Job Search Results

434 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/05/22 Wednesday 03:53AM Pacific Time by ContractJobHunter. )

Listings 1 - 434

Go To My Job Tracker

Expand all descriptions

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 05/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Aviation Electronics / Electrican Technician

Description:
Chipton-Ross is seeking 10 Aviation Electronics / Electrican Technician located in Lemoore, CA

RESPONSIBILITIES:
AVIATION ELECTRONICS/ELECTRICIAN TECHNICIAN (AT/AE). Electronics technician will have sufficient knowledge and skills, including in-depth system operation, diagnostic testing, troubleshooting, and repair procedures, to perform organizational maintenance for the following systems on the F/A-18E/F aircraft Multipurpose Display Group (MDG), Tactical Aircraft Moving Map Capability (TAMMAC) System, Mission Computer (MC)/FIBRE Channel Network (FCN) System, Communication Systems, Tactical Electronic Warfare Systems (TEWS), Sensor Systems, Stores Management System (SMS), Air-to-Air Weapons, Air-to-Ground Weapons, and Radio Detection and Ranging (RADAR). These skills are to be performed under limited supervision. Electrician technician will maintain electrical and instrument systems, including power generation, conversion, and distribution systems; aircraft batteries; interior and exterior lighting; electrical control of aircraft systems, including hydraulic, landing gear, flight control, utility, and power plant engine, flight and non-instrument-type indicating and warning systems; automatic flight control and stabilization systems; aircraft compass systems; attitude reference systems; and inertial navigation systems.

REQUIRED EXPERIENCE:
Knowledge of Safety Practices and Procedures - Required - Intermediate
Maintain safety and good housekeeping standards - Required - Intermediate

EDUCATION:
Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
6:00 AM - 3 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required - At the sole discretion of management, individual must be willing and able (on potentially short-notice) to deploy/travel to a variety of locations including NAS Whidbey Island, MCAS Miramar, and MCAS Beaufort (domestic and international) for a variety of deployment durations to meet customer needs and the statement of work. Unless compelling reasons exist, failure to deploy/travel will be considered as a resignation.

 
Job Number: 177276
Job Location: Lemoore, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 02/20/2019
Last Updated: 05/21/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Avionics Design Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87952
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 05/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 05/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 05/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Tech

Description:
Chipton-Ross is seeking 3 Avionics Tech's located in Lemoore, CA.


RESPONSIBILITIES:
Test and troubleshoot electronic circuitry to fault isolate and identify the malfunctioning discrete or active components (microcircuits, transistors, capacitors, resistors, etc.), with 4 or more years of related experience or an equivalent combination of education and experience. Capable of performing repairs and conducting final acceptance testing on avionic equipment. Capable of reading and interpreting assembly drawings and electronic schematics. Experience in soldering to a high-reliability standard such as MIL-STD-2000 or J-STD-001C, and ability to inspect own work for compliance to quality standards. Experience in operating electronic test equipment such as oscilloscopes, multi-meters, frequency counters, spectrum analyzers, etc. Experience using various hand tools to (dis)assemble avionic equipment. Capable of organizing and prioritizing workload. Capable of using Windows-based computers. Ability to travel to both domestic and international locations (on short notice). Ability to obtain a DoD Secret Clearance and access to the Lemoore Naval Air Station is required. Good verbal and written communication skills.

The Field Repair Facility-West is located on the Naval Air Station in Lemoore, CA. Personnel perform repairs and final acceptance testing on avionics and test equipment to include the replacement of electronic discrete and active components (microcircuits, transistors, capacitors, resistors, etc.). Specifically required to functionally test avionics and test equipment to determine operational condition, perform fault isolation and troubleshooting of faulty avionic electronic circuits, install replacement parts using high-reliability soldering techniques, and utilize hand tools to (dis)assemble avionic assemblies. Applicant must be capable of reading and interpreting assembly drawings and electronic schematics, which are utilized in the testing and repair effort, and must be capable of inspecting their own work for compliance to quality standards. Ability to travel to both domestic and international locations (on short notice). Ability to obtain a DoD Secret Clearance and access to the Lemoore Naval Air Station is required. Individual must have the ability to work under general direction and to prioritize workload.


REQUIRED EXPERIENCE:

Must be knowledgeable in electronics operation and theory, and be experienced in testing and troubleshooting electronic circuitry to fault isolate discrete and active components. Experience in soldering to a high-reliability standard such as MIL-STD-2000 or J-STD-001C. Experience in operating electronic test equipment such as oscilloscopes, multi-meters, frequency counters, spectrum analyzers, etc. Experience using various hand tools to disassemble and assemble avionics equipment. Capable of organizing and prioritizing workload. Capable of using Windows-based computers. Good verbal and written communication skills. Previous troubleshooting experience of the following avionic systems is desired: ACNIP (AM-7300/A), ADC (CP-1334A/A), EMD (AEU-12/A), FIRAMS (AN/ASQ-194), HSD (IP-

Must be knowledgeable in electronics operation and theory, and be experienced in testing and troubleshooting electronic circuitry to fault isolate discrete and active components.


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

IND123 CR1

 
Job Number: 176799
Job Location: Lemoore, CA
Rate: $DOE
Duration: 12 Months
Input Date: 01/31/2019
Last Updated: 05/21/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Avionics Tech I

Description:
PDS Tech is seeking Avionics Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:

1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting.
2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability.
7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:



A&P/FCC/NCATT preferred. Troubleshooting experience preferred. Must be willing to work any shift.


 
Job Number: 1910100665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/02/2019
Last Updated: 05/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cefQAA&URLSource=cjhunter

Avionics Technician

Description:
Our client in Tucson is in need of 10 Avionics Technician
In your role, you will:
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
  • Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment
  • Assist with mechanical / electrical removals and installations
  • Assist with aircraft component repair
  • Perform other duties as assigned


***Great hourly rate plus Time and a Half on Overtime!***
 



    Qualifications
    As our ideal candidate:
    • You have an A Certification
    • You have avionics / electric A/C Technical School or other substantiated equivalent
    • You have the ability to read and understand electrical engineering drawings
    • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
    • You have your own basic set of hand tools with the ability to demonstrate inventory and control of tools
    • You must obtain appropriate Ground Support Equipment Qualifications as required
    • You must be able to work unscheduled overtime including nonscheduled work days and holidays
    • You must be able to work in seasonal/inclement weather outside


    ***Great hourly rate plus Time and a Half on Overtime!***
     

     
    Job Number: 1810080242
    Job Location: Tucson, AZ
    Duration: 6 months
    Input Date: 04/12/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOvAAI&URLSource=cjhunter

    Avionics and Electrical Systems- UM

    Description:
    PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

    JOB RESPONSIBILITIES:

    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


     
     



     
    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

     
    Education and Experience:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    • Avionics and Electrical System DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

     
     
    Job Number: 1910097710
    Job Location: Wichita, KS
    Duration: 6 months
    Input Date: 03/14/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

    Avionics/Electronic Systems Engineer

    Description:
    Job Details
    Special Missions - NON FAA - First shift is a 5 day work week, Overtime usually available.

    Unique Skills
    • Strong technical skills aircraft Avionics/Electrical Systems.
    • The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
    • Strong verbal and written communication skills.
    • Due to the nature of the work candidates must be US Citizen.
    • Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing.
    • Familiarity with Airworthiness Authority regulations and showing compliance to such regulations.

    Requirements
    • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-341
    Job Location: Savannah, GA
    Rate: $58 - $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 03/29/2019
    Last Updated: 05/21/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: brandon@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Buyer

    Description:
    Chipton-Ross is seeking a Buyer for an opening in Goleta, CA.

    RESPONSIBILITIES:
    - Issue request for quotes/proposals (RFQ/RFP) and select the best source that will provide cost, quality, and delivery requirements for electronic, mechanical, and electro-mechanical components.
    - Able to evaluate bid responses, negotiate price, delivery schedules, and place purchase orders in accordance with the division's policies, procedures, and government regulations.
    - Act as a liaison between suppliers and departments to resolve price, quality delivery, or invoice issues.
    - Work with suppliers on rejected material and claims resulting from purchase order changes or cancellations.
    - Monitor supplier performance and take corrective action as necessary
    - Work with planners to maintain materials and services are consistent with the production schedule.
    - Perform other procurement tasks and projects and needed

    REQUIRED EXPERIENCE:
    - Experience working with defense/aerospace or manufacturing environment
    - Strong working knowledge of procurement, planning and scheduling fundamentals.
    - Must have good working knowledge of MRP systems.

    EDUCATION:
    Accredited BA or BS in Materials Management, procurement, business administration, operations planning or related field preferred.

    WORK HOURS:
    9/80, 1st Shift
    Full-Time

     
    Job Number: 178478
    Job Location: Goleta, CA
    Rate: $27 to $33.00 DOE
    Duration: 5 Months
    Input Date: 04/04/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Rochelle Anderson
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: randerson@chiptonross.com
    Website: www.chiptonross.com

    Complaint Investigation Engineer - IN

    Description:
    Chipton Ross is seeking a Complaint Investigation Engineer in Batesville, IN.

    Job Summary:
    Analyze design related complaints, evaluate product (component) returns, complete root cause analysis on returns, assess risk documentation, and write a technical investigation report.

    Responsibilities:
    - Analyze design related complaint codes (read the complaint codes and evaluate, research and combine like items)
    - Complete engineering evaluation and root cause analysis on failed parts
    - Complete engineering investigations, including risk management
    - Write a technical report for the investigation
    - Applies technical competencies in somewhat difficult situations
    - Identifies technical problems and provides root cause analysis
    - Shares technical knowledge with others in the team
    - Generates detailed, high quality technical documentation
    - Completes assigned tasks on time with minimal supervision
    - Uses existing tools and best practices to report and track process metrics
    - Ability to effectively communicate and interact with customers, team members, and various technical disciplines
    o Informs others proactively about developments or issues that affect their work, and their ability to meet commitments
    o Uses collaborative communication style to negotiate win-win outcomes
    o Tends to be seen as original and value-added in brainstorming sessions
    o Understand detail design drawings, schematics, specifications and bills of material (BOM's)
    - This role does not have supervisory responsibility

    Requirements:
    - BS Degree in Engineering
    - 2+ years of engineering experience, or comparable experience
    - Basic knowledge of metals/plastics/welding/electronics/assembly
    - Strong organizational and communication skills
    - Proficient problem-solving skills
    - Strong interpersonal skills with the ability to work collaboratively with others in a team environment
    - Working knowledge of Microsoft Office (excel, word, databases)
    - Experience in the medical device industry is preferred
    - Experience working in cross functional teams consisting of discipline specific engineers, or comparable experience

    Education:
    - BS Degree in Engineering

    Schedule:
    - Full time

     
    Job Number: 174040
    Job Location: Batesville, IN
    Rate: $29.41 to $44.12 DOE
    Duration: 10 months
    Input Date: 09/21/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Billy James
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bjames@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Database Developer

    Description:
    Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

    If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    Database Developer
    (U.S. Citizenship Required*)
    Sterling Heights, MI
    2019-8460

    Responsibilities:
    • Design & develop databases, and integrate with enterprise-wide data warehouse
    • Work on App development and Augmented Reality (AR) projects as well as a large multinational Content Management System (CMS) producing Interactive Electronic Technical Manuals (IETM) for US Army and others.
    • Work on integrating multiple databases (data query and reporting), technical support, application user training, answering technical and operations questions, and provide system solution recommendations to solve business or technical issues.
    • Work in a team environment to support, analyze, and derive requirements and assist in the development of new products and/or improve existing applications.
    • Work with Structured Query Language (SQL)
    • Support departments computer assets and user software requirements.
    • Work with desktop, network and security departments as personnel requirements change.
    • Assist in process development and improvement projects, maintain product quality control and adhere to standard practices in product development.
    • Evaluate emerging standards, specifications, development tools, and determine impact on current requirements and recommend alternative solutions that add value.
    • Work directly with management to identify and address future program needs and gaps.
    • Investigate customer inquiries and respond in a timely fashion.
    • Update processes or software as necessary.
    • Support requirements for baseline control, content/configuration.
    • Occasional weekday and/or weekend overtime required, and occasional, short-term travel.

    Qualifications:
    • Required – able to obtain security clearance.
    • Strong programming aspect of database design and analyzing data inquiry needs as well as technical and communication skills required to develop and support a variety of business and production systems.
    • Strong skills in database design, programming/scripting and the ability to plan, analyze, design, test, implement and support software applications and the ability to lead projects.
    • Creative, with out of the box thinking capabilities to develop and coordinate solutions needed to address immediate issues and document all new and updated processes.
    • Knowledge of common Relational Database Management Systems (RDBMS) such as Oracle, IBM DB2 and Microsoft SQL Server.
    • Computer programming and scripting skills including Perl, Visual Basic, Unix shell scripts, SQL Server, PL/SQL, XML, and Java, SGML. Document Type Definitions (DTD), schema and XSLT is a plus.
    • Must have iSO, Android and Windows App development experience.
    • Knowledge of Windows and Unix operating systems / development environments.
    • Must have personal computer skills (competent with MS Office applications).
    • Excellent interpersonal and communication (oral and written) skills required.
    • Must have strong analytical and creative skills to comfortably solve complex problems that might involve ambiguity and uncertainty.
    • Must have a strong propensity to record and document processes, software and source code.
    • Must be able to perform in a team environment including team leadership when required.
    • Must adhere to strict project schedules and meet extremely high-quality standards.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s Degree in Software Engineering or Computer Science with 2+ years of applicable experience, fewer years required with an advanced degree.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8460
    Job Location: Sterling Heights, MI
    Rate: Based on experience
    Input Date: 04/11/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: jobs@Moseleytechnical.com
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Design Engineer

    Description:
    Chipton-Ross is seeking a Design Engineer for an opening in Arlington, TX.

    RESPONSIBILITIES:
    Designs, researches and develops structural engineering layouts, components and assemblies involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Develops and maintains engineering bills of material and product structures. Coordinates the inputs of a variety of disciplines including stress, manufacturing engineering and product support to ensure all engineering requirements are incorporated into the design. Specific design engineering specialties may include airframe, mechanisms and subsystems installations. Tools utilized include CATIA and Enovia (3D Experience).

    REQUIRED EXPERIENCE:
    Complete understanding and wide application of technical principles, theories, and concepts in the field. General knowledge of other related disciplines. Provide technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organization objectives. Works under supervision of direct company design lead. Work is reviewed upon completion for adequacy in meeting objectives.

    EDUCATION:
    Accredited Bachelor's degree or equivalent and six (6) years of related experience.

    WORK HOURS:
    Full-Time

     
    Job Number: 178035
    Job Location: Arlington, TX
    Rate: Up to $60.00 DOE
    Duration: 6+ Months
    Input Date: 03/19/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 2 Design and Analysis Engineer 3 located in Oklahoma City, OK

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:00 PM

     
    Job Number: 177778
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 3 located in Hazelwood, MO.

    RESPONSIBILITIES:
    Client is seeking highly motivated engineers with design and analysis experience to support Vehicle Management System (VMS) development, integration and test, including Electronic System Integration Laboratory (ESIL) development and integration, and requirements validation/verification efforts, and ultimately flight testing. Personnel are needed to support the Navy MQ-25 carrier based autonomous tanker program as well as numerous proprietary efforts. Work will be performed at the Boeing St. Louis area campus locations supporting Boeing Phantom Works, Strike, Surveillance and Mobility, and other business units. Candidates will support development and integration activities for various Boeing fixed wing, weapons and proprietary programs.

    Understand airplane input signal processing, redundancy management, system monitoring and control
    Flight Control Components hardware (HW) and software (SW) system-level verification and validation testing including hardware design, integration and qualification
    Develop requirements for the Vehicle Management System (VMS) test assets
    Monitor supplier performance to ensure system integration and compliance with requirements
    Perform hardware root-cause analysis and support overall system integration anomalies
    Work with a variety of airplane analog sensors (Linear Variable Differential Transformers (LVDT), pressure sensors, proximity sensors, etc.)

    REQUIRED EXPERIENCE:
    Experience with avionics integration

    Preferred Qualifications (Desired Skills/Experience):
    Experience with lab environments
    Knowledge of VMS design activities (HW/SW design, integration, modeling, and test procedure development
    Experience in analog and digital circuit design and analysis
    Experience with Microsoft Visio, Clearcase, ClearQuest, C++, C#, Visual Studio, Python

    EDUCATION:
    Accredited Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
    .

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    WORK HOURS:
    Full-Time/First Shift

     
    Job Number: 176458
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 MONTHS
    Input Date: 01/21/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Patrick Costello
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: pcostello@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3 (5) - OK

    Description:
    Chipton-Ross is seeking 5 Design and Analysis Engineer 3's located in Oklahoma City, OK.

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM


     
    Job Number: 175712
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Richard Barrett
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rbarrett@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3 (5) - OK

    Description:
    Chipton-Ross is seeking 5 Design and Analysis Engineer 3's located in Oklahoma City, OK.

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. Task assignments:
    - Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
    - Work with a supplier to select new IDGs that fit the new engine capabilities
    - Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
    - Assess impacts to wires, and subsystem power feeders
    - Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
    - Develop Power design reports and system design budget

    REQUIRED EXPERIENCE:
    Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc)

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM


     
    Job Number: 175714
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Richard Barrett
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rbarrett@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 5

    Description:
    Chipton-Ross is seeking 5 Design and Analysis Engineer 5's for openings in Oklahoma City, OK.

    RESPONSIBILITIES:
    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms. Other job responsibilities may include:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    Works with other to develop program test strategies.
    Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    Conducts program independent reviews and reports results to program leadership.
    Provides critical support of fielded hardware and software over the entire product lifecycle.
    Leads research into technology advances for potential application to company business needs.
    Makes recommendations for technology investments.
    Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues
    Works under consultative mentorship

    ADDITIONAL EXPERIENCE:
    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events. Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    EDUCATION:
    Accredited Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information

     
    Job Number: 178088
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/21/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 5

    Description:
    PDS Tech, Inc. is seeking Design and Analysis Engineer 5 in Oklahoma City, OK


    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.

    • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.

    • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.

    • Works with other to develop program test strategies.

    • Manages performance of critical suppliers to ensure system integration and compliance with requirements.

    • Conducts program independent reviews and reports results to program leadership.

    • Provides critical support of fielded hardware and software over the entire product lifecycle.

    • Leads research into technology advances for potential application to company business needs.

    • Makes recommendations for technology investments.

    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues

    • Works under consultative mentorship
    Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 1910099845
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/19/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Shannon White
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXukQAE&URLSource=cjhunter

    Drafter / Designer

    Description:
    PDS Tech is seeking a Drafter / Designer in Phoenix AZ.
     
    The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints.  These may include utilization of computer aided design applications.
     
    Required:
    • Must be familiar with ASME Y14.100 and its interpretation.
    • Experience with Geometric Dimensioning and Tolerancing (GD&T)
    • Ability to incorporate red-lines to original drawings from shop drawings.
    • Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
    • Capable of creating complex 3D model parts and assemblies.
    • Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
    • Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
    • Pro/E Wildfire 5 / Creo Elements 1.0 or higher
    • Keycreator / Cadkey (other 2D CAD tools acceptable)

    Candidate must have an Associates’ degree or higher


     
    Job Number: 1910100044
    Job Location: Phoenix, AZ
    Duration: 6 months
    Input Date: 03/28/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYV4QAM&URLSource=cjhunter

    Drafter / Designer

    Description:
    The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints. These may include utilization of computer aided design applications.

    Required:
    • Must be familiar with ASME Y14.100 and its interpretation.
    • Experience with Geometric Dimensioning and Tolerancing (GD&T)
    • Ability to incorporate red-lines to original drawings from shop drawings.
    • Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
    • Capable of creating complex 3D model parts and assemblies.
    • Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
    • Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
    • Pro/E Wildfire 5 / Creo Elements 1.0 or higher
    • Keycreator / Cadkey (other 2D CAD tools acceptable)

    Candidate must have an Associates’ degree or higher
     
    Job Number: 1910100044
    Job Location: Phoenix, AZ
    Overtime: possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 05/21/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: sspolzino@pdstech.com
    Website: www.pdstech.com

    EE Technical Designers in Tukwila, WA

    Description:
    EE Technical Designers Level (2, 3)

    Location: Tukwila, WA
    Duration: 6+ months

    Description:
    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    The Electrical Engineering Technical Designer will be supporting primarily BDS and BCA programs and may need to support in an office setting as well as a factory and flight line setting.

    Education / Experience:
    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    Skill Code: 625-Electronic/Electrical Design
     
    Job Location: Tukwila, WA
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 01/24/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    Elect Design and Analy Engr 3 - (5) - OK

    Description:
    Chipton-Ross is seeking 5 Elect Design and Analy Engr 3's located in Oklahoma City, OK

    RESPONSIBILITIES:
    Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM

     
    Job Number: 175757
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Elect Design and Analy Engr 4 - (5) - OK

    Description:
    Chipton-Ross is seeking 5 Elect Design and Analy Engr 4's located in Oklahoma City, OK

    RESPONSIBILITIES:
    Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

    EDUCATION:
    Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM

     
    Job Number: 175758
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Elect Design and Analysis Engineer 5 (3) - OK

    Description:
    Chipton-Ross is seeking 3 Design and Analysis Engineer 5's located in Oklahoma City, OK.

    RESPONSIBILITIES:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    EDUCATION:
    Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM


     
    Job Number: 175766
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Electrical Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking an Electrical Design and Analysis Engineer 3 foro an opportunity located in El Segundo, CA

    RESPONSIBILITIES:
    Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    WORK HOURS:
    Full-Time/First Shift
    8:00 AM - 5:00 PM

    Looking for candidates with LabView FPGA skill and experience.

     
    Job Number: 177280
    Job Location: El Segundo, CA
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 02/20/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    Electrical Design and Analysis Engineer 3

    Description:
    Design and Analysis Engineer 3

    Location: Oklahoma City, OK
    Duration: 6+ months

    Job Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Required:
    Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

    Task assignments:
    - Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
    - Work with a supplier to select new IDGs that fit the new engine capabilities
    - Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
    - Assess impacts to wires, and subsystem power feeders
    - Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
    - Develop Power design reports and system design budget

    Education / Experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Skill Code: 622-Electrical Systems Design
     
    Job Location: Oklahoma City, OK
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 12/13/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

    Description:
    Design and Analysis Engineer 4

    Location: Huntington Beach, CA
    Duration: 6+ months

    Description:
    Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

    Required Skills:
    Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

    Preferred Additional Skills:
    Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

    Education / Experience:
    Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code:
    664-Electronic Sys Design & Analy
     
    Job Location: Huntington Beach, CA
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 09/13/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    Electrical Designer / CAD Drafter (CID)

    Description:
    The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

    Activities will include:
    • conceptual layout,
    • detailed design, and
    • engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
    • Interfacing with other engineering groups to insure design requirements are fulfilled.

    The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

    The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

    Responsibilities may include:
    • Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
    • Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
    • Performing specialized electrical design computations and analysis
    • Preparing diagrams and PCB design schedule estimations.
    • Coordinating electrical design work with Electrical Design Engineers
    • Collecting background information and helping write specifications and electrical design practices
    • New product development from concept through production
    • Processing documents through document change system

    Required Qualifications:
    • IPC Certified Interconnect Designer (CID), as a minimum.
    • Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
    • Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
    • Thorough knowledge of Cadence Library manager.
    • Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    • Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    • Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
    • Full understanding of PCB, FAB and CCA manufacturing processes.
    • Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
    • Must be a US Citizen or US person.

    Preferred Qualifications:
    • IPC Advanced Certified Interconnect Designer (CID+).
    • Experience with Siemens Teamcenter PLM Software.
    • Knowledge of GD&T ASME Y14.5.
    • A background working on avionics design related experience
    • Knowledge of and the use of Hierarchal schematic blocks
    • Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
    • Experience with Microsoft Visio
     
    Job Number: 1910100867
    Job Location: Phoenix, AZ
    Overtime: possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 05/21/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: sspolzino@pdstech.com
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Description:
    Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems. Determines design approaches and parameters. Analyzes electrical requirements to determine feasibility of design within time and cost constraints. May use high level programming language to configure programmable logic devices. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Able to identify component operational characteristics that may impact system performance and or sustainability. May also review vendor capability to support development. Includes the application of specialized skill sets including digital, FPGA, DSP, CCA, power, antenna, RF and control systems knowledge as required.

    Senior professional with strong knowledge of job area and broad knowledge of project management.
    Manages complex projects or processes with general oversight.
    Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures.
    Makes moderate to substantial improvements to systems and processes.
    Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.

    Minimum Degree Required:
    Bachelor's degree
     
    Job Number: FL48455
    Job Location: Palm Bay, FL
    Rate: 50.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Input Date: 04/11/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    Electrical Engineer Design 2 / no clearance / URGENT CA

    Description:
    Electrical Engineer Design 2 (Job Number: 19006187)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach


    Shift: 1st Shift

    Target Start Date: Apr 29, 2019

    Target End Date: Apr 24, 2020

    Pay Rate: $42 top $44/hr
    Location: Manhattan Beach, CA
    Work Schedule: 9/80
    Duration: 1 Year

    NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

    Job Description:

    The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
    Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

    Basic Qualifications:

    - 2 Years with Bachelors in Science; 0 Years with Masters; 0 Years with PhD.

    - Demonstrated proficiency using digital test equipment

    - Demonstrated proficiency developing digital electronics
     
    Job Number: MB-1747
    Job Location: Manhattan Beach, CA
    Rate: 42-44/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 03/13/2019
    Last Updated: 05/21/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Electrical Engineer Design 3 CA

    Description:
    Electrical Engineer Design 3 (Job Number: 19006196)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach

    United States-California-Redondo Beach
    Shift: 1st Shift

    Target Start Date: Apr 29, 2019
    Target End Date: Apr 24, 2020

    Pay Rate: $52 to $54/hr
    Location: Manhattan Beach, CA
    Work Schedule: 9/80
    Duration: 1 Year

    Security Clearance: N/A

    NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

    Job Description:

    The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
    Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

    Basic Qualifications:

    - 5 Years with Bachelors in Science; 3 Years with Masters; 1 Years with PhD.
    - Demonstrated proficiency using digital test equipment
    - Demonstrated proficiency developing digital electronics
     
    Job Number: MB-1737
    Job Location: Manhattan Beach, CA
    Rate: 54/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 03/18/2019
    Last Updated: 05/21/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Electrical Engineering Test Tech

    Description:


    PRIMARY FUNCTION:
    The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
    This position follows a 4x10 compressed workweek schedule.
    JOB DUTIES:
     
    • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
    • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
    • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
    • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
    • Maintain documentation of testing and equipment operation.



     



     





     



    BASIC QUALIFICATIONS:
     
    • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
    • Knowledge of analog and digital symbol identification
    • Knowledge of test practices and procedures.
    • Personal computer skills required to configure and load software
    • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
    • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


    EDUCATION AND EXPERIENCE:
     
    • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
    • 2 years related experience and/or training; or equivalent combination of education and experience.


    QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
     
    • Valid State Driver’s License
    • Must be DoD Clearance Eligible


    PHYSICAL ACTIVITY:
    Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




     


     
    Job Number: 1910099812
    Job Location: Hunt Valley, MD
    Per Diem: Yes
    Duration: 6 months
    Input Date: 03/18/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

    Electrical Systems Design Engineer 3

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Task assignments:
    - Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
    - Work with a supplier to select new IDGs that fit the new engine capabilities
    - Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
    - Assess impacts to wires, and subsystem power feeders
    - Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
    - Develop Power design reports and system design budget
    Required:
    Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 373749
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 12/12/2018
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Systems Design Engineer 4

    Description:
    **Requires the ability to obtain a Secret Clearance**

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include
    • Leads work with customers to develop and document complex electronic and electrical system requirements.
    • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    • Leads work to test and validate to ensure system designs meet operational and functional requirements.
    • Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    • Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    • Researches technology advances for potential application to company business needs.
    • Makes recommendations for technology investments.
    • Works under minimal mentorship

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing.
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 374003
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/21/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Systems Design Engineer 5

    Description:
    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include
    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Works with other to develop program test strategies.
    • Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conducts program independent reviews and reports results to program leadership.
    • Provides critical support of fielded hardware and software over the entire product lifecycle.
    • Leads research into technology advances for potential application to company business needs.
    • Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues
    • Works under consultative mentorship
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing
     
    Job Number: 374001
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/21/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical UM (23&25)

    Description:
    PDS Tech, Inc. is seeking Electrical in Wichita, KS
    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

    EDUCATION:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    JOB QUALIFICATIONS:
    • Electrical DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
     
     
    Job Number: 1910098626
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 02/20/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

    Electrical/Avionic Design Engineers

    Description:
    PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

    JOB RESPONSIBILITIES:

    • Job Responsibilities:
      • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
      • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
      • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
      • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
      • Maintain a high degree of proficiency in computer applications to accomplish tasks.
      • Coordinates with direct and indirect customers and suppliers to determine system requirements.
      • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
      • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
      • Provides guidance to lower grade engineers in the solution of complex design problems.
      • Reviews and evaluates supplier proposals for potential utilization on future models.
      • Performs above work utilizing frequent application of in-depth engineering principles.
      • Assures supervision awareness of program status, problems and successes.
      • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


     
     



     
    Education/Experience:
    • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
    • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    Qualifications:
    • Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
    • Ability to read and produce wiring drawings using standard industry practices
    • Experience with electronic test equipment
    • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
    • Skills in Microsoft Office suite software
    • C/C++ and assembly programming experience preferred
    • Visual Programming language preferred
    • Excellent written and verbal communication skills
    • Strong analytical and problem solving skills
     
    Job Number: 1910097705
    Job Location: Wichita, KS
    Duration: 6 months
    Input Date: 02/27/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

    Electrical, Electronic and Electro-mechanical Components Engineer

    Description:
    Electrical, Electronic and Electro-mechanical (EEE) Components Engineer

    Location: Grand Prairie, TX (75051)

    9 month contract

    Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX. The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electro mechanical components used in military applications. The selected Candidate should be a self-starter, capable of handling several tasks at once. The selected candidate must be able to work without supervision. Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.

    Skill/Experience/Education
    Mandatory: Must be able to obtain a security clearance.
    Must be proficient with computer tools such as MS Excel and Access.
    Candidate should have experience in electrical component manufacturing process and physical property analysis.
    This position requires periodic travel to both the customer and supplier locations.

    Desired-
    The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
    Experience in Components Engineering with broad knowledge of electronic components and devices.
    The ideal candidate has experience working electrical components on a Production Program.
    Experience in the disposition of Q-Notes.
    Experience with parts release process, and with formal Configuration Board support.
    Experience working with Global Supply Chain, Quality and Manufacturing groups.







    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 56604
    Job Location: Grand Prairie, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 9+ months
    Start Date: 04/22/19
    Input Date: 04/11/2019
    Last Updated: 05/20/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Email: lleszek@butler.com
    Website: www.butler.com

    Electronic System Design & Analysis

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Education/experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: ESDE_OK
    Job Location: Oklahoma City, OK, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 04/01/2019
    Last Updated: 05/17/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electronic Systems Design & Analysis Engineer 3 - 373966

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 373966
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

    Description:
    Electronics Design and Analysis Engr 5- PCB Designer

    Location: El Segundo, CA
    Duration: 12+ Months

    Job Description:
    Mentor Expedition Printed Circuit Board (PCB) Designer
    The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
    Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
    Ensure that all requirements for manufacturing and assembly are met.
    Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
    Make schematic updates based upon changes from electrical engineers.

    Qualifications:
    • 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
    • Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
    Must be proficient with:
    • Verifying design using Design Rule Check.
    • Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
    • Utilizing Constraint Manager to define substrate and routing constraints.
    • Establishing rule areas that define specific route rules for different portions of the board.
    • Routing using both manual/interactive and automatic tools.
    • Working with different via structures.
    • Generating plane data.

    Skill Code: 624-Electronic Packaging Design
     
    Job Location: El Segundo, CA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 months
    Start Date: Asap
    Input Date: 01/02/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

    In your role, you will:
    • Assemble fabricated aircraft parts at floor stations.
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
    Qualifications:
    • Fine pitch soldering experience is required. (watch maker certifications)
    • 4 years experience in electronics assembly.
    • High School Diploma required.
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
     
     
    Job Number: 1810083538
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 03/29/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Michael Coonce
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


    In your role, you will:
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    Qualifications:
    • Fine pitch soldering experience is required is a plus 
    • 5 years experience in electronics assembly preferred.
    • Must have a High School Diploma or GED
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

     
     
    Job Number: 1610047076
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 10/22/2018
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

    Electrophysics Engineer Scientist 5

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist for an opportunity located in Oklahoma City, OK

    RESPONSIBILITIES:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Client and FAA EME requirements and to provide engineering and technical decisions for Client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    oReviewing supplier and partner qualification data
    oNuclear Hardening analysis and test
    oEMI/C analysis and test
    oEMSEC/TEMPEST analysis and test
    oHIRF/Lightning analysis and test
    oRF Co-Site analysis
    oAntenna Coupling analysis
    oElectrical Power Quality and Load analysis
    oTest Automation for aircraft modifications.

    Other job responsibilities may include
    oDevelops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    oDevelops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    oDevelops architectures to integrate multiple systems into higher level systems and platforms.
    oLeads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    oDevelops new and improved modeling and simulation techniques.
    oLeads development and execution of critical tests to validate performance of designs to requirements.
    oManages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    oProvides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    oSupports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    oCreates new tools to improve management of projects.
    oLeads development of major sections of large-scale proposals to support development of new business.
    oWorks under consultative mentorship.

    Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    EDUCATION:
    Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 177790
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate complex systems and components into higher level systems and platforms.
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Generates major sections of proposals to support development of new business.
    • Works under minimal mentorship.

    Prerequisites:
    • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099420
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/11/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: DJ Englert
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYeQAM&URLSource=cjhunter

    Electrophysics Engineer/Scientist 3

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:
    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.

     
    Job Number: 1910099417
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: TIME SQUARE 660 BUILDING
    660 SW 39TH ST STE 215

    City, State: RENTON, WA 98057
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYKQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist - Secret

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
    • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance/TS is a plus.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099423
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWZXQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist 4

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist 4 located in Oklahoma City, OK.

    RESPONSIBILITIES:
    The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with reviewing supplier and partner qualification data, Nuclear Hardening analysis and test, EMI/C analysis and test, EMSEC/TEMPEST analysis and test, HIRF/Lightning analysis and test, RF Co-Site analysis, Antenna Coupling analysis, Electrical Power Quality and Load analysis, Test Automation for aircraft modifications.

    Other job responsibilities may include
    Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    Develops architectures to integrate complex systems and components into higher level systems and platforms
    Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    Generates major sections of proposals to support development of new business
    Works under minimal mentorship

    REQUIRED EXPERIENCE:
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    EDUCATION:
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    WORK HOURS:
    Full-Time/First Shift
    7:30 am - 4:30 pm
     
    Job Number: 177789
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

    Description:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    • Develops architectures to integrate complex systems and components into higher level systems and platforms
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    • Generates major sections of proposals to support development of new business
    • Works under minimal mentorship

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373971
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrophysics Engineer/Scientist 5 - Electromagnetic Compatibility

    Description:
    **Secret Clearance Required to Start**

    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance/TS is a plus
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373972
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrophysics Engr/Scien 3

    Description:
    Electrophysics Engr/Scien 3

    Location: Oklahoma City, OK
    Duration: 6 months

    Description:
    OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with:
    - Reviewing supplier and partner qualification data
    - Nuclear Hardening analysis and test
    - EMI/C analysis and test
    - EMSEC/TEMPEST analysis and test
    - HIRF/Lightning analysis and test
    - RF Co-Site analysis
    - Antenna Coupling analysis
    - Electrical Power Quality and Load analysis
    - Test Automation for aircraft modifications.

    Other job responsibilities may include:
    - Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
    - Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    - Develops architectures to integrate systems and components into higher level systems and platforms
    - Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    - Defines and conducts tests to validate performance of designs to requirements
    - Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
    - Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
    - Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
    - Writes appropriate sections of proposals to support development of new business
    - Works under general mentorship.

    Skill Code: 62Q-Electromagnetic Compatibility

    Education / Experience:
    Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Please share updated resume at ravi@iconma.com
     
    Job Number: 19-03720
    Job Location: Oklahoma City,, OK
    Per Diem: Available
    Input Date: 03/28/2019
    Last Updated: 04/09/2019
    Firm Name: ICONMA LLC
    Attention: Ravi Kumar
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/234-6123
    800 Phone: 866/914-9724
    Website: www.iconma.com

    Embedded Engineer - Guidance Nav & Control Engr 3 & 4

    Description:
    Please let me know if you would be comfortable with the job description and do send me your updated resume asap

    Embedded Engineer - Guidance Nav & Control Engr 3 & 4

    Location: Long Beach, CA
    Duration: 6+ Months

    Job Description:
    Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

    Responsibilities include:
    - Eliciting and defining the software requirements.
    - Designing, implementing, and integrating a solution to meet the requirements.
    - Planning and executing the validation of the requirements and verification of the solution.
    The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

    Education / Experience:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code: 62Z-Math & Algorithm Dev Analysis
     
    Job Location: Long Beach, CA
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 09/13/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer

    Description:
    Description/Comment:
    The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.
    The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation.
    It also includes managing Problem reports for the software that has already been delivered.
    The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
    Primary Responsibilities
    * Executing new product introduction, value engineering, and production support projects
    * Establishes software design requirements traceability, flow down requirements, development of code and test cases.
    * Hands on debugging of code during integration and lab testing.
    * Developing complex sub-system trade studies, algorithms, and error budgets.
    * Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

    Basic Qualifications
    * Proficient with C programming language, and embedded systems in a lab environment.
    * Experience with Microprocessors, Microcontrollers, and/or DSPs
    * Excellent written and verbal skills
    * Good computer skills with ability to learn new programs/software
    * Ability to work under pressure and within time constraints
    * Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
    * 6+ years experience in software development
    * Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
    * Model Based Development, using SysML, Simulink or SCADE
    * Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
    * Knowledge and use of ADA, Assembly, Perl, C#
    * Software Verification including, test procedure development, robustness testing and debug
    * Experience with software configuration management and problem reporting tools
     
    Job Number: AZ48423
    Job Location: Phoenix, AZ
    Rate: 68.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 months
    Input Date: 04/03/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer Circuit Designer 4 CA

    Description:
    Engineer Circuit Designer 4 (Job Number: 19005125)

    Number of Openings: 1

    Location(s): United States-California-San Diego


    Shift: 1st Shift

    Target Start Date: Apr 29, 2019

    Target End Date: Oct 25, 2019

    Pay Rate: $68 to $72/hr

    Work Schedule: 9/80

    Duration of Assignment: Approx 6 month

    Job Description:


    Qualified applicant to support electronics modernization effort. The SOW include performing detail electrical circuit design, circuit level analysis, support qualification testing, preparing ATP and QTP and support electrical circuit and LRU manufacturing.


    Basic Qualifications:

    9+ years experience with Electrical Engineering Bachelor’s Degree or an equivalency of 17 years plus High School Diploma.

    Digital, analog and power circuit design experience
    •Experience with OrCAD/pspice
    •Experience with PCB troubleshooting
    •Experience with PCB layout and routing
    •Strong verbal and written communications



    Preferred Qualifications:

    Working knowledge of engineering practices/procedures regarding electronic components
     
    Job Number: MB-1733
    Job Location: San Diego, CA
    Rate: 72/hr max
    Per Diem: no
    Duration: 6 months
    Input Date: 02/15/2019
    Last Updated: 05/14/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Engineering Designer IV

    Description:
    Location: Canoga Park, CA
    Rate: $65.00 - $75.00/HR
    Duration: 1 year contract
    Shift: 9/80 Schedule (OT Possible)
    Per Diem Split: Yes (if eligible)

    **Candidates must be U.S. Citizens**
    **Permanent residents are NOT eligible for this role**
    **Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

    **Candidates should have experience specifically with flight electronics packaging for space applications**
    **Candidates should have design experience of electro-mechanical packaging or cable harnesses**

    Duties:
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs
    - Candidates should have experience specifically with flight electronics packaging for space applications
    - Candidates should have design experience of electro-mechanical packaging or cable harnesses
    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
    - Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics.
    - Willing to accept experience in lieu of Bachelor's Degree.
     
    Job Number: 10655
    Job Location: Canoga Park, CA
    Rate: $65.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 03/20/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Engineering Designer IV

    Description:
    Chipton-Ross is seeking an Engineering Designer IV for an opening in Canoga Park, CA.

    RESPONSIBILITIES:
    Perform engineering design tasks related to space electronics based products.

    Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

    Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

    REQUIRED EXPERIENCE:
    Candidates should have design experience of electro-mechanical packaging or cable harnesses

    Candidates should have experience specifically with flight electronics packaging for space applications

    Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.

    Familiarity with aerospace/defense engineering design and production processes and disciplines.

    Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).

    Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.

    Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    EDUCATION:
    Accredited Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics

    WORK HOURS:
    9/80
    Full-Time


     
    Job Number: 178066
    Job Location: Canoga Park, CA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 03/20/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Specialist, Fire Control - Tracked Combat Vehicles

    Description:
    Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

    If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    Engineering Specialist, Fire Control - Tracked Combat Vehicles
    (U.S. Citizenship Required*)
    Sterling Heights, MI
    2019-8535

    Responsibilities:
    • Design circuit cards and/or electronics.
    • Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
    • Component selection, procurement, and oversight of hardware build.
    • Create circuit board specifications, ICD's, and test plans.
    • Review and develop hardware and software requirement documents and test plans.
    • Design utilizing high and low speed digital communications standards such as: EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet.
    • Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
    • Support the integration & testing of electrical control devices and sights and sensors on the various vehicle platforms.
    • Work with other members of the engineering staff to ensure the product meets its requirements.
    • Prepare and present written reports, status reports, and presentations as necessary.
    • Provide technical support and communication to the program office, customers, and other internal departments.

    Qualifications:
    • Capable of Obtaining a Security Clearance preferred.
    • Experience with Microsoft Office.
    • Experience with Analog and Digital Circuit Design, including PCB design.
    • Experience with Microcontrollers.
    • Design of high and low speed digital communications design using EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet AVB.
    • Experience with Analog and Digital Video Circuits (RS-170, HD-SDI, LVDS, DVI, DisplayPort).
    • Experience with video distribution techniques preferred.
    • Familiarity with Military Standards and test requirements.
    • Able to use engineering development and Tools.
    • Occasional overtime, and weekend hours may be required to complete critical tasks.
    • Strong Interpersonal skills, able to work with interdisciplinary teams, and strong multi-tasking skills.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s Degree in Electrical Engineering with 10+ years of applicable experience. Other technical degrees will be considered with relevant experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8535
    Job Location: Sterling Heights, MI
    Rate: Based on experience
    Input Date: 04/11/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: jobs@moseleytechnical.com
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Specialist, Fire Control – Tracked Combat Vehicles

    Description:
    Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

    If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    Engineering Specialist, Fire Control – Tracked Combat Vehicles
    (U.S. Citizenship Required*)
    Sterling Heights, MI
    2019-8492

    Responsibilities:
    • Design circuit cards and/or electronics.
    • Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
    • Component selection, procurement, and oversight of hardware build.
    • Create circuit board specifications, ICD's, and test plans.
    • Review and develop hardware and software requirement documents and test plans.
    • Design utilizing high and low speed digital communications standards such as: EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet.
    • Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
    • Support the integration & testing of electrical control devices and sights and sensors on the various vehicle platforms.
    • Work with other members of the engineering staff to ensure the product meets its requirements.
    • Prepare and present written reports, status reports, and presentations as necessary.
    • Provide technical support and communication to the program office, customers, and other departments.

    Qualifications:
    • Required – able to obtain secret clearance.
    • Experience with Microsoft Office.
    • Experience with Analog and Digital Circuit Design, including PCB design.
    • Experience with Microcontrollers.
    • Design of high and low speed digital communications design using EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet AVB.
    • Experience with Analog and Digital Video Circuits (RS-170, HD-SDI, LVDS, DVI, DisplayPort).
    • Experience with video distribution techniques preferred.
    • Familiarity with Military Standards and test requirements.
    • Ability to use engineering development and Tools.
    • Capable of Obtaining a Security Clearance preferred.
    • Occasional overtime, and weekend hours may be required to complete critical tasks.
    • Strong Interpersonal skills and ability to work with interdisciplinary teams.
    • Strong Multi-tasking skills.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s Degree in Electrical Engineering with 10+ years of applicable experience.
    • Other technical degrees will be considered with relevant experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8492
    Job Location: Sterling Heights, MI
    Rate: Based on experience
    Input Date: 04/11/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: jobs@moseleytechnical.com
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Engineering Technician - Intermediate

    Description:

    Opportunity for an individual that can work under the direction of scientists and engineers with the independence expected to complete tasks assigned.
    A successful applicant must have excellent electrical, mechanical, and computer skills with a working knowledge of the Microsoft Office.
    Requires a bachelor's degree in mechanical, electrical, or industrial engineering.
    The candidate must have a proven track record of developing and supporting automation solutions involving mechanisms, electrical/electronic systems, optical assemblies, and pneumatics.
    Key competencies include strong mechanical aptitude, results orientation, customer focus, teamwork, and problem-solving skills. Familiar with engineering CAD systems and computer interfacing for system set-up, troubleshooting, and debug.
    Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Little creativity is required. Typically reports to a supervisor or manager.



     
    Job Number: 1910100874
    Job Location: Ankeny, IA
    Duration: 6 months
    Input Date: 04/08/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033d7WQAQ&URLSource=cjhunter

    Experimental Avionics Tech-1st Shift

    Description:
    PDS Tech, Inc. is seeking an Experimental Avionics Tech in Wichita, KS

    To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components. Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights. Perform minor repair such as replacing wires and connectors on standard electrical components, removing, repairing, and re-installing avioncis equipement. Under guidance of supervisor, assist with analysis of more complicated malfunctions and repair of standard avionincs and electrical components. Install electrical, avionics, and electronic components as directed.
    Minimum 2 years of related aircraft avionics systems, troubleshooting and repair
     
    Job Number: 1910099918
    Job Location: Wichita, KS
    Duration: 9 months
    Input Date: 03/25/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Patrick Mahoney
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jY5TQAU&URLSource=cjhunter

    Experimental Instrumentation Technician-1st Shift

    Description:
    PDS Tech, Inc. is seeking an Experimental Instrumentation Technician in Wichita, KS

    Instrumentation Tech Job Summary:
    Candidates will be responsible for carrying out Instrumentation DAS (data acquisition system) installation and troubleshooting duties on experimental aircraft.
    Candidates will be required to perform these duties in support of new product and sustaining aircraft designs.
    These duties will include coordination with other Engineering and technical groups to help develop, implement, monitor and status assignments.

    Responsibilities: * Candidate will plan and perform the work involved in the installation, calibration, and troubleshooting of instrumentation systems required for data acquisition on experimental aircraft.
    * Candidate will be utilizing various types of specialized test equipment to troubleshoot data acquisition systems on aircraft.
    * Candidate will be working independently and be responsible for good decision making.
    * Candidate will be working with all aspects of experimental aircraft design and will be required to frequently interact with engineering personnel.
    EDUCATION:
    High school education or equivalent. Technical school training is recommended to provide broad training in electronics and use of test equipment.
    EXPERIENCE:
    Requires up to 2 years experience with aircraft electrical and instrumentation systems of which at least 1 year must be with installation, checkout and calibration.
     
     
     
    Job Number: 1910100283
    Job Location: Wichita, KS
    Duration: 9 months
    Input Date: 03/28/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033bf8QAA&URLSource=cjhunter

    FAA Electronic Technician 2

    Description:
    PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
    In your role you will:

    • Construct, maintain, and test electrical systems and components.
    • MUST be able to test & troubleshoot down to the component level.
    • ABLE TO READ SCHEMATICS - To diagose and repair circuitry - Preferred
    • Use measuring and diagnostic tools to test and modify electronic parts.
    • Ensure systems and components meet established specifications.
    • Familiar with a variety of the field's concepts, practices, and procedures.
    • Relies on experience and judgment to plan and accomplish goals.
    • Performs a variety of complicated tasks.
    • A wide degree of creativity and latitude is expected.
    • Typically reports to a supervisor or manager.

    As our ideal candidate, you will meet the following requirements:
    • Requires a high school diploma or its equivalent.
    • May be required to complete an apprenticeship and/or formal training in area of specialty.
    • May require 2-4 years of experience in the field or in a related area.
    • Soldering background/experience is a PLUS
    • Troubleshooting Electronics to component level PREFERRED experience.
    • MUST HAVE ELECTRONICS BACKGROUND. 
    • Background in avionics electronics and mechanical background is very beneficial.
    • Must be a U.S. citizen.
    • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st OR 2nd shift.
    • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
    • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

    Please send your resume to mmarquez@pdstech.com today!
     
    Job Number: 1910098974
    Job Location: Olathe, KS
    Duration: 6 months
    Input Date: 02/26/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jUa8QAE&URLSource=cjhunter

    FAA Electronics Technician

    Description:
    PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
    In your role you will:

    • Construct, maintain, and test electrical systems and components.
    • MUST be able to test & troubleshoot down to the component level.
    • MUST BE ABLE TO READ SCHEMATICS - To diagose and repair circuitry
    • Use measuring and diagnostic tools to test and modify electronic parts.
    • Ensure systems and components meet established specifications.
    • Familiar with a variety of the field's concepts, practices, and procedures.
    • Relies on experience and judgment to plan and accomplish goals.
    • Performs a variety of complicated tasks.
    • A wide degree of creativity and latitude is expected.
    • Typically reports to a supervisor or manager.

    Please send your resume to mmarquez@pdstech.com today!!
    As our ideal candidate, you will meet the following requirements:
    • Requires a high school diploma or its equivalent.
    • May be required to complete an apprenticeship and/or formal training in area of specialty.
    • May require 2-6 years of experience in the field or in a related area.
    • Soldering background/experience is a PLUS
    • Troubleshooting Electronics to component level PREFERRED experience.
    • MUST HAVE ELECTRONICS BACKGROUND. 
    • Background in avionics electronics and mechanical background is very beneficial.
    • Must be a U.S. citizen.
    • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st OR 2nd shift.
    • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
    • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

    Please send your resume to mmarquez@pdstech.com today!!
     
    Job Number: 1910097471
    Job Location: Olathe, KS
    Duration: 12 months
    Input Date: 01/15/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8hlQAA&URLSource=cjhunter

    FPGA Design/Verification Engineer - Clearance TX

    Description:
    163983
    1333-1 FPGA Design/Verification Engineer

    Work Location: Fort Worth, TX
    Status: Open

    Qty: 2
    Desired Start Date: 1/28/2019
    End Date: 8/1/2019

    Job Description:
    Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

    This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

    Responsibilities include:
    • Electronic circuit design including Digital and Analog
    • Electronic circuit board design, lay out, and routing
    • FPGA development, integration, and test
    • Electronic hardware testing and troubleshooting
    • Support Software Development efforts for target hardware
    • Author and Review Hardware Specifications
    • Development and review of detailed engineering documents for firmware and hardware release
    • Lead and Develop early career team members

    Work Location: Fort Worth, TX
    Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
     
    Job Number: JE-1333-1S
    Job Location: Fort Worth, TX
    Rate: open
    Per Diem: no
    Duration: 8 months
    Input Date: 03/04/2019
    Last Updated: 05/21/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Facilities Project Administrator 3

    Description:
    Chipton-Ross is seeking 2 Facilities Project Admin 3's located in El Segundo, CA.

    RESPONSIBILITIES:
    Evaluates for major projects, contractor proposals for fair and reasonable cost. Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Provides guidance to less experienced employees. Obtains facilities design and resources commitments for major projects. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits. Finalized work package will provide documents to implement the project. Provides guidance to less experienced employees. Evaluates requests and meet with customer to define requirements for major projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer''s requirements. Creates layouts and conceptual designs. Ensures compliance with client and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Provides guidance to less experienced employees. On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Provides guidance to less experienced employees. On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Provides guidance to less experienced employees. Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Logs requests into work management system in order to document, track, and perform work.

    REQUIRED EXPERIENCE:
    Construction Management - Intermediate Level
    Facilities - Intermediate Level
    Maintenance - Intermediate Level

    EDUCATION/EXPERIENCE:
    6 or more years related work experience or an equivalent combination of education and experience.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 6:30 AM - 3:00 AM

    MISCELLANEOUS:
    The candidate selected to fill this assignment must successfully pass a credit check performed by client.

     
    Job Number: 177209
    Job Location: El Segundo, CA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 02/15/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Chelsie Goodreau
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cgoodreau@chiptonross.com
    Website: www.chiptonross.com

    Facilities Project Administrator 3

    Description:
    Chipton-Ross is seeking a Facilities Project Admin 3 located in Puyallup, WA

    RESPONSIBILITIES:
    Evaluates for major projects, contractor proposals for fair and reasonable cost. Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Provides guidance to less experienced employees. Obtains facilities design and resources commitments for major projects. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, and permits. Finalized work package will provide documents to implement the project. Provides guidance to less experienced employees. Evaluates requests and meet with customer to define requirements for major projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements. Creates layouts and conceptual designs. Ensures compliance with Client and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Provides guidance to less experienced employees. On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Provides guidance to less experienced employees. On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Provides guidance to less experienced employees. Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Logs requests into work management system in order to document, track, and perform work

    EDUCATION:
    Accredited Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

    WORK HOURS:
    Full-Time/First Shift
    7 AM - 4 PM

    Travel Required - Possible travel in between the Auburn and Frederickson sites

     
    Job Number: 176634
    Job Location: Puyallup, WA
    Rate: $DOE
    Duration: 12 MONTHS
    Input Date: 01/28/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: LaVada Pulley
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: lpulley@chiptonross.com
    Website: www.chiptonross.com

    Facilities Project Administrator 4

    Description:
    Chipton-Ross is seeking a Facilities Project Admin 4 located in Auburn, WA

    RESPONSIBILITIES:
    Directs construction of contract strategy and approves contracts for high-impact projects. Evaluates contractor proposals for fair and reasonable cost. Administers contractor activities. Participate in contractor selection, contract change negotiations, constructability reviews, and cost/schedule visibility such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Oversees and lends technical expertise to less experienced employees. Directs and integrates high-impact facilities projects. Obtains facilities design and resources commitments. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, and permits. Finalized work package will provide documents to implement the project. Oversees and lend technical expertise to less experienced employees. Evaluates requests and meet with customer to define requirements for high-impact projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements. Creates layouts and conceptual designs. Ensures compliance with Client and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Oversees and lends technical expertise to less experienced employees. Directs and ensure completion and retention of records for high-impact projects by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Oversees and lend technical expertise to less experienced employees. Directs and integrates high-impact project implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Oversees and lend technical expertise to less experienced employees. Receives customer requests for high-impact facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Assigns priorities and logs request into work management system in order to document, track, and perform work.

    EDUCATION:
    Accredited Bachelor's degree and typically 10 or more years' related work experience, a Master's degree and typically 8 or more years' related work experience or an equivalent combination of education and experience.

    WORK HOURS:
    Full-Time/First Shift
    7:00 AM - 3:30 PM

    MISCELLANEOUS:
    The candidate selected to fill this assignment must successfully pass a credit check performed by the client.

     
    Job Number: 177572
    Job Location: Auburn, WA
    Rate: $DOE
    Duration: 10 MONTHS
    Input Date: 02/28/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Chelsie Goodreau
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cgoodreau@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facility Maintenance Planner

    Description:
    Location: Vandenberg AFB (Lompoc), CA
    Rate: $30.50/HR
    Duration: 1 year contract

    ****MUST be a U.S. Citizen or Permanent Resident****

    Requirements:
    1. Seeking an organized detailed oriented individual who can work successfully in a dynamic launch site environment.
    2. Seeking an individual who can work well alone or as part of a team.
    3. Required to be proficient in a computer related field. Information Technology, Programming, or other Database Management field.
    4. Looking of 3+ yrs of experience.
    5. EAM / 7i experience desired.
    6. Database management and experience preferred.
    7. Attention to detail and consistency are pivotal for proper database management.

    Job Description:
    1. Member of our clients Operations Engineering and Infrastructure (E&I) organization, whose responsibilities include the design, operation, maintenance, and system evolution of all launch site facility and facility support systems, including Environmental Control & HVAC, Facility Electrical/Power, Communications and Data Networks, and Structural/Mechanical ground systems.

    Maintenance Planning Role:
    1. Identifies, coordinates, plans, schedules and executes preventive and predictive maintenance for facilities equipment, tooling and machinery.
    2. Recommends modifications of existing equipment and facilities and the possible replacement of existing equipment, which will improve operations and reduce maintenance costs.
    3. Ensures maintenance of records to document safe and efficient operation of equipment and facilities.

    Responsibilities:
    1. Responsibilities include planning and scheduling of facility maintenance tasks associated with Launch sites at VAFB.
    2. Communicates with Engineering and Technicians to ensure accurate and timely maintenance.
    3. Provides work orders to execute on-time support required for testing/launch processing activities for 100% Mission Success.
    4. Supports commonality of Maintenance planning processes across all product lines and work locations.
    5. Provides accurate metrics of maintenance activities to support management reviews and presentations. 6. Support and manage electronic files to ensure security and integrity of the work being generated.
    7. Assists Engineering with procedure creation and/or update existing documents to meet organizational goals.
    8. Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
    9. Proficient knowledge in Microsoft Office Suite.

    Education:
    1. Requires a bachelor’s degree and 2 - 6 years of experience
     
    Job Number: 10625
    Job Location: Lompoc, CA
    Rate: $30.50/HR
    Per Diem: Split Possible
    Duration: 1 yr
    Input Date: 03/13/2019
    Last Updated: 04/29/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Firmware engineer

    Description:
    Seeking an Electrical Design & Analysis Engineer with an emphasis on firmware development to join the Advanced Navigation and Processors team.

    Position Responsibilities:
    Your duties as a firmware engineer will include (but are not limited to):
    • Develop and maintain detailed requirements and specifications for FPGAs (Field Programmable Gate Array) and/or SoCs (System on Chip) implemented on processing platforms.
    • Provide engineering support throughout the lifecycle of the processor circuit card assembly (CCA) design, conduct trade studies and literature research to support future product designs

    Looking for candidates with experience in the following areas:
    • Electrical / electronics engineer for VHDL coding of Field Programmable Gate Arrays (FPGA) and SoCs
    • Design experience and implementation of high-performance digital signal processing hardware using FPGAs.
    • Build and use of verification test benches
    • Experience with Xilinx and/or Altera devices and tools such as Xilinx Vivado and ChipScope are desired.
    • Hands-on experience of programming over JTAG and bring-up in a lab environment, gathering data for technical performance measures and performing basic analysis.
    • Basic understanding of the following interfaces: RS-232, RS-422, RS-485, UART, PCIe, Ethernet, 1553 bus, CAN bus, AXI bus interface (xilinx specific), memory interfaces (nand flash, DDR2, DDR3)
    • Version control utilities

    Education:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: FIRMWARE2019
    Job Location: Saint Charles, MO
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 03/25/2019
    Last Updated: 04/12/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Flight Test Instrument Engineer

    Description:
    Flight Test Instrument Engineer

    Windsor Locks, CT
    $67/hr
    1 year W2 contract
    First Shift

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

    Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

    Typical Duties:
    Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

    Experience with advanced electrical instrumentation and data acquisition systems is required.
    Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
    Applicant must have the capability of working independently and be self-motivated.
    Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

    -Bachelors degree required
     
    Job Number: 10744
    Job Location: Windsor Locks, CT
    Rate: 67
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 04/05/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
    Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
    This can involve testing, data analysis, and interface with all aspects of the engineering department.
    Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing,Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
    Experience with advanced electrical instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
    Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required.
    Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: CT48505
    Job Location: Windsor Locks, CT, CT
    Rate: 65.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Input Date: 04/05/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fuel Cell Tech Level - 3 MA

    Description:
    164449 Fuel Cell Tech Level - 3

    Requirement#
    STTTM-REQ-0398
    Work Location
    Cambridge, MA
    Work Week
    9/80
    Priority
    High
    Needed Date
    04/01/2019
    End Date
    04/03/2020
    Number of Resources
    1


    --
    Job Description
    Type of Service
    Technical Services
    Title
    Fuel Cell Tech Level - 3


    Description
    Technician who is able to install, repair, or maintain fuel-cell based devices.

    Skill/Experience/Education
    Mandatory
    • High School diploma and additional specialized training equivalent to an Associate degree in a field of science or engineering.
    • Five (5) or more years of lab or testing experience.
    • A basic understanding of chemistry, simple electronics, and computer driven data acquisition/analysis is desirable.
    • Ability to read, understand, and follow detailed SOPs and other test documentation required.
    • Demonstrated communication and data reporting skills (written and verbal). Experience with MS Office family of products desired.
    • Ability to operate safely within a laboratory environment that complies with company chemical hygiene policies and laboratory best practices.

    Desired
    • Associates degree or Bachelors of Arts/Science in a field of science or engineering.
    • Experience troubleshooting chemical, mechanical, or instrumentation systems.
    • Prior experience in electrochemistry or the energy storage field a plus.
    • Experience with commercial battery testers and/or scientific DAQ systems a strong plus.
    • A strong attention to detail and experience with documentation is crucial.

    Skills
    Testing Battery Testing 4-5 Years Yes
    Testing Battery Testing No N/A No


    Rate Information
    Interview Required
    Yes
    Min Pay Rate
    30.00 USD
    Max Pay Rate
    40.00 USD

    Shift
    1st Shift
    OT Allowed
    Yes (OT Limitation: No)
    Travel
    No
     
    Job Number: JE-0398
    Job Location: Cambridge, MA
    Rate: 30-40/hr DOE
    Per Diem: no
    Duration: 12 months
    Input Date: 03/26/2019
    Last Updated: 04/15/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeane Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Guidance Nav & Control Engr 4 (2) - CA

    Description:
    Chipton-Ross is seeking 2 Guidance Nav & Control Engineer 4's located in Long Beach, CA.

    RESPONSIBILITIES:
    Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction. Responsibilities include:
    * Eliciting and defiELEFning the software requirements.
    * Designing, implementing, and integrating a solution to meet the requirements.
    * Planning and executing the validation of the requirements and verification of the solution.
    * The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

    REQUIRED EXPERIENCE:
    Emebedded Software Development - Preferred - Intermediate
    FAA certification requirements - Preferred - Intermediate
    Simulink - Required - Intermediate
    Version Control - Required - Intermediate
    Requirements Development - Preferred - Intermediate

    EDUCATION:
    Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM
     
    Job Number: 175823
    Job Location: Long Beach, CA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 12/14/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    Guidance Navigation & Control Engineer (Embedded Software Development)

    Description:
    Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

    Responsibilities include:
    • Eliciting and defining the software requirements.
    • Designing, implementing, and integrating a solution to meet the requirements.
    • Planning and executing the validation of the requirements and verification of the solution.
    • The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

    Area of Expertise:
    •Embedded Software Development
    •FAA certification requirements

    Technical Skills:
    •Simulink
    •Version Control
    •Requirements Development
     
    Job Number: GNCDEC
    Job Location: Long Beach, CA
    Rate: Best in Market
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 03/25/2019
    Last Updated: 05/17/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    INSTRUMENT AND CONTROLS ENGINEER

    Description:
    INSTRUMENT AND CONTROLS ENGINEER



    Ponca City Refinery:

    The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



    Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

    Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


     

    Description:

    The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

     

    The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

     

    Responsibilities may include:



    • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

    • Identifying areas where instrumentation/controls can improve plant operation and profitability

    • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

    • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

    • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

    • Supporting criticality assessments of the plant's instrumentation equipment

    • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

    • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

    • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

    • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

    • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

    • Performing audits of instrumentation installations and process control loops including failure analysis inspections

    • Interacting with engineering and construction contractors, both on- site and off- site

    • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

    • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

    • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

    • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


    QUALIFICATIONS

     

    Basic/Required:  



    • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

    • 3+ years of experience in a refinery and/or chemical industry

    • 3+ years of direct experience in process instrumentation design and/or maintenance.


     

    Preferred:  



    • Knowledge of the Ponca City Refinery instrumentation asset base.

    • Proficient in use of SAP - PM & PS Modules

    • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

    • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

    • Expert knowledge of field instrumentation and controls through design and field installation experience

    • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

    • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

    • Demonstrated knowledge and use of SPI (InTools) database and specifications

    • Strong analytical skills including statistical analysis

    • Strong interpersonal and written communication skills

    • Ability to lead execution of work and resolve issues in a team environment

    • Accepts ownership, is accountable, and delivers on commitments


    Ability to work in cross-functional teams

     


     




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

     
     
    Job Number: 18-50643
    Job Location: Ponca City, OK
    Rate: 0.0USD/Hour
    Per Diem: --
    Overtime: --
    Start Date: 2018-12-04 00:00:00.0
    Input Date: 12/04/2018
    Last Updated: 05/21/2019
    Firm Name: NESCO RESOURCE
    Attention: Kristy Thompson
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Email: cjhunter.nesco@jobdivaemail.com
    Website: www.nescoresource.com

    Industrial Electrician

    Description:
    Primary Responsibilities:
    All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
     
    Position Requirements:
    High school diploma or equivalent (GED) required.
    2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
    Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
     
     
    Job Number: 1910100719
    Job Location: De Pere, WI
    Duration: 6 months
    Input Date: 04/11/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Electrician

    Description:
    Direct hire opportunity in Casa Grande for an electrician to work within a manufacturing environment.

    HS diploma or GED

    minimum 5 years experience as qualified journeyman level Electrician or Electronic Technician in manufacturing

    6am-6pm Th, Fr, Sa and every other Sunday

    • Installs and maintains 480, 240, 120 AC systems and low voltage electrical systems.

    • Interprets and follows electronic drawings, schematics, P&IDs, and simple ladder logic.

    • Disassembles equipment as necessary and repair or replace faulty components.

    • Makes electrical and electronic repairs or improvements to a variety of process controls, unit operations, and equipment.

    • Analyzes deficiencies in electrical and electronic equipment to determine cause of problems.

    • Installs, trouble shoots and maintains motor controls, S.C.R. drives, dielectric heating presses, pulse counters, pH monitor, electronic controls on oven presses and all other electrical and electronic equipment used in plant.

    • Maintains, repairs, and installs new gas trains and burners.

    • Fabricates replacement parts and supports.

    • Services and repairs lift trucks and other powered carts as necessary.

    • Participates in writing and constructing job plans, preventative maintenance procedures and root cause analysis.

    • Works on weekends and holidays when requested.

    • Must have full working set of essential electrician tools.

    • Ensures that products meet customer specifications and expectations.

    • Works in a team environment to reach consensus decisions within the guidelines and boundaries established by the company, and maintains constructive relationships with co-workers.

    • Operates at all times in compliance with the Quality System and Quality Policy.




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
     
    Job Number: 19-11085
    Job Location: Casa Grande, AZ
    Rate: 0.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: Direct
    Start Date: 2019-04-01 00:00:00.0
    Input Date: 03/18/2019
    Last Updated: 04/23/2019
    Firm Name: NESCO RESOURCE
    Attention: Camille Hannes
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    Industrial Electrician

    Description:
    Primary Responsibilities:
    All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
     
    Position Requirements:
    High school diploma or equivalent (GED) required.
    2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
    Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
     
     
    Job Number: 1810094541
    Job Location: Manitowoc, WI
    Duration: 6 months
    Input Date: 10/31/2018
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

    Integration Specialist Technician

    Description:
    Chipton-Ross is seeking 4 Integration Specialist Technicians located in Huntsville, AL

    RESPONSIBILITIES:
    Perform assigned duties as an individual or as a member of a cross functional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability. Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches. Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of Box assemblies & subassemblies, through final integration. Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document non-conformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems. Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements. Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action. May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    Full-Time/First Shift
    6:00 AM - 2:30 PM

    MISCELLANEOUS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

    Contractors must be able willing to work 1st or 2nd shift.

     
    Job Number: 177983
    Job Location: Huntsville, AL
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/18/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Integration Specialist Technician

    Description:
    Chipton-Ross is seeking 6 Integration Specialist Technicians located in Huntsville, AL.

    RESPONSIBILITIES:
    Perform assigned duties as an individual or as a member of a cross functional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability. Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches. Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration. Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document non-conformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems. Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements. Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action. May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment.

    REQUIRED EXPERIENCE:
    Previous experience with electronics, wire harness build, strain gage, soldering.

    EDUCATION:
    Accredited High School Diploma/GED

    TRAVEL: YES
    Occasional travel to New Orleans and/or Kennedy Space Center MAY be required up to period of 28 consecutive days.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 6:00 AM - 2:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    ADDITIONAL REQUIREMENTS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

    Vision Test required
     
    Job Number: 177779
    Job Location: Huntsville, AL
    Rate: $DOE
    Duration: 3 Months
    Input Date: 03/11/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Job Opening for Manufacturing Planner

    Description:
    Manufacturing Planner 5

    Location: Berkeley, MO
    Duration: 1 year

    Description:
    Plans and leads teams that support implementation of strategic business initiatives and manufacturing and tooling enhancements. Analyzes new technologies, concepts and processes that simplify and improve manufacturing processes. Supports benchmarking of industry to determine best practices. Leads integration of major, complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops unique and innovative tooling requirements in alignment with strategic initiatives. Establishes processes for managing tooling from initial design to end of use disposition. Leads investigations of critical manufacturing related issues. Develops and implements solutions involving a broad range of internal and external stakeholders. Supports benchmarking of advanced applications and methodologies to support producibility improvements. Researches and develops unique and innovative manufacturing concepts. Influences the design to ensure efficient manufacturing and optimum value. Presents business case/trade study recommendations to leadership for review. Leads development of complex work statements and sequencing of events to support delivery commitments. Performs high level analysis of schedule and work statement processes to identify and mitigate manufacturing risks. Researches, develops and implements of new manufacturing processes to support long-range goals and strategic initiatives. Works under consultative direction. Desired skills include Experience with 3D model-based instruction. Experience in use of test programs for checkout of electrical assemblies. Experience in the manufacturing build process and installation of complex wiring harness assemblies.

    Education / Experience:
    AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.

    Skill Code:
    67B-Electrical/Electronics
     
    Job Location: Berkeley, MO
    Per Diem: Split
    Duration: 12 months
    Start Date: ASAP
    Input Date: 03/18/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Anusha Vuta
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: anusha@iconma.com
    Website: iconma.com

    Jr. Avionics Systems Engineer

    Description:
    General Summary:
    The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


    Duties and Responsibilities:
    • Define, plan, and develop complex systems level requirements to support the avionic systems.
    • Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
    • Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
    • Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
    • Perform system evaluation and analysis to verify the system design compliance with functional requirements
    • Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
    • Develop targeted system level enhancements to address customer feedback and product improvement initiatives
    • Conduct system lab testing and aircraft functional testing
    • Prepare presentations on avionics system design/development status
    • Support system analyses for avionic systems
    Qualifications


    Education, Work Experience, Certification and/or Licensure:
    • Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
    • Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


    Knowledge, Skills and Abilities:
    • Working knowledge of design requirements of 14CFRPart 23
    • Proficiency in writing technical documentation and reports involving test data and analysis
    • Familiarity with avionics/electrical test laboratories and lab equipment
    • Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
    • Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
    • Proficiency in requirements management tools such as DOORS
    • Proficiency in PLM Tools such as TeamCenter and SAP
    • Ability to handle complex work assignments
    • Ability to work independently and within a multi-functional team environment




    The Structures Company, LLC is an AA/EOE.
     
    Job Number: 296
    Job Location: NC
    Rate: $50/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 04/18/2019
    Last Updated: 05/21/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Logistics Management Analyst

    Description:
    Logistics Management Analyst
    Location: Fort Worth, TX
    Pay Rate: $39.41
    Duration: 1 Year
    Shift: First
    **MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

    Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

    Position’s primary responsibilities will include assisting Import Control with classifying items pending import classification instructions, proactively classifying items currently in SAP GTS system not assigned US HTS, reviewing currently assigned HTS classifications and updating as necessary, remaining current with legislative changes in additional tariff classifications as well as scheduled updates/changes to HTSUS and maintaining necessary updates and notations in SAP/GTS, identifying and gaining access to proprietary information databases for the purposes of classification, evaluating and providing guidance on use of chapter 9801-9802 provisions, providing internal training on advanced classification topics. In addition, position may perform research and assist in determining eligibility for foreign trade agreements, determine participating government agency regulation, applicability of ADD/CVD regulations, partner with different internal groups to support project work.

    • Classify items previously not imported under HTSUS
    • Review current HTSUS classifications to vet or correct as needed
    • partner with export classification specialist for project/assistance
    • partner with other business units for projects as needed
    • provide training to Import Control teammates
    • Remain current in all additional specialized tariffs
    • Partner with ITC and Brokerage firms to determine OGA status
    • Maintain GTS HTS classifications, including additional regulations such as ADD/CVD, specialized tariffs, relevant binding rulings, and information specific to the product in GTS notes
    • Potentially assist in evaluate FTA feasibility, work with programs to obtain necessary documentation, maintain yearly blanket documentation
    • Potentially Maintain and provide to forwarders FTA blanket statements
    • Potentially support B schedule import activities


    Education/ Experience:
    Bachelor’s degree in legal, business management, or supply chain.

    At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision
    Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes.
    Expertise in utilizing explanatory notes, published binding rulings, informed compliance publications, customs bulletins
    Expertise in understanding Federal Code of Regulations Title 19 part 10 and 152 as it applies to requirements of classification and applying it to specific classification scenarios.
    Experience in understanding detailed product literature and determining best contact group for clarification and additional details.
    Previous work employed by an importer preferred.
    Exceptional written and verbal communication skills.
    Project management experience preferred.
    Ability to work independently while integrating projects with wider team environment required.
    High level of reading comprehension required.
    Meticulous attention to detail.
    Adept at working professionally with personnel of different knowledge, skill sets, and priorities required.
    Experience with Microsoft Office suite required.
    Experience with SAP / GTS preferred
    Experience Classifying items previously not imported under HTSUS Experience Reviewing current HTSUS classifications to vet or correct as needed At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes

    Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 10485
    Job Location: Fort Worth, TX
    Rate: 39.41
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 03/06/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst

    Description:
    Logistics Management Analyst
    Location: Fort Worth, TX
    Pay Rate: $39.41
    Duration: 1 Year
    Shift: First
    **MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

    Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
    Desired knowledge, skills and expertise:
    - Export Licensing, Documentation & Logistics
    - EAR/ITAR Jurisdiction Determination,
    - Schedule B / Harmonized Tariff System (HTS) classification.
    - Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
    - International Incoterms, exporter of record and importer of record requirements
    - Global Trade Services (GTS) and SAP software.
    - IATA and DOT Dangerous Goods Regulations
    - Customs Clearance Process awareness

    Flexible working hours required
    SAP - 1+ years experience preferred
     
    Job Number: 10490
    Job Location: Fort Worth, TX
    Rate: 39.41
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 03/06/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Logistics Management Analyst TX

    Description:
    1389-1 Logistics Management Analyst
    Work Location: Fort Worth, TX
    Status: Open
    Submitted: 2/7/2019 5:08:41 PM

    Qty: 1
    Desired Start Date: 2/21/2019
    End Date: 2/20/2020

    Required experience:
    Experience with SAP / GTS
    Experience Classifying items previously not imported under HTSUS
    Experience Reviewing current HTSUS classifications to vet or correct as needed
    At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision
    Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes

    Job Description:
    Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

    Position’s primary responsibilities will include assisting Import Control with classifying items pending import classification instructions, proactively classifying items currently in SAP GTS system not assigned US HTS, reviewing currently assigned HTS classifications and updating as necessary, remaining current with legislative changes in additional tariff classifications as well as scheduled updates/changes to HTSUS and maintaining necessary updates and notations in SAP/GTS, identifying and gaining access to proprietary information databases for the purposes of classification, evaluating and providing guidance on use of chapter 9801-9802 provisions, providing internal training on advanced classification topics. In addition, position may perform research and assist in determining eligibility for foreign trade agreements, determine participating government agency regulation, applicability of ADD/CVD regulations, partner with different internal groups to support project work.

    • Classify items previously not imported under HTSUS
    • Review current HTSUS classifications to vet or correct as needed
    • partner with export classification specialist for project/assistance
    • partner with other business units for projects as needed
    • provide training to Import Control teammates
    • Remain current in all additional specialized tariffs
    • Partner with ITC and Brokerage firms to determine OGA status
    • Maintain GTS HTS classifications, including additional regulations such as ADD/CVD, specialized tariffs, relevant binding rulings, and information specific to the product in GTS notes
    • Potentially assist in evaluate FTA feasibility, work with programs to obtain necessary documentation, maintain yearly blanket documentation
    • Potentially Maintain and provide to forwarders FTA blanket statements
    • Potentially support B schedule import activities

    Bachelor’s degree in legal, business management, or supply chain.
    At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision

    Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes.
    Expertise in utilizing explanatory notes, published binding rulings, informed compliance publications, customs bulletins
    Expertise in understanding Federal Code of Regulations Title 19 part 10 and 152 as it applies to requirements of classification and applying it to specific classification scenarios.
    Experience in understanding detailed product literature and determining best contact group for clarification and additional details.
    Previous work employed by an importer preferred.
    Exceptional written and verbal communication skills.
    Project management experience preferred.
    Ability to work independently while integrating projects with wider team environment required.
    High level of reading comprehension required.
    Meticulous attention to detail.
    Adept at working professionally with personnel of different knowledge, skill sets, and priorities required.
    Experience with Microsoft Office suite required.
    Experience with SAP / GTS preferred

    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $38.00 Hourly
     
    Job Number: JE-1389-1
    Job Location: Fort Worth, TX
    Rate: 38/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 05/03/2019
    Last Updated: 05/21/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst TX

    Description:
    163802
    1296-1 Logistics Management Analyst
    Work Location: Fort Worth, TX
    Status: Open

    Qty: 1
    Desired Start Date: 1/29/2019
    End Date: 1/28/2020

    Job Description:
    Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
    Desired knowledge, skills and expertise:
    - Export Licensing, Documentation & Logistics
    - EAR/ITAR Jurisdiction Determination,
    - Schedule B / Harmonized Tariff System (HTS) classification.
    - Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
    - International Incoterms, exporter of record and importer of record requirements
    - Global Trade Services (GTS) and SAP software.
    - IATA and DOT Dangerous Goods Regulations
    - Customs Clearance Process awareness

    **Flexible working hours required

    Region: Fort Worth, TX
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $38.00 Hourly

    Experience
    Software Skills SAP No 1
     
    Job Number: JE-1296-1
    Job Location: Fort Worth, TX
    Rate: 38/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 03/06/2019
    Last Updated: 04/22/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Logistics Support Specialist

    Description:
    PDS Tech Inc. is seeking a Logistics Support Specialist, in Centennial, CO.
    Summary:
    • Provides unit, intermediate, and depot level parts and supply support for CLS program.
    • Monitors loans for internal and external customers, maintenance of inventory records along with spares and repair information in the Big Safari Inventory (BSI) and M3 maintenance system, conducts physical inventories, manages the Due-In-From-Maintenance (DIFM) program, manages the Document Control program, manages the Mission Support Kits (MSK) program, and arranges transportation/distribution actions 
    • Inspects and identifies property and conditions of property received
    • Compares property with procurement specifications 
    • Performs functional check/calibration inspections of stock
    • Tracks shelf life & calibration items
    • Issues and transfers property
    • Issues, ships, or transfers of property; shipping, transfer of property destination points through coordination with customers
    • Controls issue of classified sensitive and controlled items, obtaining custody or document receipts
    • Compiles data for storage and occupancy planning reports. Pulls, issues, and bins property
    • Support and Test equipment: Warehouses, inventories, provides disposition to customer and vendors, updates customer/Director of Maintenance on test equipment calibration schedule.
    • Packaging, handling, storage and transportation (PHS&T): Ensures assets are protected, packaged correctly, stored, inventoried in accordance with proper procedures when maintaining government furnished equipment/purchased material
    • Plans and procures by the fastest most economical means of transportation to support customer requirements
    • Conducts warehouse validations; ensure each assigned location is valid, contains the correct part(s), and that all assets are properly identified and labeled with the correct condition tag according to all directives
    • Responsible for conducting and reporting of Inventory, Property, and "Bailed" property records and systems
    • Coordinates with customers, Quality Assurance, buyers, planners, and vendors on disposition

    EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
    • High School Diploma
    • Minimum 4-10 years of experience.
    • Experience with the M3 system & BSI systems a plus.
    • Experience working with MS Word, Excel, PowerPoint.
    • Experience maintaining database systems including both electronic and hardcopy filing systems.
    • Knowledge of standard office policies & procedures. 
    • Knowledge & ability to operate office equipment including e-mail, fax, copy machines.
    • Ability to operate a personal computer terminal with a visual display unit and printer.
    • Teamwork and communication skills to ensure coordination of maintenance actions within organization.
    • Skilled in word processing/typing. 

    Clearance:

    • Must have ability to obtain a clearance or have an active Secret clearance

    Citizenship:

    • U.S. Citizenship Required

    ESSENTIAL FUNCTIONS:

    • Ability to lift, lower, push, pull, and carry up to 70 lbs; work on knees, bend, crouch, and reach over head.
    • Minimum physical requirements to perform all duties and responsibilities, as defined by management.

     ADDITIONAL RESPONSIBILITIES INCLUDE:

    •  Punctuality to work each day and prepared to work scheduled work hours
    • Other duties as assigned

     
    Job Number: 1810096361
    Job Location: Aurora, CO
    Duration: 6 months
    Input Date: 02/15/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r3q5QAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Machine & Tool Designer (Secret Clearance)

    Description:

     


    Compensation:        



    • OPEN

    • Per Diem is offered for qualified applicants


     


    Qualifications:        



    • DoD Secret Clearance required 

    • Design experience using 3D CAD systems (CATIA V5, NX) preferred 

    • NX experience preferred over CATIA V5 

    • Closed form and/or FEA stress analytical capability preferred 


     


    Day-to-Day Responsibilities:



    • Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs 

    • Concepts and designs special tooling within an Integrated Product Team structure 

    • Manages tooling technical, quality and schedule 

    • Uses and/or manages Computer Aided Design (CAD) resources for tooling design 

    • Works with vendors to ensure successful fabrication of tooling 

    • Witnesses source inspection of special tooling at fabrication locations 

    • Proofs tooling upon receipt 

    • Maintains tooling documentation related to design, fabrication and proofing 

    • Provides tooling estimates for new tools 


     


    Work Status Required:        



    • ACTIVE Secret Clearance Required


     


    Job Type:        



    • W2 Contract


     


    Duration:        



    • 1 Year+, with opportunity for extension and/or conversion to direct employee at any point after 3 months of employment


     


    Openings:        



    • 2


     


    About USPRO        



    • USPRO, a contract staffing agency located in Boston, MA, is a woman-owned and operated small business USPRO has built a solid reputation as a top provider of temporary and permanent hiring solutions in the aerospace/defense, healthcare and manufacturing industry. If you would like to know more please visit our website at www.uspro.net


     


    About Our Client        



    • USPRO's client, builds and delivers space, defense and aviation-related systems to customers around the world. Our main products include launch vehicles and related propulsion systems; missile products, subsystems and defense electronics; precision weapons, armament systems and ammunition; satellites and associated space components and services; and advanced aerospace structures. 


     
    Job Number: NG8752572
    Job Location: Clearfield, UT
    Rate: OPEN
    Per Diem: Split
    Overtime: Yes
    Duration: LT
    Start Date: ASAP
    Input Date: 04/08/2019
    Firm Name: NESC STAFFING
    Attention: Brad McInnis
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Technician

    Description:
    Nesco has a direct hire opportunity for a maintenance technicians on 2nd & 3rd shift 

    .2nd shift 2:30pm - 10pm and 3rd shift 10pm-6am



    ESSENTIAL RESPONSIBILITIES & DUTIES

    • Follow all safe workplace practices, comply with all applicable safety and health rules, and actively participate in safety programs.

    • Read and interpret schematic drawings and documentation and initiate revisions when applicable.

    • Follow daily work activities schedule to meet maintenance objectives. Estimate materials and time needed to complete activities to ensure completion of tasks.

    • Install, maintain and repair secondary electrical systems, such as but not limited to, general wiring, lighting and communication systems.

    • Install, maintain and troubleshoot power equipment systems.

    • Install, maintain and troubleshoot rotating equipment, motor drives and associated control systems.

    • Install, maintain and troubleshoot stand-by power systems and associated equipment.

    • Maintain and operate test and measuring instruments and equipment to determine functional operation of electronic and electrical systems.

    • Maintain and troubleshoot industrial instrumentation devices and associated systems.

    • Perform preventive and predictive maintenance as established by maintenance program.

    • Maintain documentation to record performance problems, repairs, calibrations, and tests.

    • Communicate with other departments to identify and troubleshoot equipment problems.

    • Trains and provides subject matter expertise to Industrial Electricians.

    • Responsible for immediately reporting any safety, quality or plant security issues to management for appropriate action




    ESSENTIAL SKILLS & ABILITY


    • Problem solving—identifies and resolves problems in a timely manner, gathers and analyzes information skillfully.




    • Planning/organizing—prioritizes and plans work and uses time efficiently. Attention to detail, organized, able to meet deadlines.




    • Quantity—meets productivity standards and completes work in a timely manner.




    • Adaptability—adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events. Can function as a self-starter with the ability to work independently.




    • Dependability—consistently at work and on time, follows instructions and responds to management direction.

    • Safety and security—observes safety and security procedures and uses equipment and materials properly. Ability to read and interpret safety rules and instructions which are posted in English.

    • Communication - effectively and professionally conveys information internally and externally through verbal and written communication skills. Actively listens, communicates clearly, concisely and assures understanding.

    • Ability to calculate figures and amounts, add, subtract, multiply and divide numbers.

    • Function as a self-starter with the ability to work independently.

    • Detail-oriented and organized, able to work in a fast-pace environment and meet deadlines.

    • A demonstrated ability to prioritize, follow through, and manage multiple projects.

    • Ability to read and interpret safety rules and instructions which are posted in English
















    ESSENTIAL QUALIFICATIONS, KNOWLEDGE & EXPERIENCE


    • High school diploma or GED

    • Associate's Degree (two year college or technical school) in Industrial Technology or similar field; or completion of recognized apprenticeship as maintenance; or equivalent work experience or vocational training is preferred.

    • 4 plus years of relevant maintenance experience.

    • Knowledge of basic instrumentation and calibration, preferred.

    • Experience in a manufacturing or industrial environment, preferred.

    • Basic proficiency in Microsoft Office

    • Knowledge of Programmable Logic Controllers

    • Knowledge of computerized maintenance management systems (CMMS), preferred.

    • Electrical Certification preferred.

    • Ability to work flexible days and hours to support business needs




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
     
    Job Number: 19-14292
    Job Location: Phoenix, AZ
    Rate: 25.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: Direct
    Start Date: 2019-04-08 00:00:00.0
    Input Date: 04/08/2019
    Last Updated: 05/07/2019
    Firm Name: NESCO RESOURCE
    Attention: Camille Hannes
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing / Electrical Engineer

    Description:
    Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

    Manufacturing / Electrical Engineer
    (US Citizenship Required*)
    State College, PA
    2019-8483

    Responsibilities:
    • Provide manufacturing / electrical engineering support to new and existing product lines
    • Assist in the design and refinement of new and existing products
    • Assist in the setup of production assembly processes and flow
    • Performs electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
    • Participates in internal electrical reviews of electrical components, equipment and systems
    • Supports the generation of technical documents for use on the manufacturing floor
    • Participates in the selection of components and equipment based on analysis of requirements
    • Lead and participate in continuous improvement projects
    • Develop fixtures and tooling as needed

    Qualifications:
    • Clear understanding of electronics manufacturing processes
    • Clear understanding of electrical engineering concepts, principles, and theories
    • Ability to use engineering design software and CAD tools
    • Clear understanding of Microsoft Office applications
    • Clear written and verbal communications skills
    • Ability to recognize and clearly report information relevant to sound engineering design
    • Ability to work well in a team environment
    • Ability to develop innovative methods and solutions
    • Ability to be adaptable and flexible
    • Some travel may be required
    *US Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor's degree in Electrical Engineering, a related specialized area or field, or equivalent experience is required

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8483
    Job Location: State College, PA
    Rate: Based on experience
    Input Date: 04/11/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: jobs@moseleytechnical.com
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Manufacturing Engineer 2

    Description:
    PDS Tech, Inc. is seeking a Manufacturing Engineer in Heath, OH.

    Summary:

    • Assists in the development and implementation of production and tooling methodologies.
    • Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions.
    • Primary responsibility will be to work with Operations and Engineering group to generate planning for repair and maintenance operations on electronic devices from Line Replaceable units down to circuit card levels.
    • Will include all levels of planning to return units to operational configuration.
    • Experience with I gold or Gold ESP is a plus but not required.
    • Prefer experience creating detailed planning instructions from drawings and schematics.

    Prerequisites:
    • Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.


    CategoryNameRequired  
    Technical SkillsInterpret schematics, assembly drawings, technical manualsNo   
    Technical SkillsProcess PlanningNo

     
    Job Number: 1910099314
    Job Location: Heath, OH
    Duration: 6 months
    Input Date: 03/27/2019
    Last Updated: 05/22/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Shannon White
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWDFQA2&URLSource=cjhunter

    Manufacturing Engineer 2

    Description:
    Chipton-Ross is seeking 2 Manufacturing Engineer 2's located in Heath, OH.

    RESPONSIBILITIES:
    Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Primary responsibility will be to work with Operations and Engineering group to generate planning for repair and maintenance operations on electronic devices from Line Replaceable units down to circuit card levels. Will include all levels of planning to return units to operational configuration. Experience with I gold or Gold ESP is a plus but not required. Prefer experience creating detailed planning instructions from drawings and schematics.

    SOFT REQUIREMENTS:
    Technical Skills Interpret schematics, assembly drawings, technical manuals
    Technical Skills Process Planning

    EDUCATION:
    Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification

    WORK HOURS:
    Full-Time/First Shift
    7:00 AM - 3:30 PM
     
    Job Number: 177732
    Job Location: Heath, OH
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/22/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    Manufacturing Engineer 2 (Electrical/ Electronics )

    Description:
    Manufacturing Engineer 2

    Location: Heath, OH
    Duration: 6 months

    Job Description:
    Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Primary responsibility will be to work with Operations and Engineering group to generate planning for repair and maintenance operations on electronic devices from Line Replaceable units down to circuit card levels. Will include all levels of planning to return units to operational configuration. Experience with I gold or Gold ESP is a plus but not required. Prefer experience creating detailed planning instructions from drawings and schematics.

    Education / Experience:
    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

    Skills:
    Category Name Required
    Technical Skills Interpret schematics, assembly drawings, technical manuals No
    Technical Skills Process Planning No

    Skill Code: 66T-Electrical/Electronics
     
    Job Location: Heath, OH
    Per Diem: Split
    Duration: 6
    Start Date: ASAP
    Input Date: 03/15/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Anusha Vuta
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: anusha@iconma.com
    Website: iconma.com

    Manufacturing Planner- Electrical

    Description:
    Manufacturing Planner 3

    Location: Everett, WA
    Duration: 6+ Months

    Description:
    Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

    Education / Experience:
    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    Position Comments:
    This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

    Skill Code: 67B-Electrical/Electronics
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: Asap
    Input Date: 01/10/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Email: mzoheb@iconma.com
    Website: iconma.com

    Material Handler

    Description:
    Chipton-Ross is seeking a Material Handler for an opening in Redmond, WA.

    RESPONSIBILITIES:
    25% - Records information regarding materials received and shipped in the department computer system.
    10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
    20% - Packaging and handling materials within company guidelines.
    10% - Counting and/or weighing incoming parts to verify receipt.
    25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

    REQUIRED EXPERIENCE:
    1 year of related experience
    Experience operating forklift (or has the ability/desire to become certified) , pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs

    PREFERRED EXPERIENCE:
    Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80 , 6:00am to 3:30pm shift
    Full-Time

     
    Job Number: 178251
    Job Location: Redmond, WA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/27/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Cody Reposa
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: creposa@chiptonross.com
    Website: www.chiptonross.com

    Material Handler I

    Description:
    Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

    RESPONSIBILITIES:
    25% - Records information regarding materials received and shipped in the department computer system.
    10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
    20% - Packaging and handling materials within company guidelines.
    10% - Counting and/or weighing incoming parts to verify receipt.
    25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

    REQUIRED EXPERIENCE:
    1 year of related experience
    Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
    BOX TRUCK
    ERP
    EXCEL
    FORKLIFT
    MATERIAL HANDLER
    Additional Skills:
    MATERIAL HANDLING
    MATERIAL HANDLING EQUIPMENT
    MRP
    MS OFFICE
    OUTLOOK
    AEROSPACE
    CONVEYOR
    ENTERPRISE RESOURCE PLANNING
    ESD
    KITTING
    MICROSOFT EXCEL
    MICROSOFT OFFICE
    MICROSOFT OUTLOOK
    ORACLE
    PACKAGING
    SHIPPING

    PREFERRED EXPERIENCE:
    Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80 , 6:00am to 3:30pm Shift
    Full-Time

     
    Job Number: 170803
    Job Location: Redmond, WA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 05/07/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Cody Reposa
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: creposa@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer/Drafter

    Description:
    Location: Phoenix, AZ
    Rate: $39.00/HR
    Duration: 6 month contract
    Per Diem Split: No

    ****MUST be a U.S. Citizen or Permanent Resident****
    **** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

    Job Description:
    - Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
    - Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
    - Will interface with other engineering groups to insure design requirements are fulfilled.
    - The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
    - The position will work with cross functional teams to resolve issues.

    Responsibilities may include:
    - Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
    - May include utilization of computer aided design applications.
    - New product development from concept through production.
    - Generate detailed solid models and engineering drawings.
    - Processing documents through document change system.

    Qualifications
    - Minimum 8 years mechanical design experience required.
    - H.S. Diploma required.
    - Related technical degree a plus.
    - Minimum 8 years solid modeling experience.
    - Siemens NX11 a plus.
    - Experience with Siemens Teamcenter PLM Software.
    - Strong knowledge of GD&T ASME Y14.5.
    - A background working on avionics design related experience a plus.
    - Strong knowledge of manufacturing processes.
    - Familiarity with DO-160 and DO-254 development guidelines a plus.
    - Applicant should be highly motivated, with demonstrated leadership and communication skills.
    - Close attention to detail required.
    - Must be a US citizen or permanent resident.
    - Good organization and planning skills required.
    - Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
     
    Job Number: 10668
    Job Location: Phoenix, AZ
    Rate: $39.00/HR
    Per Diem: No
    Overtime: Possible
    Duration: 6 mos
    Input Date: 03/28/2019
    Last Updated: 04/15/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Engineer III

    Description:
    Position Purpose:
    Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Unique Skills:
    • Strong 5-axis programming background in CATIA V5.
    • Master Cam knowledge preferred.
    • Vericut Knowledge preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

    Principle Duties and Responsibilities:
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator set-up sheets for numerical control machines.
    • Develop flat pattern mylars and templates as required.
    • Produce 2-D Catia tool drawings as required.
    • May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
    • Assist in training and guiding lower level engineers as needed.
    • Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.
    • Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
     
    Job Number: 24-348
    Job Location: Savannah, GA
    Rate: $60
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 04/02/2019
    Last Updated: 05/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Engineer III

    Description:
    NC Engineer III

    Location: Savannah, GA
    Rate: $60.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Strong 5-axis programming background in CATIA V5.
    - Master Cam knowledge preferred.
    - Vericut Knowledge preferred.

    Education and Experience Requirements:
    - Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    - Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

    Position Purpose:
    Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    5. Develop operator set-up sheets for numerical control machines.
    6. Develop flat pattern mylars and templates as required.
    7. Produce 2-D Catia tool drawings as required.
    8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

    Additional Functions:
    1. Assist in training and guiding lower level engineers as needed.
    2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

    Other Requirements:
    1. Excellent verbal and written communication skills required.
    2. Strong knowledge of various machining and drafting methods, technical writing, and computer use.
    3. Ability to read and interpret complex blueprints and engineering drawings.
    4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
    5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
     
    Job Number: 10533
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/19/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    NC Programmer I

    Description:
    Position Purpose:
    Under moderate supervision, perform duties related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Unique Skills:
    Familiar with or any experience in creating NC Products and NC Programs in CATIA V5 desired. Ability to navigate through SmarTeam. Knowledgeable of machining composite materials such as aluminum and fiberglass honeycomb panels and their associated cutting tools. Familiar with using Vericut for prove out of programs.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level.

    Principle Duties and Responsibilities:
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator’s set-up sheets for numerical control machines.
    • Produce Catia 2-D tool drawings as required. Perform other duties as assigned.
    • Good verbal and written communication skills required.
    • Must be able to read and interpret blueprints.
    • Familiarity with various machining methods, technical writing, and computer use.
    • Must possess good drafting, math, and geometry skills.
    • Must have basic knowledge of Catia.
     
    Job Number: 24-338
    Job Location: Savannah, GA
    Rate: $50/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 03/19/2019
    Last Updated: 05/21/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: brandon@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer III

    Description:
    Position Purpose:
    Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

    Principle Duties and Responsibilities:
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator set-up sheets for numerical control machines.
    • Develop flat pattern mylars and templates as required.
    • Produce 2-D Catia tool drawings as required.
    • May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
    • Assist in training and guiding lower level engineers as needed.
    • Assist in formulating Numerical Control policies, procedures, and specifications as required.
    • Perform other duties as assigned.

    Other Requirements:
    • Strong knowledge of various machining and drafting methods, technical writing, and computer use.
    • Ability to read and interpret complex blueprints and engineering drawings.
    • Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
    • Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
     
    Job Number: 24-350
    Job Location: Tulsa, OK
    Rate: $62.50/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 04/02/2019
    Last Updated: 05/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Numerical Control (NC) Engineer I

    Description:
    Location: Savannah, GA
    Rate: $50.00/HR
    Duration: Long Term Contract
    Shift: 4x10
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Familiar with or any experience in creating NC Products and NC Programs in CATIA V5 desired.
    - Ability to navigate through Smarteam.
    - Knowledgeable of machining composite materials such as aluminum and fiberglass honeycomb panels and their associated cutting tools.
    - Familiar with using Vericut for proves out of programs.

    Education and Experience Requirements:
    - Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Position Purpose:
    - Under moderate supervision, perform duties related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    5. Develop operator's set-up sheets for numerical control machines.
    6. Produce Catia 2-D tool drawings as required. Perform other duties as assigned.

    Other Requirements:
    1. Good verbal and written communication skills required.
    2. Must be able to read and interpret blueprints.
    3. Familiarity with various machining methods, technical writing, and computer use.
    4. Must possess good drafting, math, and geometry skills.
    5. Must have basic knowledge of Catia.
     
    Job Number: 10640
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/19/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Numerical Control Engineer I

    Description:
    **Shift is 4x10**

    Position Purpose:
    Under moderate supervision, perform duties related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Essential Functions:
    1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    5. Develop operators set-up sheets for numerical control machines.
    6. Produce Catia 2-D tool drawings as required. Perform other duties as assigned.
    Unique Skills:
    Familiar with or any experience in creating NC Products and NC Programs in CATIA V5 desired. Ability to navigate through SmarTeam. Knowledgeable of machining composite materials such as aluminum and fiberglass honeycomb panels and their associated cutting tools. Familiar with using Vericut for prove out of programs.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level.

    Other Requirements:
    1. Good verbal and written communication skills required.
    2. Must be able to read and interpret blueprints.
    3. Familiarity with various machining methods, technical writing, and computer use.
    4. Must possess good drafting, math, and geometry skills.
    5. Must have basic knowledge of Catia.
     
    Job Number: 373988
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 03/19/2019
    Last Updated: 05/21/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Office Administrator C

    Description:
    Chipton-Ross is seeking an Office Administrator C for an opportunity in El Segundo, CA.

    RESPONSIBILITIES:
    Performs the following tasks for managers on the executive payroll. Coordinates and processes domestic and international business travel arrangements, monitors designated business traveler's logistics, generates expense reports and assists in reconciling corporate credit card changes to ensure timely and accurate reimbursement and verifies payments to corporate credit cards. Collects and compiles data to provide visibility of status for traveler's review and/or signature. Creates, edits and maintains electronic and written communication. Tracks and maintains information relative to department and business operations. Verbally communicates a wide variety of information to multiple audiences. Processes incoming and outgoing communication and correspondence to ensure proper dissemination of information. Prioritizes and schedules management-level employee time and availability for efficient use of time. Tracks and maintains designated conference room schedules for availability and efficient use of resources. Coordinates with the appropriate focal(s) to support the acquisition and maintenance of resources. Orders and maintains office supplies. Plans and implements logistics for executive level internal and external events. Provides guidance for less experienced employees. Works under limited supervision.

    EDUCATION:
    Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM
     
    Job Number: 176483
    Job Location: El Segundo, CA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 01/21/2019
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: LaVada Pulley
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: lpulley@chiptonross.com
    Website: www.chiptonross.com

    P-8A Non-Acoustic Sensor Operator

    Description:
    Chipton-Ross is seeking a P-8A Non-Acoustic Sensor Operator located in Patuxent River, MD

    RESPONSIBILITIES:
    Contract to Hire Project Instructions
    This is a contract to hire project

    Primary Location: US-US-MD-Lexington Park

    The P-8A Non-Acoustic Sensor Operator (EWO) will support airborne developmental testing of hardware and software for non-acoustic systems including radar, electro-optical, infrared imaging, electronic support measures, IFF, C4I networks, mission software and tactical common data-links. The selected candidate will perform aircrew duties as a member of the P-8A Integrated Test Team with Air Test and Evaluation Squadron Two Zero (VX-20) at NAS Patuxent River, MD. Candidate will be responsible for a variety of tasks that support P-8A flight testing, including participation in technical meetings, analysis of test requirements, test plan preparation, drafting detailed test procedures, conducting or supervising data collection in flight simulators, aircraft ground and flight environments, writing daily test reports, problem/deficiency reports and tracking. Flexible work hours may be required to support test activities. Most work will be conducted on-site at NAS Patuxent River, MD; however some travel will be required.

    Past or current designation as a Non-Acoustic Systems Operator (EWO) in P-3C/P-8A aircraft is required.
    Candidate selected must possess a minimum of 1000 hours in P-3C/P-8A or similar aircraft.

    Current or former qualification as a P-8A Non-Acoustic Systems Operator (EWO) Instructor is desired. Flight designations current within 12 months of start date of employment desired. The position will allow various combinations of education and experience using a 1 year of education for 1 year of experience substitution.

    Knowledge, Skills and Abilities: Applicant must possess extensive knowledge in the operation of airborne maritime environment Non-Acoustic Systems. Candidate must be able to pass the physical and training qualification requirements to provide contract aircrew support, including completion of Navy water survival and aviation physiology training, as well as annual FAA Class II flight physical. Candidate must be able to organize, demonstrate effective oral and written communications, and operate in a dynamic and fast-paced team environment. Candidate must be proficient with the Microsoft Office Suite (Word, Excel, and Power Point) and similar computer-based productivity applications. EOE/Minorities/Females/Vet/Disability Application Instructions For immediate confidential consideration, please apply online by clicking Apply Now to Join Our Team.

    EDUCATION:
    Accredited High School Diploma/GED and eight (8) years of related experience

    A Bachelor's Degree in computer science, mathematics, physical sciences, engineering, or equivalent work related experience in Developmental Test, Operational Test, Fleet Introduction Team or Weapons and Tactics Unit is desired. Two years of systems integration and test experience with P-3C/P-8A Non-Acoustic Systems is desired.

    WORK HOURS:
    Full-Time/First Shift

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 172151
    Job Location: Patuxent River, MD
    Rate: $DOE
    Duration: 4 MONTHS
    Input Date: 06/27/2018
    Last Updated: 05/21/2019
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PCB Design Drafter

    Description:
    Electrical Designer/CAD Drafter with emphasis on aerospace electronics circuits. Activities will include conceptual layout, detailed design, and engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high power PCB layout designs. Will interface with other engineering groups to insure design requirements are fulfilled.

    The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

    The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

    Responsibilities may include:
    * Interprets electrical design requirements and creates original board layouts, detailed drawings, schematics, and illustrations
    * Provides for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
    * Performs specialized electrical design computations and analysis
    * Prepare diagrams and PCB design schedule estimations.
    * Coordinates electrical design work with Electrical Design Engineers
    * Collects background information and helps write specifications and electrical design practices
    * New product development from concept through production
    * Processing documents through document change system

    Additional Job Details:
    Qualifications Required
    * IPC Certified Interconnect Designer (CID), as a minimum.
    * Minimum 5 years experience with Cadence v16.6 - v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
    * Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
    * Thorough knowledge of Cadence Library manager.
    * Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    * Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    * Experienced in implementing manufacturers data as well as PCB and CCA suppliers DFM recommended suggestions.
    * Full understanding of PCB, FAB and CCA manufacturing processes.
    * Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail. * Must be a US person.
    Preferred:
    * IPC Advanced Certified Interconnect Designer (CID+).
    * Experience with Siemens Teamcenter PLM Software
    . * Knowledge of GD&T ASME Y14.5.
    * A background working on avionics design related experience a plus
    . * Knowledge of and the use of Hierarchal schematic blocks a plus.
    * Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow a plus.
    * Experience with Microsoft Visio a plus.
     
    Job Number: 48658
    Job Location: Phoenix, Az
    Duration: 6 months
    Start Date: ASAP
    Input Date: 04/11/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com