Job Search Results

249 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/12 Wednesday 12:34AM Pacific Time by ContractJobHunter. )

Listings 1 - 249

Go To My Job Tracker

Expand all descriptions

Assembler - Level 1

Description:
PDS Tech is seeking a candidate for the Assembler 1 position located in Northford, CT.  

Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary
Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.
 
Job Number: 1810080003
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/17/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eqwAAA&URLSource=cjhunter

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2460 - BUSINESS ANALYST - cv. word doc only

Description:
Produce, maintain and respect the project schedules;

Lead, coordinate and govern meeting for any Process & Tool (SAP) implementation, Adjustment or improvement with the respective project stakeholders;

Produce and maintain Project Management indicators;

Understand and document manufacturing function's business requirements and processes;

Identify and propose solutions meeting business requirement;

Participate in multifunction workshop sessions and activities following SAP implementation;

Identify and manage master data modification;

Perform SAP improvement testing with IT;

Ensure efficient communication and change management with impacted functions;

Identify and document training requirement, perform training with users and super users;

Provide support to SAP users;

Ensure user support, troubleshooting and RFCs tracking with IT teams

Have a Bachelor's degree in Industrial Engineering, Operation Management, Computer engineering or any equivalent relevant experience.

Must have a minimum of 5 years of relevant employment experience.

Have organization skills, rigor and autonomy.

Demonstrate strong leadership skills and love challenges.

Have a great sense of initiative.

Have a very good knowledge of MS Office (Excel, MS Project, Power Point, Visio).

Experience in aerospace or cabinet manufacturing industry is an asset.

Strong knowledge of SAP, a major asset.

Bilingual - (French and English) is required.
 
Job Number: 2460
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2502 - PROJECT MANAGER - METHODS - cv word doc only

Description:
Coordinate internal and external activities between different functions.

Obtain stakeholder engagement to achieve results.

Establish project schedules and participate in the development of the site plan.

Identify project risks and provide visibility on mitigation plans to mitigate / reduce risks.

Establish contact with internal and external collaborators on timelines and deliverables.

Communicate project progress through presentations and report writing.

Collect and analyze project data from different functions.

Meet key performance indicators of the program department and obtain the commitment of stakeholders.

Work on problems of various magnitudes; Apply knowledge of intermediate to complex problems, being able to work on tasks / non-standard requests.

Grasp the problems from different perspectives, innovate to achieve non-obvious solutions to problems.

Bachelor Degree in Engineering, must have previous experience in project management, preferably within an aerospace engineering environment.

Must have 8 or more years of relevant aerospace experience.

Bilingual - have a good command of French and English.

Have intermediate knowledge MS Office software suite (Word, Excel, PowerPoint).

Have knowledge at beginner or intermediate level of Microsoft Project.

Must have knowledge on implementation of change management activities.

Have strong aeronautical knowledge, especially in the industrial engineering (Methods) domain.

Must have strong experience in Methods, Logistics or Finance domain.

ASSET: Knowledge of VBA programming language.

An understanding of aerospace product certification is an asset.

Knowledge of SAP is an asset.

Must have excellent organisational skills and able to work toward aggressive deadlines.
 
Job Number: 2502
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tooling Design Engineers III

Description:
STS Technical Services is now Hiring Aerospace Tooling Design Engineers III in Savannah, Georgia!

Position Summary:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Essential Duties & Responsibilities:
Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft
Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures
Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers
Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures
Write complex procedures on use of tools
May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives
Additional Functions:
Actively works to improve daily processes, and ensures all work meets customer requirements
Assist Tool shop as needed, during Periodic and Conformity Inspections
Assist in formulating Tool Design policies, procedures, and specifications as required
Perform other duties as assigned

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering (a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job)
Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment
Tool Design experience required

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44493
Job Location: Savannah, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Cartersville, GA.  
Please reach out to Mindy Jones mjones@pdstech.com or call her at 480.212.0847

In this role, you will make utility metering equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080238
Job Location: Cartersville, GA
Duration: 4 months
Input Date: 05/22/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOCAAY&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Northford, CT.  
Please reach out to Betsy Murphy bmurphy@pdstech.com or call her at 203.415.9123

In this role, you will make fire protection controls and safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble electromechanical parts by using power drivers and/or manual tools.
  • Test Assembly Boards using automatic computer type testers.
  • Assemble metal boxes for the finished units using power drivers or manual tools.
  • Assemble carton boxes and inserts to pack the finished units.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080250
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/10/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fQSAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Systems Engineers – Contract – China

Description:
Avionic Systems Engineers – Contract – China

Our Client in China requires Avionic Systems Engineers with experience of modern civil aircraft avionics : Modern Displays, Integrated Modular Avionics, Flight Management System, On Board Maintenance System and other subsystems. You will be engaged in Avionic Systems Design, Verification, Subsystems Requirement Analysis and Systems Configuration Design. Senior Experience and / or Team Lead Experience. You must be available to live and work in China for these roles. Our Client requires continuity on their programs.

Good packages available.

Please quote ref: JO0000000068 when applying
 
Job Number: JO0000000068
Job Location: China
Duration: 3 - 5 years
Start Date: 20/1/2019
Input Date: 12/04/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
 Civil Engineer – Land Development

Client has an excellent career opportunity for a Professional Engineer in our Columbus, Ohio office with Land Development experience. The position will be a lead project engineer with the responsibilities for all aspects of planning, design and plan preparation for a variety of residential, commercial and mixed-use development projects. Responsibilities include leading a civil design team for land development projects including roadways, sewers, water mains, stormwater management systems, hydrologic and hydraulic calculations, grading, cost estimating and permitting.

Requirements:

 

  • Ohio P.E. licensure

  • 5+ years of land development engineering experience

  • Extensive experience with AutoCAD Civil 3D and all related design features

  • Excellent written and verbal communication skills

  • Strong organizational and time management skills

  • Ability to work independently as well as in a team environment


Responsibilities:


  • Oversee Project Management

  • Provide excellent client care and client solutions to develop and maintain long-term client relationships.

  • Organize and manage multiple priorities

  • Complete civil design for land development projects including site and subdivision layout and design, grading, roadways, sewers, water mains, stormwater management systems, hydrologic and hydraulic calculations, grading, cost estimating, erosion and sedimentation control and permitting.

  • Obtain permits and plan approvals for all types of land development projects from local government and state / federal agencies


 

This position offers a competitive base salary and benefits program which includes: Medical, Dental, Prescription Drug, 401(k) Plan, Life, and Tuition Reimbursement. Applicant must have a valid Ohio Driver's License, good driving record as well as proof of insurance.


 
Job Number: 18-33400
Job Location: Lorain, OH
Rate: 75000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-08-09 00:00:00.0
Input Date: 08/09/2018
Last Updated: 12/06/2018
Firm Name: NESCO RESOURCE
Attention: Mark Overton
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer - Municipal EIT (284)

Description:
*This is a full time salaried position, located in Paterson, NJ.*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing roads, storm water management and runoff, buildings, city infrastructure, etc. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:
*3 years’ experience in municipal and Civil engineering including road, stormwater runoff/drainage, erosion control, sedimentation studies, culverts, small bridges or similar design and engineering projects.

*Must reside within 1hr of Paterson, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT or PE Certification



Pluses:

*Some knowledge of AutoCAD or Civil 3D
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience



Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 284
Job Location: Paterson, NJ
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Construction Manager

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Construction Manager
(US Citizenship Required*)
McClellan, CA
2018-7239

Responsibilities:
• Oversee specialized contractors and other personnel
• Work with main construction subcontractor’s schedule and assist with coordinating all construction processes so that projects meet design specifications
• Ensure projects are completed on time and within budget
• Select subcontractors; schedule and coordinate their activities, and supervise them
• Collaborate with the Designer of Record, engineers and architects
• Plan
• Read, understand and interpret plans, blueprints and detailed drawings
• Interpret and explain contracts and technical information to other professionals
• Collaborate with architects, engineers, and other construction specialists
• Direct and coordinate activity on construction sites
• Oversee implementation of project design
• Monitor supplies
• Manage risks and potential pitfalls, (bad weather, clean build protocol delays, government / permit approval delays, supply chain problems, etc.)
• Respond to work delays, emergencies, and other problems
• Prepare cost estimates, budgets, and work timetables
• Report work progress and budget matters to clients
• Comply with legal requirements, building and safety codes, and other regulations

Qualifications:
• Wafer fabrication clean room experience overseeing the acquisition and installation of ISO Class III clean space systems and infrastructure for 200 mm wafer capable tool set build activities
Preferred:
• Proven experience as construction project manager
• Microelectronic wafer fabrication clean room build-out experience strongly desired.
• Able to track change orders and contingency draw downs
• In-depth understanding of construction procedures, material and project management principles
• Familiarity with quality and health and safety standards
• Proficient knowledge of MS Office Word, Excel, and Project
• Outstanding communication and negotiation skills
• Excellent organizational and time-management skills
• A team player with leadership abilities
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• To meet managerial expectations, Bachelors of Science or Technology degree in Engineering, or related required (or equivalent experience), and 8 years’ experience; or Master’s and 6 years’ experience
• Bachelor's degree in building science, civil engineering, or architecture preferred

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7239
Job Location: McClellan, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

EHS Safety Engineer

Description:
Are you looking for an exciting career opportunity as an EHS Safety Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849
 

Description:  


Essential Functions
 
 • Performs analysis of energetic materials operations, related physical facilities, and safety, fire and health hazards they present.
• Interprets requirements of OSHA, NFPA, EPA, DOT, DTSC, BATF, ATFE, DoD etc. for management and employees.
• Establishes and implements environment, health, safety and industrial/occupational hygiene compliance programs, promoting state-of-the-art safe and healthful work practices for the protection of personnel, physical assets, and production operations.
• Examines operations to recognize and evaluate occupational exposure to chemical and physical agents.
• Recommends and coordinates engineering and administrative controls to reduce hazards/risk and limit occupational exposure.
• Interfaces with personnel regarding Process Safety Management (PSM) hazard evaluations and control methods.
• Perform other related duties as assigned. Essential Functions
• Provides technical guidance and regulatory consulting to manufacturing and related support personnel within the site.
• Reviews operation processes and equipment designs to assess potential safety and health hazards to minimize employee injury and property destruction. • Investigates safety (EHS) related events.
• Actively participates in the development, implementation and maintenance of internal EHS procedures.
• Conducts formal EHS audits of work areas for the purpose of discovering and correcting unsafe conditions or unsafe work practices.
• Performs compliance and/or liability audits of other Pacific Scientific facilities as part of Business level teams. Includes Job Hazard and PPE assessments and analysis.
• Administers a variety of programs to ensure compliance. These programs include ESD, Ladder Management, Cranes and Hoists, Chemical Storage, Lockout Tag Out, and similar programs.
• Acts as a visible champion for safety within the site by conducting regular safety observations, strengthening relationships with employees, and delivering the appropriate and timely Hazard Communications.
• Conducts Safety Training as required
 

Qualifications:  



  • Engineer degree required in Safety, Industrial or related field.
  • Experience Required: 0-3 years’ experience minimum as an environmental engineer, safety engineer or industrial/occupational hygienist.
  • Environmental experience a plus

This is a Direct Hire position with opportunity for growth! 


 
Qualifications:  
  • Engineer degree required in Safety, Industrial or related field.
  • Experience Required: 0-3 years’ experience minimum as an environmental engineer, safety engineer or industrial/occupational hygienist.
  • Strong oral and written communication skills
  • Environmental experience a plus

 
Job Number: 1810089184
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfQFAAY&URLSource=cjhunter

ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Electrical Engineer (Software Development) - (Renton)

Description:
Required qualifications:
• Electrical Engineering experience with an emphasis in software development
• Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
• Experience with hardware and software configuration management
• Familiarity with and the ability to program with Visual Basic and C#
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Preferred qualifications:
• Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
• Ability to create and update drawings with Auto Cad and/or Autodesk inventor
• Experience with digital data busses such as ARINC 429/717.
• Experience with aviation connector interfaces and packing such as ARINC 600.
• Knowledge of web design and maintenance
• Experience programming PLCs and HMIs
• Experience with National instruments Lab Windows CVI.
• Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
• Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors
Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EERenton
Job Location: Renton, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437 Electronics Technician
Location: Fort Worth, TX
Status: Open

Request: Light Industrial - Electronics Technician
Qty: 2
Desired Start Date: 10/29/2018
End Date: 2/28/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $16.00 - $31.00 Hourly
 
Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 31/hr max
Per Diem: no
Duration: 6 months
Input Date: 12/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Engineer Tool - 4- Secret Clearance

Description:
PDS TECH INC.  is seeking Engineer Tool - 4 located in El Segundo,CA.

Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
  • Must have production assembly tooling and design background with demonstrated knowledge depth of the processes and standards used in the aerospace industry for this.
  • Must be capable of performing tool design development utilizing CATIA V5 or NX 8.5 or above
  • Ability to work within a Production Engineering team and assuming roles for tool planning and technical execution is highly desirable-must be flexible for work content and role.  Should be comfortable with creating briefing materials and presenting data in team settings for critical design reviews and other high visibility discussions.
  • Applicant should be familiar with all current GD&T and best practices for delivering and managing tool design data.

 
Basic Qualifications:
  • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.   Job related experience will be considered in lieu of educational certifications: a minimum of 8 years of experience as a level 4 tool design engineer for aircraft and aerospace structures is required.
  • Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).


Preferred Qualifications:



  • Stress Analysis competency
  • Aircraft production assembly line tool design experience for large, high complexity assembly processes, including handling and lifting fixture design experience.
  • Lofting/surfacing skills in the CAD systems noted

 
Job Number: 1810085237
Job Location: El Segundo, CA
Duration: 0 months
Input Date: 07/17/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPa6AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Renton, WA
Duration: 6 months

Description:
Required qualifications:
- Electrical Engineering experience with an emphasis in software development
- Experience working with two or more of the following: web application development, mobile application development, object-oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
- Experience with hardware and software configuration management
- Familiarity with and the ability to program with Visual Basic and C#

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
- Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
- Ability to create and update drawings with Auto Cad and/or Autodesk inventor
- Experience with digital data busses such as ARINC 429/717.
- Experience with aviation connector interfaces and packing such as ARINC 600.
- Knowledge of web design and maintenance
- Experience programming PLCs and HMIs
- Experience with National instruments Lab Windows CVI.
- Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
- Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors

Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Skill Code:
66U-Designer Engineer.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-17824
Job Location: Renton,, WA
Per Diem: Available
Input Date: 10/23/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Flammability Engineer

Description:

PDS Tech is seeking a Flammability Engineer for an open position in Mobile, AL

Position Summary: 



The Flammability Engineer will support Company cabin and cargo engineering team in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design



Primary Responsibilities: 



  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to Company requirements are satisfied. 
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve Airbus internal and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and Airbus engineering organizations.
  • Generate reports as required. Reviews and approves suppliers compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements. 
  • Perform other tasks as assigned


Experience / Skills / Training: 



  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 and 25 cabin interior and flammability requirements.
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
  • Minimum of 10 years in aviation or 5 years in aircraft compliance experience, specifically cabin and/or passenger to freighter.
  • Ability to write reports and technical memorandums.
  • Strong liaison with other departments both internally and internationally.


Education / Special Qualifications: 



  • Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering preferred.

  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications:
5 years of aircraft certification experience and 3 years flammability certification experience. 
Bachelor’s in Engineering and Part 23 or 25 certification process understanding.

 

 


Travel:



Up to 10% business travel.

 



Essential Functions:   



  • Vision: able to see and utilize computer screens; able to move through office and from point to point to find specific co-workers and in-house experts.
  • Hearing: able to hear in normal conversations and respond to warnings and signals.
  • Speaking:  able to participate in normal business conversations.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate standard office equipment and utilize electronic id to enter building
  • Carrying: able to carry up to 20 lbs./9kg. when transporting documents, printer paper and similar items.
  • Lifting:  able to lift up to 20lbs/9kg. on occasion.
  • Pushing / Pulling: able to push/pull office chairs and pieces of equipment
  • Sitting:  able to sit for extended periods of time in front of a computer terminal while writing bulletins or participating in meetings
  • Squatting / Kneeling:  able to occasionally able to squat/kneel to access items stored on low shelving
  • Standing: able to stand for long periods of time in meetings and discussions
  • Travel:  able to travel through office/work complex and occasionally within US for business meetings.
  • Walking (include routine walking such as to a shared printer to retrieve documents):  able to walk through office and production areas sometimes on uneven surfaces to reach meetings, visitors and direct others to meetings.

 
Job Number: 1810087122
Job Location: Mobile, AL
Duration: 6 months
Input Date: 07/19/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mWhoAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL QUALITY ENGINEER & TEST SUPERVISOR

Description:
JSG is looking for a Quality Engineer & Test Supervisor for a direct hire opportunity in Los Angeles, CA!

SUMMARY:

The Industrial Quality Engineer & Test Supervisor is responsible for verifying that Resistance Welding and other equipment designed and assembled by Company meets the requirements defined in our drawings, procedures and checklists. Supervision of the technicians completing the calibration and final test of this equipment is a key responsibility, as well as a key source of data for determining the compliance and reliability of that equipment. This engineer will work closely with the production managers and operators to determine the root cause and resolution of quality issues encountered in our plant. They will also work with the production planning and customer service groups to assure that equipment will be calibrated and tested in time to support the commitments given to our customers.


RESPONSIBILITIES:
The Industrial Quality Engineer and Test Supervisor will be responsible for:

Collecting and analyzing data on non-conforming products, determining root cause of non-conformances, and working with employees in the manufacturing, engineering and purchasing groups to resolve the root causes identified.
Working with the engineering group to maintain and improve the calibration and final inspection procedures and checklists for our products.
Determining the test timing required to meet product shipment commitments and working with planning to assure that equipment is assembled and delivered to the test group to allow sufficient test times prior to an on-time shipment.
Supervising the technicians doing the calibration and final test.
Collaborating with colleagues in the QSS group to share resources as required to accomplish the broader mission of the group.
Training new and veteran employees as required.
Working with the R&D and engineering groups to implement more automated testing and calibration
Providing technical information as required to the test technicians.
Troubleshooting and providing technical analysis of defects in company products
Preparing and presenting reports and information as required including quality metrics and reliability statistics.
Other projects and tasks as requested by supervisor and management

QUALIFICATIONS:
Must have at least 10 years of experience as a Quality Engineer in the Electro-mechanical equipment manufacturing industry. Experience supervising people is required. Strong knowledge of electronics and PCs is required. Experience with lasers is a plus. Demonstrated success in teams developing advanced products with electronic, mechanical and software components is a strong plus.
 
Job Number: 367273
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/23/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094540
Job Location: De Pere, WI
Duration: 6 months
Input Date: 11/01/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVfQAI&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094541
Job Location: Manitowoc, WI
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

Industrial Engineer

Description:
PDS Tech is seeking a Industrial Engineer for a position in St. Louis, MO

Job Purpose


Manage projects within manufacturing as well as projects outside of manufacturing. Determine how to manufacture parts or products, or deliver services, with maximum efficiency.

Principal Accountabilities



  • Work with Manufacturing Engineering to develop standards for various processes for production and design including forming, machining, composites, trim and drill, processing, painting, etc. 
  • Track hour’s performance for manufacturing by the various processes and programs. Analyze shop capacities for machinery and calculate percentage loads.
  • Participate in the budgeting process, financial reporting process and Continuous Improvement activities.
  • Review production schedules, engineering specifications, process flows, and otherinformation to understand methods and activities in manufacturing and services. 
  • Develop management control systems to make financial planning and cost analysis more efficient.
  • Enact quality control procedures to resolve production problems or minimize costs.
  • Design control systems to coordinate activities and production planning to ensure that products meet quality standards.  
  • Confer with customers about product specifications, vendors about purchases, management personnel about manufacturing capabilities, and staff about the status of projects.
  • Engage in supply chain management to help the business minimize inventory costs, conduct quality assurance activities to help keep customers satisfied. 

  Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Education
Bachelor's degree in Industrial Engineering preferred. However, degrees in Mechanical
Engineering, Manufacturing Engineering, Industrial Engineering Technology, or general engineering will be accepted.
 
Experience and Qualifications 
  • Candidate must have skills of creativity and ingenuity to design new production processes in many kinds of settings to reduce use of material resources, time, or labor while accomplishing the same goal.
  • Critical-thinking skills which allows for creation of new systems to solve problems related to waste and inefficiencies.  Solving these problems requires logic and reasoning to identify strengths and weaknesses of alternative solutions, conclusions, or approaches to the problems.
  • Listening skills developed through operating in teams, but they must also solicit feedback from customers, vendors, and production staff. They must listen to customers and clients to fully grasp ideas and problems the first time.
  • Math skills with a basic understanding of the principles of calculus, trigonometry, and other advanced topics in mathematics for analysis, design, and troubleshooting in their work.
  • Problem-solving skills that allow for the ability of designing facilities for manufacturing and processes for providing services, this candidate may deal with several issues at once, from workers’ safety to quality assurance.
  • Speaking/Presentation skills, candidate may have to explain their instructions to production staff or technicians before they can make written instructions available. Being able to explain concepts clearly and quickly is crucial to preventing costly mistakes and loss of time.
  • Writing skills, candidate must create documentation for other professionals or for future reference. The documentation must be coherent and explain their thinking clearly so that others can understand the information.

Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1810093348
Job Location: Hazelwood, MO
Duration: 6 months
Input Date: 10/01/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f7LeAAI&URLSource=cjhunter

Industrial Engineer 2 (4) - WA

Description:
Chipton Ross is seeking 4 Industrial Engineer 2's for a contract assignment in Everett, WA.

RESPONSIBILITIES:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

EDUCATION:
Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:30 AM - 3:00 PM

 
Job Number: 174117
Job Location: Everett, WA
Rate: $DOE
Duration: 6 Months
Input Date: 09/25/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Industrial Engineer 3

Location: Everett, WA
Duration: 6 months

Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
D26-Mfg Industrial Engrg

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-16257
Job Location: Auburn, WA // Everett, WA // Berkeley, MO // Huntington Beach, CA, WA, CA, MO
Per Diem: Available
Input Date: 10/23/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

Industrial Engineer 3 (4) - WA

Description:
Chipton Ross is seeking 4 Industrial Engineer 3's for a contract assignment in Everett, WA.

RESPONSIBILITIES:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:30 AM - 3:00 PM

 
Job Number: 174116
Job Location: Everett, WA
Rate: $DOE
Duration: 6 Months
Input Date: 09/25/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Industrial Engineer 3 - CA

Description:
Chipton-Ross is seeking an Industrial Engineer 3 located in Huntington Beach, CA.

RESPONSIBILITIES:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift 7:00 AM - 3:30 PM
This position will now fluctuate, part time to full time (20 to 40 hours per week)
 
Job Number: 174598
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 9 MONTHS
Input Date: 10/17/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Industrial Engineer II & III - (Everett, WA)

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: IEEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II - (MO)

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.
 
Job Number: IEMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III - (MO)

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

MS Project
Excel VBA Programming
Earned Value Analysis
 
Job Number: IECA
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 10/18/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Industrial Engineer roles in CA and WA states

Description:
Industrial Engineer 2 and 3
Location: Everett, WA and Huntington Beach, CA
Duration: 6+ Months

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: D26-Mfg Industrial Engrg
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 11/30/2018
Last Updated: 12/10/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Information System Security Officer (ISSO)

Description:
Location: Jupiter, FL
Rate: $65.00 - $72.00/HR
Duration: 6 month contract
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


**MUST have an active SECRET (or higher) DoD Security Clearance or to have had one within the last 2 years**
** MUST have a current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **


Duties:
-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications:
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies:
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies:
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details:
The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
 
Job Number: 10075
Job Location: Jupiter, FL
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Instrument & Controls Engineer

Description:







  • Instrument & controls engineering including front-end planning, I&C quantity and cost estimation, conceptual studies, detailed design, factory acceptance testing (FAT), and construction & commissioning support for EPC projects in Oil & Gas refineries and Chemical industrial facilities. Work in a project team environment under direct supervision of an I&C lead.Burns & McDonnell maintains a strong focus on quality deliverables which are completed on schedule.
    • Prepare instruments and control systems specifications, instruments and instrument valves data sheets, RFQs, technical bid summaries, and purchase recommendations.
    • Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.
    • Participate in the development of P&ID's and equipment/subcontract package specifications.
    • Develop logic diagrams, instrument index, I/O list, cause & effects, and control narratives.
    • Able to support construction and startup & commission activities in the field, when required\
















  • B.Sc. degree in Electrical, Chemical, or Mechanical engineering with Minimum 7 years of I&C related experience
  • EPC project experience is desirable
  • Excellent written & verbal communication and interpersonal skills
  • Ability to lead analysis and resolution of technical problems
  • Must be willing and eligible to obtain or currently hold a valid Transportation Worker Identification Credential (TWIC)
  • This position requires an individual capable of taking variety of project assignments and willing to grow professionally
  • Previous engineering experience within Oil, Gas, Chemical industry is preferred
  • PE license is preferred, ability to get the PE license is required 20% travel is required








 
Job Number: 1810092134
Job Location: KS City, MO
Duration: 6 months
Input Date: 09/11/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f27AAAQ&URLSource=cjhunter

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Manufacturing Automation Architect

Description:
Are you reacdy to make an impact within a global organization by setting up automation practices for a new facility in Milwaukee, WI?



- Integration of IOT system architecture (PLC,Client & IPC) to effectively tie in communication devices within manufacturing automated processes.

- Experience w/MES & Smart Factory, Industry 4.0 applications. -(.E. Networking, Mobile, Cloud, Big Data, Machine Learning, IOT)

- Foster an engaging environment that extends Agile methodologies and transforms teams into an effective and efficient DevOps model.

- Involved in mapping the business needs to system requirements and technical requirements.

- Provide guidance w/respect to technical specifications, integrating different technologies, platforms and people.

- Experience with end-to-end responsibility for applications such as remote operation centers, predictive maintenance, or assisted operations through augmented reality.

- Possess a broad range of skills, relating business know-how and IT, experience with Data Management, Big Data and Cloud beneficial.

- Familiarity with user interface (UI) and user experience (UX) designers (From intuitive manufacturing dashboards on tablets and mobile phones, to machine interfaces and robot interaction, augmented reality applications in operations and maintenance and finally the service and product design for the users of industrial equipment )





Basic Qualifications:

"Bachelor\'s degree (MS preferred) in Computer Science or related technical field

"7+ years of experience as a software developer

"3+ years of distributed systems experience

"3+ years of experience managing people

"Knowledge of object-oriented languages.

"Experience with OO design and common design patterns.

"Excellent analytics and problem solving skills



Preferred Qualifications:

"10+ years of relevant software development and engineering management experience

"Deep hands-on technical expertise

"Excellent verbal and written communication skills with the ability to present complex technical information in a clear and concise manner to a variety of audiences.

"Strong business and technical vision

"Ability to handle multiple competing priorities in a fast-paced environment

"A deep understanding of software development in a team, and a track record of shipping software on time

"Exceptional customer relationship skills including the ability to Client the true requirements underlying feature requests, recommend alternative technical and business approaches, and lead engineering efforts to meet aggressive timelines with optimal solution





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 18-44123
Job Location: Milwaukee, WI
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-10-16 00:00:00.0
Input Date: 10/16/2018
Last Updated: 12/11/2018
Firm Name: NESCO RESOURCE
Attention: Jacob Vana
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Manufacturing Engineer 4

Description:
PDS Tech, Inc. is seeking a Manufacturing Engineer 4 in Melbourne, FL.
 

Position Summary



We are looking for a Manufacturing Engineer 4 to join our team of qualified, diverse individuals. This position will be located in Melbourne, FL, where technology and teamwork come together. The selected candidate will become part of the Manufacturing Engineering Team at the Melbourne Design Center of Excellence working in a collaborative environment while promoting a positive, proactive and team Environment.



 



Responsibilities



  • Maintains configuration of the aircraft to Engineering requirements
  • Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
  • Translates Engineering requirements into a product build package
  • Collaborates with tool design on manufacturing requirements
  • Controls the flow of parts
  • Coordinates make vs. buy part decision
  • Structures Manufacturing Bill of Material (MBOM)
  • Defines sequence of operations and specifies procedures for product build
  • Ensures manufacturing processes and procedures are in compliance with customer requirements
  • Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
  • Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
  • Supports the build and test of product
  • Clears constraints affecting production of aircraft
  • Investigates and initiates corrective actions and improvements in product quality and efficiency
  • Collaborates with tool design to ensure product build is repeatable
  • Oversees the integration of aircraft assembly technologies and processes
  • Provides technical solutions to a wide range of complex and difficult problems
  • Experience integrating products from engineering design to manufacturing floor
  • Provides detailed written instructions that help facilitate product fabrication
  •  Independently determines and develops approach to solutions

Basic Qualifications:



  • 9 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 7 years of engineering experience with Master’s Degree in STEM and 4 years of Engineering experience with PHD .
  • 9 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality.


 



Preferred Qualifications:



  • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
  • Experience reviewing and interpreting electrical wire diagrams
  • Experience supporting aircraft hydraulic and/or fuel integration/maintenance
  • Experience supporting enhancement processes that improve production shop floor efficiencies
  • Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
  • Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
  • Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
  • Experience supporting aircraft maintenance and/or flight test operations

 
 
Job Number: 1810088999
Job Location: Melbourne, FL
Duration: 0 months
Input Date: 07/24/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002meFVAAY&URLSource=cjhunter

Mechanical Engineer - Clearance / stress analysis NASTRAN finite element modeling NX PA

Description:
Mechanical Engineer - Clearance
Contractor's Work Location King of Prussia, PA

Number of Positions 3

Assignment Type Temp to Hire

Target Start Date 12/03/2018
Target End Date 03/02/2020
Work Schedule 9/80
Estimated Regular Hours/Week 44.00
Shift 1st
OT Expected No
Straight Time (Exempt)

Drug Screen Yes
Background Checks Yes

Position Description
Perform structural and dynamic design & analysis tasks under supervision of senior engineers within The Hypersonics HCSW Program. The candidate will conduct structural analysis of strategic missile systems, hypersonic vehicles, and related components. Specific duties may include performing structural analysis of composite, metallic and electrical components related to missile systems and their related ground equipment.

Skills Required
Bachelor's or Master's degree in a Civil/Mechanical/Aerospace Engineering/Structural Mechanics program or equivalent from an accredited college/university. Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required. Microsoft Office (Excel, WORD, PowerPoint).Knowledge of and applicable experience with spacecraft or aircraft structural analysis methods, including hand calculation experience for mechanical joints. Excellent verbal and written communication skills are essential.

Skills Preferred
MATLAB, Fortran, Microsoft Office, ABAQUS, Nastran, Missile/aerospace related education/background. Ability to work in a collaborative team-based environment.

Experience Required
Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required. Microsoft Office (Excel, WORD, PowerPoint).Knowledge of and applicable experience with spacecraft or aircraft structural analysis methods, including hand calculation experience for mechanical joints. Excellent verbal and written communication skills are essential.

Education Required
Bachelor's or Master's degree in a Civil/Mechanical/Aerospace Engineering/Structural Mechanics program or equivalent from an accredited college/university.
 
Job Number: JE-104S
Job Location: King of Prussia, PA
Rate: 70/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/20/2018
Last Updated: 12/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Packaging Engineers

Description:
Packaging  Engineers (must have B.S. Engineering Degree) - #1 Rated Company in Downtown St. Louis, MO.  Email resumes to: mmccarthy@pdstech.com or call: 314-720-0572
Provide Packaging Engineering design and review for capital projects including detailed phases of the packaging engineering work, related documentation, and field support. Requires coordination of work by outside consultants and suppliers, broad knowledge of precedents in the specialty area, and an understanding of principals and practices in related specialties. Requires strong communications skills and ability to perform well on teams.

 
Provide Packaging Engineering technical assistance to operating facilities. Includes planning and implementing investigations, and includes analysis in problem areas or areas of opportunity for packaging improvement. Requires ability to collaborate with and contribute to cross functional teams.
Education:
Minimum Bachelor of Science Degree in Engineering - Mechanical, Chemical, or Industrial
 
Experience (Years/Type):
Minimum 7 years of experience in packaging equipment development and implementation, manufacturing operations, and packaging engineering support roles in the food, pharmaceutical or chemical industry.
 
Skills:
Team oriented with excellent troubleshooting skills.  Experience with researching and industrializing new packaging technologies.  Experience with P&ID development, and equipment sizing and selection.
 
Travel:
25-40% to factory locations and construction sites for field data gathering, scope development, project reviews, construction support and commissioning/start-up.
 
Job Number: 1810081121
Job Location: Saint Louis, MO
Duration: 18 months
Input Date: 08/31/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkLKAAY&URLSource=cjhunter

Production Control - (2) 1st Shift / (2) 2nd Shift

Description:
PDS TECH INC. is seeking Production Control - (2) 1st Shift / (2) 2nd Shift position located in San Diego, CA.
 
Roles and Responsibilities: 
  1. Availability for 1st or 2nd shift 
  2. Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control. 
  3. Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production. 
  4. Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules. 
  5. Assists in determining possible and actual shortages may initiate action to correct these deficiencies. 
  6. Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action. 
  7. Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates. 


Basic Qualifications:
High School Diploma and 2 years additional education and/or related experience Microsoft Office knowledge Strong Excel background Knowledge of SAP/R3 General understanding of continues process improvement Must be able to obtain a Secret Clearance
Preferred Qualifications: Knowledge of manufacturing work flow and MRP systems or similar Ability to work in a fast paced environment Experience in electronics manufacturing is a plus

 
Job Number: 1810081097
Job Location: San Diego, CA
Duration: 0 months
Input Date: 09/10/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkHSAAY&URLSource=cjhunter

Project Engineer

Description:

BASIC FUNCTION:
Conducts engineering assignments for the Engineering Department, working independently and acting as resource and lead position for less experienced personnel.

ESSENTIAL JOB DUTIES/RESPONSIBILITIES: (functions considered essential as defined by ADA)
 Defines Projects by determining project objectives, selecting technical strategies and providing technical assistance to the business unit(s)
 Plans Projects by writing specifications, developing schedules and budgets, and identifying and developing process design of additions and improvement to existing processes
 Implements Projects by monitoring performance, taking corrective actions, providing feedback to project team such as generating, monitoring, and updating operating procedures and reporting weekly/monthly, and negotiating for materials, supplies and services
 Completes Projects by delivering output, wrapping-up administrative details, evaluating the project in its entirety
 Analyzes the economics of each project where appropriate; calculates ROI for proposed projects
 Acts as a mentor to other engineers
 Tracks performance measures and recommends parameters
 Uses past knowledge and experience to ensure safe, environmentally secure, and efficient operations
 Provides documentation and operating analysis for management
May be required to do some or all of the following:
 Supports and optimize refinery or pipeline/terminal operations with troubleshooting skills
 Designs chemical or other plant equipment and devise processes for manufacturing chemicals and products
 Designs pipeline/terminal or other equipment and devise processes for crude and refined product movements via pipeline, terminals and/or tankage
 Conducts research to develop new and improved chemical manufacturing processes.
 Designs, plans layout, and oversees personnel engaged in constructing, controlling, and improving equipment for carrying out chemical processes on a commercial scale
 Provides mechanical, civil, and structural review for all new, existing, and revamped equipment and facilities to ensure consistency with applicable design standards such as API, ASME, NFPA, ANSI, OSHA, etc.
 Starts up assistance for existing as well as new facilities
 Performs economic analyses and fill ROI and AFE reports for capital upgrades
 Determines most effective arrangement of operations, such as mixing, crushing, heat transfer, distillation, oxidation, hydrogenation, and polymerization
 Develops and implement processing methods and controls to meet quality standards in the most cost efficient manner
 Investigates and resolve work-in-process problems.
 Recommends and implement improvements and/or modification in sequence of operations, equipment utilization, and related matters
 Reviews proposals of outside vendors regarding the purchase of new or modernization of existing processing equipment

Special assignments or tasks assigned to the employee by their supervisor, as determined from time to time in their sole and complete discretion.



EXPERIENCE:
A minimum of eight years of progressive work experience in a specific engineering discipline and project management experience is required. Emphasis on power distribution and controls engineering is required of the electrical discipline depending on assignment.

PREFERRED EXPERIENCE:
Professional Engineer registration, refinery or petrochemical industry experience, some or all of FCC, CCR, Alky, Sulfur unit, Delayed Coking, Lubes Processing and hydro-treating experience for Chemical discipline depending on assignment are all preferred.

EDUCATIONAL LEVEL:
A minimum of a Bachelor’s Degree in engineering discipline is required.

REQUIRED SKILLS:
Technical expert in area of specialty. Advanced ability to stay abreast of new technology developments and processes and apply knowledge analytically. Strong knowledge of Microsoft products and commonly used engineering concepts and experience with engineering software. Familiarity with standards and practices of the specific discipline. Ability to effectively communicate with others, both written and verbal communication, advanced reading and writing skills, with the ability to perform advanced mathematical calculations.

SUPERVISORY/MANAGERIAL RESPONSIBILITIES:
May be responsible for the supervision of personnel as well as contractors.

WORK CONDITIONS:
Office and plant based with up to 20% travel by land and air required. Petroleum refinery, warehouse/plant environment, and out-of-doors environment including but not limited to chemicals, pressure vessels, tanks, rotating equipment, wet and/or oil contaminated conditions, at both below grade and elevated positions, and working in confined spaces. Subject to all temperatures, weather and varying road conditions.

PHYSICAL REQUIREMENTS:
Job conditions require standing, walking, sitting, talking or hearing, making visual inspections, making precise hand and finger movements, lifting and/or carrying up to 50 lbs, climbing up to 200 ft, perceiving color differences, required to wear personal protective equipment as needed and a respirator in emergency situations (beards not permitted), ability to operate and drive all assigned company vehicles at company standard insurance rates is essential, valid State driver’s license and proof of insurance required. Job conditions may require twisting, stooping, crouching, kneeling, reaching or grasping.


 
Job Number: 1810094680
Job Location: Artesia, NM
Duration: 6 months
Input Date: 11/08/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxtpQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
Location: Chula Vista, CA

Job Summary:
•Update, and in some cases create, MS Project Plans for R&D Ceramic Matrix Composite (CMC) and Prognostic Health Monitoring (PHM) projects.
•Gather data to update plans, post standardized visual form up to 3 times per week, and update standardized milestone trackers in a visual form and post on a weekly basis.
•Provide R&D Leadership risk status using standardized format up to twice a week.
•Be expert level Microsoft Project, Excel, and PowerPoint user and comfortable working with and speaking to the team.
•Be familiar with Teamcenter and Enovia to access and status engineering documents/models is preferred.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education & Experience:
•Minimum of 5 years’ experience in the management of projects with at least 3 years in the aerospace and/or airline industry
•Bachelor’s degree in engineering technology a minimum, mechanical, aero, civil, or materials science preferred
•Expertise in developing and executing operating budgets

Skills:
•Strong interpersonal skills and a high degree of collaboration at all levels required
•Demonstrated ability to multi-task with strong task orientation and attention to detail required
•Experience in Earned Value Management (EVMS) a plus
•Demonstrated ability to produce and maintain project plans required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Experience in Risk Management a plus

Required Computer Skills:
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook
•Expertise in MS Project

Certificates, Licenses, Registrations:
•PMI Project Management Professional certification a plus
 
Job Number: 55159
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 11/20/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer w/Database Management

Description:
Senior Project Engineer

Location: Chula Vista, CA



Job Summary:
•Create a plan to effectively manage the retrofit of several thousand parts on a fleet of aircraft and over 20 airlines
•Using database management, track the progress and completion of parts coming off aircraft, those being refurbished and those being installed
•Measure progress and present status to management and stakeholders
•Work with vendors to track progress and, using knowledge of aircraft parts repairs and refurbishment, troubleshoot schedule and quality issues
•Create, maintain and present status presentation deck to team and management
•Must have understanding of maintenance, repair, overhaul and regulatory requirements in the commercial aircraft industry


Essential Functions and Responsibilities include the following.

•Update/develop/maintain databases (Access, Excel), and create Power Point reports in support of tracking thousands of parts undergoing retro-fit activity on a fleet of more than 200 aircraft operated by over 20 airlines

•Create tracking documents and presentations for technical teams, management and customer; present as needed in periodic review meetings

•Work with vendors to gauge progress, maintain schedule and troubleshoot problems if necessary

•Job functions include using continuous improvement tools, developing work instructions / standard work, and following all regulatory company procedures including thorough recording of all work to ensure traceability


Qualifications:

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Requirements:
•Proficiency with MS Project
•Proficiency with MS Excel
•Proficiency with MS PowerPoint
•Proficiency with MS Access
•Basic data analysis capability
•Familiar with SRM, CMM, EM, and AMM technical content and application

Education & Experience:
•Minimum of 5 years’ experience in the management of projects with at least 3 years in the aerospace and/or airline industry
•Bachelor’s degree in engineering technology - mechanical, aero, civil, or materials science preferred - or equivalent experience
•Basic knowledge and understanding of maintenance, repair, overhaul, and regulatory requirements in the commercial aircraft industry

Skills:
•Strong interpersonal skills and a high degree of collaboration at all levels required
•Ability to work with all levels of maintenance, engineering, and management personnel and capable of positively interacting in a team environment
•Familiarity with nacelle systems highly desirable
•Have good listening and verbal communication skills
•Demonstrated ability to produce and maintain project plans required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Experience in Risk Management a plus

Certificates, Licenses, Registrations:
•PMI Project Management Professional certification a plus





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55201
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 2+ years
Start Date: 10/29/18
Input Date: 10/17/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager, Civil Engineer PE (76)

Description:
*This is a permanent position, located in Paterson, NJ*



We are hiring for a permanent lead Civil Engineer/Project Manager for our satellite water/wastewater engineering office who will be interfacing with municipal and country utility authorities, county and city infrastructure leaders, representing and working with our internal local and main office teams in conducting wastewater/municipal civil engineering design projects. The satellite office is a small, with less than 10 people, that owes its success to a strong sense of teamwork, professionalism, and ability to bring in complex projects on time and under budget.



The position will be very customer focused, whereby incumbent will be attending public meetings, being the representative of the county/municipality in discussing the merits and details of the project with stakeholders and public. The projects you would be working on are medium sized, 2 million to 50 million gallons processed a day, located throughout NJ, but especially in North NJ.



Work will include runoff, culvert, building, street, sewer as well as potable water projects. Typical construction costs of these projects would be up to 20 million dollar projects.



Required:
*5 years’ experience in water/wastewater systems design, project management and being the team member interfacing with customers and external stakeholders.
*Experience in water/wastewater in county and municipal work, preferably within NJ; knowledge of NJ regulations.
*Candidate must live/locate within short drive to Mt. Holly NJ.
*Some knowledge of AutoCAD.
*Civil or environmental engineering degree
*State of NJ Professional Engineer (PE) License and/or be ready to apply for a NJ PE upon hire (a 4-6 week process for completion).
*Relocation assistance available for the right candidate.
*Salary plus bonus plan, commensurate with market and experience.



Benefits:
• Healthcare plan with a Health Saving Account (H.S.A)
• Dental – 2 plans to choose from
• 401(k)
• Profit Sharing/bonus plan
• Paid Holiday, Vacation & Sick time
• Life Insurance; Supplemental Life Insurance
• Short & Long Term Disability
 
Job Number: 76
Job Location: Paterson, NJ
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Recruiter (Manufacturing) CA

Description:
Request number: 5680
Job title: Recruiter (Manufacturing)
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No

Maximum Hourly Pay Rate: 35
Start Date: 11/05/2018
Tentative End Date: 08/05/2019

Job Description
Function:
Aircraft Group is looking for a Contract Recruiter for our aerospace plant in Torrance, CA. Due to growth and new contract awards, We are growing and we are in need of your help to identify and hire talent. In this role, your main focus will be on recruiting for hourly nonexempt manufacturing/skilled trades positions (Machinists, Assembly Techs, Maintenance Techs, etc.) The expected duration of this contract is 9-12 months. If you have experience recruiting for hourly manufacturing/industrial/technical positions and have a positive, resourceful attitude, we invite you to apply!

Aircraft Group is the leader of advanced flight controls for commercial and military aircraft. We are positioned on virtually every aircraft in the marketplace, supplying reliable systems that are highly supportable and add significant value for our customers. Client designs, manufactures and integrates precision motion control components and systems. Our high-performance solutions are used in satellites and space vehicles, military and commercial aircraft, launch vehicles, missiles, industrial machinery, marine applications, and medical equipment. While we are most known for our products that are the best in the industry, what’s unique about Moog is our enabling, pioneering culture. Headquartered in East Aurora, NY, we employ over 11,500 employees in 28 countries. We operate within a culture of trust and mutual respect, allowing our employees to collaborate to produce cutting edge technology.

Essential job functions:
Here's what you can expect day to day:
• Partner with hiring leaders to accurately define position requirements and develop an effective sourcing strategy
• Compose and post job ads
• Use creativity and resourcefulness to proactively source candidates
• Conduct phone screens to qualify and present candidates to the hiring teams
• Extend offers
• Maintain data integrity in the Applicant Tracking System (Taleo)
• Maintain communication with hiring teams throughout the recruitment process

Preferred qualifications include:
• Strongly prefer experience recruiting for nonexempt/hourly skilled trade positions in Manufacturing (CNC Machinists, Assembly Techs, Maintenance Techs, Inspection Techs, etc.)
• Experience carrying a requisition load of 35+ open positions
• 3+ years of full cycle recruiting experience
• Experience as a Corporate Recruiter
• Experience with Applicant Tracking Systems (Taleo strongly preferred)
• Demonstrated creativity to successfully source hard to find manufacturing skilled trade candidates
• Experience with OFCCP hiring policies and guidelines
• Bilingual Spanish/English is helpful

Education:
Minimum requirements include:
• Bachelor’s Degree
• Minimum 2 years of recruiting experience
 
Job Number: MB-5680
Job Location: Torrance, CA
Rate: 35/hr max
Per Diem: no
Duration: 10 months
Input Date: 10/26/2018
Last Updated: 12/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Representative Program & Production Control

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Representative Program & Production Control
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7258

Responsibilities:
• Analyze manual purchase requisitions for proper approvals, quality codes, and data packages.
• Determine Planning Path forward based upon MRP data.
• Minimize excess inventory by analyzing MRP planning across multiple locations, and facilitate material transfers between physical locations. Transfer for projects to align inventory to requirements as needed.
• Oracle master schedule and plan independent and dependent demands.
• Verify requirements using various systems including Oracle (MRP), TipQA, Teamcenter, etc.
• Plan, report, and analyze. Create charts of pertinent data for management review.
• Interface with procurement, Engineering, SE, and Production teams as required.
• Work with Bill of Material representatives to resolve planning issues.
• Assist material requisition requesters on creating requisitions and providing requisition status.
• Ensure proper labor charging for working a requisition.
• Coordinate planning activities across multiple plant locations.
• Some travel required

Qualifications:
• Required – able to obtain clearance as needed.
• Solid communication skills (oral and written)
• Self-directed, follows up, attention to detail
• Strong interpersonal skills; able to work in a team environment
• Strong time management skills; able to work under pressure/deadlines
• Proficient Microsoft Office Suite skills (Excel, Access, Word, PowerPoint, etc.)
• MRP planning knowledge (discrete and inventory based) and analysis experience highly desirable
• Oracle MRP Planning & ERP knowledge and experience highly desirable
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree required, in Business, Management or Supply Chain preferred.
• 3-5 years’ experience in any of the following areas preferred:
o Manufacturing (all areas)
o Supply Chain or Materials Management (all areas)
o Process or Industrial Engineering

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7258
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

SR. MANUFACTURING ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experience SR. Manufacturing Engineer for our Aerospace Client in Simi Valley, CA.


Brief Description

Successful candidate will implement lean process improvements in a precision machining environment that reduce process variation and improve productivity, as part of the Manufacturing Engineering team. This position is located in Simi Valley, CA.

Responsibilities:

Reduce scrap and non-conformances through training and improved process control
Improve sales OTD through training, set-up reduction, and process improvements
Recommend and implement new equipment, including process planning and CNC programming development.
Develop and modify manufacturing processes including process planning, process drawings using CATIA software, fixtures, cutting tools, gages, programs, special processes, assembly, and inspection
Participate in LEAN initiative and engage Six Sigma tools for process improvements
Assure that manufacturing engineering technical data is complete and accurately documented to provide an accurate technical/historical base for future reference that meet customer requirements

Qualifications:

BS Degree in Manufacturing, Mechanical, Aeronautical, Industrial, Materials Engineering
10+ years experience with most phases of prototype or small batch aerospace precision machining processes including:
Experience and knowledge of manufacturing processes and cutting tools
Fixture design
Experience and knowledge of in-process and final inspection tools and methods
Manufacturing Process Planning utilizing CATIA and MS NAV
Knowledge of special processes
Knowledge of quality management systems (AS9100)
Cost Estimating is preferred
Heat Treating and Metallurgical process knowledge
Plating and Coating process knowledge
Experience with CATIA, Microsoft Dynamics NAV, PC-DMIS is preferred
Experience with Lean, Six Sigma is preferred
Must be US Citizen or Permanent Resident Card Holder
 
Job Number: 368174
Job Location: Simi Valley, CA
Per Diem: If qualified
Overtime: Possible
Duration: 3 Month +
Start Date: ASAP
Input Date: 09/13/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

SR. QUALITY ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experienced SR. Quality Engineer for our Aerospace Client in Simi Valley, CA.

Brief Description

Support Manufacturing, Manufacturing Engineering and Purchasing Departments in Quality related Issues, drive continuous improvement initiatives throughout the manufacturing and inspection processes both at PSI Bearings and at our suppliers. Responsible for implementation and analysis of technical products, processes, and systems. May develop a range of processes and recommends alterations to improve quality of products and/or processes. Works with minimum supervision, conferring with superior on unusual matters. May be assisted by Entry/Junior or Intermediate Level personnel.

Responsibilities:

AS9100 Rev D and ISO 10012 – Strong understanding and ability to apply specified requirements in a cost-effective approach.
Reviewing New Product Launch customer specifications to flow down new requirements to all functions and ensure in establishing compliance to customer requirements
Reviewing Customer Po’s to identify requirements and flow down new customer requirements to all functions.
Ability in navigating in customer portals.
Ability to communicate with customer and suppliers to resolve processes gap.
Ability to collect, compile and analyze data (using the appropriate six sigma methods and techniques); to determine both the actual root causes of identified problems and required corrective (preventive) actions to prevent recurrence.
Able to affect internal and external PPM (scrap and rework) reduction and OTD improvements both internally and at our suppliers (machining and special processing).
Knowledge of dimensional inspection measurement systems and their application for the inspection of complex products – full understanding of ASME Y14.5 (GD&T).
Implementing Control Plans and/ or SPC to reduce inspection processes.
Performing PPAP’s (Production part approval process).
Performing process capabilities analysis on key characteristics
Aid in the process of coordinating source inspection
Review and approve of customer and internal First Article inspections (AS9102)
Performing internal audit activities including but not limited to quality management systems, purchasing, contract review process, and manufacturing.
Drive trend improvements on the internal and external Quality in support of strategic business objectives.
Act as a liaison for the production areas on matters related to contract review process and first article inspection
Identifying GE SSL (Source Substantiation List) and submitting GE SSP (Significant Process Substantiation).
Performing internal and customer corrective actions.

Qualifications:

Bachelor’s degree, preferably in Mechanical, Manufacturing or Industrial Engineering.
Minimum of 10 years Quality Engineering experience w/ 5 years experience directing Quality Engineering activities in an aerospace manufacturing (machine shop) environment.
In-depth working knowledge of Six Sigma with the ability to effectively apply recognized methods and techniques in a manufacturing environment (Green Belt or higher).
Ability to promote and foster a Continuous Improvement culture both internally and with our supplier’s (machining and special processing).
Strong understanding of contract review process and First Article Inspections.
Effective communicator – strong written and verbal communication skills.
Strong understanding of DMAIC, FMEA, PPAP, Statistical Process Control (SPC), Gage R&R Studies and lean systems.
Effectively apply appropriate problem-solving and continuous improvement techniques.
Ability to determine the appropriate dispositions for nonconforming product; function as quality representative at both Preliminary Review (PR) and MRB levels.
Internal quality audits – participate in both Internal Quality Management System (QMS) audits and customer audits (product and system).
General understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments.
General understanding of subcontracted special processes (NDT, heat treating, shot peening, plating and surface treatments).
Strong understanding of AS9100 Rev. D.
Ability to create and process GE SPS (Significant Process Substantiation)
Will train and mentor lower level engineers.
Membership in ASQ – American Society for Quality
Proficiency in Minitab and excel
 
Job Number: 368587
Job Location: Simi Valley, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 09/18/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Technician

Description:
Safety Technician

Temp to Perm

Primarily 1st shift with floating off-shift coverage

Bachelor requirement (preferred)



What you will do

Maintain the health and safety of the plant workforce by monitoring and evaluating health and safety conditions; assuring compliance with applicable policies, procedures and governmental standards; and maintenance of the Power Solutions Health, Industrial Hygiene and Safety Programs for the facility.



How you will do it

" Develop and administer effective occupational health, safety, ergonomics and industrial hygiene programs, including health services functions and maintenance of related policy and procedures in accordance with Operating System and OHSAS 18001 requirements.

" Incorporate Best Business Practices in programs under the direction of safety leadership.

" Educate, motivate and train line supervision and production personnel in good housekeeping practices, safe work procedures, PPE, etc.

" Use specialized testing equipment to sample, measure and evaluate employee exposures to in-plant chemical contaminants, including lead and acid mist, and physical agents such as heat and noise exposure. Oversee the monitoring and recordkeeping of the performance of the plant exhaust and make-up air ventilation systems and provide analysis to guide process improvement.

" Assist in the administration of medical surveillance and biological monitoring programs according to OSHA standards and company policies and procedures.

" Manage the plant personal protective equipment, work clothing and safety equipment programs according to company standards and operating budget.

" Administer the respiratory protection program, including quantitative fit testing, respirator distribution, cleaning and sanitizing.

" Develop and implement effective plant programs for the identification, prevention and control of occupational injuries and illnesses.

" Develop and coordinate plant health and safety education and training programs.

" Maintain current awareness of applicable federal, state and local health, industrial hygiene and safety regulations.

" Maintain legal, governmental and company environmental, health, medical and safety-related records according to standards, including confidentiality.

" Accompany visiting inspectors and report findings.

" Administer the plant hazard communication program, including maintaining up-to-date SDS\'s, effective identification of all chemicals, chemical inventory and related training and education programs.

" Review all manufacturing and support operations to assure ongoing safety.

" Assist the line organization in developing risk assessments and safe operating procedures for all tasks and in investigating incidents.

" Develop and implement audit programs to review and assure compliance with applicable health and safety standards.

" Accumulate, prepare and enter health, industrial hygiene, and medical and safety data into the Client computer system. Analyze data and prepare standard and other requested reports for plant and regional management.

" Overtime and off-shift work is required to meet internal and external customer requirements.

" Maintains professional competency through participation in professional education and training programs.

" Perform other duties as assigned.



What we look for

" Bachelor\'s degree preferred, preferably in Occupational Safety/Industrial Hygiene or related field.

" Previous experience with safety and industrial health programs in a manufacturing environment preferred.

" Working knowledge of OSHA regulations and industry consensus standards (NFPA, ANSI, etc.).

" Previous experience with air sampling and monitoring highly preferred.

" Must be willing to work overtime and off-shift to meet internal and external customer requirements.

" Must be willing and capable of wearing a respirator when on the production floor.

" Prior use of Microsoft Office; ability to formulate reports, spreadsheets, charts and presentations.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.





 
Job Number: 18-44218
Job Location: Holland, OH
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-10-21 00:00:00.0
Start Date: 2018-10-22 00:00:00.0
Input Date: 10/17/2018
Last Updated: 11/14/2018
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Scientist II, Molecular Biology - CA

Description:
Chipton-Ross is seeking a Scientist II, Molecular Biology for an opening in Carlsbad, CA.

RESPONSIBILITIES:
The candidate will be responsible for developing new products and will work closely with cross-functional teams including Bioinformatics, Marketing, Technical Service and/or Operations.
Successful candidates will have a strong molecular biology experience with a background in protein engineering applications including hands-on experience in protein purification, protein expression, and functional protein activity screens. The candidate will work independently in a fast-paced environment with very supportive teammates. Independently designs experimental plans, analyzes experimental data, generates laboratory protocols, and writes technical reports, quantitative analyses, and product summaries. Troubleshoots and solves difficult problems in the design/execution of development projects Investigates, creates, and incorporates new methods and technologies to improve the effectiveness of development workflows. Maintains accurate lab notebook to support protection of intellectual property in accordance with relevant Client required standards. Presents data at scientific conferences (external and internal). Interacts closely with other internal departments (i.e., Marketing, Business Development, Quality, Operations and/or Technical Services). Complies with all company safety, training, and quality regulations.

REQUIRED EXPERIENCE:
Protein evolution/characterization experience is preferred. Prior industrial experience is desirable. Strong cloning experience (standard cloning, PCR, mutagenesis,sequencing). Experience in characterizing proteins (PAGE gels, functional assays, etc). Experience in protein purification (AKTA) is desired.
Background in working with proteins and bacterial functional screens. Proven proficiency in data analysis, research design, troubleshooting, and the evaluation of new techniques and procedures for manufacturing reagents, systems, products or technologies.

EDUCATION:
A Master's degree in Molecular Biology, Biochemistry, Genetics, or a related discipline and 1-2 plus years of lab experience is required. Alternately, a Bachelor's degree with 3 plus years of experience is acceptable.

WORK HOURS:
1st Shift
Full-Time


 
Job Number: 173889
Job Location: Carlsbad, CA
Rate: Up to $36.56 DOE
Duration: 12 Months
Input Date: 09/13/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Security Support Clerk - FL - C

Description:
Chipton-Ross is seeking a Security Support Clerk for an opening in Jupiter, FL.

RESPONSIBILITIES:
(55%) Security Program Administration - Helps maintain security inventory and document control systems in accordance with federal regulation and security policies. Assists in administering the process for granting personnel and visitor access to the facility and/or access to restricted records and materials as needed or required. Assists in carrying out the security program mission by aiding in various projects and processes.

(30%) Industrial Security Administration – Assist the Security Manager/FSO in furthering the industrial security program. The candidate must be able to communicate effectively with all levels of management and maintain liaison with prime/subcontractor security personnel. Coordinate and maintain security communications and records for multiple programs. Interpret government and company policy to ensure compliance; interpret policy and provide security guidance to program management and participants. Track and maintain recurring training and program security compliance deliverables with established tools. Ability to revise and communicate effective written plans, procedures, and instructions.

(10%) Visitor Control - Visitor control functions such as preparation of badges for customer meetings, greeting visitors and customers, screening visitor identification, utilizing an access control system, badging and signing in/out visitors according to security requirements.

5%) Other - Other duties as assigned in support of company or department needs.

REQUIRED EXPERIENCE:
Ability to lift up to 50 pounds and walk for periods of time.
3-5 years experience in Industrial Security, Military or civilian equivalent

EDUCATION:
Accredited Associate's Degree (Community College, MBO)

WORK HOURS:
5/40
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 174609
Job Location: Jupiter, FL
Rate: $DOE
Duration: 12 Months
Input Date: 10/18/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

Shipping & Receiving Specialist

Description:
PDS Tech, Inc. is seeking Shipping & Receiving Specialists in Bolingbrook, IL.  Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480.351.2945

In this role, you will assist the teams that make personal protection equipment used to protect electrical workers from the hazards of their job.

What you will do:
  • Pick, pack, and prepare items for shipment using a forklift or other vehicle or tool.
  • Scan items and verify orders.
  • Create shipping labels.
  • Wrap skids to load into truck. 

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training and certification in the operation of Power Industrial Vehicles, such as forklifts, stand up, and cherry pickers 
  • Opportunity to work with a team making products to keep others safe
  • A fair and consistent pay check


Skills and equipment you will need:
  • Experience with FedEx, UPS, and LTL Freight
  • Steel-toed shoes required
  • Experience working in a warehouse environment

Education Required:

  • High school diploma or GED

Experience Desired:

  • Experience operating forklifts, cherry pickers, and RF Scanners 

Schedules/Shifts Available:

  • Most positions are 2nd shift, 2:30 pm – 11:00 pm
  • Overtime may be available, including some Saturdays 

 
Job Number: 1810080229
Job Location: Bolingbrook, IL
Duration: 8 months
Input Date: 05/31/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fKwAAI&URLSource=cjhunter

Shipping/Receiving Specialist

Description:
PDS Tech Inc. is seeking candidate for Shipping/Receiving Specialist, located in Muncie, IN.

Summary:
  • Candidate will be working in the shipping department.
  • Candidate will be working with spray foam and instapak.
  • Must be able to understand packing slips.
  • Attention to Detail (candidates will be verifying orders are complete before shipment).
  • Use of hand trucks (full-time employees generally use the powered industrial vehicles in this area).
  • Must be a team player.
  • Ability to use a tape measure (measurements must be placed on boxes for export).
  • Load delivery trucks.
  • Possess good penmanship (packing slips must be readable).
  • This area can be very physical (a lot of lifting and bending involve).
  • Confirms and records the receipt of shipments, prepares items for shipping, and loads and unloads trucks.
  • Reports damages and discrepancies for accounting, reimbursement and record-keeping purposes.
  • Completes shipping and receiving reports.
  • Also responsible for managing the inter-departmental transport of materials.
  • Relies on extensive experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a manager or head of a unit/department.


Prerequisites:
  • Requires a high school diploma or equivalent with 0-2 years experience.
  • Familiar with a variety of the field's concepts, practices, and procedures.


 
Job Number: 1810084333
Job Location: Muncie, IN
Duration: 8 months
Input Date: 04/06/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mMByAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Six Sigma Black Belt Consultant - California

Description:
Leading aerospace company are seeking an experienced Six Sigma Black Belt Process Improvement Engineer. The client's site is based in the greater Los Angeles area and they manufacture specialist products for civil and military aircraft.

The role requires Six Sigma Black Belt certification and will focus on continuous improvement and process development activities, with experience of forming/heat treatment and clean-up processes also of interest.

The initial contract will be at least 6 months, with the strong likelihood of further work beyond this.
 
Job Number: JO0000000196
Job Location: Los Angeles, CA
Rate: Negotiable
Per Diem: Possible
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 10/31/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Sr. Manufacturing Engineer - MI

Description:
Chipton-Ross is seeking a Sr. Manufacturing Engineer for an opening in Muskegon, MI.

RESPONSIBILITIES:
-Develop and document processes using equipment, tooling, and material handling (Internal and Purchased)
-Create and maintain the layout of the work area
-Work with cross functional team to ensure processes to meet Quality, Cost, and Delivery metrics
-Document processes based on supplied documentation using equipment, tooling, and material handling (Internal and purchased)
-Create and maintain the layout of the work area
-Evaluate work methods, prepare and / or modify documented work instructions
-Specify tools, gages, fixtures and any related support equipment for assigned areas of responsibility
-Interface with vendors on problem resolution, fixture design and build or rebuilding of tools and fixtures
-Train Team Leaders and UAW employees on proper execution of work instructions as needed
-Analyze new product quotes and provide cost estimates on tools, fixtures, machines, gages and recurring labor
-Support production by resolving process, producibility and quality problems using Lean Sigma techniques
-Write Scopes of Work (SOW), detailed presentations, and financial justification for the procurement of capital equipment

REQUIRED EXPERIENCE:
- Must have extensive hands on experience with machining equipment from 1950s to current (Manual, CNC and Automation)
- Availability for occasional business travel
- Availability for casual overtime based on workload and/or urgency
- Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment
- Must be familiar with, and able to utilize all Microsoft Office Applications
- Good written and verbal communication skills required
- Must have experience in working in a manufaturing machining shop ,and experienced in the following:
- Set-up and operation of manual and CNC machining equipment
- Process Planning Software
- Bill of Material structures
- Assembly fixture concepts & Design
- How to work with suppliers in the design and fabrication of fixtures, tools, parts or machines
- How to work within a union environment
- Must be able to read machining and assembly prints and correlate them with the Bill of Material and associated processes
- Must understand metric measurements and tooling
- Previously held security clearance preferred. Ability to get security clearance required
- Must be able to move freely, with or without accommodation, throughout the manufacturing environment

PREFERRED EXPERIENCE:
- Project Management experience, have used MS Project in the past and have developed Statement of Work, Work Breakdown Structure, and Schedules
- Understanding of Geometeric Dimensioning & Tolerancing techniques
- Working knowledge of using CAD models and programs in ProE and AutoCad

EDUCATION:
Accredited Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology with a minimum of 5 years experience required or 21+ years of engine manufacturing experience

WORK HOURS:
9/80, 6am - 5pm
Full-Time


 
Job Number: 174462
Job Location: Muskegon, MI
Rate: $35 to $45.00 DOE
Duration: 11 Months
Input Date: 10/10/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Sr. Site Safety & Health Specialist

Description:
Requirements:This position will be 100% travel to various projects in the U.S.
  • CIH or CAIH certification by the American Board of Industrial Hygiene, or CSP, ASP, CUSP, OHST or CHST certification by the Board of Certified Safety Professionals or equivalent nationally recognized organization, or eligible for certification or equivalent experience and demonstration of base knowledge considered.; At least three (5) years of full time work experience in the field of environment, safety and health.Current training in CPR and First Aid.OSHA construction 30hr



 
Job Number: 1810093189
Job Location: KS City, MO
Duration: 6 months
Input Date: 10/09/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f6dOAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Engineer

Description:
Job description
Stress Engineer

Apply your leadership and technical knowledge in a professional role
Collaborate with leaders from multiple teams and different sectors
Work within a global organization – position located in Winnipeg, Manitoba

About the Role

We are looking for a Stress Engineer to join our team and work for our global client based in Winnipeg, Manitoba


Responsibilities:
Perform structural design studies from the pre-design stage through certification files
Create digital representation. To simulate, using different software, the performance of one or several parts of aircraft structures
Produce numerical simulations using finite element softwares
Perform RDM stress analysis via existing tools or by tools developed by the engineer (Macro VB, Matlab ...)
Write summary or certification reports
Conduct structural design studies from preconception phase to certification records
Produce and / or evaluate possible design solutions to improve quality, cost, weight and performance based on traditional strength calculations
Create a digital representation. Simulate, using a different software, the performance of one or more parts of aircraft structures
Produce numerical simulations using finite element software
Perform RDM stress analyzes using existing tools or tools developed by the engineer (Macro VB, Matlab ...)
Write summary or certification reports
Qualifications:


Bachelor or Master’s degree in Mechanical or Aerospace Engineering
5 - 15 Years of experience in aircraft interior monuments Stress Analysis
Very strong understanding in Engineering Mechanics and Strength of Materials
Experience in hand calculations using Bruhn , Niu and ESDUs
Hands on Experience in Finite Element Analysis using PATRAN / NASTRAN for Aircraft interior monuments such as Galleys , Wardrobes and cabinets etc
Hands on experience in Cabin interior retrofits
Through understanding of TCCA - FAA certification requirements
Very Good Communication and Coordination skills
Where you will be working

You will have the chance to join an incredibly diverse and global team of engineering. You will be invited to put your expertise in challenging project around the world.

About us

We are at the heart of a technological revolution that will permanently transform our patterns of mobility, consumption, production and communication.
We are the biggest industrial players to design the products and services that will make the world of tomorrow. We are recognized by our clients for our ability to carry out such projects, with rigor, efficiency and sense of service, in compliance with our commitment to quality and our values.

Creating the new Engineering 4.0

ASSYSTEM TECHNOLOGIES valued opportunities opened by this new technological age very early on. For industry 4.0, we are designing products and services, projecting their applications into the future and anticipating the next round of developments. We are dreaming up tomorrow’s world.

Excited to start a new challenge? Apply Now!

Please note, to be successfully considered for this role you must complete all pre-screening questions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status, or any other legally protected basis, in accordance with applicable law
 
Job Number: 2555
Per Diem: Yes
Overtime: Yes
Duration: 6 month ocntract
Start Date: ASAP
Input Date: 10/30/2018
Firm Name: ASSYSTEM TECHNOLOGIES
Attention: Faith Brooks
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.assystem.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Wire Harness Engineer

Description:
10+ years of relevant systems level electrical development experience and 5+ years of harness design experience
A demonstrated history of successfully transitioning complex harnesses into production
Demonstrated expertise with harness computer aided design software such as SolidWorks Electrical, AutoCad Electrical, TurboCAD, or HarnesSys. SolidWorks Electrical experience preferred.
Knowledge of aircraft or automotive wiring and components such as connectors, backshells, relays, switches, indicator lights, etc. Candidates with harness/wiring experience in related industries, e.g., robotics, industrial automation, solar, wind turbine, watercraft also acceptable.
Substantial experience with wire connection lists, electrical schematics, wire gauge sizing and connector selection
Familiarity with cable/harness design requirements for EMI/EMC compatibility
Excellent written and verbal communication and interpersonal skills. Must be able to develop effective working relationships with multi-disciplinary engineers and project managers.
Ability to multi-task and establish/alter task priority in a dynamic development environment
Ability to use Microsoft Excel, Word, and PowerPoint
 
Job Location: Woburn, MA
Rate: 65.00hr
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/12/2018
Firm Name: CATAPULT STAFFING
Attention: Steve McSherry
Address: 68 S SERVICE RD STE 100
City, State: MELVILLE, NY 11747
Phone: 516/268-0203
Website: www.catapultstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engr 4

Description:
Seeking 10 Structural & Payload Design Engineer's 4 located in Everett, WA

RESPONSIBILITIES:
Work location in Puget Sound, site detail will be determined by assigned manager at start.
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under minimal direction.


EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Mechanical, Aeronautical / Aerospace, or Civil engineering degrees are highly preferred.

WORK HOURS:
Full-Time/First Shift
7 AM - 3:30 PM
 
Job Number: 174892
Job Location: Everett, WA
Rate: $65.80/hr - $73.10/hr
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/05/2018
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1810092835
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 09/21/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f5GBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

Structural Design Engineer 3 - 373665 - (10 OPENINGS)

Description:
Develops, integrates and documents structural and system requirements to establish the system design. Develops, maintains and modifies structural and system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.
Catia required.

Mechanical, Aeronautical / Aerospace, or Civil engineering degrees are highly preferred. Work location is in Puget Sound. Specific site will vary based on placement at start.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: 373665
Job Location: Everett, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/02/2018
Last Updated: 12/11/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer

Description:
System Safety Engineer
Location: Cedar Rapids, IA
12 month contract

This engineer will be responsible for performing System Safety Engineering tasks on new development programs, typically involving flight deck avionics, communication or navigation radios.

Basic Qualifications:
• Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline.
• Basic circuit analysis knowledge is required.
• Ability to read schematics and BOMS
• Basic knowledge of reliability techniques (RA's and FMEA's)
• Knowledge of writing technical reports

Qualifications Include:
1. Knowledge of MIL-STD-882E (DoD System Safety Standard Practice) and SAE ARP 4761 (Civil Aviation Safety Assessment Guidelines / Methods)
2. Prior experience applying MIL-STD-882E and/or SAE ARP 4761 System Safety assessment techniques in the design of safety-critical products, preferrably for military end-users.
3. Prior experience in the creation of Fault Tree Analyses and use of fault tree tools.
4. Familiarity with change management and requirements management tools
5. Familiarity with typical Reliability Engineering reports (e.g. Failure Modes Effects Analysis) and primary factors defining their suitability for use in safety assessments
6. A solid working knowledge of Microsoft Office tools is highly desirable.


Pilot training / flight experience is a plus, as is a practical knowledge of physics relevant to physical equipment hazards.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54917
Job Location: Cedar Rapids, IA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/11/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Systems Engineer - (2) - CA - C

Description:
Chipton-Ross is seeking 2 Systems Engineer 4 located in El Segundo, CA

RESPONSIBILITIES:
As an Experienced DSP Subsystems/Algorithms Engineer (Level 4), you will design and develop state-of-the-art, space based communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated team that works with domestic or international customers on their latest satellite systems.

Subsystems or Algorithm duties include:
o Designing and developing next generation RF and digital satellite communication systems
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Performing trade studies
o Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
o Supporting HDL-level design and verification
o Performing detailed system design and verification activities
o Leading teams
Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to or lead a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 3+ years of experience with Matlab or Simulink.
- 5+ years of experience in Digital Signal Processing or Digital Communications
- 5+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture design and trade design).
Preferred Skills:
- Proficiency in Matlab/Simulink.
- Experience leading teams of engineers.
- Experience working with ASICs or FPGAs
- Experience with lab equipment (oscilloscope, waveform generator, spectrum analyzer)
- Experience leading teams of engineers

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167899
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3 - CA - O/M

Description:
Chipton-Ross is seeking a Systems Engineer 3 located in El Segundo, CA

RESPONSIBILITIES:
As a DSP Subsystems Firmware Engineer (Level 3), you will design and develop state-of-the-art, space-based communication systems for commercial, civil and/or national security programs. You will be part of a highly-motivated team that works with domestic or international customers on their latest satellite systems.

Primary Responsibilities:
o Defining and developing satellite communications system and unit architecture
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Supporting trade studies
o Supporting unit-level integration and performance simulations
o Supporting HDL-level design and verification
o Supporting hardware procurement, design reviews, and unit sell-offs

Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers.
Join us, and you can build something better for yourself, for our customers and for the world.

Other Job Related Information/Qualifications:
Qualified candidate must have demonstrable experience in digital communication theory and systems, digital signal processing (DSP) concepts, waveform design and implementation, development of algorithms for hardware implementation on ASICs or FPGAs, and verification planning and principles, while applying their theoretical knowledge in resolving real world problems.

Basic Skills:
- 1+ years of education/training and/or work experience with Matlab and/or Simulink.
- 3+ years experience in Digital Signal Processing/Digital Communications algorithms and techniques (equalization, turbo/viterbi coding/decoding, channel estimation, filter design, resampling theory, etc.).
- 1+ years of experience working with ASICs or FPGAs.

Preferred Skills:
- Proficiency in Matlab/Simulink
- Proficiency in Simulink HDL Coder

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167901
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3-C

Description:
Chipton Ross is seeking a Systems Engineer for a contract position in El Segundo, CA.

RESPONSIBILITIES:
As an Early Career DSP Subsystems/Algorithms Engineer (Level 3), you will design and develop state-of-the-art, space based
communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated
team that works with domestic or international customers on their latest satellite systems.
Subsystems or Algorithm duties include:
Designing and developing next generation RF and digital satellite communication systems
Developing and verifying multi-rate, fixed-point signal processing algorithms
Conducting performance analysis of signal processing models
Performing waveform development and characterization
Performing trade studies
Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
Supporting HDL-level design and verification
Performing detailed system design and verification activities


Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to
satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers,
suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory
and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 1+ years of experience with Matlab and/or Simulink.
- 3+ years of experience in digital signal processing or digital communications
- 3+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture
design and trade design).

REQUIREMENTS:
- Proficiency in Matlab/Simulink.
- Experience working with ASICs or FPGAs
- Experience with performance characteristics of analog electronics or data converters (ADCs / DACs)
- Experience with digital/RF lab equipment (oscilloscope, signal generator, spectrum analyzer)

EDUCATION:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
First Shift - 8-5PM, 5/40

TRAVEL:
10%

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 167895
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 03/14/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 04/06/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 03/27/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Test Equipment Engineer

Pay rate depends on experience (estimated range of $50-60/hour)

The Electronic Systems Center is seeking a Test Equipment Engineer in Phoenix, AZ.

This position requires an innovative, highly motivated technically savvy incumbent with strong leadership skills.

Additional responsibilities to include embracing and facilitating design synergy between development, production and customer test stands to maximize reuse, adaptability and efficiency.

The ideal candidate will have the ability to translate high level vision/plans into workable packages and continuous improvement capabilities.

• The Test Equipment Engineer is expected to work as the team lead with Electrical, Mechanical and Software Engineers providing electronic test equipment.

• This role is also responsible for design, fabrication, programming, and validation of multiple test stands.

• Manage a suite of test stands that are supporting the life cycle of the product. Work may be required to adapt/modify stands during software development, hardware/software verification or production testing on the controllers.

• Develop new applications or modifications of existing products.

• Modify the existing test equipment software.

• Design/validate hardware to support new applications or resolve outstanding issues (e.g. harness, board, chassis designs).


• Create/modify CAN configuration files in LabVIEW.

• Create/modify ARINC 429 database in Ballard CoPilot format.

• Create software load utility to simultaneously access and load software to units.





Basic Qualifications

• Minimum 8 years of experience in the design, fabrication, and validation of industrial test equipment

• Ability to read and interpret engineering drawing and schematics

• Digital and Analog circuit design experience

• Schematic capture experience

• Strong analytical, interpersonal and communication skills. Must be autonomous (self-starter) and be able to problem solve.

• Strong knowledge of National Instrument's LabView and Teststand programming languages

• An ability to lead a team, decipher and guide others in the creation of complex software architecture.

• Proven ability to master several test equipment components of a project or program simultaneously (can't get lost in the details).

Preferred Qualifications

• VeriStand experience

• Experience leading teams across multiple sites

• Knowledge of PWB layout methodologies

• IBM Rational DOORS

Bachelor's Degree
US Citizen



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55192
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: split
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/17/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Test Equipment Engineer

Location: Phoenix, AZ
Pay Rate: $60/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
The Electronic Systems Center is seeking a Test Equipment Engineer in Phoenix, AZ. This position requires an innovative, highly motivated technically savvy incumbent with strong leadership skills. Additional responsibilities to include embracing and facilitating design synergy between development, production and customer test stands to maximize reuse, adaptability and efficiency.
The ideal candidate will have the ability to translate high level vision/plans into workable packages and continuous improvement capabilities.
• The Test Equipment Engineer is expected to work as the team lead with Electrical, Mechanical and Software Engineers providing electronic test equipment.
• This role is also responsible for design, fabrication, programming, and validation of multiple test stands.
• Manage a suite of test stands that are supporting the life cycle of the product. Work may be required to adapt/modify stands during software development, hardware/software verification or production testing on the controllers.
• Develop new applications or modifications of existing products.
• Modify the existing test equipment software.
• Design/validate hardware to support new applications or resolve outstanding issues (e.g. harness, board, chassis designs).
• Create/modify CAN configuration files in LabVIEW.
• Create/modify ARINC 429 database in Ballard CoPilot format.
• Create software load utility to simultaneously access and load software to units.

Basic Qualifications
• Bachelors degree required
• Minimum 8 years of experience in the design, fabrication, and validation of industrial test equipment
• Ability to read and interpret engineering drawing and schematics
• Digital and Analog circuit design experience
• Schematic capture experience
• Strong analytical, interpersonal and communication skills. Must be autonomous (self-starter) and be able to problem solve.
• Strong knowledge of National Instrument's LabView and Teststand programming languages.
• An ability to lead a team, decipher and guide others in the creation of complex software architecture.
• Proven ability to master several test equipment components of a project or program simultaneously (can't get lost in the details).
Preferred Qualifications
• VeriStand experience
• Experience leading teams across multiple sites
• Knowledge of PWB layout methodologies
• IBM Rational DOORS
 
Job Number: 9978
Job Location: Phoenix, AZ
Rate: 60
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/17/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Tool Design Engineer III

Description:
PDS is seeking an Tool Design Engineer III for an open position in Savannah, GA.


Position Purpose:

Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Gulfstream aircraft.



Principle Duties and Responsibilities:



Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 



Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 



Education and Experience Requirements:




Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.


Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.



Unique Skills:



Must be proficient with Catia V5

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 




 


 
Job Number: 1810093203
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/09/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f6f5AAA&URLSource=cjhunter

Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-289
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 10/08/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Tool Design Engineer III

Description:
Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Company aircraft.

Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Company aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
Unique Skills:
Catia V5

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills.
2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.
 
Job Number: 373607
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9944
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Design Engineer III (Tulsa)

Description:
• Performs engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

Unique Skills:
• Must be proficient in Catia V5

Principal Duties and Responsibilities:
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.
• Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
• Demonstrated knowledge of materials, material strengths, heat treat method and uses.
• Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education Requirements
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-299
Job Location: Tulsa, OK
Rate: $60
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Tool Design Engineer Level 3

Description:
Location: Grand Prairie, TX
Duration: 6 mos
Pay Rate: DOE - $ ph (W2)

Job Description:
Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. May use CAD/CAM to design tools.

Active SECRET clearance preferred.

Skill/Experience/Education
Must CREO/Windchill and GD&T experience
Desired SAP experience.
 
Job Number: 55312_55313
Job Location: Grand Prairie, TX
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 mos.
Start Date: 12/03/2018
Input Date: 11/20/2018
Last Updated: 11/28/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Suzanne Schmidt
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: SSchmidt@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Level 3

Description:
Our client is looking for a Tool Design individual! Apply today if you have the skills!

The ideal candidate for this position will perform the following tasks:
* Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
* May use CAD/CAM to design tools.

Mandatory Qualifications and Experience:
* CREO/Windchill, GD&T

Desired Qualifications and Experience:
* SAP

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129030
Job Location: Grand Prairie, TX
Duration: 6 mos
Start Date: 10/29/2018
Input Date: 10/17/2018
Last Updated: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Preference is candidates with Active Secret or Interim clearance but will consider candidates with no clearance;

Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. May use CAD/CAM to design tools.

CREO/Windchill, GD&T

SAP
 
Job Number: 45140
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/26/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Back to Advanced Job Search