Job Search Results

170 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/19 Monday 02:31PM Pacific Time by ContractJobHunter. )

Listings 1 - 170

Go To My Job Tracker

Expand all descriptions

2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 08/08/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Conroe, Texas.
Job Overview:
A&P Mechanics will be providing heavy maintenance on Hawker, Lear, King Air and smaller piston aircraft so experience with each is preferred but not required.
Qualifications:
A&P mechanic with a minimum of 3 years’ experience performing MRO or line maintenance in a GA or Corporate, military or regional environment.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer
 
Job Number: 48195
Job Location: Conroe, TX
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in El Paso, Texas.
A&P Mechanic Responsibilities:
Perform required maintenance on company aircraft.Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Need A&Ps with minimum of 2 years experience and/or any Regional GenFam training
Must have at least 2 years of CRJ 900 experience (If you have CRJ GenFam, the experience requirement may be waived).
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings.
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 46835
Job Location: El Paso, TX
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanic in Macon, Georgia!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Job Duties:
Will be working a Wi-Fi project, as well as other projects and heavy checks as they come in
Qualifications:
At least 3+ years’ experience on Regional or Commercial aircraft in an MRO setting
An A&P License is required
Open to Military candidates; however, any military candidates should have phase maintenance and depot level experience
Also open to candidates with Line Maintenance experience, but only if it is mixed with MRO experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 44470
Job Location: Macon, Georiga
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0008 on application.



Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BHJOB28358_56
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Technicians

Description:
STS Technical Services is hiring Aircraft Interior Technicians in Nashville, Tennessee!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Essential Duties & Responsibilities:
Will be performing backshop work as well as interior composite repairs on aircraft
Qualifications:
At least 3 years experience on Regional or Commercial aircraft in an MRO setting.
STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 47583
Job Location: Nashville, TN
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Aircraft Mechanic
(U.S. Citizenship Required*)
Lexington, KY
2019-9083
Responsibilities:
• Maintain, repair, and modify aircraft structures and structural components of moderate difficulty
• Maintain/repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions
• Apply required expertise in restoring equipment condition and or operation
• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
• Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
• Requires broad knowledge of aircraft sheet metal/structural modifications and repair
• Must have basic knowledge of electrical theory
• Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Requires working knowledge of technical publications.
• Will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
• Must be able to prioritize workload to maintain schedules on assigned projects.

Qualification:
• Interim Security Clearance is required at time of hire. Active Secret Security Clearance is preferred.
• This position supports a 4/10 work schedule.
• Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
• Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience; or Master’s Degree
• Minimum 3 years of experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.
• Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
• MH-60M experience preferred.
• Depot Maintenance Repair experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9083
Job Location: Lexington, KY
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Aircraft Mechanic
(U.S. Citizenship Required*)
Lexington, KY
2019-9089

Responsibilities:
• Repair and modify aircraft structures and structural components of moderate difficulty, maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
• Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Qualification:
• Interim Secret Security Clearance is the minimum requirement to start. Active Secret Clearance is preferred.
• This position supports a 4/10 work schedule.
• Must be able to prioritize workload to maintain schedules on assigned projects.
• Must have basic knowledge of electrical theory
• Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
• Working knowledge of technical publications.
• Broad knowledge of aircraft sheet metal/structural modifications and repair
• Must have experience and ability to operate or perform one or more of the following:
o Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation.
o Must have a common knowledge of tooling required for performance of aircraft structural work.
o Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc.
o Must have fabrication to facilitate plane side repairs.
• Must have advanced Sheetmetal skills that can work with little direction on complex modifications.
• Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
• Must have a high school diploma, or equivalent.
• Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
• Depot Maintenance Repair experience
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience; or a Master’s Degree
• Minimum 3 years intermediate level aircraft repair or modification experience required.
• Minimum 3 years of experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58. MH-60M experience preferred.
• Documented Military/DOD Service School or Civilian/FAA equivalent training desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9089
Job Location: Lexington, KY
Duration: 3 Months
Input Date: 07/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Clearance KY

Description:
165377
Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 07/11/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Cartersville, GA.  
Please reach out to Mindy Jones mjones@pdstech.com or call her at 480.212.0847

In this role, you will make utility metering equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080238
Job Location: Cartersville, GA
Duration: 4 months
Input Date: 05/22/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOCAAY&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Northford, CT.  
Please reach out to Betsy Murphy bmurphy@pdstech.com or call her at 203.415.9123

In this role, you will make fire protection controls and safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble electromechanical parts by using power drivers and/or manual tools.
  • Test Assembly Boards using automatic computer type testers.
  • Assemble metal boxes for the finished units using power drivers or manual tools.
  • Assemble carton boxes and inserts to pack the finished units.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080250
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/10/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fQSAAY&URLSource=cjhunter

AutoCAD Drafter

Description:
Chipton-Ross is seeking an A&E Services - Drafter located in Columbia, MD

RESPONSIBILITIES:
Within A/ES the drafter works as an integral team member and prepares various civil, structural, architectural, plumbing, mechanical, and electrical engineering 2D drawings and 3D Building Information Models (BIM). Work requires use of most conventional drafting and BIM techniques, and working knowledge of the terms and procedures of the architectural and engineering design, construction, and facility management industries. New or recurring work is assigned via various means; which may include written or verbal orders, methodology, procedures, data sources, and precedents to be followed. Drafter/Designer applies a general knowledge of design, construction and facility management necessary for preparation of documentation that comprises presentation drawings, all stages of design drawings, construction contract drawings, shop drawings and sketches, record drawings (as-builts), and facility management drawing with data links. Drawings and BIM models are prepared utilizing Autodesk AutoCAD and Revit, respectively.

REQUIRED EXPERIENCE:
MEP and/or architectural experience a plus.

EDUCATION:
Accredited Bachelor's Degree in related field.

WORK HOURS:
Part-Time/First Shift




 
Job Number: 177087
Job Location: Columbia, MD
Rate: $DOE
Duration: 12 months
Input Date: 02/12/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Civil/Structural Designer

Description:

Designs components or portions of systems, and modifies existing designs to develop or improve them.
 Develops solutions to problems of unusual complexity that require a high degree of innovation and ingenuity. May lead a section or group of designers/drafters, usually on a single project.
  • Responsible for 3D modeling, preparing 2D drawings and drafting checking of process structures and modules, process and electrical equipment foundations for industrial facilities
  • Coordinate with other disciplines to develop design deliverables
  • Will have supervisory responsibility for drafting on project or at a program level
  • Perform material take-off, assemble estimate and construction packages, prepare professional service budgets and schedules, issue construction documents, participate in model reviews
  • Must be proficient in AutoCAD, CadWorx 


Qualifications



  • Minimum of 7-10 years' of experience in civil and structural drafting and design of production facilities required
  • Associate's degree or 2 years of college course work is a plus
  • MS Office skills (Word, Excel, PowerPoint) required
  • Excellent oral and written communication skills required




 
Job Number: 1910103041
Job Location: El Dorado, AR
Duration: 12 months
Input Date: 06/07/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jvLQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Combat Vehicle Mechanic Retrofit

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Combat Vehicle Mechanic Retrofit
(U.S. Citizenship Required*)
Ft. Lewis, WA
2019-9027

Responsibilities:
• Perform scheduled and unscheduled maintenance, troubleshooting, repair and retrofit (improve invulnerability and survivability) on the Army Stryker family of vehicles (FOVs) or components pursuant to applicable contracts within the organization
• Scheduled maintenance: Periodic and preventative manufacturer (in accordance with the IETM) required maintenance to extend the life of the vehicle and/or performing upgrades as mandated during a designated period of time by customer.
• Unscheduled maintenance: The emergent, corrective or restorative maintenance requirements not previously planned or programmed but require prompt attention and must be added to, integrated with, or substituted for previously scheduled workloads.
• Troubleshoot: Systematically identify issues and problems within the complex mechanical systems, electronics, computers and software systems within the Stryker family of vehicles.
• Meet safety requirements with OSHA, ANSI and ASME industrial standards, compliance and technical training, administrative duties to meet contract obligations and organizational requirements, adhering to Federal Acquisition Regulation (FAR) compliance.
• Other duties as may be required/ assigned.

Qualifications:
• Occasional work in confined space within vehicle interior.
• Work in improved and unimproved maintenance facilities as well as field environment.
• Able to work independently with minimal supervision and organize/prioritize multiple tasks.
• Must be able to foster and enhance teaming environment
• Working knowledge with Microsoft Office software including Word, Excel, Power Point, Access and Lotus Notes preferred
• Proven ability to perform multiple tasks within multiple work stations.
• Demonstrated good housekeeping skills and ability to convey such practices to team members.
• Able to work extensive extended hours in a fast paced, challenging, high pressure environment.
• Must be able to gain and maintain access to Joint Base Lewis McChord and other military bases assigned to
• Must meet and maintain ASR guidelines for driver's station entry as described in Standard Practice 2-644
• Able to maintain US Passport required
• Able to be issued and maintain a Class B CDL
• Able to be issued and maintain company AMEX card required
• Must be able to gain and maintain access to all military installations in which the work is performed
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required, combined with 3+ years mechanic experience
• Maintenance on tactical/combat vehicles preferred (- 91B, 91S, 63S, 63W or 63B MCM or USMC MOS' 2147, 3521, 3522, 3524) Experience on Stryker, LAV 2.5 or LAV III desirable.
• Documented commercial training and/or experience acceptable in lieu of military vehicle experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9027
Job Location: Ft. Lewis, WA
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Analyst (Secret Clearance)

Description:

Administrative Notes:




  • Clearfield, CT

  • $70 to $80/HR - based on experience

  • Active Secret Clearance issued by the DoD

  • Contract

  • 1 Year with option for extension

  • 1 Opening

  • Reason for Opening(s): Growth



 



Role description & Responsibilities:




  • Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.

  • Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

  • The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements.

  • Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.



 



Experience Requirements:




  • **MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)**

  • BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.

  • Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction

  • Knowledge of composite materials and manufacturing processes

  • Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team



 



Experience Preferred:




  • Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable

  • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation


 
Job Number: 9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Construction Manager

Description:
Major task and responsibilities of position:   
  1. Secure services from contractors and vendors that cannot be provided by in-house maintenance personnel

 

  1. Support maintenance activities and project engineering by working with these entities to obtain manpower and services.

 

  1. Coordinate, monitor, and evaluate the work of contractors and vendors on capital and maintenance projects.


  1. Plan and schedule contractors work to meet the requirements of

the project schedule.

  1. Participate in pre-construction meetings with contractors, Bayer personnel and other key stakeholders.
  2. Lead field activities such as pre-bid site visits, mobilization and set-up of assets and equipment, and job-site reviews that require a high level of interaction with contractors and vendors.
  3. Manage the flow of materials and equipment associated with the project, including receiving, storage, and issuance to the contractor for installation.
  4. Perform inspections to ensure that contractors’ work meets specifications and overall quality standards.
  5. Monitor contractor personnel for compliance with site safety policies and procedures.
  6. Ensure that the hazard communication process is carried out before the contractor begins work.
  7.  Monitor contractor performance as it impacts process safety management; verify work is performed according to specifications and PSM guidelines.
  8. Approve contractor invoices and equipment rental invoices for payment; verify time sheets for contractor employees.
  9. Track and report contractors’ progress toward project milestones and completion of key activities.
  10. Evaluate contractors’ work upon completion; ensure that preparations are complete for process start-up and safety review.

 

  1. Inform management personnel of issues, concerns, and problems with contractors and/or their work, cost, or ability to meet deadlines. Work collaboratively with these individuals to find solutions to problems, revise specifications, and keep a project within budget.

 

  1. Ensure positive, productive and efficient working relationships between contractors, vendors, client’s personnel, and other stakeholders.

 

  1. Reduce delays, expedite work processes, solve problems and remove obstacles to completion of key tasks and activities, working primarily through others.
  2. Mediate conflicts, negotiate with vendors and contractors to solve problems and settle disagreements.


  1. Issue permits that contractors need for safe and compliant work:

Qualifications
 
  • Ten years of experience as a construction superintendent on large commercial or industrial projects is required; Experience in oil and gas, chemical manufacturing, power generation or heavy industry is preferred.
  • Five years minimum experience working in trades (electrician, pipefitter, boilermaker etc.) is a plus.
  •  An associates or bachelor’s degree in construction management and experience as a construction/building inspector are pluses.
  • Experience in scheduling, ordering, field supervision, quality control, and production of all phases of commercial construction is necessary Experience managing multiple projects is a strong plus; the ability to manage multiple and sometimes conflicting priorities is essential.
  • Strong organizational skills and the ability to compose reports and accurately track project costs are required.
  • Well-developed interpersonal skills, including the ability to manage diverse personalities and to get along with all types of individuals are required.
  • Computer literacy, including the ability to use Excel at an intermediate level, Access, SAP and the Microsoft Office suite of products is necessary for success in this role.

 
 
 
Job Number: 1910099505
Job Location: KS City, MO
Duration: 6 months
Input Date: 03/13/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWlVQAU&URLSource=cjhunter

Contract Administrator

Description:
Contract Administrator

Rome, NY
$29/hr
3 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Contracts group supporting Industrial Programs has an immediate need for a Contracts Administrator in its Rome, NY site. The successful candidate will be responsible for all facets of contract administration on development and production programs for industrial end users.

Duties include, but are not limited to: receipt, review, and processing of customer solicitations/RFPs; proposal preparation; review and negotiation of contract terms and conditions; preparation of contract documents including non-disclosure agreements and memoranda of agreement; order reviews and acknowledgments; order entry; forecasting the demand for particular products to drive supply chain activities; managing customer demand by analyzing trends, managing forecast tools, and maintaining accurate data; flowdown of contract requirements to internal stakeholders; change management; identification of contract and business risk; accounts receivable support/reporting; audit support; and contract close out as well as company initiatives including ACE, standard work and business financial goals.

This position requires a Bachelor's degree plus 3 years experience relevant to Contract Administration. In the absence of a degree, 7 years of relevant experience is required.

Ideal candidate will:
• Have exceptional written and verbal communication skills
• Be able to effectively communicate with all levels of employees and management
• Possess strong analytical and problem-solving skills
• Be highly efficient and self-motivated
• Always be professional
• Adhere to policies and implement changes as required
• Adapt to competing work priorities
• Have a strong focus on continuous improvement
• Maintain a keen focus on results
• Have SAP experience
• Have proficiency in software programs such as: Microsoft Office Word, Excel, PowerPoint and Outlook.
 
Job Number: 11155
Job Location: Rome, NY
Rate: 29.00
Per Diem: No
Overtime: Possible
Duration: 3 mos
Start Date: ASAP
Input Date: 07/08/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Controls Engineer

Description:
PDS Tech, Inc. is seeking a Controls Engineer in Auburn Hills, MI.

Responsibilities:


In-house equipment development:
  • Participate in initial equipment conceptual development and carefully balance product specifications, process control requirements, layout complexity, cost, quality and lead-time limits.
  • Lay out new industrial electrical control panels which are NFPA79/NEC/UL508A compliant, and create electrical, pneumatic and fluid schematics.
  • Architect, write, and debug PLC ladder logic with an emphasis on generating code that is organized, structured, documented, maintainable and reusable. PLC code will interact with subsystems such as conveyors, robots, Manufacturing Execution System (MES), LabView, machine vision, and 3rd party equipment.
  • Implement (ANSI/RIA15.06/OSHA compliant) control reliable safety systems for safeguarding robots, gantries, conveyors, and other high volume manufacturing equipment.
  • Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting.
  • Manage electrical cabinet builds, field wiring, pneumatic and fluid plumbing.
  • Select and size electrical and electromechanical components such as servos.
  • Introduce automated processes into production, and train and Maintenance and Production Teams to support after deployment into production.
  • Create machine interactions with plant-wide Manufacturing Execution System (MES) to communicate product acceptability, machine status, and process variables.

 
Outsourced automation equipment development:

  • Participate in specification and standard creation, release to Vendor and quote technical evaluation.
  • Enforce application of standards, Manage suppliers during specification, design review, design approval.
  • Establish test plans and control test plan execution at Vendor and at Company facility during installation and buy-off.
  • Characterize and validate new automated process equipment for deployment into production.


Existing automation equipment refinement:

  • Debug and optimize automated processes to maximize cycle time, improve availability and yield.
  • Characterize and validate automated processes using a data driven approach such as simulation, Capacity and Capability statistical test (Gage Repeatability and Reproducibility test, Cpk, etc).
  • Assembly Line Development and Implementation.
  • Create detailed utility layouts for entire assembly lines and interface with facilities teams for implementation.
  • Create data management and tracking communications network architecture and interface with cross-functional teams for product, processes and quality traceability control implementation.

 
The ideal candidate takes pride in his/her hands-on work, analytical ability, organizational skills and attention to detail. He/She appreciates an environment where superior work is encouraged, noticed and rewarded and where individuals carry tremendous responsibility. He/She looks forward to learning an incredible amount on the job.
Requirements:
  • Proficiency with process integration and electromechanical/mechatronic systems.
  • In depth knowledge of Electrical Standards (NFPA79, National Electric code, UL508A).
  • In depth knowledge of Safety standards (ANSI/RIA15.06, OSHA).
  • Advanced proficiency programming industrial equipment: Ladder logic PLCs (Allen Bradley ControlLogix, CompactLogix and RSLogix 5000); Safety PLCs (Allen Bradley ControlLogix, SmartGuard); Human Machine Interface (HMI/GUI - AB Panelview, FactoryTalk, LabView, Ignition); Field bus Networks (AB DeviceNet, Ethernet IP, Safety rated field bus networks); & Ethernet communications between machine PLCs and database systems.
  • Demonstrated excellence in programming PLCs.
  • Must have a well-defined methodology for maintaining code structure and organization.
  • Ability to program state machines for complex processes which involve multi-station parallel. processing, pick and place automation, data acquisition, and PID control.
  • Proven ability to design fault-tolerant systems with error handling and recovery.

 
Qualifications:

  • BS/MS Electrical Engineering (or equivalent – Majors in: Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, etc.), or equivalent experience.
  • 5+ years of experience as a hands-on Controls Engineer or Applications Engineer working on automation and/or electromechanical systems.
  • Experience managing capital projects and vendors.

 
Job Number: 1910102115
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/16/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gtOQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Definition and Analysis Engineer - Civil Aircraft Operation Scenario

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Definition and Analysis Engineer for Civil Aircraft Operation Scenario.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0001 on application.



Responsibilities:


Define the method and process for aircraft operation scenario definition.
Define the civil aircraft operation scenario database.
Define the method and process for function analysis based on scenario.
Make the best practise for function analysis based on scenario.
Train other engineers in Civil Aircraft Operation Scenario definition and analysis.


Skills/ Qualifications / Experience Sought:

Bachelor and above.
10 years experience for aircraft and system design.
10 years experience for civil aircraft operation or research.
System Engineering background and especially for function analysis.
Be familiar with SysML language.
Fluent English with good communication skills.
 
Job Number: BHJOB28358_63
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dsgn Spec II

Description:
We have an outstanding Contract position for a Design Specialist to join a leading Company located in the York, PA surrounding area.

** Position requires U.S Citizenship.

Job Responsibilities:
Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity.
Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications.
Ensures designs are free of layout process defects.
May assist engineers with defining design standards and configurations.
Applies Computer Aided Design (CAD-UG NX11) methodologies, theories, and techniques.
Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions.
Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
Develops innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs by utilizing sound design principles and practices.
Prepares moderately complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of component(s) or a portion of a functional system to satisfy system and integration requirements within cost and producibility constraints.
Prepares drawing packages to military or equivalent ASME standards.
Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions.
Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates the integration of equipment.
Performs and documents technical calculations such as design evaluations, tolerance studies, mass and section properties, static and dynamic loading.
Identifies assembly interference, design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design.
Interfaces with various internal customers to solve moderately complex technical problems.
May interface with external customers to solve moderately complex technical problems.

Experience Required:
Associate Degree with an emphasis in engineering drafting/design or an equivalent combination of training and experience; plus a minimum of six additional years drafting and design experience, including a minimum of two years design work.
Must be skilled in the creation of model-centric models and drawings utilizing UG NX11. Creo 4 is a plus.

Experience Preferred:
Experience with relevant applications in a defense environment.

Schedule: 7:00am – 5:00pm
 
Job Number: 36782
Job Location: York, PA
Rate: $33.82
Duration: 7 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Electrical M.E.:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
-Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
-Develop the specific methods and instructions for manufacture and/or assembly of products.
-Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
-Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Job Details:
Education / Certifications BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required.

Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 10999
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/21/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environment Effects (E3) Protection Engineer

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0003 on application.



Responsibilities:

Instruct team member on the review of documents about equipment/system
level Indirect Effects of Lightning(IEL)/High Intensity Radiated
Fields(HIRF)/EMC compliance verification.

Instruct the documentation and verification of system level IEL/HIRF tests.

Lead the team to conduct troubleshooting of electromagnetic interference
onboard.

Instruct aircraft level lighting/HIRF/EMC test verification.
Compile aircraft level E3 design requirements.
Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
Establish aircraft level E3 design and verification procedure.


Skills/ Qualifications / Experience Sought:

10+ years' experience in E3 protection design and verification of aviation
field and rich experience in type certification.

Experience in system level lightning and HIRF verification.

Experience in aircraft level E3 design requirement; intensive study in aircraft
electromagnetic protection technique.

Experience in electromagnetic protection for composite fuselage.

Education background in EMC, electromagnetic field and microwave,
electronic engineering or other relevant subjects.

Familiar with relevant design method and procedure of electromagnetic
protection for composite material aircraft. Participated in electromagnetic
protection design of relevant type. Civil aircraft project is preferred.

Familiar with airworthiness regulations of E3 for civil aircraft. Full
participation in the type certification credit procedure desired.

Master EM simulation and have experience of aviation program are
preferred.

Good communication and written skills in English.
 
Job Number: BHJOB28358_61
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Exhaust Processor

Description:
We have an outstanding Contract position for an Exhaust Processor to join a leading Company located in Tempe, AZ.

** Candidate must be able to obtain and maintain a Confidential Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Main function is to vacuum process and assemble components for the manufacture of bare image intensifier tubes for use in night vision products. The Exhaust Processor receives the preassembled tube and loads it into the exhaust station. They then process and activate the tube and cathode under ultra-high vacuum. The tube is then sealed and unloaded. All process data is recorded in the quality tracking system (QTS), then the tube and the accompanying paperwork are delivered to Initial Test (I-Test).

Major Responsibilities:
Must be able to follow written procedures and complete assigned work in a timely manner to keep production schedule while maintaining acceptable yields as determined by area supervisors and engineers.
Use of hand tools, including but not limited to, power drivers and torque wrenches.
Use of Digital Multi-Meters (DMM), high voltage probes and general electronic equipment.
This job has considerable physical demands.
Must be able to consistently report to work and be on time for scheduled shift.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
A minimum of One verifiable year of exhaust/vacuum experience within the Exhaust Processor Job Family is required for this position.
Desired Qualifications:
One to three years of exhaust/vacuum experience within the Exhaust Processor Job Family, or having a minimum of two years’ experience within the high-tech manufacturing environment with like experience and equivalent knowledge.
Attainment of OJT certification in 50% of the critical exhaust processes for their exhaust area.
ETO provided in-house clean-room certification.
General knowledge of ultra-high vacuum technology (OJT provided).
Basic computer knowledge for data entry and email communication OJT forms and visual aids.
Basic electrical knowledge, Lock-out/Tag-out and industrial safety (OJT provided).
 
Job Number: 36443
Job Location: Tempe, AZ
Rate: $16.00
Duration: 3 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer (Power Plant or Energy/Waste or Related Industries)

Description:
Facilities Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 07/19/2019
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

Facilities Plant Engineer 2

Description:
Buildings, Equipment Installations, Utility Systems, Building Codes, Regulations, Construction Principles

RESPONSIBILITIES:
Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Aligns architectural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Assists others to integrate the activities of multiple engineering disciplines, outside consultants and government agencies. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Aligns civil/structural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Assists others to facilitate the implementation of basic, routine improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Aligns electrical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Aligns mechanical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. With limited supervision, ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. With limited supervision, supports or manages construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. With limited supervision, prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.With limited supervision, produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. With limited supervision, translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Assists with updating design standards and site-specific operating procedures in order to establish common practices. With limited supervision, provides input to infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.With limited supervision, collects customer requirements. Participates in conceptual design by analyzing intended use/occupancy and desired aesthetics, code research, and the development of preliminary design elements. Participates in projects requiring interdisciplinary engineering support. Estimates resource costs/requirements, identifies materials, equipment, and services, and develops preliminary project schedule in order to establish project scope. With limited supervision, plans, manages, and executes projects or selected project elements. Acquires and modifies assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations. With limited supervision, interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

EDUCATION:
Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

 
Job Number: 178098
Job Location: Chantilly, VA
Rate: $DOE
Duration: 12 Months
Input Date: 03/21/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Heavy Equipment Operator

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Heavy Equipment Operator
(U.S. Citizenship Required*)
Campo, CA
2019-9057


Responsibilities:
• Operate heavy equipment such as cranes, clamshells, power shovels, motor graders, heavy loaders, carryalls, bulldozers, rollers, scrapers, and large industrial tractors with pan or scrapper attachments.
• Equipment is used to excavate, load, or move dirt, gravel, or other materials.
• Operator may read and interpret grade and slope stakes and simple plans, and may grease, adjust and make emergency repairs to equipment.

Qualification:
• Active Interim Secret Security Clearance is required to start. Active Secret Security Clearance is preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 0+ years of experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9057
Job Location: Campo, CA
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Indirect Buyer Specialist

Description:
JSG is hiring an Indirect Buyer Specialist in Trumbull CT for a 12+ month contract

Responsibilities:

Responsible for the delivery, cost, and quality of their respective repair vendors
Analyst must take ownership for all vendors within their jurisdiction from a strategic and transactional vantage point
Maintain open repair orders and issue supplier performance reports as needed
Negotiate pricing and contractual terms
Manage supplier relationships and performance issues
Expediting and coordinating material requirements to suppliers for repaired Trumbull components.
Manage the return and speedy replacement of defective materials
Review and qualify new and existing suppliers as needed.
Managing communication with customers related to pricing, contract flow down, civil airworthiness certification, quality and delivery
Monitor supplier portal to ensure suppliers are properly maintaining commit dates
Make recommendations to suppliers to enable them to better serve and conduct business in a co-operative and ethical manner to achieve departmental and company business objectives as defined by management
Manage weekly metrics and goal
Education/Experience:

Bachelors’ Degree
Demonstrated ability to proactively manage and organize multiple priorities in a fast-paced environment
3-5 years’ experience in working with external vendors and setting performance standards of excellence
Previous experience with SAP ERP system a Plus but not a requirement
Ability to influence and aggressively hold suppliers accountable to established performance metrics
Identifying Process improvements using LM Enterprise Excellence Continuous Process improvement principles & methods
Focus on results and be proactive
 
Job Number: 374497
Job Location: Trumbull, CT.
Per Diem: Split if Qualified
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 06/28/2019
Last Updated: 07/08/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1910100719
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094541
Job Location: Manitowoc, WI
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Industrial Engineer
(U.S. Citizenship Required*)
Greenville, SC
2019-9098

Responsibilities:
• Analyze sequence of operations, work flow, and manpower loading to improve efficiencies in both F-16 aircraft production and sustainment environments, as well as Warehouse Operations for Greenville Site Operations.
• Study and complete data analysis pertaining to production and sustainment performance, cost control, cost reduction, and other related production systems using tools like Microsoft Excel, Access, PowerPoint, OneNote, Project, or data analysis tools.
• On the basis of these studies, monitor the development and implementation changes to production workflow, manpower changes, or changes to the schedule.
• Develop detailed work plans in collaboration with Operations Leadership team.
• Establish methods for maximum utilization of production personnel.
• Facilitate continuous improvement activities as required.
• Complete other projects as assigned.
• This position supports a 9/80A-1st work schedule.

Qualification:
• Greenbelt Certified
• Earned Value Management (EVM), an understanding of Schedule Performance Index (SPI) and Cost Performance Index (CPI)
• Aircraft Production, Maintenance, Modification, Repair and/or Overhaul Experience
• Advanced Microsoft Excel and PowerPoint experience, specifically in creating, monitoring and reporting metrics related to cost and schedule.
• Experience developing resource loading plans and/or manpower plans
• Experience in scheduling, with an understanding of critical path methodology
• Experience with Systems, Applications and Products (SAP)
• Experience in applications of learning curves
• Excellent communication skills (verbal, written and presentation)
• Able to multi-task, organize and prioritize assignments
• Areas of Expertise: Industrial Engineering, Project Scheduling, Microsoft Office Suite, SAP, Metrics, Earned Value Analysis
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree from an accredited college combined with a minimum 3+ years of Industrial Engineering-related experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9098
Job Location: Greenville, SC
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Location: Appleton, WI
Rate: $28.23 - $31.37/HR
Duration: Long Term Contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Education and Experience Requirements:
1. Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles.

Principle Duties and Responsibilities:
Essential Functions:
1. Support analysis with area Management to establish and maintain daily work activities.
2. Support analysis with area Management, support staff, and Material Control to design and maintain part presentation requirements and procedures.
3. Assist in identification of equipment, machinery, and facilities acquisition including justifications and economic analysis to support Operational, Safety and Quality initiatives.
4. Assist in development and maintenance of Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
5. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.)
6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
7. Support all Safety, Sustainability and Ergonomic initiatives as required.
8. Implement plant layout, process flow, and material handling techniques.
9. Support area Management in generating orders/requests for Tooling including management of tool priorities.
10. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.

Additional Functions:
1. Develop and maintain work place methods and manpower requirements.
2. Assist in the training and development of entry-level industrial engineering personnel.
3. As required, aid in development and maintenance of Business Continuity Plan.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Ability to read and interpret engineering models and facility layouts.
3. Ability to operate computerized equipment, such as personal computers, CATIA, etc.
 
Job Number: 11065
Job Location: Appleton, WI
Rate: $28.23-$31.37/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 07/28/2019
Last Updated: 08/15/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer / no clearance SC

Description:
165386
1751-1 Industrial Engineer

Work Location: Greenville, SC
Status: Open
Qty: 1
Desired Start Date: 7/15/2019
End Date: 7/14/2020

Job Description :
The Industrial Engineer analyzes sequence of operations, work flow, and manpower loading to improve efficiencies in both F-16 aircraft production and sustainment environments, as well as Warehouse Operations for Greenville Site Operations.

Studies and completes data analysis pertaining to production and sustainment performance, cost control, cost reduction, and other related production systems using tools like Microsoft Excel, Access, PowerPoint, OneNote, Project, or data analysis tools. On the basis of these studies, monitors the development and implementation changes to production workflow, manpower changes, or changes to the schedule. Develops detailed work plans in collaboration with Operations Leadership team. Establishes methods for maximum utilization of production personnel. Facilitates continuous improvement activities as required. Completes other projects as assigned.

Qualifications :
Bachelor's degree from an accredited college with at least 3 years of Industrial Engineering-related experience

Advanced Microsoft Excel and PowerPoint experience, specifically in creating, monitoring and reporting metrics related to cost and schedule.

Experience developing resource loading plans and/or manpower plans

Experience in scheduling, with an understanding of critical path methodology

Desired skills :
Bachelor's degree in an Engineering related discipline

Experience with Systems, Applications and Products (SAP)

Excellent communication skills (verbal, written and presentation)

Ability to multi-task, organize and prioritize assignments

Experience in applications of learning curves

Greenbelt Certified

Aircraft Production, Maintenance, Modification, Repair and/or Overhaul Experience

Earned Value Management (EVM), an understanding of Schedule Performance Index (SPI) and Cost Performance Index (CPI)

Pay Rate: $31.00 Hourly

Areas of Expertise Industrial Engineering Yes 1 2 - 4 Years
Areas of Expertise Project Scheduling No 5 < 1 Year Software Skills MS Excel Advanced Yes 1 2 - 4 Years Software Skills MS Powerpoint Advanced Yes 2 1 - 2 Years Software Skills MS Access Beginner No 7 < 1 Year Software Skills SAP No 5 1 - 2 Years Technical Skills Metrics Yes 2 1 - 2 Years Technical Skills Earned Value Analysis No 4 < 1 Year
 
Job Number: JE-1751-1
Job Location: Greenville, SC
Rate: 31/hr max
Duration: 12 months
Input Date: 07/10/2019
Last Updated: 07/25/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration: 6 Months


Job Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: D26-Mfg Industrial Engrg
 
Job Number: 19-04634
Job Location: Berkeley, MO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 7/19/19
Input Date: 07/05/2019
Last Updated: 07/10/2019
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Industrial Engineer roles in CA and WA states

Description:
Industrial Engineer 2 and 3
Location: Everett, WA and Huntington Beach, CA
Duration: 6+ Months

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: D26-Mfg Industrial Engrg
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/30/2019
Last Updated: 08/19/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Industrial Engineer- Secret

Description:
PDS Tech is seeking a Industrial Engineer with an Active DoD Secret Clearance for a position in St. Louis, MO

Job Purpose


Manage projects within manufacturing as well as projects outside of manufacturing. Determine how to manufacture parts or products, or deliver services, with maximum efficiency.

Principal Accountabilities



  • Work with Manufacturing Engineering to develop standards for various processes for production and design including forming, machining, composites, trim and drill, processing, painting, etc. 
  • Track hour’s performance for manufacturing by the various processes and programs. Analyze shop capacities for machinery and calculate percentage loads.
  • Participate in the budgeting process, financial reporting process and Continuous Improvement activities.
  • Review production schedules, engineering specifications, process flows, and other information to understand methods and activities in manufacturing and services. 
  • Develop management control systems to make financial planning and cost analysis more efficient.
  • Enact quality control procedures to resolve production problems or minimize costs.
  • Design control systems to coordinate activities and production planning to ensure that products meet quality standards.  
  • Confer with customers about product specifications, vendors about purchases, management personnel about manufacturing capabilities, and staff about the status of projects.
  • Engage in supply chain management to help the business minimize inventory costs, conduct quality assurance activities to help keep customers satisfied. 

  Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Education
Bachelor's degree in Industrial Engineering preferred. However, degrees in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering Technology, or general engineering will be accepted.
  • Must have an active DoD Secret Clearance with an investigation close date within the last 5 years 
  • Minimum of three years engineering experience 

Experience and Qualifications 

  • Candidate must have skills of creativity and ingenuity to design new production processes in many kinds of settings to reduce use of material resources, time, or labor while accomplishing the same goal.
  • Critical-thinking skills which allows for creation of new systems to solve problems related to waste and inefficiencies.  Solving these problems requires logic and reasoning to identify strengths and weaknesses of alternative solutions, conclusions, or approaches to the problems.
  • Listening skills developed through operating in teams, but they must also solicit feedback from customers, vendors, and production staff. They must listen to customers and clients to fully grasp ideas and problems the first time.
  • Math skills with a basic understanding of the principles of calculus, trigonometry, and other advanced topics in mathematics for analysis, design, and troubleshooting in their work.
  • Problem-solving skills that allow for the ability of designing facilities for manufacturing and processes for providing services, this candidate may deal with several issues at once, from workers’ safety to quality assurance.
  • Speaking/Presentation skills, candidate may have to explain their instructions to production staff or technicians before they can make written instructions available. Being able to explain concepts clearly and quickly is crucial to preventing costly mistakes and loss of time.
  • Writing skills, candidate must create documentation for other professionals or for future reference. The documentation must be coherent and explain their thinking clearly so that others can understand the information.

Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1910100039
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/27/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYTcQAM&URLSource=cjhunter

Industrial Engineer-2,3,4 in WA

Description:
Industrial Engineer

Location: Renton, WA
Duration: 6 months

Job Description:
Ideal candidate has experience on 737 program and with precedence modeling software (Aurora or similar software.) Must also have had shop floor experience

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
D26-Mfg Industrial Engrg
 
Job Location: Renton, WA
Per Diem: Split
Duration: 6 Months
Start Date: ASAP
Input Date: 05/30/2019
Last Updated: 08/19/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_70
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Berkeley, MO
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Renton, WA
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Everett, WA
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Logistics Sales Manager

Description:
PDS Tech Inc. is seeking a Logistics Sales Manager in Atlanta, GA.







Description
 You will contribute to the development and execution of sales plans that support company growth and profitability objectives.
Essential functions include
- Prepare and conduct customer visits, calls and presentations.
- Promote Logistics Services
- Develop spot and regular opportunities with existing and new customers,
- Provide technical support and guidance at key stages of a Proposal
- Coordinate and execute proposals
- Develop logistics concepts and technical solutions for Logistics Services and calculation of resource
requirements and structures
- Source, research and collate logistics information of specific interest to Logistics Services, such as
market intelligence/trends, appropriate standards, typical logistics concepts
Your performance will be measured through
- Profit and Turnover (through realized price / claims negotiations),
- Customer Satisfaction (VOC) - delivery performance and organization responsiveness.















Education
First or Masters level Degree in Logistics, Supply Chain, Industrial Engineering or similar.
At least 6 years’ experience in logistics and supply chain operations and solutions engineering
management
Skills: Presentable with good interpersonal and communication, Presenting and Influencing Skills.
Personal Traits: Self-motivated with a positive attitude, Strong drive, Ability to work in a start-up
environment. Having possess sound business sense with an eye for opportunities and development in
the logistics domain.
Fluent in French is a plus.
Travel max 50-75%.








 
Job Number: 1910101093
Job Location: Atlanta, GA
Duration: 1 months
Input Date: 04/17/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Burke
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dlbQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:






Administrative Notes:




  • Clearfield

  • OPEN Rate

  • Active Secret Clearance issued by the DoD. Last investigation with in the last 4.5 years.

  • Contract

  • 1 Year+ with option for extension

  • 1 Opening

  • Reason for Opening(s): Growth



 



Job Description:




  • Northrop Grumman Innovation Systems is seeking a Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.



 



Responsibilities:




  • Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs

  • Concepts and designs special tooling within an Integrated Product Team structure

  • Manages tooling technical, quality and schedule

  • Uses and/or manages Computer Aided Design (CAD) resources for tooling design

  • Works with vendors to ensure successful fabrication of tooling

  • Witnesses source inspection of special tooling at fabrication locations

  • Proofs tooling upon receipt

  • Maintains tooling documentation related to design, fabrication and proofing

  • Provides tooling estimates for new tools



 



Education and Experience Requirements:




  • BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years' experience with BS or 0 years' experience with MS in engineering.

  • Preference given to candidates with experience in an aerospace manufacturing environment.

  • DoD Secret Clearance required

  • Design experience using 3D CAD systems (CATIA V5, NX) preferred

  • NX experience preferred over CATIA V5

  • Closed form and/or FEA stress analytical capability preferred

  • Experience with project management including budget, schedule and technical

  • Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies

  • Experience with general metallic fabrication including welding, machining, and forming.








 
Job Number: 9271216
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S9271216

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S9271216
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S9271216
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/21/2019
Last Updated: 07/13/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract


**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: JE-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 07/18/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Understanding all configuration definition and cost impacts in support of change pricing for non-recurring & recurring change pricing proposals including fact-finding, renegotiations, and support of various supplier contractual obligations with cost and pricing implications.

Cost non-recurring and recurring estimates for nacelle & pylon products in support of the procurement organization for supplier contract pricing proposals and claims.
The supply chain estimator is also expected to provide input to, use and understand cash flow models related to supplier proposals. Documentation of assumptions and systematic revision control of source data related to their estimates is required.
Perform comparative cost analysis for Sr. leadership and Passport reviews.


Qualification:
* Knowledge of SAP, Team Center & Catia V5.
* Strong interpersonal & emotional intelligence skills; team player and ability to work with a broad base of technical, operations and finance peers at various levels of the organization.
* Familiarity with product structure & reading engineering drawings and Catia Models.
* Understanding of labor & overhead rates, standard-to-actual ratios, & material factors.
* Concise communication skills, planning, and organizational skills
* Understanding of Continuous improvement and labor learning impact.
* Understanding of data analysis methods and data organization
* Ability to create labor routers and BOMs
* Comfortable working with ambiguity and solving problems
* Ability to assist in the Basis of Estimate (BOE) development, implementing pricing assumptions, and preparing a complete pricing proposal.

Required Skills:
* 3-5 years of experience in a cost estimating or manufacturing engineering capacity.
* Sound reasoning and mathematical skills including an understanding of labor learning curve theories.
* Understanding of non-recurring and manufacturing labor processes and material utilization.
* Ability to rationalize RFP requirements into product cost implications.
* Strong understanding of cash flow modeling and financial analysis metrics, and confidence with explaining modeling scenarios implications and analysis.
* Ability to deal with stress and a flexible work schedule during tight deadlines.
* Excellent computer skills: Microsoft Office products (EXCEL, PowerPoint, & Word).
* Ability to design and implement SAP BW reporting tools.

Preferred Skills:
* The ideal candidate would have 3-5 years in an aerospace cost estimating or manufacturing engineering background familiar with broad aerospace manufacturing product flow, work instructions, tool families, engineering and testing requirements, cash flow modeling.
* Good knowledge of proposal pricing business practices cost accounting standards and appropriate application.
* Sound reasoning skills and ability to work with a broad base of technical, operations, aftermarket, finance and sr. leadership.

Education:
* Bachelor's Degree in Finance/Engineering (Manufacturing/Industrial)
* MBA a plus
 
Job Number: 49961
Job Location: Chula Vista, CA
Rate: 48.50
Duration: 8 months
Start Date: ASAP
Input Date: 07/09/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

5 more Mechanics needed in Mira Loma, CA

Description:
PDS TECH INC is looking for 10 more Mechanics in Mira Loma, CA

If you are interested - meet the qualifications and available for on OnSite interview...
Call DJ @ (714) 384-0004 OR (800) 234-8644 x 20204 and send resume to: denglert@pdstech.com 

 

Responsibilities include:
Perform mechanical services and repairs (disassemble and replace with new parts -
refurbishment
• Maintain all assigned company tools and/or equipment in the branch area or on service trucks.
• Completes necessary work orders, parts orders, delivery reports, time sheets, and other paperwork required to document the mechanical work and other duties accomplished.

Education: High School Diploma or G.E.D. required
• Years of Experience: 2 or more years of mechanical assembly experience required - Previous experience servicing vehicles is preferred


 
 
Job Number: 1910103159
Job Location: Mira Loma, CA
Per Diem: No
Duration: 12 months
Input Date: 06/19/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033k95QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Military Operations Analyst

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Military Operations Analyst
(U.S. Citizenship Required*)
Fort Bragg, NC
2019-9090

Responsibilities:
• Identify and manage internal and external all-source Military Operations, including both analytical and collection requirements from across the Military Operations community.
• Report to the Survey Analysis Center Chief.
• May work alone or with DoD civilians and military personnel.
• Interface with other offices and agencies to ensure timely and effective completion of tasks
• Identify requirements and tasks them to the appropriate collection elements
• Verify that responses meet requirements
• Compile the daily activities report and distributes, coordinates with the specified targets- webmaster to verify reporting data is posted to the web portal
• Coordinate with operations centers and operational leads to support missions.
• Perform normal office functions such as setting up and maintaining alphabetical, numerical and/or subject files
• Interview callers and making proper referrals
• Arrange meetings and conferences
• Receive, refer or answer mail.
• May take and transcribe dictation
• Use personal computers and standard desktop software to compose reports, correspondence, and memorandums
• Review drafts and finished documents for appropriate grammatical usage; answers questions relating to office operations and established policies and procedures.
• May provide guidance and direction, as needed, to lower-level secretaries and other clerical employees.

Qualification:
• Active TS/SCI Security Clearance is required at time of hire.
• This position supports a 5/40 work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience; or Master’s Degree

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9090
Job Location: Fort Bragg, NC
Duration: 3 Months
Input Date: 07/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Machine Maintenance Expert - China

Description:
NC Machine Maintenance Expert - China.

Our Aerospace client in China require an NC Machine Maintenance Expert, to work with them in China.

Job Role:

The ideal candidate will be responsible for production line development, system testing, debugging, maintaining and providing technical guidance.

They will analyse the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions.

They will be responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle.

Following up the project progress in time, leading the team to solve the problems that are related to the site production line, ensuring the project is completed on time.

Be responsible for intelligent manufacturing & AI research subjects application.

Be responsible for intelligent manufacturing information management and programming.


Qualifications & Experience:

Bachelors graduates or above, with more than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development.

Familiar with R&D, production, management process in the aeronautical field.

Familiar with organisational intelligent manufacturing related to equipment software, hardware technology and organisational information management software.

Proficiently program the equipment control system of intelligent manufacturing.

Experience of Leading organisation intelligent manufacturing.

Experienced in intelligent manufacturing and industrial robotics is preferred.

Familiar with information system or software development, programming

Experience with Siemens, Heidenhain and Fanuc machine system setting up, PLC modification and optimisation and overseas working experience is preferred.


Please quote ref JO0000000254 on application.
 
Job Number: BHJOB28358_10
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/07/19
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NJ Based Bridge Engineer

Description:
*This is a Full time permanent position located in Mount Holly NJ*
*Candidates must live or are relocating to within 1 hour of job location*
*Full benefit package and bonus are included*



We are hiring for a Permanent NJ based Structural Bridge Engineer. Candidate will be responsible for the full gamut of completing a bridge project [from conventional grade separations to major, complex river crossings, trusses, arches, box girders and cable-stayed bridges] conceptualization to RFI/RFP to specification and material design and development to inspection and completion.



Daily duties might include working with teams to create and submit an RFI/RFP, design with design teams, meeting with customers/site visitations, developing plans/bid packages, cost estimating, creation and maintenance of schedules and milestones, impact studies, researching and obtaining permits, help with QC/QA documentation, Working with NJDOT as needed, creating and presenting reports to management and local/Gov’t entities, etc.



Required:

*5-10 years’ experience working as a bridge/highway construction engineer.

*Strong design experience, using AutoCad 2013 or higher; understanding of manual drafting.

*BS in Civil Engineering

*New Jersey licensed EIT



Pluses:

*NJ PE

*CBSI certification
 
Job Number: 924
Job Location: MT Holly, NJ
Rate: $75-$100 DOE
Per Diem: no
Input Date: 06/26/2019
Last Updated: 07/24/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Occupational Health and Safety Specialist

Description:
General Summary: 
The Health and Safety Specialist will plan, develop, and administer training programs in accident prevention, fire prevention, safe work procedures, and all other safety related topics. He or she will lead the safety teams at each location, perform audits of the plants, and recommend actions for the correction of hazardous situations to ensure associate safety as well as compliance with OSHA regulations.
 
Duties and Responsibilities:
1.        Lead implementation of facility safety programs, to include developing safe work methods, procedures, and policies in accordance with Company guidelines
2.        Guides to control the handling of hazardous materials or disposal of hazardous wastes; instructions to control the issuance, labeling, and storage of such materials; and standards and procedures to protect employees and materials from ionizing radiation.
3.        Analyzes progress reports, determines exposure trends, and evaluates program accomplishments in order to coordinate the program properly and to be in a position to plan for training, special studies, surveys, or indicated corrective action. Maintains close liaison and cooperation with all parts of Honda Aircraft Company to assure a complete integration of the Health/Safety program.
4.        Serves as an advisor to management on Health/Safety matters concerning modification to or evaluation of new work processes, equipment, or facilities related to the health of the workforce. Researches complex or controversial issues, and makes recommendations to ensure Honda Aircraft Company policies remains in conformance.
5.        Researches new advances in industrial hygiene and solves unusual problems where no regulatory standards exist.
6.        Resolves complex problems and issues independently with work being reviewed at project completion to ensure policy compliance. Applies a wide range of qualitative and quantitative methods to assess and improve Health and Safety program effectiveness.
7.        Evaluates overall program accomplishments, and develops long range plans and recommendations as to the best methods to meet organizational goals and objectives.
8.        Plans, organizes, and directs regular on-site surveys and investigations of all works areas to determine the nature and severity of health/safety hazards present.
9.        Prepares technical reports based on findings of studies, inspections, analysis of laboratory results, etc.
10.        Promotes industrial hygiene practices by working with employers and employees and by participating in public information activities. Provides and presents justification for findings to interested parties when appropriate.
11.        Responsible for recognizing, evaluating, and controlling environmental conditions or stresses that may arise in or from the workplace which may cause sickness, impaired health, significant discomfort, or inefficiency.
 
Education, Work Experience, Certification and/or Licensure:
1.        Bachelor’s degree in Occupational Health & Safety , Environmental Science, Chemistry, or Mechanical Engineering.
2.        OSHA Certified.
3.        Experience in developing and performing Health and Safety training programs.
4.        Experience in a Manufacturing setting. (To include internship / Co-op positions)
Knowledge, Skills and Abilities:
1.        Scientific expertise – Knowledgeable about environmental and occupational hazards and should be able to quickly identify problems related to air quality, radiation, and other environmental factors
2.        Analytical thinking – This role also requires strong analytical skills to assess issues and develop working hypotheses about the causes of environmental and occupational health issues
3.        Attention to detail – As the Occupational Health & Safety representative, you should also be very attentive and able to notice, measure, and monitor slight changes that can impact workers’ health and wellness
4.        Problem-solving skills – Technical problem-solving is vital in this role, to devise short- and long-term solutions to environmental and safety issues on jobsites
5.        Communication skills –Effective written and verbal communicators to prepare reports related to their findings and solutions and collaborate with physicians and leadership.
 
Physical Requirements:
1.        Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2.        Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3.        Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4.        Read, hear, speak, and see with no restrictions, as required by job duties.
5.        Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6.        Effectively communicate in Business English language.
7.        Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
8.        Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
 
Job Number: 1910102114
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 05/06/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gtJQAQ&URLSource=cjhunter

Packaging Engineer

Description:
Chipton-Ross is seeking a Packaging Engineer 2 for an opening in Dallas, TX.

RESPONSIBILITIES:
Packaging Engineer for a position in Grand Prairie, TX to develop preservation, packaging and packing methods using automated design data to protect materials, parts and assemblies being shipped to the customer. Furnish detailed packaging instructions to Shipping personnel for use in preparing materials for delivery. Select applicable packaging methods using current specifications and procedures including MIL-STD-2073. Understand requirements and assure compliance with DOT regulations on shipment of hazardous materials. Obtain Interim Hazard Classifications for the shipment of explosive materials. Plan and conduct Performance Oriented Packaging Testing and Reporting. Task includes preparing test plan, coordinating with testing facility, observing testing, gathering result data, and completing test report. Contact vendors and maintain a current file of the latest technology in packaging materials and equipment. Supply instructions to Shipping for application of reusable containers. Transmit packaging information into the data processing system. Prepare packaging data for submittal to customers as required. Examine contracts to determine preservation and package requirements. Prepare estimates of preservation and packaging costs for submittal to cost estimating groups. Ensuring all Packaging, Handling and Storage (PHS) program/technical reviews are scheduled and conducted. Develop initial packaging and packing required to ship system equipment to support test flights, ground tests, Logistic Demonstration and System Support Package requirements will be best commercial packaging utilizing procedures outlined in American Society of Testing and Materials (ASTM) D 3951. Preservation and packaging methods and designs will be of minimum cost consistent with the protection required. Conducting analysis of handling equipment requirements to ensure adequate facilities and equipment for handling system hardware will be available at storage depots and installations that will handle system materiel. Handling equipment requirements will be monitored throughout the program and every effort will be made to limit new requirements.

REQUIRED EXPERIENCE:
- Strong technical background - Computer Aided Design (CAD) experience - Strong written and oral communication skills, technical writing experience, and an ability to perform oral presentations in front of large groups - Must be able to interact well in a team atmosphere - Proficient with Microsoft Office Suite (Word, Excel, PowerPoint and Outlook) - Candidate must be willing to work overtime and travel as needed to support program requirements

PREFERRED EXPERIENCE:
- PRO-E and ArtiosCAD experience - Hazardous Materials transportation and shipping regulation knowledge - Familiar with Military specifications/standards. - Radio Frequency Identification (RFID) knowledge - Familiarity with Code of Federal Regulations Title 49 (Parts 171-180) - Familiarity with the International Civil Aviation Organization (ICAO) Technical Instruction for the Safe Transport of Dangerous Goods by Air, or the International Maritime Organization's International Maritime Dangerous Goods Code (IMDGC) based on the modes of shipment. - Familiarity with commercial packaging in accordance with ASTM D 3951 that allows for storage in enclosed facilities for one (1) year without damage to the hardware. - Product Data Management software and workflow process familiarity

EDUCATION:
Accredited Bachelor of Science Degree in Packaging, Packaging Science, Packaging Technology and/or Packaging Engineering or other related Engineering

WORK HOURS:
9/80
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 179602
Job Location: Dallas, TX
Rate: Up to $40.00 DOE
Duration: 12 Months
Input Date: 05/30/2019
Last Updated: 08/19/2019
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 06/26/2019
Last Updated: 07/19/2019
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer (Fairfax EfW facility) - Lorton, VA
Location: Lorton, VA

Job Dscription:
Plant Operations Engineering:
• Monitor boiler and turbine performance daily.
• Regular (weekly) facility performance review meetings with Ops Dept.
• Identify areas for improved production and reduced cost, lime usage, boiler cleaning, steam plant line up’s, etc.
• Monthly Operating reports submittals
Boiler Reliability Engineering
Participating in boiler outage inspection services at the facility both during forced and scheduled outages.
• Assist in the preparation of outage planning defining inspection scope, schedule, costs and resource requirements.
• Preparation of Condition Assessment Reports with executive

summary.
• Inspection data compilation, analysis and presentation.
• Develop and revise standard specifications for outage work scopes.
Predictive Maintenance Program Technical Support
Providing engineering support to the facility Maintenance Supervisor for mechanical equipment predictive maintenance program.
Asset Improvement Project Engineering and management; providing engineering for asset improvement project development and execution.
• Coordinate with Regional Engineering Manager for resource support and design review when required.
• Develop work scopes, solicit bids and execute projects.

Technical Standards
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare exception requests of technical standards.
• Prepare Facility Change Notice (FCN) documents for facility changes or improvements. Coordinate engineering review process reviews of all facility FCN’s

Position Requirements
The position requires a degree in engineering and a minimum of 1-3 years of power plant or related industrial experience and a technical background in solid fuel boiler and steam turbines.
Must be proficient in Microsoft Excel, Word and Power Point. Auto Cad experience a plus.


HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantVA
Job Location: Newark, NJ
Rate: $105K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 06/26/2019
Last Updated: 07/19/2019
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

Principal Industrial Engineer LA

Description:
165489
Principal Industrial Engineer (Job Number: 19019150)

Number of Openings: 1

Location(s): United States-Louisiana-Lake Charles


Shift: 1st Shift

Target Start Date: Aug 5, 2019

Target End Date: Oct 7, 2019

Pay Rate: $48 to $50/hr

Work Schedule: 9/80

Duration of Assignment: 2 Months

Aerospace Systems has an opening for an Industrial Engineer to join our team of qualified, diverse individuals. This position will be located in Lake Charles, Louisiana.

The selected candidate will be responsible for:

- Analyzing and designing sequencing of operations and work flow to improve efficiencies at suppliers;
- Establishing methods for maximum utilization of production processes and personnel.
- Participate in assessment of suppliers and all phases of production operations.
- Conducts studies pertaining to supplier production control, work flow, cost control, cost reduction, inventory control, and production record systems.
- Based on the results of the above mentioned studies the successful candidate will recommend develop and implement plans and programs, modifications and revisions to operating methods.


Basic Qualifications:

B.S. degree in a STEM (science, technology, engineering, mathematics) plus at least 5 years of experience or a Master Degree plus 3 years of experience.
Demonstrate experience with the Microsoft Office Suite; and Microsoft Project.
Able to work in both external and internal environmental conditions.

Preferred Qualifications:

Manufacturing experience with offsite suppliers.
Demonstrate ability to analyze supplier manufacturing capability and characteristics
 
Job Number: JK-1785
Job Location: Lake Charles, LA
Rate: 50/hr max
Duration: 2 months +
Input Date: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
We have an outstanding Contract position for a Quality Engineer to join a leading Company located in the Hicksville, NY surrounding area.

** Position requires U.S Citizenship.

Job Responsibilities:
Support the development, verification, and manufacture of products using Advanced Production Quality Planning, Continuous Improvement, and Statistical Process Control techniques.
Develop and manage data and metrics using Data Visualization tools, SQL, and advanced excel.
Turn data to information with recommendations for cost savings and process improvements.
Perform product quality and quality management system audits to assure compliance with customer, drawing, internal, and regulatory requirements.
Coordinate needed actions to support continued ISO/AS9100 certification, preferred supplier status, and AS 9001 certifications (required for Government Quality Engineers).
Serve as Voice of the Customer with suppliers on all quality-related activities.
Review, identify, implement, and maintain Customer Quality flow down requirements.
Perform review of bid and proposal quality clauses and provide compliance matrix.
Perform review of customer quality clauses, quality documents, and provide compliance matrix.
Support Operations to ensure that products and processes comply with the relevant requirements of the quality management system and contribute to an atmosphere of continuous improvement through the realization of cost reduction and process improvement initiatives.
Perform design review activities including inspectability, consistency, adequacy, accuracy, and conformance to customer requirements and provide recommendations for improvement.
Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for internal and external customers.
MRB/ECN Board representation and duties.
Responsible for participating in continual improvement activities to enhance the quality system, such as 5S, Kaizen lean methods, etc.
Employs mistake-proofing techniques.
Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data.

Basic Hiring Criteria:
A Bachelor’s Degree in Mechanical Engineering, Industrial Engineering, Electronic Engineering or Quality Engineering from an accredited institution.
0 - 3 years’ experience.

Desired Qualifications:
Understanding of Microsoft Office products.
Understanding the use of computer databases – for example, MRP, QA, etc.
 
Job Number: 36823
Job Location: Hicksville, NY
Rate: 32.00
Duration: 7 months
Start Date: 7/22/2019
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality MRB Engineer (Secret Clearance)

Description:

Administrative Notes:




  • Clearfield

  • OPEN Rate

  • Active Secret Clearance issued by the DoD. Last investigation with in the last 4.5 years.

  • Contract

  • 1+ Year with likelihood of extension

  • 2 positions for 1st shift. 2 positions for 2nd shift (3:00pm to 11:00pm)

  • Reason for Opening(s): Growth



        



Job description:




  • Seeking a Sr. Principal Mission Assurance Engineer to provide support to our ACS Program Team.



 



Role description & Responsibilities:




  • Candidate will work in an industrial environment and support solving complex engineering problems.

  • Will effectively interact with design engineering team and provide support across Factory Value Streams, Materials and Process experts, Process engineering, and Tool Design.

  • Candidate is responsible/certifies all certified tooling requirements. Routinely coordinates technical issues with various programs and customers.

  • Candidate works independently, leads certified tooling team member, senior member of Tool and Gage committee, and provides direction for certified tooling maintenance and repairs



 



Requirements & Qualifications:




  • Active Secret DoD Clearance within 4 ½ years of last investigation

  • Bachelors Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 5 years of applicable experience

  • Experience in working with aerospace specifications and drawings

  • Experience supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment

  • Knowledge of root cause / corrective action processes and techniques

  • Functional knowledge of production control systems (SAP/Visual Mfg/etc)

  • Experience in supporting MRB processing



 



Preferred Skills and Experience:




  • Composite processing experience

  • Experience in Quality Assurance and processing MRB

  • Understanding of AS9100 requirements


 
Job Number: 9271004
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Requirements Management Engineers - Aircraft - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require Requirements Management Engineers.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0002 on application.



Responsibilities:

Responsible for Requirement Management Planning and tools.
As expert to support the requirement improvement, validation and verification work.
Participate in team decision-making and provide support and collaboration for the team.

Skills/ Qualifications / Experience Sought:

Bachelor or above degree.
Rich experience in Requirement Management of civil aircraft or onboard products (at least 15 years experience in relevant fields).
Proficient in requirement management and processes of civil aircraft.
Capable of leading the team to develop requirements on the requirement management platform and tools according to project requirements.
Familiar with the information architecture of interface files of large civil aircraft.
Familiar with the methods and techniques of aircraft interface definition and validation.
Proficient in IBM Rational Doors and its development language DXL, with relevant tool development experience.
Fluent English with good communication skills.
 
Job Number: BHJOB28358_62
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SIGINT Network Analyst

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

SIGINT Network Analyst
(US Citizenship Required*)
Hanover, MD
2019-9104

Responsibilities:
• Analyze a variety of information and intelligence relevant to the threats facing the systems, infrastructure, and resources critical to the nation, and develops relevant research studies and recommendations
• Provide intelligence support for contingency operations, battle staff and operational-level planning, joint and multi-lateral training exercises, and strategic engagement policy throughout the Areas of Operational Responsibility (AOR) and Areas of Interest (AOI)
• Perform requirements management and/or collection management
• Analyze/evaluate methods for performing continuous appraisal of data from sampling, statistical analysis, evaluation, flow processing, and management assessment
• Research, develop/prepare briefings and analyses which include narrative, tabular and/or graphic materials
• Develop/disseminate standard operating procedures (SOPs), and validation criteria for personnel, entities, components, and Communities of Interest (COIs)
• Conduct data mining for unknown linkages in existing information and maintains integrated database tracking system for controlled correspondence
• Conduct analytical studies of domestic and/or allied military, commercial or civil operations, which may lead to recommendations to improve operational effectiveness in the client organization
• Exercise judgment in determining methods of attack and defense, techniques to be used, and manner of presentation of results in all phases of analysis
• Develop/prepare briefings, analyses, summaries or after-action reports which may include narrative, tabular or graphic material

Qualifications:
• Department of Defense TS/SCI Security Clearance with a Polygraph is required at time of hire.
• Basic data processing skills (scripting in PERL, PYTHON, etc. or equivalent capability)
• Strong technical writing skills to articulate requirements to ANR developers as well as developers in other organizations including vendors
• Able to diagnose a network protocol using the outputs of standard signals and protocol analysis tools (WIRESHARK, DVT, TAROTCARD, etc.)
• Strong teaming skills to work with other technical disciplines to include signals analysts, protocol analysts, hardware developers, and intelligence analysts
• Experience using Wireshark and/or Renoir or similar protocol analysis product
• Experience in researching and using telecommunications standards (ITU-T Recommendations and IETF RFCs)
• Experience with data repositories BLACKPEARL, xKEYSCORE, NKB, etc.
• Experience in operating collection front-end systems such as the AST-557, Packet Raptor, AST-128, etc.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in a related specialized area or field or the equivalent is required combined with a minimum of 5 years of relevant experience; or Master's Degree with a minimum of 3 years of relevant experience.
• 5 years of network analysis experience to include non-IP networks
• 5 years of experience with telecommunications, network management systems & network management protocols

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
 
Job Number: 2019-9104
Job Location: Hanover, MD
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Senior Controls Engineer

Description:
JSG is hiring a Senior Controls Engineer in Monrovia CA

Responsibilities:

Ability to analyze complex data and present to management and engineers in understandable discussions
This requires strong technical and social aptitude for written and verbal communication
Identify obstructions and issues early to Project Managers and Management
Plan with System Engineering Manager and V.P. of Operations and Systems methods for long term Systems Group sales growth and cost reductions with improved quality
Complete pre-sale conceptual design, schedule, and cost estimation of software, electrical, and mechanical for semi-automated and fully automated industrial processing workstations developed from communication with customers
Implement HMI and GUI integration for system operation, motion control, laser control, resistance welder control, machine vision (Cognex), data collection and analysis, file management, and networking capabilities
Develop Structured, re-useable low-level and high-level motion control system code for Delta-Tau, Aerotech, Allen Bradley, and similar motion systems implementing controls and I/O functions.
This requires a strong background in motion control and S.T.E.M.
Supply mechanical design suggestions for robust operation to mechanical engineers for detailed design implementation
Create Software Design Specifications (SDS) and Hardware Design Specifications (HDS) based on User Requirements Specifications (URS), purchase orders, quotations, sales orders, and any additional compliance documents
Build, develop, and evaluate prototypes for automation and control systems based on detailed SDS and HDS
Develop laser optics path and vibration isolation designs with input from Applications and Advanced Technology Departments and customer application results
Directly responsible for ensuring continuous Systems robotics, vision, motion control, and pick & place improvements
Experienced in kaizen methods applied to engineering and controls is a plus
Education/Experience:

Knowledgeable in software design tools and environments including .NET, Visual C++, C#, current Experience in C# is a plus. Fundamental background in Software Engineering.
Four-year degree in computer science, engineering, physics, or related discipline required. Masters Electrical engineering, Automation or Control Engineering preferred.
8 years+ experience in designing custom motion control, HMI, robotics, pick & place, and hardware for automated control systems.
3 years+ experience in designing custom machine vision applications preferred.
Experience with lasers and optics helpful
Electrical engineering design experience; Solidworks Electrical is a plus.
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion, longer-term projects.
Preferred applicants will have experience in DLL generation for selected software-controllable systems components
 
Job Number: 374344
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 06/28/2019
Last Updated: 08/14/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structural / Stress Engineer (MADYMO experience required)

Description:
This position will support Product Development Teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to the engineering team based upon analysis results. This position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.

Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer-term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem-solving skills
 
Job Number: 1910102563
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Senior Systems Engineer

Description:
JSG is hiring a Senior Systems Engineer in Monrovia CA

Responsibilities:

Pre-sale conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations
Detailed design of tooling, fixtures, layout of motion control components and other peripherals, electromechanical packaging
Conduct acceptance testing leading to customer sign-off on selected projects
Project management role for selected projects from purchase order to shipment.
Assume primary responsibility for the successful completion of assigned projects.
Oversee construction and maintenance of design file and user documentation for complete system
Prepare engineering input for product release and support by other departments
Cost estimation includes estimation of NRE, RE, and direct material for custom portions; discussion with the Production manager for estimation of assembly and test labor for custom portions. Cost estimation summary is delivered to the Proposal Manager
Project schedule development using critical path method exemplary covering all tasks from PO to shipment including those for which others are responsible for performing. The project schedule is delivered to the Proposal Manager
Represent the company in a professional manner to the customers, vendors, and other people and organizations outside the company.
Coordinate acceptance test requirements, sample materials, laser application, machine readiness, customer visit schedule, and lab resources for acceptance tests. Manage acceptance test and handle all exceptions necessary to secure customer sign-off.
Specify design verification test requirements, and conduct, review and approve the results of such tests.
Prepare and conduct audience-appropriate design reviews to customer, engineering and management personnel
Ability to travel occasionally (2 weeks per quarter)
Provide technical supervision to designers and assembly technicians assigned to the project.
Team Management as required
Education/Experience:

Four-year degree in Engineering
Formal project management training and experience
Communicate well orally and in writing with customers and others with whom he/she works within and outside the Engineering department.
Able to prepare and deliver professional technical and educational presentations
Work experience using SolidWorks, machine tools, and mechanical metrology equipment
Practical experience with professional engineering design and document control methodology
Demonstrated ability to design for long term support and modification
Three years+ experience in designing or specifying tooling, fixtures, the layout of motion control components and other peripherals, electromechanical packaging as found in industrial automation systems
 
Job Number: 374336
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 07/16/2019
Last Updated: 08/14/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Shipping & Receiving Specialist

Description:
PDS Tech, Inc. is seeking Shipping & Receiving Specialists in Bolingbrook, IL.  Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480.351.2945

In this role, you will assist the teams that make personal protection equipment used to protect electrical workers from the hazards of their job.

What you will do:
  • Pick, pack, and prepare items for shipment using a forklift or other vehicle or tool.
  • Scan items and verify orders.
  • Create shipping labels.
  • Wrap skids to load into truck. 

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training and certification in the operation of Power Industrial Vehicles, such as forklifts, stand up, and cherry pickers 
  • Opportunity to work with a team making products to keep others safe
  • A fair and consistent pay check


Skills and equipment you will need:
  • Experience with FedEx, UPS, and LTL Freight
  • Steel-toed shoes required
  • Experience working in a warehouse environment

Education Required:

  • High school diploma or GED

Experience Desired:

  • Experience operating forklifts, cherry pickers, and RF Scanners 

Schedules/Shifts Available:

  • Most positions are 2nd shift, 2:30 pm – 11:00 pm
  • Overtime may be available, including some Saturdays 

 
Job Number: 1810080229
Job Location: Bolingbrook, IL
Duration: 8 months
Input Date: 05/31/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fKwAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Solder Operator

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Solder Operator
(US Citizenship Required*)
Bloomington, MN
2019-9021

Responsibilities:
• Perform project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• May be involved in packing tasks
• May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
• May conduct manufacturing inspections on processing line in accordance to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
• Contact are primarily within immediate work unit and direct supervisor
• Maintain a clean and orderly work area
• Work is closely supervised, following detailed instructions, and periodic checking on work performance

Qualifications:
• Able to perform a variety of fine pitch solder operations
• Able to learn job skills and become familiar with company policies to complete assignments
• Able to use hand/torque tools, soldering irons, other light industrial tools
• General communication and interpersonal skills
• Able to set up basic equipment and process hardware compliantly to specifications
• General knowledge of measuring equipment and math
• General computer skills
• Computer literacy
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required.
• J-Std. Solder Certification is preferred.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9021
Job Location: Bloomington, MN
Duration: 6 Months
Input Date: 07/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Structural Analysis - WA, PA

Description:
Structural Analysis Engineer

Location: Tukwila, WA
Duration: 11 months

Job Description:
Looking for early career structural analysis engineer to support client Defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program).

Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Performs basic structural analysis using well defined analysis tools to develop the structural environment, characteristics and performance. Supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general supervision.

Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Intermediate
Software Skills Nastran Yes Intermediate
Software Skills Patran Yes Intermediate

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- At least 2 or more years experience in structural or mechanical systems analysis or finite element analysis
- Experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code:
63Y-Structural Analysis
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: possible
Duration: 11 Months
Start Date: ASAP
Input Date: 05/24/2019
Last Updated: 08/19/2019
Firm Name: ICONMA LLC
Attention: Anusha Vuta
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: anusha@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/21/2019
Last Updated: 07/13/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/12/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

Structural Design Engineer- Secret

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 3 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance, investigation close dat within the last 5 years 
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1910100035
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/27/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYT3QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer IV

Description:
The Structural CAD Designer will prepare predominantly civil, structural and architectural detail drawings. Will work with Structural Engineers to produce drawings required to perform structural modifications to new and existing launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification contracts.

He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

The candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.

Experience/Skills Required
•The successful candidate should have at least (10) years of relevant experience building and/or modifying large industrial facilities.

•At least (10) years of recent Autodesk AutoCAD experience.
•3D modeling and design experience in Autodesk Inventor, Autodesk Revit Structure, Tekla Structures, or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 320
Job Location: Cap Canaveral, FL
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 06/28/2019
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural engineer1

Description:
Basic Qualifications:
0 Years with Bachelors in Science in an Engineering discipline (i.e., Civil Engineering, mechanical Engineering, Naval Architecture, Ocean Engineering Aeronautical Engineering)
Preferred Design Disciplines:
Finite Element Analysis and Hull Scantling Analysis experience
Job Description:
Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
 
Job Number: 07012019-10Z
Job Location: Pascagoula, MS
Rate: $35
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: today
Input Date: 07/02/2019
Firm Name: TASC TECHNICAL SERVICES
Attention: Mark
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Cost Estimator

Description:
Location: Chula Vista, CA
Rate: $48.50/HR
Duration: 8 month contract
Per Diem Split or Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Job Description:
1. Understanding of all configuration definition and cost impacts in support of change pricing for non-recurring & recurring change pricing proposals including fact-finding, renegotiations, and support of various supplier contractual obligations with cost and pricing implications.
2. Cost non-recurring and recurring estimates for nacelle & pylon products in support of the procurement organization for supplier contract pricing proposals and claims.
3. The supply chain estimator is also expected to provide input to, use and understand cash flow models related to supplier proposals.
4. Documentation of assumptions and systematic revision control of source data related to their estimates is required.
4. Perform comparative cost analysis for Sr. leadership and Passport reviews.

Qualification:
1. Knowledge of SAP, Team Center & Catia V5.
2. Strong interpersonal & emotional intelligence skills; team player and ability to work with a broad base of technical, operations and finance peers at various levels of the organization.
3. Familiarity with product structure & reading engineering drawings and Catia Models.
4. Understanding of labor & overhead rates, standard-to-actual ratios, & material factors.
5. Concise communication skills, planning, and organizational skills
6. Understanding of Continuous improvement and labor learning impact.
7. Understanding of data analysis methods and data organization
8. Ability to create labor routers and BOMs
9. Comfortable working with ambiguity and solving problems
10. Ability to assist in the Basis of Estimate (BOE) development, implementing pricing assumptions, and preparing a complete pricing proposal.

Required Skills:
1. 3-5 years of experience in a cost estimating or manufacturing engineering capacity.
2. Sound reasoning and mathematical skills including an understanding of labor learning curve theories.
3. Understanding of non-recurring and manufacturing labor processes and material utilization.
4. Ability to rationalize RFP requirements into product cost implications.
5. Strong understanding of cash flow modeling and financial analysis metrics, and confidence with explaining modeling scenarios implications and analysis.
6. Ability to deal with stress and a flexible work schedule during tight deadlines.
7. Excellent computer skills: Microsoft Office products (EXCEL, PowerPoint, & Word).
8. Ability to design and implement SAP BW reporting tools.

Preferred Skills:
1. The ideal candidate would have 3-5 years in an aerospace cost estimating or manufacturing engineering background familiar with broad aerospace manufacturing product flow, work instructions, tool families, engineering and testing requirements, cash flow modeling.
2. Good knowledge of proposal pricing business practices cost accounting standards and appropriate application.
3. Sound reasoning skills and ability to work with a broad base of technical, operations, aftermarket, finance and sr. leadership.

Education:
1. Bachelor's Degree in Finance/Engineering (Manufacturing/Industrial)
2. MBA a plus
 
Job Number: 11162
Job Location: Chula Vista, CA
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 8 mos
Input Date: 07/09/2019
Last Updated: 07/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Supply Chain Ops Coordinator 2 CA

Description:
1777 Supply Chain Ops Coord 2 (Job Number: 19016632)

Number of Openings: 2

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jul 1, 2019

Target End Date: Jul 1, 2019

Number of openings: 2

Location: El Segundo

Schedule: 5/40

Pay rate: $20.00 - $23.00

Duration of assignment: Up to 1 year

Clearance: None

Essential Functions:


Supports and assists activities within multiple disciplines across the Supply Chain process. Provides administrative, tactical and execution support in various aspects of the industry standard supply chain business process areas primarily Supply Chain Planning and Supply Chain Sourcing, as well as Supply Chain Business Operations.
•Utilize WIP reports to expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules
•Coordinate with Manufacturing to assist in prioritizing WIP to ensure contractual schedule dates are met
•Utilize knowledge of production requirements to coordinate with other shop support teams (Manufacturing Engineering, Quality, MRB, Industrial Engineering, Shipping, Distribution, etc.) to initiate actions to remove any constraints to production
•Perform necessary SAP and MES system transactions to release work orders for Manufacturing, receive parts into inventory, close out manufacturing work orders, and issue parts up to next higher assemblies
•Create and prepare shippers/manifests for parts leaving the facility and being transported to the customer or other internal sites

Basic Qualifications:

•High School Diploma or equivalent
•2 years’ experience in a Production, inventory or customer service environment, including tracking of parts, materials, tool usage requirements and processing customer requests
•Proficient in Microsoft Word, Excel, PowerPoint and Outlook


Preferred Qualifications:

•BA/BS degree
•Working knowledge of ERP systems
 
Job Number: JK-1777
Job Location: El Segundo, CA
Rate: 23/hr
Per Diem: no
Duration: 1 year
Input Date: 06/26/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Supply Chain Ops Coordinator 2 CA

Description:
1782 Supply Chain Ops Coordinator 2 (Job Number: 19016586)

Number of Openings: 2

Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach

Shift: 1st Shift

Target Start Date: Jul 6, 2019

Target End Date: May 29, 2020



Number of openings: 2

Pay rate: $20.00

Location: Manhattan Beach, CA

Schedule: 9/80

Duration of assignment: Up to 1 year

Essential Functions:

Supports and assists activities within multiple disciplines across the Supply Chain process. Provides administrative, tactical and execution support in various aspects of the industry standard supply chain business process areas primarily Supply Chain Planning and Supply Chain Sourcing, as well as Supply Chain Business Operations.
•Utilize WIP reports to expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules
•Coordinate with Manufacturing to assist in prioritizing WIP to ensure contractual schedule dates are met
•Utilize knowledge of production requirements to coordinate with other shop support teams (Manufacturing Engineering, Quality, MRB, Industrial Engineering, Shipping, Distribution, etc.) to initiate actions to remove any constraints to production
•Perform necessary SAP and Solumina system transactions to track and status work orders for Manufacturing, receive parts into inventory, close out manufacturing work orders, and issue parts up to next higher assemblies
•Create and prepare shippers/manifests for parts leaving the facility and being transported to the customer or other internal sites
•Assists in determining possible and actual shortages may initiate action to correct these deficiencies



Basic Qualifications:
•High School Diploma or GED
•2 years' experience in a Production Environment, including tracking of work order, parts, materials, and tool usage requirements
•Proficient in Microsoft Word, Excel, PowerPoint and Outlook

Preferred Qualifications:
•Bachelors Degree
•SAP experience
 
Job Number: JK-1782
Job Location: Manhattan Beach, CA
Rate: 20/hr
Per Diem: no
Duration: 1 year
Input Date: 06/21/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 04/06/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 03/27/2018
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician VA

Description:
165324 Test Technician

Work Site Address: Chesapeake, VA 23323
Job Number: 9292141
Max Pay Rate: 25.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Under Limited supervision performs a wide variety of technical efforts including processes, tests, troubleshoots, and repairs digital equipment. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks. May work on Analog, Digital and/or video type circuits, Radio Frequency, and logic systems. Observes, analyzes and reports test data. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks.

Knowledge, Skills and Experience:
• 4-6 Year Experience testing Analog, Digital and RF circuitry. Ability to read and interpret drawings to perform measurements and troubleshoot electronic equipment. Strong problem-solving skills with the ability to proactively identify alternate solutions to overcome technical challenges.
• Experience using a wide variety electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers.
• Must be familiar with various test equipment general purpose and special, program specific test stations, misc. measuring devices.

Required Education:
High School or equivalent

Work in industrial environment.
• Able to lift 35 lbs unassisted.
 
Job Number: MB-R9292141ATO
Job Location: Chesapeake, VA
Rate: 25/hr max
Per Diem: no
Duration: 12 months
Input Date: 08/02/2019
Last Updated: 08/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Tool Design / Catia V5 V4 GD&T / 4 openings! - Clearance CA

Description:
164970
1574-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/4/2019
End Date: 6/2/2020

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Applicants must not have applied for Tool Design at LM-Palmdale in the last 6-mo.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly

Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1574-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 12 months
Input Date: 05/17/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Tool Design Engineer

Description:
Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years preferred****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.
- Must be US citizen.
- Active/Final Secret clearance.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Active/Final Secret clearance with most recent investigation completed within the last 5-years.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.
 
Job Number: 10969
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 07/22/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tooling Design Fabrication w/Secret Clearance EM

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment tools, dies, gauges, jigs, fixtures, and prototype model parts.

Required:
*Active Secret Clearance
*5+ years experience in manufacturing environment in tool design/fabrication
*Strong experience designing using Catia parts, shapes assembly and draft of workbenches
*Engineering Degree

Preferred:
*Experience with structures, materials, sizing of mechanical, hydraulic or pneumatics
*Aircraft tooling and composites experience
 
Job Number: 190
Job Location: Palmdale, CA
Per Diem: yes split
Duration: 1 year or more
Input Date: 06/26/2019
Last Updated: 08/09/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Upholstery Technicians

Description:
STS Technical Services is currently hiring Upholstery Technicians in Broomfield, Colorado.
Job Duties:
Inspect incoming materials, including leather and other natural materials
Measure, layout, cut and sew various materials including leather, ultra-leather, vinyl and canvas
Sew materials together including leather, hook and loop tapes, scrim and other upholstery foams
Bond materials using various adhesives
Apply and finish wrap materials to seat shrouds and closures
Maintain accurate labor tracking and Job Card/Task sign-offs within the ERP/MRP system
Operate computerized leather cutting machine
Use proper safety equipment and comply with all safety requirements in accordance with company and government standards, rules, and regulations
Qualifications:
High school diploma or general education degree (GED)
Trade schooling related to upholstery or other relevant courses a plus
Three years of upholstery and sewing experience preferably in the corporate aviation completion environment or other high end industry such as yachts, luxury motor coaches, etc
Ability to lift and carry objects weighing up to 40 lbs.; use hand tools, industrial sewing machines, leather splitter/skiver and other specialized equipment
Ability to use measuring tools and perform basic math computations
Must be able to climb ladders and stairs and work in restricted spaces
Regular attendance and willingness to work overtime and other shifts as required
Proficiency in general computer use and MS Office software, including Excel, Word, and Outlook
Must qualify as a U.S. person in compliance with ITAR 22 CFR 120.15
What We Offer:
STS Technical Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.
If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 45432
Job Location: Broomfield, CO
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Back to Advanced Job Search