Job Search Results

709 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/15 Sunday 11:35PM Pacific Time by ContractJobHunter. )

Listings 1 - 709

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2230 - STRESS ENGINEER - resume - word doc only

Description:
Act as a specialist in a specific system/monument

Create and support the Design Interior Completions.

Create 3D detail design and provide drawing with working instructions and BOM to supply the line.

Continuously provide engineering support.

Create and integrate 3D models as per manufacturability.

Update model to encompass changes.

Be responsible to match customer definition package.

Create 2D drawing with integrated working instructions.

Update drawing to encompass changes.

Creation of Interface control drawings (ICD) and Cabinet Assembly and Installation.

Chair Digital Mockup Sessions (DMU) to remove roadblocks and mitigate design risks.


Have an Engineering Degree or College / Technical equivalent

Have a minimum of fifteen (15) years experience in a relevant field

Knowledge of Catia V5 is an asset.

Are knowledgeable on specific tasks: cabinetry, structure and installation, water and waste system, oxygen system, & aircraft wiring.

Are knowledgeable of engineering and standard building practices.

Good Problem solving and communication skills.

Must have a minimum of 5 years MRB experience.

Relevant technical experience in interior completion is required.

Must have experience in stress analysis and FEM and experience in at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Must have practical knowledge and experience of Nastran/Patran.

Must have excellent knowledge of aircraft structure and system installation technical requirements.

Must have practical knowledge and experience in aircraft structure and completion components.

Must be customer-oriented with innovative problem solving skills.

Must have good trouble shooting, organisation and communication skills.

Have the ability to write in French and English is an asset.
 
Job Number: 2230
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 07/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2234 - AIRCRAFT DESIGN ENGINEER - cv - word doc only

Description:
Create and integrate 3D and 2D models according to established standards and methodologies.

Update models and drawings with required changes.

Evaluation of concepts before production.

Provide on an ongoing basis, engineering support.

Work closely with the integration, methods, production, logistics, quality, certification and technical team functions.

Carry out verification of drawings and 3D models.

Manage multiple tasks at once, provide status to them and track variances.

Documented and follow the delivery approval cycle.

College diploma and 5 years experience in aeronautics or a manufacturing industry.

Bachelor's degree in engineering or equivalent and 2 years experience in aeronautics or a manufacturing industry.

Thorough knowledge of technical drawing.

Thorough knowledge in Computer Aided Design (Catia v5).

In-depth knowledge of design standards, configuration management and change management.

Good knowledge of the GD & T.

Good analytical skills.

Good communication skills.

A good sense of organization, planning and problem solving.

Knowledge of ENOVIA (an asset).

Experience in secondary structure would be considered an asset.

Exterior aircraft painting experience would be considered an asset.

Bilingual (French/English)
 
Job Number: 2234
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 07/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2236 - INTERIORS INTEGRATOR - cv - word doc only

Description:
Perform engineering integration of cabin systems.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues
impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and accumulated at least five (5) years of experience with aircraft mechanical systems.

Experienced with project and Supplier management.

Bilingual (French - English) written and spoken.

Ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Must be proficient in 3D design with CATIA V5.

Must be customer-oriented with innovative problem solving skills.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred).

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is an asset.

Must be capable of obtaining Design Authority status.
 
Job Number: 2236
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2237 - ELECTRICAL WIRING INTERCONNECT SYSTEM - cv - word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Support to Production; respond to RNC.

Provides technical assistance to engineering staff and
contributes to completion of project milestones.

Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.


University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Minimum 11 years of relevant aerospace experience.

Excellent verbal and written communication skills, and computer skills (PC/MS Office) are require.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA V5 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.
 
Job Number: 2237
Job Location: Mirabel, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/30/2017
Last Updated: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2238 - INTEGRATOR AVIONICS/ELECTRICAL SYSTEMS - INTÉRIORS - word doc only

Description:
Act as the system integrator to support CSeries manufacturing issue resolution.

Perform troubleshooting, systems analysis and produce action plan in conjunction with manufacturing team to successfully ensure return into service procedure and aircraft delivery. Also duty for production and delivery of engineering document to support product improvement and product modification.

Support interiors systems as:
Cabin Management System
In Flight Entertainment and Connectivity Systems
Water and Waste System, Oxygen System
Interior Lighting System
Electrical provisioning for Galley appliances
Flight Deck Remote Access and Flight Deck Door Surveillance System

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 3 years of relevant experience dealing with Aircraft systems, preference will be for previous experience with interior mentioned systems.

Will work on rotation team that support night and weekend aircraft manufacturing department (on-call).

Have strong knowledge on integrated aircraft systems to perform troubleshooting during return into service procedure.

Know engineering document release process, knowing Client procedure such as engineering order and configuration dataset.

Have a working experience using MS Office; CATIA skills and Enovia will be an asset.

Should be familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment.

Have a good oral and writing skills in English; French will be a definite asset.

Have the ability to work with minimum supervision and you are a team player.

Demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Are an energetic person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.
 
Job Number: 2238
Job Location: Mirabel, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 07/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

7 Aircraft Stress Engineers with Composites

Description:
7 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/06/2018
Last Updated: 07/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/27/2017
Last Updated: 07/11/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Aerospace Engineers for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform a variety of engineering work in designing, constructing, and testing aircraft
• Designs and supervises the construction of aircrafts and associated parts such as airframe, auxiliaries, communication equipment, controls, fuselage, and powerplant
• Responsible to ensure all issued Engineering instructions follow all client technical specifications and policies
• Responsible to make timely assessments of structural difficulty affecting maintenance or mod lines
• This includes SRM/AMM navigation, IPC interchangeability, AD/Service Bulletin/modification status, and compliance to all FAA standards (Fuel Tank Safety CCDLs, EWIS requirements, CMRs and AWLs)
• Responsible to coordinate trouble shooting and corrective actions (repair, modification, and inspection instructions) with maintenance technicians, managers, and foremen to minimize impact to the operations
• Must practice safety-conscious behaviors
• Working hours based on operational requirements including off-hours and weekend coverage
• Travel is required based on operational requirements

Basic Qualifications:

• Four year accredited undergraduate engineering degree required - Aeronautical/Aerospace, Electrical, Mechanical preferred
• Other Engineering degrees (such as Chemical, Civil, or Structural) will be considered
• Must possess leadership, communication, and technical credibility skills in the following areas: (1) Structural Analysis, including Statics, Mechanics of Deformable Bodies, Materials Science and Fracture Mechanic

Preferred Qualifications:

• At least 6 years’ of experience in the design and analysis of aircraft structural repairs
• Previous experience with aging aircraft structure is preferred
• Previous experience with aircraft Wifi structural modifications preferred
• At least 2 years’ of experience providing engineering support for line aircraft and live aircraft operations
• Candidates with fewer years of experience will be considered and if selected, on boarded according to experience
• Ability to analyze incomplete information, make timely decisions, develop innovative solutions, and mitigate risks to both safety and the operations
• Thorough knowledge of FAA regulations and/or familiarity with EASA regulations
• Excellent interpersonal skills and the ability to work effectively with all levels of engineering, maintenance, and planning
• Must be performing satisfactorily in present position
• Working knowledge of Microsoft programs (Word, Excel, Access) and AutoCAD (or similar CAD software)
• Candidate must be available for client's Technical Operations on-site job training and business familiarization required during the initial period of employment

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39204
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Program Manager

Description:
Currently seeking full-time and contract Program Managers to fill openings with an aerospace flight test, engineering and certification organization located in Moses, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs.
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a
The Program Managers responsibility consists of supporting management of programs through the program lifecycle to achieve or surpass the capability, schedule, and financial performance of customer programs. This position acts as primary customer contact for a programs status, deliverables and cross-disciplinary technical leadership, across a multitude of external contacts and internal team members to ensure customer requirements and expectations are met. Program Managers may also be responsible for overseeing the similarity review process to ensure aircraft components meet certification requirements.

Duties & Responsibilities
• Communicate with potential client to determine scope of project for desired services, timeline and cost sensitivity.
• Conduct internal reviews to determine program staffing to ensure technical skills are paired with technical needs at the appropriate time.
• Create business proposals including schedule, deliverables, and cost.
• Provide business proposals to potential clients and negotiate terms.
• Partnering with Contracts, finalize business proposals including ensuring contract conditions minimize company risk.
• Develop control systems that accurately measure progress of schedule, risk, and technical performance and with sufficient time for corrective action should issues arise.
• Manage program budget, identify and mitigate potential over-runs before they are realized.
• Manage relationship with client throughout project
• Review component qualifications through similarity comparison to ensure they meet certification requirements.
Requirements
• Four (4) year degree in Engineering or equivalent Technical Program Management experience
• 5 + years of relevant experience
• Working knowledge of Part 25 Requirements and Aircraft Certification process desired.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Repair Engineers - Everett, WA

Description:
STS AeroStaff Services is currently hiring Aerospace Repair Engineers for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Provide repair solutions for in service aircraft and aircraft in heavy maintenance. Applicant will have relevant airline, MRO, or OEM in-service support experience. Solutions consist of the engineering design and support documentation suitable for FAA and customer approval for modifications and/or complex repairs on aircraft and components. Duties will include accomplishment of task assignments as directed from a Project Lead or Engineering Management. Develop and substantiate engineering documents and provide assistance, mentorship, and training for less-experienced engineering staff, and interact with different members of internal and external organizations. Provide on-site support for shop personnel and act as on-site liaison for company engineering functions.

Job Duties:

• Develop and substantiate complex aircraft repairs using standard accepted industry practices
• Produce technical investigation for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, client, operations, and maintenance requirements
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed
• Background should be familiar with composite structures and components
• Provide written technical accomplishment instructions for complex aircraft and component repairs or modifications to maintenance, customer, and regulatory authorities as necessary
• Create various types of engineering drawings using common CAD software such as AutoCAD and Solidworks
• Ensure and confirm that all applicable customer, OEM, regulatory, and maintenance requirements are met
• Approve engineering documents within authorized signatory level
• Participate in the development of work statements and hour estimates in support of proposals
• Represent client on engineering technical matters with OEM’s, customers, operators, and regulatory authorities
• Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions
• Lead activities of engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of modifications and repairs during maintenance and component overhaul visits
• Plan, review, organize, and prioritize engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules

Qualifications:

• Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of 7 years’ relevant aerospace experience or 15 years’ of equivalent aircraft design experience required
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered
• Ability to check 2D drawings and 3D models at the detail, assembly, and installation level
• Strong PC skills including the MS Office suite and computer drafting skills
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies
• Ability to understand and promote the policies / procedures of client, and client Engineering
• Ability to understand and apply the policies / procedures of all customer(s)
• Assertive communication skills
• Ability to work independently and follow through on assignments with limited direction
• Show positive attitude and volunteer for various assignments in order to complete program on schedule and budget
• Self-motivated and multi-tasker; able to level load own workload
• While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk or hear; and focus on objects close up
• The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl
• The employee may be required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39172
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structures Engineer

Description:
We are seeking full-time Aerospace Engineers with Structures experience to join our Flight Test Facilities in Moses Lake with the ability to work rotations in our Seattle offices. If you have 4+ years of experience in Structures, we would like to speak with you.
Job Duties
• Create and review Certification Plans.
• Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
• Review qualification by similarity and/or analysis reports.
• Review system safety documents.
• Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
• Perform Component Drawing Reviews.
• Complete aircraft assembly and installation drawing reviews.
• Participate in Systems Design Reviews.
• Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
• Support Test planning and preparation activities
• Support Pre and Post Flight Briefing.
• Monitor live flight data, typically via telemetry
• Process and Analyze Post Flight data.
• Appropriate the disposition of non-conformances, quality escapes, etc.
• Document flight test design problems for long term fixes.
• Conduct Tlight Test Report Writing.

Requirements
• Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
• 4+ years of aerospace experience.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
• A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent AeroTEC professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities for the company.
• Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Engineers - Everett, WA

Description:
STS AeroStaff Services is currently hiring Aircraft Electrical Engineers for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Develop engineering design, analysis, and substantiation documentation in support of avionics and electrical modification programs. Duties will include management of tasks independently with assignments provided by the Project Lead or Engineering Management. Duties will also include providing guidance and assistance for less-experienced Engineering staff, and interaction with different members of internal and external organizations.

Job Duties:

• Interface and coordinate with other Avionics/Electrical Engineers for input on system interface wiring requirements to support the electrical harness and equipment installations
• Develop and design avionics & electrical systems, at the aircraft level, for aircraft installations such as; Cabin Management, IFE, BC/ Seat Accommodations, Interior Lighting for interior integration modification programs
• Develop and design avionics systems to support aircraft updates and modifications such as; Communications, Navigation, Recording & Monitoring, Instrumentation and other aircraft related avionics systems
• Develop electrical and avionics system compliance and substantiation Documents/Reports in support of FAA, EASA and other Foreign CAA approvals
• Develop aircraft drawing and document packages to include; System Schematics Manuals, Fault Isolation Manuals, Wiring Diagrams, Wire Lists, Connector Lists, Hookup Lists and Parts Lists
• Develop engineering plans, reports and substantiation packages to include; Test plans, EWIS, AFMS, FMEA, SSA, TVSA, ELA
• Perform technical review of supplier documentation to support electrical and avionics system requirements
• Develop Engineering Orders and Work Instructions for aircraft installations
• Review existing technical data, technical drawings, and previous history for entire aircraft systems; avionics, electrical and mechanical
• Provide written technical accomplishment instructions for aircraft modifications, or repairs to maintenance, customer, and regulatory authorities as necessary
• Communicate technical details of designs through technical writing and computer drafting functions
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency
• Plan, review, organize, and prioritize engineering assignments to ensure completeness of tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules
• Carries out the policies and procedures of client and client Engineering and notifies Engineering Management when these procedures are not followed
• Position may require overnight travel, being on-call, and responding to technical AOG situations during off hours
• Position may require being assigned to alternative shifts such as Day, Night, Swing, and Weekends
• Assist Engineering Management with additional tasks when business needs arise
• Perform other duties as assigned

Qualifications:

• Bachelor of Science (B.S.) degree in Electrical Engineering desired with a minimum of 7 years’ relevant aerospace experience or 15 years’ of equivalent aircraft design experience required
• Proven proficiency in AutoCAD for design and development of aircraft wire routing drawings for shipside and monuments to latest FAA and EASA design standards to meet customer requirements
• In depth knowledge of FAA and EASA compliance requirements in support of electrical and avionics systems and installations
• Understands wire schematics and system block diagrams
• Extensive technical knowledge of Boeing and Airbus aircraft for commercial models related to electrical and avionics systems
• Ability to work and make decisions independently with limited supervision
• Strong working knowledge of My Boeing Fleet and Airbus World for OEM data sets
• Thorough knowledge of equipment/wire installation
• Knowledge of electrical and avionics standards such as; RTCA, ARINC and SAE
• Ability to trouble-shoot electrical and avionics systems
• Competent user of CAD and data management systems
• Ability to understand and derive multiple customer standard electrical system requirements
• Must be able to provide layouts and program design reviews
• Coaches and mentors others on best design practices
• Ability to work well independently and cross-functionally across multiple organizations
• Strong communication, time-management and problem-solving skills
• Proficient in Microsoft Office applications
• Ability to travel as required
• While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk or hear; and focus on objects close up
• The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39171
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Inspectors - New Orleans, LA

Description:
STS AeroStaff Services is currently hiring Aircraft Inspectors for open positions in New Orleans, Louisiana.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Verifies product conformance to design requirements
• Provides objective evidence of results
• Validates work instructions, tooling requirements, certifications, process standards, policies and procedures
• Identifies and documents discrepancies and segregates and controls non-conforming items
• Performs preliminary review and disposition of non-conformance
• Conducts product review with customer during product or process verification
• Identifies repetitive or significant non-conformances and initiates requests for corrective action
• Some Travel will be required

Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39211
Job Location: New Orleans, LA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic, Army C-12

Description:
Major purpose:
Troubleshoots, repairs and services aircraft and engine systems.
Conducts diagnosis of malfunctions.
Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.
Maintains FAA required records, manuals and inspection forms.

Major functions:
The Aircraft Mechanic is required to maintain all aircraft/systems in accordance with and within the limitations of the FAA and the aircraft manufacturer.

The Aircraft Mechanic reports directly to the Lead Mechanic on a day-to-day basis. When traveling to other sites to perform assigned duties, he/she would then report to the Fleet Manager.

The Aircraft Mechanic is responsible for, but not limited to:
• Inspect and certify aircraft at specific intervals as required by client, Government, and the FAA. Ensure inventory spares and materials to include receiving, usage, reporting, shipping, transfer, scrap, and replenishment are handled using established company procedures.

• Ensure timely submission of required reports and documents to Program Management and the Government.

• Ensure that the site assigned company and Government owned/operated/possessed items are maintained.

• Ensure required entries are made in the aircraft logbooks, configuration records, site records and Management Information System (MIS).

• Ensure compliance with quality and safety procedures/operations at the site level.

• Ensure company rules ( ASD Work Rules), standards, regulations, and policies are adhered to, enforced, and initiate actions to correct infractions.

• Advise the Fleet Manager/Site Supervisor promptly of unresolved or developing problem areas.

• Perform Collateral Duties and Responsibilities, as assigned by the site Lead/Supervision.

Work hours may be adjusted for operational requirements.
Technical/Functional skills:
Education/Experience/Licenses etc.: Qualifications

Education and Experience Requirements:
• High School Diploma or equivalent.
• A FAA Airframe and Powerplant license.
• A minimum of three (3) years' recent hands on airframe and powerplant experience.
• A minimum of one (1) year of King Air hands on experience.

Qualifications:
Must be able to obtain and maintain a DoD Secret security clearance and Passport (if requested) to support contractual obligations.

Knowledge, Skills, and Abilities:
• Must have the ability to communicate clearly and concisely.
• Must be able to travel to other locations requiring overnight stay.
• Must be able to lift 20 pounds routinely and 50 pounds on occasion.
 
Job Number: 17-31145
Job Location: McGuire AFB, NJ
Rate: 36.09
Per Diem: No
Overtime: Yes
Duration: Direct Hire
Start Date: 7/17/2017
Input Date: 07/05/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts & Tooling Specialists - Fort Lauderdale, FL

Description:
STS AeroStaff Services is currently hiring Aircraft Parts & Tooling Specialists for open positions in Fort Lauderdale, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide accurate tooling/ aircraft parts/ materials in a safe and efficient manner, to the Repair Station floor personnel. To maintain the stock and inventory in the designated storage area. To purchase quality goods and services for client, in compliance with client cost controls, ethics, and purchasing standards.

Job Responsibilities:

• Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors
• Determines best supply source by analyzing: best price & delivery method via Internet and media
• Identifies the most cost effective product or service, and economical/reliable inbound transportation method
• Identifies new vendors in order to meet required and future needs of the company
• Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services
• Enters and updates material requests and new vendors in Quantum
• Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval
• Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with client policies
• Faxes confirmation purchase order to vendors
• Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable
• Communicates with vendors & transportation companies to ensure on-time shipment/delivery
• Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues
• Maintains accurate records of: approvals, items ordered, and items received
• Coordinates return of defective or incorrect shipments
• Locates alternative sources of supplies, materials and parts
• Processes client rotable inventory/on-site stock/core returns to support operational functions
• Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing
• As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar Floor and Stock Room
• Arranges for safe and proper disposal of surplus materials
• Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration
• Keeps stock room clean and neat
• Follows appropriate client safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments
• Provides indoctrination safety instructions to colleagues handling the shipments as necessary
• Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians
• Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices
• Distributes to departments any miscellaneous technical information received by the stockroom
• Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records
• Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management
• Reports shipping discrepancies and damaged parts/materials to management
• Traces shipments en-route and expedites/re-routes shipments of an urgent nature
• Prepares tooling, parts, components, etc. for shipment to vendors and customers
• Determines packaging requirements from specifications, oral instructions, or knowledge of materials to be shipped and shipping conditions
• Packs, seals, labels, and affixes postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter
• Builds/repairs shipping crates as required for re-shipment
• Selects appropriate routing of outbound shipments, prepares bills of lading, and maintains records of materials shipped
• The Agent may delegate duties to any qualified assistant as necessary and with management approval, but such delegation does not relieve the Agent of the overall responsibility of the position’s job duties
• Complies with company and department norms, policies, directives, and procedures
• Guarantees reliability and quality of information
• Maintains necessary internal and external contacts
• Suggests improvements to processes and procedures
• Honors and protects confidential and proprietary documents and information
• Satisfies work schedule requirements
• Additional duties may be assigned

Education:

• High School diploma or equivalent
• Employees performing the same job function for a period of 3 years’ or more are considered qualified in the position, independent of the requirements referenced above and need not supply evidence regarding school diplomas, etc.

Desirable:

• Bachelor Degree in Supply Chain/Logistics, Purchasing, or Aerospace

Experience:

• Generally at least 3 years’ of experience in area of responsibility
• Experience in Aerospace or Aviation Shipping & Receiving, loading/unloading, handling, checking, transportation, storage and distribution of spare parts, tools, technical publications and other materials
• 2+ years’ prior work experience in Aerospace purchasing and inventory control
• English fluency
• HAZMAT knowledge
• Forklift experience

Desired:

• Executive Jets/Corporate Repair Station or Military MRO prior work experience

Knowledge, Skills, & Abilities:

• Assignments require thorough knowledge of all possible tasks and responsibilities
• Skills are effectively applied in accomplishing all tasks
• Shipping and receiving techniques
• Aircraft Parts and Tooling knowledge
• Aircraft Part & Supplies basic purchasing techniques & practices
• Basic office skills, internet explorer, MS Excel
• Knowledge of handling hazardous materials DOT – HAZMAT certificate, forklift training
• Valid Motor Vehicle Driver’s License

Desirable:

• MS Excel, Quantum, Lotus Notes

Working Conditions/Environment/ Special Requirements:

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations
• Ability to work flexible hours and different shifts if required
• Employees will be subject to the random drug and alcohol testing under FAA regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38483
Job Location: Fort Lauderdale, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Autodesk Inventor Designer/Drafters - Everett WA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Engineering industry on a permanent or contractual basis.

Keltia Design is in need of a Autodesk Inventor Designer/Drafter to work from our Everett WA.
The job involves modifying some design and draft work on pressure vessels. A minimum of 5 years exp on Autodesk Inventor
This is a short term assignment but there are lots of other opportunities in the pipeline with other projects involving Catia, Solidworks, and Inventor.

-Strong Computer Aided Drafting/Design skills (Autodesk Inventor required).
-Knowledge of industry design and documentation standards.
-Ability to work independently and cross-functionally
-Strong communication and problem-solving skills
-Strong time-management and organizational skills
-Experience adhering to budget and project schedules
 
Job Number: Keltia111417
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: KELTIA DESIGN INC
Attention: Vincent
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Engineering Estimating Specialist -

Description:
AIRFRAME ENGINEERING ESTIMATING SPECIALIST

15 MONTHS

STRATFORD, CT

Description:

The selected candidate will provide support the Aircraft Design and Manufacturing Engineering (ADME) organization as member of the ADME Core Services group.

The ADME Core Services group supplements ADME’s technical engineering expertise with best-in-class project execution capabilities enabling it to excel in meeting defined business objectives. The Engineering Estimating element of Core Services supports Sikorsky USGBO Proposals for both Foreign Military Sales (FMS) and Direct Commercial Sales (DCS) customers.

The Engineering Estimating Specialist will:

Support the Estimating Lead by developing estimates and proposal related documents.
Provide detailed estimates to the Estimating Lead based on USGBO schedules, Statements of Work, Configuration Matrices, and Bill of Materials.
Help develop Engineering Design plans to support proposal requirements.
Estimate Airframe Design Engineering budgets.
Must have a working knowledge of Airframe Structures and Aircraft systems. Experience with the Blackhawk product preferred.
Must have a working knowledge of aircraft drawings. Must be able to interpret aircraft drawing and Bills of Material. Experience in Airframe Design required.
Working knowledge of a WBS structure and the SAC Contract Operating System (COS) is preferred.
Must have a working knowledge of DFARS compliant estimating requirements.
Estimate Airframe Process Engineering budgets.
Must have a working knowledge of Aircraft Planning and Tooling methods.
A Working knowledge of Systems, Applications & Products in Data Processing (SAP) and Solumina is a plus.
Review Proposal Statements of Work. Understand requirements and provide feedback on compliance issues.
Review Proposal Schedules. Provide feedback on plan/schedule issues.
Help develop Engineering Integrated Master Schedule (IMS) activities and linkages.
Must be able to work independently and coordinate efforts with concurrent branches/resources.
Experience/Qualifications:

The ideal candidate will demonstrate many or all of the following qualifications:

BS in engineering or suitable equivalent
Minimum of 5-6 years of experience in aircraft design or manufacturing engineering
Minimum of 2-3 years of experience in aircraft estimating
Ability to communicate effectively with leadership and working level team members
Highly motivated and flexible individual with a track record of demonstrated results
Working knowledge of SAC Contract Operating System (COS). Experience with Systems, Applications & Products in Data Processing (SAP) is a plus. Experience with Solumina is a plus
Strong MS Excel, Word & Power Point skills
 
Job Number: 358690
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 07/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer - Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7314
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/14/2017
Last Updated: 11/10/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Avionics Systems Designers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Avionics Systems Designer duties are defined but not limited to system integration and installation design for complex avionics, electronics and electrical systems on helicopters and fixed wing airplanes including air transport. (Notes from the Hiring Manager: If the prospect knows AutoCAD 2012 or 2013, it is not much different than AutoCAD LT 2014 and can be taught. We would be happy to look at people that may not be degreed but have the experience and needed qualifications. E.G. The person that we were going to start was not degreed, but was a DER.)

Job Duties:

• Define systems integration and interface with existing onboard avionics, electronics and electrical systems and generate systems wiring diagrams for the defined systems interface
• Create electrical fabrication drawings (wire harness, coax cable, electrical/electronic assembly) for the defined systems integration and interface
• Create on aircraft installation drawings for the defined systems integration and interface
• Create detailed wire routing and clamping drawings for the defined systems integration and interface
• Generate parts list in Microsoft Excel and import into AutoCAD drawing for the installation and fabrication drawing
• Convert design data to Portable Document Format (PDF) files
• Create aircraft modification instructions (Engineering Order) with weight and balance and electrical load changes
• Create instructions for continued airworthiness and Technical publication such as AMM, IPC, FCOM, AWD, etc.
• Request guidance from engineer when uncertainty occurs
• Create detailed systems functional test instructions for the newly installed equipment/systems
• Conduct detail review of drawings completed by draftsperson or co-workers for accuracy
• Perform research and on aircraft survey as required for the assigned project
• Communicate with Supervisor, and other company employees concerning duties performed and results obtained
• Adhere to all client company policies, safety guidelines, and code of ethical conduct
• Other tasks as assigned by supervision and company management

Qualifications:

• Three years’ direct systems integration design experience
• Proficiency in Autodesk AutoCAD LT 2014 required
• Computer skills using Windows 7 and Microsoft Office
• Ability to work in a highly technical fast paced environment
• Ability to adapt to new software application and function with minimal training or by self-training
• Knowledge of Military Standards and Specifications, and SAE Standards and Recommended Practices
• Professional interpersonal skills over the telephone, via email and in person
• Read, write and communicate using English language and proper grammar sufficient to perform the job functions (due to the nature of the job, will be communicating in English)
• Professional office environment experience which required interaction with internal and external customers
• Work as a contributing member of a team
• Work within company published policies
• Knowledge and experience in Adobe Acrobat X Professional preferred
• Knowledge and experience in Adobe Illustrator Creative Suite 6 preferred
• Experience with Airbus ESPM and Boeing SWPM a plus
• Knowledge of 14 CFR Parts 23, 25, 27 and 29 a plus

Competency:

• Understand written and/or verbal instructions to successfully perform tasks
• Ability to work in a fast pace environment as part of a team
• Use computer based programs to clock in/out and perform other self-serve duties
• Use time efficiently
• Work in a fast paced environment
• React well under pressure
• Use computer based programs to clock in/out and perform other self-serve duties
• Be able to work efficiently with other employees as part of a team or individually

Working Conditions/Physical Requirements:

• The Avionics Systems Designer must be able to crawl in the aircraft and take photos on some specific area for design purpose
• Most often, the working conditions for the Designer is an office-type environment
• This position requires sitting for long periods of time
• The employee must rarely lift and/or move up to 10 pounds and/or move up to 25 pounds
• While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear
• The employee is frequently required to reach with hands and arms
• The employee is required to move quickly between work locations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36721
Job Location: Melbourne, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Avionics Systems Engineers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Define systems integration and interface with existing onboard avionics, electronics and electrical systems and generate systems wiring diagrams for the defined systems integration and interface if the prospect knows AutoCAD 2012 or 2013 (it is not much different than AutoCAD LT 2014 and can be taught). We would be happy to look at people that may not be degreed, but have the experience and needed qualifications. (E.G.: The person that we were going to start was not degreed, but was a DER.)

Job Duties:

• Create electrical fabrication drawings (wire harness, coax cable, electrical/electronic assembly) for the defined systems integration and interface
• Create on aircraft installation drawings for the defined systems integration and interface
• Create detailed wire routing and clamping drawings for the defined systems integration and interface
• Generate parts list in Microsoft Excel and import into AutoCAD drawing for the installation and fabrication drawing
• Convert design data to Portable Document Format (PDF) files
• Create aircraft modification instructions (Engineering Order) with weight and balance and electrical load changes
• Create instructions for continued airworthiness and Technical publication such as AMM, IPC, FCOM, AWD, etc.
• Calculate modification or complete electrical load and generate the electrical load report for all flight phases as required
• Create detailed systems functional test instructions for the newly installed equipment/systems
• Provide guidance to the draftsperson and designer, and review completed drawings
• Estimate tasks schedule, prioritize tasks with little or no supervision and complete tasks within estimated schedule
• Perform research and on aircraft survey as required for the assigned project
• Perform project engineer function assigned by the supervisor as needed
• Communicate with Supervisor, and other company employees concerning duties performed and results obtained
• Adhere to all client company policies, safety guidelines, and code of ethical conduct
• Other tasks as assigned by supervision and company management

Qualifications:

• BSEE or BS Avionics Engineering.
• Thirty-six months direct systems integration design experience
• Proficiency in Autodesk AutoCAD LT 2014 required
• Computer skills using Windows 7 and Microsoft Office
• Ability to work in a highly technical fast paced environment
• Ability to adapt to new software application and function with minimal training or by self-training
• Knowledge of Military Standards and Specifications, and SAE Standards and Recommended Practices
• Professional presentation interpersonal skills over the telephone, via email and in person
• Read, write and communicate using English language and proper grammar sufficient to perform the job functions (due to the nature of the job, will be communicating in English)
• Professional office environment experience which required interaction with internal and external customers
• Work as a contributing member of a team
• Work within company published policies
• Knowledge of 14 CFR Parts 23, 25, 27 and 29 preferred
• Knowledge and experience in Adobe Acrobat X Professional preferred
• Knowledge and experience in Adobe Illustrator Creative Suite 6 preferred
• Experience with Airbus ESPM and Boeing SWPM a plus
• FAA systems certification experience a plus

Competency:

• Understand written and/or verbal instructions to successfully perform tasks
• Ability to work in a fast pace environment as part of a team
• Use time efficiently
• Work in a fast paced environment
• React well under pressure
• Use computer based programs to clock in/out and perform other self-serve duties
• Be able to work efficiently with other employees as part of a team or individually

Working Conditions/Physical Requirements:

• The Avionics Systems Engineer must be able to crawl in the aircraft and take photos on some specific area for design purpose
• Most often, the working conditions for the Avionics Engineer is an office-type environment
• This position requires sitting for long periods of time
• The employee must rarely lift and/or move up to 10 pounds and/or move up to 25 pounds
• While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear
• The employee is frequently required to reach with hands and arms
• The employee is required to move quickly between work locations
• Vision abilities required by this job include ability to read printed and computer displayed material

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36722
Job Location: Melbourne, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/CompanyODA STC/MRA/TC projects.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7316
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/13/2017
Last Updated: 08/16/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineering Contractor

Description:
Unique Skills:
Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/Client ODA STC/MRA/TC projects. Looking for a seasoned/experienced electrical engineer/designer/integrator with Client experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Job Description
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-690-100161
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Chief Aviation Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements;
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes
• Enforcing the Zero Harm Culture and goals

Qualifications:

• Part 65 A&P or Repairman Certificate
• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs.
• Must be able to read, write and understand the English language
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39350
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Avionics Systems Engineer -

Description:
Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

Primary Responsibilities

Development of requirements
System Integration
Generation of lab and aircraft test procedures
Troubleshooting avionics issues on test, production and fielded aircraft
Support program management reviews
Beneficial Experience

FAA and foreign certification (preferred)
DO-178B, DO-160 and DO-254 processes (preferred)
Technical project management (preferred)
Supplier technical management (preferred)
Pilot or A&P experience (preferred)
Educational Requirements:

BS Engineering in a related field w/7+ years relevant professional experience
Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
 
Job Number: 356482
Job Location: Trumbull, CT
Rate: $56hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 08/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
- CATIA V5 and SmarTeam experience required - Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc) – Client Aircraft experience preferred Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-755-100245
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/24/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - ECS Cooling Systems Engineering Contractor TS II

Description:
Unique Skills:
Candidate should have experience with: - Aircraft environmental control systems (ECS) - Specialized onboard equipment cooling systems, including - Liquid cooling systems - Air cycle systems - Vapor cycle systems - Cooling system performance analysis - Heat exchanger design and analysis - Component qualification, certification test - System test and certification - Part 25 and DO-160 - Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 104343
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Electrical Harness installation Engineer

Description:
Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, and PC/MS Office) are required. Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
See Other Requirements in Job Description.
5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 94842
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Maintainability Engineer III

Description:
Unique Skills:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Education and Experience Requirements:
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 10661
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Metrology Engineer II

Description:
Unique Skills:
Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 105981
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Powerplant/ECS/Fuel Engineer - TS II

Description:
UNIQUE SKILLS
- Technical competency in the evaluation of fuel tank ignition risk assessments on a component level. - Competency in the application of fault and latent failure component design analysis. - M&P experience - Experience with Critical design configuration control limitations, inspections and maintenance procedures to prevent the development of fuel tank ignition sources. Increasing flammability exposure of aircraft fuel tanks. - Experience with identification of systems critical features where maintenance, repairs, or alterations may compromise CDCCLs.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-756-72802
Job Location: Southeast
Rate: $55.00 to $61.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Product Assurance Engineering Specialist I

Description:
Unique Skills:

Seeking engineering-based position within the quality organization related to design model checking & verification.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Advanced degree in engineering or related curriculum preferred. 5 years in a specific technical discipline or 8 years broad eng experience in several technical disciplines. Credit will be considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to the position


Position Purpose:

Collaborates with engineering, operations and procurement in a team environment on development programs and assists in ensuring aspects of the designs, test articles and supplied/manufactured articles are capable of being produced in accordance with approved quality system requirements and certified as compliant to aircraft type design requirements.

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to incorporating design quality assurance on development programs and participates in new product design and development, design validation/verification, risk management, planning, flight test and design change activities. 2. Partner with design engineers and assist in resolving quality issues and executing design, development, and design transfer initiatives which may include design/process quality capability analysis, supplier selection, requirements incorporation validation. 3. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. 4. May partner with Manufacturing Engineers to develop/validate manufacturing processes and provide technical quality support for process planning. 5. Assists in use of risk management tools (i.e. FMEA) as appropriate. 6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements: 1. Good understanding of and experience with key design characteristics definition, FMEA, statistics theory and application (SPC) preferred. 2. Competencies include: Design control, project management skills, strong interpersonal skills, excellent computer skills, risk management, and strong results orientation. 3. Familiar with Geometric Dimensioning & Tolerance (GD&T) 4. Knowledge of state-of-the-art quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts preferred. 5. Ability to read, analyze and interpret technical documents, Engineering drawings and 3D models. 6. Ability to define problems, collect data, establish facts, and draw valid conclusions. 7. Capable of working closely with RD&E, Manufacturing and Operations regarding active product quality planning (APQP) through the use of quality control plans and product & process FMEA tools.
 
Job Number: 107341
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Stress Analysis Engineer

Description:
Unique Skills:
**Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. CATIA V5, NASTRAN, and PATRAN, are desired. Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 107382
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Special Missions

Description:
Structural Design Engineer - Special Missions

Location: Savannah, GA
Pay Rate: $60/hr - $63/hr
Duration: Long Term Contract
Shift: First
**Must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership.
-The group is involved with the current Company fleet and new product development.
-This job is for placement in the Core team working on the Special Missions aircraft.

Qualifications:
- Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
- Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in CATIA v4
- Proficiency in SmarTeam PLM database
- Experience with green aircraft structural modification
- Prior work experience with Company aircraft design
- Experience with knowledge management processes

Responsibilities
- Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track and manage design projects of various magnitudes using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7443
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/17/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Technical Specialist I

Description:
Unique Skills:
Check 3D engineering data for conformance to Client requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Client requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of parts list & PdocM, a plus.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-684-98741
Job Location: Southeast
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer: Mechanical Systems

Description:
Design Engineer - Mechanical Systems
Mojave, CA
Long term contract: 12+ months
Pay rate: up to 65/hr

Desired Skills
CATIA;Mechanical system design and integration.
Job Description Rich
 
Perform  preliminary and detail design of aircraft mechanical systems, including flight controls, hydraulic systems and ECS systems.
Create 3D/2D definition.
CATIA V5 is a plus.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
Notes
6 paid holidays
Annual bonus
Sick pay
Per diem if qualify
401k
MUST be US Persons



The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to 65/hr
Per Diem: yes
Overtime: possible
Duration: 12+ months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/24/2017
Last Updated: 07/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dynamic Loads Engineer

Description:
Dynamic Loads Engineer

Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Long Term contract


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

As an Engineering Contractor in Dynamic Loads, you will:
• Analyze aircraft structural dynamic response and load distributions for gust, landing and taxi conditions.
• Provide solutions for aircraft vibration problems

What you'll bring to the team:
• Knowledge of aircraft aeroelasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling
• Experience with MSC Nastran and Patran or a comparable application
• Experience with Gust Loads Analysis in MSC Nastran
• Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus

What the Loads & Dynamics team does:
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
 
Job Number: 7170
Job Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dynamics & Flutter Engineer - AAP

Description:
Dynamics & Flutter Engineer - AAP

Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Long Term contract

Unique Skills:
As an Engineering Contractor in Flutter & Dynamic Loads, you will:
• Provide solutions for aircraft flutter and vibration problems
• Analyze aircraft structural dynamic response and load distributions for gust, landing and taxi conditions.
• Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
• Knowledge of aircraft aero elasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling
• Experience with MSC Nastran and Patran or a comparable application
• Experience with ground tests such as ground vibration tests or landing gear drop tests
• Experience with flutter flight testing
• Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
• Experience with aeroservoelasticity is a plus

What the Loads & Dynamics team does:
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7057
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling System Eng

Description:
Bachelor's with 10 years experience with:
- Aircraft environmental control systems (ECS)
- Specialized onboard equipment cooling systems, including
- Liquid cooling systems
- Air cycle systems
- Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification, certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination
 
Job Number: 104343
Job Location: Savannah, GA
Rate: 70-77
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 07/18/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling Systems Engineer

Description:
Candidate should have experience with
• Aircraft environmental control systems (ECS)
• Specialized onboard equipment cooling systems, including ; Liquid cooling systems, Air cycle systems, Vapor cycle systems, Cooling system performance analysis
• Heat exchanger design and analysis
• Component qualification, certification test
• System test and certification
• Part 25 and DO-160 - Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-189
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 01/05/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling Systems Engineer

Description:
Candidate should have experience with: - Aircraft environmental control systems (ECS) - Specialized onboard equipment cooling systems, including - Liquid cooling systems - Air cycle systems - Vapor cycle systems - Cooling system performance analysis - Heat exchanger design and analysis - Component qualification, certification test - System test and certification - Part 25 and DO-160 - Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services
 
Job Number: 104343
Job Location: Savannah, GA
Input Date: 07/12/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling Systems Engineer

Description:
ECS Cooling Systems Engineer

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First
**MUST be a U.S. CITIZEN**

Unique Skills:
Candidate should have experience with:
- Aircraft environmental control systems (ECS)
- Specialized onboard equipment cooling systems, including
- Liquid cooling systems
- Air cycle systems
- Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification, certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting development/production of Company products/services.

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works w/out appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7624
Job Location: Savannah, GA
Rate: 70-77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/12/2017
Last Updated: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
Applicant shall:
- Develop and maintain Electrical Wiring Interconnect System (EWIS).
- Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
- Must be capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services .

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7133
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/17/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -EWIS -Cabin interior monuments -Seats

Education/Experience
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-175
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Requirement #AERO-REQ-0578
Work location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 06/27/2017
End Date 01/31/2018
Number of Resources1
Security Clearance Secret (Prime Contract: Circle A, Can start w/o clearance: No, Interim Clearance Sufficient: No)

Title: Electrical Engineer-N
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on electrical schematic design and Generator Control Unit (GCU) integration for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.
Skill/Experience/Education
Mandatory:

Experience creating electrical schematics and developing aircraft electrical power systems. Secret Clearance with investigation within the past five years.
Desired:

Experience with Generator Control Unit (GCU) integration. Experience with Mentor Graphics Capital Harness; Experience designing analog circuit logic. Experience with CATIA V5.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Elecrical Circuit Design Perform analog circuit logic and schematic design. 9-10 Years Yes
Electrical Power System Design Design aircraft Electrical Power Systems, specifically Generator Control Unit integration. 6-8 Years Yes



Interview Required Yes
OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt
 
Job Number: JE-0578
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 7 month contract
Input Date: 09/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
• Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
• In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
• Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
• Extensive knowledge of EWIS component selection criteria;
• Experience with Mentor Graphics Capital Harness System (CHS)
• Preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
Position Purpose
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services. Principal Duties and Responsibilities
Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
Additional Functions
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-185
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 06/12/2017
Last Updated: 08/28/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 7231
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/23/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term Contract



Unique Skills:
Applicant shall:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7031
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 08/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift


Unique Skills:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6951
Job Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
Applications Engineer Vice Installation
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education/Experience: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Company products and services .

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7517
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/19/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness installation Engineer

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-676-94842
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power/Loads Engineering Contractor-Special Missions

Description:
Electrical Power/Loads Engineering Contractor-Special Missions
Savannah, GA
Rate: $58-$63

Unique Skills:

Required Experience in the following:

Electrical Power Generation, control and indicating Power Distribution, control and indicating Electrical Load Analysis Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Job Description.

5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline Desired Experience in the following: Working Knowledge ARP4754 and CFR 25 Project Management Skills/Experience Configuration change management
 
Job Number: 7526
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/13/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design-Aircraft Interiors Engineering Contractor TSII

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-738-104881
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/24/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design/Aircraft Interiors Engineering Contractor

Description:
Electrical Systems Design/Aircraft Interiors Engineering Contractor

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related advanced degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works under minimal direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7518
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/08/2017
Last Updated: 08/16/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical. FLT CNTRL/SIM. LABS

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 16-604-1396
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer

Description:
Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASASP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineering Contractor

Description:
Electronics Systems Engineering Contractor

Location: Savannah, GA
Pay Rate: $55/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Aircraft power / electrical / avionic systems design, integration and implementation.
-Design, certification and system support

Job description:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7054
Job Location: Savannah, GA
Rate: 55.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/13/2017
Last Updated: 07/31/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 06/21/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt



Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have active / transferable Secret Clearance prior to submittal and shown on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework
Desired:

Domain Knowledge of Air and Missile Defense

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: JE-1368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159151/1366
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: JE-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/18/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159150/1367
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
Desired:

Driver Development, Python, ROS, CODESYS

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
COTS SBC 0-3 Years Yes
Linux (Red Hat) 4-5 Years Yes
VxWorks 4-5 Years Yes
Git 4-5 Years Yes
J1939 or CANBus Experience 4-5 Years Yes
Eclipse 4-5 Years Yes
Ground Vehicles and Autonomy Experience 4-5 Years Yes
Embedded SW Engineering 4-5 Years Yes
Driver Development 0-3 Years No
Python 0-3 Years No
CODESYS 0-3 Years No
ROS 0-3 Years No
 
Job Number: JE-1367
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 07/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis - 3 / no clearance / CA

Description:
1597
Engineer Structural - 3 (Job Number: 17011443)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 12, 2017

Engineer Structural - 3 (3)

Pay Rate: $53 - $55/hr.

Work Schedule: 9/80

Location: El Segundo

Duration: 1 year

The successful candidate shall be able to perform stress analyses of metallic and composite aircraft structures. The position requires knowledge of aircraft stress. The position will require the performance of static of metallic and composite airframe structure using classical ‘hand’ methods and also using automated methods and procedures approved for the program. Required skills include the ability to manipulate and pull loads from the Global Loads Models, and to build and apply loads to local breakout models. The stress analyst shall ensure that designs meet program requirements for strength, durability, and damage tolerance, and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives . The analyst should work well in a team environment and create high quality analysis reports and presentations.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

•Proficiency with NASTRAN, Patran, FEMAP, and Matlab
•Experience in composite structural test applications
•Advanced knowledge in durability and damage tolerance analysis methods
•Complete understanding of structural analysis techniques, concepts and practices
•Excellent written and verbal communication skills
•Must be a self-starter and be able to handle multiple tasks in parallel


Preferred Qualifications:

•Experience with layout sizing and structural integrity evaluations of primary and secondary structure
•Experience working in a liaison engineering environment, resolving MRB issues
•Experience working on military aircraft
 
Job Number: MB-17011443
Job Location: El Segundo, CA
Rate: 53-55/hr
Duration: 1 year
Input Date: 08/22/2017
Last Updated: 08/22/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/FEMAP

Description:
Engineering Contractor/FEMAP

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
The ideal candidate will have experience in the following:
- Use of finite element analysis for both primary and secondary aircraft structures, including interior monuments
- Static and fatigue analysis of primary and secondary aircraft structures of metallic and/or composite construction in a product development environment
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certifications of aircraft installations
- A working knowledge of FAR part 25 and EASA CS certification requirements
- A good understanding of a fast paced completion style environment
- Working knowledge of FEMAP is required

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7355
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes Split
Overtime: Possible
Duration: LT
Input Date: 04/25/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
- Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
- Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
- CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7224
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Last Updated: 10/09/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Long Term contract


Unique Skills:
- This position requires experience with the design, installation, and certification of aircraft systems and equipment.
- Experience with composite layups and water/waste systems is a plus.
- The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations.
- The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification.
- Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7090
Job Location: Savannah, GA
Rate: $60-$65
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with water/waste systems or fluid systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The candidate should also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7424
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift

Unique Skills:
- This position requires experience with the design, installation, and certification of aircraft systems and equipment.
- Experience with composite layups and water/waste systems is a plus.
- The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations.
- The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification.
- Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7421
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer TS II

Description:
UNIQUE SKILLS
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with water/waste systems or fluid systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The candidate should also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-734-101989
Job Location: Southeast
Rate: $60.00 to $63.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer TS II

Description:
UNIQUE SKILLS
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with composite layups and water/waste systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-735-94081
Job Location: Southeast
Rate: $60.00 to $65.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-014
Job Location: Greensboro, NC
Rate: $62-$72/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer - Dynamics

Description:
External Loads Engineer - Dynamics

Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Long Term contract


Unique Skills:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
- As an Engineering Consultant in Flutter & Dynamic Loads, you will:
• Provide solutions for aircraft flutter and vibration problems
• Analyze aircraft structural dynamic response and load distributions for gust, landing, taxi, and crash landing conditions
• Analyze aircraft for flutter and determine flutter margins.

- What you'll bring to the team:
• Knowledge of aircraft aeroelasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling desired including static to dynamic model conversion
• Experience with MSC Nastran and Patran or a comparable application
• Experience with ground tests such as ground vibration tests or landing gear drop tests
• Experience with flutter flight testing
• Experience with dynamic analyses such as aircraft crash landing or engine fan blade out is a plus
• Experience with aeroservoelasticity is a plus

- What the Loads & Dynamics team does:
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 5939
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 07/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Management Systems Specialists - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Flight Management Systems Specialists for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Responsibilities include preparation of the contents of the navigation databases and supporting client aircraft and flight simulators on a daily basis
• Process the aircraft navigation databases and coordinate the distribution with MCC every 28 days
• Maintain compliance with applicable FAA criteria and our client's Operations Policy and Procedures
• Coordinate with various departments and outside agencies including the FAA on navigation errors and revisions
• Exercise a constant safety conscious behavior in all operational processes and procedures
• Position also involves direct support for shop, hangar, simulator, and line operations in troubleshooting and providing corrective actions pertaining to the navigation database
• Provides assistance for any navigational issues
• Process the aircraft/simulator navigation databases every 28 days
• Identify changes and ensure accuracy of any changes in each cycle
• Ensure appropriate distribution to aircraft maintenance and simulator support for loading prior to deadline
• Anticipate changes to fleet database requirements including off-cycle runs and the effects on cost
• Works to reduce costs when possible
• May attend industry meetings to focus attention on issues and outcomes beneficial to our client

Qualifications:

• Requires a bachelor's degree in related field, at least five years of aviation industry experience and proficiency using MS Office Suite required with emphasis on MS Access, Excel and Word
• Should possess technical expertise in subject areas of aviation communications, navigation, and surveillance architecture
• Should have excellent oral and written communications skills
• Interfaces with many levels within Flight Operations, other divisions within our client, industry groups, database content suppliers and representatives from other airlines
• Working knowledge of Flight Operations and Tech Ops organizations preferred
• Background in engineering or aircraft maintenance preferred (A&P, FCC licensed)
• Pilot ratings and flying experience are desirable
• Must be performing satisfactorily in current position

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39243
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer-Stability & Control

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years’ experience in flight sciences, including:

Stability & Control
Aircraft Performance
6DOF Flight Simulation
Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 07/13/2017
Last Updated: 07/26/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/14/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Location: Savannah, GA
Pay Rate: $56/hr - $67/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
-Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
-Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6952
Job Location: Savannah, CA
Rate: 56-67
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/12/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer -

Description:
JSG is looking for Flight Test Engineer in West Palm Beach for a 15 month contract!

Description:

Plan, conduct, manage, and report on Powerplant and related propulsion systems helicopter ground and flight tests.
These tests include thermal surveys, fire extinguishing and suppression system evaluations, determination of installed engine power, inlet and exhaust surveys, and characterization of engine-airframe compatibility together with FADEC-based control systems, fuel systems, environmental control systems, and icing / snow evaluations.
Test planning involves determining measurement requirements, developing an overall test approach, and defining maneuvers and conditions for which data is to be obtained in order to meet test objectives in a safe and efficient manner.
These details are written into published test plans.
Test conduct involves coordination with instrumentation and aircraft operations personnel, briefing flight and ground crews, and monitoring tests in real-time using telemetry. Large volumes of flight data are processed and analyzed.
Post-test reports documenting the flight test results are developed and presented to the qualifying or certificating authorities.
Possible relocation to Pax River, MD facility.

Experience/Education Required:

Minimum 7+ years experience in Flight Test Minimum Bachelors' of Science in AE or ME
 
Job Number: 356470
Job Location: West Palm Beach, FL
Rate: $64hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics & Landing Gear Engineer

Description:
Hydraulics & Landing Gear Engineer

Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
As a Hydraulics & Landing Gear Engineer (TSII) you will be responsible for installations for aircraft systems with an emphasis on hydraulics and landing gear.
- Qualified candidates must have experience with component requirement definition, qualification testing, and supplier management.
- In addition to experience with hydraulic system and hydraulic component design, the ideal candidate would have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- Must be able to interpret and generate system schematics and should have experience aircraft integration with multiple other aircraft design organizations.
- Experience with ARP 4754A, the ability to create/decompose requirements, and the V & V on these requirements is preferred.


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7426
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics/Landing Gear Engineer

Description:
• As a Hydraulics & Landing Gear Engineer (TSII) you will be responsible for installations for aircraft systems with an emphasis on hydraulics and landing gear.
• Qualified candidates must have experience with component requirement definition, qualification testing, and supplier management.
• In addition to experience with hydraulic system and hydraulic component design, the ideal candidate would have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
• Must be able to interpret and generate system schematics and should have experience aircraft integration with multiple other aircraft design organizations.
• Experience with ARP 4754A ,the ability to create/decompose requirements, and the V & V on these requirements is preferred.
 
Job Number: 24-182
Job Location: Savannah, GA
Rate: $60-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ITF Design Engineering Contractor II

Description:
UNIQUE SKILLS
CATIA V5, SmarTeam, Sheetmetal Design, Bolt Joint Design, client sustaining and AAP aircraft systems a plus, 3D prototyping experience a plus, SharePoint experience a plus

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelor’s degree. Experience credit will be considered for related advance degrees limited to 2 years for Master’s Degree and 4 years for PhD in fields applicable to this job position.

POSITION PURPOSE
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of client aircraft.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones
3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
4. Ability to convey technical concepts in both written and verbal formats
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
6. Works under general supervision for routine tasks of minor complexity
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 17-753-104385
Job Location: Southeast
Rate: $45.00 to $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Systems Engineers

Description:
Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

We are seeking Landing Gear systems Engineers to work with our client on a new commercial aircraft flight test certification program.

Essential functions:
� Landing Gear System requirements verification and validation (ARP4754).
� Prepare and review test specifications, procedures and test reports.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Provide engineering input to technical reviews
� Identify and communicate technical risks for the landing gear system
� Support overall certification effort for the landing gear system

Desired Qualifications:
� Aircraft flight test certification program experience.
� Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
� Knowledge of materials, mechanical systems, and failure mechanisms
� Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Yes, straight time
Duration: LT
Start Date: NOW
Input Date: 07/13/2017
Last Updated: 07/26/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Support Analyst (LSA)

Description:
Logistics Support Analyst (LSA) position is responsible for performing day to day activities in support of the U.S. Navy Marine One helicopter for the VH-92 Presidential Helicopter Replacement program. The LSA Analyst position requires proactive communication with the various disciplines in an Integrated Product Team (IPT) environment and the ability to bring forward technical and logistics issues/resolutions to the team.
Responsible for delivery of LSA data including, but not limited to, Level of Repair Analysis (LORA), Maintenance Task Analysis (MTA), and Reliability Centered Maintenance (RCM) Analysis to VH-92 internal and external customers in accordance with cost, schedule, quality and technical performance requirements as agreed to by contract.
-Support contract proposal initiatives by providing estimates as required for modifications and/or newly developed aircraft components.
Ensure authorized technical review/acceptance review of analyst/subcontractor submitted packages to ensure compliance with statement of work, Engineering source data and departmental quality plan.
The LSA Analyst will be the primary interface between the IPT and the Logistics community.

Skills & Experience:
Seeking candidates with:
5 – 10+ years’ experience, proficient working in SAMS database
S-92A aircraft knowledge/experience preferred
Knowledge of Rotary craft Technical Publications
Experience in Logistics/Aircraft maintenance preferred.
Strong project management skills.
Demonstrate high level of interpersonal skills.
Communicate with all customers on a professional basis.
Be familiar with at least one of the following: MIL-STD 1388 or GEIA-STD-0007.
Able to interpret technical instructions and blue prints.
Able to interpret S,M, & R code breakdown.
Able to work to a delivery schedule.
Able to adapt to change at a quick pace
 
Job Number: 1693
Job Location: Stratford, CT
Rate: Open
Per Diem: Open
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 07/10/2017
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for a Integrated Planning & Scheduling Spec 5

Description:
Integrated Planning & Scheduling Spec 5

Location: San Antonio, TX
Duration: 6+ months

POSITION COMMENTS: Looking for a Master-level Aircraft Production Scheduler to develop and maintain aircraft maintenance and modification schedules.

Job Description:
This position is the Lead Integrator for the Master Production Schedule (MPS) on Executive Transport Services and Support located in San Antonio, Texas. This position has primary responsibility for the Program Master Production Schedule and will serve as the technical lead for the IP&S team in developing, integrating and maintaining the MPS and supporting detail schedules. This position will work closely with the IP&S team and program leadership to ensure alignment and integration of the MPS with other key program plans and schedules such as the Integrated Master Schedule (IMS), Master Phasing Plan, High Level Flow (HLF) and detailed schedules below the IMS.
- Leads the preparation, development and integration of highly complex Master Production Schedules including supporting elements such as facilities, tooling, parts fabrication, parts procurements, and assembly, modification, maintenance, integration & test and flight operations in order to meet all business offers, project or program execution objectives.
- Performs high-level capability and capacity visibility of key resources. Formulates comprehensive recommendations and presents summary to Program and Executive Leadership.
- Coordinates status for the Master Production Schedule as well as supports risk analysis for projects, programs and change activities
- Performs what-if analyses to determine impacts, constraints and plans involving product development, production rates, process improvement, or program initiatives.
- Performs integration of the Master Production Schedules, horizontally and vertically with the Program Master Schedule, to include Site and Supplier information.
- Works with key stakeholders to develop recovery plans, while ensuring Program schedule baseline control.
- Facilitates oversight & implementation for change requirements while ensuring commitment of stakeholders while maintaining disciplined revision control of all schedule baselines. Facilitates multidisciplinary review of proposed Production schedule changes to the baseline. Negotiates and resolves issues. Advises and recommends integrated scheduling, change and baseline management best practices, processes, techniques and tools to management.
- Develops and posts scheduling and change related metrics & reports.
- Provides high level analysis of product development initiatives for Production.
- Oversees program planning requests for the development of new and derivative products.
- Develops strategic plans for realigning work statement to support production schedules while meeting company goals for inventory management.
- Provides recommendations to Program Operations / Program leadership in regards to integrated Master Production Scheduling related issues.
- Provides coaching, mentoring and leadership to lower level employees. Provides subject matter expertise in the development, implementation and training of processes and tools.



Skill Code: W2A-Integrated Program Scheduling

Skills:
Category Name Required Level
Areas of Expertise MS Project Yes Intermediate
Areas of Expertise Production Yes Advanced
Areas of Expertise Project Scheduling Yes Intermediate

Education / Experience:
Bachelor's degree and typically 15 or more years' related work experience, a Master's degree and typically 13 or more years' related work experience or an equivalent combination of education and experience.
 
Job Number: 17-11652
Job Location: San Antonio, TX
Per Diem: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/29/2017
Last Updated: 07/17/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
Maintainability Engineer III

Location: Savannah, GA
Rate: $63.00 - $67.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and
2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications.
3) Catia skills highly desirable.


Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.


Position Purpose:
Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:
Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 7572
Job Location: Savannah, GA
Rate: $63.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 06/26/2017
Last Updated: 09/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
Maintainability Engineer III

Location: Savannah, GA
Rate: $50.00 - $60.00/hr
Duration: Long Term contract
Shift: 1st Shift


Education and Experience Requirements:
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:
Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.
 
Job Number: 7455
Job Location: Savannah, GA
Rate: $50.00 - $60.00/hr
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com