Job Search Results

Lead, Electrical Engineer ROIC Design

We are looking for someone who has experience in designing custom readout integrated circuits (ROICs) in state of the art image sensors. As ROIC Designer, you will help specify and design analog and digital integrated circuit designs for readout ICs.

Essential Functions:

The ROIC Designer will serve as technical expert and point of contact representing ROIC expertise across multiple integrated program teams. In this capacity, responsibilities will include capturing requirements in formal documentation, interfacing with sub-contract design vendors, and contributing to design reviews. You will provide technical input to the ROIC design team while directly contributing to the design effort.

As a key member on a growing team, you will be involved in all aspects of design including block-level design and simulation, chip-level architecture and verification, layout and physical verification, and silicon validation and characterization. The ideal candidate will have ROIC-specific design experience and a demonstrated willingness to mentor other engineers.

Qualifications:

Bachelor's Degree and a minimum of nine (9) years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. An equivalent combination of education and experience may also be considered. Position requires the ability to obtain and maintain a DoD Security Clearance, which requires U.S. Citizenship. Requires mastery level knowledge within a specific technical area or multiple job areas typically obtained through advanced education combined with experience. Viewed as an expert and/or resource within the field by peers in and outside the organization. Proven ability to understand system-level performance requirement and reduce to ROIC chip-level requirements. Experience designing two or more of: High speed differential I/O, A-to-D converters, bias generation, analog buffers, serializers, readout pixel unit cells. Custom layout of Analog and Digital ICs from the block level to the top level. Cadence Virtuoso and Mentor Calibre verification software. Integrated circuit and electronics test and debug. Knowledge of common image artifacts and contributing factors. Knowledge of non-uniformity sources and correction methods, 3-D noise analysis. Familiarity with camera electronics and software. Documentation, communication and analysis skills.

Preferred Additional Skills:

Experience with large, stitched-die designs

Unique Skills:

Live aircraft experience preferred.

You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a Laser tracker Toolmaker, you will be responsible for leading the production of tools and specialized parts and devices used in the production of spaceflight hardware at. Support with be provided to cover a very wide range of products from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. The work requires practical skill and knowledge as a Toolmaker to analyze specifications, lay out stock, set up and operate machine tools, and fit and assemble parts to make and repair tools, jigs, fixtures, gauges and hand tools. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. The candidate must have the ability to plan the sequence of operation and materials required according to knowledge of computer technology, such as computer aided design, CAD, or computer aided manufacturing, CAM, to design and create instructions for the manufacture tools. The candidate will be required to test and inspect the tools that are created to ensure that they are true to the original design and function properly. The candidate must have excellent communication skills and the ability to problem solve. Candidate must be able to perform incidental tasks as required to complete the larger task.

Must-haves:

Basic knowledge of mathematics, algebra and physics

A minimum of 8 years of combined experience and training similar to that required in a bona fide apprenticeship program as a Tool Maker or Tool and Die Maker; OR eight (8) years of documented Tool Maker or Tool and Die Maker experience; OR five (5) years of documented Tool Maker or Tool and Die Maker experience and three (3) years in a related trade

6 year of experience in operating a laser tracker (Faro, Leica, API or equivalent)

Experience with Computer Aided Engineering tools

Knowledge of engineering principles and practices

Familiarity working in multi-disciplinary teams

Preferred:

Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

Background in the Aerospace and Defense Industry

Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

Ability to:

Work any shift and work overtime, including daily, weekends and holidays as required

Work from blueprints, drawings, layouts or other specifications to plan sequences of operations for fabricating tools or assemblies

Verify dimensions, alignments and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers and dial indicators

Visualize and compute dimensions, sizes, shapes and tolerances of assemblies, based upon specifications

Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines and grinders to cut, bore, grind or otherwise shape parts to prescribed dimensions and finishes

File, grind, shim and adjust different parts to properly fit them together

Fit and assemble parts to make, repair or modify jigs, gauges and tools using machine tools and hand tools

Perform tests with completed tools to ensure that parts meet specifications; make adjustments as necessary

Lift, position and secure machine parts on surface plates or worktables, using hoists, vises, v-blocks or angle plates

Measure, mark and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes and rulers

Cut, shape and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rulers and hand tools

Design jigs, fixtures and templates for use as work aids in the fabrication of parts or products

Set up and operate drill presses to drill and tap holes in parts for assembly

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

General Duties: Responsible for developing installation requirements, technical information, airframe production installation/fabrication drawings, engineering instructions, and related production guidance materials as it pertains to the mechanical and structural aspects of a modification program.

Essential Job Functions:

Proficient in engineering design for aircraft modification programs; Proficient in designing details, assemblies, and installation drawings; Develop 3-D models and 2-D drawings to support the installation of mechanical and structural provisions; Capable of leading complex design task; Participate in engineering design feasibility studies; Participate in creation of stress analysis reports; Participate in internal design reviews;

Skills and Experience:

Two (2) years or more of aerospace engineering or design experience; Familiar with 3D CAD modeling and drafting software (SOLIDWORKS required), and FEA (NASTRAN or AutoCad preferred); Proficient with MS Office.

Education:

2+ years of aircraft design experience.

Must have knowledge of SolidWorks as a drafting tool.

They will be updating aircraft structural models based on analysis provided by Stress Engineers.

Must be capable of selecting materials (from a short list of allowable aluminum alloys) appropriate to meet or exceed the required material properties defined by the stress analysis.

Must be able to calculate edge and pitch distances for each fastener drawing update.

Working in Oklahoma City is necessary.

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Details:

Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

The ROIC Layout Designer is a highly skilled and experienced senior support individual contributor who will work with design architects and engineers to implement circuit schematics in physical mask layout. This position will also be responsible for floorplan, chip layout, routing and physical verification, as well as supporting and assisting in tapeout.

Desired Skills:

Bachelor's Degree in engineering or science discipline from an accredited university with a minimum of 4 years of prior relevant experience or an equivalent combination of education, training, and experience. Proven ability of layout in Silicon with some or all of the following: opamps, pll, adc, lvds. Must have experience in using Skywater, On Semi, and related foundry processes. Must have experience with the following EDA tools: Cadence Virtuoso, Mentor Calibre

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, engineer, layout, design,

Scientist Electrical Engineer ROIC Architect

We are looking for someone who has experience in designing and architecting custom readout integrated circuits (ROICs) in state of the art image sensors. As ROIC Architect, you will specify, architect, and design analog and digital integrated circuit designs for readout ICs.

Essential Functions:

The ROIC Architect will serve as primary technical point of contact representing ROIC expertise across multiple integrated program teams. In this capacity, responsibilities will include capturing requirements in formal documentation, interfacing with sub-contract design vendors, and leading design reviews. You will provide technical direction to ROIC design team while directly contributing to the design effort.

As a key member on a growing team, you will be involved in all aspects of design including block-level design and simulation, chip-level architecture and verification, layout and physical verification, and silicon validation and characterization. The ideal candidate will have ROIC-specific design experience and a demonstrated willingness to mentor other engineers.

Qualifications:

Bachelor's Degree and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. Position requires the ability to obtain and maintain a DOD Security Clearance, which requires U.S. Citizenship. Proven ability to understand system-level performance requirement and reduce to ROIC chip-level requirements Design lead or architect on three or more ROICs Experience designing two or more of: High speed differential I/O, A-to-D converters, bias generation, analog buffers, serializers, readout pixel unit cells Custom layout of Analog and Digital ICs from the block level to the top level Cadence Virtuoso and Mentor Calibre verification software Integrated circuit and electronics test and debug Knowledge of common image artifacts and contributing factors Knowledge of non-uniformity sources and correction methods, 3-D noise analysis Experience with large, stitched-die designs is a plus Familiarity with camera electronics and software Documentation, communication and analysis skills

Preferred Additional Skills:

Experience with large, stitched-die designs