Job Search Results

206 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/06/16 Sunday 10:33AM Pacific Time by ContractJobHunter. )

Listings 1 - 206

Go To My Job Tracker

Expand all descriptions

5 Manufacturing Engineer II Needed

Description:
Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibillity studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.




The Structures Company is an AA/EOE.
 
Job Number: 311
Job Location: GA
Rate: $52.50/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 06/14/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Designer Creo (336)

Description:
*This is a full-time, 6-9 month contract position located in Grand Prairie TX*

We are seeking a skilled tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, such as Creo and Windchill, along with GD&T

Required:
*8+ years experience in tool design using Creo/Windchill.

*Strong GD&T

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.
*Must be able to get a clearance upon starting, which requires US Citizenship



Preferred:

*Active Secret Clearance
*SAP experience
 
Job Number: 336
Job Location: Grande Prairie, TX
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Airport Engineer 4

Description:
Chipton-Ross is seeking an Airport Engineer 4 located in Seal Beach, CA.

RESPONSIBILITIES:
Provides expertise in aircraft/airport compatibility issues to include airport operations, pavement roughness and strength analysis and aircraft pavement loading. Compares airplane configurations with airport operations and infrastructure to identify incompatible airplane or airport features. Performs on-site tests to validate airport pavement roughness and strength. Analyzes and documents airport infrastructure and provides recommendations for improvements. Conducts trade studies of product development airplane design characteristics and provides recommendations on configuration changes to improve airport compatibility. Surveys and documents airport infrastructure and provides recommendations for improvements. Participates in airport-related conferences, regulatory and industry meetings to disseminate trends and effect regulatory and airport infrastructure changes to improve compatibility with client aircraft. Coaches and trains others. Work under minimal direction.

REQUIRED EXPERIENCE:
Computer Aided Design (CAD) - Preferred - Intermediate
Master Planning - Preferred - Intermediate
Communication Skills - Preferred - Advanced
Planning and Organizing Skills - Preferred - Advanced
Relationship Building - Preferred - Advanced
Strong Leadership Skills - Preferred - Advanced
Team Player - Preferred - Advanced
AutoCad Intermediate Preferred - Intermediate
Communications - Preferred - Advanced
Experienced with Global Regulatory Requirements - Preferred - Intermediate
Project Management - Preferred - Advanced
Systems Analysis & Design Skills - Preferred - Intermediate

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
7:00 AM - 3:30 PM

Domestic travel and International Travel Required


 
Job Number: 177070
Job Location: Seal Beach, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/12/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 06/14/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.
CAD Designer
(US Citizenship Required*)
Marion, VA
2019-8780

Responsibilities:
• 3D design and modeling of mechanical hardware
• Applying 3D dimensions and text to 3D models using the FT&A module
• (3D-Model Based Definition)
• Generating 3D-PDF files using Anark software
• (training will be provided)

Qualifications:
• Succesful completion of a background check and drug screen is required.
• Strong mechanical design background
• Proficient in the Catia V5, Part Design module
• Proficient in the Catia V5, Assembly Design module
• Proficient in the Catia V5, Generative Shape Design module
• Proficient in the Catia V5, Functional Tolerancing & Annotation module
• Proficient in GD&T
• ASME Y14.100 Engineering Drawing Practices
• ASME Y14.5 Dimensioning and Tolerancing
• ASME Y14.41 Digital Product Definition Data Practices
• Preferred Skills and Abilities:
o Windchill PDM System
o Mechanical Engineering Degree
o Experience in the manufacture of mechanical assemblies

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's Degree or equivalent is required combined with a minimum of 7 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.


About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8770
Job Location: Marion, VA
Duration: 6 Months
Input Date: 05/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

CAD Designer

Description:
Chipton-Ross is seeking a Technical Design 2 located in Kennedy Space Center, FL.

RESPONSIBILITIES:
Uses 3D Computer Aided Design (CAD) and Manufacturing tools, to develop and maintain mechanical/structural engineering products, environments and trade studies. Prepares design layouts and modifies existing designs to satisfy customer requirements. Assists with the use of 3D laser scanning equipment used for creating as-built and models of large structures and platforms. Develops statements of work, including design requirements, cost and schedule estimates. Contributes to the integration of engineering models across client and NASA customers to provide a functional end-product. Ability to Lead a project and work under low supervision, ability to multitask and ability to work well within a team environment. Mentors less experienced personnel. Works under general direction.

REQUIRED EXPERIENCE:
CAD - Not Required - Intermediate
CATIA V5 - Not Required - Intermediate
CAD - Not Required - Intermediate

EDUCATION:
Accredited AA or BS degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
8::00 AM - 4:30 PM

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

 
Job Number: 177277
Job Location: Kennedy Space Center, FL
Rate: $DOE
Duration: 9 Months
Input Date: 02/20/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

CAD Designer 3

Description:
Chipton-Ross is seeking 10 Technical Design 3's located in Oklahoma City, OK

RESPONSIBILITIES:
Uses manual or Computer Aided Design (CAD) CATIA V5/ENOVIA tools to develop and maintain mechanical/structural engineering product definition. Assists in preparation of basic design layouts. Modifies existing designs. Assists in the coordination50. and development work transfer packages for relevant parties. Verifies accuracy of non-technical data. Investigates and resolves routine manufacturing process or engineering related issues. Supports the maintenance of new processes and procedures by providing input related to routine aspects of the maintenance process. Works under general supervision.

REQUIRED EXPERIENCE:
Must Have Experience creating structural / mechanical designs using CATIA V5 & Enovia.

Ability to work conceptual, preliminary and detailed design including 2D drawings and 3D deliverables

EDUCATION:
Accredited AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
7:30 AM - 4:30 PM
 
Job Number: 177112
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 02/12/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

CAD Designer/Drafter

Description:
 Create detailed designs and fabrication drawings used in the manufacture of various equipment including bill of materials.  Additionally, will create piping flow schematics that are utilized in the construction of piping systems. These detailed technical drawings incorporate the input of engineers, sales and project managers and can specify dimensions, codes, materials, and production methods.    
DUTIES AND RESPONSIBILITES:
  • Develop 3D models and finish drawings from sketches and data provided by Engineers
  • Must be able to visualize, conceptualize and formulate a design in 3D from similar existing designs
  • Ability to learn quickly and work on multiple projects
  • Exercise independent judgment by utilizing the correct design criteria based on knowledge from customer data and project scope
  • Create and assemble documentation packages and produce drawing sets and detailed bill of materials
  • Review customer drawings and other discipline drawings and any existing plan drawings for physical interference and design requirements
  • Provide technical support for project engineers and managers, client inquiries and fabrication requests
  • Effectively communicate with the project engineer, project manager and customer representatives to identify project design requirements
  • Ensure accuracy and completeness of drawings including dimensions, spelling, drafting standards and completeness
  • Must be able to visit job sites and take measurements for equipment design
  • Must have prior experience using Autodesk Inventor software

 

  • Education:  Associate or Bachelor degree in Engineering/CAD Design preferred
  • A minimum of two years CAD experience
  • A minimum of two years 3D modeling experience
  • Possess a strong mechanical aptitude
  • Knowledge of metal plate fabrication and welding preferred
  • Knowledge of integration of laser scan point cloud data into Inventor is a plus
  • Knowledge of iLogic programming a plus
  • Some travel required
  • The ability to work both independently and as part of a team are essential
  • Start date is immediate. 40 Hour work week (Monday- Friday) with some overtime as needed.   

 
 

 
Job Number: 1910099818
Job Location: Smyrna, TN
Duration: 6 months
Input Date: 03/13/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXrqQAE&URLSource=cjhunter

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia Fixture Design Engineer W/Secret Clearance

Description:
*This is a full-time, 6 month contract position located in Lexington, KY*
We are seeking a skilled mechanical engineer who will be designing our manufacturing systems, including fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment. Candidate will analyze sketches, specifications, drawings to determine design factors such as size, shape, and arrangement of parts; oversees the tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, CATIA.



Required:
*9 years experience in machinery or tool design using a CAD package, preferably, CATIA.

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.

*Experience with Teamcenter or similar PDM/PLM software tool
*Active Secret Clearance

*4 year degree



Preferred:

*GD&T knowledge




Requirements


Education BSME
Years of Experience 5
 
Job Number: 660
Job Location: Lexington, KY
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clark
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Civil/Structural Designer

Description:

Designs components or portions of systems, and modifies existing designs to develop or improve them.
 Develops solutions to problems of unusual complexity that require a high degree of innovation and ingenuity. May lead a section or group of designers/drafters, usually on a single project.
  • Responsible for 3D modeling, preparing 2D drawings and drafting checking of process structures and modules, process and electrical equipment foundations for industrial facilities
  • Coordinate with other disciplines to develop design deliverables
  • Will have supervisory responsibility for drafting on project or at a program level
  • Perform material take-off, assemble estimate and construction packages, prepare professional service budgets and schedules, issue construction documents, participate in model reviews
  • Must be proficient in AutoCAD, CadWorx 


Qualifications



  • Minimum of 10-15 years' of experience in civil and structural drafting and design of production facilities required
  • Associate's degree or 2 years of college course work is a plus
  • MS Office skills (Word, Excel, PowerPoint) required
  • Excellent oral and written communication skills required




 
Job Number: 1910101424
Job Location: El Dorado, KS
Duration: 12 months
Input Date: 04/16/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eXcQAI&URLSource=cjhunter

Computer Aided Measuring Specialist 3

Description:
Chipton-Ross is seeking 2 Computer Aided Measuring Specialist 3's for an opportunity in Berkeley, MO

RESPONSIBILITIES:
Performs data collection and analysis using a variety of metrology systems and software and provides assistance to others. Creates complex layouts of major assembly tooling. Analyzes production processes and recommends improvements for productivity and quality. Verifies accuracy of tooling deliverable. Interprets complex engineering definition of parts and/or assemblies. Develops and/or recommends manufacturing techniques and associated fabrication devices. Creates machine commands for two and/or three axis machines. Installs and assists with maintenance of software. Assists in troubleshooting and repair of system hardware and software. Assists in the development of measurement plans and performs data collection and analysis. Creates two-dimensional CAD models. Works under general direction.

EDUCATION:
Accredited Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
7:00 AM - 3:30 PM

 
Job Number: 178628
Job Location: Berkeley, MO
Rate: $DOE
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Drafter / Designer

Description:
PDS Tech is seeking a Drafter / Designer in Phoenix AZ.
 
The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints.  These may include utilization of computer aided design applications.
 
Required:
  • Must be familiar with ASME Y14.100 and its interpretation.
  • Experience with Geometric Dimensioning and Tolerancing (GD&T)
  • Ability to incorporate red-lines to original drawings from shop drawings.
  • Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
  • Capable of creating complex 3D model parts and assemblies.
  • Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
  • Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
  • Pro/E Wildfire 5 / Creo Elements 1.0 or higher
  • Keycreator / Cadkey (other 2D CAD tools acceptable)

Candidate must have an Associates’ degree or higher


 
Job Number: 1910100044
Job Location: Phoenix, AZ
Duration: 6 months
Input Date: 03/28/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYV4QAM&URLSource=cjhunter

Drafter / Designer

Description:
The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints. These may include utilization of computer aided design applications.

Required:
• Must be familiar with ASME Y14.100 and its interpretation.
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• Ability to incorporate red-lines to original drawings from shop drawings.
• Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
• Capable of creating complex 3D model parts and assemblies.
• Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
• Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
• Pro/E Wildfire 5 / Creo Elements 1.0 or higher
• Keycreator / Cadkey (other 2D CAD tools acceptable)

Candidate must have an Associates’ degree or higher
 
Job Number: 1910100044
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 06/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: sspolzino@pdstech.com
Website: www.pdstech.com

E-Drive Integration Engineer

Description:
PDS Tech, Inc. is seeking an E-Drive Integration Engineer in Auburn Hills, MI.

Summary:

  • E-Motor hubs packaging verification, and release for prototype and production to specific customer applications.
  • Verifies torque control, power management, and thermal management of the E-Motor hubs and e-drive system.
  • Testing and validation of motor control and motor sensor subsystem requirements.
  • Diagnoses and corrects deficiencies in designs and prototypes.
  • Understands test machine requirements and instrumentation.
  • Support for motor control and motor sensing subsystem analysis, modeling, and design.
  • Design and optimizes the e-drive system including packaging and development of CVT in cooperation with the supplier.
  • Dynamic lean design and optimization
  • Designs and optimizes simultaneous system performance goals through requirements flow down.
  • Effectively integrates all aspects of a design using multi-disciplinary engineering.
  • Understands and creates system and subsystem specifications.
  • Assists in maintaining cost controls.
  • Familiar with preliminary analysis and simulation to detect stresses conditions on subsystems and on component design level.
  • Experience with design, development, validation and integration.
  • Basic skills in analysis and simulation parameters to set up through the CAD models. Familiar with the mains manufacturing processes: sand casting, die casting, injection plastic components, sheet metal forming, gravity casting.

Qualifications / Education:
  • BS in Electrical Engineering or Mechanical Engineering required with emphasis in electric machines and drives, magnetic sensing subsystems, embedded systems, and/or electromagnetics preferred.
  • Five years’ experience working with e-drive systems.
  • Strong computer skills and knowledge of design and simulation tools (e.g. Catia V5, NX,) is required.
  • Able to generate 3D math models and 2D prints for complex parts.
  • General competency in all core fields (electronics, electromagnetics, computer hardware and software) is preferred.
  • Excellent problem-solving techniques.
  • Knowledge of system synthesis, analysis and verification techniques.
  • Good organization and documentation abilities.
  • Must be able to view a computer screen or monitor for extended periods of time.
  • Must be able to sit or stand for extended periods of time.

 
Job Number: 1910102061
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/07/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjZQAQ&URLSource=cjhunter

Ejection Seat Test Engineer

Description:
PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
 
We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
 
The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




 
Responsibilities:
  • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
  • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
  • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
  • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
  • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
  • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
  • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
  • Facilitate and execute necessary testing to ensure product safety.
  • Interact with Program Management to ensure customer satisfaction.
  • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
  • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
  • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
  • Adhere to all rules and codes of conduct.
  • Perform other duties as required.

Skills Required:

  • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
  • Detail oriented and thorough in all assigned tasks
  • Innovative and driven to complete all assigned tasks to the project schedule.
  • Strong customer skills and customer focus (both internal and external customers)
  • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
  • Ability to work independently or as part of an integrated product team.
  • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
  • 100% dedicated to following all safety procedures and precautions.
  • Excellent interpersonal skills.
  • Excellent written and verbal communication skills
  • Ability to present test solutions
  • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

Education:

  • Bachelors.

 
Job Number: 1910101206
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 04/17/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

Electrical Designer

Description:

This individual works in conjunction with the Electrical Engineer and is Responsible for detailed design and documentation
of electrical power and control wiring, instrumentation loops, electrical schematics, cable tray layout, instrumentation and
electrical details, and cable schedules. 10+ years of CAD design/drafting experience, with a good background in instrumentation
and control system design. AutoCAD experience preferred.



This individual works in conjunction with the Electrical Engineer and is Responsible for detailed design and
documentation of electrical power and control wiring, instrumentation loops, electrical schematics, cable tray layout,
instrumentation and electrical details, and cable schedules. 10+ years of CAD design/drafting experience,
with a good background in instrumentation and control system design. AutoCAD experience preferred.


 
Job Number: 1910100469
Job Location: Mount Vernon, IN
Duration: 6 months
Input Date: 03/28/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cBDQAY&URLSource=cjhunter

Electrical Engineer

Description:

PDS Tech is seeking an Electrical Engineer in Florence SC.



 



The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.



 



This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments. 



 



The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions.  Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.


Experience/Qualifications:
  • MA/MS degree with 1 to 2+ years’ experience BA/BS degree with 2 to 5+ years’ experience.

Preferred Skills:

  • Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic.
  • Control System Logic and Power Electronics.
  • Ability to work with suppliers/3rd parties.
  • Experience with test and measurement equipment.
  • Understanding of mechanical and software functions. 
  • ECAD tools (Cadence, E3, or others). 
  • Strong communications skills and leadership ability. 
  • MS Office applications (Word, Excel, Power Point, etc.).

 
Job Number: 1910102093
Job Location: Florence, SC
Duration: 7 months
Input Date: 05/15/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gmOQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Candidate must possess an Active Secret Security Clearance
Job Responsibilities:
Candidate will evaluate, select, and apply electrical engineering methods, techniques, procedures and criteria, using independent judgment in making adaptations and modifications.
Candidate will perform work which involves the preparation, interpretation or review of specifications, plans, associated with C2 systems or equipment.
Candidate will conduct electrical systems analyses and design calculations.
Candidate will prepare designs, drawings and data.
Candidate will prepare engineering studies and reports.
Candidate will use engineering Computer Aided Design/Computer Aided Engineering (CAD/CAE) tools.
Job Qualifications:
Candidate is desired to have a Bachelor of Science degree in a related field.
Candidate is desired to have experience with the Integrated Air and Missile Defense (AMD) as well as Army/Joint Command and Command (C2) systems.
Candidate must have good writing/communications skills as well as being able to interface with internal and external customers and users.
 
Job Number: 34884
Job Location: Huntsville, AL
Duration: TTH
Input Date: 05/06/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

Electrical Engineer

Description:
PDS Tech Inc is seeking an Electrical Engineer, in Wichita, KS    
  • Job Responsibilities: 

    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft. 

    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. 

    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome. 

    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents. 

    • Maintain a high degree of proficiency in computer applications to accomplish tasks. 

    • Coordinates with direct and indirect customers and suppliers to determine system requirements. 

    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues. 

    • Consults with supplier to discuss and remedy issues in a timely and efficient manner. 

    • Provides guidance to lower grade engineers in the solution of complex design problems. 

    • Reviews and evaluates supplier proposals for potential utilization on future models. 

    • Performs above work utilizing frequent application of in-depth engineering principles. 

    • Assures supervision awareness of program status, problems and successes. 

    • Provides periodic design reviews and update presentations to management of engineering and other company organizations. 

     
  • Education/Experience: 

    • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required 

    • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired 

    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs 

Qualifications: 

• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred 
* Experience with DO-178
* Experience with LDRA


• Ability to read and produce wiring drawings using standard industry practices 

• Experience with electronic test equipment 

• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred 

• Skills in Microsoft Office suite software 

• C/C++ and assembly programming experience preferred 

• Visual Programming language preferred 

• Excellent written and verbal communication skills 

• Strong analytical and problem solving skills
 
Job Number: 1910101471
Job Location: Wichita, KS
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eqEQAQ&URLSource=cjhunter

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 06/14/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

Description:
164950/1764
Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 17, 2019

Target End Date: Dec 20, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 12-20-19

3 Openings

Client is seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



Qualifications


Basic Qualifications:

Bachelor of Science degree in STEM discipline.

9 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
 
Job Number: JK-1764
Job Location: Melbourne, FL
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/12/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV

Description:
Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**Candidates should have experience specifically with flight electronics packaging for space applications**
**Candidates should have design experience of electro-mechanical packaging or cable harnesses**

Duties:
- Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs
- Candidates should have experience specifically with flight electronics packaging for space applications
- Candidates should have design experience of electro-mechanical packaging or cable harnesses
- Perform engineering design tasks related to space electronics based products.
- Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

Skills:
- Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
- Proficiency in generating drawings is required.
- Familiarity with aerospace/defense engineering design and production processes and disciplines.
- Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
- Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
- Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
- Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Education:
- Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics.
- Willing to accept experience in lieu of Bachelor's Degree.
 
Job Number: 10655
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/20/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate will: •create manufacturing assembly documentation and concept tools and provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
•ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
•be able to perform cost estimates, work to schedules, and write procedures and policies.
•be able to review drawings and concepts and resolve producibility concerns.
•provide technical support to the manufacturing facility as well as to the external suppliers.
•support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
•be able work well in an integrated product development/ design environment.
•present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
•possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications •Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications •Candidate must have 0-2 years of experience working on the manufacture of complex mechanical systems.
•Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Desired experience •working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
•Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
•Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
•Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910099444
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/02/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing /Fabrication Weld Engineer

Description:
*This is a full time, 12+ month contract position located in Sterling Heights, MI*



We are hiring for a Manufacturing / Fabrication Weld Engineer who will be designing, developing, analyzing implementing and testing new military armored vehicle components, chassis and systems. The position involves using advanced modeling and analysis tools to develop product specification, model, data package and integration / verification.



Duties may include design and testing, performing project management duties such as ensuring cost, quality and items are produced and shipped on schedule, creating documentation, working with and creating models and drawings, sharing test results and documentation with management and stakeholders, ensuring all products meet or exceed military specifications.



Required:
*5 years' experience in large item Production Fabrication / weld engineering.

*Experience with GMAW, GMAW-P, and automated/mechanized processes (Aluminum/ Steel)

*Experience working to AWS D1.1, D1.2 specs

*Experience with CAD programs (Pro/E wildfire a +)

*4 year Engineering degree



Pluses:

*Knowledge of PQRs and WPSs

*DoD or similar experience

*AWS/CWI certification

*Knowledge of nondestructive testing scope

*LEAN, 6 sigma or Black/Green Belt understanding

*Understanding of military and commercial design standards and working specifically with military vehicles
 
Job Number: 638
Job Location: Sterling Hts, MI
Input Date: 05/08/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Tulsa, OK.

Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 


 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. 
 



Unique Skills:



Experience in a composite fabrication/bonding environment preferred.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


 
Job Number: 1910100438
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 03/25/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033c7pQAA&URLSource=cjhunter

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 


Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. 
 



Unique Skills:Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software. Preferred Manufacturing Planning experience.


 
Job Number: 1810092024
Job Location: Savannah, GA
Duration: 6 months
Input Date: 03/13/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f1hSAAQ&URLSource=cjhunter

Manufacturing Engineer

Description:
JSG is hiring a Manufacturing Engineer for a 15+ months contract opportunity in Bridgeport, CT!

Description:

The Airframe Process Engineer is required for 2nd shift to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning. The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs. Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing a produciblity review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications. Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations. The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.

This position reports to Process Engineering Black Hawk Lead
This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment. Good communication skills are required.
5+ years of Airframe Process Engineering required. The candidate must be proficient in all processes associated with Airframe Process Engineering. Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
Candidate must be flexible in regards to work schedule and willing to support off shifts and weekends.
BS in Mechanical Engineering, Aerospace or Manufacturing Engineering required
Travel: 10% Travel Required
 
Job Number: 372954
Job Location: Bridgeport, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 06/14/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
**Position requires U.S. Citizenship.**

The Manufacturing Engineer (ME) is responsible for the technical design, maintenance, and development of new and existing electromechanical production lines for a diverse portfolio of product offerings. The Manufacturing Engineer will establish electromechanical manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling, and materials. Solving tactical production problems, designing and documenting assembly & validation equipment and procedures, and providing a key engineering service to production for fulfilling business targets and tracking metrics is expected from this position. The Manufacturing Engineer functions as a champion for continuous process improvement, applying the key principles of Lean & Six Sigma and plays a key role in support of the Quality Management System. This position may include supervision of other manufacturing engineering personnel as the needs of the department require.

Major Responsibilities:
Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment. Confers and collaborates with fabricators, suppliers, assemblers and technicians.
Creates, documents, and implements assembly and validation mechanical fixtures, tooling, and equipment for manufacturing requirements.
Responsible for creating product cable drawings and specifications working with design engineers.
Partners with other engineers, such as software engineers, mechanical engineers, electrical engineers, to ensure all product and system requirements are taken into account from the initial product conception to the finished result.
Contributes to the process of design for manufacturing (DFM), design to cost (DTC).
Design, develop, and document new product mechanical & electromechanical production tests to verify functionality and quality.
Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout to reduce costs and cycle time while maintaining high standards of quality (yield, out-of-box, etc.).
Create and maintain daily, weekly, and monthly metrics reports for production personnel, supervisors, managers, and site leaders as required.
Identify, document, and perform preventative maintenance on manufacturing equipment as necessary.
Participate in design reviews to ensure good manufacturing and serviceability requirements are met.
Implement and oversee procedures to meet regulatory agency requirements to ensure safety, environmental, and design standards are met.
Create and maintain Production Standard Work documents for new and legacy parts and assemblies.
Provides training to Manufacturing personnel.
Supports day-to-day Operations through sustaining engineering. Investigates and solves problems affecting production.
Develop Bills of Material, Purchasing Specs, Assembly Methods, Validation Protocols and Reports.
Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
Basic Hiring Criteria:
A minimum of a BS in Mechanical Engineering is required for this position.
A minimum of one years verifiable related work experience is required for this position.
Desired Qualifications:
Excellent computer skills with strong proficiency in Windows™ interface, Microsoft Office™ package (Microsoft Outlook®, Microsoft Excel®, Microsoft Word®, Microsoft PowerPoint®, Microsoft Access®), Microsoft Project and knowledge.
Exceptional interpersonal, leadership and decision making skills.
Excellent analytical, project management and organizational skills with keen attention to detail.
Strong written and verbal communication, and presentation skills.
Must be able to exhibit a positive attitude and communicate clearly and effectively, and, most importantly, promote collaboration among the team by listening intently to what others are saying, taking time to understand the points being made, asking questions when appropriate, and allowing others to speak without interruption.
Experience in electromechanical production environments solving manufacturing assembly related issues.
Experience in Kaizens and lean manufacturing techniques is a plus.
Experience using CAD software for mechanical design is a plus.
Six Sigma Green Belt certification or equivalent experience is a plus.
Experience using MRP software is a plus.
 
Job Number: 33119
Job Location: Ayer, MA
Duration: TTH
Input Date: 05/14/2019
Last Updated: 05/23/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have an Bachelor's Degree****

Job Description:
- This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.
- Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
- Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
- Must be able to perform cost estimates, work to schedules, and write procedures and policies.
- Must be able to review drawings and concepts and resolve producibility concerns.
- Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
- Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
- Must be able work well in an integrated product development/ design environment.
- Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
- Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
- The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
- Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.

Experience/Qualifications:
- Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
- Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
- Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
- Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
- Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
- Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10853
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 04/29/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable.
• US Person is required
 
Job Number: 10732
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10696
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/26/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Aerospace Industry)(Entry - Mid-Level)

Description:
The Manufacturing Engineer provides manufacturing and field service engineering support for military ejection seating products within the military aerospace industry.

Responsible for engineering support for both internal and external customers through problem solving, product improvements, cost reduction, small scale design, customer/authority compliance and engineering documentation maintenance.

Essential Responsibilities:
• Provides experienced sustaining engineering support to aircraft manufacturers, military and other aftermarket customers.
• Provides sustaining engineering support to military and other aftermarket customers.
• Provides engineering support for operations, supply chain, quality, technical publications and program management.
• Updates engineering documentation through Engineering change orders and Document Change notices.
• Communicates with internal and external customers on a regular basis.
• Leads teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
• Provides root cause and corrective action investigations.
• Direct interface with external customers on engineering issue resolution and product improvements.
• Supports after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained.
• Supports Material Review Board (MRB) evaluation and disposition.
• Ensures quality product utilizing quality procedures.
• Audits work area for safety compliance.
• Adheres to all rules and codes of conduct.
• Performs other duties as required.

Skills Required:
• Excellent Problem-Solving Skills
• Proficient oral and written communication skills
• Ability to multi-task and work in a high pace environment
• Meet the expectations and requirements of internal and external customers

Skills Desired:
• 3D CAD experience or training
• Experience in aerospace engineering design and manufacturing environment
• Knowledge of commercial and/or military specification
• Understanding of commercial and/or military aerospace design protocol
• Experience with aerospace certification and qualification requirements

Competency Expectations:
Drive for Results - Meets deadlines - Organized and ability prioritize multiple efforts Customer Focus - Meets expectations of internal and external customers - Customer is first priority Functional/Technical Skills - Willing to learn and grow technical skills and stay current with technology - Sufficient skills to prevent errors and ensure accuracy
 
Job Number: 1910101630
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Shift: Weekend 1st Shift - Friday to Sunday from 5:30 AM – 6:00 PM and Monday from 5:30 AM to 9:30 AM
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. SAP and Solumina experience preferred

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10916
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
2. Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 3+ years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10956
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-353
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 04/15/2019
Last Updated: 05/21/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR - $52.50/HR
Duration: Long Term Contract
Shift: 2nd Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10747
Job Location: Savannah, GA
Rate: $50.00/HR - $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 04/08/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Experience in a composite fabrication/bonding environment preferred.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-351
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 04/04/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10122
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 05/28/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
SOLUMINA_CATIA_SAP_MANUFACTURING_MECHANICAL_ELECTRICAL ENGINEERING.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10156
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Solumina and SAP experience preferred.
2. Fuselage Manufacturing and Assembly experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
6. Participate in Design for Manufacturing assessments with Engineering.
7. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
8. Perform audit of co-workers output based on defined requirements and procedures.
9. Must demonstrate knowledge of ME policies and procedures.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
12. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
13. Support all Safety, Sustainability and Ergonomic Initiatives.
14. Aid in development and maintenance of Business Continuity Plan.
15. Author DRDI/DMT rework instructions to support effective corrective actions.
16. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
17. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10594
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/11/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
PDS Tech is seeking a Manufacturing Engineer II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
  • Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
  • Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
  • Author DRDI/DMT rework instructions to support effective corrective actions.
  • Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
  • Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
  • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
  • Investigate and assist in preparing justification for equipment and facility requests.
  • Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
  • Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
  • Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
  • Incorporate Lean Manufacturing Methodology into existing and future processes.
  • With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
  • Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
  • Support all Safety, Sustainability and Ergonomic Initiatives.
  • Aid in development and maintenance of Business Continuity Plan. 
  • Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
  • Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com

 

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience



Unique Skills:
SOLUMINA_CATIA_SAP_MANUFACTURING_MECHANICAL_ELECTRICAL ENGINEERING.



Other Requirements:
Proven knowledge of Lean and/or Six Sigma principles.
Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
Lean Six Sigma Greenbelt Certification or higher preferred.



For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com

 



 


 
Job Number: 1810095687
Job Location: Savannah, GA
Duration: 6 months
Input Date: 11/21/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Burke
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r19yQAA&URLSource=cjhunter

Manufacturing Engineer II - 374082

Description:
**Weekend first shift: Friday through Sunday from 0530 - 1800 and Monday from 0530 to 0930**

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.
13. Author DRDI/DMT rework instructions to support effective corrective actions.
14. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
15. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
Unique Skills:
SAP and Solumina experience preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 374082
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/07/2019
Last Updated: 06/15/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Manufacturing Engineer II - Composite

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
.1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
Unique Skills:
Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable. Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 374088
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/13/2019
Last Updated: 06/15/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer w/Secret Clearance

Description:
*This is a full time, 6 month, contract position based in Lexington, KY*



We are hiring for a process or manufacturing engineer who will be design our DoD manufacturing facility for optimum performance.

The activities candidate will be involved in will include developing/improving process layouts/instructions, machining, sequence of operations, tooling fabrication, methods, and processes necessary to meet our production quality, delivery, manufacturing handling, and cost objectives.



Will work closely with teams including assemblers, testers, and inspectors as well as with design engineering to solve a variety of simple to complex manufacturing problems as well as coming up with the production plan. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*2 years’ experience as a process or manufacturing engineer.
*Experience with engineering drawings, work instructions, understanding of tolerances.
*Experience in Producibility for manufacturing; configuration control principles
*4 year engineering or equivalent degree (ME or IE preferred)
*Active (or Interim) Secret Clearance



Pluses:
*Lean Principles knowledge (training in Green/Black Belt is OK), tools and thinking experience
*Experience with work flows, process development of assemblies, tooling or mechanical integrations
*Both mechanical and electrical background
*Tool fabrication/assembly experience
*Teamcenter software experience; knowledge of CAD software
*AS9100 assembly/quality system back ground and track record of process improvement.
*DoD experience/standards testing
 
Job Number: 452
Job Location: Lexington, KY
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Mechanical Design Engineer

Description:
Bachelor of Science degree in mechanical engineering; 6-8 years of CAD software experience using Pro/E-PTC Creo 3; have knowledge of geometric dimensioning and tolerancing, GD&T; prefer proficiency with Windchill

Contact one of our recruiters for more information on the above job and many more!

David Dodson - ddodson@teamglobal.com
Gary Kidd - gkidd@teamglobal.com
Mark Milligan - mmilliga@teamglobal.com
Sanjat Khatri - skhatri@teamglobal.com
 
Job Location: Grand Prairie, TX
Input Date: 01/28/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Mechanical Design Engineer

Description:
PDS Tech is seeking a Mechanical Design Engineer in Windsor Locks, CT who would like to learn and contribute to the design process.  This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.
 
The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.  This is both an individual contributor and mentorship level position.

The candidate will:
  • Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work.  Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
  • Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
  • Implement and support Standard Work processes across all programs to deliver consistent results.
  • Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
  • Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
  • The candidate must be a US person:

Education / Certifications
  • BSME or AE minimum, MSME preferred

 
Experience/Qualifications

  • Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
  • Prior experience in Aerospace Structures and Engineering Fluid Component Design.
  • Knowledge of drawings, geometric tolerancing, and drawing interpretation.
  • Experience with Manufacturing techniques for limited production hardware.
  • Ability to work within a matrix organization to achieve team and program goals.
  • Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
  •  A positive "can do" attitude, good presentation skills, respect for others, confidence, and patience.
  • Seven (7) to fourteen (14) years’ experience desired.

 
Industry Experience:

  • Previous experience in Aerospace Component Design desired

 
Optional:
Pro-E/CREO/Simulate preferred.
 
Job Number: 1910096941
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 01/15/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6q1QAA&URLSource=cjhunter

Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 06/14/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Designer

Description:



Designs and develops layouts for mechanical systems. Assists in the production of detailed schematics for HVAC or plumbing and piping systems.  Typically reports to a supervisor or manager. Position requires 5-10 years of related experience. Works on projects with limited complexity in a support role. Work closely with management.  Position requires proficiency in AutoCAD and Cadworx software.


Responsible for 3D modeling, preparing 2D drawings and drafting of industrial facilities
  • Coordinate with other disciplines to develop design deliverables
  • Have understanding of AutoCAD, and CadWorx 


Qualifications


 

  • Associate's degree or 2 years of college course work would be a plus
  • MS Office skills (Word, Excel, PowerPoint) required
  • Excellent oral and written communication skills required








 
Job Number: 1910101417
Job Location: KS City, MO
Duration: 12 months
Input Date: 04/16/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eWyQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Perform conceptual and detailed mechanical design, analysis and documentation of hardware and systems under minimal supervision while collaborating and interfacing with other mechanical engineers, designers, structural / thermal analysts, engineers from other disciplines as well as with line and program management and customers. Lead and own the design, documentation, and implementation of mechanical hardware for subsystem
design. * Solve complex technical problems that require the regular use of ingenuity and creativity while applying sound technical judgment.
* Conduct thermal and structural analysis utilizing hand calculations and industry standard tools.
* Conduct and participate in internal and external peer reviews.
* Provide support to testing, subcontractors, and the factory. Provide supervision and leadership to junior engineers.
* Manage to cost and schedule requirements of assigned tasks.
Additional Job Details:
Required Skills: * BS Degree in Mechanical Engineering or related field. * At least 10+ years of experience in mechanical engineering design, analysis, or manufacturing. * At least 5+ years of experience designing and developing military electronics, including circuit card assemblies. * At least 5+ years of experience conducting thermal analysis of military electronics, including circuit card assemblies. * Proficiency with 3D CAD modeling and drawing, (PTC CREO) and experience in Geometric Dimensioning and Tolerance. * Experience with MS Office (Word, Excel, PowerPoint, and Visio). * Ability to apply mechanical engineering knowledge to solve complex design problems. * Excellent Interpersonal skills with the ability to interact productively with other team members across various disciplines. * Excellent communication skills and able to communicate effectively, (written, verbal, and presentation). * Experience with program cost and schedule monitoring and reporting.
Desired Skills: * Experience in design and development of multi-layer digital and RF Circuit Card Assemblies (conduction and convection cooled). * Experience in a product data management environment (PTC Windchill).
 
Job Number: 49201
Job Location: Marlborough, Mass
Duration: 12 months
Start Date: ASAP
Input Date: 05/09/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Mechanical Engineer

Description:

Responsible for conceptualization, design, development, analysis, build, implementation,
and evaluation of technical products and systems. May develop a range of products and equipment
supporting seed production operations in the lab, plant, and field. Projects may include lab automation
to support internal research, development of novel equipment for seed production plants, and
large scale mobile equipment for field use.

Requires a bachelor's degree in engineering and 5-8 years of experience in the field or in a related area.
Requires proficiency with mechanical CAD software and some working experience with SolidWorks specifically.
Expertise with both product design and machine design is a plus.
Specific experience in the agricultural industry is not a prerequisite.

Familiar with a wide variety of the field's concepts, practices, and procedures.
Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks.
A wide degree of creativity and latitude is expected. May report to an executive or a manager.



 
Job Number: 1910101436
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ebsQAA&URLSource=cjhunter

Mechanical Engineer

Description:
PDS Tech, Inc. is seeking a Mechanical Engineer  in Hazelwood, MO. 

Job Purpose


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services.

Principal Accountabilities



  • Designs, develops, and documents mechanical and fluid systems and thermal environments.
  • Develops, maintains and/or modifies system designs/proposals to provide design documentation and high-level requirements to downstream users/customers.
  • Performs detail design development and modification of mechanical installations using relevant CAD and analysis tools.
  • Performs spatial integration at system or component level and modifications of mechanisms.
  • Prepares technical documents for mechanical components and systems.
  • Supports proposal preparation and new business development efforts.


 Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Education & Qualifications:
  • BS Degree in Engineering or related technical discipline
  • 7+ years of experience in mechanical engineering field; or MS Degree in Engineering or related technical discipline and 5+ years’ experience
  • U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements
  • Active DoD Secret Clearance is required to be considered. 

 Additional Desired Qualifications

  • Aerostructures (metallics and/or composites) experience
  • Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook


Physical Demands



  • Frequently required to spend long hours staying at a work stations and using office equipment 
  • Frequently required to spend long hours walking and standing on the production floor
  • May be required to use stairs when elevator is not available
  • Must occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1810094549
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/07/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxWTQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer, Principal / thermal analysis of military electronics, circuit card assemblies CREO - Clearance MA

Description:
164887
Job Title: MED / Mechanical Engineer, Principal

Work Site Address: Marlborough, MA 01752
Job Number: 9154213
Max Pay Rate: 80-88HR Max

Start Date: ASAP
End Date: 12 Months
Position Type: Contract

Job Description:
Perform conceptual and detailed mechanical design, analysis and documentation of hardware and systems under minimal supervision while collaborating and interfacing with other mechanical engineers, designers, structural / Thermal analysts, engineers from other disciplines as well as with line and program management and customers.
Lead and own the design, documentation, and implementation of mechanical hardware for subsystem design.
• Solve complex technical problems that require the regular use of ingenuity and creativity while applying sound technical judgment.
• Conduct thermal and structural analysis utilizing hand calculations and industry standard tools.
• Conduct and participate in internal and external peer reviews.
• Provide support to testing, subcontractors, and the factory. Provide supervision and leadership to junior engineers.
• Manage to cost and schedule requirements of assigned tasks.

Qualifications and Education Requirements
BS Degree in Mechanical Engineering or related field.
• At least 10+ years of experience in mechanical engineering design, analysis, or manufacturing.
• At least 5+ years of experience designing and developing military electronics, including circuit card assemblies.
• At least 5+ years of experience conducting thermal analysis of military electronics, including circuit card assemblies.
• Proficiency with 3D CAD modeling and drawing, (PTC CREO) and experience in Geometric Dimensioning and Tolerance.
• Experience with MS Office (Word, Excel, PowerPoint, and Visio).
• Ability to apply mechanical engineering knowledge to solve complex design problems.
• Excellent Interpersonal skills with the ability to interact productively with other team members across various disciplines.
• Excellent communication skills and able to communicate effectively, (written, verbal, and presentation).
• Experience with program cost and schedule monitoring and reporting.

Preferred Skills
Experience in design and development of multi-layer digital and RF Circuit Card Assemblies (conduction and convection cooled).
• Experience in a product data management environment (PTC Windchill).
 
Job Number: MB-R9154213ATO
Job Location: Marlborough, MA
Rate: 80-88/hr max
Per Diem: no
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 05/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Manufacturing Engineer (10+ yrs exp)

Description:
PDS Tech is seeking a Mechanical Manufacturing Engineer with 10+ years of experience in Windsor Locks, CT
 
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) Space hardware and ensure that the processes are available.
 
The Candidate will create manufacturing assembly documentation, concept tools, provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
 
The Candidate must:
  • ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
  • be able to perform cost estimates, work to schedules, and write procedures and policies.
  • be able to review drawings and concepts and resolve producibility concerns.
  • provide technical support to the manufacturing facility as well as to the external suppliers.
  • support failure investigations,
  • determine root cause of failure, and
  • implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
  • be able work well in an integrated product development/ design environment.
  • present to senior management on various topics,
  • be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
  • possess a positive attitude and be able communicate well with staff, IPD teams & management.

 
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.
 
Education / Certifications
  • Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

 
Experience/Qualifications

  • Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
  • Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software
  • Candidate must be a US person

 
Desired experience

  • Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
  • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
  • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing.
  • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
  • Experience with an MRP (Manufacturing Resource Planning) system


 
 
Job Number: 1910101258
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 04/12/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eCPQAY&URLSource=cjhunter

Mechanical Manufacturing Engineer (5+ yrs exp)

Description:
PDS Tech is seeking a Mechanical Manufacturing Engineer in Windsor Locks, CT
 
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.  
 
The Candidate:
  • Will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
  • Must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
  • Must be able to perform cost estimates, work to schedules, and write procedures and policies.
  • Must be able to review drawings and concepts and resolve producibility concerns.
  • Must provide technical support to the manufacturing facility as well as to the external suppliers.
  • Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
  • Must be able work well in an integrated product development/ design environment.
  • Will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
  • Must possess a positive attitude and be able communicate well with staff, IPD teams & management.

 
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.
 
 
Education / Certifications
Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

 
Required Experience/Qualifications
  • Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems.
  • Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

 
Desired Experience/Qualifications

  • Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
  • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
  • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
  • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
  • Experience with an MRP (Manufacturing Resource Planning) system

 
Job Number: 1910100042
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 03/14/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYUGQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (5-7 yrs exp)

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The candidate will:
• create manufacturing assembly documentation,
• concepts tools,
• provide technical assistance in order to assemble high quality, high engineered hardware for space applications.

Candidate must:
• ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• be able to perform cost estimates, work to schedules, and write procedures and policies.
• be able to review drawings and concepts and resolve producibility concerns.
• provide technical support to the manufacturing facility as well as to the external suppliers.
• support failure investigations,
• determine root cause of failure, and
• implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• be able work well in an integrated product development/ design environment.
• present to senior management on various topics,
• be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired experience
• Working on the manufacturing of components such as, heat exchangers, pumps, fans & accumulators
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910100961
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/08/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Mechanical Systems Engineer

Description:
MECHANICAL SYSTEMS ENGINEER

Location: Centennial, CO
Duration: 6 months


Main Responsibilities

In conjunction with system owners, perform the design, analysis, component selection, drawing creation, and integration of bell cranks, brackets, hinge elements, and secondary structure.

Perform drawing check, participate in peer reviews, preliminary design reviews, critical design reviews, mentor junior engineers in skills required for fluid system design and integration
Provide additional bandwidth creating technical drawing packages across the aircraft systems team
Qualifications

3-5+ years experience with fluid system design, analysis, fabrication, test, and integration
Knowledge of metallic component design, analysis, and manufacturing techniques
First principles understanding of stress, strain, material properties and material allowable
Experience with free body diagrams, identifying degrees of freedom and constraints, and synthesizing load cases on complex mechanical systems
Experience with rapid prototype methods and a demonstrated ability to bring conceptual designs to reality quickly
Expert in a major CAD package (NX, CATIA, Solidworks), proficient in drawing creation and geometric dimensioning and tolerancing (GD&T)
Capable designer of secondary structure, able to perform structural hand calculations, and simple finite element analysis of static loading conditions
Able to take practical descriptions of mechanisms and derive simplified load cases.
Experienced in design for manufacturing
Practiced with the selection and sourcing of aerospace components such as valves, filters, pumps, accumulators, instrumentation, clamps, etc
Works well in a team and has leadership experience
It would be awesome if you had:

Experience designing complex kinematic systems utilizing bellcranks and cam mechanisms to perform complex motions
Relevant aircraft system design experience, proficient in aircraft design standards outlined in AC 43.13






___________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56725
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/11/2019
Last Updated: 06/11/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

Metrology Engineer

Description:
Must be a U.S. citizen with experience using precision 3D measurement devices to locate and assembly parts and tools; experience with laser trackers is a must; bachelor's degree in mechanical engineering and 18 months of metrololgy engineering, manufacturing engineering, automation engineering, or related technical experience; knowledge of 3D CAD/CATIA modeling and an understanding of GD&T; knowledge of lean or Six Sigma principles


Contact one of our recruiters for more information on the above job and many more!

David Dodson - ddodson@teamglobal.com
Gary Kidd - gkidd@teamglobal.com
Mark Milligan - mmilliga@teamglobal.com
Sanjat Khatri - skhatri@teamglobal.com
 
Job Location: Savannah, GA
Input Date: 01/28/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Technical Designers/ Technical Analysis- Structural at Berkeley, MO

Description:
Technical Design (Level 1 and 2)- Position 1

Location: Berkeley, MO
Duration: 6+ Months

Skill Code: 636- Structural Design

Description:
Uses manual or Computer Aided Design (CAD) tools to define or revise mechanical/structural engineering product definitions. Verifies accuracy of non-technical data. Gathers relevant data for root cause analysis. Produces changes to resolve discrepancies in design packages. Works under close supervision.

Education / Experience:
AA degree in related discipline.

------------------------------------------------------------------

Technical Analysis (Level 1, 2 and 3)- Position 2

Location: Berkeley, MO
Duration: 6+ months

Skill Code: 65X-Structural Analysis


Description:
Assists in gathering and inputting data for structural analysis, fleet structural support analysis and structural testing. Inputs and retrieves data from existing databases. Updates and maintains document libraries. Works under close supervision.

Education / Experience:
AA degree in related discipline.
 
Job Location: Berkeley, MO
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 12/10/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

NX Mechanical Design Engineer

Description:
JSG is hiring a Design Engineer - NX for our client in Long Beach, CA!

Local Candidates preferred.

The primary focus will be on modeling and design of components for commercial aircraft and spacecraft. The ideal candidate will participate in regular meetings to coordinate design details with clients, designers, engineers, and management.

Job requirements:

Composite design experience is a huge PLUS
Siemens NX CAD experience required
Experience with design of composite parts and assemblies
Required including:
Laminates and sandwich structures
Bolted and bonded joints
Integration of composite parts into metallic components
ASME Y14.5 Dimensioning and Tolerancing
Excellent written and verbal communication skills
Demonstrated ability to work independently
Siemens Fibersim experience preferred
CATIA V5 experience preferred

Pay rate: DOE
3-6 months
Composite design experience
 
Job Number: 372825
Job Location: Long Beach, CA
Per Diem: If Qualified
Overtime: Possible
Duration: 3-6 months
Start Date: ASAP
Input Date: 05/01/2019
Last Updated: 06/14/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Location: Savannah, GA
Rate: $44.43 - $49.36/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience developing EKL, KBE, Knowledge Patterns, UDF and Product Document Templates with CATIA V5 required.
2. Experience with VB, VB.NET and CAA for CATIA V5 preferred.
3. Experience developing EKL with 3DExperience / CATIA V6 preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Six (6) years of engineering or IT experience required.
3. Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
4. 3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
1. Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes.
2. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products.
3. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle.
4. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications.
5. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities:
Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out.
2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
3. Direct activities for lower level engineering staff assigned to specific projects.
4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
6. Determine user needs and utilize system queries and utilities to support users information research.
7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades.
2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
4. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
2. Previous experience with digital pre-assembly of product components (aerospace preferred).
3. Experience in process mapping and other process improvement techniques preferred.
4. Familiarity with computer-aided design, manufacturing and product data management systems.
5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 10771
Job Location: Savannah, GA
Rate: $44.43 - $49.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 04/10/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

PWB (CAD) Designer-California

Description:
PDS Tech, Inc. is seeking a PWB Designer, in Redondo Beach, CA-90278

NOTE: 12 Months Contract with possible extension and Must be a US Citizen.
  • Work Schedule: 9/80

Summary: 
PWB Designers specialize in the areas of printed wiring board layout, routing, and design. The ability to develop a solid board development plan (from pre-IDR1 thru IDR3) and to coordinate and conduct effective board readiness / artwork reviews is a critical skill to develop.
  • CAD tool proficiency is absolutely essential. The ability to mentor others in the use of the CAD tools is required.
  • Experienced performers are expected to take on final design and drawing check responsibilities. Familiarity with board producibility and assembly and manufacturing processes is required.
  • Product Engineers and designers are expected to enforce and follow all applicable processes.

Basic Qualifications:

  • High School Diploma/GED plus 6 years of PWB Designer experience.
  • Nine years industry experience in board layout.

Contact: Sana, Email: skhan@pdstech.com/ 314-665-2124

Preferred Qualifications: 
  • Proficiency in Mentor Expedition flow related tools.  
  • Experience in high speed digital as well as RF board layout.

 
Job Number: 1910097149
Job Location: Redondo Beach, CA
Duration: 12 months
Input Date: 03/01/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sana Khan
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r7MGQAY&URLSource=cjhunter

Principal Engineer Tool Design 3

Description:
Chipton-Ross is seeking a Principal Engineer Tool Design 3 for an opportunity in El Segundo, CA.

RESPONSIBILITIES:
A successful Tool Designer (TD) shall be able to design simple to complex tooling, Drill Jigs and Assembly Jigs, Dies, via Catia/NX to support production. This person shall be able to conceptualize these designs in 3D, detail the CAD model and detail the drawings for fabrication. These drawings shall be properly laid out using views and dimensions that are in compliance with ASME Y14.1-5 standards. The TD, while being the principle contributor and/or leader, shall work with internal/external customers, and colleagues to ensure that the design meets the customer needs and see it through each phase of the engineering process (Design, Fabrication, and Implementation). In addition, it is essential that this person have the ability to mentor less experienced engineers, work autonomously and in a team environment, adapt to processes and company policy while providing input or methods of process/design innovation.

REQUIRED EXPERIENCE:
Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math) and 5 years engineering experience, OR 10+ years of experience in a Design engineering role is required.
Must have 5 years of experience in Catia or NX.
Must have 5 years of experience using ASME Y 14.5 in a design role.
Must have 5 years of experience in Tool Design.
Ability to work with little to no supervision.
Preferred Qualifications:
10 years' experience in Tool Design with Catia.

EDUCATION:
Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math) is required.
School must be accredited.

HOURS:
9/80 workweek

IND123 RD1
 
Job Number: 178937
Job Location: El Segundo, CA
Rate: $45 to $47.00 DOE
Duration: 1 year
Input Date: 04/24/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Location: Colorado Springs, CO
Rate: $33.38/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have an Bachelor's Degree****
****Preference to line support engineer i.e. Manufacturing Engineer, Complex Mechanical Device****

Job Description:
- The Product Engineer provides manufacturing and field service engineering support for military ejection seating products within the military aerospace industry.
- Responsible for engineering support for both internal and external customers through problem solving, product improvements, cost reduction, small scale design, customer/authority compliance and engineering documentation maintenance.

Essential Responsibilities:
- Provides experienced sustaining engineering support to aircraft manufacturers, military and other aftermarket customers.
- Provides sustaining engineering support to military and other aftermarket customers.
- Provides engineering support for operations, supply chain, quality, technical publications and program management.
- Updates engineering documentation through Engineering change orders and Document Change notices.
- Communicates with internal and external customers on a regular basis.
- Leads teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
- Provides root cause and corrective action investigations.
- Direct interface with external customers on engineering issue resolution and product improvements.
- Supports after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained.
- Supports Material Review Board (MRB) evaluation and disposition.
- Ensures quality product utilizing Collins Aerospace quality procedures.
- Audits work area for safety compliance.
- Adheres to all Collins Aerospace rules and codes of conduct.
- Performs other duties as required.

Skills Required:
- Excellent Problem Solving Skills
- Proficient oral and written communication skills
- Ability to multi-task and work in a high pace environment
- Meet the expectations and requirements of internal and external customers
- 3D CAD experience or training is desired
- Experience in aerospace engineering design and manufacturing environment is desired
- Knowledge of commercial and/or military specification is desired
- Understanding of commercial and/or military aerospace design protocol is desired
- Experience with aerospace certification and qualification requirements is desired

Competency Expectations:
- Drive for Results
- Meets deadlines
- Organized and ability prioritize multiple efforts Customer Focus
- Meets expectations of internal and external customers
- Customer is first priority Functional/Technical Skills
- Willing to learn and grow technical skills and stay current with technology
- Sufficient skills to prevent errors and ensure accuracy

Education:
- Bachelor's Degree required.
- 2+ years of experience.
 
Job Number: 10874
Job Location: Colorado Springs, CO
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 05/02/2019
Last Updated: 05/28/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Lifecycle Management Analyst II

Description:
Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Unique Skills:
• Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required.
• Strong customer relationship management skills. Experience Requirements: Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design
• Essential Job Functions: PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience.
• 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.).
• 1 year Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Execute plans, according to schedules, for engineering assignments.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Coordinate activities for lower level engineering staff assigned to specific projects.
• Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements.
• Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs.
• Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Develop system queries and utilities to support users information researches
• Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA.
• Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting.
• Ensure proper security, archiving and audibility of product releases.
• Analyze, monitor and report business and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes.
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self-motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-342
Job Location: Savannah, GA
Rate: $40-$50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/26/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/10/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

RF Microwave Design Engineer 4 CA

Description:
1768 RF Microwave Design Engineer 4 (Job Number: 19012796)

Number of Openings: 1

Location(s): United States-California-Azusa


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Jun 19, 2020

Pay Rate: $68 to $72/hr

Work Schedule: 9/80

Duration of Assignment:

Aerospace Systems sector is seeking a RF Microwave Engineer 4 to join our team of qualified, diverse individuals. This position will be located in Azusa, CA.

The successful applicant will be assigned to support RF design, analysis, and test of passive RF Microwave weather sensors/systems, subsystems, and components. Specific assignments may include testing of RF subsystem and RF components, performing CAD simulations, supporting anomaly investigations, deriving RF requirements, performing system analysis, managing RF suppliers, and supporting receiver integration and test. Additional responsibilities may be assigned commensurate with performance or due to business needs.

Note that this role will work 1st shift with a flexible start time between the hours of 6:30 am and 9 am. Some off-shift work will be required as needed by the program.

Basic Qualifications:

BSEE Plus 9 years of RF or RF test experience or High School Diploma/GED plus 17 years of experience in lieu of a bachelor degree.
 
Job Number: JK-1768
Job Location: Azusa, CA
Rate: 72/hr max
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 01/10/2019
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solid Propulsion Design Engineer

Description:
Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Duration: 9 month contract
Shift: 9/80 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.
20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.
10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.
10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:
- Solid Propellant Motor Design and Manufacturing experience preferred.
- Experienced with Computer Aided Design (CAD) tools such as CREO/PRO-E and or Siemens NX .
- Experienced in 3D modeling and 2D drawings.
- Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.
- Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Education:
- Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
 
Job Number: 10534
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos.
Input Date: 03/19/2019
Last Updated: 06/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Sr. Piping Designer

Description:
NEEDED - SR. PIPING DESIGNERS
WORKING IN ELDORADO, ARKANSAS ON NEW STEEL MILL PROJECTS
MUST HAVE CADWORX AND AUTOCAD EXPERIENCE
WATER TREATMENT (COOLING TOWER) EXPERIENCE IS A PLUS

 

 
Job Number: 1910100098
Job Location: El Dorado, AR
Duration: 6 months
Input Date: 03/28/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYgKQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 01/09/2019
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Staff Analyst 2

Description:
Chipton-Ross is seeking 2 Staff Analyst 2's for openings in Renton, WA.

RESPONSIBILITIES:
The successful candidate will be responsible for providing business execution support and utilizing the tools, processes, business review cadence and internal engagements required to successfully execute the business. Primary job duties:
Work closely with the organization leaders and Business Operations team to maintain communication and alignment on objectives/deliverables
Help manage and run key meetings for the Program including weekly Program Status Reviews, Program Deep Dives, and Integrated PMO Meetings
Develop Executive Level presentations to provide visibility to program status
Assist in coordination of Senior Level Program events such as User Acceptance Testing, Workshops, and Product Iteration events
Help coordinate onboarding activities for new employees
Maintain Program SharePoint, DLs, Portal, and Mailbox
Help run 2CHR LT Meetings as a back-up including SAM and Weekly Planning
Special Projects and ad hoc tasks will be assigned as needed

REQUIRED EXPERIENCE:
Experience with Microsoft PowerPoint and Microsoft Excel for executive support and synthesizing data/information
Experience providing support to multiple customers such as executives, managers, and staff members
Experience preparing, submitting, and presenting reports for leadership
Experience authoring metrics, status, and performance reports
Experience in Business Operations, PMO or HR
Experience working with Senior and/or Executive Leadership

EDUCATION:
Accredited Bachelor's degree and typically 3 or more years related work experience, a Masters degree and typically 1 or more years related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 178182
Job Location: Renton, WA
Rate: $DOE
Duration: 6 Months
Input Date: 03/25/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engineer 3 (UGNX Required) (AZ and MO)

Description:
Structural & Payload Design Engineer 3 & $

Location: Berkeley, MO and Mesa, AZ
Duration: 12+ months

Description:
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Education/Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification with Unigraphics CAD experience.

Skill Code: 647-Structural Design
 
Job Number: 17-08012
Job Location: Berkeley, MO
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers - Must be degreed - UGNX

Description:
Basic Qualifications: Bachelor of Science degree in STEM discipline.
9 years minimum aircraft metallic structural design experience.
CAD Experience using Siemens NX 8.5 or later.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.
NX 8.5 or later required with PMI knowledge a must.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-Stru-UGNX
Job Location: Melbourne, FL
Rate: $60.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 05/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers - Must be degreed - UGNX

Description:
Basic Qualifications: Bachelor of Science degree in STEM discipline.
9 years minimum aircraft metallic structural design experience.
CAD Experience using Siemens NX 8.5 or later.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.
NX 8.5 or later required with PMI knowledge a must.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-Stru-UGNX
Job Location: Melbourne, FL
Rate: $60.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 05/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Structural Engineer

Location: Centennial, CO
Duration: 6 Months

Description:
Design Engineer full time to perform. Structural design of hardware on the Vulcan launch vehicle upper stage. Hardware includes components, small assemblies, and large assemblies. Designer needs to be experienced in NX11 CAD modeling. They should also have experience with designing metals for machining and assembly. Experience with test documentation and project management preferred
Need someone with 5+ yrs exp.

Requires a bachelor's degree and 4 -8 years of experience (for external candidates only).
 
Job Number: 19-04950
Job Location: Centennial, CO
Duration: 6 mos
Input Date: 05/15/2019
Firm Name: ICONMA LLC
Attention: Kusuma
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Structural Integrity Engineers

Description:
PDS Tech, Inc. is seeking a Structural Integrity Engineers in Wichita, KS

Responsible for material selection, configuration, and sizing for structure of new products, as well as for providing production and field support for existing products.
Perform design evaluation, considering durability, fracture, crack growth, and inspection interval determinations.
Generate operations spectra, internal loads, and stress spectra.
Provide production support, including the evaluation of discrepancies and the responsibility for dispositions to ensure that all products meet the fatigue and damage tolerance requirements.
Develop and conduct cyclic, material, and residual strength tests in support of 14 CR regulations.
Modify and develop software code in support of test and analysis functions.
Use CATIA modeling software to analyze and evaluate design configurations.

• Review Engineering Drawings and Digital Data to ensure efficient load path and adequate structural strength and stiffness
• Work with various groups within Product Engineering to develop structural test procedures and pass/fail criteria.
• Keep detailed Stress Notes on design changes and production non-conformances
• Utilize Finite Element Software to solve complex structural problems
• Prepare Structural Reports in support of FAA compliance findings on fleet aircraft modifications and existing production aircraft.
• Perform structural analysis in support of new design and production support activities.
• Conduct performance and structural testing
• Participate in the development and improvement structural test processes and tools.



• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Additional Notes from Manager
• Working knowledge of generic CAD design tool processes. Experience in CATIA V5 or V6 is preferred
• Ability to read and produce 2D drawings using standard industry practices
• Skills in Microsoft Office suite software
• C programming and assembler preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
 
 
Job Number: 1910098613
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/11/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTaOQAU&URLSource=cjhunter

Systems Engineer

Description:
Location: Lexington, KY
Rate: $60.00 - $71.25/HR
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Oversees Engineering and Technology (E&T) PLM, CAD, and other engineering tools for the Rotary and SOF Systems (R&SS) mission area.
- In this role, the engineer will develop strategies for improving current engineering tools, communicate the engineering solution with IT for incorporation, test updated and new processes, and develop new tools for the continuous improvement of E&T processes.
- The engineer will also provide input for incorporation in command media, create and distribute training materials, and support the R&SS mission area.

Education:
- Level 3: BS+6-10 YRS or MS+4-8 YRS
- Experience with Siemens Teamcenter, CATIA V5, and Microsoft Access is a plus.
 
Job Number: 10811
Job Location: Lexington, KY
Rate: $60.00 - $71.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/22/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TeamCenter Specialist

Description:
Location: Burnsville, MN
Rate: $53.61/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have an Bachelor's Degree****

Job Description:
This position will support engineering through:
- This is not an IT developer position, it's targeted at someone capable of tech document editing / writing, TeamCenter change order processing, and coordination with other staff.
- Execution of the TeamCenter CO process to burn down and maintain a minimal backlog of part and document changes
- Editing technical documentation, in some cases directly (such as reports, specs) and in other cases indirectly (working with drafting and other engineering services organizations to incorporate changes). Supporting other technical documentation as part of new business development, new product development, and/or continuation engineering.
- Performing REACH analysis in TeamCenter in alignment with upcoming business process changes. Support user acceptance testing.
- Coordinating export classification determination of items and documents, and inputting those classification results into our systems.
- Incorporating changes into MS Project Server spend forecasts as directed.

Skills preferred but not mandatory:
- TeamCenter Change Order Process
- Tech writing - CAD (electrical or mechanical)
- Microsoft Project

Education:
- Bachelor's Degree
 
Job Number: 10854
Job Location: Burnsville, MN
Rate: $53.61/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 04/29/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Technical Specialist I

Description:
PDS is seeking a Technical Specialist I for an open position in Savannah, GA.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services 

Principal Duties and Responsibilities:

Essential Functions



  • Contributes to planning, developing and coordinating of important engineering projects 
  • Provides specialized technical assistance to team members
  • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  • Determines and develops own approach to solutions within schedule and cost objectives
  • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 
  • Acts as liaison with representatives outside of the assigned group/area 


For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com
 

Additional Functions: 



  • Actively works to improve daily processes and ensures all work meets customer requirements 
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Unique Skills:



  • Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD data sets, in accordance to requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: 
  • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
  • Proper application and compliance with all Engineering and customer drawing requirements.
  • Use and understanding of GD & T a must.
  • Dimensioning and tolerancing including familiarity with ASME Y14.5. 
  • Application of best drafting and design practices and procedures.
  • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
  • Advise Design personnel regarding GAC drawing and design practices and procedures.
  • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. 
  • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
  • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
  • Essential Duties and Responsibilities
  • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
  • Ensures designs meet customer criteria, quality standards and FAA requirements.
  • Adheres to budget and project schedules.
  • Provides design guidance and feedback to other engineering personnel
  • Other duties as assigned.
  • Knowledge of industry design and documentation standards.
  • Experience with mechanical assemblies and manufacturing technique design.
  • Ability to work independently and cross-functionally.
  • Experience in communicating with employees/teams in productive and efficient manner.
  • Strong communication and problem-solving skills.



Other Requirements: 



  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com

 
 
Job Number: 1910097731
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/31/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Burke
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9XaQAI&URLSource=cjhunter

Technical Designer III - (Tukwila, WA)

Description:
***Several openings in the Seattle/Everett, WA areas***

Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition for structural test engineering. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition, both model based and 2D drawings, based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional integrated end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. CATIA V5, Enovia

Prefer an AA Degree.
 
Job Number: TechDesTukwila
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

Technical Writer & Ilustrator

Description:
General Summary:
The Technical Writer will work independently and as part of a team to author a set of airplane technical manuals (AFM, AMM, CMM, IPC, WDM, SRM) from engineering, manufacturing, flight, and supplier data. The writer shall be able to research within Engineering drawing structure to find all necessary supporting documents.

Duties and Responsibilities:
1. Research technical information to develop technical documents.
2. Ability to develop airplane illustrated parts catalog from engineering drawings, blueprints, manufacturing, flight, bills of material, and supplier data; using the industry system of indenture.
3. Work independently and as part of a team to help revise a set of airplane technical manuals (AFM, AMM, CMM, WDM, SRM) from engineering, manufacturing, flight, and supplier data.
4. Ability to create line art to illustrate aircraft parts and assemblies for use in aircraft technical manuals, parts catalogs and other related publications.
5. Able to develop isometric technical illustrations from scratch using basic technical illustration principles.
6. Experienced in interpreting blueprints, detailed engineering specifications, and schematics (electrical, hydraulic, and pneumatic).
7. Exhibit strong attention to detail and be an excellent communicator, verbally and through graphic visualizations

Education, Work Experience, Certification and/or Licensure:
1. Aviation technical writing experience required.
2. Knowledge of technical publication’s regulatory requirements and Industry Writing Specifications (ATA , GAMA, DITA and S1000D).
3. Experience authoring documentation in structured Adobe Framemaker (SGML, XML) and Cortona3D/Xmetal RapidAuthor (ATA task numbering; typical DTDs/schema, elements and attributes) or other .xml authoring software.
4. Experience with MS Office suite.
5. Experience using CAD/CATIA/3D illustrations.
6. Experience with Teamcenter PLM system.

Knowledge, Skills and Abilities:
1. Knowledge of aircraft systems and technical documentation, including illustrated parts catalogs, airplane maintenance manuals, operator manuals, and installation instructions
2. Past aviation maintenance or assembly work
3. Demonstrate strong attention to detail and personal organization
4. A fundamental understanding of FARs as they apply to aircraft operations, maintenance and design certification.
5. Excellent communication and computer skills.
6. Self-starter and able to make sound writing decisions with minimum assistance from supervision.


HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com


ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
 
Job Number: APTECHNC
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Yes
Duration: Long Term / Direct
Start Date: ASAP
Input Date: 04/23/2019
Last Updated: 06/13/2019
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Email: albert.peniche@yoh.com
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Tukwila, WA
Duration: 6 months with possible extension up to 1 year

Description:
Complete knowledge of design of experimental models, mechanisms, prototypes, test rigs and fixtures, test equipment, and load measurement devices. Includes mechanical, hydraulic and pneumatics systems design. Knowledge of machine shop tools and processes. Ability to integrate wide range of test instrumentation (e.g., strain, pressure, and temperature). Utilizes analytical tools (e.g., classical stress analysis, finite element analysis, CAD based kinematics) to validate design and document in report format.

Skilled mechanical and structural design engineer, proficient with CATIA and assembly design.
Familiar with client processes, design manuals and drawing release in a lab test environment (i.e non-production). Prefer lab test related background.
Familiar with client fastener design, selection, specification, supersession, process specifications and standards. Familiar with hardware and fastener installation as well as sheet metal design.
Complete understanding of CATIA workbenches- drawing, GSD, product structure and libraries.
Experienced with 3D modeling, 3D geometry, power copies, generating views, drawings, products and save management in CATIA.
Experienced with client REDARS
Knowledge of manufacturing and assembly processes in a lab environment.
General knowledge of shop processes and practices in a lab environment.
Able to work quickly and efficiently in a project environment under the direction of design engineers.
Able to communicate clearly and effectively with technical experts as well as support team in the execution of the project goals.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.

Skill Code:
657-Aerodynamic Testing
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/26/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Test Engineer

Description:
Seeking an experienced test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.

Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 06/14/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Thermal/Fluids Analyst

Description:
PDS Tech, Inc. is seeking a Thermal/Fluids Analyst, in Minneapolis, MN.
Activities involve the thermal and fluid analyses supporting design and testing of precision guide munitions systems.
The position is within the Thermal and Fluid Sciences group of the Applied Mechanics department.
That group is responsible for thermal and fluids analyses in support of requirements assessments, trades studies, prototype design, detailed design, test preparation, and analysis of thermal/fluids-related test data to successfully guide design activities.
The and position work within an interdisciplinary design team to support the iterative and evolving design process.
• Model development - System and environment information collection - Material information collection - Development of a model - Model running for various scenarios - Collecting, summarizing, and analyzing results relative to task requirements - Documenting and presenting results with conclusions and recommendations
• Active participation in design team meetings
• Active participation in test planning activities
• Analysis, interpretation, and application of test data to design activities
• Working with group colleagues to develop and apply best practices to analysis activities

Skills/Experience/Education Required
• Proven skills in developing working fluids and thermal models from first principles
• Proven ability to develop working fluids and thermal models for complex geometries, boundary conditions, and initial conditions
• Proven ability to interpret, document, and report results of analyses to support design activities

• 5+ years of experience in fluids and thermal analyses
• Experience performing system engineering trade studies, analysis of alternatives, sensitivity analyses, etc.
• Experience working in an interdisciplinary engineering design team

• Bachelor's degree in Mechanical, Aerospace, or Chemical engineering OR Physics
Must have and active Secret clearance or held one within the last two years. Please list the candidate's clearance level in the submittal 

 Skills/Experience/Education Preferred
• Working familiarity with analysis tools such as ANSYS (Mechanical, CFX, Fluent) or STAR-CCM+
• Demonstrated ability to import geometries from CAD models (Creo) into analysis software
• Demonstrated ability to relate model results to allowable limits
• Familiarity with fluids and thermal test methods including test planning, instrumentation, data acquisition, and data analysis to validate models and conclusions
       
• Analysis of weapon systems
• Familiarity with weapon's specs
• Familiarity with multi-physics modeling
• Experience with aerodynamics
• Experience with HVAC systems
• Master's or PhD in Mechanical or Aerospace engineering with emphasis in fluid mechanics or heat transfer

 
 
Job Number: 1810093607
Job Location: Minneapolis, MN
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Ramon Quintana
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f84ZAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
- Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Complete understanding and wide application of technical principles, theories and concepts, in the field.
- Utilizing manufacturing engineering skills to develop and solve complex issues.
- Independently determines and develops approach to solutions.
- Provides technical solutions to a wide range of difficult problems.
- May use CAD/CAM to design tools.

Education/Experience:
- Bachelor's Degree required.
- 4+ years of Catia experience.
- 4+ years of CAD experience.
- 4+ years of tooling experience.
- Aviation Aerospace experience required.
 
Job Number: 10346
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/29/2019
Last Updated: 06/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Location: Chula Vista, CA
Rate: DOE
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****

Job Description:
- Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling.
- This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.).
- The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes.
- Must have ability to prepare standard work packages for offload, and develop conceptual designs.
- In addition, be able to perform tool stress analysis.

Requirements:
- BS degree and 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace preferred). Willing to accept experience in lieu of degree.
- Strong Mechanical/Manufacturing Aptitude.
- Good understanding of assembly, machining and composite manufacturing processes.
- Good understanding of tool fabrication processes including welding, machining, heat treat, etc.
- Good understanding of ANSI Dimensioning and Tolerances.
- Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred.
- Experienced in Lean manufacturing principles and strong aptitude towards implementing continuous improvement.
- Experienced in Microsoft Office applications (Word, Outlook, PowerPoint, etc.) and good technical writing skills.
- Experience with tooling stress analysis in FEM and classical methods.
 
Job Number: 10102
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 05/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Tool Design Engineer

Description:
Chipton Ross is seeking a Tool Design Engineer for an opening in Cypress, CA

Job Summary:
The Tool Design Engineer will work closely with many internal departments such as Engineering, Operations, Quality, and Planning. Responsible for effectively managing, coordinating and controlling new tooling design, sign-off, development, procurement and maintenance, ensuring quality and delivery meets expectations of the customer.

Summary of Duties
" Management of the tooling design, sign-off, development, procurement and maintenance process by providing leadership which generates a culture of empowerment, individual responsibility and stretch
" Drive quality, efficiency and output across the plant, upholding the highest Health and Safety performance
" Balance multiple designs and projects, acting as the primary point of contact for tooling needs.
" Act as an engineering liaison during design development of new tooling to ensure manufacturability
" Interact with all departments impacted by tooling design and production to ensure the optimal and most efficient result is achieved
" Have detailed knowledge of how to read engineering drawings, and be able to relay information to production team members
" Develop best tooling design and production standards and practices
" Provide feedback to Design Engineering and Customers to improve product design for ease of manufacturing, optimization of cost, weight reduction, and best delivery that meets the quality requirements
" Ensure standardization and compliance to engineering, customer, and company specifications.
" Solve manufacturing issues and communicate effectively with solutions
" Analyze and process supplier CAD / tool designs and proposals for coordination to customer buy-offs

Qualifications:
BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering preferred.
6+ years of experience and a minimum of 3+ years of related tool design experience (assembly tooling preferred)
Computer Skills: Proficient with Microsoft Office products including, Word, Excel, Powerpoint.
Expert in Catia IV and Smarteam
Relevant and significant engineering experience in tooling/jigs/fixtures and working in a fast paced production environment. Self-motivated and capable of independent decision making and managing time to meet strict schedule.

Work Schedule
1st Shift, 5/40

 
Job Number: 175636
Job Location: Cypress, CA
Rate: Up to $53.00 DOE
Duration: 12+ months
Input Date: 12/10/2018
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Back to Advanced Job Search