Job Search Results

621 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/12 Tuesday 09:16PM Pacific Time by ContractJobHunter. )

Listings 1 - 621

Go To My Job Tracker

Expand all descriptions

Structural Design Engineer - CPD Or Fibersim Experience Needed

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: MoJave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/24/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 10/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

APG Mechanic
(U.S. Citizenship Required*)
Greenville, SC
2019-9830

Responsibilities:
• Perform a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualification:
• This position supports a 9/80 A- 1st work schedule.
• Engine and Propeller Rigging exp desired
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• 8 years P3 Orion experience desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9830
Job Location: Greenville, SC
Input Date: 10/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 09/23/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Engine and Propeller Rigging URGENT SC

Description:
166498 Job Title: APG Mechanic
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Start Date: 10/21/2019
End Date: 12/31/2019
Position Type: Contract

Job Summary:
This role has 3 open positions that the hiring manager is very eager to fill. Please send qualified candidates ASAP.

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging exp desired

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years



Qty 3 positions required
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 months +
Input Date: 10/15/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JEG -1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 09/23/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.
 
Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/09/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.



The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineer

Description:
The Airframe Process Engineer is required for 1st, or split shift (1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include:
• Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.
• Reviewing, signing off, creating and implementing PCAS for EC changes,
• Issuing SAP notifications to create new tooling
• Performing process validations.

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.

This position reports to Process Engineering Black Hawk Lead

This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment. Good communication skills are required.

Requirements:
• 5+ years of Airframe Process Engineering
• Proficiency in all processes associated with Airframe Process Engineering.
• Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP
• Candidate must be flexible in regard to work schedule and willing to support weekends.
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
 
Job Number: 1910107005
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 10/09/2019
Last Updated: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Airframe Process Engineer

Description:
PDS Tech is seeking an Airframe Process Engineer in Bridgeport CT
 
The Airframe Process Engineer is required for 1st, or split shift (1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.
 
The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.
 
Primary responsibilities include:
  • Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.
  • Reviewing, signing off, creating and implementing PCAS for EC changes,
  • Issuing SAP notifications to create new tooling
  • Performing process validations.
     

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.



This position reports to Process Engineering Black Hawk Lead



This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment. Good communication skills are required.





 
Requirements:
  • 5+ years of Airframe Process Engineering
  • Proficiency in all processes associated with Airframe Process Engineering.
  • Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP
  • Candidate must be flexible in regard to work schedule and willing to support weekends.
  • BS in Mechanical Engineering, Aerospace or Manufacturing Engineering

 
 
 
 
Job Number: 1910107005
Job Location: Bridgeport, CT
Duration: 15 months
Input Date: 09/30/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fKl2QAE&URLSource=cjhunter

Applications Engineer

Description:




Applications Engineer



Location: Saginaw, Michigan



SCHEDULE
:

7:00 AM – 4:00PM 



SUPERVISOR:

Engineering Manager

Summary

 The Applications Engineer will be accountable to evaluate customer requests and site drawings, to ensure fit and function of our product. An application engineer will provide in-depth technical knowledge for all of our products in pre-sales and post-sales roles. You will provide sales drawings in Solid Edge Works and provide review of specifications specs to support the sales estimating and bidding processes. You will be a part of the product team and oversee equipment designs for fit and function. You will collaborate with R&D when new products are to be transferred in to production to ensure that our standards are kept and captured for reference. As a subject matter expert (SME) you will be a resource to the designers to transfer your knowledge in a way that will forward their ability to handle jobs accurately and efficiently. You will communicate with our customers and manufacture's representatives to ensure that we have whole and complete information. While communicating with outside sources, you will represent our company in a positive light only disclosing product and company data as appropriate for sales. You may be called upon to train our personnel as needed. Occasional travel, (up to 20%), may be required to visit sites, measure and ensure a fit for the customer and DC. You will be accountable to meet the product group standards, as assigned by the Engineering Manager. 



Essential Functions:

  • Listen to the needs of our customers and apply the correct equipment that will meet their needs.

  • Understanding of Wastewater, Storm water processes and various industrial processes.

  • Accountable for timely, detailed review of customer specifications to accurately support sales in bidding projects. Applying our application protocols, while assessing the needs of the project and coordinating information with other subject matter experts internally.

  • Exceptional customer service through professional, timely and accurate design support, communications etc.

  • Ensure our design standards are kept in tact through all phases of our projects.

  • As a subject matter expert (SME) you will be required to problem solve, learn new concepts and contribute sound application engineering to the company's products and processes.

  • Sales drawings turned around in 2-5 days (as required to support Sales), all drawings are to be delivered on time, consistent to DC standards, within budgeted hours and customer requirements.

  • Attend handoff meetings at receipt of PO and release to engineering; must support project application prior to submittal release as required to meet customer/DC Schedules.

  • Capture lessons learned with the product team, assess and implement changes/updates as needed into the application process and integrate this knowledge in to sales project management processes.

  •  Applications Engineer will ensure accuracy of engineering protocols, documented procedures.

  • Shall have in-depth knowledge of pricing, labor, alternative materials, marketing objectives & sales process.

  • Will follow all standards/processes as designated by company's QC, ERP and other process controls.

  •  Accountable for whole and complete product (fit and function) from proposal to post-sales.

  •  Due to the amount of interactions between customers and our internal teams; this position requires you to work in the office environment.




Education:



Bachelor Degree preffered  but not required.



College degree in Mechanical Engineering, Engineering Technology or Architectural Technology is strongly preferred or equivalent experience considered. .



Experience Required:


  • Required: Engineering of mechanical equipment 3 years or Architectural/Construction engineering 8 years 

  • Required: Computer Experience & Proficiency: MS Office programs, such as Outlook, Word and Excel


Required:


  • Proficiency in Solid Works or Solid Edge along, able to understand and translate mechanical blueprints.

  • Exposure to machinery design and mechanical concepts. Proven experience in resolving mechanical engineering production issues for equipment.


 Skills:


  •  Able to understand and create drawings (mechanical and civil) to industry standards.

  • Meticulous attention to detail, able to multi-task well and complete projects on time, within budget, to the customer's satisfaction.

  • Must have excellent customer and people skills: should be able to represent the company's image (consistent with the business motto of "you'll like working with us!”)

  • Must be self-initiating, independent, and able to organize time and diverse responsibilities.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33344
Job Location: Saginaw, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-12 00:00:00.0
Input Date: 08/12/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Assembler / soldering / surface mount / IPC-610 or IPC J-STD-001 Certification - 2nd Shift - no clearance FL

Description:
166759 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2259-1
Max Pay Rate: $20/hr
Start Date: 10/22/2019
End Date: 10/22/2020
Position Type: Contract / 2nd Shift
Qty 8 positions


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
• Must have a minimum of 3 years of experience as a SMT touch up or rework assembler and have above average surface mount and fine pitch soldering skills.
• Ability to hand solder components using soldering station
• Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids, insufficient solder, solder shorts, solder bridges, misaligned parts or leads, tombstoned and or billboarded components and any other solder defects that may occur during the SMT operation.
• Able to read instructions, identify standard SMT components and interpret assembly drawings.
• Able to work in a fast-paced environment where some overtime may be required.
• Able to sit for long periods of time and focus on tedious tasks.
• Strong communication and organizational skills and ability to work in a team oriented environment
• Experience working in a LEAN Manufacturing environment.
• Have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• IPC-610 or IPC J-STD-001 Certification

Required Skills
Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills J-STD-001 Yes 1 2 - 4 Years
Technical Skills Soldering Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years
 
Job Number: LMRMS-2259-1
Job Location: Oldsmar, FL
Rate: 20/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/01/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Assembler D

Description:
Chipton-Ross is seeking 41 Assembler D's for openings in San Antonio, TX.

RESPONSIBILITIES:
Performs advanced, specialized or prototype production assembly operations on structural parts, mechanical assemblies and subassemblies using automated assembly operations. May provide assembly operation guidance to other assemblers.

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 5:00 AM - 2:30 PM

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

 
Job Number: 181518
Job Location: San Antonio, TX
Rate: $DOE
Duration: 7 Months
Input Date: 09/06/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 04/04/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Assembly Mechanic

Description:
PDS Tech is seeking an Assembly Mechanic in Arlington, TX
  • Constructs, maintains, and tests mechanical equipment, machinery, and components.
  • Identifies parts for replacement and machines that need new parts and places orders as necessary.

Requires a high school diploma or its equivalent. 
May be required to complete an apprenticeship and/or formal training in area of specialty. May require 6-8 years of experience in the field or in a related area. 
 
Job Number: 1910100973
Job Location: Arlington, TX
Duration: 6 months
Input Date: 05/01/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dTLQAY&URLSource=cjhunter

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

Description:
165856
Avionic Technician
Greenville,SC 29605
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


Qty 3 openings
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG -1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 09/26/2019
Last Updated: 10/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 11/12/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician / Avionics modification experience / URGENT URGENT SC

Description:
166011 Job Title: Avionics Technician

Work Site Address: Greenville, SC 29605
Job Number: 1968-1
Max Pay Rate: $29.00/hr
Start Date: 9/2/2019
End Date: 12/19/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qty 3 positions needed
The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

Areas of Expertise P-3 No 3 4 - 6 Years
Technical Skills Electrical Testing No 2 4 - 6 Years
Technical Skills Read Electrical Schematics No 1 4 - 6 Years
 
Job Number: JEG -1968-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 09/30/2019
Last Updated: 10/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Business Manager - Engineering Services

Description:
Job Title:      Business Manager Engineering Services
Location:      Seattle, WA
Salary:           Base + Commission
Job Type:      Full Time w/ benefits
 
  

PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.
 
Description/Tasks
Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
The candidate should have capacity to:

  • Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
  • Develop customer relationships
  • Steering call for tender, financial proposal, team selection.
  • Management of resources working on projects
  • Steering project and deliveries.
  • Being target and results oriented
  • Start date:  ASAP.

Qualification/Experience
  • At least 2 years’ experience in aeronautics, in Engineering or Sales.
  • Minimum of Engineering Bachelor’s degree or similar from an accredited university.
  • Excellent presentation and communication skills are required.
  • Dynamic, hard-worker and passionate for technologies
  • Availability for business trip/travel in different states.
  • Home base: Seattle area.


More information on AKKA Technologies Group can be found on www.akka-technologies.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.




 
 
 
Job Number: 1910106765
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/24/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.



Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools



Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 10/03/2019
Last Updated: 11/04/2019
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Email: alvin.adeva@ingeniumtech.com
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Inspector

Description:
Great opportunities in Tempe 2nd & 3rd shift for CMM Inspectors - no programming.  Semi-conductor or Aerospace experience is preferred.

Performs mechanical inspections of products to determine conformance to the customer's Engineering prints and specifications, utilizing standard mechanical instruments, CMM's, functional gauges, test fixtures, and electronic diagnostic instruments for variable data collection. Follows Manufacturing plans and inspection procedures to report product status accurately, record "turn backs” for resolution, and identify nonconforming material to be properly documented and segregated. Prepare and use standard documentation for reporting variable test data, SPC, and detailed inspection plans for the purpose of recording measurement results. Be able to exhibit an accuracy in judgment for ascertaining critical components and possess administrative qualities for document collection. Perform process/product audits, over-checks for product validation, and review product history for trends and analysis.



Knowledge and Abilities:



Skill-set required to conduct receiving inspections using standard mechanical, and electrical instruments, functional gauges, test fixtures and utilizing CMM's with existing Part Programs. Additionally have good basic math aptitude and organizational skills. Ability to read engineering drawings interpreting GDT per Ansi Y14.5, technical specifications, product certifications, manufacturing planning, and inspection procedures. Ability to interpret SPC plans and results, analyze SPC data for Manufacturing Improvements, understand and perform Gage R&R studies. Report product status accurately, record "turn-backs” for resolution, analyze product history for trends and identify nonconforming material to be properly documented and segregated using Computer software. Prepare and use standard documentation for reporting and detailed inspection plans for the purpose of recording measurement results on Computer software . Perform process / product audits, over-checks for product validation, and review product history for trends and analysis. Inspector is expected to have a comprehensive understanding of appropriate workmanship standards and be able to use sampling plans to establish product acceptance in line with the customer's specifications. Possess a fundamental knowledge of manufacturing processes, familiarity and knowledge of machining, and a basic understanding of special processes (i.e heat treatment, plating, welding, etc.).



Education and Experience:



High School Diploma or GED required. Must have a minimum of 3-5 years inspection experience in a manufacturing environment. Preference to have mechanical experience with semi-conductor products and/or aerospace products and assemblies.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-40318
Job Location: Phoenix, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-09-27 00:00:00.0
Input Date: 09/27/2019
Last Updated: 10/31/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Cable Technician

Description:
Chipton-Ross is seeking a Cable Technician for an opening in Rancho Bernardo, CA.

RESPONSIBILITIES:
" Assemble and build equipment used for military, aerospace, and commercial products.
" Build various cables that meet IPC620 Class 3 requirements.
" Follow methods and sequences of operations in performing tasks such as wiring, component installation, hand soldering, and cable harnessing on units.
" Assists in set up and conducts semi-routine tests such as continuity testing.
" Records and summarizes data
" Label assemblies in accordance with drawing specifications.
" Soldering-tinning wire, splices (lap/hook), and connections.
" Sets up and checks out semi-routine tests according to pre-arranged procedures; records data.
" Performs complex but repetitive tasks in preparation for electronic and/or mechanical assembly.
" Willing to grow and maintain positive attitude.
" Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
" Expected to work in a safe manner in accordance with established operating procedures and practices.
" Performs housekeeping and cleanup duties as required.
" Performs other duties as assigned or required.

REQUIRED EXPERIENCE:
-Must be able to work with common hand tools and operate equipment.
-Must have the capability to perform complex assignments with little or no direction.
-Must be able to obtain measurements from tools such as measuring tapes, scales, etc.
-Must be able to to crimp terminals/contacts onto wires using manual and automated tooling.
-Knowledge of computer operations and applications relevant to the position is required.
-Must be familiar with and able to use basic hand tools, cutters, wire strippers, hand crimpers, scissors, soldering iron and heat gun.
-Ability to comprehend complex drawings and or written instructions.
-The ability to work independently or in a team environment is essential, as is the ability to work extended hours as required.

PREFERRED EXPERIENCE:
-Prior military experience as an ET (Electronics Technician), AT (Aviation Electronics Technician) or AE (Aviation Electronics Mate) with Electronics Technician Maintenance School (ETMS) is highly desired.
-Certification in IPC610, IPC620, and J-standard is a plus.
-Experience in material potting is a plus.
-Experience soldering cables and wires is desired.

EDUCATION:
Accredited Associate's degree or equivalent with two or more years of experience. May substitute equivalent experience in lieu of education.

WORK HOURS:
M-F 6:00am-2:30pm
Full-Time

 
Job Number: 181982
Job Location: Rancho Bernardo, CA
Rate: $DOE
Duration: 6 Months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Combat Vehicle Mechanic

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.
Combat Vehicle Mechanic
(U.S. Citizenship Required*)
Sumner, WA
2019-9660

Responsibilities:
• Provide a broad spectrum of services dependent upon the organization they support.
• To ensure the flexibility to meet customer requirements, must be capable of performing a variety of tasks including scheduled and unscheduled maintenance, troubleshooting, repair and retrofit (improve invulnerability and survivability) on the Army’s Stryker family of vehicles (FOVs) components pursuant to applicable contracts within the organization.
• Repair of Driveline components including Differentials, Wheel Drives / Steer Wheels, Transfer cases and other related components.
• Scheduled maintenance: Periodic and preventative manufacturer (in accordance with the IETM) required maintenance to extend the life of the vehicle and/or performing upgrades as mandated during a designated period of time by customer.
• Unscheduled maintenance: The emergent, corrective or restorative maintenance requirements not previously planned or programmed but require prompt attention and must be added to, integrated with, or substituted for previously scheduled workloads.
• Troubleshooting: Systematically identifying issues and problems within the complex mechanical systems, electronics, computers and software systems within the Stryker family of vehicles.
• Meet safety requirements with OSHA, ANSI and ASME industrial standards, compliance and technical training, administrative duties to meet contract obligations and organizational requirements, adhering to Federal Acquisition Regulation (FAR) compliance.
• Other duties as may be required / assigned.

Qualifications:
• The ability to use calibrated measuring equipment such as micrometers, height and depth gauges and other associated tooling.
• Work in improved and unimproved maintenance facilities as well as field environment.
• Ability to work independently with minimal supervision and organize/prioritize multiple tasks.
• Must be able to foster and enhance teaming environment.
• Working knowledge with Microsoft Office software including Word, Excel, PowerPoint, Access and Lotus Notes preferred.
• Proven ability to perform multiple tasks within multiple work stations.
• Demonstrated good housekeeping skills and ability to convey such practices to team members.
• Ability to work extensive extended hours in a fast paced, challenging, high pressure environment.
• Ability to be issued and maintain company AMEX card
• Ability to deploy and meet requirements where and when needed to support
• fielding missions.
• CONUS and OCONUS as required
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma combined with 3-5 years mechanic experience maintenance on tactical/combat vehicles preferred (- 91B, 91S, 63S, 63W or 63B MCM or USMC MOS' 2147, 3521, 3522, 3524) Experience on Stryker, LAV 2.5 or LAV III desirable.
• Documented commercial training and/or experience acceptable in lieu of military vehicle experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9660
Job Location: Sumner, WA
Input Date: 10/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer

Description:
Citizenship Requirement: US Persons



Job Summary

The Components Engineer is responsible for robust manufacturing process selection, implementation and control of products, and reporting status of the assigned products to meet stakeholder requirements.



Job Responsibilities

• Responsible for the manufacturing process, procedures and production layouts, processing machining and material handling.
• Responsible for APQP (Advanced Product Quality Planning) implementation within product family
• Strong understanding of the following standards with ability to ensure compliance to customer requirements.
o AS9100 – Aviation, Space, and Defense Quality Management Systems Requirements
o AS9145 – Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP)
o AS9102 – First Article Inspection (FAI)
o AS9103 – Variation Management of Key Characteristics
o AS13000 – Problem Solving (8D)
o AS13003 – Measurement Systems Analysis (MSA)
o AS13004 – Process Failure Modes & Effects Analysis (PFMEA) and Control Plans
o AS13006 – Process Control Methods (including Statistical Process Control (SPC))
• Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance to reach business case hours and cost.
• Responsible for building inspection and test requirements into the production plan.
• Selects tools to verify their efficiency and performs root cause investigations, initiates corrective action of problems and deficiencies to ensure product quality, and report non-conformances to customer.
• Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
• Ensures processes and procedures are in compliance with regulations.
• Acts as technical expert for the assigned product, both internally and externally to suppliers and customer.
• Provides engineering estimates for business cases for similar product / product families.
• Responsible for the in process modelling (using Siemens NX).
• Responsible for the operation sequence list and operation sheets for the assigned products.
• Performs other duties, tasks and responsibilities as assigned.

Required Qualifications:
• Bachelor’s Degree in Manufacturing/Mechanical Engineering / related field, or in lieu of a degree 6+ years of experience in Manufacturing and Engineering industry will be considered.
• 4+ years Knowledge of NC programming and machining methods.
• 4+ years of experience with CAD software, NX Unigraphics preferred.
• U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements.

Preferred Qualifications:
• Six Sigma Black Belt or Lean Training Preferred.
• Aerospace environment preferred.
• Able to demonstrate the ability to work, and deliver, under own initiative.



Please send resumes to Becky Norman at bnorman@butler.com.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57877
Job Location: Manchester, CT
Rate: TBD
Per Diem: possible
Overtime: possible
Duration: 6+ months
Start Date: ASAP
Input Date: 10/01/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Location: San Clemente, CA

12+ months

Please contact Laura Leszek at 765-427-4721 if interested!

Job Description:

Seeking mid and senior level Design Engineers to perform mechanical design and drafting tasks including composite part designs.  Qualifications include:

•             Experience with surfacing, solid modeling, and drafting

•             CAD Software: Experience with 3D Experience/CATIA V6.  Strong CATIA V5 users considered.

•             Experience using Composites workbench (i.e. CPD for CATIA V5 or 3Dx equivalent)

•             Primary / Secondary Structural Design experience including sheet metal, machined and composite parts

•             Prior Lockheed or Sikorsky experience a preferred

•             Composite Tooling (molds, trim tools) design preferred

•             Experience with GD&T preferred

•             Aerospace experience preferred

•             Experience with additional CAD programs (UG NX, PTC CREO, SolidWorks) a plus



Min years of experience:  preferred 3 yrs minimum including experience with composites design

Degree Requirements:  BS in Engineering or Engineering Technology



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57875
Job Location: San Clemente, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/11/2019
Last Updated: 10/18/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Aircraft Interiors Design Engineer

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 8+ years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: IN
Rate: $57/Hr.
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Checker

Description:
Major purpose:

Responsibilities

• Plan, layout and revise detailed electrical parts, assemblies, and installation engineering drawings from basic layouts, established references, and standard data such as structures, devices, mechanics, electrical, or electronics

• Utilize computer-aided design equipment and/or graphic tools such as, AutoCAD and SolidWorks

• Complete details of major layout drawings prepared by others in accordance with standard engineering drafting practices

• Prepare specifications for parts lists, assemblies, and installations

• Prepare complete production detail drawings

• Contribute design modifications to improve quality of product or facilitate manufacturing operations

• Checking of electrical and mechanical drawings



Requirements:

• Associate's Degree or equivalent experience

• A minimum of 7 years recent relevant experience

• Experience with AutoCAD and/or SolidWorks

• Possess skills to prioritize assignments and flexibility to adjust to highest priorities depending on the program needs

• Must be familiar with Mil Std 100 / 1000 and MIL 31000T, ANSI Y14 drawings standards and aerospace documentation practices



Strongly preferred skills:

• Experience in Model Based Design

• Working with additive manufacturing techniques

• Experience with documentation of designs for additive manufacturing

• Checking experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-33462
Job Location: Arlington, TX
Rate: 37.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-28 00:00:00.0
Start Date: 2019-08-26 00:00:00.0
Input Date: 08/21/2019
Last Updated: 10/10/2019
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

Documentation Control Associate III

Description:
Creates and/or improves existing documentation procedures, and streamline across various product teams. Establishes and maintains consistency of databases and documentation as well as corporate processes used to ensure quality, design requirements, and environmental compliance. Manages and maintains as well as analyzes and interprets the consistency for all documentation and support systems to ensure quality. Follows established procedures and formats, researches and compiles technical data for use in routine documents or sections of documents such as manuals, procedures and specifications. Obtains data and information from review of documentation, drawings, schematics and reports, consultation with technical staff members.  Typically requires  5-7 years of experience.  Provides more technical/functional support than administrative support. Demonstrates a thorough working knowledge of technology, applications, terminology, and procedures required of job function. Performs varied and more complex tasks. Makes decisions within broad parameters.

SCOPE OF WORK

This position serves as a resource on the Project Management team and provides administrative and technical support for large capital projects managed by Our Client's PMT team. Experience with project management and collaboration systems is preferred.

Our Client' project management systems include:

•             SAP and SharePoint primarily; experience with these systems are preferred but not required.
•             Must have a functional understanding of electronic data management.
•             Functional understanding of project execution and phase gates is preferred.
•             Experience working on Alaska or other arctic projects is preferred.
•             Project support involves multiple tasks that are schedule driven. Strong organizational and communications skills are  critical to effectively supporting our clients. This position supports a wide area network of resources assigned to Our Clients projects.
•             Strong interpersonal skills are necessary to respond to various project support requests.
•             Training is provided on Our Clients project management systems. Experience with other project management systems is preferred.         

CategoryNameRequiredImportanceLevelLast UsedExperience 
CertificationsASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code for Materials (BPVC-II)Yes5     
EducationBachelor's Degree in Mechanical EngineeringYes2     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Piping CodesYes1     
GeneralOil and Gas IndustryYes3     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel (BPV) CodesNo5     
GeneralKnowledge of Heavy Industrial Manufacturing OperationsNo5     
SoftwareMS OfficeYes4     

Additional Competencies:• Knowledge of CPAI criteria and specifications
• Knowledge of ASME piping codes B31.3, 31.4, and 31.8 
• Knowledge of API piping inspection and repair (570)
• Familiarity with DOT, ADEC, and SPCC regulations
• Capable of performing pipe stress and flexibility analyses (preferably using AutoPIPE software)
• Good written and oral communication skills

 
Job Number: 1910104590
Job Location: Anchorage, Ak
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUAeQAO&URLSource=cjhunter

DrivMatic Operator

Description:
Drivmatic, Riveting, Assembly, Manual

RESPONSIBILITIES:
" Performs a variety of DrivMatic, riveting and structural assembly operations
" Performs structural assembly, riveting and inspection operations of major components and assemblies
" Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
" Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
" Adheres to all applicable safety and operational procedures and directives
" Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
" Keeps work areas clean and orderly
" May be required to perform other duties as needed

REQUIRED EXPERIENCE:
" Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
" Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
" Structural assembly, riveting and inspection operations of major components preferred
" Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 179646
Job Location: Stuart, FL
Rate: $20 to $25.00 DOE
Duration: 6+ Months
Input Date: 06/03/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/28/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electric System Component Outfitting Interface Engineer

Description:
This position is located in Nagoya, Japan.

Electric system component outfitting interface engineer
  • Mechanical/ structural interface engineering expertise
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044922
Job Location: Nagoya,
Duration: 36 months
Input Date: 07/19/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Keith Zingler
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000037FjAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Education / Experience:

- A bachelor’s degree in electrical engineering or electronics engineering from an accredited institution
- This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee


Position Criteria:
- Experience in analog and circuit design (digital is a plus), which includes ADC and DAC circuits design, DC – DC converter power supply design, constant current source design, FPGAs.
- Experience with LED drive circuitry, Pulse Width Modulation (PWM) dimming, signal conditioning
- Hands on experience in bench top prototype circuit verification, PCB layout verification, familiar with electrical and electronics test equipment.
- Experience with Cadence/Allegro OrCAD Schematic Capture, PCB Designer, LTSpice is a must
- Proficient in trouble shooting of circuit and system failures, EMI test failures, etc.
- Knowledge of PDM system (Enovia) for documentation control and workflow is desired
- Experience with stress analysis and component parts derating.
- EMI expert
- DO-160G experienced
- Test procedure redaction
- PCB design for build to spec
- FPGA electronic experienced
- D0-254 certification experienced
- Test witness able to troubleshoot on-site
- Validation & Verification of electro-mechanical system

Preferred Qualification
- Experience with DO-160
- Experience with DO-254
- Experience with DFMA, DFSS and DOE.
 
Job Location: Grand Prairie, TX
Rate: 73/hr
Input Date: 10/01/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electrical Engineer

Description:
We have a great opportunity for Electrical Engineer in Saginaw, Michigan

 

This is six-twelve month contract with Direct hire possible after six months.

Consultants assigned to the Company must be degreed [minimum of a Bachelor of Science in Electrical Engineering, Masters a plus] electrical engineers with expertise in actuator systems, including but not limited to, solenoids, linear or brushed motors.

Consultants assigned to the Company must sign the Undertaking referenced in Section 9 of the Non-Disclosure Agreement prior to starting employment.

 

Duties:

 

  • Support the Company’s Sr. Electrical Product Engineer’s current project with a potential Customer; 

  • Must have an in-depth understanding of how solenoids and linear motors are designed and the optimal processes for manufacturing these components;

  • Create a statement of requirements for the supplier; 




  • Define and oversee the design validation of electrical components; 




  • Help to define assembly level test requirements for function and quality 




  • Assist with the evaluation of each suppliers’ design and manufacturing proposal 

  • Will be in direct communications with Suppliers and be able to communicate technical information with a clear understanding. 

  • Launch experience is a plus. 

  • Mechanical electrical background a plus.


 

 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33545
Job Location: Saginaw, MI
Rate: 100000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-08-13 00:00:00.0
Input Date: 08/13/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electrical Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
1) AutoCad required, Catia V5 and CHS preferred.
2) GV,GVI, electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374101
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 11/12/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Role Summary/Purpose
The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

Essential Responsibilities
In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

In addition, as a Systems Engineer, you will:

• Design Power Systems Architectures in co-operation with aircraft manufacturers
• Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements
• Derive system interfaces
• Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements
• Perform system analysis, safety analysis, modeling, and simulation
• Develop the systems test environment
• Development system test plans and procedures and get their approval with the customer
• Work on developing and releasing test reports to customers
• Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program
• Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals
• Maintain scope baseline
• Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations
• Document the results of analyses and studies in technical reports
• Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
• Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures
• Support technical and program reviews

Qualifications/Requirements

• Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering
• Experience in requirements development, verification and validation
• Experience in system engineering and project management/planning
• Knowledge of aircraft power distribution and generation
• Clear thinking and diligent approach
• Strong interpersonal and communication skills

Desired Characteristics

• Knowledge of electrical power systems technical requirements, certification requirements
• Experience/ knowledge of the development lifecycle phases
• Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs
• Good written and verbal communication skills.
• Proven ability to contribute in a team environment
• Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard
• System mindset and problem solver
 
Job Number: 35475
Job Location: Dayton, OH
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Electro-Mechanical Designer (CREO Cabling)

Description:
PDS Tech is seeking an Electro-Mechanical Designer in Florence SC.
 
The candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.  May include utilization of computer aided design applications.
 

 
QUALIFICATIONS/EXPERIENCE
Preferred Experience Requirements:
  • 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in electromechanical designs.
  • Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
  • Ability to apply GD&T to parts and assemblies per design requirements.
  • Ability to perform tolerance analysis calculations.

 
Regular Experience Requirements:

  • Strong communications skills.
  • Ability to work effectively within a team environment.
  • High energy and passion for innovation and creativity.
  • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).

 
 
 
Job Number: 1910101762
Job Location: Florence, SC
Duration: 24 months
Input Date: 05/09/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fxwQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Designer (CREO Cabling)

Description:
The candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. May include utilization of computer aided design applications.

QUALIFICATIONS/EXPERIENCE
Preferred Experience Requirements:
• 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in electromechanical designs.
• Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
• Ability to apply GD&T to parts and assemblies per design requirements.
• Ability to perform tolerance analysis calculations.

Regular Experience Requirements:
• Strong communications skills.
• Ability to work effectively within a team environment.
• High energy and passion for innovation and creativity.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
 
Job Number: 1910101762
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/12/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Burlington, NJ

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

This is a day shift position. All candidates must be available to work one weekend day.



Position Summary

 

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required. 

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


 

Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience. 

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Must be able to lift 50 pounds on regular basis unassisted

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • This is a day shift position. All candidates must be available to work one weekend day.


 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-33238
Job Location: Burlington, NJ
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 08/12/2019
Last Updated: 10/10/2019
Firm Name: NESCO RESOURCE
Attention: Nora Sapone
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electromechanical Service Technician- Harrisonville, MO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a particular client site.

Position Summary



 


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

 

Core Duties and Responsibilities


 


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 



Candidates must be open to shift, overtime, weekends and holidays.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



  •  



 
Job Number: 19-32817
Job Location: Harrisonville, MO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 08/08/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electromechanical Service Technician- Stapleton, CO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Candidates must be open to working any shift, holidays, weekends and overtime. Specific schedule is to be determined; however, there is a possibility for 1st shift hours.

Position Summary


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

Core Duties and Responsibilities 




  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-27729
Job Location: Denver, CO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-24 00:00:00.0
Start Date: 2019-07-22 00:00:00.0
Input Date: 07/08/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electronic Systems Design & Analysis Engineer 3

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 11/12/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer

Description:
Contract-to-hire opportunity located in E. Aurora NY.

Electronics Packaging Engineer
Essential job functions: This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Required Education: BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 6198
Job Location: East Aurora, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 10/03/2019
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manager

Description:
Position Summary

Nesco Resource in conjunction with a long standing client of ours in Phoenix has an exciting career opportunity in its Engineering organization. We are seeking a dynamic individual to play an integral role in developing, driving and supporting our business goals. The right candidate should have a proven track record of providing leadership and expertise in the application of engineering activities. If you are a talented, self-motivated individual that enjoys a fast-paced environment, and can focus individual and team energies to deliver results, you may be an excellent candidate to join our team.



Accountabilities

  • Plan, organize, and direct the activities of the engineering staff ensuring they provide the necessary technical support to manufacturing and quality to achieve division objectives.

  • Ensure that all manufacturing special processes and tooling conform to customer, organizational, and governmental standards.

  • Direct the development of new manufacturing processes and the revision of existing processes to facilitate the improved manufacturing of parts.

  • Develop, coach and mentor team of engineers to ensure the highest level of performance and standards of excellence.

  • Manages software control

  • Provide evaluation and disposition of discrepant material


Essential Skills and Experience

To perform the job successfully, an individual should demonstrate the following competencies:


  • BS in Mechanical Engineering

  • MS in Engineering or MBA preferred

  • Minimum of 5 years of engineering management experience; prefer that experience in the aerospace industry

  • Minimum 5 years of leadership experience

  • Familiarity with specifications, blueprints and requirements for aerospace component manufacturing that includes having knowledge of aerospace welding, coatings, heat treatment, machining and sheet metal fabrications

  • Documented formal process improvement experience; Six Sigma Green Belt preferred

  • Knowledge of CNC turning and milling

  • Experience managing maintenance in a TPM/Preventative Maintenance environment

  • Works well with people; good verbal and written communication skills

  • Must pass pre-employment and random drug tests as well as a background check.

  • Manages by way of participative leadership. Recognizes his/her emotions and that of his/her team and develops actions to motivate, inspire and direct in a more effective manner.




Reporting to This Position

10 to 15 direct reports



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38738
Job Location: Phoenix, AZ
Rate: 130000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-17 00:00:00.0
Input Date: 09/17/2019
Last Updated: 10/30/2019
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA.  Please send your resume to pzack@pdstech.com for consideration.  
 
  • Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
  • Provide design and process improvement feedback to engineers.
  • Able to work with minimal direction
  • Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
  • Knowledgeable in basic inspection and hand tools
  • Interpret drawings and instructions
  • Requires travel up to 20% of the time
  • Soldering experience including use of heat guns for shrink tubing operations a plus.
  • Leverages other factory resources and personnel to get work done for the team
  • Must be willing and able to obtain a security clearance
  • Perform other related duties as assigned
  • Ability to train other associates as needed.
  • Section inert welded parts a plus.
  • Ability to perform basic machining functions (no energetic parts). 
  • Oversees build and testing process flow of development hardware.      

  • Education Required:          High school diploma or equivalent.  Technical training and job related certifications preferably in special processes.
  • Experience Required:        3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

 
Job Number: 1910107309
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMSlQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Inspector

Description:
We have an outstanding Contract position for an Entry Level QC Inspector I to join a leading Company located in Ann Arbor, MI.

**Position requires U.S. Citizenship.**

The Quality Control Inspector I examine products and materials for defects or deviations from specifications.

Major Responsibilities:
Inspects purchased parts and materials for conformance to specifications. Examines items for defects in materials, work, and damage occurring in transit, inspects and measures items for dimensional accuracy fit, alignment and functional operation according to prints, parts manuals, company standards, and other specifications.
Approves in-process production by confirming specifications; conducting visual and physical tests; communicating required adjustments, issues or trends to the Quality Control Lead.
Approves finished goods by confirming specifications; conducting visual and physical tests; returning products for re-work; confirming re-work.
During the inspection process, the Inspector may engage in preassembly-preparatory work such as cleaning of the housing, removal of excess adhesives, degreasing nuts, and screws, and the greasing of o-rings and seal rings.
During the visual inspection, the Inspector will look for any abnormalities such as dents, missing parts, and the general integrity of the product; the Inspector will also check for minor cosmetic issues such as scratches, nicks and switch operations.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
Quality Control knowledge
Desired Qualifications:
0-2 years of quality experience in a manufacturing environment.
Metrology knowledge and understating CAD drawings.
Knowledge and understanding of GD&T (geometric dimensioning and tolerance).
Ability to work on a team and collaborate with others.
Ability to communicate clearly and effectively.
 
Job Number: 35945
Job Location: Cypress, CA
Duration: 6 Month +
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Engineer

Description:
SG is hiring an Entry Level Mechanical Engineer for a 6+ months contract opportunity in Omaha, NE!

Job Description:

Requires engineering degree in a specific discipline and 0-4 years of engineering experience.
Prepare designs for pipeline, meter, regulator and relief valve sizing and compression facilities; specify materials to be purchased to implement facility designs; develop project implementation schedules; prepare cost estimates; perform engineering studies involving data analysis and process flow analysis and written reports.
 
Job Number: 375356
Job Location: Omaha, NE.
Per Diem: Possibly
Overtime: Possibly
Duration: 6+ Month's
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

FAA Electronic Technician

Description:
PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • Ability to READ SCHEMATICS a PLUS- To diagose and repair circuitry
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

Please send your resume to mmarquez@pdstech.com today!
As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 2-6 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st OR 2nd shift.
  • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
  • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

 
Job Number: 1910107439
Job Location: Olathe, KS
Duration: 6 months
Input Date: 10/09/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fN6OQAU&URLSource=cjhunter

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's for openings in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

FULL TIME/2ND SHIFT
WORK HOURS: 3:30 PM - 12:00 AM

MISCELLANEOUS:
Mechanic will receive basic assembly training for 2 - 4 weeks, depending on work station assigned.
 
Job Number: 179979
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 06/18/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Engineer

Description:
Facilities Project Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The candidate will provide professional facility engineering and project management experience to designated projects and assignments.

The candidate will be responsible for the design, development, verification and documentation of the mechanical infrastructure and equipment used in fabricating, assembling, testing and inspecting products.

Bachelors degree required

Additional:
The candidate must work well with all functional groups and good communications skills at all levels are required. Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel. Projects range from small single tasks to larger scale construction projects including facility upgrades, facility renovations, special projects, and managing equipment installation. The candidate will assist in the selection and contracting process of consultants and construction teams as necessary for each project Provide hands-on involvement with equipment and processes by being available to the operators, maintenance personnel, and other Facility Engineers and gaining intimate knowledge of processes Manage capital projects on time and within budget
 
Job Number: 11082
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/11/2019
Last Updated: 10/11/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Facility Operations Analyst

Description:
Chipton-Ross is seeking a Facility Operations Analyst for an opportunity in Fort Bragg, NC

RESPONSIBILITIES:
Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.
Servicing of customers' HVAC systems on the job site.

Ordering materials, tools and instruments

Preparing reports and maintaining records on equipment and preventive maintenance

Completing required paper work timely and accurately

Troubleshooting equipment failures both in service center and on customer locations

Installing, maintaining and repairing electronic pneumatic devices related to HVAC control

Practicing and promoting safe working conditions in accordance with OSHA, and other required regulations

Maintain chillers.

Assuring that heating, ventilation and air condition systems are operating in accordance with manufacture's specifications.

Servicing water softener and check for proper operation of hot water and steam boilers

Servicing HVAC and exhaust systems, fan blowers, including filters, lubrications, thermostats, and controls for the entire building.

Servicing all building components including all physical, structure and mechanical equipment.

REQUIRED EXPERIENCE:
Must be a certificated HVAC technician.

Must be able to pass CRC Physical/Medical assessment.

EDUCATION:
Accredited High School Diploma/GED


MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 180468
Job Location: Fort Bragg, NC
Rate: $DOE
Duration: 2 MONTHS
Input Date: 07/17/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Fatigue and Damage Tolerance Engineer

Description:
Chipton-Ross is seeking a Fatigue and Damage Tolerance (F&DT) Engineer for an opening in Arlington, TX.

RESPONSIBILITIES:
Structural analysis tasks in support of Airframe Structural Test and Certification. Tasks can include:
" Perform F&DT tasks related to trade studies to determine best design approach to meet airframe design requirements.
" Provide F&DT support for design layouts, including determination of optimum loads paths, material and hardware selections, and least weight / low cost designs.
" Provide F&DT sizing and analysis for airframe preliminary design.
" Provide sizing updates and final analysis for detail design releases.
" Calculate fatigue life and inspection intervals of airframe components
" Prepare F&DT certification reports
" Preparation of test requirements, test plans, test reports, internal loads correlation, and other analysis and documentation related to structural testing
" Communicate with internal and external team members effectively.

REQUIRED EXPERIENCE:
Fatigue and Damage Tolerance (F&DT) engineer experienced with metallic and composite airframe, or related structures. Provides fatigue and damage tolerance analysis support for new product development from conceptual through detail design. Some knowledge and experience is required in the following areas, with substantial experience and expertise in many of these areas:
" Airframe structural criteria / requirements
" Aircraft Fatigue spectrum development
" Aircraft Fatigue analysis and life prediction
" Aircraft damage tolerance analysis and inspection interval calculation using NASGRO or similar tools
" Calculation of stress concentrations using classical and FEA methods
" F&DT report preparation
" F&DT support for manufacturing and change board
" F&DT support for structural test including coupon, design development, component and full-scale static and fatigue, and flight test
" F&DT support for damage limits, structural repairs and mods to support repair limits and structural repair manual preparation.
" Trade studies
" Preliminary and final sizing analysis
" Stress analysis using hand analysis calculation methods
" Concept development for least weight designs

Candidate must have proficiency in extracting internal loads from finite element coarse grid models and applying those loads for use in static strength and F&DT analysis. Tools utilized may include CATIA, MSC PATRAN / NASTRAN, TMP SLIM and Vision, and a variety of other software applications related to airframe structural analysis and design. Tools for fatigue and damage tolerance analysis include NASGRO, Mechanica, StressCheck and a variety of other software applications related to airframe structural analysis and design. Excel VBA coding experience is desired.

EDUCATION:
Accredited Bachelor's degree Mechanical, Civil or Aerospace Engineering from an accredited university and a minimum of ten years of related experience. A Master's degree is preferred.

WORK HOURS:
Full-Time

 
Job Number: 181980
Job Location: Arlington, TX
Rate: Up to $75.00 DOE
Duration: 6+ Months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Must have aircraft experience working mechanical and structural jobs.



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107279
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/04/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beabout
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMMbQAM&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.

Unique Skills:

Excels working in Team environment



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107120
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fLjSQAU&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 


Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Works well in a team environment, brings positive attitude and energy to the team along with willingness to learn.



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 

 
Job Number: 1910107214
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM2nQAE&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Able to use hand tools. Detail oriented people.




Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107284
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 09/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kendra Agnew
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMNAQA2&URLSource=cjhunter

Flexographic Press Operator

Description:
Shift Available

  • 7 p.m. to 7 a.m., alternating two-week schedule (3 days one week and 4 days the next week)


Responsibilities Include:


  • Carry out accurately and precisely detailed instructions from job orders. Identify possible errors or problems and take prompt action to correct.

  • Set up/adjust press for job runs to meet specifications.

  • Monitor product for quality during job runs. Check preciseness of detail against specifications. Take action to correct any problems.

  • Monitor equipment during job runs. Remain alert to mechanical problems and refer as necessary to maintenance.

  • Initiate the start up and running of jobs in keeping with production schedule.

  • Perform routine equipment maintenance and upkeep.

  • Meet standards for output, waste, and spoilage.

  • Pack finished products into cartons; label and stock on pallets. Oversee packers (when assigned) on same. Give instruction as appropriate to assigned packer/helper.

  • Adhere to all safety guidelines. Keep workspace clean and organized for efficiency in shift changeovers.

  • Complete with accuracy related logs and paperwork.


Minimum Qualifications:


  • Training and/or on-the-job experience equivalent to apprenticeship completion on rotary web press

  • Ability to effectively communicate in the English language.

  • Operational knowledge of rotary web press

  • Shop math skills

  • Ability to understand and apply detailed information

  • Demonstrated ability to meet or exceed performance standards

  • Knowledge of paper stocks, inks and related materials/techniques used in printing industry

  • Work planning skills

  • Ability to meet physical demands of job (lifting, standing, machine noise)

  • Ability to complete detail work precisely

  • Knowledge of safety standards


Preferred Qualifications:


  • Two years of flexographic press operator experience at journey level preferred.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-28654
Job Location: Dallas, TX
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-07-12 00:00:00.0
Input Date: 09/16/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

Flight Test Instrumentation Engineer

Description:
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system.
Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.
Flexibility to make business travels and also possible relocation between Japan and US are expected.

Responsibilities:
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Bachelor degree along with a minimum of 1 year of flight test operations experience
-Or-
A minimum of 5 years experience in flight test operations in lieu of the degree
Excellent demonstrated verbal and written communication skills
Ability to defuse and resolve conflict among other team members
Ability to quickly learn new software and systems
Must be capable and comfortable working within a diverse team environment
Strong oral, written, and presentation communication skills

Desired
Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
Experience in design of instrumentation installation of sensors, wiring and equipment
Ability to perform strain gage installations
Knowledge of flight test operations and certification requirements.
Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols
Knowledge on telemetry and data monitoring systems

 
 
Job Number: 1910107312
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMT0QAM&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

Flight Test Manager

Description:
PDS Tech Inc. is seeking a Flight Test Manager, Regional Jet Development Project.
This position is located in Moses Lake, WA.

SCOPE:



The Flight Test Team Manager will be assigned with an Aircraft and be responsible for Flight Test Vehicle (FTV) Work Scope, Performance, Execution and Scheduling of the assigned aircraft. Flight Test Team Manager will be responsible for managing initiation, planning, and execution of flight tests and ensuring completion of the flight test within the given schedule. 

The Flight Test Team Manager’s responsibilities include, but not limited to, the following:



  • Assign work, goals to the FTV team members
  • Ensure Test Readiness, Deliverables are on track
  • No injuries or accidents
  • Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance)
  • Update and present short term schedule (90 days) to Functional Leads weekly
  • Manage the entire FTV schedule through certification
  • Provide daily and weekly FTV status
  • Ensure support for short term schedule activities via Functional Leads
  • Resolve issues with Functional Leads

Flight Test Managers have authority for the following:

  • Setting aircraft configuration, schedule, testing and maintenance goals
  • Implementing process improvements directly related to their FTV

¨  Bachelor of Science degree, or equivalent education and experience, in Aeronautical, Mechanical, or Electrical Engineering, Physics, Mathematics or Computer Sciences from an accredited institution.
 
¨  Must have 15 years of related experience with a minimum of 10 years or more of space flight test experience as described above. .
 
¨  Must be legally able to work in the US.
 
¨  Professional experience in a multilingual and multi-cultural environment.
 


 
Job Number: 1810080780
Job Location: Moses Lake, WA
Duration: 36 months
Input Date: 11/12/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002diwyAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Project Engineer

Description:
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.

The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.

They will:
• Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
• Support and manipulate Microsoft based tools in support of project schedule and status.
• Communicate with other program integrated product teams.
• Compile and analyze performance reports.

The ideal candidate will have:
• Superior business and data skills,
• Knowledge of IMS based project management and can work in a team environment.
• Understanding of Aerospace, Helicopter and / or development program experience
• Knowledge of mechanical / structural design and test

Looking for someone who can jump in, learn the tools and support this ambitious test program. Someone who has been around development programs, engineering and / or even test. The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
Job Number: 1910107247
Job Location: Stratford, CT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 10/04/2019
Last Updated: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 04/12/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is looking for InProcess Inspectors for direct opportunities in Chandler, AZ.  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred



 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101129
Job Location: Chandler, AZ
Duration: 0 months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dqMQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector

Description:
We have an Excellent Contract position for an Inspector to join a leading Company located in the Lexington, MA surrounding area.

**U.S. Citizenship Required.

Job Responsibilities:
Provide visual and precision inspection of assemblies during the production process.
Under general supervision, performs visual/mechanical inspections on simple to moderately complex components, assemblies and subassemblies to ensure compliance to applicable quality specifications and standards.
Works from specifications, drawings, process sheets, engineering change orders and written and verbal instruction to inspect components subassemblies and assemblies against required quality standards (i.e., proper component orientation, masking, soldering, coating, etc.).
Utilizes a full range of complex precision tools and inspection techniques (i.e., optical set-ups, etc.) for evaluation for product compliance.
Identifies and documents defects and calculates defect rates against specified control limits.
Inspects and tests components, subassemblies, and assemblies after rework, modifications or repairs to verify defects have been corrected and ensure continuity to drawings, prints, etc.
Verifies configuration of the product to ensure conformity to the most recent revision.
Prepares various inspection and evaluation documentation and inputs data into the appropriate systems (i.e., SFDS, Lotus) for future review and analysis.
Maintains required records.
May create and/or analyze other quality-related data.
Performs final inspection and reviews documentation prior to customer acceptance to ensure the end product meets customer requirements.
May interact with the customer regarding the presentation of the product and other product-related information.
Conducts process audits in all phases of manufacturing and inspection (i.e., calibration, materials, process sheets, etc.) to confirm processes are being accurately followed.
Conducts more complex quality system audits as required.
Interfaces with engineering regarding technical issues (i.e., engineering change orders) and problem.
May perform field return evaluations to ensure returns are repaired within quality guidelines.
May work with engineering on specialized tasks (i.e., bond room, engineering lab, tech publications & manuals), various prototype systems to set up detail inspection procedures, or other special evaluations as required.
Provides training and guidance to lower level inspection personnel as required.
Performs other duties and responsibilities as required.
Basic Hiring Criteria:
High School Diploma or equivalent.
Minimum one year of verifiable experience.
Desired Qualifications:
Ability to read blueprints, process sheets and other related documentation used for the inspection of components, assemblies, and subassemblies. - Ability to utilize various inspection tools such as microscopes, gauges, etc. - Ability to demonstrate effective verbal and written communication skills. - Ability to work in a paperless environment utilizing a manufacturing database

(Please include job id when applying)
 
Job Number: 37802
Job Location: Lexington, MA
Rate: $17.00 t0 $27.40
Duration: 12 Month
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Interior Designer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
• Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
• Develops designs for form/fit/function to meet customer and design criteria.
• Provides designs for the fabrication process including sheet metal, extrusions and inject molding.
• Familiarity with structural analysis methods, load paths, and material properties.
• Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
• Makes recommendations to engineering lead/management.
• Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.

Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
• Masters’ degree in Engineering preferred.
• Minimum of 10 years engineering design experience directly related to mechanical/interior design required.

Knowledge, Skills and Abilities:
• Working knowledge of conceptual design development of aircraft interiors.
• Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
• In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Familiarity with 14CFR Part 23/25.
• Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
• Proficiency in Teamcenter (or equivalent PLM tool).
• Ability to work independently or within a team environment.
• Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
• Ability to work cross functionally with Quality and Production to resolve issues on the production line.
 
Job Number: 28-007
Job Location: Greensboro, NC
Rate: $50 - $60/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interiors Design Engineer

Description:
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-832
Job Location: Central USA
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/16/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job ID 38360/4063

Description:
We have an Excellent Contract position for a Mechanical Design Engineer to join a leading Company located in San Jose, CA. When applying please enter Job ID 38360/4063


Contract 12 Month or possibly longer
Pay Rate $44.65 to $49.76
Work Schedule- 9/80
Travel 10%-
Over Time- Required

Job Responsibilities:
• In this role, you will lead the integration of vehicle powertrain components onto the vehicle platform.
• Typical components could include gearboxes, generators, and various control units.
• You should be familiar with methods to isolate sensitive electronics from vibration as used in military tracked vehicles.
• You will have the responsibility to update and release design changes using PTC CREO and completing all related design change processes.
• Develop designs to meet provided requirements.
• Incorporation of design revisions.
• Analyze and interpret design specifications, drawings, documentation, models, and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
• Participate in design and process reviews Interface with senior members of the integrated product team to status issues.
Job Qualifications:
• Bachelor of Science degree in Mechanical Engineering.
• 2+ years of packaging components into a defined space claim.
• PTC Creo, or similar CAD software, experience.
• Understanding of and ability to apply GD&T to drawings.
• Experience analyzing bolted joints.
• Experience performing tolerance analyses.
 
Job Number: 38360
Job Location: San Jose, CA
Rate: $44.65 to $49.76
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job ID 38384/9466202

Description:
We have an outstanding Contract position for a Senior Tool Design Engineer to join a leading Company located in the Camden, AR surrounding area. (With resume add the Job Id38384).

Contract- six month or longer
Pay Rate - $50 to $75 per hour
Work Schedule- 4/10 week


Job Responsibilities:
Design manufacturing tooling for the production of solid-fuel rocket motors and warheads.
Develops jigs, fixtures, lifting devices, and semi-automated equipment to cast and assemble the final product.
Design mechanical equipment using Unigraphics NX CAD System.
Interface with production, program, and safety to develop requirements and tooling needs.
Define existing equipment problems and design repairs and modifications.

Basic Hiring Criteria:
Solid modeling and drawing experience in Unigraphics NX or PTC Creo software.
Must have experience using a solid modeling program such as Unigraphics NX, Pro-Engineer, AutoCAD Inventor, or Solid Works. Must have a working knowledge of air controls.
Requires a Bachelor's degree in an appropriate discipline and six (6) years of related technical experience in the design of tooling to support manufacturing (or an equivalent combination of education and experience).
Eight years of applicable experience with no degree is appropriate.
With an associate's, knock off two years – so an associate degree plus six years applicable experience.

Desired Qualifications:
Finite element stress analysis through Nastran, Ansys, etc. (Finite element analysis (FEA) is not a necessity but a bonus. Realistically, if we could get one out of four advertised candidates with 2 to 5 years of experience in that it would be ideal).
Our two main software systems are Unigraphics NX and PTC Creo (also called Pro-Engineer).
NX is our legacy system, and Creo is what AR is moving to as a company, so our best candidates will be those that have experience in one of these packages.
 
Job Number: 38384/9466202
Job Location: Camden, AR
Rate: $50.00 to $75.00 hour
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Hardware Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Lead Hardware Engineer
(US Citizenship Required*)
Fairfax, VA
2019-9743

Responsibilities:
• IPT Lead for a small team (3-5 people) of mechanical and electrical engineers responsible for hardware design, development, documentation, and life cycle support.
• Understand and perform design and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines.
• Lead development of strategic tasks or small to mid-size projects by applying engineering and organizational knowledge and expertise to achieve technical goals
• Provide technical input to Project or Engineering Management in linking project-related strategy to achieve business goals
• Monitor the project from initiation through delivery including planning and directing schedules and monitoring budget/spending
• Understand and interpret the technical, organizational and process aspects of the task assigned and can relate them to the technical needs of the overall project or organization
• Plan and execute small to mid-size projects or task elements within larger projects, organizations, or for groups of projects
• Responsible for the completion of assigned engineering tasks or mid-size projects within budgetary and scheduling guidelines
• Direct, coordinate, and exercise functional authority for planning, organization, control, integration, and completion of engineering tasks or small projects within area of assigned responsibility
• Actively uncover technical and organizational risks and ensures they are included in risk mitigation plans
• Participate in development of program strategies and teaming strategies as they relate to the assigned project
• Participate in the development of executable project plans on proposals
• May provide leadership and/or direction to employees. Mentors lower labor grades in mechanical principles and project performance
• Creative, innovative responsibilities requiring advanced decision-making skills
• Demonstrate good judgment in selecting methods and techniques for obtaining solutions
• Work on problems of diverse scope where analysis of data requires evaluation of identifiable factors
• Carry out other tasks, not listed, assigned by supervisor

Qualifications:
• An Active Department of Defense Secret Security Clearance is required at time of hire
• Travel may be required
• Have a good understanding and working knowledge of electrical design, equipment, components, and systems.
• Develop and review engineering drawings and technical documentations.
• Proficient with using AutoCAD Inventor drawing and modeling software.
• Experience with hardware cabinets, enclosure, and structural design used in undersea platforms (i.e. submarines).
• Understand installation of equipment for thermal and mechanical stress/safety considerations.
• Good understanding and working knowledge of electrical hardware design and components.
• Strong experience with environmental qualification testing of hardware and system components, including EQT test development and execution.
• Strong experience and understanding with manufacturing and production processes, procedures, and standards (e.g. IPC620, ANSI, EIA, etc.). Support the build, inspection, and qualification of components, equipment, and assemblies.
• Solid understanding, experience, and working knowledge of the AN/BQQ-10 SONAR system.
• Progam schedule and cost management and reporting. Understanding of EVMS is a plus.
• Strong communication skills. Interface with managers, engineering project and team leads, and customers. Able to lead and guide a small team.
• Shows initiative on assignments, exercises independent judgment and professionally executes projects with little direction
• Comfortable with multitasking and customer presentations.
• All Microsoft Office applications (Word, Excel, PowerPoint, Outlook, etc.)
• Prefer proficient knowledge of Finite Element Analysis (FEA) tools
• Demonstrated proficiency in writing technical papers and proposals
• Demonstrated history of leading an engineering project and team
• Exercise creative thinking and ideation to advance our business performance.
• Deliver innovative, flexible, integrated solutions to meet customers changing business needs.
• Proficient and able to perform all responsibilities associated with the position
• Proficient ability to handle more complex assignments
• Support and engage in programs, projects and practices behind the General Dynamics Mission Systems culture and strategy, and comply with all policies and procedures.
• Follow industry and department trends and developments to ensure General Dynamics Mission Systems services are consistent with, and/or superior to, industry best practices.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Mechanical Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 5 years of relevant experience; or Master's Degree with a minimum of 3 years of relevant experience.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9743
Job Location: Fairfax, VA
Input Date: 09/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Lead Product RF Circuits Design Engineer

Description:
Johnson Service Group is seeking an experienced Lead Product Design Engineer for our premier Client in Camarillo, CA.

Position Summary:

An experienced Mechanical Engineer with RF product design experience.

Job Responsibilities:

Creates RF circuit layouts based on input from RF engineers
Designs and analyzes mechanical packaging for RF circuit layouts
Understands and designs to meet customer specifications and other requirements for space applications
Creates fabrication drawings to support procurement
Creates bills of material and assembly drawings to support manufacturing
Supervises and coordinates work of other product design engineers working on the same project
Creates and maintains indentured drawing lists for new custom designs
Prepares and maintains schedules for completion of all the various types of documentation
Designs fixtures as required for manufacturing / testing
Job Requirements:

Bachelors of Science in Mechanical Engineering or similar
A minimum of 4 years of related experience with microwave package design for space applications
Knowledge of AutoCAD, SolidWorks, Microsoft Office
Knowledge of materials and processes used in microwave circuit construction
Knowledge of machined part design
Experience creating all types of documentation listed above
Familiarity with ERP database desired, particularly Intuitive ERP
 
Job Number: 374839
Job Location: Camarillo, CA.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/31/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: Lpeck@jsginc.com
Website: www.jsginc.com

Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/01/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
MRB Engineer

Location: Milledgeville, GA

12+ month contract

Call Laura Leszek at 765-427-4721 if you are interested after reviewing the details!

Our client has an immediate opening for an Aircraft Structural Liaison Engineer with 15+ years of experience to review and provide dispositions to non-conforming composite and metallic detail part and assembly withholding tags. This role will be responsible for Boeing Commercial structure and/or systems repair creation therefore familiarity with Aerospace Material Review Board processing and Boeing D-13709-4 'Requirements of Obtaining Material Review Board Authority by Boeing Subcontractors' specifications is a must and should be capable of conveying engineering dispositions part/assembly meeting design intent. 

Responsibilities

Provide MRB Engineering Support to Operations to address issues occurring during the fabrication of aircraft and/or aircraft components in support of the Boeing programs.
Liaison Engineering functions to include investigation of mfg. issues, design of repairs, engineering support to manufacturing for dwg/spec interpretation, coordinating efforts across a multiple functional organization, such as Planning, Tooling, Stress, M&P, Materiel, and Manufacturing.
Coordinates with other engineering organizations to ensure that repairs meet customer and contractual requirements. 
Provides technical assistance and direction to team members as required.
Determines and develops own approach to solutions within schedule and cost objectives while working under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources.
Frequent inter-organizational and outside customer contacts.
Represents the organization in providing solutions to difficult technical issues associated with specific projects.
Qualifications

Successful candidates typically possess

BS Engineering (Aerospace, Mechanical, or Civil Engineering) from an accredited program recognized by the Washington Accord
15-20 years experience of Aerospace Engineering
Prior Boeing Commercial MRB Liaison Signature Authority with successful completion of Boeing MRB Structural Repair Analysis Course, or equivalent a plus.
Strong interpersonal skills with ability to interface with customers at all levels 
Exceptional time management and organization skills
Strong analytical skills


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57254
Job Location: Milledgeville, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/01/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Machine Operator

Description:
Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in Hollister/Monterey Bay area. Their company has a real impact on space exploration, homeland security and the nation's defense.

Every employee is an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems we face today. We are looking for those who are ready to reach the peak of technology.​

  • Support Overtime as required or scheduled by Supervisor.
  • Must have knowledge in the use of basic mechanical measuring tools (micrometers, microscopes, calipers, thread gages, etc.).
  • Perform dimensional and visual inspections of linear flexible explosive product during the manufacturing process using basic measurement tools using established procedures with minimum supervision.
  • Perform basic hands-on machine setup procedures and select machine dies and parts, according to specifications.
  • Install dies and other tooling into processing machines for subsequent processing.
  • Load the extruder with plastics that feed the machine according to production line requirements.
  • Recognize and replace worn dies when products vary from specifications.
  • Spool processed products into rolls of specified lengths and weights.
  • Troubleshoot, maintain, and make minor repairs to machine equipment.
  • Maintain clean work areas.
  • Adjust controls to process materials into specified shapes and diameters.
  • Process explosive materials remotely on various types of equipment; Swagers, Form Mills, Square Chuck, Yoder, Draw Bench, Stationary Swager, and Extruder.
  • Process energetic powder from free flowing to pelletized material using a Stokes Rotary Press.
  • Must possess the ability to interpret basic drawings and instructions.


 
Education Required:     High school diploma or equivalent
Experience Required:    0-3 years related experience
 
Job Number: 1810093673
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/17/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f8CgAAI&URLSource=cjhunter

Machine Operator

Description:
Machine Operator



Shot peening is a cold working process used to produce a compressive residual stress layer and modify the mechanical properties of metals and composites. It entails impacting a surface with shot (round metallic, glass, or ceramic particles) with force sufficient to create a plastic deformation.

  • This position is for a client in the Ambridge Area




  • The position is permanent in a metal manufacturing environment (Shot peening), exciting opportunity to learn a trade and learn all aspects of the business

  • Opportunity to grow with the company




  • Candidate must have a resume and interview with the client prior to starting




  • Must have Machine Operating experience and a background in metals is preferred

  • CNC and PLC experience preferred




  • Candidate must also be able to do their own set-ups, run the parts and use hand tools

  • Must be able to travel for assignments




  • Must be comfortable reading blueprints and read measurements


Please give me a call if you are interested in getting more information about the position or if you would like to schedule a phone interview appointment anytime soon.

My phone numbers are 412 246 4828 or 412 281 8235. Please ask for RAMI ASHAMALLA. Or you can email me directly at rashamalla@nescoresource.com



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-32692
Job Location: Ambridge, PA
Rate: 15.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-15 00:00:00.0
Input Date: 09/09/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Machine Operator

Description:
Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in Hollister/Monterey Bay area. Their company has a real impact on space exploration, homeland security and the nation's defense.

Every employee is an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems we face today. We are looking for those who are ready to reach the peak of technology.​

  • Support Overtime as required or scheduled by Supervisor.
  • Must have knowledge in the use of basic mechanical measuring tools (micrometers, microscopes, calipers, thread gages, etc.).
  • Perform dimensional and visual inspections of linear flexible explosive product during the manufacturing process using basic measurement tools using established procedures with minimum supervision.
  • Perform basic hands-on machine setup procedures and select machine dies and parts, according to specifications.
  • Install dies and other tooling into processing machines for subsequent processing.
  • Load the extruder with plastics that feed the machine according to production line requirements.
  • Recognize and replace worn dies when products vary from specifications.
  • Spool processed products into rolls of specified lengths and weights.
  • Troubleshoot, maintain, and make minor repairs to machine equipment.
  • Maintain clean work areas.
  • Adjust controls to process materials into specified shapes and diameters.
  • Process explosive materials remotely on various types of equipment; Swagers, Form Mills, Square Chuck, Yoder, Draw Bench, Stationary Swager, and Extruder.
  • Process energetic powder from free flowing to pelletized material using a Stokes Rotary Press.
  • Must possess the ability to interpret basic drawings and instructions.


 
  • Education Required:     High school diploma or equivalent.
  • Experience Required:    0-3 years related experience; 

 
Job Number: 1810089357
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/09/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgVGAAY&URLSource=cjhunter

Machinist

Description:
PDS Tech is seeking enthusiastic research technicians (machinists) for our technical R&D team.
This team designs and machines devices to solve operational challenges. As part of the Advanced Technology R&D Team, you will directly support development of solutions that are critical to our client's business units. As a research technician, you will machine and assemble a variety of complex mechanical devices, working from initial prototype to final, deliverable product.
This position is an excellent opportunity to develop design skills and advance mechanical hands-on skills while being directly involved with current, high-priority projects. We have opportunities that cover the full spectrum of experience within this important technical specialty.

Additional Qualifications:



• Ability to work safely

• Proficiency with manual lathe and mill

• Understanding and application of machining fundamentals

• CNC programming and set-up experience (Mastercam, Haas, Okuma, Milltronics)

• Working knowledge of metals and other materials and their characteristics

• Motivated by a hands-on work environment

• Ability to think analytically and logically in troubleshooting technical problems

• Ability to work effectively in a team environment

• Ability to effectively interact with customers

• Effective written and oral communication skills are a necessity

• Strong computer skills



Potential areas of growth



• CAD design (Creo Parametric, formerly Pro/E)

• Multi-axis milling

• 3D printing/additive manufacturing

• Machining scientific alloys (Invar, Mu Metal, copper tungsten)

• Sheet metal fabrication

• Welding and brazing processes (Mig, tig, spot and arc)

• Woodworking

• Carbon fiber and fiberglass layup

 
Currently enrolled/recent graduate of a machining program offered by an established technical institute or equivalent or 2 year technical degree/certification or military training equivalent. In lieu of technical certification, four years of related experience is required.


 
 
Job Number: 1910106982
Job Location: Minneapolis, MN
Per Diem: No
Duration: 6 months
Input Date: 09/30/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Paige West
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fKhZQAU&URLSource=cjhunter

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Tech/Welder

Description:
Maintenance Technician located in Blawnox, PA.



Experience

Mechanical experience with pumps, hydraulics, pneumatics, etc.


Electrical experience is a plus.



The candidate would have overtime opportunities and would be expected to work overtime.



Hours would be mainly daytime (anywhere from 6:00 am to 6:00 pm but would also need to be available at certain times later at night and on some weekends.




Please send your resume for review and consideration or contact Rami Ashamalla at 412 246 4828 or send your resume at rashamalla@nescoresource.com



Thank you,



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-24215
Job Location: Blanwnox, PA
Rate: 18.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-05 00:00:00.0
Input Date: 09/09/2019
Last Updated: 10/29/2019
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
Nesco Resource has a great opportunity for a Maintenance Technician in the Naugatuck, CT area.The ideal candidate will be a self starter who works well with others in a diverse and fast paced environment..



Primary Responsibilities:



• Repair and maintain all machinery

• Perform preventative maintenance on all equipment

• Ensure that an appropriate in-house supply of parts is available

• Examine and maintains protective guards and other safety devices on all equipment and makes adjustments as necessary

• Perform general maintenance of all facility equipment

• Enter work order, work log, and parts information into the computer system

• Assist where needed in the facility

• Repair and maintain machinery, plumbing systems, sprinkler systems, air compressor and dryer equipment, and pneumatics

• Perform general construction work 

• Interface with vendors as required

• Operate Electrical testing equipment

• Other duties as assigned by lead or supervisor



Qualifications

Basic:



• High School education or equivalent

• Experience in forklift maintenance, conveyor maintenance or a related field

• Mechanical, Electrical or Electro mechanical aptitude

• Ability to weld

• Proven computer literate

• Ability to work with AC voltage 

• Ability to perform maintenance on Industrial Batteries, including watering, washing, testing and repair

• Ability to lift, push or pull items weighing 70 pounds to 100 pounds

• Knowledge of hydraulics, electrical and pneumatics



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38457
Job Location: Naugatuck, CT
Rate: 22.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-25 00:00:00.0
Start Date: 2019-09-23 00:00:00.0
Input Date: 09/16/2019
Last Updated: 10/31/2019
Firm Name: NESCO RESOURCE
Attention: Belle Rivera
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance supervisor / Journeyman

Description:
JOURNEYMAN MAINTENANCE MAN



PROVIDE PREVENTIVE MAINTENANCE AND REPAIR OF PLANT EQUIPMENT AND PROPERTY AS WELL AS FABRICATE EQUIPMENT TO SUPPORT OPERATION OF THE FOUNDRY.



PERFORM MAINTENANCE/REPAIR OF FOUNDRY EQUIPMENT AND PROPERTY. ASSIST OPERATORS IN STARTING EQUIPMENT AS NECESSARY. MAYBE REQUIRED TO INSTALL NEW EQUIPMENT, CONSTRUCT NEW BUILDINGS OR ADDITIONS, AND FABRICATE EQUIPMENT FOR FOUNDRY PRODUCTION NEEDS. PERFORMS DUTIES TO WORK INSTRUCTIONS AND QUALITY REQUIREMENTS.



DESCRIPTION:

PERFORM MAINTENANCE/REPAIR OF FOUNDRY EQUIPMENT AND PROPERTY. ASSIST OPERATORS IN STARTING EQUIPMENT AS NECESSARY. MAYBE REQUIRED TO INSTALL NEW EQUIPMENT, CONSTRUCT NEW BUILDINGS OR ADDITIONS, AND FABRICATE EQUIPMENT FOR FOUNDRY PRODUCTION NEEDS. PERFORMS DUTIES TO WORK INSTRUCTIONS AND QUALITY REQUIREMENTS.

ELIGIBILITY REQUIREMENTS: MINIMUM OF HIGH SCHOOL DIPLOMA (OR EQUIVALENT).



MAINTENANCE MAN MUST BE SKILLED IN MANY TRADES, INCLUDING ELECTRICAL, HYDRAULICS, PNEUMATICS, CARPENTRY, WELDING AND BURNING, PLUMBING, HEATING AND AIR CONDITIONING, MECHANICS, MASONRY AND CONCRETING.

MUST BE ABLE TO READ, WRITE AND FOLLOW DIRECTIONS ACCURATELY. MECHANICAL AND REASONING SKILLS ARE NECESSARY. ABILITY TO READ BLUEPRINTS, MANUALS, WIRING DIAGRAMS, AND SCHEMATIC DRAWINGS NECESSARY. MUST BE INNOVATIVE AND SAFETY CONSCIOUS FOR PROTECTION OF SELF AND FELLOW WORKERS.



JOURNEYMAN STATUS IS ACQUIRED BY COMPLETING A FOUR YEAR APPRENTICESHIP PROGRAM AT THE FOUNDRY OR HAVING 4 YEARS EQUIVALENT MAINTENANCE EXPERIENCE FROM A SIMILAR INDUSTRY.

ESSENTIAL DUTIES: INDIVIDUAL MUST BE ABLE TO PERFORM MAINTENANCE AND REPAIR DUTIES. VISUALLY INSPECT AND TEST MACHINERY AND EQUIPMENT, CLEAN AND LUBRICATE MACHINERY. MUST BE ABLE TO USE HAND AND POWER TOOLS, WELDING EQUIPMENT, TESTING EQUIPMENT, HOIST, MEASURING TOOLS, AND BE ABLE TO OPERATE MOBILE EQUIPMENT, SUCH AS BACKHOE, EXCAVATOR, FRONT END LOADER, YARD CRANE, FORK TRUCKS AND DUMP TRUCKS. COMPLETES MAINTENANCE WORK ORDERS. OBSERVES SAFETY REQUIREMENTS, LIFTING GUIDELINES, AS WELL AS CHAIN/SLING LIFTING REQUIREMENTS. WEAR PROTECTIVE EQUIPMENT AS REQUIRED. PERFORMS OTHER DUTIES AS ASSIGNED.



ADDITIONAL NON-ESSENTIAL DUTIES:

MAINTAIN MAINTENANCE AND INSPECTION RECORDS. KEEP WORK AREA CLEAN AND ORDERLY.



PHYSICAL REQUIREMENTS:

MEDIUM TO HEAVY DUTY WORK. INDIVIDUAL IS REQUIRED TO BE ON THEIR FEET MOST OF THE DAY. MUST BE ABLE TO LIFT AND CARRY EQUIPMENT AND REPAIR PARTS. DUTIES OFTEN REQUIRE CLIMBING LADDERS AND CLIMBING ONTO VARIOUS PIECES OF EQUIPMENT. FREQUENT PULLING AND PUSHING, STOOPING, CROUCHING, AND KNEELING ARE REQUIRED. MUST BE ABLE TO MAINTAIN HIS/HER BALANCE WHILE CLIMBING AND WORKING ON OVERHEAD CRANES.

 

WORKING CONDITIONS:

WORK IS PERFORMED BOTH INDOORS AND OUTDOORS. WORK AREA IS DIRTY, DUSTY, AND OFTEN GREASY AND DIFFICULT TO ACCESS. MAYBE EXPOSED TO WELDING AND CUTTING FUMES. DEPENDING ON ASSIGNMENT MAY BE EXPOSED TO EXTREME HEAT AROUND FURNACES OR COLD TEMPERATURES OUTSIDE.



HAZARDS:

HEIGHTS, EXPOSURE TO HIGH VOLTAGE ELECTRICITY, WORKING WITH POWER TOOLS, SAWS, AND WELDING EQUIPMENT (FUMES). WORKING IN CONFINED AREAS. STRAINING AND REACHING. OVERHEAD CRANES CARRYING HEAVY LOADS. SLIPPERY/IRREGULAR SURFACES



EQUIPMENT:

HARD HAT, SAFETY GLASSES, AND STEEL-TOED SHOES ARE REQUIRED. DEPENDING ON ASSIGNMENT MAY BE REQUIRED TO WEAR RESPIRATOR, EAR PROTECTION, WELDING HELMET & GLOVES, OR ADDITIONAL SAFETY EQUIPMENT.



Please send your resume for review and consideration or call Rami Ashamalla at 412 246 4828 or send your resumes at rashamalla@nescoresource.com



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-14913
Job Location: GREENVILLE, PA
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-05 00:00:00.0
Input Date: 09/12/2019
Last Updated: 10/16/2019
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
6 month W2 contract
PART TIME - 30 HOURS PER WEEK
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 20+ years of experience required.

*Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11657
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/27/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.  

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:
  • Assist the Press Operator in running the production line.
  • Learn basic press operation. 
  • Pack finished product.
  • Operate finishing equipment.
  • Prepare tooling for production, including die inventory management and basic tooling set up.
  • Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
  • A fair and consistent pay check

Education:

• High school diploma or GED Required 



Experience:

• Prior experience in manufacturing preferred 

• Demonstrated mechanical aptitude via educational or job experience 



Skills:

• Basic computer navigation and data entry skills required 

• Basic to intermediate mechanical skills required 

• Ability to lift up to 50 lbs unassisted 

• Willingness and ability to perform in a fast paced team environment 

 
 
Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 09/11/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Material Handler
(U.S. Citizenship Required*)
Tallahassee, FL
2019-9822
Responsibilities:
• Experience performing receiving, warehousing, storage, kitting, packaging and shipping of production and customer materials.
• Knowledge and use of the company computerized Manufacturing Resource Planning (MRP II) system.
• Responsible for material logistics of reorder point (bulk issue) materials and bulk wire storage.
• Coordinate production line shortages and vendor return activities through operations planning & control, material acquisition and manufacturing groups.
• Perform all aspects of supply handling, MRP transactions, materials process development, warehousing, reporting, material handling equipment and maintenance, non-conforming material, kiting, expediting, management of government furnished material and equipment, staging, hazardous materials handling, etc.
• Handle bulk material and large items utilizing stackers and forklifts.
• Perform related duties as assigned.

Qualifications:
• Working knowledge of Oracle material management systems preferred
• Knowledge/experience in electro-mechanical assembly environment a plus
• Able to lift/move at least 40 pounds
• Working knowledge of desktop PC operation required
• Some weekend and overtime will be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or GED with up to 1 year of applicable experience.
• Experience in a manufacturing or production/inventory control environment preferred

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Join a team that values your experience!
 
Job Number: 2019-9822
Job Location: Tallahassee, FL
Input Date: 10/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 11/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Materials and Processes Engineer

Description:
Chipton-Ross is seeking a Materials and Processes Engineer for an opening in Mojave, CA.

RESPONSIBILITIES:
First rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used in the manufacture of WK2 and SS2. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.
" Develop and refine material and process requirements
" Author materials and processing specifications
" Author material/joint test plans and their associated reports
" Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
" Review test plans, process specifications, and other documents to ensure compliance with design requirements
" Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

REQUIRED EXPERIENCE:
" Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
" Experience in authoring / revising materials and process specifications for composite materials
" Experience in authoring test plans and reports
" Knowledgable of materials testing and characterization methods
" Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
" A desire to work in a fast-paced work environment with a motivated team
" Excellent verbal and written communication skills
" Excellent organizational skills and problem-solving skills
" Strong team player
" Excellent computer skills, Microsoft Word, Excel and PowerPoint
" Experience in stress analysis methods, including the use of hand calcs and FEM is a plus

EDUCATION:
Bachelor's degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline

WORK HOURS:
Full-Time

IND123 JS1

 
Job Number: 179295
Job Location: Mojave, CA
Rate: $70.59 to $78.43 DOE
Duration: 6 Months
Input Date: 07/21/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Mech Sys Design & Anlys Engr 3

Description:
Mech Sys Design & Anlys Engr 3

Location: Mesa, AZ
Duration: 12+ Months

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Supports system components' designs/proposals standards to provide installation and detail documentation using NX. Trains others. Works under general direction

Skill Code: 63B-Mechanical System Design

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Location: Mesa, AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: asap
Input Date: 09/27/2019
Last Updated: 11/11/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com