Job Search Results

156 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/11/29 Monday 10:25PM Pacific Time by ContractJobHunter. )

Listings 1 - 156

Go To My Job Tracker

Expand all descriptions

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Electrical Engineers Needed

Description:
2 openings for Electrical Engineers to support an A321 passenger to freighter conversion / Dragon program.

They will be onsite in Wichita, KS. Period of performance is ~5 months each assuming a start in the next few weeks. We can accommodate a wide variety of skills, but they will need to have some experience with Airbus doing electrical Wire Diagrams, Wire routing, and potentially some experience doing electrical based reports supporting certification. Primary CAD package they will use is AutoCad. Someone with 5 years’ experience or greater is acceptable.


The Structures Company LLC is an AA/EOE.
 
Job Number: 512
Job Location: Wichita, KS
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: No
Duration: 5+ Months
Start Date: ASAP
Input Date: 09/28/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer (Thermal Analysis)

Description:
Job details: Aeronautical Engineer
Job location: Fort Worth, TX
Job clearance: Must have an Secret Clearance

Job description:
Candidate will develop and analyze complex thermal management system architectures (Environmental Control Systems (ECS), and/or Power and Thermal Management Systems (PTMS)) and structural temperatures for next generation air vehicle platforms. Experience in thermal structural modelling and analysis of complex structures required. Responsibilities include modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools, and summarizing work and presenting to internal and external customers.

Strong experience with common thermal analysis tool sets with ability to develop tools for analysis automation and optimization are desired. Experience with Matlab/Simulink, high-level programming language(s) (C, C++, Fortran, Python, etc.), and advanced engineering analysis and CAD packages is highly desirable.

Must be self-motivated with a strong work ethic, communication and presentation, time management, and interpersonal skills able to work in a fast-paced, dynamic environment.

Comments:
Thermal analysis experience required
Must have experience in at least one of the following: C, C++, or Fortran
Bachelor’s degree or Equivalent relevant experience required
Experience in Heat transfer and thermo dynamic analysis required
Experience with Thermal analysis tools required

Sinda experience preferred
 
Job Number: CJH - 6843-1
Job Location: Fort Worth, TX
Rate: $95/hr
Per Diem: Split
Overtime: Yes
Duration: 12 Months
Start Date: Asap
Input Date: 09/29/2021
Last Updated: 10/13/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cable Harness Design Engineer

Description:
RESPONSIBILITIES:
• Design of electrical harnesses for power distribution, RF, communication and high-speed data signal
• Selection of harness components and hardware, connectors, backshells, cable and wire
• Understanding and application of EMI/RFI and harness shielding
• Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
• Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
• Design and integration of harness support brackets
• Support design configuration development and trade studies
• Provide technical guidance for hardware installation
• Support the assembly and testing of cables and harnesses
• Report on activity schedule and technical status
• Identify opportunities for technical improvements
QUALIFICATIONS:
Required
• B.S. degree or higher in Mechanical or an appropriate engineering field
• 5+ years of experience designing Wire Harnesses for the Aerospace industry
• Experience with Creo and Windchill and Routed System Designer (RSD)
• Understanding and application of wire derating analysis
• Familiar with existing applicable harness standards: IPC/WHMA-A-620A, NASA-STD-8739.4
• Strong electrical/mechanical design and integration skills using 3-D CAD software
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Desired
• Experience with Pro/E Piping.
• Experience with other high-end CAD routing software such as Unigraphics NX Electrical and Mechanical Routing
• Knowledge of harness fabrication and installation processes.
• Experience with launch vehicle or spacecraft electrical/mechanical systems
 
Job Number: 20372
Job Location: Kent, WA
Rate: $70 - $80 Per Hour W-2
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/06/2021
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Todd Gerber
Address: 6870 W 52ND AVE STE 107
City, State: ARVADA, CO 80002
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electromechanical Liaison Engineer

Description:
RESPONSIBILITIES:
• Coordinate communication between the IRMS team and the other Avionics and rocket systems and subsystems teams
• Support and coordinate feedback received from the harness manufacturing suppliers/sites
• Support and coordinate feedback received from the harness installation site
• Support and coordinate any required harness testing
• Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD) for trade studies
• Support change incorporation issues by providing impact assessments
• Support design configuration development and trade studies
• Provide technical guidance for hardware installation
• Maintain and report on activity schedule and technical status
• Identify opportunities for improvements and operational cost and schedule savings
QUALIFICATIONS:
Required
• B.S. degree or higher in Mechanical or an appropriate engineering field
• 10+ years of experience designing Wire Harnesses for the Aerospace industry
• 5+ Experience as a liaison engineering
• Experience with high-end CAD routing software such as Unigraphics NX Electrical and Mechanical Routing
• Knowledge of harness fabrication and installation processes.
• Familiar with existing applicable harness standards: IPC/WHMA-A-620A, NASA-STD-8739.4
• Strong electrical/mechanical design and integration skills using 3-D CAD software
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Desired
• Experience with Pro/E Piping.
• Experience with Creo and Windchill and Routed System Designer (RSD)
• Experience with launch vehicle or spacecraft electrical/mechanical systems.
 
Job Number: 20371
Job Location: Kent, WA
Rate: $80 - $95 Per Hour W-2
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/06/2021
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Todd Gerber
Address: 6870 W 52ND AVE STE 107
City, State: ARVADA, CO 80002
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Supply Chain Analyst

Description:
A Buyer/Supply Chain Analyst in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will thrive in a fast-paced role, and will work on supply chain and inventory management tasks in order to develop and maintain robust operational performance, and optimize production throughput, quality, and cost. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Buyer/Supply Chain Analyst job duties:
* Maintain supply chain obligations including but not limited to delivery lead-times, budget requirements, supplier/vendor relationships, quality and function specifications
* Source and procure all components, effectively and efficiently
* Maintain and improve a physical inventory organization system to ease material replenishment review, including subsequent purchases as required to fulfill production demands
* Communicate with supply base to ensure on time delivery and elevate delivery requirements, as needed, to meet production goals;
* Prepare and send RFQs; Create RMAs and shipments
* Complete incoming inspections of materials in a timely manner;
* Perform 'kitting' of jobs as sales orders are received and inventory needs are defined;
* Create and maintain appropriate documentation including, but not limited to, traceability materials/certifications, workflows and quality records;
* Monitor supplier and production controls and measures for existing and new products;
* Participate in or support troubleshooting and root-cause analysis of quality events; support process owners in the planning and implementation of corrective measures;
* Lead or support negotiations with customers concerning fulfillment of their quality demands and/or resolution of quality deficiencies including preparing customer-facing documentation;
* Support the implementation of an AS9100 quality management system.

Qualifications:
* Bachelor of Science in Engineering or a related field from an accredited college or university;
* Prior experience or training in quality assurance, supply chain, or manufacturing preferred
* High degree of competency in Microsoft applications including Word, Excel, Project, and Outlook
* Proficient in the use of CAD systems (Solidworks or NX preferred) and able to work with/interpret engineering drawing
* Understanding of manufacturing methods (such as machining, forming, soldering, and fabrication)
* Understanding of electronic assembly materials and processes
* Familiar with Military / Aerospace specifications and compliance systems such as MIL-STD-810, MIL STD-461, and DO-160.
* Experience with project management, documentation practices and with AS-91000 preferred
* Occasional travel required.
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE



If you are interested in this Supply Chain Analyst job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 316589
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/25/2021
Last Updated: 11/01/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

CAD Designer 4

Description:
PDS is seeking a CAD Design Engineer in Palm Bay, FL

Active Top Secret/SCI Clearance is required 

Job Description:

Performs a wide range of CAD design assignments in support of the mechanical engineering organization including the creation of models and/or layout drawings from sketches, notes provided by engineering. This position will lead CAD design tasks assuring that the design documentation complies with the program requirements, organization’s processes and industry standards. Prepares accurate drawings and schematics with proper tolerances, dimensions and instructions. Essential functions include:
  • Work with large, complex CAD design initiatives of substantial importance to the organization with minimal oversight or direction.
  • Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches.
  • Makes significant improvements in CAD design processes, systems, or products.
  • Provide technical oversight to more junior CAD designers
  • Mentor CAD designer in drafting best practices, tolerancing and standards.  
  • Provide CAD support (PTC Creo) throughout the product development process
  • Generate and/or modify product’s models, drawings and documentation
  • Maintain and control mechanical digital data files and drawings
  • Prepare and incorporate engineering change orders
  • Input data and manage hardware structures in a Product Data Management tool
  • Identifies problems/issues in CAD design/drawings and provide corrective actions.
  • Compliance with command media & standard

Qualifications:
  • Active TS/SCI security clearance is required 
  • Comprehensive knowledge in the product development process.
  • Associate Degree and minimum 10 years prior related experience.
  • Bachelor’s Degree and minimum 6 years prior related experience.
  • Have broad knowledge of project management
  • Proficient with 3D CAD tools, specifically PTC Creo Parametric.
  • Knowledge of applicable government and industry standards
  • Strong understanding of the ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.

Preferred Additional Skills:

  • In-depth knowledge of project management is highly desired
  • Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
  • Previous experience in supporting the design of ground structures, mechanisms, electronics packaging, and/or composite structures

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments throughout the U.S. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Kerry Moreland at 972-532-3584 or kmoreland@pdsdefense.com for more information.
 
Job Number: 2110140065
Job Location: Palm Bay, FL
Duration: 12 months
Input Date: 09/28/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kerry Moreland
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j9aJQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer 4 - Top Secret / SCI

Description:
Active Top Secret/SCI Clearance is required

Job Description:

Performs a wide range of CAD design assignments in support of the mechanical engineering organization including the creation of models and/or layout drawings from sketches, notes provided by engineering. This position will lead CAD design tasks assuring that the design documentation complies with the program requirements, organization’s processes and industry standards. Prepares accurate drawings and schematics with proper tolerances, dimensions and instructions.

Essential functions include:
Work with large, complex CAD design initiatives of substantial importance to the organization with minimal oversight or direction.
Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches.
Makes significant improvements in CAD design processes, systems, or products.
Provide technical oversight to more junior CAD designers
Mentor CAD designer in drafting best practices, tolerancing and standards.
Provide CAD support (PTC Creo) throughout the product development process
Generate and/or modify product’s models, drawings and documentation
Maintain and control mechanical digital data files and drawings
Prepare and incorporate engineering change orders
Input data and manage hardware structures in a Product Data Management tool
Identifies problems/issues in CAD design/drawings and provide corrective actions.
Compliance with command media & standard
Qualifications - External
Qualifications:
Active TS/SCI security clearance is required
Comprehensive knowledge in the product development process.
Associate Degree and minimum 10 years prior related experience.
Bachelor’s Degree and minimum 6 years prior related experience.
Have broad knowledge of project management
Proficient with 3D CAD tools, specifically PTC Creo Parametric.
Knowledge of applicable government and industry standards
Strong understanding of the ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
Preferred Additional Skills:
In-depth knowledge of project management is highly desired
Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
Previous experience in supporting the design of ground structures, mechanisms, electronics packaging, and/or composite structures
PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries. These are long term assignments throughout the U.S. Client is accepting resumes now for review. Please connect with us now for immediate consideration.
 
Job Number: 2110140065
Job Location: Richardson, TX
Rate: Provide Your Rate
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 09/30/2021
Last Updated: 10/13/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kerry Moreland
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

CAD Designer Specialist

Description:
PDS Tech is seeking CAD Designer Specialists near Wilmington, MA. 

This position will be responsible for providing Design support to customer-funded programs and internal research efforts within our Intelligence, Surveillance and Reconnaissance (ISR) business units. Our intelligence, surveillance, and reconnaissance (ISR) solutions serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability airborne and space-based remote sensing payloads that offer active and motion imaging and data processing, exploitation, and dissemination. We also provide solutions that map and monitor the earth for a variety of commercial and governmental users.

Responsibilities:
  • Provide CAD support (Autodesk Inventor) to engineers and other designers.
  • Generate new drawings and documentation, as well as modify existing drawings and documentation.
  • Manage and control mechanical digital data files and drawings.
  • Prepare and incorporate engineering change orders.
  • Input data and manage hardware structures in a Product Data Management tool (Vault).

Qualifications:
• Associates Degree and a minimum of 8 years of prior related experience or Bachelor’s Degree and a minimum of 4 years of prior related experience, or equivalent.
• Bachelor’s Degree and a minimum of 2 years of prior related experience or 2 years post-Secondary/ Associates Degree and a minimum of 6 years of prior related experience

Preferred Additional Skills:
• Expert knowledge in 3D parametric CAD modeling and PDM systems. Experience with Inventor and Vault highly desirable.
• Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
• Knowledge of applicable government and industry standards including ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
• Strong understanding and application of Geometric Dimensioning and Tolerancing.
• Previous experience in designing electro-optical and opto-mechanical payloads and sub-systems for aerospace & military defense applications.
• Experience in developing interfaces between spacecraft, payload systems, and sub-assemblies is highly desired.
• Previous experience in supporting the design of space structures, mechanisms, electronics packaging, and/or composite structures.
• Outstanding oral, written and presentation skills for interfacing with senior management and customers.
• DOD secret security clearance desired.

Security Clearance:
Please be aware this position requires the ability to obtain a Security Clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

 
Job Number: 2110135056
Job Location: Wilmington, MA
Duration: 6 months
Input Date: 07/19/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxeIQAS&URLSource=cjhunter

CAD Operator

Description:
PDS Tech, Inc. is seeking a CAD Operator, in Chandler, AZ.

Job Summary:

The selected candidate will work within the client's Design group and will be responsible for creating drawing/design packages with proper content and to ensuring compliance with applicable industry and military standards. Duties will include reviewing designs for fit, function, manufacturability, and economy of fabrication. This includes review of tolerance analysis, hardware selection and fitment on assembly prints. The candidate shall be well-versed in GD&T and will be called upon to resolve interpretation issues on drawings. Additional duties include verifying 3D models submitted to manufacturing utilizing Siemens NX 12 managed with Teamcenter. Responsibility will further include liaison with various engineering disciplines, Manufacturing, and Quality. Some vendor liaison will be required as well.
Additional responsibilities to include modeling fully defined components and assemblies efficiently using Siemens NX 12 managed with Teamcenter, and create/revise parametric drawings in conformance with ASME modeling and drawing standards.

Job Responsibilities:
1. Create and review mechanical drawings with appropriate personnel verifying completed work, checking dimensions, materials and quantities to be used.
2. Mechanical modeling using NX 12 managed with Teamcenter.
3. Create/Revise parametric drawings in conformance with ASME 3D modeling and drawing standards.
4. As requested, may supervise and direct the activities of staff.
5. Perform related duties as assigned or required.
o Knowledge of Word, Excel, Windows and NX 12 as required.
o Good communication skills, both written and verbal.
o Ability to work quickly and accurately while under schedule pressure and exhibit a large degree of patience.
o Strong time management and organizational skills

Education and Experience:
• 2-year Technical Degree in Drafting or Engineering and 10 years directly related experience or BS in Engineering and 7 years of related experience.
• Must be experienced with geometric dimensioning and tolerating per ASME Y14.5-2009. GDTP Professional Certification Preferred.
• Must be experienced with weld design per AWS D17.1 and D1.1. AWS CWI Certification Preferred.
• Must be a U.S. Citizen and ability to obtain DoD security clearance.
• Experience working with DoD programs preferred.
• Must have knowledge of standard manufacturing processes including CNC Mill and Lathe operations.
• Must be experienced with Siemens NX 12 and Teamcenter.
• A working knowledge of ASME Y14.100 and Mil-Standard 100 is also desired.
• Ability to work independently as well as in a team environment.
• Candidate must be comfortable working extended periods of time at a workstation.

 
Job Number: 2110138504
Job Location: Chandler, AZ
Duration: 12 months
Input Date: 09/02/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Nicole Emfinger
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j3ioQAA&URLSource=cjhunter

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

CNC Machinist

Description:
The CNC Machinist is responsible for the effective set-up, operation and trouble shooting of new and existing parts and production lots, as well as successfully detecting malfunctions in machine operations.  This position is responsible for operating computer numerical control (CNC) machines to produce quality parts in accordance with detailed engineering drawings to very tight tolerances. Will work with CNC machining centers, CNC multi-spindle drilling machines and other manual drilling machines, single spindle mills, press brakes, and measuring equipment. May edit programs for CNC equipment and interpret geometric tolerances on drawings in order to manufacture parts to specifications.


JOB DUTIES
 
  • Follows all established company policies, rules and regulations, ISO procedures and work instructions.
  • Works from CAD drawings, sketches and verbal instructions to interpret, plan and lay out own work.
  • Will set up, load parts and operate multiple types of machining equipment in a safe manner, in order to produce Quality parts on a timely basis to very close tolerances.
  • Interpret existing CNC programs and edit if necessary in order to set up and operate CNC machines.
  • Reviews sequences of machining operations, speeds, feeds and continually offers input in regards to improving the methods of production.
  • Participates in the design and machining of special tooling or fixtures required to manufacture piece parts.
  • Input of CNC programs for new parts, utilizing knowledge of numerical control machine operation.
  • Calculates and codes machine controlling criteria, such as axis movement, type and size of cutting and drilling tools, spindle location, machining start.
  • Monitors and changes tools as required.
  • De-burring parts as required to meet quality requirements.
  • Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls media as required to insure quality of production.
  • Uses coordinate measuring machines (both Manual and an automated vision system) and hand measuring tools to perform quality inspections. Does a first piece inspection and paperwork of own work, along with monitoring quality parameters on machined parts in-process using inspection sheets.  Performs dimensional inspection of products as required for conformance to quality requirements. 


      

 
Job Number: 2110139381
Job Location: Osseo, MN
Duration: 3 months
Input Date: 09/17/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Leah Swan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6ixQAA&URLSource=cjhunter

Defense CNC Programmer

Description:
A CNC Programmer job is currently available at Belcan in Wichita, KS. This is a full time, direct position with Belcan and comes with full benefits. Great matching candidates will have several years of CNC Programming and hands on experience in a shop floor & assembly environment. You will be a vital team member on large and medium size programs and projects, presenting information as needed, and ensuring critical customer needs are met.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

CNC Programmer Job Duties:
* Provide numerical control, machining, and programming technical expertise to support 4 / 5 axis machining and turning NC programs
* Develop programs from model-based definition using assigned CAM software: CATIA
* Utilize Vericut validation software for NC program
* Analyze blueprints, engineering models, and electronic controls to support NC programming
* Work with CNC machine operators to optimize or modify programs as required
* Plan, create, verify, and revise machine control data and documentation that directs the operations for numerically controlled machines
* Develop a tooling list for each program
· Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and
programming, cutting tools, components and parts, unique parts, scrap, etc.

CNC Programmer Qualifications:
· Five to 15+ years of relevant work experience as a CNC Programmer/ Manufacturing Engineer.
· Proficient CATIA knowledge; we will consider experience with other CAM software
· Experience and working knowledge of manufacturing process, assembly, and fabrication process.
· Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
· Experience creating and updating technical documents, reports, and standards.
· Excellent oral and written communication skills.
· Extensive understanding of product engineering concepts and applications.
· Ability to be a self-starter with potential for technical leadership and guidance.
· Strong analytical reasoning and problem-solving skills.
· Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.

Desired but not required skills:
· Mechanical aptitude and an understanding of design for manufacturing concepts.
· Hands on experience in the shop/manufacturing environment
· Understanding of Mechanics of Materials and Structural Design.
· Knowledge of CAD Modeling (2D, 3D).
· Proficiency in MS Office products
· Experience with Cost reduction.
· Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this CNC Programmer job Wichita, KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 312574
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
City, State: Belcan - Recruiting
Email: kfabing@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=312574&job_number=312574

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
CNC Programmer

Location: Euclid, OH

Job ID: #62048

12 month contract



Min years of experience: 5

Degree Requirements: Minimum of a high school diploma or equivalent, preferably in a high school career machine trades program and strong experience in CNC Programing

Machining experience. Experience programming for a SWISS lathe in the Espirit SPREE environment is a must.





PURPOSE: The CNC Programmer creates machining instructions. This work often includes reviewing three-dimensional computer-aided/automated design (CAD) blueprints, determining where to cut, and other calculations. The programmer then translates the instructions into a computer aided/automated manufacturing (CAM) program. The programmer and/or the operator of the machine check the program through first piece run off and first piece inspection approval.



DUTIES/RESPONSIBILITIES:

• Creates setup sheets with tooling and work-holding details

• Creates programs to control the operation sequence and cycling of CNC turning centers

• Utilizes drawings or CAD models to support program development

• Utilizes ESPRIT CAM software to produce programs

• Supports process optimization and machine utilization with updates as necessary

• Provides input on process decisions and strategies

• Experience performing full set-ups, program edits...

12 Months temporary assignment, South Euclid, Ohio
Experience programming for a SWISS lathe in the Espirit SPREE environment is a must.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62048
Job Location: Euclid, OH
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 10/28/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1

Description:
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
12 month contract

Pay rate: $55-60/hr W2

Analog / Mixed-signal Circuit Design Engineer

Electrical engineer to design board level electronic circuits and equipment for aerospace avionics.
Requirements:
-BSEE and 5 years, or MSEE and 3 years of mixed signal circuit design experience.
-Proficiency with simulation, Pspice and Cadence Schematic Capture.
-Proficiency in hardware troubleshooting / software debugging.
-Physical testing experience including proficiency with lab measurement equipment (oscilloscope, logic analyzer, etc).
-Ability to clearly communicate complex technical concepts verbally and in written form.
Position includes generation of design documents, specifications, user's manuals, test plans, analyses, etc.
 
Job Number: 4016-1
Job Location: Chandler, AZ
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/28/2021
Firm Name: TALENTPRO CONSULTING
Attention: Angelia
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: Angelia@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Blades Design Engineer

Description:
Blades Design Engineer

Location: West Lafayette, IN - potential for remote work

Job ID: #62189



Citizenship Requirement: US Citizen / No dual citizen

Min years of experience: 5 years’ experience with composite design of blades



Degree Requirements: BS in Engineering or Engineering Technology / or relevant engineering experience



Experience with surfacing, solid modeling, and drafting of composite blades
CAD Software: CATIA V5, 3DX
Experience using Composites workbench (CPD) for CATIA V5, 3DX
Composite Tooling (molds, trim tools) design preferred
Helicopter blade experience preferred
Experience with ENOVIA LCA a plus
Prior Lockheed or Sikorsky experience a plus




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62189
Job Location: Remote
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/29/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV

Description:
Inconen is looking for a Creo Product Definition & Verification (Checking) Designer III/IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret clearance is preferred but not required **
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.

Typical responsibilities include:
-Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 16885
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 09/12/2021
Last Updated: 10/18/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
12 month contract

Designs major components, or major portions of a functional system, or technically advanced prototype, promotional or specific products.
Develop or improve products and facilitate manufacturing operations.
Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development.
Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products.
Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

Must Have Skills:
CAD- preferably CATIA V4 or V5
Experience reading engineering drawings

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61911
Job Location: Fort Worth, TX
Rate: DOE
Overtime: possible
Duration: 12 month contract
Start Date: Oct 2021
Input Date: 10/06/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Design Engineer - Level 3 / Level 4

Description:
Inconen is looking for a Design Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using Pro-E/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineer’s research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 16884
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Design Engineer - Level 3 / Level 4

Description:
Inconen is looking for a Design Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

** Secret Clearance not required but preferred **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate's resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred **
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using Pro-E/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineer's research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Additional Skills:
-Target mechanical experience
-CREO 5 (working level experience)
-Windchill Product Lifecyle Management (PLM) experience
-Pressurized fluid systems (gas and liquid)
-High pressure systems 10,000 psi gaseous and 2000 liquid
-Machined hardware (subtractive manufacturing)
-Additive manufacturing (some…may 10%)
-Component design
-Hardware integration
-Joining methods – Welding, bolted joints, mechanical fittings
-Stainless steel tubing for fluid routing – bent tubing, orbital welding, mechanical end connections, ¼” to ¾” diameter, .027 to .035 wall thickness
-Integration - thrusters, valves (often times supplier parts), pyro valve, regulators, orifices, ancillary hardware such as machined custom brackets to off the shelf p-clamps.
-Materials – 300 series SS, Inconel, Aluminum, Titanium
-Material compatibility considerations to Hydrazine and N2O4. Helium, Nitrogen, Argon
-Experience working with integrated product teams
-Experience working with analysis teams to evaluate structural margins (to include CAD model preparation for meshing)
-Geometric Dimensioning and Tolerance Specification knowledge and practical application to include tolerance stackups
-Mechanical part selection (picking out bolts, washers, o-ring, Teflon seals, p-clamps, etc.) and preparing the geometry in the hardware under design
-Machine shop experience desired
-Precision, tight tolerance machined hardware (some tolerances down to +/- .001)
-Needs to have ability to prepare and present designs for team review
-Self-starter, deadline driven

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 17002
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Digital Channel Planning Analyst

Description:
PDS Tech, Inc. is seeking a Digital Channel Planning Analyst, in Austin, TX.

Roles & Responsibilities 
•    Develop the structure to track annual team goals, deliverables and roadmaps
•    Drive annual planning process with the team
•    Build and run cadence for team meetings, communications and leadership updates
•    Develop presentations and required communications
•    Plan and manage teams’ opex and capex plans 
•    Conduct market research and analysis to inform business decisions as required
•    Provide ad-hoc support on projects small to large scale
•    Additional responsibilities as periodically assigned

Requirements
•    Bachelor’s degree (MBA preferred)
•    Background in eCommerce and strategic consulting preferred
•    Demonstrated ability to be entrepreneurial and a self-starter
•    Ability to story tell and develop executive presentations
•    Advanced understanding and usage of Keynote (or equivalent) 
•    Ability to multitask and understand how to prioritize tasks based on importance vs. immediacy
•    High EQ and strong interpersonal skills
•    Ability to formulate budgets and financial models
•    Comfortable working in time-sensitive and rapidly evolving situations
•    High tolerance for ambiguity and complexity, while being efficient with limited resources
•    Level of attention to detail that is second to none
•    Excellent oral and written communication skills 

 
Job Number: 2110139964
Job Location: Austin, TX
Duration: 6 months
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j92wQAA&URLSource=cjhunter

Digital Verification Engineer

Description:
A Digital Verification Engineer job in Redmond, WA is currently available through Belcan. This will be a full-time direct hire opportunity. In this role, you will be responsible for supporting the automotive 3D LiDAR sensing application. This is a great opportunity to become a key member of the digital team bringing your experience and vision to designing prototype hardware. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or a related discipline and 1 or more years of relevant experience.

Digital Verification Engineer Job duties:

* Develop self-checking test benches using standard verification techniques.
* Develop directed/constraint-random test cases.
* Run RTL and gate-simulations, debug problems.
* Running and triaging regressions, tracking bugs, and analyzing coverage.
* Supporting automated regression and test Linux environment.

Qualifications:

* BS in Electrical Engineering or related field and 1+ years of experience or equivalent
combination of education and experience.
* A solid understanding of object-oriented concepts and experience designing class-based test
benches.
* A solid understanding of object-oriented concepts and experience designing class-based test
benches.
* Knowledge of System Verilog/OVM/UVM.
* Python or similar scripting language.
* Experience with HDL simulators (Mentor, Cadence, Synopsys etc).

If you are interested in this Digital Verification Engineer position in Redmond, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 317007
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/09/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=317007&job_number=317007

Elect Design and Analy Engr 4

Description:
Chipton-Ross is seeking 2 Electrical Design and Analysis Engr 4's for an opportunity in Tukwila, WA.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

We are seeking experienced integrated circuit (IC) layout engineers to implement custom analog/mixed-signal circuits in state-of-the-art CMOS (=22nm) and SiGe semiconductor fabrication processes. The qualified candidate will have experience performing custom IC layout to achieve tight matching, high speed, low noise, and low power consumption. Circuits for custom layout may include analog or digital standard cells, resistors and capacitors, IO cells, ESD structures, and SRAM leaf cells.
Tasks/responsibilities include:
Working closely with IC / chip design team on block-level and chip-level floor-planning
Performing cell-level layout, block-level layout, and chip assembly
Performing physical verification including design rule checks (DRC), layout vs. schematic (LVS) checks, and electrical rule checks (ERC)
Perform / support parasitic extraction (PEX) and analysis
Drive continued improvement of layout practices and procedures

REQUIRED EXPERIENCE:
6+ years of experience in full-custom analog/mixed-signal IC layout
Thorough understanding of industry-standard electronic design automation (EDA) tools for IC layout and physical verification e.g. those from Cadence, Mentor Graphics, and Synopsys
Experience with standard cell development and/or familiarity with structured, pitched, or arrayed layout
Knowledge of performance analog and high-power layout techniques
Experience exercising and debugging the IC verification flow (DRC, LVS, XOR, PEX, etc.)
Demonstrated successful IC designs implemented in advanced commercial semiconductor fabrication process technologies e.g.. <22nm FinFET), silicon-on-insulator (SOI), and/or silicon germanium (SiGe) processes. Experience with layout techniques for managing IR drop, RC delay, electromigration, self heating and coupling capacitance Preferred Qualifications: Experience with Radiation-Hardened By Design (RHBD) layout techniques Experience with scripting to automate IC layout (e.g. SKILL, Perl, Python) Experience with experimental process technologies (e.g. Gate-all-around FETs (GAAFETs)) EDUCATION: Accredited Bachelor, Master or Doctorate degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. TRAVEL: YES Possible domestic trave WORK HOURS: 7:00AM-3:30PM Full-Time/First Shift ADDITIONAL INFORMATION: Can be virtual but possible travel to onsite location as needed.
 
Job Number: 192194
Job Location: Tukwila, WA
Rate: $DOE
Duration: 6 Months
Input Date: 09/17/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Dan Mulvihill
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmulvihill@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical CAD Designer (Cable Routing)

Description:
Electrical Designer – Cable Routing
TriMech is currently supporting several defense contract efforts in the support of US Airforce in the Cincinnati, OH & Florence, KY markets. We are looking to hire electrical designers to support these efforts.
Essential Duties and responsibilities include but not limited to:
• Provide electrical design support for military vehicle systems and trailer systems
• Create schematic drawings, cable drawings, and wire harness drawings
• 3D Modeling of harness assemblies for drawings and depiction of cable routing in vehicle systems integration team
• Drafting of wire, cable, and harness assembly drawings for use in prototype and production fabrication.
• Provide Cable Routing Designs and Drawing via CAD preferably NX Cable Routing Module
. Requirements:
• 5+ years’ experience with computer aided design (CAD) software, preferably NX CAD, Creo Parametric, Schematics and Cabling. Acceptable alternatives include Pro/E Wildfire, Solid works, NX, and equivalents.
• Experience with PLM software, preferably Windchill. Acceptable alternatives include Team Center, SharePoint, and equivalents.
THIS IS A CONTRACT POSITION

If you are interested in this Electrical Designer job with our client in Florence KY, please apply via the 'apply now' link provided.

TriMech is a specialized provider of qualified technical personnel to companies in both defense and commercial workspaces. We offer excellent opportunities for contract and fulltime roles supporting defense programs with a focus in the engineering, manufacturing and produce development
 
Job Number: 10640
Job Location: Florence, KY, KY
Rate: Hourly
Per Diem: Possible
Overtime: Possible
Duration: 18 mos
Start Date: ASAP
Input Date: 10/13/2021
Last Updated: 10/20/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Mike Ayres
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer (NX CAD)

Description:
Electrical Designer – Schematic Design

TriMech is currently supporting several defense contract efforts in the support of US Airforce Efforts in the Cincinnati, OH & Florence, KY markets. We are looking to hire electrical designers to support these efforts.

Essential Duties and responsibilities include but not limited to:

Design and drafting of block interconnect and schematic diagrams for box level systems.
Modeling of 3-D harness assemblies for drawings and depiction of routing in vehicle systems
Drafting of wire, cable, and harness assembly drawings for use in prototype and production fabrication.
Use of parametric capabilities to transfer schematic info to harness and use to create conductor details and parts lists.
Organize products in the Product Lifecycle Management (PLM) system and maintain version control.
Coordinate with engineers and mechanical design teams to produce electro-mechanical parts.
Assist in preparation and tracking of purchase requests for materials necessary to realize designs.
Collaboration and follow-up with fabrication and installation teams to maintain design intent.
Possible travel <5% for survey and system development. Other duties as required. . Requirements: 8+ years’ experience with computer aided design (CAD) software, preferably NX CAD, Creo Parametric, Schematics and Cabling. Acceptable alternatives include Pro/E Wildfire, Solid works, NX, and equivalents. Experience with PLM software, preferably Windchill. Acceptable alternatives include Team Center, SharePoint, and equivalents. Secret security clearance. THIS IS A CONTRACT POSITION If you are interested in this Electrical Designer job with our client in Florence KY, please apply via the 'apply now' link provided. TriMech is a specialized provider of qualified technical personnel to companies in both defense and commercial workspaces. We offer excellent opportunities for contract and fulltime roles supporting defense programs with a focus in the engineering, manufacturing and produce development. For more information, please visit our website at https://trimech.com/staffing/job-seeker
 
Job Number: 9967
Job Location: Florence, KY
Rate: Hourly
Per Diem: Possible
Overtime: Possible
Duration: 18 mos
Start Date: ASAP
Input Date: 10/19/2021
Last Updated: 10/20/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Mike Ayres
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Electrical Engineer

Description:
PDS Tech is seeking an Electrical Engineer for an open position in Florence SC

The ideal candidate will:
  • Be responsible for supporting electrical system design and integration activities in the Company's Engineering department.
  • Be responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
  • Utilize knowledge of power components, distribution and protection, and controls theory and application.
  • Provide product support for a variety of electronic elevator components and electrical systems.




 
Must possess at least a Bachelor's or its equivalent in Electrical Engineering and at least five (5) years of work experience in an Electrical Engineering field.  In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three (3) years of work experience in an Electrical Engineering field would be acceptable.

Must also possess the following:
  • Working knowledge of power distribution, protection and control systems;
  • Experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application;
  • Electrical engineering background with wiring diagrams, system analysis, motor and control applications;
  • Experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3;
  • Experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and
  • Experience with test and measurement equipment.


Any suitable combination of education/training and/or experience would be acceptable.

 
 
Job Number: 2110138652
Job Location: Florence, SC
Duration: 12 months
Input Date: 10/08/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j4WrQAI&URLSource=cjhunter

Electrical Engineer (Elevator Industry)

Description:
PDS Tech is seeking an Electrical Engineer for an open position in Florence SC

This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to:

  • Read and understand schematics, wiring diagrams, mechanical assembly drawings, building layouts in order to analyze complex problems and identify root cause issues and develop innovative solutions.
  • Have the ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel.


 
Education
Bachelor's Degree in electrical engineering with at least 3 years’ experience required.

Relevant industry experience strongly preferred.
MA/MS degree with 2 to 3+ years’ experience
BA/BS degree with 3 to 10+ years’ experience



Experience/Qualifications
Elevator Industry field experience will be given consideration

Preferred Skills

  • Sound electrical engineering background (wiring diagrams, systems analysis, motor and control applications, and control logic, electrical circuits, solid state power supplies, communication protocols, harnesses, power electronic components, motors, starters, relays and contactors, drives, transformers,)
  • Elevator systems knowledge
  • Experience working with national, local code and enforcement agencies. i.e. CSA, ASME, NFPA, TSSA, NEC
  • Experience working with suppliers/3rd parties
  • Experience with test and measurement equipment such a power quality meters, oscilloscopes, multimeters
  • General understanding of mechanical and software functions
  • Strong communications skills and leadership ability
  • MS Office applications (Word, Excel, Power Point, etc.)
  • ECAD tools (Cadence or E3 or Autocad Electrical)

 
Job Number: 2110138656
Job Location: Florence, SC
Duration: 12 months
Input Date: 08/27/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j4XBQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Digital - Secret Clearance

Description:
Roles and Responsibilities:
The individual will perform functional verification of register transfer level (RTL) code of a complex ASIC at block level and SOC level using UVM (Universal Verification Methodology) and SystemVerilog and Cadence Xcelium simulation tool.
This task includes but not limited to development of testbench, tests, verification IP (VIP), verification models, coverage models, extensive simulation and debug, code coverage and functional coverage, generation and analysis of reports and metrics, documentation etc.
This candidate will have an ability to operate in a team environment and collaborate across the different teams as required to accomplish the goals.
Qualifications - External
Basic Qualifications:
BS in Electrical Engineering, Computer Engineering, or comparable STEM discipline
9+ years of relevant experience (7+ years with an MS, 4+ years with a PhD)
Experience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC
Design
Working knowledge of digital signal processing and digital interfaces
Familiarity with Xilinx, Altera, and/or Actel FPGA technology
Experience leading a small project team to successfully complete ASIC Design or FPGA design
Be able to work in teams and communicate clearly across various levels of management and engineers
US Citizenship with the ability to obtain and maintain a Secret Security Clearance
Preferred Qualifications:
MS in Electrical Engineering, Computer Engineering, or comparable engineering discipline
Experience with MatLAB, Mentor Graphics design tools, Synopsys or similar tools
2+ years of experience working with Digital Signal Processing Algorithms and implementation
DOD Secret Clearance
 
Job Number: 2110139828
Job Location: Linthicum Heights, MD
Rate: 85.00
Per Diem: Yes
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 10/13/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kerry Moreland
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aide

Description:
Basic Qualifications:
• MUST HAVE PLC EXPERIENCE
• Interest in lean manufacturing and automation and Robotics • CAD software experience
• Ability to read and interpret engineering drawings
• and parts lists • Demonstrated capability to multitask in support of multiple concurrent programs and initiatives.
• Organization and strong communications skills.
• Proficiency with small hand tools and strong mechanical sense.
• Physical ability to work standing or sitting and occasionally crouching/kneeling.
Candidates must be able to read and interpret engineering drawings
 
Job Number: CJH-R-6818
Job Location: Manassas, VA
Rate: $28
Per Diem: no
Overtime: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 10/11/2021
Last Updated: 10/13/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

Engineering Technician II

Description:
Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!

As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

Must-haves:
*Associate's degree in a related field of study and at least 2 years of relevant experience
*A higher level degree may substitute for experience
*Related experience may be considered in lieu of required education
*Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
*Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Preferred:
*Previous experience and/or certifications within the aerospace and defense industry
*Previous experience in a manufacturing environment
*Experience with AutoCAD or other 3-D CAD software
*The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Middleton, WI
Rate: $25/HR - $29.50/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/04/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

GSE Project Engineer - Level 2 / Level 3

Description:
Inconen is looking for a GSE Project Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

**Project Engineer with Ground Support Equipment (GSE) experience is required**
**Aerospace Assembly Support Equipment Design Experience**
**Position requires knowledge of aerospace handling, installation and transportation methods and products to support**
**This position will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Solid Rocket motors**
**Experience in Design and Manufacturing is a must**
**5 to 10 years of experience and a Bachelors Degree or equivalent are required**


Duties:
-Under minimal supervision, performs engineering clean sheet design assessments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Product Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Solid Rocket Motors
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.
-Experience with lifting devices, transportation and handling.

Desired Skills:
-Experience with CREO Cad Software.
-Experience with over-road transport of critical items, including the permitting process for chemicals and explosives transport.

Education:
-Bachelor’s degree in Mechanical Engineering or Aerospace Engineering and 5-10 years of related technical experience as engineer or equivalent combination of education and experience.
 
Job Number: 16991
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Design Engineer - Level 2/3 - Level 3/4

Description:
Inconen is looking for a Harness Design Engineer - Level 2/3 - Level 3/4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Pay Range:
Level 2/3 = $50.00 - $60.00/HR
Level 3/4 = $70.00 - $80.00/HR

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
-Support Electro-Mechanical Packaging of wiring harnesses and generate appropriate CAD models and design drawings as required.
-Experience in design of STE cables and harnesses for Aerospace and Defense products applications.
-Proficiency in use of Creo PDM/Link and Windchill required.
-Additional proficiency with GD&T and tolerance analysis preferred.

Skills:
-Prior experience and detailed knowledge of Windchill PDMLink 10.1 (or greater)
-Previous experience with Lifecycle Management workflow, MODELCHECK, product structure, etc., preferred

Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
-Mechanism Design/Constraints
-Advanced part modeling techniques including the use of relations, analysis features, and flexible -components
-Top-Down Design using Reference Skeletons including Copy Geometry, Publish Geometry, Relative Datums and Shrink-wraps - Preferred

Preferred Experience with Creo Cabling application including:
-Utilizing logical reference data (automated Network routing using neutral wire format)
-Harness flattening using Creo Harness-MFG extension
-Preferred Working knowledge of Creo Schematics 2.0 (or greater) desired including:
-Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
-Schematics creation utilizing a Central Catalog

Education:
-BSME or equivalent with 10 years of experience or 15 + years of equivalent experience – L3/L4
-BSME or equivalent with 5 years of experience or 8 + years of equivalent experience – L2/L3
 
Job Number: 17003
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 10/06/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Industrial Designer

Description:
PDS Tech is looking for an Industrial Designer in Thief River Falls, MN or a remote opportunity:

SUMMARY:
  Create design concepts for existing and new products to develop attractive, innovative, ergonomic, user-friendly designs. 

RESPONSIBILITIES: - List the job’s essential or most important functions and responsibilities.  Include all important aspects of the job -- whether

Develop appealing design concept sketches.  Concepts include vehicle exterior, occupant compartment and cargo areas, accessories etc.
Work with engineering, product management, manufacturing engineering and sales to develop and evaluate design concepts for vehicles and accessories.
Research design trends for similar and adjacent products and apply research to design concepts.
Present designs to various internal departments as design reviews and participate in multidisciplinary team meetings. 
Arrange meetings and liaising with engineers and other departments, including marketing, to discuss and negotiate appropriate production processes, costs and commercial issues.
Research production materials and manufacturing processes and apply this knowledge to design concepts.
Develop CAD models, detail drawings and specifications for prototype components and vehicles.
Build prototype components and vehicles.
CAPABILITY REQUIREMENTS:
Technical knowledge regarding manufacturing processes, materials, dimensional control, and hands on creative ability.
Commercial, visual and spatial awareness are critical
Skilled with 3-D CAD, such as Unigraphics NX and other relevant industrial design software, such as Adobe Photoshop, Illustrator, InDesign, Keyshot etc…
Communication skills and ability build and maintain working relationships is critical.
Ability to cope with the pressure of due dates/project schedules
Knowledge and experience with prototype processes, such as metalworking, 3-D Printing, High-Density foam/woodworking, fiberglass and hand finishing of show parts.
Ability to manage a program.
Ability to complete a program from concept/sketch to production 
Ability to build accurate full scale clay models of your designs is a plus.

EDUCATION:
Applicants should have studied industrial design majoring in transportation/automotive design with  5+ years of studio experience in an automotive/powersports/vehicle studio
 
Job Number: 2110134604
Job Location: Thief River Falls, MN
Duration: 6 months
Input Date: 08/06/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pw6QQAS&URLSource=cjhunter

Liaison Engineer II

Description:
We are currently seeking a motivated and tenacious engineer who will support Assembly Integration and Test operations as a representative of spacecraft design.

The ideal candidate will excel in a demanding, fast-paced, and evolving environment where they will work as part of a strong, agile and highly motivated team to accomplish the first of its kind commercial winged-body spacecraft. This individual takes pride in his/her thoroughness, emphasis on follow through, interorganizational communication skills and attention to requirements conformance. The candidate will be able to problem solve from the component level to installation level addressing often first time problems and use strong logic and engineering tools to come up with solutions to problems that meet or exceed drawing and document requirements. A successful applicant will have the ability to thrive in a challenging multidisciplinary build environment, collectively solving build problems that require collaboration and agreement of the Design, Quality and Manufacturing organizations.

Liaison engineer team members are responsible as the primary interface for manufacturing floor activity for Cargo Module fabrication on the CRS2 program. Liaison’s goal is to ensure design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processes, design requirements and extensive collaboration with the internal teams designing and managing installations, this team is a key stakeholder to ensure that the overall build of CM design achieves all objectives.

Primary Responsibilities Include:
*Nonconformance (MRB)
*Assess, disposition, analyze, justify, determine cause and relay improvements for build discrepancies, errors and other nonconformance's.
*Provide guidance on when NC’s are appropriate vs other engineering change options, enforce process standards, and provide streamlined support to quickly address and close.
*Understand, prioritize, communicate and execute nonconformance against program schedule.

Engineering Change:
*Develop and utilize knowledge of various engineering change options, determine and execute the appropriate change option that creates the shortest path and meets engineering requirements for each unique problem.
*Document, prioritize, communicate, and track required engineering changes fed back to the spacecraft design organization for resolution.
*Work closely with manufacturing, quality, planning, and procurement teams to address changes and shepherd them through fruition on the production floor.
*Contribute to innovative, time saving, and cost-effective improvements to help streamline engineering change and response times.

Drawings, Processes and Technical Specifications:
*Provide guidance to technicians, engineers, and quality assurance engineers related to drawing and spacecraft requirements by overseeing installations; providing training, and information briefs on key topics.
*Support the development and maintenance of program specific technical specifications, and follow through on execution of these specifications to drive efficiency.
*Contribute to development and execution of standard repairs, analysis methods, and acceptable defects to streamline defects processing through MRB.
*Monitor existing processes and nonconformance trends to develop tools and other methods to reduce manufacturing build hours and quality issues, increase production rates, and remove waste from complex processes.

Must-haves:
*Bachelor’s degree in aerospace, mechanical, industrial or manufacturing engineering
Background in the aerospace industry preferred, but not required.
*3+ years, 1 years of which were in a manufacturing environment

Preferred:
*Aerospace propulsion, hydraulics, mechanisms design and build experience desired
*Familiarity with CNC machine control, especially automated tube bending
*Thorough understanding of welding, specifically TIG welding and orbital tube welding machines
*General knowledge of industry standard plumbing and piping system codes, including ASME B31.1/31.3 and D17.1
*Familiarity with common tube joining methods, including fittings and seals of various types
*General knowledge of aerospace NDE, including RT, UT, hydro/pneumatic testing
*Experience in design and build of primary and secondary composite structures
*Experience in design and build of metallic structures and fittings
*Proficient or familiar with hand calculation methods for structural analysis
*Proficiency preferred in NX CAD, but experience is another CAD package is acceptable
*Familiar with typical PLM architecture
*Excel, or similar data analysis software
*Experience with utilizing, developing, optimizing, interpreting and maintaining process specifications and work instructions
*Ability to influence without authority, tenacious, and highly energetic
*Able to adapt to a fast-paced and evolving work environment
*Confident and competent in communication across departments and at different levels of leadership
*Experience driving cross-functional changes to address specific technical problems
*Experience monitoring, tracking, and continually improving design via root cause analysis

Additional Responsibilities Include:
*This position will be shift work to cover 24/7 operations.
*Some shifts include weekend work, 3-6 month rotations between week and weekend shifts, and full time second shift based on the specific needs of production
*Position will require individuals comfortable working as the sole design representative if on 2nd or weekends
*Position may require split responsibilities between the Liaison and Design Engineering organizations.

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Denver, CO
Rate: $44/HR-$46/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer II (2nd Shift)

Description:
A Liaison Engineer II (2nd Shift) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for ensuring design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processed, engineering change processes, design requirements and extensive collaboration with the internal team designing and managing installations, this team is a key stakeholder to ensure that the overall build achieves all objectives. To be considered for this role, you will have a Bachelor's Degree in Aerospace, Mechanical, Industrial or Manufacturing Engineering and typically 3+ years of relevant experience.

Liaison Engineer II (2nd Shift) Job duties:

* Assess, disposition, analyze, justify, determine cause and relay improvements for build discrepancies, errors and other nonconformances.
* Develop and utilize knowledge of various engineering change options, determine and execute the appropriate change option that creates the shortest path and meets engineering requirements for each unique problem.
* Provide guidance to technicians, engineers, and quality assurance engineers related to drawing and spacecraft requirements by overseeing installations, providing interpretation, and information briefs on key topics.
* Contribute to development and execution of standard repairs, analysis methods, and acceptable defects to streamline defects processing through MRB.
* Document, prioritize, communicate, and track required engineering changes fed back to the spacecraft design organization for resolution.


Qualifications:

* Experience in design and build of primary and secondary composite structures.
* Experience in design and build of metallic structures and fittings.
* Proficient or familiar with hand calculation methods for structural analysis.
* Proficiency preferred in NX CAD, but experience is another CAD package is acceptable.

Pay Range: Up to $46/hr DOE

If you are interested in this Liaison Engineer II (2nd Shift) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315100
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/07/2021
Last Updated: 10/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Manufacturing Engineer - Composite Structures

Description:
Manufacturing Engineer - Composite Structures
Mojave, CA
US Persons is a MUST

We are seeking a Composite Structures Manufacturing Engineer with experience in composite aircraft production. The primary task will be to help establish the manufacturing process flow and documentation for the fabrication and assembly of composites structure in an effort to set up production operations for the Production Team. The manufacturing engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the composite fabrication and assembly and work on process improvement and production optimization using lean processes and tools.

Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
Experience with aircraft composites fabrication and assembly required.
FAA approved Airframe and Powerplant license (A&P License) a plus.
Experience with aircraft systems integration, installation, and assembly a plus.
Knowledge of lean manufacturing philosophies and tools.
Excellent verbal and written communication skills.
Excellent interpersonal and coaching skills.
Ability to interact with all levels of the organization.
Excellent organizational skills and problem-solving skills.
Strong team player.
Excellent computer skills, word, excel, MS Project and Powerpoint.
CAD experience (CATIA V5 preferred).
GD&T skills through experience and/or formal training.
Knowledge and experience with AS9100 a plus.
Experience with manufacturing based ERP systems a plus.

The Structures Company LLC is an AA/EOE
 
Job Number: 503
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer - Mechanical Systems

Description:
Manufacturing Engineer, Mechanical Systems
Mojave, CA
US Persons a MUST

We are seeking a first-rate qualified manufacturing engineer with experience in aircraft mechanical system fabrication, assembly and integration. The primary task for this role will be to help establish the manufacturing process flow and documentation for the installation of mechanical systems in an effort to set up production operations for the Production Team. The engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the systems installation and work on process improvement and production optimization using lean processes and tools.

Experience with aircraft mechanical systems integration, installation, assembly, or modification required.
 FAA approved Airframe and Powerplant license (A&P License) a plus.
 Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
 Experience with composite structure and assembly a plus.
 Knowledge of lean manufacturing philosophies and tools.
 Excellent verbal and written communication skills.
 Excellent interpersonal and coaching skills.
 Ability to interact with all levels of the organization.
 Excellent organizational skills and problem-solving skills.
 Strong team player.
 Excellent computer skills, word, excel, MS Project and Powerpoint.
 CAD experience (CATIA V5 and Solidworks preferred).
 GD&T skills through experience and/or formal training.
 Knowledge and experience with AS9100 a plus.
 Experience with manufacturing based ERP systems a plus.

The Structures Company LLC is an AA/EOE
 
Job Number: 502
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestrucurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer - Production Support

Description:
General Summary:
The Manufacturing Engineer position is responsible for the efficient build of a high quality aircraft which includes but not limited to: configuration control, creation of planning, tooling (manufacturing aides), work sequencing and designing efficient build methods. Successful candidate must have a strong mechanical background with sheet metal (Structures), and aircraft production experience.

Duties and Responsibilities:
1. Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
2. Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
3. Develops solutions for production problems relating to materials, manufacturing processes and/or the right tooling.
4. Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between Design Engineering, Tooling department, Quality, and Production.
5. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required
6. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
7. Ensures completed tasks have been performed and inspected in accordance with HACI standards. Identifies and corrects assigned production and manufacturing issues.
8. Prepares and updates planning. Assist with BOM identification and control. Prepares tool orders and verifies compliance.
Education, Experience, Certification and/or Licensure:
1. Bachelors’ degree (Technical) plus 2 years aviation experience
2. Lean, 5S and experience in a manufacturing environment
3. Preferred, Six Sigma Training.
4. Experience with process improvement and cost savings.
5. Preferred, GD&T Training
6. Preferred, Airframe & Powerplant license
7. Preferred, Interiors experience


Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
12. Working knowledge of sheet metal related processes including (but not limited to): Metal Forming, Bending, Laser Cutting, Shearing, Stamping, Stretch Forming, Waterjet Cutting, and Basic Machining Operations

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 509
Job Location: Greensboro, NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer - Tooling

Description:
Sr. Tooling Engineer
Mojave, CA
US Persons a MUST

We are seeking a first rate Sr. Tooling Engineer with experience in tooling design and composite aircraft production. The primary task for this role will be to design Composite layup tooling as well as being the subject matter expert. This engineer will be able to evaluate factors such as tolerance, production rate, cure temperature, program schedule, CTE, and part quantity to determine the best options for tooling.

Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
10+ years of role related experience may be substituted for formal education.
Experience in aircraft composite fabrication and assembly processes.
Knowledge of lean manufacturing philosophies and tools.
Excellent verbal and written communication skills.
Excellent interpersonal and coaching skills.
Ability to interact with all levels of the organization.
Excellent Organizational Skills and problem-solving skills.
Strong team player
Excellent computer skills, word, excel and PowerPoint.
CAD experience (Catia V5 preferred, but any CAD experience acceptable)
Ability to read, interpret and create engineering drawings.
Knowledge and experience with AS9100 a plus.
Experience with manufacturing based ERP systems a plus.
Knowledge of GD&T a plus

The Structures Company LLC is an AA/EOE
 
Job Number: 501
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
  •  Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
  • Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
  • Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
  • Author DRDI/DMT rework instructions to support effective corrective actions.
  •  Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
  • Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
  • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
  • Investigate and assist in preparing justification for equipment and facility requests.
  • Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
  • Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
  •  Perform audit of co-workers output based on defined requirements and procedures.
  • Must demonstrate knowledge of ME policies and procedures.
  • Incorporate Lean Manufacturing Methodology into existing and future processes.
  • With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
  • Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
  •  Support all Safety, Sustainability and Ergonomic Initiatives.
  • Aid in development and maintenance of Business Continuity Plan. 
  • Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
  •  Initiate and maintain accurate daily/weekly activity status based on work output, as required. 



 

Education and Experience Requirements:



  • Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Unique Skills:



  • Previous planning experience with Solumina. 
  • Experience with ship side support.


Other Requirements:



  • Proven knowledge of Lean and/or Six Sigma principles.
  • Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
  • Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
  •  Lean Six Sigma Greenbelt Certification or higher preferred.



 


 
Job Number: 2110141049
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/13/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jCpCQAU&URLSource=cjhunter

Manufacturing Engineer II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
  •  Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
  • Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
  • Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
  • Author DRDI/DMT rework instructions to support effective corrective actions.
  •  Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
  • Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
  • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
  • Investigate and assist in preparing justification for equipment and facility requests.
  • Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
  • Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
  •  Perform audit of co-workers output based on defined requirements and procedures.
  • Must demonstrate knowledge of ME policies and procedures.
  • Incorporate Lean Manufacturing Methodology into existing and future processes.
  • With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
  • Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
  •  Support all Safety, Sustainability and Ergonomic Initiatives.
  • Aid in development and maintenance of Business Continuity Plan. 
  • Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
  •  Initiate and maintain accurate daily/weekly activity status based on work output, as required. 



 

Education and Experience Requirements:



  • Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Unique Skills:



  • Preferred Experience in a Manufacturing or Mechanical Environment.
  • Should have good communication and customer satisfaction skills.
  • Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.


Other Requirements:



  • Proven knowledge of Lean and/or Six Sigma principles.
  • Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
  • Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
  •  Lean Six Sigma Greenbelt Certification or higher preferred.



 


 
Job Number: 2110141047
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/11/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jCp2QAE&URLSource=cjhunter

Manufacturing Engineer II (Weekend Day Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Previous planning experience with Solumina.
- Experience with ship side support.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17042
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/04/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Catia V5, SmarTeam, SAP and Solumina experience required
- G700 manufacturing line support experience preferred
- G700 MBOM / Work Instruction authoring experience preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17013
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous aircraft testing and structures experience a plus.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16648
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/29/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15133
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17043
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/12/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Are you known for your attention to detail and pride yourself in being a responsible professional Manufacturing Engineer? Join our team and take your career to new heights!

Position Purpose:
*Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
*Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
*Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
*Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
*Author DRDI/DMT rework instructions to support effective corrective actions.
*Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
*Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
*Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
*Investigate and assist in preparing justification for equipment and facility requests.
*Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
*Participate in Design for Manufacturing assessments with Engineering.
*Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
*Perform audit of co-workers output based on defined requirements and procedures.
*Must demonstrate knowledge of ME policies and procedures.
*Incorporate Lean Manufacturing Methodology into existing and future processes.
*With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
*Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
*Support all Safety, Sustainability and Ergonomic Initiatives.
*Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
*Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
*Initiate and maintain accurate daily/weekly activity status based on work output, as required.
*Perform other duties as assigned.
*Proven knowledge of Lean and/or Six Sigma principles.
*Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
*Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
*Lean Six Sigma Greenbelt Certification or higher preferred.

Unique Skills:
*Catia V5, SmarTeam,
*SAP and Solumina experience required
*G700 manufacturing line support experience preferred
*G700 MBOM / Work Instruction authoring experience preferred

Education Requirements:
*Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Eighteen months Manufacturing Engineering, planning, or related technical experience.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $48/HR-$55/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Knowledge of CATIA, Solumina Planning, and SAP required.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16696
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/10/2021
Last Updated: 11/08/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous SAP MRP experience preferred
Previous Solumina MES experience preferred
Previous work experience in fast paced manufacturing environment
Knowledge of Lean Manufacturing Principles

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16741
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 10/26/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous SAP MRP experience preferred
Previous Solumina MES experience preferred
Previous work experience in fast paced manufacturing environment
Knowledge of Lean Manufacturing Principles

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16767
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/25/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Unique Skills:
• Preferred Experience in a Manufacturing or Mechanical Environment.
• Should have good communication and customer satisfaction skills.
• Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-618
Job Location: Savannah, GA
Rate: $52.50-$55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/12/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Catia V5, SmarTeam, SAP and Solumina experience required
• Aircraft manufacturing line support experience preferred
• Aircraft MBOM / Work Instruction authoring experience preferred

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.


Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-616
Job Location: Savannah, GA
Rate: $52.50-$55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/08/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
A Manufacturing Engineer III job in Brea, CA is currently available through Belcan. In this role, you will be responsible for using your expertise on a variety of complex manufacturing issues to increase the capabilities to produce products. You will design, improve and install integrated systems in the introduction of new products to the manufacturing and supply chain environment. To be considered for this role, you will have a Bachelor's Degree in Engineering and 5 or more years of relevant experience.

Manufacturing Engineer III Job duties:

* Develop manufacturing methods and processes, tooling statements of work, and equipment specifications for current production and new development programs.
* Perform Design for Manufacturing (DFM), test, cost, and reliability analyses on new products with the design engineering team.
* Evaluate alternative composite materials and processes that improve properties by performing trade studies and coupon testing.
* Perform hands-on work including fabrication of test laminates and prototype parts, coupon testing, analytical chemistry testing, etc.
* Lead Continuous Improvement (CI) initiatives that identify, formulate and implement opportunities using lean manufacturing principles throughout the assembly process to reduce cost, reduce variation, reduce cycle time, improve yields, improve reliability, and improve productivity.

Qualifications:

* Ability to read and interpret 2D engineering drawings with working knowledge of GD&T, and ability to interrogate 3D CAD models.
* Must have a thorough understanding of mechanical engineering concepts, principles, codes and theory.
* Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks.
* Experience with the processing of high temperature composites (e.g. BMI and polyimide).

If you are interested in this Manufacturing Engineer III position in Brea, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316540
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/23/2021
Last Updated: 11/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Masking Prep Technician

Description:
PDS Tech is seeking Masking Prep Technicians for open positions in Opa Locka FL

Primary Responsibilities
  • Prepare parts by masking or stop-off for plating, sandblasting.
  • Wax parts for plating, perform alodine, brush cad, cad strip & passivation
  • Sand blast parts for plating (chrome, nickel, cadmium and nital etch)
  • Load and unload parts in ovens, documenting time and date of each operation

Basic Qualifications:
  • HS Diploma. In the absence of an HS diploma or GED
  • Must be a U.S. Person/Permanent Resident “Green Card” holder

Preferred Qualifications:

  • Basic computer skills

 
Job Number: 2110135485
Job Location: Opa Locka, FL
Duration: 12 months
Input Date: 07/16/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pyp3QAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Inconen is looking for a Mass Properties Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Minimum 5 years of broad Mass Properties experience.
-Mass Properties Special Missions work experience preferred. Experience with using 3D CAD tools, CATIA V5 preferred.
-Strong Excel, PowerPoint and Word skills required.
-Robust understanding of aircraft W&B and operational loading of aircraft.

Education and Experience Requirements:
-Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17017
Job Location: Savannah, GA
Rate: $67.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• Minimum 5 years of broad Mass Properties experience. Mass Properties Special Missions work experience preferred.
• Experience with using 3D CAD tools, CATIA V5 preferred. Strong Excel, Powerpoint and Word skills required.
• Robust understanding of aircraft W&B and operational loading of aircraft.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-617
Job Location: Savannah, GA
Rate: $67-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/15/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Drafting Support #10413

Description:
Mechanical Design Drafting Support Position Responsibilities:
Create and/or refine innovative and practical opto-mechanical and electro-mechanical layouts using Solidworks 3D CAD software.
Develop clean documentation packages and design records which includes maintaining change
records and revision control.
Generate fabrication and assembly drawings, bills of material, and maintain revision control of project documentation.

Mechanical Design Drafting Support Position Required Qualifications:
8+ years of design drafting work experience.
Formal training in design drafting and GD&T highly preferred.
Demonstrated experience in SolidWorks 3D CAD, document management tools and techniques (PDM), and revision control practices.
Ability to assess and apply geometric tolerances in complex and precision hardware assemblies.
Ability to research data that is required to further develop designs using historical precedents,
manufacturer's catalogues, and technical guides. Successfully combines findings with preliminary information to contribute to establishing final designs.
Familiarity with MIL specs and aerospace standards for specifying materials, hardware, and finishes.

Mechanical Design Drafting Support Position Preferred Qualifications:
Design experience packaging and documenting products containing optical elements, structures
and electronics for space and airborne environments.
Experience in hardware design for severe shock, vibration, and thermal environments.
Experience routing cables in 3D CAD assemblies.
Design of bonded assemblies (especially optical mounting) and experience with design for
adhesive applications.
Military and defense related hardware design work.
Hardware design experience for space or vacuum environments especially with selecting materials based on outgassing properties and contamination control.
DTUPC, DFT, DFM methodologies and experience.

Call Kathy Beattie/Technical Recruiter (804) 545-7154
or email kathy.beattie@trimech.com
 
Job Number: 10413
Job Location: Acton, MA
Rate: Open
Per Diem: possible
Overtime: possible
Duration: 12 mos
Start Date: ASAP
Input Date: 09/23/2021
Last Updated: 10/20/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
2+ years of packaging components into a defined space claim and within weight allocation -PTC Creo (Pro-E) or similar CAD software experience -Clear communication, written and verbal -Understanding of and ability to apply GD&T to drawings -Experience performing tolerance analyses -Microsoft office, -2 years minimum experience in related engineering field -Basic knowledge of diesel engines and engine accessories (cooling systems, exhaust, PTO, etc), B.S. degree in Mechanical Engineering (preferred), Aerospace Engineering, or related degree
PREFERRED SKILLS:
Experience with PTC Creo (>2 yrs) creating models and drawings -Experience with testing and root cause analysis -Familiarity with military vehicles -Hands-on experience designing/repairing/maintaining/building mechanical systems -Basic knowledge of powertrain, drivetrain, and suspension systems
REQUIRED EXPERIENCE:
-2 years minimum experience in related engineering field -Basic knowledge of diesel engines and engine accessories (cooling systems, exhaust, PTO, etc)
EDUCATION:
B.S. degree in Mechanical Engineering (preferred), Aerospace Engineering, or related degree
 
Job Number: 60274
Job Location: Houston, TX
Rate: 40
Duration: 12 months
Start Date: ASAP
Input Date: 09/29/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
A Mechanical Designer job in Walpole, MA is currently available through Belcan.  In this role, you will need to have experience with 2D and 3D modeling, drafting and designing using Creo. 
 
Job Responsibilities:
· Capable of 3D and 2D modeling, drafting, designing using CREO. 
· Capable and willing to work in a collaborative team environment
· Must be a strong communicator
· Will be in a dynamic environment, so must be able to switch from one task to other efficiently based on priority and direction
· Able and willing to learn new CAD tools as appropriate

Requirements:
· Five years of experience with designing/drafting in CREO
· Associate's or Bachelor's degree
· Previous Naval Marine or aerospace experience is a plus
· Legal authorization to work in the U.S. is required
· Support will be onsite at our customer's facility in Walpole
· Must be able to pass a drug and background check prior to employment
· Due to the nature of the work being performed, U.S. Citizen only

 
Job Number: 315937
Job Location: Walpole, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/23/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Piping Designer

Description:
Piping Designer with experience in preparation of piping plans/isometrics and field verification of P&IDs. prefer 7-10 years of experience in Piping with a 
minimum of 3 years experience in the industrial market with ability to gather field information for design. Must have a good working knowledge and experience with AutoCAD, Cadworx..

 

 
Job Number: 2110140752
Job Location: Mount Vernon, IN
Duration: 6 months
Input Date: 10/08/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jBlZQAU&URLSource=cjhunter

Principal Engineer Tool Designer ( Palmdale, CA ) 4257-1

Description:
Principal Engineer Tool Designer ( Palmdale, CA ) 4257-1
6 Month Contract

Pay rate: $50-58/hr W2

A successful Principal Engineer Tool Designer (TD) shall be able to design simple to complex tooling, Drill Jigs and Assembly Jigs, Dies, via Catia/NX to support production. This person shall be able to conceptualize these designs in 3D, detail the CAD model and detail the drawings for fabrication. These drawings shall be properly laid out using views and dimensions that are in compliance with ASME Y14.1-5 standards.
The TD, while being the principle contributor and/or leader, shall work with internal/external customers, and colleagues to ensure that the design meets the customer needs and see it through each phase of the engineering process (Design, Fabrication, and Implementation).
In addition, it is essential that this person have the ability to mentor less experienced engineers, work autonomously and in a team environment, adapt to processes and company policy while providing input or methods of process/design innovation.

Duties include, but are not limited to:
• Execution/Lead/Coordination of design and fabrication requirements for tools and fixtures with customers, both internal and external.
• Performing tolerance analysis to ensure form/fit/function.
• Conduct root cause failure investigations and implement associated corrective actions.
• Lead and Assist Product Development Team with new product designs to ensure manufacturability, validate process/technology.

Basic Requirements:
• Direct experience designing in with 3D CAD e.g. CATIA, NX, CREO etc.
• Direct experience in the application/use of GD&T in accordance with ASME 14.5
Preferred Qualifications:
• STEM Degree (Science, Technical, Engineering or Mathematical)
• Composite experience and process knowledge
• Direct Tool design experience of medium to large scale tooling
• Direct Aerospace Tooling experience
 
Job Number: 4257-1
Job Location: Palmdale, CA
Rate: 55
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/28/2021
Firm Name: TALENTPRO CONSULTING
Attention: Angelia Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: Angelia@talentproconsulting.com
Website: www.talentproconsulting.com

Production Supervisor

Description:
An Advisory need for a Production Supervisor job is currently available through Belcan in the domestic U.S. This job is a remote position that will travel and deploy to customers within manufacturing and supply chain environments. As critical project issues and needs for crisis intervention arise, this job will deploy to those customers. This job is a flexible, subcontract 1099 status. Great matching candidates will have strong manufacturing and supply chain leadership and supervisory skills capable of driving measurable solutions and outcomes for clients. In this job, you will be on site at customers and/or customer suppliers working to assess, mitigate, consult, identify, and administer outcomes.

Production Supervisor job duties:
* Deploy and travel to the customer(s) as needed.
* Act as an advisor and consult customer by working as a team member ensuring critical customer needs are met.
* Plans and assigns work, and recommends improvements in production methods, equipment, operating procedures, and working conditions.
* Provides leadership and utilizes independent judgment and action necessary to maintain normal on-going operations.
* Ensures employees perform work safely and that equipment is maintained and processes are carried out in compliance with health, safety and environment policies and procedures.
* Manages departmental performance metrics and provides regular KPI progress reports to Leadership. Supports data activities to deliver proper reports to internal and external customers.
* Ensures work meets quality standards. Addresses any non-conforming materials incidents; follows through on quality concern mitigation.
* Provides cross-functional communication with other department supervisors and managers to insure inventory control, production schedules, and on-time delivery.
* Communicate and interact with shop floor personnel, quality/process teams, customer management team, material teams, purchasing teams and other engineers involved in the process.

Qualifications:
* Proven Leader and Subject Matter Expert (SME) within manufacturing and supply chain production.
* Capable of operating onsite alone to professionally represent Belcan to support multiple parties' interests (Customer/Supplier).
* Operate with speed and precision.
* Ability to travel as needed and deploy rapidly in short notice to begin work due to assessment, supply chain disruptions, and project improvement initiatives.
* Background working with Automotive/Aerospace/Industrial OEMs, suppliers, and/or tooling and machine operations.
* Demonstrated capability to accurately assess deficiencies in manufacturing processes, and possesses the technical know-how to troubleshoot and solve complex manufacturability problems.
* Must have experience in both short and long-term improvement projects, with demonstrated capability to gain consensus and implement manufacturing process improvements.
* Proficient in their understanding and performance drivers of contracted KPIs
* Root cause analysis and lean methodologies to aid in both throughput, quality and capacity related issues.

Desired but not required skills:
* Mechanical aptitude and an understanding of design for manufacturing concepts.
* Hands on experience in the shop/manufacturing environment.
* Understanding of Mechanics of Materials and Structural Design.
* Knowledge of CAD Modeling (2D, 3D).
* Proficiency in MS Office products
* Experience with Cost reduction.

If you are interested in this Production Supervisor job that is remote and travels, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com


 
Job Number: 313998
Job Location: Detroit, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/29/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
City, State: Allegiant
Email: kgesner@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=313998&job_number=313998

Programmer Mill/Lathe Machinist

Description:

Aerospace company in Phoenix, AZ is looking to fill CNC Mill Programming position.
Responsibilities:

  1. Develop new CNC programs based on engineering drawings and models


  • Trouble shoot programs and process improvement
  • Work with engineering to overcome any issues with process or fixtures
  • Edit and convert existing programs for different machines
  • Maintain program database for new and existing programs
  • Choose appropriate tooling from tooling database
  • Work with shop floor for program adjustments and optimization
  • Navigate MRP system

Basic Qualifications:
  • Minimum 5 years offline programming experience on 3, 4 and 5-Axis CNC Mills


  • Must have experience with Master CAM, or similar Cad Cam System and be willing to be

trained to program with Master CAM

  • Must have knowledge of Cutting tools and Standard Machining practices

Must be able to understand GD&T Other experience that includes:

  • Aerospace Machining


  1. Ability to navigate MRP system

Microsoft Office Applications experience (Excel) Preferred Skills:

  • Tooling Design


  1. Fixture Design
  2. Probe Programming

Proper inspection methods in relation to GD&T Physical Requirements (if applicable):

  • Must be able to spend 10 hours a day at a workstation and/or standing
  • All candidates must also have sufficient verbal and written communication skills as well as good problem-solving skills

 
Job Number: 2110136917
Job Location: Phoenix, AZ
Duration: 6 months
Input Date: 08/11/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Joseph Vitetta
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iyEMQAY&URLSource=cjhunter

Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/03/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=312116&job_number=312116

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Project and Component Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Secret Clearance desired but not required**

Duties:
-Position is for a development engineer in support of development of rocket engine combustion devices hardware in missile defense systems.
-Knowledge of pressure-fed hypergolic propellant systems is desirable.
-Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
-Supports combustion devices hardware through the entire product life cycle.
-Analyzes and verifies product design and performance for adequacy and reliability.
-Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
-Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Skills:
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
-Ability to read and interpret blueprints, technical drawings and specifications;
-Ability to communicate clearly and concisely;
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.

Education:
-Bachelors degree in Engineering and two years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 16762
Job Location: Canoga Park, CA
Rate: $40.00 - $60.00/HR (DOE)
Per Diem: Split Possible
Overtime: Possible
Duration: 8 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Propulsion Engineer ( Elkton, MD ) 3636-1, 4008-1

Description:
Propulsion Engineer ( Elkton, MD ) 3636-1, 4008-1
9 Month Contract

Pay rate: $40-50/hr

Responsibilities:
• Support efforts to develop and mature solid rocket motor propulsion system programs and internal research and development activities.
• Support BD with support of new business opportunities via marketing efforts and proposal support.
• Support efforts with creation of preliminary designs in support of new business opportunities and proposals.
• Support propulsion and subsystem IPT leads to ensure technical and cost execution of each system component.
• Check completed layouts and drawings for clarity, completeness, conformity to standards, specifications, and accuracy of dimensioning.
• Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, contractual specification requirements and cost, and make recommendations for improvement.
• Document and present design, manufacturing and testing status as needed.
This requisition may be filled at either as Engineer Propulsion or a Principal Engineer Propulsion Basic

Qualifications Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 2 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 0 years of experience
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Basic Qualifications Principal Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 5 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 3 years of experience or a PhD
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of ANSI Geometric Dimensioning and Tolerancing (GD&T)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Preferred Qualifications:
• Current Active Security Clearance
• Working knowledge of NX
• Additive manufacturing experience
 
Job Number: 4008-1
Job Location: Elkton, MD
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 9 Month
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/28/2021
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Senior Manufacturing Engineer

Description:
A Senior Manufacturing Engineer job is currently available at Belcan in Wichita KS. This is a full time, direct job with full benefits. Great matching candidates will have several years of hands on experience involving machining, shop floor activities, assembly, and tooling, etc.. You will be working in our customer's environment and providing technical expertise in relationship to manufacturing support, troubleshooting, process improvement, insight to quality engineering, and project management.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

Manufacturing Engineer job duties:
* Act as a team member on varying programs and projects, presenting information as needed, and ensuring critical customer needs are met.
* Troubleshoot major material process problems, evaluate scrap out-of-flow material, implement existing or develop new approaches and special projects to solve the issues.
* Troubleshoot, evaluate, make suggestions involving the assembly process, machinery, tooling, gage alternatives, etc.
* FAIRs and LAIRs - review, define, identify, analyze, and resolve all process, forms, drawing characteristics, data, discrepancies, inspections, paperwork, and flow associated with this prior to on-site processing.
* Heavily involved with presenting of the on-site information process, customer procedures, supporting documentation, forms, drawings, production, inspections, quality resolution, etc.
* Identify, act, and complete efforts related to PFMEA's and Effects of Failure and the recommended actions and assignments for preventative and corrective needs.
* Develop and Complete RFT's (Right the First Time), time studies, cycle time, MSA evaluations, etc.
* Write and create new work instructions, update existing work instructions, and make edits for new and existing parts.
* Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and programming, cutting tools, components and parts, unique parts, scrap, etc.
* Communicate and interact with shop floor personnel, quality/process teams, customer management team, material teams, purchasing teams and other engineers involved in the process.
* Mentoring additional team members on customer and industry standards

Manufacturing Engineer Qualifications:
* M.S or B.S. in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Manufacturing Technology, Automotive and Assembly, etc. or equivalent amount of work experience involving manufacturing engineering.
* 10+ years of relevant work experience as a manufacturing engineer.
* Experience and working knowledge of manufacturing process, assembly, and fabrication process.
* Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
* Experience creating and updating technical documents, reports, and standards.
* Excellent oral and written communication skills.
* Extensive understanding of product engineering concepts and applications.
* Ability to be a self-starter with potential for technical leadership and guidance.
* Strong analytical reasoning and problem-solving skills.
* Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.
* Legal authorization to work in the US required
* Active Security Clearance is preferred

Desired but not required skills:
* Mechanical aptitude and an understanding of design for manufacturing concepts.
* Hands on experience in the shop/manufacturing environment
* Thorough understanding for air frame manufacturing
* Understanding of Mechanics of Materials and Structural Design.
* Knowledge of CAD Modeling (2D, 3D).
* Proficiency in MS Office products
* Experience with Cost reduction.
* Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this Senior Manufacturing Engineering job in Wichita KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 314810
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
City, State: Belcan - Recruiting
Email: kfabing@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=314810&job_number=314810

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designer #10387

Description:
Sr. Mechanical Designer Description:
Our client located in the greater Boston, MA area, needs a Sr. Mechanical Designer to provide design and drafting support to development, detailed design, build and test of innovative sensor products that operate in extreme environments. The successful candidate will have a proven track record in generating creative concepts, supporting iterative trade studies, and meeting program budget and schedule objectives.
*This position is a 6-9 + months contractor opportunity*
Sr. Mechanical Designer Responsibilities:
• Create innovative and practical opto-mechanical and electro-mechanical designs and documentation packages.
• Work closely with members of the program team to achieve hardware design, build and test objectives.
• Track, understand and flow down design and schedule requirements and apply sound design principles and oversight to meet project requirements.
• Develop clean documentation packages and design records which includes maintaining revision control.
Sr. Mechanical Designer required Experience:
• Bachelor’s degree in mechanical engineering preferred, not required
• 8+ years designing electronics packaging with Solidworks, PDM, and GD&T
• Design experience packaging and documenting products containing optical elements, electronics and structures for space and airborne environments.
• High proficiency in SolidWorks 3D CAD, data management tools and techniques, and revision control practices.
• Ability to assess and apply geometric tolerances in complex and precision hardware assemblies.
• Ability to research data that is required to develop designs using historical precedents, manufacturer's catalogues, and technical guides. Successfully combines findings with preliminary information to contribute to developing final designs.
• Good communication and organizational skills. Sound interpersonal skills that enable interfacing, coordinating, and negotiating with company personnel, customers and suppliers.
• High creativity and ability to achieve lean, efficient, low cost, easy to assemble design solutions.
• Experience in hardware design for severe shock, vibration and thermal environments preferred, not required.

Call Kathy Beattie/Technical Recruiter (804) 545-7154
or email kathy.beattie@trimech.com
 
Job Number: 10387
Job Location: Acton, MA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6-9 mos.+
Start Date: ASAP
Input Date: 10/22/2021
Last Updated: 11/04/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Senior Test Engineer - Airframe - MUST BE US Persons

Description:
We are seeking an experienced Senior Test Engineer to support Structural Testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on aerospace structural testing or equivalent laboratory test engineering experience.
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with MTS or equivalent Controls and Data Programs.
• Results oriented, focused on safety, reliability and deliverables to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and Problem-solving Skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience Required. Bachelor’s degree in Aerospace or Mechanical Engineering from an accredited institution, with a concentration in Design, Structures, Testing or Materials.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 08/13/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Senior Test Engineer - Systems - MUST BE US Persons

Description:
We are seeking an experienced Senior level test engineer to support structures, systems and avionics testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• Fixture Design and Analysis
• Vibration fixture modal analysis
• Control, instrumentation, and data acquisition for variety of environmental tests of avionics and mech systems
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Ability to perform at a high level with minimal direction.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience. Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 08/13/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Signal Integrity Engineer

Description:

The Signal Integrity Engineer will play a critical role in the planning of digital PCB designs, simulation, lab verification, and troubleshooting signal integrity issues on completed designs. They will also be expected to help with design review of critical PCBs for signal integrity concerns. Good communications skills and ability to work with physically dispersed teams is a strong requirement.

Skills Experience Requirements: 



  • 8+ years’ experience with High-Speed Signal Delivery Design and Evaluation. This includes both signal integrity within a PCB and off the board (board to board connectors, ribbon cables, coaxial cable, etc.).
  • Recent experience with Cadence Sigrity design suit or Ansys SIwave for SI simulations is required.
  • Expertise in DDRx memory bus designs preferably using Mentor HyperLynx or Cadence Sigrity SI suit is required.
  • Expertise in the design of serial links including multilevel signaling (PAM4), COM, jitter analysis and SERDES equalization techniques with CTLE, DFE and FFE is required.
  • Expertise in channel model construction of serial links cascading s-parameter data of PCB, connector, and cable to generate a complete system model for an end-to-end simulation.
  • At the minimum working level knowledge with Cadence Allegro design layout tool, its constraint manager and schematics is required.
  • A high-level knowledge about behavioral device modeling including IBIS and IBIS-AMI models as well as passive device modeling techniques with touchstone files is required.
  • A high-level knowledge about SI and PCB design fundamentals including single ended and differential signals, signal loss, impedance control and crosstalk noise is required.
  • Experience in the simulation of parallel interfaces including FPGAs, SDRAMs, Flash memory devices is required.
  • Experience with Keysight ADS and ANSYS HFSS is a highly desirable asset.
  • A good grasp of fundamentals circuit and electromagnetics theory including frequency and time domain analysis techniques, transmission line theory, termination techniques, generating and interpreting data-eye diagrams, bathtub curves with NRZ and PAM4 signaling techniques is required.
  • A working knowledge of PCB stackup design with fabrication limitations and cost trade-offs
  • along with some experience of high frequency PCB material are required.
  • Significant SI lab experience with TDR and VNA measurements is a must.
  • The candidate should be able to develop test fixtures for SI measurements (both custom design test boards as well as adhoc probing solutions to troubleshoot existing PCBs) 
  • Familiarity with the cost vs performance tradeoffs when designing signal interfaces is an asset. 
  • Experience with high-speed flex circuit design is a desirable asset.


Typical Education:    

  • Bachelor’s degree in Electrical Engineering with emphasis in wireless communications



Travel:
Occasional overnight travel is required



 
Job Number: 2110137114
Job Location: Richardson, TX
Duration: 12 months
Input Date: 08/16/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iymVQAQ&URLSource=cjhunter

Software Engineer

Description:
PDS Tech Inc. is seeking an Software Engineer in Wichita, KS.

Description :
  • Conducts multidisciplinary research and collaborates with domain experts in the planning, design, development, and utilization of engineering application software and systems.
  • Designs, develops, documents, tests, maintains, and supports application software and systems.
  • Captures knowledge of engineering design, analysis, and manufacturing processes in computing systems to automate best practices, reduce cost and cycle time, and improve quality.
  • Develops and maintains computer systems used in the application of computer-aided design, computer aided manufacturing and computer-aided engineering (CAD/CAM/CAE) methods for engineering design and analysis, manufacturing engineering, fabrication, assembly and inspection.
  • Complies with organization software methodology, company standards and regulatory requirements.
  • Performs system and subsystem integration, technical risk assessments, technical planning, verification and validation, and supportability and effectiveness analyses of total systems throughout the system lifecycle.

Requirements:
  • Teamcenter experience - 5+ years of experience a MUST
  • Currently have or be able to obtain Security Clearance (DOD)
  • 3-5 + years of professional experience within aerospace or similar manufacturing environment preferred
  • PLM Software Development experience in Siemens Teamcenter and other software systems  
  • Experience with SAP and Dassault Enovia GPLM+
  • Strong communication skills, both oral and written
  • Program Management experience
  • Understanding program milestones and the impact to the projects, and how schedules will impact program milestones
  • Cross-functional coordination/communication to achieve project goals
  • Strong Microsoft Office experience; above-average Excel skills

Candidates must hold Security Clearance - Secret or Above.

  • Last investigation must have completed no earlier than August 2016.
  • 10+ years of experience

 
Job Number: 2110134379
Job Location: Wichita, KS
Duration: 12 months
Input Date: 07/07/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PvQQQA0&URLSource=cjhunter

Sr CREO Designer with 9 years of CREO (San Jose, CA)

Description:
***Minimum 9 years of design/drafting experience using Pro-E/Creo***
======
Sr. Designer to create innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
===============================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
 
Job Number: PL CREO CA
Job Location: San Jose, CA
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 10/06/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Sr Designer-NX 19 -***Recent UG NX 19 experience mandatory!!***

Description:
Sr. Designer to support program initiatives. ***Current UG NX 19 experience required***MUST See this in the RESUME!*** Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design. Current UG NX 19 experience required.

Current UG NX 19 experience required. Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.

Minimum 9 years of design/drafting experience using UG NX CAD system. Recent UG NX 19 experience mandatory. Associate Degree with emphasis in engineering drafting/design or an equivalent combination of training and experience; plus a minimum of nine additional years drafting and design experience, including five years of advanced design concepts and applications.

***This CONTRACT that does NOT include any paid holidays, paid vacation or sick days***
=========================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
I need the last 4 of your social security # as well as your hourly pay rate in order to get you submitted! Referrals appreciated!
 
Job Number: NX - PL
Job Location: York, PA
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 09/17/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
A Sr. Manufacturing Engineer job in Brea, CA is currently available through Belcan. In this role, you will be responsible for using your expertise on a variety of complex manufacturing issues to increase the capabilities to produce products. You will design, improve and install integrated systems in the introduction of new products to the manufacturing and supply chain environment. To be considered for this role, you will have a Bachelors Degree in Engineering and 5 or more years of relevant experience.

Sr. Manufacturing Engineer Job duties:

* Develop manufacturing methods and processes, tooling statements of work, and equipment specifications for current production and new development programs.
* Perform Design for Manufacturing (DFM), test, cost, and reliability analyses on new products with the design engineering team.
* Evaluate alternative composite materials and processes that improve properties by performing trade studies and coupon testing.
* Perform hands-on work including fabrication of test laminates and prototype parts, coupon testing, analytical chemistry testing, etc.
* Lead Continuous Improvement (CI) initiatives that identify, formulate and implement opportunities using lean manufacturing principles throughout the assembly process to reduce cost, reduce variation, reduce cycle time, improve yields, improve reliability, and improve productivity.

Qualifications:

* Ability to read and interpret 2D engineering drawings with working knowledge of GD&T, and ability to interrogate 3D CAD models.
* Must have a thorough understanding of mechanical engineering concepts, principles, codes and theory.
* Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks.
* Experience with the processing of high temperature composites (e.g. BMI and polyimide).

If you are interested in this Sr. Manufacturing Engineer position in Brea, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316747
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/30/2021
Last Updated: 11/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Sr. Metrologist

Description:
A Sr. Metrologist job in Brea, CA is currently available through Belcan. In this role, you will be responsible for providing expert knowledge in metrology solutions including but not limited to: laser tracker/PCMM inspections, machine alignments, reverse engineering, tool building and assembly, software and hardware training. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 8 years of relevant experience.

Sr. Metrologist Job duties:

* Generate inspection reports to customer specifications. This includes Drawing Based inspection reports, First Article Inspection Reports, Model Based Definition inspection reports, and Dimensional inspection reports.
* Maintain equipment by performing field calibrations and verifying manufacturers maximum performance errors.
* Maintain equipment's cleanliness using manufacturers specifications.
* Assists in recommending solutions for customers applications.
* Generating daily logs to be used for reference if asked by the customer.

Qualifications:

* Expert level experience using Laser Trackers (Leica, Faro and API), PCMM's (Romer and Faro arms), 3D Laser scanners and Total Stations.
* Expert level knowledge of Computer Aided Measuring software (Verisurf, Polyworks, Spatial Analyzer, Buildit etc.).
* Expert level knowledge in blueprint reading and GD&T.
* Solid knowledge of 3D CAD.
* Knowledge in aerospace tooling, composites manufacturing and assembly.

If you are interested in this Sr. Metrologist position in Brea, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316035
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/09/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=316035&job_number=316035

Structural Analysis Engineer 4

Description:
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.

Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA


Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies




The Structures Company LLC is an AA/EOE.
 
Job Number: 525
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 11/01/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Structural Design Engineer

Description:
Structural Design Engineer:  Who You Are

Seeking a design engineer with experience developing aircraft modifications or in-service sustainment activities. This role executes work under the supervision of the Design Lead or Manager. Engineers in this position are expected to have strong experience with aerospace standard design practices and methods as well as engineering experience in design and analysis required to develop efficient solutions. 

Structural Design Engineer:  Your Mission

Development of conceptual designs through manufacturing of details, assemblies and installations.
Support operations team to ensure vehicle readiness for flight.  This includes onsite support during implementation of solutions. 
Generate Engineering definition in accordance with the industry and company standards.
Support review of manufacturing plans and procedures to ensure compliance with design requirements.
Manage time effectively to meet the demands of internal customer requirements.
Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.
Structural Design Engineer: What You Bring

Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
4-8+ years of experience in aerospace industry with a strong design emphasis.
In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches.  CATIA V5 preferred.
Experience in aircraft sustainment programs or material review board desired.
Experience with composite tooling, fabrication, and manufacturing methods.
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
Excellent verbal and written communication skills.
Strong team player and ability to work independently with excellent organizational and problem-solving skills.


ITAR Requirements


To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Number: JPC - 1222
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6 Months +
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: garrett.smart@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Prepare drawings, Engineering Orders (EO), and specifications in a standardized format for use by Manufacturing in reproducing a product which will be in conformance to approved Federal Aviation Administration (FAA) type data, adhering to Records and Release procedures.

ESSENTIAL JOB FUNCTIONS:

• Model conceptual layouts and proposed design changes in Unigraphics NX (CAD)
• Modify existing drawings, both CAD and manual, to correct errors and implement new designs
• Create new CAD drawings using Unigraphics NX
• Construct and manage design packages using Teamcenter
• Use best practices to design detail parts and assemblies (mostly sheet metal) that are low cost and easy to install or service
• Determine appropriate standard hardware, utilizing stocked items when able or sourcing specialty hardware as required
• Coordinate with other departments (Systems, avionics/electrical, etc) to meet program milestones and release drawings according to the project schedule
• Work on projects that span multiple areas of focus including wing, fuselage, empennage, interiors, seats, landing gear, placards, etc
• Support manufacturing and experimental hangar as required during build and testing of product improvements
• Research existing parts and structure in areas that may not have CAD models
• Facilitate design review sessions for cross-functional coordination
• Some project management required including project scope creation and recommendations, progress tracking, and completion estimations
• Perform other related duties as required

SUPERVISORY RESPONSIBILITIES:

This job has no supervisory responsibilities. May be required to train and assist other employees.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION AND EXPERIENCE:

Bachelor degree in engineering or technology, (preferably mechanical or aerospace), and minimum five years general aviation related experience in airframe, mechanical drafting, or design.

General knowledge of all phases of aircraft design, testing, approval, manufacturing, inspection and service; materials and material strengths, all manufacturing processes and techniques relative to fabrication and assembly; working knowledge of Unigraphics CAD; and familiarity with FAR 23 and certification are required to perform the duties of this position.

LANGUAGE SKILLS:

The employee must possess the ability to communicate effectively with all internal and external customers in both written and oral form. Excellent communication and interpersonal skills are essential to deal with personnel situations.

Considerable management skills are required to successfully perform the planning, directing, reporting and administrative responsibilities of this position.


WORK ENVIRONMENT:

The work environment characteristics described here are representative of those the employee encounters while performing the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee frequently works in an office environment; and is occasionally exposed to manufacturing environment and elements such as odor, noise, dust, heat, cold, chemicals, or some element present which makes conditions less desirable than usually found in an office.

Travel and overtime are required when necessary.

SAFETY AND POLICY PRACTICES:

The employee in this job must be knowledgeable in regard to the safety policies and procedures of the Company as described in the Company safety manual. The employee must adhere to all said policies and procedures while supporting the goals and objectives of the organization and recognize the Company’s need to achieve its business objective. Employee is responsible for complying with Company hazardous waste disposal procedures.
 
Job Number: 03-003
Job Location: Vero Beach, FL
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/12/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Palmdale, CA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315082
Job Location: Palmdale, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
City, State: Belcan - Recruiting
Email: wford@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=315082&job_number=315082

Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Fort Worth, TX. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315081
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
City, State: Belcan - Recruiting
Email: wford@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=315081&job_number=315081

Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Marietta, GA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315083
Job Location: Marietta, GA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
City, State: Belcan - Recruiting
Email: wford@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=315083&job_number=315083

Tool Designer, Palmdale CA - CONTRACT

Description:
• Execution/Lead/Coordination of design and fabrication requirements for tools and fixtures with customers, both internal and external.
• Performing tolerance analysis to ensure form/fit/function.
• Conduct root cause failure investigations and implement associated corrective actions.
• Lead and Assist Product Development Team with new product designs to ensure manufacturability, validate process/technology.

Direct experience designing in with 3D CAD e.g. CATIA, NX, CREO etc.
• Direct experience in the application/use of GD&T in accordance with ASME 14.5

Preferred
• STEM Degree (Science, Technical, Engineering or Mathematical)
• Composite experience and process knowledge
• Direct Tool design experience of medium to large scale tooling
• Direct Aerospace Tooling experience
 
Job Number: CA96742
Job Location: Palmdale, CA
Input Date: 10/01/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Tool Designer/ Engineer- Multiple Locations, SC, WA

Description:
Tool Engineer 3

Location: North Charleston, SC
Duration: 12+ Months

Description:
Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Basic Qualifications (Required):
Degree and typical experience in engineering classification: Bachelor’s and 5 or more years’ experience, Master’s degree with 3 or more years’ experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Assembly Process
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.

Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Additional Job Description:
Computer literate
Must be able to read and write training material/job material

Skill Code: 66U-Designer Engineer
 
Job Location: North Charleston, SC
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 11/18/2021
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 1

Description:
Seeking a Wire Design & Install Engineer to join the Electrical Design Team to create electrical designs in support of various projects and programs.
-Develops and maintains cable/wire harness detail and assembly designs
-Supports analysis and design reviews
-Develops and maintains electrical product detail, assembly and
installation designs (e.g., equipment racks, power panels, cable
routing and geometry, antennas)
-Bachelors of Science degree or higher
-College coursework and/or work experience with computer aided design
tools and systems (e.g., computer aided design / computer aided
manufacturing (CAD / CAM) software)
-MS Office Suite (i.e. Word, Excel, PowerPoint) experience

Preferred Qualifications (Desired Skills / Experience):
Mentor Graphics Capital (MGC) or Enovia experience
CATIA V5 experience
Experience in wire harness design, wire harness installation or equipment installation
College coursework and/or work experience with Boeing design, production, and build processes is a PLUS
Communicator, working in teams
 
Job Number: 21-25483
Job Location: Ridley Park, PA
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 10/9/2021
Input Date: 09/28/2021
Last Updated: 10/18/2021
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Wire Design and Electrical/Electronic Installation Design

Description:
Job Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

Position Responsibilities:
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision

Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o College coursework and/or work experience with computer aided design tools and systems (e.g., computer aided design / computer aided manufacturing (CAD / CAM) software)
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o CATIA V5 experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with design, production, and build processes is a PLUS
o Communicator, working in teams

Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically < 2 years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46540-1
Job Location: Ridley Park, PA
Rate: $46/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/01/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: jorge.garcia@thestructurescompany.com
Website: www.thestructurescompany.com

Back to Advanced Job Search