Job Search Results

218 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:28PM Pacific Time by ContractJobHunter. )

Listings 1 - 218

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electrical Systems Engineers

Description:
STS Technical Services is hiring Aerospace Electrical Systems Engineers in Oklahoma City, Oklahoma.

Job Duties:
Responsible for design, analysis, and substantiation of STC projects for Air Transport Aircraft
The Electrical Engineer will work under the direction of a more Senior Design Engineer
Engineer will work on green aircraft and aircraft systems such as GPS, TCAS, ATC, ADS-B, SATCOM, Radar, and EO/IR, and their associated controllers, annunciators and antennas
Work location is at the Oklahoma City airport
Essential Qualifications:
2-5 years of experience
Knowledge of general aircraft structural drawings
Construction of Block Diagrams, Wiring Diagrams, Wire Routing Diagrams, STC kit Manufacturing Diagrams in AutoCAD or similar CAD systems
Performing Surveys of customer aircraft to determine design requirements
US Citizenship
Preferred Qualifications:
Knowledge of ATA Drawing & Document Standards
Knowledge of 14 CFR Part 25 Aircraft architecture
Knowledge of industry standards, connectors, accessories and bus logic/ levels
Knowledge of FAA STC Certification process
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34566
Job Location: Oklahoma City, OK
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Design Engineer - Solidworks

Description:
Position Summary:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes.

• Must have Aircraft Interior Completions experience.
• Must have a strong background utilizing Solidworks
• Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
• Must have 3D modeling experience in Solidworks

The Structures Company is an AA/EOE.
 
Job Location: Indianapolis, IN
Rate: $50-57/hr
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance & Repair (Electronic Systems)

Description:
The ideal candidate will perform maintenance of flight test instrumentation for flight test programs.
They must be able to read and understand technical drawings, basic electronic wiring practices, basic electronic systems operations, and mechanical assembly of electronic components.
This is an FAA Safety Sensitive Role.
 
Job Number: 2010113863
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Performs advanced, specialized or prototype production assembly operations on structural parts, mechanical assemblies and subassemblies using automated assembly operations. May provide assembly operation guidance to other assemblers.
 
Job Number: Mechanic_TX
Job Location: San Antonio, TX
Rate: DOE
Per Diem: Possible
Overtime: Yes
Duration: 7 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Stress Engineer – Fort Worth, TX

Description:
Airframe Stress Engineer – Fort Worth, TX

Job Summary:

Cyient is seeking an Airframe Stress Engineer for a full time, direct hire opportunity based in Fort Worth, TX. This position includes benefits and a relocation bonus if need be. Qualified candidates must have 5+ years of Aerospace Stress Engineering experience, 3000+ hours of experience with CATIA and experience with ANSYS, and NASTRAN / PATRAN.

Responsibilities:

• Conduct complex stress analysis for metallic / composite components of tiltrotor rotor and airframe structures and prepare reports
• Develop analysis packages and complete static stress reports for review and release in ENOVIA.
• Performs diverse and complex product development, modification, and evaluation of components, by applying engineering principles and developing new or unique stress analysis tools/ methods as required.
• Applies scientific analysis and mathematical models to predict and measure the outcome and consequence of design, in terms of stress, strength, life, and alternatives.
• Utilizes and interprets predictive models to simulate and verify design concepts. Perform static analysis using industry standard calculations methods (i.e. Bruhn, Roark, Flabel, and O.E.M. structures manuals)
• Investigates design factors such as function, materials, performance, interchangeability, weight and stress & strength requirements.
• Conduct Analysis for damage limits and tolerances for various rotor and airframe structural components.
• Contributes to the completion milestones associated with specific projects (completion of stress analysis and reporting of results).
• Methods include the use of ANSYS, NASTRAN / PATRAN and a balance of classical hand calculations to analyze high performance rotor and airframe structures.

Skills:

• High level of proficiency with ANSYS, and NASTRAN / PATRAN is a requirement
• Experience in Aerospace stress analysis is required
• Experience with CATIA is required
• Must have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint).
• Good oral and written communication skills

Education: BS/MS in Mechanical, Aerospace Engineering, Math or related science degree required
Years of Experience: Aircraft – Structural/rotor stress analysis Preferred (5+ years required)

Citizenship: US Citizen
 
Job Number: R-01699
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Kenin Fenster
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Certification Engineer - Norther California

Description:
About the Job
Our client is looking for engineers experienced with civil aviation certification to join our growing team. This role will serve as an internal Subject Matter Expert as well as a primary external point of contact with regulatory agencies and industry standards groups for aircraft, system, and equipment-level aspects of avionics and electrical systems and equipment.

Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits at job site are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.
 
Job Number: t3255
Job Location: CA
Rate: Open
Duration: Direct
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - Avionics and Electrical

Description:
Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 379
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Materials Testing Technician

Description:
Composite Materials Testing Technician


Cyient is seeking a Materials Testing Technician for a full time, direct hire opportunity based in Fort Worth, TX. This position includes benefits and a relocation bonus if need be. Qualified candidates must have experience testing composite materials (non-metallic) such as graphite epoxy, glass, etc. We are also looking for testing experience with INSTRON or MTS machine and a degree or related certification.

This technician will be responsible for the manufacturing and assembly of products. Ensuring that the proper ingredients and appropriate quantities are used through weighing, measuring, and checking the raw ingredients. Operates production equipment. Keeps records and maintains clean room environment to comply with regulatory requirements, good manufacturing practices, and standard operating procedures. May help with in-process testing to determine if batches meet specifications. Assignments are moderately complex in nature and judgment is required in addressing problems and making routine recommendations.

Primary Responsibilities:

• Operate Hydraulic Test Frames with electronic data acquisition systems to conduct both static and fatigue tests per company and / or industry standards
• Work with extensometers and strain gages to record data during testing
• Maintain computerized test routines for all test frames
• Write modified test routines when necessary (both static and fatigue)
• Ensure proper data transfer from test frames to engineering networks
• Perform minor maintenance on test frames when needed
• Work with maintenance organization to establish and maintain preventive maintenance plan for all test equipment , chambers, (heat blankets, nitrogen lines, etc)
• Work with engineers to determine best test methods for non-standard -parts and /or applications
• Work with Lab coordinator to develop and maintain test schedules

Secondary Responsibilities (To have familiarity with , but use only occasionally)

• Prepreg laying up, bagging, and curing of composite and metal bonded panels, including setting up and running an autoclave
• Adhesive bonding with both paste and film adhesives, apply primer
• Conduct of destructive testing and evaluation of various production aircraft components and write summary technical reports of the findings and conclusions
• Leading mini-projects (test requests) through all stages of completion, interfacing with the customer when needed
• Able to read and interpret computerized drawings and parts lists

Qualifications

• Associates Degree in Engineering, engineering technology, materials science, Manufacturing Technology, Mechanical engineering or commensurate advanced technical training, experience and or/certification

Experience

• 3+ years working experience in materials lab or similar facility experience
• Possess a mechanical aptitude, able to with hands
• Possess very good computer skills and the ability to understand and write computer programs
• Possess very good communication and problem solving skills
• Ability to work well with internal and external customers on their test needs
• Some exposure to servo hydraulic test frames , construction, maintenance and operations thereof (machines such as Instron* machines, MTS* testing machines etc used for Composites test labs) (* Trade marks)

Citizenship: US Citizenship required
 
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Kenin Fenster
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Perform preliminary and detail design of composite airframe structures, structure layout and design for manufacturability.
Experience designing composite primary aircraft structures utilizing Catia v5 is a MUST.
CPD/Composites Workbench experience is a huge plus.
Fibersim is acceptable if no CPD experience.
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $65-75/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Lab Technician Fort Worth, TX

Description:
Composites Lab Technician JR-015463


Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Composites Lab Technician
Responsibilities:

• Laying up, bagging, and curing of composite and metal bonded panels; including setting up and running an autoclave.
• Machining, drilling, trimming and end tabbing of composite test specimens.
• Adhesive bonding with both paste and film adhesives, apply primers.
• Setting up and performing mechanical tests on various test coupon configurations; mechanical testing to include both static and fatigue tests, with and without strain gauges and/or extensometers, over wide range of temperatures.
• Conducting Destructive Testing & Evaluation of various production aircraft components and write summary technical report of the findings and conclusions.
• Leading mini projects (Test Requests) through all stages to completion; interfacing with the customer when needed.
Education:
• Associates Degree in Engineering, Engineering Technology, Materials Science, Manufacturing Technology, Mechanical Engineering or commensurate training and certification.
Experience:
• Possess a mechanical aptitude
• Technical knowledge of the use and application of adhesives, sealants, primers and composites.
• Ability to perform composite layup, bagging and curing, machining, bonding, including the ability to run an autoclave.
• Ability to use all equipment commonly used for composite specimen preparation (oven, grinder, drill press, cutting machine, band saws, platen press, etc.)
• Possess working knowledge of mechanical testing using automated equipment and data acquisition systems.
• Possess above average level of technical writing abilities and demonstrate ability to use advanced computer software tools.
• Be able to read and interpret material and process specifications computerized drawings and associated parts lists.

Citizenship: US Citizenship required

Skills & Experience
Autoclaves, Composites Manufacturing, Composites Testing And Evaluation - Properties
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Composites-Lab-Technician_JR-015463
 
Job Number: JR-015463
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager / Test Aircraft Manager

Description:
The Configuration / Test Aircraft Manager is responsible for managing test aircraft by prioritizing, documenting and controlling all configuration changes, maintenance or inspection requirements, technical directives compliance, parts removals/installs, and engine or sub-system modifications.

The successful candidate will be assigned to the CRH Flight Test Program in West Palm Beach and Fort Walton Beach, Florida. Note: could be 1st or 2nd shift.

Job Requirements:
• Manage the configuration of the test aircraft ensuring all configuration changes are documented in the appropriate system/tool.
• Provide direction and work instructions for Operations to complete the work on the aircraft.
• Coordinate with the various departments e.g. Test Director, Operations, Pilots, Safety, etc. to ensure aircraft is configured and ready to test.
• Support and implement process improvements within the aircraft management department and the site.

Educational Requirements:
• Bachelors’ degree from an accredited college in a related discipline with 3 years of professional experience, or equivalent experience/combined education.
• Masters’ degree from an accredited college in a related discipline 2 years of professional experience.
• Considered career, or journey, level.

Skills/Experience Required:
• Candidate must be a high performer
• Previous aviation/helicopter flight line experience
• Must be customer focused and a team player
• Must be self-motivated and goal oriented
• Must possess excellent verbal & written communication skills for use at all levels of the organization such as employees, management and internal/external customers
• Proficient in Microsoft products specifically Excel and Project

Additional Information:
• The assignment will be on 1st shift.
• Must be a US citizen.
• Must currently have and/or be capable of obtaining a security clearance.
• Must have valid driver's license/vehicle insurance to drive on base.
 
Job Number: 2010111152
Job Location: West Palm Beach, FL
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer

Description:
Tasks include analysis and testing of aircraft handling qualities, design of control laws, and development of simulation math models. This engineer will perform analysis and evaluation of total air vehicle stability and control characteristics to ensure acceptable handling qualities in compliance with specifications; apply control theory to the design of control laws that achieve desired characteristics for dynamic control response, gust or disturbance rejection, system failure robustness, and loads considerations; develop and validate both linear and nonlinear mathematical models of air vehicle and subsystem dynamics; and will use simulation and flight testing, including planning, data analysis and interpretation of test logs, to define handling qualities.
Qualifications
• B.S. + 3 years of experience, or M.S. in mechanical engineering, electrical engineering, aerospace engineering, computer science, or a related field
• Knowledge of aircraft flying qualities, flight dynamics, piloting control strategies, and flight control systems
• Proficiency in C/C++ desired
• Proficiency with MATLAB/Simulink desired
• Digital signal processing and controls education and/or experience desired




The Structures Company is an AA/EOE.
 
Job Number: 384
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.
 
Job Number: t3262
Job Location: Southern, CA
Rate: $55-$70/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Secret Clearance

Description:
Job Title Electrical Design Engineer Secret Clearance
Location Lexington, KY
Job Number 433/1927
Residency US Citizens Only
Clearance Interim Secret
Duration 1 Year or more
Pay Rate $35-48/hr
Per diem Yes split available
Overtime Unknown details at interview
Shifts Every other Friday off (9x80 shift)


We are hiring for an Electrical Engineer who will be working on changing and modifying existing aerospace avionics hardware, as well as integrating existing and new components into airborne or terrestrial equipment or systems.



Candidate will be working on developing military specification (SAE, ANSI, ASME) components / system designs based on requirements and interface control documents. After design work is complete, candidate will assist in supporting the fabrication, installation, and integration of the design, helping the manufacturing and installation contractors.



Required:

*3-5 years in Electrical Engineering, creating electrical designs.

*System integration experience.

*Active Interim or Secret Clearance; US Citizens only please.

*BSEE from an accredited University.



Pluses:

*Creating electrical designs of aerospace systems, wiring harnesses, components or other electrical equipment design.

*Familiar with Aircraft systems (like LRUs)



Benefits:
*Five medical plans to choose from
*Optical and dental plan offerings
*Direct deposit payroll
*Overtime paid at time and 1/2 over 40 hours
*Per diem may be available for out of town contractors
 
Job Number: 433
Job Location: Lexington, KY
Rate: $35-$48 DOE
Per Diem: yes/split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Powertrain & Electronics

Description:
Seeking a talented electrical engineer to join our team designing all-electric aircraft. This engineer will work closely with mechanical, software, and other cross-functional teams. You'll be taking ownership of key electrical subsystems and printed-circuit-boards from design through prototyping and to product. This is a hands-on position. Optimizing designs for reliability, weight, and efficiency will be a focus.

Responsibilities:
• Create clear and readable schematics for digital and mixed-signal printed-circuit-boards
• Component selection for minimum mass and maximum reliability
• Investigate modern technologies for power and data transmission/management
• Work with PCB designers to create reliable and low-weight layouts
• Write requirements, participate in DFMEAs + create and carry out test and validation plans

Required:
• Strong EE fundamentals, including familiarity with:
• Power conversion (linear and switching regulators)
• High-speed digital design and layout
• Signal conditioning and conversion (ADCs, filters)
• Discrete semiconductor design (FETs, BJTs, Diodes)
• Schematic capture and PCB design
• Experience with component selection
• Hands-on experience with building and debugging hardware
• Great communication skills
• B.S. in electrical engineering or related discipline

Desired Experience:
• M.S./Ph.D. in relevant discipline
• 2+ years of working experience in relevant industry
• Familiarity with Altium Designer
• High voltage electrical design (400V+)
• Exposure to regulatory certification
• Design-for-reliability, including use of DFMEA and fault trees
• Designing for high EMI environments



The Structures Company is an AA/EOE.
 
Job Number: 381
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Power Systems Design

Description:
Seeking a Mid-Level Electrical Engineer – Power Systems Designs to be part of the team responsible for the design, development, production, integration and life cycle support of power systems for embedded system electronics to include products used aboard Navy submarines, ships, and aircraft. This group designs, develops, demonstrates, produces, assembles, tests and delivers torpedo SONAR arrays and electronic assemblies.

Electrical Engineering (Mid-Level) - Power Systems Designs Duties:

Design, simulate and implement power solutions for embedded system electronics
Perform component and architecture trade studies to determine optimal system solutions
Document and present trade studies, analyses, test results, status, etc. to the team
Generate design and interface documentation
Integrate, test, troubleshoot, and verify hardware
Develop test criteria and assist in the design of test systems including test software applications
Develop technical presentations, recommendations, and written communications to explain technical issues to program management and the Navy customer team.
Electrical Engineering (Mid-Level) - Power Systems Designs Requirements:

Possess technical acumen, an educational background and expertise in AC-DC and DC-DC power systems design, development and troubleshooting:
Requires strong documentation and writing skills; to include strong written and oral communication skills
Be able to rapidly adapt to handling electronic system technical issues found in system integration labs, field environments and during production
Consistently develop knowledge/expertise across the various tactical baselines and platforms.
Knowledge of systems and electronics troubleshooting skills.
Electrical Engineering (Mid-Level) - Power Systems Designs Education:

B.S. (or higher) degree in Electrical Engineering or related technical field
2-5 years of engineering experience required


This position requires the applicant to obtain and maintain a DoD Clearance.
 
Job Number: 8562
Job Location: Pittsburgh, PA
Rate: Open
Per Diem: Possible
Overtime: Unknown
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Nichole Andrews
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical systems through all phases of a project, including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Support of production, in-service and flight test activities
• Preparation and presentation of technical data in design reviews
• Preparation and presentation of change requests
• Review and approval of Qualification Test Plans, Procedures and Reports
• Provide support as required in the maintenance and update of the Electrical Test Laboratory
• Provide support as required in other areas of the Electrical Systems group, including cockpit controls and exterior/interior lighting
Qualifications

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical Engineering from an accredited four year college or university program
• 8 years directly related experience involving design, development and certification of aircraft electrical power systems

Knowledge, Skills and Abilities:
• Knowledge of FAR Part 23 or 25 regulations
• Knowledge of advanced electrical power distribution systems preferred
• Knowledge of aircraft communication busses
• Knowledge of RTCA/DO-160, RTCA/DO-178B and RTCA/DO-254 processes
• Knowledge of aircraft wiring practices
Knowledge of aircraft bonding and grounding practices
Knowledge of system modeling tools preferred

The Structures Company is an AA/EOE.
 
Job Number: 372
Job Location: CA
Rate: $65+/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
This position involves architecture and implementation of the embedded software at the heart aircraft. The engineer will play a key role in a small, fast-moving team and have input to conceptual system design and implementation of embedded software for control of electric-powered, fly-by-wire aircraft.

Required
• University degree in electrical engineering, computer science, computer engineering, mechatronics, physics, mathematics, or similar field; or, a very strong portfolio of designed and implemented embedded software.
• Master's degree or Ph.D. preferred.
• Expert knowledge of object-oriented programming methodology and multi-layered system architectures.
• Expert knowledge of C++.
• Knowledge of and experience with real-time operating systems.
• Knowledge of and experience with communication protocols including I2C, CAN, SPI, UART, etc.
• Strong understanding of modern micro-controller and microprocessor architectures such as ARM Cortex-M0/M3/M4/A8/A9.
• Understanding of hardware from an embedded software engineer's perspective.
• Experience with modern integrated development environments and debuggers.
• Hands-on experience with test and measurement equipment such as oscilloscopes, logic analyzers, protocol analyzers, voltmeters, etc.


The Structures Company is an AA/EOE.
 
Job Number: 387
Job Location: Northern CA
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Ground Test / Structural Laboratory Technicians (1st & 2nd shift)

Description:
The Engineering Ground Test / Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
• Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
• Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
• Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
• Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
• Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: Yes
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
The Systems Engineer, Flight Controls will be responsible for some or all systems related to:
• System 22 – Automatic Flight
• System 27 – Flight Controls
• System 76 – Engine Controls
• System 86 – Lift Systems

Responsibilities
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements.
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities.
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects.
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements.
• Generate, review, and approve:
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required.

Required
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications.
• Previous experience with aircraft systems.
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A.
• Working knowledge of DO-160G environmental qualification.
• Excellent problem solving, communication, and technical writing skills.
• Basic knowledge of FAA regulations and guidance material and industry standards.
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred.
• Proficient in English.
• Proficient with Microsoft Office and Google Docs.

Desired
• Working knowledge of electro-mechanical equipment design, including software.
• Previous experience managing complex sets of requirements.
• Previous experience preparing and presenting design reviews for complex, highly integrated systems.
• Previous experience defining system controls, crew indications, and flight manual procedures.
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results.
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred.
• Experience and involvement with industry groups to develop consensus standards.
• 5+ years of relevant industry experience.
• Private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 377
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Framework and Simulation Software Engineer

Description:
This engineer will play a key role in a small, fast-moving team and participate in architecture design and implementation for our electric-powered, fly-by-wire aircraft. This engineer will work closely with the hardware, mechanical, integration, and flight testing teams to design, develop, test and improve system-level behaviors.

Specifically this role has an emphasis on core framework code and flight simulation.

Qualifications
• University degree in computer science or computer engineering
• At least 2 years full time industry experience
• Expert knowledge of object-oriented programming methodology and multi-layered system architectures
• Expert knowledge of C++
• Expert knowledge of multi-threaded systems
• Experience with modern integrated development environments and debuggers
• Basic understanding of version control technologies
• Exposure to other languages such as: python, C#, C, SQL

Desired Attributes
• Positive attitude
• Willingness to be flexible and learn new technologies
• Ability to work inside team



The Structures Company is an AA/EOE.
 
Job Number: 388
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Certification Engineer

Description:
The Human Factors Certification Engineer will be the focal for concept development and validation, systems integration, and certification activities related to Human Factors aspects of the aircraft design. This role will serve as the internal Subject Matter Expert as well as the primary external point of contact with regulatory agencies, industry standards groups, and suppliers for Human Factors considerations. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well. It is preferred that this individual be an FAA DER or candidate.

Responsibilities
This position will be responsible for:
• Working with multiple engineering and pilot teams to
• Establish design philosophies and strategies for Human Factors considerations, including Simplified Vehicle Operations
• Execute design development activities for Human Factors, including mock-ups, simulators, and user feedback studies
• Lead certification planning for Human Factors considerations
• Convey requirements in a way that clearly breaks down the product objectives, regulations, and guidance material into specific and verifiable requirements
• Review designs, develop solutions, and ensure compliance with company objectives and airworthiness standards
• Determining and interpreting the certification basis and establishing the compliance strategy – including means and methods of compliance
• Developing, reviewing, and approving certification-related documents, including
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order demonstrate applicable design show compliance with airworthiness standards
• Interfacing with certification authorities as required (FAA, EASA, etc.)
• Mentoring junior engineers

Required Skills and Experience
This position requires candidate to have or be:
• An expert level understanding of design standards and verification methods for Human Factors aspects of airplanes and helicopters
• Previous experience with Human Factors aspects of aircraft development
• Previous FAA certification experience
• Working knowledge of 14 CFR Part 23 regulations and guidance material
• The ability to question assumptions in regulations, guidance material, and engineering specifications
• The ability to read, review, and create engineering specifications and drawings
• At least 10 years of relevant aviation or aerospace industry experience
• A Bachelor’s of Science in an applicable engineering discipline
• Proficient in English
• Proficient with Microsoft Office products

Desired Skills and Experience
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER)
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred
• A private pilot certificate, advanced ratings preferred
• Experience using a variety of avionics and flight control systems
• Experience in testing planning, execution, and reporting
• Experience and involvement with industry groups to develop consensus standards
• Familiar with Dassault Systems engineering and management tools





The Structures Company is an AA/EOE.
 
Job Number: 382
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Stress/Structures Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) has opportunities for experienced aircraft MRB Stress/Structural Engineers. The Engineers will perform MRB repairs with substantiation and stress analysis to support US DoD projects. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Provide liaison/MRB engineering assistance in support of DoD platforms
• Physically inspect aircraft nonconforming structure and provide repair guidance to artisans
• Create reports that demonstrate all relevant design requirements have been satisfied
• Develop repairs and prepare static strength/fatigue analysis of engineering repair dispositions for nonconforming aircraft structure
• Implement creativity and flexibility in daily activities by relying on experience and judgement to plan and accomplish goals
• Assist less experienced engineers through technical direction and oversight

Requirements:
• 5+ years of work experience as a liaison, MRB stress, or stress engineer
• Bachelor’s or master’s degree in Engineering
o Mechanical or Aerospace preferred
• Established knowledge of aircraft static strength analysis methods
• Experience with maintenance and repair practices used in the aerospace industry
• Effective communication skills
• Self-motivated and able to work independently

Preferred Qualifications:
• 10+ years of experience in MRB Stress
• Experience with NAVAIR engineering and reporting procedures

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 557
Job Location: Orange Park, FL
Rate: DOE
Per Diem: None
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Mechanisms

Description:
The Engineer will be designing mechanisms, rotor hubs, actuators, gear boxes, drive systems, etc. All of the design work will revolve around moving parts and mechanisms. This person must also have lead experience and be comfortable in a lead role.

Seeking an experienced design engineer to take ownership of structural analysis of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes rotor blade retention components, mechanical control systems, electro-mechanical actuators, transmissions, and electric motors/shafting. Define key requirements and take ownership of them through the design life-cycle.
Do: The Mechanical Design Engineer will also take the lead designing a myriad of critical components and primary structure. Areas of focus include propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include the relevant design artifacts (specifications, interface drawings, layout drawings, datum files and CAD assemblies, tolerance stack-ups, detailed drawings, etc). The ideal candidate will be highly versed in 3D CAD (Dassault 3DExperience preferred) and will also be responsible for conducting sizing of the components he or she develops. This will require working knowledge of aerospace sizing methodologies and experience running finite element models. In addition, the role will require the mechanical design engineer to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Bachelor’s degree from an accredited university in mechanical/aerospace engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one); or master’s degree from an accredited university and at least 3 years of professional experience or equivalent experience/combined education.
• Excellent mechanical aptitude and analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar and generating detailed drawings, which are in accordance with ASME Y14.5-2009 standards.
• Familiar with finite element analytical tools such as Hyper-Mesh pre-processors integrated with Optistruct or Nastran, ANSYS or similar.
• Deep knowledge of common aerospace materials and standard hardware selection is a must. Experience with light weight structures and composites is also highly advantageous.
• Experience designing critical structural components, which have been sized for static strength, stiffness, fatigue, or a combination thereof. Knowledge of kinematics is also desired.
• Experience supporting ground and flight testing of complex systems as well as running sub-scale proof of concept testing such as coupon programs or prototype test rigs.
• Versed in gear and bearing design as well as lubrication systems, and the design of common housing features such as lugs and bolted joints.
• Familiarity with component and sub-system FAA certification testing is a plus.
• Past experience as a design supervisor, or leading a team and/or mentoring others, formally or informally is an advantage.



The Structures Company is an AA/EOE.
 
Job Number: 400
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Sub-Systems Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time experienced mechanical systems engineers to support DoD aircraft platforms. The engineers will assist in the design, execution, and troubleshooting of mechanical systems and modifications on a variety of DoD aircraft platforms. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Develop detailed solutions for technical, operational, and maintenance problems
• Assist maintenance in troubleshooting
-the rigging of aircraft control systems
-aircraft hydraulic repairs and malfunctions
-aircraft fire detection and suppression system repairs and malfunctions
-aircraft fuel system repairs and malfunctions
-aircraft pressurization system repairs and malfunctions
• Present to management or team
• Ensure repairs are compliant with approved naval aviation maintenance policies
• Perform engineering investigations of failed aircraft components and systems
• Provide disposition for obsolete aircraft system components
• Determine criticality of aircraft system components by performing failure mode effects and criticality analysis
• Review technical publication deficiency reports and update publications where necessary
• Ensure aircraft operates properly and safely
• Draw and read blueprints and give material estimates and time required for repairs
• Determine airworthiness of aircraft
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the mechanical engineering discipline
• Review and prepare engineering and technical analyses, reports, and other technical documentation
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Aerospace, Aerodynamics, Mechanical or Electrical Engineering from an accredited college or university
• At least 3 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Familiarity with the troubleshooting and integration of test equipment, electrical/power, air conditioning, cabin pressure, hydraulics, and mechanical systems in aircraft
• Experience in reading, creating, and editing drawings in AutoCAD (or similar CAD program) and work instructions in Microsoft Office and Adobe Acrobat products
• Experience in prototyping and validating installations
• Ability to use Microsoft Office Suite (Excel, Word, Outlook, PowerPoint)
• Effective communication and interpersonal skills

Preferred Qualifications:
• 5-10 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Self-motivator capable of working through problems on own

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 513
Job Location: Orange Park, FL
Rate: DOE
Per Diem: None
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Navigation Systems Engineer

Description:
The Systems Engineer, Navigation will be responsible for some or all systems related to:
• System 34 – Navigation
• System 92 – Radar
• System 93 – Surveillance

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working kndge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 378
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Metallic Materials Lab Technician - Mech. Testing, Fort Worth, TX

Description:
JR-015460

Non-Metallic Materials Lab Technician - Mech. Testing

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description JR-015460

Non-Metallic Materials Lab Technician - Mech. Testing

Primary Responsibilities:
• Operate Hydraulic Test Frames with electronic data acquisition systems to conduct both static and fatigue tests per company and / or industry standards
• Work with extensometers and strain gages to record data during testing
• Maintain computerized test routines for all test frames
• Write modified test routines when necessary (both static and fatigue)
• Ensure proper data transfer from test frames to engineering networks
• Perform minor maintenance on test frames when needed
• Work with maintenance organization to establish and maintain preventive maintenance plan for all test equipment , chambers, (heat blankets, nitrogen lines, etc)
• Work with engineers to determine best test methods for non-standard -parts and /or applications
• Work with Lab coordinator to develop and maintain test schedules

Secondary Responsibilities (To have familiarity with , but use only occasionally)
• Prepreg laying up, bagging, and curing of composite and metal bonded panels, including setting up and running an autoclave
• Adhesive bonding with both paste and film adhesives, apply primer
• Conduct of destructive testing and evaluation of various production aircraft components and write summary technical reports of the findings and conclusions
• Leading mini-projects (test requests) through all stages of completion, interfacing with the customer when needed
• Able to read and interpret computerized drawings and parts lists

Qualifications
• Associates Degree in Engineering, engineering technology, materials science, Manufacturing Technology, Mechanical engineering or commensurate advanced technical training, experience and or/certification

Experience
• 3 to 5 years working experience in materials lab or similar facility experience
• Possess a mechanical aptitude, able to with hands
• Possess very good computer skills and the ability to understand and write computer programs
• Possess very good communication and problem solving skills
• Ability to work well with internal and external customers on their test needs
• Some exposure to servo hydraulic test frames , construction, maintenance and operations thereof (machines such as Instron* machines, MTS* testing machines etc used for Composites test labs) (* Trade marks)

Citizenship: US Citizenship required

Skills & Experience
Composite Materials, Composites Testing, Universal Testing Machines
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/careers/0/refreshFacet/318c8bb6f553100021d223d9780d30be
 
Job Number: JR-015460
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
OpenGL Graphics Software Engineer

Description:
Seeking a skilled software engineer to join our team, working to create a fully electric VTOL aircraft. This individual is a generalist (with C++/OpenGL experience), but will initially concentrate on display software running in the cockpit of our aircraft.

Responsibilities
• Designing and implementing the safety critical primary flight and multi-functional displays used in aircraft
• Gathering requirements from our test pilots and engineers

Required:
• Expert knowledge of object-oriented programming methodology and multi-layered system architectures
• Expert knowledge of C++
• Expert knowledge of OpenGL
• Knowledge of and experience with real-time operating systems and embedded systems
• Experience with modern integrated development environments and debuggers
• Experienced in continuous integration pipelines: build, test, and report
• Experience with version control tools such as Git
• Open mind, with willingness to learn to new techniques and technologies

Desired Experience
• University degree in computer science, computer engineering, physics, mathematics, or similar field; or, a very strong portfolio of designed and implemented applicable software
• 3+ years of experience working in a related/relevant industry
• Video game and graphics design or experience designing aircraft primary flight displays
• Piloting aircraft, avionics hardware, electric cars or similar systems
• Understanding of DO-178C or safety critical software



The Structures Company is an AA/EOE.
 
Job Number: 389
Job Location: Northern CA
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
A Design and Reliability Engineer job is currently available in Shelton, CT through Belcan at one of our key aerospace customers. In this contract role, you will support projects ensuring that designs are sufficiently robust to satisfy customer needs; ensuring equipment is life cycle cost-effective without sacrificing operator, maintainer, or system safety.To be considered you will have a BA/BS and three plus years of experience with fault tree analysis.

Design and Reliability Engineer Job duties:
* Supports and manage projects ensuring that designs are sufficiently robust to satisfy customers needs for equipment.
* Manage cost effectiveness without sacrificing system safety.
* Responsible for supporting the US Army Future Long-Range Assault Aircraft (FLRAA) Program
* Perform reliability modeling, analyses and FMECA and incorporate relevant information into fault trees.

Schedule
* 1st Shift: 9/80A

Qualifications:
* BA/BS and at least three years of working experience analyzing aviation/aerospace systems.
* Must be a fluent user of PTC Windchill WQS Fault Tree (Formerly known as Relex).
* Must be able to interface with designers, ascertain and formulate fault tree logic, create fault trees, and verify the logic and results with the design community.
* Some experience using 3DX to view and interpret drawings.
* Familiarity using Isograph Reliability Workbench FaultTree+ is desired

If you are interested in this Design and Reliability Engineer job in Shelton, CT, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 300980
Job Location: Shelton, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Aerodynamicist

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
 
Job Number: t3260
Job Location: Southern, CA
Rate: $70-$90/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Engineer ( Clearfield, Utah ) S9778040

Description:
Senior Principal Engineer ( Clearfield, Utah ) S9778040
12 Month Contract

Pay Rate: Open

Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9778040
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Engineer -Test

Description:
Seeking a Software Development Engineer in Test to verify the software that runs on all of our aircraft sub-systems to provide services such as flight control, battery management, navigation system, etc.

You should be able to work with software verification engineers to translate written test specifications into reliable automated tests that will be executed by continuous integration systems, to provide build quality data which may also be used for certification. In addition, you should feel comfortable formulating test strategies and test design methodology that you and other engineers can leverage to develop automated testing tools. In the software team, the activities of verifying the software and automating tests for that purpose, receive equal status to those that are developing the code itself. Software testing will be taking center stage as we move towards certification. With Safety as our primary goal, this software must be tested to the highest possible standards. The test framework needs to be just as solid, and well documented, as the certified code we will release for the vehicle.

You'll quickly find yourself owning automation projects and contributing to many others, as part of a team of supportive and dedicated software development engineers. As such you will need to be self-motivated, disciplined and confident representing the software team to the company.

Responsibilities
• Contribute to the build verification tests running in CI and work with DevOps to keep them maintained and reliable at all times.
• Analyze test results, including graphical and mathematical analyses when necessary, and interpret those results for technical and non-technical stakeholders.
• Research new features and identify test automation strategies and requirements, then work individually or with the team to deliver a working automated solution e.g a suite of automated tests, a testing tool, a framework or API.
• Contribute to and encourage use of the team's automation framework, improving coverage and adding support for new features in a timely manner.

Required
• B.S. in Computer Science, or equivalent.
• 5+ years solid experience delivering mission-critical testing for complex software. Bonus points for multi-tiered, embedded, or equivalent software.
• Experience developing automated software testing using Python. Currently, we are looking for a high level of python programming expertise.
• Experience collaborating with subject-matter experts to develop original test strategies for challenging test environments.
• Experience using proprietary or open-source testing tools/frameworks to improve any aspect of the testing cycle; e.g: improve results analysis, improved test development time, coverage or scope.
• Exceptional communication and interpersonal skills; in particular, the ability to confidently represent the software verification team and discuss test design, results and scenarios with others in the company without a software background.

Desired
• Experience with aircraft certification (DO-178B and DO-178C), regulatory requirements, compliance testing, aircraft software engineering processes, and test verification.
• Experience reading and working with Embedded software written in C/C++



The Structures Company is an AA/EOE.
 
Job Number: 393
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Battery and Motor Test Infrastructure

Description:
Searching for an engaged engineer who will develop a regression test environment that will support us to achieve our software certification goals. You will design and build hardware in the loop (HiL) simulations for motor inverters and battery management systems, program a Test interface that will exercise the simulation and add them to our continuous integration system in order to maintain code quality. You will participate in ground based HiL tests and flight tests, in order to gather data and help gain confidence in the quality of the embedded software and the safety of the vehicle. You will design, execute and maintain test cases, test reports, and supporting documentation for software certification purposes. Candidate is comfortable with electronic hardware, simulation based testing, and Python scripting. Candidate is an energetic, innovative person, expected to support rapid company growth towards our lofty goals. If you love working with new technology, and have passion for innovation and safety, this is the job for you.

Required
• Bachelors or higher degree in Electrical Engineering, Physics, Mathematics.
• Background in electrical engineering, motor and battery technology.
• Excellent Python programming proficiency.
• Matlab/ Simulink or similar mathematics tools.
• Interfacing with embedded software and electronic hardware.
• Hardware in-the-loop system simulations.
• Commonly used software development tools: Git, CLion, JIRA.
• Working with Oscilloscope, logic analyzer, soldering equipment.

Desired
• Quality Assurance or Test Engineering.
• DO-178C Software Certification.
• Agile software development, Unit Testing and Test Driven Development.
• Experience with HIL systems like Typhoon-HIL, Opal-RT or similar.
• Experience with Automation.
• Background in Power Electronics, Motor Control and Battery systems.
• Makers Faire, Robotics Project and/or Drone experience.
• Piloting aircraft, avionics hardware, electric cars or similar systems.



The Structures Company is an AA/EOE.
 
Job Number: 394
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Verification Engineer

Description:
Aviation Software requires comprehensive testing to ensure safety and to meet flight certification standards. Help company achieve software certification by testing the Embedded C/C++ code that controls vehicle flight and system monitoring. In this role you will work with a range of software, processor in the loop, and hardware in the loop simulators representative of the eVTOL system. Design, execute and maintain test cases, test reports, and supporting documentation for software certification and validation purposes. Become the Software Verification product expert on flight-critical software components and own the testing process. Additionally, you will use automated UI testing tools to automate testing of the system’s ground control software. Candidate should be an energetic, meticulous, self-motivated person with an adamant belief in the importance of product quality. If you love working with new technology, and have passion for innovation and safety, this is the job for you.

Required
• 2+ years Industry Experience in Quality Assurance or Test Engineering.
• B.S. in Computer Science, Mathematics, Mechanical Engineering, Aerospace Engineering, or equivalent real-world experience.
• Development of GUI automation tests.
• Strong background in Software Test and Verification.
• Development, execution and reporting of test cases.
• Reporting of defects, code coverage and other quality metrics.
• Project management, bug tracking and continuous integration tools, e.g JIRA, Jenkins, Team City.

Desired
• DO-178C Software Certification.
• Agile software development, Unit Testing and Test Driven Development.
• Robotics Project(s) and/or Drone experience.
• Piloting aircraft, avionics hardware, electric cars or similar systems.
• C/C++ and Python programming proficiency.
• Test Complete automation tool proficiency.
• Matlab and similar mathematics tools.
• Interfacing with embedded software and electronic hardware.


The Structures Company is an AA/EOE.
 
Job Number: 395
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Verification Engineer (C++ and Python) - Norther California

Description:
About the Job
Aviation Software requires comprehensive testing to ensure safety and to meet flight certification standards. Help company achieve software certification by testing the Embedded C/C++ code that controls vehicle flight and system monitoring. In this role you will work with a range of software, processor in the loop, and hardware in the loop simulators representative of the eVTOL system. Design, execute and maintain test cases, test reports, and supporting documentation for software certification and validation purposes. Become the Software Verification product expert on flight-critical software components and own the testing process. Additionally, you will use automated UI testing tools to automate testing of the system’s ground control software. Candidate should be an energetic, meticulous, self-motivated person with an adamant belief in the importance of product quality. If you love working with new technology, and have passion for innovation and safety, this is the job for you.

Required
• 2+ years Industry Experience in Quality Assurance or Test Engineering.
• B.S. in Computer Science, Mathematics, Mechanical Engineering, Aerospace Engineering, or equivalent real-world experience.
• Development of GUI automation tests.
• Strong background in Software Test and Verification.
• Development, execution and reporting of test cases.
• Reporting of defects, code coverage and other quality metrics.
• Project management, bug tracking and continuous integration tools, e.g JIRA, Jenkins, Team City.

Desired
• DO-178C Software Certification.
• Agile software development, Unit Testing and Test Driven Development.
• Robotics Project(s) and/or Drone experience.
• Piloting aircraft, avionics hardware, electric cars or similar systems.
• C/C++ and Python programming proficiency.
• Test Complete automation tool proficiency.
• Matlab and similar mathematics tools.
• Interfacing with embedded software and electronic hardware.

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.
 
Job Number: t3254
Job Location: CA
Rate: Open
Per Diem: $100-$160k
Duration: Direct
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Aerodynamicist

Description:
Seeking an aerodynamicist to take ownership of the analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.




The Structures Company is an AA/EOE.
 
Job Number: 398
Job Location: Southern, CA
Rate: $70-$90/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Software Engineer - Data Infrastructure

Description:
Working as a Senior Software Engineer you will be responsible for further development of infrastructure and platforms for wrangling data produced by test and flight operations. You should be able to work cohesively inside of a team, understand large data systems, and have an eye for scalable and flexible designs. You will also need to work closely with your colleagues across a broad set of highly technical disciplines who depend on data. The ideal candidate is energetic, has a positive attitude, is flexible and excited about learning and using new technologies.

The successful candidate will assist in architecting, designing, and implementing systems to:
• Wrangle data from a multitude of telemetry sources.
• Employ standard database technologies in a modern, scalable data mining and analytics system.
• Efficiently push, pull, and process data in support of Data Analytics and Machine Learning.
• Provide robust analytics platforms to Data Scientists and Analysts.
• Support visualization and presentation tools that help Scientists and Engineers realize value from data.
• Monitor performance, reliability, and trends to efficiently scale our Data Services infrastructure.

Required
• University degree in computer science, computer engineering, physics, mathematics, or similar field.
• 5+ years-experience in relevant industry.
• Expert knowledge of data system architectures.
• Expert knowledge of database technologies oriented towards time-series data and platforms for scientific computing and analytics.
• Expert knowledge of big-data and cloud methodologies, including extensive experience with Unix or Linux for development and deployment -- specific experience with Kubernetes and AWS considered a strong plus.
• Ability to support and work closely with a myriad of colleagues who are experts in aircraft design, systems engineering, test engineering, flight test operations, data analytics, and machine learning.


The Structures Company is an AA/EOE.
 
Job Number: 391
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Analyst

Description:
Seeking a leader to take ownership of structural analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop structural analysis methodologies that are aligned with industry best-practices and compliance with FAR civil certification standards. Define coupon test programs to establish material allowables and be highly versed in aerospace sizing methods and fatigue methodology.
Lead: Oversee the structural analysis capabilities of a small team and help empower new engineers with best in-class analysis techniques.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The senior structural analysis will also take the lead analyzing a myriad of critical components and primary structure. This includes both metallics and composites. Areas of focus include blades, propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include structural substantiation packages written to a high level of expertise as well as documentation of flight test limits for the analyzed components. This job may also require the senior structural analysis to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one) or equivalent experience/combined education.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in finite element analytical tools such as Hyper-Mesh pre-processors integrated with Nastran solvers (preferred), ANSYS or similar.
• Well versed in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar.
• Knowledge of fatigue analysis of critical structures using various substantiation methodologies (safe-life, flaw tolerant safe-life, damage tolerance among others) through the full-lifecycle. This includes developing and enforcing component strength limits in order to ensure the structural integrity of the component is maintained through the test and evaluation stages of the program.
• Experience supporting ground and flight testing of complex systems.
• Versed in gear and bearing design, and analysis of these components using tools such as Calyx and Romax. Experience designing and analyzing common housing features such as lugs and bolted joints.
• In addition to structural work, thermal, fluid, and dynamic analysis may be called for.
• The job entails using finite element software and classical analysis to help size dynamic components and select material specifications, along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
• Also desired are candidates with prior experience preparing certification documents for the FAA and direct interaction with a FAA Structural DER.

The Structures Company is an AA/EOE.
 
Job Number: 397
Job Location: Southern, CA
Rate: $60-$75/Hr. **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) has opportunities for experienced aircraft structural engineers capable of detailed stress analysis to support US DoD projects. Some of these positions are located in the Jacksonville, FL area. Other positions are open to remote workers within the continental US.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Review/perform analyses with hand calculations using OEM & DoD stress methods and industry standards
• Initiate complex repairs and prepare static strength/fatigue analysis of engineering repair dispositions for nonconforming aircraft structure
• Manage project components including establishing task priorities, scheduling and tracking work assignments, providing guidance, and ensuring the availability of resources
• Implement creativity and flexibility in daily activities by relying on experience and judgement to plan and accomplish goals
• Use Finite Element Software pre and post processors such as Nastran/Patran and Femap
• Develop reports that demonstrate designs satisfy all relevant design requirements
• Provide oversight and technical direction to less experienced engineers

Required Qualifications:
• 5+ years of work experience in airframe analysis
• Bachelor’s or master’s Degree in Engineering
o Mechanical or Aerospace preferred
• Ability to work independently and self-motivate
• Usable knowledge of aircraft static strength analysis methods, finite element analysis, and strain life fatigue methods
• Knowledge of maintenance and repair practices used in the aerospace industry
• Strong communication and interpersonal skills

Preferred Qualifications:
• 10+ years of experience in Stress
• Experience with NAVAIR or Air Force engineering and reporting procedures
• Familiarity with Femap, Patran/Nastran, or similar FEA software

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 601
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer, Flight Control - Northern California

Description:
Looking for a passionate engineer that can join our growing team. This is a multidisciplinary position that provides the engineer a chance to interact with many of the key teams within the company. The Systems Engineers will own the architecture, integration, and life-cycle success of a single or multiple aircraft systems, ranging from requirements management, development, certification, and entry into service. Systems Engineers will coordinate between the various departments - Mechanical Engineering, Electrical Engineering, Software, Flight Test, Manufacturing, Operations - as necessary to ensure the technical success of their systems. The Systems Engineers will work very closely with FAA Engineers and DERs to ensure their responsible systems comply with all federal airworthiness regulations.

This position requires a solid understanding of aircraft systems, system development, and industry specific certification processes. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking and thriving in a face-paced environment are highly regarded as well.

The Systems Engineer, Flight Controls will be responsible for some or all systems related to:
• System 22 – Automatic Flight
• System 27 – Flight Controls
• System 76 – Engine Controls
• System 86 – Lift Systems

Responsibilities
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements.
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities.
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects.
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements.
• Generate, review, and approve:
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required.

Required
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications.
• Previous experience with aircraft systems.
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A.
• Working knowledge of DO-160G environmental qualification.
• Excellent problem solving, communication, and technical writing skills.
• Basic knowledge of FAA regulations and guidance material and industry standards.
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred.
• Proficient in English.
• Proficient with Microsoft Office and Google Docs.

Desired
• Working knowledge of electro-mechanical equipment design, including software.
• Previous experience managing complex sets of requirements.
• Previous experience preparing and presenting design reviews for complex, highly integrated systems.
• Previous experience defining system controls, crew indications, and flight manual procedures.
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results.
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred.
• Experience and involvement with industry groups to develop consensus standards.
• 5+ years of relevant industry experience.
• Private pilot certificate or higher.
• Familiar with Dassault Systems engineering and management tools.


POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.
 
Job Number: t3256
Job Location: CA
Duration: Direct
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search