Job Search Results

557 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/15 Sunday 07:39PM Pacific Time by ContractJobHunter. )

Listings 1 - 557

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
(3) Ice and Rain Systems Engineers

Description:
The Ice and Rain Protection Systems Engineer manages the technical aspects of one or more of the sub-systems (Windshield Heat Control, Horizontal Tail De-Ice, Wing Anti-Ice and Engine Anti-Ice).

Duties and Responsibilities:
Oversees and coordinates of all aspects of one or more sub-system project activities through all phases of the project including preliminary design, detailed design, development, certification, production, and product support.
Maintains and presents to management integrated project schedule and status for one or more sub-systems within the Ice and Rain System.
Tracks and reports status of action items related to design, development, certification and flight test related to one or more sub-systems.
Prepares and maintains functional test procedures to test the sub-system as installed on the aircraft,
Prepares and maintains functional interface control document(s) that identify the integration requirements between the sub-system and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics / electrical power system integration of the sub-system.
Conducts regression tests to ensure that the sub-system is integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the sub-system to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the sub-system.
Prepares/reviews qualification test procedures and qualification test reports associated with the sub-system.
Establishes qualification test schedules with the supplier of the sub-system and coordinate Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables.
Supports the creation of the certification plan.

Qualifications
Bachelors’ degree in Engineering or related field from an ABET accredited four year college or university.
5+ years’ experience in the design, development, aircraft integration, and certification of one or more elements of the Ice and Rain Protection Systems.

Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Knowledge of FAA processes and procedures related to qualification testing.
Knowledge of DO-160, DO-178B and DO-254 processes are required
Knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong organizational skills.
Strong presentational skills.
Excellent oral and written communication skills.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

7 Aircraft Stress Engineers with Composites

Description:
7 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/06/2018
Last Updated: 07/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2257 - PROJECT ENGINEER - cv in word doc please

Description:
Lead Integrated Product Development Team (IPDT) weekly meetings for your respective systems.

Develop, harmonize, maintain and update Schedules for each phase of the Program, with the Suppliers and Client.

Interface with the Project Management group and the Work Package leads, you will be responsible for managing the integration of the work package schedule and ensure that it is harmonized with the overall program schedule and across other work packages.

Identify and report Issues and Risks with mitigation plans.

Ensure effective delivery, review and approval of all deliverables in each program phase.

Ensure compliance to all governing documents and processes.

Participate in the problem solving and recovery plans when required to maintain key deliverables' timeline.

Bachelor degree in Aerospace Engineering or equivalent.

Have five (5) to eight (8) years of relevant experience in project management or equivalent.

Ideally have experience in aerospace.

Demonstrate excellent oral and written communication skills.

Have superior skills in MS Office including MS Project, PowerPoint and Excel.

Are a team player with strong communication skills who interfaces well with the many business partners involved.

Have experience in Project Management and or Project Engineering.
 
Job Number: 2257
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/22/2017
Last Updated: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Last Updated: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2272 - MATERIALS & PROCESSES - COMPLETIONS - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Act as M&P expert;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2272
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2273 - PROGRAM ANALYST - INTERCO- cv. word doc only

Description:
Enable the INTERCO teams by helping to identify and remove obstacles they are facing that could prevent them from meeting the program schedule.

Stay abreast of schedule risks and work with INTERCO to develop mitigation plans.

Raise issues and Report on INTERCO teams progress .

Coordinate with FAL and INTERCO teams to ensure the schedule is well communicated and understood and the individual teams%u2019 plans support the overall program schedule.

Participate in daily INTERCO FAL governance reviews.

Experience in the aerospace industry and a Bachelor's degree in Engineering or equivalent coupled with more than eleven (11) years of relevant work experience.

Specific knowledge of aircraft design, assembly and testing particularly aero-structures and wiring is essential.

Operations experience in an aerospace manufacturing environment.

Demonstrate excellent communication skills in English and French both spoken and written.

Possess strong negotiation skills and are well versed in project management.

Teamwork, customer orientation, leadership and innovation make you an effective person.

Have good knowledge of business drivers such as the financial and schedule aspects of a major development program.

Are familiar applications Microsoft Project, Word, Excel, PowerPoint

Are able to travel internationally and be able to spend extended times at INTERCO sites (St. Laurent, Belfast & Queretaro facilities) as needed.
 
Job Number: 2273
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Last Updated: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2276 - MECHANICAL DESIGNER - SURFACES - cv. word doc only

Description:
integrate all foam and upholstery build-up and installation on the seat and divan frame

Produce datasets (detail, assembly and Installation), 3D and 2D

Produce and maintain engineering drawings that define the interfaces, details and installations

Supports the W/P integrators in the design.

Produce deliverables such as PCD (procurement control drawing), AMO%u2019s (advanced material order) etc

Develop/Design with the Program's design intent and vision.

Closely communicate with supporting functions, Methods, operations, Customer support, design lead, Industrial Design, Weight and M&P.

Design for manufacturing and assembly.

Provide engineering support to Manufacturing for the installation.

Integrate all foam and upholstery build-up and installation on the seat and divan frame.

Highlight and mitigate risks to be able to meet commitments

Respect and follow guidelines BES / BAPS / BM / PDJ / standards/practices, processes and lessons learned.

Ensure design rules are respected and participate to populate the design guide lines.

Ensure the work (dataset & deliverables) are met on time with quality

Ensure customer and production standards are met.

Lead design activities with methods, production, logistics before entry in production.

Maintain an updated detailed product structure of their product, ( IDL, 3D product structure, Options matrix, etc)

Manage priorities to meet assigned deadlines.

Have a college or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have relevant technical experience in interior completion. Experience on Client Platform, Seating Design or Integration is an asset, as well as, configuration and spec%u2019ing experience.

Have solid experience working with Enovia/VPM Nav and Catia V5 (two (2) to five (5) years)

Have the understanding of product structure and relational modeling.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have strong verbal and written English communication skills including verbal French.

Also demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.
 
Job Number: 2276
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Last Updated: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2280 - CHEMICAL ENGINEER - cv, in word doc please

Description:
Part of a multi-disciplinary team (engineers, unionized staff, technicians) dedicated to optimizing processes and products for business aircraft interiors.

Identify potential solutions, product & process improvements following a scientific analysis of problems arising from interactions between various chemical products (coating systems) and their substrates.

Develop test plans and reports in order to acquire data for scientific analysis.

Coordinate test activities in a production environment in order to ensure proper procedures are followed.

Make technical recommendations as well as create/revise technical documentation in order to improve production efficiency.

Liaise with external laboratories and organizations in order to develop and disseminate a thorough understanding of business jet interior products and technical procedures.

Develop technical criteria and requirements for aerospace grade finishing and coating systems.

Degree in Chemical Engineering (or equivalent) with a specialization in polymers, coatings and organic materials (such as wood) as well as at least 10 years of industry experience.

Able to apply a rigorous engineering method along with scientific knowledge to solve problems attributed to interactions between multiple coating systems and their various substrates.

Familiar and comfortable with the aesthetic requirements stemming from application of coating systems to substrates.

Familiar with wood science & wood coatings in considered an asset.

Strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2280
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Bleed Air Systems Designers Needed

Description:
The Designer for Bleed Air Systems/Vapor Cycle Systems is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
Prepare 3D layout models of the BAS and VCS
Prepare 3D installation and detail models of the BAS and VCS
Prepare 2D installation, assembly and detail drawings of the BAS and VCS
Work in a team environment supporting liaison engineering to research root cause and address production discrepancies

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
5+ years of directly related design experience in the development and certification of aircraft BAS and VCS

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years experience
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS

The Structures Company, LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Job Title: Aero Thermal Fluids Analyst

Location: Jupiter, FL

Duration: 12+ months

Pay Rate: Flexible dependent on experience

Special Requirements:

Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years
Candidates must be U.S. Citizens
Permanent residents are NOT eligible for this role
Dual citizens are NOT eligible for this role.
Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable
Job description:

Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
Develop thermal models to design and analyze cooled and un-cooled engine components.
Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
Design, test and analyze data from component rigs to supplement or validate analytical models.
Support planning and testing of engines (ground and flight) and analyze the test data.
Document work performed in the form of reports and briefings.
Skills:

Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Education:

B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 375421
Job Location: Jupiter, FL
Rate: Open
Per Diem: No
Overtime: Yes
Duration: 12+ months
Start Date: ASAP
Input Date: 10/06/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
Now Hiring Aerospace Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Engineer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Duties:

• The successful candidate serves as an engineer driving commercial aircraft sheet-metal and composite component repair and vendor oversight
• Reviewing data and recommending and implementing changes as required
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation
• Preparing and conducting Engineering Working Group meetings
• Revising numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Occasional travel is required to support the programs
• This position will focus, initially, on aircraft composite & mechanical component systems
• This position reports to a lead engineer and the Manager of Component Engineering

Qualifications:

• Bachelor Degree in Engineering with 0-5 years’ aviation related experience focus on repair development
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are highly desired
• Understanding of composite structure related to aircraft Thrust Reverses is preferred, but not required
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.

If you are interested in an aerospace engineering job in another part of the country, take a look at all of the Aerospace Engineer jobs we have live on our aviation jobs board!
 
Job Number: 40298
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Proposal Managers - Hawthorne, CA

Description:
STS AeroStaff Services now offers Aerospace Proposal Manager jobs in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Manage the day-to-day schedule for one proposal effort
• Lead color-team reviews for proposal effort
• Identify areas where we might be falling behind, in terms of schedule
• Ability to recognize whether or not our proposal is responsive and complaint to the government’s request for proposal

Qualifications:

• Experience as a proposal manager on large-scale government procurements (ideally for the Air Force)
• Some experience writing and editing proposals for the government
• Experience working on proposals involving launch services or satellite systems preferred
• Candidate should be proficient in Microsoft Word and SharePoint
• Experience with Outlook and Excel is also highly desired

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40290
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/04/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Engineer

Description:
Job Title: Quality Engineer

Location: Cincinnati, OH

Duration: 2 to 4 Months

Pay Rate: $50/ hour

Overview:

Develops and implements product and quality systems and facilitates corrective actions to ensure conformity with customer requirements. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action and decision making.

Develops quality plans for parts processing and approval of routers, and administers and maintains adherence to these plans.
Certifies that quality specifications are met within customers’ requirements and serves as release agent for part shipments.
Serves as liaison with manufacturing engineers to improve product process.
Serves as technical quality contact with customers.
Assists with the formulation of quality control policies and procedures and recommends revisions of specifications when required.
Identifies and resolves manufacturing quality problems, and assists manufacturing personnel with the interpretation of complex part prints and specifications.
Maintains all material testing plans for customer compliance, and develops testing plans for raw materials.
Develops a fully compliant quality folder, and administers compliance and audit work, work stations, and aerospace paperwork requirements.
Teaches and mentors Quality Engineers II, and teaches quality process to Quality Technicians and manufacturing personnel.
Communicates and corresponds with customers, suppliers, employees, and management within the company regarding quality issues, problems, and complaints.
Performs other related duties as assigned by management.
Requirements:

Bachelor’s Degree in engineering, quality, or equivalent training and experience, preferably in the aerospace industry.
Minimum of 3 years as Quality Engineer II or equivalent experience.
In depth knowledge of Non-destructive Testing (NDT) processes and familiarity with the following: welding; heat treating of aerospace alloys; non-destructive testing; shot peening; coordinate measuring machines; inspection methods; and measuring and test equipment.
Proficient in the use of personal computers, blueprint reading, geometric tolerances, and application of SPC to part characteristics.
Good interpersonal and communication skills, problem solving skills, and understanding of aerospace requirements.
Must attend training and earn DQR, DSQR, and/or other customer certifications as required in order to release manufactured parts for shipment.
Physical Requirements:

Normal working environment – standing, sitting, walking – typically inside a building. Occasional stooping, twisting, lifting, bending, and carrying. Minimal or no exposure to excessive noise, dirt, chemicals, extreme temperatures, or hazardous conditions. Continual use of computers
 
Job Number: 377245
Job Location: Cincinnati, OH
Rate: $50/ hour
Per Diem: No
Overtime: Yes
Duration: 2 to 4 months
Start Date: ASAP
Input Date: 10/06/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structures Engineer

Description:
We are seeking full-time Aerospace Engineers with Structures experience to join our Flight Test Facilities in Moses Lake with the ability to work rotations in our Seattle offices. If you have 4+ years of experience in Structures, we would like to speak with you.
Job Duties
• Create and review Certification Plans.
• Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
• Review qualification by similarity and/or analysis reports.
• Review system safety documents.
• Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
• Perform Component Drawing Reviews.
• Complete aircraft assembly and installation drawing reviews.
• Participate in Systems Design Reviews.
• Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
• Support Test planning and preparation activities
• Support Pre and Post Flight Briefing.
• Monitor live flight data, typically via telemetry
• Process and Analyze Post Flight data.
• Appropriate the disposition of non-conformances, quality escapes, etc.
• Document flight test design problems for long term fixes.
• Conduct Tlight Test Report Writing.

Requirements
• Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
• 4+ years of aerospace experience.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
• A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent AeroTEC professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities for the company.
• Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts & Tooling Specialists - Fort Lauderdale, FL

Description:
STS AeroStaff Services offers Aircraft Parts & Tooling Specialist jobs in Fort Lauderdale, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide accurate tooling/ aircraft parts/ materials in a safe and efficient manner, to the Repair Station floor personnel. To maintain the stock and inventory in the designated storage area. To purchase quality goods and services for client, in compliance with client cost controls, ethics, and purchasing standards.

Job Responsibilities:

• Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors
• Determines best supply source by analyzing: best price & delivery method via Internet and media
• Identifies the most cost effective product or service, and economical/reliable inbound transportation method
• Identifies new vendors in order to meet required and future needs of the company
• Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services
• Enters and updates material requests and new vendors in Quantum
• Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval
• Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with client policies
• Faxes confirmation purchase order to vendors
• Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable
• Communicates with vendors & transportation companies to ensure on-time shipment/delivery
• Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues
• Maintains accurate records of: approvals, items ordered, and items received
• Coordinates return of defective or incorrect shipments
• Locates alternative sources of supplies, materials and parts
• Processes client rotable inventory/on-site stock/core returns to support operational functions
• Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing
• As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar Floor and Stock Room
• Arranges for safe and proper disposal of surplus materials
• Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration
• Keeps stock room clean and neat
• Follows appropriate client safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments
• Provides indoctrination safety instructions to colleagues handling the shipments as necessary
• Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians
• Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices
• Distributes to departments any miscellaneous technical information received by the stockroom
• Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records
• Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management
• Reports shipping discrepancies and damaged parts/materials to management
• Traces shipments en-route and expedites/re-routes shipments of an urgent nature
• Prepares tooling, parts, components, etc. for shipment to vendors and customers
• Determines packaging requirements from specifications, oral instructions, or knowledge of materials to be shipped and shipping conditions
• Packs, seals, labels, and affixes postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter
• Builds/repairs shipping crates as required for re-shipment
• Selects appropriate routing of outbound shipments, prepares bills of lading, and maintains records of materials shipped
• The Agent may delegate duties to any qualified assistant as necessary and with management approval, but such delegation does not relieve the Agent of the overall responsibility of the position’s job duties
• Complies with company and department norms, policies, directives, and procedures
• Guarantees reliability and quality of information
• Maintains necessary internal and external contacts
• Suggests improvements to processes and procedures
• Honors and protects confidential and proprietary documents and information
• Satisfies work schedule requirements
• Additional duties may be assigned

Education:

• High School diploma or equivalent
• Employees performing the same job function for a period of 3 years’ or more are considered qualified in the position, independent of the requirements referenced above and need not supply evidence regarding school diplomas, etc.

Desirable:

• Bachelor Degree in Supply Chain/Logistics, Purchasing, or Aerospace

Experience:

• Generally at least 3 years’ of experience in area of responsibility
• Experience in Aerospace or Aviation Shipping & Receiving, loading/unloading, handling, checking, transportation, storage and distribution of spare parts, tools, technical publications and other materials
• 2+ years’ prior work experience in Aerospace purchasing and inventory control
• English fluency
• HAZMAT knowledge
• Forklift experience

Desired:

• Executive Jets/Corporate Repair Station or Military MRO prior work experience

Knowledge, Skills, & Abilities:

• Assignments require thorough knowledge of all possible tasks and responsibilities
• Skills are effectively applied in accomplishing all tasks
• Shipping and receiving techniques
• Aircraft Parts and Tooling knowledge
• Aircraft Part & Supplies basic purchasing techniques & practices
• Basic office skills, internet explorer, MS Excel
• Knowledge of handling hazardous materials DOT – HAZMAT certificate, forklift training
• Valid Motor Vehicle Driver’s License

Desirable:

• MS Excel, Quantum, Lotus Notes

Working Conditions/Environment/ Special Requirements:

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations
• Ability to work flexible hours and different shifts if required
• Employees will be subject to the random drug and alcohol testing under FAA regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39415
Job Location: Fort Lauderdale, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/11/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Powerplant Engineers - Las Vegas, NV

Description:
Now Hiring Aircraft Powerplant Engineers!

Overview:

STS AeroStaff Services is now offering Aircraft Powerplant Engineer jobs in Las Vegas, Nevada. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Las Vegas, Nevada; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aircraft Powerplant Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

The Aircraft Power Plant Engineer is responsible for developing engineering solutions to enhance reliability and affect repair to the aircraft engines/fleet. Provides oversight and engineering expertise to contracted repair agencies conducting heavy maintenance, field repairs, engine shop repair and repairs to engine components. This position also advises and provides technical expertise to Line Maintenance to ensure on-time fleet operations.

Job Duties:

• Research and provide data for the development of modifications to improve engine/fleet reliability
• Conduct on-wing engine performance evaluations/diagnostics with issue resolution
• Maintain and enhance engine health monitoring programs
• Provide technical expertise on aircraft power plants systems such as inlets, cowls, exhaust, accessories, LRUs, thrust reversers, etc.
• In coordination with the AD Review Committee, analyze Airworthiness Directives (ADs)/implement as required
• Review of Service Bulletins (SBs), Service Letters (SLs) and other Original Equipment Manufacturer (OEM) publications to develop appropriate engineering documentation to ensure compliance and/or enhance reliability
• Develop/enhance engine and component build specifications
• Develop/refine engine shop workscopes specific to each engine/APU
• Develop Engineering Orders (EO) for the incorporation of modifications to aircraft engines, APUs and engine component
• Coordinates repair plans/implementation processes with Materials, Purchasing, Treasury/Fleet Planning, Maintenance Planning and Maintenance Control teams
• Coordinate with aircraft heavy maintenance vendors to ensure approved data is used as the basis for repairs/modifications
• Assist with CASS analysis and in development of reliability improvement initiatives
• Other duties as assigned

Qualifications:

• 5+ years’ Aircraft Powerplant Engineering experience (line and shop support)
• Knowledge of CFM56 and JT8D and RB211 engines; Airbus A319/320, MD80 and B757 APUs; and associated aircraft/engine/APU systems
• Engine health monitoring/diagnostics experience
• Knowledge of and ability to understand/research OEM manuals, Service Bulletins, Operational manuals, wiring diagrams (WDM) and schematics
• Knowledge of and ability to research ADs and FARs
• Ability to write technical specifications
• Proficient in Microsoft Office products (i.e. Excel, Word, PowerPoint, Access) and Arbortext
• Proven ability to work under pressure and meet critical deadlines
• Flexibility to work ‘off shift’ and ‘on call’
• Minimal travel and onsite visits to MRO facilities, OEMs and line stations
• Needs to have a background in powerplant engineering for at least 5 years, specifically CFM56 engines
• Must have in depth knowledge of reading and interpreting engine shop records, work scope history, service bulletins, airworthiness directives and other CFM and Airbus engineering documents
• Must have a good writing and analytical skills

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.

If you are interested in an aerospace engineering job in another part of the country, take a look at all of the Aerospace Engineering jobs we have live on our aviation jobs board!
 
Job Number: 40296
Job Location: Las Vegas, NV
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic - Aerospace (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter’s (MTGR’s), Brotje’s , C-Frames, IPAC’s etc., to assemble components in accordance with engineering specifications.

Requirements:
ALL SUBMISSIONS MUST HAVE HAD TO WORK IN ANY OF THE FOLLOWING CAPACITIES:

With Client Direct (Wichita and/or Tulsa)
-or-
With Client Contract (Wichita and/or Tulsa)

Client ID numbers will need to be provided at the top of resumes along with their Rehire Eligibility information

'Travel work' is what's needed e.g. Contractors will work in the 737 fuselage area and 'traveling' throughout the line to resolve/fix issues/rework so existing Spirit Employees can focus on their own assembly work.

MUST HAVE AT LEAST 3 YEARS' EXPERIENCE IN AIRCRAFT ASSEMBLY
Level C - Assembly Mechanics
Must have structural riveting, sealing and wiring experience.

Much have the skill and knowledge to perform in all of the general functions of Assembly Mechanic:

Assembly/Installation Structures
Sub Assembly
Sealer

Each of the functional areas described below:

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures

Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit, rig, seal, align, and adjust aircraft door systems.
 
Job Number: FD-551987KS
Job Location: Wichita, KS
Rate: $30.00/HR
Per Diem: $110.00/WKLY (if applicable)
Overtime: Yes - Possible
Duration: 90-days - (3 months)
Start Date: 10/13/2017
Input Date: 10/02/2017
Last Updated: 10/10/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Duration: 1 year contract (possibility of being extended longer)
Shift: 1st Shift


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **
** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

- 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
- 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
- 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
- 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
- 10% - Modify existing parts programs for engineering changes or program improvements.
- 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
- 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
- 5% - Participate in knowledge sharing and cross training activity within the NC programming group.


Skills:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
-Bachelors degree or equivalent experience.
 
Job Number: 8013
Job Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 10/03/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only URGENT CA

Description:
Job Title: CNC Programmer IV
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.


10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.



Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise -Siemens 840D macro programming expertise

Education: -Bachelors degree or equivalent experience.

Skills and Experience:
Required Skills:
SIEMENS
NC PROGRAMMING
LATHE

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/30/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible. This assignment could go for two years for the right candidate.
 
Job Number: MB-7352024
Job Location: Canoga Park, CA
Rate: 44/hr max
Duration: 12 month contract
Input Date: 11/20/2017
Last Updated: 12/26/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia Design Engineer

Description:
Design composite Aerospace Parts V-5
 
Job Number: 9
Job Location: East or West coast
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6+
Start Date: ASAP
Input Date: 10/09/2017
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 495 OLD CONNECTICUT PASS STE 110
City, State: FRAMINGHAM, MA 01701
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cognizant Engineer-PERM

Description:
General Summary:
The Oxygen System Cognizant Engineer is responsible for providing technical expertise in support of the Oxygen System through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
Oversee and coordinate Oxygen System project activities through all phases of the project including preliminary design, detailed design, development, certification, production and in-service product support.
Interface with other company departments, FAA and suppliers to ensure project schedule milestones are met.
Actively support the development of company infrastructure.
Maintain consolidated Engineering Parts List (EPL), weight status and cost status for the Oxygen System.
Support design, manufacturing (production), in-service and flight test activities.
Maintain and present to management integrated project schedule and status for layouts, ICD’s, drawings, development tests, certification tests, flight test plans, ITF tests related to the Oxygen System and plans/status to resolve flight test, manufacturing and in-service issues.
Track and report status of action items related to design, development, certification, sustaining, in-service and flight test related to the Oxygen System.
Provide support as required in other areas of the Mechanical Systems 2 team that includes bleed air systems, air conditioning, waste system, and ice and rain protection systems.

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program;
5+ years of directly related technical experience in the development and certification of aircraft Oxygen Systems required.
 
Job Number: LHON
Job Location: Greensboro, NC
Rate: salary-relo available
Per Diem: n/a
Overtime: TBD
Duration: PERM
Start Date: asap
Input Date: 10/05/2017
Firm Name: YOH SERVICES
Attention: Lisa Hughes
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 6+ month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** Candidates must have 6 to 9 years of experience **

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 8016
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/03/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** These rolls will not convert to a direct hire role unless circumstances significantly change **
** Candidates must have 6 to 9 years of experience **

Keywords: (MUST be seen in resume)
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 7948
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/13/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
7449330
Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

45/hr max

Number of Positions: 3

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These roles will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree

Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/30/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7449330
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 12 month contract
Input Date: 11/13/2017
Last Updated: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery FL

Description:
7352726/160505
Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery
45/hr max

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These rolls will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree

Languages:

Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7352726
Job Location: Jupiter, FL
Rate: 45/hr max
Duration: 10 month contract
Input Date: 11/21/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Manufacturing Engineer - Aerospace and Defense

Description:
San Diego, CA



Several Composite Manufacturing Engineer positions are needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Devise new approaches to resolve unusual or highly complex manufacturing problems through early, upfront design-for-manufacturing (DFM) principles to ensure producibility, inspectability, testability, maintainability and repairability.

Define and implement new manufacturing technologies.

Provides input to design, technical staff, briefs management, and participates effectively in a team of experienced professional staff.

Develop composite manufacturing processes, procedures and tooling using technical experience and collaborative interaction with the team to improve quality, eliminate non-value-added steps and shorten lead times.

Initiate and implement Lean and Six Sigma Projects to improve quality, lower costs, and remove tribal knowledge.

Oversee prototype and pilot builds, document the build process with standardized work instructions, develop shop aids and routers

Lead PFMEAs


Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM
Experience with MasterCam and Vericut


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Must have an extensive working knowledge of advanced composites production operations
Must have experience with composite lamination and composite assembly operations
Familiar with laser projector systems
Hands-on experience with Fibersim
Experience with CNC Machining tools


Required Education: Bachelor's degree is required.



Position: Contract to Hire or Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95013
Job Location: San Diego, CA
Rate: 45-50/hr
Per Diem: yes
Overtime: yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/09/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Designer III/IV

Description:
Under limited general direction and following established procedures in accordance with contractual requirements and policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.
Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: CA39225
Job Location: Canoga Park, CA
Rate: up to $60.00
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: Nov 2017
Input Date: 10/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II / Creo and GD&T Windchill CA

Description:
7457180
Job Title: Design Engineer II

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills: -Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education: -BS degree in Engineering or equivalent. MS degree is desired.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE DESIGN

# of Positions: 2

Location:
Canoga Park, CA

Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457180
Job Location: Canoga Park, CA
Rate: 40/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 11/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/24/2017
Last Updated: 07/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting Checker (aerospace)

Description:
Drafting Checker
Greensboro, NC: location
Duration: 9+ months
contract rate: DOE

Job Summary
Design Checker
Desired Skills
ROBOTICS;CATIA;Design Checker
Job Description Rich
 
General Summary: 
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.
 
Duties and Responsibilities:
1.     Check Drawing, Engineering Order and Parts List for adherence to company standards;
2.     Check 3D dataset in CATIA V5 and PLM System.
3.     Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
4.     Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews.
5.     Document and communicate issues found during reviews.
6.     Consult with design team and other checkers for interpretation or drafting rules.
7.     Act as a Subject Matter Expert regarding interpretation and application of drafting rules.
8.     Provide inputs to management on major issues being identified and help develop alternatives for solutions.
 
Education, Work Experience, Certification and/or Licensure:
1.     10+ years of experience designing mechanical and / or structural parts, assemblies or installations for aircraft.
2.     At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter).
3.     5 years of experience working with GD&T and 5 years of experience checking Aerospace Drawings.
4.     Candidate must be detail oriented.
5.     BS Mechanical or Aerospace Engineering.  Experience can used in lieu of education.
6.     Experience with composite materials is a plus.
 
Knowledge, Skills and Abilities:
1.     Familiarity with aircraft production and assembly methods.
2.     Ability to address issues identified in a direct but respectful way.
3.     Ability to consistently apply defined criteria.
4.     Able to work with people with diverse corporate / design culture background.
Physical Requirements:
1.     Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2.     Incumbents may be required to sit, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3.     Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
4.     Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
5.     Read, hear, speak, and see with no restrictions, as required by job duties.
6.     Comprehend and adhere to management directions and/or safety instructions with no restrictions.
7.     Effectively communicate in Business English language.
8.     Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
9.     Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
 
 
Notes
401K
6 paid holidays
Annual bonus

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: open
Per Diem: yes
Overtime: possible
Duration: 9_+ months
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Washington)

Description:
Electrical Engineer

Location: Everett, Washington
Duration: 6 months
Rate: up to $55/hr


Primary Responsibilities
Summary
This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards.  The Design Engineer will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
 
Tasks Performed
 
Essential Duties and Responsibilities include the following with other duties as assigned:
Assigned design tasks include but not limited to: basic aircraft electrical design, wiring  installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and  internal specifications.
Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
Participates in teams to support the development of designs. Supports the documentation of design implementation.
Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
Obtain, interpret, and analyze OEM airplane electrical design data.
Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
Troubleshoots basic electronic/electrical system/subsystems problems.
Actively support engineering department goals and initiatives.
Coordinate with other departments as necessary.
Utilize internal drawing/document standards per customer or regulatory agency requirements.
Some domestic or international travel may be required.
Perform engineering design check and sign documents.  With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems.
Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc.
Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc.
Define engineering task scope (such as work scope validation) for design tasks.
Perform engineering design/analysis with minimum technical guidance.
Provide junior level mentoring and performance management input to PE/Functional Manager.
Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).
Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments.
Act as design authority for design tasks.
Define engineer tasks for PE/functional manager.
Desired Education
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Degree
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Job Experience

Education and/or Experience
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field and 8 years or more of experience or equivalent working experience (18 years minimum in an aerospace related field).  Education level required, and amount of relevant experience required here.

Notes:
Should have Aircraft Modification or Retrofit Experience, Electrical background.
experience in any of the following
Aircraft Installations
Boeing Aircraft preferably 777
AutoCAD
Electrical Systems design
Wiring Diagrams
Harness design
Cabin Databases and Lighting Databases is a plus

The Structures Company, LLC is an AA/EOE
 
Job Location: Everett, WA
Rate: up to 55/hr
Per Diem: yes
Overtime: possible
Duration: 6 mos +
Start Date: asap
Input Date: 12/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements. Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry. Responsibilities • Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test) • Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance • Assist Control Account Manager with Estimate to Complete • Coordinate activities associated with review and approval of engineering specifications and engineering drawings • Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support electronic Engineering Change process. • Coordinate, track and support the assembly and test of development hardware • Support supplier selection and part procurement • Provide status reports • Support program reviews both internal and external • Coordinate closure of action items • Support operations to fabricate, assemble, test and qualify flight hardware • Ensure standard work flow maps are complete • Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Skills/Experience • Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development • Strong project management, organizational and prioritization skills • Ability to work independently or as part of an integrated product team • Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders • Ability to read and understand technical manuals, blueprints or drawings • Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results • Understanding Earned Value Management Basics • Strong troubleshooting and problem solving skills • Must understand fundamentals of Root Cause Analysis • Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information • Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 39085
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Design Engineer

Description:
Seeking an Engine System Design Engineer based of Canoga park, CA.

Duties:
%u2022 Performs engine system level design tasks for liquid rocket engines.
%u2022 Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
%u2022 Additional duties may include in-house/vendor fabrication and test support as needed.
Skills:
%u2022 CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
%u2022 Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.
Education:
%u2022 Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 377111
Job Location: Los Angeles
Per Diem: NO
Overtime: YES
Duration: 12 mon.
Start Date: ASAP
Input Date: 10/05/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Rashmi Bhalla
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 07/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer(Aircraft Interiors)

Description:
POSITION SUMMARY

Develop aircraft structure designs and interior cabinetry assembly/installation drawings. Understanding of sheet metal, composite honeycomb and veneer techniques for cabinetry design. Attention to aesthetics of completed designs is very important.



JOB RESPONSIBLITIES



• Develop executive aircraft interior engineering packages based on market, product and certification requirements in order to ensure adherence to quality as well as the overall program cost and schedule goals
• Ensure project related engineering data is in compliance with corporate policies and certification requirements
• Applies technical principles, theories and concepts to solve a wide range of challenging engineering problems


ESSENTIAL KNOWLEDGE, SKILLS, AND ABILITIES



Education:



• Must have a Bachelor’s degree in Engineering. Aerospace or a related field.


Experience:

• Prior executive aviation interior background is required
• Minimum 5-7 years of experience in Executive Aviation Interiors specialized functional discipline


Knowledge, Skills & Abilities:

• Previous STC and 337 experience
• Customer focused with good relationship building skills
• Demonstrated advanced knowledge of aircraft interior, manufacturing, installation and certification
• Highly motivated
• Comprehension, understanding and execution of broad practices associated within the field assigned and related fields.
• Applies these understandings in the completion of complex work assignments.
• Role requires application of advanced skills attained via greater years of experience towards solving complex issues and problems.
• May act as Project Representative from immediate group they are assigned to in the resolution of problems/issues encountered across multiple functions which require a coordinated response.
• Impact within job and their department based on their work responsibilities begins to regularly extend to certain other functional groups within the organization.
• Errors could adversely impact internal and/or external customer business relationships and could result in moderate to significant work delays and/or costs to correct.
• Performs Work assignments that are truly of an independent nature but still based on objectives determined by others.
• Significant leeway is established at this level to determine the best individual approach to achieve stated objectives.

• Work is typically reviewed at the time of project completion rather than on an ongoing or periodic basis.
• Typically provides guidance on task completion to more Junior Team Members and may also review and check their work assignments.
• Proficient computer skills with use of Microsoft office applications
• Proficient in CATIA is desired. Training will be provided if required
• Customer focused with good relationship building skills
• Professional appearance and demeanor
• Must possess good written and oral presentation skills
• Effective time management and organizational skills; ability to become involved in a number of projects in a fast paced work environment.
• Portuguese or Spanish language skills a plus


Working Conditions / Environment/ Special Requirements
 
Duration: Perm
Input Date: 10/24/2017
Firm Name: YOH SERVICES
Attention: Justin Udany
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-014
Job Location: Greensboro, NC
Rate: $62-$72/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Sales Representatives

Description:
Job Description
PRIMARY FUNCTIONS:
Develops and maintains productive business relationships with current and potential customers, organizations, and partner companies.
Creates technical presentations for customer presentations.
Responsible for developing/continuing a relationship with customers of our current products/technologies.
Serves as the primary contact for customer inquiries, general correspondence, requesting technical and pricing data, and other business transactions.
Works closely with the Leadership Team in developing and implementing a strategic Business Development plan that correlates to the divisions market.
Works closely with internal engineering and program managers to ensure a solid win approach.
Analyzes market data, funding profiles, and technical expectations for new business opportunities.
Responsible for sales efforts in the field to maximize market penetration to increase sales and profits for the Aftermarket business.
Identifies product needs through customer knowledge and works with Product Line Management and Engineering to develop business case evaluations for the justification and launch of new products.
Provides market analysis to executive level management regarding opportunities and strategies.
Identifies new and adjacent markets into which to expand our business.
Performs other related duties as required.
Job Requirements

Business experience with airlines, MRO and parts brokerage companies.
Must have experience developing new business domestically (International a plus)
Solid relationships, business development management experience, excellent research and report writing skills, dynamic and creative problem solving, as well as professional and positive interpersonal, verbal, written, and presentation skills.
Ability to anticipate areas of growth on specific platforms and programs which compliment Company’s capabilities and follow through with forecasted business through put and profitability.
Ability to establish and maintain collaborative relationships with internal and external customers.
Direct experience capturing new business in the market and knowledge of customers’ acquisition processes/practices.
A strong ability to assess and understand customer technical requirements, as well as understanding and providing value added alternatives to customer solution.
Heavy Engine Shop MRO experience. Specifically looking for some knowledge with Tubes, ducts manifolds, hot section parts and engine mounted accessories…

PREFERRED QUALIFICATIONS:
Technical and Program Management background
A European second language (for the East Coast sales rep)/ Asian second language (for West Coast sales rep)
Preferred to have experience with aircraft engine overhauls.
Proven record of developing new business with aftermarket, military, government agencies, and prime contractors
Established relationships in the MRO and OEM sectors with a proven track record of winning new business including research and development projects.
The ideal candidate will have a strong understanding of the components and systems market with a technical knowledge of systems inclusive of rigid tube components and the systems they normally operate in.
Ten or more years aerospace MRO/OEM experience.
Travel required - 65%
 
Job Location: Miami, FL
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
- Stability & Control
- Aircraft Performance
- 6DOF Flight Simulation

Essential functions:
� Define and validate flight test specifications
� Perform data review and analysis for verification of aircraft level requirements
� Utilize flight simulation models and data
� Support ground and flight test activities
� Prepare flight test reports

Desired Qualifications:
� Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor or advanced degree in Aerospace Engineering.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Design

Description:
The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

Duties and Responsibilities:
1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
2. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Applies material properties and design allowables, processing processes and quality engineering specifications.
3. Designs structural products and components of products, as well as Systems level integration, evaluates alternatives including cost and risk, supportability and analyses for total systems. Analyses are performed at all levels of total system to include: concept, design, fabrication, installation, and operation.
4. Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
5. Supports fabrication and installation of test equipment.
6. Resolves all issues related to design, documentation, procurement, fabrication, and installation.
Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
2. 5 years’ experience in aerospace design and testing.
Knowledge, Skills and Abilities:
1. Proficient in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
3. Strong computer operating systems skills.
4. Excellent oral and written communication skills.
5. Excellent interpersonal skills.
6. Experience with aircraft data acquisition systems.
7. Experience with FAA regulations.
8. Excellent analytical skills.
 
Job Number: 28-017
Job Location: Greensboro, NC
Rate: $35-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/13/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Software Engineer

Description:
DUTIES:Simi Valley, California 93065

• Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.

• Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.

• Coordinate the use of test ranges with UAV Operators and Observers.

• Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.

• Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.

• Debrief engineering and management team on results of flight and simulator tests.

• Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.

• Position may require up to 25% travel.



QUALIFICATIONS:

• Bachelor’s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.

• 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 – 9 months).

• Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS’s).

• Minimum 3 years of experience conducting system tests or flight tests.

• Ability to develop ad hoc tests to troubleshoot test failures.

• Ability to analyze test data using software tools like MATLAB or Excel.

• Desired hands on lab experience in test engineering, including use of test and measurement equipment.

• Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
 
Job Number: WW081817AERO
Job Location: Simi Valley, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 10/04/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel Systems Engineer
Location: Southeast
Duration: 12+ months
Rate; Open, DOE

General Summary:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
1. Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
2. Manages task execution to ensure on-time and on-target completion.
3. Searches for problem root cause and develop corrective action plans and solutions.
4. The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
a. Support fuel system production and field issues with troubleshooting.
b. Implement design improvements to the current fuel system design.
c. Interface with current fuel system suppliers to manage supplier changes.
d. Participate in testing including supplier qualification testing, and HACI flight testing.
e. Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA.
5. An additional role for this position within the team will be as a fuel system performance analyst. It is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
a. Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster.
b. Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations.
c. Comparing analysis results to flight test data.
d. Evaluating performance impact of proposed design changes.
e. Writing reports documenting analysis results.
6. Additional roles within the team may be available at different program phases. Team roles are assigned based on capabilities of the team members and adjusted periodically as new skills are acquired or departmental needs change. The ideal candidate will have a broad skill base and a willingness to take on new roles and responsibilities over time.


Education, Work Experience, Certification and/or Licensure:
1. BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
2. Previous aerospace experience at either Supplier or OEM
3. Some Travel will be required

Knowledge, Skills and Abilities:
1. Familiar with industry documentation for design, test, and certification of propulsion systems
2. Proficient in Microsoft Office Products.
3. Familiar with FAR Part 23 or Part 25.
4. Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.

Physical Requirements:
1. Incumbents may be occasionally exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Position involves primarily desk work with a computer.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
5. Effectively communicate in Business English language.
6. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.

The Structures Company is an AA/EOE.
 
Job Location: southeast, souteast
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 10/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer (3 openings)

Description:
Interior Design Engineer
3 openings

Location: Southeast
Contract duration: 12+ months
Rate: Open, DOE

General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Familiarity with structural analysis methods, load paths, and material properties
5. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
6. Makes recommendations to engineering lead/management.
7. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
8. Ensures adherence to program schedule.
9. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. Minimum of 3 years with a maximum of 20 years engineering design experience directly related to mechanical/interior design for commercial aircraft required.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

The Structures Company is an AA/EOE.
 
Job Location: southeast, southeast
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER - DESIGN/ANALYSIS/SUSTAINING -

Description:
Johnson Service Group (JSG) is searching for a Mechanical Engineer with a strong background in design, analysis, and sustainability, to assure the performance of hydraulic actuation components, currently in service on commercial and military aircraft.

Summary of Job Scopes:

3-6+ years of related mechanical sustaining engineering experience, ideally with hydraulic actuators and hydraulic control valves, or similar products for the Aerospace Commercial and and Defense industries.
Requires mechanical engineering expertise with hydraulic control valves and hydraulic actuators.
Working knowledge of gears is a plus.
A qualified candidate will interface with the Quality Assurance and After-Market Organizations to support the investigation of field failures or internal proposed changes.
Responsible for interfacing with design and analysis engineering organizations to implement proposed design changes.
Requires working knowledge and understanding of requirements verification processes to assure the successful implementation of any proposed design changes.
Responsible for assuring the existence of artifacts that document the verification of any proposed design changes.
Position requires a working knowledge of data configuration management and change control process.
Responsible for interfacing with configuration management organization to assure the release and control of relevant configuration data.
Requires working knowledge of aerospace standards, i.e. relevant SAE ARP, FAA regulations & guidance, military standards, etc.
Working knowledge of ATA 2000 is a plus.
Responsible for determining the effort (hours) and the duration (time) required to generate all technical support for the sustaining activities.
May carry out complex or novel research assignments requiring the development of new or improved techniques and procedures.
May promote and implement process improvements company-wide.
May write product standards and design guidelines.
Required Skills and Expertise:

Fishbone - Ishikawa diagrams / Fishbone Diagrams, Herringbone Diagrams, Cause-and-effect diagrams
8D (8 step problem-solving process)
Systemic Solutions
A3 - a structured problem solving and continuous improvement approach, first employed at Toyota and typically used by lean manufacturing practitioners
Root Cause Corrective Action (RCCA)
Lean Six Sigma
Step-by-step troubleshooting
Education:

Bachelor's Degree in Mechanical Engineering or a similar technical discipline
 
Job Number: 360481
Job Location: Duarte, CA
Rate: $46
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 09/26/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 3

Description:
MP&P Engineer 3

Location: Hazelwood, MO
Duration: 12 months

Job Description:
Client needs a Materials and Processes engineer to provide support to client Production Military Aircraft Programs to qualify suppliers for composite airframe parts and bonded assemblies production. This position will troubleshoot critical, time sensitive production issues and recommend long-term solutions to prevent reoccurrence. You must have the technical ability and the fortitude to solve the root causes of problems. Candidate will work with a wide variety of high performance polymer materials & processes both in internal operations and with external suppliers, delivering cutting edge performance on schedule and on budget. Candidate must be able to gain a security clearance.

Skill Code:
MP&P Engineer 3

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
You must have experience with supplier qualification activity.
You must have material & fabrication experience with aerospace structural composites
It is desirable to have experience with rotomold and injection molding processes
 
Job Number: 17-17285
Job Location: Hazelwood, MO
Per Diem: Split
Overtime: possible
Duration: 12 months
Start Date: 10/20/17
Input Date: 10/04/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Electrical Engineer

Description:
• Provide Material Review Board (MRB) engineering support for production line and flights as related Avionics and Electrical Systems (Avionics, CMS, Lighting, power Generation/distribution, Engine control, Entertainment, Fly-By- Wire, etc ) issues.


JOB RESPONSIBLITIES

• Perform functional analysis for non-conformities based on design criteria and certification reports for Electrical and Avionics Systems issues.
• Create software performance / certification reports for Airworthiness Representatives.
• Aligns responsibility for technical dispositions of non-conformities.
• Evaluate technical dispositions impact on production schedules, safety, quality aspects, documentation and costs/benefits involved.
• Direct interface with other internal/external engineering areas involved with non-conformity analysis.
• Substantiate the approval of non-conformities considered “major” and present it for the local authorities as required.
• Facilitate dispositions for non-conformities detected on supplier components in case of design responsibility.
• Validate supplier’s dispositions for non-conformities in case such supplier is not delegated as MRB.
• Initiate the design revision process for those cases in which the disposition will affect interchangeability or maintainability of the product.
• Process small drawing changes to correct any repetitive Non-Conformance MRB issues on the production Line.
• Provide engineering support for trouble shooting on production line and production flights.
• Apply technical principles, theories, and concepts to solve a wide range of challenging engineering problems
• Responsible for compiling analytical results into a report format for customer review and approval.
• Ensure project related engineering data is in compliance with corporate policies and certification requirements
• Assigns responsibility for technical dispositions of non-conformities for the above systems on production line.
• Elaborate dispositions for non-conformities detected on supplier components in case of design responsibility.
• Start design revision process with engineering staff for those cases which the disposition will affect interchangeability or maintainability of the product.
• Ensure project related engineering data is in compliance with corporate policies and certification requirements.
• Provide mentorship, training, and guidance for junior engineers.


ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES



Education:

• Must have a Bachelor of Science in an Engineering discipline is required (Electrical or Aerospace)


Experience:

• Consultant Level Individual Contributor on a functional group.
• Generally 3-5 years of experience in an aircraft systems functional discipline in an aerospace engineering related field.
• Recent experience in aircraft systems.
• Aircraft operation/maintenance (MCC) or production line experience desired (professional levels).
• Prior MRB authorization preferred
 
Duration: Perm
Input Date: 10/24/2017
Firm Name: YOH SERVICES
Attention: Justin Udany
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer- Full Time

Description:
DATE: 10/5/2017
TITLE: MRB Engineer FULL TIME
SERVICE: Cleveland
IMMEDIATE SUPERVISOR: Engineering Manager


JOB SUMMARY
Reporting to the Engineering Manager, the MRB Engineer identifies, analyzes verifies and gives a provision on the integrity of rejected landing gear components. He/she determines the actions to be taken with manufactured parts or repair and overhaul components which become non compliant to customer requirements and within a short delay in order to minimize financial impacts and delivery delays.

Working in a dynamic environment, rich in operational complexity, we are seeking to find an MRB Engineer who is strong in technical problem solving, can demonstrate sound judgement, and acumen for organization and communication at various levels of responsibility.


We have a long-term contract with The Boeing Company to supply complete landing gear systems for the Boeing 777 and Boeing 777X program. This contract is the largest ever awarded to our landing gear operations.

RESPONSABILITIES
The MRB Engineer:

- Evaluates and analyzes defects in parts from technical documents such as drawings, technical repair manuals (TO), customer specifications, stress reports in order to gather all the necessary information for the acceptance or rejection of a part that no longer meets standards during production.

- Ensures that the parts are structurally adequate by calculating constraints and safety factors or by asking the stress engineering department in order to make a final decision.

- Ensures that the assembly function is not affected by verifying the functional and structural aspects of the rejected part and develop a method for possible repair or condemning the part.

- Completes documentation of non-compliances with a final provision that meets customer requirements.

- Communicates if required any additional information to customers.


QUALIFICATIONS
- Mechanical or Aerospace Engineering Degree
- Minimum of five (5) years experience in the aerospace industry
- Special knowledge in drafting and interpreting specifications
- Expertise in the following areas:
o Required design
o Static Analysis, fatigue and reliability
o Functioning of a landing gear
o Installation of a landing gear
o Required certification
o Materials, special processes and their limitations
o Production processes and their limitations
o MRB Procedures
o Open to travel
o Strong stress background highly regarded
o Ability to work in a cross-functional, multi-disciplined team
o Advanced problem solving skills
o Good verbal and written communication
 
Job Number: 0900
Job Location: Cleveland, OH
Rate: DOE
Per Diem: No
Overtime: NO
Duration: Full Time
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: ADECCO ENGINEERING & TECHNICAL
Attention: Collin Ponzo
Address: 2101 4TH AVE STE 1335
City, State: SEATTLE, WA 98121
Phone: 904/748-6053
Website: www.modis.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manager Sales and Marketing - NTD

Description:
SUMMARY STATEMENT
Develops solutions to a variety of complex and unusual problems that require independent judgment and ingenuity to modify procedures standards related to Sales, Strategy and Marketing. Work is accomplished under general direction and completed work is reviewed for results.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Accomplishes results through direct reports and staff working within established organizational objectives. Performs typical responsibilities of management requiring planning, evaluating, organizing, integrating, and coaching. Work is reviewed for adequacy in meeting cost, schedule and quality objectives.

Performs analysis to support due diligence reviews of new business opportunities. Coordinates responses to requests for proposals to ensure responses are correctly priced and meet the requirements of the customer as defined in the request for proposal.

Receives, coordinates and interprets new and current contracts requested by customer. Represents the Company and negotiates contract changes and amendments with the customer.


Researches market conditions and conducts feasibility studies to determine market demand for existing and new products or services. Identifies and projects the potential of the Company to enter into or increase market share within the transparency markets. Develops strategic marketing and business plans to increase the number of Company products and products lines in the market to meet revenue goals. Identify market growth opportunities and present these as part of new product development requirements.

Supervises initiatives for new product development based on analysis of the potential market. Provides analytical support for comprehensive business plans, including business modeling and business case/plan, customer segmentation, entry strategy, pricing, operations, technical requirements, risk evaluation, etc.

Partners with management to develop and execute comprehensive short and long-term sales plans and programs that will achieve the sales and revenue objectives of organization.

Contacts established and prospective customers in the assigned area to solicit orders in person or by phone. Discusses suitability of different types of products or services that will meet customer requirements. Quotes prices and credit terms and assists in preparation of sales contracts for orders obtained. Investigates and resolves customer problems with deliveries.

Prepares briefings and reports for executive management quarterly and/or as the business situation requires.

ANCILLARY JOB FUNCTIONS AND RESPONSIBILITIES
Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
Formal Education, Training, and Professional Certification and Work Experience:
Bachelor Degree in an or other appropriate discipline from an accredited four-year college or university and eight (8) or more years related experience and training, or equivalent combination of education and experience. MBA preferred but not required. Previous aviation experience preferred but not required.

STAKEHOLDER BEHAVIORAL STANDARDS
All Stakeholders: Integrity, Teamwork, Communications, Customer Focus, Initiative and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

ALL LEADERS
Approachability, Drive for Results, Motivating Others, Managerial Courage, Decision Quality.

ALL MANAGERS
Priority Setting, Planning and Delegation.

STANDARD JOB REQUIREMENTS
Must be able to arrive at work on time, work on-site, and attend regularly.
Must be able to read and write the English language, perform basic mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.
Perform work of subordinates.

SPECIAL JOB REQUIREMENTS
Prior management and contract negotiation skills.
Sales and customer service experience.
Flexibility to respond to off-hours business needs
Freedom to travel domestically and internationally

SPECIAL TRAINING
Safety training applicable to the job and the general work area.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk and hear. The Stakeholder frequently is required to move from one place to another. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five
(5) days per week, if required. NRD: Must be able to ascend and descend stairs.

WORK ENVIRONMENT
Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
 
Job Number: 17-788-13388
Job Location: Midwest
Rate: 110-115K
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Cable Assembly) CA

Description:
Job ID# 13703
Title TEMP Manufacturing Engineer (Cable Assembly)

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

This position will support the design (DFM), first article, production, test, and system integration of wire harness and cable assemblies for all UAV platforms including Ground Control Stations (GCS). Cable designs predominately incorporate Mil Spec and commercial components and wires; shielded and unshielded single/multi-conductor wires; RF connectors and cables; sensors and other devices.

DUTIES AND RESPONSIBILITIES:•Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design harness board and shop aid tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications •Requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree.
•Expertise in assembly methods and processes, including wire cutting, stripping, splicing, and soldering; contact/terminal crimping; marking; and heat shrinking is desirable.
•Experience with molding/potting and shielding is desirable.
•Experience with electrical testing including Continuity, Insulation Resistance, and Dielectric Withstanding Voltage testing, as well as related equipment, including wiring analyzers and network analyzers is desirable.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences.
•Proficient with Microsoft Office Word and Excel.
•Experience with Outlook and Power Point. Ability to use CAD programs for tooling design is desirable.
Additional Preferred/Desirable Qualifications
•Experience with IPC & MIL standards, including: IPC/WHMA-A-620 – Requirements and Acceptance for Cable and Wire Harness Assemblies, J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029) – Electrical Connector Contacts, MIL-DTL-38999 – Circular Electrical Connectors, SAE-AS50881 (MIL-W-5088) – Wiring Aerospace Vehicle, NAVAIR 01-1A-505-1 – Aircraft Electric and Electronic Wiring, Technical Manual. Knowledge of electrical bonding; EMI shielding and filtering techniques; RF testing methods, e.g. VSWR. Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13703
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 10/06/2017
Last Updated: 10/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Composite Aerospace and Defense

Description:
San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all platforms. Assemblies will include surface mount as well as through hole technology and mechanical assembly

Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.



Software Requirements:

Experience with SAP, Microsoft Office Project and Visio
Database knowledge in Oracle and FileMaker


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001
Knowledge of the requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)
Experience implementing capital equipment in factory environment.
Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Experience with programming and databases, e.g. Oracle and FileMaker. Knowledge of SQL.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred


Required Education: Bachelor's degree is required.



Position: Contract to Hire or Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95014
Job Location: San Diego, CA
Rate: 45-50/hr
Per Diem: yes
Overtime: yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 2nd Shift - Aerospace and Defense

Description:
San Diego, CA



A Manufacturing Engineer 2nd Shift is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)

Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings

Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that adheres to engineering process specifications

Generate Flat Pattern and Laser Projection files using FiberSIM

Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions

Provide support to manufacturing engineering on shop floor when needed



Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM is required


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
Working knowledge of composite part design and fabrication methods
Experience working in commercial and/or military aircraft manufacturing environments
Familiar with composite lamination drawings and process specifications
Previous hand layup experience with prepreg material is a plus


Required Education: Bachelor's degree is required.



Position: 2nd Shift, Contract to Hire or Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95012
Job Location: San Diego, CA
Rate: 45-50/hr
Per Diem: yes
Overtime: yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-There are two (2) Level II openings and two (2) Level III openings.

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills: Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) . -Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).

Keywords:
-Manufacturing Engineer
-Delmia Maestro
-Windchill
-Propulsion components

Keywords:
Education: BS degree in Manufacturing /Industrial Technology or Engineering

required Skills and Experience:

Required Skills:
MANUFACTURING ENGINEER
AEROSPACE

# of Positions: 4

Location:
Canoga Park, CA

Start Date: 10/23/2017
Estimated End Date: 04/22/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 10/04/2017
Last Updated: 10/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III - (PA) - Electrical/Electronics

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.
 
Job Number: MFGEeePA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/15/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Scheduler Sr

Description:
SUMMARY STATEMENT
Applies extensive knowledge of principles, theories, concepts and industry practices and standards in the area of developing comprehensive schedules required to manufacture aircraft and aerospace products. Essential Functions and Key Responsibilities: Develops solutions to a variety of complex problems requiring independent judgment and ingenuity to modify standards and procedures relative to developing comprehensive schedules required to manufacture aircraft and aerospace products including such items as raw materials, purchased parts, equipment, and other like items. Management applies general guidance related to resolution of complex problems and outcomes. Analyzes and defines the systems requirements and develops systems specifications and programming. Installs databases of pertinent information for use in creating a master schedule for product manufacturing. Reviews and evaluates engineering drawings and blueprints to estimate quantity and type of materials, parts, or other items required. Converts requirements to orders of conventional sizes and quantities, considering factors such as existing inventories, unavoidable waste, and kind of material to be used. Reviews material lists for conformance to company standard practices in regard to parts and materials used. Prepares or authorizes preparation of purchase requisitions. Schedules deliveries based on production forecasts, material substitutions, storage and handling facilities, and maintenance requirements. Estimates need to reorder supplies due to rejections and engineering changes during manufacturing cycle. Confers with purchasing, engineering, planning, and other personnel to exchange information regarding inventories, schedules, and related issues. This position may provide administrative and technical leadership over other Stakeholders in the department. Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Bachelor's degree (B. A.) from four-year college or university and six (6) or more years related experience and/or training; or equivalent combination of education and experience. Level of Supervision Required: The level of supervision required described here is representative of that which must be met by a Stakeholder to successfully perform the essential functions of this job. Works under limited direction. Guidance as to objectives, critical issues and policy. Exercises considerable latitude in determining objectives and methods. Communication and Special Skills: Communicate effectively using electronic media and in written and verbal forms. Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups. Competent in the use of standard software applications such as Microsoft Word and Excel. Special Training and Behavioral Competencies: The following training requirements and competencies must be met before acceding to this job. • Safety training applicable to the job and work area. • Complete the required Client University training for all Stakeholders. • Comply with the Client Group Leadership Competencies for Stakeholders. • Ability and willingness to assist and transfer technical knowledge to less experienced Stakeholders. Physical Requirements: The physical demands described here are representative of those that must be met by a Stakeholder to successfully perform the essential functions of this job. While performing the duties of this job, the stakeholder is regularly required to sit and talk and hear. The Stakeholder is occasionally required to stand and walk. The Stakeholder must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. Must be able to travel between facilities and operate standard office equipment. Work in excess of eight (8) hours per day and five (5) days per week as required. Must be able to ascend and descend stairs. Work Environment: The work environment characteristics described here are representative of those a Stakeholder encounters while performing the essential functions of this job. While performing the duties of this job, the stakeholder is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Mental Requirements: The mental characteristics described here are representative of those a Stakeholder encounters while performing the essential functions of this job. Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people.
 
Job Number: 17-792-13780
Job Location: Midwest
Rate: 70-75k
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handlers - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Material Handlers for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible for the distribution, tracking, handling and identifying of all inventory material supporting customer service center, European distribution center, and client dealer operations along with all other functions related to distribution center operations. Perform all inventory transactions in accordance to client policy and procedures in order to maintain a high level of inventory accuracy in the warehouse management system.

Job Duties:

• Inspect inbound material to verify item description, quantity and conformance standards
• Receive, put-away, pick and issue materials, equipment and other items from bin, stockroom, or warehouse locations
• Unpack or pack a wide variety of aircraft products and materials for put-away to stock and/or delivery
• Mark, label, measure and/or weigh cartons to ensure packing specifications for shipment are met
• Load and unload a wide variety of aircraft products and materials
• Move material within warehouse or from facility to facility
• May require the use of pallet jack, hand truck, forklift or motor vehicle
• Consistently perform all systematic transactions in the warehouse management system related to distribution center operations correctly
• Adhere to all procedures required for inventory storage and transactions
• Perform inventory cycle counts
• Support a team atmosphere that embraces client philosophy and the inclusion of associates’ ideas in order to enhance the performance of the warehouse operation

Education, Work Experience, Certification and/or Licensure:

• High School diploma
• Valid government issued driver’s license
• Able to be forklift certified
• Hold a current Driver’s License and can operate a standard vehicle to support parts movement operations
• Some overtime is required and flexibility in schedule depending on production demands
• Must be able to work any shift, to include nights and graveyard (3:30pm-12am, or 12am – 8:30am)
• Parts handling and inventory control background preferred
• Export Compliance / International Shipping experience preferred
• Inbound Quality inspection experience is preferred
• SAP experience is preferred
• Hazardous material handling and shipping experience is preferred
• Knowledge in aerospace parts a plus

Knowledge, Skills and Abilities:

• Ability to input, analyze and understand computer based WMS system transactions
• Proficient in Microsoft Office applications
• Strong communication skills
• Ability to use a hand scanner, bar code labeling and scale system effectively
• Ability to lift 50 lbs. without assistance

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38176
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
From the Hiring Manager:

*** Looking for a Mechanical Engineer who has prior hands-on mechanical design experience along with the working knowledge / understanding of the assembly / fabrication process
*** This position is an open-ended position (12+ months to perm) working on multiple contracts extended over the next 3 years (36 months).
*** SolidWorks is a must; should have Production / Manufacturing experience working for government customers (Defense, Military, etc) and not someone with all Aerospace experience
*** Although this position is labeled as a “contract position”, he’s looking for someone who wants to further their career and grow with an established industry leading company. You will be hired to work on several projects / prime contracts, which gives this position stability & job security for the next 3+ years.

Summary:

The Mechanical Engineer will assist in the creation of proposals for technical solutions to government customer solicitations by researching, brainstorming and developing new mechanical design solutions. The projects will require solutions that ensure functionality, quality, reliability, cost and manufacturing capability for a range of specifications. The Mechanical Engineer will create and maintain the project specifications and develop the design and other aspects of the project plan including schedule, resources and costs.

Responsibilities:

> Design and analyses of technical development projects, mechanical systems with multiple moving parts
> Defining project specs and project plans
> Working with manufacturing processes/systems and the ability to translate this knowledge into design direction for new designs and existing product improvements
> Independently create structural analyses of machinery and small scale architectural assemblies
> Work with structural analysis tools, both manual calculations and automated software approaches (FEAs)
> Work with weldments and/or welded structures
> Exhibit fluency in parts/assemblies
> Exhibit an understanding of, and experience with, MIL-STD-810 environmental requirements and resulting design issues
> Product validation and durability testing
> Initiate and lead cross functional team meetings and design reviews to complete mechanical design (concept through launch)
> Apply DFM/DFA principles to the mechanical design and creating multiple concepts, thoroughly evaluating each, and presenting them for design reviews by peers.

Requirements:

> Bachelors/Masters in Mechanical Engineering & 5–10+ years in mechanical project engineering experience
> Proficient in Solid Works, and ASME Y14.100
> Experience with R & D for government customers preferred

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 041_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 12/05/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer II - CA

Description:
Basic Qualifications:
• Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + 2 years relevant experience
• Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
o Use of block part libraries
o Generation of multilayer drawing packages, detailed assembly views, and schematics
• Demonstrated working knowledge of basic GD&T principles
• Sound working knowledge of Finite Element Analysis techniques and basic thermal analysis, preferably using Inventor Pro Suite Analysis package (including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
• Background in tooling design a plus


Essential Job Functions:
Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required.
Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
Work with Illuminations Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT.
Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs.
Provide support to tooling design team on an as needed basis.
Use Finite Element Analysis to support new design development and Root Cause investigations.

Knowledge Desired:
Candidate must be proficient and efficient in use of AutoCAD / Inventor Pro Suite 11 (or higher) in both 2D and 3D and have a sound working knowledge of basic GD&T principles.

Candidate must also have prior knowledge and experience in generating and running finite element analysis, preferably using Analysis package in AutoCAD / Inventor Pro Suite.

Ability to compile and present data using excel and powerpoint, and to generate/update procedural documentation using MS Word, a strong foundation in mechanical engineering and/or material science, as well as familiarity with basic physics of solar cells, Aerospace materials, and assembly techniques, PCBs and electronics are all considered as pluses.
Essential Physical/Mental Requirements:
Candidate must be highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs. Must have good people skills and be able to communicate effectively with a diverse group of both internal and external customers and colleagues.
Must be willing to embrace change and learn new skill sets as needed in order optimize processes and procedures and address balancing workloads in a dynamic market environment.
Special Requirements:
The ideal candidate should be flexible, able to support evening and weekend work on an as needed basis, and self-motivated. Must be adept at working in a fast paced environment to complete scheduled milestones as planned.

Bachelors degree in Mechanical Engineering, Material Science, Physics, or related field + 2 years relevant experience (or equivalent certification) in Computer Aided Design.

Experience Desired:
Must be proficient in:
• reading/generating electrical schematics
• quickly generating 2 and 3 D models using block part libraries
• use of multi-layer drawing structure
• generating assembly detail views

The ideal candidate must also have a demonstrated working knowledge of basic GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups, and have prior experience in generating/running finite element analysis models. Prior experience in use of Autodesk VAULT is highly desired.

Experience in packaging design and/or wiring assembly is also desirable.
 
Job Number: MechEngIICA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.

Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 7755
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 08/11/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist URGENT CA

Description:
160120/7326500
Canoga Park, CA
70/hr max
6 months

Model Based Systems Engineering (MBSE) Technical Specialist

Remaining Positions: 1

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.
Skills: Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
Education: -BS or MS in Engineering, Computer Science or related field is required.

-MS in Systems Engineering is desirable.



Skills: Required
• MBSE
• IBM RATIONAL SOFTWARE
• DOORS SOFTWARE

State/Province: California
City/Town: Canoga Park

Start Date: 09/04/2017 Hours Per Week: 40.00
Est. End Date: 03/04/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7326500
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 10/11/2017
Last Updated: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV / Propulsion with active secret FL

Description:
160411/7347566

Job Title: NX Mechanical Design Engineer IV / Propulsion

Number of Positions: 2
Remaining Positions: 2
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **

• Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design. This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts. Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
• Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
• Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
• Perform propulsion system to airframe and test article to test facility integration.
• Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
• Performs design calculations to validate design requirements.
• Provides data in support of contract data requirements list (CDRL) submittals.
• Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
• Participates as a member of a project team.
• Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
• Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
• Work is reviewed upon completion for adequacy in meeting objectives.
• Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.
Skills: • Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
• Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
• Prior propulsion to airframe and test facility integration experience desired.
• Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
• Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
• Position requires experience using CAD database management tools (WindChill preferred).
• Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
• Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
• Knowledge of manufacturing techniques and inspection requirements is a plus.
Education: Bachelor’s or Master’s degree in an appropriate discipline and nine years of related technical experience as engineering designer or equivalent combination of education and experience.

Skills: Required
• SIEMENS
• GEOMETRIC DIMENSIONING
• GEOMETRIC TOLERANCING
• AEROSPACE ENGINEERING
• WINDCHILL


State/Province: Florida
City/Town: Jupiter


Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 10/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7347566
Job Location: Jupiter, FL
Rate: 60/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations / General Manager

Description:
Lead all site efforts concerning operations, quality, engineering, customer support and business development
Partner with off-site leaders in IT, Finance, Human Resources and Facility Management to ensure business needs are met and manage local members of these teams cooperatively in a Matrix Organization.
As the leader of this growing business, continue efforts to further grow and improve profitability;
Work to develop and expand contacts at key strategic customers; lead and participate as required at industry trade shows and conferences.
Be the change agent to drive a strong culture of reducing operations and product costs through continuous improvement or 6 sigma methods;
Work in synergy with other MRO companies within the parent corporation;
Lead site budgeting efforts and adherence to approved financial plans in partnership with the finance director and corporate leaders.
Job Requirements

Requirements:

Requires a Bachelor’s Degree in Engineering, or a technical field. An MBA is a strong plus.
Essential to have at least ten years of experience in a leadership role within a FAA MRO Repair Station;
Experience with specialty welding processes, heat treat, complex machining and the development of FAA DER repairs;
Essential to have had operations management experience; must understand the general flow of MRO products through a typical shop from order receipt through invoicing;
A strong ability to assess and understand customer technical requirements, as well as understanding and providing value added alternative solutions;
Strong written, verbal and presentation communication skills; must be able to communicate with all levels Must have a great attitude that is welcomed by employees, customers and stakeholders that is business focused.
Good leadership skills and development of talent; We are looking for a roll up the sleeves leader that knows how to nurture and focus teams members while meeting customer and corporate expectations.
The successful candidate will maintain the highest professional ethics and integrity. Meeting corporate compliance and aerospace regulatory agency mandates are essential. He or she will have a strong intellectual capacity, superior analytical skills, professional judgment, and the ability to communicate at all levels of the company;
Demonstrated hands on manufacturing experience with continuous improvement or 6 sigma programs
Advanced MS Office computer skills (Word, Excel, PowerPoint) are a must. Experience with ERP systems and engineering CAD systems are a plus.
Due to ITAR restrictions, must be a US Person.
 
Job Location: CA
Duration: FULL TIME
Start Date: ASAP
Input Date: 10/25/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations / General Manager

Description:
Responsibilities:

Lead all site efforts concerning operations, quality, engineering, customer support and business development
Partner with off-site leaders in IT, Finance, Human Resources and Facility Management to ensure business needs are met and manage local members of these teams cooperatively in a Matrix Organization.
As the leader of this growing business, continue efforts to further grow and improve profitability;
Work to develop and expand contacts at key strategic customers; lead and participate as required at industry trade shows and conferences.
Be the change agent to drive a strong culture of reducing operations and product costs through continuous improvement or 6 sigma methods;
Work in synergy with other MRO companies within the parent corporation;
Lead site budgeting efforts and adherence to approved financial plans in partnership with the finance director and corporate leaders.
Job Requirements

Requirements:

Requires a Bachelor’s Degree in Engineering, or a technical field. An MBA is a strong plus.
Essential to have at least ten years of experience in a leadership role within a FAA MRO Repair Station;
Experience with specialty welding processes, heat treat, complex machining and the development of FAA DER repairs;
Essential to have had operations management experience; must understand the general flow of MRO products through a typical shop from order receipt through invoicing;
A strong ability to assess and understand customer technical requirements, as well as understanding and providing value added alternative solutions;
Strong written, verbal and presentation communication skills; must be able to communicate with all levels Must have a great attitude that is welcomed by employees, customers and stakeholders that is business focused.
Good leadership skills and development of talent; We are looking for a roll up the sleeves leader that knows how to nurture and focus teams members while meeting customer and corporate expectations.
The successful candidate will maintain the highest professional ethics and integrity. Meeting corporate compliance and aerospace regulatory agency mandates are essential. He or she will have a strong intellectual capacity, superior analytical skills, professional judgment, and the ability to communicate at all levels of the company;
Demonstrated hands on manufacturing experience with continuous improvement or 6 sigma programs
Advanced MS Office computer skills (Word, Excel, PowerPoint) are a must. Experience with ERP systems and engineering CAD systems are a plus.
Due to ITAR restrictions, must be a US Person.
 
Job Location: San Diego, CA
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Plant Engineer

Description:
The successful Powerplant Engineer (TSI) candidate should have aerospace experience and specific experience working with engine and engine subsystem installations.
Required experience also to include knowledge of:
• Airframe/Engine/Nacelle integration (Fire Protection)
• Certification plans
• Capability in managing engine suppliers and resolving technical issues
• Strong communication and organizational skills.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in specific technical discipline or 10 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv. degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Performs other duties as assigned.
• Advanced degree in engineering related field preferred.
 
Job Number: 24-201
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Plant Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
The successful Power Plant Engineer (TSI) candidate should have aerospace experience and specific experience working with engine and engine subsystem installations.
Required experience also to include knowledge of:
- Airframe/Engine/Nacelle integration (Fire Protection)
- Certification plans
- Capability in managing engine suppliers and resolving technical issues
- Strong communication and organizational skills.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7931
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 09/21/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Product Engineer

Location: Plymouth, MI
Duration: 6 months

Description:
Manager is currently seeking a Product Engineer with strong interest in product design and excellent communication skills to work on vehicle complete seat systems. The Engineer will support root cause identification, issue resolution and change management with the customer on the program. The Engineer will be the key liaison between the customer, Adient seating plant and other Tier 1 suppliers. Experience with armrests and head restraints a plus.

Requirements:
- Provide front-line customer technical interface for program/product. Develop and provide resolution to customer technical issues.
- Demonstrate the ability to plan, organize and deliver to program requirements.
- Must be able to balance multiple requirements from differing internal functional groups, Subject Matter Experts and the customer to find optimized technical solutions.
- Coordinate product design and drawing releases from mock up to final production.
- Execute robust designs considering manufacturing feasibility.
- Lead customer and supplier open issues meetings.
- Lead technical design reviews monthly.
- Update/ generate DFMEAs.
- Coordinate product validation and maintain DVP&R.

Qualifications:
- Bachelor's Degree required; Mechanical Engineering degree strongly preferred.
- 0 to 10 years prior experience working in the automotive industry.
- Strong analytical skills and work effectively with customers / suppliers and the development team.
- Strong communication skills.
- CAD, CATIA or Unigraphics experience a plus.
- Experience with PDfSS, FEA and GD&T desired.
- Prior experience with development process, plant exposure and program launch highly desired.

Conference Call Notes:
- Complete seat experience is great plus
- Will consider a candidate with Truck/Tractor/Aerospace industry Seating experience with good CAD, CATIA or Unigraphics experience.
- Bachelors' degree required.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-13699
Job Location: Plymouth, MI
Input Date: 10/05/2017
Last Updated: 10/09/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/11/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Quality Assurance Specialist Engineer

Canoga Park, CA
1 Year Contract
$50.00-54.00/Hr

1st Shift

Duties:

***Be available for 50% to 75% travel to White Sands Test Facility in New Mexico to support rocket engine testing for a week (or more) at a time***

** Candidates must be U.S. Citizens **



** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **


Candidate needs to be familiar with the following processes:

-Nonconformance generation and closure process

-Cause and corrective action process

-A general understanding of machining, blueprints, measurement tools and build records, GD&T

-A general understanding of what quality engineering does

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.


15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.


10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.


5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:

Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7964
Job Location: Canoga Park, CA
Rate: $50.00-54.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 09/26/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Candidate needs to be familiar with the following processes:

-Nonconformance generation and closure process

-Cause and corrective action process

-A general understanding of machining, blueprints, measurement tools and build records, GD&T

-A general understanding of what quality engineering does

-Be available for 50% to 75% travel to White Sands Test Facility in New Mexico to support rocket engine testing for a week (or more) at a time

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.



15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.



10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.



5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7450276
Job Location: Canoga Park, CA
Rate: DOE
Duration: 6 months
Start Date: ASAP
Input Date: 09/26/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Quality Assurance Specialist Engineer

Canoga Park, CA
1 Year Contract
$50.00-54.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.

20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.

15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.

10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.

5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7880
Job Location: Canoga Park, CA
Rate: 50.00-54.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 09/11/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer / NDT / 6 openings! CA

Description:
160315/7337172

Job Title: Quality Assurance Specialist Engineer
Rate 54/hr max

Number of Positions: 6

Remaining Positions: 6

Duties:
** Candidates must be U.S. Citizens **



** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **





This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.



Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.



15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.



10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.



5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.
Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.


Skills:
Required

QUALITY ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 09/25/2017 Hours Per Week: 40.00
Est. End Date: 09/25/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337172
Job Location: Canoga Park, CA
Rate: 54/hr max
Duration: 12 month contract
Input Date: 11/13/2017
Last Updated: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com