Job Search Results

537 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 05:44AM Pacific Time by ContractJobHunter. )

Listings 1 - 537

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2531 - CABIN SYSTEMS ENGINEER - cv, word only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Working experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Strong knowledge of Commercial Aircraft interior cabin systems including in-flight entertainment system and connectivity network.
 
Job Number: 2531
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

•​Review and support Avionics Certification Activities.

•Create and review Certification Plans.

•Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.

•Review qualification by similarity and/or analysis reports.

•Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).

•Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.

•Perform Component Drawing Reviews.

•Complete aircraft assembly and installation drawing reviews.

•Participate in System Design Reviews.

•Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.

•Coordinate with certification authorities to seek clarification on requirements.

•Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.

•Create, review and approve interface control documents and any sub level writing interface documents.

•Support Avionics Flight Testing Activities, including but not limited to:

•Discuss, write and review test plans and preparation activities with flight test team.

•Help prepare and review pre and post flight briefing.

•Monitor live flight data, typically via telemetry, during flight test on aircraft.

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety pf flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate limitations documentation.

•Complete special projects and tasks assigned by Group Lead.






Requirements

Knowledge/Skills/Abilities

•Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).

•Good leadership presence as well as people management skills:

•Future-oriented in thinking and operation.

•Able to lead by example and live/work by company values.

•Ability to successfully contribute to a positive and productive work environment.

•Able to in still a sense of urgency in team members.

•Able to be patient and objective in difficult situations with different types of people.

•Strong customer service tool box:

•Professional mannerisms, appearance and actions (self-confident and committed to high ethics).

•Strong follow-through, quick thinking and resourceful.

•Ability to remain calm, cool and collected in stressful situations.

•Strong sense of urgency to resolve customer needs.

•Strong organizational, time management and prioritization skills:

•Able to multi-task, maintain focus on several different projects at one time and hit deadlines.

•Able to be flexible with attention and priority.

•Ability to work in a progressive, fast-paced environment (work well under pressure).

•Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.

•Strong communication skills (oral, written, presentation) with both external and internal customers.

•Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

•Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.

•Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.

•Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.

•Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.

•Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.

•Proven track record of improving the efficiency of assigned processes or procedures.


Education

•Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).

•Other Engineering fields may be considered.


Experience

•Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural / Stress Engineer

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear, propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover Composite and Conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:
•Static Structural Analysis and Margin of Safety Determination,
•Fatigue and Fracture Mechanics Analysis of Critical Interfaces,
•Determination of Airframe component replacement and / or retirement times,
•Specification and Design of Airframe related Static and Fatigue tests,
•Field Support and
•Formal Engineering Documentation.

Education requirement:
BS in Mechanical Engineering, Aerospace Engineering or Chemical Engineering (MS or ME preferred)

Work Experience Required:
•Minimum of 10 years of experience in the functions described above.
•Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
•Excellent oral and written communication skills are required.
Software Experience: •NASTRAN/PATRAN or equivalent FEM,
•CATIA,
•MS Office applications.

Secret Clearance preferred but not required.
 
Job Number: 1910096548
Job Location: Stratford, CT
Per Diem: split
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Design Engineer

Description:
This position is responsible for Design, modification and integration of custom avionics and electrical packages for new rotorcraft aircraft. We are seeking a minimum of 6 years of previous experience in an Engineering role in Aviation or Aerospace manufacturing environment. Must be proficient in MS Office and AutoCAD.
Education: Required: Bachelor's degree in Electrical/Aeronautical from an accredited college/university
Preferred: Master's Degree from an accredited college/university in engineering
This position requires a US Person as defined by ITAR regulations.
 
Job Number: 943114
Job Location: Grand Prairie, TX
Rate: $ 65.-75./ hrly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Design Engineer

Description:
This position is responsible for Design, modification and integration of custom avionics and electrical packages for new rotary aircraft. We are seeking a minimum of 6 years of previous experience in an Engineering role in Aviation or Aerospace manufacturing environment. Must be proficient in MS Office and AutoCAD.
Education: Required: Bachelor's degree in Electrical/Aeronautical from an accredited college/university
Preferred: Master's Degree from an accredited college/university in engineering.
This position requires a US Person as defined by ITAR regulations.
 
Job Number: 943127
Job Location: Columbus, MS
Rate: $ 65.-75./ hrly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Avionics Engineer
Avionics Interpret electrical and avionics requirements and generate detailed task descriptions for the team
Significant leadership and equipment qualification experience
Experience with equipment design, integration, relevant testing both on and off aircraft
Excellent organizational and prioritization skills
14 CFR Part 27 and 29 certification experience (ELAs, developing test plans and reports, system safety analysis, lead testing activities)
Leadership and mentoring skills – develop engineering staff in house
Design and integrate the following systems: communication Systems (like Becker, Eagle, etc), navigation systems (transponders, TCAS, mapping systems), TDFMs, 12 v and 110 electrical systems into an aircraft
Take designs and create Wiring Diagrams and Harness drawings
Have experience with 14 CFR Part 27 and 29
Have experience with writing test plans and performing tests(EMI/EMC, Flight testing, etc)
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic System Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.

Duties and Responsibilities:
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• DO-160F/G, DO-178B and DO-254 experience required.
• Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 10 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in requirements management tools such as DOORS
• Experience with PLM Tools such as TeamCenter and SAP

The Structures Company is an AA/EOE.
 
Job Number: 253
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Responsible for defining and overseeing implementation of certification engineering requirements for United Rotorcraft, Federal Aviation Administration (FAA)/Organization Designation Authorization (ODA) and engineering activities. Responsible to derive, define, and apply design requirements from the regulations for implementation by technical staff. Prepare and completion of Compliance Checklists, Certification plans, Conformity Inspection Plans, and compliance summaries for assigned Supplemental Type Certificate (STC) projects. Work effectively in a multi-disciplined environment of structures, mechanical/electrical systems, and avionics commonly found in aircraft certified under 14 Code of Federal Regulations (CFR) part 25 and 27, and in US Military aircraft. Significantly impacts the company’s ability to consistently meet regulatory, commercial, and technical obligations utilizing strong problem solving skills.

• Review previously produced certification documents, drawings, technical data, and test data as benchmarks for preparation for preparation of future documents.

• As a member of the design team (project engineer, functional lead, and certification engineer), coordinate and finalize the preparation of certification documentation per project compliance check list. This includes, but is not limited to, Structural/Mechanical/ Electrical/Avionics Compliance documents, Standard Parts Lists, Commercial Parts Lists, Test Plans, Test Reports, ICA’s, RFMS’s, etc. Participate in preparation/revision of configuration control drawings, listings and indexes, and flammability requirements as required.
• Bachelor’s degree (BS/BA) in Aeronautical, Mechanical or Electrical from four-year college or university, or five to eight years’ experience in an authorized repair station working directly with records required to alter, repair, maintain and return-to-service 14 CFR part 25, part 27, and/or part 27 aircraft.
• 5-8 years analysis, design and development experience in aviation field or equivalent and related military experience preferred.
• 3-5 years’ experience performing tasks consistent with Certification Engineer 2 or equivalent experience preferred.
• Advanced knowledge and understanding of the FAA certification process, with familiarity and experience with 14 CFR and Department of Defense (DOD) regulatory requirements preferred
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5 (Electrical Systems Design)

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-20554
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (Everett & Seattle)

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5 preferred
2) Gulfstream Completions electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10108
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - 1 Contract Position - 1 Direct Position

Description:
Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre‐defined designs
Use prescribed methods to develop solutions which impact functions or products within the Engineering Department
Use design initiative to develop solutions which impact specific areas of functions outside of the Engineering Department


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Specific experience with Garman G1000 avionic system
Familiarity with FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred


Authority and Responsibility
Successful with little to no supervision



Design Engineer III
Design Engineer: Design engineers design the parts, assemblies, and installations which ultimately become products. Core competencies for design engineering are: aeronautical, electrical, and mechanical. At a minimum, Design Engineers should hold a Bachelor of Science in an applicable engineering field.

Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre-defined designs which have minimal impact to Federal Aviation Regulations (FAR) compliance
Use prescribed methods to develop solutions which impact specific areas of FAR compliance
Use design initiative to develop solutions which impact specific areas of FAR compliance and which require cross-functional coordination.


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Familiarity with FAR Part 23; thorough knowledge of specific areas of FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred.

The Structures Company is an AA/EOE.
 
Job Number: 255
Job Location: ID
Rate: $70-$85/HR - $100-$120K - **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 4

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
•AutoCAD required, Catia V5and CHS preferred
•Experience with power distribution, lighting, switching, sizing and routing.
•Familiarity in mechanical system design
•Familiarity with aircraft STC procedures preferred. 9GV,GVI, and GVII electrical system design experience preferred.
•14 CFR 25 Subpart H - EWIS experience preferred
•Part 25 Certification Experience for Cabin Interiors preferred
•Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
•Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
•Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
•Is consulted extensively by associates and others as a recognized authority within the field
•Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
•Approach to problem solving balances technical product, cost and schedule
•Works without appreciable direction; work is reviewed from a long-range perspective for desired results
•Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 5

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-311
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must Be Eligible for a Clearance

Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles

Experience with network-based vehicle (combat or automotive) architectures

Experience trouble shooting Vetronics systems required

Experience with link-based (e.g., CAN) diagnostic systems required

- Experience with J1939 CAN protocol

- Experience with SIL and vehicle-based Vetronics testing

- Familiarity with TCP/IP and UDP protocol
 
Job Number: 45414
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Our client is looking for an Electrical Engineer in Slidell, Louisiana! Apply today if you have the skills!

The ideal candidate for this position will perform the following tasks:
* Under general supervision and technical guidance, performs engineering work requiring the independent evaluation, selection and application of standard techniques, conventional procedures and criteria as contained in available Engineering reports, specifications, manuals and handbooks.
* Performs theoretical analysis and mathematical calculations, as the basis for practical application.
* Formulates and writes reports, specifications and procedures required of the assignment.
* Develops details of assignments by making minor adaptations and modifications to current state of the art techniques, based on basic engineering theory and ingenuity.
* Works with breadboards or models.
* Coordinates work of draftsman or technicians assigned to the project.
* Receive and act on instructions as to the general approach, specific assignment objectives, points of emphasis, anticipated difficulties and possible solutions.
* Create Engineering model and drawing using SolidWorks and AutoCAD
* Performs other job-related duties as assigned by management.

Mandatory Qualifications and Experience:
* Bachelor of Science Degree in Electrical Engineering
* 3 plus years of experience of practical engineering experience.
* Must be knowledgeable in 3 or more of the following areas:
- Electrical/Electronics component and system integration and analysis
- Electrical power distribution system design and electrical load analysis
- Electrical circuit design and analysis
- Electromotive components system design and integration
- Electro-mechanical and servo control mechanism design and integration.
- Electrical/Electronic instrumentation and data acquisition.
- Experience in electrical engineering skills in a lab environment

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129221
Job Location: New Orleans, LA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ability to obtain a security clearance

FPGA firmware design, digital circuit design, and board design Having utilized the Xilinx Vivado, Plan Ahead and/or Altera Questra development platforms to successfully build and test an executable hardware implementation of code which they have written. Experience with MatLab, Labview, C, C++ programming languages.
 
Job Location: NY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES:
The Electrical Engineer will be involved with full life-cycle product development with a focus on digital and firmware design. Primary tasking will include: Focus on Firmware design, Product requirements, Box level integration, System integration, System test, Detail design process. Support tasking will include: Creation and maintenance of wiring diagrams and cable assemblies, Liaison support to onsite and remote manufacturing, Product installation, Schematic capture, Circuit board design, etc. Sets the highest ethical standards for self and others. Other engineering duties as assigned.

REQUIRED EXPERIENCE:
• With BS in Electrical Engineering or related field, must have at least seven (7) years of relevant experience.
• Relevant experience includes: FPGA design experience, VHDL or Verilog proficiency, HDL simulation tools, Tcl scripting familiarity, Strong troubleshooting mentality, Team-oriented and task-focused, Software or firmware design principles, Operate spectrum analyzers and oscilloscope.
• Preferred Experience includes: Xilinx Vivado experience, Analog and digital hardware design experience, Embedded software integration experience, Source code repository (Git, Subversion, etc.), Source code peer review processes, Bug tracking tool suites, Automated build environments, Strong electrical engineering fundamentals, AutoCAD
• Must be able to work weekends and overtime as required.
• The essential physical requirements of the position will be reviewed with the applicant during the interview.

EDUCATION:
Accredited BS in Electrical Engineering or related field

WORK HOURS:
Day Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 175665
Job Location: Waco, TX
Rate: $45.00 - $55.00/HR
Per Diem: Possible
Overtime: yes
Duration: 6 months
Start Date: Now
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Position : Electrical Engineer
Location: Santa Barbara, CA
Duration: 1 year
Client : Biggest Aerospace

Description:
Analog and digital electronics, PCB, Verilog, FPGA Design Engineer. Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

Skill/Experience/Education:
Electronic Circuit Design Engineer. Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required. Excellent communication skills. Requirements flow down preparing and presenting design reviews.

Desired:
Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design. Test engineering experience - hands on with laboratory test equipment. Integrated circuit design. MATLAB, C++, and other programming. Proficient with electronic design and simulation tools.

Please share resumes at rchaudhary@iconma.com or call (804)915-9602
 
Job Number: 18-20721
Job Location: Santa Barbara, CA
Rate: Open
Per Diem: YES
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems.  They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.





Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.






Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience 




Aircraft electrical design experience
Experience with Catia
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Independence, Missouri ) 8842840

Description:
Electrical Engineer ( Independence, Missouri ) 8842840
6 Months Contract

Pay rate: $45-50/hr maybe more for the right candidate.


5-10 years of Controls Experience
Machine Design familiarity/experience


**ROLE AND RESPONSIBILITIES**
- Development of product designs for new and existing equipment.
•Develop Bill of Materials for applications.
•Develop documentation and schematics as required for timely completion of projects.
•Review drawings of other Electrical Engineers and Electrical Designers.
•Create product functional specifications, equipment manuals and training manuals.
•Design/engineer pneumatic systems to meet application requirements.
•Work with Sales, engineers, and potential customers to determine optimal solutions for automating their applications.
•Prepare equipment line integration proposals and sales quotation data.
•Create/develop improvement ideas to make engineering team and company more efficient.
•Develop and modify Rockwell PLC and HMI programs.
•Learn and implement new pieces of electrical equipment in PHC design.
*PREFERRED SKILLS*
•Experience with:
o AC & DC motor drives
o Rockwell Software
o Allen Bradley components
o PLC Programming
 
Job Number: 8842840
Job Location: Independence, MO
Rate: open
Per Diem: split
Overtime: poss
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
Cabin Management systems, in-flight entertainment. Military avionics experience may be considered. AutoCAD
 
Job Number: 18-12794
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / wiring harness - Clearance CA

Description:
1302-1 Electrical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/30/2019
End Date: 9/27/2019

Job Description:
Designs and tests Electrical system, components, equipment, and networks for Military air vehicle. The applicant must have extensive experience in Wiring Harness Design, Build, and Test. Considered a Subject Matter Expert (SME) in the area of Harness Design and Build. Experience with System Integration of Hardware in a simulation test environment is desired. Able to evaluate electrical wiring and harness assembly diagram for build and integration. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents, Termination Aids (TAs) and Wire Harness Master (WHM) sketches. Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.


Candidate will work first shift

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $70.00 Hourly
 
Job Number: JE-1302-1S5
Job Location: Palmdale, CA
Rate: 70/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Controls Design

Description:
Electrical Engineer - Controls Design
CLEARANCE REQUIRED
5-10 years of Controls Experience
Machine Design familiarity/experience
Energetics knowledge/experience// Please do NOT submit resumes with less than 2 years of Controls experience. Also, avoid submitting power grid system specific resumes.//
**ROLE AND RESPONSIBILITIES**
• Development of product designs for new and existing equipment.
• Develop Bill of Materials for applications.
• Develop documentation and schematics as required for timely completion of projects.
• Review drawings of other Electrical Engineers and Electrical Designers.
• Create product functional specifications, equipment manuals and training manuals.
• Design/engineer pneumatic systems to meet application requirements.
• Work with Sales, engineers, and potential customers to determine optimal solutions for automating their applications.
• Prepare equipment line integration proposals and sales quotation data.
• Create/develop improvement ideas to make engineering team and company more efficient.
• Develop and modify Rockwell PLC and HMI programs.
• Learn and implement new pieces of electrical equipment in PHC design.
• Develop line controls, motion profiles, etc. to maximize efficiency, throughput, safety and quality for our customers.
• Develop, test and implement software for various systems and equipment.
• Provide electrical installation supervision, commissioning, and equipment start-up in the field at the customer’s site.
• Identify, understand and troubleshoot mechanical issues.
• Train customers to use and maintain systems.
• Act as a project’s point of contact for the customer while working onsite.//**
QUALIFICATIONS AND EDUCATION REQUIREMENTS
• Bachelor’s Degree in Electrical Engineering, or equivalent
• Minimum of five years of successful experience in the development and implementation of automation, electrical design, programming, schematics, control system integration, repair and analysis of electrical applications of automated machinery, product/material handling equipment, packaging and conveyor systems.
• Willingness to learn and implement new equipment/components in both an electrical design and programming capacity.//
PREFERRED SKILLS
•Experience with:
• AC & DC motor drives
• Rockwell Software
• Allen Bradley components
• PLC Programming
• Servo Motion Control
• Vision Systems
• Pneumatics
• Safety PLCs and Controllers
• Basic AutoCAD schematic drawing or electrical package experience
• Proficient in MS Office products
• Knowledge of industry codes and standards
• Ability to rapidly diagnosis, troubleshoot, and debug problems in automated systems
• Ability to work individually and as part of a team
• Results oriented and innovative
• Strong analytical, problem solving and troubleshooting skills
• Ability to work well under pressure and with deadlines
• Ability to visualize a process or system from concept to development
• Strong planning, organizational and decision making skills
• Effective communication and interpersonal skills to interact with customers
• Ability to travel
• Good references with excellent work attendance and attitude.
 
Job Location: Independence, MO
Rate: 54.00
Per Diem: N/A
Overtime: Yes
Duration: 6 mons
Start Date: asap
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: David Reifman
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Palm Beach, FL
$37/hr - $45/hr
9 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description
-Detail oriented Electrical Engineer with 3-5 years experience in circuit design, analysis and implementation.
Experience with component selection and aligning decisions with program requirements to build a quality and affordable product.
-Experience with battery system implementation in systems.
-Role will require engineer to redline drawings and the creation of test procedures.
-AutoCAD skill desired.
-MatLab Skill desired.
-The engineer shall work under the direction of a design lead; ability to take direction and have strong communication skills.
-Desired but not required experience with underwater vehicle development.
-Experience with Power/Energy systems.
-Experience debugging electrical/mechanical assemblies and developing design correction plan.

-Bachelors degree required

Candidate Questions:
years experience with: AutoCAD
years experience with: MatLab
years experience with: Battery System Implementation - Power and energy analysis
years experience with: Circuit Design/Analyis (1+ years required)
 
Job Number: 10264
Job Location: Palm Beach, FL
Rate: 37-45
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( New Church, VA ) 8027260

Description:
Electrical Engineer III ( New Church, VA ) 8027260
12 Month Contract

Pay rate: $50/hr w2 , maybe more for the right candidate.


Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station. The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.
• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required • Experience with rocket systems is required

JOB DESCRIPTION:
• Need a strong Integration & Test Electrical Engineer with rocket systems experience. 10 years of hands-on integration & test experience in a fast paced environment.
Top three skills:
• Hands-on Electrical integration of flight hardware & testing of flight hardware
• Bachelors Degree (BS) in Electrical Engineering
• Developing processes and procedure
 
Job Number: 8027260
Job Location: New Church, VA
Rate: 50
Per Diem: yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer IL

Description:
Request number: 5773
Job title: Electrical Engineer
Number of openings: 1
Position location: Northbrook - IL
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Maximum Hourly Pay Rate: 45
Start Date: 01/07/2019

Function:
The functional expertise required for this contract Engineering Position is primarily in the field of electrical/electronics/software Engineering with significant experience required in building LABVIEW based test jigs and automated test systems.


The contract Engineer is a primary motivator and contributor to the analysis, conceptual design modification, modification, and testing of automated test system for MPT series of products.


To achieve the position of contract Engineer, an individual will have a BS degree in Engineering with experience in building automated test systems for electromechanical, electro pneumatic servomechanisms and communication systems. In addition, he/she must have a proven record of successful development ATE working as individual or a part of the team. He/she must have a proven record of hands-on working with electrical circuits and wiring and should be able to build prototype boards, cables and harnesses.

Essential job functions:
1. Learning and familiarizing with existing application and product line (2 weeks)

2. Update existing Labview software for issues observed with existing products. Going through each communication command-response and adding missing parameters if any. (3 weeks)

3. Fix the issue of Excel specification spreadsheet from multiple users. Also bring the specification spreadsheet under engineering control environment in vault. ( few hrs)

4. Add drop-down customer list. Add feature to retrieve settings from customer specific EXCEL spreadsheets in vault and program the unit under test. (1 week)

5. Add new parameters to report. Most of them are already measured and needed to add to report. (few hrs)

6. Update existing Labview software to include newer products. Same communication protocol but extended command/responses. (8 weeks)

7. Convert existing Labview software for MPT to perform automatic Design validation test. More in detail then software generated after STEP 6 (4 weeks)

8. Convert existing Labview software for automatic board testing at board house. (6 weeks)

Minimum Qualifications:
Bachelor’s degree (B.S.) in Electrical Engineering from an accredited university and at least 3 years of relevant work experience

• Excellent organizational, project management, troubleshooting & technical problem solving skills
• Must be able to adapt to rapidly changing environment
• Able to travel to customer sites, as required, to support sales and account management efforts
• Strong computer knowledge, including Microsoft Office, Minitab and engineering software including but not limited to SPICE
• Ability to work independently and in a collaborative team environment
• Effective communication skills with all levels of technical and operating personnel, both internal and external, via in person, phone and email
• Must be willing and able to exercise inventiveness and independent judgment
• Objects weighing up to 10 pounds are worked with, manipulated and lifted on a repeated basis.
• Objects with small / complex design are worked with, manipulated and lifted on a repeated basis.
• Electronics and or mechanical assembly medical device industry experience
• The ability to rapidly acquire detailed knowledge of the specific systems used at MCG
• Familiar with and experience with EN60601-1 electrical safety requirements
• Ability to develop and implement new manufacturing methods and processes
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Preferred Qualifications:
• Bachelor’s degree (B.S.) in Electrical Engineering from an accredited university and at least 5 years of relevant work experience
 
Job Number: MB-5773
Job Location: Northbrook, IL
Rate: 45/hr max
Per Diem: no
Duration: 5 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 3

Description:
seeking an Electrical Engineer Level 3 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Analog and digital electronics, PCB, Verilog, FPGA Design Engineer. Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

REQUIRED EXPERIENCE:
Electronic Circuit Design Engineer. Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required. Excellent communication skills. Requirements flow down preparing and presenting design reviews.

PREFERRED EXPERIENCE:
Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design. Test engineering experience - hands on with laboratory test equipment. Integrated circuit design. MATLAB, C++, and other programming. Proficient with electronic design and simulation tools.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, 1st Shift
Full-Time

Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.

Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.



© 2018 Chipton‑Ross Inc. All rights reserved
 
Job Number: 175873
Job Location: santa barbara, CA
Rate: Up to 75.00 DOE
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 4

Description:
Electrical Engineer Level 4

Centennial, CO
$50/hr - $62/hr
6 month Contract
First Shift, exempt OT

Job Description / Task / Responsibilities:
Planning, executing and issuing reports for Spirent simulations specific to ULA implementation of launch vehicle GPS blended navigation. This includes authoring test procedures, running the tests on the Spirent system, consulting with the appropriate ULA CREs when necessary, and documenting test results.

Top 3 Skills Required:
Knowledge of GPS and INU (Inertial Navigation Unit) systems in high dynamic applications such as launch vehicles or other equivalent aerospace systems
Ability to conduct Spirent simulations
Ability to operate independently in a lab environment with a proficiency working with test equipment
Experience using a 1553 bus analyzer

Top 3 Skills Preferred:
Familiarity with generating ULA procedure and reports
Knowledge of ULA ADMS Telemetry System
Experience using the Excalibur 1553 bus analyzer or equivalent

Systems Used:
Spirent, ULA ADMS Telemetry System, Excalibur 1553 bus analyzer

Number of years of experience:
5 years experience with GPS and INU systems in high dynamic applications
1 year experience with running simulations on Spirent

Education Requirements:
BSEE or equivalent degree, although if someone already has all the experience/skills/knowledge listed above, we would consider that as an acceptable substitute

Additional note:
The candidate must have experience with launch vehicles / missile GPS navigation. Automotive background not applicable for this role. Degree is great but not a showstopper. The 1553 communication protocol is mandatory; ULA uses Excalibur but any other similar tools are OK. The manager is more interested in someone who understands the communication protocols and can look at messages and troubleshoot where/if needed independently but also engage ULA SME to weigh in as applicable; someone who is familiar with working in a lab environment. Experience with high dynamic applications is a must.
 
Job Number: 10217
Job Location: Centennial, CO
Rate: 50-62
Per Diem: Split Possible
Overtime: No
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Hardware Engineer

Description:
Major purpose:

The Electrical Engineer will be involved with full life-cycle product development with a focus on digital and firmware design.



Primary tasking will include:

Focus on Firmware design, Product requirements, Box level integration, System integration, System test, Detail design process. Support tasking will include: Creation and maintenance of wiring diagrams and cable assemblies, Liaison support to onsite and remote manufacturing, Product installation, Schematic capture, Circuit board design, etc. Sets the highest ethical standards for self and others. Other engineering duties as assigned.



Education/Experience/Licenses etc.:

" With BS in Electrical Engineering or related field, must have at least seven (7) years of relevant experience.

" Relevant experience includes: FPGA design experience, VHDL or Verilog proficiency, HDL simulation tools, Tcl scripting familiarity, Strong troubleshooting mentality, Team-oriented and task-focused, Software or firmware design principles, Operate spectrum analyzers and oscilloscope.

" Preferred Experience includes: Xilinx Vivado experience, Analog and digital hardware design experience, Embedded software integration experience, Source code repository (Git, Subversion, etc.), Source code peer review processes, Bug tracking tool suites, Automated build environments, Strong electrical engineering fundamentals, AutoCAD

" Must be able to obtain and maintain a Security Clearance which requires US Citizenship.

" Must be able to work weekends and overtime as required.

" The essential physical requirements of the position will be reviewed with the applicant during the interview.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 18-51714
Job Location: Waco, TX
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-07 00:00:00.0
Start Date: 2018-12-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
The ideal candidate will manage a large team or multiple projects in design and planning of layout for assembly and materials handling. You will: •adapt machines or equipment design to factory and production conditions.
•plan sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Bachelor's degree is required.
Will consider candidates with a minimum of 5 years of experience as Manufacturing Engineer.
Must have excellent verbal and written skills, technical writing documentation skills.

The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
•Mentor Manufacturing Engineering Associates on instilling a Design to Cost mind-set and work to streamline the delivery of manufacturing assembly documentation as well as its use by lab personnel.
•Develop the specific methods and instructions for manufacture and/or assembly of products.
•Determine manufacturing feasibility to: •Identify potential fabrication problems,
•Draw attention to special fabrication requirements and
•Ensure the latest developments in manufacturing technology are considered in the design phase.
•Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to:
•ensure that the proposed design is within the allowable cost.
•participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
•establish touch labor cost targets on shop/lab activities as requested.
•define tool and gauge requirements.
•provide the necessary input and support to the tool design group.
•ensure adequate tools and gages are available when needed in the process.
•work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
•provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
•review and implement engineering changes to determine feasibility, producibility and delta cost impact.
•determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
•lead efforts to understand non-conformances and reduce Cost of Poor Quality.
•lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
•BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
•10- 15 years of experience required.

Experience/Qualifications
•Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
•Background courses in electrical design and/or manufacturing are desired.
•Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 1810096291
Job Location: Windsor Locks, CT
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages large team or multiple projects in design and planning of layout for assembly and materials handling.
- Adaptation of machine or equipment design to factory and production conditions.
- Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
- Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
- Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to:
- Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
- Establish design inherent cost targets which reflect hardware target cost.

- The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
- Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
- Establish touch labor cost targets on shop/lab activities as requested.
- Define tool and gage requirements.
- Provide the necessary input and support to the tool design group.
- Ensure adequate tools and gages are available when needed in the process.
- Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
- Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
- Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
- Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
- Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
- Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
- BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
- 10- 15 years of experience required.

Experience/Qualifications:
- Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
- Background courses in electrical design and/or manufacturing are desired.
- Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
- Must have excellent verbal and written skills, technical writing documentation skills.
 
Job Number: 10211
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Lead Engineer

Description:
Seeking an Electrical Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Electrical Power Generation System (EPGS), Electrical Power Distribution System (EPDS), Electrical Wire Interconnection Systems (EWIS) and the Science of Electrical Engineering (G&B, EMC, EMI, HIRF, LSP, etc.). The successful candidate will manage the various electrical systems design and completion partners, as well as all design and certification activity required. The Electrical Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop electrical systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of electrical systems
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Perform electrical systems tests and certification, and provide system and certification documentation
• Manage the electrical subsystem scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Electrical subsystem resources to meet the milestones of the AS2 program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing electrical systems from concept through certification strongly desired
 
Job Number: 42-004
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership.
Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
 
Job Number: ESDEC2018
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Engineer-Direct Hire



Burlington Area

Base Salary 110k-130k 

 

  • Provide technical leadership and serve as a leading individual contributor to the concept, design, development, and test of system modules and integration, including electro-mechanical and electro-optical interfaces

  • Test, evaluate, troubleshoot and diagnose electronic and electro-mechanical issues

  • Coordinate development activity with consultants and outside organizations as necessary

  • Meet project schedules and product specifications

  • Identify/specify parts, components, and assemblies

  • Work with key suppliers to ensure on-time delivery of critical components

  • Design critical control elements for high-precision optical systems

  • Regular reviews project updates and reviews

  • Operate within a cross functional team, understand the needs and requirements of internal stakeholders as well as external customers

  • Prepare and chair design reviews


Qualifications


  • A Bachelor’s degree or higher in electrical engineering or well-related field

  • Demonstrated ability to conceive, design, and produce precision control systems of varying degrees of complexity

  • Solid knowledge and understanding of analytical investigations of electrical/electronic/motion-control equipment, including diagnostic troubleshooting, motion analysis, timing diagrams for interacting components

  • Working knowledge of position sensing and optical measuring components

  • Simulation experience (e.g., SPICE, MATLAB)

  • Solid ability to use test equipment (oscilloscopes, voltage probes, waveform generators, gauss meters, etc.)

  • Experience working with and selecting linear motors and related supporting components

  • An understanding of magnetic field interactions with solids and the potential for material heating and drag

  • Experience working with and directing a collaborative, cross-functional team development effort

  • Experience working with and managing suppliers of critical parts and components

  • A working knowledge of C/C++ and Linux OS a plus

  • Knowledge of and experience in light sources, optical sensors, and sensor fusion is a plus

  • Experience in the semiconductor capital equipment industry and familiarity with UL, CE, SEMI, and RoHS standards is a major plus.

  • Helicopter view, identify and understand priorities and main risks

  • Highly pro-active, thinks ahead, reports issues and setbacks promptly

  • Team player on all levels

  • Excellent communication and interpersonal skills


Relocation assistence is not available for this position
 
Job Number: 18-51999
Job Location: North Reading, MA
Rate: 128000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-02 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kyle Hughes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems and Equipment (DER)

Description:
Electrical Systems and Equipment Designated Engineering Representative (DER) or Engineering Authorized Representative (EAR) within an Organization Designation Authorization (ODA Unit-member). This person, if not already an EAR within companies ODA will be expected to be qualified to make application to be added to companies Enterprise ODA as an Engineering AR upon being hired into the company. Should be qualified to review engineering data, review and approve test plans and reports, system test witnessing and review/approval of electrical load analysis. Additionally, Major Repair and Alteration approvals will be required of this position under the ODA. Fault Hazard assessment and System Safety assessments are a plus, but not necessarily required. Candidate should aspire to have these added to their list of authorities if not already present.
Electrical Systems and Equipment (DER) works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs. specific technical discipline or 15 yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Design Engineer

Description:
Wiring and Harness Design. Coordination of 3D data for implementation into harness drawing packages.
Experience with IGE-XAO is preferred: Mentor Graphics, Autocad, Zuken .
Good working knowledge of EWIS is desired.
 
Job Number: HEE
Job Location: Greensboro, NC
Rate: open
Per Diem: possile
Overtime: possible
Duration: 6 month plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness 3

Description:
RESPONSIBILITIES:
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.
Responsibilities will include drafting of electrical cable designs and electrical assemblies for aerospace programs utilizing AutoCAD Electrical. Create preliminary block diagrams, wiring diagrams and detailed assemblies such as cable assemblies, Circuit Breaker assemblies, Relay assemblies etc. Candidate will work with a team to develop work products that are generated in accordance with existing templates, checklists and standards. Work products are peer reviewed for design accuracy and quality. Must have a basic understanding of electrical engineering concepts.

REQUIRED EXPERIENCE:
High School diploma or equivalent and 4 years' additional education and/or related experience.
Preferred Qualifications:
Experience developing drawings to ASME Y14.X standards, using CPLM or similar configuration management tools. Knowledge of instrumentation wiring applications, TEMPEST design constraints on electrical cable wiring, EMI/EMC effects on electrical cable wiring, aircraft-type cable assemblies and MIL type wiring and components such as connectors, back shells, shielding techniques, using design direction from Electrical Engineers. Microsoft Office and strong verbal and written communication skills and ability to work as a team are preferred.

EDUCATION:
High School diploma or equivalent is required.

HOURS:
9/80 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.

Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.



© 2018 Chipton‑Ross Inc. All rights reserved
 
Job Number: 176062
Job Location: melbourne, FL
Rate: Up to $27.00 DOE
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: chris conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*



We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.



Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent



Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.
 
Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Packaging Design Engineer

Description:
Mentor Expedition Printed Circuit Board (PCB) Designer-
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following:

• Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
• Ensure that all requirements for manufacturing and assembly are met.
• Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
• Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• An Associate’s Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.
 
Job Number: EPDE2018
Job Location: El Segundo, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic/Electrical Design & Analysis Engineer III - (Oklahoma City, OK)

Description:
Several openings in Oklahoma City.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Maintenance Technician I

Description:
This position is for an alternative work shift that works 4-10hr days Thursday-Sunday.

Our client is looking for an Electronics Technician Maintenance to work in Lexington, Kentucky! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment.
* Fabricate harness and electrical assemblies.
* Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish work.
* Work under close supervision receiving technical guidance from supervisor or higher-level technician.
* Work is checked frequently for accuracy.
* Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools and applicable test equipment.
* Experience in utilizing electrical test equipment such as digital multi-meters and oscilloscopes.
* Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals

Mandatory Qualifications and Experience:
* Minimum 2 years’ experience installing and testing of aircraft electrical/avionics systems.
* Successful completion of a military or civilian equivalent electrical/avionics training course.
* Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals/technical orders.
* Must have a Secret clearance.
* Able to work an alternative work shift of 4-10hr days Thursday-Sunday.

Desired Qualifications and Experience:
* Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
* Experience soldering.
* Experience with harness fabrication

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129531
Job Location: Lexington, KY
Duration: 3 months
Start Date: 01/21/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437
1219-1 Electronics Technician
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/29/2019
End Date: 7/29/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

**Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $33.00 Hourly
 
Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 33/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer IV - Electromagnetic Compatibility - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ElectroPhysicsOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Employee Development Spec 3

Description:
Employee Development Spec 3
 
Location: Everett, WA
Duration: 6 Months
 
Job Description:        
Conducts learning requirements analysis and establishes learning objectives. Designs and develops course content and instructional materials. Tests delivery environment and establishes system access requirements. Delivers content and assesses effectiveness based on learning objectives. Conducts customer workplace coaching sessions to improve individual or group performance. Deploys development tools and monitors implementation and performance outcomes. New hire core skills assessment and instruction.
 
Education / Experience:         
6 or more years' related work experience in aerospace drilling and fastener installation or electrical.
 
Skill Code: F31-Delivery and Facilitation

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-18642
Job Location: Everett,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Automation Technician

Description:
We are seeking a motivated Engineering Technician for our new seven-acre greenhouse. This position will be located in Marana, AZ, reporting to our Automation Systems Lead.

This position will implement the site’s robust maintenance program. This program will include preventative maintenance, real time troubleshooting/debugging and continuous improvement.

Key Responsibilities:
• Perform scheduled maintenance on a wide variety of automation equipment including but not limited to: conveyor systems, item counting machines, pumps, valves, environmental control systems and other PLC controlled automation systems
• Work with growers and functional teams to diagnose and troubleshoot issues arising from daily operation of automated material handling systems
• Interact with computerized maintenance management systems (CMMS) to document maintenance events
• Collaborate with a team of engineers, biologists, scientists and more to deploy new automation systems and provide continuous improvement to existing designs

Required Skills/Experience:
• Associates degree or certified training in automation/engineering related field
• High degree of mechanical aptitude, and general knowledge of equipment reliability & maintenance
• 2-5 years of hands on experience troubleshooting automation systems with a holistic approach including
o Mechanical system adjustment
o Electrical diagnostics
o Software/HMI manipulation
• Familiarity with Microsoft Office suite of tools

Desired Skills/Experience:
• Conveying equipment or packaging system experience
• Basic familiarity with agriculture or horticulture
• Experience with CMMS
• Experience with 3D printing and/or 3D modeling
 
Job Number: 57M
Job Location: Marana, AZ
Per Diem: Possible
Overtime: possible
Duration: LT
Start Date: 1/21/2019
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Trudy Pollard
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Project Management-UTMST

Description:
Manage high complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Project Engineer to Manage a team and provides direction development, design, and testing of components, for manned space applications. This will included extensive supplier technical management. The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components. Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. This position requires creation and delivery of technical presentations to management and customers.

*Education / Certifications • BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - • 4+ years leading teams and managing projects
 
Job Number: 133
Job Location: Windsor, CT
Rate: BOE
Per Diem: NO
Overtime: TBD
Duration: 12 months
Start Date: 01/20/2019
Input Date: 11/14/2020
Firm Name: RCM TECHNOLOGIES INC
Attention: Kelly Krupa
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Vandenberg AFB, CA
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of our clients Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team.
- The successful candidate will provide management of Delta IV SLC-6 facility maintenance activities, consisting of periodic maintenance and repair of launch facility, HVAC, electrical, civil, structural and mechanical systems.
- Maintenance activities are performed by both contractor and company represented employees.
- Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance.
- Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support.
- Will work with various government support groups including Air Force and Base Civil Engineering personnel.
- Will specify and order various types of facility equipment.


Requirements:
- Experience with facilities engineering and plant operations.
- Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
- Plans, designs and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities.
- Gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility.
- Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
- Prepares bid sheets and contracts for construction and facilities acquisition.
- Reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.


Education:
- Requires a bachelor’s degree and 4 -8 years of experience.
 
Job Number: 9834
Job Location: Lompoc, CA
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer III

Description:
Our client is looking for a level 3 Hardware Engineer to work in Owego, New York! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Performing Hardware Board design activities for various programs and IRAD projects
* Design and develops Printed Circuit Boards -Generates documents using tools for schematic; The designs are dense, high-speed, multi-layer boards.
* Working with Hardware Engineering Team to complete Hardware Development
* Understand and develop with the engineering team on material selection, impedance calculations, high speed design, cross talk limits, differential pairs, PCB stack-ups, PCB via structures, etc. during the design phase, and generate and perform reviews on the artwork and drawings once the design is ready for fabrication and assembly.
* Interface with Mechanical engineers, Suppliers, Component Engineering, Program Managers and Project team members as needed to develop cost effective high quality design.
* Supporting IPT teams, EPM and Program Office staff to meet all customer objectives and program milestones.

Mandatory Qualifications and Experience:
* Digital Board Design experience.
* 3+ years of experience with Printed Circuit Board design
* Knowledge of Zuken design tool
* Digital Signal Processing knowledge
* Computer Engineering/ Electrical Engineering
* Expertise High density PCB design that includes Power, Digital, and Analog layouts

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129537
Job Location: Owego, NY
Duration: 6 months
Start Date: 02/04/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument & Controls Designer

Description:
The Project Engineering Electrical Designer is responsible for completion of electrical design and drafting duties related to all areas of the plant and associated engineering disciplines. This individual works independently on job assignments, taking basic project information and producing finished engineering drawings suitable for bidding and construction. Documents produced include electrical schematics, connection diagrams, motor schematics, loop diagrams, electrical classification drawings, civil drawings, installation details, miscellaneous construction and as-built drawings. The design/drafter may be responsible for making project design decisions.

Scope / Specific Responsibilities of the Position:
 Electrical & Instrumental system design decision making.
 Applying sound project design engineering principles.
 Ensure systems and equipment are designed and installed in accordance with Bayer and regulatory standards.
 Assist with project reviews and system design.
 Review field installations to ensure compliance with design.
 Verification and completion of as-built drawings.
 Development construction drawings.
 Work directly with Project Engineers, Project Planners and Construction Field Coordinators to define project implementation requirements.
 Develop electrical & instrumentation drawings
 Field verification as required to support project design.

Principal Duties and Responsibilities:
Develop electrical & instrumentation drawings 60%
Updating as-built drawings 30%
Assist Project Construction Coordinator as needed with construction activities 5%
Work with Project Planner to establish resources 5%

Minimum Required Qualifications for the Position:
Education: Associate degree in Drafting/Design Technology or equivalent
10 years experience in electrical & instrumentation design in the process and industrial field

Ideal Candidate Will Possess:
 Excellent MicroStation CADD operating skills.
 Field verification technique knowledge.
 Understanding of electrical & instrumentation design practices and regulations
 In-depth knowledge of design codes, standards and regulations (i.e., OSHA, ADA, ASME, etc.) as may be applicable to electrical & instrumentation.
 Previous manufacturing experience - particularly with process related equipment (i.e., pumps, piping and heat exchangers, etc.).
 Capable of working independently.

Description of Specific Work Conditions and Physical Requirements:
This position is in a manufacturing environment that requires:
 The ability to ascend and descend stairs on a periodic basis.
 The ability to access all areas of the plant.
 This position requires working the Muscatine Plant core business hours.
 Extended hours and weekend work required when needed to support plant activities
 
Job Number: 96M
Job Location: Muscatine, IA
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Amy Kloeppinger
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument & Controls Designer (mid-level)

Description:
Conducts complex design assignments for the Engineering Department and functions as a technical specialist, formulating and developing advanced design concepts.
ESSENTIAL JOB DUTIES/RESPONSIBILITIES:
• Develops I&E Engineering Standards.
• Defines Projects by determining project objectives, selecting technical strategies and providing technical assistance to the business unit(s)
• Plans Projects by writing work scopes, developing schedules.
• Follow construction of Electrical / Instrumentation Projects (with Engineering approval)
• Implements Projects by monitoring performance, taking corrective actions, providing feedback to project.
• Solves technical problems related to projects and troubleshoots and updates report data for business unit(s)
• Ensures the maintenance and integrity of business unit(s) data
• Conducts research to support engineering in the development of electrical distribution and process controls
• Designs and plans layouts necessary for the installation of electrical and instrumentation as directed by engineering.
• Determines most effective arrangement of Electrical, Instrumentation & Controls; such as Burner Management, Safety Instrumented Systems, and Power Distribution Equipment
• Investigates and resolves work-in-process problems
• Special assignments or tasks assigned to the employee by their supervisor, as determined from time to time in their sole and complete discretion.
• Develop one line diagrams with emphasis on high voltage consistent with NFPA 70E (arc flash)
• Experience working with ETAP or similar programs for managing Arc Flash data.

EXPERIENCE:
A minimum of eight years of progressive work experience in electrical, instrumentation & controls is required. Emphasis on controls engineering and power distribution is required. With a minimum of 1 year developing medium and high voltage systems with record keeping consistent with arc flash.
PREFERRED EXPERIENCE:
Refinery or petrochemical industry experience is preferred.

EDUCATIONAL LEVEL:
A minimum of a Bachelor’s Degree in a technical discipline or equivalent amount of experience is required.
REQUIRED SKILLS:
Ability to manage a project is essential. Working knowledge of commonly used engineering concepts and ability to apply this knowledge analytically. Ability to stay abreast of new technology developments and processes is essential. Technical experience in medium and high voltage systems development. Ability to effectively communicate with others, both written and verbal communication. Advanced reading and writing skills, with the ability to perform complex mathematical calculations. Experience with the record keeping requirements of arc flash and the systems used to maintain the data.
PREFERRED SKILLS:
Working knowledge of Microsoft products and experience with engineering software is preferred.
The program we use to manage the requirements of NFPA 70E is ETAP, experience using this or similar programs used to manage arc flash analysis desired.

SUPERVISORY/MANAGERIAL RESPONSIBILITIES:
May be responsible for the supervision of personnel assigned to project.
WORK CONDITIONS:
Office and plant based, no out of plant travel required. Petroleum refinery, warehouse/plant environment, out-of-doors environment, and driver based environment including but not limited to chemicals, pressure vessels, tanks, rotating equipment, loud noises, vibrations, and exposure to the risk of electrical shock. Subject to all temperatures, weather and varying road conditions.
 
Job Number: 09H
Job Location: Tulsa, OK
Per Diem: Possible
Overtime: Possible
Duration: approx. 6-10 mo.
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Trudy Pollard
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument & Controls Engineer

Description:
Description
• Instrument & controls engineering including front-end planning, I&C quantity and cost estimation, conceptual studies, detailed design, factory acceptance testing (FAT), and construction & commissioning support for EPC projects in Oil & Gas refineries and Chemical industrial facilities. Work in a project team environment under direct supervision of an I&C lead.Burns & McDonnell maintains a strong focus on quality deliverables which are completed on schedule.
• Prepare instruments and control systems specifications, instruments and instrument valves data sheets, RFQs, technical bid summaries, and purchase recommendations.
• Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.
• Participate in the development of P&ID's and equipment/subcontract package specifications.
• Develop logic diagrams, instrument index, I/O list, cause & effects, and control narratives.
• Able to support construction and startup & commission activities in the field, when required\
• *Note - non-local candidates will be considered but per diem/expenses are not offered for this position*

Qualifications
• B.Sc. degree in Electrical, Chemical, or Mechanical engineering with Minimum 7 years of I&C related experience
• EPC project experience is desirable
• Excellent written & verbal communication and interpersonal skills
• Ability to lead analysis and resolution of technical problems
• Must be willing and eligible to obtain or currently hold a valid Transportation Worker Identification Credential (TWIC)
• This position requires an individual capable of taking variety of project assignments and willing to grow professionally
• Previous engineering experience within Oil, Gas, Chemical industry is preferred
• PE license is preferred, ability to get the PE license is required
• 20% travel is required
 
Job Number: 70Z
Job Location: Kansas City, MO
Per Diem: Possible
Overtime: possible
Duration: approx. 6 mo.
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Trudy Pollard
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intrument Engineer (OK)

Description:
The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and Client standards and practices to perform the above functions.

Responsibilities may include:
• Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.
• Identifying areas where instrumentation/controls can improve plant operation and profitability
• Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.
• Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects
• Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings
• Supporting criticality assessments of the plant's instrumentation equipment
• Designing Refinery Safety Instrumented Systems (SIS) design and maintenance
• Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems
• Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)
• Performing audits of instrumentation installations and process control loops including failure analysis inspections
• Interacting with engineering and construction contractors, both on- site and off- site
• Review instrument changes for Management of Change approval. Ensure that changes are properly designed and documented.
• Assist with training and development of operators, technicians, and engineers to high-grade skill sets with respect to the instrument asset base.
• Support DCS operator interfaces with respect to information presentation and abnormal situation management.
• Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant’s instrumentation assets. Provide leadership for implementation of these reliability systems.

QUALIFICATIONS

Basic/Required:
(Remember, anything listed in this section is a qualification the candidate MUST have to be considered.)
• Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent
• 3+ years of experience in a refinery and/or chemical industry
• 3+ years of direct experience in process instrumentation design and/or maintenance.

Preferred: (Candidates do NOT have to have all of the items listed in this section to be considered.)
• Knowledge of the Ponca City Refinery instrumentation asset base.
• Proficient in use of SAP - PM & PS Modules
• Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).
• Proficient in computer applications such as Word, Excel, Outlook, and MS Projects
• Expert knowledge of field instrumentation and controls through design and field installation experience
• Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Honeywell TDC3000 / Experion and FSC Safety Managers.
• Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.
• Demonstrated knowledge and use of SPI (InTools) database and specifications
• Strong analytical skills including statistical analysis
• Strong interpersonal and written communication skills
• Ability to lead execution of work and resolve issues in a team environment
• Accepts ownership, is accountable, and delivers on commitments
Ability to work in cross-functional teams

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays, with no waiting period
• Immediate 401K participation with Voya, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Accrual
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010719OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Electrical Systems

Description:
• Assesses and resolves product/process issues through the product lifecycle.
• Support daily production, completions and delivery operations
• Assist with production, quality and the customer; provide engineering with dispositions of Material Review Board/concessionary requests & resolution of query’s raised on all assigned projects
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances
• Work in close cooperation with other engineering disciplines to achieve the company’s business objectives.
• Maintain a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy and effectiveness of company products
• Develops and implements product/process improvements
• Recommend new processes where needed for quality improvement, cost reduction and on-time delivery.
 
Job Number: 18-819
Job Location: Northeast
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technicians

Description:
STS Technical Services is Hiring Maintenance Technicians in Menomonee Falls, Wisconsin.

Job Summary:

The Machine Maintenance Specialist has demonstrated expertise in installing, repairing, rebuilding, and maintaining heavy duty and highly complicated precision machine tools and equipment.

Essential Duties & Responsibilities:

Activities of the position include, but are not limited to the following:

Gets work assignment from Supervisor, Lead person or scheduling tools
Diagnoses complex machine malfunctions and operating difficulties
Makes highly complicated machine repairs and adjustments
Rebuilds the most complicated machines and overhauls troublesome components and attachments
Works from machine design drawings, specifications, and handbook formulas
Performs skilled operations

Examples:

Fits and aligns bearings, spindles, and shafts
Fits, aligns, and calibrates machines
Troubleshoots and repairs CNC controls
Performs housekeeping duties
Assists other work areas or departments as needed
Assists in cross-training others

Qualifications:

High school diploma or equivalent is required
English literacy
Basic math skills / ability to do this job
Basic blueprint reading skills/ability to do this job and familiarity with machine schematics and symbols
Knowledge of machine drive components, bearings, pumps, piping systems, hydraulics, and pneumatics
Knowledge of precision measuring procedures
Knowledge of programmable controllers, ladder diagrams, machine logics, and electronic design
Knowledge of mechanics, machine design, machining practices, electrical design, and electronic functions and techniques
Knowledge of electronic principles, AC/DC electrical, AC/DC drive controls, and solid state electronics
Technical degree or equivalent experience or education.
Basic knowledge of computers including windows applications
Physical ability to do the job
Demonstrated competence in performing the Maintenance Specialist activities listed above
Practical and written test required

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44322
Job Location: Menomonee Falls, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Completions, Planning)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Electrical Engineering, Planning
Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I / no clearance NM

Description:
163811 Manufacturing Engineer I
There are 6 openings!

Work Site Address : Albuquerque NM
Job Number: 8853403
Max Pay Rate: 45.00


Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

• Involved in all phases of product life cycle, beginning with proposal development and advanced manufacturing initiatives, continuing through production implementation and extending to support of our customer and supply chain
• Work on a wide range of weapon systems, from tactical missiles to strategic defense products
• Design, control, and improve the manufacturing process and system design through a collaborative effort with the value stream team
• Reduce cycle time and customer lead time
• Reduce inventory
• Improve productivity
• Reduce material cost
• Improve performance of the value chain
• Manufacturing process control and performance monitoring
• Planning and incorporation of design changes
• Creating and overseeing projects using risk management techniques
• Translating engineering design requirements into formal manufacturing process documentation Disposition of discrepant hardware
• Leading corrective action investigations to prevent recurrence
• Developing tooling concepts
• Interfacing with customers and suppliers
• Providing technical leadership to multi-disciplined teams
• Ensuring quality, cost, and schedule objectives are achieved
Production technologies employed include:
• Equipment driven processes
• Material handling practices
• Statistical process control
• Lean principles


Required Skills
• Technical problem solving
• Engineering interpretation of technical documentation
• Team leadership
• Project and risk management

Desired Skills:
• Advanced manufacturing technologies
• Practical knowledge gained through previous related employment Required Education: This position requires a Bachelor of Science or Master of Science degree from an ABET accredited engineering curriculum in a field such as Manufacturing Engineering, Industrial Engineering, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Chemistry, Physics, or related field with a minimum cumulative GPA of 3.0 or higher.
 
Job Number: MB-R8853403
Job Location: Albuquerque, NM
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2 needed)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Electrical Engineering, Planning

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-306
Job Location: Savannah, GA
Rate: $52.50
Per Diem: 1/2 of hourly rate, 1st year
Overtime: Yes, 1.5
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Manufacturing Planner 3
 
Location: Everett, WA
Duration: 6 months
 
Job Description:
The client is seeking Electrical Manufacturing Planners to support the 777/777-9 programs in Everett, WA.
Responsibilities include the following:
- Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Leads investigation and resolution of complex or systemic manufacturing related issues.
- Develop work statements and sequencing of events to support delivery commitments.
- Leads development of complex work statements and sequencing of events to support delivery commitments.
- Develops and documents new job practices, techniques and standards
- Provide ship side support, research and shop assistance.
 
The successful candidate will have the following education, experience, skills and capabilities:
 
Required Qualifications:
- Minimum 6 years of experience working in a manufacturing engineering or a production environment
- 6 or more years experience using basic Microsoft Office and office computing systems
 
Preferred Qualifications:
- Experience using Common Manufacturing Execution Systems (CMES)
- WIRS - Wires Information Release System
- PMD/ CAPP II
- IVT - Integration Visibility Tool
- WQCS - Wires Query/Compare Systems
 
Understanding of wiring and wire routing.
Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions is desirable.
Understanding of the client Production System.
 
Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Skill Code: 67B-Electrical/Electronics
 
Job Number: 18-20613
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 1/7/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III - Electrical/Electronics (Everett, WA)

Description:
Several openings in Everett, WA.

•Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Leads investigation and resolution of complex or systemic manufacturing related issues.
• Develop work statements and sequencing of events to support delivery commitments.
• Leads development of complex work statements and sequencing of events to support delivery commitments.
• Develops and documents new job practices, techniques and standards
• Provide ship side support, research and shop assistance.
The successful candidate will have the following education, experience, skills and capabilities:

Required Qualifications:
• Minimum 6 years of experience working in a manufacturing engineering or a production environment
6 or more years experience using basic Microsoft Office and office computing systems

Preferred Qualifications:
• Experience using Common Manufacturing Execution Systems (CMES)
• WIRS - Wires Information Release System
• PMD/ CAPP II
• IVT - Integration Visibility Tool
• WQCS - Wires Query/Compare Systems

Understanding of wiring and wire routing
Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions is desirable.
Understanding of the Boeing Production System
The successful candidate will have the following education, experience, skills and capabilities:

Required Qualifications:
• Minimum 6 years of experience working in a manufacturing engineering or a production environment
6 or more years experience using basic Microsoft Office and office computing systems
 
Job Number: MFGPlannerWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: $50
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
MECHANICAL DESIGNER
A respected mechanical, electrical, plumbing, fire protection, and lighting design engineering firm in Tulsa is currently seeking a Mechanical Designer to provide Mechanical/HVAC design services on a variety of commercial building projects.



RESPONSIBILITIES:



  • Technical design on assigned projects

  • Assist in the production of construction documents (drawings and specifications) for new buildings, and for renovations and additions to existing facilities

  • Perform initial site investigations and observations of work done by the installing contractor(s) related to contracted projects

  • Provide coordination of project designs with other disciplines

  • Maintain assigned project schedules

  • Develop and maintain positive client relationships



QUALIFICATIONS:



  • Bachelor's degree in Mechanical Engineering (preferred)

  • Three+ years of experience in HVAC/plumbing design in the MEP field

    Related experience in the design of commercial building HVAC and plumbing systems

  • Knowledge of building mechanical codes and ability to perform accurate load calculations

  • Knowledge of sustainable design practices

  • Possess excellent verbal and written communication skills

  • Highly proficient in the use of Revit, AutoCAD and engineering modeling tools



 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-01333
Job Location: Tulsa, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician CA

Description:
163665 Job ID# 21501BR
Title Mechanical Technician
Job Summary General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The Computer and Diagnostic Systems DIII-D/ITER team within the Energy affiliate company of General Atomics is seeking a talented Sr. Technician to work out of the Torrey Pines, CA office.

DUTIES AND RESPONSIBILITIES:

Under limited supervision, the Sr. Technician will be responsible for:•Responsible for fabrication, modification, installation, and documentation of complex laboratory, experimental or commercial equipment, including diagnostics (instruments)
•Interprets general instructions or detailed mechanical drawings, plans sequence of assembly, maintains quality assurance documentation and prepares sketches and schematics, with a working knowledge of RF and High voltage engineering principles
• Assist in the design and maintenance of basic lab, experimental, and commercial equipment.
•Maintains a clean and organized work space.
•Operates specialized equipment and/or performs tests requiring knowledge of processes pertinent to the organization, program or project.
•Responsible for execution of a set of laboratory experiments or for a complex laboratory function.
•Diagnoses and corrects operational problems or trouble sources in equipment or tests. Interprets basic information displayed to recognize when various operating measurements are drifting out of established parameters. Adjusts operating parameters to bring systems back to satisfactory operating conditions. Develops solutions to problems that occur including assisting in the design of specialized components.
•May provide direction to other technicians or craft personnel in construction and maintenance of equipment, operation of tests, or laboratory.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
•Perform other duties as assigned.


Qualifications Essential Qualifications Typically requires associate's degree or equivalent with seven or more years of experience. May substitute equivalent experience in lieu of education. Ability and willingness to work on systems which have unusual conditions such as high pressure, high voltage, high energy, cryogens, or radioactive materials. Knowledge of computer operations and applications pertinent to the field required. Must have analytical ability to read and understand detailed instructions, drawings and specifications. Communication skills necessary to write and record precise information. Special skills and expertise to use complex equipment or experimental techniques.
Additional Qualifications - Requires Associate’s degree or equivalent, with seven or more years of experience. May substitute equivalent experience in lieu of education.
- Ability and willingness to work on systems under unusual conditions involving high pressure gasses, high voltage, cryogens, high energy, radioactivity, etc.
- Proficiency in 3D CAD software such as Solidworks.
- Experience with various machining techniques (lathe, mill, CNC, etc.) and vacuum systems.
- Skill with soldering high precision assemblies.
- Must have analytical ability to read and understand detailed instructions, drawings and specifications.
- Must be able to lift up to 25 lbs.
- Communication skills necessary to write and record precise information.
- Experience with lasers, high voltage, RF electronics and basic knowledge of physics and electrical engineering is desired.
- Pay rate: $30-$35/hour
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 5/40

Temp Assignment Duration (# of Days) 180
 
Job Number: JE-21501
Job Location: San Diego, CA
Rate: 30-35/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Plans and organizes structural analysis work at the program level to assure total compliance with structural integrity and stability requirements. Develops, integrates and documents complex or unique structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by defining requirements for development of analytical methods, finite element models/simulations and other analysis tools to develop the structural environment, characteristics and performance of the product. Works with customers and regulatory agencies to define certification processes that will ensure requirements are met. Reviews and approves certification results. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and organizes test programs to substantiate for customers and regulatory agencies that requirements are satisfied. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop future product designs to meet projected requirements. Works under consultative direction.

This position requires broad traditional structural analysis skills ranging from very good hand calculation skills to finite element modeling skills and also requires significant experience in fatigue analysis, durability and damage tolerance of mainly aircraft primary and secondary metal structure. Both military and commercial Boeing aircraft experience is a definite plus as well as familiarity with applicable MIL and Boeing aircraft design/analysis specifications.

Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: SA_OK2019
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 8 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping/Mechanical Designer

Description:
The Project Engineering Piping/Mechanical Designer is responsible for completion of piping design and drafting duties related to all areas of the plant and associated engineering disciplines. This individual works independently on job assignments, taking basic project information and producing finished engineering drawings suitable for bidding and construction. Documents produced include engineering flow diagrams, civil drawings, detailed equipment arrangements, installation details, piping plans, piping isometrics, electrical drawings, miscellaneous construction and as-built drawings. The design/drafter may be responsible for making project design decisions.

Scope / Specific Responsibilities of the Position:
 Civil and Mechanical system design decision making.
 Applying sound project design engineering principles.
 Ensure systems and equipment are designed and installed in accordance with Monsanto and regulatory standards.
 Assist with project reviews and system design.
 Review field installations to ensure compliance with design.
 Verification and completion of as-built drawings.
 Development construction drawings.
 Work directly with Project Engineers, Project Planners and Construction Field Coordinators to define project implementation requirements.
 Develop equipment and material take-off and specifications.
 Surveying and field verification as required to support project design.

Principal Duties and Responsibilities:
Develop site plans, equipment layouts, piping plans and isometrics 60%
Updating as-built drawings 30%
Assist Project Construction Coordinator as needed with construction activities 5%
Work with Project Planner to establish resources 5%

Education
Associate degree in Drafting/Design Technology or equivalent

Ideal Candidate Will Possess:
 Excellent MicroStation CADD operating skills.
 Surveying and field verification technique knowledge.
 Understanding of mechanical and civil design practices and regulations related to system design, equipment layout and Mechanical.
 In-depth knowledge of design codes, standards and regulations (i.e., OSHA, ADA, ASME, etc.) as may be applicable to civil and piping work.
 Previous manufacturing experience - particularly with process related equipment (i.e., pumps, piping and heat exchangers, etc.).
 Capable of working independently.

Description of Specific Work Conditions and Physical Requirements:
This position is in a manufacturing environment that requires:
 The ability to ascend and descend stairs on a periodic basis.
 Capable of lifting and carrying 40 lbs.
 The ability to access all areas of the plant.
 This position requires working the Muscatine Plant core business hours.
 Extended hours and weekend work required when needed to support plant activities.

Use of 3d Plant Design, Cadworx and Naviswork a plus.
 
Job Number: 73M
Job Location: Muscatine, IA
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Amy Kloeppinger
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / IPD Team Lead

Description:
Project Engineer / IPD Team Lead

Location: Windsor Locks, CT
Pay Rate: $48.25/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
Project Engineering Integrated Product Development (IPD) Team Lead will provide continuous support of environmental controls for the US Navy. The environmental controls include oxygen generation and CO2 removal for VIRGINIA, OHIO and COLUMBIA classes of submarines. The successful candidate will be working on the support of the qualification and production builds of our many different products. Additionally, the candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to drive delivery of these products within the approved budget and schedule. Familiarity with SAP, and UTAS Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and will play a critical role in driving project execution while meeting both internal and external customer expectations. This position requires creation and delivery of technical presentations to management and customers.

Additional:
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 5+ years leading teams and managing projects Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with product qualification, and production build and test (specifically with respect to low volume Navy hardware)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Experience troubleshooting (specifically with respect to MRB disposition) in troubleshooting problems on the production floor and coming up with creative solutions that maintain product quality while minimizing cost/schedule impact
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in regular reviews with the customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 9992
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineering Integrated Product Team (IPD) Lead

Description:
The ideal candidate will perform high complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, and tracking schedules.

The Project Engineering IPD Team Lead will manage a team and provide direction development, design, and testing of components for manned space applications. This will include extensive supplier technical management.

You will be working for one of the world’s largest suppliers of technologically advanced aerospace and defense products. The specific business unit creates products that reside in deep space, low earth orbit, undersea and on the ground and is a major supplier to the international space programs.

The Project Engineering IPD Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the program in Windsor Locks, CT.

The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components.

Familiarity with Earned Value Management System (EVMS), DOORS and SAP are a plus. The IPD Team Lead will report directly to the Program Engineering Manager and Program Managers and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. This position requires creation and delivery of technical presentations to management and customers.

Education / Certifications
•BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
•4+ years leading teams and managing projects

Experience/Qualifications
•Prior experience working with or managing multi-disciplinary teams in a fast-paced environment
•Excellent verbal, written and interpersonal communication skills
•Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations)
•Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
•Ability to bring team members together and work problems to resolution
•Ability to work independently and as part of a team
•Proven planning, adaptability, organizational and negotiation skills for effective team management
•Ability to anticipate project risks and build contingency plans
•Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
•Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
•Participate in weekly/monthly reviews with customer to communicate status of contracts and schedule.
•Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
•Develop and manage program schedules to drive on-time contract deliveries.
•Participate in contract proposals, including BOE and BOM estimates.
•Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
•Utilize Earned Value methodology to forecast program demands and track project completion.
•Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
•Project Management Professional (PMP) certification is a plus.

BS Degree and US Citizenship is required
 
Job Number: 1910096511
Job Location: Windsor Locks, CT
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
Project Manager

Windsor Locks, CT
$48.25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
Manage high complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Project Engineer to Manage a team and provides direction development, design, and testing of components, for manned space applications. This will included extensive supplier technical management. UTC Aerospace Systems (UTAS) is one of the world’s largest suppliers of technologically advanced aerospace and defense products. ISR & Space Systems is a business unit within UTAS and our products reside in deep space, low earth orbit, undersea and on the ground. We are also a major supplier to international space programs. The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support Systems on the International Space Station, including the space suit, and undersea in submarines. Project Engineering Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the EMI Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the EMU program in Windsor Locks, CT.

The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components. Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. This position requires creation and delivery of technical presentations to management and customers.

*Education / Certifications
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 4+ years leading teams and managing projects *Experience/Qualifications Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in weekly/monthly reviews with customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 10239
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Our client is looking for a Quality Assurance Engineer to work in Orlando, Florida! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
* Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
* Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
* Facilitate technical trade-offs and standardization that may lead to more economical procurement. Recommends design changes or process improvement to mitigate production issues.
* Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
* Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
* Works under only general direction.
* Independently determines and develops approach to solutions.
* Work is reviewed upon completion for adequacy in meeting objectives.
* Reports directly to the Lead Procurement Engineer and Procurement Engineering Manager.
* Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
* Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
* Compiles and analyzes statistical data to determine feasibility of buying products and to establish price objectives.
* Compiles information to keep informed on price trends and manufacturing processes.
* Confers with suppliers and analyzes suppliers' operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules.
* Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records.
* May prepare bid packages. Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.
* Works all market segment proposals with the Procurement Engineering Manager.
* The position is a tactical position driving strategy requiring the individual to execute with direct contact of product, suppliers, and customers.
* Analyze KPIs and data analytics to conduct supplier development efforts focusing on Master Production Scheduling, lean manufacturing, predictive risk, capacity planning/growth, inventory optimization, six sigma, and process maturity at supplier sites.

Mandatory Qualifications and Experience:
* Technical Engineering Degree or equivalent.
* Must have ability to obtain a security clearance.
* Relationship development with IPT, suppliers, and customers.
* A strong understanding of Geometric Dimensioning and Tolerancing (GD&T).
* Strong understanding of engineering requirements management.
* Experience with requirements management and flowdown to supplier.
* Must be able to identify and document supplier's quality deficiencies and ensure effective corrective action.
* Capable of performing root cause analysis and identifying solutions to complex problems. Understanding engineering drawings requirements mechanical and electrical inspection methods and design.
* A strong understanding of special processes and strong skill in managing and interfacing with suppliers daily to support the Program.
* Ability to focus on continual improvement practices using causal analysis tools to drive corrective and preventive actions
* Must have knowledge and understanding of critical design attributes and auditing/surveying capabilities.
* Intermediate to advanced Microsoft Excel skills.
* Knowledge of material cost estimating and subcontract estimates.
* Skilled with DCAA audit and fact-finding interface.
* Proficient with Cost Accounting Standards and FAR cost principles.

Desired Qualifications and Experience:
* SAP P2P and COS MRP; LM EPDM system; ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)
* Experience with working with suppliers and US Military customers in a dynamic environment
* Experience with performing First Article Inspections to AS9102 requirements
* Aircraft maintenance experience/knowledge and/or FAA A&P License and/or military Pilot/Loadmaster/Crew Chief experience
* Aircraft avionics and structure experience/knowledge
* Experience with source inspection and surveillance activities at suppliers to the SSOW
* Strong understanding in AS9100 and ISO 9001 Quality Management Systems
* Knowledge of Reduced Dimension Drawings and 3D Models
* Problem solving and time management skills at a highly refined level
* Skilled in supplier recovery and development activity with experience in Subtier Management, Cellular Manufacturing, 5S, equipment utilization rates, Kaizen events, Industrial Engineering, FIFO, Lean, Configuration Management, Change Control, Requirements Management and waste reduction

The ideal candidate for this position will possess the following skills and characteristics:
* Strong organizational skills and the ability to work in a dynamic environment.
* Must be able to multi-task, meet deadlines and to support all supplier quality field engineering activities.
* Strong communication skills (both oral and written) will be necessary to support the assignment and weekly reports.
* Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts Management Team and Customer Government Representatives
* High energy, self-starting, team player who achieves goals and delivers results.
* Presentation skills: PowerPoint, supporting documentation, verbal communication, facilitation, leadership.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129536
Job Location: Orlando, FL
Duration: 1 year
Start Date: 02/11/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotics Engineer

Description:
Strong and recent background in two of the following robots: FANUC, ABB, KUKA, or Comau

Creating code from scratch, performing advanced programming, and commissioning/installing Robotics and Vision systems. clients across different industries and environments.
Responsible for Robotics/Vision code development, code installation, debug on job site, and commissioning of the complete system.
Conducting the peripheral device programming, setting up various robotic communication protocols, coordinating the machine debug, power-up, and machine validation with build and electrical teams.
Ensuring that systems are designed and programmed to customer and/or DyAG build specifications using standard techniques and approaches.
 
Job Number: 45559
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Position Overview:

Designs, develops operates and maintains software components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.



Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products.



Developments real time embedded systems involving SW for digital signal processing, electronic warfare, and control and display components. Interfaces with customers, suppliers, application users and other technical and support personnel.



A Bachelor’s degree in Computer Science, Electrical Engineering, or related engineering field.   (MUST BE ABLE TO OBTAIN A SECURITY CLEARANCE)


  • 9+ Years of Embedded Software Engineering experience.

  • Real Time Operating Systems Experience.

  • Must have experience with C++ programming languages:(Either applicable. No preference) :

  • C++

  • EW Background • Capable of working on both high and low level software • VxWorks or similar embedded OS experience • UML design experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 18-49460
Job Location: Clifton, NJ
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-21 00:00:00.0
Start Date: 2018-12-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr I & E Designer (OK)

Description:
Looking for one instrument/electrical designer (Project Designer or Senior Designer), please send resumes to me at this email.

This designer needs 15 plus years of experience.

Primary Functions/Responsibilities:

Safety
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, ethical, honest, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, instr/elect detail design packages for projects.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Strong project and CAD experience.
(MicroStation experience a plus)

Strong Smart Plant Instrumentation
(SPI) would be a big plus (This is an instrument database that is widely used in the industry)

Must be a good communicator both verbally and written.
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player
Will be required to review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010619OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.


Sr. Technical Writer writes technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.

Sr Technical Writer has at least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications. Strong technical writing and communication skills are required. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired

Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years Technical Publications writing experience. Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments. Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include: Static structural analysis and Margin of Safety determination, fatigue and fracture mechanics analysis of critical interfaces, determination of airframe component replacement and / or retirement times, specification and design of airframe related static and fatigue tests, field support and formal engineering documentation.

Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience Required:
Minimum of 10 years experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills are required.

Software Experience: NASTRAN/PATRAN or equivalent FEM, Catia, MS Office applications.
 
Job Number: 46625
Job Location: Stratford, CT
Duration: 18 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer

Location: Windsor Locks, CT
Pay Rate: $62/hr
Duration: 6 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
We are looking for an enthusiastic and highly motivated individual to join us as a Systems Engineer to do support the verification & validation of Orion EM1 ECLSS and ATCS hardware.
Responsibilities include:
-understanding product requirements at the system/component level for mechanical/electrical hardware, supporting acceptance/qualification testing, creating verification reports.
-Associates must be able to work well both independently and within an integrated product development team (IPDT) environment.
-Bachelors required
- Excellent attention to detail
- Excellent writing & math skills
- Must be US Person

Additional Job Details:
Experience on hardware development program: -proposal/development/manufacture/verification/operational support
• Experience performing thermal/fluid/chemical analyses
• Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
• Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 9893
Job Location: Windsor Locks, CT
Rate: 62
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
The Technical Designer does structural design engineering work for the interiors of business aircraft. Examples include custom cabinetry such as galleys, lavatories, closets and other storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, avionics system support including retrofit and new installations, and seating (floorplan) reconfigurations. • Assist Lead and Primary engineers in accomplishing project tasks. • Research data, and assist in defining scope by proposal review, team meetings, coordination with Operations, data research and airplane survey. • Provide liaison to Operations personnel. • Determine to use existing data and/or new data needed to be created. • Coordinate with Product Support Electrical and Certification engineering. • Coordinate data delivery priorities and dates with Operations to meet needs. • Provide input to Work scope Change Requests. • Monitor and respond to Engineering Service Requests. Preferred candidates will possess the following characteristics: • Customer-service oriented to our internal customers - primarily Operations personnel. • Flexibility, adaptability and quick learning skills to meet our customers' needs. • Ability to perform and prioritize multiple assigned projects at the same time. • Knowledge and experience with AutoCAD, Catia v5 and SmarTeam.

Education and Experience Requirements:
Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years related experience. Working knowledge of computer-aided design systems and personal computing systems. Working knowledge of engineering, engineering procedures and design drawing standards.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Traveling Field Service Representatives

Description:
STS Technical Services is hiring Traveling Field Service Representatives to join the largest military vehicle upgrade project in US history, the Joint Light Tactical Vehicle- JLTV!

You will be trained in Oshkosh, WI and then be deployed to several site locations all over the United States and abroad.

Overall, C4I personnel will integrate: turret drive systems, DVE, DAGR, LRAS, VSWR Antenna, KVG-72, VRC 104 – 114, VRC-9x, VIC.

This is a tremendous opportunity to work for a company that holds industry leading standards for defense and also is on the leading edge of an industry boom. There is only one place you will gain the training you need on the JLTV and this is the job to do it.

Essential Duties and Responsibilities:

Provide field support to military customers within assigned regions
Travel as required, up to 100% annually
The ability to travel consistently is a high requirement for this position
Hardware and software hands-on subject matter expertise in the areas of GFE and OSK CFE systems that include weapons, shelters, and C4ISR/EW (incl. COMSEC, sensors, JBC-P software, GFE firmware/configuration)
Installation, de-installation, configuration, operation, and verification of GFE and OSK CFE systems to demonstrate operational readiness (IAW the JPO prove-out process)
Independently perform troubleshooting to identify and resolve technical issues of JLTV CFE and GFE OSK installation kits
Provide specialized tools necessary to perform the duties (OSK laptops with full CAD data (incl. wiring diagrams), antenna VSWR meter, amplifier power meter, and cable analyzer)
Operate JPO provided hard drive duplicator to perform CSDU HD cloning
Provide status updates to Government site lead as directed
Document and track vehicle (incl. CFE and GFE kit) status and issues

Qualifications:

CompTIA Sec+ certification (Mandatory)
Army MOS 25U or other service branch equivalent (covers all radio experience and training)
Adjudicated Secret Clearance
Physical ability to work in field conditions indefinitely
Electronically controlled electrical system experience preferred
Strong schematic experience
Electrical diagnostic experience
CAD model operator experience

We know it takes great people to do great work, so if you’re interested in joining the STS Technical Services family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45021
Job Location: Oshkosh, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search