Job Search Results

926 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/21 Wednesday 06:12PM Pacific Time by ContractJobHunter. )

Listings 1 - 926

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 05/01/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/14/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/13/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ATE Test Engineer (291)

Description:
This is a full time, 6 month contract, located in Grand Prairie, TX*



We are hiring for an Automated Test Equipment Engineer who will Design/develop/deploy test equipment hardware and software using automated tools such as LabView, LabWindows/CVI and Teststand. Candidate will work with high performance data acquisition and control, in the presence of multi-threaded, multi-protocol military radio and instrumentation communications. Responsibilities will include working on failure mode analysis, timing synchronization, and closed loop feedback as well as validation and calibration sequences.
For this position, typical candidates will have a background using varied BUS and protocols including some combination of: IEEE-488, I2C, SPI, USB, 1553, NTDS, RS-485/422/232, Serial, SNMP, TCP/IP, HTML, and Ethernet.

Daily duties may include working with Spectrum Analyzers, Network/Signal Analyzers, Signal Generators, RF Power Meters and Attenuators/Switches/Couplers, Function/Waveform Generators, Data Acquisition and Control Systems, DMMs, High Voltage P/S, Analog I/O, Digital I/O, RF I/O, National Instruments PXI/VXI, Test Method Development, Test Plan/Procedure Development, Data/File Transfer, Distributed I/O, TE Design for Manufacturability, Schematic Interpretation, RF Equipment Specification Review and Selection, RF Communications, Hardware Driver Development, Software Driver Development
Required:

*4+ years' experience designing test stations using test console software with one or more of the following: Labview, TestStand, or Lab Windows CVI.
*Experience in C software development.
*Requires an Active Secret Clearance, which requires applicants to be US Citizens.
*BSEE or equivalent degree



Pluses:
*Developing ATEs for military electronics
*Familiar with test stations such as an ITA (interface test adapter), test console ( drivers, interaction of test equipment software with UUT (unit under test)
 
Job Number: 291
Job Location: Grand Prairie, TX
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Fire Control Systems Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Fire Control Systems Engineer
(US Citizenship Required*)
Pittsfield, MA
2019-8176

Responsibilities:
• Participate in requirements analysis, definition, and management, functional & performance analysis, system design, trade studies, systems integration and test (verification), validation and interface definition studies of system elements with minimal supervision of the lead systems engineer
• Perform technical planning; analyze cost, risk, supportability, & effectiveness, for subsystems & system elements
• Analyze customer requirements, develop system requirements and define allocations to lower levels (subsystem, elements and components)
• Perform detailed technical analyses for a system, subsystem or system elements
• Develop and evaluate systems, networks and information systems to ensure designs meet applicable governmental security specifications
• May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
• May develop system security documentation on both new and fielded information systems
• Contribute to detailed technical analyses at the system of system (SOS) level
• Synthesize solutions to meet customer expectations and technical performance while staying within schedule and cost constraints
• Lead Modeling and Simulation activities
• Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
• Support generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycle
• Research, design, and develop systems, in conjunction with software and hardware product development, applying principles and techniques of systems engineering, modeling and simulation and analysis
• Lead and/or direct lower level employees; lead technical tasks for small teams or projects
• Begin to provide engineering support to proposals
• Participate in or lead SOW generation for subcontracts
• Exercise latitude in determining technical objectives of assignments
• Guide the successful completion of major programs and projects
• Plan and execute significant project tasks for activities described above
• Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
• Design a complete and complex framework, system or product
• Determine methods and procedures on new assignments and may coordinate activities of other personnel (Team Lead)
• Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues in creative and effective ways
• Identifies, analyzes and resolves system design weaknesses
• Frequent contact with managers, project teams, and external customers and vendors; occasionally with Business Development
• Travel may be required
• Resolve diverse, complex problems which using ingenuity and creativity
• Contribute to the achievement of business objectives and development of new theories and method

Qualifications:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Strong use and understanding of systems engineering concepts, principles, and theories
• Strong knowledge of other related disciplines
• Strong proficiency with requirements management & system modeling tools
• Recognizes various architectural patterns and applies them appropriately
• Strong proficiency in Microsoft Office applications
• Strong written and verbal communications skills
• Ability to get buy-in on concepts and ideas
• Creative thinker, multi-tasker
• Effective in communicating issues, impacts, and corrective actions
• Strong ability to clearly report information relevant to sound systems engineering design
• Strong understanding of basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls
• Agile experience preferred.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in systems engineering, a related specialized area or field is required (or equivalent experience) 8+ years of relevant experience; or Master's degree 6+ years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8176
Job Location: Pittsfield, MA
Rate: Based on experience
Input Date: 03/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aerodynamics Design Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Design Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Design Engineer will be responsible for the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.
Perform detailed aerodynamic design and analysis in areas of aircraft shape, configuration, performance, and handling qualities.
Optimize and tune aircraft shape using CFD and other commercial or in-house advanced modeling tools including geometry modeling.
Predict aircraft aerodynamic performance using classical analytical techniques as well as advanced simulation tools.
Provide guidance in the design of airframe and control surface. components which meet design and certification requirements
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools.
Provide subject-matter expert level guidance on both practical and theoretical aerodynamic aircraft design.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
Minimum of five years overall technical experience in aerodynamics, CFD and aerodynamic design of air vehicles.
Familiarity with computational geometry and 3D geometry modeling.
Significant experience in aerodynamic design, from concept through certification, in a collaborative multi-discipline team environment.
Experience in the development of fighter, supersonic, and/or business aircraft. Experience with advance design tools such as MDO frameworks.
Familiarity with HPC platforms and NASA CFD codes.
Advanced skills in computational geometry and familiarity with Dassault Systmes CATIA software suite.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, or similarly related field, with an advanced degree in a highly relevant technical specialty strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177351
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/01/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Embedded Software Engineer -Simulations (73)

Description:
*This is a full time, 1 year contract position, located on site in Fort Worth*



We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft or missile simulation software.



Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, and verification/validation.



Required:

*9+ years’ experience developing, integrating and testing simulation software in a high-level language.

*Embedded RTOS development experience

*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation

*Active Secret Clearance, with an investigation in last 5 years.

*Engineering Degree



Pluses:

*Experience in Programming in C++ and/or Matlab and Fortran

*Good mathematics including curve fitting and regression, linear algebra, algorithms.

*Experience with DOFs and missile applications.

*Familiar with Kalman Filters
 
Job Number: 73
Job Location: Fort Worth, TX
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/22/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Altium PCB/PWB Wiring Board Design Engineer -RF (191)

Description:
*This is a full time, 6 month contract (contract to hire is possible), located on site only in Lansdale, PA.



We are recruiting for a PWB/PCB wiring designer/engineer who has current experience using Altium PCB design software (version 14-16, 16 is preferred).



Candidate will be creating accurate 3D models of RF (radio frequency), multi-layer PCB board assemblies, wire routing and PCB/PWB layouts. AutoCAD 12 will be utilized to document the boards upon completion.



Contractors will generate schematics, creating preliminary parts placement, eventually leading to full use of the Altium design tool.



Required:
*1-2 years’ CURRENT experience engineering/designing PCB/PWB using Altium PCB software.
*Experience in documentation, schematics and drawings, BOMs.
*Per diem split is available for candidates residing out of the area.

*No initial relocation assistance (of any kind) is available for this position
*2 year degree is highly preferred



Preferred:

*High Frequency RF board design (and multi layer) experience
*Understanding of IPC-2221 standards.
*Schematic Capture Concept HDL knowledge
 
Job Number: 191
Job Location: Lansdale, PA
Input Date: 02/28/2019
Last Updated: 03/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Analyst-SAP TX

Description:
164454
1372-1 Applications Analyst-SAP
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/18/2019
End Date: 5/21/2020

Job Description:
This position will support Global Logistics (GL) working with management to develop automated key performance indicators utilizing SAP, HANA, Tableau and other systems both inside and outside of client. This position will lead the development and enhancement of a GL dashboard by compiling and prioritizing requirements, creating functional specifications and obtaining approvals from management and Aero team. This position will work with the various GL groups, including by not limited to External Supply Chain Integration, Core Traffic, Transportation Management Systems and Total Chemical Management to identify and prioritize system driven improvements and work with management and the One Aero team to establish the return on investment to determine which projects can be worked and when they can be completed. This position will be the SCM POC for all GL metrics. This position will require you to set up meetings via SKYPE and administer and lead meetings with upper management. This position will require presentations to leadership.

Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $72.00 Hourly

Experience
Software Skills MS Office - Expert Level No 6
Software Skills SAP No 3
Technical Skills Communications No 2
Technical Skills Current Database Technology No 1
Technical Skills Database Administration No 4
Technical Skills Database management No 5
 
Job Number: JE-1372-1
Job Location: Fort Worth, TX
Rate: 72/hr max
Per Diem: no
Duration: 15 months
Input Date: 03/19/2019
Last Updated: 04/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automated Test Engineer (ATE)/ TestStand (370)

Description:
*This is a full time, 9 month contract, located on site only in Orlando*



We are searching for an electronics Automated Test Engineer (ATE) who will be using C programming, TestStand and LabWindows/CVI, to develop, design, test, and especially troubleshoot, debug and integrate DoD/military/defense systems hardware.



Candidate will be responsible for developing all verification and validation documentation necessary to certify the equipment for production use.



Required:

*5 years' experience in RF Engineering, Automated Test Engineering (ATE), using automated & manual tools, including TestStand, LabWindows/CVI, or Labview

*In lieu of above software requirement, C+ development from test requirements [may be substituted] for electro-optical and electro-mechanical systems for acceptance testing by test operators.

*BSEE or equivalent degree

*Active Secret [or Interim] Clearance

*Per diem split is available for out of town contractors

Pluses:

*C programming experience

*Familiar with JTAG using Acculogic

*Labview experience
*Experience with network and spectrum analyzers
 
Job Number: 370
Job Location: Orlando, FL
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Autonomous Vehicle Software Developer, C++ (535)

Description:
*This is a full time 1 year contract position, located in Littleton, CO*



We are hiring for a Software Engineer who will be full life cycle developing of systems for land based military vehicles. Daily work will involve requirements gathering, documenting, testing, and debugging/ troubleshooting software.



Required:
*5 years’ experience in developing autonomous vehicle applications/modules using Object Oriented software.

*Strong C++ development in a Linux UNIX environment; able to configure LINUX for automated system start-up, file system integrity, writing project specific configuration scripts
*Skilled in SW Arch, SLAM Perception and OD/OA
*Knowledge of parsing legacy code
*BS Degree in a related engineering discipline (i.e. robotics, AI, mathematics, physics, etc.)
 
Job Number: 535
Job Location: Littleton, CO
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Integration Engineer

Description:
Avionics Systems Integration Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; signal conditioning; data acquisition; actuator control; RF communication; wire harnesses; vehicle guidance, navigation, control; fault tolerance; ground-support electronics hardware and software; and integrated vehicle health monitoring. The ideal candidate will have at least 2 years of experience working with avionics and electrical systems in the aerospace or related fields. A college graduate with related project experience and a passion for aerospace will be considered. We are looking for a generalist who will contribute to several roles in a fast paced environment.

Your Mission
• Design, Integration, and testing of avionics and aircraft electrical systems
• Develop vehicle, system, and component requirements for design, procurement, and test
• Evaluate and select COTS avionics subsystems.
• Work with hardware engineers and subcontractors to define requirements and interfaces for custom avionics hardware
• Create vehicle level schematics
• Plan, execute, and report on vehicle ground and flight testing
• Troubleshoot vehicle systems using schematics, multi-meters, oscilloscopes, bus analyzers, etc.

What you bring
• Experience with digital communication protocols such as RS232, RS422, RS485, Ethernet, MIL-STD-1553, CAN
• Hands-on electrical and/or avionics experience with aerospace or related systems
• Strong understanding of electrical engineering fundamentals
• Printed circuit board design experience is a plus
• Experience with analog and digital circuit design is a plus
• Experience with PCB design, FPGA, microcontrollers, and real-time systems is a plus
• 2 or more years of relevant integration and testing experience in aerospace or similar field
• New college graduates with relevant course and project work will be considered
• Experience with embedded system hardware and software
• Strong troubleshooting, organizational, and written communication skills

The Structures Company is an AA/EOE.
 
Job Number: 277
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Test Bench Developer

Description:
Currently seeking an Avionics Test Bench Developer in the California area. The ideal candidate will possess 5 years as a Avionics Test Bench Developer with strong LabVIEW developments skills.


Responsibilities of the Avionics Test Bench Developer:
You will be responsible for developing Hardware-in-the-Loop test benches. These benches will be used for hardware and software testing of Avionics components.
Develop several test benches used for hardware-in-the-loop testing of Avionics components.
Produce test bench schematics
Produce LabVIEW code
Deliverable: Schematics in Visio. LabVIEW code to operate test bench


Requirements of the Avionics Test Bench Developer:
Strong LabVIEW development skills
National Instruments hardware experience.
Experience producing test bench schematics
Experience with NI Veristand a plus.
Educational Requirements for Avionics Test Bench Developer:
Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 275
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 02/13/2019
Last Updated: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Avionics Test Engineer

Description:
We are seeking a Test Conductor / Test Engineer for our Avionics System Integration Rig (ASIR). The test rig is a static test bench for all of the Avionics Systems on the aircraft with a simulation host computer to stimulate the systems.  Candidates should have experience and be familiar with how to conduct systems testing on a test bench or static simulator.

This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.  Test Cards will be created using in-house developed tools however general experience with test card creation is required.  Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

The primary work location will be in Seattle, WA, USA. Business trips to required sites may be requested, including Nagoya and Moses Lake where engineering tasks (Nagoya) and intensive flight tests (Moses Lake) are carried out.

Scope of Work:
  • Development and test of Engineering Test Procedures (Test Cards) using in house tools.
  • Creation of Test Reports following the tests to document the results.
  • Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.
  • Support the Configuration Management of the Test Rig
  • Facilities planning,
  • Creation and carrying out of Rig Maintenance Procedures,
  • Test Video Recording & Equipment management,
  • Software Loading following provided instructions.

 
 
Job Number: 1910097155
Job Location: Seattle, WA
Duration: 12 months
Input Date: 01/14/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r7MpQAI&URLSource=cjhunter

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance (US Citizens Only!) (175)

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*

We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.

All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared

Required
*4-10 years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Maintenance Technician

Description:
CNC Maintenance Electronics Technician

JOB FUNCTION
CNC Maintenance Electronics Technician works with all elements involved in maintaining CNC machines to OEM standards. This involves overseeing the health of all CNC machines and participating in TPM events. Provide detailed reports on all work orders.

JOB RESPONSIBILITIES

•Perform PM’s and Ball Bar tests per schedule.
•Responsible to maintain all systems on CNC machines
•Troubleshoot and maintain Chiller systems, A/C Systems and Hydraulic systems
•Knowledge of Renishaw Laser Compensation System
•Use machine tool manuals, technical documents, along with internal and vendor resources to research machine issues.
•Square up and realign 5 axis CNC Machines
•Provide Reports and documentation of repairs
•Research problems with machine manufacturer as needed
•Work based on a sense of urgency with machine down conditions.
•Write or modify existing PLC software code as needed



REQUIRED SKILLS

•Ability to read parts manuals, electrical and machine schematics, assembly instructions and troubleshooting guides
•Familiarity with Fanuc 30i, 15MB, Heidenhain iTNC 530, and Siemens 840D Controls
•Knowledge of and experience with electrical test equipment, electrical, hydraulic and mechanical systems.

EXPERIENCE
•10+ years’ experience in a manufacturing/maintenance environment

EDUCATION
Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered.

• Associate degree in Electronics, Technical School or Certification or Military training in Electronics; Education may be considered in lieu of experience for this role.
•Must have excellent verbal and written skills
 
Job Location: Irvine, CA
Rate: $35-$38
Start Date: ASAP
Input Date: 03/21/2019
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10333 RICHMOND AVE STE 445
City, State: HOUSTON, TX 77042
Phone: 713/636-2777
Fax Phone: 713/636-2523
Website: www.morson.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer - Municipal EIT (284)

Description:
*This is a full time salaried position, located in Paterson, NJ.*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing roads, storm water management and runoff, buildings, city infrastructure, etc. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:
*3 years’ experience in municipal and Civil engineering including road, stormwater runoff/drainage, erosion control, sedimentation studies, culverts, small bridges or similar design and engineering projects.

*Must reside within 1hr of Paterson, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT or PE Certification



Pluses:

*Some knowledge of AutoCAD or Civil 3D
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience



Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 284
Job Location: Paterson, NJ
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer, EIT Municipal Projects (050)

Description:
*This is a full time salaried position, located in Mount Holly, NJ.*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing roads, storm water management and runoff, buildings, city infrastructure, etc. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:
*3 years’ experience in municipal and Civil engineering including road, stormwater runoff/drainage, erosion control, sedimentation studies, culverts, small bridges or similar design and engineering projects.

*Strong background in not just technical and design side (50%), but in daily working with clients (50%), mostly within 30 miles of office, in the field
*Must reside within 1hr of Paterson, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT or PE Certification



Pluses:
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience

Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 50
Job Location: Mount Holly, NJ
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Checker

Description:
Unique Skills:
Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5. Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros). Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-327
Job Location: Savannah, GA
Rate: $46 - $50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/25/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Quality Engineer

Description:
Location: Savannah, GA
Rate: $46.20/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5.
- Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros).
- Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10516
Job Location: Savannah, GA
Rate: $46.20/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Analyst 3 CA

Description:
Computer Systems Analyst 3 (Job Number: 19003514)

# of Openings: 1

Shift: 1st

Target Start Date: Mar 11, 2019

Target End Date: Mar 6, 2020

Rate: $52-$57/hour

Location: Redondo Beach, CA

Duration: 12 Months

Shift: 1st Shift - 9/80

Clearance: Not Required

Essential Functions:

•Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
•Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities
•Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
•Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
•Reviews status of projects and budgets; manages schedules and prepares status reports.
•Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom
•Works independently with little oversight.
•Candidate needs to cooperate with teammates on best practices and possible re-use of applications.


Basic Qualifications:

•A minimum education of a Bachelor's Degree in s STEM discipline (Science, Technology, Engineering or Mathematics) A minimum of 5 years’ experience with a Bachelor's Degree (3 years with a Master's degree and 0 with a PhD.) in C#, MS Visual Studio, ASP.NET MVC, JavaScript , AJAX, XML, Web Services and related technologies, T-SQL and DTS packages for MS SQL Server, MS VBA, SSRS.
•Working knowledge of Python and ShinyR. Experienced in machine learning, advanced analytics, and data visualization.
•Candidate must be able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
•Candidate must be able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
•Candidate must be able to juggle multiple assignments and manage changing priorities.

Preferred Qualifications:

•A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Strong understanding of product quality and statistical process control.
•2-3 years of experience working with statistical process control.
•Strong project management and communications skills are highly desired.
•Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
•Strong project management and communications skills are highly desired
 
Job Number: MB-1727ATO
Job Location: Redondo Beach, CA
Rate: 57/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/08/2019
Last Updated: 04/30/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Analyst Level 3 - Secret Clearance

Description:
Position Description:
Primary responsibility is to perform tasks related to Assessment & Authorization (A&A) and cybersecurity under the Defense Health Agency (DHA) to obtain and maintain Authorizations to Operate (Client) for assigned DoD medical systems (i.e., applications, networks, devices). This position will be a part of a team developing recommended courses of action needed to transition current policies and procedures to the DHA RMF-approved processes.

Primary Responsibilities:
• Provide solutions to complex problems that require the regular use of expertise and creativity. Problems are broadly defined and solutions require the continuation of specialized theories and knowledge.
• Serve as Subject Matter Expert (SME) on one or more technologies/skills related to A&A activities.
• Conduct risk and vulnerability assessments of information systems to identify vulnerabilities, risks, and protection needs
• Actively participate in working group meetings to identify, plan, and execute strategies in response to emerging cybersecurity/RMF policies
• Attend and participate in regular A&A status meetings to facilitate progress and address potential issues of RMF system efforts
• Maintain awareness and knowledge of evolving security and risk management standards and communicate and apply relevant changes to existing processes

Day-to-day tasks are contingent on related experience and assigned role, and may include the following:
• Develop, update, and/or review RMF documentation to include Security Plans, Implementation Plans, Plans of Action and Milestones (POA&Ms), and Risk Assessment Reports
• Assess system compliance against NIST, DoD, and DHA security requirements to include the NIST 800-53 controls and DISA Security Technical Implementation Guides (STIGs) and Security Requirements Guides (SRGs)
• Produce evidence as necessary to support compliance status of NIST, DoD, and DHA security requirements
• Work with system administrators, engineers, and developers to create or update system/site policies, procedures, and process guides
• Coordinate with other system SMEs to identify and develop authorization boundary diagrams, architecture diagrams, and hardware and software inventories
• Conduct regular vulnerability scans of information systems and assist in remediation tasks
• Submit weekly reports to DHA leadership regarding system/program status

Minimum Qualifications:
• BS degree and six (6) years of experience with Cybersecurity / Information Technology, or twelve (12) years of hands-on experience with Cybersecurity / Information Technology and demonstrated efficiency and experience in one or more of the following areas:
o RMF package development, including POA&Ms (mitigation statements), Security Plans, Risk Assessments, system/site policies, procedures, and processes, architecture diagrams, and hardware and software inventories
o Assured Compliance Assessment Solution (ACAS) and Host Based Security System (HBSS)
o DISA STIGs/SRGs validation
o NIST 800-53 control validation
o Continuous Monitoring and Risk Scoring (CMRS)
o RMF policy development and strategy implementation
o BIOMED experience (former technician, physician, engineer, etc.) installing, testing, using, maintaining, designing, and/or modifying medical equipment and applications
• Demonstrated experience with Risk Management Framework (experience under DHA a plus)
• Excellent customer service and organization skills
• Excellent oral and written communication skills
• Familiarity with NIST publications
• Active DoD Secret security clearance
• DoD 8570-compliant (CompTIA Security+ certified)
• Ability to obtain OS certification or complete approved related training within 180 days of hire
• Ability to travel up to 25-35%

**Note: Position is remote-based; however, applicant must be located within the San Diego, CA or the Sacramento, CA region and able to attend local meetings/events on site as needed.

Additional Qualifications a Plus:
• Experience with eMASS
• Knowledge in one or more of the following technologies:
o Medical devices
o Windows
o Linux/Unix
o Network Devices
o Databases – MS SQL, Oracle
o VMWare – Virtualization

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-08828
Job Location: Sacramento, CA
Rate: 40.00
Per Diem: NO
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 03/10/2019
Firm Name: NESCO RESOURCE
Attention: Peter Voigt
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Analyst

Description:
Data Analyst

Windsor Locks, CT
$52.96/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
Minimum of 5-7 years Data Analytics Activities: Mining Data, Organizing Data, Merging Data, Reporting data, Analyzing Data

3 out of 5 of the software skills below needed:
Bachelors Degree required
Microsoft Access
Data Base Development
SQL programming
Business Objects Reporting
Visual Basic programming
SAP Extracts

Full Time 40 hours required, some overtime could be possible.
 
Job Number: 10326
Job Location: Windsor Locks, CT
Rate: 52.96
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Analyst

Description:
Data Analyst

Windsor Locks, CT
$52.96/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
Minimum of 5-7 years Data Analytics Activities: Mining Data, Organizing Data, Merging Data, Reporting data, Analyzing Data

3 out of 5 of the software skills below needed:
Bachelors Degree required
Microsoft Access
Data Base Development
SQL programming
Business Objects Reporting
Visual Basic programming
SAP Extracts

Full Time 40 hours required, some overtime could be possible.
 
Job Number: 10326
Job Location: Windsor Locks, CT
Rate: 52.96
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/23/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 35657
Job Location: Oklahoma City, OK
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 03/11/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angie Leahey
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter / NX / BS required CA

Description:
165260
Request number: 5912
Job title: Design Drafter
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 50
6 months +

Function:
Mechanical Design Engineer
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering
 
Job Number: MB-5912
Job Location: Torrance, CA
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/27/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements / NX Mcad Solidworks CREO NY

Description:
Request number: 5731
Job title: Design Engineer
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 55
Start Date: 12/10/2018
Tentative End Date: 03/11/2019

Job Description
The Design Engineering Associate will work closely with other engineers, collectively developing thoughts and sketches into conceptual layouts, solid models, drawings, and schematics in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.

Ideally experience and in-depth knowledge in utilization of Siemens NX Mcad design software is strongly desirable. Additionally experience using 3D Mcad software package ie: Solidworks or PTC Creo is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.

It's desirable for the candidate to have experience in customizing their Mcad environment in order to take advantage of the Mcad functionality promoting cad and design efficiency.


Other Requirements
Thermal Analyst for space hardware with 5+ years experience.
• This role will require a highly motivated individual with the ability to multi-task among several programs with competing demands
• Experience with thermal analysis techniques is required
• Preferred software experience with Siemens NX, ANSYS, and Sinda/G
• Experience with Thermal Desktop is desired, but not required
• Experience with structural analysis is also desired, but not required

Request status: Open
 
Job Number: MB-5731
Job Location: East Aurora, NY
Rate: 55/hr max
Per Diem: no
Duration: 3 months +
Input Date: 03/13/2019
Last Updated: 03/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 04/26/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/06/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DevOps Engineer

Description:
What You’ll Do

Create, maintain, and extend build infrastructure including automated builds, database migrations, and integration/regression testing.
Collaborate with teams to design and implement pipeline stages that meet business objectives.
Provide software configuration management. Troubleshoot and resolve issues within the pipeline stages.
Building capabilities that will ensure quality and facilitate the rapid, reliable deployment of applications.
Collaborate with team members and business users to clarify requirements and confirm design/implementation.
Foster a collaborative and team-oriented environment
Provide ongoing maintenance, support and enhancements in existing systems and platforms.
Maintain a regular and predictable work schedule.
Establish and maintain effective working relationships within the department, the SBU/SSU and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Perform other duties as necessary.
What You’ll Need

BS in Information Technology or a related technical field plus 5 or more years related experience.
Each higher-level related degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Two years of related experience may be substituted for each year of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
Strong analytical, problem solving, and collaborative skills.
Interest in learning new skills and keeping pace with changing technologies.
A passion for DevOps tools and culture along with experience in DevOps/CI/CD processes.
Experience developing tools and/or automation frameworks.
Experience in the following:
Experience with source control automation
Git source control and branching strategies.
Scripting specifically around configuration and automation with PowerShell or equivalent languages.
Building Continuous Integration pipelines.
Nice To Haves:
Experience with any of the following technologies:
Cloud management within Azure or AWS
Containerization with Docker or Kubernetes.
Service-oriented or microservices architecture and distributed application design principles
System Administration and/or Software Developer experience
Atlassian Jira, Bitbucket, Confluence, and/or Crucible
Team Foundation Services/Azure DevOps
NuGet and/or Maven Package Management
 
Job Number: 47418
Job Location: Lafayette, CO
Rate: 49.28
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/05/2019
Last Updated: 03/15/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:
Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes. Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software. Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets. The selected candidate will represent client and DoD customers in outside discussions and technical forums. This position will require some travel and require a security clearance.

Required Skills & Experience
A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required. The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.
Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.
The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.
Experience in deriving verification test benches from detailed specifications is required.
Familiarity with at least one (1) commercial scripting programming language such as PERL or Python is required.

Desired Skills and Experience
Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling
Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers
Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-09589
Job Location: Dayton, OH
Rate: OPEN
Per Diem: SPLIT
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 03/09/2019
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 03/25/2019
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Document Management Architect

Description:
Document Management Architect

Windsor Locks, CT
$90.75/hr
6 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
UTAS utilizes Document Management tools in a global environment. Will need to support the current UTAS Communications and Collaboration collection of document management applications. Specify design and implement Document Management software and its integration with other applications. Participate in UTAS Collaboration Tools strategic projects. Select, blueprint, gather requirements, design, and roll out solutions to end users. Ensure our systems stay compliant with UTC policies, US and International laws. The Document Management Architect is also responsible for ensuring high levels of system availability through monitoring and in-depth testing. Execute IT projects that support UTC Aerospace Systems business objectives. The projects can include developing custom applications or implementing software solutions purchased from a third party Application Service Providers. Projects typically involve working with UTC divisions.

1. Build and configure Document Management environments.
2. Support and maintain existing installations of Documentum.
3. Perform configuration changes as needed on production environment which are submitted through Help Desk tickets and service requests.
4. Review and fix Documentum security as needed.
5. Ensure knowledge transfer of best practices.
6. Provide ongoing operation and maintenance activities including periodic software upgrades.
7. Ensure technical architecture designs are compatible with the department's current / future standards and are supportable.
8. Assess and cultivate long-term strategic goals for Documentum development in conjunction with end users, managers, clients, and other stakeholders.
9. Direct, organize, and lead projects in the implementation and use of Documentum software tools and systems.
10. Design, test, and document all modification of the Documentum environment.
11. Analyze user requirements and, based on findings, design functional specifications for Documentum.
12. Conduct job duties and responsibilities according to the organization’s business systems development methodology and/or its Systems Development Life Cycle (SDLC) methodology. Also, familiar with the Agile methodology.
13. Assist end-user training and training materials; provide technical support as necessary.
14. Troubleshoot tools, systems, and software; performance-tune these applications as necessary.
15. Remain abreast of trends in relevant software and technologies. As required, lead efforts to analyze and recommend solutions.

Experience/Skills:
1. Experience / knowledge the following technologies:
• Documentum 7.x, including DA, Webtop, xPlore, API/DQL queries
• D2 4.7 Development & Configuration, C2, and D2
• Support of Captiva 7.5 Modules and Customization
• Microsoft .NET Software Development
• Linux Server Administration
• C#, VB .NET
• Windows Server
• Microsoft SQL Server Basics
• Oracle Basics
2. Minimum of 7 - 10 years direct work experience.
3. Strong ability to install and configure a Documentum.
4. Strong understanding of Documentum: theories, principles, and practices.
5. Exceptional analytical, conceptual, and problem-solving abilities.
6. Strong understanding of the organization’s goals and objectives.
7. Strong written and oral communication skills.
8. Strong presentation and interpersonal skills.
9. Able to prioritize and execute tasks in a high-pressure environment.
10. Experience working in a team-oriented, collaborative environment.
11. Experience will be acceptable in lieu degree.
 
Job Number: 10309
Job Location: Windsor Locks, CT
Rate: 90.75
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/17/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Development Engineer

Description:
One of the country's leading heavy trucking manufacturers is looking for an Electrical Development Engineer to support the body controller team with answering/solving critical current product issues and with design and testing of new software functionalities.

Essential Duties and Responsibilities
• Investigate software and electronic issues by going through a thorough troubleshooting process. Report issues to supplier or internal stakeholders and follow through resolution
• Answer shopcall issues to support plant builds
• Answer custom work orders (CWO) requests
• Release software parameters
• Author ECU software specifications in internal documentation tools
• Support the team during the ECU communication and interface update phase and for the ECU extract
• Perform component test bench verification tasks for software functionalities to confirm that they were implemented to specifications

Required background experience and skills
• BS degree in electrical or computer engineering (MS degree preferred).
• 2+ years of previous work experience with electronic components and software development
• Experience with electronic component and software testing.
• Strong troubleshooting and analytical mindset
• Good oral, presentation, and written communication skills.
• Customer Service-supportive mindset
• Proficient PC skills including Office suite

• Automotive or Truck Electronic and software development experience preferred
• Programming languages:
o Matlab/Simulink required
o Python/C preferred
• Experience with CAN Network communication and CAN tools (CANalyzers/etc.)

Top 3 MUST-HAVE Hard Skills
• Testing of electronic and software feature requirements on bench equipment
• Troubleshooting mindset
• Experience in Software Development for automotive electronic features



Additional Information:

Hours: Mon - Fri 8am - 5pm
Duration: 18 months - possibility for 24 months
Location: Portland, OR (Swan Island)
 
Job Number: 5665
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 18+ months
Start Date: ASAP
Input Date: 03/12/2019
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer II, III, IV, & V - (MO)

Description:
Active Secret Clearance Required To Start.

We are seeking highly motivated engineers with design and analysis experience to support Vehicle Management System (VMS) development, integration and test, including Electronic System Integration Laboratory (ESIL) development and integration, and requirements validation/verification efforts, and ultimately flight testing. Personnel are needed to support the Navy MQ-25 carrier based autonomous tanker program as well as numerous proprietary efforts. Work will be performed at the St. Louis area campus locations supporting Phantom Works, Strike, Surveillance and Mobility, and other business units. Candidates will support or potentially lead development and integration activities for various fixed wing, weapons and proprietary programs.

POSITION RESPONSIBILITIES
• Understand airplane input signal processing, redundancy management, system monitoring and control
• Flight Control Components hardware (HW) and software (SW) system-level verification and validation testing including hardware design, integration and qualification
• Develop requirements for the Vehicle Management System (VMS) test assets
• Monitor supplier performance to ensure system integration and compliance with requirements
• Perform hardware root-cause analysis and support overall system integration anomalies
• Work with a variety of airplane analog sensors (Linear Variable Differential Transformers (LVDT), pressure sensors, proximity sensors, etc.)

Basic/Required Qualifications:
• Experience with avionics integration and lab environments

Preferred Qualifications (Desired Skills/Experience):
• Strong knowledge of VMS design activities (HW/SW design, integration, modeling, and test procedure development
• Experience in analog and digital circuit design and analysis
• Experience with Microsoft Visio, Clearcase, ClearQuest, C++, C#, Visual Studio, Python

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 04/05/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (Everett & Seattle)

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 04/05/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Military Wire Harness (158)

Description:
*This is a full time, 8 month contract, located in Palmdale, CA*



We are hiring for an Electrical Design Engineer specialized in designing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



Required:
*9 years’ experience in electrical military aircraft design 3D software.

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Experience reading and creating electrical drawing schematics for wire harness assemblies
*Per diem split is available for those travelling for this position
*Current Active Secret Clearance (and recently investigated within the last 5 years)
*Ability to work 2nd and weekend shifts if needed (in addition to 1st shift)



Plus:

*Catia V5 knowledge
 
Job Number: 158
Job Location: Palmdale, CA
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6+ months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Required:
Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

Task assignments:
- Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
- Work with a supplier to select new IDGs that fit the new engine capabilities
- Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
- Assess impacts to wires, and subsystem power feeders
- Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
- Develop Power design reports and system design budget

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 12/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Vehicle Mechatronics

Description:
One of the world's leading heavy truck manufacturers is looking for an Electrical Engineer to join their team!



Purpose:

Apply engineering principles to improve electronic components.
This includes the development of concepts to improve operation of components and the analysis of associated technical problems.
Manage considerable complexity while working with minimum of supervision.


Essential Duties and Responsibilities:

Creates and updates project plans.
Plan, coordinate, and supervise the testing, and documentation of the results for new and existing components and trucks in all product lines. Develop and document application- specific test plans.
Creates, modifies, and uses analytical tools and experimental methods.
Orders experimental hardware for evaluation.
Provides test instructions to laboratory technicians and advises laboratory personnel of instrumentation needs.
Reviews and analyzes experimental and analytical results.
Composes monthly progress reports and specifications and/or contract proposals.
Presents periodic oral project reviews.
Documents completed projects in written reports.
Maintains technical expertise in areas of specialization by reading literature, joining societies, attending conferences, writing technical papers, etc.
Trains other engineers in areas of expertise and specialization.
Participates in technical and industry associations.
Manages projects conducted internally and at outside companies.
Maintains clean and safe work area.
Maintains files of correspondence, technical information, and experimental or analytical results.
Exchanges information with colleagues.
Required background experience and skills:

MS degree or BS degree in electrical, computer, or mechanical engineering.
2-4 years of previous work experience with electronic components or Ph.D. in electrical engineering.
Good oral, presentation, and written communication skills.
Knowledge of the basic principles of combustion engines.
Proficient PC skills including word processing and spreadsheet software.
Experience with hydraulic, pneumatic, and mechanical systems.
Familiarity with electronic component and software testing.
Experience with instrumentation for making electrical, mechanical, thermodynamic, noise, and emissions measurements.
Knowledge of engine controls, dynamics, vibration, and acoustics.
Interpersonal skills.
Analytical skills.
Preferred but not required:

Automotive Industry Experience
Top must haves:

2+ years of engineering experience
Completed education in electrical, computer, or mechanical engineering
Additional Information:

Location: Portland
Duration: 2 year contract
 
Job Number: 5662
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 03/11/2019
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education/experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ESDE_OK
Job Location: Oklahoma City, OK, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic/Electrical Design & Analysis Engineer III - (Oklahoma City, OK)

Description:
Several openings in Oklahoma City.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 04/05/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

Description:
Electronics Design and Analysis Engr 5- PCB Designer

Location: El Segundo, CA
Duration: 12+ Months

Job Description:
Mentor Expedition Printed Circuit Board (PCB) Designer
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
Ensure that all requirements for manufacturing and assembly are met.
Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.

Skill Code: 624-Electronic Packaging Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 01/02/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer / Scientist 5

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Electrophysics Engineer / Scientist 5
(U.S. Citizenship Required*)
Huntington Beach, CA
2019-8131

Responsibilities:
• A Principal RF Communication Systems Engineer is needed for several Phantom Works programs.
• Travel up to 10% of the time

Qualification:
• Preferred – active Secret clearance.
• 20+ years of experience designing and implementing advanced wireless communication systems and waveforms.
• Deep understanding of the communications theory backed by relevant education and/or specialization training.
• Familiarity with detailed RF link budgeting including usage of modern link-budgeting tools and channel models.
• Experience designing, analyzing, prototyping and testing modern RF front-ends ranging from VHF to mmWave – including modern apertures, up/down conversion, filtering, amplification and signal conditioning.
• Demonstrated experience designing signal processing algorithms of modern communication waveforms including advanced signal processing techniques (eg, parasitic signal cancelation, MIMO processing, diversity combining).
• Mastery of signal processing development tools including MATLAB and Simulink.
• Hand-on system integration, prototyping, and troubleshooting skills – including lab and field activities.
• Familiar with the DoD system engineering processes, practices, product development and acquisition lifecycle.
• Proven successful proposal writing skills.
Preferred:
• Understands design specifics of modern military waveforms.
• Familiar with AJ, LPI/LPD and SIGINT aspects of the waveform design.
• Experience implementing waveforms on the modern hardware including FPGAs, DSPs, SoCs and RFoCs.
• Ability to prototype software using modern algorithmic and scripting languages (C, C++, Python).
• Familiarity with design principles of modern wireless datalink and networking layers.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 14+ years' experience, Master's with 12+ years' experience or PhD with 9+ years' experience.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8131
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Engineer / Secret Cleared (288)

Description:
*This is a full time, 9 month contract position, located on site only, in Lansdale, PA*

We are hiring for a RF/Electrical Test Engineer who will be fully developing test procedures that will integrate acceptance testing of electronic assemblies for Government electronic warfare systems.

Required:
*5 years’ experience in developing test procedures and strategies utilizing physical hardware involving 3 or more of the following: Spectrum or Network analyzers, Signal Generators, RF Power Meters/Attenuators/Switches/Couplers, Function/Waveform Generators, Data Acquisition and Control Systems, DMMs, High Voltage P/Ss, Analog/digital I/Os, PNAs or ENAs.
*Experience in creating and modifying acceptance test procedures using ASP.NET (test executive)
*Currently Active or Interim Secret Clearance (Requires US Citizenship).
*BSEE, Computer Engineering, or equivalent degree

Pluses:
*Knowledge of Test Method Development, Test Plan/Procedure/Requirements Development, Data/File Transfer, Schematic Interpretation, Hardware Driver Development, Software Driver Development
 
Job Number: 288
Job Location: Lansdale, PA
Input Date: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Engineer - Guidance Nav & Control Engr 3 & 4

Description:
Please let me know if you would be comfortable with the job description and do send me your updated resume asap

Embedded Engineer - Guidance Nav & Control Engr 3 & 4

Location: Long Beach, CA
Duration: 6+ Months

Job Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
- Eliciting and defining the software requirements.
- Designing, implementing, and integrating a solution to meet the requirements.
- Planning and executing the validation of the requirements and verification of the solution.
The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 62Z-Math & Algorithm Dev Analysis
 
Job Location: Long Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/13/2019
Last Updated: 04/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV - (Everett, WA)

Description:
Several openings in WA:

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

CATIA V5

Prefer an AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipTDEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers // Everett, WA and SC- Both states

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer



Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/11/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers-Multiple Locations

Description:
Equipment & Tool Designer 3, 4

Location: Everett, WA / North Charleston, SC/ New Orleans, LA/Berkeley, MO
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

----------------------------------------------------------------

Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4-6+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 4 months
Start Date: Asap
Input Date: 12/05/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 03/04/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
Description/Comment:
The Electrical Engineer will develop FPGA designs for all major vendors and device families including: Xilinx, Altera, Lattice, and Microsemi. Designs are implemented using VHDL and support the following type of applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) Digital Signal Processing (DSP), control loops, data links, embedded processing, and processor interfaces.
As a configurable logic designer you will work with circuit card designers and systems engineers to develop requirements, select parts, architect the device, perform code development, simulations, and place and route. Designs are verified against requirements using both directed test and constrained random methodologies and are supported from requirements definition through integration and test, and eventually production. Configuration management of the design is maintained throughout the entire design process.

Required Skills:
* Ability to apply advanced digital design knowledge and principles to complex designs
* Proficient at using a hardware description language such as VHDL, Verilog, or System Verilog
* Proficient with FPGA timing constraints and timing closure
* Proficient with digital toolsets and backend vendor tools
* Proficient with a software or scripting language
* Ability to take a design from concept to production
* Ability to collaborate and work with other disciplines
* Ability to solve integration issues and determine root cause
* Self-directed - Able to complete tasks with minimum oversight
* Strong written and verbal communications
* Cross discipline knowledge such as software, digital signal processing, etc.

Desired Skills:
* Digital Signal Processing and simulation using MATLAB or equivalent
* Experience applying fixed-point analysis and conversion of floating point algorithms
* Experience with embedded systems design utilizing Microblaze, NIOS, and ARM processors
* Knowledge of encryption/decryption standards such as AES, RSA, ECC, etc.
* Knowledge of industry standard interfaces and protocols such as AXI, PCIe, SPI, I2C, etc.
* Integration experience with FPGA based systems
* Knowledge of ASIC design flow and process
* Familiarity with advanced verification techniques
* Ability to manage and trace requirements.

Required Education:
Bachelor of Science in Electrical Engineering, Science or Mathematics with a minimum of 4 years of relevant experience
 
Job Number: AZ47864
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 03/05/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer – Level 2

Description:
Location: Camden, AR
Rate: $45.00 - $50.00/HR
Duration: 6 month contract
Shift: 4/10 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
Under general direction, the Senior Facilities Engineer determines approaches to objectives demonstrating a complete understanding and application of principles, concepts, and practices.

Typical responsibilities include:
- Provides solutions to problems involving unusual complexity
- Conceives and plans facilities engineering projects involving the development of new approaches and methods to attain objectives
- May provide input to department objectives and long-range goals
- Keeps current within area of specialty in support of project assignments
- Provides technical advice on projects, including feasibility, planning, costs, and time
- Prepares data required for special projects to ensure maximum cost effectiveness
- Acts as a technical advisor and expert on process systems, as well as equipment and manufacturing facilities
- Ensures that work performed by the Company’s personnel or contractors conforms to national, state and local laws, regulations and codes
- Develops standards and design criteria for projects such as the construction and renovation of facilities, office and plant layouts, space planning, etc.
- May direct critical projects with large scope and difficult complexity
- May represent the organization at staff meetings, project review meetings, etc.
- May assign projects and provide direction to less senior employees and support staff
- Represents the Company as the prime contact on assigned facilities engineering projects
- May plan, schedule, oversee, and assign preventive maintenance and repair assignments
- Plans procurement strategies and provides technical expertise in the construction of well head facilities, pipelines, and treatment plants

Knowledge of:
- Facilities Engineering principles and practices
- Standards, codes, and regulations pertaining to the design, construction, and maintenance of structures and facilities
- Computer systems and applicable software
- Modern materials, methods, and techniques of design, construction, installation, and maintenance of structures and facilities
- Site remediation and treatment operation
- Development and use of contracts, estimates, and specifications
- Techniques and procedures of project management and procurement
- Occupational Safety and Health regulations and safe work practices
- Elements of cost in construction and maintenance, including the determination of unit cost records
- Cost of construction and maintenance, including the determination of unit cost records
- Building construction processes and procedures, equipment, tools, materials, and their application
- Local, state, and federal building codes and standards
- Inspection and investigation techniques
- Use of engineering instruments and tools
- Facility and equipment maintenance principles and practices

Ability to:
- Make engineering designs and prepare complete plans for projects
- Maintain records and prepare reports and correspondence related to the work
- Physical skill and ability to inspect working environments, which may include climbing ladders and operating equipment
- Communicate effectively with others
- Maintain favorable public relations
- Read and interpret construction blueprints, plans, drawings, and specifications
- Analyze costs of construction projects
- Determine compliance of structures and specifications
- Learn and utilize computer aided design system
- Maintain records and prepare reports and correspondence related to the work
- Use computers and available software applications to maintain records and prepare technical reports

Education:
- A Bachelor's degree in an appropriate discipline and three (3) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 10572
Job Location: Camden, AR
Rate: $45.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/05/2019
Last Updated: 05/08/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware Design Engineer

Description:
General Description:

The successful candidate will be responsible for design, simulation, coding, and implementation of DSP and control algorithms in FPGAs for generating and decoding waveforms. This position will be part of a team developing a suite of commercial avionics communication and navigation equipment based on software defined radio methodologies.





Key/Core Qualifications:

High level knowledge of communications systems, modulation, demodulation, digital signal processing, discrete-time math, various waveforms; AM, FM, D8PSK, C4FM, PI/4DQPSK, etc…
Demonstrated ability to;
Design and simulate waveform generators and decoders with high level tools (e.g. MATLAB)
Implement complex algorithms using FPGAs, adeptly handling placement, routing, and timing constraints.
Work with a project team to resolve integration issues at board and system levels
Experienced with bench equipment; network/spectrum/vector analyzers, oscilloscopes, etc.
General knowledge of current FPGA technologies, have worked with a major suppliers products; Xilinx, Altera, Actel, Lattice, Atmel, etc.
Experience working in a requirements based environment
Works to and supports schedules and metrics
Experience mentoring junior engineers
BS EE or equivalent.
Proficient in VHDL or Verilog
5+ years of experience in radio development


Preferred Qualifications:

Experience working in a team developing product and board level requirements.
Design experience of software defined tactical radios (preferred), and/or Com/Nav designs
Experience with Requirement Management tools
Experience developing under FAA certification environment, e.g. DO-254
Knowledge of the following technologies/skills is a plus:
P-25 system and C4FM/CQPSK modulation techniques
Tetra system and PI/4DQPSK modulation techniques
Radio navigation and communications standards; DME, ILS, VOR, GPS, etc.
Mesh radio’s, WiFi, Codec, 3G/4G LTE
 
Job Location: Prescott, AZ
Rate: $125-135K
Per Diem: No
Overtime: NO
Duration: PERM
Start Date: ASAP
Input Date: 03/08/2019
Last Updated: 04/03/2019
Firm Name: GREENLIGHT PROFESSIONAL SERVICES
Attention: Jason
Address: 319 LITTLETON RD
City, State: WESTFORD, MA 01886
800 Phone: 877/562-4477
Website: www.gpsnational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Advanced Instrumentation and Data Acquisition Systems)

Description:
This ideal candidate will design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques. The will take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
• Support laboratory testing of Space hardware,
• Develop and validate tooling concepts,
• Author and maintain operation/test procedures,
• Preparation of standardized operation/test sheets,
• Defining test rig and facility requirements,
• Participation on program Integrated Product Development teams,
• Review drawings and concepts, and
• resolve productivity concerns.

Requirements
Experience with advanced instrumentation and data acquisition systems.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal.
Ability to proficiently operate common Microsoft Office software products

Desired Skills
Knowledge of LabVIEW
 
Job Number: 1910099675
Job Location: Windsor Locks, CT
Per Diem: no
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full Stack Developer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Full Stack Developer
(US Citizenship Required*)
Washington DC
2019-8208

Responsibilities:
• Work closely with other Software Engineers as part of a diverse, innovative Agile/Scrum development team to produce user-friendly solutions for a web user interface-based application
• Opportunity to evaluate and implement advanced web user interface frameworks
• Develop efficient server-side Java applications that facilitate various business processes that achieve the program mission
• Develop Java based web services server side and client-side applications
• Participate and contribute to design sessions with other creative engineers to construct high-end solutions to meet customer needs
• Perform software requirements analysis, participate in research, design, develop and test software and tools, including development of new work products or enhancing existing applications, systems or embedded products
• Code, test, integrate and document software solutions
• Apply principles and techniques of computer science, engineering, and mathematical analysis to the development of complex software and architectures
• Research and analyze data, such as customer design proposals, market trends, state of technology and industry, specifications and manuals to determine feasibility of design or application
• Participate in internal review of software components and systems
• Receive little instruction on day-to-day work
• More often responsible to define the scope, schedule and expectations for the work they execute or lead
• Independently determine approach to solutions
• Follow standard practices and procedures in analyzing situations or data from which answers can be readily obtained
• Contribute and accountable to the completion of major programs and projects
• Resolve significant and diverse problems and issues of broad scope and complexity
• May provide leadership and/or direction to lower level employees and teams
• Build stable working relationships internally
• Network with senior internal and external personnel

Qualifications:
• Required – active Top Secret clearance. Candidates without this clearance will not be considered.
• Agile experience preferred.
• 10 years of experience with programming and software development including analysis, design, development, implementation, testing, maintenance, quality assurance, troubleshooting and/or upgrading of software systems.
• 5 years of experience architecting software solutions based on customer requirements
• 5 years of experience leading technical teams
• 3 years of experience designing and implementing automated build and deployment pipelines and supporting platform
• Experience troubleshooting and supporting enterprise applications while maintaining 24/7 availability
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), and 5+ years of relevant experience; or Master's degree and 3+ years of relevant experience.

Moseley Technical Services, Inc. and our client are AA/EEO/Veterans/Disabled Employers.
 
Job Number: 2019-8208
Job Location: Washington DC, Washington DC
Rate: Based on experience
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance Navigation & Control Engineer (Embedded Software Development)

Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
• Eliciting and defining the software requirements.
• Designing, implementing, and integrating a solution to meet the requirements.
• Planning and executing the validation of the requirements and verification of the solution.
• The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Area of Expertise:
•Embedded Software Development
•FAA certification requirements

Technical Skills:
•Simulink
•Version Control
•Requirements Development
 
Job Number: GNCDEC
Job Location: Long Beach, CA
Rate: Best in Market
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HIL Test Engineer

Description:
Responsibilities
Execute software regression and system level verification tests in accordance with established test plans on NI HIL system.
Support regression and verification testing and collaborate with electrical and software engineers to identify, define, and resolve issues that are identified during software development and integration.
Interpret data logs to identify issues for engineering investigation.
Create test automation scripts wherever possible and create detailed test reports to review with development engineers

Required Experience & Skills:
Bachelor's degree in engineering required
8 to 10 years of engineering experience required
Ability to understand autonomous technologies, machine systems and design test cases for the systems
Previous experience with computer applications and software related to engineering field
Testing/Validation experience dSPACE Hardware-In-The-Loop (HIL) experience HP Quality Center experience
Knowledge of technologies used in Autonomy - Perception, Planning, and Positioning systems
Linux experience also a plus
ARi is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, ARi offers many job opportunities which can be found through our employment website at https://www.ariglobalsolutions.com/careers/us-jobs/.
 
Job Number: 51105
Job Location: Oshkosh, WI
Rate: Open
Input Date: 03/12/2019
Firm Name: ARI GLOBAL SOLUTIONS
Attention: Hope Rhodes
Address: 221 ALTOFER LN
City, State: EAST PEORIA, IL 61611
Phone: 309/691-2533
Website: www.ariglobalsolutions.com

Helpdesk/Deskside Support Engineer

Description:
PDS Tech, Inc. is seeking a Helpdesk/Deskside Support Engineer for an open position in Irving, TX
3-6 Months Contract to hire
 
 

Job Requirements:
  • Minimum A+ Certification, Network + certification or job experience.
  •  Basic VPN tunneling knowledge.
  •  Basic Networking troubleshooting experience.
  • Level 2/3 Desktop Support working with C/Corporate level 
  • Understand the concepts of a router, switch and firewall. Ability to provide writing reports to management.
  • Associates degree in Computer Science or related area is preferred.
  • Certifications: A+, Network+ or other training in related field is preferred.
  • Experience in remote support of networking Multi-Function printers including trouble shooting printing and scanning issues.


Skills:

  • Knowledge of the operation and support of computers, local area networks, and printers. Knowledge of standard networking protocols, knowledge software applications and operating systems, including but not limited to Windows XP/7 and QuickBooks.
  • Ability to read and understand technical manuals and procedural documentation.
  • Ability to convey complex information to others, communicate both verbally and in written form, analyze and troubleshoot technical and computer-related problems.




 

 
Job Number: 1710064649
Job Location: Irving, TX
Duration: 12 months
Input Date: 02/13/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021NJIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Performance Analyst and Investigator

Description:
Currently looking for an experienced Human Performance Analyst to fill an opening with a company located in Moses Lake, WA. Interested candidates should have a Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field, along with at least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.

Responsibilities of the Human Performance Analyst

Serve as the safety team’s expert on human performance, team dynamics, and flight physiology.
Advise aircrew, dispatchers, test managers, and the Flight Test Safety Officer on scientific aspects of human psychology, physiology, ergonomics, and anthropometrics.
Provide human performance insights to help the Flight Test Safety Officer prepare Test Hazard Analyses, Safety Review Boards, and related functions.
Assess proposed flight manual changes and procedures for adherence to best practices in human performance.
Work with the Flight Test Safety Officer to develop a program of non-punitive observation of flight simulations.
Perform the observations, then debrief the flight crew and trend the data collected in a fashion similar to Line Operations Safety Assessments (LOSAs), but limited to the simulator.
Carefully review event reports and newly found hazards for human elements and how they impact risk and potential mitigations.
Develop and administer psychographic surveys to determine safety cultures and climates present in different parts of the organization, trend how they change over time, and analyze possible causes responsible for the changes.
Establish, adjust, and track Safety Performance Indicators (SPIs) and Allowable Levels of Safety Performance (ALoSP) associated with human performance, as part of SMS Safety Assurance requirements.
Create original and customized courseware in CRM/TEM and human performance for the unique intercultural employees and then coordinate with other members of the safety team to facilitate and instruct using innovative methods that use the most modern education and training technology.
Provide expert insights on the psychological barriers to change as new safety initiatives are fielded.
Create a system for tracking the currency of aircrew flight physiology training, to include altitude chamber initial and recurrent training.
Perform ergonomic assessments of workplace settings, ranging from aircraft seating to office functions conducive to repetitive stress disorder.
Work shifts as the “on-call” safety representative for time-sensitive safety issues, to include occasionally being on-call after normal business hours.
Assist and/or lead incident investigations and participate in management review of all serious incidents.
Develops and implements the human performance elements of the Risk Management (RM) program and instructs strategic and real-time RM principles to employees and executive staff.
Participate in annual budget and requirements development process for the safety team.


Requirements
Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
Current driver's license and current civilian passport or ability to obtain passport.
Ability to pass drug screening test.
Respectful of other national and professional cultures and possessing a willingness to learn about other cultures.
Ability to use computers and associated software programs, such as MS Word, PowerPoint, and Excel.
Ability to integrate smoothly into a fast-paced technological environment while remaining calm in situations where others may be overwhelmed.
Ability to field and prioritize a multitude of near simultaneous request from different members of a team while remaining courteous, positive, and effective.
Strong analytical skills with demonstrated problem solving ability.
Excellent written and verbal communication skills for presenting safety and human factors information.
Excellent interpersonal skills and intercultural sensitivity to work effectively with all levels of an international organization.
Preferred

Master’s degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a master’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
An understanding of the ICAO or FAA SMS organizing framework.
Experience conducting human factors analyses, such as task analyses and human error analyses, associated with accidents, incidents, or voluntary hazard reporting such as the Aviation Safety Action Program (ASAP).
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Business Analyst

Description:
IT Business Analyst

Windsor Locks, CT
$52.96/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages low to mid complexity functional changes and enhancements from development through production; recommending and implementing system enhancements. Develops new program specifications to support specific customer needs and system upgrades, including new releases and resolves problems with current systems.

Minimum of 5-7 years Data Analytics

Activities: Mining Data, Organizing Data, Merging Data, Reporting Data, Analyzing Data

3 out of 5 of the software skills below needed: Bachelors Degree may be waved if proficiency can be demonstrated Microsoft Access, Data Base Development, SQL programming, SAP Business Objects, Business Intelligence Tools, Visual Basic programming, SAP, Extract Full Time 40 hours required. Some overtime could be possible if justified.
 
Job Number: 10623
Job Location: Windsor Locks, CT
Rate: 52.96
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Design Engineer

Description:
Our client is looking for an Industrial Design Engineer to work in Wichita, Kansas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Must be creative during the early phase of the Industrial Design Process, must have the ability to generate multiple concepts and support / lead the design team during the brainstorming, concept development phase.
* Uses design research, ergonomics and 3D models to define design intent for both interior and exterior aircraft design.
* Works as part of a multi-function design team, including industrial designers, individuals from other technical disciplines, and suppliers in the development of product design.
* Collaborates with Customers, Senior Management and other Cross Functional Teams. (SLT, AD Engineering, Int. Engineering, Marketing, Sales, Development Shop).
* Mentors design team members during the design process, shares skills and be open to training new members as needed. Will fosters a team environment and a positive work culture.
* Supports department budgets and labor forecasting. Visits University Design programs and mentors design Intern students. Help build our future design teams.
* Understands the design strategy with-in Textron Aviation, helps create new design / innovation with-in the interior organization.

Mandatory Qualifications and Experience:
* Bachelor’s Degree- Industrial Design or Equivalent
* 13-18 Years- Industrial Design experience working for an OEM or Consultancy.
* Background with Software- Alias, Catia, Adobe creative suite, KeyShot, 3ds Max
* Understanding of prototyping methods and tools associated
* Knowledge of materials and manufacturing process
* Previous experience working with Cross Functional Teams
* Expert knowledge of 3D modeling, complete knowledge of manufacturing methods, material properties, human factors & engineering disciplines.
* Has strong knowledge of marketing & branding.
* Experience with: Autodesk Alias Surface 3D, Rhinoceros 3D, Adobe Photoshop, KeyShot 3D rendering software, 2D sketch ability

Desired Qualifications and Experience:
* Adobe Illustrator
* HTC Vive VR Headset
* 3D Studio Max
* Catia V6

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129891
Job Location: Wichita, KS
Duration: 6 months
Start Date: ASAP
Input Date: 03/04/2019
Last Updated: 03/19/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information Systems Project Manager

Description:
Information Systems Project Manager

Jacksonville, FL
$35.08/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
Serves as an information systems security professional/system administrator applying knowledge of information security services analysis concepts, practices and procedures and executes security procedures for classified computer systems based on the Department of Defense (DoD), and other U.S. Government agency security requirements. Execute local policies, processes, and procedures to comply with all National Industrial Security Program (NISP) and DSS Assessments and Authorization Process Manual (DAAPM) requirements. Performs physical security functions as needed (employee badging, access control programming and maintenance, intrusion alarm).

Knowledge of information systems security components and best practices including; firewalls, intrusion detection systems, anti-virus software, data encryption, and other industry-standard techniques and practices. Windows Server experience required; Knowledge of multiple operating systems and related utilities and hardware, server hardware and switches, storage management and TCP/IP, network monitoring and tools; Experience with VMware preferred. Current secret security clearance or eligibility. If not, agency will be required to submit the candidate for a security clearance.

Associates degree required
 
Job Number: 10467
Job Location: Jacksonville, FL
Rate: 35.08
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 05/08/2019
Last Updated: 05/16/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Test Engineer

Description:
Must Be Eligible For a Secret Clearance

Test Engineer - Integration.Test Engineer-Integration requires both Software & Hardware skills:

Software: skilled in 'C' using NI LabWindows/CVI, LabView and Test Stand, and interfacing with test equipment. Assignment will include the design, development, integration, testing, and fielding of software for a test set.

Hardware: skilled in Test Equipment and Interface Test Adapter (ITA) design and interfacing with test equipment. Knowledgeable in 'C' using NI TestStand, LabView and/or LabWindows/CVI development environments desired.
 
Job Number: 46069
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst
Location: Fort Worth, TX
Pay Rate: $39.41
Duration: 1 Year
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

Flexible working hours required
SAP - 1+ years experience preferred
 
Job Number: 10490
Job Location: Fort Worth, TX
Rate: 39.41
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/06/2019
Last Updated: 04/22/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 1 year

Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes documents to manage the deployment of processes. Leads evaluation of emerging technologies for application to business needs. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under consultative direction.

The following skill sets are desired:
- CATIA or other 3D modeling software
- CAMS experience
- Data collection (scanning preferred)
- Data analysis (Polyworks, Spatial Analyzer, GOM)
- Software Development Skills
- Preferred LabView, C++, VB, or C#
- Basic controls knowledge
- Preferred experience with Siemens controllers, both programming and operation
- Knowledge of aircraft assembly,
- preferred prior knowledge of shimming processes.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 10/30/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Windsor Locks, CT
Rate: $36.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
-Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.
-Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems.
-Desired experience should include working on the manufacturing of components such as, heat exchange's, pumps, fans, & accumulators.
-Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.
-Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable. US Person is required
 
Job Number: 10447
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 04/15/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 1

Description:
Manufacturing Engineer Level 1

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. PERSON OR RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns.

Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 2-5 years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10605
Job Location: Windsor Locks, CT
Rate: 25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2019
Last Updated: 05/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
7801 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-7801
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/25/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
Manufacturing Engineer Sr

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
MUST have a Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-8105
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/28/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Matlab/Simulink Software Engineer

Description:
4 Open Positions

Project: FMS Software development & test

- Model based software development with Matlab/Simulink & Embedded Matlab Per Kevin - client will consider engineers with strong Matlab/Simulink experience even if it not from Aero.
- Development of missing HLR's and design
- Minimum of 3 years of C++
- DOORS
- Minimum of 2 years of FMS experience- preferably guidance/navigation
- lateral/vertical guidance exp. a plus
- DO 178B/C, Level B
- Minimum of 3 years of V&V experience
- Thorough understanding of requirements based testing



- Duration: 9-12 months +

- Work locations:

- Long Beach, CA (preferred)

- Mesa, AZ

- El Segundo, CA
 
Job Number: WW031219
Job Location: Los Angeles, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9-12 months
Start Date: Immediately
Input Date: 03/12/2019
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Matlab/Simulink Software Engineer

Description:
4 Open Positions

Project: FMS Software development & test

- Model based software development with Matlab/Simulink & Embedded Matlab Per Kevin - client will consider engineers with strong Matlab/Simulink experience even if it not from Aero.
- Development of missing HLR's and design
- Minimum of 3 years of C++
- DOORS
- Minimum of 2 years of FMS experience- preferably guidance/navigation
- lateral/vertical guidance exp. a plus
- DO 178B/C, Level B
- Minimum of 3 years of V&V experience
- Thorough understanding of requirements based testing



- Duration: 9-12 months +

- Work locations:

- Long Beach, CA (preferred)

- Mesa, AZ

- El Segundo, CA
 
Job Number: WW031219
Job Location: Los Angeles, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9-12 months
Start Date: Immediately
Input Date: 03/12/2019
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Matlab/Simulink Software Engineer

Description:
4 Open Positions

Project: FMS Software development & test

- Model based software development with Matlab/Simulink & Embedded Matlab Per Kevin - client will consider engineers with strong Matlab/Simulink experience even if it not from Aero.
- Development of missing HLR's and design
- Minimum of 3 years of C++
- DOORS
- Minimum of 2 years of FMS experience- preferably guidance/navigation
- lateral/vertical guidance exp. a plus
- DO 178B/C, Level B
- Minimum of 3 years of V&V experience
- Thorough understanding of requirements based testing



- Duration: 9-12 months +

- Work locations:

- Long Beach, CA (preferred)

- Mesa, AZ

- El Segundo, CA
 
Job Number: WW031219
Job Location: Los Angeles, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9-12 months
Start Date: Immediately
Input Date: 03/12/2019
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Must Be Eligible for a Secret Clearance.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using SolidWorks Software. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 46180
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Must Be Eligible for a Secret Clearance.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using SolidWorks Software. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 2239
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 03/06/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Pro-E / CREO)/Manufacturing

Description:
Requirements:
•Strong proficiency in using PRO-E \ CREO or a comparable CAD software package
•Detailed knowledge of Manufacturing and Assembly procedures
•Knowledge of the Standard Design Process

Candidate must also have the ability to produce and check drawings conforming to ASME Y14.5 and to support, and verify design with standard hand calculations for form, fit, function, and structural strength.

This engineer should be able to prepare reports of results of analysis and experimentation, and the ability to present design content at various design reviews must be evident.

The Engineer will work multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally, they will be responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
•Strong analytical and problem-solving skills
•Pro-Engineer / CREO or equivalent CAD knowledge for model, layout, and drawing creation
•Finite Element Analysis tools (ex. ANSYS, Pro-Mechanica, NASTRAN/PATRAN)
•Able to perform Linear Stress Analysis based on the experience, vibe and shock, fatigue
•Hands on and Service mentality Design for Manufacturability
•Good verbal and written communication skills.
•Excellent team skills.
•Ability to prioritize work independently with little direction while staying on task.

Education:
•Bachelors
 
Job Number: 1910099028
Job Location: Houston, TX
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer II

Description:
Our client is looking for a Mechanical Design Engineer to work in Grand Prairie, Texas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Product Design support to design, develop, and integrate components for a Unmanned Air Vehicle (UAV) system.
* The successful candidate must demonstrate innovative approaches to new design, and will be responsible for performing 3D parametric modeling in the development of solid models, creating and releasing 2D drawings including Interface Control Drawings (ICDs) and Source Control Drawings (SCDs), performing both Geometric Dimensioning and Tolerancing and tolerance stacks analyses, and creating engineering release (ER) documentation.
* Effort will require coordination of design(s) with other mechanical / electrical disciplines.

Mandatory Qualifications and Experience:
* Bachelors of Science degree in Mechanical Engineering with a strong technical background, or 10 years of equivalent experience
* 6-8 years of Computer Aided Design software experience using SolidWorks Software.
* Must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
* Must have SolidWorks experience and the ability to utilize Microsoft Office tools.

Desired Qualifications and Experience:
* Knowledge and proficiency with a model/drawing data management tool, Windchill.
* A general understanding or experience with manufacturing engineering and fabrication processes.
* Familiarity with Microsoft Office Applications.
* An active DOD Secret Clearance (with background performed within 5-years) is a plus.
* Prior LMC employment / experience is a plus
* Basic EMI shielding knowledge and Rapid prototyping experience (Additive and traditional Manufacturing) is a plus.

The ideal candidate for this position will possess the following skills and characteristics:
* Self started needed capable of working in a dynamic, fast paced, team environment.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129991
Job Location: Grand Prairie, TX
Duration: 1 year
Start Date: 05/01/2019
Input Date: 03/07/2019
Last Updated: 03/19/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10407
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Duration: 6 mos
Input Date: 02/05/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Performs verification and validation of component level requirements to approved processes and tools. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works with supplier for identification and review of supplier design changes for acceptability and impact. Trains others. Works under general direction.
Skills:
Software:DOORS
Technical Skills:
•Change Control
•Requirements Development
•Supplier Interaction
 
Job Number: 1113-2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test & Evaluation Engineer 3

Description:
Mechanical-Test & Evaluation Engineer 3

Location: Seattle, WA
Duration: 6+ months

Note: Looking for Mechanical Engineer Designer with CATIA V5 experience.

Job Description:
Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction. Mechanical Designer with CATIA V5 experience.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/03/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
Experience with Laser Trackers, scanning and / or photogrammetry preferred. The ability to perform measurements accurately and precisely while assisting with root cause analysis based on the data. Metrolog software knowledge preferred but SA, Polyworks, Verisurf, or Geomagic knowledge more than acceptable. Experience with measuring large assemblies and tooling preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.
• Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-324
Job Location: Savannah, GA
Rate: $55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/15/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/25/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: CA
Rate: $55-$65/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 08/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Composite Aero-Structures Design Engineer

Description:
Composite Aero-Structures Design Engineer
Location: Mojave, CA
12+ month contract

Essential Functions & Responsibilities:

Use CATIA V5 with Composite Work Bench to Design Composite aircraft structures.

Education: BS degree in Engineering: Mech-Aero-Civil-Struct.

2-10 years of experience required.

REQUIRED Minimum Composite Design Experience:

2 Year’s Experience of air- frame design (Wing or Fuselage or Empennage)
2 Years experience with CATIA V5 with CPD / CWB and/or Fibersim.
Mandatory Software Skills:

CATIA V5 + Composite Work Bench CWB / CPD or Fibersim.
MS Word, MS Excel, MS PowerPoint.
Personal and Interpersonal Skills

Clear intuitive understanding of load path & design intent of structural parts.
Understanding of aircraft internal loads & how to design efficient structure.
Strong interpersonal skills with willingness to ask questions & dig for answers
High degree of collaboration and openness with team members is expected.
Ability to work independently, be insightful, resourceful & innovative.
Willingness to do whatever work is assigned.
Great verbal & written communication skills in English.
Ability and willingness to interface with your co-workers.








Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56343
Job Location: Mojave, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Software Engineers in El Segundo, CA

Description:
Software Engineer

Location: El Segundo, CA
Duration: 6+ months

Description:
Client Satellite Division in El Segundo is seeking Software Engineers, passionate about space and excited to work in a multi-disciplined, collaborative engineering environment to design, develop and implement control and communications software for a new fleet of Client satellites.

A variety of projects to match diverse interests include:
- Software infrastructure and device drivers for new embedded processors and hardware interfaces to satellite sensors and actuators.
- Communication payload resource control, data management and network interfaces.
- Guidance and navigation control algorithms.
- Web-based tools and services supporting satellite development and operations.
- Integration and test of satellite control software using simulators and ground systems.

Primary Responsibilities:
- Responsible for full life-cycle development including requirements analysis, software architecture, design, coding, unit test, integration and formal qualification.
- Candidate should possess excellent communications skills to participate in design and code reviews, have a thorough understanding of version control and software quality attributes, such as testability, portability and maintainability, and enjoy a self-driven and collaborative development approach.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Qualifications:
Degree and typical experience in engineering classification:
Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Degree in computer engineering, computer science or equivalent is preferred.

Basic Qualifications:
- 5+ years of software development experience in C++ using object oriented design methods.
- Proficiency in design and implementation of multi-threaded real-time applications; use of TCP/IP protocols and user/kernel level OS abstractions.

Preferred Qualifications:
- Hands-on experience with Java, C#, JavaScript, Python, TCL, XML.
- Experience with avionics control algorithms, search algorithms and math libraries, telemetry and command handling.
- Hands-on experience with hardware interfaces, embedded processor architectures, I/O device drivers and board support packages.
- Hands-on experience with embedded/real-time OS (Linux, VxWorks, Integrity) and CAN or SpaceWire protocols.
- Hands-on experience in networking, SQL and noSQL databases, web-based development.
- Proficiency in UML modeling, test-driven development, Agile process and DevOps tools.

Experience Level:
Individual Contributor
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: January
Input Date: 12/26/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer (Numerical Control Programmer) - (Everett, WA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment.

CATIA V5
Wing Composites

Prefer, not required: AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: NCProgWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 04/05/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
New England Supplier Quality Manager (211)

Description:
*This is a full time, 6 month contract position, based in Nashua, NH will be travelling in the New England area 50% of the time.*

*Must be able to get a Secret Security Clearance after starting, but must apply prior to job start.*



We are seeking a New England States travelling Defense Subcontractor Supplier Quality Engineer who will monitor our manufacturing suppliers to ensure their manufactured parts and assemblies are compliant to company standards. As part of the position it will be expected the candidate travel 50% of the time to local as well as overnight travel, will, on a regular basis, determine if products conform to drawings, specifications, established requirements and take corrective actions based on root cause analysis.



Contractor will be expected to make periodic reports, analyze, plan and take corrective action on issues that arise. Candidate will be constantly communicating and monitoring issues with supplier including metrics/scorecards such as Key performance indicators (KPIs) and SCAR which ensure suppliers are meeting company goals. Applicants will be working in supply chain logistics from raw material to finished goods including, working with ERP systems and quality management software.



Required:
*5 years’ experience in performing Defense Subcontractor Supplier Quality
*Experience with PWB/CCA inspection/test, equipment/instrumentation (IPC-A-600, IPC-A-610) certification
*Understanding of a AS9102B processes
*Strong background in monitoring and communicating regularly with suppliers
*Experience in Special Process application and validation (i.e. plating, paint, welding, heat treat)

*Knowledge of Environmental Stress Screening (ESS) and supply chain logistics from raw material to finished goods

*Experience with Enterprise Resource Planning (ERP) system/Quality Management Software system
*Able to get a Secret Security Clearance after starting, but must apply prior to job start.
*4 Year degree in Engineering or similar technical area.



Pluses:
*Experience working in a Lean Six Sigma Green / Black Belt environment, certification preferred

*Familiar with Composite material machining and fabrication; GD&T
*Experience executing or coaching suppliers on AS9102 FAIs and PPVs

*Working knowledge of APQP and PPAP techniques
 
Job Number: 211
Job Location: Nashua, NH
Input Date: 03/12/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Non-Destructive Testing (NDT) Level 3 Technician (UT, ET and PT)

Description:
PDS Tech, Inc. is seeking a Non-Destructive Testing (NDT) Level 3 Technician in Stratford, CT
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components. 

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.
Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Duration: 18 months
Input Date: 02/25/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw1WQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Destructive Testing (NDT) Level 3 Technician (UT, ET, PT)

Description:
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components.

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 18 mos
Start Date: ASAP
Input Date: 03/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Ops Trainee

Description:
PDS Tech is seeking an Ops Trainee for an open position in Savannah, GA.
In your role, you will:

Position Purpose:

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

Principle Duties and Responsibilities:

Essential Functions: 1. Under specific instruction and guidance, perform fitting of detail parts and basic drilling and riveting operations using basic mechanic hand tools (pneumatic drills, rivet gun, counter sinks, reamers and files, etc.) 2. Ensure parts and work content meets the instructions of assigned manufacturing employee and/or Quality Control Inspector. 3. Learn to read work orders, blueprints, and specification sheets to determine sequence of operation and work requirement. 4. Align and assemblies parts to be riveted using holding fixtures, pins, clamps and fasteners. 5. Observe and assist to become familiar with parts and assemblies, then works with decreasing supervision as experience is gained. Perform other duties as assigned.

Languages Required (in addition to English): No Selection



 


 

As our ideal candidate, you will meet the following requirements:

Education and Experience Requirements:
High School Diploma or GED required. Entry level position. Strong mechanical aptitude. Enrollment in a Technical Aviation program preferred. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills. 

Other Requirements: 2. Must be able to read a scale and perform basic shop math. 3. Read and comprehend basic documents and instructions. 4. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. 5. Must demonstrate good housekeeping and safety practices. 6. Proficiency in current personal computer based software. 7. Must be available to work any shift. 8. Must be able to lift and transport objects up to 40 pounds.



Unique Skills:



Must be able to enter wing fuel bays through a 9" x 19" opening. Must be able to work inside confined spaces. Must be able to meet requirements of respirator certification.


 
Job Number: 1910099150
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 03/05/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jVW0QAM&URLSource=cjhunter

Ops Trainee

Description:
PDS Tech is seeking an  Ops Trainee for an open position in Savannah, GA.

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

Principle Duties and Responsibilities:

Essential Functions:
1. Under specific instruction and guidance, perform fitting of detail parts and basic drilling and riveting operations using basic mechanic hand tools (pneumatic drills, rivet gun, counter sinks, reamers and files, etc.)
2. Ensure parts and work content meets the instructions of assigned manufacturing employee and/or Quality Control Inspector.
3. Learn to read work orders, blueprints, and specification sheets to determine sequence of operation and work requirement.
4. Align and assemblies parts to be riveted using holding fixtures, pins, clamps and fasteners.
5. Observe and assist to become familiar with parts and assemblies, then works with decreasing supervision as experience is gained.
Perform other duties as assigned.



 

Education and Experience Requirements: 



  • High School Diploma or GED required.
  • Entry level position.
  • Strong mechanical aptitude.
  • Enrollment in a Technical Aviation program preferred.
  • Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skill
  • Must be willing to work second shift if required.


Other Requirements:
1. Must be able to read a scale and perform basic shop math.
2. Read and comprehend basic documents and instructions.
3. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
4. Must demonstrate good housekeeping and safety practices.
5. Proficiency in current personal computer based software.
6. Must be available to work any shift.
7. Must be able to lift and transport objects up to 40 pounds.   
 

 


 
Job Number: 1810088642
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/07/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mchkAAA&URLSource=cjhunter

P-8A Non-Acoustic Sensor Operator

Description:
Chipton-Ross is seeking a P-8A Non-Acoustic Sensor Operator located in Patuxent River, MD

RESPONSIBILITIES:
Contract to Hire Project Instructions
This is a contract to hire project

Primary Location: US-US-MD-Lexington Park

The P-8A Non-Acoustic Sensor Operator (EWO) will support airborne developmental testing of hardware and software for non-acoustic systems including radar, electro-optical, infrared imaging, electronic support measures, IFF, C4I networks, mission software and tactical common data-links. The selected candidate will perform aircrew duties as a member of the P-8A Integrated Test Team with Air Test and Evaluation Squadron Two Zero (VX-20) at NAS Patuxent River, MD. Candidate will be responsible for a variety of tasks that support P-8A flight testing, including participation in technical meetings, analysis of test requirements, test plan preparation, drafting detailed test procedures, conducting or supervising data collection in flight simulators, aircraft ground and flight environments, writing daily test reports, problem/deficiency reports and tracking. Flexible work hours may be required to support test activities. Most work will be conducted on-site at NAS Patuxent River, MD; however some travel will be required.

Past or current designation as a Non-Acoustic Systems Operator (EWO) in P-3C/P-8A aircraft is required.
Candidate selected must possess a minimum of 1000 hours in P-3C/P-8A or similar aircraft.

Current or former qualification as a P-8A Non-Acoustic Systems Operator (EWO) Instructor is desired. Flight designations current within 12 months of start date of employment desired. The position will allow various combinations of education and experience using a 1 year of education for 1 year of experience substitution.

Knowledge, Skills and Abilities: Applicant must possess extensive knowledge in the operation of airborne maritime environment Non-Acoustic Systems. Candidate must be able to pass the physical and training qualification requirements to provide contract aircrew support, including completion of Navy water survival and aviation physiology training, as well as annual FAA Class II flight physical. Candidate must be able to organize, demonstrate effective oral and written communications, and operate in a dynamic and fast-paced team environment. Candidate must be proficient with the Microsoft Office Suite (Word, Excel, and Power Point) and similar computer-based productivity applications. EOE/Minorities/Females/Vet/Disability Application Instructions For immediate confidential consideration, please apply online by clicking Apply Now to Join Our Team.

EDUCATION:
Accredited High School Diploma/GED and eight (8) years of related experience

A Bachelor's Degree in computer science, mathematics, physical sciences, engineering, or equivalent work related experience in Developmental Test, Operational Test, Fleet Introduction Team or Weapons and Tactics Unit is desired. Two years of systems integration and test experience with P-3C/P-8A Non-Acoustic Systems is desired.

WORK HOURS:
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 172151
Job Location: Patuxent River, MD
Rate: $DOE
Duration: 4 MONTHS
Input Date: 06/27/2018
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software 3 - Clearance / URGENT FL

Description:
Principal Engineer Software 3 (Job Number: 19007337)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 10, 2019

Target End Date: Jun 5, 2020

Requested Hourly Rate: 55.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Candidates NEEDED ASAP

The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR


Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience


Experience developing software / writing code in C/C++ or Ada

Experience with Linux



Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering


Strong Problem Solving Skills


Experience in Software Test


Familiarity with Atlassian tool suite and tools like git and Confluence


Familiarity with Agile software development process


DOORS


Eclipse or other integrated development environment (IDE)


Knowledge of Linux systems with basic commands


Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)


Experience with OpenGL
 
Job Number: JK-1748S
Job Location: Melbourne, FL
Rate: 55/hr max
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 06/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software Quality 3 - Clearance CA

Description:
Principal Engineer Software Quality 3 (Job Number:18027673)

Number of Openings: 1

Location: California-Rancho Bernardo

Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $52.00

Location: Rancho Bernardo, CA

Clearance: Secret needed to start

Candidate will provide the program’s overarching focus on systems and software, product and process, quality assurance throughout the entire software life-cycle.

• Actively engage and lead Systems and Software Quality Assurance SSQA) bid and proposal efforts to ensure the SQA cost estimating relationship and statement of work are properly bid and estimated.
• Participate in Peer Reviews and Product Reviews as a principal team member to ensure 1st time quality and compliance to program and company requirements.
• Ensure the flow down of requirements is complete and unambiguous and that consistent bidirectional traceability is maintained.
• Participate in contractual reviews and audits, program/IPT meetings, and configuration control board meetings to provide SQA leadership and guidance.
• Perform process audits of the engineering and management processes to assure compliance to established policies, procedures, work instructions, and program specific plans.
• Examine the products associated with the preparation and configuration control of software test environments to assess the team’s readiness to enter formal testing.
• Witness execution of software qualification and system acceptance tests to ensure tests are executed in accordance with approved test procedures, requirements are fully verified, and that all test procedure and software anomalies are documented and tracked to closure.
• Evaluate and ensure the overall capability and quality management system of software suppliers via; pre-contract supplier surveys, surveillance audits, product reviews, formal milestone reviews, and test witnessing.
• Facilitate thorough root cause analysis on all major findings product and process) and ensure appropriate corrective and preventive actions are developed and implemented in a timely manner.

Basic Qualifications:

· Bachelor’s Degree in a Science, Technology, Engineering and Math (STEM) and 5 years of software engineering or quality experience OR Master’s Degree in STEM and 3 years of software engineering experience; OR a PHD
· Experience developing and testing software coded in Java, C++, C and other OOP languages
· Experience within the aerospace/defense industry
· An active in-scope DoD Secret clearance
· The ability to obtain/maintain program access

Preferred Qualifications:
· Experience with software life cycle processes, including peer reviews, requirements analysis, implementation, test, configuration management, cyber security and risk management.
· Experience with modern software development models (Waterfall, Incremental, Spiral, Agile)
· Experience with software metrics implementation and analysis
 
Job Number: MB-1710S
Job Location: Rancho Bernardo, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 12/20/2018
Last Updated: 03/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Full-Stack Software Development Analyst CA

Description:
Principal Full-Stack Software Development Analyst (Job Number: 19003641)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 18, 2019

Target End Date: Feb 14, 2020

Pay rate: $46.00 - $53.00

Location: El Segundo, CA

Work schedule: 9/80

Duration of assignment: Up to 1 year

Searching for a full-stack business application developer well versed in .Net, MVC5, SQL, SSIS, SSRS, and/or SharePoint 2013. Additional key skills include:

- Working independently with little oversight.
- Ability to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
- Ability to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
- Candidate needs to cooperate with teammates on best practices and possible re-use of applications.
- Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
- Candidate should be able to juggle multiple assignments and manage changing priorities.
- Strong project management and communications skills are highly desired.


Basic Qualifications:

•Bachelor's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Minimum of 5 years experience with a Bachelor's Degree (3 years with a Master's degree and 0 with a PhD.) with programming in C#, ASP.NET MVC and MS SQL Server (RDMS, SSIS, SSRS), Web Services and Javascript related technologies
•Active Final DoD SECRET clearance. Interim not qualified.


Preferred Qualifications:

•Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Experienced in machine learning, advanced analytics, and data visualization, Tableau dashboard development
•Experienced in SharePoint 2013 Development
•CompTIA Security+ certification
•Strong understanding of product quality and statistical process control
 
Job Number: MB-1731S
Job Location: El Segundo, CA
Rate: 53/hr max
Per Diem: no
Duration: 1 year
Input Date: 02/08/2019
Last Updated: 05/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com