Job Search Results

572 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/06/16 Sunday 09:37AM Pacific Time by ContractJobHunter. )

Listings 1 - 572

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 04/15/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10718
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10716
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/28/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1459-1S5 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS


Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1459-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1458-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 4: BS+16 YRS or MS+14 YRS

Experience
Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1458-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 04/18/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

Aircraft Assembly Technician

Description:
PDS Tech, Inc. is seeking an Aircraft Assembly Technician in Mesa, AZ.

Summary:
  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.
  • Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions.
  • Follow specific tool control, FOD control and safety guidelines and policies.
  • Prefer At least 2 - 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems.
  • Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, avionics, hydraulics, drive systems, brake systems, aircraft wire installation, Engine (build and install), Canopies and Doors.
  • Rotorcraft experience preferred.
  • A & P License preferred.
  • Must be capable of working 1st or 2nd shift.
  • Work week based on a 9/80 schedule with every other Friday off.


Prerequisites:
  • High School Diploma or GED required. 


 
Job Number: 1910101266
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 04/15/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eDDQAY&URLSource=cjhunter

Aircraft Electrician

Description:
Chipton-Ross is seeking 2 Aircraft Electricians located in New Orleans, LA

RESPONSIBILITIES:
Electrical

Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

REQUIRED EXPERIENCE:
Individuals must possess their own personal standard tools and possess personal factory shoes compliant with ANSI standards.

EDUCATION:
Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

Must be willing to work nights and overtime as required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Candidate may be asked to travel to other locations.

 
Job Number: 177272
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 02/20/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Technician Sr

Description:
PDS is seeking an Acft Tech Sr  for an open position in Savannah, GA.

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 

Principal Duties and Responsibilities:

Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
7. Coordinate movement of aircraft as required.
8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Functions:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned.
 

Education and Experience Requirements: 
High school diploma/GED. FAA Airframe and Powerplant Mechanic Certificate required.
Valid Drivers License required.
Four years of aviation maintenance experience to include 3 years of experience working on mid/large-size aircraft required.
Corporate aircraft experience preferred.
 
Other Requirements:
1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.



 



.


 
Job Number: 1910101920
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/09/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gJqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Antenna/Radome Electrical Engineer

Description:
*This is a full time, contract to hire position, located in Baltimore*



We are seeking an Electrical Engineer who specializes in antenna and radome design (and specification creation), measurement, development, test troubleshooting, and production.



Candidate will be involved in every facet of antenna work including preparing (and technical writing) of proposals, presentation of proposals to clients and internal staff, working through concept designs, materials and cost analysis, reporting and answering questions from clients and fellow stakeholders.



Required:
*5+ years working as an antenna or radome engineer
*Aerospace or RF antenna industry working in the Microwave (GHZ) frequency range
*Active Secret Clearance
*Familiar with preventive maintenance schedules for anechoic chamber test equipment.
*BS degree in engineering or physics



Plus:
*Experience with electromagnetic CAE tools such as HFSS and FEKO
*Knowledge of Orbit/FR positioning equipment and Keysight network analyzers.
 
Job Number: 633
Job Location: Baltimore, MD
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clark
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

AutoCAD Drafter

Description:
Chipton-Ross is seeking an A&E Services - Drafter located in Columbia, MD

RESPONSIBILITIES:
Within A/ES the drafter works as an integral team member and prepares various civil, structural, architectural, plumbing, mechanical, and electrical engineering 2D drawings and 3D Building Information Models (BIM). Work requires use of most conventional drafting and BIM techniques, and working knowledge of the terms and procedures of the architectural and engineering design, construction, and facility management industries. New or recurring work is assigned via various means; which may include written or verbal orders, methodology, procedures, data sources, and precedents to be followed. Drafter/Designer applies a general knowledge of design, construction and facility management necessary for preparation of documentation that comprises presentation drawings, all stages of design drawings, construction contract drawings, shop drawings and sketches, record drawings (as-builts), and facility management drawing with data links. Drawings and BIM models are prepared utilizing Autodesk AutoCAD and Revit, respectively.

REQUIRED EXPERIENCE:
MEP and/or architectural experience a plus.

EDUCATION:
Accredited Bachelor's Degree in related field.

WORK HOURS:
Part-Time/First Shift




 
Job Number: 177087
Job Location: Columbia, MD
Rate: $DOE
Duration: 12 months
Input Date: 02/12/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Aviation Electronics / Electrican Technician

Description:
Chipton-Ross is seeking 10 Aviation Electronics / Electrican Technician located in Lemoore, CA

RESPONSIBILITIES:
AVIATION ELECTRONICS/ELECTRICIAN TECHNICIAN (AT/AE). Electronics technician will have sufficient knowledge and skills, including in-depth system operation, diagnostic testing, troubleshooting, and repair procedures, to perform organizational maintenance for the following systems on the F/A-18E/F aircraft Multipurpose Display Group (MDG), Tactical Aircraft Moving Map Capability (TAMMAC) System, Mission Computer (MC)/FIBRE Channel Network (FCN) System, Communication Systems, Tactical Electronic Warfare Systems (TEWS), Sensor Systems, Stores Management System (SMS), Air-to-Air Weapons, Air-to-Ground Weapons, and Radio Detection and Ranging (RADAR). These skills are to be performed under limited supervision. Electrician technician will maintain electrical and instrument systems, including power generation, conversion, and distribution systems; aircraft batteries; interior and exterior lighting; electrical control of aircraft systems, including hydraulic, landing gear, flight control, utility, and power plant engine, flight and non-instrument-type indicating and warning systems; automatic flight control and stabilization systems; aircraft compass systems; attitude reference systems; and inertial navigation systems.

REQUIRED EXPERIENCE:
Knowledge of Safety Practices and Procedures - Required - Intermediate
Maintain safety and good housekeeping standards - Required - Intermediate

EDUCATION:
Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
6:00 AM - 3 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required - At the sole discretion of management, individual must be willing and able (on potentially short-notice) to deploy/travel to a variety of locations including NAS Whidbey Island, MCAS Miramar, and MCAS Beaufort (domestic and international) for a variety of deployment durations to meet customer needs and the statement of work. Unless compelling reasons exist, failure to deploy/travel will be considered as a resignation.

 
Job Number: 177276
Job Location: Lemoore, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 02/20/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 06/14/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Installer Sr.

Description:
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions: 1. Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. 2. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 3. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways 4. Assists Engineering in resolving problems and makes repairs per engineering direction. 5. Maintains required logs and records. 6. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 7. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 8. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Coordinate shift changes in team leaders absence. 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 4. Assists and fills in for team coordinator as required. 5. Performs other duties as assigned. 
Education and Experience Requirements:
High School diploma/GED. Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams.


Other Requirements:
1. Possess a working knowledge of the Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. 2. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. 3. Strong written and verbal skills required. 4. Computer keyboard skills necessary.
 

Unique Skills:



Assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems.


 
Job Number: 1910101557
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/02/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fNUQAY&URLSource=cjhunter

Avionics Tech I

Description:
PDS Tech is seeking Avionics Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:

1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting.
2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability.
7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:



A&P/FCC/NCATT preferred. Troubleshooting experience preferred. Must be willing to work any shift.


 
Job Number: 1910100665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/02/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cefQAA&URLSource=cjhunter

Avionics Technician

Description:
Our client in Tucson is in need of 10 Avionics Technician
In your role, you will:
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
  • Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment
  • Assist with mechanical / electrical removals and installations
  • Assist with aircraft component repair
  • Perform other duties as assigned


***Great hourly rate plus Time and a Half on Overtime!***
 



    Qualifications
    As our ideal candidate:
    • You have an A Certification
    • You have avionics / electric A/C Technical School or other substantiated equivalent
    • You have the ability to read and understand electrical engineering drawings
    • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
    • You have your own basic set of hand tools with the ability to demonstrate inventory and control of tools
    • You must obtain appropriate Ground Support Equipment Qualifications as required
    • You must be able to work unscheduled overtime including nonscheduled work days and holidays
    • You must be able to work in seasonal/inclement weather outside


    ***Great hourly rate plus Time and a Half on Overtime!***
     

     
    Job Number: 1810080242
    Job Location: Tucson, AZ
    Duration: 6 months
    Input Date: 04/12/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOvAAI&URLSource=cjhunter

    Avionics and Electrical Systems- UM

    Description:
    PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

    JOB RESPONSIBILITIES:

    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


     
     



     
    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

     
    Education and Experience:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    • Avionics and Electrical System DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

     
     
    Job Number: 1910097710
    Job Location: Wichita, KS
    Duration: 6 months
    Input Date: 03/14/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

    Avionics/Electrical Tech Sr

    Description:

    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
       


     


    Education and Experience Requirements:
    High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.

     

    Unique Skills:



    G650 experience preferred.



     


     

     
    Job Number: 1910101665
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/30/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

    Avionics/Electrical Tech Sr

    Description:

    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
       


     


    Education and Experience Requirements:
    High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.


    Unique Skills:
    Catia V5 and Solumina preferred not required

     
     


     

     
    Job Number: 1910101164
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/16/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0dQAA&URLSource=cjhunter

    Avionics/Electrical Tech Sr

    Description:

    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
       


     


    Education and Experience Requirements:
    High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.


    Unique Skills:
    Catia V5 and Solumina preferred not required

     
     


     

     
    Job Number: 1910101165
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/16/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ariel Palmer
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0iQAA&URLSource=cjhunter

    Avionics/Electrical Tech Sr

    Description:

     


    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA

    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
       


    For Additional Information on this Opening Please Contact Angela Burke: 
    Direct Number: 912-257-4939
    Email Your Updated Resume to aburke@pdstech.com

     


     



    Education and Experience Requirements:
    High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience.


    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.


    Unique Skills:
    Gulfstream aircraft avionics experience preferred.

    For Additional Information on this Opening Please Contact Angela Burke: 
    Direct Number: 912-257-4939 
    Email Your Updated Resume to aburke@pdstech.com

     
     


     

     
    Job Number: 1910100952
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Angela Burke
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dQ2QAI&URLSource=cjhunter

    Avionics/Electrical Design Engineer

    Description:
    Sign-on and Referral Bonuses - Many Openings, Multiple Programs, Excellent Rates

    BS degree plus 10 years of experience; complete complex development, design, testing, and certification assignments for new designs or modifications; CATIA V5 or V6 preferred
     
    Job Location: Midwest
    Input Date: 02/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Email: cecjwichita@pdstech.com
    Website: www.pdstech.com

    Avionics/Electrical Systems Engineer

    Description:
    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Duration: Long Term Contract
    Shift: First
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen****

    Required Skills:
    1. Strong technical skills aircraft Avionics/Electrical Systems
    2. The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
    3. Strong verbal and written communication skills.
    4. Due to the nature of the work candidates must be US Citizen

    Education:
    1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. See Other Requirements in Job Description.
    3. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    4. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Preferred Skills:
    1. Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing
    2. Familiarity with Airworthiness Authority regulations and showing compliance to such regulations
     
    Job Number: 10662
    Job Location: Savannah, GA
    Rate: $58.00 -$63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/22/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics/Electronic Systems Engineer

    Description:
    Job Details
    Special Missions - NON FAA - First shift is a 5 day work week, Overtime usually available.

    Unique Skills
    • Strong technical skills aircraft Avionics/Electrical Systems.
    • The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
    • Strong verbal and written communication skills.
    • Due to the nature of the work candidates must be US Citizen.
    • Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing.
    • Familiarity with Airworthiness Authority regulations and showing compliance to such regulations.

    Requirements
    • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-341
    Job Location: Savannah, GA
    Rate: $58 - $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 03/29/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    C++ SW Engr - Interim Clearance

    Description:
    PDS Tech, Inc. is seeking a SVTAD / Software Engineer, in Tewksbury, MA 01876

    NOTE: 12 Months Contract. Applicant must be a US Citizen  

    Job Description:

    • The successful candidate will be responsible for designing, implementing, debugging and fixing problems with the Radar software applications, as well as supporting software integration and verification efforts.
    • Our radar software applications, including implementations of signal processing algorithms and time critical control functions, involved in direct control of sensor systems,  are developed using C++ and Java programming languages running Linux or UNIX operating systems on a variety of computing platforms.
    • This position will also include working closely with Software Architects and Principal Systems, Hardware, and Software engineers to interpret requirements and correctly implement these requirements in software.
    • There are travel opportunities available to support the radar systems at various sites.U.S.
    • Citizenship status is required as this position needs  an active  U.S. Security Clearance within one year of  employment.

    Contact: skhan@pdstech.com/ Direct # 314-665-2124
    Required Skills:
    • 6 plus years’ experience on all phases of Software Engineering.
    • Experience with C++• Linux or UNIX experience
    • Experience developing software in a team based development environment, preferably Agile/SCRUM
    • Broad real-time, multi-threaded software development experience
    • Software development experience of a Signal Processing application
    • Experience in developing and optimizing algorithms for performance
    • US citizenship is required.
    • Interim Secret Clearance required to start.

    Desired Skills:

    • Excellent verbal and written communication skills
    • Experience in Agile development methods, including Scrum, automated testing and continuous integration
    • Software development experience in a DoD environment
    • Radar domain knowledge
    • Strong problem solving ability
    • Self-starter and ability to lead development, integration and test activities
    • Familiarity with the following Software Tools: Rational Rhapsody, Clear Case and Team Concert, Jenkins, DOORS
    • Strong Object-Oriented Design Knowledge including UML
    • Direct experience implementing complex signal processing algorithms in C++ meeting latency and throughput performance requirements or experience in implementing complex control operations in software with defined performance timelines• Master's Degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software Engineering
    • Current secret clearance or the ability to obtain a secret clearance

    Required Education (Including Major):

    • BS degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software EngineeringKEYWORDS:  C++, Linux, UNIX, Java, OOD,  real-time software development, Agile, Scrum, Signal Processing-DSP091417 source Code, Source Code DSPEVENTSRAYIDS  


     
     
    Job Number: 1810090261
    Job Location: Tewksbury, MA
    Duration: 12 months
    Input Date: 10/11/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sana Khan
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mjZkAAI&URLSource=cjhunter

    Capital Projects Execution Superintendent

    Description:
    ESSENTIAL JOB DUTIES/RESPONSIBILITIES: (functions considered essential as defined by ADA)
    • Directs day-to-day management of one or more aspects of the Capital Projects Department., including providing maintenance and equipment reports, scheduling, procedures, materials, crafts, contractors, equipment, union issues, personnel issues, safety issues, and planning
    • Provides strategic plans for department improvements
    • Ensures goals and targets are met by the group and reports project status to management on a regular basis; and is responsible for performance management including employee personal development and yearly performance evaluations
    • Provides input for departmental planning, budget monitoring and preparation, preparing annual budget items for capital project expenses
    • Oversees the performance of personnel including contractors which may include compliance with all federal, State, and Company policies and procedures
    • Ensures efficient/effective use of resources through the use of an effective work planning/scheduling process and contracting strategy
    • Ensures work performed is free of defects including development/implementation of best practices
    • Plan and execute capital projects and turnarounds
    • Thoroughly understand the contract documents, scope of work, specifications, and drawings on assigned projects.
    • Develop works scopes and supervise various staff such as Maintenance Supervisors, Maintenance Engineers, Warehouse Foremen, Pipe Fitter/Welders, Insulators, Instrument & Electrical crafts, Equipment Operator/Craft Helpers, and Yard Laborers
    • Maintain contractor and vendor relationships
    • Establish and communicate contractor performance expectations, monitoring for compliance and identifying gaps for management intervention; meet with contractor management as needed, and improve efficiency of contractor performance
    • Ensure that contractors maintain a current set of as-built drawings, and control master plan documents.
    • Ensure all work meets and or complies with standards and specifications.
    • Oversee procurement for the project ensuring best value purchasing of materials, equipment and subcontracts through competitive bidding and negotiation.
    • Prepare and submit for approval scope and contract change orders.
    • Oversee cost reporting to project managers: approve contractor timesheets: audit contractor timekeeping and work efficiency: and scope, review and approve contractor bids
    • Prepare a monthly forecast to complete for projects with input from subordinates to predict as accurately as possible the financial outcome of assigned projects incorporating changes in contract as well as changes in project conditions.
    • Oversee the completion of punch lists and project close-out.

    Prepare and maintain an overall project schedule and 2-3 week look ahead schedules.
      A minimum of 10 years of industrial project execution / maintenance experience or equivalent engineering experience, with five years of supervision experiences required depending on assignment
     
    EDUCATIONAL LEVEL:
    A minimum of a Bachelor's degree, preferably in a science or engineering related field, or an equivalent combination of education and work experience is required.
     
    REQUIRED SKILLS:
    Ability to lead and direct a large workforce of foreman, planners, contractors and craftsmen or other associates. Ability to oversee multi-discipline activities. Strong organizational skills; good computer and multi-tasking skills; and ability to effectively communicate with others, both verbal and written communication, with basic reading and writing skills. Ability to perform basic mathematical calculations. May require working knowledge of various functions including supervision, planning/scheduling, field execution, turnarounds, contract administration, and project management.
     
    PREFERRED SKILLS;
    Demonstrated knowledge of methods of construction practices and project execution. Practical knowledge of construction trades. Have excellent communication skills and related team-building skills required to instruct, motivate, and manage field employees and to communicate effectively. Work collaboratively in a team environment with a spirit of cooperation.
     
    SUPERVISORY/MANAGERIAL RESPONSIBILITIES:
    Responsible for the direct supervision of up to 15 employees and/or contract staff depending on location.
     
    Job Number: 1910097771
    Job Location: El Dorado, KS
    Duration: 6 months
    Input Date: 01/22/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9biQAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Catia V5 Instructor

    Description:
    Location: Tulsa, OK
    Rate: $60.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam. Candidate will support Engineers and be expected to answer questions intelligently in a class setting. This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support the company in Oklahoma.
    - CATIA v5 experienced with 5000+ hours.
    - All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
    - Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis.
    - Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
    - Quantitative experience with Geometric Dimensioning and Tolerances a plus.
    - Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
    - Formal Classroom instruction experience required for CATIA and PDM.

    Education and Experience Requirements:
    - Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    - See Other Requirements in Job Description.
    - 5 years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
    - Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 10486
    Job Location: Tulsa, OK
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/06/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Civil/Structural Designer

    Description:

    Designs components or portions of systems, and modifies existing designs to develop or improve them.
     Develops solutions to problems of unusual complexity that require a high degree of innovation and ingenuity. May lead a section or group of designers/drafters, usually on a single project.
    • Responsible for 3D modeling, preparing 2D drawings and drafting checking of process structures and modules, process and electrical equipment foundations for industrial facilities
    • Coordinate with other disciplines to develop design deliverables
    • Will have supervisory responsibility for drafting on project or at a program level
    • Perform material take-off, assemble estimate and construction packages, prepare professional service budgets and schedules, issue construction documents, participate in model reviews
    • Must be proficient in AutoCAD, CadWorx 


    Qualifications



    • Minimum of 10-15 years' of experience in civil and structural drafting and design of production facilities required
    • Associate's degree or 2 years of college course work is a plus
    • MS Office skills (Word, Excel, PowerPoint) required
    • Excellent oral and written communication skills required




     
    Job Number: 1910101424
    Job Location: El Dorado, KS
    Duration: 12 months
    Input Date: 04/16/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eXcQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Design Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Unique Skills:
    • Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
    • Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Perform other duties as assigned.
    • Advanced degree in engineering, or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-344
    Job Location: Savannah, GA
    Rate: $58
    Per Diem: YES
    Overtime: YES
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 05/20/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Control System Engineer

    Description:

    Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.



    The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.



    The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.  



    • Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
    • This activity includes:
      1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
      2. Support electrical qualification discussions for FPS components.
      3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
      4. As required, conduct interface meetings with the FPS component suppliers.
      5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
      6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
      7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
      8. Review supplier TSO and create TSO report
      9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
      10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
      11. Perform or assist with inspections and on-aircraft troubleshooting.
      12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
      13. Lead resolution of design challenges and any issues relate to aircraft certification.
      14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
      15. Be fully involved in supporting the Design Change process and activity.
      16. Perform other related tasks as assigned by the Team Leader.

    • Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan. 
    • The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

    • Work Experience and Skillset:
      1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
      2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
      3. Over 5 years experienced for designated design area.


     
    Job Number: 1810094281
    Job Location: Nagoya,
    Duration: 18 months
    Input Date: 10/16/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

    Controls Engineer

    Description:
    PDS Tech, Inc. is seeking a Control Engineer in Auburn Hills, MI.

    Summary:

     
    • The Controls Engineer will work to develop machine and process concepts along with several Manufacturing Engineering peers. Candidate will create a robust system architecture to support the concept, and then layout electrical/pneumatic schematics. Once the electrical panel is built, he/she will program all controls components such as PLC, safety devices, HMI, servo drives, process hardware and robots from power-on to debug, and finally to process fine tuning and validation.  The Controls Engineer will also work with cross-functional teams throughout the entire lifecycle of the product and processes. He/She will work closely with Product Design Engineering, Quality, Production and Maintenance to bring components from initial design, through prototype development and finally into full production.

    Responsibilities:

    In-house equipment development:

    • Participate in initial equipment conceptual development and carefully balance product specifications, process control requirements, layout complexity, cost, quality and lead-time limits.
    • Lay out new industrial electrical control panels which are NFPA79/NEC/UL508A compliant, and create electrical, pneumatic and fluid schematics.
    • Architect, write, and debug PLC ladder logic with an emphasis on generating code that is organized, structured, documented, maintainable and reusable. PLC code will interact with subsystems such as conveyors, robots, Manufacturing Execution System (MES), LabView, machine vision, and 3rd party equipment.
    • Implement (ANSI/RIA15.06/OSHA compliant) control reliable safety systems for safeguarding robots, gantries, conveyors, and other high volume manufacturing equipment.
    • Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting.
    • Manage electrical cabinet builds, field wiring, pneumatic and fluid plumbing.
    • Select and size electrical and electromechanical components such as servos.
    • Introduce automated processes into production, and train and Maintenance and Production Teams to support after deployment into production.
    • Create machine interactions with plant-wide Manufacturing Execution System (MES) to communicate product acceptability, machine status, and process variables.

    Outsourced automation equipment development:

    • Participate in specification and standard creation, release to Vendor and quote technical evaluation.
    • Enforce application of standards, Manage suppliers during specification, design review, design approval.
    • Establish test plans and control test plan execution at Vendor and at Company facility during installation and buy-off.
    • Characterize and validate new automated process equipment for deployment into production.

    Existing automation equipment refinement:

    • Debug and optimize automated processes to maximize cycle time, improve availability and yield.
    • Characterize and validate automated processes using a data driven approach such as simulation, Capacity and Capability statistical test (Gage Repeatability and Reproducibility test, Cpk, etc).
    • Assembly Line Development and Implementation.
    • Create detailed utility layouts for entire assembly lines and interface with facilities teams for implementation.
    • Create data management and tracking communications network architecture and interface with cross-functional teams for product, processes and quality traceability control implementation.

    Requirements:
    • Proficiency with process integration and electromechanical/mechatronic systems.
    • In depth knowledge of Electrical Standards (NFPA79, National Electric code, UL508A).
    • In depth knowledge of Safety standards (ANSI/RIA15.06, OSHA).
    • Advanced proficiency programming industrial equipment: Ladder logic PLCs (Allen Bradley ControlLogix, CompactLogix and RSLogix 5000); Safety PLCs (Allen Bradley ControlLogix, SmartGuard); Human Machine Interface (HMI/GUI - AB Panelview, FactoryTalk, LabView, Ignition); Field bus Networks (AB DeviceNet, Ethernet IP, Safety rated field bus networks); & Ethernet communications between machine PLCs and database systems.
    • Demonstrated excellence in programming PLCs.
    • Must have a well-defined methodology for maintaining code structure and organization.
    • Ability to program state machines for complex processes which involve multi-station parallel. processing, pick and place automation, data acquisition, and PID control.
    • Proven ability to design fault-tolerant systems with error handling and recovery.

     Qualifications:

    • BS/MS Electrical Engineering (or equivalent – Majors in: Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, etc.), or equivalent experience.
    • 5+ years of experience as a hands-on Controls Engineer or Applications Engineer working on automation and/or electromechanical systems.
    • Experience managing capital projects and vendors.

     
    Job Number: 1910101871
    Job Location: Auburn Hills, MI
    Duration: 12 months
    Input Date: 05/10/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Alex Lieberman
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gEVQAY&URLSource=cjhunter

    Design Engineer

    Description:
    Chipton-Ross is seeking a Design Engineer for an opening in Arlington, TX.

    RESPONSIBILITIES:
    Designs, researches and develops structural engineering layouts, components and assemblies involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Develops and maintains engineering bills of material and product structures. Coordinates the inputs of a variety of disciplines including stress, manufacturing engineering and product support to ensure all engineering requirements are incorporated into the design. Specific design engineering specialties may include airframe, mechanisms and subsystems installations. Tools utilized include CATIA and Enovia (3D Experience).

    REQUIRED EXPERIENCE:
    Complete understanding and wide application of technical principles, theories, and concepts in the field. General knowledge of other related disciplines. Provide technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organization objectives. Works under supervision of direct company design lead. Work is reviewed upon completion for adequacy in meeting objectives.

    EDUCATION:
    Accredited Bachelor's degree or equivalent and six (6) years of related experience.

    WORK HOURS:
    Full-Time

     
    Job Number: 178035
    Job Location: Arlington, TX
    Rate: Up to $60.00 DOE
    Duration: 6+ Months
    Input Date: 03/19/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 3 Diagnostic Modeling Analysis openings in Hazelwood, MO.

    RESPONSIBILITIES:
    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
    The chosen candidate will work with the latest generations of aircraft platforms (both commercial and military). The chosen candidate should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). The chosen candidate will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning. Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    TRAVEL: 10%

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 4:30 PM


     
    Job Number: 179056
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/30/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 2 Design and Analysis Engineer 3 located in Oklahoma City, OK

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:00 PM

     
    Job Number: 177778
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/11/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    E-Drive Integration Engineer

    Description:
    PDS Tech, Inc. is seeking an E-Drive Integration Engineer in Auburn Hills, MI.

    Summary:

    • E-Motor hubs packaging verification, and release for prototype and production to specific customer applications.
    • Verifies torque control, power management, and thermal management of the E-Motor hubs and e-drive system.
    • Testing and validation of motor control and motor sensor subsystem requirements.
    • Diagnoses and corrects deficiencies in designs and prototypes.
    • Understands test machine requirements and instrumentation.
    • Support for motor control and motor sensing subsystem analysis, modeling, and design.
    • Design and optimizes the e-drive system including packaging and development of CVT in cooperation with the supplier.
    • Dynamic lean design and optimization
    • Designs and optimizes simultaneous system performance goals through requirements flow down.
    • Effectively integrates all aspects of a design using multi-disciplinary engineering.
    • Understands and creates system and subsystem specifications.
    • Assists in maintaining cost controls.
    • Familiar with preliminary analysis and simulation to detect stresses conditions on subsystems and on component design level.
    • Experience with design, development, validation and integration.
    • Basic skills in analysis and simulation parameters to set up through the CAD models. Familiar with the mains manufacturing processes: sand casting, die casting, injection plastic components, sheet metal forming, gravity casting.

    Qualifications / Education:
    • BS in Electrical Engineering or Mechanical Engineering required with emphasis in electric machines and drives, magnetic sensing subsystems, embedded systems, and/or electromagnetics preferred.
    • Five years’ experience working with e-drive systems.
    • Strong computer skills and knowledge of design and simulation tools (e.g. Catia V5, NX,) is required.
    • Able to generate 3D math models and 2D prints for complex parts.
    • General competency in all core fields (electronics, electromagnetics, computer hardware and software) is preferred.
    • Excellent problem-solving techniques.
    • Knowledge of system synthesis, analysis and verification techniques.
    • Good organization and documentation abilities.
    • Must be able to view a computer screen or monitor for extended periods of time.
    • Must be able to sit or stand for extended periods of time.

     
    Job Number: 1910102061
    Job Location: Auburn Hills, MI
    Duration: 12 months
    Input Date: 05/07/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Katie Windhurst
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjZQAQ&URLSource=cjhunter

    ECS System Engineer - UM

    Description:
    PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

    Job Responsibilities:
     JOB RESPONSIBILITIES:
    • Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
    • Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
    • Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
    • Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

    EDUCATION / EXPERIENCE:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs



     
     



     
    JOB QUALIFICATIONS:
    • Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
    • Experience with domestic and foreign aircraft certification process is desired.
    • Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
    • A working knowledge of DO-178 & DO-254 is desired.
    • Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Ability to use Reliability Workbench (Fault Tree+) is desired.
    • Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

     
    Job Number: 1910097709
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 01/24/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EE Technical Designers in Tukwila, WA

    Description:
    EE Technical Designers Level (2, 3)

    Location: Tukwila, WA
    Duration: 6+ months

    Description:
    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    The Electrical Engineering Technical Designer will be supporting primarily BDS and BCA programs and may need to support in an office setting as well as a factory and flight line setting.

    Education / Experience:
    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    Skill Code: 625-Electronic/Electrical Design
     
    Job Location: Tukwila, WA
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 01/24/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    EHI Engineers

    Description:
    Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
     
    Job Location: Savannah, GA
    Input Date: 07/07/2014
    Firm Name: INCONEN CORPORATION
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: cathy@inconen.com
    Website: www.inconen.com

    EWIS Expert

    Description:
    Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
    This position is located in Nagoya, Japan.  

    As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
     
    Scope of Work:
             Work as Global engineering expert as part of the EWIS team
             Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
             This activity includes:



    • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
    • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
    • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
    • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
    • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
    • Coaching and Education of company members about professional knowledge in the EWIS domain.
    • Interface with other suppliers as appropriate.
    • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
       


     



     
    Job Number: 1710075244
    Job Location: Nagoya,
    Duration: 12 months
    Input Date: 03/16/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

    Egress Technician

    Description:
    PDS Tech, Inc. is seeking a Egress Technician in Jacksonville, FL.

    Summary:

    • General This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty.
    • Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
    • Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions.
    • Applies required expertise in restoring equipment condition and or operation.
    • Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures manuals.

    Education and/or Training Requirements:

    Mechanic must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Must be able to Jack, Tow, and Operate various types of support at required to meet program needs. Mechanic may be required to become ordinance certified for Aviation Life Support Systems Maintenance was required.


    ** Must have Formal Military Training on the ACES II Ejection System**

    **Must have experience with Removal and Installation of Ejection Seat, Canopy, Parachute, Survival Kit, CRU-60/94**


    Experience Required: 

    Position requires 4+ years of experience in those duties as previously on the F-16 Platform.
    Recent F-16 or other fighter aircraft experience preferred.
    Must have formal ACES II Military education or equivalent.
    Must have 4+ Years of Experience working to Military Tech Data in the execution of ACES II system maintenance.


    Occupation or Operation Requirement:
     
    Job Number: 1910099978
    Job Location: Jacksonville, FL
    Duration: 12 months
    Input Date: 03/18/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Michael Coonce
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYL5QAM&URLSource=cjhunter

    Electrical Avionics Technician

    Description:
    Chipton-Ross is seeking an Electrical/Avionic Technician for an opportunity in Edwards AFB, CA

    RESPONSIBILITIES:
    Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

    Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

    Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

    Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
    Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

    PHYSICAL REQUIREMENTS:
    In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

    REQUIRED EXPERIENCE:
    Candidate must have a minimum of 8 years' experience in fighter aircraft electrical maintenance
    Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
    F-22 Electrical/Avionic system experience is preferred
    F-22 Low Observable materials application (Desired not required)

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    Full-Time/First Shift

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 177948
    Job Location: Edwards AFB, CA
    Rate: $DOE
    Duration: 11 months
    Input Date: 03/15/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Electrical / Avionic Technician / 2 to 3 years’ of fighter aircraft electrical maintenance experience required - Clearance URGENT CA

    Description:
    Electrical/Avionic Technician
    **2 to 3 years’ of fighter aircraft electrical maintenance experience required

    Work Site Address: Edwards AFB, CA 93523
    Max Pay Rate: $31.85/hr
    Start Date: May 2019
    End Date: 11 months
    Position Type: Contract
    2 openings

    Job Summary:
    Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

    Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

    Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

    Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.

    Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

    Candidate must have a minimum of 2 years’ experience in fighter aircraft electrical maintenance

    Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.

    F-22 Electrical/Avionic system experience is preferred
    F-22 Low Observable materials application (Desired not required)

    In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
     
    Job Number: LM-001S
    Job Location: Edwards AFB, CA
    Rate: 31.85/hr max
    Per Diem: yes
    Duration: 11 months
    Input Date: 05/22/2019
    Last Updated: 06/13/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Electrical Applications Engineers

    Description:
    Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
     
    Job Location: Savannah, GA
    Input Date: 07/07/2014
    Firm Name: INCONEN CORPORATION
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: cathy@inconen.com
    Website: www.inconen.com

    Electrical Building Designer -- Mid-Level

    Description:

     
    Job Location: Braintree, MA
    Input Date: 06/12/2018
    Firm Name: NESC STAFFING
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    800 Phone: 800/562-3463
    Email: lokeefe@nesc.com
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Ability to obtain a security clearance

    Experience with Mentor Graphics DxDesigner schematic capture, PADS
    Experience with analog and digital circuit design, including PCB design.
    Experience with single board computers and microcontrollers.
    Experience with FPGA design and simulation, VHDL
    Experience with analog and digital video circuits.
    Experience with display technologies and video distribution techniques preferred.
     
    Job Number: 46556
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 05/01/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Ability to obtain a security clearance

    Experience with Mentor Graphics DxDesigner schematic capture, PADS
    Experience with analog and digital circuit design, including PCB design.
    Experience with single board computers and microcontrollers.
    Experience with FPGA design and simulation, VHDL
    Experience with analog and digital video circuits.
    Experience with display technologies and video distribution techniques preferred.
     
    Job Number: 46556
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 05/01/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Ability to obtain a security clearance

    Experience with Mentor Graphics DxDesigner schematic capture, PADS
    Experience with analog and digital circuit design, including PCB design.
    Experience with single board computers and microcontrollers.
    Experience with FPGA design and simulation, VHDL
    Experience with analog and digital video circuits.
    Experience with display technologies and video distribution techniques preferred.
     
    Job Number: 46556
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 05/01/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer Military Wire Harness

    Description:
    *This is a full time, 8 month contract, located in Palmdale, CA*



    We are hiring for an Electrical Design Engineer specialized in designing and testing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



    Required:
    *9 years’ experience in electrical military aircraft design 3D software.

    *Experience with ANSI/ASME Y14.100 or similar design/drafting standards
    *Experience reading and creating electrical drawing schematics for wire harness assemblies

    *Wiring implementation and test experience
    *Per diem split is available for those travelling for this position
    *Current Active Secret Clearance (and recently investigated within the last 5 years)
    *May need to work 2nd and weekend shifts if needed (in addition to 1st shift)



    Plus:

    *Catia V5 knowledge
     
    Job Number: 165
    Job Location: Palmdale, CA
    Input Date: 05/08/2019
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer Military Wire Harness (158)

    Description:
    *This is a full time, 8 month contract, located in Palmdale, CA*



    We are hiring for an Electrical Design Engineer specialized in designing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



    Required:
    *9 years’ experience in electrical military aircraft design 3D software.

    *Experience with ANSI/ASME Y14.100 or similar design/drafting standards
    *Experience reading and creating electrical drawing schematics for wire harness assemblies
    *Per diem split is available for those travelling for this position
    *Current Active Secret Clearance (and recently investigated within the last 5 years)
    *Ability to work 2nd and weekend shifts if needed (in addition to 1st shift)



    Plus:

    *Catia V5 knowledge
     
    Job Number: 158
    Job Location: Palmdale, CA
    Input Date: 05/07/2019
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design and Analysis Engineer 3

    Description:
    Design and Analysis Engineer 3

    Location: Oklahoma City, OK
    Duration: 6+ months

    Job Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Required:
    Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

    Task assignments:
    - Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
    - Work with a supplier to select new IDGs that fit the new engine capabilities
    - Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
    - Assess impacts to wires, and subsystem power feeders
    - Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
    - Develop Power design reports and system design budget

    Education / Experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Skill Code: 622-Electrical Systems Design
     
    Job Location: Oklahoma City, OK
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 12/13/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

    Description:
    Design and Analysis Engineer 4

    Location: Huntington Beach, CA
    Duration: 6+ months

    Description:
    Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

    Required Skills:
    Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

    Preferred Additional Skills:
    Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

    Education / Experience:
    Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code:
    664-Electronic Sys Design & Analy
     
    Job Location: Huntington Beach, CA
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 09/13/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    Electrical Designer

    Description:

    This individual works in conjunction with the Electrical Engineer and is Responsible for detailed design and documentation
    of electrical power and control wiring, instrumentation loops, electrical schematics, cable tray layout, instrumentation and
    electrical details, and cable schedules. 10+ years of CAD design/drafting experience, with a good background in instrumentation
    and control system design. AutoCAD experience preferred.



    This individual works in conjunction with the Electrical Engineer and is Responsible for detailed design and
    documentation of electrical power and control wiring, instrumentation loops, electrical schematics, cable tray layout,
    instrumentation and electrical details, and cable schedules. 10+ years of CAD design/drafting experience,
    with a good background in instrumentation and control system design. AutoCAD experience preferred.


     
    Job Number: 1910100469
    Job Location: Mount Vernon, IN
    Duration: 6 months
    Input Date: 03/28/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cBDQAY&URLSource=cjhunter

    Electrical Engineer

    Description:

    PDS Tech is seeking an Electrical Engineer in Florence SC.



     



    The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.



     



    This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments. 



     



    The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions.  Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.


    Experience/Qualifications:
    • MA/MS degree with 1 to 2+ years’ experience BA/BS degree with 2 to 5+ years’ experience.

    Preferred Skills:

    • Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic.
    • Control System Logic and Power Electronics.
    • Ability to work with suppliers/3rd parties.
    • Experience with test and measurement equipment.
    • Understanding of mechanical and software functions. 
    • ECAD tools (Cadence, E3, or others). 
    • Strong communications skills and leadership ability. 
    • MS Office applications (Word, Excel, Power Point, etc.).

     
    Job Number: 1910102093
    Job Location: Florence, SC
    Duration: 7 months
    Input Date: 05/15/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gmOQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Our client is looking for an Electrical Engineer to work in Santa Barbara! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

    The ideal candidate for this position will perform the following tasks:
    * Analog and digital electronics, PCB, Verilog, FPGA Design Engineer.
    * Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

    Mandatory Qualifications and Experience:
    * Electronic Circuit Design Engineer.
    * Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required.
    * Excellent communication skills.
    * Requirements flow down preparing and presenting design reviews

    Desired Qualifications and Experience:
    * Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design.
    * Test engineering experience - hands on with laboratory test equipment.
    * Integrated circuit design. MATLAB, C++, and other programming.
    * Proficient with electronic design and simulation tools.

    Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
     
    Job Number: 130368
    Job Location: Santa Barbara, CA
    Duration: 11 months
    Start Date: ASAP
    Input Date: 05/10/2019
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Gary Kidd
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    Electrical Engineer

    Description:
    The successful candidate will design and develop robotic solutions for ground combat vehicles. Your work will entail everything from first concepts, to the development and deployment of these advanced systems. The designs may range from semi-autonomous to fully autonomous capabilities leveraging the latest in technology

    Experience with Altium
    Experience with network and protocol test tools such as CANoe, CANalyzer, WireShark
    Experience with one or more RTOS (Linux, QNX, VxWorks)
    Experience with OSEK-compliant embedded RTOS or similar
    Experience using the UNITY simulation engine
    MATLAB & Simulink
     
    Job Number: 46631
    Job Location: MD
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 06/03/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Email: mswift@thepanthergrp.com
    Website: www.thepanthergrp.com

    Electrical Engineer

    Description:
    PDS Tech, Inc. is seeking an Electrical Engineer in Auburn Hills, MI.

    Summary:

    • Develop, validate and integrate the functionality of e-motor hub system, dynamic lean system, integrated display unit, and sensors.
    • In charge to integrate the software platform for infotainment, vehicle performance monitoring, torque and power distribution
    • Development of the powertrain sensors and controllers
    • Development of the strategy for the dynamic lean system; step by step electrical motor to balance the vehicle under specific conditions and loads
    • Lighting/signals subsystem development

    Qualifications/Education:
    • Bachelor’s degree in Electrical or Mechanical Engineering.
    • 5+ years’ experience and capability to work with various data acquisition tools.
    • 5+ years’ experience with Matlab or equivalent tools.
    • 5+ years’ experience with sensor development.
    • 5+ years’ experience with controls.
    • Strong mechanical understanding or Mechanical engineering background with strong electrical understanding is preferred.
    • Must be able to manage multiple concurrent assignments with proper prioritization.
    • Excellent interpersonal and collaborative skills are necessary to be successful in this position.
    • Proactive approach to evaluate efficient and innovative solutions even to quickly troubleshoot urgent situations.

     
    Job Number: 1910102060
    Job Location: Auburn Hills, MI
    Duration: 12 months
    Input Date: 05/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Katie Windhurst
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjUQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Designs and tests Electrical system, components, equipment, and networks for air vehicle. The applicant must have extensive experience in Wiring Harness Design, Build, and Test. Considered a Subject Matter Expert (SME) in the area of Harness Design and Build. Able to evaluate COTS electrical wiring and harness assembly diagram for build and integration. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness. Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to client Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.

    Extensive experience with connector selection, relay logic, part selection, wire sizing, harness design process
    Experience with Design, Implementation and Test experience with aircraft harnesses required.
     
    Job Number: 06787
    Job Location: Palmdale, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 6 months
    Start Date: ASAP
    Input Date: 05/07/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Pritam Prince
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Position : Electrical Engineer
    Location: Palmdale, CA
    Duration: 6-7 months
    Client : Biggest Aerospace and Defense

    Job Description:
    Designs and tests Electrical system, components, equipment, and networks for air vehicle. The applicant must have extensive experience in Wiring Harness Design, Build, and Test. Considered a Subject Matter Expert (SME) in the area of Harness Design and Build. Able to evaluate COTS electrical wiring and harness assembly diagram for build and integration. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness. Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to client Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.

    Extensive experience with connector selection, relay logic, part selection, wire sizing, harness design process
    Experience with Design, Implementation and Test experience with aircraft harnesses required.
     
    Job Number: 19-06787
    Job Location: Palmdale, CA
    Rate: Open
    Per Diem: YES
    Overtime: Possible
    Duration: 6 Months
    Start Date: ASAP
    Input Date: 05/07/2019
    Firm Name: ICONMA LLC
    Attention: Rohit
    Address: 1201 PACIFIC AVE STE 600
    City, State: TACOMA, WA 98402
    Phone: 253/213-2012
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Candidate must possess an Active Secret Security Clearance
    Job Responsibilities:
    Candidate will evaluate, select, and apply electrical engineering methods, techniques, procedures and criteria, using independent judgment in making adaptations and modifications.
    Candidate will perform work which involves the preparation, interpretation or review of specifications, plans, associated with C2 systems or equipment.
    Candidate will conduct electrical systems analyses and design calculations.
    Candidate will prepare designs, drawings and data.
    Candidate will prepare engineering studies and reports.
    Candidate will use engineering Computer Aided Design/Computer Aided Engineering (CAD/CAE) tools.
    Job Qualifications:
    Candidate is desired to have a Bachelor of Science degree in a related field.
    Candidate is desired to have experience with the Integrated Air and Missile Defense (AMD) as well as Army/Joint Command and Command (C2) systems.
    Candidate must have good writing/communications skills as well as being able to interface with internal and external customers and users.
     
    Job Number: 34884
    Job Location: Huntsville, AL
    Duration: TTH
    Input Date: 05/06/2019
    Firm Name: TAD PGS INC
    Attention: Kim Silcott
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 714/622-3967
    800 Phone: 800/261-3779
    Fax Phone: 714/897-8455
    Website: www.tadpgs.com

    Electrical Engineer

    Description:
    PDS Tech Inc is seeking an Electrical Engineer, in Wichita, KS    
    • Job Responsibilities: 

      • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft. 

      • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. 

      • Develops creative, scientific alternatives during course of job assignments to reach desired outcome. 

      • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents. 

      • Maintain a high degree of proficiency in computer applications to accomplish tasks. 

      • Coordinates with direct and indirect customers and suppliers to determine system requirements. 

      • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues. 

      • Consults with supplier to discuss and remedy issues in a timely and efficient manner. 

      • Provides guidance to lower grade engineers in the solution of complex design problems. 

      • Reviews and evaluates supplier proposals for potential utilization on future models. 

      • Performs above work utilizing frequent application of in-depth engineering principles. 

      • Assures supervision awareness of program status, problems and successes. 

      • Provides periodic design reviews and update presentations to management of engineering and other company organizations. 

       
    • Education/Experience: 

      • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required 

      • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired 

      • Minimum 7 years of experience in General Aviation or Business Aircraft development programs 

    Qualifications: 

    • Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred 
    * Experience with DO-178
    * Experience with LDRA


    • Ability to read and produce wiring drawings using standard industry practices 

    • Experience with electronic test equipment 

    • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred 

    • Skills in Microsoft Office suite software 

    • C/C++ and assembly programming experience preferred 

    • Visual Programming language preferred 

    • Excellent written and verbal communication skills 

    • Strong analytical and problem solving skills
     
    Job Number: 1910101471
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 04/29/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eqEQAQ&URLSource=cjhunter

    Electrical Engineer

    Description:
    Location: Palmdale, CA
    Rate: $70.00 - $120.00/HR
    Duration: 5 month contract
    Shift: 1st Shift
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

    Job Description:
    - Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
    - The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
    - Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
    - Experience with System Integration of Hardware in a simulation test environment is desired.
    - Able to evaluate electrical wiring and harness assembly diagram for build and integration.
    - Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
    - Make real-time design modification to resolve issues, and update design documents to reflect changes.
    -Able to work in a Shop (Prototype) environment and with interacting with technicians.

    Duties include:
    - Creating wiring diagrams and harness assembly diagrams
    - Resolving wiring/integration related issues between the various avionics/electrical systems
    - Validating/interpreting/troubleshooting/resolving any wiring related issues
    - Performing technical checks to ensure wiring document correctness
    - Providing engineering sign-off on all new/revised manufacturing wiring documents
    - Termination Aids (TAs) and Wire Harness Master (WHM) sketches

    Education:
    - Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
    - Experience with Design, Implementation and Test experience with aircraft harnesses required.
     
    Job Number: 10234
    Job Location: Palmdale, CA
    Rate: $70.00 - $120.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 5 mos
    Input Date: 04/22/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Description:
    AutoCad required. CHS experience preferred. 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:

    Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Advanced degree in engineering or related curriculum preferred

    The Structures Company is an AA/EOE.
     
    Job Number: 289
    Job Location: GA
    Rate: Up to $68/Hr.
    Per Diem: Yes
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 06/06/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electrical Engineer

    Description:


    Typical responsibilities of the Electrical Engineer within the department include all aspects of the design related to: power distribution and motor control systems, (e.g. motor control centers, distribution equipment, generators, etc); power utilization equipment and devices; building and area lighting; grounding and cathodic protection; communications, alarms, and security systems; electrical heat tracing; and demolition of electrical items.
    The design duties of the electrical engineers and designers include: the production of drawings; specifying electrical equipment and devices; generating request for proposals; generating purchase documentation; reviewing electrical vendor data submittals to insure technical compliance with the specifications; generating material takeoffs that may be used to estimate material and labor requirements for the project cost estimate; generating electrical control documents such as circuit schedules, load lists, motor lists and participating in constructability reviews. This group may also be called upon to provide field assistance during the construction and startup efforts.
     
    Primary duties include preparation of drawings and documentation for power distribution, lighting, motor controls, communications, heat tracing, grounding systems, instrumentation plans, circuit schedules and instrument loop drawings. BSEE degree and excellent communication skills required, as well as ability to function in a team environment.
     
    Job Number: 1910100475
    Job Location: Mount Vernon, IN
    Duration: 6 months
    Input Date: 04/05/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cC6QAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Location: Savannah, GA
    Rate: $68.00/HR
    Duration: Long Term Contract
    Shift: 4x10
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCad required. CHS experience preferred
    2. Company Completions electrical system design experience preferred.
    3. 14 CFR 25 Subpart H - EWIS experience preferred
    4. Part 25 Certification Experience for Cabin Interiors preferred
    5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6. Experience with power distribution, lighting, switching, sizing, and routing required.
    7. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8. Familiarity with aircraft STC procedures preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Responsible for an entire engineering project of major complexity within established scope
    2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    4. Leads the development of innovative principles and ideas
    5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    6. Works under consultative direction; uses independent judgment to accomplish objectives
    7. Develops standards and guides for diverse engineering activities
    8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10651
    Job Location: Savannah, GA
    Rate: $68.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/20/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Engineer 4

    Description:
    Unique Skills:
    • AutoCad required, Catia V5 and CHS preferred.
    • GV,GVI, electrical system design experience preferred.
    • 14 CFR 25 Subpart H - EWIS experience preferred
    • Part 25 Certification Experience for Cabin Interiors preferred
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, sizing and routing.
    • Familiarity in mechanical system design
    • Familiarity with aircraft STC procedures preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    • Responsible for an entire engineering project of major complexity within established scope
    • Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    • Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    • Leads the development of innovative principles and ideas
    • Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    • Works under consultative direction; uses independent judgment to accomplish objectives
    • Develops standards and guides for diverse engineering activities
    • Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
    • Advanced degree in engineering or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-362
    Job Location: Savannah, GA
    Rate: $58 - $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 06/07/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Electrical Engineer

    Description:
    FPGA verification, ASIC verification, CPLD
     
    Job Number: 46565
    Job Location: Florida
    Input Date: 03/18/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Email: jpyle@apollopros.com
    Website: www.apollopros.com

    Electrical Engineer

    Description:
    BS degree in computer engineering or electrical engineering; experience with digital circuit/logic design; familiar, within the last 3 years, with Quartus Prime Pro; ability to program in high-level languages: Verilog, SystemVerilog, VHDL, etc


    Contact one of our recruiters for more information on the above job and many more!

    David Dodson - ddodson@teamglobal.com
    Gary Kidd - gkidd@teamglobal.com
    Mark Milligan - mmilliga@teamglobal.com
    Sanjat Khatri - skhatri@teamglobal.com
     
    Job Location: Owego, NY
    Input Date: 01/28/2019
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    Email: gcpjobs@teamglobal.com
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Detail oriented engineer with experience in the design of cables and harnesses for high reliability applications in harsh environments. AutoCAD required. The engineer shall work under the direction of a design lead, and create cable and harness assembly designs using MIL-SPEC components. Select the appropriate components including connectors, backshells, and cable. Perform analysis to determine the appropriate strain relief and sealing sizes. Create detailed design assembly drawings. Work with 3D routing modeler on the installation plan. Create wirelists and schematics. Update system level and hardware schematics. Create reference designator marking methods. Perform the proper wire shield termination for EMI/TEMPEST control.

    Skill/Experience/Education:
    Mandatory:
    AutoCAD. Knowledge of Cable Design

    Desired:
    Experience in Marine Applications. . Experience in undersea molded cable assemblies, potting compounds, fiber optics, Oil Filled pressure tolerant cable assemblies is also desired.
     
    Job Number: 18867
    Job Location: West Palm Beach, FL
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 6 months
    Start Date: ASAP
    Input Date: 11/08/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Pritam Prince
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    Electrical Engineer

    Description:
    Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

    RESPONSIBILITIES:
    Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

    REQUIRED EXPERIENCE:
    Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

    ADDITIONAL EXPERIENCE:
    It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

    EDUCATION:
    Bachelor's of Electrical Engineering

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 155942
    Job Location: Avondale, LA
    Rate: $42 to $46.00 DOE
    Duration: 1 year
    Input Date: 06/03/2016
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Andrew Craft
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: acraft@chiptonross.com
    Website: www.chiptonross.com

    Electrical Engineer (2) - SC

    Description:
    Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

    RESPONSIBILITIES:
    looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
    The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

    REQUIRED EXPERIENCE:
    Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
    "Must be experienced with Engineering design software for electrical design.
    "Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
    "Experience with aircraft architectures and electrical integration of avionics subsystems

    EDUCATION:
    Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

    WORK HOURS:
    Full-Time/First Shift 0630-1600

     
    Job Number: 176357
    Job Location: Greenville, SC
    Rate: $DOE
    Duration: 12 MONTHS
    Input Date: 04/04/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Patrick Costello
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: pcostello@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - AutoCAD

    Description:
    1) AutoCad required. CHS experience preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.
     
    Job Number: 19-144018
    Job Location: GA
    Rate: $68.00
    Per Diem: Yes
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2019
    Last Updated: 05/14/2019
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Electrical Engineer / wiring harness - Clearance CA

    Description:
    Electrical Engineer
    Work Location: Palmdale, CA
    Status: Open

    Qty: 2
    Desired Start Date: 1/14/2019
    End Date: 9/27/2019

    Job Description:
    Researches, develops, designs, and tests electrical system, components, equipment, and networks for Military air vehicle. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches). Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.

    Candidate MUST be willing to work 1, or 2 shift and weekend, as needed.

    CNE Work Location: Palmdale, CA
    Level 3: BS+9-15 YRS or MS+7-13 YRS
    Pay Rate: $59.00 Hourly
     
    Job Number: JE-1302-1S5
    Job Location: Palmdale, CA
    Rate: 59/hr max
    Per Diem: no
    Duration: 9 months
    Input Date: 04/18/2019
    Last Updated: 06/13/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer Design 2 / no clearance / URGENT CA

    Description:
    Electrical Engineer Design 2 (Job Number: 19006187)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach


    Shift: 1st Shift

    Target Start Date: Apr 29, 2019

    Target End Date: Apr 24, 2020

    Pay Rate: $42 top $44/hr
    Location: Manhattan Beach, CA
    Work Schedule: 9/80
    Duration: 1 Year

    NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

    Job Description:

    The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
    Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

    Basic Qualifications:

    - 2 Years with Bachelors in Science; 0 Years with Masters; 0 Years with PhD.

    - Demonstrated proficiency using digital test equipment

    - Demonstrated proficiency developing digital electronics
     
    Job Number: JK-1747
    Job Location: Manhattan Beach, CA
    Rate: 42-44/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 06/12/2019
    Last Updated: 06/12/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer Design 3 CA

    Description:
    Electrical Engineer Design 3 (Job Number: 19006196)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach

    United States-California-Redondo Beach
    Shift: 1st Shift

    Target Start Date: Apr 29, 2019
    Target End Date: Apr 24, 2020

    Pay Rate: $52 to $54/hr
    Location: Manhattan Beach, CA
    Work Schedule: 9/80
    Duration: 1 Year

    Security Clearance: N/A

    NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

    Job Description:

    The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
    Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

    Basic Qualifications:

    - 5 Years with Bachelors in Science; 3 Years with Masters; 1 Years with PhD.
    - Demonstrated proficiency using digital test equipment
    - Demonstrated proficiency developing digital electronics
     
    Job Number: MB-1737
    Job Location: Manhattan Beach, CA
    Rate: 54/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 03/18/2019
    Last Updated: 05/24/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electrical Engineer- Unit Member

    Description:
    PDS Tech, Inc. is seeking an Electrical Engineer- Unit Member in Wichita, KS

    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products.
    Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys).
    Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft.
    Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
    Write technical descriptions of subject matter pertinent to design or test requirements.
    Includes descriptions of supplier parts, test or rigging specifications, etc.
    Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
    Engineering degree required. Part 25 experience
     
    Job Number: 1910101918
    Job Location: Wichita, KS
    Duration: 9 months
    Input Date: 05/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gIhQAI&URLSource=cjhunter

    Electrical Engineering Test Tech

    Description:


    PRIMARY FUNCTION:
    The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
    This position follows a 4x10 compressed workweek schedule.
    JOB DUTIES:
     
    • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
    • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
    • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
    • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
    • Maintain documentation of testing and equipment operation.



     



     





     



    BASIC QUALIFICATIONS:
     
    • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
    • Knowledge of analog and digital symbol identification
    • Knowledge of test practices and procedures.
    • Personal computer skills required to configure and load software
    • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
    • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


    EDUCATION AND EXPERIENCE:
     
    • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
    • 2 years related experience and/or training; or equivalent combination of education and experience.


    QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
     
    • Valid State Driver’s License
    • Must be DoD Clearance Eligible


    PHYSICAL ACTIVITY:
    Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




     


     
    Job Number: 1910099812
    Job Location: Hunt Valley, MD
    Per Diem: Yes
    Duration: 6 months
    Input Date: 03/18/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Unit Member

    Description:
    Our client is looking for an Electrical Engineer Unit Member with great pay to work in Kansas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

    The ideal candidate for this position will perform the following tasks:
    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems.
    * Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems
    * Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys).
    * Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft.
    * Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents.
    * Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
    * Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

    Mandatory Qualifications and Experience:
    * Engineering degree required.
    * Part 25 experience.

    Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
     
    Job Number: 130500
    Job Location: Wichita, KS
    Duration: 9 months
    Start Date: 05/20/2019
    Input Date: 05/17/2019
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Gary Kidd
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    Electrical Engineers

    Description:
    Vehicle systems integration
     
    Job Location: OH/MI/IN
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: jmac@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Hardware Engineer

    Description:
    Major purpose:

    The Electrical Engineer will be involved with full life-cycle product development with a focus on digital and firmware design.



    Primary tasking will include:

    Focus on Firmware design, Product requirements, Box level integration, System integration, System test, Detail design process. Support tasking will include: Creation and maintenance of wiring diagrams and cable assemblies, Liaison support to onsite and remote manufacturing, Product installation, Schematic capture, Circuit board design, etc. Sets the highest ethical standards for self and others. Other engineering duties as assigned.



    Education/Experience/Licenses etc.:

    " With BS in Electrical Engineering or related field, must have at least seven (7) years of relevant experience.

    " Relevant experience includes: FPGA design experience, VHDL or Verilog proficiency, HDL simulation tools, Tcl scripting familiarity, Strong troubleshooting mentality, Team-oriented and task-focused, Software or firmware design principles, Operate spectrum analyzers and oscilloscope.

    " Preferred Experience includes: Xilinx Vivado experience, Analog and digital hardware design experience, Embedded software integration experience, Source code repository (Git, Subversion, etc.), Source code peer review processes, Bug tracking tool suites, Automated build environments, Strong electrical engineering fundamentals, AutoCAD

    " Must be able to obtain and maintain a Security Clearance which requires US Citizenship.

    " Must be able to work weekends and overtime as required.

    " The essential physical requirements of the position will be reviewed with the applicant during the interview.




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
     
    Job Number: 18-51714
    Job Location: Waco, TX
    Rate: 0.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2019-06-07 00:00:00.0
    Start Date: 2018-12-10 00:00:00.0
    Input Date: 12/11/2018
    Last Updated: 05/21/2019
    Firm Name: NESCO RESOURCE
    Attention: Sebastian Hernandez
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Manufacturing Engineer

    Description:
    The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model.

    The candidate will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: •Mentoring Manufacturing Engineering Associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
    •Developing the specific methods and instructions for manufacture and/or assembly of products.
    •Determining manufacturing feasibility to: •Identify potential fabrication problems,
    •Draw attention to special fabrication requirements and
    •Ensure the latest developments in manufacturing technology are considered in the design phase.

    •Establish design inherent cost targets which reflect hardware target cost.
    The Manufacturing Engineer: •works with the design team to ensure that the proposed design is within the allowable cost.
    •participates in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
    •establishes touch labor cost targets on shop/lab activities as requested.
    •defines tool and gauge requirements.
    •provides the necessary input and support to the tool design group.
    •ensures adequate tools and gauges are available when needed in the process.
    •works with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
    •provides support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
    •reviews and implements engineering changes to determine feasibility, producibility and delta cost impact.
    •determines, implements and leads process improvement opportunities, business unit initiatives and corrective actions.
    •leads efforts to understand non-conformances and reduce Cost of Poor Quality.
    •leads 3P events, Value Stream Mapping events, and the implementation of Process Certification.

    Education / Certifications •BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
    •5+ years of experience required.
    Experience/Qualifications •Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
    •Background courses in electrical design and/or manufacturing are desired.
    •Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
    •Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
    •Knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, etc.) required.
    •Basic knowledge of harnessing (wires/cables, crimping, etc.) and circuit boards (components, layout, etc.) preferred.
     
    Job Number: 1910099480
    Job Location: Windsor Locks, CT
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 05/21/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    Electrical Manufacturing Engineer

    Description:
    Electrical Manufacturing Engineer

    Windsor Locks, CT
    $36.50/hr
    12 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*
    **NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

    *Job Description
    The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

    Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

    The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

    Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

    *Education / Certifications
    BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
    5+ years of experience required.

    *Experience/Qualifications
    -Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
    -Background courses in electrical design and/or manufacturing are desired.
    -Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
    -Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
    -Basic knowledge of harnessing (wires/cables, crimping, etc.) and circuit boards (components, layout, etc.) preferred.
     
    Job Number: 10604
    Job Location: Windsor Locks, CT
    Rate: 36.50
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 03/12/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Role Summary/Purpose
    The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

    Essential Responsibilities
    In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

    In addition, as a Systems Engineer, you will:

    • Design Power Systems Architectures in co-operation with aircraft manufacturers
    • Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements
    • Derive system interfaces
    • Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements
    • Perform system analysis, safety analysis, modeling, and simulation
    • Develop the systems test environment
    • Development system test plans and procedures and get their approval with the customer
    • Work on developing and releasing test reports to customers
    • Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program
    • Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals
    • Maintain scope baseline
    • Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations
    • Document the results of analyses and studies in technical reports
    • Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
    • Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures
    • Support technical and program reviews

    Qualifications/Requirements

    • Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering
    • Experience in requirements development, verification and validation
    • Experience in system engineering and project management/planning
    • Knowledge of aircraft power distribution and generation
    • Clear thinking and diligent approach
    • Strong interpersonal and communication skills

    Desired Characteristics

    • Knowledge of electrical power systems technical requirements, certification requirements
    • Experience/ knowledge of the development lifecycle phases
    • Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs
    • Good written and verbal communication skills.
    • Proven ability to contribute in a team environment
    • Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard
    • System mindset and problem solver
     
    Job Number: 35475
    Job Location: Dayton, OH
    Input Date: 05/06/2019
    Firm Name: TAD PGS INC
    Attention: Kim Silcott
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 714/622-3967
    800 Phone: 800/261-3779
    Fax Phone: 714/897-8455
    Website: www.tadpgs.com

    Electrical UM (23&25)

    Description:
    PDS Tech, Inc. is seeking Electrical in Wichita, KS
    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

    EDUCATION:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    JOB QUALIFICATIONS:
    • Electrical DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
     
     
    Job Number: 1910098626
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 02/20/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

    Electrical harness/cable engineer

    Description:
    Seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.

    Other job responsibilities may include
    • Provides guidance in the development of cable/wire harness detail and assembly designs.
    • Provides guidance in the development of electrical product detail, assembly and installation designs.
    • Provides direction used by multiple teams to analyze complex results and performs design reviews.
    • Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
    • Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
    • Directs the technical review of supplier capabilities to facilitate source selection.
    • Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
    • Works under consultative mentorship

    Education/experience:
    BDegree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Active U.S. Security Clearance is A Plus
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Harness/Cable/Wire Design and Routing
     
    Job Number: Harness_OK
    Job Location: Oklahoma City,, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 04/01/2019
    Last Updated: 06/03/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electrical/Avionic Design Engineers

    Description:
    PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

    JOB RESPONSIBILITIES:

    • Job Responsibilities:
      • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
      • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
      • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
      • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
      • Maintain a high degree of proficiency in computer applications to accomplish tasks.
      • Coordinates with direct and indirect customers and suppliers to determine system requirements.
      • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
      • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
      • Provides guidance to lower grade engineers in the solution of complex design problems.
      • Reviews and evaluates supplier proposals for potential utilization on future models.
      • Performs above work utilizing frequent application of in-depth engineering principles.
      • Assures supervision awareness of program status, problems and successes.
      • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


     
     



     
    Education/Experience:
    • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
    • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    Qualifications:
    • Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
    • Ability to read and produce wiring drawings using standard industry practices
    • Experience with electronic test equipment
    • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
    • Skills in Microsoft Office suite software
    • C/C++ and assembly programming experience preferred
    • Visual Programming language preferred
    • Excellent written and verbal communication skills
    • Strong analytical and problem solving skills
     
    Job Number: 1910097705
    Job Location: Wichita, KS
    Duration: 6 months
    Input Date: 02/27/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical, Electronic and Electro-mechanical Components Engineer

    Description:
    Electrical, Electronic and Electro-mechanical (EEE) Components Engineer

    Location: Grand Prairie, TX (75051)

    9 month contract

    Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX. The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electro mechanical components used in military applications. The selected Candidate should be a self-starter, capable of handling several tasks at once. The selected candidate must be able to work without supervision. Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.

    Skill/Experience/Education
    Mandatory: Must be able to obtain a security clearance.
    Must be proficient with computer tools such as MS Excel and Access.
    Candidate should have experience in electrical component manufacturing process and physical property analysis.
    This position requires periodic travel to both the customer and supplier locations.

    Desired-
    The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
    Experience in Components Engineering with broad knowledge of electronic components and devices.
    The ideal candidate has experience working electrical components on a Production Program.
    Experience in the disposition of Q-Notes.
    Experience with parts release process, and with formal Configuration Board support.
    Experience working with Global Supply Chain, Quality and Manufacturing groups.







    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 56604
    Job Location: Grand Prairie, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 9+ months
    Start Date: 04/22/19
    Input Date: 04/11/2019
    Last Updated: 05/20/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Electro/Mechanical Design Engineer

    Description:
    -Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
    -Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
    -Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
    -Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
     
    Job Number: 0878
    Job Location: Multiple
    Rate: 50-80/hr
    Per Diem: YES
    Overtime: Possible
    Duration: 6-12 months plus
    Start Date: 2/3 wks
    Input Date: 05/29/2018
    Last Updated: 06/14/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    Electronic System Design & Analysis

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
     
    Job Number: ESDE_Hazelwood
    Job Location: Hazelwood, MO
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mon
    Start Date: ASAP
    Input Date: 05/28/2019
    Last Updated: 06/03/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electronic System Design & Analysis

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Education/experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: ESDE_OK
    Job Location: Oklahoma City, OK, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 04/01/2019
    Last Updated: 06/03/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electronic Systems Design & Analysis Engineer 3 - 373966

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 373966
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electronic Systems Design & Analysis Engineer 3 - 374077

    Description:
    **Requires the ability to obtain a Secret Clearance**

    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374077
    Job Location: Hazelwood, MO
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 04/30/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

    Description:
    Electronics Design and Analysis Engr 5- PCB Designer

    Location: El Segundo, CA
    Duration: 12+ Months

    Job Description:
    Mentor Expedition Printed Circuit Board (PCB) Designer
    The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
    Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
    Ensure that all requirements for manufacturing and assembly are met.
    Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
    Make schematic updates based upon changes from electrical engineers.

    Qualifications:
    • 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
    • Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
    Must be proficient with:
    • Verifying design using Design Rule Check.
    • Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
    • Utilizing Constraint Manager to define substrate and routing constraints.
    • Establishing rule areas that define specific route rules for different portions of the board.
    • Routing using both manual/interactive and automatic tools.
    • Working with different via structures.
    • Generating plane data.

    Skill Code: 624-Electronic Packaging Design
     
    Job Location: El Segundo, CA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 months
    Start Date: Asap
    Input Date: 01/02/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

    In your role, you will:
    • Assemble fabricated aircraft parts at floor stations.
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
    Qualifications:
    • Fine pitch soldering experience is required. (watch maker certifications)
    • 4 years experience in electronics assembly.
    • High School Diploma required.
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
     
     
    Job Number: 1810083538
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 03/29/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Michael Coonce
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


    In your role, you will:
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    Qualifications:
    • Fine pitch soldering experience is required is a plus 
    • 5 years experience in electronics assembly preferred.
    • Must have a High School Diploma or GED
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

     
     
    Job Number: 1610047076
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 10/22/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Technician TX

    Description:
    165027
    1592-1 Electronics Technician
    Work Location: Fort Worth, TX
    Status: Open

    Qty: 3
    Desired Start Date: 5/27/2019
    End Date: 4/17/2020

    Job Description:
    Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred.

    Level: Level 2: 3+ YRS
    Pay Rate: $33.16 Hourly

    Areas of Expertise Electrical Troubleshooting Yes 1 2 - 4 Years
    Areas of Expertise Wiring Harness Design No 1 2 - 4 Years
    Technical Skills Electrical Diagnosis/Repair Yes 1 2 - 4 Years
    Technical Skills Knowledge of Basic Mechanical/Electrical Concepts Yes 1 2 - 4 Years
    Technical Skills Read Electrical Schematics Yes 1 2 - 4 Years
    Technical Skills Wire Harness Print Reading No 1 2 - 4 Years
     
    Job Number: JE-1592-1
    Job Location: Fort Worth, TX
    Rate: 33/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 05/28/2019
    Last Updated: 06/05/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electrophysics Engineer Scientist 5

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist for an opportunity located in Oklahoma City, OK

    RESPONSIBILITIES:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Client and FAA EME requirements and to provide engineering and technical decisions for Client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    oReviewing supplier and partner qualification data
    oNuclear Hardening analysis and test
    oEMI/C analysis and test
    oEMSEC/TEMPEST analysis and test
    oHIRF/Lightning analysis and test
    oRF Co-Site analysis
    oAntenna Coupling analysis
    oElectrical Power Quality and Load analysis
    oTest Automation for aircraft modifications.

    Other job responsibilities may include
    oDevelops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    oDevelops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    oDevelops architectures to integrate multiple systems into higher level systems and platforms.
    oLeads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    oDevelops new and improved modeling and simulation techniques.
    oLeads development and execution of critical tests to validate performance of designs to requirements.
    oManages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    oProvides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    oSupports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    oCreates new tools to improve management of projects.
    oLeads development of major sections of large-scale proposals to support development of new business.
    oWorks under consultative mentorship.

    Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    EDUCATION:
    Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 177790
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/11/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate complex systems and components into higher level systems and platforms.
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Generates major sections of proposals to support development of new business.
    • Works under minimal mentorship.

    Prerequisites:
    • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099420
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/11/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: DJ Englert
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYeQAM&URLSource=cjhunter

    Electrophysics Engineer/Scientist - Secret

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
    • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance/TS is a plus.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099423
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWZXQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist 3

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:
    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.

     
    Job Number: 1910099417
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: TIME SQUARE 660 BUILDING
    660 SW 39TH ST STE 215

    City, State: RENTON, WA 98057
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYKQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist 4

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist 4 located in Oklahoma City, OK.

    RESPONSIBILITIES:
    The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with reviewing supplier and partner qualification data, Nuclear Hardening analysis and test, EMI/C analysis and test, EMSEC/TEMPEST analysis and test, HIRF/Lightning analysis and test, RF Co-Site analysis, Antenna Coupling analysis, Electrical Power Quality and Load analysis, Test Automation for aircraft modifications.

    Other job responsibilities may include
    Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    Develops architectures to integrate complex systems and components into higher level systems and platforms
    Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    Generates major sections of proposals to support development of new business
    Works under minimal mentorship

    REQUIRED EXPERIENCE:
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    EDUCATION:
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    WORK HOURS:
    Full-Time/First Shift
    7:30 am - 4:30 pm
     
    Job Number: 177789
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/11/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

    Description:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    • Develops architectures to integrate complex systems and components into higher level systems and platforms
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    • Generates major sections of proposals to support development of new business
    • Works under minimal mentorship

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373971
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrophysics Engineer/Scientist 5 - Electromagnetic Compatibility

    Description:
    **Secret Clearance Required to Start**

    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance/TS is a plus
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373972
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com