Job Search Results

634 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 10:04PM Pacific Time by ContractJobHunter. )

Listings 1 - 634

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
#35707 Die Cast Maintenance Technician

Description:
Die cast machine maintenance technician

Contract Type - Full Time

Industry - Automotive

Job location - Sparta Illinois
Start - Immediate
Compensation - To be determined by the individual experiences and qualifications
Overtime - Negotiable
Visa Sponsorship - None
Relocation Assistance - Negotiable

Job Requirement
Required:
- High School/GED
- Two-year Machine Technology degree or similar degree/certification
- Knowledge of general foundry practices
- Solid experience in troubleshooting maintenance and repair on a variety of Machines including realignment and adjustments to machinery
- Experience in programming and troubleshooting PLC's and electronic equipment
- Strong mechanical and electrical troubleshooting skills
- Ability to read and interpret blueprints and machine control schematics
- Must be flexible and willing to work any shift schedule including overtime and weekends as necessary.
- Stand, climb, bend kneel and stoop to perform repairs of tooling and other equipment for most of the 8-hour shift depending on assignments.
- Use moderate physical effort in the use of hand tools, wrenches, hoists, pry bars, hammers, etc.
- Carry weights of up to 50 lbs occasionally for short periods.

Job Duties
SUMMARY
Ensures operation of machinery and mechanical equipment by performing maintenance on machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.

DESCRIPTION
1. Analyzes machine problems by using troubleshooting techniques, repair manuals, drawings or manufacturer's specifications to determine logical approach to correct the problem.

2. Utilizes hand tools and test instruments such as voltmeter, ammeter, ohmmeter or micrometer caliper and dial indicators.

3. Tests electronic components and circuits to locate defects.

4. Replaces defective components and wiring.

5. Aligns, adjusts and calibrates machines according to specifications.

6. Maintains records of repairs, calibrations and tests.
7. Fabricates parts if not commercially available, using machine and hand tools common to the trade. Writes parts list for equipment repairs.
 
Job Number: 35707
Job Location: Sparta, IL
Rate: TBD
Per Diem: No
Overtime: Yes
Duration: Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: NSR Group
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
#35712 Support services technician

Description:
(2 positions available)
Advertiser Type Direct employment by the client company

Contract Type - Full Time
Industry - Automotive

Job location 1 - Mexico, Missouri, USA
Job location 2 - Hannibal, Missouri, USA
Please indicate which location you are interested in.
Start - Immediate
Compensation - To be determined by the individual experiences and qualifications
Overtime - Negotiable
Visa Sponsorship - None
Relocation Assistance - Negotiable

Job Requirement
- High School/GED
- Certificate from technical/trade school or relevant work experience to qualify for industrial “journeyman” status in the electrical, electronic, or mechanical fields. Must pass BMCT testing.
- 2+ years related experience.
- Must be capable of interpreting blueprints and use the proper instrumentation necessary to repair and install machinery.
- Stand, climb, bend kneel and stoop to perform repairs of all types on plant equipment for most of the 8-hour shift depending on assignments.
- Use moderate physical effort in the use of hand tools, wrenches, etc.
- Carry weights of up to 50 lbs occasionally for short periods.



Job Duties
SUMMARY
Provides electrical, electronic, mechanical and hydraulic repair and maintenance (including some fabrication). Performs support activities for die maintenance and machine shop functions.

DESCRIPTION
1. Repairs and maintains electrical, electronic, mechanical and hydraulic functions of the operating die cast machines including preventive and predictive maintenance.
2. Operates various machine shop pieces of equipment including lathes, drill presses, saws, hand tools meters, gauges, micrometers and computers.
3. Programs PLCs for the die cast machines and trim press operations as well as electronic, electrical and mechanical troubleshooting.
4. Performs sludge removal (removal of impurities) from the molten metal furnace using long-hand tools while dressed in protective headgear and protective clothing.
 
Job Number: 35712
Job Location: MO
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Next Step Resources
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / CATIA V5 / Electrical Wire Harness Installation and Equipment Installation and structural design / aerodynamic analysis / wind tunnel test / Computational Fluid Dynamics CA

Description:
Aeronautical Engineer-N
Palmdale CA
65-75/hr
Active secret

Description
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
Skill/Experience/Education
Mandatory:

Experience with technical background in aerodynamic analysis.- Experience with technical background in wind tunnel test planning and execution.
Must have a Final Secret to start and the ability to obtain a Secret SAR clearance and access. Must be a US Citizen this position is located at a facility that requires special access.
Desired:

Bachelor Degree or Higher in a Technical Engineering Discipline- Computational Fluid Dynamics experience, including mesh generation, CFD solution, and post processing analysis is preferred.- Wind Tunnel Testing experience, and data reduction experience is preferred- Experience with wind tunnel model supplier coordination is preferred.- Experience with wind tunnel test supplier coordination is preferred- Excellent written and oral communication skills is preferred.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CFD Computational Fluid Dynamics 0-3 Years No
 
Job Number: DW-0473
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Manufacturing Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Aerospace Manufacturing Engineers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer performs functions in the design, fabrication, modification and/or evaluation of manufacturing operations.

Job Duties:

• Prepares plans, conducts support studies, and provides analysis or tests in the development of manufacturing operations
• Responsibilities are diverse in scope where analysis of situations or data requires sound technical judgment
• Utilizes lean manufacturing to reduce cost and cycle time
• The Manufacturing Engineer performs complex functions in the design, fabrication, modification and/or evaluation of manufacturing operations
• Prepares complicated plans, conducts support studies, and provides analysis or tests in the development of manufacturing operations
• Responsibilities are diverse in scope where analysis of situations or data requires sound technical judgment
• Utilizes strong lean manufacturing skillset to reduce cost and cycle time
• Resolves engineering problems by collecting and analyzing information; researching, analyzing, adapting, and modifying engineering techniques; recommending solutions; reviewing drawings, schematics, and diagrams; evaluating installations, components, materials, and suppliers; resolving design integration issues; developing specifications and safety standards
• Lean manufacturing skill set and knowledge with experience implementing lean methodologies/tools
• Experience establishing labor standards, line balancing, and factory layouts to improve material flow and labor efficiencies to meet Safety, Quality, Delivery, and Cost targets
• Evaluates electrical systems, avionics, products, components and applications applying knowledge of electricity and materials
• Develops manufacturing processes by designing and modifying equipment and practices; soliciting observations of stakeholders and application of Lean Manufacturing techniques
• Assures compliance with all applicable specs and regulations
• Resolves complex engineering problems by collecting and analyzing information; researching, analyzing, adapting, and modifying engineering techniques; recommending solutions; reviewing drawings, schematics, and diagrams; evaluating installations, components, materials, and suppliers; resolving design integration issues; developing specifications and safety standards
• Strong lean manufacturing skill set and knowledge with experience implementing lean methodologies/tools
• High level of experience establishing labor standards, line balancing, and factory layouts to improve material flow and labor efficiencies to meet Safety, Quality, Delivery, and Cost targets
• Evaluates electrical systems, avionics, products, components and applications applying knowledge of electricity and materials
• Develops manufacturing processes by designing and modifying equipment and practices; soliciting observations of stakeholders and application of Lean Manufacturing techniques
• Assures compliance with all applicable specs and regulations

Qualifications:

• Bachelor’s Degree - Engineering (4 Yr) or related required; Advanced Engineering Degree, BB Certification, and/or GB Certification preferred
• 1-4 years’ Aircraft Manufacturing/Maintenance/Repair experience required; 5-9 years’ Aircraft Manufacturing/Maintenance/Repair experience preferred
• Strong Verbal Communication
• Strong Written Communication
• Analytical and Statistical Tools
• Strong Attention to Detail
• Adept at Analyzing and Resolving Complex Information
• MES, CATIA, and SAP experience
• Proficiency with planning practices and tools
• Proficient in Lotus Notes, Internet Explorer, Microsoft Office (Word, Excel, & Power Point), MES, CATIA, & SAP
• Strong organizational skills
• Presentation Skills
• Utilization of Lean Production concepts
• Data analysis and consolidation
• Cope with deadlines and pressured situations
• Interact with management, staff, and production personnel
• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations
• Ability to work flexible hours and different shifts if required
• Employees will be subject to the random drug and alcohol testing under FAA regulations
• Authorized to work in the U.S.
• Foreign travel may be required
• Ability to obtain a Passport and a Brazilian Visa
• Proactive thinker
• Commitment to company values and complies with department norms, policies, directives, and procedures
• Incorporates Lean and P3E processes and concepts into daily activities
• Strive for continuous improvement to processes and procedures
• Honors and protects confidential and proprietary documents and information
• Satisfies work schedule requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38677
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace Quality Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

As a quality inspector you will be responsible for being the last line of defense in assuring mission success. You will perform in-process inspections and verify that all key performance and design characteristics are met or exceeded during test preparation and Acceptance Testing. You will be working hands on with the most cutting edge rocket technology currently available and will be part of history.

Job Duties:

• Perform receiving, in process, and final inspection on Structures and Propulsion major subassemblies, including mechanical, electrical, electro-mechanical, pneumatic and hydraulic parts, components, and sub-assemblies
• Inspect, verify, and proactively support Structures and Propulsion development and acceptance testing; assuring adherence to design, specification, and testing requirements
• Document production and test anomalies in accordance with prescribed procedures and process as required
• Assist with the specification, purchase, and maintenance of calibrated measuring and test equipment
• Communicate and help resolve quality related issues as they relate to the site and other client locations i.e. Launch Site, Production, and Manufacturing
• Process non-conforming product
• Routinely observe technical operations and offer guidance and/or serve as an additional technical resource
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

Basic Qualifications:

• Must be a U.S. citizen
• Associate’s degree in relevant field required
• Minimum of 3 years’ of experience in an aerospace environment required

Preferred Skills and Experience:

• Airframe and Powerplant License
• Knowledge of Quality Assurance principles, methods, and processes
• Knowledge of Avionics and electrical systems is preferred
• Knowledge of Aerospace Propulsion and Principles is preferred
• Knowledge of Aerospace Structures is a plus
• Knowledge of GSE Systems and general associated equipment is a plus
• Preference will be given to qualified local candidates
• Strong knowledge and experience in Aerospace Standards and its general practices
• Intermediate skill level with Windows operating systems
• Intermediate skill level with Microsoft Office (Excel, PowerPoint, Word, Outlook)

Additional Requirements:

• Ability to work at elevated heights
• Physical effort including standing, lifting and carrying moderately heavy materials or equipment (15 to 50 lbs.)
• Typically exposed to work in extreme outdoor environments – heat, cold, rain
• Work occasionally performed in an environment requiring exposure to fumes, odors, and noise
• Typically 50 hour work weeks, schedule varies depending on site operational needs, flexibility required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38604
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanical Engineers (Level 2 & 3) - Irvine, CA

Description:
STS AeroStaff Services is currently hiring Aircraft Mechanical Engineers (Level 2 & 3) for open positions in Irvine, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Our client is building a highly skilled team that thrives in the creation of new air and ground vehicles. The candidate will work in a rapid development environment where the project will progress from design, fabrication, assembly, and test phases in a short period of time.

The successful candidate will be a highly organized self-starter who has direct, hands-on experience developing vehicle and product systems. The candidate must have strong prototyping experience and be comfortable working in a fast-paced environment. He/she must have a keen understanding of what it takes to build subsystems in this type of environment.

Job Duties:

• Demonstrated success in the development of vehicles in an “advanced programs” and/or rapid development environment
• Expert user of CAD tools like SolidWorks, CATIA V5; able to create and modify models, complex assemblies, and drawings
• General knowledge of structure, materials strengths and properties, design criteria, loading conditions, and processes (e.g. non-destructive testing, corrosion prevention)
• Ability to read, understand and interpret engineering technical information (e.g., drawings, handbooks, industry standards and specifications)
• General knowledge of engineering analysis (e.g. mechanical, electrical, avionics, design, circuit, systems, stress, structural, durability)

Qualifications:

• B.S. in Aerospace, Mechanical, or Systems Engineering (or closely related discipline) with greater than 5 years of applicable experience
• Hands-on build experience with rapid-response prototype vehicles; aircraft, automotive or unmanned vehicles
• Experience designing parts using composite materials and hands-on composite material processing

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38599
Job Location: Irvine, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Unique Skills:

Must be able to support AAP on extended or alternate shifts and weekends.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 98881
Job Location: Pooler, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer - Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7314
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineering

Description:
Unique Skills:
Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/ODA requirements. Looking for a seasoned/experienced electrical engineer/designer/integrator with experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus. Job Description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 100181
Job Location: Pooler, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: cort hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineer

Description:
Unique Skills:
Looking for a seasoned/experienced electrical engineer/designer/integrator. The person needs to be proficient in AutoCAD and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Principal Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-168
Job Location: Savannah, GA
Rate: $61-$68/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
BSEE only/FPGA/Satellite Circuit Design in Dulles, VA #6874345AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Engineer III
Job Number: 6874345
Location: Dulles, VA
Compensation: DOE
Assignment Length: 12 month
VA31 45101 Warp Drive Bldg 1 Dulles VA 20166 United States

Educational/Background Requirement:

 BS in Electrical Engineering required.

 Candidate should have signal processing background and be proficient in signal
processing modeling tool (Matlab preferred).
 MINIMUM 15+ years of experience in satellite digital electrical engineering and testing
which must include at least 5 years in design of electronic circuits for use in harsh/space
environments.
 Must have Extensive experience in product development, planning and life cycle
management; requirements analysis, traceability and documentation and generation of
concepts of operation.

Description:
Core Functions

 Work with other digital designers, RF engineers and signal processing engineers as part
of an integrated product development team to implement signal processing algorithms
into FPGAs including the Xilinx and MicroSemi (Actel) families of products.
 Expert in high speed analog (GHz) and digital data acquisition circuit design including
simulation of analog, power and digital circuitry for space applications.
Expert in proper circuit board layout techniques for low EMI, EMC, and ESD constraints
pertaining to space systems.
 Expert in design of sensor interfaces and control electronics.
 Expert in use of Cadence ADW schematic capture and Sigrity PCB analysis tools.
 Extensive skills in operation of lab equipment, troubleshooting and bench testing of circuit
designs.
 Strong written and verbal communication skills required.
 Perform tasks which include algorithm development, performance modeling, end-to-end
simulation and implementation of digital signal processing within the communications
system.
 Design work will include high-level simulation using tools, such as MATLAB, and detailed
design work targeting specific hardware platforms. The modeling and simulation work will
include a combination of tackling hard signal processing problems to advancing the stateof-
the-art.
 Work in a lab environment on a variety of platforms including Xilinx FPGAs, and high
performance computing platforms.
 Work with other digital designers, RF engineers and signal processing engineers to
implement signal processing algorithms on digital radio subsystems.
Provide direct interface with program office and government personnel on a regular basis.
Requires excellent written and oral presentation skills.
 
Job Number: #6874345AS
Job Location: Dulles, VA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/CompanyODA STC/MRA/TC projects.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7316
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineering Contractor

Description:
Unique Skills:
Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/Client ODA STC/MRA/TC projects. Looking for a seasoned/experienced electrical engineer/designer/integrator with Client experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Job Description
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-690-100161
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineering Contractor

Description:
Unique Skills:
Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/ODA STC/MRA/TC projects. Looking for a seasoned/experienced electrical engineer/designer/integrator with experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus. Job Description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 100161
Job Location: Pooler, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: cort hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Components Engineer - Level 2

Location: Dallas, TX
Rate: $60.00 - $65.00/HR
1 year contract


** MUST have ability to obtain a Secret security clearance**

Description:
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


Skill/Experience/Education
Mandatory:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.
- Must have parts management experience working with designers to select components for use in designs.
- Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- Must have ability to obtain a Secret security clearance.


Desired:
- Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
- Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
 
Job Number: 7156
Job Location: Dallas, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

Description:
159492
MFC-1334
Components Engineer - Level 2
Dallas, TX
65/hr max
12 month contract
No Clearance

Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.
Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes
 
Job Number: JE-1334
Job Location: Dallas, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer III

Description:
This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole and will lead and direct the work of the team to accomplish department goals and fulfill customer needs. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:
The Design Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:
Applies standard engineering practices and techniques, including innovative methodologies, to provide effective solutions to problems involving a wide number of variables.
Review and understand customer’s Statement of Work (SOW), technical specifications, Interface Control Drawings, schedules and budgets.
Create/compile technical documentation that supports evolving/changing designs.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
Assist in producing engineering quotes to specifications or customer repair demands.
Create Service Bulletins, Repair Schemes and Service Letters that meet the customers’ modifications or repair needs.
Responsible for communicating with customers and suppliers, translating technical information and ensuring compliance to standards and requirements.
In-depth knowledge of standard concepts, practices, and procedures.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems that are complex in scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Provide direction and serve as expert resource to other department engineers and management team.
Function as an interface to ensure complete understanding of requirements, goals and constraints.
Document issues and communicate to necessary departments, evaluate potential problems and provide risk assessment. Follow-up to ensure that issues have been successfully resolved.
A wide degree of creativity and latitude is expected.
Participate in a variety of process improvement projects.
Will facilitate or lead teams.
Able to support design reviews with preparation and knowledgeable presentation of review material.
Directs work of others and acts as a lead.
Performs other duties as required.

Qualifications & Skills Requirements:
Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office and communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Zuken E3

Description:
Zuken E3 Design Engineer

My client is looking for Zuken E3 Design Engineers to convert cable drawing into Zuken E3. Location is the Denver Tech Center.

Start date is June 2017.

Job Description: Zuken E3 Design Engineer

My client is converting a large number of electrical drawings to Zuken E3. The client is looking for someone proficient in Zuken E3.

You should have experience with:

• Cable harnesses
• Wiring
• Schematics
• Aerospace is ideal

The rate is open. The initial project is 4 months with multiple projects to follow.

US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.

If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!
 
Job Number: mm170519cjZuken
Job Location: Centennial, CO
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 4+ months
Start Date: June, 2017
Input Date: 11/14/2020
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Michael Mendocha
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Release Engineer

Description:
Design Release Engineer

Location: Warren, MI

Description:
Design Release Engineer.
Candidate with strong interest in product design and excellent communication skills is needed to work on vehicle seating systems on GM programs.
The engineer will be responsible for supporting technical and program interactions with the customer platform team on a vehicle program. The engineer should have a strong technical background along with good program management skills. The engineer should have good communication skills - written and verbal, ability to balance conflicting requirements and risk, and ability to travel to customer and supplier manufacturing plants. A hands-on individual with a strong work ethic is needed to support project deliverables. The engineer needs to have good analytical skills and work effectively with customers / suppliers and the seating development team.

A 4 year degree in Mechanical, Electrical or Industrial Engineering is preferred.
Minimum 2 year Associate or Equivalent college diploma required.
Minimum 2 years prior work experience in automotive seating, interiors or in a product development role and or 1 year experience as a DRE in GM systems is required.
Some familiarity with CAD systems like Unigraphics and Catia an added plus.
 
Job Number: 17-08429
Job Location: Warren, MI
Per Diem: Yes
Duration: 5-6 Months
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Robin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMI Test Engineer (aerospace)

Description:
Role:EMI Test Engineer (aerospace)

Location: Salt Lake City, UT

Duration:6 months+

This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report.

The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160.

Bachelor of Science in Electrical Engineering preferred, minimum seven years’ experience.
 
Job Number: 51653
Job Location: Salt Lake City, UT
Duration: 6 months+
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMI Test Engineer in Salt Lake City, UT #4730AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: EMI Test Engineer
Job Number: 4442
Location: Salt Lake City, UT
Compensation: DOE
Assignment Length: 6 month contract w/ possible extension.

**Previous Aerospace Industry experience preferred**

This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report.
The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160. Bachelor of Science in Electrical Engineering preferred, minimum seven years’ experience.

Educational Requirement:

Must have BS/BA

HM manager notes!
HM- Carl
o BS Electrical Engineer preferred. Minimum 7 years’ experience.
o working in the EMI testing division that support 4-5 testing chambers
o There are peak times in which they need to run all 5 chambers.
o Currently working with custom automated test equipment (They will train on equipment)
o How to set up the test data and parameters and need someone who will know how to collect the test results.
o DO160 and Mil-STD 461 specs are being used for compliant testing measures –Mainly working with military & defense products
o Looking for candidates that can do the job with minimal supervision
o Hours: M-F 8am-5pm, possible OT and shift changes
 
Job Number: #4730AS
Job Location: Salt Lake City, UT
Rate: DOE
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
Applicant shall:
- Develop and maintain Electrical Wiring Interconnect System (EWIS).
- Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
- Must be capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services .

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7133
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
 
Job Number: 24-243
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer II

Description:
Engineer II – Electrical Applications

Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Long Term contract


Unique Skills:
- Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, back shells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.


Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 6826
Job Location: Savannah, GA
Rate: $40-$50
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Apps Engineering Contractor

Description:
Unique Skills:
Applicant shall: Develop and maintain Electrical Wiring Interconnect System (EWIS). Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements is required. Must be capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services.

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-695-93461
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
MUST BE A US CITIZEN

•Develop design drawings in either Microstation, AutoCAD and/or SmartPlant 3D
•Develop PLC panel designs
•Develop designs for instrumentation and power wiring
•Develop lighting and grounding designs
•Develop conduit and wiring designs
•Develop transformers, panels, and electrical room designs
•Develop specifications for electrical and instrumentation equipment
•Ensure designs meet NEC codes
 
Job Number: 39819
Job Location: TN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
EDUCATION: BS - Bachelor Degree of Science in Manufacturing Engineering, Mechanical Engineering, or Industrial Engineering.

EXPERIENCE: 1-3 years engineering experience in high tech environment with 3D modeling experience a plus. Specific electro-mechanical and vacuum systems experience also a plus.

JOB LEVEL: Ability to uses professional concepts, apply company policies and procedures to resolve a variety of complex issues.

JOB COMPLEXITY: Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors. Ability to use judgment, within defined procedures and practices to determine appropriate action.

SUPERVISION: Receives a moderate level of guidance and direction.

TECHNICAL ABILITIY: Pro Engineer, SAP, Agile, Lotus Notes, skills a plus must have Microsoft office skills.

INTERPERSONAL SKILLS: Works well in teams, comfortable with cross functional team presentations, ability to resolve issues between team members.

ACCOUNTABILITY: Self driving requires minimal day to day supervision. Follows defined guidelines.

JOB IMPACT: Improve efficiency of production. Identify errors/issues with manufacturing processes and assemblies.

PRODUCT KNOWLEDGE: Requires knowledge and experience in own discipline; still acquiring higher-level knowledge and skills. Builds knowledge of the company, processes, and customers. Solves a range of straightforward problems. Analyzes possible solutions using standard procedures.
Key Responsibilities
1. Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
2. Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
3. Estimates manufacturing costs determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
4. Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
5. Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
6. Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
7. Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
 
Job Number: 215458PS
Job Location: Gloucester, MA
Rate: $31-$43 per hour
Per Diem: NO Per Diem
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Jess McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -EWIS -Cabin interior monuments -Seats

Education/Experience
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-175
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Location: Orlando, FL
Rate: $35.00 - $65.00/HR
2 month contract
1st Shift


Description
- Conducts or participates in the research, design, development, and testing of COTS or custom computing hardware and/or other electrical components.
- Develops designs as the Hardware Architect f for the installation of components and assemblies into chassis, racks, cabinets, workstations, customer facilities, and/or shelters.
- Plans, directs, reviews and coordinates preparation of project documentation to ensure customer contract and company requirements are met.
- Prepares specifications, evaluates vendors, and analyzes test reports.
- The successful candidate will possess general knowledge in Circuit Design including Input and Output, Standard interfaces, Interconnects, and PWB design and manufacture.
- Candidate will possess the ability to implement designs and changes to designs under general guidance and direction.
- Candidate may have a general knowledge of test equipment and should posses good oral, written, and presentation skills.
- Candidate should be familiar with all phases of design specifically Cabinet design

Skill/Experience/Education
Mandatory:
- 6+ years of experience with Hardware/Interconnect design
 
Job Number: 7178
Job Location: Orlando, FL
Rate: $35.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 2 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: DOE ($40/hr - $45/hr)
Duration: 6+ month contract
Schedule: 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description
-Electrical design support will be required to support missile electrical architecture trade studies and concept design.
-Overall missile electrical design and particular focus for the control actuation system design is required.
-Candidate may need to work with component suppliers.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Skill/Experience/Education (Mandatory):
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
-Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
-Considered experienced, but still a learner.
 
Job Number: 7136
Job Location: Grand Prairie, TX
Rate: 40-45
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 / No Clearance / FPGA DO-254 test Hardware/Software verification and validation TX

Description:
Job Title: Electrical Engineer Level 3
Job Number: 159148/1363
Location: Grand Prairie, TX
Rate: 60/hr max
Compensation: 12 month contract
No clearance

Description:


Description
Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.
Skill/Experience/Education
Mandatory:

Electrical Engineering Bachelor of Science degree or similar experience.
10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
Strong understanding of requirements analysis, derivation, and verification.
Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.
Desired:

Hardware/Software verification and validation experience in a DO-254 or similar environment.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Hardware/Software Test Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report. 4-5 Years Yes
DO-254 of similar Firm understanding and experience with verification process for safety critical systems. 4-5 Years Yes
Programmable Logic Design Understanding of programmable logic using FPGAs. Ability to read and understand VHDL and SystemVerilog. 0-3 Years No
 
Job Number: DW-1363
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret PA

Description:
Electrical Engineer - Level 3
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Status of clearance is needed on resume.
Skill/Experience/Education
Mandatory:

Electrical circuit design, analysis, and documentation experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Firmware 0-3 Years Yes
Analog/digital design 4-5 Years Yes
Power circuit design 4-5 Years Yes
Mentor Graphics Experience 4-5 Years No

Special Needs
 
Job Number: DW-1377
Job Location: Archbald, PA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
Electrical Engineer - Level 3
Description
Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.
Skill/Experience/Education
Mandatory:

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

Skill Matrix
There is no skill matrix for this requirement
 
Job Number: JE-1228
Job Location: Grand Prairie, TX
Rate: 45/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
158440/1251
Electrical Engineer - Level 3
Grand Prairie TX
60/hr
Active Secret
12 months

Description
Analog engineer is required to design a power voltage card to convert voltages between mature subsystems. The power voltage card will need to fit within an existing space. This effort will require part selection, design review, and design release. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in Cadence; have good communication skills.
Skill/Experience/Education
Mandatory:

Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). Bachelors degree in Electrical Engineering with five or more years of experience. Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting. Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes. Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills. Proficiency with electronic analyzers and other trouble shooting tools is required. Ability to develop system and subsystem performance requirements. Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Circuit Design Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 9-10 Years Yes
 
Job Number: JE-1251
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power Systems

Description:
MUST BE ABLE TO OBTAIN A SECRET CLEARANCE - US CITIZENS ONLY

•Design medium voltage and 480VAC power systems
•Design wiring systems for motors, lighting, grounding, and lightning protection
•Specify electrical equipment
•Perform electrical power calculations and develop ETAP models with ARC flash studies, equipment sizing, and coordination
•Design systems which meet national electrical codes including hazardous locations
 
Job Number: 39817
Job Location: TN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 3 / no clearance / FPGA SystemVerilog TX

Description:
Job Title: Electrical Engineer Level 3
Job Number: 159069/1356
Location: Grand Prairie, TX
Compensation: 60/hr
Assignment Length: 12 month contract
no clearance
non exempt

Description:

Member of independent verification and validation team responsible for performing evaluation of requirements, design, implementation, test, and supporting documentation as an independent reviewer for an end product that requires NRC approval.

Skill/Experience/Education
Mandatory:

FPGA requirements analysis/derivation, design implementation, design verification, and integration and test.
SystemVerilog for design verification
Desired:

Producing hardware used in nuclear power plants.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

FPGA design/verification Familiarity with requirements analysis and derivation. Familiarity with design architecture and implementation. Familiarity with design verification, integration, and test. 4-5 Years No
SystemVerilog Familiarity with directed tests, constrained random verification. Familiarity with functional testing, code coverage, UVM. 4-5 Years Yes
 
Job Number: JE-1356
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr.

Description:
Electrical Engineer Sr.

Location: Marion, MA
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80
Travel: Mostly to Middletown, RI. Other locations could be anywhere, almost always CONUS.
**MUST have an ACTIVE SECRET CLEARANCE or have it turned on WITHIN 72 HOURS**

Description
-This business is in search of a highly skilled senior electrical engineering, (level 3) to join our team in Marion, MA. This role offers an exciting opportunity to join a top-tier employer known throughout the world for its engineering prowess, game changing product offerings, and robust solutions.
-The candidate will be a technical contributor for the Heavy-weight Torpedo (MK48 CBASS) Program, taking on the following responsibilities: production support, development, integration and test, qualification testing, etc.
-The person needs to have at least 5 years of experience developing, debugging, and supporting a production line for complex analog, or digital, or both electronic designs.
-Robust circuit design, analysis, simulation, functional testing, DVT, first article testing, and qualification testing will be performed.
-A wide variety of tasks will include working on an experienced EE Team, leading/directing technicians and junior engineers, performing component research, board level design and troubleshooting.
-The engineer will collaborate routinely with other engineering disciples.
-The candidate must be able to demonstrate a sustained history of many successful electronic designs.
-The engineer will write a variety of documents.
-A strong understanding of designing to withstand and succeed in environmental (thermal, vibration, humidity, etc.), electro-magnetic interference (EMI), and margin testing are part of the test scope.
-The candidate should possess a history of excellent performance reviews.
-Excellent multitasking skills are a must, as typically engineers here juggle several tasks/programs/ products simultaneously.
-The candidate must have excellent verbal and written communication skills and a strong ability to successfully work with customers, program management, engineering project managers, and within the multidisciplinary engineering and manufacturing teams.
-Some overtime and travel are required.
-In addition, the candidate will be involved with other strategic activities including bid and proposal writing, field demonstrations and testing, customer and internal management presentations.
-The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience as well as passion for analog and/or digital engineering.
-If the person is a digital specialist, considerable experience with programmable logic design is required.

Skill/Experience/Education (MANDATORY):
1. US Citizen 2. A security clearance 3. BSEE minimum
4. Outstanding ability to multitask
5. 5+ year history of complex design, testing, and troubleshooting skills and aptitude
6. Excellent written and verbal communication skills
7. The ability to work well in a team environment
8. Proficient with common laboratory engineering tools such as logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment
9. Mastery of MS Office suite
10. Board Design: Analog and/or Digital Board Design Experience (6-8+ years required)

Desired:
1. Matlab, expertise with environmental, designing to mitigate electro-magnetic interference (EMI), and margin testing are required. LabView and leadership experience.
2. If analog EE: PSPICE, experience designing front end Sonar Receivers and EPDM. Systems Engineering experience is desired..
3. If digital EE: Expertise with high speed digital and signal integrity practices;
 
Job Number: 7280
Job Location: Marion, MA
Rate: 40-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Job Title: Electrical Engineer
Job Number: 159158/0498
Location: Palmdale, CA
Compensation: 65-75/hr
Assignment Length: 12 month contract
Security Clearance Secret

Description:


Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating electrical harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents. .
Skill/Experience/Education
Mandatory:

Experience creating electrical architectures/schematics and electrical harness design. Experience using electrical harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.
Secret Clearance.
Desired:

Experience performing electrical load analysis and electrical power system integration
Experience with CATIA V5 Experience generating System Check Procedures and providing support Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics. 6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems. 6-8 Years No
 
Job Number: DW-0498
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Engineer

Description:
� Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
� Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
� Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Unique Skills:

7000 hours CATIA V5, Electrical Work Benches required

Experience/Education:

BSME/BSEE or equivalent experience
 
Job Number: 24-155
Job Location: Savannah, GA
Rate: $56 to $67 per hour
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 7231
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift


Unique Skills:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6951
Job Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term Contract



Unique Skills:
Applicant shall:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7031
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Engineer (Special Missions)

Description:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Unique Skills:
- 5000 hours of CATIA V5, Electrical Work Benches required

Experience/Education:
- BSME/BSEE or equivalent experience
 
Job Number: 24-167
Job Location: Savannah, GA
Rate: $58 to $63 per hour
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness installation Engineer

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-676-94842
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
Unique Skills:
Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Electrical Power Generation, control and indicating • Secondary Power Distribution, control and indicating • Solid State Electrical Power Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Project Management Skills/Experience: • Configuration change management
 
Job Number: 17-687-98101
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
Unique Skills:

Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Electrical Power Generation, control and indicating • Secondary Power Distribution, control and indicating • Solid State Electrical Power Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Project Management Skills/Experience: • Configuration change management
 
Job Number: 98101
Job Location: Pooler, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: cort hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Rate: $58.00 - $64.00/HR
Long Term contract


Unique Skills:
1) AutoCad required Catia V5 preferred
2) G650 and G500 electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7041
Job Location: Savannah, GA
Rate: $58.00 - $64.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Designer

Description:
Electrical Wire Harness Designer - Eng II

Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Long Term contract


Unique Skills:
- Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, backshells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 7078
Job Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors and Systems Engineering Contractor

Description:
Unique Skills:

Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - EWIS - Cabin interior monuments - Seats Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 102176
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors and Systems Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - EWIS - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-724-102176
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Mechanical Integration

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 19-836
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer

Description:
Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASASP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineering Contractor

Description:
Electronics Systems Engineering Contractor

Location: Savannah, GA
Pay Rate: $55/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Aircraft power / electrical / avionic systems design, integration and implementation.
-Design, certification and system support

Job description:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7054
Job Location: Savannah, GA
Rate: 55.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
Embedded S/W Engineer - Level 2
Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
Desired:

Driver Development, Python, ROS, CODESYS

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
COTS SBC 0-3 Years Yes
Linux (Red Hat) 4-5 Years Yes
VxWorks 4-5 Years Yes
Git 4-5 Years Yes
J1939 or CANBus Experience 4-5 Years Yes
Eclipse 4-5 Years Yes
Ground Vehicles and Autonomy Experience 4-5 Years Yes
Embedded SW Engineering 4-5 Years Yes
Driver Development 0-3 Years No
Python 0-3 Years No
CODESYS 0-3 Years No
ROS 0-3 Years No
 
Job Number: DW-1367
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
Embedded S/W Engineer - Level 2
Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: DW-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - 3/4/5 Cuda development VxWorks Linux Ubuntu CentOS Windows CA

Description:
17006478/1579
Embedded Software Engineer - 3/4/5

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Mar 27, 2017

Position: Embedded Software Engineer 3/4/5

Location: Redondo Beach, CA

Duration: 9 Months

Rate: open

Designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, aircraft flight control and display systems, pacemakers, defibrillators, mechanical and electrical systems. Interfaces with customers, suppliers, application users and other technical and support personnel.


Basic Qualifications:

Minimum 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

Cuda development

Embedded ARM processor developer
Embedded Power PC processor developer
Embedded Intel PC processor developer

Strong OS Experience:

Wind River VxWorks Versions 6 – 7
Wind River Linux Versions 6 -7
Yocoto Project Linux

Development Environment: OS:

Windows 7
Ubuntu 14 – 16
Red Hat Linux 7
CentOS 7


Preferred Qualifications:

Knowledge of Software development process
Knowledge in algorithms
Hardware Knowledge
 
Job Number: MB-17006478
Job Location: Redondo Beach, CA
Rate: open rate
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

Must have active / transferable Secret Clearance prior to submittal and shown on resume.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

Desired:

Domain Knowledge of Air and Missile Defense


Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: DW-1368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 2 - Secret

Description:
Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

REQUIRED EXPERIENCE:
Mechanical and or Electrical Engineer. C-Shift.
On aircraft and off-aircraft operational requirements.
Schedule In this role, The employee will review designs for ease of manufacturing and work closely with design engineering for improvements. The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions. This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists. The employee will work with manufacturing on issues and process improvements

PREFERRED EXPERIENCE:
Jobscope experience TeamCenter Engineering experience Production Engineering experience Production Operations experience Mechanical Experience Electrical Experience Aircraft Experience Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge.
Ability to read and interpret engineering drawings Excellent verbal and written communications skills

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5/40, 3rd Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 163269
Job Location: Lexington, KY
Rate: up to $35.00
Per Diem: Split PD possible
Overtime: Not specified
Duration: 3 mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III / Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines CA

Description:
Job Title: Engineer III
Job Number: 159153/4155
Location: Irvine, CA
Compensation: 50-60/hr
Assignment Length: contract


Description:


Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.)

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-4155
Job Location: Irvine, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III( RTCA/DO-178B development and verification) in Irvine, CA #4155AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Engineer III
Job Number: 4155
Location: Irvine, CA
Compensation: DOE
Assignment Length: 6 month contract

Description:
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Key Skills / Qualifications:
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

Key Requirements for the job:
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: #4155AS
Job Location: Irvine, CA
Rate: Open, DOE
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical Design - 5 with active secret / NX FL

Description:
1582
Engineer Mechanical - 5 (Job Number: 17007853)

Number of Openings: 1

Location(s): United States-Florida-Melbourne

Shift: 1st Shift

Target Start Date: Jun 5, 2017

Subsystem Design Engineer -5 (multiple openings)

Rate: $70/hr.

Work Week: 9/80

Duration: 1 year

Active Secret clearance required to start


The candidate must have a DoD Secret Clearance that has been established or renewed within the last 6 years. Final offers are contingent upon SAP award.

Utilizing Siemens NX 10, the candidate will be responsible for designing detail parts, assemblies and installations associated with fixed-wing aircraft ECS, Fuel, Fire protection, Secondary Power, Electrical subsystems, mechanisms and Hydraulics subsystems.

Responsible for the development and integration of various aircraft ECS components including ducts, manifolds, plenums.

Responsible for the development and integration of aircraft fuel and hydraulic system components including valves, filters, reservoirs, mechanical lines, machined and sheetmetal detail parts.


Basic Qualifications:

14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education.


Preferred Qualifications:

Siemens NX or Teamcenter experience.
 
Job Number: MB-17007853
Job Location: Melbourne, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer- Electrical 2

Description:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required. QUALIFICATIONS: Bachelor’s of Electrical Engineering with two years of engineering experience, Master’s of Electrical Engineering with no prior experience, or similar degree background. Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014. It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus; some travel may be required. U.S. Citizenship required.
 
Job Number: 02
Job Location: Pascagoula, MS
Rate: Hourly
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Carrie
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 985/872-5530
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
UNIQUE SKILLS
Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing. Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-677-95941
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
- Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
- Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
- CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7224
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F6-ELEC. FLT CNTRL/SIM. LABS-Grade 07

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

PLEASE READ
If selected the supplier must provide verification of the candidate’s completion of Lock Out/Tag Out training and certification prior to start of assignment.
Certification can be obtained via http://www.compliancetrainingonline.com/lockout_tagout.cfm.
 
Job Number: 17-711-1396
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Maintenance Workers - Goodyear, AZ

Description:
STS AeroStaff Services is currently hiring Facilities Maintenance Workers for open positions in Goodyear, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To perform duties related to the maintenance repair and monitoring of physical plant and grounds as directed by the Facilities Team Leader.

Job Duties:

• The maintenance and upkeep of the plant grounds and equipment
• Responsible for inspection of fire extinguishers
• Should be able to assist with electrical, plumbing and HVAC work
• Accountable to the Facilities Team Leader for daily work assignments

Qualifications:

• High school diploma or equivalent
• Minimum four (4) years’ in all building maintenance trades
• General custodial experience
• Must be able to read blueprints
• Must be on 24 hour call seven days a week
• Have complete set of tools
• Valid driver’s license
• Read, write, and speak the English language

Physical Requirements:

• Physically able to bend, stoop, kneel, stand for prolonged periods of time, walking, climbing ladders and stairs
• Normal or corrected hearing and vision are required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38619
Job Location: Goodyear, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Service Engineer / Technician

Description:
* Candidates should be local to Imperial, CA 92251 or El Centro, CA 92243and open to traveling

Job Description:
The Field Service Engineer (FSE) will be responsible for the inspection, evaluation, diagnosis, maintenance and repair of the systems to ensure the fleet operates at optimal capacity.

Candidates must have a strong background in either:

A. Electronics and Information Technology with significant troubleshooting and repair experience on computer software and hardware driven ISR (intelligence, surveillance, reconnaissance) collecting systems. The FSE will collect field failure data, develop test procedures, execute tests, and consult with design engineers as necessary to remedy problems and drive necessary design changes. The FSE will also execute established acceptance test procedures to validate repairs were successful.

B. Electrical and Electro-Mechanical Systems with significant troubleshooting and repair experience on ISR (intelligence, surveillance, reconnaissance) collecting systems. The FSE will collect field failure data, develop test procedures using schematics and wiring diagrams, execute tests utilizing standard test instruments and hand tools, repair the system, and then validate repairs by using established acceptance test procedures.

Additionally the FSE shall perform system and sub-system testing as necessary to proactively identify issues that could occur during field deployment of the system, and coordinate and assist design engineers in developing solutions to these problems. The work activities will be performed in a shop environment.

Requirements:
> Receive training in the company?s manufacturing facility to understand the production, troubleshooting, and maintenance of the integrated surveillance product?s mechanical, electrical, and software subsystems.
> Perform the advanced troubleshooting and depot level maintenance to ensure prompt repair and achievement of contractually obligated operational availability metrics.
> Maintain a log of repair actions and incidents. Identify recurring issues where design or software modifications could lead to improved system availability and reduced maintenance costs, and prepare preliminary proposals for such modifications for review and discussion with the system design team.
> Verify accurate tracking of inventory.

CORE COMPETENCIES:

> Efficiency: Produce significant output with minimal wasted effort.
> Honesty/Integrity: Earns trust and maintains confidence. Does what is right.
> Organization & planning: Plans, organizes, schedules, and budgets in an efficient, productive manner. Focuses on key priorities.
> Attention to detail: Does not let important details slip through the cracks or derail a project.
> Flexibility: Adjusts quickly to changing conditions.
> Enthusiasm: Exhibits passion and excitement. Has a can-do attitude.
> Acts with a sense of urgency: Does not put off until tomorrow what can be accomplished today.
> Follows-through on commitments: Lives up to verbal and written agreements, regardless of personal cost.
> Proactivity: Acts without being told what to do.
> Teamwork: Reaches out to peers and cooperates with supervisors to establish an overall collaborative working relationship

EDUCATION / EXPERIENCE: (Qualifications and/or Requirements)

> Field Service Engineer requires a Bachelor�s degree in Engineering, Computer Science, Systems, or related technical discipline plus a minimum 5 years of experience
> Field Service Technician requires either an Associate�s degree in Engineering, Computer Science, Systems, or related technical discipline plus a minimum 5 years of experience OR a minimum 8 years of experience.
> Supporting systems for the defense industry or Customs & Border Patrol industry is a plus.
> Prior military experience or Customs & Border Patrol experience is a plus.
> U.S. Citizen only


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 012_2017
Job Location: El Centro, CA
Rate: DOE
Per Diem: Split Possible
Overtime: YES
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer-Stability & Control

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years’ experience in flight sciences, including:

Stability & Control
Aircraft Performance
6DOF Flight Simulation
Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HiL Technician

Description:
HiL Technician

Location: Morrisville, NC
Duration: 1 year

Description:
Develops and evaluates new technologies or methods (mechanics hydraulics algorithms software etc.) Plans and executes engineering work for product validation and verification of significant parts of major projects or complete projects with well defined objectives. Responsible for problem identification and resolution corrective action tracking reliability analysis and verification/validation test plan development. Is a member of a product/project team. Provides guidance on test procedures to engineers and support personnel.

Duties:
Designs schedules and performs field and/or lab tests to validate new product designs. Analyzes complex test data draws conclusions and summarizes reports acting as liaison between the Product Verification & Validation (PV&V) dept and product engineering. Performs analyses of customer data (i.e. warranty Dealer Technical Assistance Center (DTAC) customer satisfaction surveys Early Detection Problem Resolution (EDPR)). Plans and performs analytical and experimental work to obtain undefined operating loads and/or develop new test procedures. Gives work direction to test operators. Assists in developing and coordinating changes to product definition documents. Coordinates problem identification activities and tracks corrective action progress.

Specific Position Requirements:
Performs software functional tests by manually following test instructions and running automated tests. Uses basic troubleshooting skills to identify root cause of test failures. Accumulates and reports test results to Software Engineers and assists them in determining reason for failures. Provides improvement suggestions for the software functional test to Software Engineers. Writes basic scripts for automated software functional tests given manual software functional tests and variables defining inputs and outputs.

Responsibilities:
- Accountable for verification test execution on Hardware in the Loop testing
- Test traceability to requirements (linking a test to a requirement using defined methods)
- Provide necessary data to track metrics defined by the Software Performance Engineer
- Assists with manual tasks for test stand setup (i.e. load box wiring, harness creation, troubleshooting, etc.)

Requirements:
- Ability to read schematics and wiring diagrams
- Proficiency with digital multimeter, oscilloscope, and function generator
- Understanding of AC and DC circuits
- Basic wiring skills
- Solder, crimping, electrical components
- Basic mechanical skills
- Hand tools, power tools
- Software: Matlab/Simulink, C/C++, Python or similar programming language
- CAN communication knowledge
- Positive Attitude, Honest and a Good Attendance Record
- Good written and oral communication skills.
 
Job Number: 17-09025
Job Location: Morrisville, NC
Per Diem: possible
Overtime: possible
Duration: 1 year
Start Date: 6/1/17
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Test Engineer CA

Description:
Job Title: Hydraulics Test Engineer
Job Number: 159152/4000
Location: Irvine, CA
Compensation: 50-55/hr
Assignment Length: contract


Description:


Must have Hydraulic test background and technical writing ability. Perform Qualification testing. developing test procedures, lead test technicians to conduct testing and prepare test reports.

Analyzes, researches, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Designs products or systems of diverse/difficult scope and complexity using engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.). Develops and recommends solutions to a variety of complex engineering requirements to ensure that design objectives are met. Projects at this level are assigned to develop in-depth knowledge and skills and to build knowledge of the organization, processes, and customers.

· Bachelors degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline. Masters degree (MS preferred. Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience.
· Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise.
· Demonstrated ability to investigate and implement new technologies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.
 
Job Number: JK-4000
Job Location: Irvine, CA
Rate: 50-55/hr
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2

Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
6+ month contract
1st Shift

**Must have an active SECRET clearance**

Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education
Mandatory:
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
- Must be able to obtain and maintain a DoD Secret level security clearance.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 7085
Job Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer UT

Description:
4648
Manufacturing Software Engineer
Position location: Salt Lake - UT
Maximum Hourly Pay Rate: 60
Shift: 1st
Start Date: 05/01/2017
Tentative End Date: 11/01/2017
OT exempt: No
Minimum Years of Experience: 3 Years
Education Requirement: BS/BA

Job Description
Function: Reporting to the Engineering Manager, this position is responsible for the design, implementation, verification and validation of software used in manufacturing.
Essential job functions: • Execute software design, implementation and code review.
• Create software unit test, verification and validation documentation.
• Conduct software unit test, verification and validation.
• Software version control and defect management.
Required skills: • Computer Science degree or equivalent and 3+ Years experience.
• Experience with C#/SQL/Visual Studio (be able to understand/generate classes and convert to/from C).
• Ability to analyze source code and generate documentation that provides clear and concise view of structure and data flow.
• Experience with test equipment in a manufacturing environment is a plus.
• Experience with writing code that interfaces with serial devices via RS232 and/or USB is a plus.
• Experience in medical device manufacturing environment is a plus.
• Excellent communication skills, both written and verbal while being enthusiastic, motivated and self-driven.
• Flexibility in task assignment, willingness to switch tasks as needed based on a fast moving work environment.
Scope:
Education: • A Bachelor's degree in computer science or software engineering or electrical engineering or equivalent experience is required.

Other Requirements
New Position open at the Moog Zevex location:
4314 Zevex Park Ln, Salt Lake City, UT 84123
 
Job Number: MB-4648
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: Length of Assignment: 6-Months to start, possible extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Mechanical Design Engineer - Level 2

Location: Dallas, TX
Rate: $50.00 - $60.00/HR
6 month contract
1st Shift

**Must have a current ACTIVE secret clearance**

Description
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


Skill/Experience/Education
Mandatory:
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 6908
Job Location: Grand Prairie, TX
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
The Big Picture – Top Skills You Should Possess:
• Wanting to world for a company with implements cutting edge design.
• Centers on new product development and is part of a new global project
• Heavy hitter within the semiconductor experience
• Must have Creo

What You’ll Be Doing:

• Designing, implementing, and verifying complex mechanical subsystems in large scale capital equipment.
• Projects will include New Product Development and Continuous Improvement, and will be a team approach with Electrical, Software, and other Mechanical Engineers.
• The successful candidate will enjoy a fast paced environment filled with technical challenges.
• Execution of all project phases from conceptual designs through detailed design, prototype part procurement, development test, reliability test, and release to manufacturing.
• Delivery of technical presentations
• System level design to integrate multiple subassemblies into major machine level assemblies.
• Lead a subsystem design effort including specifications, design, and analysis
• Design of mechanical parts (vacuum chambers, frames and support structures, motor controlled mechanisms, etc.) and assemblies using 3D CAD.
• Analysis (GDT, structural, heat transfer, etc.) of mechanical parts and assemblies.
• Documentation of mechanical parts and assemblies for release into medium volume production systems.
• Evaluation of designs for cost and manufacturability performance

What You Must Bring to the Table:
• BSME or equivalent with a minimum of 7 years related experience.
• Experience in 3D Computer-Aided Design using Pro/Engineer Creo, PDM Link
• Finite Element Modeling/Analysis tools (ANSYS, Auto Desk, Pro/Mechanical, MathCad, etc.)
• Strong theoretical background in mechanical engineering disciplines – structural, heat transfer, mechanism design, fluid systems, and system-level integration
• Professional or laboratory “Hands-on” experience in a product manufacturing environment
• Knowledge of test and verification techniques; including data analysis
• Ability to work with limited supervision and work within diverse, cross functional development teams
• Experience in designing complex systems/subsystems in any of the following fields is a plus: large capital equipment/industrial machine design, defense, aerospace, semiconductor equipment, and/or sophisticated medical equipment.
 
Job Number: 243541PS
Job Location: Gloucester, MA
Rate: $40-65 per hour
Per Diem: NO Per Diem
Overtime: YES
Duration: 18 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Jess McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Description: Responsible for the design, coordination, and conduct of structural and operational tests on all Textron Aviation models.
Will be required to interact and coordinate test activities with other disciplines within engineering.

Other responsibilities include operation and configuration of computer controlled loading systems.

Requirements: Required Education:
Candidate must be a graduate of an ABET accredited Engineering School, culminating in a BS or MS degree in Mechanical/Aero/Electrical Engineering.

Must be able to design structural steel setups and loading fixtures using CATIA.
Knowledge of servo-hydraulics and closed loop theory helpful.
 
Job Number: 75428
Job Location: Wichita, KS
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Mechanical Engineer - Level 2

Location: Lexington, KY
Rate: $20.00 - $35.00/HR
3 month contract
Shift: 3rd Shift

**MUST have an active Secret Clearance or have had one with the last 2 years**

Description
- Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
- Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
- Mechanical and or Electrical Engineer.
- C-Shift (3rd Shift).
- On aircraft and off-aircraft operational requirements.
- Schedule In this role, the employee will review designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements
- Active Secret Security Clearance within the last 2 years.

Desired:
- Jobscope experience
- TeamCenter Engineering experience
- Production engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Aircraft Experience
- Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7408
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Mechanical Engineer - Level 2

Location: Lexington, KY
Rate: $20.00 - $35.00/HR
3 month contract
Shift: 3rd Shift

**MUST have an active Secret Clearance or have had one with the last 2 years**

Description
- Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
- Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
- Mechanical and or Electrical Engineer.
- C-Shift (3rd Shift).
- On aircraft and off-aircraft operational requirements.
- Schedule In this role, the employee will review designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements
- Active Secret Security Clearance within the last 2 years.

Desired:
- Jobscope experience
- TeamCenter Engineering experience
- Production engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Aircraft Experience
- Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7409
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Optical Engineer

Description:
Optical Engineer

Location: Bothell, WA
Pay Rate: DOE ($56.20/hr - $58.50/hr)
Duration: 6+ month contract
Shift: First, 9/80
*Must be a U.S. citizen*

Description
• BS Degree in Optical Engineering, MS or higher preferred
• Experience working in an optical development lab
• Experience with fiber optic laser systems including fiber handling and splicing
• Experience designing and building free space optical diagnostic set ups
• Experience characterizing lasers

Skill/Experience/Education (Mandatory):
1. Must have 4-5 years’ experience in the design and build of Fiber Lasers.
2. Must have 4-5 years’ experience in Laser characterization.
3. Experience working in an optical development lab
4. Knowledge of optical principles
5. General familiarity with standard optical and electrical lab equipment
6. BS Degree in Optical Engineering, Physics or other Engineering degree with a concentration on optics, MS or higher preferred;
7. Optical Design: Ability to design an optical layout selecting the correct optical elements and positioning them correctly in the design. Use of fundamental principles of optics. (4-5 years)
8. Laser Engineering: Ability to design a laser system and characterize the resulting beam. (4-5 years)

Desired:
• Experience designing and building free space optical diagnostic set ups
• Optical Analysis: Ability to analyze an optical system using Zemax, Code 5 or similar software packages.
 
Job Number: 7146
Job Location: Bothell, WA
Rate: 56.20-58.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer / Electro-Deposition Plating

Description:
Process Engineer / Electro-Deposition Plating

Location: Canoga Park, CA
Rate: $50/hr - $55/hr
Duration: 1 Year Contract

** Candidates should have current experience with Electro-Deposition Plating **
** Local candidates preferred. If candidates pass a phone interview an in-person interview will be required. Must be able to attend an in-person interview at their own expense **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Applies engineering and quality procedures to support hardware requirements to assure that delivered products and/or services conform to contractual and Company requirements.
-Support the electro-deposition of development hardware to support critical program schedules.
-Select and position electrodes /anodes, part and assemblies in process tanks to apply plating on metallic components.
-Be able to hand prep (sand) and mask hardware to ensure plating process meets specification and drawing requirements.
-Plan proper grouping and positioning of material to assure treatment to specifications.
-Maintain plating bath composition, temperature, and concentration.
-Have a basic electrical knowledge of electrical circuitry – anodic/cathode – positive/negative.
-Ability to calculate surface areas and determine current density for hardware.
-Knowledge in electroforming - ability to design and fabricate plating cells, shielding, and anode placement.
-Have experience working with hazardous chemicals and acids.
-General tool knowledge of power tools and hand grinders.

Skills:
-Over 5 years of experience in plating metallic parts & assemblies.
-Experience working with hazardous chemicals, including acids.
-A proven safety record & experience with PPE used in plating.
-Basic electrical knowledge: electrical circuitry, positive/negative, anode/cathode placement, AC/DC power supplies, rectifiers.
-Experience preparing hardware surfaces for plating and fabrication/installation of tooling & shields to ensure parts meeting plating requirements.
-Over 10 years of experience in plating metallic parts is desired (not required).

Education:
-High School Diploma or equivalent required.
-BS in Chemistry or Materials desired.
 
Job Number: 7072
Job Location: Canoga Park, CA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II - Electric Propulsion

Description:
Project Engineer II - Electric Propulsion

Location: Redmond, WA
Rate: $50.00 - $53.00/HR
1 year contract

** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **
** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **
** Candidates should have recent work experience **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Company is the premier supplier of these enabling propulsion systems.

- The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products.

- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.

The following is an approximate split of typical duties:
70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify company products are in compliance with customer requirements. Demonstrate to our customers that company is the best value supplier for their propulsion needs.
20% - Support proposal activities and manage internal research and development efforts as assigned.
10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions.

- Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.

Skills:
Required:
- At least 2 years work experience in an aerospace field, working on flight hardware.
- Must know MS Office programs.
- Must have minimum BS degree in mechanical or aerospace engineering.

Desired:
- Experience with electric propulsion devices, particularly hall thrusters or ion engines.
- Experience with testing flight hardware and production of flight hardware.


Education:
- A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required.
- A Master's degree or higher in an Engineering discipline or Physics is preferred.
- Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
 
Job Number: 6995
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II - Propulsion / ** Candidates should have propulsion experience. Chemical propulsion, electrical propulsion, or plasma physics are acceptable ** URGENT WA

Description:
Job Title: Project Engineer II
Job Number: 158323/6312522
Location: Redmond, WA
Compensation: 53/hr
Assignment Length: 12 month contract

Description:


Duties:
** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **



** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **



** Candidates should have recent work experience **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role ** ** Candidates should have recent work experience ** ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Aerojet is the premier supplier of these enabling propulsion systems. The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters. The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware. The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products. Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals. Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations. The following is an approximate split of typical duties: 70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet is the best value supplier for their propulsion needs. 20% - Support proposal activities and manage internal research and development efforts as assigned. 10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions. -Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.
Skills: Required: At least 2 years work experience in an aerospace field, working on flight hardware. Must know MS Office programs. Must have minimum BS degree in mechanical or aerospace engineering. Desired: Experience with electric propulsion devices, particularly hall thrusters or ion engines. Experience with testing flight hardware and production of flight hardware. Keywords: Electric propulsion Hall Thruster Ion thruster Arcjet
Keywords:
Education: A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required. A Master's degree or higher in an Engineering discipline or Physics is preferred. Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
# of Positions: 1

Location:
Redmond, WA
11411 139th Place NE,

Schedule:
Start Date: 02/20/2017
Estimated End Date: 02/20/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
Standard Schedule:
Schedule Notes: 9/80 Schedule. OT possible.
 
Job Number: MB-6312522
Job Location: Redmond, WA
Rate: 53/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Quality Assurance Engineers needed to develop, modify, apply and maintain quality evaluation and control systems and protocols for processing materials into partially finished or finished hardware on highly complex electro-optical, electronic & mechanical spaceflight assemblies. Works under general supervision. Follows established procedures. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy. Duties more specifically include the coordination of support activities across multiple programs that range from inspections, associated with incoming material and build of assemblies, to review of test setups against procedure and data against pass fail criteria. Interface with customer quality representatives for build and test activities. Participate on Material Review Board and Failure Review Board meetings; provide drawing reviews, test procedure reviews and customer interface to these activities. Insure design modifications or updates meet all quality requirements while sitting as a member on the Configuration Control Board. May coordinate supplier support across multiple programs and will travel to suppliers to perform hardware inspections.

Required Experience
5-8 years of quality engineering experience on spaceflight programs or MS degree with 3-7 years of quality engineering experience • Must be able to be certified to NASA-STD-8739.1, 2, 3 and 4 or have current certifications • Willing to work periodic on-call support over off-shifts, weekends and holidays • Willing to work different shifts as needed throughout the year • Willing to travel to suppliers 2-4 days at a time 5 – 10 times/year • Considerable knowledge of quality control methods and procedures, military specifications as they apply to the electronics industry, reliability requirements of electronic, mechanical and electromechanical equipment and surveillance methods and procedures. • Basic knowledge of manufacturing, materials, contract administration, industrial, test and design engineering.

Desired Skills
• Experience with TipQA • Familiar with Configuration Control Management • Efficient with GD&T • Previous experience managing accounts • Small team leadership experience • Experience with performing Failure Analysis (FA) utilizing the necessary electrical tests and measurements, plus many of the advanced analytical techniques of physics, metallurgy, and chemistry
 
Job Number: AG-NJ-HAR
Job Location: Clifton, NJ
Rate: 50-65/hr DOE
Per Diem: Split
Overtime: Yes
Duration: 6-12+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy Gill
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineer

Description:
Seeking a RF Engineer for an opening in Mason, OH.

RESPONSIBILITIES:
Currently seeking an RF Engineer (Contractor) with a broad range of experience that supports the analysis, design, implementation, optimization, and enhancement of RF equipment for launch vehicle and satellite communication systems. The successful candidate needs an understanding of detail design issues involved with RF design for mixers, filters, low-power driver amplifiers and power amplifiers for S-band and X-band frequencies. The individual will use simulation tools such as Microwave Office as well as RF test equipment. The individual will apply knowledge of component-level design for transistors, filters, mixers, oscillators and RF switches and will use test equipment to measure S-parameters, noise figure, intercept point, compression point, switching speed, and phase noise on electrical circuits and integrated assemblies.
• Design prototypes and provide sustaining engineering support for custom RF assemblies and sub-systems to customer specifications.
• Design, test, and troubleshoot RF sub-systems, integrated RF assemblies, and components through use of circuit analysis tools such as MWO.
• Evaluate, develop, and document new circuit and/or design techniques.
• Guide technicians on test, tune, debug, and optimization of prototype circuits and components to meet specification requirements and manufacturing requirements.
•Ability to plan effectively using various scheduling tools, flexibility and adaptability to changing priorities and assignments, ability to maintain confidentiality.

REQUIRED EXPERIENCE:
• Five (5) years of related experience in designing, testing and troubleshooting RF sub-systems and integrated RF assemblies and components is required.
• Experience with RF design for circuits such as synthesizers, oscillators, mixers, filters, drivers and power amplifiers at S-band and/or X-band frequencies.
• Working knowledge of analog electronics, detailed design knowledge of RF theory and application, knowledge of RF test procedures.
• Ability to use Microsoft Office applications, knowledge of circuit computer aided circuit design tools and circuit simulators (such as Microwave Office, Pspice, Mathcad, Matlab).

ADDITIONAL EXPERIENCE:
Aerospace experience, especially working with flight critical systems desired.

EDUCATION:
Accredited bachelor’s degree in Electrical Engineering or a related engineering degree is required. A master’s degree is preferred.

WORK SCHEDULE
1ST SHIFT
9/80 WORK WEEK
 
Job Number: 163209
Job Location: Mason, OH
Rate: $50.00
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer-FLA.

Description:
Job Duties:

Support daily event entry into FRACAS database via review of operations, test logs and NAVAIR maintenance databases; capture event evidence via interviews with maintainers, pilots, Marine maintainers, photos, test/data logs, etc. Ensure tagging/isolation of parts for Root Cause /Corrective Action analysis via working with Quality and IPT members and to ensure proper component disposition prior to return to Supplier / Sikorsky.
Support daily joint preliminary-scoring with NAVAIR team members.


Skills and Experience:

- A.S. degree in Mechanical, Electrical or Aerospace Engineering, preferred but not required and may be waived if candidate has suitable practical experience, such as the following:
- Previous commercial A&P or military aircraft maintenance preferred, previous experience in aircraft test operations support. Military maintenance background on H-53 aircraft is also preferred.


- Must be comfortable building relationships with customer and hourly-workforce.

- R&M FRACAS experience preferred, but is not required. Must be a self-starter and work independently.

- Skill level capable of performing tasks required to support the FRACAS program. Experience in failure analysis methodology and aircraft maintenance and hardware is required.

- Experience in parts management and provisioning and failure mode recognition.

- Candidate should possess excellent written and oral communication skills and must require a minimum of supervision.

- Computer familiarity with Microsoft Word, Excel, PowerPoint, Picture Manager (or similar photo imager tool) and Outlook.

Additional Requirements:



- Position may require some overtime and/or support of second or third shift and/or occasional weekends in support flight test and maintenance schedules.
 
Job Number: 38218
Job Location: Jupiter, FL
Per Diem: yes
Overtime: possible
Duration: 12 mos
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SH-Tech Pubs-GSE-2.Experienced

Description:
SUMMARY
This position involves the design/modification of tooling and peculiar ground support equipment (GSE) required for VH-92 / S-92 aircraft maintenance, and the validation / 'fit check' of each designed/modified item. In addition to design work, this position will also involve support of the logistical requirements associated with all design work and contract requirements, as well as sustainment support throughout the duration of the contract.

THE FOLLOWING OUTLINE THE NORMAL SCOPE OF WORK ASSOCIATED WITH THIS POSITION
- Coordinate with VH-92 GSE IPT Lead to support all GSE engineering related requirements.
- Design support of new peculiar support equipment (PSE)
- Support Engineering change proposals (ECPs)
- Support all drawing updates requirements/revision control for existing GSE
- Validate newly designed GSE
- Evaluate COTS items from our suppliers as needed.

REQUIRED SKILLS
- Must be able to work with CATIA V5. MatrixOne knowledge is desired. Cadra and Catia V4 knowledge is beneficial.
- A practical knowledge of and experience with maintenance tools (e.g. aircraft and/or auto repairs)
- A working knowledge of statics and dynamics (Mechanical Engineering)
- A general understanding of material strengths and properties
- Electrical/hydraulic design capabilities are beneficial.
 
Job Number: 17-697-1626
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
* Looking for a “mechanical” candidate, not electrical. There should be familiarity with equipment (i.e. drill presses, rivet guns, etc.).
* Primarily searching for experience with engines, as this candidate will be tearing down aircraft engines and preparing for rebuild. Mechanical assembly can be considered, but focus is on Aircraft/Military/or possibly automotive engines.

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 020_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: +/-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
 Looking for a “mechanical” candidate, not electrical. There should be familiarity with equipment (i.e. drill presses, rivet guns, etc.).
 Primarily searching for experience with engines, as this candidate will be tearing down aircraft engines and preparing for rebuild. Mechanical assembly can be considered, but focus is on Aircraft/Military/or possibly automotive engines.

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 015_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Our software teams employ an Agile Scrum process to rapidly design, code, and integrate capabilities on a continuous basis into a mature solution for our customers.
We strive for technical excellence by drawing upon a diverse workforce whose knowledge base covers the complete spectrum of modern computing languages and platforms.

The successful candidate will be integrated into a small to medium sized software team involved in all phases of the Software Development Life Cycle.
This will include development of new capabilities and features, as well as maintenance of the existing product line. Our software applications are developed using real-time embedded C++ running on a variety of computing platforms running Linux/Unix operating systems.

Our software is developed and delivered incrementally using Agile development methods, including Scrum, automated testing and continuous integration. The candidate will be an active participant on the Scrum team, performing development tasks independently. This successful candidate will employ their understanding of real-time software design to recognize the performance implications associated with specific detail implementations.

Required Skills:
• 3+ years’ experience all phases of Software Engineering including requirements, design, code, test and integration
• 3+ years’ experience with C++
• 2+ years Linux or Unix experience
• Real-time software development experience
• Experience developing software in a team based development environment, preferably Agile/Scrum

Desired Skills:
• 3+ years’ experience with Java
• 3+ years’ experience with Rhapsody
• Excellent verbal and written communication skills
• Experience in Agile development methods, including Scrum, automated testing, static code analysis and continuous integration
• Knowledge of or experience with UML, service oriented architectures, database design/implementation, model driven development, real time and/or embedded software, communications methods and protocols, and system security-hardening
• Radar domain knowledge
• Familiarity with the following Software Tools: ClearCase, ClearQuest and Team Concert, Jenkins, Coverity, Eclipse, DOORS
• Master's Degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software Engineering

Required Education (Including Major):
• BS degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software Engineering
 
Job Number: 38104
Job Location: St Petersburg, FL
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III (10 OPENINGS) - (MO)

Description:
ACTIVE INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO) - INTERIM SECRET

Description:
INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Aircraft Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWIIIMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III / Proficiency with RTCA/DO-178B development and verification CA

Description:
Software Engineer
Irvine, CA

Position Description

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).
Duties and Responsibilities

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).
Duties and Responsibilities

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience. · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies. · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages. · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes. · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment. · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


* Special Requirements:

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-4114
Job Location: Irvine, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
AERO REQ 0390 158300
Title: Software Engineer-N
Work Location: Palmdale, CA
Start Date: 02/13/2017


Job Description:
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance.


Mandatory Skills:
Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance.


Desired Skills:
Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
 
Job Number: JE-0390
Job Location: Palmdale, CA
Rate: 65-70/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
AERO REQ 0392 158396
Software Engineer-N
Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements.
Skill/Experience/Education
Mandatory:


Current SECRET clearance
MATLAB/Simulink;. Significant Flight Controls and Flight Simulation experience. Complex organization and documentation skills are required Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
 
Job Number: JE-0392
Job Location: Palmdale, CA
Rate: 65-70/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

- Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
- Typical responsibilities include:
1. May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
2. Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
3. Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
4. Represents the organization in conferences to resolve important questions and to plan and coordinate work.
5. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
6. Develops solutions to complex problems which require the use of ingenuity and creativity.
7. Work is reviewed at extended intervals for desired results and achievement.
8. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills:
- Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
- Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
- Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).

Education:
- Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
- Advanced degree desirable.
- Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: 7022
Job Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer with active secret / rocket propulsion URGENT FL

Description:
Job Title: Specialist Systems Engineer
Job Number: 158427/6405294
Location: Jupiter, FL
Compensation: 68/hr
Assignment Length: 6 month contract
Active Secret Required

Candidates needed with Secret Clearances for these 3 openings! Manager said that he needs candidates with primarily Hardware experience. A lot of the candidates so far have had primarily Electrical experience rather than Hardware experience.

** Candidates must have dedicated Hardware experience (not looking for Software or Electrical engineers) **

Job Title: Specialist Systems Engineer IV


Remaining Positions: 3

Duties:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **


Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.


-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates

requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills:
Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
Education:
Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
Advanced degree desirable.
Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: MB-6405294
Job Location: Jupiter, FL
Rate: 68/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Level Integration and Verification Testing - 7 openings CA

Description:
Job Title: Engineer III
Job Number: 159007/3947
Location: Irvine
Compensation: 45/hr
Assignment Length: 6 month contract

Description:

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc.).

1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.
3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.
4. General knowledge of other related engineering and technical areas.
5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

? Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
? Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
? Perform System level Integration and Verification Testing

Key Skills / Qualifications:
1. Bachelor’s degree in Mechanical, aerospace or electrical engineering or a related technical discipline. Demonstrated ability to perform the essential functions of the job typically acquired through 3 or more years of related experience.
2. Experience with flight control system integration and verification activities; including requirement reviews, test procedure development, automated test script development, test planning/execution and test reporting.
3. Familiar with test automation tools, processes, procedures and standards (DO-178, ARP4754) to support integration and verification activities.
4. Familiar with System and LRU troubleshooting and root cause analysis.
5. Strong communication and interpersonal skills required to coordinate cross functional activities to achieve common goals.

Key responsibilities:
1. Supporting development of Flight Control System Integration and Verification tests; including development of functional and requirement based test procedures, generation and debug of test and post processing scripts.
2. Supporting execution of Flight Control system Integration and Verification tests to support commercial aircraft SOF and certification, including conducting informal (dry-run) and formal test executions, test reporting generation and test failure dispositions.
3. *** Candidate may be required to support shift hours outside of traditional 1st shift hours as assigned. *** Including 3rd shift**
4. Support test failure investigation and problem reporting activities and process.
5. Support requirement development and validation, including review requirements maturity, allocation to appropriate means of verification and compliance
 
Job Number: JK-3947
Job Location: Irvine, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Avionics Engineer

Description:
Description:
Enea Software & Services, Inc. is seeking a Senior Systems Engineer for avionics systems design, integration, test, and FAA certification. Qualified candidates will join an exciting environment and play an important role in the development of new products for General Aviation. BendixKing provides outstanding opportunities for high-caliber and creative individuals with a passion for General Aviation.
Responsibilities:
• Product design, including form factor, architecture, data communications, feature/functionality, user interface, MOPS compliance, etc.
• Analyze marketing requirements, regulations and system architectures to translate them into system requirements using model based techniques
• Develop system integration strategies, test and certification plans to assure that operational and functional requirements are met
• Assist in development and improvement of systems engineering processes for optimal execution
• Develop work breakdown structures and schedule estimates during project planning phase
• Research new technologies and techniques, and apply them to product development
• Is recognized as an emerging technical authority within Systems Engineering and acts as a mentor to others
Basic Qualifications:
• Bachelors degree in Engineering
• At least 6 years systems engineering experience with certified avionics products
Additional Qualifications:
• Strong technical design skills and knowledge of relevant technologies
• Broad knowledge of avionics systems and interfaces with direct application of avionics systems, software, and hardware development processes and standards, including ARP4754, DO-160, and DO-178C and product specific Technical Standard Order(s).
• Strong General Aviation (Part 23/27) knowledge and experience
• Passion for General Aviation and product design
• Strong team player and interpersonal communication skills
• Strong technical & requirements writing skills
• Ability to develop and drive consistent and efficient engineering processes.
• Exposure to model based development and SysML
• Able to pro-actively drive toward objectives with minimal oversight
• Experience with complex system integration testing and troubleshooting
• Possesses a broad understanding of electrical, software, mechanical, and certification principles
• Experienced with aviation certification (FAA, EASA, etc.)
• Pilots license preferred
 
Job Number: WW033017BK
Job Location: Gilbert, AZ
Rate: DOE
Per Diem: DOE
Overtime: YES
Duration: 1 YEAR
Start Date: April 15
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH-AVIONICS-Grade 07

Description:
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

PRIMARY RESPONSIBILITIES
1. Development of requirements
2. System Integration
3. Generation of lab and aircraft test procedures
4. Troubleshooting avionics issues on test, production and fielded aircraft
5. Support program management reviews

BENEFICIAL EXPERIENCE
- FAA and foreign certification (preferred)
- DO-178B, DO-160 and DO-254 processes (preferred)
- Technical project management (preferred)
- Supplier technical management (preferred)
- Pilot or A&P experience (preferred)

EDUCATIONAL REQUIREMENTS
- BS Engineering in a related field w/7+ years relevant professional experience
- Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 17-703-1551
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Position Purpose:
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities:
Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions: 1. Perform additional duties as assigned.

Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
 
Job Number: 17-718-102441
Job Location: Southeast
Rate: 34.00
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data
2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire
3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products
4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process
5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required
6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired
7. Accustom to a fast paced environment able to work overtime as required to meet deadlines
8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired
9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
-Responsible (either individually or with other team members) for the writing of major portions of technical publications.
-Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications.
-Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions:
1. Perform additional duties as assigned.
 
Job Number: 7406
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data
2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire
3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products
4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process
5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required
6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired
7. Accustom to a fast paced environment able to work overtime as required to meet deadlines
8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired
9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
-Responsible (either individually or with other team members) for the writing of major portions of technical publications.
-Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications.
-Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions:
1. Perform additional duties as assigned.
 
Job Number: 7407
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr.

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data
2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire
3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products
4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process
5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required
6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired
7. Accustom to a fast paced environment able to work overtime as required to meet deadlines
8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired
9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
-Responsible (either individually or with other team members) for the writing of major portions of technical publications.
-Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications.
-Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions:
1. Perform additional duties as assigned.
 
Job Number: 7405
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
A contributor on a Test Development team focused on developing hardware and software test sets for RF/microwave systems. This individual will be responsible for interpreting product specifications and developing necessary software test sequences and test fixturing. The individual will also be responsible for integration activities including accurately characterizing the product performance under test on multifaceted test equipment technologies.
This position requires the individual to be able to isolate and resolve design defects in both hardware and software.
The individual will be required to maintain ownership for all aspects of their test development projects.
The candidate must be willing to work off-shifts or extended weeks to meet schedule milestones.
Successful performance will require driving manufacturing test development for complex RF/ microwave systems, and integrating tests into a lean manufacturing environment.

Skills Required:
The candidate must be familiar with microwave theory with software competencies in Agilent VEE, NI-TestStand or NI-LabWindows.
Individual must be capable of conforming to a structured development approach with the ability to participate in design reviews within a multidiscipline team.
The candidate must demonstrate appropriate time management, task tracking, organizational skills, and ability to read, understand, and follow requirements

Skills Preferred:
• Experience in developing test software application using automated test methods
• Familiar with the control of hardware through software interfaces (automated test sequence)
• Familiarity with RF instrumentation (i.e. network analyzers, spectrum analyzers and signal sources)
• Software programming competencies (Agilent VEE, NI-TestStand, NI-LabWindows, C, C++, etc)
• RF test fixture design competencies
• Advanced computer skills including MS-Office applications
• Familiarity with functional test procedure development and maintenance
• Experience in conducting design reviews with project leads and stakeholders

Experience Required:
Prior DoD experience preferred

Education Required:
This position requires a Bachelor's Degree in Electrical Engineering or related technical field with 5 years of applicable work experience; or a Bacholer’s Degree and 3 years experience.

Education Preferred:
BS degree in Engineering
 
Job Number: 38146
Job Location: Nashua, NH
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Orlando, FL
Pay Rate: DOE ($55/hr - $60/hr)
Duration: 1 year contract
Shift: First
*Must be a U.S. Citizen*
*Must have an ACTIVE Secret Clearance*

Job Description:
-Engineer will be responsible for implementing cyber security controls on the F/A-18 IRST Test Equipment.
-There are 109 compensating controls that range from computer controls, to physical access to configuration data management.
-This engineer will need to work with IT specialists to implement the computer controls on the test stations and then run each test software package with the flight hardware to verify that implementation of these controls did not break the test software.
-Engineer needs to have a working knowledge of National Instruments TestStand software.
-Labwindows CVI and Labview experience is a plus.

Mandatory Skills:
-Bachelors degree from an accredited college in a related discipline.
-Minimum 10 years of engineering experience.
-Requires experience in designing Interface Test Adapters (ITAs), test station and ITA schematic design and layout.
-Design of Printed Wiring Boards (PWB).
-Knowledge of Electro-Mechanical and Electro-Optical principles to be applied to Test Station Solutions (6-8 years)
-Knowledge of electrical engineering principles to be applied to product design (4-5 years)

Desired Skills:
-Flight hardware (i.e. the product) design.
-High-speed communication.
-Troubleshooting flight hardware.
-Programming in National Instruments TestStand, LabWindows/CVI and Labview FPGA.
 
Job Number: 7062
Job Location: Orlando, FL
Rate: 55.00-60.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
VL-ME-COMPONENT INTEGRATION-Grade 02

Description:
The position is for the Electrical and Avionics Component Integration Department - The group is responsible for design and preparation of basic data and preliminary design documentation including general arrangements and layout producibility for harnesses and equipment. Product and Process Design, Work Instruction Planning, and Manufacturing Support are functions performed within the group. Areas of responsibility include electrical power system components, instrument panel, crew stations, antennas, lighting, air-speed systems, molded wiring assemblies and wire harness assemblies and installations.
The particular responsibilities of this position include Component and/or Process Design, Work Instruction Planning, and Manufacturing Support of Electro-Mechanical Aircraft Installations. Candidates will evaluate designs for producibility, develop tooling and manufacturing plans for components, assemblies and installations.

QUALIFICATIONS
Knowledge of engineering drawings, geometric tolerances and dimensioning, as well as, computer aided drafting skills are required. Data collection and reporting including engineering change tracking are additional responsibilities of the position. A 4 year engineering degree in a related field.
 
Job Number: 17-701-1597
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WG-Flight Test Flight Controls/HQ-Grade 04

Description:
PURPOSE
Plan, conduct, manage and report flight control systems and handling qualities flight tests. Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data. These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters. Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.

SKILLS
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution. Utilize Matlab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.

EXPERIENCE
Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.

Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience. Fly-By-Wire experience preferred. Key skills and knowledge required are: Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing. Computer skills: Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.

ADDITIONAL NOTES
The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.
 
Job Number: 17-706-1474
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engineer

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

This position requires an active (or the ability to obtain) U.S. Security Clearance, for which the U.S. Government requires U.S. Citizenship.
 
Job Number: 38208
Job Location: OK
Rate: 55/hr
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Design & Installation Engineer I (PA)

Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

....Additional Comments - >1 Year design experience on an aircraft platform (Preferred)

Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

CATIA V5
 
Job Number: EEpa
Job Location: Ridley Park, PA
Rate: up to $35/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer III (OK)

Description:
10 OPENINGS - HOT

US CITIZENSHIP, Secret Clearance, NOT REQUIRED to start.

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: EEOk
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search