Job Search Results

152 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/11/29 Sunday 02:49AM Pacific Time by ContractJobHunter. )

Listings 1 - 152

Go To My Job Tracker

Expand all descriptions

3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 11/25/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Composites Lab Technician, Fort Worth, TX

Description:
Composites Lab Technician, Fort Worth, TX
JR-018165

You will report to the onsite Engineering Manager. Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
• Lay up, bagging, and curing of composite and metal bonded panels; including setting running an autoclave.
• Machining, drilling, trimming and end tabbing of composite test specimens.
• Adhesive bonding with both paste and film adhesives, apply primers.
• Setting up and performing mechanical tests on various test coupon configurations; mechanical testing to include both static and fatigue tests, with and without strain gauges or extensometers, over wide range of temperatures.
• Conduct Destructive Testing & Evaluation of different production aircraft components and write summary technical report of the findings and conclusions.
• Lead mini projects (Test Requests) through all stages to completion; interfacing with the customer when needed.

Education:
Associates Degree in Engineering, Engineering Technology, Materials Science, Manufacturing Technology, Mechanical Engineering or FAA A & P Certification.

You'll Need:
• Have a mechanical aptitude
• Technical knowledge of the application of adhesives, sealants, primers and composites.
• Perform composite layup, bagging and curing, machining, bonding, and including the ability to run an autoclave.
• use all equipment commonly used for composite specimen preparation (oven, grinder, drill press, cutting machine, band saws, platen press)
• Have a working knowledge of mechanical testing using automated equipment and data acquisition systems.
• Have above average level of technical writing abilities and demonstrate ability to use advanced computer software tools.
• Read and interpret material and process specifications computerized drawings and associated parts lists.
• Years of aerospace related composite experience required 3+

Citizenship: US Citizenship required

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018165
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer III

Description:
Must-haves:
• Bachelor's of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 6 or more years of relevant experience
• Knowledge of engineering principles and practices
• Understanding of Computer Aided Engineering tools and Finite Element Analysis (FEA)
• Experience working in multi-disciplinary design and development teams
• Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
• Proficient with MICROSOFT Tools: EXCEL, WORD, POWERPOINT, VISIO,
• Knowledgeable with IBM Rational Dynamic Object Oriented Requirements Management System (DOORS), JIRA, MagicDraw, and MATLAB

Preferred:
• Exposure to Engineering Simulation such Computational Fluid Dynamics (CFD) and Thermal Analysis using tools such as StarCCM or CFD++.
• Understanding of aircraft external loads, aircraft performance and stability and control.
• Familiarity with wind tunnel and aircraft flight test.
• Background in the Aerospace and Defense Industry
• Understanding of system-level static and dynamic modeling snd simulation
• Exposure to aircraft stability principles and control system design and analysis
• Knowledge of industry standard aerospace principles, to include, but not limited to parametric design, model-based definition, fundamentals of flight mechanics
• Certification in International Council on Systems Engineering (INCOSE) is preferred but not required.
• The ability to obtain and maintain a Security Clearance may be required. Learn more about the background check process for Security Clearances


The Structures Company is an AA/EOE.
 
Job Number: 418
Job Location: Huntsville, AL
Rate: $57-$60/Hr. ***DOE***
Per Diem: Yes
Duration: Long Term Contract OR Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician, Fort Worth, TX - JR-019361

Description:
Engineering Technician, JR-019361
Fort Worth, TX

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Engineering Technician Tasks Include:
• Accountable for construction, assembly, installation, checkout and operation of different test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.
• Build and test aircraft components, fixtures and tooling required to conduct tests.
• Work with test engineers, laboratory technicians and test support groups. Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Work with personnel in other laboratories.
• Work with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and different other departments.
• Ensure safe operations and testing of structural assemblies and parts
• You'll Need: Read and understand mechanical drawings, reports, specifications and engineering instructions to make, assemble, build, operate and repair test machines.
• Familiar with MS Office – Word, Excel, and Power Point and computer knowledge
• Able to lift 50 pounds.
Position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). Must be U.S. persons within the meaning of ITAR.
Years of Experience: 3+ yrs minimum Required
Education: Associate Degree in Engineering (Mechanical) - Preferred
Industry: Aerospace (Aircraft A&P license) Mechanical, Military services
Citizenship: US National (Citizen)

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019361
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Aerospace Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Description:
Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver many end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Responsibilities:
• Conduct complex fatigue and damage tolerance analysis for metallic components of helicopter rotor, airframe and drive system structures and prepare certification reports
• Conduct and document crack growth analysis validation using test results for inclusion in certification reports
• Conduct reviews of analyses prepared by the engineering team to meet the FAA approved Helicopter methodologies for the ODA EFUM to review and approve
• Guide engineers as they learn to conduct the fatigue and damage tolerance analyses for Helicopter certification
• Conduct and document material coupon testing for fatigue and crack growth properties of various metals
• Contribute to the completion of milestones associated with specific projects (completion of analysis and reporting of results and FAA approvals)
• Use engineering methods and tools such as NASGRO, AFGROW, ANSYS, NASTRAN / PATRAN and a balance of classical hand calculations to analyze high performance rotor, drives and airframe structures.

You'll Need:
Skills:
• High level of proficiency in Fatigue and Damage Tolerance
• Experience in Helicopter analysis
• Experience with NASGRO and/or AFGROW
• Have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint).
• Good oral and written communication skills

Education: BS in Mechanical, Aerospace Engineering, Math or related science degree or MS in Mechanical, Aerospace Engineering, Math or related science degree required. PhD also is considered.

Experience: Aircraft – fatigue and damage tolerance analysis Preferred (10+ yrs required)

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018472
Job Location: Fort Worth, TX
Input Date: 11/25/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Email: elizabeth.stoddard@cyient.com
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Ypsilanti, Michigan.

Job Duties:
Coordinate efficient and economical maintenance operations by providing technical assistance to guide personnel during maintenance and troubleshooting.
Ensure that maintenance activities are conducted in compliance with General Maintenance Manual (GMM), various company manuals, and FAR’s.
Maintain and issue control numbers, and complete required paperwork, for Deferred Maintenance Items / Minimum Equipment List. (DMI/MEL), Configuration Deviation List (CDL) and Carryover Items (COI).
Maintain the current DMI/MEL, CDL, COI status in the MISA database for tracking and communication.
Perform other duties as assigned by the Maintenance Control Manager.
Qualifications:
High school graduate; some college and/or technical school desirable
Good working knowledge of world geography and flight operations required
Must have an valid A&P License
Experience working heavy transport aircraft (preferably 747-200 and 400 aircraft)
Ability to use and understand wiring diagrams, maintenance manuals, troubleshooting manuals and parts manuals
Good computer skills and verbal communication skills
Maintenance Control experience is preferable but not required
Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34701
Job Location: Ypsilanti, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Jennifer Piotroski
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 4 Aircraft Mechanic II - Structural's located in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM
 
Job Number: 185625
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Structura

Description:
PDS Tech, Inc. is seeking an Aircraft Assembly Technician in Jacksonville, FL

Summary:

  • This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
  • Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

  • High School Diploma or GED
  • Minimum 5 years of aircraft structural repair
     


 
 
Job Number: 2010113857
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnwyQAC&URLSource=cjhunter

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 8 Aircraft Mechanic II's - Structural located in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

 
Job Number: 186460
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painter

Description:
Aircraft Painter

Job ID # 2020-11724

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

 

What You’ll Do:

Coat surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.
Smooth surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.
What You’ll Need:

Must have High Gloss Paint Experience.
C-130 or Military Aircraft Paint Experience a Plus
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11724
Job Location: Greenville, SC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 3 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aircraft Sheetmetal Technician

Description:
At PDS TECH our employees work together to evolve mobility worldwide - one good idea at a time. If you have a good idea, we’ll provide the environment where it will thrive and grow into a great product or customer experience. Your ideas are our fuel. 
In your role, you will:
  • Troubleshoot, inspect, and perform maintenance on customer aircraft sheet metal components and hydraulics in accordance with applicable technical data and FAA/JAA regulations.
  • This position is designated for the Regional Aircraft service center.

Qualifications
As our ideal candidate,
  • You have a FAA Airframe license desired but not required
  • You have experience working on regional aircraft is desired but not required
  • You have basic knowledge of reading and interpreting aircraft blueprints, drawings, diagrams, and manuals
  • You have basic knowledge of aircraft systems
  • You have basic knowledge of manuals necessary to perform job including, but not limited to, SR Maintenance Manual and Component Installation Manuals, System Manual, Maintenance Manuals, Standard Operating Procedures (SOP) and various technical information necessary to perform job
  • You have basic knowledge of the differences between repair station, developmental and production engineering, and corresponding paperwork
  • You have basic knowledge of maintenance manuals, parts catalog, and applicable FAA documents
  • You have basic knowledge in fabrication of sheet metal and/or composite components and assemblies, aircraft parts and ground support equipment per engineering drawings, sketches, advance designs, specifications and/or verbal instructions
  • You have the skill to measure using a variety of basic and physical measuring devices
  • You have the skill to use basic hand tools necessary to perform job
  • You have the skill to operate ground support equipment as necessary to perform job
  • You have the skill to fabricate and/or assemble various detail parts and components
  • You have the skill to measure using a variety of basic and precision measuring devices relating to job function
  • You have the skill to fabricate and install structural modifications on aircraft
  • You have the skill to apply sealing compounds
  • You have the skill to operate basic sheet metal support equipment including, for example, brake and shear         
  • You have the skill to repair composite structures per structural and repair manuals as required by site


HS or GED 
Valid Drivers License
Tools
  • Tools must be etched.  This can be done on site after start, but it is preferred that this is done prior to start when possible.
  • Their tools also need to be etched: first initial of their first name, first initial of their last name, and last 4 of their SSN.  If their tools are already etched, they can use them as is.
  • No tool shadowing required
  • Tool lists for each skill is provided

 
Job Number: 2010116503
Job Location: Tucson, AZ
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OyccQAC&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Systems Engineers -- Many new long term programs in Missouri

Description:
Systems Engineers with avionics or software; DOORS or Rhapsody needed

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34535
Job Location: Oscoda, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Anthony Mengarelli
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Integrated Avionics experience required
Requirements development, integration, testing, supplier management experience required
Aircraft testing, troubleshooting experience preferred
ARP-4754 experience preferred
 
Job Number: 20-155383
Job Location: GA
Rate: $68.00 per hour
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of aircraft products and services

Unique Skills
• Integrated Avionics experience required
• Requirements development, integration, testing, supplier management experience required
• Aircraft testing, troubleshooting experience preferred
• ARP-4754 experience preferred

Education and Experience Requirements
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-438
Job Location: Savannah, GA
Rate: $65-$68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Seeking avionics technicians with wire harness & LRU fabrication, integration, and functional check out experience on live aircraft Preferred.

IPC 620 / IPC-J-STD001 and J standard certification with pin out, soldering, crimping, solder sleeve experience, continuity checks, and troubleshooting on aircraft.




The Structures Company is an AA/EOE.
 
Job Number: 408
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Tucson, Arizona.

Job Duties:
Adhere to MHI General Work Requirements
Comply with environmental health / safety policies and procedures.
Participate in 5-S activities.
Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Ideal Candidate:
You have an A Certification
You have avionics / electric A/C Technical School or other substantiated equivalent
You have typically 0 – 2 years avionics work experience or substantiated equivalent experience
You have the ability to read and understand electrical engineering drawings
You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
You have your own basic set of hand tools with the ability to demonstrate inventory and control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You must be able to work unscheduled overtime including non scheduled work days and holidays
You must be able to work in seasonal/inclement weather outside
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35319
Job Location: Tucson, AZ
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Johnny Cruz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Elec Systems Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Unique Skills:
Avionics development and integration experience required. 25.981 analysis experience preferred.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-420
Job Location: Savannah, GA
Rate: $64 - $68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Perform preliminary and detail design of composite airframe structures, structure layout and design for manufacturability.
Experience designing composite primary aircraft structures utilizing Catia v5 is a MUST.
CPD/Composites Workbench experience is a huge plus.
Fibersim is acceptable if no CPD experience.
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $65-75/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Customer Training Specialist 4

Description:
PDS Tech is seeking a Customer Training Specialist  for an open position in Hazelwood, MO
In your role, you will: 

Email resume to: mmccarthy@pdstech.com or contact Mary Ann McCarthy @ 314-504-6039

  • Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

Basic Qualifications:



• Minimum of 7 years' experience with maintenance working on the egress systems

• Minimum of 2 years’ experience working on F-15 aircraft

• Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment



Preferred Qualifications:



• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions

Train AFE/Life Support maintenance technicians in support of F-15QA aircraft

• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions
 
Job Number: 2010115740
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvbBQAS&URLSource=cjhunter

Customer Training Specialist 4

Description:
Chipton-Ross is seeking a Customer Training Specialist 4 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

REQUIRED EXPERIENCE:
Minimum of 7 years' experience with maintenance working on engine/sec power systems
Minimum of 2 years experience working on F-15 aircraft

ADDITIONAL EXPERIENCE:
Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
Minimum of 3 years' experience with training courseware development with platform instructions

EDUCATION:
Accredited Technical Bachelor's degree and typically 9 or more years' related work experience or a Master's degree with typically 7 or more years' or a PhD degree with typically 4 or more years' related work experience or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.

FULL TIME/1ST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186297
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

Customer Training Specialist 4 - F-15QA Aircraft

Description:
**Must be able to obtain a Secret Clearance. US Citizenship Required**

Job Description:
Train egress maintenance technicians in support of F-15QA aircraft

Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.


**An individual with combined Egress and AFE/Life Support Skills would be ideal.**

Basic Qualifications:
• Minimum of 7 years' experience with maintenance working on the egress systems
• Minimum of 2 years’ experience working on F-15 aircraft
• Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment
• Minimum of 2 years’ experience working on F-15 aircraft

Preferred Qualifications:
• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
• Minimum of 3 years' experience with training courseware development with platform instructions
Train AFE/Life Support maintenance technicians in support of F-15QA aircraft
• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
• Minimum of 3 years' experience with training courseware development with platform instructions

**NOTE** An individual with combined Egress and AFE/Life Support Skills would be ideal

Job requires FAA ATP or Commercial certificate with the appropriate endorsements, and FAA Instructor certificate or military instructor certification, as applicable.
Technical bachelor's degree and typically 9 or more years' related work experience or a Master's degree with typically 7 or more years' or a PhD degree with typically 4 or more years' related work experience or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: 374526
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
***LONG TERM CONTRACT OR CONTRACT TO HIRE***
MUST be U.S. Citizen

Electrical engineers will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft. Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.


Must-haves:

• Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 3 or more years of relevant experience
• Knowledge of engineering principles and practices
• Experience with Computer Aided Engineering tools
• Familiarity with working in multi-disciplinary design and development teams
• The ability to obtain and maintain a Secret U.S. Security Clearance.

Preferred:

• Exposure to simulations through functional and logical models and system analysis
• Background in the Aerospace and Defense Industry
• Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
• Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)
• Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
• Understanding of Electro Magnetic Effects (EME) to include Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
• Experience in digital or analog circuit design and schematic capture
• Understanding of the printed circuit board layout process and tools
• Experience with FAA and/or Military aircraft certification programs



The Structures Company is an AA/EOE.
 
Job Number: 413
Job Location: CO
Rate: $32-$48/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 12+ MONTHS OR CTOH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Engineer

Description:
**REMOTE TO START**

Seeking an experienced Electromechanical Engineer to take ownership of research, design, develop, and/or test automated equipment. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.


Duties/Responsibilities:
 Designs and develops electromechanical systems used in the automation of industrial tasks.
 Plans, develops, and implements advanced precision equipment for assigned applications.
 Analyzes manufacturing and development processes, identifying opportunities for automation, modifications, and improvements.
 Identifies electromechanical add-ons and improvements available for existing devices and processes; recommends and facilitates upgrades.
 Conducts research and analysis to determine the feasibility, costs, and performance benefits of electromechanical equipment or enhancements.
 Researches options for sensors, communications technologies, and control devices, selecting and recommending the best option for each project; verifies the proper function of chosen devices.
 Identifies and selects materials appropriate for each electromechanical system design.
 Models, tests, builds, and/or implements electromechanical and automated design solutions.
 Applies electromechanical/automated solutions to the production, development, or transfer of components, finished goods, or other materials.
 Evaluates finished products; identifies and facilitates additional improvements and modifications.
 Drafts and maintains design documentation for parts, assemblies, and finished products.
 Maintains logs, records, files, and other documentation related to technical aspects of projects.
 Provides training and consultation on electromechanical and automated processes and equipment.
 Performs other related duties as assigned.


Required Skills/Abilities:
 Excellent analytical and problem-solving skills with a proven ability to apply mechanical and electrical engineering theories, practices, and procedures to automate products and processes.
 Excellent verbal and written communication skills.
 Excellent organizational skills and attention to detail.
 Proficient with computer-assisted design (CAD) software.
 Proficient with Microsoft Office Suite or related software.


Education and Experience:
 Bachelor’s degree in Engineering or related field required.
 At least three years of related work experience preferred.




The Structures Company is an AA/EOE.
 
Job Number: 421
Job Location: CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: CtoH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

In your role, you will:
  • Assemble fabricated aircraft parts at floor stations.
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
Qualifications:
  • Fine pitch soldering experience is required. (watch maker certifications)
  • 4 years experience in electronics assembly.
  • High School Diploma required.
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
 
 
Job Number: 1810083538
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

Engineering Technician

Description:
PDS Tech, Inc. is seeking a Engineering Technician, in Stratford, CT.
Job Responsibilities: 

Composite technicians support the fabrication, assembly, calibration, and test of rotorcraft scale models, and the fabrication, static testing and environmental conditioning of composite test articles.

Specific responsibilities will include:
  • Design equipment and facilities to support ground test operations.
  • Types of facilities to be engineered include component fatigue and static test machines, rotor and transmission test stands for performance and acceptance testing, power system test beds, airframe/landing gear drop test, airframe shake tests and aircraft tie-down facilities.
  • Responsibility spans from conceptual design to the operational product including resolution of all issues related to design, structural analysis, procurement, fabrication, installation and operation.
  • In addition, the candidate may also be assigned to the oversight of the detail design and planning process as well as the support of subsequent documentation at the manufacturing, assembly and installation level.


 
Job Number: 2010114347
Job Location: Stratford, CT
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Oq6xQAC&URLSource=cjhunter

Entry Level Engineering Lab Technician

Description:
PDS Tech is seeking an Entry Level Engineering Lab Technician in Stratford, CT
 
The Individual will be part of a fast paced team and work under direct or minimal supervision to perform a variety of materials analysis and testing per the laboratory's standard work and operating procedures. Will work closely with and under the direction of NDI, Test, Failure Analysis, Quality and R&D engineers to evaluate both metal and composite aircraft parts, new materials, shop processes, field and shop problems. Work with customers to define job scopes and due dates. Manage multiple priorities to plan and complete tasks with high quality and on time and budget. Tasks include macro and micro photo documentation, cutting and sectioning of parts and samples, metallurgical sample preparation of metals and composites, adhesion testing, data compilation and review. May be called upon to learn more advanced analysis techniques such as scanning electron microscopy and energy dispersive spectroscopy.



Perform all tasks safely, in a manner that complies to Laboratory Standard work and EH&S policies and regulations.


 
Requirments include:

- Strong computer skills.

- Strong communication skills needed to support team-based work environment.

- Strong organizational skills with the ability to manage in a fast paced environment with competing priorities



Experience with metallurgical techniques and sample preparation a plus, optical microscopy, digital photography, common and specialized hand tools, power tools such as reciprocating saws and dremel tool, personal computers, microsoft office applications ( word, excel, access, powerpoint), and the ability to follow written work instructions required. The ability to work in a fast paced, high pressure team environment a must.



Experience in other materials analysis techniques such as: preparing metallurgical mounts, standard hardness, micro hardness surveys, disassemble parts, corrosion testing. Off-shift work and overtime may be required to support business needs.



High School Diploma or equivalent, plus additional specialized courses or short term training (one year or less) with a minimum of 3+ years’ experience or up to an Associate’s Degree, Technical/business School Certificate or Diploma, Skilled Trades Apprenticeship, or other post high school training (two years duration) with minimum of 2 years plus experience. Associates degree preferred.
 
Job Number: 2010113949
Job Location: Stratford, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OoX8QAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer - Special Missions

Description:
Unique Skills:
Candidate to be experienced in Catia V4, Smarteam Databases. Catia V4 experience preferred. Prior Gulfstream SM experience is desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12551
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

F5 Engineering Ground Test / Structural Laboratory Technicians (1st Shift)

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test / Structural Laboratory Technicians in Stratford CT.

The Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnLJQA0&URLSource=cjhunter

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Fabrication Technician - Phoenix AZ area

Description:
Description
structural repairs, modification to general aviation aircraft structures.
Fabricate sheet metal components to support upgrades and modifications
Perform structural repairs, modifications, and upgrades on new/used Aircraft.
Perform fiberglass and bonded honeycomb structural repairs. Recommended.
Fabricate sheet metal components to support upgrades and modifications
Apply corrosion protective coatings and aircraft markings
Document aircraft and inspection records and maintain work logs
Make critical decisions and problem solve
Responsible for own work only.
 
Job Number: AZ5874
Job Location: Phoenix, AZ
Rate: Market
Overtime: Possible
Duration: Contract
Start Date: 2/3 wks from offer
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Field Service Representative 3 - Defense

Description:
**Secret Clearance required to start**

**Position is 2nd shift**

• Seeking a Field Service Representative to provide technical support and on-site company representation at Joint Base Andrews, Maryland for the C-32/C-40 aircraft
• Utilize multi-disciplined technical expertise and company knowledge to assist the customer.
• Sustain a high level of proficiency in the operation and maintenance of company product by investigating technical problems, determining causes, and developing/implementing corrective actions to ensure customer satisfaction.
• Understand customer expectations and assist the customer in interpreting and using support data and documents, and provide technical on-the-job training.
• Act as the on-site liaison between the company and customer personnel of widely varying backgrounds to gain resolution of significant technical and operational issues.
• Provides guidance, consultation, and training to customers related to a broad range of technical and operational issues. Conducts on site in-depth research of company and customer data to drive resolution of specific chronic issues.
• Conducts root-cause analysis on customer and company fleet data to identify/evaluate trends and opportunities to increase dispatch reliability. Validates or reviews effectiveness of existing solutions, and then develops corrective, proactive, and/or preventative action plans.
• Work unsupervised for extended periods of time in a wide variety of cultural/economic conditions.
• Interpret technical documents and monitors product performances. Develop and conduct ad hoc training on various maintenance topics.
• Analyze technical data and evaluate maintenance procedures.
• Requires the ability to work independently in a demanding, on-call, 24 hour per day / 365 days per year operational environment.
• Develops action plans for aircraft in unusually difficult AOG situations, whereby Service Engineering and/or executive leaders solicit FSR assistance. Tracks progress of troubleshooting plan and maintains company and customer situational awareness. Conducts follow-up with the customer to ensure solution provided was effective and lasting.
• Must be willing to work any shift, weekends or on call as required.
• Must have an active FAA A&P License
• Must be willing to work any shift, weekends or on call as required.
• Must have an active FAA A&P License

Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).
 
Job Number: 374542
Job Location: Andrews AFB, MD
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Flight Simulator Design Engineer 4

Description:
Chipton-Ross is seeking 3 Flight Simulator Design Engineer 4's for openings in Berkeley, MO.

RESPONSIBILITIES:
Seeking F-15 Training Systems Test Pilot SMEs to accomplish system design, integration, and test for the F-15 Mission Training Center (F-15 MTC). Responsibilities include:
- The successful candidate will work independently and will assist other members of the Test Team in the performance of day-to-day operations in a fast-paced testing environment.
- Team members create and execute Test Procedures to ensure the trainers correctly simulates aircraft performance and the operational environment.
- Team members will help develop system requirements, and perform all aspects of system testing on several types of pilot training systems.
- Off shift and weekend work may also be occasionally required to meet contractual milestones, objectives and delivery schedules
- This is a mid-level to senior grade position

Plans research and development programs for flight simulator requirements. Translates contract requirements into work requirements, processes and tasks. Manages customer and supplier relationships. Researches and responds to specialized technical questions from customers on flight simulator operations, service and regulatory concerns. Provides on-site customer assistance to support the introduction of new training equipment. Resolves specialized customer issues in the field. Leads and reviews analysis and evaluation of specialized engineering and supplier aircraft systems and performance data, operational documents and software for delivery to customer. Researches and analyzes customer and regulatory authority requirements to ensure they comply with industry standards. Leads and reviews client processes across organizations for defining the customer product, delivery and support. Develops new/revised processes in support of customer requirements and/or changes in company guidelines. Works under minimal direction.

ADDITIONAL EXPERIENCE:
-Experience flying F-15 and/or other fighter aircraft within the last five years
- Experience in an aircraft test environment
- Experience flying F-15 and/or other fighter aircraft

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

TRAVEL: YES
Ability to travel domestically and internationally.25% international travel to Okinawa Japan and UK. Travel duration will be less that 29 days.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM
Ability to work flexible hours, overtime and occasional weekends when necessary.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184160
Job Location: Berkeley, MO
Rate: $DOE
Duration: 6 Months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Data Operations / Instrumentation Engineer, Fort Worth, TX

Description:
Flight Test Data Operations / Instrumentation Engineer, Fort Worth, TX

JR-018554

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.


This position is responsible to provide engineering support to flight test & evaluation aircraft development programs, including: flight test data center computer systems, mission control telemetry rooms, deployment of offsite mission control rooms for offsite flight test data processing, data processing troubleshooting, and data center computer equipment upgrades and system integration. The position will also support Flight test Instrumentation for development and testing of experimental aircraft. You will be working in a team environment as you lead the instrumentation effort and support initial test operations within established flight test guidelines to achieve safe flight operations.

You Will:
• Provide Flight Test Data Center computer and sub-system hardware support 24/7
• Integrate new technologies for Flight Test Data Systems
• Work closely with software development team to validate and troubleshoot changes to data acquisition software.
• Troubleshoot a variety of real-time and post-flight data acquisition issues
• Data Center Computer System Configuration Control and System Administration
• Provide support for Offsite Flight Test Data acquisition activity to include offsite deployment planning, and setup/configuration of offsite computer systems, network link to offsite location, voice communications, offsite GPS station, offsite weather station, etc.
• Coordinate with IT on network architecture issues and offsite network solutions
• Develop, update, and maintain engineering documentation, to build a working repository of common support tasks.
• Develop group work instructions and train Data Operations personnel

Flight test instrumentation Responsibilities include:
• Design, implement, and maintain instrumentation Airborne Data Acquisition Systems (ADAS) used to condition, monitor, and record data for test objectives.
• Provide direction to Flight Test Instrumentation Technicians, Electricians, Mechanics
• Collaborate with internal disciplines, including Flight Test Hardware Integration Engineers, Flight Test Engineers, Flight Technology, Instrumentation Labs, Standards and Calibration, Aircraft Coordinators, etc.,
• Generate and update electrical drawings through CAD software

You Will Need:
• Relevant working experience with PCM data acquisition systems
• Relevant working knowledge of network protocols and network architecture
• Working experience with OpenVMS system administration
• Knowledge in the following instrumentation sensor applications: strain gages, accelerometers, pressure transducers, thermocouples, RTDs, pitot-static systems, etc.,
• Familiarity with following bus formats: 1553-B, ARINC-429, RS-232/422/485
• Familiarity with airborne data acquisition systems (Teletronics, Zodiac, Quasonix equipment a plus)
• Ability to read and understand electrical drawings
• Familiarity with AutoCAD, Draftsight, or equivalent software for creating, modifying or updating electrical drawings.
• Proficiency with Microsoft Office Software Suite (Word, Excel, PowerPoint, Outlook, Access, Project)

Education: BS Electrical / Electronics / Computer sciences / Instrumentation engineering or MS BS Electrical / Electronics / Computer sciences / Instrumentation engineering

Experience: Minimum 3 to 5 years’ experience in Aerospace field required. (Experience in Flight Test Instrumentation is a plus)

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018554
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineers

Description:
Required:
1.Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
2.Advanced knowledge and experience with MSC Nastran and Patran (10 years)
3.Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
4.Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

Email resume to: mmccarthy@pdstech.com or call: 314-504-6039
 
Job Number: Loads-Gulf
Job Location: Savannah, GA
Rate: $70.00-$77.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Flutter and Dynamic Loads Engineer

Description:
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
Advanced knowledge and experience with MSC Nastran and Patran (10 years)
Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

As an Engineering Contractor in Flutter & Dynamic Loads, you will:
Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios
Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions.
Document completed analysis and findings in Engineering Reports for aircraft Certification.
Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups.

What you'll bring to the team:
Extensive knowledge of aircraft aeroelasticity principles and concepts
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling
Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis
Experience with preparation for and execution of aircraft ground vibration tests
Experience with preparation for and execution of aircraft flight flutter testing
Experience with aeroservoelasticity is a plus
Advanced knowledge and experience with MSC Nastran and Patran
Knowledge and experience with Matlab and/or Python for analytical and post test data processing
Knowledge and experience with one or more commercial or NASA CFD analysis toolsets
Knowledge and experience with Unix and/or Linux
Strong verbal and written communication skills, with prior experience in a project leadership role.
An ability to clearly and concisely convey technical concepts to all technical and/or management levels
Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations
Advanced degree in Aerospace Engineering strongly preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-436
Job Location: Savannah, GA
Rate: $70 - $77/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/24/2020
Last Updated: 11/24/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter and Loads Engineer

Description:
Required: 1. Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years) 2. Advanced knowledge and experience with MSC Nastran and Patran (10 years) 3. Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years) 4. Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years) As an Engineering Contractor in Flutter & Dynamic Loads, you will: • Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios. • Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions. • Document completed analysis and findings in Engineering Reports for aircraft Certification. • Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups. What you'll bring to the team: • Extensive knowledge of aircraft aeroelasticity principles and concepts • Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification • Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling • Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis • Experience with preparation for and execution of aircraft ground vibration tests • Experience with preparation for and execution of aircraft flight flutter testing • Experience with aeroservoelasticity is a plus • Advanced knowledge and experience with MSC Nastran and Patran • Knowledge and experience with Matlab and/or Python for analytical and post test data processing • Knowledge and experience with one or more commercial or NASA CFD analysis toolsets • Knowledge and experience with Unix and/or Linux • Strong verbal and written communication skills, with prior experience in a project leadership role. • An ability to clearly and concisely convey technical concepts to all technical and/or management levels • Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations • Advanced degree in Aerospace Engineering strongly preferred
 
Job Number: 20-155150
Job Location: GA
Per Diem: $77
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Worker

Description:
Ground Support Equipment Worker

Job ID # 2020-11742

Contract Opportunity

Location: Fort Bragg, NC

Industry: Aerospace & Defense

Clearance Requirement: Secret Clearance

 

What You’ll Do:

Make repairs to Ground Support Equipment (GSE) following orders of a higher-grade worker.
Troubleshoot malfunctions of GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools
Prepare GSE for storage and transportation
Use automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems.
Perform scheduled and unscheduled maintenance on GSE, inspects, tests, and operates GSE to determine equipment serviceability and proper operation, services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components.
Remove, disassemble, repair, clean, treat for corrosion, assemble, and reinstall GSE components and accessories, stencils and marks GSE in accordance with technical publications.
Store, handle, label, use, and dispose of hazardous materials and waste in accordance with all state, local, and federal environmental standards
Regulate, operate, clean, inspect, and service GSE towing vehicles
Maintain vehicle records.
Maintain and updates paper and electronic equipment records
Provide dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations, and practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times.
What You’ll Need:

Secret Clearance; Top Secret Clearance wanted.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11742
Job Location: Fort Bragg, NC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 7 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Ground Test Engineer

Description:
PDS Tech, Inc. is seeking a Ground Test Engineer, in Stratford, CT
Description:
  • Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
  • Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
  • Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
  • Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
  • This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
  • Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
  • Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts. 
  • Support and manage the development, coordination and conducting of technical tests and evaluation of engineering design concepts and understands and can develop and analyze test plans.
  • Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
  • Compilation and analysis of performance reports

 
Experience/Qualifications 
  • BA/BS candidates require 4-7+ years’ experience, 
  • MA/MS candidates require 2-5+ years’ experience, 
  • PhD candidates require 0-2+ years’ experience. 

 
Job Number: 2010113302
Job Location: Stratford, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr1SQAQ&URLSource=cjhunter

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Knowledge / Records Management

Description:
Description:

Purpose of Job: International Military Sustainment Support Team is looking for an Analyst to support the Aftermarket Spares process. The employee will be responsible for working with Operations to prioritize approximately 2,000 parts required in support of multiple sustainment contracts. Part number mods, unqualified parts, and allocation with production/aircraft demands will increase difficulty to support DTC / revenue plans. This position offers a great opportunity to get insight into the business by working with various departments and provides exposure to a wide variety of topics. Role and responsibilities can expand over time.

Assigned Duties include but are not limited to:
• Burndown of approximately 2,000 part numbers
• Alignment of schedules on parts requiring manual planning work and alignment
• Work with supply chain to prioritize PR’s
• Work with Delivery Assurance to prioritize deliveries
• Participate in daily/weekly supplier meetings with Delivery Assurance and Supply Chain
• Work with appropriate Ops and Programs leads and analysts to prioritize and track “make” parts
• Identify gaps/capacity restrictions resulting in allocation decisions
• Report out weekly and work with Programs on risk identification, risk reduction plans, performance to burndown of need

This project will require thousands of SAP transactions to occur, as well as significant follow up across the operations team and alignment and communication with programs.

Skills and Experience

- High level of data analysis and reporting experience
- Working knowledge of MS Excel
- MS PowerPoint
-Excellent communication skills
-Detail oriented
-Analytical thinking
-Problem solver

- Previous experience with SAP a plus but not requirement.

Education: Bachelor Degree
 
Job Number: 132571
Job Location: Stratford, CT
Rate: 21.57
Per Diem: Possible
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Loads & Dynamics Engineer 3 & 4

Description:
Job Description:
  • Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

Required:
  • Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
  • Experience in Modelling & Simulation and Tools & Process development.
  • Demonstrated problem-solving skills.
  • Possess interpersonal communication (written & verbal) skills in a team oriented environment.
  • Ability to interact professionally with customer, supplier, field & production representatives.
  • Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
  • Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.  


 
 
Job Number: 2010110794
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Many New Long Term Aerospace Programs in Missouri

Description:
Stress Engineers: either metallics or composites (secret and non-secret)

Structural Designers: must be degreed and have UG NX experience

Electrical Design Engineers: must be degreed and have UG NX experience

Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

Tool Designers: UG NX background, aerospace or aircraft background

Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

Software Engineers: Ada, C++; avionics experience a plus

System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Coordinator

Description:
Material Coordinator

Job ID # 2020-11727

Contract Opportunity

Location: San Antonio, TX

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

 What You’ll Do:

Handle aircraft parts, tools and related hardware in receiving areas and ensure that the shop, tool rooms and other customers are supplied with tools, equipment and supplies.
Receive, sort, store, kit, inventory, issue, release, route, locate, coordinate, prepare and move materials (such as: raw materials, tools/tooling, parts, drawings, equipment/support equipment supplies, surplus property, and hazardous materials and waste) for one or more assigned.
Support schedule revisions by coordinating the movement of all materials as required.
Perform unloading of all vehicles, or other material movement devices as required.
Check materials with identification on orders and facilitate the correction of discrepancies according to processes and procedures.
Accumulate and maintain accountability records and/or reports, relay availability and status for all materials processed.
Operate riding type electric powered elevating equipment move material.
Perform all tasks involved in ordering, receiving, recording, storing, checking, issuing, shipping and releasing of tools, shop supplies, materials, machine accessories, special tools, tooling and support equipment.
Perform tasks that require knowledge and understanding of the terminology related the tools and equipment in stock.
Establish and adjust minimum and maximum requirements for tools and supplies.
Set up inventory recording and control systems.
Identify improvements for processes and procedures as needed.
Operate typical shop equipment to provide movement of all materials.
Operate any and all types of information systems required to perform assigned task.
Familiarize other employees with functions, methods, procedures, etc., by passing on information and answering questions.
Use power or hand operated cutting tools and equipment for cutting material requisition size.
Check hardware and tools for visible damage and route broken, worn, or obsolete hardware and tools proper authority for disposition.
Accumulate and relay availability and status for all materials processed.
Open containers; identify, weigh and count contents and verify quality acceptance of incoming hardware.
Upon receival, check items for identification and damage. Re-load trucks as required.
Prepare items for shipment, along with appropriate coordination and documentation, for flyaway, remote kits, grief resolution and vendor pickup. Inspect content of and clear tool boxes, issue hold out notices as required.
Clean oxygen hand tools, store and issue fasteners, etc., in accordance with established procedures.
Kit, re-label, repackage, machine and/or hand mix sealant, paints, adhesives, lubricants, solvents as required under the direction of a higher grade employee.
Dress tool grinder wheels, cut off drills and reamers, etc.


What You’ll Need:

The physical demands and potential hazards described here are typical of those that may be encountered in this job:
Eye, hearing, hand and foot protection, fall protection, as required.
Require frequent lifting up t35 lbs.
Frequent standing, reaching, handling, turning/twisting, lifting/lowering.
May require bending, kneeling, crouching, squatting.
Exposure to aluminum, steel, plastics, fiberglass, graphite composites.
Exposure radioactive signs, explosives, and other hazardous materials.
Exposure lubricants, solvents, wood splinters and saw dust.
Use of potentially dangerous tools such as pneumatic nail guns and staplers, power saws, knives and band cutters.
May require working from high places.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11727
Job Location: San Antonio, TX
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Coordinator

Description:
Material Coordinator

Job ID # 2020-11726

Contract Opportunity

Location: San Antonio, TX

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Handle aircraft parts, tools and related hardware in receiving areas and ensure that the shop, tool rooms and other customers are supplied with tools, equipment and supplies.
Receive, sort, store, kit, inventory, issue, release, route, locate, coordinate, prepare and move materials (such as: raw materials, tools/tooling, parts, drawings, equipment/support equipment supplies, surplus property, and hazardous materials and waste) for one or more assigned.
Support schedule revisions by coordinating the movement of all materials as required.
Perform unloading of all vehicles, or other material movement devices as required.
Check materials with identification on orders and facilitate the correction of discrepancies according to processes and procedures.
Accumulate and maintain accountability records and/or reports, relay availability and status for all materials processed.
Operate riding type electric powered elevating equipment move material.
Perform all tasks involved in ordering, receiving, recording, storing, checking, issuing, shipping and releasing of tools, shop supplies, materials, machine accessories, special tools, tooling and support equipment.
Perform tasks that require knowledge and understanding of the terminology related the tools and equipment in stock.
Establish and adjust minimum and maximum requirements for tools and supplies.
Set up inventory recording and control systems.
Identify improvements for processes and procedures as needed.
Operate typical shop equipment to provide movement of all materials.
Operate any and all types of information systems required to perform assigned task.
Familiarize other employees with functions, methods, procedures, etc., by passing on information and answering questions.
Use power or hand operated cutting tools and equipment for cutting material requisition size.
Check hardware and tools for visible damage and route broken, worn, or obsolete hardware and tools proper authority for disposition.
Accumulate and relay availability and status for all materials processed.
Open containers; identify, weigh and count contents and verify quality acceptance of incoming hardware.
Upon receival, check items for identification and damage. Re-load trucks as required.
Prepare items for shipment, along with appropriate coordination and documentation, for flyaway, remote kits, grief resolution and vendor pickup. Inspect content of and clear tool boxes, issue hold out notices as required.
Clean oxygen hand tools, store and issue fasteners, etc., in accordance with established procedures.
Kit, re-label, repackage, machine and/or hand mix sealant, paints, adhesives, lubricants, solvents as required under the direction of a higher grade employee.
Dress tool grinder wheels, cut off drills and reamers, etc.
What You’ll Need:

The physical demands and potential hazards described here are typical of those that may be encountered in this job:
Eye, hearing, hand and foot protection, fall protection, as required.
Require frequent lifting up t35 lbs.
Frequent standing, reaching, handling, turning/twisting, lifting/lowering.
May require bending, kneeling, crouching, squatting.
Exposure to aluminum, steel, plastics, fiberglass, graphite composites.
Exposure radioactive signs, explosives, and other hazardous materials.
Exposure lubricants, solvents, wood splinters and saw dust.
Use of potentially dangerous tools such as pneumatic nail guns and staplers, power saws, knives and band cutters.
May require working from high places.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

 High School Diploma/GED 


What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11726
Job Location: San Antonio, TX
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanic General

Description:
Chipton-Ross is seeking 8 Mechanic General's for an opportunity in Jacksonville, FL.

RESPONSIBILITIES:
This position is for a General Mechanic Level 2

F/A-18 experience preferred

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS: 6:00AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 186490
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
A Mechanical Systems Design Engineer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for supporting the design, development, and test of launch vehicle mechanical systems. To be considered for this role, you will have a Bachelor's degree in an Engineering discipline, and five years of experience designing Aerospace or equivalent type mechanical system elements within aircraft, spacecraft, or launch vehicles.

Mechanical Systems Design Engineer Job duties:

* Participate in the entire design cycle of mechanical subsystems, including conceptual and detailed design, trade studies, structural analysis, development testing and qualification
* Generate 3-D models, component drawings, assembly drawings, and interface control documents with application of GD&T per ASME Y14.5
* Create documentation for assembly and testing of development and flight hardware
* Participate in subsystem level testing including planning, execution, data reduction and analysis
* Develop component specifications, manage suppliers, provide manufacturing and production support

Qualifications:

* Strong mechanical design and integration skills using 3D modeling tools (CREO preferred)
* Experience in Creo (Pro-E) piping and routed system tools
* Experience in Creo (Pro-E) kinematic mechanism design or other mechanism analysis tools
* Experience in structural FEA using ANSYS, NASTRAN or similar tools
* Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

If you are interested in this Mechanical Systems Design Engineer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 305374
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Mechanical Systems Design Engineer

Description:
Aircraft Engineering & Design--

10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
-System Engineering
-Architecture
-Design
-Integration
-Test or requirements activities
Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 53934
Job Location: California
Input Date: 11/23/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Planner

Description:
Project Planner

Job ID # 2020-11723

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

Minimum Experience: 5 Years

 

What You’ll Do:

Plan sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers.
Plan detail operations from blueprints, engineering orders, change notices, and other engineering releases.
Determine the need for tooling and makes recommendations for the design and planning of required tools.
Prepare shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements.
Maintain progress reports, schedules, and other related records.
Convert/use contractual documents, engineering drawings, technical manuals, Time compliance Technical Order, or other technical data to provide direction in work documents to accomplish aircraft production/maintenance/modification.
Use standardized processes to resolve errors with engineering and other technical data.
Conduct concurrent review boards with Production, Quality, and Engineering to ensure work documents are technically accurate and clearly written for technician/mechanic execution.
Conduct hangar floor checks for work document improvement opportunities.
Initiate/ process Planning Change Requests.
Provide direction to liaison planners for incorporation of work document updates.
Coordinate across functional organizations to clear document rejects.
Participate in Integrated Product Team meetings to provide status of work packages.
What You’ll Need:

Basic Qualifications:
Minimum of 5 years aircraft maintenance and/or modification technical writing experience
Experience writing technical instructions for paint/coating
Experience reading and interpreting engineering documents and drawings
Ability to plan sequence of work
Proficient using MS Word and Excel
Experience using military technical manuals
Desired Skills:
Previous experience writing work instructions
F-16( fighter jet) writing experience preferred
Areas of Expertise:
Technical Writing
Technical Skills:
Ability to Read Engineering Drawings
Ability to Write technical documents and end-user documentation
Technical Writing
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

5 + Years of experience and/or modification technical writing experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11723
Job Location: Greenville, SC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Scheduler

Description:
Seeking a first rate, highly qualified Project scheduler and planner to support a variety of programs and projects including vehicle test, modification, sustaining activities and new product development. The Project scheduler and planner will work closely with the project team(s) and Program Management Office to develop, maintain, and execute their project plans. This is an excellent, exciting opportunity for a motivated, experienced individual with proven hands-on experience in producing and maintaining engineering and or manufacturing plans for aircraft design, development and support.

Your Mission
• Organize, create, and maintain project schedules to support Programs, and other identified projects in accordance with Project Management Office (PMO) best practices and guidelines.
• Assist project team(s) in tasks and sub tasks set up to ensure satisfactory realization of project requirements as scheduled to support Program, and overall objectives/goals.
• Support PMO performance metrics by adhering to Program WBS guidance, as documented in WBS Guidelines and Earned Value Management.
• Support PMO and project team(s) by monitoring scopes of work using Program aligned WBS for control and integrity.
• Interact with PMO and project team(s) to schedule work and coordinate resource assignments.
• Support PMO and Supply Chain by interacting with project team(s), Team Leads (scope owners), and CE to define scope of work to develop and update detailed schedules, cost information and identification of variances from original plan.
• Support PMO by evaluating schedule(s) progress and performance, and identify developing problem areas.
• Support Program and project team(s) by monitoring schedule progress, including identifying critical activities and reviewing forecasts and progress achieved to date. Analyze critical path and constraints to determine effect of changes to schedule and recommend work-around.
• Develop and update weekly short interval work plans for project team(s).
• Track baselines, perform what-if analysis, and develop mitigation plans to support Program.
• Support PMO by documenting all changes to cost and schedule, reporting variances to PBM.
• Support PMO by assisting project team(s) in maintaining monthly (or as requested by PMO) status reports to keep management informed on project progress.
• Support PMO in conducting analysis to determine alternative courses of action or recovery on slipped schedules and or deadlines.
• Support PMO and project team(s) by ensuring accuracy of schedules
• Effectively interact with PMO, CE, project team(s), Team Leads, Supply Chain, and Finance when required.
• Additional tasks as required.


What You Bring
• Advanced knowledge regarding the effective integration of schedule and cost in an EVMS environment
• Experience with products built during the planning processes [e.g., IMP, IMS, Product Breakdown Structure (PBS), Work Breakdown Structures (WBS)]
• Proficiency in Microsoft Office applications (Word, Excel, PowerPoint)
• Advanced MS Project skills (Resource loading/tracking, basic requirements for earned value, progress tracking, variance analysis, critical path review and analysis)
• Ability to work without supervision to lead the development of program plans and schedules for multiple programs concurrently
• Strong facilitation skills and the ability to proactively communicate with all levels of management
• Ability to motivate and influence others, build effective interpersonal relationships, and be able to foster and contribute to a positive and productive team environment
• Demonstrate flexibility and adaptability in work style to better respond to multiple requests and handle sudden changes in priorities
• Ability to embrace and participate in change initiatives
• Excellent follow through and persistence
• Due to export control regulations this role is open to U.S. citizens only
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Education Requirements
Bachelor's degree and 5+ years applicable experience relative to Program Planning and Scheduling using MS Project. Experience in manufacturing and or aerospace scheduling/planning desired, but not required


The Structures Company is an AA/EOE.
 
Job Number: 425
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Inspector

Description:
A Quality Assurance Inspector job in Colorado Springs, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for inspecting aircraft systems, production components, and support fulfilling all contractual and quality requirements, and support the design and creation of the most groundbreaking aerospace and defense technologies. To be considered for this role, you will need a High School Diploma or GED equivalent and at least 5 years of relevant experience. This is a great contract opportunity with a growing company. An active Secret U.S. Security Clearance required.

Quality Assurance Inspector Job duties:

* Verify aircraft installed systems, logistics operations, production components, and support functions fulfilling all contractual and quality requirements.
* Visually inspecting operational components for serviceability and proper installation, validating Field Service Technician's work, developing and reviewing operational procedures, and function as the on-site Aviation Safety Official.
* Ability to understand and interpret technical schematics and documents
* Basic understanding of electrical wiring concepts
* Working knowledge of Microsoft Office and Adobe Products
* FAA Airframe and Power Plant License
* An active Secret U.S. Security Clearance required

Qualifications:

* High school diploma or GED equivalent and at least 5 years of relevant experience
* Knowledge and ability to interpret geometric dimensioning and tolerance
* Experience drafting work instructions and SOP's
* Experience with Network+, Security+, CCNA and/or A+
* Experience with FCC or FCC GROL
* Basic understanding of Spectrometer, Oscilloscope and/or other measuring equipment
* Working knowledge of ISO 9000 and AS 9100 standards

If you are interested in this Quality Assurance Inspector job in Colorado Springs, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 305457
Job Location: Colorado Springs, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Reliability & Maintainability Engineer 3 & 4

Description:
Job Description:
  • Analyzes requirements and develops an R&M engineering program to achieve customer objectives.
  • Analyzes projected utilization and calculates effect on final system reliability based on individual part reliabilities.
  • Allocates top level R&M quantitative requirements to design teams. Performs reliability predictions and track performance.
  • Develop FMECAs; Support Airworthiness and safety engineering as required
  • Perform Maintainability Analysis; leverage human factors and quality engineering best practices
  • Perform Reliability Centered Maintenance (RCM) analysis; leverage MSG-3 best practices
  • Perform Reliability Development Testing (HALT/CAST)
  • Perform R&M analyses and assessments on selected systems and influence Fault Detection and Isolation BIT requirements
  • Run scripts to translate these models into a form that is executable logic on the aircraft, and simulate intended operation.
  • Work with the real-time software development team to integrate the resulting executable applications into the Mission Computing hardware.
  • Develop Testability models from schematics, FMECAs, ICDS and other available supplier documentation to assess compliance to customer fault detection/isolation requirements.  Perform Failure Modes and Effects Testing (FMET)
  • Develop FRACAS plan and deploy closed loop FRACAS; lead FRB; Maintain RGC’s and perform Weibull Analysis

Required:
  • Minimum of 5 years experience performing R&M Engineering
  • Bachelor's, Master's, or PhD with 7 or more years' experience. Degree from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. ABET is the preferred, although not required, accreditation standard.
  • Radar / Propulsion / Avionics / Hydromechanical and other relevant Aero system knowledge required.
  • Microsoft Excel, MATLAB/Simulink, Boeing RAMC, and Vanderbilt FACT run time reasoning tools.
  • MIL-HDBK-217F Reliability Prediction Electronic Equipment.
  • Rome Air Development Center AD-A153 744 Reliability Derating Procedure.
  • MIL-STD-1629 Rev A Procedure for Performing a Failure Mode, Effects and Criticality Analysis.
  • The ability to obtain a US Interim Security Clearance clearance pre start, final post start which requires US Citizen.

 
Job Number: 2010110791
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBOQAY&URLSource=cjhunter

S/M Techs

Description:
PDS is seeking Structural Mechanics for open positions in Bridgeport, West Virginia.
 
In your role, you will:
  • Adhere to Company General Work Requirements (Factory, Shop and / or Hanger positions)
  • Safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.
  • Comply with environmental health / safety policies / procedures.  Participate in 5-S activities.  Perform work in a safe and timely manner.
  • Troubleshoot, repair, inspect and perform maintenance on customer aircraft
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft parts
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Assist with aircraft component repair


Education and Experience:
  • You have typically 2 + years structural sheet metal repair / modification experience or substantiated similar experience
  • You have sheet metal A/C Tech school or equivalent schooling
  • You have the ability to interpret and work with mechanical engineering drawings
  • You hold an A or A&P license (REQUIRED)
  • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  •  You have your own basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • You must obtain appropriate Ground Support Equipment Qualifications as required
  • You have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • You have the ability to work in seasonal/inclement weather outside
  • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • You have basic PC skills
  • You have experience on corporate jet aircraft / commercial aircraft 

 
Job Number: 2010115624
Job Location: Bridgeport, WV
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvH3QAK&URLSource=cjhunter

Sheet Metal Technician

Description:
PDS Tech, Inc. is seeking a Sheet Metal Technician, in Mesa, AZ.

I. Fabricate sheet metal components to support upgrades and modifications

II. Perform structural repairs, modifications, and upgrades on new/used Bell model helicopters

III. Perform fiberglass and bonded honeycomb structural repairs. Recommended.

IV. Fabricate sheet metal components to support upgrades and modifications

V. Apply corrosion protective coatings and aircraft markings

VI. Document aircraft and inspection records and maintain work logs

VII. Make critical decisions and problem solve

VIII. Responsible for own work only.
• High school diploma or equivalent required

• Ability to read and understand Catia based blueprints and schematics.

• Proven ability to navigate, interpret, and apply tech data

• Ability to make critical decisions and problem solve



• Minimum 2 years accomplishing structural repairs, modification to general aviation aircraft structures.
 
Job Number: 2010117557
Job Location: Mesa, AZ
Duration: 9 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P2dRQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of aircraft products and services

Unique Skills
• Proficient with the utilization of Simulink in a real time simulation environment
• Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
• Aircraft system simulation experience
• Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
• Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
• Rectifying lab problem reports issues through troubleshooting, solution development and implementation
• Responsible for satisfying lab customer questions and/or test assistance
• Ability to read aircraft/simulation electrical drawings
• Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
• Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
• Troubleshooting lab simulation hardware/software and connected auxiliary test equipment

Education and Experience Requirements
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-439
Job Location: Savannah, GA
Rate: $65-$75/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation and Software Engineer

Description:
- Proficient with the utilization of Simulink in a real time simulation environment
- Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
- Aircraft system simulation experience
- Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
- Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
- Rectifying lab problem reports issues through troubleshooting, solution development and implementation
- Responsible for satisfying lab customer questions and/or test assistance
- Ability to read aircraft/simulation electrical drawings
- Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
- Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
- Troubleshooting lab simulation hardware/software and connected auxiliary test equipment
 
Job Number: 20-155470
Job Location: GA
Rate: $75.00 per hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Sr Systems Engineer

Description:
Aircraft Engineering & Design--

Candidates should be able to demonstrate the ability to write requirements, DOORS exp; will need to have certification and testing experience; DO-160 experience preferred; solid understanding of systems engineering in a large aerospace environment

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 54094
Job Location: California
Input Date: 11/23/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

Sr. Systems Verification Engineer

Description:
A Sr. Systems Verification Engineer job in San Antonio, TX is currently available through Belcan with one of our key aerospace clients in support of prestigious aircraft systems retro-fit/overhaul. In this role, you will be responsible for collaborating with all Systems Engineers and other IPTs (Integrated Product Teams) in accomplishing project task. You will also be responsible for coordination of technical efforts in accordance with the SE project SOW, CDRLs, the project IMP, engineering standard work, and the project IMS. To be considered for this role, you will have a Bachelor's degree Engineering plus a minimum of 10 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Systems Verification Engineer Job duties:

* Requirements Management, Risk Management, System Integration and Issue Resolution, Verification Planning, compliance gap closure, and requirements traceability.
* Support the Chief System Engineer (CSE) and the SE Technical Lead in execution of compliance updates to the subsystem specifications to provide traceability to the Air Vehicle Specification.
* Work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Responsibilities include creating and presenting technical data and metrics, and representing the project in meetings with leadership.

Qualifications:

* This job requires an understanding of the operation and interrelationships of aircraft systems; an appreciation for the impact that configuration or requirements changes may have on performance related attributes, cost and schedule.
* The individual should have experience and a strong understanding of Earned Value Management (EVM).
* The individual will need to be able to work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Experience and proficiency with requirements management tools such as DOORS is preferred.

If you are interested in this Sr. Systems Verification Engineer job in San Antonio, TX, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 303642
Job Location: San Antonio, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=303642&job_number=303642

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Qualifications:
• Must have experience with aircraft primary structures
• Deep understanding of Theoretical Statics and Strength of Materials.
• Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Minimum 5 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
• Experience with free-body diagrams and classical stress analysis techniques
• Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP.
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus
• Applicants mut be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Educational Requirements
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline


The Structures Company is an AA/EOE.
 
Job Number: 71
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Stress Engineer

Description:
PDS Tech is seeking a Stress Engineer in St. Louis, MO

Actively collecting and screening resumes for upcoming needs. 

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

  • The Stress (Analysis) Engineer will develop, analyze, design and establish test procedures for aero-structure products and airframe structure for a variety of internal and external customers
  • Design and analyze details of mechanically fastened and bonded joints for both composite and metallic airframe structures.
  • Support the design and development of 3D CATIA datasets and/or 2D drawings
  • Integrate technical, cost, value, and safety considerations into the product definition to comply with customer, regulatory and company requirements and document results in drawings, datasets, reports specifications and supporting data
  • Interface with other members of project or program team, management and manufacturing staff to develop producible products that reduce process times, rework, and scrap
  • Interface with customers and suppliers to achieve cost effective, technically sound and functionally superior product.

Basic Qualifications:



  • Bachelor’s degree in Engineering from an ABET accredited program.
  • 8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
  • Strong computer skills with knowledge of Microsoft Office products.   Experience with CATIA V4/V5 a plus.
  • Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.   
  • Experience with hand calculations and template use/applications
  • Willingness to travel in support of the development effort


Preferred Qualifications:



  • Composites and Metallic experience 
  • PATRAN and/or NASTRAN
  • Previous Large Aircraft or Fighter Jet experience is a plus. 

Required: 

  • An active Secret Clearance is required.  
  • Must be a US citizen able to hold secret level security clearance. 
  • Bachelor’s degree in Engineering from an ABET accredited program.

 
Job Number: 2010114672
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrplQAC&URLSource=cjhunter

Structural Analyst

Description:
A Structural Analyst job in Kent, WA is currently available through Belcan with one of our Aerospace clients. You will be responsible for structural loads, dynamics and analysis of vehicles which will land people and payloads on the Moon. You will also perform finite element analysis at the vehicle and component levels, design optimization, structural testing, and verification. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Aerospace or Civil Engineering. This is a great contract opportunity with a great company.

Structural Analyst Job duties:

* Analysis of primary and secondary spacecraft structures
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies

Qualifications:

* Minimum of a B.S. degree in Mechanical, Aerospace or Civil engineering
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* 7+ years of experience with aircraft, spacecraft, launch vehicle, or automotive in some of the following areas: External loads; Vibro-acoustic analysis; Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Optistruct
* Vehicle load path definition and strength analysis desired
* Analysis of metallic and/or composite structures (skin-stringer, fittings, sandwich panels, etc.)
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Structural Analyst job in Kent, WA, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 305517
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=305517&job_number=305517

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Currently reviewing and collecting resumes for anticipated upcoming needs. 

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 2010113357
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 11/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer II

Description:
A Structural Engineer II job in Englewood, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance required

Structural Engineer II Job duties:

* Examine complex metallic and composite structures and systems
* Familiarity with aircraft structure/construction
* Familiarity with industry standard analytical methods (Niu, Bruhn, etc.)
* Experience in both classical structural analysis and finite element analysis of metallic and composite aircraft primary and secondary structure
* Ability to prioritize workloads and show flexibility to changing situations / demands
* Ability to communicate with all levels of management, customers, and individual contributors

Qualifications:

* Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience
* Demonstrate working knowledge of regulatory and applicable airworthiness criteria including Mil-hdbk-516C and/or 14 CFR Part 25 and Part 23
* Knowledge and experience of aircraft modification programs
* Experience in damage tolerance analysis of metallic aircraft structure
* Experience with MSC Patran/Nastran or Siemens Femap/NX Nastran
* Solidworks and/or CATIA experience. Understands Product Lifecycle Management
* Experience in Structural Dynamics/Vibration analysis
* Experience with narrow body transport category aircraft
* Experienced in execution of government contracts
* Experience in integrating mission systems across a wide variety of primary/secondary structure
* Experience in VBA programming

If you are interested in this Structural Engineer II job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 305460
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Structural Mechanic

Description:
Chipton-Ross is seeking 2 Structural Mechanics for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate
difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines,
hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring
equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

PREFERRED EXPERIENCE:
Prefer F/A-18 structures experience.

EDUCATION:
Accredited High school diploma or equivalent.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186632
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 11/28/2020
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Tool Designers -- Many new long term programs in Missouri

Description:
UG NX background, aerospace or aircraft background

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Tool Designers -- Many new long term programs in Missouri

Description:
UG NX background, aerospace or aircraft background

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Back to Advanced Job Search