Job Search Results

788 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/17 Sunday 05:27PM Pacific Time by ContractJobHunter. )

Listings 1 - 788

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
**Secret Clearance** Mechanical Engineer(Thermal Analyst Engineer) in Palmdale, CA #0430AS

Description:
Recruiter to Contact:
Job Title: Mechanical Engineer -N
Job Number: 159157
Location: Palmdale, CA
Compensation: 75/hr W2
Assignment Length: 10 month contract
Security Clearance Secret (Prime Contract: Circle A, Can start w/o clearance: No, Interim Clearance Sufficient: No)
Non Exempt

Description:
Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

Skill/Experience/Education
Mandatory:
-Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc.
Desired:

Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems

-Experience creating presentation material using MS Power Point and delivering presentations.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory (Yes/No)

Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 6-8 Years Yes

ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 6-8 Years
 
Job Number: #0430AS
Job Location: Palmdale, CA
Rate: 75.00/hr W2
Duration: 10 months
Start Date: ASAP
Input Date: 04/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers with Flight Controls Experience

Description:
Perform design of aircraft flight controls systems.
MUST HAVE flight controls experience from a General Aviation OEM:
Cirrus Aircraft
Textron (Cessna/Hawker)
Piper
AND the following would work too:
Gulfstream
Bombardier/Lear
Embraer

MUST BE US PERSONS
Create 3D/2D definition.
CATIA V5 is a MUST.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

MUST BE US PERSONS

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to $65/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2127- INTERIOR COMPLETION DESIGNER - CABINETS - resume - word doc only

Description:
Act as a specialist in a specific system / monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD)

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with a minimum 15+ years relevant experience.

Knowledgeable in 3D design with CATIA V5.

Must have design experience in cabinet assembly design and/or cabinet installation.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred) or Commercial aircraft is required.

Well organized and project oriented.

Good communication skills including good English and French writing and verbal skills is an asset.

A team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.
able to work autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Workday expectations: full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2127
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 8+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2130 - DESIGNERS - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review

Support to IPDT and Suppliers

Work on Trade Studies, test plans, Installation and detail drawings

Support experimental testing and entry into service

University mechanical or civil or aerospace engineering degree

Minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential

Self-motivated person, a team player able to work under pressure and under a minimum of supervision

Read and write in English and have good communication skills.

Being bilingual (French and English) is an asset.
 
Job Number: 2130
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2139 - CONFIGURATION CONTROL - CHANGE MANAGEMENT - Canadian citizens only

Description:
Configuration Management:
- Performs varied duties relating to the development, control and maintenance of new and existing complex engine configurations.
- Coordinates investigations relative to initial change request acceptance.
- Review change requests and verify all generated documents and parts lists that provide the control and traceability of engine configuration.
- Provides initial start-up Bill of Material (BOM) to numerous departments for planning purposes on new engine programs.
- Recommends improvements and provides input in the development of configuration systems and procedures to facilitate use of the defined engine configurations.
- Interact with the Group Leader and Supervisor regarding departmental planning and assigned engine model responsibilities.

Drafting:
- Generates complex engineering drawings and layouts of moderately complex design concepts using a computer aided drafting system (CATIA).
- Provides technical assistance through the detail design phase.
- Provides technical direction to junior draftspersons in preparation of engineering and manufacturing drawings and related documentation.

- College diploma in Engineering Technology, or equivalent with a minimum of 2 years of relevant experience in aerospace.
- Demonstrated leadership, technical writing and problem solving skills.
- General knowledge of construction and function of gas turbine engines.
- Ability to read engineering drawings.
- Knowledge of configuration management systems (CCIS, ERIS, IECS).
- Experience in Operations, Customer Support or Assembly and Test.
- Bilingual (French & English), is an asset.
- Drafting: An extensive knowledge of mechanical drafting, engineering mathematics, geometric tolerancing, manufacturing methods, physics and strength of materials.
- Demonstrated organizational skills, excellent communication skills, and capable of working independently and in a team.
- Experience using CATIA, 2D or 3D or similar.


- Must be a Canadian citizen.
 
Job Number: 2139
Job Location: Montreal, Canada
Rate: $20 to $65 per hour
Per Diem: No PD
Overtime: No OT
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2145 - MRB LIAISON ENGINEER - Word document only please.

Description:
Responsible for providing engineering support to the production operations at the Client Assembly Business Unit (Support various

Client Programs) during the evening shift and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

Have a university degree in Mechanical Engineering.

Have three (3) years or more MRB experience in the Aerospace field.

Have Catia and MRB (Material Review Board) work experience.

Position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

Must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Bilingualism would be an asset.

Evening shift.
 
Job Number: 2145
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/17/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2147 - SAFETY SPECIALIST - FBW - Word document only please.

Description:
Will be part of the CORE R, M&S team, supporting Sustaining Programs, New Development Programs, Fly By Wire RMS certification activities and/or strategic technology programs & advance design. Primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design/sustaining activities.

Will be responsible for all R,M&S deliverables specific to the assigned systems;
Aircraft Functional Hazard Analysis(AFHA),
System Functional Hazard Analysis(SFHA),
Preliminary/Final Aircraft Safety Analysis(PASA/ASA),
Preliminary/Final System Safety Analysis(PSSA/SSA),
Failure Mode Effect Analysis(FMEA),
Fault Tree Analysis (FTA),
Candidate Certification Maintenance Requirements (CCMR),
Common Mode Analysis(CMA),
Particular Risk Analysis (PRA)

Will participate in the system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Clientr, Partner/Supplier, Regulatory and Customer parties.

In your role RMS-MMEL, you will.

Prepare and update Client Manuals within the norms and procedures for MMEL.

Participate in MMEL workshops with all stakeholders, to ensure a successful approval of the MMEL package.

Interface with DADs, System Engineering, Flight Sciences, Flight Operations, Stress as part of the MMEL activity.

Interface with other internal and external customers (e.g. Airworthiness, Certification Authorities, Operators, Product Support.

Respond to comments provided from the authorities.

University degree in electrical/mechanical/software engineering with at least 10 years R,M&S experience.

Strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Have preferably been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Must also show a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Have basic knowledge of MS Office.

Have knowledge of creating Failure Mode Effect Analysis, Fault Tree Tree, the Master Minium Equipment List Analysis and Safety Analysis is required.
 
Job Number: 2147
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2150 - CABINET DESIGNER - Word document only please.

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Bombardier Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026
Support the creation of Interface Control Drawings (ICD)
Report status, identify and mitigate roadblocks
Point of contact on a technical level for designers
Accountable for engineering deliverables and milestones for a group of monuments

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5

Organized and project oriented.

Good communication skills including good English and French are assets

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)
 
Job Number: 2150
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 8+ Mths
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2153 - DESIGN/STRESS SPECIALIST - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions.

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes.

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review.

Support to IPDT and Suppliers.

Work on Trade Studies, test plans, Installation and detail drawings.

Support experimental testing and entry into service.

University mechanical or civil or aerospace engineering degree.

Minimum of 15 years of relevant experience.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Ability to understand complex engineering issues.

Basic knowledge required:
- 3D and MBD creation in CATIA V5
- GD&T and technical drawings
- Certification rules
- Manufacturing requirements

Must be computer literate and familiar with commonly used software (MS Office).

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential.

Are a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Read and write in English and have good communication skills.
Being bilingual (French and English), is an asset.
 
Job Number: 2153
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2161 - ELECTRICAL HARNESS 3D DESIGNER - Word document only please.

Description:
Design and route cable and harnesses inside interior cabinets according to integration instructions and guidance.

Create the harness 3D models to support engineering deliverables (HDR & H3D).

Design per BM, BAPS, RAE documents.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Deliver 3D models on time to meet team%u2019s commitments and program milestones.

Review and approve supplier deliverables.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team's objectives for productivity and quality KPIs.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.

University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 5 years of CATIA V5 Experience in harness routing.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BMS and BAPS.

Have a strong sense of responsibility and have good organizational skills and initiative.

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts

Are comfortable working with the MS Office suite

Bilingual (French/English) have excellent communication skills including the ability to read/ write in both.
 
Job Number: 2161
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Air Systems Engineer-Lead

Description:
Primary Responsibilities:
Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers.
Will be required to thoroughly check drawings for design intent and check Bill of Materials.
Must ensure drawings and deliverables meet the scope and client expectations.
Support procurement activities, including coordination with vendors and vendor drawings review.
Support contractor reviews, and installation planning activities.
Individual will travel globally for machine installation, check out and start up
Candidate will plan the work, and track and report work in progress.
Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate.
 
BS or MS in Mechanical or Chemical Engineering required.
10 to 12 years’ of related experience in the consumer products industry or any related industry is required. Experience with an engineering consulting firm is a plus.
Candidate should possess good experience on air systems, which include high vacuum systems, low vacuum systems, forced air systems, dust collection equipment like bag filters, RACF (reverse air flow cleaning filters), cartridge filters, trim collectors etc., vacuum material handling and vacuum conveying system concepts.
Knowledge of spark suppression and explosion suppression systems is preferred.
Experience on installation and duct traverse flow data collection would be added advantage.
Candidate must be able to calculate air balance, mass balance, line sizing, duct sizing, process vacuum requirements based on functions, and system pressure drop calculations.
Knowledge of international standards such as AMCA, ASHRAE , SMANCA ACGIL are required.
Should be able to select and size the fans, duct, and other air system elements like cyclones, filters etc.
Candidate must possess good communication skills and be able to successfully interact with clients on global projects.
Microsoft Office experience is required.
AutoCAD and SolidWorks experience is preferred.
Domestic and international travel will be required.
 
 
Job Number: 1610057845
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhdvAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers for open positions in Phoenix, AZ

Description:
STS AeroStaff Services is currently hiring Aircraft Maintenance Controllers for open positions in Phoenix, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Monitor maintenance performance of all scheduled aircraft operations
• Report essential information as to the status of operating aircraft
• Coordinate with Dispatch concerning all maintenance irregularities that affect the dispatching of aircraft
• Responsible for the proper administration of MEL/CDL/NAI procedures as established in the Company's General Procedures Manual
• Coordinate with FMU and line maintenance, contract maintenance or on-call maintenance as necessary to ensure mechanical irregularities are corrected in accordance with the procedures established in the Company's General Procedures Manual
• Ensure data in the pilot reports, ferry flights, MISs, SDR/MRs, delays and cancellations, etc., is recorded accurately on the Maintenance Control Logs (Form #MCI)
• Confirm all work performed on Company aircraft is accomplished by qualified, authorized and approved personnel
• Ensure on-the-job training is conducted and documented for Maintenance Controllers
• Perform additional tasks as specified in the CASS/Reliability section of the Company's General Procedures Manual
• Perform other duties as assigned by the Manager of Maintenance Control

Qualifications:

• Hold a Mechanic's Certificate with Airframe and Powerplant ratings OR Three years’ of experience maintaining Bombardier CRJ 700/900's and/or Embraer 170-190 series ERJ's preferred OR Three years’ of FAR Part 121 Maintenance Controller experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38282
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/17/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FypSAAS&URLSource=cjhunter

    Assembler - 2nd shift

    Description:
    PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.
     

     
    Job Number: 1710064335
    Job Location: Lincolnton, NC
    Duration: 6 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Roger Greco
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAeAAO&URLSource=cjhunter

    Assembler Level - 1

    Description:
    PDS Tech, Inc. is seeking a candidate for the Assembler Level -1 for an open position located in Niagara Falls NY.
    Job Description: 
    • Performs a variety of operations to assemble precision electromechanical products such as accelerometers, gyros.
    • Performs tasks such as drilling, reaming, burnishing, and tapping; uses precision measuring instruments to ensure conformance to specified tolerances; disassembles precision assemblies and corrects malfunctions.
    • May assemble and modifies pre-production precision units for engineering personnel as directed.
    • May monitor and verify quality in accordance with statistical process or other control procedures

    Mandatory:
    • High school degree or equivalent
    • Two (2) years experience in using a Microscope to assemble miniature part and or assemblies.
    • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
    • High level of manual dexterity and attention to detail a must
    • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
    • Ability to identify product issues.
    • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
    • Previous experience in miniature precision devices is desirable.
    • Quality control experience desirable.
    • Good oral communication skills and ability to work in a team environment. 
    • Electro-Mechanical Assembler = Accelerometer Assembler  


    Desired:

    • High school degree or equivalent, and Two (2) years experience in miniature part (microscope) assembly
    • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
    • High level of manual dexterity and attention to detail a must.
    • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
    • Ability to identify product issues
    • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
    • Previous experience in miniature precision devices is desirable.
    • Quality control experience desirable.
    • Good oral communication skills and ability to work in a team environment.

     
    Job Number: 1710066563
    Job Location: Niagara Falls, NY
    Duration: 12 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jbIAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembler Positions

    Description:
    We are currently working on a project in the Greensboro area to employ multiple positions for assemblers. If you qualify and are selected for this position you will be provided on-the-job paid training for 6 months and upon successful completion will be offered a direct position.

    In order to qualify you are required to successfully complete the following:
    • Successful completion of work keys - Silver Level (minimum score of 4 on each of the 3 core areas)
    • Successful completion of the Bennett Mechanical Aptitude Test
    • Interview with local management
    • Must have at least 1 year experience in an manufacturing environment
    • Must be able to successfully complete background investigation and drug screen
    • Must have the ability to obtain or possess a current secret clearance prior to start date

    Also accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    If you are interested in this position please follow the link to our webpage where you can apply for this position or email me at sue@moseleytechnical.com.

    https://internal-moseleytechnical.icims.com/jobs/3293/mfg-assoc-ii---mechanical-assm/job?mode=view
    If you can't click on the link you can copy and paste the address in your browser.

    Moseley is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    I look forward to hearing from you!


    Sue Parker
    Account Representative
    Moseley Technical Services, Inc.
    (843) 371-6504 Cell
    (888) 247-8936 E-Fax
     
    Job Number: 3293
    Job Location: Greensboro, NC
    Per Diem: No
    Overtime: Possible
    Duration: temp to hire
    Input Date: 04/18/2017
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Sue
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Assembler- MA

    Description:
    Chipton Ross is seeking an Assembler in Marion, MA

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Mandatory:
    Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

    Desired:
    Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
     
    Job Number: 160418
    Job Location: Marion, MA
    Rate: $15 to $17.00 DOE
    Duration: 1 year
    Input Date: 12/11/2017
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembly Mechanic

    Description:
     Looking for a candidate that has more of a “mechanical” background. This truly is targeting an entry level candidate with a mechanical aptitude (i.e. recently finished, or in process of finishing, trade school. Perhaps high school graduate with mechanical interest).
     There should also be a general understanding of blueprints

    Summary

    To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

    Responsibilities:

    > Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
    > Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
    > Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
    > Resolves manufacturing problems.
    > Maintains good housekeeping, safety standards, and calibration requirements.
    > May set up production equipment.
    > Practices Total Quality principles and concepts.

    Qualifications:

    > Entry level position with little or no experience required. High school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
    > Specialized and extensive experience in mechanical assembly techniques.
    > Military and commercial quality specifications.
    > Manufacturing policies and procedures.
    > Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
    > Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
    > Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
    > Knowledge of shop math and ability to apply math skills.
    > Electrostatic discharge procedures and methods.
    > Ability to work well with others employing team principles.
    > Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
    > All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
    > Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


    Mark A Ludwig
    Vice President / Sr. Account Executive
    Global American Staffing
    Email: mludwig@globalams.us
    Direct: (508) 434 – 6180
    Office: (508) 230 – 5030 x123
    www.globalamericanstaffing.com
     
    Job Number: 014_2017
    Job Location: Cockeysville, MD
    Rate: DOE
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 07/21/2017
    Firm Name: GLOBAL AMERICAN STAFFING
    Attention: Mark A Ludwig
    Address: 12 HARDING ST STE 204-205
    City, State: LAKEVILLE, MA 02347
    Phone: 508/230-5030
    800 Phone: 800/510-8050
    Fax Phone: 508/923-0005
    Website: www.globalamericanstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Associate Engineer

    Description:
    Associate Engineer
    Buffalo, NY
    1 year contract


    **This is a great opportunity for an ENTRY-LEVEL candidate!**

    The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment. Our client's products generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Associate Engineer will operate as part of a design/development team, which includes other Department engineers. The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments.

    In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort. For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level.

    To be considered for the position of Associate Engineer, a candidate should have a minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering. To fulfill the demands of design and development of new products the individual must show self starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques. A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable.


    Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering.
     
    Job Number: 51697
    Job Location: Buffalo, NY
    Rate: 25.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: 4/17/17
    Input Date: 04/07/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Associate Engineers - East Aurora, NY

    Description:
    STS AeroStaff Services is currently hiring Associate Engineers for open positions in East Aurora, New York.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment
    • The Associate Engineer will operate as part of a design/development team, which includes other Department engineers
    • The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments
    • In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal
    • This phase is critical in that it establishes the basis for future design, and for contract negotiations
    • Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort
    • For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level

    Qualifications:

    • This could be a great opportunity for a recent graduate
    • Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering
    • Must show self-starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques
    • A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38203
    Job Location: East Aurora, NY
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/07/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

    We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

    Essential Functions:

    Coordinate system test and certification requirements.
    Author flight test and ground test specifications.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Prepare test reports.
    Domestic and occasional international travel is required.
    Desired Qualifications:

    5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
    Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
    Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
    Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: Full time and LT
    Start Date: ASAP
    Input Date: 08/04/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CREO / NX Mechanical Design Engineer

    Description:
    A Leading Aerospace company, located in Redmond, WA, is seeking a CREO/NX Mechanical Design Engineer III for a 12+ month contract role.

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:

    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

    Skills:

    Required:
    -Proficient experience using NX or CREO CAD System.
    -Proficient with Teamcenter or Windchill PLM System.
    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    -Excellent experience in the creation of mechanical hardware.
    -9+ Years of related Aerospace Industry experience.

    Desired:
    -A strong mechanical aptitude and experience with CAD software tools is desired.
    -Proficiency with Microsoft Office products (Word, Excel and PowerPoint).
    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
    -Active secret clearance is desired, not required.

    Education:
    -Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.
    -An advanced engineering degree is a plus.
     
    Job Number: 12102
    Job Location: Redmond, WA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 1 Year+
    Start Date: ASAP
    Input Date: 04/18/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CREO Mechanical Design Engineer

    Description:
    A Leading Aerospace company, located in Canoga Park, CA, is seeking a CREO Mechanical Design Engineer III for a 12+ month contract role.

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:

    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

    Skills:

    Required:
    -Proficient experience using CREO CAD System and Windchill PLM System.
    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    -Excellent experience in the creation of mechanical hardware.
    -9+ Years of related Aerospace Industry experience.

    Desired:
    -A strong mechanical aptitude and experience with CAD software tools is desired.
    -A proficiency with Microsoft Office products (Word, Excel and PowerPoint).
    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
    -Active secret clearance is desired, not required.

    Education:
    -Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
    -An advanced engineering degree is a plus.
     
    Job Number: 12101
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 1 Year+
    Start Date: ASAP
    Input Date: 04/18/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CREO Mechanical Design Engineer III

    Description:
    Creo Mechanical Design Engineer III
    Canoga Park, CA
    1 Year Contract
    $40.00-47.00/Hr

    Duties:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

    Skills:
    Required:

    -Proficient experience using CREO CAD System and Windchill PLM System.

    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

    -Excellent experience in the creation of mechanical hardware.

    -9+ Years of related Aerospace Industry experience.

    Desired:

    -A strong mechanical aptitude and experience with CAD software tools is desired.

    -A proficiency with Microsoft Office products (Word, Excel and PowerPoint).

    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

    -Active secret clearance is desired, not required.

    Education:
    -Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.

    -An advanced engineering degree is a plus.
     
    Job Number: 7329
    Job Location: Canoga Park, CA
    Rate: 40.00-47.00/Hr
    Per Diem: Possible Split
    Overtime: Possible
    Duration: 1 Year
    Start Date: ASAP
    Input Date: 04/26/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Catia V5 Design Checker

    Description:
    1. CATIA Knowledgeware and SmarTeam experience desirable.
    2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
    4. Experience with mechanical assemblies and manufacturing technique design.
    5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
    6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
    7. Use of Microsoft Word, Excel and Power Point for creation of reports.
     
    Job Number: 24-171
    Job Location: Savannah, GA
    Rate: $50-$55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 yr+
    Start Date: ASAP
    Input Date: 09/01/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Certification Expert - Fire Protection

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a Certification Expert for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    The Engineer will work and lead activities of Fire Protection System (FPS) Team reporting to the CM in this role.
    Within the airworthiness tasks, the demonstration of compliance process includes the Independent Checking of the Demonstration of Compliance of documents produced by the Design Organization, which need airworthiness release. The independent checking is performed by the Compliance Verification Engineer (CVE).
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053086
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiiAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineer

    Description:
    Completions Mechanical Engineer

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    - CATIA V5 and SmarTeam experience required
    - Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
    - Company Aircraft experience preferred

    Position Purpose:
    -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities/Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education:
    -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 7299
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III

    Description:
    Component Product Engineer II/III

    Location: Canoga Park, CA
    Pay Rate: DOE ($42/hr - $48/hr)
    Duration: 6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
    ** This is not a designer role **

    Duties:
    -Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
    -Candidates should have at least 3 years of related work experience.

    Skills:
    • 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
    • 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
    • 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    • 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
    • 10%: Supplier integration with external vendors
    • 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

    Education:
    • A Bachelor's degree in Mechanical or Aerospace Engineering.
     
    Job Number: 7164
    Job Location: Canoga Park, CA
    Rate: DOE
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 04/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III NOT a Designer role / local candidates only! CA

    Description:
    Job Title: Component Product Engineer II/III
    Keywords:
    Number of Positions: 3

    Remaining Positions: 2

    Duties:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Additional Information: Manager has decided that she only wants to see local candidates at this time.

    ** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **



    Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
    Candidates should have at least 3 years of related work experience.
    Skills:
    25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
    25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
    20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    10%: Develops trade studies, design concepts, systems integration and component-level test plans.
    10%: Supplier integration with external vendors
    10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    Education:
    A Bachelor's degree in Mechanical or Aerospace Engineering.

    State/Province: California
    City/Town: Canoga Park
    Address: 8900 Desoto Ave

    Start Date: 04/03/2017 Hours Per Week: 40.00
    Est. End Date: 10/01/2017 Hours Per Day: 8.00
    Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
     
    Job Number: MB-6804757
    Job Location: Canoga Park, CA
    Rate: 48/hr max
    Duration: 6 month contract
    Input Date: 04/24/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo Mechanical Design Engineer III CA

    Description:
    Job Title: Creo Mechanical Design Engineer III
    Job Number: 159203/6819537
    Location: Canoga Park, CA
    Compensation: 47/hr
    Assignment Length: 12 month contract

    Description:


    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
    Skills: Required:
    -Proficient experience using CREO CAD System and Windchill PLM System.
    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    -Excellent experience in the creation of mechanical hardware.
    -9+ Years of related Aerospace Industry experience.

    Desired:
    -A strong mechanical aptitude and experience with CAD software tools is desired.
    -A proficiency with Microsoft Office products (Word, Excel and PowerPoint).
    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
    -Active secret clearance is desired, not required.

    Keywords:
    Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
    -An advanced engineering degree is a plus.
    # of Positions: 1
     
    Job Number: MB-6819537
    Job Location: Canoga Park, CA
    Rate: 47/hr max
    Duration: 12 month contract
    Input Date: 05/01/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo/NX Mechanical Design Engineer III

    Description:
    Creo/NX Mechanical Design Engineer III
    Redmond, WA
    1 Year Contract
    $40.00-47.00/Hr

    Duties:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.



    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.



    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.



    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

    Skills:
    Required:

    -Proficient experience using NX or CREO CAD System.

    -Proficient with Teamcenter or Windchill PLM System.

    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

    -Excellent experience in the creation of mechanical hardware.

    -9+ Years of related Aerospace Industry experience.



    Desired:

    -A strong mechanical aptitude and experience with CAD software tools is desired.

    -Proficiency with Microsoft Office products (Word, Excel and PowerPoint).

    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

    -Active secret clearance is desired, not required.

    Education:
    -Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.

    -An advanced engineering degree is a plus.
     
    Job Number: 7330
    Job Location: Redmond, WA
    Rate: 40.00-47.00/Hr
    Per Diem: Possible Split
    Overtime: Possible
    Duration: 1 Year
    Start Date: ASAP
    Input Date: 04/26/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo/NX Mechanical Design Engineer III WA

    Description:
    Job Title: Creo/NX Mechanical Design Engineer III
    Job Number: 159202/7006490
    Location: Redmond, WA
    Compensation: 47/hr
    Assignment Length: 12 month contract


    Description:



    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

    20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
    Skills: Required:
    -Proficient experience using NX or CREO CAD System.
    -Proficient with Teamcenter or Windchill PLM System.
    -Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
    -Excellent experience in the creation of mechanical hardware.
    -9+ Years of related Aerospace Industry experience.

    Desired:
    -A strong mechanical aptitude and experience with CAD software tools is desired.
    -Proficiency with Microsoft Office products (Word, Excel and PowerPoint).
    -Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
    -Active secret clearance is desired, not required.
    Keywords:
    Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.
    -An advanced engineering degree is a plus.
    # of Positions: 1
     
    Job Number: MB-7006490
    Job Location: Redmond, WA
    Rate: 47/hr max
    Duration: 12 month contract
    Input Date: 05/01/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DESIGNER / DRAFTER / Solidworks test onsite / local only / Aerospace structures ASME CA

    Description:
    159187
    TITLE: DESIGNER / DRAFTER
    NORTHROP GRUMMAN/ASTRO AEROSPACE
    Carpinteria, CA.
    45/hr max

    Seeking designers and drafters for contract openings at Astro Aerospace.

    We have requirements for 2 to 4 new designers immediately and up to 7 within a few weeks. Currently we are interviewing two people but will have positions for two more. The focus of these designers should have more Drawing and Engineering Change Order experience than Design Engineering Experience.

    Job Description:
    Astro Aerospace, a Strategic Business Unit of Northrop Grumman Aerospace Systems, is currently in search of a Designer 4 to support our deployable space structure programs in Carpinteria, CA.

    S(he) will design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. They will also develop basic data and make preliminary layouts, sketches, and notes necessary to present a design proposal. All will be done in conjunction with other organizations affected by design development.

    Responsibilities
    - Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
    - Create layouts of complex assemblies and detail parts of devices, mechanisms, and structures.
    - Check completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
    - Identify design errors, omissions, and other deficiencies.
    - Recommend revisions and/or improvements in design layout to the responsible engineers or designers.

    Basic Qualifications:
    - An Associate's or other two year technical degree in a related discipline, with six (6) years of related experience in mechanical or electro/drafting with aerospace structures and mechanisms.
    - A minimum of three (3) years of experience using Solidworks and PDMWorks is required.
    - Demonstrated knowledge of manufacturing practices and comprehensive working knowledge of ASME 14.5, ASME Y14.100.
     
    Job Number: MB-001
    Job Location: Carpinteria, CA
    Rate: 45/hr max
    Duration: 6-12 month contract
    Input Date: 06/06/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    DFC Structures Flight Test Engineer

    Description:
    PDS is seeking a EFCS  Engineer for an open position in West Palm Beach, FL


     


    In your role, you will:


    • Test planning function, conduct and report helicopter flight tests in structures and dynamics
      1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
      2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
      3. Large volumes of gathered flight data are processed and analyzed.
      4. Certification and/or qualification tests are summarized in reports.
       

    Education and Experience:
    - Bachelor's in Aerospace or Mechanical Engineering as a minimum
    - Candidate must have flight test or aerospace design experience
    - Rotary wing experience preferred.
     

     
    Job Number: 1610052203
    Job Location: West Palm Beach, FL
    Per Diem: No
    Duration: 24 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001sjdzAAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft System Integration

    Description:
    Aircraft System Integration

    Location: Savannah, GA
    Pay Rate: $50/hr - $55/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    1. CATIA Knowledgeware and SmarTeam experience desirable.
    2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
    4. Experience with mechanical assemblies and manufacturing technique design.
    5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
    6. Use and understanding of Dimensioning and Tolerancing including familiarity w/ ASME Y14.5 required
    7. Use of Microsoft Word, Excel and Power Point for creation of reports.

    Education and Experience Requirements:
    -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -5 yrs in specific technical discipline or 10 yrs broad eng exp in several technical disciplines w/ Bachelors.
    -Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities/Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7302
    Job Location: Savannah, GA
    Rate: 50.00-55.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Analysis Engineer

    Description:
    Seeking a Mechanical Engineer for an opening in Palmdale, CA.
    **Requires active Secret Clearance**

    RESPONSIBILITIES:
    Thermodynamics analyst for Advanced Development Program. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform Environmental Control System (ECS) and Thermal Management System (TMS) analysis.

    REQUIRED EXPERIENCE:
    Experience designing and analyzing vehicle Thermal Management Systems.

    ADDITIONAL EXPERIENCE: REQUIREMENTS:
    Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems;-Experience creating presentation material using MS Power Point and delivering presentations.

    FULL TIME/1ST SHIFT
    9/80 WORK WEEK

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 162850
    Job Location: Palmdale, CA
    Duration: 7 Months
    Start Date: ASAP
    Input Date: 04/12/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer

    Description:
    Design Engineer

    Location: Carlsbad, CA
    Duration: 8-9 months

    Description:
    Experience:
    - Minimum 3 years professional experience in mechanical design, analysis and drafting.
    - Expertise in GD&T per ASME Y14.5-2009
    - Experience in designing plastic parts and tools for plastic parts
    - Experience performing FEA

    Education:
    Bachelor's Degree in Mechanical Engineering.

    Responsibilities include:
    - Product design and development, DFMEA, 3D CAD, Tolerance stack-up, GD&T, and BOM creation.
    - Creation or updates of parts and tools including drawings, CAD models
    - Creating or updating drawings for parts, sub-assemblies, products or test fixtures.
    - Creating or updating bills of materials
    - Creating or updating 3D CAD models
     
    Job Number: 17-07100
    Job Location: Carlsbad, CA
    Per Diem: possible
    Overtime: possible
    Duration: 9 mos
    Start Date: 5/1/17
    Input Date: 04/19/2017
    Firm Name: ICONMA LLC
    Attention: Constance Whitcomb
    Address: 1201 PACIFIC AVE STE 600
    City, State: TACOMA, WA 98402
    Phone: 312/502-4795
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer

    Description:
    Seeking a Design Engineer for an opening in Rancho Cucamonga, CA.

    RESPONSIBILITIES:
    The Design Engineer will work closely with Design Engineering, Certification, Program Management, Quality Assurance, Manufacturing, and Supply Chain.

    -Define and design the product under the responsibility of the Project Engineer/Engineering Manager/Program.
    -Can get the functional lead of Design Engineer under the supervision of his/her Manager.
    -Be responsible of establishment of the whole definition documentary.

    Establish and develop the product definition justification using specific design tools for his/her own work and part of his/her perimeter (CAD, mechanical calculation tools, etc. ...). Some specific tools may be subject specialization of some Design Engineer (eg Tool routing specific cable, ...).
    Communicate to the industrialization on time the necessary information to integrate in the ERP.
    Keep Updated product definition justification.
    Investigate the requests for product evolution overlooked known issues and process these requests (after approval by CCB) Investigate requests changes order for CCB and provide maximum of information. He/she is not within his/her responsibility to approve only the proposed changes.
    Ensure the application of quality processes.
    Realize all necessary controls to validate his/her work and ensure archiving results (T/Sup, calculations, Mom, etc ...).
    Distribute the activity within the functional working group (technical contractor included).
    Ensure overlooked his/her hierarchy the delay, technical and cost target.
    Be able to propose a monitoring and technical summary.
    Propose and generate ideas of design and architecture in offer phase or preliminary conception.
    Establish or organize the part and product detailed design in compliance with the specifications and objectives defined.
    Ensure the design interface with the rest of IPT and external stakeholders.
    Initiate meetings necessary to validate the work. (3d, drawings reviews) Initiate test request. (validation) Track and organize any occasions definition linked to the first steps of the product (FAI monitoring, service return, ...) Maintain in condition and consistency the product definition documentary.
    Follow technological developments and support preliminary studies if necessary (evolution products, anticipation of obsolescence and new regulations).
    Contribute to update the development schedule Report any drift in objectives to Project Engineer and engineering Manager as well as Industrialization manager.
    Participate in Product and or Process FMEA for sub-assemblies.
    Contribute to the development of the Justification of product definition and guarantee the quality of its content in accordance with the Project Engineer.
    Ask internal or external experts support for any activity outside his/her competence (R&T, internal and external suppliers ...) Apply procedures related to its field.
    Participate in progress actions of his/her team, especially design methodology.
    Participate in the training of new arrival.
    Ensure the back-up (replacement) of a person in his/her department

    REQUIRED EXPERIENCE:
    Design skills
    Tolerance stackup
    GD&T
    Proven problem solving skills
    Proficient with MS Office
    Able to multi-task
    Proficient with Catia, Autocad
    Proficient with DocsVision, Smarteam

    Ability to read and review written communication.
    Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
    Must be able to speak publicly and give presentations.

    PHYSICAL DEMANDS:
    This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    EDUCATION:
    High School Diploma

    WORK HOURS:
    Full Time
     
    Job Number: 162813
    Job Location: Rancho Cucamonga, CA
    Rate: $85K
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 04/13/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer ( Independence, Ohio) 8056, landing gears

    Description:
    Design Engineer ( Independence, Ohio) 8056
    12 month contract

    Pay Rate Range - $70+ DOE
    12 month + assignment

    **Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


    Note: minimum of 10 years of experience in Landing Gear design

    Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.

    Basic Qualifications
    • Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development
    • Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies
    • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
    • Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics
    • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
    • Demonstrated ability to work directly with customers and suppliers
    • Understanding of performance based specification requirements, requirements management and verification.
    • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
     
    Job Number: 8056
    Job Location: Independence, OH
    Rate: 70
    Per Diem: yes
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 04/22/2017
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X101
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / Catia V5 PDM / Landing gear experience required / Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts OH

    Description:
    Job Title: Design Engineer
    Job Number: 158840/8056
    Location: Independence, OH
    Compensation: 60-70/hr
    Assignment Length: 12 month contract

    Description:


    Pay Rate Range - $70 DOE

    12 month + assignment

    **Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


    Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.


    • Technical responsibility for all design related tasks of the project while working with the following:

    o Project Head to ensure that design tasks are properly managed to achieve end item deliverables in accordance with project plans

    o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements

    o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust product is developed

    • Executes design activities including:

    o Customer / Suppliers:

    Liaise with customer/Suppliers for all design related issues

    Foster strong customer relationships through accountability, transparency and credibility

    Assist with development and maturation of system procurement specification and statement of work

    o Integration / Planning:

    Responsible and accountable for all design tasks and its completion dates

    Sets design priorities and objectives with a strong drive to meet expectations

    Communicates progress and roadblocks with the Integrated Product Team (IPT) and the Project Head

    o Design Tasks

    Develops, reviews, recommends, coordinates design, design change activity with customer, other Company disciplines including production and manufacturing engineering

    Generates design documentation such as trade studies, tolerance stack-ups, interface agreements, installation and proximity sensing analysis

    Investigates design related issues and develops effective solutions

    Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS-LS Engineering methodologies.

    Generate design layouts, developmental and kinematic assemblies within Catia V5

    Utilize UTAS New Product Introduction tools to facilitate execution for design related tasks as required

    Present designs at internal and external design reviews to ensure the design meets requirements and expectations

    Develop and achieve agreement on Landing Gear interfaces with customers and suppliers.
    o Problem Resolution

    Performs Engineering investigations into failures and participates in Root Cause and Corrective Action

    Ensure timely and satisfactory resolution of problems

    o Compliance

    Ensures compliance to UTAS-LS engineering methodologies by providing direction/guidance to the design team.

    Maintains compliance to ITAR and regulatory requirements

    • Occasional travel between customer/suppliers and UTAS-LS locations.

    • May be asked to complete other tasks based on skills and qualifications

    Basic Qualifications

    • Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development

    • Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies

    • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system

    • Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics

    • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers

    • Demonstrated ability to work directly with customers and suppliers

    • Understanding of performance based specification requirements, requirements management and verification.

    • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)

    • Successful candidates must meet all requirements under ITAR & CCGP

    • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust

    • US citizen, permanent resident alien or able to review all export-controlled technical information.
     
    Job Number: DW-8056
    Job Location: Independence, OH
    Rate: 60-70/hr max
    Duration: 12 month contract
    Input Date: 05/10/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer Checker ( Independence , Ohio) 8033, Catia, Smarteam

    Description:
    Design Engineer Checker ( Independence , Ohio) 8033
    12 month Contract

    Pay Rate - $45 - $55/hour.

    Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
    • Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
    • Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
    • Must be fluent with detailed part and assembly definition (FTA) using Catia V5
    • Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
    o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
    o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
    • Types of hardware include products such as.
    o Hydraulic actuators
    o Oleo-Pneumatic shock struts (single and dual stage)
    o Landing gear assemblies
    o System routings (electrical and hydraulic)
    • The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
    • Product definition includes:
    o Associated parts list
    o Detailed part and assembly definition
    o Tolerance stack-up evaluation
    • Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
    • Support drawing release schedule.
     
    Job Number: 8033
    Job Location: Independence, OH
    Rate: 50
    Per Diem: Yes
    Overtime: Yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 04/22/2017
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X101
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer Checker / Catia V5 / Landing Systems Design OH

    Description:
    8033
    Design Engineer Checker / Catia V5 / Landing Systems Design
    Pay Rate - $45 - $55/hour.

    Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
    • Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
    • Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
    • Must be fluent with detailed part and assembly definition (FTA) using Catia V5
    • Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
    o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
    o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
    • Types of hardware include products such as.
    o Hydraulic actuators
    o Oleo-Pneumatic shock struts (single and dual stage)
    o Landing gear assemblies
    o System routings (electrical and hydraulic)
    • The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
    • Product definition includes:
    o Associated parts list
    o Detailed part and assembly definition
    o Tolerance stack-up evaluation
    • Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
    • Support drawing release schedule.
    • Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
    • Kinematics analysis using Catia V5
    • Weight impact
    • Compliance
    o Ensures compliance to UTAS-LS Engineering methodologies
    o Maintains compliance to ITAR and regulatory requirements
    o Occasional travel between customer/suppliers and UTAS locations.
    • Perform other duties as required

    Basic Qualifications Search BS in Mechanical or Aerospace Engineering
    • Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
    • Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
    • Must be fluent with detailed part and assembly definition (FTA) using Catia V5
    • Working knowledge of materials and surface treatments.
    • Strong communication skills
    • Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
    • Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
    • Landing gear and/or hydraulic actuator design experience.
    • Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
    • Successful candidates must meet all requirements under ITAR & CCGP
    • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
    • US citizen, permanent resident alien or able to review all export-controlled technical information.

    Preferred Qualifications:
    • Demonstrated knowledge of ASME Y14.100 and Y14.41.
    • Landing gear experience.
    • Knowledge of Root Cause Corrective Action.
    • Open minded, pro-active, independent, quick learner with a strong desire to learn.
    • Experience using SMARTeam – PDM
    • Experience using MATRIX ONE – PLM
    Comments
     
    Job Number: DW-8033
    Job Location: Independence, OH
    Rate: 45-55/hr max
    Duration: 12 month contract
    Input Date: 05/10/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Design Engineers

    Description:
    CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

    -Holiday Pay
    -Medical
    -Dental
    -Vision
    -Short-Term Disability
    -Direct Deposit
    -401(k) Immediate Enrollment
    -Annual Bonus
    -Referrals
    -Personal Communications
     
    Input Date: 01/23/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545, 817/354-5555
    800 Phone: 866/758-2494
    Email: resumes@agentetech.com
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineers (Level 1 & 2) - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Duties:

    • Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
    • Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
    • Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
    • Coordinates with other organizations affected by design development
    • Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
    • Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
    • Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers
    • Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design

    Basic Qualifications:

    • Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years
    • Level 1: 0 Years’ with Bachelors in Science Mechanical Engineering
    • Level 2: 2 Years’ with Bachelors in Science Mechanical Engineering; 0 Years’ with Masters Mechanical Engineering
    • Position requires an active DoD Secret clearance

    Preferred Qualifications:

    • Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38295
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/20/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineers (Level 2 & 3 - Mechanical) - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Duties:

    • Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
    • Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
    • Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
    • Coordinates with other organizations affected by design development
    • Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
    • Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
    • Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers

    Qualifications:

    • Develop layouts and PDPs for non-complex mechanical Crew Systems products
    • Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
    • Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
    • Position requires an active DoD Secret clearance

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38303
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/20/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Designer 4 - MS

    Description:
    Chipton-Ross is seeking a Designer 4 for an opening in Pascagoula, MS

    RESPONSIBILITIES:
    Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or AutoCAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.

    Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.

    Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker.

    Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication.

    Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.

    REQUIRED EXPERIENCE:
    High School diploma or equivalent and six (6) years of related design experience or associates degree and three (3) years of related design experience.

    EDUCATION:
    HS/ GED


     
    Job Number: 155940
    Job Location: Pascagoula, MS
    Rate: $40 to $46.00 DOE
    Duration: 1 year
    Input Date: 12/11/2017
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    Designer/Drafter 3

    Description:
    PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
    In your role you will:

    • Completes complex drawings to suit engineering changes and initiates engineering changes.
    • Completes the creation of complex design layout and detail drawings of complex products.
    • Performs compilation of materials and specification sheets.
    • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
    • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
    • Completes complex investigations related to product design and maintenance.
    • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
    • Completes planning test programs.
    • Selects material based on application; may coordinate procurement. 


     
    Skills and requirements: 
    • PTC CREO Elements/Pro 5.0 
    • Pro Sheetmetal, Piping, Cabling, Surfacing 
    • Autocad 2010 
    • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
    • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
    • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
    • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


    Education and Work Experience

    • Bachelor's degree in related field with 2 years experience 
    • Associate Degree in related field with 3 years experience 
    • High School Diploma with 5 years experience 


     
     
    Job Number: 1610055971
    Job Location: Sacramento, CA
    Per Diem: No
    Duration: 6 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FXkOAAW&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Development Test Engineer

    Description:
    Development Test Engineer - Electric Propulsion

    Location: Canoga Park, CA
    Rate: $40.00 - $48.00/HR
    6 month contract position
    Travel: Yes - Will require significant travel to El Segundo, CA and Ann Arbor, MI


    ** MUST be able to obtain a Secret Clearance. An Active Secret is preferred, but NOT required**


    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    Experience/familiarity with the following preferred:
    -Electric Propulsion
    -Vacuum chamber systems and low pressure environments
    -High voltage circuits and electronics
    -Thruster testing or hollow cathode operation
    -Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
    -Plasma interaction with materials
    -Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
    -Understanding of magnetic fields and conductive/radiative heat transfer

    Skills:
    -Test experience
    - Writing test plans
    -Performing test setup
    -Test analysis
    -Basic understanding of facility requirements and test article installation
    -Microsoft Office

    Key Words:
    - Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

    Education:
    - B.S. in Mechanical, Aerospace, Physics, or related field.
     
    Job Number: 7264
    Job Location: Canoga Park, CA
    Rate: $40.00 - $48.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 04/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Development Test Engineer / Electric Propulsion

    Description:
    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    ** An active Secret Clearance is preferred, but NOT required. Only submit candidates with active Secret Clearances if you are able to employ them (have access the JPAS system) **



    ** Will require significant travel to El Segundo, CA and Ann Arbor, MI **





    Experience/familiarity with the following preferred:



    -Electric Propulsion

    -Vacuum chamber systems and low pressure environments
    -High voltage circuits and electronics

    -Thruster testing or hollow cathode operation

    -Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)

    -Plasma interaction with materials

    -Thruster performance characteristics (Thrust, Isp, efficiency, etc.)

    -Understanding of magnetic fields and conductive/radiative heat transfer

    Skills:
    -Test experience

    -Writing test plans

    -Performing test setup

    -Test analysis

    -Basic understanding of facility requirements and test article installation

    -Microsoft Office



    Key Words:

    Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

    Education:
    B.S. in Mechanical, Aerospace, Physics, or related field.
     
    Job Number: 6914524
    Job Location: Canoga Park, CA
    Rate: 48
    Duration: 6+ Months Possible Direct
    Start Date: ASAP
    Input Date: 04/12/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: A.J. Schweiger
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Development Test Engineer / Electric Propulsion

    Description:
    Title: Development Test Engineer - Electric Propulsion
    Location: Canoga Park, CA
    Duration: 6+ months contract

    Experience/familiarity with the following preferred:

    Electric Propulsion
    Vacuum chamber systems and low pressure environments
    High voltage circuits and electronics
    Thruster testing or hollow cathode operation
    Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
    Plasma interaction with materials
    Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
    Understanding of magnetic fields and conductive/radiative heat transfer
    Skills:

    Test experience
    Writing test plans
    Performing test setup
    Test analysis
    Basic understanding of facility requirements and test article installation
    Microsoft Office
    Education:

    B.S. in Mechanical, Aerospace, Physics, or related field.
    Key Words: Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
     
    Job Number: SH366413
    Job Location: Canoga Park, CA
    Rate: DOE
    Per Diem: No
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 04/17/2017
    Firm Name: CDI CORPORATION
    Attention: Stephen Harwan
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Development Test Engineer / Electric Propulsion CA

    Description:
    Job Title: Development Test Engineer / Electric Propulsion
    Job Number: 159106/6914524
    Location: Canoga Park, CA
    Compensation: 48/hr max
    Assignment Length: 6 month contract

    Description:


    ** An active Secret Clearance is preferred, but NOT required.

    ** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
    ** An active Secret Clearance is preferred, but NOT required.

    ** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


    Experience/familiarity with the following preferred:

    -Electric Propulsion
    -Vacuum chamber systems and low pressure environments -High voltage circuits and electronics -Thruster testing or hollow cathode operation -Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.) -Plasma interaction with materials -Thruster performance characteristics (Thrust, Isp, efficiency, etc.) -Understanding of magnetic fields and conductive/radiative heat transfer

    Skills:

    -Test experience
    -Writing test plans
    -Performing test setup
    -Test analysis
    -Basic understanding of facility requirements and test article installation -Microsoft Office

    Key Words:

    Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
    Keywords:
    Education: B.S. in Mechanical, Aerospace, Physics, or related field.
    # of Positions: 4
     
    Job Number: MB-6914524
    Job Location: Canoga Park, CA
    Rate: 48/hr max
    Duration: 6 month contract
    Input Date: 04/20/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Doors Design Engineer

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI / RF Test Engineer - RM

    Description:
    JSG is looking for a great EMI / RF Test Engineer for our client located in Hawthorne, California.

    1st shift, All candidates must be ITAR compliant.
    No corp to corp or H1B sponsorship.


    Overview:
    Our EMI/EMC team works to ensure our avionics hardware will perform when integrated into a complex and delicate system of both sensitive and high-power avionics that must operate through some of the harshest electromagnetic environments imaginable. The team performs exhaustive avionics analysis, design, and test at the board, unit, subsystem, and system levels with work that reaches out to almost all of the departments at the company. You will work closely with a significant number of teams within the company, most consisting of: the hardware design teams, production teams, structures teams, propulsion teams, launch, and mission management teams. They are one of the few teams that interface with almost all aspects of the company and get significant hands on time with flight hardware. They play a crucial role in the development of our systems particularly as we advance our efforts towards satellites and creating safe, reliable, inexpensive, and innovative systems that push the boundaries in size and mass.

    Responsibilities:
    • Write detailed test documentation including test procedures, test plans, and test reports
    • Work closely with avionics unit responsible engineers, test software engineers, and test technicians to successfully plan and execute testing
    • Perform detailed testing of avionics components of the launch vehicle and the spacecraft. Must have the specific skills to perform these tests and not just monitor them -- lightning, shielding effectiveness, and ESD testing are crucial
    • Design and verify new test methods and procedures with a keen eye on automation, efficiency, and test design trades
    • Perform resistance/capacitance/inductance analysis, structural grounding analysis, and circuit isolation analysis as they relate to requirements compliance
    • Troubleshoot EMI events from system to board level
    • Operate a variety of EMI, RF, and electronics test equipment
    • Ensure test equipment needed for testing is functional and calibrated
    • Program test automation software to control test equipment per documented test standards
    • Perform shielding effectiveness, transfer impedance, and resistance (micro-ohm to tera-ohm) measurements
    • Independently perform verifications and document results in a clear, precise, and complete manner
    • Support engineering management with confidence; think creatively -- question the status quo, while following documentation and maintaining prescribed quality standards.

    Basic qualification:
    • Bachelor of science degree in electrical engineering, physics or other similar technical areas of study
    • Minimum of 2 years of experience in a role focused on EMI/EMC testing
    • Experience performing grounding, bonding, and shielding effectiveness measurements with the following equipment: digital multimeter, milliohm meter, megaohm meter, signal generator, spectrum analyzer, oscilloscope
    • Experience with both conducted and radiated EMI/EMC analysis and testing
    • Experience with reading, interpreting and following: circuit schematics, PCB layouts, engineering drawings, BOMS, cable harnesses, wiring schematics, interface diagrams, layout drawings, mechanical drawings and CAD software

    Preferred skills and experience:
    • Advanced degree in Electrical Engineering, Physics or other similar technical areas of study
    • Demonstrated experience troubleshooting EMI events from system to board level
    • Knowledge of electromagnetic field coupling, ohm's law, Maxwell's equations, boundary conditions, image charge/current, and lumped element modeling
    • Demonstrated experience with Mil-Std-1541, Mil-Std-461, Mil-Std-464, Sae-Arp-5412, NASA-hdbk-4002, NASA-Std-4003, NASA-Std-4005, NASA-hdbk-4006, SSP 30237, SSP 30238, SSP 30240, and IEC 61000-4-2
     
    Job Number: 355977
    Job Location: Hawthorne, CA
    Rate: $40hr to $60hr
    Per Diem: yes
    Overtime: yes
    Duration: 6+ month
    Start Date: asap
    Input Date: 05/04/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Electric System Component Outfitting Interface Engineer

    Description:
    This position is located in Nagoya, Japan.

    Electric system component outfitting interface engineer
    • Mechanical/ structural interface engineering expertise
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044922
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Certification Engineers - Wichita, KS

    Description:
    STS AeroStaff Services is currently hiring Electrical Certification Engineers for open positions in Wichita, Kansas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
    • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
    • Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
    • Assist in development of functional test documents for avionics/electrical systems
    • Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
    • Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

    Qualifications:

    • Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
    • Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
    • Strong written and verbal communication skills and competency in one of the subject areas listed above
    • Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38215
    Job Location: Wichita, KS
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/19/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Electrical Design Engineer
    JOB SUMMARY:
    The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
    PRIMARY DUTIES & RESPONSIBILITIES:
    • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
    • Reviews project-related documentation to ensure its accuracy
    • Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
    • Defining the installation requirements of electrical systems and components
    • Creating wiring diagrams for interior monument cabin furnished equipment
    • Creating and designing interior cabin furnished monument Electrical drawings and 3D models
    • Performing electrical load analysis for interior monuments
    • Ensuring compliance of design to latest customer and airworthiness requirements
    • Checking of engineering data produced by peers
    • Participating in design reviews of electrical installations for interior monuments
    • The selection and application of materials and processes appropriate to each design element
    • Ensuring the successful integration of each design element with the product as a whole
    • Supporting Mechanical Design Engineers within the group with guidance on electrical issues
    • Supporting problem solving during manufacturing build process and through aftermarket queries
    • Customer support
    • Assisting in definition and supplier selection for components and equipment
    • Ensuring technical, commercial and weight targets are maintained
    • Communicating effectively and professionally with peers, suppliers and customers
    • Development and introduction of product improvements
    MINIMUM REQUIREMENTS:
    • Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
    PREFERRED QUALIFICATIONS:
    • Competent user of the incumbent CAD and data management systems – Team center and NX
    Aircraft interiors experience.
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/14/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Responsible for design, development and certification support of avionics/electrical systems on Beechcraft Defense Company T-6C aircraft.
    • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23.
    • Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool.
    • Assist in development of functional test documents for avionics/electrical systems.
    • Conduct equipment, system, and aircraft ground testing at Beechcraft Defense Company, Supplier or other testing facilities.
    • Coordinate with other Textron Aviation Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety.

    Required Skills: Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint. Strong written and verbal communication skills and competency in one of the subject areas listed above. Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required. Required Education: Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology.
     
    Job Location: KS
    Input Date: 04/10/2017
    Firm Name: JOHNSON SERVICE GROUP
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    Electrical Engineer II

    Description:
    PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

    In your role, you will:


    The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
     
    Duties:
    • Provide electrical design and development support on a variety of simulator programs.
    • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
    • Support peer reviews for electrical designs.
    • Perform and document electrical load analysis.
    • Support development of Interface Control Documents (ICD)s.
    • Ability to work with a variety of I/O systems.
    • Knowledge of both analog and digital component design.
    • Support development of hardware subcontractor specifications.

     
    As our ideal candidate, you will meet the following requirements:

    Qualifications:
    • B/S in Electrical Engineering.
    • 4+ years of electrical engineering technical experience.
    • Experience with CAD software, preference to AutoCAD.
    • Systems integration experience.
    • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
    • Good computer skills including working knowledge of Microsoft Office.
    • Strong communication skills and good team work.
    Be able to obtain a DOD security clearance.

    Additional requirements: 
    Aerospace experience is required.
     
    At a minimum resumes should reflect experience with the following within the aerospace industry.
     
    •             Design and develop electrical systems on aircraft
    •             Produce wiring diagrams using computer aided design
    •             Experience with electrical load analysis

     
     
    Job Number: 1610060907
    Job Location: Arlington, TX
    Per Diem: No
    Duration: 6 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer Mechatronics

    Description:
    Candidate Requirements:
    We're seeking someone with at least 2-3 years of engineering experience in electronics, electrical, or electronic component testing experience

    Must have test experience where you've collected and analyze data. Whether that is mechanical or electrical engineer doesn’t matter as long as they have the test experience. If you have no test experience, you must be an electrical engineer.


    Must have skills:
    1. Candidates should ideally have test experience AND mechanical or electrical engineering experience. (If they have no testing experience, they must have the electrical engineering experience)

    2. Bachelor's degree in electrical engineering

    3. Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here.

    What Makes This Role Interesting:
    You will have a unique opportunity to work in not only current products, but new product development also. These products are brand new that we’ll roll out for the next model year. You’ll get the opportunity to look into what the whole team does with working on a new product and current products.
     
    Job Number: 3081
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12+ months
    Start Date: ASAP
    Input Date: 04/14/2017
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer – Testing

    Description:
    Job Title: Electrical Engineer – Testing
    Location: Portland, OR. 97217
    Duration: 14 months
    Job Description:
    • The role is to assist the lead engineer and developing test cases and testing of an electronic component.
    • Support client products that are out in the field and answering custom work orders and Shop Calls. This resource will be working on heating ventilation and air conditioning (HVAC).

    Responsibilities:
    • The team is responsible for interior and exterior lighting of all products (headlights, taillights, dome lights in the vehicle). Also responsible for all the switches on the dash and in the truck. They also work with their partners in cab to do the controls for heating ventilation and air conditioning to make sure everything is working correctly and functions as intended. Also making sure that any issues and problems get brought up with the supplier and get resolved.
    • All the client products are supported that are going through the plant right now. The first start of the day will be making sure the plants are happy, looking at custom work orders, shop calls coming in and making sure those are resolved.
    • Then, working with the lead engineer to make sure the current state of the testing is implementing these test cases with our product validation team and making sure the vehicles are using these units are functioning correctly.
    • Managing the test cases and the results and creating some sort of results tracking tool/spreadsheet.
    • The first few months they will be working mostly on getting up to speed to support the current product (80% learning the systems and helping the lead engineer to ensure all items are covered) .
    • Once they stabilize and are able to work independently be working and making sure that the product is as expected. They may also work on other side projects to help the lead engineer.

    Requirements:
    • Looking for 3 years of engineering experience in electronics, electrical, or electronic component testing experience
    • Need to have at least a BA degree with over 2 years of experience.
    • We really want someone who’s had test experience where they’re able to collect and analyze data. If no test: they need to be an electrical engineer.

    Hard Skills:
    • Candidates should ideally have test experience AND mechanical or electrical engineering experience.
    • Bachelor's degree in electrical engineering
    • Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here
     
    Job Number: 3075
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 14 Months
    Start Date: ASAP
    Input Date: 04/07/2017
    Firm Name: OLSA RESOURCES INC
    Attention: Sarabjit Saxena
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    Electrical Fabricator

    Description:
    PDS Tech, Inc.is seeking an ELEC. FLT CNTRL/SIM. LABS for an open position in Stratford, CT
    Responsibilities include:

    • Function: Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.
    • Job Duties:  Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    • Experience with electrical and electronic fabrication.
    • Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    • Experience with all the tooling and dies required to terminate mil-spec wires
    • Experience terminating EMI harness assemblies
    • Experience fabricating wire harnesses
    • Experience fabricating test sets
    • Experience using hand tools, mechanical and electrical
    • Experience with schematics and electrical diagrams
    • Evidence of Lockout Tag Out Authorized training

    Other Requirements:

    • Requires Safety shoes
    • Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

     
    Job Number: 1610054244
    Job Location: Stratford, CT
    Duration: 12 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CHEnAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Electrical Systems Engineer

    Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Long Term contract


    Unique Skills:
    1) AutoCad required Catia V5 preferred
    2) G650 and G500 electrical system design experience preferred.
    3) 14 CFR 25 Subpart H - EWIS experience preferred
    4) Part 25 Certification Experience for Cabin Interiors preferred
    5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6) Experience with power distribution, lighting, switching, sizing and routing.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.

    Job Description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7041
    Job Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 06/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Technician

    Description:
    One year in length
    Maximum Hourly pay rate $18.00
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     

     
    Job Number: 1710063131
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro Mechanical Engineers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Electro Mechanical Engineers for open positions in Melbourne, Florida.

    Note: All candidates must have had secret security clearance in the last five years.

    Job Summary:

    Applies electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Supports and participates in the design, test, modification, fabrication and assembly of prototype electromechanical systems.

    Job Duties & Qualifications:

    • Electro-Mechanical Engineer (Anti-Ice):
    o Primary responsibility includes cognizant engineering of an electronic controller, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
    o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
    o Hardware/software knowledge, knowledge of MIL-STD-1553 and power, military aircraft experience is required
    o Candidate must have experience with development of procurement specifications and supplier interface
    o Knowledge of anti-ice controllers is a benefit
    o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
    o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
    • Electro-Mechanical Engineer (Lighting):
    o Primary responsibility includes cognizant engineering of an aircraft lighting system, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
    o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
    o Hardware/software knowledge, knowledge of various aircraft bus architectures (RS-485, RS-232, MIL-STD-1553) and power, military aircraft experience is required
    o Candidate must have experience with development of procurement specifications and supplier interface
    o Knowledge of aircraft lighting systems/integration is a benefit
    o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
    o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
    • Electro-Mechanical Engineer (Cables):
    o Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems
    o Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
    o Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter
    o Create preliminary block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices
    o Facilitation of design reviews with key stakeholders to ensure designs meet requirements
    o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
    • Electro-Mechanical Engineer (Lines Routing):
    o Position requires extensive inter-departmental coordination with other vehicle system departments including structures, crew & equipment, ECS, maintenance and manufacturing operations teams
    o Requires knowledge of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
    o Proficiency in the design of support brackets and the ability to prepare detailed “Product Definition Packages” (PDPs) utilizing NX or similar 3D CAD software is required
    o Proficiency in 3d cable routing is a required
    o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
    • Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
    • Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
    • Must have an active DoD Secret clearance

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38300
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/20/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Electro-Mechanical Assembler

    Description:

    Job Description
    Perform hand and/ or machine assembly which may include one or more of the following:
    • Operating automated machinery
    • Presses
    • Component identification
    • Soldering
    • Testing and Packaging using small tools and equipment in a teamwork environment
       

    Essential Duties and Responsibilities include the following. Other duties may be assigned.

    • Assemble in compliance with IPC standards including basic soldering (through hole, point to point) .
    • Internal / external customer satisfaction .
    • Operate test equipment and analyze test data .
    • Component identification .
    • Operating small tools/equipment .
    • Verify correct documentation (process sheets, drawings, etc.) .
    • 5S
    • Safety and housekeeping.
    • Overtime as required .
    • Training as required for the position and
    • Assist with the training of new associates in standard manufacturing practices.

     
    Qualifications
    The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    • Strong communications skills .
    • Reading comprehension .
    • Basic math and computer skills .
    • Manual dexterity .
    • Ability to support / lead within a team environment .
    • May be required to properly lift up to 35 pounds maximum.
    • If an employee needs to lift over 35 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.

     
    Desired Characteristics The following skills may be required depending on the MFG Assembly Operations work location within the plant.
     
    • Soldering
    • Desoldering and
    • Repair of visual errors

     
    Education and/or Experience

    • High School Diploma or
    • General Education Degree (GED).

     
     
    First and Second Shifts available
     

     
    Job Number: 1710067030
    Job Location: Lincolnton, NC
    Duration: 6 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mFuAAI&URLSource=cjhunter

    Electro-Mechanical Assembler

    Description:
    PDS Tech is seeking Assemblers for open positions in Redmond, WA.
    • Assembles fabricated parts at floor stations.
    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
    • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
    • Identifies units that fail tests or tolerance levels and repairs as necessary.
    • Position may involve microscope work and require the use of a Clean Room gown and hood.


     
    • Must have computer skills and be familiar with how to use a computer
    • Requires a verifiable high school diploma or its equivalent.
    • Experience working with microscope; working with microscopic components
    • Soldering skills/experience required
    • Must be able to use tweezers, vacuum wands and torque drivers.
    • US citizenship is required.


    This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.

     
     
    Job Number: 1710064077
    Job Location: Redmond, WA
    Duration: 8 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 12720 GATEWAY DR S STE 102
    City, State: TUKWILA, WA 98168-3333
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKmFAAW&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065205
    Job Location: San Diego, CA
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065208
    Job Location: Houston, TX
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065209
    Job Location: Phoenix, AZ
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065206
    Job Location: San Jose, CA
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065207
    Job Location: Los Angeles, CA
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Drafter

    Description:
    Seeking associate’s degree plus 4 years’ experience in directly related drafting work. Accuracy and neatness must be well developed.

    ACCOUNTABILITIES:

    1. The Electronic Drafter has prime accountability to prepare complex detail drawings of electronic products and test equipment.

    2. Occasionally prepares layouts that are not complex.

    3. Prepares complex art work and printed circuit board drawings working from layouts.

    4. Modifies existing electronic drawings, art work and printed circuit drawings.

    This position includes preparation of electronic drawings from rough layouts and verbal instructions. The incumbent must have a developing knowledge of electronic circuits and components, as well as fabrication methods, and must have skills for creating printed circuit art work from layouts. He/She must be capable of drawing straightforward interconnects and assemblies having electronic and mechanical components and detailing all related drawings. He/She may occasionally be responsible for liaison follow-up of electronic jobs in production.
     
    Job Number: 51691
    Job Location: East Aurora, NY
    Rate: 33
    Duration: 6 Mos
    Start Date: ASAP
    Input Date: 04/07/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Cynthia Lashley
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Drafters - East Aurora, NY

    Description:
    STS AeroStaff Services is currently hiring Electronic Drafters for open positions in East Aurora, New York.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    Under the general direction of the Supervisor of Drafting and the technical direction of either an Electronic Packaging Designer, or an Electronic Packaging Drafter, the incumbent assumes responsibility for the detail design of new electronic products and for modification of design of existing electronic products and test equipment.

    Job Duties:

    • This position includes preparation of electronic drawings from rough layouts and verbal instructions
    • The incumbent must have a developing knowledge of electronic circuits and components, as well as fabrication methods, and must have skills for creating printed circuit art work from layouts
    • He/She must be capable of drawing straightforward interconnects and assemblies having electronic and mechanical components and detailing all related drawings
    • He/She may occasionally be responsible for liaison follow-up of electronic jobs in production
    • The Electronic Drafter performs his duties with limited supervision and is free to act and make decisions within the framework of existing standards and procedures including client policy and good drafting practices
    • His/Her duties will be approximately 75% routine and 25% creative; in which case, the incumbent finds it necessary to apply his knowledge and experience to new and different situations
    • The Electronic Drafter has prime accountability to prepare complex detail drawings of electronic products and test equipment
    • Occasionally prepares layouts that are not complex
    • Prepares complex art work and printed circuit board drawings working from layouts
    • Modifies existing electronic drawings, art work and printed circuit drawings

    Qualifications:

    • Associate’s degree plus 4 years’ experience in directly related drafting work
    • Accuracy and neatness must be well developed

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38196
    Job Location: East Aurora, NY
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 04/07/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Electronic Troubleshooter

    Description:
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
     
    Job Number: 1710066458
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

    Embedded S/W Engineer - Level 3 - PA - C

    Description:
    Chipton-Ross is seeking a Embedded S/W Engineer - Level 3 for an opening in Archbald, PA.

    RESPONSIBILITIES:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel

    REQUIRED EXPERIENCE:
    Software documentation experience. Software verification experience
    Hardware/software integration: 4-5 Years
    C/C++ programming: 6-8 Years

    EDUCATION:
    High School Diploma

    WORK HOURS:
    9/80, 1st Shift

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 162465
    Job Location: Archbald, PA
    Rate: Up to $45.00 DOE
    Duration: 11 Months
    Input Date: 12/11/2017
    Firm Name: CHIPTON ROSS
    Attention: Max Cameron
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mcameron@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Level 2 with active secret TX

    Description:
    Embedded S/W Engineer - Level 2
    Description
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
    Desired:

    Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    Razor (CM Control) 0-3 Years No
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Seeker Programming and/or Integration 4-5 Years No
    Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
    Embedded SW Engineering 4-5 Years Yes
     
    Job Number: DW-1366
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 06/07/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Level 2 with active secret TX

    Description:
    Embedded S/W Engineer - Level 2
    Description
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
    Desired:

    Driver Development, Python, ROS, CODESYS

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    COTS SBC 0-3 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    VxWorks 4-5 Years Yes
    Git 4-5 Years Yes
    J1939 or CANBus Experience 4-5 Years Yes
    Eclipse 4-5 Years Yes
    Ground Vehicles and Autonomy Experience 4-5 Years Yes
    Embedded SW Engineering 4-5 Years Yes
    Driver Development 0-3 Years No
    Python 0-3 Years No
    CODESYS 0-3 Years No
    ROS 0-3 Years No
     
    Job Number: DW-1367
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 06/07/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded SW Engineer(C/C++/Red Hat/ Embedded/ Cleared) in Grand Prairie, TX #1366AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159151
    Location: Grand Prairie, TX
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Must have Secret clearance in place prior to submittal of resume.
    Resume must have status of clearance stated.
    Exempt

    Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.

    Interfaces with customers, suppliers, application users, and other technical and support personnel.

    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering

    Desired:

    Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    C/C++ 4-5 Years Yes
    Razor (CM Control) 0-3 Years No
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Seeker Programming and/or Integration 4-5 Years No
    Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
    Embedded SW Engineering 4-5 Years Yes
     
    Job Number: 1366AS
    Job Location: Grand Prairie, TX
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 04/24/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - 3/4/5 Cuda development VxWorks Linux Ubuntu CentOS Windows CA

    Description:
    17006478/1579
    Embedded Software Engineer - 3/4/5

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Mar 27, 2017

    Position: Embedded Software Engineer 3/4/5

    Location: Redondo Beach, CA

    Duration: 9 Months

    Rate: open

    Designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, aircraft flight control and display systems, pacemakers, defibrillators, mechanical and electrical systems. Interfaces with customers, suppliers, application users and other technical and support personnel.


    Basic Qualifications:

    Minimum 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

    Cuda development

    Embedded ARM processor developer
    Embedded Power PC processor developer
    Embedded Intel PC processor developer

    Strong OS Experience:

    Wind River VxWorks Versions 6 – 7
    Wind River Linux Versions 6 -7
    Yocoto Project Linux

    Development Environment: OS:

    Windows 7
    Ubuntu 14 – 16
    Red Hat Linux 7
    CentOS 7


    Preferred Qualifications:

    Knowledge of Software development process
    Knowledge in algorithms
    Hardware Knowledge
     
    Job Number: MB-17006478
    Job Location: Redondo Beach, CA
    Rate: open rate
    Duration: 9 month contract
    Input Date: 06/06/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -Modern C/C++ (4-5 Years experience)
    -Agile Product Development (4-5 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -Boost Libraries (4-5 Years experience)
    -Web Services (SOAP/REST) (4-5 Years experience)
    -Jenkins (4-5 Years experience)
    -Continuous Integration (4-5 Years experience)
    -Qt Application Framework (0-3 Years experience)

    Desired:
    -Domain Knowledge of Air and Missile Defense (0-3 years experience)
     
    Job Number: 7298
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 09/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -US DOD Secret Clearance Required (4-5 years experience)
    -BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
    -C/C++ (4-5 years experience)
    -Linux (Red Hat) (4-5 years experience)
    -Embedded SW Engineering (4-5 years experience)

    Desired:
    -Razor (CM Control)
    -Domain Knowledge of Air and Missile Defense
    -Seeker Programming and/or Integration
    -Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
     
    Job Number: 7295
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 10/12/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -C/C++ (4-5 Years experience)
    -COTS SBC (0-3 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -VxWorks (4-5 Years experience)
    -Git (4-5 Years experience)
    -J1939 or CANBus experience (4-5 Years experience)
    -Eclipse (4-5 Years experience)
    -Embedded SW Engineering (4-5 Years experience)
    -Ground Vehicles and Autonomy Experience (4-5 Years experience)

    Desired:
    -Driver Development (0-3 Years experience)
    -Python (0-3 Years experience)
    -ROS (0-3 Years experience)
    -CODESYS (0-3 Years experience)
     
    Job Number: 7297
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 07/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer Level 2 with active secret TX

    Description:
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159149/1368
    Location: Grand Prairie, TX
    Compensation: 80/hr
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Exempt

    Description:


    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

    Must have active / transferable Secret Clearance prior to submittal and shown on resume.

    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

    Desired:

    Domain Knowledge of Air and Missile Defense


    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    Modern C/C++ 4-5 Years Yes
    Agile Product Development 4-5 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Boost Libraries 4-5 Years Yes
    Web Services (SOAP/REST) 4-5 Years Yes
    Jenkins 4-5 Years Yes
    Continuous Integration 4-5 Years Yes
    Qt Application Framework 0-3 Years Yes
     
    Job Number: DW-1368
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 06/07/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Emergency Electric Power Generation Integration Engineer

    Description:
    This position is located in Nagoya, Japan.

    Emergency electric power generation integration engineer
    • RAT hardware interface with aircraft expertise
    • Mechanical/ structural interface engineering expertise
    • Hydraulic system knowledge
    • Capability to review stress analysis by supplier/ partner
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044923
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FoAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engine Lab Test Engineer

    Description:
    Required Skills/Certifications



    Bachelor’s Degree in Mechanical or Electrical Engineering from accredited college or university.

    5-10 years of experience in engine testing or program management.

    Specific Knowledge of Diesel Engine Mechanics

    Specific knowledge of Electrical control systems

    Specific knowledge of Microsoft Office applications (including excel and project)



    Desired Skills/Certifications



    Strong drive for meeting internal and external customer requirements.

    Motivated and self-starter.

    Experience in Engine Testing.

    Ability to work with engineering, global labs, and program management effectively.

    Ladder Logic and other programming language experience

    Has working knowledge of a diesel engine.

    Highly organized and close attention-to-detail.
     
    Job Number: 51692
    Job Location: Erie, PA
    Overtime: yes
    Duration: 1 year+
    Input Date: 04/07/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Engineer - Payloads

    Description:
    This position is located in Nagoya, Japan.  Interior engineer who can manage PRA related to interior such as fluid leakage. Will lead and provide technical quality review of the development and documentation of mechanical and fluid systems and the thermal environment to establish system design.  Lead activities to validate and verify mechanical and fluid system requirements.  Leads the development, maintenance or modification of system components designs/proposal to provide installation and detail documentation.  Must be familiar with waste water management and fluid leakage.  Manages supplier development, test and production activities and directs supplier to optimize integration and achieve program goals.  Prioritizes, tracks performance and documentation of analysis of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate and assess the design.  Familiar with current FAA regulations regarding all interior components.
    • 15-20 years experience 
    • Bachelors Degree in Engineering
    • International experience desirable
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification

     
    Job Number: 1610044711
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000036dHAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer 4 (Shock/Structural)

    Description:
    The Engineer 4 candidate will investigate and prepare structure analyses, in particular Shock analyses NAVSEA 3010 procedures, to support ship alterations and equipment installations based on customer requirements. The Engineer will be responsible for developing and reviewing mechanical and structural drawings and providing calculations and analyses that support design requirements. He/she will work independently, explain system characteristics, and provide technical guidance to Junior Engineers and Designers. Travel up to 20% of the time to perform ship checks and surveys. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Plans, conducts, and evaluates projects or moderate phases of significant projects, coordinating efforts with engineers and staff. Conducts investigations and tests of advanced complexity. May direct teams in the performance of complex tasking. Performs engineering functions in one or more of the following specialties for marine applications: structural, civil, and or naval. Considered expert in field of specialty.

    Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. Lifting and moving of materials not to exceed the guidelines set for one man lift. Possible exposure to fumes and irritants normally encountered in an industrial or shipboard environment. May involve gathering of data while observing machinery or equipment operations
     
    Job Number: 001
    Job Location: Newport News, VA
    Rate: 44.33
    Per Diem: possible
    Overtime: possible
    Duration: 6 mos +
    Start Date: ASAP
    Input Date: 04/14/2017
    Firm Name: TECHNICAL RESOURCES UNLIMITED INC
    Attention: Hunrington Ingalls Industries
    Address: 210 BROADWAY STE 106
    City, State: LYNNFIELD, MA 01940
    Phone: 781/595-8200
    800 Phone: 855/878-8200
    Fax Phone: 781/598-2240
    Website: www.truinc1.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III / Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines CA

    Description:
    Job Title: Engineer III
    Job Number: 159153/4155
    Location: Irvine, CA
    Compensation: 50-60/hr
    Assignment Length: contract


    Description:


    Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.)

    · Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
    · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
    · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
     
    Job Number: JK-4155
    Job Location: Irvine, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 05/23/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III( RTCA/DO-178B development and verification) in Irvine, CA #4155AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Engineer III
    Job Number: 4155
    Location: Irvine, CA
    Compensation: DOE
    Assignment Length: 6 month contract

    Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    Key Skills / Qualifications:
    · Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
    · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
    · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
    · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
    · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
    · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
    · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

    Key Requirements for the job:
    Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
     
    Job Number: #4155AS
    Job Location: Irvine, CA
    Rate: Open, DOE
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 05/23/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer Mechanical Design - 5 with active secret / NX FL

    Description:
    1582
    Engineer Mechanical - 5 (Job Number: 17007853)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne

    Shift: 1st Shift

    Target Start Date: Jun 5, 2017

    Subsystem Design Engineer -5 (multiple openings)

    Rate: $70/hr.

    Work Week: 9/80

    Duration: 1 year

    Active Secret clearance required to start


    The candidate must have a DoD Secret Clearance that has been established or renewed within the last 6 years. Final offers are contingent upon SAP award.

    Utilizing Siemens NX 10, the candidate will be responsible for designing detail parts, assemblies and installations associated with fixed-wing aircraft ECS, Fuel, Fire protection, Secondary Power, Electrical subsystems, mechanisms and Hydraulics subsystems.

    Responsible for the development and integration of various aircraft ECS components including ducts, manifolds, plenums.

    Responsible for the development and integration of aircraft fuel and hydraulic system components including valves, filters, reservoirs, mechanical lines, machined and sheetmetal detail parts.


    Basic Qualifications:

    14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education.


    Preferred Qualifications:

    Siemens NX or Teamcenter experience.
     
    Job Number: MB-17007853
    Job Location: Melbourne, FL
    Rate: 70/hr max
    Duration: 12 month contract
    Input Date: 07/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Engineering Design 1/2 (3) - FL - C

    Description:
    RESPONSIBILTIES:
    Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
    Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

    REQUIRED EXPERIENCE:
    Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
    Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
    Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
    Preferred Qualifications:
    Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

    EDUCATION:
    Bachelors in Science Mechanical Engineering, or Master's degree.

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    HOURS:
    9/80 workweek

     
    Job Number: 162898
    Job Location: Melbourne, FL
    Rate: $28 to $40.00 DOE
    Duration: 9-12 months
    Input Date: 12/17/2017
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Engineering Design 2/3- Secret Clearance

    Description:
    PDS Tech is seeking a candidate for the Engineer Design 2/3 Secret Clearance position located in Melbourne, FL.  
    Position Summary / Responsibilities 
    Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
    Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost.
    Coordinates with other organizations affected by design development.
    Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures.
    Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
    Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

     

     Basic Qualifications:


    (2 Positions) – Crew System Mechanical Design

    • Develop layouts and PDPs for non-complex mechanical Crew Systems products.
    • Level 2: 2 Years with Bachelors in Science; 0 Years with Masters
    • Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
    • Current DoD Secret Clearance 

    Preferred Qualifications:
    Current DoD Secret Clearance Required.
     
    Job Number: 1710066874
    Job Location: Melbourne, FL
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Michael Accunzo
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021kxmAAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer - Valves IV

    Description:
    A leading Aerospace company, located in Canoga Park, CA, is seeking a Engineering Designer IV- Valves for a 6+ month contract role.

    ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:
    Candidates must have experience with Creo, Windchill and GD&T Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.
     
    Job Number: 11851
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Months+
    Start Date: May
    Input Date: 04/17/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates should have experience specifically with flight electronics packaging for space applications **
    ** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
    ** Candidates should be able to design from concept to a drawing released in Creo **

    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
    - Position will support various different Electric Propulsion programs

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: 6990
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 04/25/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV - Valves CREO CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 159295/7009394
    Location: Canoga Park, CA
    Compensation: 60/hr
    Assignment Length: 5 month contract

    Description:


    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.


    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:

    Candidates must have experience with Creo, Windchill and GD&T Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

    Engineers also required to analyze and verify product design and performance for adequacy and reliability.

    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.

    Must be able to prepare and make presentations at both internal and customer design reviews.

    Keywords:

    Education: BS degree in Engineering or equivalent. MS degree is desired.

    5 years of related experience as technical designer in rocket propulsion hardware and ProE/Creo CAD systems # of Positions: 2
     
    Job Number: MB-7009394
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 5 month contract
    Input Date: 05/01/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158326/6312362
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:


    Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

    ** Candidates should be able to design from concept to a drawing released in Creo **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Perform engineering design tasks related to space electronics based products.
    Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

    Skills:
    Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    Familiarity with aerospace/defense engineering design and production processes and disciplines.
    Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Keywords:
    Education:
    Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: MB-6312362
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 04/24/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV – Valves

    Description:
    Engineering Designer IV – Valves

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    3+ month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

    Design and Development Engineer
    - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Candidates must have experience with Creo, Windchill and GD&T
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in Engineering or equivalent. MS degree is desired.
    - 5 years of related experience as technical designer in rocket propulsion hardware and ProE/Creo CAD systems.
     
    Job Number: 7320
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 04/26/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment Tool Designer

    Description:
    Summary: This position involves the design/modification of tooling and peculiar ground support equipment (GSE) required for VH-92 / S-92 aircraft maintenance, and the validation / 'fit check' of each designed/modified item. In addition to design work, this position will also involve support of the logistical requirements associated with all design work and contract requirements, as well as sustainment support throughout the duration of the contract.
    The following outline the normal scope of work associated with this position:
    - Coordinate with VH-92 GSE IPT Lead to support all GSE engineering related requirements.
    - Design support of new peculiar support equipment (PSE)
    - Support Engineering change proposals (ECPs)
    - Support all drawing updates requirements/revision control for existing GSE
    - Validate newly designed GSE
    - Evaluate COTS items from our suppliers as needed.
    Required Skills:
    - Must be able to work with CATIA V5. MatrixOne knowledge is desired. Cadra and Catia V4 knowledge is beneficial.
    - A practical knowledge of and experience with maintenance tools (e.g. aircraft and/or auto repairs)
    - A working knowledge of statics and dynamics (Mechanical Engineering)
    - A general understanding of material strengths and properties
    - Electrical/hydraulic design capabilities are beneficial.
     
    Job Number: 37912
    Job Location: Stratford, CT
    Duration: 12 months
    Start Date: ASAP
    Input Date: 04/18/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    FSA PRA Propulsion/Tailcone - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a FSE PRA Propulsion/Tailcone Engineer for the Mechanical Systems Group, Regional Jet Development Project.

    Able to review fire safety activities for engine nacelle / tailcone conducted by other teams
    - Able to prepare certificate of pylon fire safety (including ELOS for thermal analysis in case of engine fire, Drainage and Ventilation)
    - Able to prepare FSE PRA reports for propulsion/APU zones
    - Understanding of the regulatory requirements for fire safety in the propulsion and APU zones
    - Capability to coordinate the drainage/ventilation analyses and tests with the specialists 
    - Good communication with other ATA teams and suppliers
    - Capability of documentation for T/C
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053708
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002C9aQAAS&URLSource=cjhunter

    FSE PRA PA Lead - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a FSE PRA PA Lead for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    Able to manage of FSE PRA and CP G15 issues for pressurized area (PA)
    -Able to prepare of FSE PRA reports
    Complete FSE PRA verification activities 
    -Experience of zonal level analysis
    -Understanding of the regulatory requirements for fire safety in the pressurized area
    -Good communication with other ATA teams and suppliers
    -Experience of discussion with the authorities
    -Capability of documentation for T/C
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053085
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiJAAU&URLSource=cjhunter

    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Description:
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Location: Orlando, FL
    Duration: 1 year contract
    Pay Rate: $65/hr - $75/hr (DOE)
    Shift: 1st, 9/80
    **Must have an Active Secret Clearance**


    Job Description:
    -Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
    -Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
    -Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
    -Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
    -Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
    -Requires good verbal and written communication skills, and ability to work in a team environment.
    -Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
    -Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


    Mandatory Skills:
    -Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


    Desired Skills:
    -Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    -PRO E and/or CATIA skills
     
    Job Number: 7019
    Job Location: Orlando, FL
    Rate: 65.00-75.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 12/12/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    Flight Controls Engineer

    Description:
    PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

     
    •  
    • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
    • Applicable coursework or coop/intern experience to this position desired.
    • Working knowledge of generic CAD design tool processes is desired.
    • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
    • Experience with Kinematics in CATIA
    • Flight Controls Systems design experience a plus
    • Must have excellent verbal communication and presentation skills.
    • Proficient with Microsoft Office applications including Word and Excel.
    • Professional demeanor, troubleshooting and organizational skills are necessary.
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610045561
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

    Flight Readiness Technician-SECRET

    Description:
    PDS Tech is seeking a Flight Readiness Technician for an open position in Palmdale, CA.

    In your role, you will:

    • Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight.
    • Perform operational checkout of aircraft prior to and during preflight.
    • Inspect explosive and armament installations.
    • Maintain aircraft historical records.
    • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
    • Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems.
    • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
    • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting,adjustment and repair of any electrical or electronic system.
    • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
    • Perform operational checkout of hydraulic systems and mechanical systems.
    • Diagnose and correct hydraulic and mechanical malfunctions.
    • Operate engines during run-ups and troubleshoot when needed.
    • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines.
    • Install or replace reservoirs, etc. and repair leaks in same.
    • Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators.
    • Splice, route, clamp, solder, and string tie wires or wire bundles.
    • Repair, install and hook up bomb, missile and rocket racks and pylons.
    • Install and load ejection seats and guns.
    • Install adjust, repair and replace structural parts and assemblies.
    • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures.
    • Modify aircraft components or aircraft support equipment.
    • Perform composite repairs
    • Must have Secret Clearance with the ability to obtain a Top Secret.

    As our ideal candidate, you will meet the following requirements:
    • Specialized vocational training, or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience.
    • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
    • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
    • Knowledgeable and able to use computer systems for office and shop applications.
    • Knowledgeable about and able to work in FOD controlled environments.
    • Knowledgeable and able to apply shop math.
    • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    • Able to complete and maintain all required training and certifications needed to do your job efficiently.
    • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
    • Must have Secret Clearance with the ability to obtain a Top Secret.

     
    Job Number: 1610061554
    Job Location: Palmdale, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G32jAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Controls Engineer - RM

    Description:
    Johnson Service Group is seeking a Flight Test Controls for a 15+ month contract in West Palm Beach, FL!

    The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

    Description:

    Plan, conduct, manage and report flight control systems and handling qualities flight tests.
    Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
    These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
    Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
    Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
    Utilize Mat lab to analyze flight test data and work with control laws.
    Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
    Experience:

    Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
    Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
    Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
    Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


    Additional Notes

    The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
     
    Job Number: 356488
    Job Location: West Palm Beach, FL
    Rate: $39hr
    Per Diem: yes
    Overtime: yes
    Duration: 15 months
    Start Date: asap
    Input Date: 05/04/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

    We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

    Essential Functions:
    Coordinate test and certification requirements.
    Author flight test and ground test plans including test hazard analysis.
    Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
    Support instrumentation installation as required.
    Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
    Support flight and ground test conduct and data collection.
    Analyze test data and evaluate compliance with regulations.
    Prepare certification test reports.
    Domestic and occasional international travel is required.
    Desired Qualifications:

    5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
    Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
    Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
    Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 12/07/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: smcglinsey@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education/Experience
    Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-156
    Job Location: Savannah, GA
    Rate: $56-$67/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
    -Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    -Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6952
    Job Location: Savannah, CA
    Rate: 56-67
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/03/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Flight Test Engineer - Test Pilot School Graduate - Contract-WIC03960-C

    Description:

    PDS is looking for an Flight Test Engineer - Test Pilot School Graduate:

    You have built on your strong academic results with a number of years of employment in a Flight Test Engineer role. You are now interested in expanding your horizons and continue your development as a Flight Test Engineer working in a Flight Test Center. You will have the opportunity to exercise the exceptional theoretical and practical knowledge gained through the conduct of a variety of flight test tasks. This knowledge will directly contribute to the safe and efficient conduct of flight test activities. These activities will support company development or certification testing for the wide range of company products. You will work side by side with Test Pilots to develop test plans and safety assessments and use your exceptional communication skills to liaise with other functional groups in the test center.

    Qualifications
    As our ideal candidate:     



    • You have 3-8 years of flight test experience
    • You have a degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering or graduated from a recognized Test Pilot School
    • You have demonstrated capacity and skills to prioritize and manage large amounts of information.
    • You have a strong understanding of common flight test procedures and requirements.
    • You have an appreciation for the existence of Transport Canada, FAA and EASA Certification processes and procedures (or equivalent military processes)
    • You have the interpersonal skills necessary to work effectively with a variety of individuals, departments and organizations.
    • You have well-developed written and verbal communication skills.
    • You will have an understanding that the flight test environment may require irregular work hours and does require travel.
    • You must be able to be obtain and maintain a FAA Class 3 Medical Certificate.
    • You have a significant number of airborne test conductor experience.


     







     






     
    Job Number: 1610061439
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G29GAAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrument Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.

    Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

    This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

    Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

    Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.

    Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: 50660
    Job Location: Windsor Locks, CT
    Overtime: yes
    Duration: 1 year+
    Input Date: 04/18/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrument Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.

    Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

    This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

    Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

    Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.

    Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: 50660
    Job Location: Windsor Locks, CT
    Overtime: yes
    Input Date: 04/18/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Flight Test Instrument Engineer

    Description:
    PDS Tech, Inc. is seeking a Flight Test Instrument Engineer for a position in Windsor Locks, CT
    • Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
    • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
    • This can involve testing, data analysis, and interface with all aspects of the engineering department.
    • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
    • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met
    • Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures,
    • Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. 

    • Experience with advanced instrumentation and data acquisition systems is required.
    • Knowledge of LabVIEW desired.
    • Experience should also include five years working on the testing of complex mechanical systems, including testing of components such as, heat exchangers, pumps, fans, & accumulators.
    • Must have the ability to work independently and be self-motivated.
    • Excellent communication skills, written and verbal are required.
    • Proficiency in Microsoft Office software products is required. 

     
    Job Number: 1610060263
    Job Location: Windsor Locks, CT
    Duration: 12 months
    Input Date: 12/11/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fu6pAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Unique Skills:
    Extensive Flight Test mechanical design experience required. Extensive knowledge and experience in CATIA V5

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-172
    Job Location: Savannah, GA
    Rate: $56-$67
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 08/28/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com