Job Search Results

788 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 07:54PM Pacific Time by ContractJobHunter. )

Listings 1 - 788

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
**Secret Clearance** Mechanical Engineer(Thermal Analyst Engineer) in Palmdale, CA #0430AS

Description:
Recruiter to Contact:
Job Title: Mechanical Engineer -N
Job Number: 159157
Location: Palmdale, CA
Compensation: 75/hr W2
Assignment Length: 10 month contract
Security Clearance Secret (Prime Contract: Circle A, Can start w/o clearance: No, Interim Clearance Sufficient: No)
Non Exempt

Description:
Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

Skill/Experience/Education
Mandatory:
-Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc.
Desired:

Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems

-Experience creating presentation material using MS Power Point and delivering presentations.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory (Yes/No)

Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 6-8 Years Yes

ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 6-8 Years
 
Job Number: #0430AS
Job Location: Palmdale, CA
Rate: 75.00/hr W2
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers with Flight Controls Experience

Description:
Perform design of aircraft flight controls systems.
MUST HAVE flight controls experience from a General Aviation OEM:
Cirrus Aircraft
Textron (Cessna/Hawker)
Piper
AND the following would work too:
Gulfstream
Bombardier/Lear
Embraer

MUST BE US PERSONS
Create 3D/2D definition.
CATIA V5 is a MUST.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

MUST BE US PERSONS

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to $65/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers for open positions in Phoenix, AZ

Description:
STS AeroStaff Services is currently hiring Aircraft Maintenance Controllers for open positions in Phoenix, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Monitor maintenance performance of all scheduled aircraft operations
• Report essential information as to the status of operating aircraft
• Coordinate with Dispatch concerning all maintenance irregularities that affect the dispatching of aircraft
• Responsible for the proper administration of MEL/CDL/NAI procedures as established in the Company's General Procedures Manual
• Coordinate with FMU and line maintenance, contract maintenance or on-call maintenance as necessary to ensure mechanical irregularities are corrected in accordance with the procedures established in the Company's General Procedures Manual
• Ensure data in the pilot reports, ferry flights, MISs, SDR/MRs, delays and cancellations, etc., is recorded accurately on the Maintenance Control Logs (Form #MCI)
• Confirm all work performed on Company aircraft is accomplished by qualified, authorized and approved personnel
• Ensure on-the-job training is conducted and documented for Maintenance Controllers
• Perform additional tasks as specified in the CASS/Reliability section of the Company's General Procedures Manual
• Perform other duties as assigned by the Manager of Maintenance Control

Qualifications:

• Hold a Mechanic's Certificate with Airframe and Powerplant ratings OR Three years’ of experience maintaining Bombardier CRJ 700/900's and/or Embraer 170-190 series ERJ's preferred OR Three years’ of FAR Part 121 Maintenance Controller experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38282
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic

Description:
 Looking for a candidate that has more of a “mechanical” background. This truly is targeting an entry level candidate with a mechanical aptitude (i.e. recently finished, or in process of finishing, trade school. Perhaps high school graduate with mechanical interest).
 There should also be a general understanding of blueprints

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> Entry level position with little or no experience required. High school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 014_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer

Description:
Associate Engineer
Buffalo, NY
1 year contract


**This is a great opportunity for an ENTRY-LEVEL candidate!**

The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment. Our client's products generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Associate Engineer will operate as part of a design/development team, which includes other Department engineers. The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort. For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level.

To be considered for the position of Associate Engineer, a candidate should have a minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering. To fulfill the demands of design and development of new products the individual must show self starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques. A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable.


Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering.
 
Job Number: 51697
Job Location: Buffalo, NY
Rate: 25.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: 4/17/17
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineers - East Aurora, NY

Description:
STS AeroStaff Services is currently hiring Associate Engineers for open positions in East Aurora, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment
• The Associate Engineer will operate as part of a design/development team, which includes other Department engineers
• The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments
• In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal
• This phase is critical in that it establishes the basis for future design, and for contract negotiations
• Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort
• For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level

Qualifications:

• This could be a great opportunity for a recent graduate
• Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering
• Must show self-starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques
• A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38203
Job Location: East Aurora, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Mechanical Design Engineer III

Description:
Creo Mechanical Design Engineer III
Canoga Park, CA
1 Year Contract
$40.00-47.00/Hr

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:
Required:

-Proficient experience using CREO CAD System and Windchill PLM System.

-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

-Excellent experience in the creation of mechanical hardware.

-9+ Years of related Aerospace Industry experience.

Desired:

-A strong mechanical aptitude and experience with CAD software tools is desired.

-A proficiency with Microsoft Office products (Word, Excel and PowerPoint).

-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.

-An advanced engineering degree is a plus.
 
Job Number: 7329
Job Location: Canoga Park, CA
Rate: 40.00-47.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III

Description:
Component Product Engineer II/III

Location: Canoga Park, CA
Pay Rate: DOE ($42/hr - $48/hr)
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** This is not a designer role **

Duties:
-Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
-Candidates should have at least 3 years of related work experience.

Skills:
• 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
• 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
• 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
• 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
• 10%: Supplier integration with external vendors
• 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
• A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 7164
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III NOT a Designer role / local candidates only! CA

Description:
Job Title: Component Product Engineer II/III
Keywords:
Number of Positions: 3

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Additional Information: Manager has decided that she only wants to see local candidates at this time.

** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
Candidates should have at least 3 years of related work experience.
Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave

Start Date: 04/03/2017 Hours Per Week: 40.00
Est. End Date: 10/01/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-6804757
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Mechanical Design Engineer III CA

Description:
Job Title: Creo Mechanical Design Engineer III
Job Number: 159203/6819537
Location: Canoga Park, CA
Compensation: 47/hr
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
Skills: Required:
-Proficient experience using CREO CAD System and Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-A proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.

Keywords:
Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
# of Positions: 1
 
Job Number: MB-6819537
Job Location: Canoga Park, CA
Rate: 47/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo/NX Mechanical Design Engineer III

Description:
Creo/NX Mechanical Design Engineer III
Redmond, WA
1 Year Contract
$40.00-47.00/Hr

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.



10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.



20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.



10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:
Required:

-Proficient experience using NX or CREO CAD System.

-Proficient with Teamcenter or Windchill PLM System.

-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

-Excellent experience in the creation of mechanical hardware.

-9+ Years of related Aerospace Industry experience.



Desired:

-A strong mechanical aptitude and experience with CAD software tools is desired.

-Proficiency with Microsoft Office products (Word, Excel and PowerPoint).

-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.

-An advanced engineering degree is a plus.
 
Job Number: 7330
Job Location: Redmond, WA
Rate: 40.00-47.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo/NX Mechanical Design Engineer III WA

Description:
Job Title: Creo/NX Mechanical Design Engineer III
Job Number: 159202/7006490
Location: Redmond, WA
Compensation: 47/hr
Assignment Length: 12 month contract


Description:



Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
Skills: Required:
-Proficient experience using NX or CREO CAD System.
-Proficient with Teamcenter or Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-Proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.
Keywords:
Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
# of Positions: 1
 
Job Number: MB-7006490
Job Location: Redmond, WA
Rate: 47/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DESIGNER / DRAFTER / Solidworks test onsite / local only / Aerospace structures ASME CA

Description:
159187
TITLE: DESIGNER / DRAFTER
NORTHROP GRUMMAN/ASTRO AEROSPACE
Carpinteria, CA.
45/hr max

Seeking designers and drafters for contract openings at Astro Aerospace.

We have requirements for 2 to 4 new designers immediately and up to 7 within a few weeks. Currently we are interviewing two people but will have positions for two more. The focus of these designers should have more Drawing and Engineering Change Order experience than Design Engineering Experience.

Job Description:
Astro Aerospace, a Strategic Business Unit of Northrop Grumman Aerospace Systems, is currently in search of a Designer 4 to support our deployable space structure programs in Carpinteria, CA.

S(he) will design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. They will also develop basic data and make preliminary layouts, sketches, and notes necessary to present a design proposal. All will be done in conjunction with other organizations affected by design development.

Responsibilities
- Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
- Create layouts of complex assemblies and detail parts of devices, mechanisms, and structures.
- Check completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
- Identify design errors, omissions, and other deficiencies.
- Recommend revisions and/or improvements in design layout to the responsible engineers or designers.

Basic Qualifications:
- An Associate's or other two year technical degree in a related discipline, with six (6) years of related experience in mechanical or electro/drafting with aerospace structures and mechanisms.
- A minimum of three (3) years of experience using Solidworks and PDMWorks is required.
- Demonstrated knowledge of manufacturing practices and comprehensive working knowledge of ASME 14.5, ASME Y14.100.
 
Job Number: MB-001
Job Location: Carpinteria, CA
Rate: 45/hr max
Duration: 6-12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration

Description:
Aircraft System Integration

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity w/ ASME Y14.5 required
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in specific technical discipline or 10 yrs broad eng exp in several technical disciplines w/ Bachelors.
-Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7302
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Analysis Engineer

Description:
Seeking a Mechanical Engineer for an opening in Palmdale, CA.
**Requires active Secret Clearance**

RESPONSIBILITIES:
Thermodynamics analyst for Advanced Development Program. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform Environmental Control System (ECS) and Thermal Management System (TMS) analysis.

REQUIRED EXPERIENCE:
Experience designing and analyzing vehicle Thermal Management Systems.

ADDITIONAL EXPERIENCE: REQUIREMENTS:
Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems;-Experience creating presentation material using MS Power Point and delivering presentations.

FULL TIME/1ST SHIFT
9/80 WORK WEEK

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 162850
Job Location: Palmdale, CA
Duration: 7 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Location: Carlsbad, CA
Duration: 8-9 months

Description:
Experience:
- Minimum 3 years professional experience in mechanical design, analysis and drafting.
- Expertise in GD&T per ASME Y14.5-2009
- Experience in designing plastic parts and tools for plastic parts
- Experience performing FEA

Education:
Bachelor's Degree in Mechanical Engineering.

Responsibilities include:
- Product design and development, DFMEA, 3D CAD, Tolerance stack-up, GD&T, and BOM creation.
- Creation or updates of parts and tools including drawings, CAD models
- Creating or updating drawings for parts, sub-assemblies, products or test fixtures.
- Creating or updating bills of materials
- Creating or updating 3D CAD models
 
Job Number: 17-07100
Job Location: Carlsbad, CA
Per Diem: possible
Overtime: possible
Duration: 9 mos
Start Date: 5/1/17
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Seeking a Design Engineer for an opening in Rancho Cucamonga, CA.

RESPONSIBILITIES:
The Design Engineer will work closely with Design Engineering, Certification, Program Management, Quality Assurance, Manufacturing, and Supply Chain.

-Define and design the product under the responsibility of the Project Engineer/Engineering Manager/Program.
-Can get the functional lead of Design Engineer under the supervision of his/her Manager.
-Be responsible of establishment of the whole definition documentary.

Establish and develop the product definition justification using specific design tools for his/her own work and part of his/her perimeter (CAD, mechanical calculation tools, etc. ...). Some specific tools may be subject specialization of some Design Engineer (eg Tool routing specific cable, ...).
Communicate to the industrialization on time the necessary information to integrate in the ERP.
Keep Updated product definition justification.
Investigate the requests for product evolution overlooked known issues and process these requests (after approval by CCB) Investigate requests changes order for CCB and provide maximum of information. He/she is not within his/her responsibility to approve only the proposed changes.
Ensure the application of quality processes.
Realize all necessary controls to validate his/her work and ensure archiving results (T/Sup, calculations, Mom, etc ...).
Distribute the activity within the functional working group (technical contractor included).
Ensure overlooked his/her hierarchy the delay, technical and cost target.
Be able to propose a monitoring and technical summary.
Propose and generate ideas of design and architecture in offer phase or preliminary conception.
Establish or organize the part and product detailed design in compliance with the specifications and objectives defined.
Ensure the design interface with the rest of IPT and external stakeholders.
Initiate meetings necessary to validate the work. (3d, drawings reviews) Initiate test request. (validation) Track and organize any occasions definition linked to the first steps of the product (FAI monitoring, service return, ...) Maintain in condition and consistency the product definition documentary.
Follow technological developments and support preliminary studies if necessary (evolution products, anticipation of obsolescence and new regulations).
Contribute to update the development schedule Report any drift in objectives to Project Engineer and engineering Manager as well as Industrialization manager.
Participate in Product and or Process FMEA for sub-assemblies.
Contribute to the development of the Justification of product definition and guarantee the quality of its content in accordance with the Project Engineer.
Ask internal or external experts support for any activity outside his/her competence (R&T, internal and external suppliers ...) Apply procedures related to its field.
Participate in progress actions of his/her team, especially design methodology.
Participate in the training of new arrival.
Ensure the back-up (replacement) of a person in his/her department

REQUIRED EXPERIENCE:
Design skills
Tolerance stackup
GD&T
Proven problem solving skills
Proficient with MS Office
Able to multi-task
Proficient with Catia, Autocad
Proficient with DocsVision, Smarteam

Ability to read and review written communication.
Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
Must be able to speak publicly and give presentations.

PHYSICAL DEMANDS:
This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

EDUCATION:
High School Diploma

WORK HOURS:
Full Time
 
Job Number: 162813
Job Location: Rancho Cucamonga, CA
Rate: $85K
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Independence, Ohio) 8056, landing gears

Description:
Design Engineer ( Independence, Ohio) 8056
12 month contract

Pay Rate Range - $70+ DOE
12 month + assignment

**Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


Note: minimum of 10 years of experience in Landing Gear design

Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.

Basic Qualifications
• Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development
• Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies
• Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
• Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics
• Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
• Demonstrated ability to work directly with customers and suppliers
• Understanding of performance based specification requirements, requirements management and verification.
• In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
 
Job Number: 8056
Job Location: Independence, OH
Rate: 70
Per Diem: yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / Catia V5 PDM / Landing gear experience required / Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts OH

Description:
Job Title: Design Engineer
Job Number: 158840/8056
Location: Independence, OH
Compensation: 60-70/hr
Assignment Length: 12 month contract

Description:


Pay Rate Range - $70 DOE

12 month + assignment

**Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.


• Technical responsibility for all design related tasks of the project while working with the following:

o Project Head to ensure that design tasks are properly managed to achieve end item deliverables in accordance with project plans

o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements

o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust product is developed

• Executes design activities including:

o Customer / Suppliers:

Liaise with customer/Suppliers for all design related issues

Foster strong customer relationships through accountability, transparency and credibility

Assist with development and maturation of system procurement specification and statement of work

o Integration / Planning:

Responsible and accountable for all design tasks and its completion dates

Sets design priorities and objectives with a strong drive to meet expectations

Communicates progress and roadblocks with the Integrated Product Team (IPT) and the Project Head

o Design Tasks

Develops, reviews, recommends, coordinates design, design change activity with customer, other Company disciplines including production and manufacturing engineering

Generates design documentation such as trade studies, tolerance stack-ups, interface agreements, installation and proximity sensing analysis

Investigates design related issues and develops effective solutions

Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS-LS Engineering methodologies.

Generate design layouts, developmental and kinematic assemblies within Catia V5

Utilize UTAS New Product Introduction tools to facilitate execution for design related tasks as required

Present designs at internal and external design reviews to ensure the design meets requirements and expectations

Develop and achieve agreement on Landing Gear interfaces with customers and suppliers.
o Problem Resolution

Performs Engineering investigations into failures and participates in Root Cause and Corrective Action

Ensure timely and satisfactory resolution of problems

o Compliance

Ensures compliance to UTAS-LS engineering methodologies by providing direction/guidance to the design team.

Maintains compliance to ITAR and regulatory requirements

• Occasional travel between customer/suppliers and UTAS-LS locations.

• May be asked to complete other tasks based on skills and qualifications

Basic Qualifications

• Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development

• Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies

• Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system

• Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics

• Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers

• Demonstrated ability to work directly with customers and suppliers

• Understanding of performance based specification requirements, requirements management and verification.

• In-depth knowledge of MS programs (Word, Excel, Project, Power Point)

• Successful candidates must meet all requirements under ITAR & CCGP

• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust

• US citizen, permanent resident alien or able to review all export-controlled technical information.
 
Job Number: DW-8056
Job Location: Independence, OH
Rate: 60-70/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker ( Independence , Ohio) 8033, Catia, Smarteam

Description:
Design Engineer Checker ( Independence , Ohio) 8033
12 month Contract

Pay Rate - $45 - $55/hour.

Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
o Tolerance stack-up evaluation
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
 
Job Number: 8033
Job Location: Independence, OH
Rate: 50
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker / Catia V5 / Landing Systems Design OH

Description:
8033
Design Engineer Checker / Catia V5 / Landing Systems Design
Pay Rate - $45 - $55/hour.

Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
o Tolerance stack-up evaluation
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Compliance
o Ensures compliance to UTAS-LS Engineering methodologies
o Maintains compliance to ITAR and regulatory requirements
o Occasional travel between customer/suppliers and UTAS locations.
• Perform other duties as required

Basic Qualifications Search BS in Mechanical or Aerospace Engineering
• Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Working knowledge of materials and surface treatments.
• Strong communication skills
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
• Successful candidates must meet all requirements under ITAR & CCGP
• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
• US citizen, permanent resident alien or able to review all export-controlled technical information.

Preferred Qualifications:
• Demonstrated knowledge of ASME Y14.100 and Y14.41.
• Landing gear experience.
• Knowledge of Root Cause Corrective Action.
• Open minded, pro-active, independent, quick learner with a strong desire to learn.
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
Comments
 
Job Number: DW-8033
Job Location: Independence, OH
Rate: 45-55/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 1 & 2) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers
• Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design

Basic Qualifications:

• Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years
• Level 1: 0 Years’ with Bachelors in Science Mechanical Engineering
• Level 2: 2 Years’ with Bachelors in Science Mechanical Engineering; 0 Years’ with Masters Mechanical Engineering
• Position requires an active DoD Secret clearance

Preferred Qualifications:

• Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38295
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 2 & 3 - Mechanical) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers

Qualifications:

• Develop layouts and PDPs for non-complex mechanical Crew Systems products
• Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• Position requires an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38303
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer

Description:
Development Test Engineer - Electric Propulsion

Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
6 month contract position
Travel: Yes - Will require significant travel to El Segundo, CA and Ann Arbor, MI


** MUST be able to obtain a Secret Clearance. An Active Secret is preferred, but NOT required**


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
Experience/familiarity with the following preferred:
-Electric Propulsion
-Vacuum chamber systems and low pressure environments
-High voltage circuits and electronics
-Thruster testing or hollow cathode operation
-Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
-Plasma interaction with materials
-Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
-Understanding of magnetic fields and conductive/radiative heat transfer

Skills:
-Test experience
- Writing test plans
-Performing test setup
-Test analysis
-Basic understanding of facility requirements and test article installation
-Microsoft Office

Key Words:
- Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

Education:
- B.S. in Mechanical, Aerospace, Physics, or related field.
 
Job Number: 7264
Job Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion

Description:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** An active Secret Clearance is preferred, but NOT required. Only submit candidates with active Secret Clearances if you are able to employ them (have access the JPAS system) **



** Will require significant travel to El Segundo, CA and Ann Arbor, MI **





Experience/familiarity with the following preferred:



-Electric Propulsion

-Vacuum chamber systems and low pressure environments
-High voltage circuits and electronics

-Thruster testing or hollow cathode operation

-Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)

-Plasma interaction with materials

-Thruster performance characteristics (Thrust, Isp, efficiency, etc.)

-Understanding of magnetic fields and conductive/radiative heat transfer

Skills:
-Test experience

-Writing test plans

-Performing test setup

-Test analysis

-Basic understanding of facility requirements and test article installation

-Microsoft Office



Key Words:

Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

Education:
B.S. in Mechanical, Aerospace, Physics, or related field.
 
Job Number: 6914524
Job Location: Canoga Park, CA
Rate: 48
Duration: 6+ Months Possible Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: A.J. Schweiger
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion

Description:
Title: Development Test Engineer - Electric Propulsion
Location: Canoga Park, CA
Duration: 6+ months contract

Experience/familiarity with the following preferred:

Electric Propulsion
Vacuum chamber systems and low pressure environments
High voltage circuits and electronics
Thruster testing or hollow cathode operation
Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
Plasma interaction with materials
Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
Understanding of magnetic fields and conductive/radiative heat transfer
Skills:

Test experience
Writing test plans
Performing test setup
Test analysis
Basic understanding of facility requirements and test article installation
Microsoft Office
Education:

B.S. in Mechanical, Aerospace, Physics, or related field.
Key Words: Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
 
Job Number: SH366413
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: No
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion CA

Description:
Job Title: Development Test Engineer / Electric Propulsion
Job Number: 159106/6914524
Location: Canoga Park, CA
Compensation: 48/hr max
Assignment Length: 6 month contract

Description:


** An active Secret Clearance is preferred, but NOT required.

** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** An active Secret Clearance is preferred, but NOT required.

** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


Experience/familiarity with the following preferred:

-Electric Propulsion
-Vacuum chamber systems and low pressure environments -High voltage circuits and electronics -Thruster testing or hollow cathode operation -Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.) -Plasma interaction with materials -Thruster performance characteristics (Thrust, Isp, efficiency, etc.) -Understanding of magnetic fields and conductive/radiative heat transfer

Skills:

-Test experience
-Writing test plans
-Performing test setup
-Test analysis
-Basic understanding of facility requirements and test article installation -Microsoft Office

Key Words:

Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
Keywords:
Education: B.S. in Mechanical, Aerospace, Physics, or related field.
# of Positions: 4
 
Job Number: MB-6914524
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI / RF Test Engineer - RM

    Description:
    JSG is looking for a great EMI / RF Test Engineer for our client located in Hawthorne, California.

    1st shift, All candidates must be ITAR compliant.
    No corp to corp or H1B sponsorship.


    Overview:
    Our EMI/EMC team works to ensure our avionics hardware will perform when integrated into a complex and delicate system of both sensitive and high-power avionics that must operate through some of the harshest electromagnetic environments imaginable. The team performs exhaustive avionics analysis, design, and test at the board, unit, subsystem, and system levels with work that reaches out to almost all of the departments at the company. You will work closely with a significant number of teams within the company, most consisting of: the hardware design teams, production teams, structures teams, propulsion teams, launch, and mission management teams. They are one of the few teams that interface with almost all aspects of the company and get significant hands on time with flight hardware. They play a crucial role in the development of our systems particularly as we advance our efforts towards satellites and creating safe, reliable, inexpensive, and innovative systems that push the boundaries in size and mass.

    Responsibilities:
    • Write detailed test documentation including test procedures, test plans, and test reports
    • Work closely with avionics unit responsible engineers, test software engineers, and test technicians to successfully plan and execute testing
    • Perform detailed testing of avionics components of the launch vehicle and the spacecraft. Must have the specific skills to perform these tests and not just monitor them -- lightning, shielding effectiveness, and ESD testing are crucial
    • Design and verify new test methods and procedures with a keen eye on automation, efficiency, and test design trades
    • Perform resistance/capacitance/inductance analysis, structural grounding analysis, and circuit isolation analysis as they relate to requirements compliance
    • Troubleshoot EMI events from system to board level
    • Operate a variety of EMI, RF, and electronics test equipment
    • Ensure test equipment needed for testing is functional and calibrated
    • Program test automation software to control test equipment per documented test standards
    • Perform shielding effectiveness, transfer impedance, and resistance (micro-ohm to tera-ohm) measurements
    • Independently perform verifications and document results in a clear, precise, and complete manner
    • Support engineering management with confidence; think creatively -- question the status quo, while following documentation and maintaining prescribed quality standards.

    Basic qualification:
    • Bachelor of science degree in electrical engineering, physics or other similar technical areas of study
    • Minimum of 2 years of experience in a role focused on EMI/EMC testing
    • Experience performing grounding, bonding, and shielding effectiveness measurements with the following equipment: digital multimeter, milliohm meter, megaohm meter, signal generator, spectrum analyzer, oscilloscope
    • Experience with both conducted and radiated EMI/EMC analysis and testing
    • Experience with reading, interpreting and following: circuit schematics, PCB layouts, engineering drawings, BOMS, cable harnesses, wiring schematics, interface diagrams, layout drawings, mechanical drawings and CAD software

    Preferred skills and experience:
    • Advanced degree in Electrical Engineering, Physics or other similar technical areas of study
    • Demonstrated experience troubleshooting EMI events from system to board level
    • Knowledge of electromagnetic field coupling, ohm's law, Maxwell's equations, boundary conditions, image charge/current, and lumped element modeling
    • Demonstrated experience with Mil-Std-1541, Mil-Std-461, Mil-Std-464, Sae-Arp-5412, NASA-hdbk-4002, NASA-Std-4003, NASA-Std-4005, NASA-hdbk-4006, SSP 30237, SSP 30238, SSP 30240, and IEC 61000-4-2
     
    Job Number: 355977
    Job Location: Hawthorne, CA
    Rate: $40hr to $60hr
    Per Diem: yes
    Overtime: yes
    Duration: 6+ month
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Certification Engineers - Wichita, KS

    Description:
    STS AeroStaff Services is currently hiring Electrical Certification Engineers for open positions in Wichita, Kansas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
    • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
    • Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
    • Assist in development of functional test documents for avionics/electrical systems
    • Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
    • Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

    Qualifications:

    • Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
    • Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
    • Strong written and verbal communication skills and competency in one of the subject areas listed above
    • Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38215
    Job Location: Wichita, KS
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Electrical Design Engineer
    JOB SUMMARY:
    The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
    PRIMARY DUTIES & RESPONSIBILITIES:
    • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
    • Reviews project-related documentation to ensure its accuracy
    • Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
    • Defining the installation requirements of electrical systems and components
    • Creating wiring diagrams for interior monument cabin furnished equipment
    • Creating and designing interior cabin furnished monument Electrical drawings and 3D models
    • Performing electrical load analysis for interior monuments
    • Ensuring compliance of design to latest customer and airworthiness requirements
    • Checking of engineering data produced by peers
    • Participating in design reviews of electrical installations for interior monuments
    • The selection and application of materials and processes appropriate to each design element
    • Ensuring the successful integration of each design element with the product as a whole
    • Supporting Mechanical Design Engineers within the group with guidance on electrical issues
    • Supporting problem solving during manufacturing build process and through aftermarket queries
    • Customer support
    • Assisting in definition and supplier selection for components and equipment
    • Ensuring technical, commercial and weight targets are maintained
    • Communicating effectively and professionally with peers, suppliers and customers
    • Development and introduction of product improvements
    MINIMUM REQUIREMENTS:
    • Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
    PREFERRED QUALIFICATIONS:
    • Competent user of the incumbent CAD and data management systems – Team center and NX
    Aircraft interiors experience.
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer Mechatronics

    Description:
    Candidate Requirements:
    We're seeking someone with at least 2-3 years of engineering experience in electronics, electrical, or electronic component testing experience

    Must have test experience where you've collected and analyze data. Whether that is mechanical or electrical engineer doesn’t matter as long as they have the test experience. If you have no test experience, you must be an electrical engineer.


    Must have skills:
    1. Candidates should ideally have test experience AND mechanical or electrical engineering experience. (If they have no testing experience, they must have the electrical engineering experience)

    2. Bachelor's degree in electrical engineering

    3. Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here.

    What Makes This Role Interesting:
    You will have a unique opportunity to work in not only current products, but new product development also. These products are brand new that we’ll roll out for the next model year. You’ll get the opportunity to look into what the whole team does with working on a new product and current products.
     
    Job Number: 3081
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3485 NE JOHN OLSEN AVE
    City, State: HILLSBORO, OR 97124
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer – Testing

    Description:
    Job Title: Electrical Engineer – Testing
    Location: Portland, OR. 97217
    Duration: 14 months
    Job Description:
    • The role is to assist the lead engineer and developing test cases and testing of an electronic component.
    • Support client products that are out in the field and answering custom work orders and Shop Calls. This resource will be working on heating ventilation and air conditioning (HVAC).

    Responsibilities:
    • The team is responsible for interior and exterior lighting of all products (headlights, taillights, dome lights in the vehicle). Also responsible for all the switches on the dash and in the truck. They also work with their partners in cab to do the controls for heating ventilation and air conditioning to make sure everything is working correctly and functions as intended. Also making sure that any issues and problems get brought up with the supplier and get resolved.
    • All the client products are supported that are going through the plant right now. The first start of the day will be making sure the plants are happy, looking at custom work orders, shop calls coming in and making sure those are resolved.
    • Then, working with the lead engineer to make sure the current state of the testing is implementing these test cases with our product validation team and making sure the vehicles are using these units are functioning correctly.
    • Managing the test cases and the results and creating some sort of results tracking tool/spreadsheet.
    • The first few months they will be working mostly on getting up to speed to support the current product (80% learning the systems and helping the lead engineer to ensure all items are covered) .
    • Once they stabilize and are able to work independently be working and making sure that the product is as expected. They may also work on other side projects to help the lead engineer.

    Requirements:
    • Looking for 3 years of engineering experience in electronics, electrical, or electronic component testing experience
    • Need to have at least a BA degree with over 2 years of experience.
    • We really want someone who’s had test experience where they’re able to collect and analyze data. If no test: they need to be an electrical engineer.

    Hard Skills:
    • Candidates should ideally have test experience AND mechanical or electrical engineering experience.
    • Bachelor's degree in electrical engineering
    • Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here
     
    Job Number: 3075
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 14 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: OLSA RESOURCES INC
    Attention: Sarabjit Saxena
    Address: 3485 NE JOHN OLSEN AVE
    City, State: HILLSBORO, OR 97124
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Electrical Systems Engineer

    Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Long Term contract


    Unique Skills:
    1) AutoCad required Catia V5 preferred
    2) G650 and G500 electrical system design experience preferred.
    3) 14 CFR 25 Subpart H - EWIS experience preferred
    4) Part 25 Certification Experience for Cabin Interiors preferred
    5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6) Experience with power distribution, lighting, switching, sizing and routing.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.

    Job Description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7041
    Job Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro Mechanical Engineers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Electro Mechanical Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Summary:

    Applies electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Supports and participates in the design, test, modification, fabrication and assembly of prototype electromechanical systems.

    Job Duties & Qualifications:

    • Electro-Mechanical Engineer (Anti-Ice):
    o Primary responsibility includes cognizant engineering of an electronic controller, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
    o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
    o Hardware/software knowledge, knowledge of MIL-STD-1553 and power, military aircraft experience is required
    o Candidate must have experience with development of procurement specifications and supplier interface
    o Knowledge of anti-ice controllers is a benefit
    o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
    o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
    • Electro-Mechanical Engineer (Lighting):
    o Primary responsibility includes cognizant engineering of an aircraft lighting system, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
    o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
    o Hardware/software knowledge, knowledge of various aircraft bus architectures (RS-485, RS-232, MIL-STD-1553) and power, military aircraft experience is required
    o Candidate must have experience with development of procurement specifications and supplier interface
    o Knowledge of aircraft lighting systems/integration is a benefit
    o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
    o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
    • Electro-Mechanical Engineer (Cables):
    o Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems
    o Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
    o Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter
    o Create preliminary block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices
    o Facilitation of design reviews with key stakeholders to ensure designs meet requirements
    o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
    • Electro-Mechanical Engineer (Lines Routing):
    o Position requires extensive inter-departmental coordination with other vehicle system departments including structures, crew & equipment, ECS, maintenance and manufacturing operations teams
    o Requires knowledge of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
    o Proficiency in the design of support brackets and the ability to prepare detailed “Product Definition Packages” (PDPs) utilizing NX or similar 3D CAD software is required
    o Proficiency in 3d cable routing is a required
    o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
    • Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
    • Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
    • Must have an active DoD Secret clearance

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38300
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Drafter

    Description:
    Seeking associate’s degree plus 4 years’ experience in directly related drafting work. Accuracy and neatness must be well developed.

    ACCOUNTABILITIES:

    1. The Electronic Drafter has prime accountability to prepare complex detail drawings of electronic products and test equipment.

    2. Occasionally prepares layouts that are not complex.

    3. Prepares complex art work and printed circuit board drawings working from layouts.

    4. Modifies existing electronic drawings, art work and printed circuit drawings.

    This position includes preparation of electronic drawings from rough layouts and verbal instructions. The incumbent must have a developing knowledge of electronic circuits and components, as well as fabrication methods, and must have skills for creating printed circuit art work from layouts. He/She must be capable of drawing straightforward interconnects and assemblies having electronic and mechanical components and detailing all related drawings. He/She may occasionally be responsible for liaison follow-up of electronic jobs in production.
     
    Job Number: 51691
    Job Location: East Aurora, NY
    Rate: 33
    Duration: 6 Mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Cynthia Lashley
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Drafters - East Aurora, NY

    Description:
    STS AeroStaff Services is currently hiring Electronic Drafters for open positions in East Aurora, New York.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    Under the general direction of the Supervisor of Drafting and the technical direction of either an Electronic Packaging Designer, or an Electronic Packaging Drafter, the incumbent assumes responsibility for the detail design of new electronic products and for modification of design of existing electronic products and test equipment.

    Job Duties:

    • This position includes preparation of electronic drawings from rough layouts and verbal instructions
    • The incumbent must have a developing knowledge of electronic circuits and components, as well as fabrication methods, and must have skills for creating printed circuit art work from layouts
    • He/She must be capable of drawing straightforward interconnects and assemblies having electronic and mechanical components and detailing all related drawings
    • He/She may occasionally be responsible for liaison follow-up of electronic jobs in production
    • The Electronic Drafter performs his duties with limited supervision and is free to act and make decisions within the framework of existing standards and procedures including client policy and good drafting practices
    • His/Her duties will be approximately 75% routine and 25% creative; in which case, the incumbent finds it necessary to apply his knowledge and experience to new and different situations
    • The Electronic Drafter has prime accountability to prepare complex detail drawings of electronic products and test equipment
    • Occasionally prepares layouts that are not complex
    • Prepares complex art work and printed circuit board drawings working from layouts
    • Modifies existing electronic drawings, art work and printed circuit drawings

    Qualifications:

    • Associate’s degree plus 4 years’ experience in directly related drafting work
    • Accuracy and neatness must be well developed

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38196
    Job Location: East Aurora, NY
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Level 2 with active secret TX

    Description:
    Embedded S/W Engineer - Level 2
    Description
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
    Desired:

    Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    Razor (CM Control) 0-3 Years No
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Seeker Programming and/or Integration 4-5 Years No
    Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
    Embedded SW Engineering 4-5 Years Yes
     
    Job Number: DW-1366
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Level 2 with active secret TX

    Description:
    Embedded S/W Engineer - Level 2
    Description
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
    Desired:

    Driver Development, Python, ROS, CODESYS

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    COTS SBC 0-3 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    VxWorks 4-5 Years Yes
    Git 4-5 Years Yes
    J1939 or CANBus Experience 4-5 Years Yes
    Eclipse 4-5 Years Yes
    Ground Vehicles and Autonomy Experience 4-5 Years Yes
    Embedded SW Engineering 4-5 Years Yes
    Driver Development 0-3 Years No
    Python 0-3 Years No
    CODESYS 0-3 Years No
    ROS 0-3 Years No
     
    Job Number: DW-1367
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded SW Engineer(C/C++/Red Hat/ Embedded/ Cleared) in Grand Prairie, TX #1366AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159151
    Location: Grand Prairie, TX
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Must have Secret clearance in place prior to submittal of resume.
    Resume must have status of clearance stated.
    Exempt

    Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.

    Interfaces with customers, suppliers, application users, and other technical and support personnel.

    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering

    Desired:

    Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    Razor (CM Control) 0-3 Years No
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Seeker Programming and/or Integration 4-5 Years No
    Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
    Embedded SW Engineering 4-5 Years Yes
     
    Job Number: 1366AS
    Job Location: Grand Prairie, TX
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - 3/4/5 Cuda development VxWorks Linux Ubuntu CentOS Windows CA

    Description:
    17006478/1579
    Embedded Software Engineer - 3/4/5

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Mar 27, 2017

    Position: Embedded Software Engineer 3/4/5

    Location: Redondo Beach, CA

    Duration: 9 Months

    Rate: open

    Designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, aircraft flight control and display systems, pacemakers, defibrillators, mechanical and electrical systems. Interfaces with customers, suppliers, application users and other technical and support personnel.


    Basic Qualifications:

    Minimum 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

    Cuda development

    Embedded ARM processor developer
    Embedded Power PC processor developer
    Embedded Intel PC processor developer

    Strong OS Experience:

    Wind River VxWorks Versions 6 – 7
    Wind River Linux Versions 6 -7
    Yocoto Project Linux

    Development Environment: OS:

    Windows 7
    Ubuntu 14 – 16
    Red Hat Linux 7
    CentOS 7


    Preferred Qualifications:

    Knowledge of Software development process
    Knowledge in algorithms
    Hardware Knowledge
     
    Job Number: MB-17006478
    Job Location: Redondo Beach, CA
    Rate: open rate
    Duration: 9 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -Modern C/C++ (4-5 Years experience)
    -Agile Product Development (4-5 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -Boost Libraries (4-5 Years experience)
    -Web Services (SOAP/REST) (4-5 Years experience)
    -Jenkins (4-5 Years experience)
    -Continuous Integration (4-5 Years experience)
    -Qt Application Framework (0-3 Years experience)

    Desired:
    -Domain Knowledge of Air and Missile Defense (0-3 years experience)
     
    Job Number: 7298
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -US DOD Secret Clearance Required (4-5 years experience)
    -BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
    -C/C++ (4-5 years experience)
    -Linux (Red Hat) (4-5 years experience)
    -Embedded SW Engineering (4-5 years experience)

    Desired:
    -Razor (CM Control)
    -Domain Knowledge of Air and Missile Defense
    -Seeker Programming and/or Integration
    -Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
     
    Job Number: 7295
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -C/C++ (4-5 Years experience)
    -COTS SBC (0-3 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -VxWorks (4-5 Years experience)
    -Git (4-5 Years experience)
    -J1939 or CANBus experience (4-5 Years experience)
    -Eclipse (4-5 Years experience)
    -Embedded SW Engineering (4-5 Years experience)
    -Ground Vehicles and Autonomy Experience (4-5 Years experience)

    Desired:
    -Driver Development (0-3 Years experience)
    -Python (0-3 Years experience)
    -ROS (0-3 Years experience)
    -CODESYS (0-3 Years experience)
     
    Job Number: 7297
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer Level 2 with active secret TX

    Description:
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159149/1368
    Location: Grand Prairie, TX
    Compensation: 80/hr
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Exempt

    Description:


    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

    Must have active / transferable Secret Clearance prior to submittal and shown on resume.

    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

    Desired:

    Domain Knowledge of Air and Missile Defense


    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    Modern C/C++ 4-5 Years Yes
    Agile Product Development 4-5 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Boost Libraries 4-5 Years Yes
    Web Services (SOAP/REST) 4-5 Years Yes
    Jenkins 4-5 Years Yes
    Continuous Integration 4-5 Years Yes
    Qt Application Framework 0-3 Years Yes
     
    Job Number: DW-1368
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engine Lab Test Engineer

    Description:
    Required Skills/Certifications



    Bachelor’s Degree in Mechanical or Electrical Engineering from accredited college or university.

    5-10 years of experience in engine testing or program management.

    Specific Knowledge of Diesel Engine Mechanics

    Specific knowledge of Electrical control systems

    Specific knowledge of Microsoft Office applications (including excel and project)



    Desired Skills/Certifications



    Strong drive for meeting internal and external customer requirements.

    Motivated and self-starter.

    Experience in Engine Testing.

    Ability to work with engineering, global labs, and program management effectively.

    Ladder Logic and other programming language experience

    Has working knowledge of a diesel engine.

    Highly organized and close attention-to-detail.
     
    Job Number: 51692
    Job Location: Erie, PA
    Overtime: yes
    Duration: 1 year+
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer 4 (Shock/Structural)

    Description:
    The Engineer 4 candidate will investigate and prepare structure analyses, in particular Shock analyses NAVSEA 3010 procedures, to support ship alterations and equipment installations based on customer requirements. The Engineer will be responsible for developing and reviewing mechanical and structural drawings and providing calculations and analyses that support design requirements. He/she will work independently, explain system characteristics, and provide technical guidance to Junior Engineers and Designers. Travel up to 20% of the time to perform ship checks and surveys. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Plans, conducts, and evaluates projects or moderate phases of significant projects, coordinating efforts with engineers and staff. Conducts investigations and tests of advanced complexity. May direct teams in the performance of complex tasking. Performs engineering functions in one or more of the following specialties for marine applications: structural, civil, and or naval. Considered expert in field of specialty.

    Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. Lifting and moving of materials not to exceed the guidelines set for one man lift. Possible exposure to fumes and irritants normally encountered in an industrial or shipboard environment. May involve gathering of data while observing machinery or equipment operations
     
    Job Number: 001
    Job Location: Newport News, VA
    Rate: 44.33
    Per Diem: possible
    Overtime: possible
    Duration: 6 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TECHNICAL RESOURCES UNLIMITED INC
    Attention: Hunrington Ingalls Industries
    Address: 210 BROADWAY STE 106
    City, State: LYNNFIELD, MA 01940
    Phone: 781/595-8200
    800 Phone: 855/878-8200
    Fax Phone: 781/598-2240
    Website: www.truinc1.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III / Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines CA

    Description:
    Job Title: Engineer III
    Job Number: 159153/4155
    Location: Irvine, CA
    Compensation: 50-60/hr
    Assignment Length: contract


    Description:


    Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.)

    · Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
    · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
    · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
     
    Job Number: JK-4155
    Job Location: Irvine, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III( RTCA/DO-178B development and verification) in Irvine, CA #4155AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Engineer III
    Job Number: 4155
    Location: Irvine, CA
    Compensation: DOE
    Assignment Length: 6 month contract

    Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    Key Skills / Qualifications:
    · Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
    · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
    · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
    · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

    Key Requirements for the job:
    Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
     
    Job Number: #4155AS
    Job Location: Irvine, CA
    Rate: Open, DOE
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer Mechanical Design - 5 with active secret / NX FL

    Description:
    1582
    Engineer Mechanical - 5 (Job Number: 17007853)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne

    Shift: 1st Shift

    Target Start Date: Jun 5, 2017

    Subsystem Design Engineer -5 (multiple openings)

    Rate: $70/hr.

    Work Week: 9/80

    Duration: 1 year

    Active Secret clearance required to start


    The candidate must have a DoD Secret Clearance that has been established or renewed within the last 6 years. Final offers are contingent upon SAP award.

    Utilizing Siemens NX 10, the candidate will be responsible for designing detail parts, assemblies and installations associated with fixed-wing aircraft ECS, Fuel, Fire protection, Secondary Power, Electrical subsystems, mechanisms and Hydraulics subsystems.

    Responsible for the development and integration of various aircraft ECS components including ducts, manifolds, plenums.

    Responsible for the development and integration of aircraft fuel and hydraulic system components including valves, filters, reservoirs, mechanical lines, machined and sheetmetal detail parts.


    Basic Qualifications:

    14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education.


    Preferred Qualifications:

    Siemens NX or Teamcenter experience.
     
    Job Number: MB-17007853
    Job Location: Melbourne, FL
    Rate: 70/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates should have experience specifically with flight electronics packaging for space applications **
    ** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
    ** Candidates should be able to design from concept to a drawing released in Creo **

    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
    - Position will support various different Electric Propulsion programs

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: 6990
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV - Valves CREO CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 159295/7009394
    Location: Canoga Park, CA
    Compensation: 60/hr
    Assignment Length: 5 month contract

    Description:


    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.


    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:

    Candidates must have experience with Creo, Windchill and GD&T Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

    Engineers also required to analyze and verify product design and performance for adequacy and reliability.

    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.

    Must be able to prepare and make presentations at both internal and customer design reviews.

    Keywords:

    Education: BS degree in Engineering or equivalent. MS degree is desired.

    5 years of related experience as technical designer in rocket propulsion hardware and ProE/Creo CAD systems # of Positions: 2
     
    Job Number: MB-7009394
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 5 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158326/6312362
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:


    Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

    ** Candidates should be able to design from concept to a drawing released in Creo **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Perform engineering design tasks related to space electronics based products.
    Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

    Skills:
    Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    Familiarity with aerospace/defense engineering design and production processes and disciplines.
    Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Keywords:
    Education:
    Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: MB-6312362
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV – Valves

    Description:
    Engineering Designer IV – Valves

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    3+ month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

    Design and Development Engineer
    - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Candidates must have experience with Creo, Windchill and GD&T
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in Engineering or equivalent. MS degree is desired.
    - 5 years of related experience as technical designer in rocket propulsion hardware and ProE/Creo CAD systems.
     
    Job Number: 7320
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment Tool Designer

    Description:
    Summary: This position involves the design/modification of tooling and peculiar ground support equipment (GSE) required for VH-92 / S-92 aircraft maintenance, and the validation / 'fit check' of each designed/modified item. In addition to design work, this position will also involve support of the logistical requirements associated with all design work and contract requirements, as well as sustainment support throughout the duration of the contract.
    The following outline the normal scope of work associated with this position:
    - Coordinate with VH-92 GSE IPT Lead to support all GSE engineering related requirements.
    - Design support of new peculiar support equipment (PSE)
    - Support Engineering change proposals (ECPs)
    - Support all drawing updates requirements/revision control for existing GSE
    - Validate newly designed GSE
    - Evaluate COTS items from our suppliers as needed.
    Required Skills:
    - Must be able to work with CATIA V5. MatrixOne knowledge is desired. Cadra and Catia V4 knowledge is beneficial.
    - A practical knowledge of and experience with maintenance tools (e.g. aircraft and/or auto repairs)
    - A working knowledge of statics and dynamics (Mechanical Engineering)
    - A general understanding of material strengths and properties
    - Electrical/hydraulic design capabilities are beneficial.
     
    Job Number: 37912
    Job Location: Stratford, CT
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Description:
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Location: Orlando, FL
    Duration: 1 year contract
    Pay Rate: $65/hr - $75/hr (DOE)
    Shift: 1st, 9/80
    **Must have an Active Secret Clearance**


    Job Description:
    -Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
    -Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
    -Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
    -Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
    -Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
    -Requires good verbal and written communication skills, and ability to work in a team environment.
    -Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
    -Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


    Mandatory Skills:
    -Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


    Desired Skills:
    -Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    -PRO E and/or CATIA skills
     
    Job Number: 7019
    Job Location: Orlando, FL
    Rate: 65.00-75.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Controls Engineer - RM

    Description:
    Johnson Service Group is seeking a Flight Test Controls for a 15+ month contract in West Palm Beach, FL!

    The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

    Description:

    Plan, conduct, manage and report flight control systems and handling qualities flight tests.
    Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
    These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
    Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
    Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
    Utilize Mat lab to analyze flight test data and work with control laws.
    Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
    Experience:

    Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
    Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
    Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
    Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


    Additional Notes

    The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
     
    Job Number: 356488
    Job Location: West Palm Beach, FL
    Rate: $39hr
    Per Diem: yes
    Overtime: yes
    Duration: 15 months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

    We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

    Essential Functions:
    Coordinate test and certification requirements.
    Author flight test and ground test plans including test hazard analysis.
    Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
    Support instrumentation installation as required.
    Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
    Support flight and ground test conduct and data collection.
    Analyze test data and evaluate compliance with regulations.
    Prepare certification test reports.
    Domestic and occasional international travel is required.
    Desired Qualifications:

    5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
    Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
    Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
    Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education/Experience
    Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-156
    Job Location: Savannah, GA
    Rate: $56-$67/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
    -Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    -Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6952
    Job Location: Savannah, CA
    Rate: 56-67
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrument Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.

    Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

    This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

    Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

    Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.

    Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: 50660
    Job Location: Windsor Locks, CT
    Overtime: yes
    Duration: 1 year+
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrument Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.

    Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

    This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

    Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

    Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.

    Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: 50660
    Job Location: Windsor Locks, CT
    Overtime: yes
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Unique Skills:
    Extensive Flight Test mechanical design experience required. Extensive knowledge and experience in CATIA V5

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-172
    Job Location: Savannah, GA
    Rate: $56-$67
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Flight Test Mechanical Design Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Extensive Flight Test mechanical design experience required.
    -Extensive knowledge and experience in CATIA V5

    Education:
    -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.
    -5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities/Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 7304
    Job Location: Savannah, GA
    Rate: 56-67
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Helicopter Ground Test Engineer - RM

    Description:
    Johnson Service Group (JSG) is seeking a Ground Test Engineer for a 15+ month contract opportunity in Stratford, CT!

    No corp to corp or H1B sponsorship.

    Description:

    Ground Test (GT) Engineers are responsible for projects with significant scope and complexity covering the mechanical and structural aspects of Ground Testing helicopter components and systems.
    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
    Two large portions of out statement of work involves supplier qualification and fatigue substantiation which correlates laboratory fatigue test strength data with measured flight test loads and the customer's mission spectrum to produce dynamic component retirement times and/or inspection intervals that reduce the chance of catastrophic fatigue fracture to an extremely remote possibility.
    Tasks also include supporting and establishing operating limitations for both flight test programs and fielded aircraft.
    Skills Required:

    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
    Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
     
    Job Number: 356467
    Job Location: Stratford, CT
    Rate: $64hr
    Per Diem: yes
    Overtime: yes
    Duration: 15 months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulics Test Engineer CA

    Description:
    Job Title: Hydraulics Test Engineer
    Job Number: 159152/4000
    Location: Irvine, CA
    Compensation: 50-55/hr
    Assignment Length: contract


    Description:


    Must have Hydraulic test background and technical writing ability. Perform Qualification testing. developing test procedures, lead test technicians to conduct testing and prepare test reports.

    Analyzes, researches, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Designs products or systems of diverse/difficult scope and complexity using engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.). Develops and recommends solutions to a variety of complex engineering requirements to ensure that design objectives are met. Projects at this level are assigned to develop in-depth knowledge and skills and to build knowledge of the organization, processes, and customers.

    · Bachelors degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline. Masters degree (MS preferred. Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience.
    · Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise.
    · Demonstrated ability to investigate and implement new technologies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.
     
    Job Number: JK-4000
    Job Location: Irvine, CA
    Rate: 50-55/hr
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulics Test Engineer in Irvine, CA #4000AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Sr. Engineer
    Job Number: 4000
    Location: Irvine, CA
    Compensation: DOE
    Assignment Length: 6 month contract

    Description:
    Analyzes, researches, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Designs products or systems of diverse/difficult scope and complexity using engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.). Develops and recommends solutions to a variety of complex engineering requirements to ensure that design objectives are met. Projects at this level are assigned to develop in-depth knowledge and skills and to build knowledge of the organization, processes, and customers.

    Key Skills / Qualifications:

    · Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline. Master’s degree (MS preferred. Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience.
    · Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise.
    · Demonstrated ability to investigate and implement new technologies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

    Key responsibilities:
    Must have Hydraulic test background and technical writing ability. Perform Qualification testing. developing test procedures, lead test technicians to conduct testing and prepare test reports.
     
    Job Number: #4000AS
    Job Location: irvine, CA
    Rate: Open, DOE
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    **Long term temp assignment**
    ** This position specifically requires US Citizenship**

    Job Description
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

    Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required.
    Knowledge of LabVIEW desired.
    Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required.
    Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: CT36298
    Job Location: Windsor Locks, CT
    Rate: 65.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Loads Engineer CA

    Description:
    Job Title: Loads Engineer
    Job Number: 158772/8755
    Location: San Diego, CA
    Compensation: DOE
    Assignment Length: contract

    Description:

    Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

    We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

    We have an exciting opportunity for a Loads Engineer in our Mechanical Engineering Department. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems.

    DUTIES AND RESPONSIBILITIES:

    •Responsible for performing loads analysis of aircraft components, assemblies, and systems.
    •Loads analysis includes calculation of aerodynamic and inertial flight loads, landing, ground operations, and ground support equipment loads.
    •Calculate loads by way of classical and computer methods, and develop new methodologies for load development.
    •Generate documentation to support design and airworthiness certification.
    •A working knowledge of JSSG, Mil-Spec, and FAA airworthiness requirements is advantageous.
    •Experience with aeroelastic loads development, closed-loop flight control systems, in-flight testing, and explicit time domain analysis for loads development is desirable.
    •Must be familiar with loads development, statics, dynamics, aerodynamics, stability and control, and vibrations.
    •Must be familiar with gusts, landing simulations, and flutter.


    *Job Qualifications

    •Typically requires a bachelor's degree, master's degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; Twelve or more years of experience with a bachelor's degree or two or more years of experience with a master's degree.
    •Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
    •Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
    •Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.
    •Must have the ability to perform FEA on composite airframes/structures.
    •Desirable: Working knowledge of panel codes, NASTRAN, or ABAQUS software is preferred.
    •Experience in the aerospace or related industry and with loads analysis and loads development experience.
    •Desirable: Knowledge of aeroelastic systems, closed-loop flight control systems, flutter, and in-flight testing.
    •Experience with Matlab, Excel, Visual Basic, panel codes, NASTRAN, ABAQUS, or other loads development software.
    •Able to work extended hours as required.


    Qualifications

    Essential Qualifications

    • Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD.

    • May substitute equivalent engineering experience in lieu of education.

    • Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

    • Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.

    • Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.

    • Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems.

    • Must be able to work both independently and in a team environment. Able to work extended hours as required.

    • A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.


    City San Diego
    State California
    Travel Percentage Required None
    Clearance Required? No
    Temp Assignment Duration (# of Days) 365
     
    Job Number: DW-8755
    Job Location: San Diego, CA
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience
     
    Job Location: Savannah, GA
    Rate: Negotiable
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 2

    Description:
    Manufacturing Engineer - Level 2

    Location: Orlando, FL
    Rate: $23.00 - $27.00/HR
    1 year contract position
    1st Shift


    Description
    - Provides manufacturing engineering support for a variety of TLS programs.
    - Provides technical guidance in addition to timely problem resolution to manufacturing operators.
    - Creates assembly planning based on drawings and solid models, participates in engineering reviews, identifies opportunities for process improvement, and interfaces with Tech Ops/Design Engineering organization to implement DFA concepts.
    - Develops build aides to improve workflow and reduce injuries.
    - Applies lean manufacturing techniques to reduce cost and increase yields.
    - Investigates root cause of failures/defects and implements corrective actions to support continuous improvement.
    - Must have good communication skills and be able to work effectively in a team environment.
    - May be required to develop cost estimates in support of proposals.


    Skill/Experience/Education
    Mandatory:
    - Bachelors degree in Industrial Engineering or other related field.
    - Ability to read and interpret engineering drawings and parts lists and create manufacturing work instructions to meet all requirements.
    - Experience with electro-mechanical assemblies and able to interpret schematics and wiring diagrams.
    - Previous experience with cable, electro-mechanical assemblies and/or cabinet assembly.
    - Experience in resolving engineering, planning, tooling and assembly problems.
    - Ability to work closely with design engineering, assembly operators, test, quality assurance and other operations support teams.
    - Demonstrated capability to multitask in support of multiple concurrent programs and initiatives.
    - Excellent communication skills both written and verbal.
    - Microsoft Office suite experience with MS Outlook, Word, PowerPoint, and Excel.

    Desired:
    - Understanding of lean and six sigma principles
    - Greenbelt certified
    - Familiarity with SAP (Qnotes, Routings, Bills of material)
    - Experience with Creo, or equivalent software
     
    Job Number: 7273
    Job Location: Orlando, FL
    Rate: $23.00 - $27.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 2 / no clearance FL

    Description:
    1341
    Manufacturing Engineer - Level 2
    Clearwater, FL
    30-35/hr max
    3 months +
    No Clearance

    Description
    Provide manufacturing engineering support to the build of electromechanical cable assemblies as a contributing member of an integrated product team (IPT). Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required. Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer. Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents. Support the design change management activities of the IPT. Analyze process defect data and trends and help define and implement corrective actions. Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability. Interface with technical counterparts in other organizations both within and outside Clearwater Operations.
    Skill/Experience/Education
    Mandatory:

    Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies within an Integrated Product Team type of work environment. Skill with surface mount technology and automated smt build equipment. Strong interpersonal skills and demonstrated ability to work with co-workers and others from diverse backgrounds. Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel. Mechanical and electrical aptitude, and the ability to quickly learn new software applications. Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point. Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis. Willingness to work overtime and during off-days occasionally as required to support production operations.
    Desired:

    Bachelors degree from an accredited University in Engineering. Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems. Strong technical understanding of cable assembly producibility and process flow. Specific experience with SAP and Solumina manufacturing execution system.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Cable Build Processes Build Process Work Instruction Authoring 4-5 Years Yes
     
    Job Number: DW-1341
    Job Location: Clearwater, FL
    Rate: 30-35/hr max
    Duration: 3 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mech Tech 2A (Inside Machinist)

    Description:
    Must be familiar with overhaul procedures and methods for Navy and commercial power plant equipment. Must be able to read drawings and technical manuals and work to shop instructions to complete assigned tasks that meet quality standards. Must be knowledgeable in using measuring instruments and hand tools required for the trade skill assignment. Must have a working knowledge of various shop equipment (e.g. welders, lathe, boring mill, milling machine, etc) as required for the trade skill assignment. Work is in both shop and field environments and may be in a nuclear power plant. Basic Qualifications: High School and 2 years additional education and/or experience

    Preferred Qualifications: Candidate for Mechanical Technician II position should have a thorough exposure to the CNC and conventional machining processes, with the ability to function with minor Supervisory oversight. Excellent communication and interpersonal skills are essential
     
    Job Number: 003
    Job Location: Newport News, VA
    Rate: 17.54-23.08
    Overtime: yes
    Duration: 6 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TECHNICAL RESOURCES UNLIMITED INC
    Attention: Steve Dennis
    Address: 210 BROADWAY STE 106
    City, State: LYNNFIELD, MA 01940
    Phone: 781/595-8200
    800 Phone: 855/878-8200
    Fax Phone: 781/598-2240
    Website: www.truinc1.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mech Tech 2A (Machine Operator)

    Description:
    Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

    Analyze engineering and planning documentation and Operations build strategies in the design of CNC machining programs. Implement developed programs at lathe and milling centers supporting cost effective contract performance, sequence of operations and work flow to improve efficiencies in plant and production facilities. Will assist in implementing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Responsible for performance based on four cornerstones in order of priority; Safety, Quality, Cost and Schedule.

    Basic Qualifications: High School and 2 years additional education and/or experience.

    Preferred Qualifications: Candidates for Mechanical Technician II position should have a thorough exposure to conventional milling processes, minor CNC machining experience with the ability to function with minor Supervisory oversight. Excellent communication and interpersonal skills are essential.
     
    Job Number: 005
    Job Location: Newport News, VA
    Rate: 17.54-23.08
    Overtime: yes
    Duration: 12 months +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TECHNICAL RESOURCES UNLIMITED INC
    Attention: Steve Dennis
    Address: 210 BROADWAY STE 106
    City, State: LYNNFIELD, MA 01940
    Phone: 781/595-8200
    800 Phone: 855/878-8200
    Fax Phone: 781/598-2240
    Website: www.truinc1.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mech Tech 3A (Inside Machinist)

    Description:
    Must be familiar with overhaul procedures and methods for Navy and commercial power plant equipment. Must be able to read drawings and technical manuals and work to shop instructions to complete assigned tasks that meet quality standards. Must be knowledgeable in using measuring instruments and hand tools required for the trade skill assignment. Must have a working knowledge of various shop equipment (e.g. welders, lathe, boring mill, milling machine, etc) as required for the trade skill assignment. Work is in both shop and field environments and may be in a nuclear power plant.

    Basic Qualifications: High School and 5 years relevant experience or Associate's Degree and 3 years relevant experience.

    Preferred Qualifications: Candidate for Mechanical Technician III position should have a thorough exposure to the CNC and conventional machining processes, with the ability to function with minor Supervisory oversight. Excellent communication and interpersonal skills are essential.
     
    Job Number: 004
    Job Location: Newport News, VA
    Rate: 20.83-27.40
    Overtime: yes
    Duration: 12 months +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TECHNICAL RESOURCES UNLIMITED INC
    Attention: Steve Dennis
    Address: 210 BROADWAY STE 106
    City, State: LYNNFIELD, MA 01940
    Phone: 781/595-8200
    800 Phone: 855/878-8200
    Fax Phone: 781/598-2240
    Website: www.truinc1.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Must Have Active Secret Clearance

    Proficiency with PRO E/CATIA and Intralink
     
    Job Location: FL
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Must Have Active Secret Clearance

    Experience with Catia V5 3D parametric modeling and drafting • Perform detailed drawing checks and be responsible for completion of production ready drawings • Ability to work under little or no direct supervision • Demonstrated previous success working in a team based environment to meet objectives .


    Any familiarity with structure of C130 aircraft, specifically C130J • Air Force customer experience • Experience or familiarity with engineering change documentation • Experience with Teamcenter PLM software • Active DoD secret clearance
     
    Job Number: 39807
    Job Location: KY
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Our client in Canton MA is looking for a BSME or SR. Mechanical designer who has a strong Pro/E background as well as experience designing Switches, Sensors and/or Actuators.
     
    Job Location: Canton, MA
    Rate: $40-$50/HR
    Per Diem: Yes, Split
    Overtime: No
    Duration: 6-12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AMERICAN CONTRACT GROUP
    Attention: Derek Doucette
    Address: 50 HIGH ST STE 46
    City, State: NORTH ANDOVER, MA 01845
    Phone: 978/984-5581
    800 Phone: 877/723-9087
    Fax Phone: 978/208-8246
    Website: www.americancontractgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    1 year contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description:
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Verify tolerance analysis on system components has been performed.
    - Work with Designer’s to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
    - Work closely with Mechanical Engineering to support all program objectives.

    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout, documentation and checking IAW ASME Y14.24 and familiar with MIL-T-3100 and MIL-STD-100.
    - Five (5) to ten (10) year’s experience of creating Pro-E/CATIA drawings and drawing release.
    - Proficiency with Pro-E/Windchill and Intralink is required.
    - Knowledge of LMC drawing release procedures is desired.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Previous LMC experience is a plus.
     
    Job Number: 7009
    Job Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Duration: 6 month contract
    Shift: 1st Shift

    **Must have a current ACTIVE secret clearance or have had one within the last 2 years**

    Job Description:
    CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY.
    - This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications.
    - This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

    Skill/Experience/Education
    Mandatory:
    • Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
    • Experience with Catia V5 3D parametric modeling and drafting. Structural component and assembly design.
    • Perform detailed drawing checks and be responsible for completion of production ready drawings
    • Ability to work under little or no direct supervision
    • Demonstrated previous success working in a team based environment to meet objectives
    • Active DoD secret clearance

    Desired:
    • Any familiarity with structure of C130 aircraft, specifically C130J
    • Air Force customer experience
    • Experience or familiarity with engineering change documentation
    • Experience with Teamcenter PLM software
     
    Job Number: 6962
    Job Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Orlando, FL
    Rate: $55.00/HR
    1 year contract

    **Must have a current ACTIVE secret clearance**

    Description
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Perform weights and tolerance analysis on system components.
    - Work concepts and detail designs to fit Platform Requirements.
    - Designer will work the design layout, and follow-up working with mechanical analyst to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the designer will work with the supplier during the design and manufacturing process to mitigate and production issues.
    - Work closely with Mechanical Engineering to support all program objectives.


    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout and design documentation.
    - 5 to 10 experience of creating PRO E/CATIA drawings and drawing release.
    - Proficiency with PRO E/CATIA and Intralink is required.
    - Knowledge of LMC drawing release procedures is desire.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Ability to obtain a security clearance is mandatory.
    - Previous LMC experience is a plus.
     
    Job Number: 7018
    Job Location: Orlando, FL
    Rate: $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3 / Pro/e Catia V5 / active secret clearance FL

    Description:
    1288
    Mechanical Design Engineer - Level 3
    Orlando FL
    60-65/hr
    Ability to obtain a security clearance is mandatory. Previous LMC experience is a plus.

    Description
    Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Perform weights and tolerance analysis on system components. Work concepts and detail designs to fit Platform Requirements. Designer will work the design layout, and follow-up working with mechanical analyst to ensure the design meets all requirements including Safety of Flight (SOF). Additionally, the designer will work with the supplier during the design and manufacturing process to mitigate and production issues. Work closely with Mechanical Engineering to support all program objectives.
    Skill/Experience/Education
    Mandatory:

    BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout and design documentation. 5 to 10 experience of creating PRO E/CATIA drawings and drawing release. Proficiency with PRO E/CATIA and Intralink is require. Knowledge of LMC drawing release procedures is desire. Good knowledge of all aspects of Mechanical engineering is essential. Ability to obtain a security clearance is mandatory. Previous LMC experience is a plus.
    Desired:

    BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout and design documentation. 5 to 10 experience of creating PRO E/CATIA drawings and drawing release. Proficiency with PRO E/CATIA and Intralink is require. Knowledge of LMC drawing release procedures is desire. Good knowledge of all aspects of Mechanical engineering is essential. Active secret required. Previous LMC experience is a plus.
     
    Job Number: DW-1288
    Job Location: Orlando, FL
    Rate: 60-65/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer II

    Description:
    Mechanical Design Engineer II
    Long Beach, CA
    Long Term Contract
    $33.29-43.28

    Unique Skills:
    Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams. Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems. Attention to visual appearance/aesthetics of completed designs is very important. Excellent communication skills and ability to work with operations technicians on the shop floor is required. Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus. • Bachelors or higher degree in Mechanical or Aerospace Engineering at an accredited 4 year University preferred. • Minimum of 18 months related engineering experience with a Bachelor's degree. • Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. • Experience with Catia V5 and AutoCAD preferred. • Strong written and verbal communication skills required.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
    Languages Required (in addition to English): None
     
    Job Number: 7277
    Job Location: Long Beach, CA
    Rate: 33.29-43.28
    Per Diem: Possible Split
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer - ProE CREO

    Description:
    Title: Mechanical Designer - CREO
    Location: Jupiter, FL
    Duration: 4+ month contract

    Duties:

    Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design. This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts. Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
    Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements. Applicant must have prior turbomachinery design or development experience.
    Key Words/Requirements:
    • Proficient experience using CREO 2.0 CAD System
    • Experienced user of Windchill PLM System
    • Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    • Excellent experience in the creation of mechanical engineering drawings
    • 9+ Years of related Aerospace Industry experience
    • Turbomachinery experience
    Skills: Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and profecient use of Windchill PLM System. Advanced surfacing and modeling skills preferred. Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M. Ability to create mechanical engineering drawings, and related specifications. Ability to write clearly and concisely. Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements. Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
    Key Words/Requirements:
    • Proficient experience using CREO 2.0 CAD System
    • Experienced user of Windchill PLM System
    • Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    • Excellent experience in the creation of mechanical engineering drawings
    • 9+ Years of related Aerospace Industry experience
    • Turbomachinery experience
    Education Bachelor’s or Master’s degree in an appropriate engineering discipline. 9+ years of rocket propulsion design experience preferred.
    Languages: English Read Write Speak
     
    Job Number: RB367334
    Job Location: Jupiter, FL
    Rate: 60
    Duration: 4 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Rashmi Bhalla
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer - Solidworks

    Description:
    Title: Mechanical Designer
    Location: Anaheim, CA (LOCAL CANDIDATES ONLY)
    Duration: 6 month contract


    Basic Qualifications

    Must be very good in AutoCAD and Solidworks 2015!!!!!!!
    Solidworks CSWP or CSWE is preferred
    Required:

    High school graduate and two (2) years college - mechanical/electrical engineering courses
    8-10 years design experience on or around machine design, vehicle design, power train, industrial equipment automation, pneumatics, & hydraulics
    Proficient in parametric solid modeling & CAD software packages; minimum of 5-10 years experience
    Proficiency in AutoCAD & SolidWorks; minimum of three years experience
    Proficient in developing correct form, fit & function of designs
    Proficient in design & detail of components & assemble &make supporting analysis
    Familiarity with maintenance requirements & procedures for common mechanical components
    Familiarity with weldment drawings & callouts
    Proficient in materials selection & application
    Proficient in fastener selection & design
    Proficient in using measuring devices such as scales, calipers, & micrometers
    Proficient in configuration & document management
    Proven knowledge of ASME Y14
    Proven minimum two (2) years experience working with Microsoft applications (Word, Excel, PowerPoint, Outlook)
    Desired Qualifications:

    Accuracy, focus, productivity, good communication skills
    Ability to work with tight schedules *Familiarity with SmarTeam software
    Proficient in geometric dimensioning & tolerancing
    Knowledge of AWS welding standards & requirements
    Required Education

    High school graduate and two (2) years college
    Preferred Education

    Bachelors Degree (or Masters Degree)
     
    Job Number: JG366614
    Job Location: Anaheim, CA
    Per Diem: No
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Jason Greer
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    MUST BE A US CITIZEN

    Ability to develop design packages using CADD, detailed program plans, estimates, and proposals.
    •Energetics materials experience
    •Chemical manufacturing experience
    •P&ID Development
    •3D design / modeling using SolidWorks, Inventor, etc.
    •Tank and Vessel Design / Construction
    •Pumps / Piping Design
    •Finite Element Analysis and Computational Fluid Dynamics
     
    Job Location: TN
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Attention: Joe
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    US Citizen

    Working knowledge of Pro-E Wildfire and Creo computer aided design and engineering tool

    Researches, plans, analyzes, designs, and develops mechanical products and systems such as instruments, structures, engines, mechanisms, and other devices. Analyzes mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of energy. Uses advanced modeling and analysis tools to develop product specifications, models, technical data packages, and integration and verification procedures. Conducts and supports subsystem and system integration and verification activities, and manufacturing planning.
     
    Job Location: MN
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Mechanical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Ideal Candidates will have mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -Seats
    -Galley
    -Lavs
    -LRU installations
    -Liners
    -Water System
    -Waste System


    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7160
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Level 2

    Description:
    Mechanical Engineer - Level 2

    Location: Orlando, FL
    Pay Rate: DOE ($32/hr - $50/hr)
    Duration: 3+ month contract
    Shift: First, 9/80
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    -Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
    -Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
    -Applicant will be responsible to assist the UK Chinook program with specific electro mechanical integration/design tasks related to subcontract component and Company design integration.
    -This will include reviewing subcontractor design/drawings as it relates to the overall system design intent and effect changes to ensure proper integration between subcomponents and the system as a whole.
    -Included in this will be CREO specific design work, CREO specific 2D drawing updates, and Windchill EPDM specific configuration updates (to include PL changes).

    Skill/Experience/Education (Mandatory):
    -4 yr and up Technical College Degree with 2 years of professional experience.
    -Mechanical and Electromechanical Design Familiarity with Creo Pro/E.

    Desired:
    -Mechanical and Electromechanical design skills.
    -Familiarity with Creo Pro/E, Windchill EPDM and finite element analysis tools.
    -Hardware integration experience.
    -EPDM training.
     
    Job Number: 7135
    Job Location: Orlando, FL
    Rate: 32-50
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Level 3

    Description:
    Mechanical Engineer - Level 3

    Location: Orlando, FL
    Rate: $60.00/HR
    1 year contract

    **Must have a current ACTIVE secret clearance**

    Description
    - Researches, plans, designs and develops mechanical products and systems such as instruments, controls, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
    - Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
    - Utilizes Pro-E / CREO for gimbal and optical-mechanical mechanism detailed design.
    - Bearing, encoder, motor selection and supplier oversight required.
    - Assist with production issues resolution and root cause analysis.


    Skill/Experience/Education
    Mandatory:
    Mechanical engineer with 6+ years optical/gimbal mechanism design experience.
     
    Job Number: 6998
    Job Location: Orlando, FL
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Level 3 with active secret / CREO / gimbal and optical-mechanical mechanism detailed design FL

    Description:
    1277
    Mechanical Engineer - Level 3
    Orlando, FL
    60/hr max
    Active Secret required

    Description
    Researches, plans, designs and develops mechanical products and systems such as instruments, controls, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. Utilizes Pro-E / CREO for gimbal and optical-mechanical mechanism detailed design. Bearing, encoder, motor selection and supplier oversight required. Assist with production issues resolution and root cause analysis.
    Skill/Experience/Education
    Mandatory:

    Mechanical engineer with optical/gimbal mechanism design experience.
     
    Job Number: DW-1277
    Job Location: Orlando, FL
    Rate: 60/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Valves

    Description:
    Canoga Park, CA
    5-6 + month contract

    Duties:

    Candidates must have experience with Creo and GD&T. Windchill is strongly desired
    Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.
    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
    Activities:

    Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts.
    Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:

    Candidates must have experience with Creo, Windchill and GD&T
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.
    5 years of related experience as technical designer in rocket propulsion hardware and ProE/Creo CAD systems
    Education:

    BS degree in Engineering or equivalent.
    MS degree is desired.
     
    Job Number: JO367651
    Job Location: Canoga Park, CA
    Duration: 5-6 month contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Jonathan Oleson
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Piping Designer

    Description:
    MUST BE A US CITIZEN

    5+ years piping design experience with 3+ years in 3D piping design using AutoCAD Plant 3D, Intergraph, Caesar II (MicroStation, PDS, SmartPlant 3D), SolidWorks, etc.

    Piping design for chemical / petrochemical plant
     
    Job Location: TN
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Attention: Dante
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems (Flight Test)

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They are a rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and support staff.

    We are seeking full-time Aerospace Engineers with Mechanical Systems experience to join our Flight Test Team at our office in Seattle. If you have 4+ years of experience in Mechanical Systems, we would like to speak with you.

    • Aerospace engineering experience in Mechanical Systems, including experience in at least one of the following: Mechanical Systems, Flight Control Systems, Landing Gear Controls, Hydraulic System and/or Brake Control Systems utilized in aircraft
    • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
    • 4+ years of aerospace experience.
    • Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
    • Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
    • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
    • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
     
    Job Location: King
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Design & Analysis Engineer

    Description:
    **Ability to obtain a secret clearance shortly after hire is required.**

    Areas of Expertise Mechanical and Electrical Systems Yes Intermediate
    Technical Skills Systems Analysis & Design Skills Yes Intermediate
    Technical Skills Unigraphics Yes Intermediate

    Engineer/Scientist 3 assigned to the Support Systems Mechanical Ground Support Equipment Sub Systems Team. The Mechanical Sub Systems Support Equipment (SE) Team is the team within the Support Equipment and Services organization that is responsible and accountable for defining, proposing, developing, delivering, and supporting high quality, affordable SE required at the Organizational and Intermediate maintenance levels to meet our various customer's needs and requirements. This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft. Candidates will be required to apply their knowledge of engineering principles, aircraft systems, aircrew operations, maintenance procedures, and manufacturing operations to define, support and improve system operability with emphasis on affordability. Successful candidates will be expected to learn quickly and become capable of independent function within the team in short order. Candidates will need to have strong Systems Engineering and Project Management skills. This position is a mix of technical project management and managing/overseeing delivery of Support Equipment end items. Candidates will be expected to have strong oral and written communication skills that will enable them to effectively interact with internal and external customers and suppliers as well as team members from multiple disciplines.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Ability to define, specify, & evaluate mechanical ground support equipment requirements & architectures for adherence to company, customer, quality & regulatory requirements. Ability to create and manage schedules, as well as coordinate installation and delivery of equipment. Ability to translate functional requirements into designs/specifications and ultimately into fielded systems. Proficiency in oral and written communication is required. Must be highly motivated, self-starting and comfortable dealing with diverse people and disciplines. Previous experience in a multi-disciplined team environment, and frequent interaction with suppliers and customers is desired. Experience with mechanical ground support equipment and logistics (technical publications, provisioning, spares, etc) is desired.
     
    Job Number: 25637-1
    Job Location: MO
    Rate: open
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Designers - UGNX

    Description:
    * UGNX
    *This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft.
    *Mechanical and Electrical Systems
    *Must be able to obtain secret clearance
     
    Job Number: BO-MO-Mech
    Job Location: St. Louis, MO
    Rate: Neg.
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Unique Skills:
    • Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and interpret engineering documents and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support.
    • Systems design and/or qualification experience is a plus.
    • A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Auxiliary Mechanisms, Hydraulics, Crew and Equipment, Doors, Flight Deck and Furnishings, Fuel, and secondary structures.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-170
    Job Location: Savannah, GA
    Rate: $59 - $62/hour
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer

    Description:
    Mechanical Systems MRB Engineer (Production & Test Aircraft Support - TS II)

    Location: Savannah, GA
    Rate: $59.00 - $62.00/HR
    Long Term Contract Position


    Unique Skills:
    - Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support.
    - Strong design background and/or qualification experience is a plus.
    - A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Power Plant/ECS, Landing Gear, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 7261
    Job Location: Savannah, GA
    Rate: $59.00 - $62.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical/Design Engineer/Custom Interior/Mechanical Components

    Description:
    Mechanical/Design Engineer/Custom Interior/Mechanical Components
    Long Beach, CA
    Rate: $41.77-$54.30

    Unique Skills:

    Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams. Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems. Attention to visual appearance/aesthetics of completed designs is very important. Excellent communication skills and ability to work with operations technicians on the shop floor is required. Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus. • Bachelors or higher degree in Mechanical or Aerospace Engineering at an accredited 4 year University preferred. • Minimum five (5) years in the specific technical discipline or ten (10) years broad engineering experience in several technical disciplines with Bachelor's degree, • Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. • Experience with Catia V5 and AutoCAD required. • Strong written and verbal communication skills required.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7276
    Job Location: Long Beach, CA
    Rate: $41.77-$54.30
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX CAD DESIGNER III / NX, Teamcenter and GD&T WA

    Description:
    Job Title: NX CAD Designer
    Job Number: 159139/7006475
    Location: Redmond, WA
    Compensation: 56/hr max
    Assignment Length: 4 month contract

    Description:


    Duties: Create Aerospace engineering designs, drawings, and 3D CAD models under minimal direction from engineering staff. Perform tolerance studies as required on complex assemblies. Manage CAD data files and architecture. Expert knowledge of NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Must have mechanical engineering experience and ability to work independently. Experience with complex components and assemblies. Proficient at creating mechanical engineering drawings. Experience with high pressure and high temperature systems desired.

    Skills: Effective interpersonal and communication skills. Operate effectively in a team environment.
    Proficient experience using NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing. Ability to read and interpret mechanical engineering drawings and related specifications. Ability to write clearly and concisely. Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports. Proven skills with NX CAD Tool.

    Key Words/Requirements:

    Proficient experience using NX CAD System TeamCenter Unified Architecture and TeamCenter Engineering PLM System Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    Excellent experience in the creation of mechanical engineering drawings
    9+ Years of related Aerospace Industry experience


    Keywords:
    Education: BS in mechanical engineering discipline and 9 years of experience or equivalent combination of education and experience.
    # of Positions: 1

    Location:
    Redmond, WA
    11411 139th Place NE,

    Schedule Notes: 9/80 schedule. OT possible.
     
    Job Number: MB-7006475
    Job Location: Redmond, WA
    Rate: 56/hr max
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX CAD Designer III

    Description:
    NX CAD Designer III

    Location: Redmond, WA
    Rate: $50.00 - $56.00/HR
    Duration: 3+ month contract


    Duties:
    - Create Aerospace engineering designs, drawings, and 3D CAD models under minimal direction from engineering staff.
    - Perform tolerance studies as required on complex assemblies.
    - Manage CAD data files and architecture. Expert knowledge of NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System.
    - Must have mechanical engineering experience and ability to work independently.
    - Experience with complex components and assemblies.
    - Proficient at creating mechanical engineering drawings. Experience with high pressure and high temperature systems desired.


    Skills:
    - Effective interpersonal and communication skills.
    - Operate effectively in a team environment.
    - Proficient experience using NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System.
    - Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    - Ability to read and interpret mechanical engineering drawings and related specifications.
    - Ability to write clearly and concisely.
    - Knowledge of design practices, manufacturing techniques and inspection requirements.
    - May require the use of various computer systems to produce data, analysis and reports.
    - Proven skills with NX CAD Tool.


    Key Words/Requirements:
    - Proficient experience using NX CAD System
    - TeamCenter Unified Architecture and TeamCenter Engineering PLM System
    - Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    - Excellent experience in the creation of mechanical engineering drawings
    - 9+ Years of related Aerospace Industry experience


    Education:
    - BS in mechanical engineering discipline and 9 years of experience or equivalent combination of education and experience.
     
    Job Number: 7288
    Job Location: Redmond, WA
    Rate: $50.00 - $56.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Performance Engineer / strong dynamics background, ADAMS program, hydraulic damping experience, oil volume ratio monitoring / static/dynamic loads, retraction and vibration analysis for landing gear OH

    Description:
    Job Title: Performance Engineer
    Job Number: 158858/8057
    Location: Independence, OH
    Compensation: 70-75/hr
    Assignment Length: 12 month contract

    Description:

    Pay Rate max - $70-75/hour, depending on their experience and knowledge.
    12 month + assignment


    **Looking for an advanced concept developer, strong dynamics background, ADAMS program, hydraulic damping experience, oil volume ratio monitoring. Does not necessarily have to have aerospace background, automotive could work as well.


    Reporting to the Lead Engineer, you will be responsible for performing static/dynamic loads, retraction and vibration analysis for landing gear in response to regulatory / customer requirements and UTAS performance methodologies. You will also conduct sensitivity studies, perform trade studies, generate design study summary reports, prepare and present results to the customer at program reviews.

    Primary Responsibilities:
    • Provide technical guidance for all performance related tasks of the project assigned while working with the following:
    o Lead Engineer to ensure that performance tasks are properly managed to achieve project goals
    o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements
    o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust trouble-free product is developed
    • Executes performance activities including:
    o Customer / Suppliers:
    o Liaise with customer/Suppliers for all performance related tasks
    o Foster strong customer relationships through accountability, transparency and credibility
    • Integration / Planning:
    o Responsible and accountable for all performance tasks and its completion dates
    o Communicates progress and roadblocks to the Lead Engineer
    o Requires a good understanding of landing gear shock strut and actuation principles and operation.
    • Responsible for performing
    o Static/dynamic loads and vibration analysis for landing gear, actuation and subsystem structural design criteria;
    o Perform derivation of design loads and analysis of dynamic performance to ensure that customer and certification requirements are satisfied;
    o Develop the structural dynamics models and compute dynamic loads;
    o Perform systems hydraulic simulations
    o Develop operational and certification performance reports
    o Compute landing gear dynamic loads and landing impact for optimizing landing gear absorption characteristics
    o Perform dynamic analysis for optimizing retraction timing
    o Identify critical loading conditions and documentation of results in formal Engineering Reports
    o Be responsible for the providing detail sizing definition to designers and stress analysts.
    • Compliance
    o Ensures compliance to UTAS-LS Engineering methodologies
    o Maintains compliance to ITAR and regulatory requirements
    o Occasional travel between customer/suppliers and UTAS locations
    o Perform other duties as required


    Basic Qualifications

    Bachelor's degree in Mechanical or Aerospace Engineering
    • A minimum of 8 years of experience in analysis tools and techniques
    o 5 years of experience within the Aerospace industry; must include extensive experience in development of transport and / or military type aircraft
    • Demonstrated experience using ADAMS, Matlab / Simulink
    • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
    • Demonstrated ability to utilize Catia V5
    • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
    • Demonstrated ability to work directly with customers and suppliers
    • Understanding of performance based specification requirements, requirements management and verification.
    • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
    • Successful candidates must meet all requirements under ITAR & CCGP
    • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
    • US citizen, permanent resident alien or able to review all export-controlled technical information.
     
    Job Number: DW-8057
    Job Location: Independence, OH
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Design Engineer

    Description:
    Title: Product Design Engineer
    Location: Palo Alto, CA
    Duration: 3 month contract

    Target Start Date: 4/24/2017

    Overall Responsibilities:

    Requires mechanical engineering services including but not limited to mechanical engineering best practices, hand or spreadsheet calculations based on Nest input, 3D CAD modeling and 2D drafting, design of experiments, execution of experiments, and reports with recommendations and findings.

    Top 3 Daily Responsibilities:

    Design plastic components, metal components, connectors, PCB outlines and other elements (die cuts, fasters, liquid glues, thermal compounds, etc.) of consumer electronic devices.

    Detailed 3D CAD and CAE of product architecture.

    Build and trouble-shoot devices for assembly / fit, cosmetic flaws, root cause analysis of REL failures, cosmetic step/gap, thermal, water sealing, etc.

    Required Skills: Education: BS Mechanical Engineering 5+ years experience in Product Design.

    Proficient in 3D CAD (Unigraphics NX required, SolidWorks and Pro-E also applicable). Unigraphics NX required

    Nice to Have Skills/Not Required: Handheld, portable, small home electronics experience

    Demonstrated ability in plastic and metal design.
     
    Job Number: JO366961
    Job Location: Palo Alto, CA
    Duration: 3 months
    Start Date: 04/24/2017
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Jonathan Oleson
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Engineer / NX MRP actuators gears splines Teamcenter aerospace CA

    Description:
    Job title: Product Engineer
    Job Number: 158969/4575
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 12 month contract

    Description:

    Product Engineer

    GENERAL FUNCTION:

    This position is responsible for development of complex mechanical and hydromechanical components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Product Engineer devises new approaches for the problems encountered.
    Essential job functions: NATURE AND SCOPE:

    The Product Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military leading and trailing edge flap systems. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Product Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being system or component performance and integration. The incumbent will coordinate the work of drafters, technicians, design analysts, manufacturing engineers and others who assist in specific assignments as needed.


    To be considered for the position of Product Engineer, a candidate should have a minimum of an BS Degree, preferably in Mechanical or Aerospace Engineering plus 10 years of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. Seasoned knowledge of closed loop control systems, mechanical hardware designs, and good communication skills are also necessary.
    Required skills: 1. Person needs to be mechanically inclined. This will be beneficial when troubleshooting issues in the assembly line.
    2. Experience with measuring tools such as micrometers, calipers.
    3. Microsoft Office
    4. Experience with an MRP system
    5. Unigraphics Nx
    6. Teamcenter

    Preferred Experience:
    Experience with actuators, gears and splines preferred.
    Aerospace industry experience preferred.
    Scope: Must have good writing skills. The incumbent will be responsible to writing operations sheets for the manufacturing area.
    Must be a team player, incumbent will be working in a team and will be coordinating with multiple operating groups within the organization.

    Education: BS Degree, preferably in Mechanical or Aerospace Engineering plus 10 years of design/development engineering experience.
     
    Job Number: MB-4575
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer

    Description:
    Background in Aerospace, Mechanical, or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense.
    Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products. Must have experience with SAP and understanding or processing hardware in concert with SAP.
    The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required.
    Facilitate and lead IPD Team with members from all functions.
    • Planning, execution, coordination and communication of team activities and commitments
    • Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
    • Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs. • Ensure targeted goals (schedule and cost) is communicated to the team members
    • Identify, assess and manage the team’s risks
    • Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
    • Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
    • Meet design and design-to-cost requirements.
    • Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team. Project Engineers shall work to Standard Work and Procedures. Notifying the PEM immediately of any potential scope or ETC growth before the work is executed. Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements. Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
    Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans. Assist in creating program directives that define Earned Value Plans. Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware. Coordinate, track and support development and flight hardware build and test. Initiate in scope engineering changes working with all functions to implement approved changes.
    This will include marking drawings, copying prints, creating PDF’s to support electronic EC processes. Document activities and programs worked with time spent on various activities.
     
    Job Number: CT
    Job Location: Windsor Locks, CT
    Rate: 52.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer II - Electric Propulsion

    Description:
    Project Engineer II - Electric Propulsion

    Location: Redmond, WA
    Rate: $50.00 - $53.00/HR
    1 year contract

    ** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **
    ** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **
    ** Candidates should have recent work experience **
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    - Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Company is the premier supplier of these enabling propulsion systems.

    - The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
    - The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
    - The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products.

    - Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
    - Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.

    The following is an approximate split of typical duties:
    70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify company products are in compliance with customer requirements. Demonstrate to our customers that company is the best value supplier for their propulsion needs.
    20% - Support proposal activities and manage internal research and development efforts as assigned.
    10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions.

    - Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.

    Skills:
    Required:
    - At least 2 years work experience in an aerospace field, working on flight hardware.
    - Must know MS Office programs.
    - Must have minimum BS degree in mechanical or aerospace engineering.

    Desired:
    - Experience with electric propulsion devices, particularly hall thrusters or ion engines.
    - Experience with testing flight hardware and production of flight hardware.


    Education:
    - A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required.
    - A Master's degree or higher in an Engineering discipline or Physics is preferred.
    - Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
     
    Job Number: 6995
    Job Location: Redmond, WA
    Rate: $50.00 - $53.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer II - Propulsion / ** Candidates should have propulsion experience. Chemical propulsion, electrical propulsion, or plasma physics are acceptable ** URGENT WA

    Description:
    Job Title: Project Engineer II
    Job Number: 158323/6312522
    Location: Redmond, WA
    Compensation: 53/hr
    Assignment Length: 12 month contract

    Description:


    Duties:
    ** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **



    ** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **



    ** Candidates should have recent work experience **



    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    ** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role ** ** Candidates should have recent work experience ** ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Aerojet is the premier supplier of these enabling propulsion systems. The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters. The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware. The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products. Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals. Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations. The following is an approximate split of typical duties: 70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet is the best value supplier for their propulsion needs. 20% - Support proposal activities and manage internal research and development efforts as assigned. 10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions. -Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.
    Skills: Required: At least 2 years work experience in an aerospace field, working on flight hardware. Must know MS Office programs. Must have minimum BS degree in mechanical or aerospace engineering. Desired: Experience with electric propulsion devices, particularly hall thrusters or ion engines. Experience with testing flight hardware and production of flight hardware. Keywords: Electric propulsion Hall Thruster Ion thruster Arcjet
    Keywords:
    Education: A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required. A Master's degree or higher in an Engineering discipline or Physics is preferred. Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
    # of Positions: 1

    Location:
    Redmond, WA
    11411 139th Place NE,

    Schedule:
    Start Date: 02/20/2017
    Estimated End Date: 02/20/2018
    Hours Per Week: 40.00
    Hours Per Day: 8.00
    Standard Schedule:
    Schedule Notes: 9/80 Schedule. OT possible.
     
    Job Number: MB-6312522
    Job Location: Redmond, WA
    Rate: 53/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Manager

    Description:
    ***U.S. Citizens only


    Drives project management for technical and process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.


    Project Engineer with a background in Aerospace, Mechanical, or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense. Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products. Must have experience with SAP and understanding or processing hardware in concert with SAP. The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions. • Planning, execution, coordination and communication of team activities and commitments • Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test. • Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs. • Ensure targeted goals (schedule and cost) is communicated to the team members • Identify, assess and manage the team’s risks • Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments. • Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns. • Meet design and design-to-cost requirements. • Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team. Project Engineers shall work to UTAS Space Systems Standard Work and Procedures. Notifying the PEM immediately of any potential scope or ETC growth before the work is executed. Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements. Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
    Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans. Assist in creating program directives that define Earned Value Plans. Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware. Coordinate, track and support development and flight hardware build and test. Initiate in scope engineering changes working with all functions to implement approved changes.
    This will include marking drawings, copying prints, creating PDF’s to support UTAS electronic EC processes.
    Document activities and programs worked with time spent on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Some limited program travel may be required.
    Overtime up to 12 hrs/week may be authorized
     
    Job Number: CT 37935
    Job Location: Windsor Locks, CT
    Per Diem: yes
    Overtime: yes
    Duration: 12 mos
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Carolyn
    Address: 42 MAIN ST
    City, State: WINDSOR LOCKS, CT 06096
    Phone: 860/254-6335
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Manager

    Description:
    Project Manager
    Cary, NC
    12+ month contract

    Please note, this is a Technical Project Manager!

    Job Description:
    •Work with client to determine scope, deliverables, and schedule for engineering projects.
    •Create a project plan for the project.
    •Comply with all project deliverables.
    •Track and report status, including roadblocks to meeting deliverables and potential resolution of those roadblocks.
    •Good in onsite/offshore coordination

    Degree Requirements:
    •BS/MS in Mechanical Engineering
    •Proficient in Creo 2.0/3.0 and Wind-chill.
    •Experience in Top Down design approach
    •Experience in GD&T and Tolerance Stack
    •Knowledge on Sheet metal design and manufacturing
    •Understanding of project steps/requirements in NPD as well as Sustenance projects
    •Aware of ECO/ ECN process.
     
    Job Number: 51467
    Job Location: Cary, NC
    Rate: 42.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Propulsion Design Engineer

    Description:
    Seeking a Propulsion Design Engineer for an opening in Hawthorne, CA.

    Ability to work in a team-based environment using requirements for a new propulsion system or component and convert those requirements into one or more 3-dimensional concepts, using NX, in the form of a mechanical layout for review.
    Ability to operate in the fast-paced environment, where change of direction is frequent. The ability to manage change effectively, respond to change quickly, and actively put risk mitigation plans in place are critical.
    Consult with manufacturing engineers, thermal and structural analysts, development engineers, materials and process engineers and other product team members to refine the concept into a viable prototype to be further pursued for testing, development, qualification and flight.
    Use ANSYS to conduct basic finite element analysis to iterate the concept until it reaches a level of maturity where it can be studied by the Propulsion Analysis group for final, comprehensive analysis as defined by the project objectives.
    Take a general conceptual layout of a system or component device and break it down into detail parts that balance requirements for operability, reliability, cost, weight, producibility and several other criteria. Generate detail part production drawings fully dimensioned with GD&T verified to meet functional requirements by use of tolerance stackups.
    Interface with vendor or in-house fabrication and assembly teams during design and prototype hardware builds. Incorporate any produciblity lessons learned by design change and drawing revision.
    Support development testing efforts by incorporating design changes if necessary to further improve hardware performance or reliability.
    Provide ongoing technical support to production effort with engineering change orders to make design changes that improve producibility or reliability.
    Responsible for configuration management at the system or subsystem level using Teamcenter.
    Results will meet requirements, applicable specifications and be manufacturable.

    REQUIRED EXPERIENCE:
    Ability to design parts, tooling and test fixtures necessary to build rocket engine hardware Familiar with high strength, oxidation resistant, propellant compatible materials for use in cryogenic and high temperature environments Familiar with manufacturing capabilities (typical tolerances) and processes: turning, milling, drilling, reaming, EDM, grinding, brazing, welding, 3D printing Familiar with mechanical seals (metallic and elastomeric o-rings) and threaded fasteners Knowledge of high pressure fluid tubing systems and typical fittings for aerospace hardware and applicable standards Basic understanding of NDT techniques and how to design hardware for ease of inspection Fundamental understanding and ability to implement GD&T Ability to do hand calcs to roughly size structural elements of a design Ability to pre-size components using finite element modeling Proficient in NX, ANSYS

    EDUCATION:
    High School Diploma

    WORK HOURS:
    5/50, 1st Shift: 8:30AM - 5:30PM
     
    Job Number: 162718
    Job Location: Hawthorne, CA
    Rate: $53.00
    Per Diem: Yes
    Overtime: Yes
    Duration: 4 mths
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Assurance Engineer II

    Description:
    Quality Assurance Engineer - Level 2
    Orlando, FL
    1 Year Contract
    $35.00-40.00/Hr

    Description

    Coordinates with Sourcing, Operations, Design Engineering, the Supply Base and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products. Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability. Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance. Facilitate technical trade-offs and standardization that may lead to more economical procurement. Recommends design changes to mitigate production issues. Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability. The candidate will be a member of the Supplier Quality Engineering Team responsible for assuring the quality and technical performance of deliverables from suppliers for LMSTAR and Training & Simulation Solutions programs based out of MST Orlando. The selected candidate must be a go-getter, willing to proactively tackle whatever it takes and be a team player to solve procurement, supplier related production, Test, Quality, Materials, FAI and Receiving issues. This individual will interface with Manufacturing Ops, MEs, Sourcing, Engineering, Suppliers, Integration/Test and Receiving personnel. Management and Operations. Responsibilities include reviewing and establishing Quality Text Clauses for material PRs/POs, verifying First Articles, Test Results and driving problem resolution. Responsible for basic quality services including: supplier capability and performance evaluations, verification of special processes, part acceptance planning, manufacturing process and quality plan review, defect analysis, timely root cause and corrective action implementation for affected products. Candidate will be required to use analysis to make recommendations on potential source selection decisions based on risk and historical performance. The success of the person in this position will greatly depend on his/her ability to interface well with multiple stakeholders, effectively work in a dynamic environment, have strong interpersonal skills, and be able to communicate with positive impact.



    Skill/Experience/Education

    Mandatory:

    - Bachelors degree from an accredited college in a related technical discipline, or equivalent experience/combined education.
    - Excellent written & oral communication skills; familiarity with defect analysis and root cause analysis methodologies; familiarity with ISO9001 & AS9100 quality management systems; familiarity with reading engineering drawings per ASME Y14.5; familiarity with GD&T (Geometric Dimensioning & Tolerancing; Engineering, IEEE Stds., Quality and/or Supply Chain Management discipline related experience.
    - Must have ability to obtain a Secret security clearance

    Desired:

    Root Cause Analysis; FMEA / Design Qualification and/or FAI experience; Understanding of the Manufacturing Processes; Ability to work effectively in a cross-functional team environment. Knowledge of mechanical, electrical, and/or aerospace engineering and production processes preferred.
     
    Job Number: 7006
    Job Location: Orlando, FL
    Rate: 35.00-40.00/Hr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability Engineer

    Description:
    ** Must either have a current Secret clearance or have had a Secret clearance in the last two years. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
    ** U.S. Citizens per client **
    ** Must be able to satisfy federal government requirements for access to government information.

    Job Details
    1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
    2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
    3. Complete failure modes, effects, and criticality analysis and hazard analysis.
    4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
    5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
    6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
    7. Perform Probabilistic Risk Assessments.
    8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
    9. Embrace a continuous improvement mindset.
    10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

    Skills:
    * Ability to perform FMEA is required
    * Ability to perform statistical analysis is preferred
    * Product reliability testing and modeling capability is preferred
    * Proven competency in root cause analysis preferred
    * Familiarization with spacecraft and/or launch vehicle systems is preferred
    * Passion for advancing the commercial space industry and human spaceflight is preferred
    * Excellent verbal and written communication skills are required
    * Strong work ethic and drive to succeed are required
    * Understanding and experience with electrical hardware is required. Experience with mechanical hardware is also required.

    Education:
    BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above. Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
     
    Job Number: CA37657
    Job Location: Canoga Park, CA
    Rate: 70.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 10 months
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability Engineer

    Description:
    Title: Reliability Engineer
    Location: Canoga Park, CA
    Duration: 10+ months


    Duties:
    1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
    2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
    3. Complete failure modes, effects, and criticality analysis and hazard analysis.
    4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
    5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
    6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
    7. Perform Probabilistic Risk Assessments.
    8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
    9. Embrace a continuous improvement mindset.
    10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

    Skills:

    Ability to perform FMEA is required
    Ability to perform statistical analysis is preferred
    Product reliability testing and modeling capability is preferred
    Proven competency in root cause analysis preferred
    Familiarization with spacecraft and/or launch vehicle systems is preferred
    Passion for advancing the commercial space industry and human spaceflight is preferred
    Excellent verbal and written communication skills are required
    Strong work ethic and drive to succeed are required
    Understanding and experience with electrical hardware is required.
    Experience with mechanical hardware is also required.
    Ability to obtain a security clearance is required.
    Education:


    BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above.
    Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
     
    Job Number: KD366412
    Job Location: Canoga Park, CA
    Per Diem: No
    Duration: 10+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Kris Douglas
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability Engineer V

    Description:
    Reliability Engineer V

    Location: Canoga Park, CA
    Rate: $70.00 - $80.00/HR
    6+ month contract

    **Looking for candidates with expertise in Mechanical parts and some Electrical parts. This role focuses mainly on Mechanical parts. Must be knowledgeable in Reliability Predication Techniques as well as very strong in Probabilistic Reliability Assessments and Comparative Design Reliability Predictions. Candidates must also have a strong desire to interact with IPTs and hardware owners to understand their designs and to influence their designs (communication skills) **

    **MUST be able to obtain a Secret Clearance**
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
    2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
    3. Complete failure modes, effects, and criticality analysis and hazard analysis.
    4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
    5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
    6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
    7. Perform Probabilistic Risk Assessments.
    8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
    9. Embrace a continuous improvement mindset.
    10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

    Skills:
    * Ability to perform FMEA is required
    * Ability to perform statistical analysis is preferred
    * Product reliability testing and modeling capability is preferred
    * Proven competency in root cause analysis preferred
    * Familiarization with spacecraft and/or launch vehicle systems is preferred
    * Passion for advancing the commercial space industry and human spaceflight is preferred
    * Excellent verbal and written communication skills are required
    * Strong work ethic and drive to succeed are required
    * Understanding and experience with electrical hardware is required.
    * Experience with mechanical hardware is also required.
    * Ability to obtain a security clearance is required.

    Education:
    - BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above.
    - Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
     
    Job Number: 7239
    Job Location: Canoga Park, CA
    Rate: $70.00 - $80.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6+ mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability Engineer V CA

    Description:
    Job Title: Reliability Engineer V
    Job Number: 159027/6813150
    Location: Canoga Park, CA
    Compensation: 80/hr DOE
    Assignment Length: 10 month contract

    Description:

    Additional Information: Updated job description with the following:

    ** UPDATE: Looking for candidates with expertise in Mechanical parts and some Electrical parts. This role focuses mainly on Mechanical parts. Must be knowledgeable in Reliability Predication Techniques as well as very strong in Probabilistic Reliability Assessments and Comparative Design Reliability Predictions. Candidates must also have a strong desire to interact with IPTs and hardware owners to understand their designs and to influence their designs (communication skills) **


    Duties:

    ** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **


    1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.

    2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.

    3. Complete failure modes, effects, and criticality analysis and hazard analysis.

    4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.

    5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results

    6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.

    7. Perform Probabilistic Risk Assessments.

    8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.

    9. Embrace a continuous improvement mindset.

    10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.


    Skills:

    * Ability to perform FMEA is required
    * Ability to perform statistical analysis is preferred
    * Product reliability testing and modeling capability is preferred
    * Proven competency in root cause analysis preferred
    * Familiarization with spacecraft and/or launch vehicle systems is preferred
    * Passion for advancing the commercial space industry and human spaceflight is preferred
    * Excellent verbal and written communication skills are required
    * Strong work ethic and drive to succeed are required
    * Understanding and experience with electrical hardware is required. Experience with mechanical hardware is also required.
    * Ability to obtain a security clearance is required.

    Keywords:

    Education: BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above. Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
    # of Positions: 1

    Location:
    Canoga Park, CA
    8900 Desoto Ave
     
    Job Number: MB-6813150
    Job Location: Canoga Park, CA
    Rate: 70-80/hr max
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SUPPLIER QUALITY ENGINEER - AS9100 / FPMEA / RCCA - AEROSPACE / DEFENSE

    Description:
    Johnson Service Group (JSG) is teamed with a leader in the aerospace, defense and commercial markets.  Our client is seeking a talented Supplier Quality Engineer (SQE) to provide organizational support for quality & regulatory requirements compliance, system and process improvements as well as determining root cause and corrective action.

    Scope of Experience and Responsibilities:

    -3-6+ years of quality engineering experience within a machine shop, assembly, inspection and/or test environment, ideally with high precision parts and products, such as hydraulic actuators. 

    Required experience:

    -AS9100 - Assessments and product process walks

    -PFMEA - Assist suppliers with Process Failure Modes & Effects Analysis 

    -PPAP - Production Part Approval Process review and approval

    -RCCA - Root Cause and Corrective Action Analysis expertise, as well as supplier development using quality tools, (APQP, etc.)

    -DFAR - requirements knowledge, government contracting experience. Knowledgeable of industry standard specifications.

    -Evaluate Quality Management System (QMS) procedures, documents and work instructions.

    -Track, report and analyze quality metrics and identify improvements.

    -Quality engineering activities will include:  First Article Inspection (FAI); Measurement System Analysis (MSA); and Statistical Process Control (SPC) processes.

    -Heavily involved with regulatory and/or customer audits. 

    -Drive continuous improvement principles, methods and tools. 

    -Perform internal quality audits.

    -Knowledge of Title 14 CFR Parts 21, 43, 45, and 145 and related FAA requirements.

    -Solid understanding of corresponding regulatory and compliance requirements.

    -Evaluates procedures and work instructions that are required per the Quality Management System.

    -Working knowledge in the interpretation of engineering specifications, mechanical drawings, electrical schematics and Geometric Dimensioning and Tolerancing (GD&T).

    -Knowledge of ISO9001, AS9100, TS16949, QS9000 and/or TS-16949.

    -Strong knowledge of Six Sigma principles, tools and methodology, and advocates utilization throughout the organization.

    -Understanding of PLC quality process and the use of quality planning tools.

    -Excellent communication skills.

    Education/Certification:

    -Bachelor's Degree in a related technical field. 

    -Green Belt certification is preferred.

    -ASQ certification is a plus.

    Type of Employment:  Long term contract  

    Location:  Santa Clarita, CA

    Compensation:  Highly competitive



     
     
    Job Location: Santa Clarita, CA
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 18-24 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Jay Kerrigan
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SW Engineer(C/C++, COTS, LINUX, VxWorks, Git, Embedded SW) in Grand Prairie, TX #1367AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159150
    Location: Grand Prairie, TX
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Exempt
    Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.

    Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.

    Skill/Experience/Education
    Mandatory:
    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience.

    Must have active/transferable Secret Clearance prior to submittal of resume.

    Desired:
    Driver Development, Python, ROS, CODESYS

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    COTS SBC 0-3 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    VxWorks 4-5 Years Yes
    Git 4-5 Years Yes
    J1939 or CANBus Experience 4-5 Years Yes
    Eclipse 4-5 Years Yes
    Ground Vehicles and Autonomy Experience 4-5 Years Yes
    Embedded SW Engineering 4-5 Years Yes
    Driver Development 0-3 Years No
    Python 0-3 Years No
    CODESYS 0-3 Years No
    ROS 0-3 Years No
     
    Job Number: #1367AS
    Job Location: Grand Prairie, TX
    Rate: Open, DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Safety Engineer - Level 1

    Description:
    Safety Engineer - Level 1

    Location: Marinette, WI
    Rate: $26.00/HR
    6 month contract
    1st Shift

    **CANDIDATE MUST HAVE SHIP BUILDING OR SHIP YARD REPAIR EXPERIENCE IN A SAFETY POSITION**

    Description
    The successful candidate will:
    1. Independently review and enforce Hull, Mechanical, Electrical and Mission Systems equipment care and protection standards to be utilized from equipment delivery across hulls in production through ships delivery.
    2. Provide input to the preventative maintenance team for accountability of care and protection standards.
    3. Provide deck plate support to the onsite Company Production Team.
    4. Assist in the monitoring of HM&E and Mission Systems equipment.
    5. Assist the onsite Company Production Team in documenting Care and Protection Deficiencies.
    6. Provide Daily, Weekly, Monthly, and Outlook reports to the LM Production Team, Onsite Management, and Senior Management.

    Skill/Experience/Education
    Mandatory:
    **CANDIDATE MUST HAVE SHIP BUILDING OR SHIP YARD REPAIR EXPERIENCE IN A SAFETY POSITION**
    - Ability to write reports clearly and prepare PowerPoint presentations required.
    - Working knowledge of safety procedures in shipbuilding.
    - Working knowledge shipboard mechanical/electrical systems.
    - Attention to detail.
    - No physical limitations as this position will be required to inspect ongoing work throughout the ship including confined spaces.

    Desired:
    - Proven engineering skills of ship’s equipment and systems.
    - Strong working knowledge shipboard Hull, Mechanical, Electrical and Mission Systems equipment.
    - HM&E/Mission Systems work history.
    - Working knowledge of logistics.
    - Working knowledge of shipyard safety standards.
     
    Job Number: 6955
    Job Location: Marinette, WI
    Rate: $26.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Assembly Mechanic

    Description:
     Looking for a “mechanical” candidate, not electrical. There should be familiarity with equipment (i.e. drill presses, rivet guns, etc.).
     Primarily searching for experience with engines, as this candidate will be tearing down aircraft engines and preparing for rebuild. Mechanical assembly can be considered, but focus is on Aircraft/Military/or possibly automotive engines.

    Summary

    To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

    Responsibilities:

    > Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
    > Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
    > Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
    > Resolves manufacturing problems.
    > Maintains good housekeeping, safety standards, and calibration requirements.
    > May set up production equipment.
    > Practices Total Quality principles and concepts.

    Qualifications:

    > 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
    > Specialized and extensive experience in mechanical assembly techniques.
    > Military and commercial quality specifications.
    > Manufacturing policies and procedures.
    > Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
    > Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
    > Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
    > Knowledge of shop math and ability to apply math skills.
    > Electrostatic discharge procedures and methods.
    > Ability to work well with others employing team principles.
    > Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
    > All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
    > Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


    Mark A Ludwig
    Vice President / Sr. Account Executive
    Global American Staffing
    Email: mludwig@globalams.us
    Direct: (508) 434 – 6180
    Office: (508) 230 – 5030 x123
    www.globalamericanstaffing.com
     
    Job Number: 015_2017
    Job Location: Cockeysville, MD
    Rate: DOE
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: GLOBAL AMERICAN STAFFING
    Attention: Mark A Ludwig
    Address: 12 HARDING ST STE 204-205
    City, State: LAKEVILLE, MA 02347
    Phone: 508/230-5030
    800 Phone: 800/510-8050
    Fax Phone: 508/923-0005
    Website: www.globalamericanstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Designer

    Description:
    Description
    • Provide comprehensive mechanical or electrical design support for projects related to pipeline facilities (measurement and regulation stations, compressor stations, LNG plants, pipelines, etc.).

    Primary Job Duties and Responsibilities
    • Analyzes project scope and engineering design criteria of assigned electrical or mechanical design projects to determine design manpower requirements, engineering criteria, etc.
    • Selects materials and prepares material lists based on standards, specifications, operation requirements and engineers’ direction
    • Prepares detailed functional and physical design drawings of electrical or mechanical equipment and related facilities in accordance with accepted design practices and standards
    • Assembles and reviews project drawings for accuracy, completeness, content and compliance with accepted drawing standards and format
    • Revises drawings in accordance with checking feedback and other requirements
    • Provides assignments, guidance and instruction to less experienced designers as required
    • Participates in design conferences and makes field trips concerning projects
    • Reports status of designs to project manager and makes recommendations relative to manpower requirements
    • Participates in task forces, conference and training sessions to streamline or re-engineer internal/external processes as required
    • Performs any additional responsibilities as requested or assigned

    Qualifications
    Position Requirements:
    • An associate’s degree in engineering or a related field, a technical degree, or equivalent work experience (typically six years of related, progressive work experience would be needed for candidates applying for this position who do not possess a degree.)
    • Three to four years of related experience in gas pipeline engineering, operations or construction
    • A strong analytical ability, good interpersonal and human relation skills
    • Good judgment in problem solving and decision-making
    • Thorough understanding of related drafting tools, procedures and techniques
    • Ability to provide work direction to assigned personnel
    • Working knowledge of AutoCAD and discipline-related applications
    • Knowledge in engineering and operations related, codes, standards and procedures, i.e. (DOT, FERC, OSHA, NNG, etc.)
    • Strong oral and written communication skills
    • Excellent PC skills, including familiarity with Windows environment and proficiency with Microsoft Office applications
    • Ability to work with changing priorities and exacting deadlines
    • Ability to make periodic field trips as required
    • In-depth working knowledge of gas pipeline industry and NNG systems preferred
    • Ability to prioritize and handle multiple tasks and projects concurrently
    • Employees must be able to perform the essential functions of the position, with or without an accommodation.
    • All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
     
    Job Number: 17-06611
    Job Location: Omaha, NE
    Rate: Open
    Per Diem: Yes
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Robin
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Mass Properties Engineer (CA and CO)

    Description:
    Senior Mass Properties Engineer:
    Positions in CA and CO
    Desired skills: MICROSOFT OFFICE;;CATIA;SOLIDWORKS;

    Senior Mass Properties Engineer: provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
    Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
    Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
    Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
    Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.
     
    Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
    Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks or CATIA preferred)
    Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
    Must be a problem solver capable of working alone or with a technical team in a fast paced environment.
     
    Requires a BS in Related Field.
    MUST be US Persons

    The Structures Company is an AA/EOE.

    Mark Sharp
    marksharp@thestructurescompany.com
    714-823-3000x801
     
    Job Location: CA
    Per Diem: yes
    Overtime: yes
    Duration: 12 mos
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Mark Sharp
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA URGENT

    Description:
    AERO REQ 0355 158194
    Software Engineer-N
    Description
    This Flight Controls lead position is a technical position performing complex guidance and control design and analysis for LM Aero - Advanced Development Programs. Responsible for guiding the design, development, integration and test of flight control laws. Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration, and test of vehicle systems. Prior experience in hypersonic flight regime is highly desired. Must have a good understanding of aircraft stability, control and aerodynamic characteristics. Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. The selected candidate will represent the program as a technical subject matter expert within the field of flight controls and will interact with senior leadership, customer and suppliers at program meetings.
    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance with ability to obtain SAP/SAR access
    Minimum 10+ years of hands-on experience in the design of flight control laws (algorithms & software) for aviation applications. Proficient with simulation/control laws (6-degree-of-freedom) development tools, aircraft/system modeling and Matlab/Simulink software.
    Desired:

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
    Demonstrated experience in all phases of flight control laws design life cycle - from requirements development, conceptual design, detailed design, code generation, software verification & validation, ground test and flight test phases. Knowledge and experience in Guidance and Control Algorithm design and implementation for high speed weapons. Familiarity with flight worthy software development process.
     
    Job Number: DW-0355
    Job Location: Palmdale, CA
    Rate: 65-75/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA URGENT

    Description:
    AERO REQ 0354 159001
    Software Engineer-N
    Description
    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance. Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.
    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance
    MATLAB/Simulink
    Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
    Desired:

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience
    Proficient with 6-degree-of-freedom simulation/control laws development tools, aircraft/system modeling and Matlab/Simulink software
     
    Job Number: DW-0354
    Job Location: Palmdale, CA
    Rate: 65-75/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA URGENT

    Description:
    AERO REQ 0353/159143
    Software Engineer
    Palmdale, CA
    65-75/hr DOE
    4 months

    Description
    This GN&C engineer position is with our Historic Skunk Works in Palmdale, California. This is a technical position performing complex guidance and control design and analysis for precision guided munition systems. Job responsibilities include GNC System design, analysis, modeling, and simulation. Apply knowledge of guidance, navigation, and control theory to develop optimum trajectory guidance laws. Develop autopilot control laws (modern and classical). Develop guidance algorithms and conduct flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis. Apply digital signal processing techniques and navigation system error analysis to verify sensor and filter performance. Perform post flight reconstruction and analysis. Develop, modify, and maintain software tools. Perform research and prepare presentations and reports.
    Skill/Experience/Education
    Mandatory:

    Current SECRET and ability to obtain a SAP/SAR clearance
    MATLAB/Simulink
    Desired:

    Demonstrated track record developing advanced autopilots, guidance laws and Kalman Filtering.
    Master's Degree in Electrical, Mechanical or Aerospace Engineering or Applied Mathematics or Applied Physics 7+ years of experience in Guidance, Navigation or Controls theory and analysis.
     
    Job Number: DW-0353
    Job Location: Palmdale, CA
    Rate: 65-75/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA URGENT

    Description:
    AERO REQ 0390 158300
    Title: Software Engineer-N
    Work Location: Palmdale, CA
    Start Date: 02/13/2017


    Job Description:
    Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance.


    Mandatory Skills:
    Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance.


    Desired Skills:
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
     
    Job Number: JE-0390
    Job Location: Palmdale, CA
    Rate: 65-70/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA URGENT

    Description:
    AERO REQ 0392 158396
    Software Engineer-N
    Description
    Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements.
    Skill/Experience/Education
    Mandatory:


    Current SECRET clearance
    MATLAB/Simulink;. Significant Flight Controls and Flight Simulation experience. Complex organization and documentation skills are required Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment
    Desired:

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
     
    Job Number: JE-0392
    Job Location: Palmdale, CA
    Rate: 65-70/hr
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Specialist Engineer IV / Sensors

    Description:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    ** Candidates must have experience with designing and developing sensors (temperature, pressure, speed, displacement, position, flow, vibration, etc.) **



    -Design and development of flight and ground test instrumentation (temperature, pressure, speed, vibration and position sensor) to be used in liquid propulsion engine systems.

    -Coordination of activities including hardware fabrication support with other internal organizations such as component engineering, manufacturing, quality, and test.

    -Perform instrumentation test data processing and analysis as required in support of liquid rocket engine hot-fire testing and/or component testing.



    Skills:
    10+ years of Instrumentation design/development experience in sensor development including temperature, pressure, speed, displacement, position, flow and vibration sensors.



    Required:

    -Excellent oral and written communication skills

    -Strong troubleshooting and problem solving skills

    -Familiarity with data acquisition systems, data processing and signal conditioning



    Desired:

    -Excellent oral and written communication skills

    -Strong troubleshooting and problem solving skills

    -Familiarity with data acquisition systems, data processing and signal conditioning



    Education:
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics

    -MS degree preferred
     
    Job Number: 7003446
    Job Location: Canoga Park, CA
    Rate: 61
    Duration: 6+ Months Possible Direct
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: A.J. Schweiger
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Specialist Engineer IV / Sensors

    Description:
    Specialist Engineer IV / Sensors

    Location: Canoga Park, CA
    Pay Rate: DOE ($55/hr - $61/hr)
    Duration: 6+ month contract
    Shift: Regular 40 hour week, OT possible

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    ** Candidates must have experience with designing and developing sensors (temperature, pressure, speed, displacement, position, flow, vibration, etc.)

    Duties:
    -Design and development of flight and ground test instrumentation (temperature, pressure, speed, vibration and position sensor) to be used in liquid propulsion engine systems.
    -Coordination of activities including hardware fabrication support with other internal organizations such as component engineering, manufacturing, quality, and test.
    -Perform instrumentation test data processing and analysis as required in support of liquid rocket engine hot-fire testing and/or component testing

    Skills: (Required):
    - 10+ years of Instrumentation design/development experience in sensor development including temperature, pressure, speed, displacement, position, flow and vibration sensors.
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics
    -Excellent oral and written communication skills
    -Strong troubleshooting and problem solving skills
    -Familiarity with data acquisition systems, data processing and signal conditioning

    Education:
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics
    -MS degree preferred
     
    Job Number: 7274
    Job Location: Canoga Park, CA
    Rate: 55.00-61.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Specialist Systems Engineer with active secret / rocket propulsion URGENT FL

    Description:
    Job Title: Specialist Systems Engineer
    Job Number: 158427/6405294
    Location: Jupiter, FL
    Compensation: 68/hr
    Assignment Length: 6 month contract
    Active Secret Required

    Candidates needed with Secret Clearances for these 3 openings! Manager said that he needs candidates with primarily Hardware experience. A lot of the candidates so far have had primarily Electrical experience rather than Hardware experience.

    ** Candidates must have dedicated Hardware experience (not looking for Software or Electrical engineers) **

    Job Title: Specialist Systems Engineer IV


    Remaining Positions: 3

    Duties:
    ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **


    Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
    Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
    Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
    Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
    Represents the organization in conferences to resolve important questions and to plan and coordinate work.
    May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
    Develops solutions to complex problems which require the use of ingenuity and creativity.
    Work is reviewed at extended intervals for desired results and achievement.
    Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.


    -60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates

    requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

    -15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

    -15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

    -10% - Communicates results in oral presentations and written communication.

    Skills:
    Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
    Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
    Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
    Education:
    Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
    Advanced degree desirable.
    Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
     
    Job Number: MB-6405294
    Job Location: Jupiter, FL
    Rate: 68/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Specialist Systems Engineer IV

    Description:
    Specialist Systems Engineer IV

    Location: Jupiter, FL
    Rate: $60.00 - $68.00/HR
    6 month contract


    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

    - Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
    - Typical responsibilities include:
    1. May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
    2. Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
    3. Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
    4. Represents the organization in conferences to resolve important questions and to plan and coordinate work.
    5. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
    6. Develops solutions to complex problems which require the use of ingenuity and creativity.
    7. Work is reviewed at extended intervals for desired results and achievement.
    8. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

    -60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

    -15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

    -15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

    -10% - Communicates results in oral presentations and written communication.

    Skills:
    - Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
    - Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
    - Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).

    Education:
    - Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
    - Advanced degree desirable.
    - Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
     
    Job Number: 7022
    Job Location: Jupiter, FL
    Rate: $60.00 - $68.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Calibration Technician Lvl 3(physical/Dimensional) in Stennis Space Center, MS #144993AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job title: Sr. Calibration Technician
    Job Number: 144993
    Location: Stennis Space Center, MS
    Compensation: DOE
    Assignment Length: long term contract

    Description:

    Calibrate electronic and physical mechanical test and measuring equipment. Calibration to include Commercial and Government Owned equipment with the areas of calibration being determined by equipment backlog Set up calibration stations according to detailed specifications, blue prints, drawings and requirements.

    Performs calibration/certifications/verifications of Electronic, Physical and Mechanical test and Measurement Equipment. Duties to include verifications of equipment accuracies by comparison to known standards. Adjustment to the equipment as necessary to meet industry standards for accuracy and customer requirements. Recording and documenting calibration information within a controlled database. Candidate must be able to follow documented processes to perform a combination of manual and automated calibrations utilizing automation software such as Fluke MetCal and Measurements International Software in accordance to calibration procedures and within the Stennis quality system. Candidate must have knowledge of proper adjustment procedures for test and measurement equipment and repair techniques. Candidate must be able to work independently with little assistance.

    Required Minimums

    Level 2

    High School diploma or equivalent experience / combined education with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 to 7 years of experience. Required Supervision: General supervision with instructions given for routine work and detailed instruction for new lines of work or special assignments

    Level 3

    A.S. degree in a technical field or ASQ Calibration technician certification or PMEL training and 5-10 years of experience. Knowledgeable in the use of calibration automation stations and in M&TE troubleshooting and repair methods and techniques

    Desired Skills

    Basic electronic and Physical Dimensional calibration Experience. Electronic RF Microwave, Physical Dimensional, Flow Calibration experience. Must demonstrate good communications skills, verbal and written as well as solid organization skills.

    Security Clearance: None (but ability to obtain a clearance if needed)
     
    Job Number: #144993AS
    Job Location: Stennis Space Center, MS
    Rate: Open, DOE
    Per Diem: N/A
    Duration: open ended contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Electrical Engineer

    Description:
    • Responsible for design, development and certification support of avionics/electrical systems on Defense Company T-6C aircraft.
    • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23.
    • Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool.
    • Assist in development of functional test documents for avionics/electrical systems.
    • Conduct equipment, system, and aircraft ground testing at Defense Company, Supplier or other testing facilities.
    • Coordinate with other Aviation Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety.

    Required Skills:
    Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint. Strong written and verbal communication skills and competency in one of the subject areas listed above. Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required.

    Required Education: Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology.
     
    Job Number: KS0407
    Job Location: Wichita, KS
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: GCP Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Engineer III / Sensors

    Description:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    ** Candidates must have experience with designing and developing sensors (temperature, pressure, speed, displacement, position, flow, vibration, etc.)



    -Design and development of flight and ground test instrumentation (temperature, pressure, speed, vibration and position sensor) to be used in liquid propulsion engine systems.

    -Coordination of activities including hardware fabrication support with other internal organizations such as component engineering, manufacturing, quality, and test.

    -Perform instrumentation test data processing and analysis as required in support of liquid rocket engine hot-fire testing and/or component testing

    Skills:
    Required:

    -7+ years of Instrumentation design/development experience in sensor development including temperature, pressure, speed, displacement, position, flow and vibration sensors.



    Desired:

    -Excellent oral and written communication skills

    -Strong troubleshooting and problem solving skills

    -Familiarity with data acquisition systems, data processing and signal conditioning



    Education:
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics

    -MS degree preferred
     
    Job Number: 7003433
    Job Location: Canoga Park, CA
    Rate: 45
    Duration: 6+ Months Possible Direct
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: A.J. Schweiger
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Engineer III / Sensors

    Description:
    Sr. Engineer III / Sensors

    Location: Canoga Park, CA
    Pay Rate: DOE ($35/hr - $45/hr)
    Duration: 6+ month contract
    Shift: Regular 40 hour week, OT possible

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    ** Candidates must have experience with designing and developing sensors (temperature, pressure, speed, displacement, position, flow, vibration, etc.)

    Duties:
    -Design and development of flight and ground test instrumentation (temperature, pressure, speed, vibration and position sensor) to be used in liquid propulsion engine systems.
    -Coordination of activities including hardware fabrication support with other internal organizations such as component engineering, manufacturing, quality, and test.
    -Perform instrumentation test data processing and analysis as required in support of liquid rocket engine hot-fire testing and/or component testing

    Skills: (Required):
    - 7+ years of Instrumentation design/development experience in sensor development including temperature, pressure, speed, displacement, position, flow and vibration sensors.
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics

    Desired:
    -Excellent oral and written communication skills
    -Strong troubleshooting and problem solving skills
    -Familiarity with data acquisition systems, data processing and signal conditioning

    Education:
    -BS degree in Electrical, Mechanical, Aerospace engineering or Physics
    -MS degree preferred
     
    Job Number: 7272
    Job Location: Canoga Park, CA
    Rate: 35.00-45.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Mechanical Engineer

    Description:
    •Maintain BOMS or other engineering data for complex fuel and/or hydraulic system installations.
    •Interface with Suppliers and support supplier requirements analysis and requirement gap analysis
    •Maintain Interface Control Document (ICD) between equipment hardware and aircraft
    •Additional responsibilities may include generation of preliminary design schematics, performing requirement gap analyses of existing hardware and components.
    •Support generation of verification and test plans.
    •This position will support through the program’s PDR and may be extended through CDR

    Required Qualifications:
    •Bachelor of Science degree in Mechanical or Aerospace Engineering or equivalent.
    •5+ years post graduate engineering experience.
    •Due to export compliance, must be a U.S. Citizen or lawful U.S. Permanent Resident.
    •Excellent verbal and written communication skills.
    •Must have demonstrated ability to organize and present engineering information, such as Bills of Material, preliminary design schematics, and requirement gap analyses

    Desired Qualifications:
    •Master of Science degree in Mechanical, Aerospace Engineering or related discipline.
    •Experience in design and selection of aerospace components.
    •Knowledge of ProEngineer/Creo.
    •Experience in writing test plans, procedures and reports.
     
    Job Number: 51710
    Job Location: Davenport, IA
    Rate: 45-62
    Per Diem: Split
    Overtime: possible
    Duration: 6 Mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Cynthia Lashley
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Systems Engineer NY

    Description:
    Job Title: Sr Systems Engineer
    Job Number: 159013/4586
    Location: East Aurora, NY
    Compensation: 61/hr max
    Assignment Length: 6 month contract

    Description:

    The Sr. System Engineer has substantial control over the effectiveness of the overall technical solution (architecture, interfaces and control algorithms) developed to support the customers needs. Major responsibilities can include: Definition and management of system requirements, building physics based models of the system and exercising the models over the entire operational environment, facilitating the other design functions thru the decomposition and allocation of requirements and support the integration and test of the resulting system. The Senior System Engineer will guide the system development through their knowledge of the system as a whole, its operational objectives, the subsystem operation and interfaces, and the technical, financial and schedule constraints.
    Accountabilities
    System Design
    1 Lead the functional analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. Effectively communication these internal design requirement to the other members of the design/project team.
    2 Create system level models, design tools and simulations necessary to support trade studies and solution architectures with customers during early business development efforts.
    3 Lead the identification and definition of all Verification and Validation approaches for the system or subsystem.
    4 Lead the development of subsystem level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
    5 Lead system or subsystem level integration and test, including any anomaly investigations.
    6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.
    Project Management
    1 Manage cost accounts as a Cost Account Manager (CAM) or Work Package Manager (WPM) for the system engineering portion of the design tasks. This includes multiple work packages and management to technical requirements, budget allocation and schedule allocation.
    Engineering Leadership
    1 Represent Moog in a manner consistent with its strong technical reputation.
    2 Operate as a contributing or lead member of in a team of creative, independent individuals.
    3 Maintain and update modeling, sizing and simulation tools required to support each of the business units.
    4 Contribute and participate in training seminars on key technologies and design methods for fellow Moog engineers.


    Qualifications
    • Bachelor of Science or Masters of Science Degree in Electrical, Mechanical, Software or Systems Engineering
    • 10 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
    • Proven general capabilities/competencies in Building Strategic Working Relationships, Planning and Organizing, Customer Focus.
    • Proven specific capabilities/competencies in Requirements Management, Verification and Validation Methods, Control System Design, Integration and Test.
    Essential job functions:
    Required skills:
    Scope:
    Education: - Master's in Computer Engineering or related field is desired.
    - Bachelor's Degree + Experience is acceptable
    - The person should also be capable of being trained and be eager to learn
     
    Job Number: MB-4586
    Job Location: East Aurora, NY
    Rate: 61/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineer

    Description:
    Seeking a Engineer Structural 4/5 for an opening in Melbourne, FL.

    **Must have Active Secret Clearance to start**

    RESPONSIBILITIES:
    Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.

    REQUIRED EXPERIENCE:
    Dynamics Engineer 5 (1 position)
    -Primary responsibilities include dynamics related support of structural and subsystem design and testing.
    -Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation.
    -The work will include building dynamic models, and conducting static and dynamic analyses.
    -The work will also include test planning and coordination for ground and subcomponent tests.
    -14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.

    Structural Analysis Engineer 4 (1 position) -Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
    -Primary responsibilities include support of primarily metallic subsystem and secondary structure design.
    -9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.

    EDUCATION:
    Bachelors in Science

    WORK HOURS:
    Shift: 1st Shift - 9/80

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 162893
    Job Location: Melbourne, FL
    Rate: $55-$80
    Duration: 9-12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineer

    Description:
    Structural Engineer

    Location: Jupiter, FL
    Rate: $70.00 - $75.00/HR
    1 year contract


    ** Candidates must either have an Active Secret clearance or have had a Secret clearance in the last two years.**

    ** Candidates must be U.S. Citizens **
    ** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **

    ** Candidates must have experience with ANSYS **

    - Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
    - Perform structural analyses utilizing classic hand-calculation methods and finite element models.
    - Construct and solve static and dynamic finite element models with ANSYS.
    - Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
    - Interpret analytical results, assess design margins and prepare technical reports.

    Skills:
    Required:
    - This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis.
    - Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
    - Proficiency using finite element analysis tools such as ANSYS is required.
    - Must have the ability to read and interpret engineering drawings.
    - Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

    Desired:
    - 10 years combined education/experience and experience with aerospace product development efforts is desired.
    - Experience interfacing with structural dynamics and using system model results is beneficial.
    - Experience with static and rotating (turbines, pumps etc) structures is a plus.

    Keywords:
    - Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

    Education:
    - This position requires a BS in Mechanical Engineering or Engineering Mechanics.
     
    Job Number: 7199
    Job Location: Jupiter, FL
    Rate: $70.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer with active secret / ANSYS required FL URGENT URGENT

    Description:
    Job Title: Structural Engineer
    Job Number: 159123/6808601
    Location: Jupiter, FL
    Compensation: 75/hr
    Assignment Length: 12 month contract
    Active secret clearance or active within the last two years is REQUIRED
    Candidates must be experienced with Ansys as their primary FEA tool.

    Candidates needed! Please note that this is not a design role. Candidates should have experience focusing on structural analysis and ANSYS rather than design. Thanks!



    Description:

    ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
    . Active secret clearance or active within the last two years is REQUIRED

    ** Candidates must be U.S. Citizens **


    ** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **







    Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
    Perform structural analyses utilizing classic hand-calculation methods and finite element models.
    Construct and solve static and dynamic finite element models with ANSYS.
    Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
    Interpret analytical results, assess design margins and prepare technical reports.
    Skills:
    Required:

    This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis. Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
    Proficiency using finite element analysis tools such as ANSYS is required.
    Must have the ability to read and interpret engineering drawings.
    Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


    Desired:

    10 years combined education/experience and experience with aerospace product development efforts is desired.
    Experience interfacing with structural dynamics and using system model results is beneficial.



    Keywords:

    Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

    Education:
    This position requires a BS in Mechanical Engineering or Engineering Mechanics
     
    Job Number: MB-6808601
    Job Location: Jupiter, FL
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineers (Level 3) - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Structural Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Duties:

    • Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs
    • Analyzes damage tolerance, durability, design allowables and structural modeling
    • Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis
    • Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications

    Qualifications:

    • Mid-level Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue
    • Primary responsibilities include support of primarily metallic subsystem and secondary structure design
    • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD
    • All positions Require an active DoD Secret clearance

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38298
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineers (Level 4 & 5) - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Structural Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Duties:

    • Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs
    • Analyzes damage tolerance, durability, design allowables and structural modeling
    • Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis
    • Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications

    Qualifications:

    • Level 5:
    o Primary responsibilities include dynamics related support of structural and subsystem design and testing
    o Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation
    o The work will include building dynamic models, and conducting static and dynamic analyses
    o The work will also include test planning and coordination for ground and subcomponent tests
    o 14 Years’ with Bachelors in Science; 12 Years’ with Masters; 9 Years with PhD
    • Level 4:
    o Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue
    o Primary responsibilities include support of primarily metallic subsystem and secondary structure design
    o 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
    • All positions Require an active DoD Secret clearance

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38299
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    Structural/Mechanical Design Engineer

    Description:
    CATIA V5 experience
     
    Job Location: Dallas, TX
    Duration: 50/hr
    Input Date: 11/23/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Michael Geil
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Email: mgeil@jsginc.com
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structure MRB Engineer

    Description:
    Structures MRB Engineer
    Gulfstream
    Savannah, GA
    Rate: $62.00-$68.00/HR
    Long Term contract

    Unique Skills:
    - Bachelors degree in aerospace or mechanical engineering
    - Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
    - Experience should include creation of engineering dispositions for nonconformance’s for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
    – Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7219
    Job Location: Savannah, GA
    Rate: $62-$68
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures Flight Test Engineer - RM

    Description:
    Johnson Service Group is seeking a Structures Flight Test Engineer for a 15+ month contract position in West Palm, FL!

    No corp to corp or H1B sponsorship.

    Requirements;
    Purpose: Test planning function, conduct and report helicopter flight tests in structures and dynamics.

    Competencies

    Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
    Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
    Large volumes of gathered flight data are processed and analyzed.
    Certification and/or qualification tests are summarized in reports.
    Bachelor's in Aerospace or Mechanical Engineering as a minimum
    Candidate must have flight test or aerospace design experience
    Rotary wing experience preferred.
    Min 8 years of experience + collage degree
     
    Job Number: 356486
    Job Location: West Palm Beach, CA
    Rate: $65
    Per Diem: yes
    Overtime: yes
    Duration: 15 months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures MRB Engineer

    Description:
    Unique Skills:
    - Bachelors degree in aerospace or mechanical engineering
    - Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
    - Extensive composite lay-up and fabrication experience preferred
    - Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written / verbal communication and interpersonal skills.
    - Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
     
    Job Number: 24-162
    Job Location: Savannah, GA
    Rate: $62 - $68
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Engineering DMSMS

    Description:
    JSG is seeking an System Engineering DMSMS for a 15 months contract opportunity in Stratford, CT!

    ITAR compliant company.

    Description:

    BS, Electrical/Mechanical Engineering

    MS, Electrical/Mechanical Engineering

    Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM, or as a DMSMS/Obsolescence Technical Engineer.
    Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS
    Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
    Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.
    Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
    Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.
    Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, root cause analysis.
    Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
     
    Job Number: 357121
    Job Location: Stratford, CT
    Rate: $38hr
    Per Diem: yes
    Overtime: yes
    Duration: 15 months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Integration/Test Engineer - Level 2

    Description:
    System Integration/Test Engineer - Level 2

    Location: Lexington, KY
    Pay Rate: DOE ($25/hr - $39/hr)
    Duration: 6 month contract
    Shift: First, 5/40
    Travel: Limited/occasional travel to CONUS customer field
    *Must have an ACTIVE SECRET CLEARANCE*

    Description
    -Company is seeking a systems engineer (SE) to perform integration and test (I&T) activities in support of the Special Operations Forces Support Activity (SOFSA) Program.
    -As an SE I&T team member, you will work as part of an engineering team based in Lexington, KY.
    -This program is critical to the success of US service men and women deployed throughout the world.
    -Our mission is to rapidly and properly equip the Company community and its war fighters with the best possible systems and equipment anywhere in the world.
    -The team is focused mainly on modifying existing aircraft and integrating modified components (primarily electrical and mechanical) into various platforms based on customer specifications.
    -The SE I&T Engineer will initially support the rotary mission area, but may occasionally support the fixed wing mission area, as required.
    -The SE I&T Engineer will support the engineering team during design, integration, verification, ground and flight test, and customer support phases of the program.
    -The SE I&T Engineer will develop and present I&T information for internal/external program reviews.
    -The SE I&T Engineer will interface with engineering management, program management, customer I&T points of contact, and other internal organizations to ensure that necessary equipment, facilities, and resources are available to support I&T activities.
    -I&T tasks include test planning and coordination, development of test plans, development of detailed test and demonstration procedures, demonstration and test execution, daily communication of progress to program leadership, integration issue identification and troubleshooting, demonstration/test result evaluation, and documentation of demonstration/test results.

    Skill/Experience/Education (Mandatory):
    • Proficient in generating I&T work products (Master Test Plan, Demonstration/Test Plans and Procedures, Reports, etc.)
    • Experience with planning, coordinating, and executing electronics and mechanical I&T
    • Experience in evaluating and documenting I&T results
    • Experience with presenting I&T information to internal and external team members
    • Familiar with trouble shooting and resolving issues that can arise during I&T activities
    • Familiar with Systems Engineering and Design processes
    • Proficient with Microsoft Office products
    • Ability to travel to perform I&T efforts
    • BS in Electrical Engineering, Mechanical Engineering, or Aeronautical Engineering Preferred

    Desired:
    • Experience with Faro laser or equivalent equipment use for mechanical alignment
    • Experience with CAM2 Measure and/or Verisurf software packages
    • Experience with data collection systems and Instrumentation
    • Experience with RF systems I&T
    • Familiarity with rapid response programs
    • Experience with the coordination, planning and execution of integration and ground/flight test activities
    • Experience in testing US military products and familiarity with military specs and standards
    • Experience in leading and supporting failure analysis and corrective action activities
    • Experience in working programs from concept, development, integration, test, and into production
     
    Job Number: 7221
    Job Location: Lexington, KY
    Rate: 25-39
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Level Integration and Verification Testing - 7 openings CA

    Description:
    Job Title: Engineer III
    Job Number: 159007/3947
    Location: Irvine
    Compensation: 45/hr
    Assignment Length: 6 month contract

    Description:

    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc.).

    1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
    2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.
    3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.
    4. General knowledge of other related engineering and technical areas.
    5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    ? Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
    ? Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
    ? Perform System level Integration and Verification Testing

    Key Skills / Qualifications:
    1. Bachelor’s degree in Mechanical, aerospace or electrical engineering or a related technical discipline. Demonstrated ability to perform the essential functions of the job typically acquired through 3 or more years of related experience.
    2. Experience with flight control system integration and verification activities; including requirement reviews, test procedure development, automated test script development, test planning/execution and test reporting.
    3. Familiar with test automation tools, processes, procedures and standards (DO-178, ARP4754) to support integration and verification activities.
    4. Familiar with System and LRU troubleshooting and root cause analysis.
    5. Strong communication and interpersonal skills required to coordinate cross functional activities to achieve common goals.

    Key responsibilities:
    1. Supporting development of Flight Control System Integration and Verification tests; including development of functional and requirement based test procedures, generation and debug of test and post processing scripts.
    2. Supporting execution of Flight Control system Integration and Verification tests to support commercial aircraft SOF and certification, including conducting informal (dry-run) and formal test executions, test reporting generation and test failure dispositions.
    3. *** Candidate may be required to support shift hours outside of traditional 1st shift hours as assigned. *** Including 3rd shift**
    4. Support test failure investigation and problem reporting activities and process.
    5. Support requirement development and validation, including review requirements maturity, allocation to appropriate means of verification and compliance
     
    Job Number: JK-3947
    Job Location: Irvine, CA
    Rate: 45/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Avionics Engineer

    Description:
    Description:
    Enea Software & Services, Inc. is seeking a Senior Systems Engineer for avionics systems design, integration, test, and FAA certification. Qualified candidates will join an exciting environment and play an important role in the development of new products for General Aviation. BendixKing provides outstanding opportunities for high-caliber and creative individuals with a passion for General Aviation.
    Responsibilities:
    • Product design, including form factor, architecture, data communications, feature/functionality, user interface, MOPS compliance, etc.
    • Analyze marketing requirements, regulations and system architectures to translate them into system requirements using model based techniques
    • Develop system integration strategies, test and certification plans to assure that operational and functional requirements are met
    • Assist in development and improvement of systems engineering processes for optimal execution
    • Develop work breakdown structures and schedule estimates during project planning phase
    • Research new technologies and techniques, and apply them to product development
    • Is recognized as an emerging technical authority within Systems Engineering and acts as a mentor to others
    Basic Qualifications:
    • Bachelors degree in Engineering
    • At least 6 years systems engineering experience with certified avionics products
    Additional Qualifications:
    • Strong technical design skills and knowledge of relevant technologies
    • Broad knowledge of avionics systems and interfaces with direct application of avionics systems, software, and hardware development processes and standards, including ARP4754, DO-160, and DO-178C and product specific Technical Standard Order(s).
    • Strong General Aviation (Part 23/27) knowledge and experience
    • Passion for General Aviation and product design
    • Strong team player and interpersonal communication skills
    • Strong technical & requirements writing skills
    • Ability to develop and drive consistent and efficient engineering processes.
    • Exposure to model based development and SysML
    • Able to pro-actively drive toward objectives with minimal oversight
    • Experience with complex system integration testing and troubleshooting
    • Possesses a broad understanding of electrical, software, mechanical, and certification principles
    • Experienced with aviation certification (FAA, EASA, etc.)
    • Pilots license preferred
     
    Job Number: WW033017BK
    Job Location: Gilbert, AZ
    Rate: DOE
    Per Diem: DOE
    Overtime: YES
    Duration: 1 YEAR
    Start Date: April 15
    Input Date: 11/14/2020
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Walter Walonoski
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineers - East Aurora, NY

    Description:
    STS AeroStaff Services is currently hiring Systems Engineers for open positions in East Aurora, New York.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    The Sr. System Engineer has substantial control over the effectiveness of the overall technical solution (architecture, interfaces and control algorithms) developed to support the customers’ needs.

    Job Duties:

    • Definition and management of system requirements, building physics based models of the system and exercising the models over the entire operational environment, facilitating the other design functions through the decomposition and allocation of requirements and support the integration and test of the resulting system
    • The Senior System Engineer will guide the system development through their knowledge of the system as a whole, its operational objectives, the subsystem operation and interfaces, and the technical, financial and schedule constraints
    • Lead the functional analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications
    • Effectively communication these internal design requirement to the other members of the design/project team
    • Create system level models, design tools and simulations necessary to support trade studies and solution architectures with customers during early business development efforts
    • Lead the identification and definition of all Verification and Validation approaches for the system or subsystem
    • Lead the development of subsystem level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements
    • Lead system or subsystem level integration and test, including any anomaly investigations
    • Create concise reports and proposal write-ups that describe the design decisions and analysis results
    • Manage cost accounts as a Cost Account Manager (CAM) or Work Package Manager (WPM) for the system engineering portion of the design tasks
    • This includes multiple work packages and management to technical requirements, budget allocation and schedule allocation
    • Represent client in a manner consistent with its strong technical reputation
    • Operate as a contributing or lead member of in a team of creative, independent individuals
    • Maintain and update modeling, sizing and simulation tools required to support each of the business units
    • Contribute and participate in training seminars on key technologies and design methods for fellow client engineers

    Qualifications:

    • Bachelor of Science or Masters of Science Degree in Electrical, Mechanical, Software or Systems Engineering
    • 10 years’ of progressive experience in the field of Engineering is preferred
    • Equivalent years’ of experience outside of client will be considered
    • Proven general capabilities/competencies in Building Strategic Working Relationships, Planning and Organizing, Customer Focus
    • Proven specific capabilities/competencies in Requirements Management, Verification and Validation Methods, Control System Design, Integration and Test

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38247
    Job Location: East Aurora, NY
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Test Engineers (Level 1, 2, & 3) - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Systems Test Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Duties:

    • Develops and publishes Integrated Test Plan, detailed test plans, test schedules, and test procedures for developmental testing
    • Provides laboratory support for integration testing
    • Supports and hosts test planning working groups
    • Interfaces with test article design and analysis teams to define test configuration and data requirements
    • Reviews and evaluates test requirements to ensure completeness of test program
    • Performs technical analysis of complete systems and prepares comprehensive system level evaluations
    • Supports test card development and review in collaboration with other engineering disciplines and test operations personnel
    • Supports test readiness reviews, and pre/post-test briefings
    • Provides mission control room support and makes real-time decisions regarding safety, efficiency, and effectiveness
    • Conducts and contributes to pre and post-test data analyses to support anomaly identification and resolution
    • Maintains metrics on status of testing and constraints

    Basic Qualifications:

    • This position requires outstanding written and oral communications skills
    • Individual will be required to serve as either a principal subject matter focal point between maintenance, design engineering, and test site team - contractor and customer
    • Individual must be able to work under only general direction to determine and develop approaches to solutions
    • Must be able to work both within a team environment and independently
    • Must be self-motivated, thorough, and detailed; and must be willing to learn additional engineering discipline areas
    • Proficient in Microsoft Office and Integrated Analysis & Data System (IADS)
    • Overtime, odd shifts, and weekend work will occasionally be required.
    • Level 1: 0 Years’ with Bachelors in Science, Technology, Engineering or Math (STEM Degree)
    • Level 2: 2 Years’ with Bachelors in Science, Technology, Engineering or Math (STEM Degree); 0 Years’ with Master’s Mechanical Engineering
    • Level 3: 5 Years’ with Bachelors in Science, Technology, Engineering or Math (STEM Degree); 3 Years’ with Masters; 0 Years with PhD
    • All Positions require an Active Secret Clearance

    Preferred Qualifications:

    • In depth knowledge of or test experience, to include control room monitoring, in one of the following disciplines: Mission Systems or Vehicle Subsystems

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38294
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Designer 3

    Description:
    Job Description:

    Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition.
    Prepares design layouts and modifies existing designs to satisfy customer and production requirements.
    Assists in the development of product definition based on applicable standards, requirements and design parameters.
    Develops statements of work, including design requirements, cost and schedule estimates.
    Coordinates and develops work transfer packages.
    Contributes to the integration of product definition across internal and external business partners to provide a functional end-product.
    Investigates and resolves moderately-complex manufacturing process or engineering related issues.
    Verifies accuracy of non-technical data produced by others.
    Supports development of new processes by providing input on detailed aspects of the process.
    Mentors less experienced personnel. Works under general direction.
    Skills : Technical Design, AutoCAD and Catia experience

    Education / Experience: AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: 37578
    Job Location: Hill AFB, UT
    Rate: 36-40
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Michelle Fox
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Designer III (UT)

    Description:
    Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

    Skills: Technical Design, AutoCAD and Catia experience

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    We also offer full medical, dental, vision, and 401k, and per diem if you qualify.
     
    Job Number: DesignIIIut
    Job Location: Hill AFB, UT
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer - Level 3

    Description:
    Test Engineer - Level 3

    Location: Orlando, FL
    Pay Rate: DOE ($55/hr - $60/hr)
    Duration: 1 year contract
    Shift: First
    *Must be a U.S. Citizen*
    *Must have an ACTIVE Secret Clearance*

    Job Description:
    -Engineer will be responsible for implementing cyber security controls on the F/A-18 IRST Test Equipment.
    -There are 109 compensating controls that range from computer controls, to physical access to configuration data management.
    -This engineer will need to work with IT specialists to implement the computer controls on the test stations and then run each test software package with the flight hardware to verify that implementation of these controls did not break the test software.
    -Engineer needs to have a working knowledge of National Instruments TestStand software.
    -Labwindows CVI and Labview experience is a plus.

    Mandatory Skills:
    -Bachelors degree from an accredited college in a related discipline.
    -Minimum 10 years of engineering experience.
    -Requires experience in designing Interface Test Adapters (ITAs), test station and ITA schematic design and layout.
    -Design of Printed Wiring Boards (PWB).
    -Knowledge of Electro-Mechanical and Electro-Optical principles to be applied to Test Station Solutions (6-8 years)
    -Knowledge of electrical engineering principles to be applied to product design (4-5 years)

    Desired Skills:
    -Flight hardware (i.e. the product) design.
    -High-speed communication.
    -Troubleshooting flight hardware.
    -Programming in National Instruments TestStand, LabWindows/CVI and Labview FPGA.
     
    Job Number: 7062
    Job Location: Orlando, FL
    Rate: 55.00-60.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer - Level 3

    Description:
    Test Engineer - Level 3

    Location: Orlando, FL
    Pay Rate: DOE ($50/hr - $56/hr)
    Duration: 1 year contract
    Shift: Second
    *Must be a U.S. citizen*
    *Must have an ACTIVE Secret Clearance*

    Job Description:
    -Designs, develops, and implements testing methods and equipment.
    -Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
    -Provides test area with parameters for sample testing and specifies tests to be performed.
    -Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements.
    -Responsible for test integration in the test area.
    -Contributes to the completion of specific programs and projects.
    -Frequent inter-organizational and outside customer contacts.
    -Represents the organization in providing solutions to difficult technical issues associated with specific projects.
    -Provides technical solutions to a wide range of difficult problems.
    -Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.

    Mandatory Skills:
    -Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree.
    -Considered career, or journey, level.
    -Must have experience in NI Windows CVI and LabView.
    -Knowledge of Electro-Mechanical and Electro-Optical principles to be applied to Test Station Solutions (0-3 years)

    Desired Skills:
    -The desired candidate will be familiar with the recurring test engineering support of multiple mixed signal, electro-mechanical and electro-optical test stations as well have solid technical leadership skills.
    -Lead a small team in technical solutions and brief management (0-3 years)
     
    Job Number: 7063
    Job Location: Orlando, FL
    Rate: 56.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Thermodynamics analyst for Advanced Development Program with active secret CA

    Description:
    Lockheed Martin Aero 0393
    Recruiter to Contact:
    Job Title: Mechanical Engineer
    Job Number: 158232
    Location: Palmdale, CA
    Compensation: 45-55/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:Circle A, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt


    Description:

    Description
    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management
    systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

    Skill/Experience/Education
    Mandatory:

    -Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc.

    -Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS).

    -Leadership experience.

    -Experience creating presentation material using MS Power Point and delivering presentations.

    Desired:

    -Leadership experience.

    -Experience creating presentation material using MS Power Point and delivering presentations.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)

    Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 11 Years + Yes
    ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 11 Years + Yes
    Leadership Experience leading teams. 0-3 Years No
    Presentations Experience preparing and delivering Power Point presentations. 4-5 Years No
     
    Job Number: DW-0393
    Job Location: Palmdale, CA
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Thermodynamics analyst with active secret / Sinda/Fluint and Thermal Desktop CA

    Description:
    Job Title: Mechanical Engineer
    Job Number: 158340/0397
    Location: Palmdale, CA
    Compensation: 45-55/hr
    Assignment Length: 11 month contract
    Security Clearance Secret (Prime Contract:Circle A, Can start w/o clearance:No, Interim Clearance Sufficient:No)

    Description:


    Description
    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management
    systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

    Skill/Experience/Education
    Mandatory:

    -Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc
    Desired:

    Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems

    -Experience creating presentation material using MS Power Point and delivering presentations.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)

    Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 6-8 Years Yes
    ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 6-8 Years
     
    Job Number: DW-0397
    Job Location: Palmdale, CA
    Rate: 45-55/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Thermodynamics analyst with active secret / Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer CA

    Description:
    Job Title: Mechanical Engineer
    Job Number: 159157/0430
    Location: Palmdale, CA
    Compensation: 75/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:Circle A, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non Exempt

    Description:


    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform Environmental Control System (ECS) and Thermal Management System (TMS) analysis.


    Skill/Experience/Education
    Mandatory:

    Experience designing and analyzing vehicle Thermal Management Systems ;Secret Clearance with investigation within the past five years.

    Desired:

    Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems;-Experience creating presentation material using MS Power Point and delivering presentations. .

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)

    Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 6-8 Years No
    ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 6-8 Years No
    TMS Analysis Experience developing and analyzing vehicle Thermal Management Systems (TMS) including ECS, Fuel, Hydraulic, and Electrical Power Systems. 6-8 Years Yes
     
    Job Number: DW-0430
    Job Location: Palmdale, CA
    Rate: 65-75/hr DOE
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer II

    Description:
    Tool Design Engineer II

    Location: Savannah, GA
    Rate: $55/HR
    Long Term contract

    Unique Skills:

    Life cycle tool design for FAR 145 Repair Station and CATIA V


    Education and Experience Requirements:

    Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

    Position Purpose:
    Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

    Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
     
    Job Number: 7315
    Job Location: Savannah, GA
    Rate: $55.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer II

    Description:
    UNIQUE SKILLS
    Life cycle tool design for FAR 145 Repair Station and CATIA V

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

    POSITION PURPOSE
    Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
    2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
    3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
    4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
    5. Write procedures on use of tools.

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
    3. Assist in formulating Tool Design policies, procedures, and specifications as required.
    4. Perform other duties as required.

    OTHER REQUIREMENTS
    1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T.
    2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
    3. Ability to conceptualize the following with minimal supervision. Assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
     
    Job Number: 17-682-99301
    Job Location: Southeast
    Rate: From $55.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer II

    Description:
    Tool Design Engineer II

    Location: Savannah, GA
    Rate: $55.00/HR
    Long Term contract
    4x10


    Education and Experience Requirements:
    - Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    - Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment.
    - Three (3) years Tool Design experience.
    - One (1) year CAD/CATIA experience.


    Position Purpose:
    Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

    Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
     
    Job Number: 6754
    Job Location: Savannah, GA
    Rate: $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer II

    Description:
    Under minimal supervision, design complex tools and equipment used in the manufacturing and support of company products.

    Principal Duties and Responsibilities:

    1. Design and draft tooling and equipment used to manufacture and support of company products.
    2. Perform liaison with Tooling, Engineering and production as required.
    3. Review and check Tool Designs, as required, to ensure conformance to specifications, original intent, proper methods and procedures.
    4. Write procedures on use of tools.

    Additional Functions:

    1. Assist Tool shop as needed, during Periodic and Conformity Inspections.
    2. Assist in formulating Tool Design policies, procedures, and specifications as required.
    3. Perform other duties as required.

    Other Requirements:

    1. Must possess strong drafting, math, and technical writing skills.
    2. Demonstrated knowledge of materials, material strengths and uses, Tooling purchased items, and heat treat methods/specifications of materials.
    3. Ability to conceptualize the following with minimal supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

    Experience/Education Required

    Bachelor�s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD

    Unique skills

  • CATIA V5
  • SmarTeam or Enovia
  • Experience Designing Major Assembly fixtures
     
  • Job Number: 24-160
    Job Location: Savannah, GA
    Rate: 55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Unigraphics Mechanical Systems Design & Analysis Engineer III - MO

    Description:
    Engineer/Scientist 3 assigned to the Support Systems Mechanical Ground Support Equipment Sub Systems Team. The Mechanical Sub Systems Support Equipment (SE) Team is the team within the Support Equipment and Services organization that is responsible and accountable for defining, proposing, developing, delivering, and supporting high quality, affordable SE required at the Organizational and Intermediate maintenance levels to meet our various customer's needs and requirements. This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft. Candidates will be required to apply their knowledge of engineering principles, aircraft systems, aircrew operations, maintenance procedures, and manufacturing operations to define, support and improve system operability with emphasis on affordability. Successful candidates will be expected to learn quickly and become capable of independent function within the team in short order. Candidates will need to have strong Systems Engineering and Project Management skills. This position is a mix of technical project management and managing/overseeing delivery of Support Equipment end items. Candidates will be expected to have strong oral and written communication skills that will enable them to effectively interact with internal and external customers and suppliers as well as team members from multiple disciplines.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Ability to define, specify, & evaluate mechanical ground support equipment requirements & architectures for adherence to company, customer, quality & regulatory requirements. Ability to create and manage schedules, as well as coordinate installation and delivery of equipment. Ability to translate functional requirements into designs/specifications and ultimately into fielded systems. Proficiency in oral and written communication is required. Must be highly motivated, self-starting and comfortable dealing with diverse people and disciplines. Previous experience in a multi-disciplined team environment, and frequent interaction with suppliers and customers is desired. Experience with mechanical ground support equipment and logistics (technical publications, provisioning, spares, etc) is desired.
     
    Job Number: UGMO
    Job Location: Hazelwood, MO
    Rate: up to $47/hour, DOE
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    Back to Advanced Job Search