Job Search Results

893 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/21 Sunday 01:03AM Pacific Time by ContractJobHunter. )

Listings 1 - 893

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2182 - LIAISON ENGINEER - resume - word doc only

Description:
Be responsible for providing engineering support to the production operations at the St-Laurent Assembly

Business Unit (Challenger, CRJ, CSeries, Global & Airbus) and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

University degree in Mechanical Engineering.

You have MRB experience in the Aerospace field.

You possess Catia and MRB (Material Review Board) work experience.

This position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

You must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)

Bilingualism would be an asset.
 
Job Number: 2182
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2205 - STRUCTURAL GROUND. TEST INTEG. - resume word doc only

Description:
Lead multi-functional ground test review meetings.

Coordinate EXP internal activities to meet schedule and budget.

Work in close relationship with EXP Management and Program team.

Provide detail schedule and Status Report.

Execute EXP Test Portfolio following established priorities.

Interact technically with Client Suppliers to achieve Montreal site mandate.

Work in close interaction with Shop and QC (union staff).

Manage budget/operating plan definition and periodic tracking.

Prepare presentations and information for upper management.


Have a Degree in Mechanical engineering or equivalent experience.

Have a minimum of five 5 year experience in the aerospace industry, with close interaction with engineering and production teams.

Have strong communication skills both in English (written, spoken) and French (spoken).

Have good knowledge of MS Project (intermediate or advanced user).

Are a strong team player and can demonstrate superior organizational and leadership skills.

Are driven by results and autonomous.

Previous experience in Project Management is required.

A positive attitude and able to work in a fast-paced, high-pressure environment.

Must have strong communication and negotiation skills.

Must have excellent troubleshooting skills.

Must have Excellent Presentation Skills.
 
Job Number: 2205
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2210 - INDUSTRIAL ENGINEER - cv. word doc only

Description:
Design, balance and updating of follow-up charts of production work.

Draw the diagram of prior artwork, and identify the critical path for each position in a lean manufacturing mindset.

Establish and monitor the progress of off-position work plans in Toronto for the Global 7k / 8k cockpit.

Participate in the development of tempo change scenarios;

Calculate manpower requirements.

Perform time measurement (observation and or time studies).

Participate in the identification of bottlenecks and complete capacity calculations.

Participate in harmonization of changes and their implementation.

Achieve different levels: technical manuals, classifications and approvals solid models and assemblies.

Analyze and verify CATIA 3D models.

Identify sources of waste in the process and propose solutions for improvement.

Monitor and follow the action plans needed to reduce production hours.

Have A College diploma or bachelor%u2019s degree in Industrial Engineering, Mechanical engineering or equivalent

Have a minimum 8 manufacturing experience

Technical knowledge in manufacturing, aerospace structure or aircraft interior finishing is an asset

Have the knowledge of the lean manufacturing principles and the use of visual stream mapping (VSM)

Master the computer software design CATIA V5

Master CAD database such ENOVIA and VPM Nav.

Master Microsoft Excel.

Possess strong problem solving skills.

Possess strong abilities in adaptability, flexibility and team player.

Bilingual - master both French and English

Are available to travel to Toronto if needed.
 
Job Number: 2210
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2215 - DESIGNER & STRESS ANALYST - cv - word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Must have experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5
-GD&T and technical drawings
-Certification rules
-Manufacturing requirements

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2215
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2217 - AIRCRAFT PERFORMANCE ENGINEER - cv word doc only

Description:
Attend flight test brief/debrief for performance flight test points

Provide fast turnaround evaluation of test points (pass/fail) prior to next flight.

Data reduction of test points and creation/substantiation of aircraft performance models

Writing reports that will be used for demonstrating compliance with Airworthiness regulations

Creation of data for use in Aircraft Flight Manual Performance section (takeoff and landing data).

Creation of data for use in the Flight Planning manual (climb, cruise and descent data)

Creation of data for use in the Quick Reference Handbook.

Provide support to the Flight Management System database generation and testing (both certified and non-certified data).

Provide support to various performance studies and analysis as required by the client.


Bachelor's degree in Aeronautical (or Mechanical) engineering as well as a minimum of 5 years of experience in the domain of aircraft performance during the development, certification and/or in-service support of aircraft;

Possess good interpersonal skills in order to work in team and interface with other groups, suppliers and management as well as good written and oral communication skills in English.
Good programming skills (FORTRAN, Visual Basic) and a working knowledge of a UNIX operating system environment;

Work independently and demonstrate initiative to achieve the goals established for you and work well in small, dynamic environment.

English - French working knowledge an asset.

Prior Testing Experience (Flight or Ground) is an asset.

Must be customer-oriented with innovative problem solving skills.

Must have excellent troubleshooting skills.

Must be detail oriented.

Knowledge of certification requirements is an asset.

Must have a positive attitude and able to work in a fast-paced, high-pressure environment.

Must be familiar with Aircraft Flight Manual Data.

Knowledge of French would be an asset;
 
Job Number: 2217
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2219 - FLIGHT SIMULATION SPECIALIST - resume word doc only

Description:
Develop aircraft simulation models. These models are used in the design and validation process of a new aircraft, in support of in-service aircraft and for incident investigation. The models are also deployed in training simulators used to instruct flight crews throughout the world. Flight simulation engineers support the qualification of these flight crew training simulators with regulatory authorities.

Use data from computational fluid dynamics, empirical aerodynamic estimation methods, wind tunnel tests and derive aerodynamic derivatives from flight test data to conceive and update the simulation models.

Develop and maintain bombardier's pilot-in-the-loop engineering flight simulators and participate in planning and testing of new and existing designs, in collaboration with flight test crews.

Interact closely with the stability and Control, System Simulation, Fly-by-Wire, Loads, Systems Engineering and aircraft/engine performance groups, and flight simulator manufacturers.

Use state of the art software, such as Matlab/Simulink, MAtrixX/SystemBuild, to develop the simulation models. In addition, customization and automation of these tools is achieved through programming in C/C++ and other software packages.


Have a Bachelor's or master's degree in Aeronautical (or Mechanical) engineering as well as a minimum of eight (8) years of relevant experience in the Aerospace industry.

Have good knowledge and experience in simulation model development, real-time simulation, flight dynamics, flight testing, test data analysis and application of North American and European simulator qualification requirements.

Have good programming skills. Knowledge of Windows and UNIX operating system environments, Matrixx/SystemBuild, Matlab/Simulink, MS Word, MS Excel, MS Powerpoint are essential.

Have good written and oral communication skills.

It would be an asset to have good knowledge and some experience in wind tunnel testing, flight testing, test data analysis and the application of the FAA/EASA Part 25 certification requirements, along with PV-WAVE, Frame Maker.

Have a thorough understanding of flight simulation model generation for design, rig and pilot training purposes.
 
Job Number: 2219
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2222 - PROPULSION SYSTEM INTEGRATOR - CV - word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports;
Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.


Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2222
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2223 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Responsible for integration of the flight control, hydraulic and/or landing gear systems on Client platform.

Prepare and define system specifications and requirements,

Prepare and review analysis, design change proposals, tests and certification requirements.

Coordinate product development activities between the supplier of the system and the affected work packages.

Resolve technical problems using accepted methodologies in a cross functional environment.· Be responsible for integration of the flight control, hydraulic and/or landing gear systems on Client platform.

Prepare and define system specifications and requirements,

Prepare and review analysis, design change proposals, tests and certification requirements.

Coordinate product development activities between the supplier of the system and the affected work packages.

Resolve technical problems using accepted methodologies in a cross functional environment.

Bachelor or Master's degree in Mechanical or Aerospace Engineering. AME license is an asset.

Have a minimum of eight (8) to ten (10) years related experience in design, integration, development and certification of Hydro-Mechanical Systems.

Are familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Have experience in providing engineering support to the assembly line / production.

Have strong communication skills, ability to work well in a multi-disciplinary team environment.

Are motivated, organized, autonomous and able to work under limited supervision.

Are proficient in MS Office software and knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2223
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2226 - CABINET INTEGRATOR - resume - word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.


Bachelor's Degree in Mechanical or Equivalent Engineering or college with a minimum 5 years of relevant experience.

Familiar with the CATIA V5 3D design tool.

Must have experience in the design or installation of cabinets to be assembled.

You are well organized and focused on projects.

Must have good oral and written communication skills in English and French.

Able to work in a multidisciplinary teams, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.
 
Job Number: 2226
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2227 - DESIGNER - INTERIOR CABINET - resume - word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations of the client's Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets the company standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.


Must have a bachelor's degree in Mechanical Engineering with a minimum 15 years of relevant experience.

Must be knowledgeable in 3D design with CATIA V5/Enovia PLM.

Must have design experience in cabinet assembly design and/or cabinet installation.

Must have excellent English communication skills written and spoken, French working knowledge would be an asset.

Must have a good command of various software (MS Suite, Outlook, Acrobat, etc.).

Practical knowledge and experience in aircraft structure and completion components would be an asset.

You are well organized and project oriented.

Team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.
 
Job Number: 2227
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/17/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2236 - INTERIORS INTEGRATOR - cv - word doc only

Description:
Perform engineering integration of cabin systems.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues
impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and accumulated at least five (5) years of experience with aircraft mechanical systems.

Experienced with project and Supplier management.

Bilingual (French - English) written and spoken.

Ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Must be proficient in 3D design with CATIA V5.

Must be customer-oriented with innovative problem solving skills.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred).

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is an asset.

Must be capable of obtaining Design Authority status.
 
Job Number: 2236
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

A&P Mechanic-Intermediate

Description:
PDS Tech is seeking a Senior A&P Mechanic for an open position in Indianapolis, IN.
In your role, you will:

  • Repair and maintain components used for aircraft airframe and power plant.
  • Inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems.
  • Maintain records related to the maintenance performed on the aircraft.
  • Conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors.
  • Repair or replace worn or defective parts.
  • May also repair sheet metal or composite surfaces. Mechanics rely on the pilot’s description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.
  • Perform routine inspections and troubleshooting, including airframe structures, engines, and aircraft system.
  • Perform all airframe, power plant and propeller repairs and modifications required to meet company and FAA requirements.
  • Removal and disassembly of defective parts; assembly and installation of replacement parts; and testing aircraft system.
  • Operate all power tools and equipment necessary to accomplish job assignment.
  • Complete all required maintenance records.
  • Accurately record time worked on a work order.
  • Present a clean and neat work area to our customers.
  • Interpret technical manuals, drawings and blueprints.
  • Tow and park aircraft.
  • Perform other aircraft maintenance work as may be required.
  • Perform varied additional duties as assigned.


For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status


 

o High school education or equivalent
o A&P license
o Use of arithmetic, blueprints, and specifications plus knowledge of jet an piston airframe and engine principles
o Minimum of 2 years experience as a licensed A&P Mechanic. One year required on Cessna, Hawker, or Beechcraft aircraft performing inspections and repair of aircraft.
 
For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status

 
Job Number: 1710065657
Job Location: INpolis, IN
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021YtmAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C/C++ VxWorks Embedded SWE

Description:
Programming Languages: C, C++, and C# CM Tools: Perforce, GIT, Accurev, Source Integrity Compilers: VxWorks, Unix, Lynx.OS, Visual Studio IDEs: Workbench, Eclipse, Visual Studio Technical
Degree - Electrical, Computer Engineer or Computer Science
Preferred: Experience with VME Bus Programming as well as working with VxWorks board support packages
 
Job Number: 7266799
Job Location: multiple
Rate: Market
Per Diem: Split
Duration: 6-12 months
Start Date: ASAP
Input Date: 10/13/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39771
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/23/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Powerplant / APU

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


Varying Responsibilities:
Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
Evaluate certification methods of compliance.
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Participate in ground and flight tests as required.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Occasional international travel may be required.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Relevant work experience related to aircraft design, test, and certification.
Experience related to APU and/or powerplant systems and integration with the aircraft.
Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
Consulting and direct hire opportunities available.
 
Job Number: #205-APU
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Program Manager

Description:
Currently seeking full-time and contract Program Managers to fill openings with an aerospace flight test, engineering and certification organization located in Moses, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs.
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a
The Program Managers responsibility consists of supporting management of programs through the program lifecycle to achieve or surpass the capability, schedule, and financial performance of customer programs. This position acts as primary customer contact for a programs status, deliverables and cross-disciplinary technical leadership, across a multitude of external contacts and internal team members to ensure customer requirements and expectations are met. Program Managers may also be responsible for overseeing the similarity review process to ensure aircraft components meet certification requirements.

Duties & Responsibilities
• Communicate with potential client to determine scope of project for desired services, timeline and cost sensitivity.
• Conduct internal reviews to determine program staffing to ensure technical skills are paired with technical needs at the appropriate time.
• Create business proposals including schedule, deliverables, and cost.
• Provide business proposals to potential clients and negotiate terms.
• Partnering with Contracts, finalize business proposals including ensuring contract conditions minimize company risk.
• Develop control systems that accurately measure progress of schedule, risk, and technical performance and with sufficient time for corrective action should issues arise.
• Manage program budget, identify and mitigate potential over-runs before they are realized.
• Manage relationship with client throughout project
• Review component qualifications through similarity comparison to ensure they meet certification requirements.
Requirements
• Four (4) year degree in Engineering or equivalent Technical Program Management experience
• 5 + years of relevant experience
• Working knowledge of Part 25 Requirements and Aircraft Certification process desired.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
Aircraft Door Design Engineer
Location: Southeast
Duration: Long term contract: 12+ months
Rate: Open, DOE

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential


General Summary:
 
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components.  The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
 
Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA Version 5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
                                                   
                            
Qualifications
 
Education, Work Experience, Certification and/or Licensure: 
 
BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience
Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP
 
 
The Structures Company LLC is an AA/EOE.
 
Job Location: southeast, NC
Rate: "open"
Per Diem: yes
Duration: 12+ month
Start Date: asap
Input Date: 10/05/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Engineer

Description:
Bachelors Degree in Engineering and experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development
Review all openings posted at www.hi-tecsolutions.com/jobs
 
Job Number: 112881
Job Location: Savannah, GA
Rate: 70-77 hourly
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 08/25/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanical Systems Design Engineers

Description:
Aircraft Mechanical Systems Design Engineers Needed.

Mechanical Systems Design/Integration (Catia Routing)

PRIMARY RESPONSIBILITIES INCLUDE:
Execute conceptual and preliminary airplane design in a thorough, imaginative, and practical manner, including:

Sizing and layout of airplane configuration, including aerodynamic, control, structure, propulsion, and supporting systems
Assessment of vehicle performance
Estimation of structural loads using computational and analytic technique
Perform design optimization of the primary system elements within given constraints.
Employ analytical, empirical, computational, and experimental techniques to assess subsonic and transonic aerodynamic characteristics of aircraft
Articulate formal design reviews and present design data to internal and external customers.
Requires a BS in Aerospace Engineering or Related Field with 10+ Years
SKILLS REQUIRED:
Candidates will have strong knowledge and practical experience in aircraft design, basic sizing, configuration layout, trade studies,
Experience in aircraft dynamics, and controls;
Experience in structural layout & design of primary load paths
Experience with civil transport airplane systems
Working knowledge of civil airworthiness requirements for transport category airplanes
Knowledge of FAA Part 25 and EASA CS 25 regulations

Note: Ability to obtain/maintain a security clearance may be required.

The Structures Company LLC is an AA/EOE.
 
Job Location: CO
Rate: Open - DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Quality Control Inspectors - Goodyear, AZ

Description:
STS AeroStaff Services is hiring Aircraft Quality Control Inspectors for open positions in Goodyear, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Inspector completes evaluations of aircraft, engines and components to determine their condition against established standards and performs inspections of work completed by Aircraft Maintenance Technicians (AMT) to verify compliance with approved data. He/She performs work within budgeted time and within client, FAA, and customers’ standards of quality. The Aircraft Inspector is responsible for the effectiveness of client’s inspection function, ensuring compliance with FAA Regulations and Customer requirements, and meeting customer quality expectations.

Job Duties:

• Maintain the daily operation of the Repair Station in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer’s recommendations
• Promote and support all client safety initiatives and programs
• Inspect, evaluate and perform surveillance of work performed by AMT’s
• Inspect aircraft and components by obtaining and interpreting work cards, reviewing inspection requirements’ scope and detail, completing visual inspection of aircraft areas opened by AMT’s including but not limited to fuel tanks, empennage, cargo areas, under floor area, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear
• Ensure that all work is performed using the correct approved data
• Ensure the quality of all completed work meets client and customer expectations
• Perform receiving inspection requirements for new and continued-service parts for serviceability, including but not limited to verifying certification from manufacture or overhaul facility and inspecting for shipping damage
• Conduct weight and balance analysis by using approved maintenance manuals and scales
• Perform NDT inspections if and as authorized on the client’s Management, Supervisory and Inspection Roster
• Ensure completion of logbook entries and “Return to Service” for work completed by the Repair Station
• Ensure proper completion of all client and customer work documents used by the Repair Station
• Comply with all client and customer training requirements
• Promote and assist with On The Job training for newly hired inspection personnel
• Provide technical guidance and assistance to maintenance personnel
• Exposure to the hangar areas while performing inspections
• Exposure to outdoor areas during hot and cold temperature extremes while performing inspections

Qualifications:

• 3+ years’ experience performing as an accomplished aircraft inspector on transport category aircraft
• Capable of interpreting drawings and blueprints to accomplish a specific task
• Must have exceptional written and oral communication skills and be able to interact with a wide variety of people
• Some computer skills (knowledge of MS Office programs such as Word, Excel) are preferred
• High School Diploma or Equivalent required
• Must possess a current Mechanics certificate with Airframe & Power plant ratings

Physical Requirements:

• Near-vision acuity – natural or corrected near-vision acuity in at least one eye, corrected or uncorrected, but be such that the applicant can read a Snellan equivalent of 20/25 (Jaeger number 2) letters at not less than 12 inches [30.5cm] on a standard Jaeger test chart
• This test will be administered annually
• Distance-vision acuity – natural or corrected distance-vision acuity in at least one eye, either corrected or uncorrected, must be better than Snellan equivalent 20/30 (Jaeger number 4 letters at not less than 18.0 inches [45.7cm] on a standard Jaeger test chart) This test will be administered manually
• Color contrast differentiation – capable of distinguishing and differentiating contrast among colors or shades of gray used in the method as determined by the employer
• This test will be conducted upon initial certification and at three year intervals thereafter
• Must be able to lift 50 lbs.
• Must be able to wear and breathe through a full-face respirator
• May be exposed to hazardous chemicals that require the use of safety equipment
• Must be able to bend, stoop, kneel, stand for prolonged periods of time, and climb ladders, stands, and operate man-lifts
• Must be comfortable with heights and confined spaces
• Normal or Corrected Hearing
• Visual acuity must be a minimum of 20/40 corrected
• Must be able to access all areas of the aircrafts

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39640
Job Location: Goodyear, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
Various shifts available. 

  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager.

Special Considerations:
Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
Exposure to machinery, chemical, biological, and physical risks is minimal. 
Position will require regular use of a microscope.

Additional qualifications and considerations: 
Experience using and comfortable with a microscope for assembly and inspection of parts. 
Experience working in a class 1000 cleanroom. 
Comfortable working with chemicals and using personal protective equipment. 

 

  • The minimum level of education required for ISC assignments is High School diploma/GED.
  • Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding.

 
Job Number: 1710069437
Job Location: Redmond, WA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K46JAAS&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

BFTC A/C Configuration Controller -WIC04059

Description:
PDS is looking for a BFTC A/C Configuration Controller:












In your role, you will:



  • Ensure (through discussion with Engineering and the Flight Crew) that proposed aircraft configuration changes, will not adversely affect upcoming ground or flight tests
  • Ensure that detailed aircraft configuration requirements (FTE Set-up Sheets) are met
  • Prepare, coordinate and authorize work to be performed on the aircraft, including development of the nightly work package
  • Act as the primary point of contact to authorize all work performed on the flight test aircraft
  • Prepare Pre-flight/Pre-Test Aircraft Configuration Briefing report and conduct briefings
  • Attend Post-flight/Post-Test debrief meetings and perform follow up coordination activities for discrepancies reported during testing
  • In coordination with Quality Assurance, plan and coordinate the timely execution of all Airworthiness Maintenance requirements, and maintain the tracking and timing of inspections, time life items and special maintenance items
  • Work closely with the Flight Crew and is familiar with the aircraft test schedule
  • Assist Lead Flight Test Engineer with the development of the short-term flight test schedule by providing input for upcoming maintenance, inspection and down time requirements.
  • Attend daily meetings associated with aircraft support issues and status briefings
  • Support offsite testing as required
  • Manage deferred maintenance items and coordinate resolution
  • Assist Project and Ground Operations with the development of downtime planning activities

























Qualifications












As our ideal candidate,



  • You must have 5-7 years of experience in the aircraft maintenance field as a Mechanic, Technician, or Inspector.
  • You must have 3-5 years of flight test experience
  • You must have the conflict resolution skills necessary to resolve daily issues in a professional manner
  • You must have a willingness to work weekend days and nights
  • You must have a willingness to work overtime
  • You must have a willingness to travel
  • You must be able to obtain a Canadian Work Permit


























 
Job Number: 1710068929
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JtHNAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

Knowledge, Skills and Abilities:
1. Ability to create 3D models utilizing CATIA V5.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-011
Job Location: Greensboro, NC
Rate: $50 - 60/hr May pay more DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
ACTIVE SECRET CLEARANCE
Multiple needs
•BS in Mechanical Engineering, or equivalent education and work experience in an engineering discipline
•Experience developing 3D models and detailed drawings
•Ability to develop innovative solutions
•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers
Desired Qualifications
•Experience using SolidWorks and AutoCAD
•Some directly related work experience
•Familiarity with aircraft cockpit systems
•Simulation equipment experience
•Existing security clearance
 
Job Number: 10004
Job Location: Broken Arrow, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6Mon+
Start Date: ASAP
Input Date: 07/31/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Chris Lombardi
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Operator

Description:
CAD Operator
Location: Richmond, VA
Duration: 6+ months

Qualifications:
- Must be proficient in AutoCAD
- Must be proficient using Windows based software and MS office 2000 or higher (Excel, Word, PowerPoint, etc).
- Must have strong organizational skills.
- Someone with a little bit of experience in the construction field.
- More along with electrical or mechanical construction, not electronic board layouts.
- Someone out of school with some experience and trainable.
- High school or equivalent education required.

Responsibilities:
- Receive project assignments from Design Team member.
- Under supervision, prepare construction drawings required to support the installation of electronic special systems (fire alarm, security, access control, and other low voltage specialty systems). Electronic systems drawings will typically consist of items such as floor plan layouts, riser diagrams, electrical interconnections drawings and installation terminations.
- Prepare submittal documentation (i.e,. data sheets, battery calculations)
- Maintain project drawing files, and associated records and documentation tracking & maintaining as-built drawings
- Perform other duties as assigned.
 
Job Location: Richmond, VA
Rate: Open
Duration: 6 months
Start Date: Asap
Input Date: 09/06/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CATIA Designer

Description:
Technical Designer 2

Location: Fort Walton Beach, FL
Duration: 6 months

Description:

Wiring Installation Design
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision. CATIA V5

Education / Experience:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-13502
Job Location: Fort Walton Beach, FL
Per Diem: Split
Overtime: possible
Duration: 6 mos
Start Date: 8/25/17
Input Date: 08/01/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation.Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-179
Job Location: Savannah, GA
Rate: $58.00 - $63.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
- CATIA V5 and SmarTeam experience required - Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc) – Client Aircraft experience preferred Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-755-100245
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/24/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract-Manufacturing Engineer II

Description:
Unique Skills:
Planning experience with SAP and Solumina preferred. Electrical experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 109742
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Must have secret clearance

Work with designers to ensure the design meets all requirements, including Safety of Flight.

Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required.
 
Job Number: 40415
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Design Engineers

Description:
CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

Design Quality Engineer 2/3-Secret Clearance

Description:
PDS Tech is seeking a candidate for the Design Quality Engineer 2/3-Secret Clearance position located in Melbourne, FL.  
Position Summary / Responsibilities
 
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product.
Collaborates with engineering and manufacturing functions to ensure quality standards are in place.
Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications.
Audits quality systems for deficiency identification and correction.
Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality.
May be certified in lean and six-sigma quality engineering methodologies.

(3 Positions) - Design Quality 



  • Design Quality Engineers will complement the current Design Assurance staff to provide more surge capability to stakeholder reviews of PDPs as the design process ramps up. 
  • Level 2: 2 Years with Bachelors in Science; 0 Years with Masters
  • Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
  • Current DoD Secret Clearance

 
Job Number: 1710066863
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021kwUAAQ&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter

Description:
Seeking a Drafter in Batesville, IN.

JOB SUMMARY:
The Sr. CAD Product Tech/Designer is an office based role, responsible for designing and coordinating per Liko product specifications, for acute care and post-acute care customers, as well as support for Home Care and Direct-to-Consumer (DTC) projects. The role also provides an intermediate level of technical expertise on Liko product configurations and installation techniques. Assists with facilitating Liko product installation training classes, as needed.
The role directly reports to the Manager, Liko Project Management. The ideal candidate will have prior CAD/Revit training and applied experience, and construction industry experience. The position requires 0- 5% travel depending on needs of business or specific project(s) requirements.
Responsibilities:
Responsible for designing LIKO overhead patient lift systems based upon customer requirements to aid in the preparation of pricing proposals, customer presentations, submittal data/drawings, order entry, product installation, and as-built drawings. Using departmental tools, create accurate design drawings and parts lists of lift equipment based on developed design solutions.
Provide an intermediate level of technical expertise on products and installation to Project Managers, Mobility Specialists, Distributors, DTC/Dealers, Contractors and Installers - including assistance with determining solutions that best fit customer needs.
Must be flexible in job related assignments and work overtime to meet project deadlines.
Update and maintain CAD/Revit library of LIKO parts and product information.
Work with systems support personnel to improve departmental tools and interfaces.
Assists with facilitating Liko product installation training classes, as needed. Travel O - 5% depending on needs of the project or business.
As a part of all job duties, employees are entrusted with a permanent mission of research and invention.
QUALIFICATIONS AND SKILLS:
Experienced AutoCAD skills
Advanced Microsoft office skills, (word, excel) o Excellent written and verbal communication skills.
Strong organization skills, with ability to work on multiple projects simultaneously.
Proven ability to interpret architectural, electrical, mechanical plans, specifications, and structural details.
Must have knowledge of other technical / non-technical disciplines which normally requires interface during the execution of the specific technical activities.
Must have a strong sense of urgency when responding to customer needs and requests
Ability to read and interpret technical documents and specifications, including construction and structural documents Experienced in Computer assisted drafting (AutoCAD, Solid Edge, etc...) 3D Design and/or Revit experience preferred
A professional, positive and enthusiastic attitude.
To perform this job successfully an individual must be able to perform each 'Essential Duty' satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION AND EXPERIENCE:
Must have Associates Degree, Technical School Degree, or minimum 2 years' equivalent experience. o Construction industry or technical field experience desired.
Acute care, post-acute care, health care environment experience desired. o Applied knowledge of design tools/software (AutoCAD, Revit) desired.
Work Schedule:
Must be available to work any shift.
 
Job Number: 164561
Job Location: Batesville, IN
Rate: $26.47
Duration: 2-4 Months
Input Date: 08/07/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter 4 / Catia V5 V6 Teamcenter CA

Description:
160178/1609
Drafter 4 (Job Number: 17018411)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 2, 2017

Title: Drafter 4

Rate: $30 - $40/hour

Location: San Diego, CA

Positions: 2 Total

Duration: 6 Months

Shift: 1st Shift - 9/80

Position Summary / Responsibilities
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


Basic Qualifications:

•Experience with Drawing Releases
•Experience with Product Lifecycle Management
•TeamCenter
•AA or other 2 year technical degree in related discipline and 6 years related experience.

Preferred Qualifications:

•CATIA V5/6
•Experience with NG Products (Triton)
•Experience with Commercial Electronics
•19 in. standard rack mounting and computer specification experience
 
Job Number: MB-17018411
Job Location: San Diego, CA
Rate: 30-40 DOE
Duration: 6 month contract
Input Date: 09/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS System Engineer - 1 yr.+ Contractor

Description:
Keltia Design, Inc. is a technical support services company in the Seattle area supplying recruitment and training to customers in the Aerospace industry on a contractual and permanent basis.

I am recruiting for a ECS System Design Engineer 1+ yr. Contract
ECS System Design Engineer 1+ yr. Contractor

Must have 5+ years of experience on Boeing or preferably Airbus Mechanical Systems
Knowledge of oxygen/ECS /fire protection and safety systems, wire harness, and cable assembly required. Also experience with CATIA V5 and AutoCAD are required.

The successful candidate will create and check detail, assembly and installation designs/drawings, engineering orders and substantiation documents.


Correspondence by e-mail is best as it is difficult to respond to all phone calls.

If interested, please include your desired rate and availability on your response.

Thank you
 
Job Number: Kel08217
Job Location: ORE
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 yr+
Start Date: ASAP
Input Date: 08/12/2017
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 2

Description:
EE Technical Designer 2 :: W2 Contract
 
Location: Fort Walton Beach, FL

 
Description:
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision.
 
Skill Code:
623-Electrical Wire Design
 
Education / Experience:         
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Skills: 
Category                     Name                           Required         Level
Technical Skills            CATIA V5                   No                    Intermediate


Contact Details:
Ravi Kumar
Sr. Technical Recruiter
Phone: (804) 915-6529
Email: ravi@iconma.com
 
Job Number: 17-13503
Job Location: Fort Walton Beach, FL
Input Date: 08/09/2017
Firm Name: ICONMA LLC
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Electric System Component Outfitting Interface Engineer

Description:
This position is located in Nagoya, Japan.

Electric system component outfitting interface engineer
  • Mechanical/ structural interface engineering expertise
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044922
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical PM&P Engineer 4

Description:
** Secret Clearance Required to Start **

Electrical Parts Materials & Processes (PM&P) Engineer

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.
- Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.
- It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 372767
Job Location: Huntsville, AL
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/20/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Tech Design

Description:
EE Technical Designer 2
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision.

Technical Skills CATIA V5

Education:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Travel may be required to support wiring installation on aircraft during mod in Mesa, AZ.

Must be US Person for purposes of Export Compliance.
 
Job Number: 39041
Job Location: Fort Walton Beach, FL
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designer

Description:
EE Technical Designer 2 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Fort Walton Beach, FL

The Big Picture – Top Skills You Should Possess:

Experience supporting aviation commercial airline customers
Strong organizational skills
Excellent Excel skills
What you’ll be doing:

Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards.


Technical/Functional skills:

Supports engineering system design and functionality validation activities.
Supports the development and maintenance of moderately-complex product installation designs and part designs.
Supports coordination with internal partners and external suppliers. Works under general supervision.
You will be responsible for:

Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs.
Major functions: Qualifications/Requirements:

AA Degree
What You Need to Bring to the Table:

Excellent written and verbal communication skills
Strong customer service skills
Must be detail-oriented, accurate and well organized.
BONUS POINTS!

This is a contract position with a possibility to go direct based on business needs
What’s In It For You?

An excellent long-term Contract opportunity with the exciting aviation industry.


Get Hired, Apply Now!

Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS 94242
Job Location: Fort Walton Beach, FL
Rate: 45/hr
Per Diem: NO
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 08/01/2017
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/275-1218
800 Phone: 800/298-0666
Website: jobs.yoh.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical. FLT CNTRL/SIM. LABS

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 16-604-1396
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-725-102177
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electro Mechanical

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.

SUMMARY:

Perform hand assembly operations which may include one or more of the following: component identification, soldering, testing and packaging using small tools and equipment in a teamwork environment.  Produce with minimum supervision according to kanban and sales order reports and managing required material.
 
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:
  • Assemble in compliance with IPC standards
  • Operate test and assembly equipment
  • Operating small tools/equipment
  • Navigate within Oracle's manufacturing reports
  • Component identification
  • 5S and housekeeping
  • Ensure all safety standards are adhered to
  • Find, report and correct EH&S discrepancies on a routine basis
  • Recommend improvements to material, process flow and information flow
  • Material/inventory management - ensure kanban levels are sufficient to maintain production requirements
  • Train new associates in standard manufacturing practices
  • Overtime will be required as the needs of the business dictate
  • Understand ever changing MFG requirements and the means of achieving those metrics
  • Understand internal and external customer requirements.
  • Promotes and supports company policies, lean culture and teamwork environment

Other duties may be assigned as required to meet business needs
 
QUALIFICATIONS:
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Strong communications skills
  • Ability to support / lead within a team environment
  • Basic computer skills
  • Familiarity with Microsoft Office
  •  
  •  
  • May be required to properly lift up to 30 pounds maximum.  If an employee needs to lift over 30 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.
  • Experienced user of Microsoft Office Applications (Word, Excel, PowerPoint)
  • Good verbal and written communication skills
  • Must be able to read and interpret BOM’s

 
 
DESIRED CHARACTERISTICS
The following skills may be required depending on the MFG Assembly Operations work location within the plant.

  • Soldering, desoldering and repair of visual errors

 
 
 
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED).
Prefer work experience in electronics or circuit board assembly.
Experience may be obtained through on-site placement by temporary agency.
WorkKeys preferred.

 

 
Job Number: 1710064336
Job Location: Lincolnton, NC
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAjAAO&URLSource=cjhunter

Electro-Mechanical Assembler

Description:

Job Description
Perform hand and/ or machine assembly which may include one or more of the following:
  • Operating automated machinery
  • Presses
  • Component identification
  • Soldering
  • Testing and Packaging using small tools and equipment in a teamwork environment
     

Essential Duties and Responsibilities include the following. Other duties may be assigned.

  • Assemble in compliance with IPC standards including basic soldering (through hole, point to point) .
  • Internal / external customer satisfaction .
  • Operate test equipment and analyze test data .
  • Component identification .
  • Operating small tools/equipment .
  • Verify correct documentation (process sheets, drawings, etc.) .
  • 5S
  • Safety and housekeeping.
  • Overtime as required .
  • Training as required for the position and
  • Assist with the training of new associates in standard manufacturing practices.

 
Qualifications
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Strong communications skills .
  • Reading comprehension .
  • Basic math and computer skills .
  • Manual dexterity .
  • Ability to support / lead within a team environment .
  • May be required to properly lift up to 35 pounds maximum.
  • If an employee needs to lift over 35 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.

 
Desired Characteristics The following skills may be required depending on the MFG Assembly Operations work location within the plant.
 
  • Soldering
  • Desoldering and
  • Repair of visual errors

 
Education and/or Experience

  • High School Diploma or
  • General Education Degree (GED).

 
 
First and Second Shifts available
 

 
Job Number: 1710067030
Job Location: Lincolnton, NC
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mFuAAI&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065208
Job Location: Houston, TX
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Engineer - Level 3

Description:
Location: Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST have an Active Secret Clearance or have had one within the last 2 years**
**MUST be a U.S. Citizen**

Description
Our client is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support.
Activity will require:
- Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system.
- Research, development and design of components, equipment and networks for military applications.
- The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices.
- The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.
- Clearance status required on resume.

Skill/Experience/Education
Mandatory: (All mandatory experience must be shown on resume)
Requires 5 or more years of electro-mechanical design experience with:
- Airborne avionics, missile and/or ground-based equipment.
- Design experience should include electrical cable and/or network design and general electro-mechanical design.
- Candidate must have experience with cabling / harness design.
- The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers.
- The ability to work with minimal oversight.

Desired:
- Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.
 
Job Number: 7660
Job Location: Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 with active secret TX

Description:
159948
Requirement# MFC-REQ-1432
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A Priority
Needed Date 08/22/2016
End Date 07/05/2018
Number of Resources 1
Security Clearance Secret

Type of Service: Engineering
Title: ElectroMechanical Engr - Level 3

Description
Lockheed Martin is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements. Clearance status required on resume.
Skill/Experience/Education
Mandatory:

- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.
Desired:

Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Electronic Package Design Modeling and Drafting 4-5 Years Yes
Harness Design Pro/Cable (Creo) 4-5 Years Yes



Interview Required Yes
Max Pay Rate 65.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1432
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237QZAAY&URLSource=cjhunter

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
 
Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1510015749
Job Location: Redmond, WA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

Electronic Installer 1

Description:
PDS Tech, Inc is seeking a candidate for the Electronic Installer 1 position located in St. Rose, LA. 
  • Assists with routine equipment installation, trial runs and service activity runs to ensure that it meets specifications.
  • Provides assistance with training customers to maintain and adjust routine equipment.
  • Performs routine maintenance on tools, test equipment, etc. and completes required service or systems paperwork.
  • Assists with responding to routine service or systems calls. 
  • Performs or assists with installation and checkout of electric and electronic components for systems and service installed jobs and service agreements associated with automatic building controls systems, fire management, security CCTV, audio and energy management systems. 
  • Installs or assists with the installation of conduit, wire, cable, equipment, components and devices associated with fire, security, and energy management systems.
  • Installs and mounts electric / electronic controls, devices, panels, sensors and components.
  • Performs interlock wiring, wiring check out and assists with system start up. 
  • Coordinates with or advises supervision about requirements for material and supplies to ensure timely delivery to job site. 

Knowledge, Skills, and abilities:
High School diploma or GED.
Associates degree or other technical training and mechanical aptitude preferred.
Good verbal and written communication skills.
Must be physically able to climb, work in high and or confined spaces.
Must not be color blind.
QualificationRating
Must Have
Education
HS *Yes
Industrial
LIFT-MODRT *
     

  and 0 Yrs.
Industry
I-INSTRMNT
     

  and 2 Yrs.
Nice to Have
Industrial
ELECT-TRAD
     

  and 2 Yrs.
Industry
I-HVAC
     

  and 2 Yrs.

 
Job Number: 1710071867
Job Location: Saint Rose, LA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239EmAAI&URLSource=cjhunter

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159151/1366
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: JE-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Emergency Electric Power Generation Integration Engineer

Description:
This position is located in Nagoya, Japan.

Emergency electric power generation integration engineer
  • RAT hardware interface with aircraft expertise
  • Mechanical/ structural interface engineering expertise
  • Hydraulic system knowledge
  • Capability to review stress analysis by supplier/ partner
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044923
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FoAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
DESCRIPTION
Degreed engineer with 10 years’ experience designing mechanism in UG.

DURATION
4 months
 
Job Number: 17-767
Job Location: Northcentral
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 4 months
Start Date: ASAP
Input Date: 08/24/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer I / entry level / EMI CA URGENT

Description:
159926/4410
Engineer I / entry level CA URGENT
Irvine CA
24-42/hr DOE

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions for technical project assignments using fundamental principles of mechanical, electrical, packaging, or other engineering disciplines.


Please send resumes in below category with 0-3 years of experience, preferable 0-1 year of experience

.Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. Professional entry level position. May have limited prior industry experience or have worked with direction in student internship programs. 2. Fundamental knowledge of engineering domain principles, concepts, and techniques. 3. General knowledge of industry products, customers, and related legal/regulatory requirements. 4. Fundamental knowledge of and use of basic engineering design and analysis tools (e.g. computer-aided design programs). Learns and utilizes specialized engineering databases; may require programming skills. 5. Develops familiarity with products and customer specifications and standards applicable to assigned product line or system. 6. Ability to communicate status of technical tasks and actions taken with clarity and precision. 7. Ability to work with general direction and instruction regarding the scope of assignments; determines the priority and order of assignments; and applies judgment in selecting procedures and techniques. 8. Ability to read, analyze, and interpret technical journals and reports. Ability to present findings and information in both formal meetings and informally within and across Parker teams.


1. Aerospace engineering
2. Testing domain
3. Mechanical/Electrical/Aerospace/Computer engineering.
4. EMI/Qualification testing

Must be open to 2nd & 3rd shifts.
 
Job Number: JK-4410
Job Location: Irvine, CA
Rate: 24-42/hr DOE
Duration: 12 month contract
Start Date: Must be open to 2nd & 3rd shifts.
Input Date: 09/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II / entry level / Hydraulic / Control Systems / Technical Writing CA URGENT

Description:
159850/4405
Engineer II
Irvine CA
30-50/hr DOE
2-4 year experience


Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.

3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.

4. General knowledge of other related engineering and technical areas.

5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

· Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

* Special Requirements:

the emphasis should be on (in order of priority):
- BS Mechanical Engineering (or Aerospace or similar)
- Hydraulic experience
- Control systems experience
- Test experience
- Technical Writing (procedures / reports)

2-4 years exp.
 
Job Number: JK-4405
Job Location: Irvine, CA
Rate: 30-50/hr DOE
Duration: 6 month contract
Input Date: 09/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Mechanical - 4- SCI/SSBI Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Engineer Mechanical - 4- SCI/SSBI Clearance position located in Redondo Beach, CA.
 

Candidate will be responsible for performing thermal analysis on space-based hardware using industry standard thermal analysis software/tools. Must possess an understanding of the basic principles of radiation and conduction heat transfer in conjunction with environmental heating effects and parameters associated with spaceflight applications. Responsibilities



include development of active and passive thermal designs using numerical solutions and hand calculations, preparation of technical documents and PowerPoint presentations, establishing test parameters for thermal testing, test monitoring and correlation of test results to model predictions. Demonstrate the skill and ability to perform professional tasks. Ability to collaborate in and lead in team environment. Ability to prioritize and adjust tasks to accomplish the project result.



Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously. Ability to comprehend and analyze complex problems and develop solutions.




 


Qualifications
 

Basic Qualifications:



9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.



along with experience using thermal analytical tools and testing procedures.



Requires in-scope SCI/SSBI clearance.




Preferred Qualifications:



 MS or PhD in Mechanical or Aerospace Engineering with design, analysis and integration experience of spacecraft thermal systems.



Experience using thermal analysis tools (SINDA/G, SINDA/FLUENT, TSS, Thermal Desktop, Flotherm) and aerospace standard design tools (NX, CATIA).




 
Job Number: 1710069953
Job Location: Redondo Beach, CA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CogoAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineering Design 1/2 (3) - FL - C

Description:
RESPONSIBILTIES:
Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

REQUIRED EXPERIENCE:
Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
Preferred Qualifications:
Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

EDUCATION:
Bachelors in Science Mechanical Engineering, or Master's degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

HOURS:
9/80 workweek

 
Job Number: 162898
Job Location: Melbourne, FL
Rate: $28 to $40.00 DOE
Duration: 9-12 months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 2 with Active Secret / Catia FL

Description:
160024
Requirement #MFC-REQ-1450
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 09/11/2017
End Date 09/07/2018
Number of Resources 3
Security Clearance Active Secret

Title: Engineering Design Checker - Level 2

Description
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Verify tolerance analysis on system components has been performed. Work with designers to ensure the design meets all requirements, including Safety of Flight.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years’ experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required. Knowledge of LMC drawing release procedures is desired. Previous LMC experience is a plus.



Max Pay Rate 65.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1450
Job Location: Orlando, FL
Rate: 65/hr max
Duration: 12 month contract
Input Date: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7753
Job Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7752
Job Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-014
Job Location: Greensboro, NC
Rate: $62-$72/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads and Dynamics Engineer

Description:
External Loads and Dynamics Engineer
Full Time position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
General Summary: 
 
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
 
Duties and Responsibilities:
Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
Knowledge of mass properties principles as they relate to loads analysis required.
Knowledge and experience with cable-driven / mass-balanced flight control systems required
Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
 
 
 
 
 
 
 
 
Job Details
City
Greensboro
State
North Carolina
 
Job Location: Greensboro, NC
Rate: "open"
Duration: Full Time
Start Date: asap
Input Date: 08/18/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FP Completions- Mechanical Design Engineer

Description:
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 109081
Job Location: Savannah, GA
Rate: 58-63
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 08/02/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Gerry Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of limited complexity following established drawings and requirements. High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience
 
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Phase-Mechanical/Interiors Design Engineer

Description:
Final Phase-Mechanical/Interiors Design Engineer
Savannah, GA
Rate: $58-$63
Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -

Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


4X10
 
Job Number: 7675
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

Description:
1286
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
Orlando FL
Active secret required
75/hr max
12 month contract

Description
Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s. Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods. Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism. Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus. Requires good verbal and written communication skills, and ability to work in a team environment. Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

Skill/Experience/Education

Mandatory:

Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

Desired:

Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
PRO E and/or CATIA skills
 
Job Number: JE-1286
Job Location: Orlando, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Flight Controls Systems Engineer

Description:
General Summary:
 
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems.  The candidate will be responsible for conceptual definition, detailed design and 2D drafting of new and modified design.
 
Duties and Responsibilities: 
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies for Flight Control Systems to identify optimal engineering solution
  • Define primary and secondary Flight Control System schematics and architecture
  • Develop component level requirements derived from top level system requirements
  • Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
  • Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
  • Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Review work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Have the ability to understand and apply certification requirements
  • Have the ability to generate Flight Controls certification documents in support of design and qualification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers; will deliver technical presentations effectively to a diverse and demanding audience
  • Investigate and disposition production line build issues and be familiar with Material Review Board processes

Qualifications
 
Education, Work Experience, Certification and/or Licensure: 



  • BS in Mechanical Engineering with 10-15 years directly related experience

    • OR MS / MBA with 8-13 years of experience
    • OR 18-23 years directly related experience

  • Some Travel will be required

Knowledge, Skills and Abilities: 

  • Proficient in use of CATIA Version 5
  • Proficient in use of Kinematic function within CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25


Functional knowledge of SAP


 
Job Number: 1710069639
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnEkAAK&URLSource=cjhunter

Flight Readiness Technician-SECRET

Description:
PDS Tech is seeking a Flight Readiness Technician for an open position in Palmdale, CA.

In your role, you will:

  • Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight.
  • Perform operational checkout of aircraft prior to and during preflight.
  • Inspect explosive and armament installations.
  • Maintain aircraft historical records.
  • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
  • Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems.
  • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
  • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting,adjustment and repair of any electrical or electronic system.
  • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
  • Perform operational checkout of hydraulic systems and mechanical systems.
  • Diagnose and correct hydraulic and mechanical malfunctions.
  • Operate engines during run-ups and troubleshoot when needed.
  • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines.
  • Install or replace reservoirs, etc. and repair leaks in same.
  • Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators.
  • Splice, route, clamp, solder, and string tie wires or wire bundles.
  • Repair, install and hook up bomb, missile and rocket racks and pylons.
  • Install and load ejection seats and guns.
  • Install adjust, repair and replace structural parts and assemblies.
  • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures.
  • Modify aircraft components or aircraft support equipment.
  • Perform composite repairs
  • Must have Secret Clearance with the ability to obtain a Top Secret.

As our ideal candidate, you will meet the following requirements:
  • Specialized vocational training, or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience.
  • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
  • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
  • Knowledgeable and able to use computer systems for office and shop applications.
  • Knowledgeable about and able to work in FOD controlled environments.
  • Knowledgeable and able to apply shop math.
  • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
  • Able to complete and maintain all required training and certifications needed to do your job efficiently.
  • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
  • Must have Secret Clearance with the ability to obtain a Top Secret.

 
Job Number: 1610061554
Job Location: Palmdale, CA
Per Diem: No
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G32jAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences (Aircraft Performance)

Description:
Our client is a flight test, engineering and certification organization that provides services to aircraft modifiers and OEM’s is seeking Flight Sciences Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking contract or full-time engineers to join the teams in Seattle and Moses Lake with at least five years' experience in flight sciences, including Aircraft Performance.

Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 08/21/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Location: Savannah, GA
Pay Rate: $56/hr - $67/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
-Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
-Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6952
Job Location: Savannah, CA
Rate: 56-67
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instumentation Engineer

Description:
Flight test instrumentation design in electrical and/or mechanical
Catia V5 experience preferred
BS Engineering preferred
Signal conditioning
Data Acquisition
Duties:
Support the airborne data acquisition system
Design flight test instrumentation installations
Create flight test instrumentation wire diagrams
 
Job Number: FTIE-001
Job Location: Moses Lake, WA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/01/2017
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Unique Skills:
Extensive Flight Test mechanical design experience required. Extensive knowledge and experience in CATIA V5

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-172
Job Location: Savannah, GA
Rate: $56-$67
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/28/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Flight Test Technician 3- Secret

Description:
PDS Tech, Inc. is seeking a Flight Test Technician 3 in Patuxent River, MD.  

The successful candidate will perform a variety of aircraft maintenance.  The maintenance includes but is not limited to avionics, electrical, instrumentation, engine, hydraulic,  airframes, and other mechanical systems and subsystems.  Maintenance actions will include troubleshooting and diagnosing malfunctions, disassembly, wiring repair, wire harness manufacture and routing, engine repair and upkeep, composite repair, hydraulic systems rework, braking systems rework, repair, replacement, re-assembly or adjustment of various Air Vehicle systems in accordance with technical specifications, engineering instructions, service instructions, and processes and procedures.  Modification work will include installation, upgrades to, and the removal of components.   Additionally, the candidate will be expected to complete all required documentation such as records and maintenance work documentation and 4790.2 maintenance work documentation.
 
Performs developmental, experimental and production aircraft maintenance, repair, modification, installation, and testing tasks in a field of specialization; electrical / electronic, mechanical or instrumentation. Instructs, coordinates and performs the duties / functions of Flight Test personnel in area(s) of assignment. Determines the sequence for installing, removing, maintaining, repairing or fabricating critical aircraft components, or electrical / electronic, mechanical or instrumentation systems. Performs testing, rework and repair in various fields of specialization. Applies shop theory and skills in accomplishing assigned tasks working from incomplete engineering, electronic data, blueprints, sketches, engineering drawings, technical orders and written and verbal instructions. Works from blueprints, engineering orders, schematics, repair manuals and other technical documents on aircraft electrical / electronic, mechanical, plumbing, and hydraulics, power plant, structures or instrumentation systems. Performs drilling, reaming, fitting, assembly, trimming, riveting, splicing, insulating and other associated duties as assigned. Performs electrical, mechanical or instrumentation maintenance, repair and testing in support of specific flight test projects. Constructs, troubleshoots, calibrates, adjusts, tests, and maintains various types of complex aircraft equipment, components, devices or systems. Performs modifications and adjustments as necessary. Notifies lead personnel or supervision of any / all malfunctions, defects and damages of equipment, material and product. Checks work for completeness and accuracy. Performs Production Accountability duties associated with the processing, verficiation, quality auditing and inspection of assemblies, parts and tooling for which the individual has been delegated production accountability. May be required to work in other fields incidental to, and in connection with completion of assignment. May be required to perform other related duties as assigned.
 
AA or other 2 year technical degree in related discipline and 3 years of related experience. Or 8yrs of related experience in lieu of degre

 Active DoD Secret Clearance is required 

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 

 
Job Number: 1710071747
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238tfAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GC - HANDLING QUALITIES/CONTROL LAWS - Grade 07

Description:
JOB DESCRIPTION
The job entails Control Law (CLAW) algorithm development, requirements documentation and flow down, test vector development and implementation, handling qualities evaluations of CLAWS, and evaluation of reversionary modes & failures.
Education: BS Aerospace, Electrical or Mechanical Engineering w/5+ years of experience in CLAW Design and Analysis

QUALIFICATIONS
The candidate must have a thorough knowledge of CLAW design, linear and non-linear analysis techniques, time and frequency domain analysis, and an understanding of flight dynamics. Experience and knowledge with Matlab/Simulink is required. Experience with helicopter flight dynamics simulation modelling is a plus. Good familiarity with modern flight control law architectures including Model Following fly-by-wire CLAWs is a must. Candidate should be familiar with DOORs and have experience with System Integration Lab (SIL) formal testing of control laws.

COMMENTS
Strong communication skills and the ability to work in a team environment is required.
U.S. citizenship required.
 
Job Number: 17-760-1457
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Ground Test Engineer

Description:
"PDS Tech is seeking a Materials and Process Engineer for an open position in Stratford, CT

Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure. Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight. Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.  A large portion of the job is oversight of supplier performed component qualification efforts.
Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.



 




Skills Required:
- Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
- Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
 

 
Job Number: 1610052324
Job Location: Stratford, CT
Per Diem: No
Duration: 24 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001skLkAAI&URLSource=cjhunter

HVAC/Mechanical Engineer

Description:

Primary Responsibilities:



Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



Must ensure deliverables meet the scope and client expectations 



Support procurement activities, including coordination with vendors and vendor drawing reviews



Support contractor reviews, and installation planning activities



Individual will travel globally for machine installation, check out and start up



Candidate will plan the work, and track and report work in progress



Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


Qualifications:



 



BS or MS in Mechanical or Chemical Engineering required



7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



Candidate should possess good experience on HVAC systems, utilities and fire systems design



Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



Knowledge of boiler systems is preferred



Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



Candidate must possess good communication skills and be able to successfully interact with clients on global project



Microsoft Office experience is required



AutoCAD and SolidWorks experience is preferred



Domestic and international travel will be required


 
Job Number: 1610057836
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HYDRAULIC/MECH. FLT CONTROLS -

Description:
HYDRAULIC/MECH. FLT CONTROLS

15 MONTHS CONTRACT

STRATFORD, CT

Description:

Provide administrative support to the Hydraulics and Mechanical Controls team on the 53K program.
Responsibilities include developing design change notices, supporting engineer change requests, and tracking engineering design changes through the entire release process.
Responsibilities also include supporting supplier managers and cost account manager utilizing the COMPANY EV system.
 
Job Number: 358686
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Heavy Equipment Mechanic -SECRET

Description:
PDS Tech is seeking a Heavy Equipment Mechanic for an open position in Washington DC



This position installs heating, refrigeration equipment, hot and chilled water systems, and air conditioning equipment, and ensures that specific temperatures are maintained during equipment and systems phase-in operations. Additional responsibilities include: 

• Operates, monitors, tests and documents the performance of assigned equipment, to detect malfunctions or operational problems, and evaluates equipment performance. 

• Maintains, modifies, and overhauls all applicable plant equipment (HVAC equipment). 

• Performs routine preventive maintenance tasks. Assesses preventive maintenance procedures and develops improvements. Assures compliance with all safety requirements and performs safety training. 

• Provides technical direction and training to lower level personnel. 

• Recommends changes to spare parts inventories. 

• Prepares technical data and specifications for building and equipment procurement, installation, operation and maintenance.
 

 
Qualifications 

• High School Diploma or equivalent and 2 years of related experience 


 
 
Job Number: 1710065372
Job Location: WA, DC
Duration: 6 months
Input Date: 01/19/2018
Firm Name: