Job Search Results

314 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/04 Thursday 01:03PM Pacific Time by ContractJobHunter. )

Listings 1 - 314

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Design Engineers

Description:
Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Required
Gulfstream Experience Required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.

Job Number: 442
Job Location: GA
Rate: $75/Hr. **DOE**
Per Diem: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 01/12/2021
Last Updated: 01/31/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
59955 | Propulsion System Controls Engineer

Description:
Propulsion System Controls Engineer

Location: Fort Worth, TX (76118)

Job ID: #59955

12 month contract

The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

Hours:8:00am to 5:00pm

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 59955
Job Location: Fort Worth, TX
Duration: 12 month
Start Date: Jan/Feb 2021
Input Date: 01/06/2021
Last Updated: 02/09/2021

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Mechanical Engineer

Description:
An Advanced Mechanical Engineer job in Pittsfield, MA is currently available through Belcan. In this role, you will be responsible for designing and developing in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, or a related specialize area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Mechanical Engineer Job duties:

* Gather all wire and cable construction, routing, and COORD requirements at a programmatic level.
* Define processes for design tools and design best practices to implement cabling designs.
* Define material and deliverables for the entire cable plant on a program.
* Prepare design review material to be presented both internally and externally (to the customer).
* Interface directly with other subcontractors on the program to support proving inputs and review comments to shared interfaces and data.

Qualifications:

* Fully capable with solid modeling CAD tools to create mechanical models and drawings.
* Fully proficient with cabling tools (Mentor /Capital Harness experience preferred) to create cable harness and stand-alone cable drawings.
* Fully proficient with technical standards, manufacturing/fabrication methods, and government/industry standards.
* Provide support to the Manufacturing organization during the build cycle.

If you are interested in this Advanced Mechanical Engineer position in Pittsfield, MA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

Job Number: 307762
Job Location: Pittsfield, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/31/2020
Last Updated: 01/22/2021

Firm Name: BELCAN TECHSERVICES
Attention: ScoutWonsang
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Aerodynamics Engineer

Description:
PDS Tech Inc is seeking Acoustics Test Engineer in Ann Arbor, MI

Benchmarking using CATIA data, drawings, vehicles and test results
Vehicle evaluation planning, testing and reporting
Study results, propose and develop countermeasures to improve wind noise or aerodynamics
Other duties as assigned

Required Technical Skills:

3+ years’ hands-on experience with vehicle mock-up for wind noise and/or aerodynamic evaluation

3+ years’ experience using acoustic measurement equipment
1+ years’ experience using pressure data acquisition & analysis software
Ability to read and understand component part and assembly drawings
Capability to utilize CATIA for part and system analysis

General Requirements:

BS or MS in mechanical or aerodynamics/aerospace engineering

Knowledge and understanding of aeroacoustic phenomena
On-road and in wind tunnel wind noise testing experience
Ability to communicate technical data with clear conclusion in a visual format

Job Number: 2010121669
Job Location: Ann Arbor, MI
Duration: 24 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PEh5QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX - JR-019786

Description:
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX
JR-019786

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

You Will:

• Report to onsite Engineering Manager
• Act as Engineering technician / mechanical engineering mechanic with experience in test machinery, drive systems and gear boxes.
• Accountable for construction, assembly, installation, checkout and operation of various test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.
•
• Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Responsible for building and testing of aircraft components, fixtures and tooling required to conduct tests.
•
• Interact with test engineers, laboratory technicians and test support groups.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Interact with personnel in other laboratories.
• Interact with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and various other departments.
•
You Will Need:

• Read and understand mechanical drawings, reports, specifications and engineering instructions in order to make, assemble, build, operate and repair test machines, (aircraft gear boxes, drive systems etc Preferred)
•
• Able to lift 50 pounds.
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).
•
Education: Associate Degree in Engineering (Mechanical) (Preferred)
High School Diploma with Five years’ experience
Years of Experience: 5 yrs Required.

Industry: Aerospace (Aircraft A&P license) Equivalent military certification / Mechanical , USAF,

Citizenship: US Citizen
Skills & Experience
Aircraft Maintenance, Drive Systems, Mechanical Maintenance, Mechanical Repairs, Mechanical Testing
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Engineering-Technician_JR-019000

Job Number: JR-019786
Job Location: Fort Worth, TX
Input Date: 01/15/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX

Description:
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX
JR-020008

Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

Aerospace Rotorcraft Flight Controls Engineer

You Will:
Flight Controls engineer is a multi-skilled technical person capable of providing expertise in conceptual design, development, integration, and verification and test algorithms for the Advanced Helicopter. This position will employ the skills above to assist in progressing overall Flight Controls system conceptual design readiness for a proposal response of the Advanced Helicopter program of record. The position requires coordination across system and program boundaries as the Flight Controls IPT representative to ensure alignment of air vehicle systems. This position will also develop Flight Control Systems content for the Advanced Helicopter program of record proposal related to all aspects of Flight Control Systems development, specifically hardware, software, control strategy, and verification, as well as, manage and provide status updates on the development, schedule, and risk associated with Flight Control System content readiness.

You’ll Need:

• At least 8 years of relevant Flight Control Systems experience with a focus in any of the following: hardware, software, systems integration, or control laws.
• Previous proposal experience is preferred
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems, and multiple data protocols
• Experience with Enovia, DOORS, and Serena Dimensions
• Development of system requirements, architectures, and schematics.
• Experience with current industry software languages and practices
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)

Education: Bachelor’s Degree is required. Major in Aerospace, Mechanical, Electrical, or Software Engineering or Computer Science is preferred. Related degrees with relevant experience will be considered.

Years of Experience: At least 10 years of relevant experience in aerospace industry is required. Experience in Helicopter flight controls is preferred.
Citizenship: US person

Skills & Experience
Electronic Engineering, Embedded Systems Engineering, Systems Engineering, System Software Development
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
Apply

Application Web URL Address:

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/FCS-Software-Engineer_JR-020008

Job Number: JR-020008
Job Location: Fort Worth, TX
Input Date: 01/11/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Aircraft Structures Mechanic II

Description:
Chipton-Ross is seeking 100 Aircraft Mechanic II's for openings in San Antonio, TX.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

ADDITIONAL RESPONSIBILITIES:
� Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
� Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
� Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
� Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
� Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
� Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
� A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
� The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
� Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
� Maintain necessary certifications, licenses and permits as required for assigned work.
� The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
� Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

EDUCATION:
High school diploma or accredited GED and typically 4 or more years related experience or an equivalent combination of education and experience.

FULL TIME/VARIABLE SHIFT
WORK HOURS: Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 188635
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 Months
Input Date: 12/22/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Analysis Group Lead

Description:
An Airframe Group Lead job is currently available at Belcan. This position is located in Lexington, KY. This opportunity is a direct position. To be considered for this role, you will need a bachelor's degree with a minimum of at least 5 years of experience. In this role you will be performing managerial and technical leadership to a diverse team of over 10 engineers, and recruiting work for team.

Principal Responsibilities:
* Responsible for providing managerial and technical leadership to a diverse team of over 10 engineers, and recruiting work for team
* Define project scope, objectives, staffing and deliverables
* Develop and maintain customer relationships
* Review and perform static and fatigue analysis on airframe structure using hand calculations and FEA

Requirements for the role include:
* Bachelor of Science degree in Mechanical Engineering or Aerospace Engineering
* Minimum of five (5) years of experience performing airframe analysis and possess strong organizational skills, effective communication skills, and leadership skills
* MSC Nastran / Patran, ANSYS, and/or FEMAP capabilities
* Prior mentoring experience is required
* Airframe expertise and familiarity with FAA/Military Specifications
* Static and Fatigue analysis experience is required
* Must have good interpersonal skills and willing to work with others effectively as well as to work to deadlines as needed
* Must have excellent customer service skills
* Extensive Microsoft Office Suite experience is a MUST
* Due to the nature of the work being done all applicants must be U. S. Citizens

Desired skills include:
* Familiarity with composite layup manufacturing processes and analysis
* VBA or similar programming skill set
* Aircraft repair competency

If you are interested in this Airframe Group Lead job please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

Job Number: 307167
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/09/2020
Last Updated: 01/19/2021

Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer

Description:
Description of Duties - Design and integration of aircraft structure, interior, mechanical systems, and avionics/electrical utilizing CATIA V5/V6 and Enovia. Requires coordination with multiple technical stakeholders. In this position, the candidate will work closely with IPT members (such as Program Management, Technical Engineering, Manufacturing, Planning, Supply Chain, & Quality Assurance) to achieve the desired Air Vehicle requirements and objectives. Activities will include involvement in Military applications. Completes either new design or modifies existing design (layouts, detail parts, assemblies, installation drawings) ensuring compliance with requirements.

Input Date: 01/13/2021

Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer

Description:
An Applications Engineer job in Tempe, AZ is currently available through Belcan. The Applications Engineer will assist the Sales team with technical expertise throughout the sales process. They define equipment configurations and specifications together with customers and internal resources based on process requirements. They provide strategic guidance to the product development teams within the organization on future product development.

Job Duties:
* Presents technology to prospective customers during visits, phone conversations and online meetings.
* Seeks to understand customer requirements (process capability, performance, cost of ownership, etc.) as thoroughly as possible.
* Develops equipment configurations with the customer and the sales management team.
* Validates technical equipment performance specifications (acceptance criteria) with customers.
* Conducts equipment and process demonstrations with process engineer.
* Provides technical application support to customers (remotely and onsite), sales and service staff.
* Attends trade shows and technical conferences.
* Creates technical reports and authors technical papers.
* Analyzes the scope of work for process demonstrations and contract services.
* Researches, collects and reports information on the ability and capacity of company products and competing equipment.
* Aids in the design and development of equipment and systems, and redesign of existing systems to fulfill the needs of customers.
* Responsibilities also include providing equipment functionality and capability reports to the Sales team and acting as technical liaison to the Sales team.
* Develop understanding of product line.
* Must be able to travel domestically and internationally overnight, as needed, up to 70% of the time. Must possess a valid passport.
* This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver's license and have acceptable driving privileges.

Qualifications:
* BS or BA in Mechanical Engineering or related engineering discipline and 7-7 years in a related field
* Preferable to have experience with relevant technology.
* Must be able to effectively present information to all levels within a customer organization.
* Proficiency with JMP is required.
* Experienced in the area of capital equipment for the semiconductor industry.
* Preferable to have experience in semiconductor processing for MEMS, IC, LED or Semiconductor applications.
* Project Management skills for small projects.
* Preferred to have Kepner-Tregoe Problem Solving Decision Management training.

If you are interested in the Applications Engineer job in Tempe, AZ, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

Job Number: 306829
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/25/2021

Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2021-12304

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Make continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
What You’ll Need:

IPC-A-610 - Technical Skills Required
IPC-J-STD - Technical Skills Required
Soldering Experience required

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12304
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/13/2021

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2021-12275

Contract Opportunity

Location: Clearwater, FL

Industry: Aerospace & Defense

Minimum Experience: 1 Year

What You’ll Do:

Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
Must be able to read instructions and identify standard SMT components.
Must be able to work in a fast-paced environment where some overtime may be required.
Must be able to sit for long periods of time and focus on tedious tasks.
Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned
What You’ll Need:

Mandatory:
Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
Ability to work under a microscope for long periods of time to perform inspection / solder repair.
Must be able to read and interpret assembly drawings.
Strong communication and organizational skills and ability to work in a team oriented environment.
Heavy Lifting
Desired:
Experience working in a LEAN Manufacturing environment
Strong leadership, mentoring and training aptitude
IPC-610 Certification
IPC J-STD-001 Certification
Technical Skills:
IPC-A-610
IPC-J-STD
Surface Mount Technology

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

1 + year of experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12275
Job Location: Clearwater, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/06/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2021-12272

Contract Opportunity

Location: Clearwater, FL

Industry: Aerospace & Defense

Minimum Experience: 1 Year

What You’ll Do:

Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned
What You’ll Need:

Must be able to read instructions and identify standard SMT components.
Must be able to work in a fast-paced environment where some overtime may be required.
Must be able to sit for long periods of time and focus on tedious tasks.
Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
Mandatory:
Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
Ability to work under a microscope for long periods of time to perform inspection / solder repair.
Must be able to read and interpret assembly drawings.
Strong communication and organizational skills and ability to work in a team oriented environment.
Desired:
Experience working in a LEAN Manufacturing environment
Strong leadership, mentoring and training aptitude
IPC-610 Certification
IPC J-STD-001 Certification
Technical Skills:
Ability to read engineering drawings
IPC-A-610
IPC-J-STD
Soldering
Surface mount technology

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

1 Year of experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12272
Job Location: Clearwater, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/05/2021

Assembler A

Description:
PDS Tech, Inc. is seeking an Assembler in Sylmar, CA.

Summary:

Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

Education/experience typically acquired through basic education (e.g. high school diploma/GED).

Job Number: 2010120134
Job Location: Sylmar, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PAPlQAO&URLSource=cjhunter

Assembler B

Description:
Chipton-Ross is seeking an Assembler B located in El Segundo, CA.

RESPONSIBILITIES:
Assemblers performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Assembles, inspects, modifies and reworks developmental electronic subsystems, subunits, assemblies, components and harnesses and cables, used for experimental and preproduction purposes. Under engineering direction sets up and operates all types of equipment to fabricate and assemble complete flight, developmental and prototype microelectronic circuit assemblies. May set up and operate small bench microweld machines in laboratory areas. Typical Duties and Responsibilities:
� Works from blueprints, schematics, samples lacking complete details or specific information, assembly drawings, sketches, oral and written instructions requiring the identification of all circuit symbols, wiring codes and electrical components.
� Determines work sequence, positions, assembles and modifies developmental electronic devices such as radar synchronizers, computers and roll servo units in accordance with schematics, wiring diagrams or other specifications, using pre-drilled chassis and printed wiring boards. Routes and connects wires and cables in the proper manner so that parts, wires or cables are reasonably accessible for removal and replacement and are mechanically connected, soldered or welded according to prescribed standards. Fabricates and routes wire harnesses and cables on panels, modules and chassis. Uses appropriate technology to assure components assembled will not shift position. Fabricates thin or thick film substrates using all appropriate processes. Fabricates and assemble microminiature circuit parts using special resins, thermo compression die bonding, ultrasonic and parallel gap microwelding and microsoldering techniques.
� Identifies and selects, as called out on schematic wiring diagrams, various electrical components of proper value or size by color code, coded label or other related identification characteristics. Identifies terminal connections for components as required.
� Installs parts and components for proper rotation and polarity. Checks for proper continuity, workmanship and make capacitance and resistance measurements.
� Assists in the development of revised or new methods, techniques and procedures. Makes oral and written reports as required.
� Works efficiently and completes all task with little or no supervision, performs soldering on all type of standard and fine pitch components. Perform soldering on complex wire connectors with little or no supervision, Applies bonding staking and coating. Assists engineering in improving methods, processes and procedures.
� Ascertains that all welds are satisfactory or removes components and rewelds.
� Cleans equipment as required.
� Meets necessary certifications as required.
� Performs rework of the same nature and level of difficulty as described.
� Performs incidental related duties as assigned or required.

ADDITIONAL EXPERIENCE:
Preferred candidates will have circuit card solder assembly experience, leaded flat pack fine pitch and surface mount. IPC J-STD-001 Training and Certification preferred, but not required.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).school/Associate).

FULL TIME/FIRST SHIFT
WORK HOURS: 5:00 AM - 2:30 PM

ADDITIONAL REQUIREMENTS: VISION TEST REQUIRED AS PART OF CONTINGENCIES.

Job Number: 188246
Job Location: El Segundo, CA
Rate: $DOE
Duration: 6 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: khardage@chiptonross.com
Website: www.chiptonross.com

Assembler C

Description:
Chipton-Ross is seeking a Assembler C for an opening in Sylmar, CA.

RESPONSIBILITIES:
Performs complex production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools.
� Assembly, packaging and test of optoelectronic products
� Hands-on experience in fiber optic & microelectronic device packaging, including working with packaging materials, mechanical components, optical components attachment methods and materials, as well as other optoelectronic and microelectronic package assembly processes.
� Experience aligning and assembling packaged optical components for use in optical fiber communications or other semiconductor devices.
� Familiarity and comfort of working with optical fibers
� Hands-on experience in alignment and assembly of fiber optical components as well as optical coupling alignment of optical fibers
� Must be able to operate, setup and prepare wire bonders, wedge bonders and wire pullers (manual and automatic bonders)
� Ability to work with very small components, including handling with tweezers and possess fine manual dexterity
� Ability to conduct inspection of devices and operate under a microscope.
� Knowledge of precision soldering including SMT repair of PCB boards.
� Ability to use various, die attach, optical and other adhesives and epoxies
� Knowledge of basic test equipment: DVM, micrometers, calipers, comparators
� Able to work based on travelers, schematics, drawings and engineering directions, perform tasks carefully, document work thoroughly and observe and detect any significant departures from normal process behavior.
� Good verbal and written communication skills. Must be able to understand work instructions and modify as needed and maintain good and effective communication with management, engineering, and technician peers to continuously improve products and processes
� Good computer skills including use of Microsoft Office and ability to learn and operate specialty software
� Familiarity with ESD practices and LASER safety protocols
� Conduct precision assembly and test of optoelectronic components
� Operate, setup and perform basic troubleshooting of wire and wedge bonders, and wire pulling equipment
� Handle devices that include optical fibers
� Operate custom test equipment, that involves illumination by lasers and work in laser goggles when required
� Prepare reports as needed
� Functions are subject to change to meets the needs of the Company.
� Supports the implementation of engineering and production changes throughout product life cycle.
� Proactively identifies issues and offers solutions to the team.

REQUIRED EXPERIENCE:
Minimum of 5 (five) years of optoelectronic precision assembly experience that includes skills described in the Skills/Knowledge/Abilities section
Position Comments: **** MUST HAVE
Assembly, packaging and test of optoelectronic products
� Hands-on experience in fiber optic & microelectronic device packaging, including working with packaging materials, mechanical components, optical components attachment methods and materials, as well as other optoelectronic and microelectronic package assembly processes.
� Experience aligning and assembling packaged optical components for use in optical fiber communications or other semiconductor devices.
� Familiarity and comfort of working with optical fibers
� Hands-on experience in alignment and assembly of fiber optical components as well as optical coupling alignment of optical fibers
� Ability to work with very small components, including handling with tweezers and possess fine manual dexterity
� Ability to conduct inspection of devices and operate under a microscope.
� Knowledge of precision soldering including SMT repair of PCB boards.
� Ability to use various, die attach, optical and other adhesives and epoxies

WORK ENVIRONMENT:
� Sitting at Inspection Microscope for long periods.
� Daily use of computer and other equipment as required.
� Demonstrated manual dexterity in handling tiny parts with tweezers
� Must be able to attain soldering certifications

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

**AS degree in a STEM discipline is preferred. Requires a High School Diploma and/or equivalent.
Experience**

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

Job Number: 188077
Job Location: Sylmar, CA
Rate: $DOE
Duration: 9 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler – Level 2

Description:
Assembler – Level 2

Job ID # 2020-12260

Contract Opportunity

Location: Huntsville, AL

Industry: Defense

Minimum Education: High School Diploma / GED

Minimum Experience: 5 years

What You’ll Need:

IPC-620/610 & J-STD certificate current or expired (Needed)
Able to read and comprehend and follow detailed work instructions
Able to troubleshoot and repair work performed
Work well with others or independently.
Able to use a PC for timecard, documentation retrieval and signoff of assembly steps
Familiar with wire gauges, electrical and mechanical parts and can identify
Performing delicate work
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High school diploma / GED combined with 5+ years of hands-on experience in electronic assembly or repair with hand tools, crimp/extraction tools and soldering tools
What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2020-12260
Job Location: Huntsville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 01/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AutoCAD Specialist

Description:
Develops Computer-Aided Design (CAD) drawings.
Works closely with design originators, preparing drawings or computer models of unusual, complex, or original designs that require a high degree of precision
Assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawings produced.
Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent.
Although working primarily as a drafter, may occasionally interpret general designs prepared by others to complete minor details

Extensive experience with AutoCAD, including Autodesk® Inventor 3D CAD Software.
Understanding of configuration management of 3D and 2D data.
Able to accurately obtain mechanical measurements using calipers, micrometers, height, pin, thread, and radius gauges.

Security Clearance Required

Job Number: 49302
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/04/2021

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer

Description:
The primary responsibilities will include design, manufacture, integration, and testing of custom circuit boards and embedded system components.

MUST HAVE:
• 5+ years experience including analog and digital PCB design for aerospace industry
• Experience assembling, testing, and troubleshooting prototype circuit designs and PCB assemblies
• Working knowledge of sensors and flight test instrumentation, analog and digital signals
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience developing and refining system level requirements from formal and informal sources
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
• Ability to read and create wiring diagrams and troubleshoot wiring on test bench or on vehicle
• Excellent communication skills — able to partner internally and research and interact with potential suppliers

NICE TO HAVE:
• Experience with manned experimental aircraft flight testing
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience developing software on microcontrollers
• Exposure to a variety of aircraft hardware development standards

DEGREES AND CERTIFICATION:
• An undergraduate degree in Aerospace, Electrical, or Mechanical Engineering, or Computer Science is required
• A master’s degree in Aerospace, or Electrical Engineering is preferred
• Pilot's license and/or Aircraft Mechanic (A&P) license is a strong plus

Job Number: 45-004
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possbile
Duration: 1+years
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

CDS Machine Operator

Description:
Chipton-Ross is seeking a CDS Machine Operator for an opening in Littleton, CO.

RESPONSIBILITIES:
Sets up and operates a variety of machine tools such as routers, lathes, milling machines, shapers, planers and precision grinders to make metal and composite parts, mechanisms tools or machines to exacting tolerances and dimensions. Interprets blueprints sketches and engineering specifications; determines sequence of operations number of cuts required and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work tooling feeds and speeds; measures marks and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material parts and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
0-3 years of work experience
Experience creating efficient CNC programs from engineering drawings and/or 3D models using MasterCAM. Shop level knowledge of Geometric Dimensioning and Tolerancing (GD&T). Align appropriate cutting tools for programmed operations. Knowledge of proper speeds and feeds for cutting tools and materials being cut. Proficient in CNC equipment setup using best shop practices. Capable of manually operating machine shop equipment. Able to work independently with little supervision. Knowledge of machine shop inspection tools. Skilled in operating manual mills and lathes. Knowledge of CNC Router. Experience with composite materials. Programming from 3D models. Ability to program 3D toolpaths.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Mon - Thurs, 3pm - 0130 am
Full-Time

Job Number: 187388
Job Location: Littleton, CO
Rate: $DOE
Duration: 3 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

CNC Machinist

Description:
CNC Machinist
Primary Objective:
Supports production operations by performing moderate to difficult machining operations. A CNC Machinist II operates various types of machine tools and performs progressive machining operations for metal parts, tools and machines with close tolerance and focus on high quality and accurate parts. May suggest edits to the NC programmer in the course of making parts.

Key Job Duties:
Reads and interprets specific machining instructions from complex blueprints, part and machine drawings.
Must be able to set up all tooling, write and execute complex programs.
Sets up, operates and programs a broad range of production work involving close tolerance and set ups that are exacting that are somewhat involved and have moderate to high degree of difficulty.
Performs other secondary operations such as stamping part numbers and deburring during machine cycle times.
Inspects machine parts to ensure they meet proper size, shape, or tolerance specs using micrometers and other measuring tools and devices.
Performs routine maintenance.
Performs quality audits of completed work within the machine shop department.
Must be able to write programs without assistance.
Participates in and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
Position may transition to second shift

Requirements
High School Diploma or GED required
Technical Degree in Machine Tool Technology or related field preferred
Must be good at problem solving, have good mechanical aptitude, and able to learn and understand job methods and instructions in a timely manner
2+ years of relevant machining experience desired
Excellent work history desired
Must be able to stand for long periods of time and regularly lift 50+ pounds on a regular basis

Job Number: 2010117810
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P3UrQAK&URLSource=cjhunter

CNC Operator

Job Number: 2010118545
Job Location: Oneida, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

CREO Mechanical Engineers and Designers (CREO 4)

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers with heavy vehicle design experience. Also need CREO Cable Harness Design Engineers with BS Degrees.Develop mechanical assemblies, test equipment racks, and electrical harnesses
***MUST have CREO 4 experience***Creo (Pro/Engineer)/ Windchill

Job Number: PL CREO
Job Location: WA,CA, PA, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 02/11/2021
Last Updated: 03/04/2021

Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Principal Duties and Responsibilities:

Essential Functions:
1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods.
3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP).
5. Uses the material tracking system to create parts demand, track squawks and to sign-off work.

Additional Functions:
1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
2. Performs other duties as required.

Education and Experience Requirements:

High school diploma/GED.
Two (2) years experience in wood finishing.
Experience in aerospace industry preferred.
Basic knowledge of cabinet finishing processes and products.

Unique Skills:

Aircraft Cabinet finishing

Other Requirements:
1. Possess a working knowledge of inspection and process specifications.
2. The ability to read, write, speak, and understand the English language.
3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
4. Must be computer literate.

Job Number: 2010122422
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/07/2021
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PHhJQAW&URLSource=cjhunter

Cabinet Finisher II

Unique Skills:

Knowledge of Solumina preferred but not required.

Job Number: 2010122863
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PKLyQAO&URLSource=cjhunter

Component Qualification Test Engineer

Description:
PDS Tech is seeking a Component Qualification Test Engineer that is familiar with the Sikorsky Test / Supplier Quality process in Stratford CT

The ideal candidate will:

Support and manage Hydro-Mechanical and Electro-Mechanical Supplier Component laboratory tests to validate component designs
Write technical documents for development and qualification requirements, procedures and results
Review supplier qualification plans, procedures, and reports and drawings.

Primary reason for this sub-contractor is to support supplier qualifications on FVL programs.

Must have:

Understanding of Supplier Component Qualification process
Expose and experience with the Sikorsky Supplier Qualification process and norms.
BS degree or higher in Mechanical Engineering
20+ years of experience.
Ability to travel, including out of the country.
Knowledge of system engineering.

Job Number: 2010118879
Job Location: Stratford, CT
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6jlQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Crash Analysis Engineer

Description:
804 Technology is currently looking for a Crash Analysis Engineer for a long term contract job opportunity located in Fort Worth TX. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Salary is based on experience and Per Diem is available to those that qualify.
Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description:
A Crash Analysis Engineer opportunity is available to develop Full Scale Crashworthiness Model for the FARA program. Applicants will have the opportunity to influence full system level design based upon their analytical guidance.
The Crash Analysis Engineer is responsible for creation and modification of a detailed non-linear impact & crash dynamics finite element model for FARA aircraft and perform evaluative simulations to guide design.

Position Responsibilities:
• Import complex 3-D solid models from CATIA V4/5/6 platform.
• Perform necessary geometry clean-up and create adequate finite element mesh using Altair Hypermesh and/or other software, for non-linear high-speed impact simulations.
• Perform nonlinear material characterization (impacting object and impacted surface) to capture pre- & post damage behavior using LS DYNA software.
• Develop full aircraft level non-linear crashworthiness model for various landing and crash impact simulations using LS DYNA software.
• Perform trade studies to optimize the design and communicate with other teams.
• Develop presentations/reports of the analytical results and present to management.
• Assist in aircraft level guidance to influence effective low cost/weight design.
• Assist in the development of certification test plan and requirements.
• Work with the other teams to develop Integrated Vehicle solutions for crash safety.

Education Requirements:
• Bachelor of Science or Engineering Degree is required with major preferably in Mechanical Engineering or Aerospace Engineering.
• Masters or Doctorate degree in Aerospace or Mechanical Engineering is preferred.

Position Requirements:
• Different levels of experience will be considered with at least 10+ years of experience in crashworthy design and analysis is preferred.
• Experience with full aircraft/vehicle level system model development, testing and model validation is preferred.
• 8+ years of experience with CATIA (V 4/5/6), Hypermesh and LS DYNA software is preferred.
• Experience with related software tools such as MSC NASTRAN, MSC PATRAN, MSC ADAMS and ANSYS is preferred.
• Experience in system level structure-to-structure interaction as well as fluid-structure interaction is preferred.
• Analysis skills to accomplish complete aircraft level crash analysis
• Experience with non-linear material calibration and correlation to tests.
• Familiarity with military and industry standards for component level qualification, system level requirements and design, is preferred.
• Experience with the creation of system safety assessments is preferred
• Experience with rotorcraft crashworthiness is preferred
• Ability to communicate efficiently and effectively to coordinate, prioritize tasks, and report status
• Ability to build and maintain effective relationships with customers, as well as horizontal integrations across the other teams
• Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook
• Ability to work effectively within a team utilizing good interpersonal and organization skills
• Ability to obtain Secret Security Clearance preferred

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Crash/Analyst 804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Data Analytics & Development-SQL Server

Description:

PDS Tech, Inc. is seeking a Data Analytics & Development-SQL Server, in Fort worth, TX.

Summary:

Primary role is member of the F-35 Prognostics & Health Management (PHM) Advanced Analytics Team
Primary responsibility is to advance the F-35 PHM Advanced Analytics capability through a Data Science approach. Support the analytics infrastructure; F-35 Fleet Analytics Search Tool (F-35 FAST), to enable data analysis, data mining, and responsible for maintaining, analyzing, capturing, storing and creating visualizations of large and complex datasets. The engineer will clearly document and define PHM data available for analysis and maintain standards and best practices to ensure the architecture can efficiently support required data growth. Ensure appropriate mechanisms, processes and controls are in place to produce and maintain high quality data relevant to objectives. Ability to utilize knowledge of advanced data science methods, technologies and algorithms to develop, implement and deliver products, services and related systems
Primary tasks include analysis of vast quantities of machine data collected from aircraft. The engineer will develop and support efficient methods of sustaining use cases, methods, visualizations, and processes to grow data available for analysis. The engineer will support analysis processes to mature Air Vehicle PHM isolation and troubleshooting of sub-system fault codes and identify nuisance or correlated diagnostic fault codes to mature system performance.

Basic Qualifications:

Bachelor's degree in Computer Science, Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
Experience developing with one of the following languages or tools: SQL, Python, or Tableau

Desired Skills:

Background in Computer Science preferred
Experience manipulating and analyzing complex, high-volume, high-dimensionality data from varying sources
Database systems (SQL/NO SQL)
Experience with the following: Scripting, Java, C/C++, Matlab, Hive, Pig, Python, SPSS, R, XML, Impala, Flume
Demonstrated experience with modern enterprise data architectures (i.e. distributed data architecture)
Expertise in Descriptive Statistics and exploratory data analysis
Experience in Predictive Analytics
Demonstrated experience data quality or validation tasks
F-35 Program Experience
Experience with working in a dynamic, diverse team environment
Team player with excellent organizational skills
Self-starter with strong verbal and written communication skills

Job Number: 2010120451
Job Location: Fort Worth, TX
Duration: 14 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PBEfQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/13/2021

Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECU Circuit and Systems Engineer

Description:
This position is responsible for Engine Control Unit (ECU) Circuit and Systems design for a new aircraft turbine propulsion system. The successful candidate will have systems engineering and electrical circuit design experience and understand how to flow system requirements to the hardware and software engineering teams.

REQUIRED SKILLS:

* Bachelor’s degree in Electrical Engineering
* 5+ years Aerospace circuit design experience
* Electro-mechanical systems requirements development experience
* Systems requirements flow down & management experience
* Understanding of electro-mechanical design process
* Proficient in interpreting and analyzing electro-mechanical engineering drawings
* Understanding of DO-160 and its application in the qualification of complex systems hardware
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Engine ECU and LRU familiarity
* Electro-mechanical circuit testing experience
* Electro-mechanical system integration experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 01/05/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECU Systems Engineer

Description:
This position is responsible for Engine Control Unit (ECU) Systems design for a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to flow system requirements to the hardware and software engineering teams.

REQUIRED SKILLS:

* Bachelor’s degree in Electrical/Mechanical/Aerospace Engineering
* 5+ years Aerospace systems engineering experience
* Electro-mechanical systems requirements development experience
* Systems requirements flow down & management experience
* Understanding of electro-mechanical design process
* Proficient in interpreting and analyzing electro-mechanical engineering drawings
* Understanding of DO-160 and its application in the qualification of complex systems hardware
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Engine ECU and LRU familiarity
* Electro-mechanical circuit testing experience
* Electro-mechanical system integration experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 01/05/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Job ID # 2021-12286

Contract Opportunity

Location: Vandenberg AFB, CA

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 2 years

What You’ll Do:

Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
Disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
Develop and coordinate technical portions of proposals, statements of work and contract specifications.
Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance.
Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
Must understand and comply with (EWR 127-1) Range Safety design and operational requirements in performance of duties
Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing
What You’ll Need:

Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high pressure gases.
Some travel to other client facilities may be required
May need to work on other shifts when needed.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s degree is required combined with 2+ years of relevant work experience; or Master’s degree in electrical engineering.
Electrical Engineering degree is preferred, will consider Mechanical or Aerospace Engineering Degree.
What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12286
Job Location: Vanderburg AFB, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/11/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Electromechanical Lead) Rochester, NY

Description:
Electrical Engineer, JR-019454
(Electromechanical Lead), NY

Role and Responsibilities:

• Obsolescence management for electronics and mechanical components
• Lead the design of complex electronic mechanical system including defining the architecture, schematics development through to manufacturing establishment.
• Systems approach to problem definition, scoping and solving
• Implementing hardware changes, proactive handling of EOL components.
• Root-causing of failures for market returns, participating in problem solving process.
• Hardware testing and troubleshooting, including board bring-up, design of test tooling and adaptation of existing platforms to new specifications.
Experience:
• Experience in design, development, prototyping, testing and transfer to production of complex Electronics/Mechanical systems
• Manage obsolescence for off-the-shelf (OTS) components to include: motors, pumps, actuators, solenoids, hard drives, sensors, heaters, monitors and printers
• Experience in systems integration including hardware and software
• Experience using mechanical design software.
• Experience in Circuit design and ECAD tools Eg. Altium Designer
• Demonstrated ability to deliver products in a regulated environment and the phase gate process
• In Vitro Diagnostics (IVD) industry device development highly preferred
• Familiarity with international standards e.g. ISO 9001, ISO 13485, IEC 61010, IEC 60601, and FDA QSR regulations

Required Skills:
Pro-active update the design of electronic sub-assemblies to resolve obsolescence
Identify relevant requirements from medical device standards and In depth knowledge of regulatory procedures that affect methods and techniques to solve issues when creating designs.
Strong knowledge of fundamentals regarding electronic components and circuits
Systems integration including Electronics and Mechanical hardware
Proficiency with electrical test equipment; oscilloscopes, logic analyzers, etc.
Excellent understanding of mechanical, thermal, electrical, and optical designs and components, and their interactions as a system to meet system performance requirements
Proficiency in analog and digital circuit design including signal processing, a/d, d/a, power circuits
Experience with mechanical design software.
Familiarity with international standards e.g. ISO 9001, ISO 13485, IEC 61010, IEC 60601-1 and IEC 60601-1-2 and FDA QSR regulations
Adherence to OH&S requirements: Safe use of potentially hazardous equipment, liquids etc.

Job Number: JR-019454
Job Location: Rochester, NY
Input Date: 01/27/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Electrical Test Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Test Engineer in Vergennes, VT

Description:
Engineering Lab Technician

Development, coordination and conducting of technical reliability studies and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans. .
Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
Compilation and analysis of performance reports.

Prerequisites:
Education:

AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience.

Additional Job Details:

Provides technical support to engineers on a variety of tasks.
Plans and executes experiments and gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes to support engineering disciplines.
Analyzes, maintains, compiles and formats data and design changes.
Produces drawings, reports and engineering documentation.
Performs research and engineering laboratory functions involving the layout, building, testing, troubleshooting, repairing and modification or electronic or electro-mechanical devices, assemblies, subsystems, and systems.

Typical tasks include:

Circuit Card Assembly rework
Wiring of electrical assemblies
Test electrical cable assembly and repair
Thru hole and surface mount soldering
Use of basic electrical test equipment
Ocilloscopes, multi-meters, power supplies

Job Number: 2110123440
Job Location: Vergennes, VT
Duration: 4 months
Input Date: 01/12/2021
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003POCRQA4&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking an Electronics Technician for an opening in Fort Worth, TX.

RESPONSIBILITIES:
Consist of engineering hardware fabrication support, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis', cable harnesses, and mechanical rack fabrication using development engineering drawings.

REQUIRED EXPERIENCE:
Candidate must be capable of working independently, discussing technical issues with Hardware Build Leads. Electrical or Mechanical fabrication experience and the ability to interpret engineering drawings/schematics are highly preferred.

Looking for motivated technicians that:
Can follow directions
Accomplish work in a timely manner
Ask questions to Build Leads about job tasks
A Team Player
Attention to detail
Has a basic knowledge of interpreting engineering drawings/schematics
Dependable and willing to learn

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10
Full-Time

Job Number: 187988
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Embedded Software Engineer

Description:
PDS is seeking an Embedded Software Engineer for an open position in Ft. Worth, TX

The 429 Embedded Software Engineer will be responsible for (but not limited to) the following:

Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
Develop and update requirements and verification traceability
Conduct software integration and testing on target hardware
Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:

Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:

Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
Experience with DO-178 Level A software or other embedded software development and testing is required.
Experience with Flight Controls Computer Software.
Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
Experience with Primary Development Environment:
- MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
- C/C++ code
- C# test scripts
- Serena Dimensions / PVCS
- Git
- Embedded Software Development environments

Job Number: 2010119389
Job Location: Fort Worth, TX
Per Diem: No
Duration: 12 months
Input Date: 11/18/2020
Last Updated: 03/04/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
804 Technology is currently looking for an Embedded Software Engineer for a long term contract job opportunity located in Fort Worth TX. The Embedded Software Engineer will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration
My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Salary is based on experience and Per Diem is available to those that qualify. Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com

Embedded S/W Engineer – 429 Program:
The 429 Embedded Software Engineer works in Ft. Worth, TX and will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:
• Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
• Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with Primary Development Environment:
• MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
• C/C++ code
• C# test scripts
• Serena Dimensions / PVCS
• Git
• Embedded Software Development environments

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Software Eng804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Contractor IV

Description:
Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Required
Gulfstream Experience Required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

•10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

•Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

Job Number: 160870
Job Location: Savannah, GA
Rate: $68.00 - $75.00
Per Diem: Possible
Overtime: Yes
Duration: Open End Contract
Start Date: ASAP
Input Date: 01/11/2021

Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA. Please send your resume to pzack@pdstech.com for consideration.

Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
Provide design and process improvement feedback to engineers.
Able to work with minimal direction
Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
Knowledgeable in basic inspection and hand tools
Interpret drawings and instructions
Requires travel up to 20% of the time
Soldering experience including use of heat guns for shrink tubing operations a plus.
Leverages other factory resources and personnel to get work done for the team
Must be willing and able to obtain a security clearance
Perform other related duties as assigned
Ability to train other associates as needed.
Section inert welded parts a plus.
Ability to perform basic machining functions (no energetic parts).
Oversees build and testing process flow of development hardware.

Education Required: High school diploma or equivalent. Technical training and job related certifications preferably in special processes.
Experience Required: 3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

Job Number: 2010119057
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7SZQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
A Engineering Technician job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. To be considered for this role, you will need 2+ years of experience with a Associates Degree in related field or study.

Engineering Technician Job duties:
* Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
* Constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure company systems and components meet established specifications.

Qualifications:
* Associate's degree in a related field of study and at least 2 years of relevant experience.
* A higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Previous experience and/or certifications within the aerospace and defense industry.
* Previous experience in a manufacturing environment.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* The ability to obtain and maintain a Security Clearance may be required Learn more about the background check process for Security Clearances.

If you are interested in this Engineering Technician job in Louisville, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 305951
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/05/2020
Last Updated: 01/21/2021

Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Custom Fabrication Estimator

Description:
An Estimator job in Rockwall, Texas is currently available through Belcan. This is a direct hire opportunity with one our manufacturing clients that specializes in electro-mechanical assembly, precision sheet metal fabrication, CNC machining, welding, laser cutting, and powder coating. To be considered for position, you must have previous precision sheet metal experience with a good understanding of shop floor and processes.

Estimator Job duties:

* Reviews data to determine material and labor requirements and prepares itemized lists.
* Calculate run times, provide material, equipment, and labor estimate for Sheet Metal.
* Understand the scope of work to bid after reading a SOW, project narrative, or RFP.
* Establish and maintain working relationships with vendors and sub vendors.
* Translate User Needs into Design Input Requirements to comply with regulatory requirements and best-practice standards.
* Promotes the company's capabilities and expertise when dealing directly with key decision-makers in the owner or general contracting companies.
* Participates in pre-bid meetings and bid strategy meetings when requested.

Qualifications:

* High School Diploma or equivalent.
* Five plus years' of electromechanical assembly estimating experience in a sheet metal fabrication manufacturing work environment.
* Knowledge with SolidWorks.
* Experience with an ERP System.
* Mathematical Skills: Must be able to use general business mathematics, algebra, and geometry to calculate loads and CFM requirements.

If you are interested in this Estimator position in Rockwall, Texas please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

Job Number: 307884
Job Location: Rockwall, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/23/2020
Last Updated: 02/22/2021

F5 Engineering Ground Test / Structural Laboratory Technicians (1st Shift)

Description:
PDS Tech is seeking 1^st and 2^nd shift F5 Engineering Ground Test / Structural Laboratory Technicians in Stratford CT.

The Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnLJQA0&URLSource=cjhunter

F5 Engineering Ground Test Laboratory Technician - 1st Shift

Description:
PDS Tech is seeking 1^st and 2^nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

Job Number: 2010121878
Job Location: Stratford, CT
Per Diem: No
Duration: 15 months
Input Date: 11/24/2020
Last Updated: 03/04/2021

F7 Ground Test and Aircraft Instrumentation Technician

Description:
PDS Tech is seeking an F7 Ground Test and Aircraft Instrumentation Technician in Stratford CT.

The ideal candidate will work from Engineering Requests, Procedures and Drawings with limited guidance to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

This position requires:

planning, building and terminating the various cable harnesses required in the Instrumentation System.
Assisting in performing System and Sensor Calibrations.

The working environment consists of the Structural Test Lab, Remote Test Stands (Engineering & Quality Assurance) as well as Offsite support to include Aircraft Instrumentation.

This position requires a good working knowledge of Instrumentation Sensors, Slip Rings and Data Acquisition Systems.

Must possess:

A strong Mechanical and Electrical background and familiarity with Strain Gauges and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
Ability to perform Strain Gauge installations (preferred)
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.

Job Number: 2010111535
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 12/29/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fiuZQAQ&URLSource=cjhunter

F7 Ground Test and Aircraft Instrumentation Technician (Strain Gauge experience)

Description:
PDS Tech is seeking an F7 Ground Test and Aircraft Instrumentation Technician for an open position in Stratford CT

The ideal candidate will work from Engineering Requests, Procedures and Drawings with limited guidance to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.

The candidate will assist in performing System and sensor calibrations.

The working environment will consist of the Structural Test Lab, Remote Test Stands (Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation

Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.

Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.

Ability to perform strain gauge installations preferred.

Must be able to work from elevated work platforms at various heights.

Must be willing and able to work in inclement weather.

Must be capable and comfortable working within a diverse team environment.

Job Number: 2010122702
Job Location: Stratford, CT
Duration: 12 months
Input Date: 12/15/2020
Last Updated: 03/04/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
• The primary responsibilities will include design, manufacture, integration, and testing of mechanical flight control systems for the aircraft.
• Specific tasks will include the design of mechanical flight control elements, mounting and support brackets, part manufacturing, kinematic system analysis, system testing, and on aircraft integration.

Qualifications
• 5+ years industry experience as a flight control, landing gear, or mechanical systems engineer
• Understanding of complex kinematic systems
• Ability to design mechanical components and support bracketry. Experience with part drawing generation and the part release process.
• Ability to generate free body diagram and evaluate primary load paths in mechanical systems
• Excellent communication and organizational skills
• Ability to author and execute test plans which will be used to verify the design intent meets requirements
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification

It would be great if you had
• Experience with hydro-mechanical flight control systems and components
• Experience with manned experimental aircraft flight testing
• Experience with component stress analysis for part release
• Experience developing and refining system level requirements from formal and informal sources

Job Number: 45-002
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 1 Year +
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Flight Controls Technician

Description:
Chipton-Ross is seeking 8 Flight Control Technicians

JOB SUMMARY:
Responsible for mechanical maintenance (preservation, repair, inspection, overhaul, replacement of parts) on Commercial aircraft types in strict adherence to instructions provided in appropriate technical documentation.

ESSENTIAL RESPONSIBILITIES:

1. Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor's directives and manuals to complete all routine and non-routine assignments in a timely manner.

2. Operationally check, test, rig and adjust aircraft flight control systems to ensure functionality to manufacturer's specifications.

3. Support training activities within the crew including assisting and providing on the job training to lesser skilled mechanics.

4. Maintain and store various tools in a serviceable condition.

5.Adhere to safe maintenance practices and keep a clean work area.

6. Maintain and supply personal records of work performed on OJT forms for the Training Department.

7. Successfully complete any courses deemed necessary by the Training Department.

8.Perform any work that may be assigned by his or her supervisor.

WORKING ENVIRONMENT:

SUPERVISION: Under general direction. Normally performs duties after receiving general instructions as to methods, procedures, and desired end results. Some opportunity for discretion when making selections among a few, easily identifiable choices. Assignment is usually reviewed upon completion.

INTERPERSONAL RELATIONS: A moderate level of interpersonal skills is required to maintain an effective relationship with co-workers and supervision.

PHYSICAL ENVIRONMENT: Requires easy mobility around various sections of aircraft and
the dexterity to remove and replace parts in a timely manner. Requires mental skills and quickness with the ability to cope with stress and intense effort or exertion usually caused by long working hours. Must have the capacity to gain knowledge by hearing for one's own safety due to the dangers involved. Working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 50lbs. and report to work regularly.

OWNERSHIP OF TOOLS: Must possess a toolbox containing the minimum tools required for APG mechanics.

JOB QUALIFICATIONS:

EDUCATION: High school diploma or GED required. A&P License desired or specialized training.
EXPERIENCE: Minimum of 5 years preferred in heavy commercial maintenance.

PREFERRED EXPERIENCE: Flight Controls experience with MD11's, however any aircraft will suffice.

Job Number: 188680
Job Location: San Antonio, TX
Rate: $27 to $30.00 DOE
Duration: 6 Months
Input Date: 01/04/2021
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Dan Mulvihill
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmulvihill@chiptonross.com
Website: www.chiptonross.com

Flight Test Engineer

Description:
Seeking Flight Test Engineer for long term contract in Savannah, GA
Skills:
Test experience supporting aircraft propulsion or aircraft mechanical systems. Email resume and then call Peggy at 774-210-4108.

Job Number: Flight Test PL
Job Location: Savannah, GA
Rate: $75-77/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2 weeks
Input Date: 12/16/2020
Last Updated: 03/04/2021

Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Lundie
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Flight Test Engineer - Propulsion/Mechanical Systems

Description:
**Shift is 4x10**

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Unique Skills:
Flight Test experience supporting aircraft propulsion or aircraft mechanical systems

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job .

Job Number: 374602
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/16/2020
Last Updated: 03/04/2021

Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Flight Test Engineer - TS II

Description:
Inconen is looking for a Flight Test Engineer - TS II for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Test experience supporting aircraft propulsion or aircraft mechanical systems

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Job Number: 12738
Job Location: Savannah, GA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 02/24/2021

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Flight Test Engineer - TS III

Description:
Inconen is looking for a Flight Test Engineer - TS III for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Test experience supporting aircraft propulsion or aircraft mechanical systems

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 years specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job .

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Job Number: 12737
Job Location: Savannah, GA
Rate: $72.00 - $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 02/24/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer II

Description:
Test experience supporting aircraft propulsion or aircraft mechanical systems

Job Number: 20-160048
Job Location: GA
Per Diem: Split
Overtime: Possible
Duration: Up to $77.00 per hour
Start Date: Asap
Input Date: 01/06/2021

Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design

Description:
Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Required
Smal Business Jet Design Experience Required - Cessna, Embraer, Gulfstream, etc

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of The Company's products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
.

Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design

Description:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Required

Job Number: 21-160870
Job Location: GA
Rate: $75.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 01/11/2021

Flight Test Mechanical Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Required
Gulfstream Experience Required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Job Number: 374611
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/11/2021
Last Updated: 03/04/2021

Flight Test Mechanical Design Engineer

Description:
Inconen is looking for a Flight Test Mechanical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Flight Test Mechanical Design Experience Required.
Smarteam Experience Required.
CATIA V5 Required.
Gulfstream Experience Required.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Job Number: 12784
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/14/2021
Last Updated: 02/24/2021

General Laborer

Description:
PDS Tech, Inc. is seeking a General Laborer, in Lenexa, KS
cleaning refrigeration machinery
MINIMUM JOB REQUIREMENTS:

-Basic mechanical assembly and disassembling skills

-Able to read, understand and follow written procedures

-Basic knowledge of mechanical unit operation

-Have basic computer skills (MS Excel, MS Word, Outlook)

-Basic electro-mechanical device operation, disassembly and assembly

-Good verbal and written communication skills

PREFERRED:

-Minimum 1 years of related work experience

-Cognizant of applicable regulations, customer/manufacturers requirements associated with the units

-Ability to understand and use simple aviation and refrigeration terminology

-Ability to read and interpret blueprints and schematics

-Refrigeration/heating experience

Job Number: 2010122185
Job Location: Shawnee Mission, KS
Duration: 6 months
Input Date: 12/01/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PGrLQAW&URLSource=cjhunter

General Mechanic Level 2

Description:
Chipton-Ross is seeking 9 General Mechanic Level 2's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

EDUCATION:
High School Diploma/Accredited GED.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 188024
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Ground Test Engineer

Description:
PDS Tech, Inc. is seeking a Ground Test Engineer, in Stratford, CT
Description:

Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
Support and manage the development, coordination and conducting of technical tests and evaluation of engineering design concepts and understands and can develop and analyze test plans.
Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
Compilation and analysis of performance reports

Experience/Qualifications

BA/BS candidates require 4-7+ years’ experience,
MA/MS candidates require 2-5+ years’ experience,
PhD candidates require 0-2+ years’ experience.

Job Number: 2010113302
Job Location: Stratford, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT

An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.

The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.

They will:

Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
Support and manipulate Microsoft based tools in support of project schedule and status.
Communicate with other program integrated product teams.
Compile and analyze performance reports.

.
The ideal candidate will have:

Superior business and data skills,
Knowledge of IMS based project management and can work in a team environment.
Understanding of Aerospace, Helicopter and / or development program experience
Knowledge of mechanical / structural design and test

Looking for someone who can jump in, learn the tools and support this ambitious test program. Someone who has been around development programs, engineering and / or even test. The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.

Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Hot Stamp Operator

Description:
As a Hot Stamp Operator, you'll be trained how to operate each machine utilized in production of insert chip technology secured cards. You will be responsible for the set up and operation of the machines and will program computer batches from an order ticket to load data. In this role you will perform quality checks, confirm quantity produced, and ensure the batch is correct per the job ticket. A great machine operator is reliable and able to work with attention to detail and safety standards. The overall goal of this role is to ensure that production procedures are carried out smoothly to maximize efficiency.

In this role, you will perform the following duties:
o Set up machines (calibration, cleaning etc.) to start a production cycle.
o Control and adjust machine settings, according to the job ticket.
o Feed raw material or parts to semi-automated machines.
o Inspect parts with precision and measuring tools.
o Test operation of machines periodically.
o Resolve machine errors and issues that might occur while operating.
o Maintain activity logs related to daily secured card production.

Basic qualifications for consideration:
o High School Diploma or equivalent is preferred but is not required.
o Experience in a fast paced, high volume production environment and understanding of production concepts.
o Strong mechanical aptitude.
o Deep knowledge of production operation.
o Experience operating a computer workstation.
o Ability to work overtime including Holidays and weekends during peak periods.
o Flexibility with working in other areas on occasion.
o Strong ability to multi-task.
o Ability to work with associates with collaboration related to productivity, safety and quality of work.

Physical Requirements:
o Be able, as it is necessary-to climb, stretch, crouch or kneel.
o Successful performance requires good vision including close vision for accurate attention to detail.
o Work requires incumbent to be mobile and in a standing / walking position.
o Ability to lift up to 50 lbs regularly.
o Uses hands to handle, finger, or feel objects and to perform keyboarding.

Job Number: 2010115285
Job Location: Nashville, TN
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou0wQAC&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area. This is a direct hire position for 2nd shift.

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:

Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
Must be detail-oriented and adept at accuracy.
Must be flexible and able to work with a variety of different people and in different areas depending on business need.
Interpret drawings and written work instructions.
Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
Prioritizes workload such that production delays are minimized or eliminated.
Ability to interface directly with customer representatives.
Perform other related duties as assigned.
Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed

Qualifications:

Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
Ability to interpret basic drawings and instructions
Good written, verbal, mathematical and analytical skills
High School degree
IPC 600, 610 and JStandard certification preferred

Qualifications:

Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
Ability to interpret basic drawings and instructions
Good written, verbal, mathematical and analytical skills
High School degree
IPC 600, 610 and JStandard certification preferred

Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

In process Inspector

Description:
PDS Tech is currently recruiting for an In Process Inspector in the Hollister, CA area.

This role has potential for overtime and pay differential for 2nd shift.

Duties:

Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
Must be detail-oriented and adept at accuracy.
Must be flexible and able to work with a variety of different people and in different areas depending on business need.
Interpret drawings and written work instructions.
Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
Prioritizes workload such that production delays are minimized or eliminated.
Ability to interface directly with customer representatives.
Perform other related duties as assigned.
Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed

Qualifications:

Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
Ability to interpret basic drawings and instructions
Good written, verbal, mathematical and analytical skills
High School degree
IPC 600, 610 and JStandard certification preferred

Qualifications:

Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
Ability to interpret basic drawings and instructions
Good written, verbal, mathematical and analytical skills
High School degree
IPC 600, 610 and JStandard certification preferred

Job Number: 2010119109
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Lead Structural Designer

Description:
You will lead and energize a group of engineers to develop and certify an aircraft structure from conceptual design through entry into service. You will guide structures through all the process gates and ensure the design and schedule is met to produce the highest quality and efficiency possible for all current and future aircraft programs.

Your Key Responsibilities:
• Generate and track schedules based on project milestones from preliminary design through entry into service.
• Evaluate progress and actions based on KPI’s including Earned Value, Schedule Performance and Cost Performance.
• Conduct design reviews with the team to understand status and configurations and provide guidance and critical feedback to the team to resolve issues.
• Propose and conduct configuration trade studies to reduce cost and/or weight.
• Conduct status meetings to ensure team is aligned on company initiatives and support program technical reviews with Senior Leadership.
• Hire, coach, and mentor a team of talented engineers. Create and implement talent development plans with structures team members.

Who You Are:
You have a Bachelor’s degree or higher in Mechanical Engineering along with 10+ years of experience in primary and secondary structure design, composite primary structure and/or FAA DER preferred. Your experience has led to an understanding of load paths, materials and hardware selection as well as manufacturing process capabilities. You are a highly effective communicator and agile problem solver who is able to quickly devise strategies.

The Structures Company is an AA/EOE.

Job Number: 443
Job Location: Greensboro, NC
Rate: $104-$153K **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 02/24/2021
Last Updated: 03/04/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Loader

Description:
Chipton-Ross is seeking a Part-Time Loader for an opportunity in Grove City, OH.

The Warehouse Loader is responsible for assisting in all warehouse activities including, but not limited to, loading, repackaging, inventory, and maintenance. key responsibilities

EXECUTION
Assist with loading trucks with Client products in a way that complies with Company standards. Confirm trucks are loaded accurately, as per Account Manager's request. Ensure product is rotated on trucks and in warehouse in accordance with expiration dates. Properly clean and repackage product as set forth by Company standards. Appropriately dispose of damaged and / or Out Of Code (OOC) product once approved by the Operations Manager. Maintain cleanliness of warehouse by disposing of trash nightly, sweeping floors daily and using floor scrubber periodically.
PHYSICAL REQUIREMENTS
Employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. Employee frequently is required to walk and sit. Employee is occasionally required to stand and stoop, kneel, crouch, or crawl. Employee must regularly lift and/or move up to 25 pounds as needed. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Exposed to moving mechanical parts and outside weather conditions Noise level in the work environment is usually moderate Forklift and commercial vehicle operations minimum experience and qualifications Minimum 18 years old Current driver's license with clean driving record Mathematical skills, including the ability to add, subtract, multiply and divide

PART-TIME (approximately 25 hrs)
WORK HOURS: Monday-Friday: 11:30am-5:30pm

Job Number: 188292
Job Location: Grove City, OH
Rate: $DOE
Duration: 3 weeks
Input Date: 11/18/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

Loads & Dynamics Engineer 3 & 4

Description:
Job Description:

Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

Required:

Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
Experience in Modelling & Simulation and Tools & Process development.
Demonstrated problem-solving skills.
Possess interpersonal communication (written & verbal) skills in a team oriented environment.
Ability to interact professionally with customer, supplier, field & production representatives.
Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.

Job Number: 2010110794
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 12/01/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer, Special Missions (Weekend 1st Shift)

Description:
Inconen is looking for an MRB Engineer for our client, a well-known Aerospace Company, in Brunswick, GA.

Unique Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Weekend 1st shift. Typically 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Job Number: 12661
Job Location: Brunswick, GA
Rate: $67.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/11/2021
Last Updated: 02/11/2021

Machinist 2

Description:
Chipton-Ross is seeking a Machinist 2 for an opening in Chelmsford, MA.

RESPONSIBILITIES:
Sets up and operates a variety of manual and numerically controlled (NC) precison machine tools to make a variety of components, jigs, mechanisms, and/or tools to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on NC machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
- Ability to setup and operate precision 3-axis CNC machines such as Robodrill and Prototrak type machines.
- Ability to produce and edit G-Code NC programs with CamWorks or similar (CAD/CAM software).
- Ability to make on the fly adjustments as needed at the HMI.
- Familiarity with Fanuc, Fadal, and Prototrak controls.
- Familiarity with GD&T.
- Effective planning, prioritizing, and organizing tasks.
- Ability to follow work instructions or engineering drawings.
- Demonstrable commitment to safety at all times.
- Quality oriented and maintains strict attention to detail.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, 1st Shift
Full-Time

Job Number: 188032
Job Location: Chelmsford, MA
Rate: Up to $32.00 DOE
Duration: 4 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Maintenance Tech

Description:
Maintenance Technician performs the Equipment Trouble Shooting, Preventive Maintenance, Change Overs and Set Ups.

Responsibilities

Perform the Preventive Maintenance of the Process and Packaging Equipment.

Perform Trouble Shooting and Corrective Maintenance of Equipment.

Provide support in product change overs and change parts set ups.

Identify and correct PLC related issues with the equipment.

PLC based system fault finding and specification.

Assist with CAPAs, CCRs and NCRs in the maintenance department.

Support the installation and commissioning of new equipment.

Manage the Preventative Maintenance Blue Mountain System.

Provide support for Building Maintenance.

Provide support for Pest Control Activity.

Provide support and maintenance for Lab Instrument Maintenance.

Skills Required:
Must possess strong communication skills (verbal and written) including formal presentations.
Must be able to deal effectively with all levels of the organization.
Knowledge of equipment qualification: IQ, OQ and PQ,
Must possess excellent organization skills and the ability to multi-task and prioritize with minimal direction.
Must possess strong time management skills.
Education and Experience Required:
Technical Training preferably in, Electrical or Mechanical Engineering or equivalent experience.
5+ years of experience in Process and Packaging Equipment Maintenance in Pharmaceutical Industry.
Physical Requirements:
Lift up to 50 pounds on a regular basis
Ability to work on ladders, scaffolds and in the HVAC area
In accordance with FDA regulations (21CFR 211.68), individual must be free from illness that could jeopardize the safety or quality of products. Such illnesses may include, but are not limited to, illnesses that cause bleeding, open lesions, flaking or peeling skin.
Work Environment:
Office, warehouse, manufacturing environments and external plant facilities.
Ability to wear the required PPE for manufacturing environment.
Perform other duties as required and assigned.

Job Number: 2010121323
Job Location: Fenton, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PDeaQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manager, Structural Design

Description:
Education:
Bachelor’s in Mechanical or Aerospace Engineering
Minimum 15 years, with at least 5 in a Supervisor/Manager role

Technical skills
• Experience with 14 CFR 23 or 25 regulations
• Primary and secondary structure design. Experience with composite primary structure is preferred
• Capable of both working independently and of leading design teams by providing clear, accurate technical guidance.
• Experience using CATIA V5 CAD system in a fully integrated PLM environment.
• Good understanding of load paths, materials and hardware selection.
• In depth understanding of manufacturing process capabilities.

Product Development skills
• Demonstrated proficiency at managing New Product Development Project from Advance Design Phase through Entry into Service
• Capable of creating and managing a budget and schedule for large scale projects
• Demonstrated expertise at managing Tier 1 Suppliers
• Demonstrated expertise at managing engineering resources to meet project milestones and objectives.
Leadership skills
• Team leader: Able to motivate and mobilize a workforce. Excellent team player who is humble, diligent with good intrapersonal skills.
• Technical Leader: Able to evaluate complex problems and motivate a team to find innovative solutions.
• Leader Coach: Highly proficient at identifying, growing and developing talent
• Excellent communication and presentation skills.
• Demonstrated capability of planning and executing a project.
• Demonstrated capability of establishing and implementing a strategic vision.
• Demonstrated proficiency at leading a multi-disciplinary team of engineers.

The Structures Company is an AA/EOE.

Job Number: 444
Job Location: Greensboro, NC
Rate: $122-$174K **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 01/19/2021
Last Updated: 01/20/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Manufacturing Engineers -- Mechanical

Description:
Multiple Openings for Mechanical Manufacturing Engineers for first or split shift (1st to 2nd, flexible hours) to complete tasks as related to aerostructures in support of aircraft build, tooling, liaison, and planning

Manufacturing Engineering support of aircraft build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications; candidate will review, sign-off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations; will proactively coordinate with design engineering and other disciplines and actively engage in continuous quality improvement; must be flexible and highly motivated with proven technical ability and business judgment with the ability to work on multiple programs; good communication skills required; 5+ years of manufacturing engineering experience preferred; must be proficient in all processes associated with manufacturing engineering; proficiency with Solumina, Matrix, Microsoft programs, CATIA, CADRA, Right Hemisphere, and SAP is mandatory; rotary wing experience is highly preferred; contract is for minimum of 12 months

Locations: Stratford, CT; West Palm Beach, FL; and Troy, AL

RCMT offers a very competitive benefit and salary package

Contact: Harry Pember, Vice President Engineering (203) 258-4362 - text is best
or send resume to: support.aerospace@rcmt.com

Job Location: CT/FL/AL
Input Date: 12/21/2020

Firm Name: RCM TECHNOLOGIES INC
Attention: Harry Pember
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/258-4362
Email: support.aerospace@rcmt.com
Website: www.rcmt.com

Manufacturing Engineers -- Mechanical & Electrical, multiple openings

Description:
Multiple Openings for Mechanical Manufacturing Engineers & Electrical Manufacturing Engineers, and NC Programmers for first or split shift (1st to 2nd, flexible hours) to complete tasks as related to aerostructures in support of aircraft build, tooling, liiason, and planning

Manufacturing Engineering support of aircraft build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications; candidate will review, sign-off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations; will proactively coordinate with design engineering and other disciplines and actively engage in continuous quality improvement; must be flexible and highly motivated with proven technical ability and business judgment with the ability to work on multiple programs; good communication skills required; 5+ years of manufacturing engineering experience preferred; must be proficient in all processes associated with manufacturing engineering; proficiency with Solumina, Matrix, Microsoft programs, CATIA, CADRA, Right Hemisphere, and SAP is mandatory; rotary wing experience is highly preferred; contract is for minimum of 12 months

Locations: Stratford, CT; West Palm Beach, FL; and Troy, AL

RCMT offers a very competitive benefit and salary package

Contact: Harry Pember, Vice President Engineering (203) 258-4362 - text is best
or send resume to: support.aerospace@rcmt.com

Job Location: CT/FL/AL
Input Date: 12/21/2020

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:

Assist the Press Operator in running the production line.
Learn basic press operation.
Pack finished product.
Operate finishing equipment.
Prepare tooling for production, including die inventory management and basic tooling set up.
Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

A position working at a world-class Fortune 100 manufacturer
Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
A fair and consistent pay check

Education:

• High school diploma or GED Required

Experience:

• Prior experience in manufacturing preferred

• Demonstrated mechanical aptitude via educational or job experience

Skills:

• Basic computer navigation and data entry skills required

• Basic to intermediate mechanical skills required

• Ability to lift up to 50 lbs unassisted

• Willingness and ability to perform in a fast paced team environment

Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 12/17/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Processes Engineer III

Description:
Must-haves:
• B.S. degree in Materials Engineering or similar engineering or technical discipline.
• 6 or more years of experience as a materials science or materials engineer in the aerospace field
• Experience writing test plans, conducting tests and writing test reports (including flammability and characterization)
• Well versed with industry standards for materials, processes and mechanical parts selection and management
• Knowledge of engineering materials such as metals, intermetallics, polymers, composites, ceramics, etc.
• Knowledge of industry processes regarding materials (welding, high energy machining, adhesive bonding, surface preparation, metallic coatings, soldering, staking, conformal coat, etc.)

Preferred:
• Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLAB
• Practical knowledge of industry standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE)
• Experience or certification in INCOSE standards
• Background in the Aerospace and Defense Industry
• Ability to administer baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures
• Exposure to establishing and tracking key Technical Performance Measurements (TPM)

The Structures Company is an AA/EOE.

Job Number: 436
Job Location: CO
Rate: Up to $53/Hr. **DOE**
Per Diem: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/09/2020
Last Updated: 01/22/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanical Systems Design & Analyst Engineer 4 Top Secret

Description:

PDS Tech, Inc. is seeking a Mechanical Systems Design & Analyst Engineer 4 Top Secret in El Segundo, CA
Description

Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
Leads activities to validate and verify mechanical and fluid systems requirements.
Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation.
Performs and documents analyses.
Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design.
Supports proposal preparation and new business development efforts.
Trains and coaches others.
Works under minimal direction.
The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering.

Primary Responsibilities
*Develop and verify space vehicle mechanical design.
*Analyze and verify mechanical performance of hardware components a vehicle.
*Perform detailed system design and verification activities.
*Support system level integration and validation.
*Analyze system level performance.
*Perform analyses and trades in support of a rapid prototype system.
*Manage performance of critical suppliers to ensure subsystem compliance and delivery.

Education

Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering. *9 years or more of experience in aircraft or spacecraft mechanical design. *3 years or more of experience in supplier technical evaluation and technical performance management.

Basic Qualifications

This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design.
Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment.
This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our teams capabilities.

Preferred Qualifications
*Experience leading an integrated product multi-disciplinary team
*Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
*Experience integrating design at spacecraft level
*Experience working with spacecraft mechanical design
*Experience in development, build and test of small and medium-sized space vehicles
*Experience in dynamic rapid prototyping environment
*Experience working on proprietary programs with a variety of Government entities in a classified environment
*SSBI (Single Scope Background Investigation) highly desired

Job Number: 2010119880
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215
City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P9fuQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler/Test Technician

Description:
A Mechanical Assembly & Test Technician job in Houston, TX is currently available through Belcan with one of our Manufacturing clients. You will be responsible for identifying mechanical components; and to perform required mechanical and final machine assembly. To be considered for this role, you will need a High School Diploma or GED and at 1 to 3 years of relevant experience. This is a great opportunity with a great company.

Mechanical Assembly & Test Technician Job duties:

* Assemble and test various pressure control equipment as it relates to the oil and gas industry using drawings and / or description of parts.
* Assembly will be done using basic hand tools and small power tools.
* A fundamental principle of safety is required by all applicants who must follow all instructions and guidelines.
* Performs tasks associated with troubleshooting, testing, and assembling mechanical assemblies for drilling control systems for both surface and subsea applications

Qualifications:

* High School Diploma or GED and at least 1 to 3 years of relevant experience.
* Experience in identifying mechanical components; and to perform required mechanical and final machine assembly.
* Has manual dexterity and understanding to use in-house measurement instruments, including: scales, calipers, micrometers, height gage, gages, etc.

If you are interested in this Mechanical Assembly & Test Technician job in Houston, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 308362
Job Location: Houston, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2021
Last Updated: 01/19/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Dynamic Systems

Description:
***REMOTE TO START, BUT EVENTUALLY ONSITE***

Seeking a Mechanical Design Engineer to design parts of the drive system. Qualified candidates will be responsible for designing, and analyzing sophisticated dynamic system components and assemblies for the aircraft. This role requires the candidate to thrive in a high paced environment and be comfortable with the design, development, and test life cycle of rapid aerospace R&D. This role will include interfacing with engineering management, certification authorities, operations, external suppliers, and fellow design engineers and analysts, so strong communication and inter-personal skills are required.

Roles and Responsibilities:
• Design mechanical parts and assemblies for critical drive systems
o Includes gears, shafts, housings, bearings, propeller hubs, blade pitch control mechanisms, and electrical motors
• Create CAD parts and assemblies, create drawings for manufacture, assembly instructions
• Perform initial sizing of parts and components
o Hand calculations, spreadsheets, initial FEA/FEM
• Review other mechanical designs and drawings
o Review for design intent, sizing, manufacturability, and GD&T
• Support initial builds and manufacture by close collaboration with the machine shop
• Support developmental test efforts (ground and flight)

Required Qualifications:
• Minimum of 3 years of professional industry experience
• BS, MS, or PhD in Mechanical or Aerospace Engineering or related field
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or equivalent
• Highly skilled in generating detailed drawings, GD&T to ASME Y14.5-2009 standards
• Strong mechanical design aptitude and analytical mindset and a track record of mechanical system design in weight critical applications
• Extensive understanding of mechanical design fundamentals and analysis methods for structures, assemblies, mechanisms, and joints

Desired Qualifications:
• Extensive Experience with finite element analytical tools such as HyperMesh OptiStruct or Nastran, ANSYS or similar
• Experience in mechanism design and kinematics
• Experience with composite structures and applications
• Familiarity with component and sub-system FAA certification testing is a plus
• Prior experience preparing certification plans and reports, and interacting directly with FAA specialists or Designees, is highly desirable

The Structures Company is an AA/EOE.

Job Number: 446
Job Location: CA
Rate: Salary - **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 02/01/2021
Last Updated: 02/22/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanical Designer

Description:
Automation, robotics, and Inventor

Job Location: Pittsburgh, PA
Input Date: 11/23/2020

Firm Name: BELCAN TECHSERVICES
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Email: bcampbell@belcan.com
Website: www.belcan.com

Mechanical Dimensional Inspector

Description:
Perform a wide variety of complex inspections in the production process, including routine and non-routine visual, dimensional, mechanical, test, and functional setups and inspections

Other positions also available! Jobs updated daily at www.nesc.com

Job Location: Newington, NH
Input Date: 11/23/2020

Firm Name: NESC STAFFING
Attention: Joan
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: joan@nesco.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Conduct ship checks to gauge and project construction/overhauls progress
Develop space arrangement interface block diagrams
Provide development and modification of drawing products
Perform detailed technical reviews of ship Technical Data Packages (TDPs), Pre-Initial Change Proposal (PICP), ICPs, and Change Notices (CNs) to identify deficiencies within the products

Security Clearance Required

Job Number: 49304
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/04/2021

Mechanical Engineers

Description:
3D CAD, FEA a plus

Job Location: Midwest
Input Date: 11/23/2020

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus

Job Location: Southeast
Input Date: 11/23/2020

Mechanical Engineers

Description:
With sustaining experience

Job Location: Midwest
Input Date: 11/23/2020

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E

Job Location: CT/IN/FL/OR
Input Date: 11/23/2020

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Mechanical General Assembler-1st and 2nd shift

Description:
Perform all the duties of General Assembler. Assemble complex mechanical systems (e.g., axles, engines, etc.); set up, test and repair same; assemble, test, and repair major vehicle parts and components of cabins, bodies, chassis, and aerial. Such work is to be done under minimal supervision.
HS Diploma/GED
Able to use hand/power tools
Blueprint reading
1st and 2nd shift positions available
Mechanical Aptitude

Job Number: 2010122744
Job Location: Clintonville, WI
Duration: 6 months
Input Date: 01/13/2021
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PK0HQAW&URLSource=cjhunter

Mechanical System Design & Analysis Engineer 4

Description:
Chipton-Ross is seeking a Mechanical System Design & Analysis Engineer 4 located in El Segundo, CA.

RESPONSIBILITIES:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. Works under minimal direction.

The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering. This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design. Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment. This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our team�s capabilities.

ADDITIONAL RESPONSIBILITIES:
�Develop and verify space vehicle mechanical design.
�Analyze and verify mechanical performance of hardware components a vehicle.
�Perform detailed system design and verification activities.
�Support system level integration and validation.
�Analyze system level performance.
�Perform analyses and trades in support of a rapid prototype system.
�Manage performance of critical suppliers to ensure subsystem compliance and delivery.

REQUIRED EXPERIENCE:
� Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering.
� 9 years or more of experience in aircraft or spacecraft mechanical design.
� 3 years or more of experience in supplier technical evaluation and technical performance management.

ADDITIONAL EXPERIENCE:
� Experience leading an integrated product multi-disciplinary team
� Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
� Experience integrating design at spacecraft level
� Experience working with spacecraft mechanical design
� Experience in development, build and test of small and medium-sized space vehicles
� Experience in dynamic rapid prototyping environment
� Experience working on proprietary programs with a variety of Government entities in a classified environment

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

TRAVEL: YES
Frequent travel to Kent, WA may be required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 187761
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Service Engineering

Description:
Unique Skills:
The following unique skills are required:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.
The following are preferred skills:
1) Engineering experience, with Business Jets - e.g. Cessna, Gulfstream, Embraer, Bombardier, etc.
2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
3) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
4) Practical hands on aircraft repair experience and problem solving.
5) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Company's products and services

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Job Number: 132875
Job Location: Savannah, GA
Rate: $65 - $68
Per Diem: Possible
Overtime: Yes
Duration: Open End Contract
Start Date: ASAP
Input Date: 01/07/2021
Last Updated: 01/11/2021

Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Morelnd
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Mechanical or Manufacturing Engineers

Description:
Project management or overhaul experience

Job Location: West
Input Date: 11/23/2020

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters

Job Location: Nationwide
Input Date: 11/23/2020

Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Product Acceptance Specialist B

Description:
Chipton-Ross is seeking a Product Acceptance Specialist B for an opening in North Charleston, SC.

RESPONSIBILITIES:
Performs, collects and verifies data to support the identification of root cause routine problems. Supports quality source selection and process reviews of suppliers' ability to meet program quality requirements. Assists with hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements. Documents audit results in standard formats. Verifies routine product conformance to design requirements. Provides objective evidence of results. Performs auditing, surveillance and monitoring. Identifies and documents discrepancies. Segregates and controls non-conforming items. Performs preliminary review and disposition of non-conformance. Conducts product review with customer during product or process verification. Identifies repetitive or significant non-conformances and initiates requests for corrective action.

REQUIRED EXPERIENCE:
Suitable candidates for these structures contract positions will have ONE year of direct Aerospace Structural Experience as a minimum requirement, and preferably have THREE years of solid Aerospace Structural Experience. CANDIDATES WITHOUT AEROSPACE STRUCTURAL EXPERIENCE will NOT be considered.

ADDITIONAL REQUIREMENTS:
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.
Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Enabling technology/Innovation & Invention
Provide a means to generate giant leaps in performance and capabilities of the user using equipment and methodology. Possess knowledge of hardware and software components which, when properly integrated, enable a specific process to be realized. Understand that all technology enables something. Generates innovative solutions in work situations; tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Systems Thinking
Understands the big picture and the inter-relationships of all positions and activities in the organization, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans and anticipate future events.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the team�s energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

Technical Competencies
Analysis and Corrective Action
Knowledge of root cause analysis and corrective action of non-conformances to reduce scrap, minimize rework, reduce cost and improve quality to meet all requirements. Knowledge of the process for producing product definition data including emergent design changes.

Assembly Process
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Exp Hardware Inspect & Valid
Knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test hardware components and assemblies (e.g. conventional gages and measurment tools, CMM, laser tracker, theodalites). Familiarity with associated validation software for comparative analysis. Ability to document and report on results, and address descrepencies.

Non-Destructive Eval Processes
Knowledge of non-destructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, penetrant inspection).

Quality Systems Process
Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).

Repair Processes and Concepts
Knowledge of repair concepts including repair station processes, component repair concepts, procedures, and warranty processes and contractual agreements.

Test Data Analysis
Ability to identify the required test parameters, analyze test data to support of real time testing and post test requirements. Validation of test data calculations required.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent . High combination of education and experience (e.g. vocational school/Associate). High School Diploma o GED required

FULL TIME/VARIABLE SHIFT
Must be able to work variable shifts - 1st, 2nd 3rd

Job Number: 188617
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 12/17/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Product Repair/Mod Tech C

Description:
Chipton-Ross is seeking 2 Product Repair/Mod Tech C's located in Eglin AFB, FL.

RESPONSIBILITIES:
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 187818
Job Location: Eglin AFB, FL
Rate: $DOE
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Product Repair/Mod Technician C

Description:
Chipton-Ross is seeking a Product Repair/Mod Technician C located in New Orleans, LA.

RESPONSIBILITIES:
Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 188259
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 11/17/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-12259

Contract Opportunity

Location: Miramar, CA

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret

Minimum Education: High School Diploma / GED

Minimum Experience: 4 years

What You’ll Do:

Independently assemble, disassemble and troubleshoot numerous assemblies by changing, removing and replacing aerospace components, using general aerospace maintenance practices and aerospace product specifications to correct failures.
Remove and replace components for repair, replacement or testing, to support product serviceability.
Resolve and correct routine problems during operation, maintenance and overhaul of deliverable products.
Oversee assembly, disassembly or overhaul functions to ensure adequacy, accuracy and thoroughness of product assembly, disassembly and overhauls.
Measure and make adjustments independently, using shims, lapping or other documented processes, to satisfy specifications and ensure correct tolerances are obtained.
Identify and assist engineering with discrepancies.
Train and mentor less experienced personnel.
Independently perform routine and complex functional/diagnostic tests and troubleshoot aerospace/missile systems, using monitoring instruments and bench/automated test equipment, to determine root cause of initial or isolated failures.
Perform validation/verification testing of systems and components to ensure serviceability.
Troubleshoot for customers, using established fault isolation procedures, in order to isolate routine mechanical or electrical faults.
Troubleshoot with limited/little engineering or co-worker assistance.
Call out repairs, however consults engineering and customer with results, if needed.
Oversee training of individuals.
Independently document repairs, test results, applicable modifications and inspection results, using specific, detailed instructions and established processes and procedures, to ensure contractual and regulatory compliance.
Verify and ensure correctness of documented instructions and procedures to modify, troubleshoot, repair and test assemblies.
Assist engineering to rectify discrepancies found by technicians.
Properly identify discrepancies found with parts and assists with reconciliation of discrepancies.
Visually inspect component before installation or usage to verify cleanliness and serviceability of components.
Identify and document discrepancies found during inspection.
Aid in resolution of discrepancies found by technicians.
Independently perform modifications to satisfy deliverable products.
Understand and interpret required engineering drawings, instructions and technical specifications to advise technicians.
Resolve and correct routine and complex problems during modification of deliverable products.
Ensure adequacy, accuracy and thoroughness of product modification.

What You’ll Need:

Ability to obtain secret security clearance.
MV-22 Modification Team
Must be knowledgeable in aspects of V-22 aircraft maintenance, modification and repair to include skill and experience in either Electrical and Avionics or Airframes system disciplines.
Candidate must have knowledge of general aircraft maintenance and environment processes (FOD control, tool control, health & safety).

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High school diploma / GED combined with 4+ years of relevant work experience; Associates Degree / Vocational School combined with 2+ years of relevant work experience; or Bachelor’s degree.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2020-12259
Job Location: Miramar, CA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

Production Support Technician

Description:
Duties:
• Download, configure and test all units according to set procedures. Inspect for cosmetic failures.
• Fully erase any old program stored in unit as needed.
• Download appropriate test program into unit and fully test functionality of unit as needed.
• (Solder Tech Only) Using documented procedures, repair printed circuit boards or subassemblies by removing and installing electronic and/or mechanical components in the correct orientation and location. Use a soldering iron to perform hand soldering/de-soldering of through-hole and surface mount components; reinstalling electronic components into subassemblies with correct orientation and location.
• Using documented procedures, repair electronic equipment by replacing electronic or mechanical components within in the correct orientation and location (no Soldering necessary)
• Assemble, clean and test units.
• Record all units into repair tracking system.
• Report any informational discrepancies between the unit and its associated paperwork.
• Work within quality control standards; maintain a neat, clean and orderly workstation adhering to all safety standards.
• Assist with special projects as needed.

Candidate Requirements:
• High School diploma or equivalent
• 1 year work experience in a production environment or equivalent technical education
• Basic computer skills (data entry, basic PC navigation skills)
• Ability to communicate effectively
• Ability to read and understand Customer Specific Requirements
• Ability to work in a team environment

Job Requirements:
• Good working knowledge of ESD and workmanship requirements
• Electronics or computer/tablet repair/assembly experience
• Strong computer software and hardware skill
• Expected to read and comprehend process documentation including Bills of Materials and Assembly
drawings
• Expected to communicate well in English both verbally and in written format
• Component Identification Ability required
• Candidates should be very organized with the ability to keep count of parts
• Candidates should have the ability to carry out detailed written or oral instructions
• Assist in other duties required as business needs

Preferred Qualifications:
• Formal Soldering Training or equivalent military training
• Experience soldering / desoldering surface mount and through-hole components
• Electronic component identification
• Ability to read and interpret DMM's
• Computer certification

Job Number: 2110123375
Job Location: Marietta, GA
Duration: 12 months
Input Date: 01/11/2021
Last Updated: 03/04/2021

Project Engineer

Description:
Seeking a P.E. licensed Project Engineer with a Mechanical or Electrical Engineering Degree. Looking for a candidate with a strong knowledge and experience to start-up an MEP Division.

Requirements

Mechanical or Electrical Engineering Degree
Working knowledge of plans, prints, specifications and schematics associated with trade
5-10 years of construction experience with working knowledge of mechanical, electrical and plumbing
Knowledge of construction procedures and practices
Must be Computer literate
Possess excellent verbal and written communication and organizational skills

MEP Engineer RESPONSIBILITIES:

Mechanical Engineering Companies Achieve a detailed understanding of the Contract documents (drawings and specifications), phasing plans, MEP systems interrelationships, construction sequencing and project schedule.
Facilitate problem solving, as may arise, between MEP Subcontractors during construction.
Validate design issues related to MEP and suggest alternative solutions.
Assist in the receipt and review of MEP submittals.
Log and post all MEP changes and as-built information on field drawings.
Assist in the scope review, budgeting and justification of MEP change work order.
Assist in the installation of MEP work.
Direct, monitor and control the activities of MEP Subcontractor.
Coordination and administration of MEP related materials, systems and shop drawings submittals.
Liaison with Consultant MEP supervisory Engineers, Inspectors and relevant staff.
Ensure that MEP Subcontractors provides and adheres to relevant Quality documentation/records.
Ensure that MEP Subcontractors adhere to Project safety regulations.
Assist in the testing and commissioning of MEP equipment.
Requires a P.E.license

Job Number: 2010121424
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Test Engineer

Description:
Inconen is looking for a Project Test Engineer for our client, a well-known Aerospace Company, in Windsor Locks, CT.

Job Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Candidate should have experience with project management. In this role the candidate will work with outside test facilities to arrange testing. This will include writing of supplier test paperwork, interfacing with outside test facilities to arrange scheduling and arranging the packaging and shipment of the test item and support equipment to the outside facility. Prior experience with project engineering is preferred.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Education:
Bachelor’s Degree
5+ years of related experience

Job Number: 12684
Job Location: Windsor Locks, CT
Rate: $50.00 - 67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 01/13/2021

Propulsion Controls Engineer

Description:
Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

To be considered and complete submittal to client, please e-mail me the following:

1 Why are you looking for work?
2 Include an up to date resume
3 W-2 Hourly Rate request (Any benefit cost should be factored)
4 Day and month of birth for submittal (signature code for system).
5 Four Digits (unique identifier)
6 Your Availability upon offer

Job Number: BTX8912
Job Location: FT Worth, TX
Rate: 55-70hr.
Per Diem: offered
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 01/05/2021
Last Updated: 03/04/2021

Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Propulsion System OBD Control Engineer

Description:
The Propulsion System OBD Control Engineer is responsible for providing strategic and technical leadership in the area of propulsion system OBD control solutions. We are looking for top talent to grow OBD control development on next generation propulsion technologies. The candidate will join an agile & fast paced team of propulsion control engineers developing core control strategies, OBD strategies, and system requirements. Responsibilities include but not limited to:
• Leading all aspects of the OBD control strategy development process for a specific technology project including: leading the strategy development, control implementation design, regulatory assessments, setting algorithm performance KPIs, developing calibration methodologies, and competitive benchmarking.

Requirements:
• Bachelor of Science in Control System Engineering, or Mechanical/Electrical Engineering, or Aerospace/Aeronautical Engineering from an ABET accredited university.
• The ideal candidate will have a deep understanding of propulsion system control and OBD requirements and regulations for gasoline and electrified systems.
• Minimum 3 years of experience in OBD controls development - an advanced degree and/or academic research in a related field may count towards experience requirement.
• Demonstrated technical problem solving
• Strong overall knowledge of internal combustion engines & electrified propulsion systems.
• Experience with modeling, simulation, development, testing, and validation.
• Outstanding interpersonal, communication, and problem solving skills.

Preferred Requirements:
• Master of Science in Control System Engineering, or Mechanical/Electrical Engineering, or Aerospace/Aeronautical Engineering from an ABET accredited university
• Demonstrated application of technical excellence in OBD control strategies
• Deep understanding of propulsion system OBD requirements and regulations
• Engine calibration and/or embedded software experience
• Knowledge of propulsion control systems
• Instances of demonstrated application of technical excellence (developed new process, experimental or computational; developed new numerical or modeling procedure; developed new statistical procedure; developed new problem solving approach; etc.)
• Experience with data acquisition and analysis tools such as ETAS-INCA
• Experience with model-based development tools such as MATLAB/SIMULINK

Job Number: 2010122460
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 12/09/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PHlBQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Control Engineer

Description:
804 Technology is currently looking for Propulsions Systems Control Engineer for a long term contract job opportunity located in Fort Worth TX. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Salary is based on experience and Per Diem is available to those that qualify.
Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description
The Future Long-Range Assault Aircraft (FLRAA) Future Vertical Lift (FVL) Program has an opportunity available for a Propulsion System Controls Engineer. The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Propulsion804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Controls Engineer

Description:
The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements. This is for an entirely new aircraft design and function.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

Job Number: 11617740
Job Location: Fort Worth, TX
Rate: $75.00
Per Diem: Possible
Overtime: Yes
Duration: One Year May Be Extended
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

Quality Control Inspector III/CMM Operator - 1st & 2nd Shifts Available

Description:
PRIMARY RESPONSIBILITIES INCLUDE:

Receiving and Production Inspection

Inspect and file/record incoming part history records.
Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per provided Inspection and Test Plans, drawings and other specification requirements.
Read and accurately interpret specifications and part drawings.
Initiate nonconformance reports (NCs) as required
Ensure calibration and maintenance of inspection equipment is up to date prior to conducting inspection operations.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
High School Diploma or equivalent

Must-Haves:
2-5 years of relevant experience in machining or quality control
Minimum (5) years’ experience in mechanical inspection and inspection techniques utilizing a wide range of inspection equipment: CMM (preferably Zeiss), optical comparator, calipers, micrometers, height gages, etc.
3-5 year’s experience in aviation or spacecraft preferred
Proficient in GD&T per ASME Y14.5M; certification preferred.
Proficient with geometry and trigonometry: machine shop math
Proficient in Solidworks
Zeiss O-Inspect with Calypso preferred
Experience with a wide variety machined parts ranging in size, shape and complexity.
Self-starter requiring minimal supervision.
Strong attention to detail and problem solving skills
Effective teamwork, interpersonal, and communication skills.
Good written and verbal communication skills.
Experience with MS Excel and Word.

Preferred:
3-5 year’s experience in aviation or spacecraft preferred
Knowledge and ability to understand and interpret technical schematics and drawings
Knowledge and ability to interpret geometric dimensioning and tolerance
Experience with finished goods inspection
Experience with Costpoint and/or AEGIS-MES
Basic understanding of material flow in operations
Experience drafting work instructions and SOP's
Experience with Network+, Security+, CCNA and/or A+
Working knowledge of ISO 9000 and AS 9100 standards

The Structures Company is an AA/EOE.

Job Number: 434
Job Location: Denver / Boulder, CO
Rate: $30-$32/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 01/26/2021
Last Updated: 03/04/2021

Quality Inspectors

Description:

Position Summary: Responsible for the execution and confirmation of quality inspections as part of the production process with an emphasis on the aircraft structure and mechanical systems.
Primary Responsibilities:

Execute technical inspections in the production process of the aircraft
Prepare and perform visual, incoming, first article, final inspections during aircraft manufacture for compliance for compliance with design specifications, customers and certification requirements.
Document the technical inspections performed in the production orders as well as prepare first article inspection reports.
Support troubleshooting and participate in Quality Survey requests.
Compile all technical data of non-conformance in order to launch the based quality discrepancy sheets for the professional assessment in accordance with the manufacturing engineering documentation.
Document all the results of the technical inspector in the IT system.
Perform other duties as assigned

Qualified Experience / Skills / Training:
Education:

Quality Inspector Systems: A technician with a focus on Quality Inspection in system manufacturing in the aviation industry with a high school diploma.
Preferred: FAA Airframe & Powerplant License, an A&P license including inspection authorization is preferred.

Experience:

3 years of experience as a Quality Inspector in an international aviation company with an emphasis on mechanical and/or structural components and assemblies.
Previous experience in a mechanic or technician role is highly desirable
Airline experience is desirable

Licensure/Certifications:

A&P License (preferred)
Completion of Mechanical or Structures AND Quality Incubator training provided by the Company or an approved vendor is required. Please attach proof of completion of these trainings as part of application process.

Knowledge, Skills, Demonstrated Capabilities:

Knowledge of Quality Management Systems.
Knowledge of drawing systems, inspection plans, and inspection coordination.
Knowledge of the principles, practices, methods and tools used in the production line.
Handling and use of inspection tools of the length measuring techniques (mechanical, optional, electrical).

Job Number: 2110123309
Job Location: Arlington, WA
Duration: 6 months
Input Date: 12/30/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PN4kQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Reliability Engineer

Job ID # 2021-12289

Contract Opportunity

Location: Sterling Heights, MI

Industry: Defense

Clearance Requirement: Ability to Obtain Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 3 years

What You’ll Do:

Interface / coordinate effectively with engineers, support organizations, and customer.
Occasional week day and / or week end overtime required.
Perform reliability engineering and statistical data analysis activities
Perform Reliability assessments of new concepts including:
Predictions and Allocations
Failure Modes
Effects Criticality Analysis (FMECA)
Reliability
Growth Analysis (RGA)
Logistic
Support Analysis (LSA)
Review TIRs and produce FACARs based on Engineering work
Perform Reliability Modelingusing Reliasoft, MADe Software
Support various program, provide reliability support to Engineering and Logisitcs
Maintain Reliability RAM-C model using modern Database tools, such asMS Access, MS Excel (required) and Python, R, SQL (desired)
Perform reliability assessment of design. Follow/monitor results of vehicle testing.
Investigate and report pattern incidents *Perform corrective action investigations
Conduct Root Cause and Corrective Action process, Lead and Maintain FRACAS
Interface with Reliability data bases and run Reliability models (Reliasoft, etc)
Prepare data for scoring/assessment conferences and upper management presentations
Run Design for Six Sigma and Robust Engineering projects

What You’ll Need:

Ability to Obtain Secret clearance is required.
Experience in reliability/maintainability disciplines is highly desired.
Personal computer skills (competent with MS Office applications, Databases, Data Analysis), desired
Programming Languages - Python, R, SQL, Java, etc.
Experience in report preparation and technical writing beneficial.
Ability to read and interpret technical drawings (blueprints, schematics, hydraulic and pneumatic flows)
Some travel required (minimal).

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Electrical, Mechanical, or Computer science combined with 3+ years of relevant work experience.
Masters degree in Engineering is preferred.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12289
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/11/2021

Sheetmetal Technicians

Description:

PDS is seeking Structural Mechanics for open positions in Bridgeport, West Virginia.

In your role, you will:

Safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.
Troubleshoot, repair, inspect and perform maintenance on customer aircraft
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with aircraft component repair
Comply with environmental health / safety policies / procedures. Participate in 5-S activities. Perform work in a safe and timely manner.
Adhere to Company General Work Requirements (Factory, Shop and / or Hanger positions)

Education and Experience:

You have typically 2 + years structural sheet metal repair / modification experience or substantiated similar experience
You have sheet metal A/C Tech school or equivalent schooling
You have the ability to interpret and work with mechanical engineering drawings
You hold an A or A&P license (REQUIRED)
You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
You have your own basic set of hand tools with the ability to demonstrate Inventory & control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You have the ability to work unscheduled overtime including nonscheduled work days and holidays
You have the ability to work in seasonal/inclement weather outside
You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
You have basic PC skills
You have experience on corporate jet aircraft / commercial aircraft

Job Number: 2010115624
Job Location: Bridgeport, WV
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvH3QAK&URLSource=cjhunter

Satellite Mechanisms Technician

Description:
Chipton-Ross is seeking 13 Satellite Mechanisms Technicians located in El Segundo, CA.

RESPONSIBILITIES:
Works from preliminary and released design drawings, procedures, test specifications, manufacturing, planning, oral and written instructions. Knowledge of electrical principles is required.
� Assists in the fabrication and performance of inspections, manufacturing tests, diagnosis of malfunctions, and preparation of mechanisms for engineering tests. Performs a limited number of tests without direction.
� Operates shop equipment such as mechanical and electronic gauges, sine plates, concentricity instruments, tool makers, microscopes and precision weighing equipment. Sets up and operates precision cleaning equipment.
� Performs most of the bonding operations, thermal processes, precision measurements, in-process tests and data reduction made in the shop.
� Performs work assignments in a clean room environment.
� Performs rework of the same nature and level of difficulty as described.
� Meets necessary certifications as required.
� Performs incidental related duties as assigned or required.

REQUIRED EXPERIENCE:
1 year or less experience doing mechanical or electromechanical work on:
Cars, automotive repair, engines
Remote control cars, planes, drones, gimbals
Military vehicles, aircraft, engines, drones, gimbals, wire harness installation and repair, connector assembly
HVAC installation, wiring, maintenance and repair
Machining, industrial equipment such as air compressors, vacuum pumps, and hydraulic presses
Knowledgeable in using precision measuring devices (i.e. height gages, micrometers, depth gages, and calipers).
* Vision Requirements: Color Vision, Level 2; Visual Acuity, Near 20/20 and Visual Acuity, Far, 20/30

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

Job Number: 188104
Job Location: El Segundo, CA
Rate: $DOE
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Senior Electrical Engineer

Description:
PDS Tech Inc. is seeking a Senior Electrical Engineer, in Denver, CO.

Capitol Wire Diagram Designers:
*Must have Mentor Graphics & Capital Harness Experience
*Electrical Background
*Aerospace/Aircraft Background
* Mentor Graphics/ Capital Logic

PRIMARY RESPONSIBILITIES INCLUDE:

Work with Electrical and Mechanical Engineers to design and document client products while following established design and documentation standards.
Translate concept drawings, wiring diagrams, verbal descriptions, and sketches into detailed electrical and/or models and drawings in support of specific program tasks including electrical bundle routing.
Efforts will include assessment structural, environmental, and manufacturability considerations, including tolerance evaluation to reduce costs and schedule impact for all design efforts, while ensuring compliance and bet practices as well as contractual requirements.
Develop harness bundle assemblies using Siemens NX11 Electrical Harness Module and data / intelligence imported from Siemens Mentor Graphics Capital Logic.
Develop light weight secondary structures and harness support bracket parts that comply with both mechanical and electrical requirements for the specific applications.
Will generate and launch Engineering Change Orders (ECO) and Engineering Change Notifications (ECNs), with associated documentation, into a Configuration Management (CM) system (i.e. Windchill).

EDUCATION

Requires a Bachelors of Science in Engineering or related technical discipline.

Job Number: 2010121785
Job Location: Denver, CO
Duration: 12 months
Input Date: 11/20/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PF1NQAW&URLSource=cjhunter

Senior Manufacturing Engineer - SECRET

Description:
PDS Tech is seeking a Senior Manufacturing Engineer with an Active Secret Clearance.

Actively collecting and screening resumes for upcoming needs, please email gsanchez@pdstech.com or call 314-264-3135 to discuss.

Responsibilities:

The Senior Manufacturing Engineer in the Defense Airframe business line is responsible for delivering manufacturing engineering solutions to the Programs and Operations organizations up to Life Cycle Gate (LCG) 7. ME’s develop these solutions to enable and deliver Zero Defect Manufacturing processes during the New Product Introduction (NPI) phase of the product Life Cycle. ME’s are accountable for defining and delivering robust and capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly.

Responsible for technical support of manufacturing development and integration for New Product Introduction (NPI).
Responsible for the implementation of tooling and or production planning, from original concept through to production. ME’s design these processes with a high degree of process capability utilizing standard Zero Defect Manufacturing (ZDM) tool suite.
ME’s are accountable for product development, first article development, configuration changes, build process definition and implementation.
ME’s deliver measurable, metrics driven results in line with Operational & Program goals.
Maintain positive, team relationships with internal and external customers, as well as co-workers
Continuously improve production processes by implementing Lean initiatives.
Develop technical solutions to complex problems.
Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances.
Exemplifying a safety-first mind-set and ensuring compliance with the Aerospace Health, Safety and Environmental policies and standards.

Required Qualifications:

Bachelor’s Degree in Engineering (Aerospace, Mechanical, Electrical, Chemical)
5 years’ experience in Manufacturing Engineering.
Working knowledge of LEAN processes and practices
Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000
Fluent in English language, both written and spoken
Must be a US Citizen
Possess an active US DOD Secret Clearance

Additional Qualifications:

Demonstrated experience with AS-9145 Zero Defect Manufacturing, or equivalent automotive PPAP experience
Experience with New Product / Process introduction (industrialization) & existing production process improvements
Knowledge of statistics and statistical process control (SPC)
Strong background with Microsoft Office tools, especially Excel

Job Number: 2010121250
Job Location: Garden Grove, CA
Per Diem: Yes
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/04/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PDXtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Production Operator

Description:
Senior Production Operator

Job ID # 2021-12267

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
Read and interpret basic schematics and drawings
Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
Integrate sub-assemblies into final hardware
Perform final assembly of small systems
Perform basic electrical tests
Perform more complex rework and refurbishment of hardware and systems
May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
May conduct manufacturing inspections on processing line in accordance to quality specifications
May be involved in packing, movement and protection of finished product
May disassemble, modify, rework, reassemble, and test experimental or prototyp