Job Search Results

805 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/18 Sunday 03:58AM Pacific Time by ContractJobHunter. )

Listings 1 - 805

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2388 - ENGINEERING TECHNOLOGIST - STRUCTURES - cv, word doc

Description:
Provide technical support related to Client aircraft to external and internal customers for issues related to structures and surface finish (paint, primer, varnish on completion parts, etc).

Issuing and supporting engineering change requests for in-service issues and supporting Engineering through the change request process.

Monitoring the fleet for reliability, technical issues and identifying root cause and corrective actions.

College degree in Aircraft maintenance or a University degree in Mechanical Engineering.

Have five (5) years%u2019 experience in aviation.

Have good knowledge of aircraft systems and structure. Challenger experience is an asset.

Are computer literate, familiar with Lotus Notes & MS Office.

Are a team player, capable of working well with colleagues and customers, have a winning, can-do attitude, and results oriented.

Bilingual - have very good communication skills, both written and spoken, in French and English.

Knowledge of ground support equipment is an asset.

Knowledge of aircraft operation, engineering and maintenance is an asset.
 
Job Number: 2388
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2402 - CABINET INTEGRATOR - cv, word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Must be challenge-driven, results-oriented and problem-solving oriented;

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college

Familiar with the CATIA V5 3D design tool;

Good oral and written communication skills in English and French;

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority;

You are customer focused, problem-solving and innovative focus as well;

You are autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2402
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2403 - MECHANICAL DESIGNER - SURFACES - cv, word doc only

Description:
Integrate all foam and upholstery build-up and installation on the seat and divan frame

Produce datasets (detail, assembly and Installation), 3D and 2D

Produce and maintain engineering drawings that define the interfaces, details and installations

Supports the W/P integrators in the design.

Produce deliverables such as PCD (procurement control drawing), AMOs (advanced material order) etc

Develop/Design with the Program's design intent and vision.

Closely communicate with supporting functions, Methods, operations, Customer support, design lead, Industrial Design, Weight and M&P.

Design for manufacturing and assembly.

Provide engineering support to Manufacturing for the installation.

Integrate all foam and upholstery build-up and installation on the seat and divan frame.

Highlight and mitigate risks to be able to meet commitments

Respect and follow guidelines BES / BAPS / BM / PDJ / standards/practices, processes and lessons learned.

Ensure design rules are respected and participate to populate the design guide lines.

Ensure the work (dataset & deliverables) are met on time with quality

Ensure customer and production standards are met.

Lead design activities with methods, production, logistics before entry in production.

Maintain an updated detailed product structure of their product, ( IDL, 3D product structure, Options matrix, etc)

Manage priorities to meet assigned deadlines.

Have a college or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have relevant technical experience in interior completion.
Experience on Client Platform, Seating Design or Integration is an asset, as well as, configuration and spec%u2019ing experience.

Have solid experience working with Enovia/VPM Nav and Catia V5 (two (2) to five (5) years).

Have the understanding of product structure and relational modeling.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have strong verbal and written English communication skills including verbal French.

Also demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.
 
Job Number: 2403
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2405 - DESIGN STRUCTURE ENGINEER - cv, word doc only

Description:
Produce layout.

Make the concept of installation and details of cell structures and systems installations.

Provide estimates and statements of work for design related activities.

Participate in design review presentations and technical investigations.

Must have a Bachelor Degree degree in aeronautical or mechanical engineering with 5 years of related experience.

Knowledge of CATIA V5, 2D and 3D modeling.

Bilingual - have a good level of written and speaking French and English.

Have a good integration skills when dealing with multidiscipline groups and partners.

Experience in Aircraft Structures is required.

Experience in System Installation is required.

Knowledge of Client terminology is required.

Ability to create kit drawings and option drawings.

Ability to understand and resolve complexes technical issues.

Knowledge of design standards, configuration management and change management is an asset.

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5 and 2D drawing.
-Knowledge of Enovia is required.
-GD&T and technical drawings
-Manufacturing requirements
 
Job Number: 2405
Job Location: Montreal/Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2407 - STRESS ANALYST - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work
.
Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports.

Support various research and development projects.

Bachelor in aerospace or mechanical engineering.

Have a minimum of 5 years MRB experience.

Experience including at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Practical knowledge and experience of Nastran/Patran
Excellent knowledge of aircraft structure and system installation technical requirements.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Are customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2407
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 06/14/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2408 - PROJECT ENGINEER - cv, word doc only

Description:
Monitor engineering deliverables internally and with our customers / suppliers.

Coordinate the work of multidisciplinary teams.

Manage timelines and resources.

Participate in the financial evaluation of projects.

Follow up on tests including the production of specimens.

You will also be involved on a research and development project for which you will.

Structure the project in phases including: definition, fabrication, assembly and testing of a life-size specimen.

Manage timelines and multifunctional resources.

Coordinate the work of the work teams.

Organize progress reviews, IPDTs and minutes of meetings.

Track production deliverables.

Communicate progress status to technical teams and management.

Bachelor's degree or a Master's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Materials Engineering and at least 8 years of project management experience in the aeronautical field Automated Production Engineering or Materials Engineering.

Knowledge of manufacturing processes for composites used in the aerospace industry.

Ability to work in a team.

Have organizational skills and project management skills including financial aspects.

Bilingual - have fluency in English and French (written and spoken) and ease of communication.

Knowledge of Microsoft Office Suite.

Must have extensive experience in project management activities (planning, schedule follow up and budget management).

Knowledge on implementation of change management activities is an asset.
 
Job Number: 2408
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Last Updated: 06/14/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2409 - DESIGNER - INTERIORS - cv, word doc only

Description:
Produce Regional Aircraft interface and installation drawings of interior components (cabin shell items, lavatories, galleys, wardrobes, electrical connections, piping, storage modules and structural provisions) while interacting with other groups like stress, systems design, methods, production, interior suppliers and customer design engineering.

Integrate partners to the program

Perform review of designs with interpretation of industry regulatory requirements and design practices.

Prepare and review certification reports associated to new interior certification requirements.

Support suppliers and production personnel's

Technical or Engineering degree in Aeronautical or Mechanical Engineering

Ffive (5) to seven (7) years of related experience

Knowledge of CATIA V5, Enovia is required

Knowledge of CATIA V4 is an asset

Bilingualism (English and French) is an asset
 
Job Number: 2409
Job Location: Mirabel, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/30/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2414 - MECHANICAL DESIGNER - CABINETS - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Act as the technical focal point for the engineering external suppliers.

Manage and conduct quality, productivity and cost governance with the engineering external suppliers.

You must be challenge-driven, results-oriented and problem-solving oriented;

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Familiar with the CATIA V5 3D design tool and Enovia V5.

Well organized and focused on projects.

Good oral and written communication skills in English and French.

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.

Experience in the design or installation of cabinets to be assembled.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred) or Commercial aircraft is required.
 
Job Number: 2414
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/29/2018
Last Updated: 06/27/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2424 - MATERIAL & PROCESSES ENGINEER - cv, word doc only

Description:
Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support special projects, the production floor and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Write test plans, test reports and other support documentation.

Work closely with the flammability cell and propose solutions to flammability issues.

Support certification and qualification documentation review from our suppliers.

Support a flexible work schedule.

Bachelor degree in Mechanical, Aerospace, Materials or Chemical engineering (or equivalent), with a minimum of 5 years of experience in Materials & Process engineering.

Have a strong background in materials, manufacturing processes and chemical processes.

Are familiar with aircraft interior materials and processes, including but not limited to composite panels, assembly techniques and cabinet finishing.

Are familiar with flammability certification requirements as per FAR 25.

Are familiar with engineering drawings and drafting principles.

Are proficient in Microsoft Office (Word, Excel, etc.)

Have general knowledge of Catia V5 and Enovia (asset)

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Bilingual - have strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2424
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 09/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2424 - MATERIAL AND PROCESSES ENGINEER - cv, word doc only

Description:
Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support special projects, the production floor and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Write test plans, test reports and other support documentation.

Work closely with the flammability cell and propose solutions to flammability issues.

Support certification and qualification documentation review from our suppliers.

Support a flexible work schedule.

Bachelor degree in Mechanical, Aerospace, Materials or Chemical engineering (or equivalent), with a minimum of 5 years of experience in Materials & Process engineering.

Have a strong background in materials, manufacturing processes and chemical processes.

Are familiar with aircraft interior materials and processes, including but not limited to composite panels, assembly techniques and cabinet finishing.

Are familiar with flammability certification requirements as per FAR 25.

Are familiar with engineering drawings and drafting principles.

Are proficient in Microsoft Office (Word, Excel, etc.)

Have general knowledge of Catia V5 and Enovia (asset)

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Bilingual - have strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2424
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2442 - MECHANICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mechanical engineers currently to support a number of programs across the Space Mission organization

Candidates will possess a Bachelor degree from a recognized university, in Mechanical Engineering or equivalent, and a minimum of 4 years of post graduate professional experience.

(Previous Aerospace experience and familiarity with MIL/ASME standards and ISO are a definite asset.)

Ability to interface with customers on a daily basis will be a key asset for this position.

Experience with CAD, preferably 3D is also an asset.

Must have solid oral presentation skills, as well as written communication skills.
 
Job Number: 2442
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2443 - STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor in aerospace or mechanical engineering.

Minimum of 5 years MRB experience.

Experience, including at least one of the following skills, structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Excellent knowledge of aircraft structure and system installation technical requirements.

Knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.
Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Bilingual - have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2443
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2445 - PRODUCT STRUCTURE MANAGEMENT - cv, word doc only

Description:
Responsible for the Product Structure Management within the Global 7000-8000 Program for Interiors and Completions Engineering.

Create and maintain the top levels of a configured product structure from the design phase through certification and transitioning to a sustaining program.Participate in the organization of the completions product structure to optimize Engineering packages with all available customer options.

Participate in the maintenance of the Options Catalog.

Configure the engineering packages in the PLM system and create AC specific product structures.

Work with the Customer Interfacing Team to create project specific Options listings.

Create the Customer Configuration Lists defining all engineering packages required to meet selected options and create Top-Level AC specific engineering lists.

Maintain and define rules controlling the applicability of the Engineering packages in relation to Customer options. Program these rules in the VSpec Customer Definition Software.

Responsibility for control, health and quality of the Aircraft Interiors configured product structures.

Keep an oversight over the product changes and maintain the product structure.

Support the Completions Engineering groups at different
development and customer aircraft definition milestones as needed.

A degree in Aerospace or Mechanical Engineering or equivalent education.

Minimum of 5-7 years%u2019 experience in design, product configuration management.

Possess strong knowledge and technical expertise of product structure configuration within a PDM/PLM tool is essential.

Knowledge of aerospace industry best practices.

Are proficient with ENOVIA VPLM V5 product suite, especially with the product configuration workbenches.

Have knowledge of Business Aircraft Completions.

Experience on CATIA V5, experience with Knowledge Based Engineering (KBE) is an asset

Have experience with SAP & eProduct.

Have experience in pulling together the efforts of varied groups with different objectives and mindsets towards a common objective.

Are resourceful in identifying and removing roadblocks and looking for creative ways to overcome challenges, and can maintain a strong adherence to the Program long-term vision.

Motivated by challenges and a drive for results, bringing a proven track record of success

Good communication and technical report writing skills - able to clearly and concisely convey information and vulgarize technical subjects.

Bilingual (French and English), oral and written is an asset.

Would be available to work on a Tuesday to Saturday schedule if required.

Have a sense of teamwork, the ability to work with minimal supervision, the ability to work in a dynamic environment, you are mobile (Montreal) and you are able to make decisions autonomously.
 
Job Number: 2445
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
54262 | ECS Engineer

Description:
Environmental Control Systems Engineer

Fort Worth, TX

12 month contract


'Looking for a candidate who can lead the design of the actual system”



Environmental Control Systems (ECS) Engineer opportunities in Fort Worth, TX.

Position Responsibilities:



The ECS Engineer is responsible for:

Developing ECS requirements and architecture, including aircraft heating, cooling, defog, air filtration, and oxygen requirements

Conducting design and analysis of the ECS and integrating the ECS into the aircraft in coordination with interfacing systems

Managing supplier development and qualification efforts

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification





Qualifications





Education Requirements:


•Bachelor of Science Degree in Mechanical Engineering (or closely related technical field) is required.
•Master of Science Degree is preferred.



Position Requirements:


•Experience at all levels will be considered with a minimum of 2 years specific experience with ECS integration, development, and testing. At least 5 years experience is preferred.
•Familiarity with model based systems engineering
•Familiarity with RTCA DO-160, MIL-STD-810, and military and industry standards for ECS design
•Experience with creation of system specifications, requirements traceability, and verification. Preferred experience with Enovia and DOORS.
•Generation of Qualification and Test plans.
•Experience with ECS development and testing
•Experience with aircraft installation, functional testing, and troubleshooting
•Candidates must be eligible to obtain Secret Security Clearance

Please email resume to tmcilrath@butler.com.
 
Job Number: 54262
Job Location: Fort Worth, TX
Per Diem: pd split possible
Duration: 12 months
Start Date: July
Input Date: 06/08/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer ( Chandler , AZ ) 8113878

Description:
Aerospace Engineer ( Chandler , AZ ) 8113878
12 Month Contract

Pay Rate: $45-50/hr , maybe more for the right candidate

**SECRET CLEARANCE STRONGLY PREFERRED, BUT WILL ACCEPT CANDIDATES WITH THE ABILITY TO GET CLEARANCE**

Job Snapshot:
Position will support design, integration, analysis and test of launch vehicle ordnance, pneumatic, and motor subsystems. Mechanical or Aerospace engineering experience is preferred.
Perform ordnance, motor, and pneumatic systems analysis, design, development, and test activities. Develop component or subsystem specifications, test procedures, and analysis tools. Run development, qualification, and lot acceptance tests. Document and present analysis and test results as required.

Top three skills:
• Writing and executing test procedures and work instructions
• Analysis and requirements verification
• Ability to generate engineering documents including specifications, test reports, drawings, and presentations
 
Job Number: 8113878
Job Location: Chandler, AZ
Rate: 50
Per Diem: split
Overtime: poss
Duration: 12 Months
Start Date: ASAP
Input Date: 06/05/2018
Last Updated: 06/22/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Propulsion Engineer ( Dulles, VA ) 8213359

Description:
Aerospace Propulsion Engineer ( Dulles, VA ) 8213359
12 Month Contract

Pay rate: Open

This opening is for a Senior Propulsion Engineer who has experience working on, designing, evaluating and analyzing liquid propulsion systems. Candidates who do not have liquid propulsion experience will not be considered. The Senior Propulsion Engineer will perform a wide range of duties associated with the specification, procurement, test, and delivery of related hardware for use on launch vehicle platforms. Candidate will be support for all aspects of product management, including resolving technical issues, scheduling of production and test activities, and working through potential conflicts with suppliers. In addition, candidate will maintain detailed records for each component type, which includes specifications, purchase orders, pedigrees, test results, key technical characteristics, and non-conformances.


The Candidate will help research, design, test, and document various hardware systems. The Candidate will gather information for desired design and processing changes from various vendors and present them to management for approval. The Candidate will be required to perform and publish analyses and waivers, by applying sound engineering principles and techniques. The Candidate will plan engineering activities, such as component tests and technical analyses to ensure the product meets specified requirements.

Education & Experience Requirements:
• Candidate shall possess a Bachelors of Science Degree in Engineering, preferably in Aerospace Engineering or Mechanical Engineering.
• Minimum of five years related experience with propulsion engineering subsystems is required or equivalent combination of education and experience.
• Candidate is preferred to have experience with liquid propulsion systems.
 
Job Number: 8213359
Job Location: Dulles, VA
Rate: Open
Per Diem: Split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 09/07/2018
Last Updated: 09/17/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.


The Structures Company is an AA/EOE.
 
Job Number: 217
Job Location: Greensboro, NC
Rate: $50-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 10/05/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Seat/Slide Technician

Description:
PDS Tech is seeking Aircraft Seat/Slide  Techs for open positions Atlanta, GA


  • Perform final assembly of interior systems and mechanical assemblies. 
  • Disassembles aircraft interior components.
  • Responsible for proper storage and separation of serviceable parts, i.e. bin or bag.
  • Responsible for proper storage and separation of unserviceable parts, i.e. reject or scrap.
  • Wash serviceable parts.
  • Seat Cleaning.
  • Correct usage of pressure washer.
  • Removal of aircraft seat cushions.
  • Removal of aircraft seat dress.
  • Completes daily paper work for job assignments, indicating material used and amount of time involved.

Basic Qualifications:
  • High School Diploma or GED
  • Mechanical experience required
  • A&P license a plus
  • Knowledge of basic hand tools, i.e.
  • Knowledge of applicable power tools.
  • Completion of seven (7) required safety courses: Respiratory Training, Injury Prevention Program, Emergency Action Plan, Blood borne Pathogens, Hazardous Communication, Lock Out Tag Out, Ergonomics.

 
Job Number: 1810084811
Job Location: Atlanta, GA
Duration: 3 months
Input Date: 04/25/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNhPAAU&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assistant Project Engineer

Description:
Assistant Project Engineer
Savannah, GA
Rate: $50.65-$56.28

Unique Skills:

DO-160 Experience preferred Smarteam Experience preferred Experience developing electro-mechanical systems required Bachelors in technical field preferred


Education and Experience Requirements:

Bachelor's Degree Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years Engineering experience. One (1) year Project management experience. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.


Position Purpose:
Under the guidance of senior project engineering personnel, leads engineering teams in the execution of projects or segments of engineering programs. Establishes requirements, operational objectives and work plans for the successful completion of those efforts.

Principle Duties and Responsibilities:

Essential Functions: 1. Responsible for planning, organizing and conducting segments of engineering projects with diversified technical requirements. 2. Defines project work scope, develops statements of work, task descriptions, product plans, budget estimates and manpower requirements. 3. Assigns tasks to functional personnel and suppliers for specific projects and provides the necessary project direction to meet schedules and fulfill requirements. 4. Provides project management between engineering sections and all related functions including program management, other departments, suppliers, consultants, and customers. 5. Anticipates problems with assigned projects (technical, budget, schedule) and recommends appropriate action to prevent their occurrence. 6. Effectively reports to management on key project accomplishments, status, issues and budget. 7. Approves project related engineering data to assure compliance with corporate policies and FAA/military requirements as required.

Additional Functions: 1. Works under direct leadership and guidance of a senior-level project engineer. 2. Actively works to improve daily processes and ensures all work meets customer requirements. 3. Maintains a current knowledge of technical developments. Perform other duties as assigned.

Other Requirements: 1. The level of skills and abilities appropriate for this grade are detailed in the departments skills/knowledge matrix. 2. Excellent verbal and written communication skills, including strong interpersonal skills, teambuilding skills, and the ability to persuade others without creating adversarial relationships. 3. Works closely with project team members to resolve problems with assigned projects (technical, budget, schedule). 4. Interacts with senior management and key officials of other organizations as required. 5. Responsible for building and leading engineering project teams.
 
Job Number: 9231
Job Location: Savannah, GA
Rate: $50-$56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assistant Project Engineer

Description:
Under the guidance of senior project engineering personnel, leads engineering teams in the execution of projects or segments of engineering programs. Establishes requirements, operational objectives and work plans for the successful completion of those efforts.

Unique Skills:
• DO-160 Experience preferred Smarteam Experience preferred Experience developing electro-mechanical systems required Bachelors in technical field preferred

Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Duties and Responsibilities:
• Responsible for planning, organizing and conducting segments of engineering projects with diversified technical requirements.
• Defines project work scope, develops statements of work, task descriptions, product plans, budget estimates and manpower requirements.
• Assigns tasks to functional personnel and suppliers for specific projects and provides the necessary project direction to meet schedules and fulfill requirements.
• Provides project management between engineering sections and all related functions including program management, other departments, suppliers, consultants, and customers.
• Anticipates problems with assigned projects (technical, budget, schedule) and recommends appropriate action to prevent their occurrence.
• Effectively reports to management on key project accomplishments, status, issues and budget.
• Approves project related engineering data to assure compliance with corporate policies and FAA/military requirements as required.
 
Job Number: 24-264
Job Location: Savannah, GA
Rate: $50-56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Quality Control Inspectors - Bridgewater, VA

Description:
STS AeroStaff Services now offers Aviation Quality Control Inspector jobs in Bridgewater, Virginia.

Job Summary:

The Quality Control Inspector role exists to develop, maintain and enforce a framework of standards and inspection for aircraft maintenance safety and reliability at the company.

Job Duties:

• Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures

• Inspect repaired or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards using checklists, hand tools, and test instruments

• Ensure all paperwork is completed correctly on in-process aircraft

• Research and draft technical documents

• Inspect parts for condition, conformity and documentation at shipping, receiving and acquisition

• Assist QC Manager with aircraft inspections for condition, quality and conformity with FAA, Aviation industry and company standards

• Other duties as assigned


Qualifications:

• High School diploma or equivalent required; college degree through a technical/vocational school is preferred

• Previous experience performing routine maintenance on mechanical equipment; experience with aviation equipment including King Air, Dash 8 or Citation Jet preferred

• Must hold a valid Airframe & Powerplant license

• Ability to perform maintenance and inspection duties utilizing basic hand tools

• Strong written and verbal communication skills

• Working knowledge of Microsoft Office products and the ability to use and effectively navigate ERP program, time clock and company intranet

• Ability to follow directions and remain on task

• A thorough understanding of aircraft and aircraft parts

• A thorough understanding of aircraft maintenance procedures, aviation standards and FAA regulations

• Strong interpersonal and organizational skills

• Ability to work in close proximity to other people with a cooperative attitude

• Manage time to effectively meet company priorities


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42406
Job Location: Bridgewater, VA
Duration: Contract
Input Date: 06/04/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air System (BAS) and Vapor Cycle System (VCS) Design Engineer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

The Structures Company is an AA/EOE.
 
Job Number: 213
Job Location: Greensboro, NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 08/01/2018
Last Updated: 09/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst

Description:
Description:
At Client Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a client employee. Client values your skills, training and education. Come and experience your future! Candidate will also be responsible for general purchasing of low to medium complexity Mechanical and Electrical commodities and sub-assemblies in support multiple Client’s programs. Candidate will engage with cross-functional teams to ensure supplier deliveries meet program performance, schedule and cost requirements. Adheres to policies, procedures, programs, systems and assure timely and economical procurement of all material, parts, assemblies, equipment and service.

Skill/Experience/Education:
Mandatory:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 3 years of professional experience; or 1 year of professional experience with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 08064
Job Location: Moorestown, NJ
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

CNC Machinist/Operator (4) - CA

Description:
Chipton-Ross is seeking a CNC Machinist/Operator for an opening in City of Industry (3) and Walnut, CA (1).

Controls operation of single or multiple production machines in accordance with established procedures and guidelines for the process of manufacturing products

RESPONSIBILITIES:
Setups and operates a variety of machine tools such as, milling machines, to make metal parts, mechanisms, tools or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequences of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
Must be able to read blue prints, NC programs, understand M and G codes. Must be able to drive forklift. Must be able to lift up to 50lbs. Must know NC table setups.

HARD REQUIREMENTS:
Familiar with CNC Gantry machinery. Experience with various materials including aluminum and titanium. Candidates must have Gantry experience, 5 axis, 3 router vertical milling machines, long table setups and/or single router high speed machines such as Haandtmans. (Client manufactures long aluminum extrusions that are 50 to 100 feet long.)


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:

Full-Time

 
Job Number: 168733
Job Location: Walnut, CA
Rate: $18 to $30.00 DOE
Duration: 6 Months, 1 Year
Input Date: 02/15/2018
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
We are recruiting for a motivated CNC Programmer for this Aerospace Company to set-up, and operate manual and CNC machines to produce tight tolerance components and tooling while reducing run times.

The ideal candidates must be motivated in the programming and setup of CNC machines in a high-mix, low-volume environment requiring quick turnaround manufacturing runs and on-the-job problem solving to ensure machine spindles are operating most of the shift.

Successful candidates will bring a broad array of skills to help grow the company and the position itself.

RESPONSIBILITIES
Model Parts in Solidworks
Program Parts in Mastercam
Defines Manufacturing Plans
Designs Tooling
Generates Set-Up Sheets
1st Run Set-Up and Part Part Validation
Assistance with First Article Inspections
Reports to the General Manager (Dotted-line to Sr. Programmer or Manufacturing Manager)
Completes Projects Accurately by Deadline
Understands the Material properties of hard and soft alloys

REQUIREMENTS
Min. 3 Years Experience with CAD (Solidworks) and CAM (Mastercam)
High Print to Part Aptitude (in understanding the complete manufacturing process, from Programming to Final Part Inspection)
Min. 3 Years Experience Operating Multi-Axis CNC and Manual Mills (Horizontal Preferred)
Productive, Turns New Programs Quickly
Fast and Efficient in Demanding Customer Environment
Ability to lift over 25 lbs
Excellent mechanical skills and aptitude
Positive, Collaborative, Industrious
Expert in Speed/Feed/Material Properties
 
Job Location: Kent, WA
Input Date: 04/27/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
COMPONENT CALIBRATION LAB TECHNICIAN

Description:
Component Calibration Lab Technician

Mechanical Component Calibration lab technician capable of working from Engineering drawings with limited guidance to fabricate and install mechanical load and data acquisition systems required to support ongoing Engineering Ground and Flight Test Development programs.

Duties and responsibilities include the calibration of aircraft and ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
 
Job Number: 365891
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer Aircraft Cabins

Description:
Completions Design Engineer Aircraft Cabins
Savannah, GA
Rate: $55.00

Unique Skills:

Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.


Education and Experience Requirements:

Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.


Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company aircraft.

Principle Duties and Responsibilities:

Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 9190
Job Location: Savannah, GA
Rate: $55
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer II

Description:
• Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.

Experience/Education Required:
• Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
• 18 months of related Engineering experience.
• Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
• Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principle Duties and Responsibilities:
• Solves typical engineering problems within assigned discipline
• Provides technical assistance to engineering staff and contributes to completion of project milestones
• Responsible for a complex engineering assignment, or a full project of lesser complexity
• Follows established schedules while developing plans for engineering assignments
• Obtains appropriate level of supervisor approvals for work accuracy and adequacy
• Proficiently applies company/organization policies and procedures
• Actively works to improve daily processes, and ensures all work meets customer requirements
• Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
• The level of technical skills and abilities appropriate for this grade will be established by each discipline.
• Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
• Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
• Ability to convey technical concepts in both written and verbal formats.
• Contacts are primarily within the organization, with occasional customer contacts on routine issues.
• Works under general supervision for routine tasks of minor complexity.
• With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 24-265
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/01/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Engineering Definition Control

Description:
• The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
• Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
• Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
• Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-263
Job Location: Savannah, GA
Rate: $77
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters

Description:
Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule, OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
- The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The candidate will also be a key resource in the design, development and testing of new electric propulsion products.
- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.


Skills:
Required:
- 2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
- Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).

Desired:
- Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
- Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
- Candidates should have strong technical writing and presentation skills, and should have experience working in teams.

Education:
- A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
- A Master's degree or higher in an engineering discipline or physics is preferred.
 
Job Number: 8872
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters WA

Description:
8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Duties:



** Candidates must have Electric Propulsion or Plasma Physics education or experience **

Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PLASMAENGINEERING PHYSICSPROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 07/24/2018
Last Updated: 08/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
Position Summary:
The Composite Design Engineer will be responsible for much of the structural design and documentation required as part of the development of an entire line of FAA TSO certified composite floats. This position provides a unique opportunity to be an integral member of a team dedicated to the creation of a new manufacturing initiative.
Position Responsibilities:
1. Conceptual design and related design studies of composite structure, including: outer mold line lofting, structural layout, part break definition, bonded joint configuration, assembly methodology, design for manufacturability, and tooling approach
2. Detail structural design using CATIA CPD, including ply layout, splicing, and darting information
3. Creation of design documentation, including drawings and prototype manufacturing planning
4. Creation of technical documentation related to design. This may include reports, presentations, and analyses which document lessons learned, design decisions made, results of tests conducted, etc.
5. Assist the tooling group with design of tooling, fixtures, and jigs for composite structure
6. Work with the manufacturing team to produce prototype and production composite parts and assemblies in accordance with approved specifications
7. Other engineering tasks central to the creation of a composite float such as: loads calculations, ply shape modification and nesting, providing design support to other departments, etc.
Experience and Skills
Qualifications:
· Bachelor of Science Degree in Engineering (Aerospace, Mechanical, etc.) with experience in all stages and facets of composite structural design. New product development experience preferred
· Proficiency with CATIA V5. Autodesk Inventor experience a plus
· Experience with composite part and assembly definition. Experience with CATIA CPD strongly preferred
· Experience with composite drafting and documentation practices, including familiarity with GD&T
· Experience with design data control and product lifecycle management practices. Familiarity with Autodesk Vault a plus
· A strong understanding of the theory and practical application of composite structures in the aerospace industry
· Strong intuitive understanding of practical composite fabrication methods and material behavior
· Understanding of metallic part design and integration into composite structure
· Excellent interpersonal, presentation, and written communication skills
· Hands-on experience with composite part and bonded assembly fabrication

The Structures Company is an AA/EOE.
 
Job Number: 205
Job Location: ST Paul, MN
Duration: Permanent/Contract
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Support manufacturing of composite aerospace components.


Work closely with operations personnel to develop manufacturing solutions and solve production issues in hand layup, secondary bonding, autoclave cure, machining, NDI, assembly, and final inspection processes.


Learn and understand requirements to determine product impacts and recommend disposition of the parts.


Work in a cross functional team to develop and implement process improvements.


 


Requirements & Qualifications:


Bachelor’s Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 10 years of applicable experience


Experience in working with aerospace specifications and drawings


Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment


Knowledge of root cause / corrective action processes and techniques


Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)


Functional knowledge of production control systems (SAP/Visual Mfg/etc)


Experience authoring, modifying and auditing procedures


Experience estimating, planning, and streamlining manufacturing processes


Experience using SPC to monitor and improve processes


Experience addressing manufacturing discrepancies through a formal MRB process


 


Preferred Skills and Experience:


Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience


Experience in the use of NX 10


 
Job Number: O8092956
Job Location: Clearfield, UT
Rate: 75-85
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - E E Background (OK)

Description:
Basic Purpose/Accountabilities:
Accountable for project management activities, including front end loading, detailed design, and construction support for electrical projects at the Client Refinery Technical Services.

Accountable for small and mid-sized projects up to $30MM.

Primary Functions/Responsibilities:
Safety
• Manage electrical projects resulting in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.
• Complete all required safety training and adhere to applicable safe work practices and procedures.
Integrity
• Accountable and deliver on commitments
Responsibility
• Provide single point of accountability for project management and project expertise.
• Manage project costs, project schedule, personal resources, technical competency, environmental requirements and safety.
• Interact with Process, Instrument/Electrical Engineers, and Mechanical Engineers to coordinate project activities and coordination of assigned resources for completion of projects to meet project timeframes.
• Taking a lead role in electrical capital projects
Innovation
• Participate in and support the use of the Front End Loading and other demonstrated best practices in the execution of projects.
Teamwork
• Partner with customers to develop project charters, secure funding, engineer projects, support construction and provide assistance through the startup of projects.

Critical Skills:
• BS degree in Electrical Engineering
• Able to interact with Contractors

Leadership Criteria:
• Strong leadership skills
• Communicate clear and specific strategies
• Use technical/project expertise to contribute to success
• Establish priorities and develops critical tasks
• Engender trust
• Create free flow of information
• Encourage creativity, innovation and continuous improvement
• Drive company values and values of all people
• Strong business focus to ensure value adding activities are captured and implemented
• Excellent customer focus
• Ability to utilize functional knowledge and expertise to contribute to the success of the business

Experience with:
• Electrical design, technical expertise and engineering support related to refinery electrical equipment and power distribution systems.
• Project management including developing capital estimates, preparing funding, detail design, scheduling, construction and execution plans.

Other:
• Minimum of 5 years refinery project experience

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-50118OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: PD Split Possible
Overtime: Possible
Duration: 11 mos or longer
Start Date: ASAP
Input Date: 06/25/2018
Last Updated: 06/29/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Controls Engineer- Equipment and tooling
Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.
(Not mandatory but good too in any of the below):
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/05/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
**Must be a U.S. Person for purposes of export compliance. A U.S. Person is defined as either a Green Card Holder or U.S. Citizen.**

**NEED CANDIDATES TO START IMMEDIATELY WITHIN THE NEXT 2 WEEKS!**

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 30657-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 05/31/2018
Last Updated: 06/12/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.

Duties and Responsibilities:
• Check Drawing, Engineering Order and Parts List for adherence to company standards.
• Check 3D dataset in CATIA V5 and PLM System.
• Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
• Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews; Document and communicate issues found during reviews; Consult with design team and other checkers for interpretation or drafting rules; Act as a Subject Matter Expert regarding interpretation and application of drafting rules; Provide inputs to management on major issues being identified and help develop alternatives for solutions.

Education, Work Experience, Certification and/or Licensure:
• Minimum of 10 years to a maximum of 25 years’ experience designing mechanical and / or structural parts, assemblies or installations for aircraft
• At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• 5 years of experience checking Aerospace Drawings.
• Detail oriented;
• BS Mechanical or Aerospace Engineering or equivalent;
• Experience with composite materials is a plus.

Knowledge, Skills and Abilities:
• Very familiar with aircraft production and assembly methods.
• Ability to address issues identified in a direct but respectful way.
• Ability to consistently apply defined criteria.
• Able to work with people with diverse corporate / design culture background;
 
Job Number: 28-021
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:


Description:

Job Title: Scale Model Designer


BS Degree in ME/EE/AE. Design Engineer with over 2 years of engineering experience in actual creation of required components per specialty (concept, specification setting and layout creation and negotiation capability) and CATIA V5 experience.

Activities include working from scan / surface and drawing data available for each vehicle development project and designing a scale model that is used for aerodynamic research and development in a scale wind tunnel environment. Along with designing vehicle models, candidate will also be responsible to work with aerodynamic development engineers to develop special test parts, fixtures for sensors, and help design countermeasure parts used in aerodynamic tests. Ideal candidate will have extensive design skills and be proficient in CATIA software package. Knowledge of Magics software would be a bonus, but not required. Machine design and automotive proficiency are a plus, as well as some hands on mechanical abilities. A good understanding of rapid prototype manufacturing techniques is also a bonus.
.
Over time and may be required depending on project load / Schedule.
 
Job Number: NSR10029DE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 06/07/2018
Last Updated: 06/22/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/12/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Design/Data Integrity Engineer

Description:
Design/Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, drafting, and checking of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. At times this position may also be asked to review design work created using either AutoCAD or CATIA V5 and ensure design standards are consistent with company standards and accepted design methods. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head. Experience as Design Checker/Data Integrity a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs. specific technical discipline or fifteen (15) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/11/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Mechanical Engineer-Cabin Interiors

Description:
Design/Mechanical Engineer-Cabin Interiors
Savannah, GA
Rate: $55.00/HR

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 8982
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Marine - Designers - All Disciplines

Description:
Piping, Mechanical, Electrical, Structural, Outfitting, and HVAC Designers for Navy Contracts. AutoCAD required, Ship Constructor is a plus.
 
Job Number: 4
Job Location: Southeast
Rate: $15-46/hr
Per Diem: No
Overtime: Yes
Start Date: tba
Input Date: 06/22/2018
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer 2

Description:
Electrical Designers needed for Navy Contracts on the MS Gulf Coast. AutoCAD required, Ship Constructor is a plus.
 
Job Number: 3
Job Location: Pascagoula, MS
Rate: $25-32/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 06/14/2018
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer 3

Description:
Electrical Designers needed for Navy Contracts on the MS Gulf Coast. AutoCAD required, Ship Constructor is a plus.
 
Job Number: 2
Job Location: Pascagoula, MS
Rate: $33-39/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 06/14/2018
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping Designer - Marine

Description:
Piping Designers 1-4 needed for Navy Contracts on the MS Gulf Coast. AutoCAD required, Ship Constructor is a plus.
 
Job Number: 1
Job Location: Southeast
Rate: $15-46/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 06/22/2018
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

Doors Design Engineer

Description:
Responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter - Level 2

Description:
Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description
- Create drawings from Creo Models for industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Involved with start-up activities associated with new product introduction including ordering, tracking, final prove in of tooling, and process development and implementation.
- Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
- Provide technical guidance and support to manufacturing assembly team.
- Apply lean manufacturing techniques to reduce cost and increase yields.
- Investigate root cause of failures/defects and implement corrective action to support continuous improvement.

Skill/Experience/Education
Mandatory:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds.

Desired:
- Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
- SAP experience
- Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
 
Job Number: 9375
Job Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Draftsman

Description:
Description
The Engineering Drafter will provide engineering support by performing a variety of product definition duties using CAD tools (AutoCAD & Solidworks) including layout sketches, notes, diagrams, CAD modeling and associative engineering CAD drawings, engineering documentation and reports in accordance with company policies and standards.

Requirements
REQUIREMENTS



· Strong working knowledge of Solid Works and/or AutoCad


· Basic geometric dimensioning and tolerancing (GD&T) and ability to perform tolerance stacks


· Engineering drawings/modeling and related specifications


· Mechanical drafting and design methods, techniques and procedures


· Mathematics, including algebra and trigonometry


· Perform mathematical calculations in area of assignment which may include positional tolerance (ANSI Y14.5), stress, gauging and other types of engineering analysis


· Interpret and follow verbal and written instructions


· Communicate effectively, both verbally and in writing


· Read and interpret drawings, schematics and related specifications


· Effectively interface with all levels of personnel and work in a team environment


· Effectively estimate, schedule and prioritize work flow


· Understand specifications and shop drawings
 
Job Number: DRAFT
Job Location: Carlstadt, NJ
Rate: OPEN DOE
Duration: LONG TERM CONTRACT
Start Date: ASAP
Input Date: 06/05/2018
Last Updated: 06/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router

Description:
EWIS 3-D Wire Router - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
- 3D wire routing
- EWIS
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- Cabin interior monuments
- Seats

Education and Experience Requirements:
High School Diploma/GED required
 
Job Number: 9081
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 11/16/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Active DoD secret clearance to start.
Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems. Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc. Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter. Create block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices. Facilitation of design reviews with key stakeholders to ensure designs meet requirements. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions.
Qualifications:
Basic Qualifications:
14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education will be considered in lieu of degree. Minimum of 9 years’ experience directly related to aircraft design and integration, as well as proven engineering team leadership abilities or equivalent education/years of experience. Demonstrated experience with 3D modeling software (NX or equivalent). Preferred Qualifications:
Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university. Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing the NX software.
 
Job Number: 682018
Job Location: Melbourne, FL
Rate: 100p/hour
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: June 2018
Input Date: 06/06/2018
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Lead efforts in designing, building, and testing of electrical systems for military, commercial and industrial electronic applications. The candidate will provide electrical engineering expertise and participate in multi-discipline integrated product team working closely with Program Managers and Systems, Software, Mechanical, Electrical and Manufacturing Engineers.


Working knowledge of OrCAD, PADS, Altium, AutoCAD and Solidwork
Experience with leading the Hardware Development Process, including CM, MRB, SDR and analysis
Hands-on experience with the full product life-cycle from engineering proposal to manufacturing release
Experience with military and commercial standards (MIL-STD-461, MIL-S-901D, IPC-610, FCC/CE)
Familiar with MATLAB, C/C++ and other programming languages.
Familiar with mixed signal schematic and PCB layout techniques
 
Job Number: 42270
Job Location: Waltham, MA
Per Diem: pos
Overtime: pos
Duration: 6 mont +
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Candidate will perform electrical design, development, integration and troubleshooting of power, simulated and actual aircraft electrical signals, simulated cockpit electrical panels in Mission Procedures Trainers and lab-based test stands. Candidate will prepare electrical design drawings, assemble, integrate, and test avionics test stand components.

REQUIRED EXPERIENCE:
Knowledge of electrical power, discrete, synchro, analog, and Mil-Std-1553 data interfaces. Experience in electrical design, development, and test of lab-based avionics test stands. Experience with VME-based processor and data interface components.
Circuit board soldering certification. Experience with PC-based hardware and software.
Create and update schematics and mechanical drawing using AutoCAD 4-5 Years
Electronic/Electrical Designs Perform complete simulator electronic/electrical designs. 0-3 Years
Mil-Std-1553 Knowledge of 1553 bus interfaces and implementation. 0-3 Years

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Part-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171274
Job Location: Palmdale, CA
Rate: $47 to $70.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: Yes
Start Date: Yes
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/16/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Drafter(Solidworks/AutoCAD/GD&T) position in Carlstadt, NJ

Description:
Recruiter to contact: Adam Salazar
Job Title: Engineering Drafter
Location: Carlstadt, NJ
Compensation: DOE
Assignment Length: Contract (Open Ended)

JOB DESCRIPTION:

Position Summary:

The Engineering Drafter will provide engineering support by performing a variety of product definition duties using CAD tools (AutoCAD & Solidworks) including layout sketches, notes, diagrams, CAD modeling and associative engineering CAD drawings, engineering documentation and reports in accordance with company policies and standards.
REQUIREMENTS
• Strong working knowledge of Solid Works and/or AutoCad
• Basic geometric dimensioning and tolerancing (GD&T) and ability to perform tolerance stacks
• Engineering drawings/modeling and related specifications
• Mechanical drafting and design methods, techniques and procedures
• Mathematics, including algebra and trigonometry
• Perform mathematical calculations in area of assignment which may include positional tolerance (ANSI Y14.5), stress, gauging and other types of engineering analysis
• Interpret and follow verbal and written instructions
• Communicate effectively, both verbally and in writing
• Read and interpret drawings, schematics and related specifications
• Effectively interface with all levels of personnel and work in a team environment
• Effectively estimate, schedule and prioritize work flow
• Understand specifications and shop drawings
 
Job Number: TBD
Job Location: Carlstadt, NJ
Rate: DOE
Per Diem: N/A
Overtime: N/A
Duration: Open ended Contract
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 06/14/2018
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Helena, MT
Duration: 5 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications:
5+ years of experience using CATIA V5
2+ years of client Tool Design experience
GD&T Standards Training
1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications:
1+ year(s) experience using Enovia
6 months experience in fixture fabrication
Experience with hydraulic/pneumatic design

Additional Information:
Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and client PDM.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-09273
Job Location: Helena, MT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: July 1
Input Date: 06/04/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 3
(U.S. Citizenship Required*)
Helena, MT
2018-6094

Responsibilities:
• Investigate and develop complex equipment and tooling concepts/specifications to satisfy aerospace product design & build requirements.
• Participate in design reviews, collect design requirements, create and revise drawings and models, research the application of robotics, automation and new technology to support the build plan.
• Create off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Check designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develop and document equipment & tooling inspection/usage instructions, preventative maintenance plans, and user training.
• Provide technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
• Maintain hardware and software configuration.
• Assess and make recommendations for disposition of equipment and tooling.

Qualification:
• 5+ years of experience using CATIA V5
• 2+ years of Tool Design experience
• GD&T Standards Training
• 1+ year experience with CATIA V5 advanced surfacing knowledge
• Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and PDM.
Preferred:
• 1+ year(s) experience using Enovia
• 6 months experience in fixture fabrication
• experience with hydraulic/pneumatic design

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6094
Job Location: Helena, MT
Rate: Based on experience
Duration: 21 Weeks, 1 Day
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III (Helena, MT)

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications: 5+ years of experience using CATIA V5 2+ years of Boeing Tool Design experience GD&T Standards Training 1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications: 1+ year(s) experience using Enovia 6 months experience in fixture fabrication experience with hydraulic/pneumatic design

Additional Information:

Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and Boeing PDM.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipToolDesMT
Job Location: Helena, MT
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/31/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 6-7 months Description: Key Skill Needs: - Experience leading control system design projects for aerospace and/or automotive industries. - Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment. - Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers. - Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment. - Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc). - Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability. - Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners). - Systems thinking and ability to isolate issues from a variety of interlinked systems. - Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.) - Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects. - Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.) - Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment. - Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc. - Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively. Preferred Systems Experience/Knowledge: - Siemens TIA Portal - Siemens Step 7 PLC programming software - Siemens WinAC RTX - Siemens SINUMERIK 840 D SL System Maintenance and Programming - Siemens SIMOTION software - Siemens HT8 and HMI Pro software - Siemens WinCC Advance and WinCC Flexible HMI programming software - Siemens SCALANCE industrial network switches X408, X308, X208, etc... - Siemens Simatic IT software suite - Sunrise AGV software - Siemens PROFINET Primary Setup Tool - SICK Safety Scanner Configuration & Diagnostic Software (CDS) - Kepware or similar OPC software Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-08984
Job Location: Everett, WA
Input Date: 06/05/2018
Firm Name: ICONMA LLC
Attention: sachin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer
 
Job Number: 18-08984
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: 6/23/17
Input Date: 05/30/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA & ASIC Design/Verification Engineer

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: R13869
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity

Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.

Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 365895
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineer 4 / CREO / CA

Description:
18000483/162029
Job Title: Ground Product Design Engineer 4
Job Category: Engineering

Work Site: Redondo Beach, CA 90278
Job Number: 1657
Max Pay Rate: 67.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract


Job Summary
Northrop Grumman is currently seeking a Design Engineer to support test set development for EPS-R. Position will require selected candidate to create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables. The selected candidate will be responsible for drawing documentation, design updates and working with mechanical and electrical engineers. Selected candidate must be adept at working independently as well as in a collaborative team environment. Candidate should be able to communicate well verbally and written, and be attentive to detail.

Job Description

Qualifications and Education Requirements
•Minimum 5 years of experience working in industry
•Experienced in ProE/CREO
•Knowledge with electro-mechanical design/products

Preferred Skills
Clearance

•AutoCAD
 
Job Number: MB-1657S
Job Location: Redondo Beach, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 07/25/2018
Last Updated: 09/17/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Current Mechanical Systems Hydraulic DER
• This position will need the following delegations on Chart C1, Systems and Equipment (Mechanical Equipment): B1, B2, B7, F1, F2, F7, G1, G2 and G7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-229
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 218
Job Location: Greensboro, NC
Rate: Up to $60.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/01/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer 3 / Ability to obtain Secret Clearance CA

Description:
1642
Logistics Engineer 3 (Job Number: 18006742)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 28, 2018

Target End Date: May 24, 2019

Pay Rate: $42/hr

Work Schedule: 9/80

Location: Redondo Beach, Ca

Duration of Assignment: 1 year

Clearance: Ability to obtain Secret


Responsible for the technical coordination, planning, execution, and management of NGAS-derived support and deliverables within the broader F-35 Maintenance, Repair, Overhaul and Upgrade (MRO&U) competency. Position involves significant collaboration with engineering, supply, operations, program office and customer stakeholders to conceptualize, develop, mature and brief/solicit government approvals of comprehensive retrofit projects. Develops corresponding Basis of Estimate documentation conveying technical scope and rationale for NGAS deliverables and labor projections. Support and review modification engineering, Time Compliance Technical Directive (TCTD) manuscripts and provide virtual support for associated verification events. Candidate may be required to routinely work extended hours and weekends to meet program objectives. Lead modification tools and tooling development activities and coordinate for related inspections, fielding and engineering support. Must possess excellent interpersonal, written and oral communication skills and experienced leveraging Microsoft Office suite applications. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex technical and logistical challenges involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

• Bachelor of Science degree from an accredited college in Aerospace Engineering, Mechanical Engineering, or related field of study is required
• 5 years of experience related to aircraft modification, maintenance and related logistical operations.
• Prior aircraft tooling development, verification and utilization experience.
• Applicant must be proficient in Windows, MS Word, Excel, Access and Power Point
• Verbal, writing, presentation, and leadership skills are essential.
• Ability to obtain a Secret clearance
• US Citizenship

Preferred Qualifications

• Understanding of Project Management fundamentals
• Familiarity with F-35 air vehicles a plus
• Current Active Secret Clearance
 
Job Number: MB-1642
Job Location: Redondo Beach, CA
Rate: 42/hr max
Per Diem: no
Duration: 1 year
Input Date: 06/12/2018
Last Updated: 07/09/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL DESIGN ENGINEER

Description:
Johnson Service Group is looking for a Mechanical Design Engineer.

Candidate should be a mechanical design engineer with aerospace background or good mechanism experience.
Solidworks experience is required.
Candidate should understand technical requirements, able to develop design concepts that could meet the requirements, use basic calculations or design practices to verify that they are met, model/document the design fully, and assist in the integration and/or testing of the design.
 
Job Number: 365812
Job Location: Pasadena, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 12+months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 07/27/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER (with Aerospace experience)

Description:
This position will support mechanical analysis projects supporting aircraft weapon system programs. Specifically, the engineer will provide analyses, planning and draft documentation to address mechanical, electrical or avionics systems safety, suitability, and effectiveness requirements. The engineer will perform Failure Mode and Effects Analysis, Subsystem Hazard Analysis, engineering and configuration analysis, and develop engineering technical requirements for aircraft mechanical, electrical or avionics system components. Tasks include but are not limited to engineering evaluation, analysis, and recommended disposition of technical assistance requests for aircraft mechanical, electrical or avionics systems. The engineer will use SolidWorks or other CAD programs to create 3D models of aircraft mechanical, electrical or avionics components. The engineer will develop and manage large MS Excel spreadsheets. The engineer will write technical reports detailing analyses in MS Word as well as Adobe Pro. This position may be tasked to support similar duties on various other USAF weapon systems.
Required Skills & Experience
Bachelor’s Degree in a Mechanical or Aerospace Engineering discipline from an accredited University with six (6) years of experience.

Preferred Qualifications:
Master’s Degree in Engineering
Experience working on aircraft (Civilian/Military) mechanical, electrical, or avionics systems

Desired Skills & Experience
The ideal candidate will have:
Aircraft systems experience
Knowledge of finite element analysis techniques and SolidWorks or AutoCAD
Ability to interpret failure data from multiple DOD maintenance databases
Develop and manage large MS Excel Spreadsheets
Coordinate with other technical personnel in solving technical problems, gathering information, cost estimates and specifications
Compile and prepare comprehensive technical report
Work in a team environment and possess good communication skills, both written and oral
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0015
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: No
Input Date: 06/08/2018
Last Updated: 06/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required

ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: Mojave, CA
Rate: $65.00
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/13/2018
Last Updated: 09/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-255
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 08/13/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-234
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $45


Unique Skills:

Basic understanding of Lean Manufacturing Tools and Processes preferred


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 9187
Job Location: Savannah, GA
Rate: $45
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Manufacturing planning experience preferred with Solumina and SAP experience.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9223
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****


PREFERRED: Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9169
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: Mojave, CA
Rate: $75/hr. DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field.

Sr. Mass Properties Engineer with 10+ Years of experience
Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Must be a problem solver capable of working alone or with a technical team in a fast paced environment.

Note: Ability to obtain/maintain a security clearance may is required.

The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CO
Rate: $55-$63/Hr., DOE
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: May 2018
Input Date: 05/24/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Material Handler - CA

Description:
Chipton-Ross is seeking a Material Handler for an opening in Mojave, CA.

RESPONSIBILITIES:
The Material Handler will have experience in materials movement as it relates to the Oracle ERP system, inventory controls and movement, at the dock, and on the shop floor. The Material Handler will pick and put away materials (including raw materials, work in process, consumables, and finished goods), as well as deliver them to the necessary locations on the shop floor to facilitate the manufacturing operations of the LauncherOne program.

This position will also need to be able to back-up the Shipping and Receiving Clerk functions within the Supply Chain organization. This will require knowledge and use of the ERP system in order to perform shipping and receiving transactions accurately and efficiently as well as preparing outbound transport, packing, labeling, bar code scanning, and documentation.

Ideal candidates will have a work history that demonstrates the ability to operate successfully in an environment that requires exceptional attention to detail. Prior experience in a fast-paced manufacturing environment is required. Experience with new product introductions, lean manufacturing, cost and quality optimization along with material flow on the production floor is highly desired.

-Perform accurate transactions for material movements, transactions, and receiving within the Oracle ERP system.
-Maintain accurate inventory, perform cycle counting, and physical inventory of stock.
-Certified to operate a forklift, plus the know how to use other mechanical equipment in a warehouse environment.
-Move materials and items from receiving to production areas in designated storage to inbound locations.
-Receive, transact, distribute, and store materials, tools, equipment, and products within assigned area.
-Perform breakdown and kitting functions, as needed.
-Quickly and safely perform material movements, unloading and loading of vehicles according to procedures.
-Maintain records of all receipts in compliance with company requirements, verify all incoming documentation and applicable certifications are available and accurate to shipment.
-Adhere to all administrative and safety procedures, specific material handling and storage requirements.
-Actively care for and maintain capital equipment for the storage and movement of material.

REQUIRED EXPERIENCE:
-A minimum of two years prior experience as a Material Handler is a must to be successful in this role.
-Experienced with MS Office and ERP systems.
-Must be able to handle hazardous and special handling materials.
-Experienced in shipping and receiving procedures and work instructions.
-Work all shifts and available for overtime as well as weekends when needed.
-Able to stand for extended periods - 8 hours min.
-Able to stoop, bend, crawl, and being able to maneuver in tight spaces.
-Physically able to handle items weighing up to 40lbs (unassisted).
-Certification to operate forklift truck and ability to operate pallet jack.


PREFERRED EXPERIENCE:
-Bachelor's Degree in Computer Science or in "STEM" Majors (Science, Technology, Engineering and Math)
-Certifications or similar within aerospace, aviation or automotive.
-Graduated from a technical college or other recognized apprenticeship.
-Minimum of 2 years' experience in aerospace, aviation, or automotive industries preferred.
-Knowledge and understanding of lean manufacturing and its application to material flow and inventory management is beneficial.
-Creative problem solver, able to work in multi-disciplinary teams.
-Excellent interpersonal skills.
-Excellent organizational and problem-solving skills.
-Ability to work in both R&D and production rate environments.

EDUCATION:
-High school diploma or GED required.

WORK HOURS:
-Full Time
 
Job Number: 162151
Job Location: Mojave, CA
Rate: $18 to $28.00 DOE
Duration: 10 Months
Input Date: 03/26/2018
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Mech Sys Design & Anlys Engr 3 - (2) - PA

Description:
Chipton-Ross is seeking 2 Mechanical Systems Design & Analyst Engineers 3 located in Ridley Park, PA

RESPONSIBILITIES:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally... Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Additionally....

"Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred."

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

For Client, IF within an Engineer Job Code, Title: ENGINEER, Client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or related discipline. Job Req may be more specific. (read job req for clarification)

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

Resumes must be up-to -date

 
Job Number: 166669
Job Location: Ridley Park, PA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/25/2018
Last Updated: 11/17/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

 

For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


 
Job Number: 1710067688
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/03/2017
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000012YKOAA2&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
3rd Shift Position
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 

 
Job Number: 1610059718
Job Location: KS City, MO
Duration: 12 months
Input Date: 11/07/2016
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Checker - Tech Spec I

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Check 2D engineering data and 3D models for conformance to Gulfstream requirements as directed
• Check parts for fit, form and function to the extent that information is available.
• Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets.
• Checkers are responsible for determining the acceptability of data in the following areas:
o Accuracy and completeness of engineering product definition data, including CAD and PDM data.
o Proper application and compliance with all Engineering and customer drawing requirements.
o Use and understanding of GD&T a must.
o Dimensioning and tolerancing including familiarity with ASME Y14.5.
o Application of best drafting and design practices and procedures.
o Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
o Advise Design personnel regarding GAC drawing and design practices and procedures.
o Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
o Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
o Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
o Knowledge of GAC parts list & PdocM, a plus.

Principal Duties and Responsibilities:
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-260
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 YR Plus
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler

Description:
Major functions:

" Ability to comprehend and follow written work instructions

" Assemble fabricated parts into subassemblies and/or complete systems using precision equipment

" Accurately record operational data into computer database and work routers

" Set up & operate production equipment in accordance with written work instructions

" Ability to work with RTV and epoxy

" Communicate any issues that may arise to supervisor/engineer

" Responsible for maintaining housekeeping and 5S in assigned production area



Education/Experience:

" Minimum one year in a Lean Manufacturing assembly environment, preferred

" High School education or equivalent

" Quality conscious and has great attention to detail

" Positive attitude, proactive, and flexible with changes in production

" Dependable attendance history

" Must be able to work overtime when required
 
Job Number: 18-16388
Job Location: Londonderry, NH
Rate: 15.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-03 00:00:00.0
Start Date: 2018-04-30 00:00:00.0
Input Date: 04/24/2018
Last Updated: 09/07/2018
Firm Name: NESCO RESOURCE
Attention: Pamela Young
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
'Must be able to acquire DoD Secret clearance, but can start without clearance or with Interim Secret clearance.”

Selected candidate will perform conceptual, detail structural design, analysis, testing and producibility of system components. Candidate must be proficient in the use of Catia AND Creo large model assemblies, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers. The candidate will be required to work closely with Production Operations to develop producible solutions.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 42387
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/11/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
US Citizenship is required

Description/Comment:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electro-mechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional Job Details:
Familiarity with aerospace design practices including designing for light weight design and random vibration environments; working knowledge of geometric dimensioning and tolerance analysis; modeling and drawing creation in Creo/Pro-Engineer. Experience with internal designed hardware on the EMU,ESOC and Space Station programs is a plus.

Education:
Bachelor's Degree


Hema Murali
Senior Technical Recruiter
Apollo Professional Solutions, Inc.
hmurali@apollopros.com
Tel: 860-254-6337
 
Job Location: Windsor Locks, CT
Rate: 48
Per Diem: Yes
Overtime: N/A
Duration: 12 months
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Hema
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Houston, TX
Duration: 1 year contract
Pay Rate: $48.25/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO'****
****MUST HAVE A DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES****

Job Description:
- ***CRITICAL: CANDIDATE MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO'***
- Candidate must also have the ability to produce and check drawings conforming to ASME Y14.5 and to support, and verify design with standard hand calculations for form, fit, function, and structural strength.
- ***CRITICAL: DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES ARE A MUST***
- Knowledge of the standard design process is a must.
- This engineer should be able to prepare reports of results of analysis and experimentation, and the ability to present design content at various design reviews must be evident.

Requirements/Education:
- Bachelor's Degree
- 5 - 10 years of experience
- Strong analytical and problem solving skills are essential;
- Pro-Engineer/CREO knowledge for model, layout, and drawing creation;
- Finite element analysis tools (ex. ANSYS, Pro-Mechanica, NASTRAN/PATRAN) and able to perform linear stress analysis based on the experience, vibe and shock, fatigue;
- Hands on and Service mentality Design for Manufacturability.
- Good verbal and written communication skills.
- Excellent team skills.
- Ability to prioritize work independently with little direction while staying on task.
 
Job Number: 9134
Job Location: Houston, TX
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 05/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Eglin AFB, FL
Rate: $35.00 - $55.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Description
CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY. This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- Experience with Catia V5 3D parametric modeling and drafting
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives
- Active DoD secret clearance

Desired:
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software
 
Job Number: 9636
Job Location: Crestview, FL
Rate: $35.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 08/29/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer SECRET CLEARANCE needed UTAH

Description:
Active Secret DoD Clearance within 5 ½ years of last investigation
Bachelor’s Degree in Aerospace, Mechanical or Manufacturing
Experience in working with aerospace specifications and drawings
Experience in the use of ANY CAD systems (NX -preferred)
Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment
Knowledge of root cause / corrective action processes and techniques
Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)
Functional knowledge of production control systems (SAP/Visual Mfg/etc)
Experience authoring, modifying and auditing procedures
Experience estimating, planning, and streamlining manufacturing processes
Experience using SPC to monitor and improve processes
Experience addressing manufacturing discrepancies through a formal MRB process
Good organizational skills and ability to work with minimal direction
Excellent computer skills. Skilled in working with Microsoft Office applications
Strong problem solving skills
Excellent verbal and written communication skills
Preferred Skills and Experience:
Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience
 
Job Number: 2963
Job Location: promontory, UT
Rate: 60-100+ / Hr
Per Diem: YES
Overtime: Possible
Duration: 6 - 12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 08/21/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Mechanical Designer
Englewood, CO
12+ month contract

The position is expected to provide the highest level of creativity and energy to the new product development process. Responsible to support the Engineering Department and Project Engineer by providing mechanical design data in support of Program Directives

Min years of experience: 10 – 15 years experience

Degree Requirements: Associates Degree (AA) or equivalent

Qualifications:
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

Education & Experience:
•Associate’s degree (A.A.) or equivalent from two-year college or design engineering/drafting technical school; and 10-15 years’ directly related experience with aircraft mechanical systems and/or training; or equivalent combination of education and experience with an emphasis on aircraft systems.
•Ability to Interpret and use aircraft manufacture’s maintenance manuals, equipment installation instructions, and wiring diagrams
•Knowledge of test equipment
•Understanding of FAA certification processes, aircraft operations, and electrical/communication and navigation systems

Skills:
•Good troubleshooting technique skills
•Excellent organizational skills, detail oriented, ability to prioritize and multi-task and meet deadlines.
•Excellent written and verbal communication skills

Computer Skills:
•Proficient with Microsoft Suite, including Word, Excel, Access and Outlook
•Prior technical knowledge, training and experience in Solidworks, with a minimum designation of Associate.

Certificates, Licenses, Registrations:
•FCC license and/or FAA repairman certificate preferred
 
Job Number: 54222
Job Location: Englewood, CO
Rate: OPEN
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer
Carlsbad, CA
6+ month contract


Summary: With minimal supervision, this position is responsible for, but not limited to, contributing to varied projects and products for the development of products, manufacturing processes or production equipment. This position will be assigned a wide range of development tasks to support the technical needs of the Company.

REQUIREMENTS
•Knowledge of CAD and Pro/Engineering.
•Active Secret Clearance
•Composite layup experience
•Experience with manufacturing processes
•Working knowledge of Microsoft Windows.
•Strong practical technical ability.
•Ability to work in a fast-paced environment.
•Good organizational and communication skills, both written and oral.

EDUCATION / EXPERIENCE
•Associate Degree in a technical discipline or equivalent experience.
•10+ years of experience directly related to specific responsibilities described.


RESPONSIBILITIES
•Independently analyze and improve existing products, equipment, processes, or designs as assigned.
•Develop products, manufacturing methods and processed in the production of components and methods to reduce manufacturing costs.
•Investigate, establish and implement requirements for equipment, tooling, materials and methods of manufacturing, including facility layout as required for new or revised products.
•Create documentation to support existing products, processes and equipment in accordance with ISO 9001 requirements.
•Design and implement products, processes, equipment, and documentation for all new projects.
•Participate in cost reduction and cost of quality programs.
•Assist maintenance in troubleshooting and repair of equipment.
•Assist Operations Managers in solving production constraints.
•Assist Engineering with the design and prototyping of new or modified products.
•Support production and development of new products through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention.
•Independently conduct process capability studies, design experiments, conduct studies and analyze to ensure products meet requirements.
 
Job Number: 53912
Job Location: Carlsbad, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Responsibilities



  • Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable

  • Perform autonomously under the direction of team leaders, program management and engineering management

  • Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach

  • Contribute to schedule creation and ensure schedule commitments are met

  • Create and present program and/or task status presentations to team members and engineering management

  • Create and present clear and concise technical descriptions to engineering leadership and customers

  • Mentor junior engineers and provide guidance to design manufacturing team members

  • Provide input to design and document reviews

  • Spearhead investigations for open ended complex problems

  • Develop detailed hardware requirements based on product theory, system level requirements and customer requirements

  • Complete designs that meet documented hardware requirements

  • Create test procedures to support the testing of products to industry and government standards

  • Review hardware defects and identify systemic root causes and process improvements


 


Basic Qualifications



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering

  • US Citizenship or Permanent Resident (Green Card) required

  • Experience in mechanical engineering design and development

  • Knowledge of engineering materials and processes

  • Experience with structural and thermal management design

  • Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)