Job Search Results

170 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 08:43AM Pacific Time by ContractJobHunter. )

Listings 1 - 170

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Conroe, Texas.
Job Overview:
A&P Mechanics will be providing heavy maintenance on Hawker, Lear, King Air and smaller piston aircraft so experience with each is preferred but not required.
Qualifications:
A&P mechanic with a minimum of 3 years’ experience performing MRO or line maintenance in a GA or Corporate, military or regional environment.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer
 
Job Number: 48195
Job Location: Conroe, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in El Paso, Texas.
A&P Mechanic Responsibilities:
Perform required maintenance on company aircraft.Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Need A&Ps with minimum of 2 years experience and/or any Regional GenFam training
Must have at least 2 years of CRJ 900 experience (If you have CRJ GenFam, the experience requirement may be waived).
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings.
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 46835
Job Location: El Paso, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanic in Macon, Georgia!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Job Duties:
Will be working a Wi-Fi project, as well as other projects and heavy checks as they come in
Qualifications:
At least 3+ years’ experience on Regional or Commercial aircraft in an MRO setting
An A&P License is required
Open to Military candidates; however, any military candidates should have phase maintenance and depot level experience
Also open to candidates with Line Maintenance experience, but only if it is mixed with MRO experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 44470
Job Location: Macon, Georiga
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0008 on application.



Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BHJOB28358_56
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Technicians

Description:
STS Technical Services is hiring Aircraft Interior Technicians in Nashville, Tennessee!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Essential Duties & Responsibilities:
Will be performing backshop work as well as interior composite repairs on aircraft
Qualifications:
At least 3 years experience on Regional or Commercial aircraft in an MRO setting.
STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 47583
Job Location: Nashville, TN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Analyst (Secret Clearance)

Description:

Administrative Notes:




  • Clearfield, CT

  • $70 to $80/HR - based on experience

  • Active Secret Clearance issued by the DoD

  • Contract

  • 1 Year with option for extension

  • 1 Opening

  • Reason for Opening(s): Growth



 



Role description & Responsibilities:




  • Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.

  • Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

  • The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements.

  • Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.



 



Experience Requirements:




  • **MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)**

  • BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.

  • Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction

  • Knowledge of composite materials and manufacturing processes

  • Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team



 



Experience Preferred:




  • Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable

  • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation


 
Job Number: 9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrator

Description:
Contract Administrator

Rome, NY
$29/hr
3 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Contracts group supporting Industrial Programs has an immediate need for a Contracts Administrator in its Rome, NY site. The successful candidate will be responsible for all facets of contract administration on development and production programs for industrial end users.

Duties include, but are not limited to: receipt, review, and processing of customer solicitations/RFPs; proposal preparation; review and negotiation of contract terms and conditions; preparation of contract documents including non-disclosure agreements and memoranda of agreement; order reviews and acknowledgments; order entry; forecasting the demand for particular products to drive supply chain activities; managing customer demand by analyzing trends, managing forecast tools, and maintaining accurate data; flowdown of contract requirements to internal stakeholders; change management; identification of contract and business risk; accounts receivable support/reporting; audit support; and contract close out as well as company initiatives including ACE, standard work and business financial goals.

This position requires a Bachelor's degree plus 3 years experience relevant to Contract Administration. In the absence of a degree, 7 years of relevant experience is required.

Ideal candidate will:
• Have exceptional written and verbal communication skills
• Be able to effectively communicate with all levels of employees and management
• Possess strong analytical and problem-solving skills
• Be highly efficient and self-motivated
• Always be professional
• Adhere to policies and implement changes as required
• Adapt to competing work priorities
• Have a strong focus on continuous improvement
• Maintain a keen focus on results
• Have SAP experience
• Have proficiency in software programs such as: Microsoft Office Word, Excel, PowerPoint and Outlook.
 
Job Number: 11155
Job Location: Rome, NY
Rate: 29.00
Per Diem: No
Overtime: Possible
Duration: 3 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Definition and Analysis Engineer - Civil Aircraft Operation Scenario

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Definition and Analysis Engineer for Civil Aircraft Operation Scenario.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0001 on application.



Responsibilities:


Define the method and process for aircraft operation scenario definition.
Define the civil aircraft operation scenario database.
Define the method and process for function analysis based on scenario.
Make the best practise for function analysis based on scenario.
Train other engineers in Civil Aircraft Operation Scenario definition and analysis.


Skills/ Qualifications / Experience Sought:

Bachelor and above.
10 years experience for aircraft and system design.
10 years experience for civil aircraft operation or research.
System Engineering background and especially for function analysis.
Be familiar with SysML language.
Fluent English with good communication skills.
 
Job Number: BHJOB28358_63
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Electrical M.E.:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
-Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
-Develop the specific methods and instructions for manufacture and/or assembly of products.
-Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
-Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Job Details:
Education / Certifications BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required.

Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 10999
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environment Effects (E3) Protection Engineer

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0003 on application.



Responsibilities:

Instruct team member on the review of documents about equipment/system
level Indirect Effects of Lightning(IEL)/High Intensity Radiated
Fields(HIRF)/EMC compliance verification.

Instruct the documentation and verification of system level IEL/HIRF tests.

Lead the team to conduct troubleshooting of electromagnetic interference
onboard.

Instruct aircraft level lighting/HIRF/EMC test verification.
Compile aircraft level E3 design requirements.
Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
Establish aircraft level E3 design and verification procedure.


Skills/ Qualifications / Experience Sought:

10+ years' experience in E3 protection design and verification of aviation
field and rich experience in type certification.

Experience in system level lightning and HIRF verification.

Experience in aircraft level E3 design requirement; intensive study in aircraft
electromagnetic protection technique.

Experience in electromagnetic protection for composite fuselage.

Education background in EMC, electromagnetic field and microwave,
electronic engineering or other relevant subjects.

Familiar with relevant design method and procedure of electromagnetic
protection for composite material aircraft. Participated in electromagnetic
protection design of relevant type. Civil aircraft project is preferred.

Familiar with airworthiness regulations of E3 for civil aircraft. Full
participation in the type certification credit procedure desired.

Master EM simulation and have experience of aviation program are
preferred.

Good communication and written skills in English.
 
Job Number: BHJOB28358_61
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer (Power Plant or Energy/Waste or Related Industries)

Description:
Facilities Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Indirect Buyer Specialist

Description:
JSG is hiring an Indirect Buyer Specialist in Trumbull CT for a 12+ month contract

Responsibilities:

Responsible for the delivery, cost, and quality of their respective repair vendors
Analyst must take ownership for all vendors within their jurisdiction from a strategic and transactional vantage point
Maintain open repair orders and issue supplier performance reports as needed
Negotiate pricing and contractual terms
Manage supplier relationships and performance issues
Expediting and coordinating material requirements to suppliers for repaired Trumbull components.
Manage the return and speedy replacement of defective materials
Review and qualify new and existing suppliers as needed.
Managing communication with customers related to pricing, contract flow down, civil airworthiness certification, quality and delivery
Monitor supplier portal to ensure suppliers are properly maintaining commit dates
Make recommendations to suppliers to enable them to better serve and conduct business in a co-operative and ethical manner to achieve departmental and company business objectives as defined by management
Manage weekly metrics and goal
Education/Experience:

Bachelors’ Degree
Demonstrated ability to proactively manage and organize multiple priorities in a fast-paced environment
3-5 years’ experience in working with external vendors and setting performance standards of excellence
Previous experience with SAP ERP system a Plus but not a requirement
Ability to influence and aggressively hold suppliers accountable to established performance metrics
Identifying Process improvements using LM Enterprise Excellence Continuous Process improvement principles & methods
Focus on results and be proactive
 
Job Number: 374497
Job Location: Trumbull, CT.
Per Diem: Split if Qualified
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Location: Appleton, WI
Rate: $28.23 - $31.37/HR
Duration: Long Term Contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Education and Experience Requirements:
1. Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles.

Principle Duties and Responsibilities:
Essential Functions:
1. Support analysis with area Management to establish and maintain daily work activities.
2. Support analysis with area Management, support staff, and Material Control to design and maintain part presentation requirements and procedures.
3. Assist in identification of equipment, machinery, and facilities acquisition including justifications and economic analysis to support Operational, Safety and Quality initiatives.
4. Assist in development and maintenance of Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
5. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.)
6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
7. Support all Safety, Sustainability and Ergonomic initiatives as required.
8. Implement plant layout, process flow, and material handling techniques.
9. Support area Management in generating orders/requests for Tooling including management of tool priorities.
10. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.

Additional Functions:
1. Develop and maintain work place methods and manpower requirements.
2. Assist in the training and development of entry-level industrial engineering personnel.
3. As required, aid in development and maintenance of Business Continuity Plan.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Ability to read and interpret engineering models and facility layouts.
3. Ability to operate computerized equipment, such as personal computers, CATIA, etc.
 
Job Number: 11065
Job Location: Appleton, WI
Rate: $28.23-$31.37/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer / no clearance SC

Description:
165386
1751-1 Industrial Engineer

Work Location: Greenville, SC
Status: Open
Qty: 1
Desired Start Date: 7/15/2019
End Date: 7/14/2020

Job Description :
The Industrial Engineer analyzes sequence of operations, work flow, and manpower loading to improve efficiencies in both F-16 aircraft production and sustainment environments, as well as Warehouse Operations for Greenville Site Operations.

Studies and completes data analysis pertaining to production and sustainment performance, cost control, cost reduction, and other related production systems using tools like Microsoft Excel, Access, PowerPoint, OneNote, Project, or data analysis tools. On the basis of these studies, monitors the development and implementation changes to production workflow, manpower changes, or changes to the schedule. Develops detailed work plans in collaboration with Operations Leadership team. Establishes methods for maximum utilization of production personnel. Facilitates continuous improvement activities as required. Completes other projects as assigned.

Qualifications :
Bachelor's degree from an accredited college with at least 3 years of Industrial Engineering-related experience

Advanced Microsoft Excel and PowerPoint experience, specifically in creating, monitoring and reporting metrics related to cost and schedule.

Experience developing resource loading plans and/or manpower plans

Experience in scheduling, with an understanding of critical path methodology

Desired skills :
Bachelor's degree in an Engineering related discipline

Experience with Systems, Applications and Products (SAP)

Excellent communication skills (verbal, written and presentation)

Ability to multi-task, organize and prioritize assignments

Experience in applications of learning curves

Greenbelt Certified

Aircraft Production, Maintenance, Modification, Repair and/or Overhaul Experience

Earned Value Management (EVM), an understanding of Schedule Performance Index (SPI) and Cost Performance Index (CPI)

Pay Rate: $31.00 Hourly

Areas of Expertise Industrial Engineering Yes 1 2 - 4 Years
Areas of Expertise Project Scheduling No 5 < 1 Year Software Skills MS Excel Advanced Yes 1 2 - 4 Years Software Skills MS Powerpoint Advanced Yes 2 1 - 2 Years Software Skills MS Access Beginner No 7 < 1 Year Software Skills SAP No 5 1 - 2 Years Technical Skills Metrics Yes 2 1 - 2 Years Technical Skills Earned Value Analysis No 4 < 1 Year
 
Job Number: JE-1751-1
Job Location: Greenville, SC
Rate: 31/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration: 6 Months


Job Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: D26-Mfg Industrial Engrg
 
Job Number: 19-04634
Job Location: Berkeley, MO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 7/19/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_70
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:






Administrative Notes:




  • Clearfield

  • OPEN Rate

  • Active Secret Clearance issued by the DoD. Last investigation with in the last 4.5 years.

  • Contract

  • 1 Year+ with option for extension

  • 1 Opening

  • Reason for Opening(s): Growth



 



Job Description:




  • Northrop Grumman Innovation Systems is seeking a Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.



 



Responsibilities:




  • Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs

  • Concepts and designs special tooling within an Integrated Product Team structure

  • Manages tooling technical, quality and schedule

  • Uses and/or manages Computer Aided Design (CAD) resources for tooling design

  • Works with vendors to ensure successful fabrication of tooling

  • Witnesses source inspection of special tooling at fabrication locations

  • Proofs tooling upon receipt

  • Maintains tooling documentation related to design, fabrication and proofing

  • Provides tooling estimates for new tools



 



Education and Experience Requirements:




  • BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years' experience with BS or 0 years' experience with MS in engineering.

  • Preference given to candidates with experience in an aerospace manufacturing environment.

  • DoD Secret Clearance required

  • Design experience using 3D CAD systems (CATIA V5, NX) preferred

  • NX experience preferred over CATIA V5

  • Closed form and/or FEA stress analytical capability preferred

  • Experience with project management including budget, schedule and technical

  • Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies

  • Experience with general metallic fabrication including welding, machining, and forming.








 
Job Number: 9271216
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S9271216

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S9271216
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S9271216
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Understanding all configuration definition and cost impacts in support of change pricing for non-recurring & recurring change pricing proposals including fact-finding, renegotiations, and support of various supplier contractual obligations with cost and pricing implications.

Cost non-recurring and recurring estimates for nacelle & pylon products in support of the procurement organization for supplier contract pricing proposals and claims.
The supply chain estimator is also expected to provide input to, use and understand cash flow models related to supplier proposals. Documentation of assumptions and systematic revision control of source data related to their estimates is required.
Perform comparative cost analysis for Sr. leadership and Passport reviews.


Qualification:
* Knowledge of SAP, Team Center & Catia V5.
* Strong interpersonal & emotional intelligence skills; team player and ability to work with a broad base of technical, operations and finance peers at various levels of the organization.
* Familiarity with product structure & reading engineering drawings and Catia Models.
* Understanding of labor & overhead rates, standard-to-actual ratios, & material factors.
* Concise communication skills, planning, and organizational skills
* Understanding of Continuous improvement and labor learning impact.
* Understanding of data analysis methods and data organization
* Ability to create labor routers and BOMs
* Comfortable working with ambiguity and solving problems
* Ability to assist in the Basis of Estimate (BOE) development, implementing pricing assumptions, and preparing a complete pricing proposal.

Required Skills:
* 3-5 years of experience in a cost estimating or manufacturing engineering capacity.
* Sound reasoning and mathematical skills including an understanding of labor learning curve theories.
* Understanding of non-recurring and manufacturing labor processes and material utilization.
* Ability to rationalize RFP requirements into product cost implications.
* Strong understanding of cash flow modeling and financial analysis metrics, and confidence with explaining modeling scenarios implications and analysis.
* Ability to deal with stress and a flexible work schedule during tight deadlines.
* Excellent computer skills: Microsoft Office products (EXCEL, PowerPoint, & Word).
* Ability to design and implement SAP BW reporting tools.

Preferred Skills:
* The ideal candidate would have 3-5 years in an aerospace cost estimating or manufacturing engineering background familiar with broad aerospace manufacturing product flow, work instructions, tool families, engineering and testing requirements, cash flow modeling.
* Good knowledge of proposal pricing business practices cost accounting standards and appropriate application.
* Sound reasoning skills and ability to work with a broad base of technical, operations, aftermarket, finance and sr. leadership.

Education:
* Bachelor's Degree in Finance/Engineering (Manufacturing/Industrial)
* MBA a plus
 
Job Number: 49961
Job Location: Chula Vista, CA
Rate: 48.50
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Machine Maintenance Expert - China

Description:
NC Machine Maintenance Expert - China.

Our Aerospace client in China require an NC Machine Maintenance Expert, to work with them in China.

Job Role:

The ideal candidate will be responsible for production line development, system testing, debugging, maintaining and providing technical guidance.

They will analyse the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions.

They will be responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle.

Following up the project progress in time, leading the team to solve the problems that are related to the site production line, ensuring the project is completed on time.

Be responsible for intelligent manufacturing & AI research subjects application.

Be responsible for intelligent manufacturing information management and programming.


Qualifications & Experience:

Bachelors graduates or above, with more than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development.

Familiar with R&D, production, management process in the aeronautical field.

Familiar with organisational intelligent manufacturing related to equipment software, hardware technology and organisational information management software.

Proficiently program the equipment control system of intelligent manufacturing.

Experience of Leading organisation intelligent manufacturing.

Experienced in intelligent manufacturing and industrial robotics is preferred.

Familiar with information system or software development, programming

Experience with Siemens, Heidenhain and Fanuc machine system setting up, PLC modification and optimisation and overseas working experience is preferred.


Please quote ref JO0000000254 on application.
 
Job Number: BHJOB28358_10
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/07/19
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NJ Based Bridge Engineer

Description:
*This is a Full time permanent position located in Mount Holly NJ*
*Candidates must live or are relocating to within 1 hour of job location*
*Full benefit package and bonus are included*



We are hiring for a Permanent NJ based Structural Bridge Engineer. Candidate will be responsible for the full gamut of completing a bridge project [from conventional grade separations to major, complex river crossings, trusses, arches, box girders and cable-stayed bridges] conceptualization to RFI/RFP to specification and material design and development to inspection and completion.



Daily duties might include working with teams to create and submit an RFI/RFP, design with design teams, meeting with customers/site visitations, developing plans/bid packages, cost estimating, creation and maintenance of schedules and milestones, impact studies, researching and obtaining permits, help with QC/QA documentation, Working with NJDOT as needed, creating and presenting reports to management and local/Gov’t entities, etc.



Required:

*5-10 years’ experience working as a bridge/highway construction engineer.

*Strong design experience, using AutoCad 2013 or higher; understanding of manual drafting.

*BS in Civil Engineering

*New Jersey licensed EIT



Pluses:

*NJ PE

*CBSI certification
 
Job Number: 924
Job Location: MT Holly, NJ
Rate: $75-$100 DOE
Per Diem: no
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer (Fairfax EfW facility) - Lorton, VA
Location: Lorton, VA

Job Dscription:
Plant Operations Engineering:
• Monitor boiler and turbine performance daily.
• Regular (weekly) facility performance review meetings with Ops Dept.
• Identify areas for improved production and reduced cost, lime usage, boiler cleaning, steam plant line up’s, etc.
• Monthly Operating reports submittals
Boiler Reliability Engineering
Participating in boiler outage inspection services at the facility both during forced and scheduled outages.
• Assist in the preparation of outage planning defining inspection scope, schedule, costs and resource requirements.
• Preparation of Condition Assessment Reports with executive

summary.
• Inspection data compilation, analysis and presentation.
• Develop and revise standard specifications for outage work scopes.
Predictive Maintenance Program Technical Support
Providing engineering support to the facility Maintenance Supervisor for mechanical equipment predictive maintenance program.
Asset Improvement Project Engineering and management; providing engineering for asset improvement project development and execution.
• Coordinate with Regional Engineering Manager for resource support and design review when required.
• Develop work scopes, solicit bids and execute projects.

Technical Standards
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare exception requests of technical standards.
• Prepare Facility Change Notice (FCN) documents for facility changes or improvements. Coordinate engineering review process reviews of all facility FCN’s

Position Requirements
The position requires a degree in engineering and a minimum of 1-3 years of power plant or related industrial experience and a technical background in solid fuel boiler and steam turbines.
Must be proficient in Microsoft Excel, Word and Power Point. Auto Cad experience a plus.


HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantVA
Job Location: Newark, NJ
Rate: $105K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Industrial Engineer LA

Description:
165489
Principal Industrial Engineer (Job Number: 19019150)

Number of Openings: 1

Location(s): United States-Louisiana-Lake Charles


Shift: 1st Shift

Target Start Date: Aug 5, 2019

Target End Date: Oct 7, 2019

Pay Rate: $48 to $50/hr

Work Schedule: 9/80

Duration of Assignment: 2 Months

Aerospace Systems has an opening for an Industrial Engineer to join our team of qualified, diverse individuals. This position will be located in Lake Charles, Louisiana.

The selected candidate will be responsible for:

- Analyzing and designing sequencing of operations and work flow to improve efficiencies at suppliers;
- Establishing methods for maximum utilization of production processes and personnel.
- Participate in assessment of suppliers and all phases of production operations.
- Conducts studies pertaining to supplier production control, work flow, cost control, cost reduction, inventory control, and production record systems.
- Based on the results of the above mentioned studies the successful candidate will recommend develop and implement plans and programs, modifications and revisions to operating methods.


Basic Qualifications:

B.S. degree in a STEM (science, technology, engineering, mathematics) plus at least 5 years of experience or a Master Degree plus 3 years of experience.
Demonstrate experience with the Microsoft Office Suite; and Microsoft Project.
Able to work in both external and internal environmental conditions.

Preferred Qualifications:

Manufacturing experience with offsite suppliers.
Demonstrate ability to analyze supplier manufacturing capability and characteristics
 
Job Number: JK-1785
Job Location: Lake Charles, LA
Rate: 50/hr max
Duration: 2 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality MRB Engineer (Secret Clearance)

Description:

Administrative Notes:




  • Clearfield

  • OPEN Rate

  • Active Secret Clearance issued by the DoD. Last investigation with in the last 4.5 years.

  • Contract

  • 1+ Year with likelihood of extension

  • 2 positions for 1st shift. 2 positions for 2nd shift (3:00pm to 11:00pm)

  • Reason for Opening(s): Growth



        



Job description:




  • Seeking a Sr. Principal Mission Assurance Engineer to provide support to our ACS Program Team.



 



Role description & Responsibilities:




  • Candidate will work in an industrial environment and support solving complex engineering problems.

  • Will effectively interact with design engineering team and provide support across Factory Value Streams, Materials and Process experts, Process engineering, and Tool Design.

  • Candidate is responsible/certifies all certified tooling requirements. Routinely coordinates technical issues with various programs and customers.

  • Candidate works independently, leads certified tooling team member, senior member of Tool and Gage committee, and provides direction for certified tooling maintenance and repairs



 



Requirements & Qualifications:




  • Active Secret DoD Clearance within 4 ½ years of last investigation

  • Bachelors Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 5 years of applicable experience

  • Experience in working with aerospace specifications and drawings

  • Experience supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment

  • Knowledge of root cause / corrective action processes and techniques

  • Functional knowledge of production control systems (SAP/Visual Mfg/etc)

  • Experience in supporting MRB processing



 



Preferred Skills and Experience:




  • Composite processing experience

  • Experience in Quality Assurance and processing MRB

  • Understanding of AS9100 requirements


 
Job Number: 9271004
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Requirements Management Engineers - Aircraft - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require Requirements Management Engineers.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0002 on application.



Responsibilities:

Responsible for Requirement Management Planning and tools.
As expert to support the requirement improvement, validation and verification work.
Participate in team decision-making and provide support and collaboration for the team.

Skills/ Qualifications / Experience Sought:

Bachelor or above degree.
Rich experience in Requirement Management of civil aircraft or onboard products (at least 15 years experience in relevant fields).
Proficient in requirement management and processes of civil aircraft.
Capable of leading the team to develop requirements on the requirement management platform and tools according to project requirements.
Familiar with the information architecture of interface files of large civil aircraft.
Familiar with the methods and techniques of aircraft interface definition and validation.
Proficient in IBM Rational Doors and its development language DXL, with relevant tool development experience.
Fluent English with good communication skills.
 
Job Number: BHJOB28358_62
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Controls Engineer

Description:
JSG is hiring a Senior Controls Engineer in Monrovia CA

Responsibilities:

Ability to analyze complex data and present to management and engineers in understandable discussions
This requires strong technical and social aptitude for written and verbal communication
Identify obstructions and issues early to Project Managers and Management
Plan with System Engineering Manager and V.P. of Operations and Systems methods for long term Systems Group sales growth and cost reductions with improved quality
Complete pre-sale conceptual design, schedule, and cost estimation of software, electrical, and mechanical for semi-automated and fully automated industrial processing workstations developed from communication with customers
Implement HMI and GUI integration for system operation, motion control, laser control, resistance welder control, machine vision (Cognex), data collection and analysis, file management, and networking capabilities
Develop Structured, re-useable low-level and high-level motion control system code for Delta-Tau, Aerotech, Allen Bradley, and similar motion systems implementing controls and I/O functions.
This requires a strong background in motion control and S.T.E.M.
Supply mechanical design suggestions for robust operation to mechanical engineers for detailed design implementation
Create Software Design Specifications (SDS) and Hardware Design Specifications (HDS) based on User Requirements Specifications (URS), purchase orders, quotations, sales orders, and any additional compliance documents
Build, develop, and evaluate prototypes for automation and control systems based on detailed SDS and HDS
Develop laser optics path and vibration isolation designs with input from Applications and Advanced Technology Departments and customer application results
Directly responsible for ensuring continuous Systems robotics, vision, motion control, and pick & place improvements
Experienced in kaizen methods applied to engineering and controls is a plus
Education/Experience:

Knowledgeable in software design tools and environments including .NET, Visual C++, C#, current Experience in C# is a plus. Fundamental background in Software Engineering.
Four-year degree in computer science, engineering, physics, or related discipline required. Masters Electrical engineering, Automation or Control Engineering preferred.
8 years+ experience in designing custom motion control, HMI, robotics, pick & place, and hardware for automated control systems.
3 years+ experience in designing custom machine vision applications preferred.
Experience with lasers and optics helpful
Electrical engineering design experience; Solidworks Electrical is a plus.
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion, longer-term projects.
Preferred applicants will have experience in DLL generation for selected software-controllable systems components
 
Job Number: 374344
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structural / Stress Engineer (MADYMO experience required)

Description:
This position will support Product Development Teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to the engineering team based upon analysis results. This position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.

Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer-term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem-solving skills
 
Job Number: 1910102563
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer

Description:
JSG is hiring a Senior Systems Engineer in Monrovia CA

Responsibilities:

Pre-sale conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations
Detailed design of tooling, fixtures, layout of motion control components and other peripherals, electromechanical packaging
Conduct acceptance testing leading to customer sign-off on selected projects
Project management role for selected projects from purchase order to shipment.
Assume primary responsibility for the successful completion of assigned projects.
Oversee construction and maintenance of design file and user documentation for complete system
Prepare engineering input for product release and support by other departments
Cost estimation includes estimation of NRE, RE, and direct material for custom portions; discussion with the Production manager for estimation of assembly and test labor for custom portions. Cost estimation summary is delivered to the Proposal Manager
Project schedule development using critical path method exemplary covering all tasks from PO to shipment including those for which others are responsible for performing. The project schedule is delivered to the Proposal Manager
Represent the company in a professional manner to the customers, vendors, and other people and organizations outside the company.
Coordinate acceptance test requirements, sample materials, laser application, machine readiness, customer visit schedule, and lab resources for acceptance tests. Manage acceptance test and handle all exceptions necessary to secure customer sign-off.
Specify design verification test requirements, and conduct, review and approve the results of such tests.
Prepare and conduct audience-appropriate design reviews to customer, engineering and management personnel
Ability to travel occasionally (2 weeks per quarter)
Provide technical supervision to designers and assembly technicians assigned to the project.
Team Management as required
Education/Experience:

Four-year degree in Engineering
Formal project management training and experience
Communicate well orally and in writing with customers and others with whom he/she works within and outside the Engineering department.
Able to prepare and deliver professional technical and educational presentations
Work experience using SolidWorks, machine tools, and mechanical metrology equipment
Practical experience with professional engineering design and document control methodology
Demonstrated ability to design for long term support and modification
Three years+ experience in designing or specifying tooling, fixtures, the layout of motion control components and other peripherals, electromechanical packaging as found in industrial automation systems
 
Job Number: 374336
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer IV

Description:
The Structural CAD Designer will prepare predominantly civil, structural and architectural detail drawings. Will work with Structural Engineers to produce drawings required to perform structural modifications to new and existing launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification contracts.

He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

The candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.

Experience/Skills Required
•The successful candidate should have at least (10) years of relevant experience building and/or modifying large industrial facilities.

•At least (10) years of recent Autodesk AutoCAD experience.
•3D modeling and design experience in Autodesk Inventor, Autodesk Revit Structure, Tekla Structures, or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 320
Job Location: Cap Canaveral, FL
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural engineer1

Description:
Basic Qualifications:
0 Years with Bachelors in Science in an Engineering discipline (i.e., Civil Engineering, mechanical Engineering, Naval Architecture, Ocean Engineering Aeronautical Engineering)
Preferred Design Disciplines:
Finite Element Analysis and Hull Scantling Analysis experience
Job Description:
Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
 
Job Number: 07012019-10Z
Job Location: Pascagoula, MS
Rate: $35
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: today
Input Date: 11/14/2020
Firm Name: TASC TECHNICAL SERVICES
Attention: Mark
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Cost Estimator

Description:
Location: Chula Vista, CA
Rate: $48.50/HR
Duration: 8 month contract
Per Diem Split or Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Job Description:
1. Understanding of all configuration definition and cost impacts in support of change pricing for non-recurring & recurring change pricing proposals including fact-finding, renegotiations, and support of various supplier contractual obligations with cost and pricing implications.
2. Cost non-recurring and recurring estimates for nacelle & pylon products in support of the procurement organization for supplier contract pricing proposals and claims.
3. The supply chain estimator is also expected to provide input to, use and understand cash flow models related to supplier proposals.
4. Documentation of assumptions and systematic revision control of source data related to their estimates is required.
4. Perform comparative cost analysis for Sr. leadership and Passport reviews.

Qualification:
1. Knowledge of SAP, Team Center & Catia V5.
2. Strong interpersonal & emotional intelligence skills; team player and ability to work with a broad base of technical, operations and finance peers at various levels of the organization.
3. Familiarity with product structure & reading engineering drawings and Catia Models.
4. Understanding of labor & overhead rates, standard-to-actual ratios, & material factors.
5. Concise communication skills, planning, and organizational skills
6. Understanding of Continuous improvement and labor learning impact.
7. Understanding of data analysis methods and data organization
8. Ability to create labor routers and BOMs
9. Comfortable working with ambiguity and solving problems
10. Ability to assist in the Basis of Estimate (BOE) development, implementing pricing assumptions, and preparing a complete pricing proposal.

Required Skills:
1. 3-5 years of experience in a cost estimating or manufacturing engineering capacity.
2. Sound reasoning and mathematical skills including an understanding of labor learning curve theories.
3. Understanding of non-recurring and manufacturing labor processes and material utilization.
4. Ability to rationalize RFP requirements into product cost implications.
5. Strong understanding of cash flow modeling and financial analysis metrics, and confidence with explaining modeling scenarios implications and analysis.
6. Ability to deal with stress and a flexible work schedule during tight deadlines.
7. Excellent computer skills: Microsoft Office products (EXCEL, PowerPoint, & Word).
8. Ability to design and implement SAP BW reporting tools.

Preferred Skills:
1. The ideal candidate would have 3-5 years in an aerospace cost estimating or manufacturing engineering background familiar with broad aerospace manufacturing product flow, work instructions, tool families, engineering and testing requirements, cash flow modeling.
2. Good knowledge of proposal pricing business practices cost accounting standards and appropriate application.
3. Sound reasoning skills and ability to work with a broad base of technical, operations, aftermarket, finance and sr. leadership.

Education:
1. Bachelor's Degree in Finance/Engineering (Manufacturing/Industrial)
2. MBA a plus
 
Job Number: 11162
Job Location: Chula Vista, CA
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 8 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator 2 CA

Description:
1777 Supply Chain Ops Coord 2 (Job Number: 19016632)

Number of Openings: 2

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jul 1, 2019

Target End Date: Jul 1, 2019

Number of openings: 2

Location: El Segundo

Schedule: 5/40

Pay rate: $20.00 - $23.00

Duration of assignment: Up to 1 year

Clearance: None

Essential Functions:


Supports and assists activities within multiple disciplines across the Supply Chain process. Provides administrative, tactical and execution support in various aspects of the industry standard supply chain business process areas primarily Supply Chain Planning and Supply Chain Sourcing, as well as Supply Chain Business Operations.
•Utilize WIP reports to expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules
•Coordinate with Manufacturing to assist in prioritizing WIP to ensure contractual schedule dates are met
•Utilize knowledge of production requirements to coordinate with other shop support teams (Manufacturing Engineering, Quality, MRB, Industrial Engineering, Shipping, Distribution, etc.) to initiate actions to remove any constraints to production
•Perform necessary SAP and MES system transactions to release work orders for Manufacturing, receive parts into inventory, close out manufacturing work orders, and issue parts up to next higher assemblies
•Create and prepare shippers/manifests for parts leaving the facility and being transported to the customer or other internal sites

Basic Qualifications:

•High School Diploma or equivalent
•2 years’ experience in a Production, inventory or customer service environment, including tracking of parts, materials, tool usage requirements and processing customer requests
•Proficient in Microsoft Word, Excel, PowerPoint and Outlook


Preferred Qualifications:

•BA/BS degree
•Working knowledge of ERP systems
 
Job Number: JK-1777
Job Location: El Segundo, CA
Rate: 23/hr
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator 2 CA

Description:
1782 Supply Chain Ops Coordinator 2 (Job Number: 19016586)

Number of Openings: 2

Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach

Shift: 1st Shift

Target Start Date: Jul 6, 2019

Target End Date: May 29, 2020



Number of openings: 2

Pay rate: $20.00

Location: Manhattan Beach, CA

Schedule: 9/80

Duration of assignment: Up to 1 year

Essential Functions:

Supports and assists activities within multiple disciplines across the Supply Chain process. Provides administrative, tactical and execution support in various aspects of the industry standard supply chain business process areas primarily Supply Chain Planning and Supply Chain Sourcing, as well as Supply Chain Business Operations.
•Utilize WIP reports to expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules
•Coordinate with Manufacturing to assist in prioritizing WIP to ensure contractual schedule dates are met
•Utilize knowledge of production requirements to coordinate with other shop support teams (Manufacturing Engineering, Quality, MRB, Industrial Engineering, Shipping, Distribution, etc.) to initiate actions to remove any constraints to production
•Perform necessary SAP and Solumina system transactions to track and status work orders for Manufacturing, receive parts into inventory, close out manufacturing work orders, and issue parts up to next higher assemblies
•Create and prepare shippers/manifests for parts leaving the facility and being transported to the customer or other internal sites
•Assists in determining possible and actual shortages may initiate action to correct these deficiencies



Basic Qualifications:
•High School Diploma or GED
•2 years' experience in a Production Environment, including tracking of work order, parts, materials, and tool usage requirements
•Proficient in Microsoft Word, Excel, PowerPoint and Outlook

Preferred Qualifications:
•Bachelors Degree
•SAP experience
 
Job Number: JK-1782
Job Location: Manhattan Beach, CA
Rate: 20/hr
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician VA

Description:
165324 Test Technician

Work Site Address: Chesapeake, VA 23323
Job Number: 9292141
Max Pay Rate: 25.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Under Limited supervision performs a wide variety of technical efforts including processes, tests, troubleshoots, and repairs digital equipment. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks. May work on Analog, Digital and/or video type circuits, Radio Frequency, and logic systems. Observes, analyzes and reports test data. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks.

Knowledge, Skills and Experience:
• 4-6 Year Experience testing Analog, Digital and RF circuitry. Ability to read and interpret drawings to perform measurements and troubleshoot electronic equipment. Strong problem-solving skills with the ability to proactively identify alternate solutions to overcome technical challenges.
• Experience using a wide variety electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers.
• Must be familiar with various test equipment general purpose and special, program specific test stations, misc. measuring devices.

Required Education:
High School or equivalent

Work in industrial environment.
• Able to lift 35 lbs unassisted.
 
Job Number: MB-R9292141ATO
Job Location: Chesapeake, VA
Rate: 25/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Catia V5 V4 GD&T / 4 openings! - Clearance CA

Description:
164970
1574-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/4/2019
End Date: 6/2/2020

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Applicants must not have applied for Tool Design at LM-Palmdale in the last 6-mo.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly

Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1574-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years preferred****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.
- Must be US citizen.
- Active/Final Secret clearance.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Active/Final Secret clearance with most recent investigation completed within the last 5-years.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.
 
Job Number: 10969
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Design Fabrication w/Secret Clearance EM

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment tools, dies, gauges, jigs, fixtures, and prototype model parts.

Required:
*Active Secret Clearance
*5+ years experience in manufacturing environment in tool design/fabrication
*Strong experience designing using Catia parts, shapes assembly and draft of workbenches
*Engineering Degree

Preferred:
*Experience with structures, materials, sizing of mechanical, hydraulic or pneumatics
*Aircraft tooling and composites experience
 
Job Number: 190
Job Location: Palmdale, CA
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Upholstery Technicians

Description:
STS Technical Services is currently hiring Upholstery Technicians in Broomfield, Colorado.
Job Duties:
Inspect incoming materials, including leather and other natural materials
Measure, layout, cut and sew various materials including leather, ultra-leather, vinyl and canvas
Sew materials together including leather, hook and loop tapes, scrim and other upholstery foams
Bond materials using various adhesives
Apply and finish wrap materials to seat shrouds and closures
Maintain accurate labor tracking and Job Card/Task sign-offs within the ERP/MRP system
Operate computerized leather cutting machine
Use proper safety equipment and comply with all safety requirements in accordance with company and government standards, rules, and regulations
Qualifications:
High school diploma or general education degree (GED)
Trade schooling related to upholstery or other relevant courses a plus
Three years of upholstery and sewing experience preferably in the corporate aviation completion environment or other high end industry such as yachts, luxury motor coaches, etc
Ability to lift and carry objects weighing up to 40 lbs.; use hand tools, industrial sewing machines, leather splitter/skiver and other specialized equipment
Ability to use measuring tools and perform basic math computations
Must be able to climb ladders and stairs and work in restricted spaces
Regular attendance and willingness to work overtime and other shifts as required
Proficiency in general computer use and MS Office software, including Excel, Word, and Outlook
Must qualify as a U.S. person in compliance with ITAR 22 CFR 120.15
What We Offer:
STS Technical Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.
If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 45432
Job Location: Broomfield, CO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search