primary responsibilities of the position are as follows:
• Lead Work Cell design initiatives to support customer demand by implementing lean material flow throughout value stream
• Support automation initiatives by developing smart robotic fixtures and conveyors while maintaining safe work environments to reduce ergonomic risks and increase efficiency
• Support and develop smart manufacturing applications to ensure quality and repeatability within various manufacturing processes
• Support Continuous improvement and expand the use of ACE tools.
• In depth knowledge of sheet metal fabrication, electronic wiring, and testing processes
 
Job Number: 1910107197
Job Location: Florence, SC
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job ID 38360/4063

Description:
We have an Excellent Contract position for a Mechanical Design Engineer to join a leading Company located in San Jose, CA. When applying please enter Job ID 38360/4063


Contract 12 Month or possibly longer
Pay Rate $44.65 to $49.76
Work Schedule- 9/80
Travel 10%-
Over Time- Required

Job Responsibilities:
• In this role, you will lead the integration of vehicle powertrain components onto the vehicle platform.
• Typical components could include gearboxes, generators, and various control units.
• You should be familiar with methods to isolate sensitive electronics from vibration as used in military tracked vehicles.
• You will have the responsibility to update and release design changes using PTC CREO and completing all related design change processes.
• Develop designs to meet provided requirements.
• Incorporation of design revisions.
• Analyze and interpret design specifications, drawings, documentation, models, and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
• Participate in design and process reviews Interface with senior members of the integrated product team to status issues.
Job Qualifications:
• Bachelor of Science degree in Mechanical Engineering.
• 2+ years of packaging components into a defined space claim.
• PTC Creo, or similar CAD software, experience.
• Understanding of and ability to apply GD&T to drawings.
• Experience analyzing bolted joints.
• Experience performing tolerance analyses.
 
Job Number: 38360
Job Location: San Jose, CA
Rate: $44.65 to $49.76
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Lexington, KY
Rate: $27.00/HR
Duration: 6 month contract

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements.
- Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives.
- Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions.
- Builds relationships with strategic customers through logistics initiatives.
- Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
- Ability to meet deadlines
- Ability to Work Independently
- Ability to Work with Others
- Create Spreadsheets
- MS Excel
 
Job Number: 11454
Job Location: Lexington, KY
Rate: $27.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Lexington, KY
Rate: $27.00/HR
Duration: 6 month contract

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements.
- Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives.
- Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions.
- Builds relationships with strategic customers through logistics initiatives.
- Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
- Ability to meet deadlines
- Ability to Work Independently
- Ability to Work with Others
- Create Spreadsheets
- MS Excel
 
Job Number: 11245
Job Location: Lexington, KY
Rate: $27.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager

Description:
Excellent job opportunity for a Material Program Manager in Redmond, WA. I am Looking for a candidate with a strong background in aerospace procurement/supply chain, project management, earned value analysis with strong people skills. Commodity focus is in machined parts and electronics. Able to travel nationally at a moment’s notice with the ability to create and present status reports to company leadership.
 
Job Number: 37362
Job Location: Redmond, WA
Rate: $40 to $58.00 DOE
Duration: 6 Month +
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (7-10+ yrs exp)

Description:
Primary duties may include:
• Perform Mechanical Analyses. Analyze mechanical components and subsystems using both common application programs and more advanced programs such as NASTRAN, Thermal Desktop and PATRAN or FEMAP. Performs kinematic, dynamic, heat transfer and/or vibration analyses on one or more complex materials, structural components or functional systems. Perform trade studies and document results for presentation to senior program staff. Types of hardware analyzed will include aerospace structures, optomechanical assemblies and other electronics boxes and structures.
• Provide Design Input. Provide design guidance for optomechanical and other structures based on experience as well as analysis results. Inputs should take into account program technical requirements as well as program cost, schedule and technical risk appetite.
• Guide Test of Hardware. Provide input to optomechanical hardware test plans with particular focus on achieving correlation between test and analysis.
• Maintain and Continuously Improve Group Optomechanical Analysis Knowledge Base. Plan and execute process for maintaining best practices and lessons learned for optomechanical specific analysis information. Coordinate and direct the work efforts of lower level engineers and support personnel, if assigned. Maintain up-to-date knowledge of developments in the analysis discipline. Suggest and plan initiatives to grow capability and knowledge when needed.
• Document the Product Development. Generate, review and approve written reports supporting the design, analyses, and test of the product design including drawings, engineering specifications, and other associated documentation. Report on project status and progress measured against specific plans. Prepare design review packages and present data to both internal and external customers.
• Implement Continuous Improvement. Implement the Mechanical Design Process in work plans and adhere to our Quality System. Provide feedback to improve the process, and work to meet engineering objectives. Maintain up-to-date knowledge of developments in the mechanical engineering disciplines. Ensure cost effectiveness and manufacturability of design.
• Perform Other Duties. Coordinate and direct the work efforts of lower level engineers and support personnel, if assigned. Assignments may include development of new techniques as a result of independent study, materials development and support of proposal efforts. Perform other duties and responsibilities as required.

Education
Bachelor's Degree in a related field, MS a plus. Typical 7 years work experience or equivalent experience

Typical Related Experience
• Developing mechanical requirements, designs, verification and validation of products, and product integration required. Experience using state-of-the-art technology, principles, tools and concepts required. Experience with mechanical development lifecycle and development processes and procedures required.
• Working knowledge of commercial and military specifications and standards related to mechanical design and documentation required.
• Ability to read and understand engineering drawings, run-lists, and schematics required.
• Knowledge of tools such as CAD and FEA (thermal and structural background and experience) required.
• Entry level leadership experience required.

In addition to the items listed above, the essential functions include:
• Exercise discretion and independent judgment in the performance of duties set forth above.
• Communicate effectively both orally and in writing;
• Exhibit sound interpersonal skills involving interfacing, coordinating and negotiating with company personnel, customers and suppliers;
• Utilize computer skills to prepare appropriate reports and documents;
• Make decisions using sound judgment while complying with policies, procedures, appropriate principles and applicable state and federal laws and regulations;
• Analyze, evaluate, develop and implement processes and systems within budget and adhere to time requirements and schedule;
• Design and develop products and services using state of-the-art technology, principles, theories and concepts.

Preferred Skills and Education
• NASTRAN experience (static stress resulting from loading due to inertial effects, shock, applied pressure, and thermal expansion mismatch, modal, forced response, bolted joint, heat transfer, fatigue)
• Thermal Desktop Experience as well as fluid flow, pressure drop and matching fans/pumps with flow resistances.
• Experience with hand calculations (including Excel and Mathcad or equivalent) to bound problems and provide preliminary estimates
• Experience correlating analysis to test for optomechanical hardware/systems
• Experience with complex materials (such as composites, engineering plastics)
• Experience in the Defense Electronics/Optical/Aerospace industry
• PTC Creo experience, PDMLink
• US Citizen Required
 
Job Number: 1910107080
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (7-10+ yrs exp)

Description:
This position will contribute to the design of precision optical systems and tooling.
Responsibilities include opto-mechanical and electro-mechanical design of aerospace flight components. Responsibilities include providing solutions to a variety of complex technical problems as assigned.

Role and Responsibilities:
Lead and direct opto-mechanical engineering on multiple projects through all phases of innovation and development
• Assume primary responsibility for the design, analysis, and documentation of opto-mechanical systems; these systems are typically deployed in an industrial or aerospace environment and may have significant electronic content
• Direct the activities of other Engineers and provide technical direction to other stakeholders including Manufacturing, Purchasing, Quality as necessary
• Provide technical content for proposals, estimate and track mechanical design costs, create schedule estimates, and make presentations to customers and company management.
• Create system models, perform required analysis, and create detailed part and assembly drawings and associated parts lists, in accordance with ANSI Y14.5 and inhouse drawing standards.

Basic Qualifications:
• US Citizenship is required.
• This position requires a Bachelor’s degree in the appropriate discipline and 7 years of relevant experience or an advanced degree in the appropriate discipline and 5 years of experience. In the absence of a degree 11 years of appropriate experience is required

Required Skills:
• Have a thorough understanding of Mechanical Engineering principles, theories, and applications
• Demonstrates a solid understanding of optics and opto-mechanical best practices and basic understanding of the other engineering disciplines
• Ability to use hand calculations for preliminary sizing and for FEA validation
• Able to analyze, problem solve, multi-task and meet deadlines
• Able to clearly describe results in oral presentations and written reports
• Results-oriented with strong personal drive and personal ownership in meeting commitments
• Excellent organizational skills and attention to detail.
• Operate independently with limited supervision
• Impeccable ethics; maintains a positive and professional working environment
• Strong CAD solid modeling experience with ANSI Y14.5 knowledge
• Proficient in CREO (Pro-E) and PDMLink or similar CAD tool

Preferred Skills:
• Advanced technical degree
• Finite Element Analysis using NASTRAN
 
Job Number: 1910107083
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.
Operations Specialist
(U.S. Citizenship Required*)
Tallahassee, FL
2019-9798
Responsibilities:
• Responsible for harness, electrical, and mechanical assembly including but not limited to: routing wires, plugging wires, crimping contacts, make electrical connections with solder, assembling hardware, tightening hardware, complete testing of electronic units.
• Work safely following OSHA and ISO guidelines.

Qualifications:
• Must be able to work 2nd shift as needed.
• Willing to work multiple shifts and holidays.
• Must be able to work overtime during the week or weekend as needed and as defined by supervisor.
• Must be able to interface with computerized work instructions as well as read and follow drawings.
• Must be able to inspect and verify work performed is in accordance with requirements.
• Able to become IPC certified in Soldering.
• Capable of lifting 20+ lbs. without assistance.
• Be able to use simple hand tools, power tools, fixtures and direct reading test devices.
• Must be able to wear Personal Protective Equipment as required.
• Must be able to communicate effectively with Supervisor.
• Must be able to follow instructions.
• Strong PC skills using MS Word, Excel, and applicable software
• Excellent verbal and written communication skills
• Strong initiative & self-starter, requires minimal supervision
• Demonstrate ability to lead and work proficiently within a team environment
• Must be willing to work overtime during the week and including weekends.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or GEQ equivalent.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Join a team that values your experience!
 
Job Number: 2019-9798
Job Location: Tallahassee, FL
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Technical Editor and Writer - Clearance CA

Description:
Principal Technical Editor and Writer (Job Number: 19028955)
Number of Openings: 1
Location(s): United States-California-San Diego

Shift: 1st Shift

Target Start Date: Nov 4, 2019
Target End Date: Jul 3, 2020
Pay rate: $40.00 - $45.00
Number of openings: 1
Location: Rancho Bernardo
Work schedule: 9/80

The selected candidate will develop and implement software integration plans in a lab environment supporting various space, aircraft, and ground systems.


Essential Functions:

•Write, rewrite, and/or edit documents such as operational procedure manuals and related technical publications
•Communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel
•Act as a resourceful point of contact to Engineering and the Test teams
•Support the development of teams in the investigation of issues
•Develop, implement, and support the Technical Order (TO) development and build plans
•Demonstrate initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals
•Requires active participation in overseeing the preparation of illustrative materials, including the selection of drawings, sketches, diagrams and charts

Candidate must be comfortable in a lab environment and be able to collaborate closely with system engineers, hardware designers, and integration/test engineers.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization.

Preferred Qualifications:

Previous Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: JK-1807ATO
Job Location: San Diego, CA
Rate: 40-45/hr
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

RF Microwave and Hardware Subsystem Design Engineer

Description:
PDS Tech inc is seeking a Microwave and Hardware Design Engineer in Baltimore, MD

The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program.  Responsibilities may include development of antenna architectures, receiver / exciter architectures, requirements generation/flow down; subsystem analysis including hardware from RF to digits, performance modeling, support for performance testing, requirements verification, and more.

Experienced applicants will have at least a Bachelor’s Degree in Science or other related technical degree and have experience designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:

- Active electronically scanned arrays (AESAs)

- Highly integrated subsystems including antenna hardware

- Reflectors, Reflect Arrays, Digital Beam Forming

- Antenna/RF Performance Analysis

- Computational Electromagnetics, Statistics

- Antenna or Subsystem Control Design

- Antenna Measurements and Data Reduction

- Antenna range integration, test, and system integration

- Subsystem requirements (hardware and software) derivation, flow-down, and configuration

The Engineering RF Microwave Design positions require the candidates to have the ability to obtain and maintain at least a Secret Clearance per business requirements. An active Secret or higher clearance is a plus!

This is a Dual level opening, candidate will be considered at both a level 3 or 4 based upon the Basic Qualifications listed below.

Qualifications:
Basic Qualification for a Band 3:

Must have a Bachelor's Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description or 3 years of experience with a Master's Degree and/or 0 years of experience with a Ph. D.

Ability to Obtain and Maintain and Active Secret Clearance.

 
 
Job Number: 1910104510
Job Location: Baltimore, MD
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 11/25/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTuwQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: RAM_MO
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Design Engineer

Description:
Location: Driftwood, TX (20 miles southwest of Austin, TX)



Job Summary

Seeking an experienced, self-motivated Senior Electrical Design Engineer (Sr. EE) to provide both direct contribution and technical leadership to develop Automated Test Equipment (ATE) Systems.
The Sr. EE is responsible for all aspects of requirements analysis, design, integration, and deployment of complex automated electronic test systems.
Must have demonstrated expertise in one or more of the following areas: ATE system design, RF/microwave system design, analog circuit design, digital circuit design.
Must thrive in a fast-paced, customer-focused, cross-functional team.
Works closely with program manager to direct and oversee the technical work of other electrical, mechanical, and software engineers.
Strong written and verbal communication skills required. Must quickly and thoroughly learn new skills, technologies, and industry standards.
The Sr. EE must be a driven problem-solver who motivates others by word and example to achieve the team’s goals.
Job Responsibilities

Specify, design, and implement automated electronic test solutions for customer products.
Specify, design, and implement complex electronic hardware modules and sub-systems.
Design measurement algorithms.
Serve as technical leader of cross-functional team.
Prepare and lead all technical aspects of formal and informal design reviews.
Identify and resolve technical problems that often occur during development of new systems.
Define and adhere to program schedules and budgets.
Integrate hardware and software to fully support ATE systems.
Insure all customer technical requirements are fully met.
Qualifications

BSEE or MSEE
10+ years experience performing responsibilities described above
Must be a U.S. Citizen due to ITAR and specific contract flowdow
Preferred skills:

Strong understanding of RF systems, measurement, and design:
S-parameter measurements, power accuracy, and digital modulation standards
Knowledgeable about gain, compression, and intermodulation measurements
Appropriate selection of RF and microwave instrumentation
Experience with using RF/Microwave Test Instrumentation: VNA, Power Meter, Spectrum Analyzer, RF Switching
Strong understanding of mixed signal test and measurement:
Experience with test instruments such as Oscilloscope, DMM, Function Generator, Programmable Power Supplies
Experience with signal switching such as multiplexers and matrices
Experience with industry standard products such as PXIe, LXI, VXI, GPIB.
Experience with communication buses: Ethernet, 1553, ARINC429, SPI, I2C
Strong understanding of digital test and measurement:
FPGA and embedded design
JTAG/boundary scan
Experience with test instruments such as logic analyzer, pattern generator, and oscilloscope.
Ability to diagnose and correct ATE system defects.
Experience with software development using LabVIEW, TestStand, C/C++, Python.
Design and layout of printed circuit boards


Please send resumes to Becky Norman at bnorman@butler.com.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression
 
Job Number: 57828
Job Location: Austin, TX
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (5-7+ yrs exp)

Description:
Job Responsibilities:
• Design and development electronic circuit boards and systems
• Generate and review specifications
• Develop and release complete packages for manufacturing, including schematics, bills of materials, PCB fab documentation, etc.
• Test, debug, verify and integrate electronics assemblies and sub-systems
• Assist manufacturing with the resolution of production problems, as needed

Education:
• BS degree in Electrical Engineering or related discipline
• MS Electrical Engineering preferred

Experience/Qualifications:
• 5+ years’ experience required
• Candidate must be a US Citizen with the ability to obtain a US Government Security Clearance

Required Skills
• Experience with Mentor PCB development tools, including Xpedition, PADS, HyperLynx
• Excellent understanding of product development methodology and associated documentation

Preferred Skills
• Experience working in an AS9100 environment
• Background developing military/aerospace products and related environmental specifications and requirements, including EMC, temperature, altitude, power, etc.
• Knowledge of requirements and components needed to develop interconnecting cables is a plus
• Knowledge of Microsoft Office Suite
• Strong verbal and written technical communications skills
• Must be a self-starter
• 10% or less travel may be required
 
Job Number: 1910107094
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered. The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.
Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Microcontrollers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools


Additional Job Details:
* Labview Test Stand experience * Programming in Labview * Working in Lab to Test Hardware * Low level peripheral driver development for the TMS570 and LS1021A * Develop an application for the LS1021A * Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables


Travel Requirements Travel to Rockford and/or Jamestown will be required
 
Job Number: 51383
Job Location: Phoenix, Az
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Jamestown ND
Rate: $68.00/hr
Duration: 6 months
Work Shift: First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Primary Responsibilities
o Develops, coordinates and conducts complex tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Liaises closely with other project team members in the planning, design, development, and utilization of electronic data processing systems for product and commercials software to ensure smooth operations on software engineering activities.
o Recommends changes in the selection and application of software production components to improve and develop software engineering activities.
o Designs and implements build procedures that are used to support hardware and software product development and function.
o Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
o Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
o Ensures hardware and software standards are met.
o Designs and implements build procedures that are used to support hardware and software product development and use.
o May develop software configuration standards for company-wide use.
o May train software developers in the use of configuration management tools and the implementation of software quality standards

Basic Qualifications
o Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and 7 years of prior relevant experience or an Advanced degree and 5 years of prior or relevant experience
o Embedded systems software development experience utilizing C or C++ (4+ years)
o Motivated self-starter with strong analytical skills
o Experience with real-time embedded applications
o Experience in developing products for civil or military applications meeting industry or government security or safety standards
o Strong written and verbal communications skills and the ability to work well with others in a professional team environment
o Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules Preferred Qualifications
o TCP/IP network applications development experience (4+ years)
o UML experience (2+ years)
o Familiarity with ARINC 664 protocol (2+years)
o Experience following a well-defined software development process, e.g. DO-178 (4+ years) Education & Certifications
o Bachelor’s Degree in engineering or Technical discipline and 7 years of relevant experience OR
o Advanced Degree in engineering or Technical discipline and 5 years of relevant experience OR
o In the absence of a degree, 11 years of relevant experience is required

Candidate meeting requirements of an advance position would be considered depending on aerospace experience.
 
Job Number: 11304
Job Location: Jamestown, ND
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Navigation and Controls Engineer (7 - 10+ yrs exp)

Description:
The Core Technology Engineering Group is looking for a Staff Engineer with a background/interest in Navigation and Controls to help in the design, analysis and testing of state of the art airborne remote sensing systems.

These sensor systems utilize highly accurate Navigation & Control systems in order to isolate the line-of-sight (LOS) from aircraft motions, plus for pointing to imaging targets as well as obtaining geolocation information. The individual will join an experienced interdisciplinary team of engineers working in a collaborative environment, with the responsibility of developing & implementing guidance and control systems.

The main responsibilities include:
• Derive the Navigation & Control system requirements and functionally architect a system to meet the requirement under size & power constraints.
• Design and/or implement Navigation & Control algorithms to perform under 6DOF aircraft motion.
• Perform model-based analysis of the various aspects of the system including stability, performance, robustness and mission objective analysis.

Education/Certifications:
• Master's degree in Aerospace, Controls, Electrical or Mechanical Engineering, Physics, or Mathematics with 5+ years Control or Navigation Systems experience
• PhD in Control or Navigation Engineering with 3+ years Control or Navigation Systems experience is highly preferred

Experience/Qualifications:
Basic Requirements:
• US Citizenship
• Minimum of a Bachelor's degree in appropriate disciple and 7 years’ experience or an advanced degree in the appropriate disciple and 5 years’ experience

Required Experience & Qualification
• Navigation solution design and implementation for ISR sensing systems
• Airborne GPS/Antenna Electronics integration
• Inertial instrument expertise

Preferred Experience & Qualification
• Modernized GPS products experience
• Modeling and estimation/Kalman filtering experience
• Sensor fusion and PNT experience
 
Job Number: 1910107091
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Location: Phoenix AZ
Rate: $68.00/hr.
Shift: 1st
Duration: 6 Months
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Micro-controllers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools

Additional Job Details:
* Labview Test Stand experience
* Programming in Labview
* Working in Lab to Test Hardware
* Low level peripheral driver development for the TMS570 and LS1021A
* Develop an application for the LS1021A
* Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables
* Travel will be required to Rockford and/or Jamestown
 
Job Number: 11636
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst Principal Engineer - no clearance CA

Description:
166453/9359
Stress Analyst Principal Engineer
Irvine, CA
60-80/hr DOE


Ability to conduct stress analysis by hand and FEA. Experience with ANSYS Mechanical for FEA. Experience with a variety of analysis types, including: proof/burst, shock/acceleration, modal, harmonic, random vibration.

Overall 10-15 years of experience doing stress analysis in Aerospace. Familiarity with analysis of pneumatic engine components a plus. Strong verbal and written communication skills required.

Provides technical expertise and leadership in an engineering discipline, product, or systems field. Researches and carries out complex engineering assignments that result in the introduction of new technologies, products, or processes. Contributes to and has responsibility for the completion of significant assignments with broad product, technology, customer, and strategic business impact. Develops and recommends solutions to unique technical challenges.

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline; Masters degree (MS) preferred.

· Demonstrated ability to perform the essential functions of the job typically acquired through 10-12 years of related experience.
· Comprehensive, advanced knowledge of product or domain engineering theories (e.g. mechanical, electronic, packaging, etc.), principles, industry practices, concepts, techniques, government regulations, and policies.
· Demonstrated ability to research, develop, and integrate new technologies.
· Ability to communicate and influence varied audiences to gain support or resolve issues. Makes effective presentations on complex topics to top management, customers, and/or other key stakeholders.
· Ability to apply and integrate knowledge of other related engineering areas or experts to own area of expertise.
· Proficient with software and specialized data analysis, and engineering design tools.
· Ability to establish and track performance to goals and objectives to complete complex or major projects and provide direction to the team at project milestones.
· Ability to respond to significant inquiries from customers, regulatory agencies, or other internal teams.
 
Job Number: JK-9359
Job Location: Irvine, CA
Rate: 60-80/hr DOE
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator CA

Description:
Supply Chain Ops Coordinator (Job Number: 19028585)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 2nd Shift

Target Start Date: Oct 5, 2019

Target End Date: Oct 5, 2020

Pay rate: $20.00 - $23.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo
Work schedule: 5/40 - Second shift


•Maintain schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.


•Compile records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.


•Expedite flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.


•Assist in determining possible and actual shortages may initiate action to correct these deficiencies.


•Use knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.


•Estimate and log production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Deliver stock or inventory to the manufacturing floor and/or supplies to business areas


Basic Qualifications:



•High School Diploma and
2 years additional education and/or related experience.

•Microsoft Office knowledge.


•Strong Excel background.


•Knowledge of SAP/R3 or similar ERP software.


•General understanding of continuous process improvement.


•Must be able to obtain a Secret Clearance.


•Ability to frequently move and position objects weighing up to 40 lbs.


•Must be able to move stock/inventory/materials around the manufacturing floor and various business units.



Preferred Qualifications:




•Bachelors with 3 years related experience.


•Knowledge of manufacturing work flow and MRP systems or similar.


•Ability to work in a fast paced environment.


•Experience in electronics manufacturing is a plus.
 
Job Number: JK-1806ATO
Job Location: El Segundo, CA
Rate: 20-23/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Systems Engineer
(U.S. Citizenship Required*)
Fort Worth, TX
2019-9801
Responsibilities:
• Perform technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
• Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
• Ensure the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Perform functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualification:
• An Active Secret Security Clearance is required at time of hire as well as the ability to gain access to restricted facilities.
• This position supports a 9/80 A work schedule.
• Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
• Experience with requirements development, decomposition, or verification.
• Working knowledge of Radio Frequency (RF) principles and techniques.
• Experience with supply chain management and supplier technical coordination.
• Project leadership experience.
• Experience with RF system Design & Development.
• Experience with RF subsystem Integration & Test.
• Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
• Experience with defining system architecture.
• Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
• Experience with Cost Account Management (CAM).
• Strong communication skills.
• Proficiency with Word, Excel and PowerPoint; experience with MS Project.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 4+ years of experience, or a Master's Degree with 2+ years of experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9801
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: .
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
2. Experience with requirements development, decomposition, or verification.

Desired Skills:
1. Working knowledge of Radio Frequency (RF) principles and techniques.
2. Experience with supply chain management and supplier technical coordination.
3. Project leadership experience.
4. Experience with RF system Design & Development.
5. Experience with RF subsystem Integration & Test.
6. Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
7. Experience with defining system architecture.
8. Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
9. Experience with Cost Account Management (CAM).
10. Strong communication skills.
11. Proficiency with Word, Excel and PowerPoint; experience with MS Project.
12. Master's Degree.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11620
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Obtain/maintain at least a Secret security clearance required; current clearance preferred
Military radios and intercoms

Radio frequency (RF) and computer/communications networking analysis/design

Mission Command software

GPS and navigation devices

Electronic warfare systems / components

Intelligence (SIGINT, ELINT, COMINT, etc.)
 
Job Number: 47518
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several Systems Engineers to support the electric power systems power conversion and distribution product group. The candidate will define, maintain, document, and test system requirements for the secondary power distribution products.



Responsibilities will include but not be limited to:

Working in a team environment, engaging in full life-cycle development of electric power distribution and conversion systems.

Certifying to aerospace standards such as ARP4754

Develop distribution system architecture that meets or exceeds the product development requirements

Confirm product design performance, capability and reliability in the engineering product test laboratories

Work with internal systems and software teams to analyze and conduct engineering investigations on electronic products

Interact with both internal and external teams to seamlessly integrate distribution product designs into chapter 24 aircraft electrical systems

Coordinate with manufacturing faculties to effectively implement design into production

Collaborate with the product marketing teams locally to develop product requirements and ensure that the product meets their needs when launched

Required Software: MS Office



Required Experience:

10-15 years experience in systems engineering in the aerospace and defense industry
10-15 years experience with aircraft certification requirements related to system safety and reliability (ARP4754, ARP4761 , FAR / JAR) , and aircraft electrical system architecture
Experience with DOORs software
Experience with RTCA, FAA, ARINC, MIL, and ISO specifications
Experience with Electrical sub-systems development (e.g. Chapter 24, aircraft utilities, power distribution units, actuation systems)
Experience with High Voltage Direct Current (HVDC) Systems a plus
Experience with creating estimates and proposals
Required Education:

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 247521
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / RF systems integration test radar EW Communications Radio Frequency - Clearance TX

Description:
166448 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2081-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Master's Degree.
Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
Experience with requirements development, decomposition, or verification.
Working knowledge of Radio Frequency (RF) principles and techniques.
Experience with supply chain management and supplier technical coordination.
Project leadership experience.
Experience with RF system Design & Development.
Experience with RF subsystem Integration & Test.
Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
Experience with defining system architecture.
Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
Experience with Cost Account Management (CAM).
Strong communication skills.
Proficiency with Word, Excel and PowerPoint; experience with MS Project.

Qty 1 position
 
Job Number: JE-2081-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Must be Eligible for a Secret Clearance

The position requires candidate to perform testing on electronic systems including modules, chassis, and box level assembly.

Preferred:
RF testing experience.
 
Job Number: 47492
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer 4

Description:
Wire Design & Install Engineer 4

Location: Kennedy Space Center, FL
Duration:12 months

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years’ related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years’ related work experience, Master+7 years’ related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design || 601-Wire Design & Install Engr-General

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13474 || 19-13478
Job Location: Kennedy Space Center,, FL
Per Diem: Split Per-Diem available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr

Description:
Wire Design & Install Engr 2

Location: Kennedy Space Center, FL
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Supports analysis and design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Supports the development of statements of work. Assists in the technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input used in the development of integrated design and system architecture. Works under general supervision.

Familiarity with wire harness design and electronic unit placement for aerospace applications a plus. Unigraphics NX CAD experience desired.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Number: 19-13470
Job Location: Kennedy Space Center, FL
Rate: OPEN
Per Diem: YES
Overtime: YES
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Back to Advanced Job Search