Job Search Results

152 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:01PM Pacific Time by ContractJobHunter. )

Listings 1 - 152

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Composites Lab Technician, Fort Worth, TX

Description:
Composites Lab Technician, Fort Worth, TX
JR-018165

You will report to the onsite Engineering Manager. Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
• Lay up, bagging, and curing of composite and metal bonded panels; including setting running an autoclave.
• Machining, drilling, trimming and end tabbing of composite test specimens.
• Adhesive bonding with both paste and film adhesives, apply primers.
• Setting up and performing mechanical tests on various test coupon configurations; mechanical testing to include both static and fatigue tests, with and without strain gauges or extensometers, over wide range of temperatures.
• Conduct Destructive Testing & Evaluation of different production aircraft components and write summary technical report of the findings and conclusions.
• Lead mini projects (Test Requests) through all stages to completion; interfacing with the customer when needed.

Education:
Associates Degree in Engineering, Engineering Technology, Materials Science, Manufacturing Technology, Mechanical Engineering or FAA A & P Certification.

You'll Need:
• Have a mechanical aptitude
• Technical knowledge of the application of adhesives, sealants, primers and composites.
• Perform composite layup, bagging and curing, machining, bonding, and including the ability to run an autoclave.
• use all equipment commonly used for composite specimen preparation (oven, grinder, drill press, cutting machine, band saws, platen press)
• Have a working knowledge of mechanical testing using automated equipment and data acquisition systems.
• Have above average level of technical writing abilities and demonstrate ability to use advanced computer software tools.
• Read and interpret material and process specifications computerized drawings and associated parts lists.
• Years of aerospace related composite experience required 3+

Citizenship: US Citizenship required

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018165
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer III

Description:
Must-haves:
• Bachelor's of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 6 or more years of relevant experience
• Knowledge of engineering principles and practices
• Understanding of Computer Aided Engineering tools and Finite Element Analysis (FEA)
• Experience working in multi-disciplinary design and development teams
• Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
• Proficient with MICROSOFT Tools: EXCEL, WORD, POWERPOINT, VISIO,
• Knowledgeable with IBM Rational Dynamic Object Oriented Requirements Management System (DOORS), JIRA, MagicDraw, and MATLAB

Preferred:
• Exposure to Engineering Simulation such Computational Fluid Dynamics (CFD) and Thermal Analysis using tools such as StarCCM or CFD++.
• Understanding of aircraft external loads, aircraft performance and stability and control.
• Familiarity with wind tunnel and aircraft flight test.
• Background in the Aerospace and Defense Industry
• Understanding of system-level static and dynamic modeling snd simulation
• Exposure to aircraft stability principles and control system design and analysis
• Knowledge of industry standard aerospace principles, to include, but not limited to parametric design, model-based definition, fundamentals of flight mechanics
• Certification in International Council on Systems Engineering (INCOSE) is preferred but not required.
• The ability to obtain and maintain a Security Clearance may be required. Learn more about the background check process for Security Clearances


The Structures Company is an AA/EOE.
 
Job Number: 418
Job Location: Huntsville, AL
Rate: $57-$60/Hr. ***DOE***
Per Diem: Yes
Duration: Long Term Contract OR Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician, Fort Worth, TX - JR-019361

Description:
Engineering Technician, JR-019361
Fort Worth, TX

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Engineering Technician Tasks Include:
• Accountable for construction, assembly, installation, checkout and operation of different test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.
• Build and test aircraft components, fixtures and tooling required to conduct tests.
• Work with test engineers, laboratory technicians and test support groups. Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Work with personnel in other laboratories.
• Work with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and different other departments.
• Ensure safe operations and testing of structural assemblies and parts
• You'll Need: Read and understand mechanical drawings, reports, specifications and engineering instructions to make, assemble, build, operate and repair test machines.
• Familiar with MS Office – Word, Excel, and Power Point and computer knowledge
• Able to lift 50 pounds.
Position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). Must be U.S. persons within the meaning of ITAR.
Years of Experience: 3+ yrs minimum Required
Education: Associate Degree in Engineering (Mechanical) - Preferred
Industry: Aerospace (Aircraft A&P license) Mechanical, Military services
Citizenship: US National (Citizen)

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019361
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Description:
Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver many end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Responsibilities:
• Conduct complex fatigue and damage tolerance analysis for metallic components of helicopter rotor, airframe and drive system structures and prepare certification reports
• Conduct and document crack growth analysis validation using test results for inclusion in certification reports
• Conduct reviews of analyses prepared by the engineering team to meet the FAA approved Helicopter methodologies for the ODA EFUM to review and approve
• Guide engineers as they learn to conduct the fatigue and damage tolerance analyses for Helicopter certification
• Conduct and document material coupon testing for fatigue and crack growth properties of various metals
• Contribute to the completion of milestones associated with specific projects (completion of analysis and reporting of results and FAA approvals)
• Use engineering methods and tools such as NASGRO, AFGROW, ANSYS, NASTRAN / PATRAN and a balance of classical hand calculations to analyze high performance rotor, drives and airframe structures.

You'll Need:
Skills:
• High level of proficiency in Fatigue and Damage Tolerance
• Experience in Helicopter analysis
• Experience with NASGRO and/or AFGROW
• Have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint).
• Good oral and written communication skills

Education: BS in Mechanical, Aerospace Engineering, Math or related science degree or MS in Mechanical, Aerospace Engineering, Math or related science degree required. PhD also is considered.

Experience: Aerospace Rotorcraft – fatigue and damage tolerance analysis - 10+ yrs REQUIRED

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018472
Job Location: Fort Worth, TX
Input Date: 01/04/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Ypsilanti, Michigan.

Job Duties:
Coordinate efficient and economical maintenance operations by providing technical assistance to guide personnel during maintenance and troubleshooting.
Ensure that maintenance activities are conducted in compliance with General Maintenance Manual (GMM), various company manuals, and FAR’s.
Maintain and issue control numbers, and complete required paperwork, for Deferred Maintenance Items / Minimum Equipment List. (DMI/MEL), Configuration Deviation List (CDL) and Carryover Items (COI).
Maintain the current DMI/MEL, CDL, COI status in the MISA database for tracking and communication.
Perform other duties as assigned by the Maintenance Control Manager.
Qualifications:
High school graduate; some college and/or technical school desirable
Good working knowledge of world geography and flight operations required
Must have an valid A&P License
Experience working heavy transport aircraft (preferably 747-200 and 400 aircraft)
Ability to use and understand wiring diagrams, maintenance manuals, troubleshooting manuals and parts manuals
Good computer skills and verbal communication skills
Maintenance Control experience is preferable but not required
Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34701
Job Location: Ypsilanti, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Jennifer Piotroski
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34535
Job Location: Oscoda, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Anthony Mengarelli
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Integrated Avionics experience required
Requirements development, integration, testing, supplier management experience required
Aircraft testing, troubleshooting experience preferred
ARP-4754 experience preferred
 
Job Number: 20-155383
Job Location: GA
Rate: $68.00 per hour
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of aircraft products and services

Unique Skills
• Integrated Avionics experience required
• Requirements development, integration, testing, supplier management experience required
• Aircraft testing, troubleshooting experience preferred
• ARP-4754 experience preferred

Education and Experience Requirements
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-438
Job Location: Savannah, GA
Rate: $65-$68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Seeking avionics technicians with wire harness & LRU fabrication, integration, and functional check out experience on live aircraft Preferred.

IPC 620 / IPC-J-STD001 and J standard certification with pin out, soldering, crimping, solder sleeve experience, continuity checks, and troubleshooting on aircraft.




The Structures Company is an AA/EOE.
 
Job Number: 408
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Tucson, Arizona.

Job Duties:
Adhere to MHI General Work Requirements
Comply with environmental health / safety policies and procedures.
Participate in 5-S activities.
Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Ideal Candidate:
You have an A Certification
You have avionics / electric A/C Technical School or other substantiated equivalent
You have typically 0 – 2 years avionics work experience or substantiated equivalent experience
You have the ability to read and understand electrical engineering drawings
You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
You have your own basic set of hand tools with the ability to demonstrate inventory and control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You must be able to work unscheduled overtime including non scheduled work days and holidays
You must be able to work in seasonal/inclement weather outside
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35319
Job Location: Tucson, AZ
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Johnny Cruz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Elec Systems Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Unique Skills:
Avionics development and integration experience required. 25.981 analysis experience preferred.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-420
Job Location: Savannah, GA
Rate: $64 - $68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Perform preliminary and detail design of composite airframe structures, structure layout and design for manufacturability.
Experience designing composite primary aircraft structures utilizing Catia v5 is a MUST.
CPD/Composites Workbench experience is a huge plus.
Fibersim is acceptable if no CPD experience.
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $65-75/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
***LONG TERM CONTRACT OR CONTRACT TO HIRE***
MUST be U.S. Citizen

Electrical engineers will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft. Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.


Must-haves:

• Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 3 or more years of relevant experience
• Knowledge of engineering principles and practices
• Experience with Computer Aided Engineering tools
• Familiarity with working in multi-disciplinary design and development teams
• The ability to obtain and maintain a Secret U.S. Security Clearance.

Preferred:

• Exposure to simulations through functional and logical models and system analysis
• Background in the Aerospace and Defense Industry
• Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
• Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)
• Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
• Understanding of Electro Magnetic Effects (EME) to include Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
• Experience in digital or analog circuit design and schematic capture
• Understanding of the printed circuit board layout process and tools
• Experience with FAA and/or Military aircraft certification programs



The Structures Company is an AA/EOE.
 
Job Number: 413
Job Location: CO
Rate: $32-$48/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 12+ MONTHS OR CTOH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Engineer

Description:
**REMOTE TO START**

Seeking an experienced Electromechanical Engineer to take ownership of research, design, develop, and/or test automated equipment. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.


Duties/Responsibilities:
 Designs and develops electromechanical systems used in the automation of industrial tasks.
 Plans, develops, and implements advanced precision equipment for assigned applications.
 Analyzes manufacturing and development processes, identifying opportunities for automation, modifications, and improvements.
 Identifies electromechanical add-ons and improvements available for existing devices and processes; recommends and facilitates upgrades.
 Conducts research and analysis to determine the feasibility, costs, and performance benefits of electromechanical equipment or enhancements.
 Researches options for sensors, communications technologies, and control devices, selecting and recommending the best option for each project; verifies the proper function of chosen devices.
 Identifies and selects materials appropriate for each electromechanical system design.
 Models, tests, builds, and/or implements electromechanical and automated design solutions.
 Applies electromechanical/automated solutions to the production, development, or transfer of components, finished goods, or other materials.
 Evaluates finished products; identifies and facilitates additional improvements and modifications.
 Drafts and maintains design documentation for parts, assemblies, and finished products.
 Maintains logs, records, files, and other documentation related to technical aspects of projects.
 Provides training and consultation on electromechanical and automated processes and equipment.
 Performs other related duties as assigned.


Required Skills/Abilities:
 Excellent analytical and problem-solving skills with a proven ability to apply mechanical and electrical engineering theories, practices, and procedures to automate products and processes.
 Excellent verbal and written communication skills.
 Excellent organizational skills and attention to detail.
 Proficient with computer-assisted design (CAD) software.
 Proficient with Microsoft Office Suite or related software.


Education and Experience:
 Bachelor’s degree in Engineering or related field required.
 At least three years of related work experience preferred.




The Structures Company is an AA/EOE.
 
Job Number: 421
Job Location: CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: CtoH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer - Special Missions

Description:
Unique Skills:
Candidate to be experienced in Catia V4, Smarteam Databases. Catia V4 experience preferred. Prior Gulfstream SM experience is desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12551
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Data Operations / Instrumentation Engineer, Fort Worth, TX

Description:
Flight Test Data Operations / Instrumentation Engineer, Fort Worth, TX

JR-020534

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.


This position is responsible to provide engineering support to flight test & evaluation aircraft development programs, including: flight test data center computer systems, mission control telemetry rooms, deployment of offsite mission control rooms for offsite flight test data processing, data processing troubleshooting, and data center computer equipment upgrades and system integration. The position will also support Flight test Instrumentation for development and testing of experimental aircraft. You will be working in a team environment as you lead the instrumentation effort and support initial test operations within established flight test guidelines to achieve safe flight operations.

You Will:
• Provide Flight Test Data Center computer and sub-system hardware support 24/7
• Integrate new technologies for Flight Test Data Systems
• Work closely with software development team to validate and troubleshoot changes to data acquisition software.
• Troubleshoot a variety of real-time and post-flight data acquisition issues
• Data Center Computer System Configuration Control and System Administration
• Provide support for Offsite Flight Test Data acquisition activity to include offsite deployment planning, and setup/configuration of offsite computer systems, network link to offsite location, voice communications, offsite GPS station, offsite weather station, etc.
• Coordinate with IT on network architecture issues and offsite network solutions
• Develop, update, and maintain engineering documentation, to build a working repository of common support tasks.
• Develop group work instructions and train Data Operations personnel

Flight test instrumentation Responsibilities include:
• Design, implement, and maintain instrumentation Airborne Data Acquisition Systems (ADAS) used to condition, monitor, and record data for test objectives.
• Provide direction to Flight Test Instrumentation Technicians, Electricians, Mechanics
• Collaborate with internal disciplines, including Flight Test Hardware Integration Engineers, Flight Test Engineers, Flight Technology, Instrumentation Labs, Standards and Calibration, Aircraft Coordinators, etc.,
• Generate and update electrical drawings through CAD software

You Will Need:
• Relevant working experience with PCM data acquisition systems
• Relevant working knowledge of network protocols and network architecture
• Working experience with OpenVMS system administration
• Knowledge in the following instrumentation sensor applications: strain gages, accelerometers, pressure transducers, thermocouples, RTDs, pitot-static systems, etc.,
• Familiarity with following bus formats: 1553-B, ARINC-429, RS-232/422/485
• Familiarity with airborne data acquisition systems (Teletronics, Zodiac, Quasonix equipment a plus)
• Ability to read and understand electrical drawings
• Familiarity with AutoCAD, Draftsight, or equivalent software for creating, modifying or updating electrical drawings.
• Proficiency with Microsoft Office Software Suite (Word, Excel, PowerPoint, Outlook, Access, Project)

Education: BS Electrical / Electronics / Computer sciences / Instrumentation engineering or MS BS Electrical / Electronics / Computer sciences / Instrumentation engineering

Experience: Minimum 3 to 5 years’ experience in Aerospace field required. (Experience in Flight Test Instrumentation is a plus)

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-020534
Job Location: Fort Worth, TX
Input Date: 01/14/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineers

Description:
Required:
1.Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
2.Advanced knowledge and experience with MSC Nastran and Patran (10 years)
3.Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
4.Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

Email resume to: mmccarthy@pdstech.com or call: 314-504-6039
 
Job Number: Loads-Gulf
Job Location: Savannah, GA
Rate: $70.00-$77.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter and Dynamic Loads Engineer

Description:
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
Advanced knowledge and experience with MSC Nastran and Patran (10 years)
Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

As an Engineering Contractor in Flutter & Dynamic Loads, you will:
Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios
Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions.
Document completed analysis and findings in Engineering Reports for aircraft Certification.
Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups.

What you'll bring to the team:
Extensive knowledge of aircraft aeroelasticity principles and concepts
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling
Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis
Experience with preparation for and execution of aircraft ground vibration tests
Experience with preparation for and execution of aircraft flight flutter testing
Experience with aeroservoelasticity is a plus
Advanced knowledge and experience with MSC Nastran and Patran
Knowledge and experience with Matlab and/or Python for analytical and post test data processing
Knowledge and experience with one or more commercial or NASA CFD analysis toolsets
Knowledge and experience with Unix and/or Linux
Strong verbal and written communication skills, with prior experience in a project leadership role.
An ability to clearly and concisely convey technical concepts to all technical and/or management levels
Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations
Advanced degree in Aerospace Engineering strongly preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-436
Job Location: Savannah, GA
Rate: $70 - $77/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/24/2020
Last Updated: 12/08/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter and Loads Engineer

Description:
Required: 1. Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years) 2. Advanced knowledge and experience with MSC Nastran and Patran (10 years) 3. Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years) 4. Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years) As an Engineering Contractor in Flutter & Dynamic Loads, you will: • Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios. • Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions. • Document completed analysis and findings in Engineering Reports for aircraft Certification. • Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups. What you'll bring to the team: • Extensive knowledge of aircraft aeroelasticity principles and concepts • Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification • Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling • Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis • Experience with preparation for and execution of aircraft ground vibration tests • Experience with preparation for and execution of aircraft flight flutter testing • Experience with aeroservoelasticity is a plus • Advanced knowledge and experience with MSC Nastran and Patran • Knowledge and experience with Matlab and/or Python for analytical and post test data processing • Knowledge and experience with one or more commercial or NASA CFD analysis toolsets • Knowledge and experience with Unix and/or Linux • Strong verbal and written communication skills, with prior experience in a project leadership role. • An ability to clearly and concisely convey technical concepts to all technical and/or management levels • Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations • Advanced degree in Aerospace Engineering strongly preferred
 
Job Number: 20-155150
Job Location: GA
Per Diem: $77
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Knowledge / Records Management

Description:
Description:

Purpose of Job: International Military Sustainment Support Team is looking for an Analyst to support the Aftermarket Spares process. The employee will be responsible for working with Operations to prioritize approximately 2,000 parts required in support of multiple sustainment contracts. Part number mods, unqualified parts, and allocation with production/aircraft demands will increase difficulty to support DTC / revenue plans. This position offers a great opportunity to get insight into the business by working with various departments and provides exposure to a wide variety of topics. Role and responsibilities can expand over time.

Assigned Duties include but are not limited to:
• Burndown of approximately 2,000 part numbers
• Alignment of schedules on parts requiring manual planning work and alignment
• Work with supply chain to prioritize PR’s
• Work with Delivery Assurance to prioritize deliveries
• Participate in daily/weekly supplier meetings with Delivery Assurance and Supply Chain
• Work with appropriate Ops and Programs leads and analysts to prioritize and track “make” parts
• Identify gaps/capacity restrictions resulting in allocation decisions
• Report out weekly and work with Programs on risk identification, risk reduction plans, performance to burndown of need

This project will require thousands of SAP transactions to occur, as well as significant follow up across the operations team and alignment and communication with programs.

Skills and Experience

- High level of data analysis and reporting experience
- Working knowledge of MS Excel
- MS PowerPoint
-Excellent communication skills
-Detail oriented
-Analytical thinking
-Problem solver

- Previous experience with SAP a plus but not requirement.

Education: Bachelor Degree
 
Job Number: 132571
Job Location: Stratford, CT
Rate: 21.57
Per Diem: Possible
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
A Mechanical Systems Design Engineer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for supporting the design, development, and test of launch vehicle mechanical systems. To be considered for this role, you will have a Bachelor's degree in an Engineering discipline, and five years of experience designing Aerospace or equivalent type mechanical system elements within aircraft, spacecraft, or launch vehicles.

Mechanical Systems Design Engineer Job duties:

* Participate in the entire design cycle of mechanical subsystems, including conceptual and detailed design, trade studies, structural analysis, development testing and qualification
* Generate 3-D models, component drawings, assembly drawings, and interface control documents with application of GD&T per ASME Y14.5
* Create documentation for assembly and testing of development and flight hardware
* Participate in subsystem level testing including planning, execution, data reduction and analysis
* Develop component specifications, manage suppliers, provide manufacturing and production support

Qualifications:

* Strong mechanical design and integration skills using 3D modeling tools (CREO preferred)
* Experience in Creo (Pro-E) piping and routed system tools
* Experience in Creo (Pro-E) kinematic mechanism design or other mechanism analysis tools
* Experience in structural FEA using ANSYS, NASTRAN or similar tools
* Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

If you are interested in this Mechanical Systems Design Engineer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 305374
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Scheduler

Description:
Seeking a first rate, highly qualified Project scheduler and planner to support a variety of programs and projects including vehicle test, modification, sustaining activities and new product development. The Project scheduler and planner will work closely with the project team(s) and Program Management Office to develop, maintain, and execute their project plans. This is an excellent, exciting opportunity for a motivated, experienced individual with proven hands-on experience in producing and maintaining engineering and or manufacturing plans for aircraft design, development and support.

Your Mission
• Organize, create, and maintain project schedules to support Programs, and other identified projects in accordance with Project Management Office (PMO) best practices and guidelines.
• Assist project team(s) in tasks and sub tasks set up to ensure satisfactory realization of project requirements as scheduled to support Program, and overall objectives/goals.
• Support PMO performance metrics by adhering to Program WBS guidance, as documented in WBS Guidelines and Earned Value Management.
• Support PMO and project team(s) by monitoring scopes of work using Program aligned WBS for control and integrity.
• Interact with PMO and project team(s) to schedule work and coordinate resource assignments.
• Support PMO and Supply Chain by interacting with project team(s), Team Leads (scope owners), and CE to define scope of work to develop and update detailed schedules, cost information and identification of variances from original plan.
• Support PMO by evaluating schedule(s) progress and performance, and identify developing problem areas.
• Support Program and project team(s) by monitoring schedule progress, including identifying critical activities and reviewing forecasts and progress achieved to date. Analyze critical path and constraints to determine effect of changes to schedule and recommend work-around.
• Develop and update weekly short interval work plans for project team(s).
• Track baselines, perform what-if analysis, and develop mitigation plans to support Program.
• Support PMO by documenting all changes to cost and schedule, reporting variances to PBM.
• Support PMO by assisting project team(s) in maintaining monthly (or as requested by PMO) status reports to keep management informed on project progress.
• Support PMO in conducting analysis to determine alternative courses of action or recovery on slipped schedules and or deadlines.
• Support PMO and project team(s) by ensuring accuracy of schedules
• Effectively interact with PMO, CE, project team(s), Team Leads, Supply Chain, and Finance when required.
• Additional tasks as required.


What You Bring
• Advanced knowledge regarding the effective integration of schedule and cost in an EVMS environment
• Experience with products built during the planning processes [e.g., IMP, IMS, Product Breakdown Structure (PBS), Work Breakdown Structures (WBS)]
• Proficiency in Microsoft Office applications (Word, Excel, PowerPoint)
• Advanced MS Project skills (Resource loading/tracking, basic requirements for earned value, progress tracking, variance analysis, critical path review and analysis)
• Ability to work without supervision to lead the development of program plans and schedules for multiple programs concurrently
• Strong facilitation skills and the ability to proactively communicate with all levels of management
• Ability to motivate and influence others, build effective interpersonal relationships, and be able to foster and contribute to a positive and productive team environment
• Demonstrate flexibility and adaptability in work style to better respond to multiple requests and handle sudden changes in priorities
• Ability to embrace and participate in change initiatives
• Excellent follow through and persistence
• Due to export control regulations this role is open to U.S. citizens only
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Education Requirements
Bachelor's degree and 5+ years applicable experience relative to Program Planning and Scheduling using MS Project. Experience in manufacturing and or aerospace scheduling/planning desired, but not required


The Structures Company is an AA/EOE.
 
Job Number: 425
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Inspector

Description:
A Quality Assurance Inspector job in Colorado Springs, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for inspecting aircraft systems, production components, and support fulfilling all contractual and quality requirements, and support the design and creation of the most groundbreaking aerospace and defense technologies. To be considered for this role, you will need a High School Diploma or GED equivalent and at least 5 years of relevant experience. This is a great contract opportunity with a growing company. An active Secret U.S. Security Clearance required.

Quality Assurance Inspector Job duties:

* Verify aircraft installed systems, logistics operations, production components, and support functions fulfilling all contractual and quality requirements.
* Visually inspecting operational components for serviceability and proper installation, validating Field Service Technician's work, developing and reviewing operational procedures, and function as the on-site Aviation Safety Official.
* Ability to understand and interpret technical schematics and documents
* Basic understanding of electrical wiring concepts
* Working knowledge of Microsoft Office and Adobe Products
* FAA Airframe and Power Plant License
* An active Secret U.S. Security Clearance required

Qualifications:

* High school diploma or GED equivalent and at least 5 years of relevant experience
* Knowledge and ability to interpret geometric dimensioning and tolerance
* Experience drafting work instructions and SOP's
* Experience with Network+, Security+, CCNA and/or A+
* Experience with FCC or FCC GROL
* Basic understanding of Spectrometer, Oscilloscope and/or other measuring equipment
* Working knowledge of ISO 9000 and AS 9100 standards

If you are interested in this Quality Assurance Inspector job in Colorado Springs, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 305457
Job Location: Colorado Springs, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of aircraft products and services

Unique Skills
• Proficient with the utilization of Simulink in a real time simulation environment
• Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
• Aircraft system simulation experience
• Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
• Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
• Rectifying lab problem reports issues through troubleshooting, solution development and implementation
• Responsible for satisfying lab customer questions and/or test assistance
• Ability to read aircraft/simulation electrical drawings
• Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
• Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
• Troubleshooting lab simulation hardware/software and connected auxiliary test equipment

Education and Experience Requirements
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-439
Job Location: Savannah, GA
Rate: $65-$75/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation and Software Engineer

Description:
- Proficient with the utilization of Simulink in a real time simulation environment
- Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
- Aircraft system simulation experience
- Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
- Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
- Rectifying lab problem reports issues through troubleshooting, solution development and implementation
- Responsible for satisfying lab customer questions and/or test assistance
- Ability to read aircraft/simulation electrical drawings
- Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
- Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
- Troubleshooting lab simulation hardware/software and connected auxiliary test equipment
 
Job Number: 20-155470
Job Location: GA
Rate: $75.00 per hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Verification Engineer

Description:
A Sr. Systems Verification Engineer job in San Antonio, TX is currently available through Belcan with one of our key aerospace clients in support of prestigious aircraft systems retro-fit/overhaul. In this role, you will be responsible for collaborating with all Systems Engineers and other IPTs (Integrated Product Teams) in accomplishing project task. You will also be responsible for coordination of technical efforts in accordance with the SE project SOW, CDRLs, the project IMP, engineering standard work, and the project IMS. To be considered for this role, you will have a Bachelor's degree Engineering plus a minimum of 10 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Systems Verification Engineer Job duties:

* Requirements Management, Risk Management, System Integration and Issue Resolution, Verification Planning, compliance gap closure, and requirements traceability.
* Support the Chief System Engineer (CSE) and the SE Technical Lead in execution of compliance updates to the subsystem specifications to provide traceability to the Air Vehicle Specification.
* Work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Responsibilities include creating and presenting technical data and metrics, and representing the project in meetings with leadership.

Qualifications:

* This job requires an understanding of the operation and interrelationships of aircraft systems; an appreciation for the impact that configuration or requirements changes may have on performance related attributes, cost and schedule.
* The individual should have experience and a strong understanding of Earned Value Management (EVM).
* The individual will need to be able to work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Experience and proficiency with requirements management tools such as DOORS is preferred.

If you are interested in this Sr. Systems Verification Engineer job in San Antonio, TX, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 303642
Job Location: San Antonio, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/24/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job in Kent, WA is currently available through Belcan with one of our Aerospace clients. You will be responsible for structural loads, dynamics and analysis of vehicles which will land people and payloads on the Moon. You will also perform finite element analysis at the vehicle and component levels, design optimization, structural testing, and verification. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Aerospace or Civil Engineering. This is a great contract opportunity with a great company.

Structural Analyst Job duties:

* Analysis of primary and secondary spacecraft structures
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies

Qualifications:

* Minimum of a B.S. degree in Mechanical, Aerospace or Civil engineering
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* 7+ years of experience with aircraft, spacecraft, launch vehicle, or automotive in some of the following areas: External loads; Vibro-acoustic analysis; Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Optistruct
* Vehicle load path definition and strength analysis desired
* Analysis of metallic and/or composite structures (skin-stringer, fittings, sandwich panels, etc.)
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Structural Analyst job in Kent, WA, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 305517
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer II

Description:
A Structural Engineer II job in Englewood, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance required

Structural Engineer II Job duties:

* Examine complex metallic and composite structures and systems
* Familiarity with aircraft structure/construction
* Familiarity with industry standard analytical methods (Niu, Bruhn, etc.)
* Experience in both classical structural analysis and finite element analysis of metallic and composite aircraft primary and secondary structure
* Ability to prioritize workloads and show flexibility to changing situations / demands
* Ability to communicate with all levels of management, customers, and individual contributors

Qualifications:

* Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience
* Demonstrate working knowledge of regulatory and applicable airworthiness criteria including Mil-hdbk-516C and/or 14 CFR Part 25 and Part 23
* Knowledge and experience of aircraft modification programs
* Experience in damage tolerance analysis of metallic aircraft structure
* Experience with MSC Patran/Nastran or Siemens Femap/NX Nastran
* Solidworks and/or CATIA experience. Understands Product Lifecycle Management
* Experience in Structural Dynamics/Vibration analysis
* Experience with narrow body transport category aircraft
* Experienced in execution of government contracts
* Experience in integrating mission systems across a wide variety of primary/secondary structure
* Experience in VBA programming

If you are interested in this Structural Engineer II job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 305460
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Back to Advanced Job Search