Job Search Results

893 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 11:45PM Pacific Time by ContractJobHunter. )

Listings 1 - 893

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39771
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Powerplant / APU

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


Varying Responsibilities:
Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
Evaluate certification methods of compliance.
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Participate in ground and flight tests as required.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Occasional international travel may be required.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Relevant work experience related to aircraft design, test, and certification.
Experience related to APU and/or powerplant systems and integration with the aircraft.
Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
Consulting and direct hire opportunities available.
 
Job Number: #205-APU
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Program Manager

Description:
Currently seeking full-time and contract Program Managers to fill openings with an aerospace flight test, engineering and certification organization located in Moses, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs.
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a
The Program Managers responsibility consists of supporting management of programs through the program lifecycle to achieve or surpass the capability, schedule, and financial performance of customer programs. This position acts as primary customer contact for a programs status, deliverables and cross-disciplinary technical leadership, across a multitude of external contacts and internal team members to ensure customer requirements and expectations are met. Program Managers may also be responsible for overseeing the similarity review process to ensure aircraft components meet certification requirements.

Duties & Responsibilities
• Communicate with potential client to determine scope of project for desired services, timeline and cost sensitivity.
• Conduct internal reviews to determine program staffing to ensure technical skills are paired with technical needs at the appropriate time.
• Create business proposals including schedule, deliverables, and cost.
• Provide business proposals to potential clients and negotiate terms.
• Partnering with Contracts, finalize business proposals including ensuring contract conditions minimize company risk.
• Develop control systems that accurately measure progress of schedule, risk, and technical performance and with sufficient time for corrective action should issues arise.
• Manage program budget, identify and mitigate potential over-runs before they are realized.
• Manage relationship with client throughout project
• Review component qualifications through similarity comparison to ensure they meet certification requirements.
Requirements
• Four (4) year degree in Engineering or equivalent Technical Program Management experience
• 5 + years of relevant experience
• Working knowledge of Part 25 Requirements and Aircraft Certification process desired.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
Aircraft Door Design Engineer
Location: Southeast
Duration: Long term contract: 12+ months
Rate: Open, DOE

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential


General Summary:
 
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components.  The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
 
Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA Version 5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
                                                   
                            
Qualifications
 
Education, Work Experience, Certification and/or Licensure: 
 
BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience
Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP
 
 
The Structures Company LLC is an AA/EOE.
 
Job Location: southeast, NC
Rate: "open"
Per Diem: yes
Duration: 12+ month
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Engineer

Description:
Bachelors Degree in Engineering and experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development
Review all openings posted at www.hi-tecsolutions.com/jobs
 
Job Number: 112881
Job Location: Savannah, GA
Rate: 70-77 hourly
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanical Systems Design Engineers

Description:
Aircraft Mechanical Systems Design Engineers Needed.

Mechanical Systems Design/Integration (Catia Routing)

PRIMARY RESPONSIBILITIES INCLUDE:
Execute conceptual and preliminary airplane design in a thorough, imaginative, and practical manner, including:

Sizing and layout of airplane configuration, including aerodynamic, control, structure, propulsion, and supporting systems
Assessment of vehicle performance
Estimation of structural loads using computational and analytic technique
Perform design optimization of the primary system elements within given constraints.
Employ analytical, empirical, computational, and experimental techniques to assess subsonic and transonic aerodynamic characteristics of aircraft
Articulate formal design reviews and present design data to internal and external customers.
Requires a BS in Aerospace Engineering or Related Field with 10+ Years
SKILLS REQUIRED:
Candidates will have strong knowledge and practical experience in aircraft design, basic sizing, configuration layout, trade studies,
Experience in aircraft dynamics, and controls;
Experience in structural layout & design of primary load paths
Experience with civil transport airplane systems
Working knowledge of civil airworthiness requirements for transport category airplanes
Knowledge of FAA Part 25 and EASA CS 25 regulations

Note: Ability to obtain/maintain a security clearance may be required.

The Structures Company LLC is an AA/EOE.
 
Job Location: CO
Rate: Open - DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Quality Control Inspectors - Goodyear, AZ

Description:
STS AeroStaff Services is hiring Aircraft Quality Control Inspectors for open positions in Goodyear, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Inspector completes evaluations of aircraft, engines and components to determine their condition against established standards and performs inspections of work completed by Aircraft Maintenance Technicians (AMT) to verify compliance with approved data. He/She performs work within budgeted time and within client, FAA, and customers’ standards of quality. The Aircraft Inspector is responsible for the effectiveness of client’s inspection function, ensuring compliance with FAA Regulations and Customer requirements, and meeting customer quality expectations.

Job Duties:

• Maintain the daily operation of the Repair Station in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer’s recommendations
• Promote and support all client safety initiatives and programs
• Inspect, evaluate and perform surveillance of work performed by AMT’s
• Inspect aircraft and components by obtaining and interpreting work cards, reviewing inspection requirements’ scope and detail, completing visual inspection of aircraft areas opened by AMT’s including but not limited to fuel tanks, empennage, cargo areas, under floor area, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear
• Ensure that all work is performed using the correct approved data
• Ensure the quality of all completed work meets client and customer expectations
• Perform receiving inspection requirements for new and continued-service parts for serviceability, including but not limited to verifying certification from manufacture or overhaul facility and inspecting for shipping damage
• Conduct weight and balance analysis by using approved maintenance manuals and scales
• Perform NDT inspections if and as authorized on the client’s Management, Supervisory and Inspection Roster
• Ensure completion of logbook entries and “Return to Service” for work completed by the Repair Station
• Ensure proper completion of all client and customer work documents used by the Repair Station
• Comply with all client and customer training requirements
• Promote and assist with On The Job training for newly hired inspection personnel
• Provide technical guidance and assistance to maintenance personnel
• Exposure to the hangar areas while performing inspections
• Exposure to outdoor areas during hot and cold temperature extremes while performing inspections

Qualifications:

• 3+ years’ experience performing as an accomplished aircraft inspector on transport category aircraft
• Capable of interpreting drawings and blueprints to accomplish a specific task
• Must have exceptional written and oral communication skills and be able to interact with a wide variety of people
• Some computer skills (knowledge of MS Office programs such as Word, Excel) are preferred
• High School Diploma or Equivalent required
• Must possess a current Mechanics certificate with Airframe & Power plant ratings

Physical Requirements:

• Near-vision acuity – natural or corrected near-vision acuity in at least one eye, corrected or uncorrected, but be such that the applicant can read a Snellan equivalent of 20/25 (Jaeger number 2) letters at not less than 12 inches [30.5cm] on a standard Jaeger test chart
• This test will be administered annually
• Distance-vision acuity – natural or corrected distance-vision acuity in at least one eye, either corrected or uncorrected, must be better than Snellan equivalent 20/30 (Jaeger number 4 letters at not less than 18.0 inches [45.7cm] on a standard Jaeger test chart) This test will be administered manually
• Color contrast differentiation – capable of distinguishing and differentiating contrast among colors or shades of gray used in the method as determined by the employer
• This test will be conducted upon initial certification and at three year intervals thereafter
• Must be able to lift 50 lbs.
• Must be able to wear and breathe through a full-face respirator
• May be exposed to hazardous chemicals that require the use of safety equipment
• Must be able to bend, stoop, kneel, stand for prolonged periods of time, and climb ladders, stands, and operate man-lifts
• Must be comfortable with heights and confined spaces
• Normal or Corrected Hearing
• Visual acuity must be a minimum of 20/40 corrected
• Must be able to access all areas of the aircrafts

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39640
Job Location: Goodyear, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CATIA Designer

Description:
Technical Designer 2

Location: Fort Walton Beach, FL
Duration: 6 months

Description:

Wiring Installation Design
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision. CATIA V5

Education / Experience:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-13502
Job Location: Fort Walton Beach, FL
Per Diem: Split
Overtime: possible
Duration: 6 mos
Start Date: 8/25/17
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
- CATIA V5 and SmarTeam experience required - Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc) – Client Aircraft experience preferred Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-755-100245
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract-Manufacturing Engineer II

Description:
Unique Skills:
Planning experience with SAP and Solumina preferred. Electrical experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 109742
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Must have secret clearance

Work with designers to ensure the design meets all requirements, including Safety of Flight.

Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required.
 
Job Number: 40415
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter

Description:
Seeking a Drafter in Batesville, IN.

JOB SUMMARY:
The Sr. CAD Product Tech/Designer is an office based role, responsible for designing and coordinating per Liko product specifications, for acute care and post-acute care customers, as well as support for Home Care and Direct-to-Consumer (DTC) projects. The role also provides an intermediate level of technical expertise on Liko product configurations and installation techniques. Assists with facilitating Liko product installation training classes, as needed.
The role directly reports to the Manager, Liko Project Management. The ideal candidate will have prior CAD/Revit training and applied experience, and construction industry experience. The position requires 0- 5% travel depending on needs of business or specific project(s) requirements.
Responsibilities:
Responsible for designing LIKO overhead patient lift systems based upon customer requirements to aid in the preparation of pricing proposals, customer presentations, submittal data/drawings, order entry, product installation, and as-built drawings. Using departmental tools, create accurate design drawings and parts lists of lift equipment based on developed design solutions.
Provide an intermediate level of technical expertise on products and installation to Project Managers, Mobility Specialists, Distributors, DTC/Dealers, Contractors and Installers - including assistance with determining solutions that best fit customer needs.
Must be flexible in job related assignments and work overtime to meet project deadlines.
Update and maintain CAD/Revit library of LIKO parts and product information.
Work with systems support personnel to improve departmental tools and interfaces.
Assists with facilitating Liko product installation training classes, as needed. Travel O - 5% depending on needs of the project or business.
As a part of all job duties, employees are entrusted with a permanent mission of research and invention.
QUALIFICATIONS AND SKILLS:
Experienced AutoCAD skills
Advanced Microsoft office skills, (word, excel) o Excellent written and verbal communication skills.
Strong organization skills, with ability to work on multiple projects simultaneously.
Proven ability to interpret architectural, electrical, mechanical plans, specifications, and structural details.
Must have knowledge of other technical / non-technical disciplines which normally requires interface during the execution of the specific technical activities.
Must have a strong sense of urgency when responding to customer needs and requests
Ability to read and interpret technical documents and specifications, including construction and structural documents Experienced in Computer assisted drafting (AutoCAD, Solid Edge, etc...) 3D Design and/or Revit experience preferred
A professional, positive and enthusiastic attitude.
To perform this job successfully an individual must be able to perform each 'Essential Duty' satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION AND EXPERIENCE:
Must have Associates Degree, Technical School Degree, or minimum 2 years' equivalent experience. o Construction industry or technical field experience desired.
Acute care, post-acute care, health care environment experience desired. o Applied knowledge of design tools/software (AutoCAD, Revit) desired.
Work Schedule:
Must be available to work any shift.
 
Job Number: 164561
Job Location: Batesville, IN
Rate: $26.47
Duration: 2-4 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter 4 / Catia V5 V6 Teamcenter CA

Description:
160178/1609
Drafter 4 (Job Number: 17018411)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 2, 2017

Title: Drafter 4

Rate: $30 - $40/hour

Location: San Diego, CA

Positions: 2 Total

Duration: 6 Months

Shift: 1st Shift - 9/80

Position Summary / Responsibilities
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


Basic Qualifications:

•Experience with Drawing Releases
•Experience with Product Lifecycle Management
•TeamCenter
•AA or other 2 year technical degree in related discipline and 6 years related experience.

Preferred Qualifications:

•CATIA V5/6
•Experience with NG Products (Triton)
•Experience with Commercial Electronics
•19 in. standard rack mounting and computer specification experience
 
Job Number: MB-17018411
Job Location: San Diego, CA
Rate: 30-40 DOE
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS System Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, WA is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We are working with our client in the Pacific NW area that is has a potential 6 mo+ contract for an Aircraft ECS System Design Engineer

Must have 5+ years of experience on Boeing and/or Airbus Mechanical Systems
Knowledge of oxygen and ECS systems required. Experience with fire protection and/or safety systems helpful. Also experience with CATIA V5 required.

The successful candidate will create and check detail, assembly and installation designs/drawings, engineering orders and substantiation documents.

If interested, please include your desired rate and availability on your response along with your most recent resume in a WORD.doc format

Thank you
 
Job Number: KEL7618
Job Location: Pacific NW
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/16/2022
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 2

Description:
EE Technical Designer 2 :: W2 Contract
 
Location: Fort Walton Beach, FL

 
Description:
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision.
 
Skill Code:
623-Electrical Wire Design
 
Education / Experience:         
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Skills: 
Category                     Name                           Required         Level
Technical Skills            CATIA V5                   No                    Intermediate


Contact Details:
Ravi Kumar
Sr. Technical Recruiter
Phone: (804) 915-6529
Email: ravi@iconma.com
 
Job Number: 17-13503
Job Location: Fort Walton Beach, FL
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Tech Design

Description:
EE Technical Designer 2
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision.

Technical Skills CATIA V5

Education:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Travel may be required to support wiring installation on aircraft during mod in Mesa, AZ.

Must be US Person for purposes of Export Compliance.
 
Job Number: 39041
Job Location: Fort Walton Beach, FL
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designer

Description:
EE Technical Designer 2 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Fort Walton Beach, FL

The Big Picture – Top Skills You Should Possess:

Experience supporting aviation commercial airline customers
Strong organizational skills
Excellent Excel skills
What you’ll be doing:

Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards.


Technical/Functional skills:

Supports engineering system design and functionality validation activities.
Supports the development and maintenance of moderately-complex product installation designs and part designs.
Supports coordination with internal partners and external suppliers. Works under general supervision.
You will be responsible for:

Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs.
Major functions: Qualifications/Requirements:

AA Degree
What You Need to Bring to the Table:

Excellent written and verbal communication skills
Strong customer service skills
Must be detail-oriented, accurate and well organized.
BONUS POINTS!

This is a contract position with a possibility to go direct based on business needs
What’s In It For You?

An excellent long-term Contract opportunity with the exciting aviation industry.


Get Hired, Apply Now!

Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS 94242
Job Location: Fort Walton Beach, FL
Rate: 45/hr
Per Diem: NO
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical. FLT CNTRL/SIM. LABS

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 16-604-1396
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Mechanical Integration

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 19-836
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Engineer - Level 3

Description:
Location: Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST have an Active Secret Clearance or have had one within the last 2 years**
**MUST be a U.S. Citizen**

Description
Our client is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support.
Activity will require:
- Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system.
- Research, development and design of components, equipment and networks for military applications.
- The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices.
- The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.
- Clearance status required on resume.

Skill/Experience/Education
Mandatory: (All mandatory experience must be shown on resume)
Requires 5 or more years of electro-mechanical design experience with:
- Airborne avionics, missile and/or ground-based equipment.
- Design experience should include electrical cable and/or network design and general electro-mechanical design.
- Candidate must have experience with cabling / harness design.
- The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers.
- The ability to work with minimal oversight.

Desired:
- Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.
 
Job Number: 7660
Job Location: Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 with active secret TX

Description:
159948
Requirement# MFC-REQ-1432
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A Priority
Needed Date 08/22/2016
End Date 07/05/2018
Number of Resources 1
Security Clearance Secret

Type of Service: Engineering
Title: ElectroMechanical Engr - Level 3

Description
Lockheed Martin is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements. Clearance status required on resume.
Skill/Experience/Education
Mandatory:

- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.
Desired:

Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Electronic Package Design Modeling and Drafting 4-5 Years Yes
Harness Design Pro/Cable (Creo) 4-5 Years Yes



Interview Required Yes
Max Pay Rate 65.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1432
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159151/1366
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: JE-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
DESCRIPTION
Degreed engineer with 10 years’ experience designing mechanism in UG.

DURATION
4 months
 
Job Number: 17-767
Job Location: Northcentral
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 4 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer I / entry level / EMI CA URGENT

Description:
159926/4410
Engineer I / entry level CA URGENT
Irvine CA
24-42/hr DOE

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions for technical project assignments using fundamental principles of mechanical, electrical, packaging, or other engineering disciplines.


Please send resumes in below category with 0-3 years of experience, preferable 0-1 year of experience

.Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. Professional entry level position. May have limited prior industry experience or have worked with direction in student internship programs. 2. Fundamental knowledge of engineering domain principles, concepts, and techniques. 3. General knowledge of industry products, customers, and related legal/regulatory requirements. 4. Fundamental knowledge of and use of basic engineering design and analysis tools (e.g. computer-aided design programs). Learns and utilizes specialized engineering databases; may require programming skills. 5. Develops familiarity with products and customer specifications and standards applicable to assigned product line or system. 6. Ability to communicate status of technical tasks and actions taken with clarity and precision. 7. Ability to work with general direction and instruction regarding the scope of assignments; determines the priority and order of assignments; and applies judgment in selecting procedures and techniques. 8. Ability to read, analyze, and interpret technical journals and reports. Ability to present findings and information in both formal meetings and informally within and across Parker teams.


1. Aerospace engineering
2. Testing domain
3. Mechanical/Electrical/Aerospace/Computer engineering.
4. EMI/Qualification testing

Must be open to 2nd & 3rd shifts.
 
Job Number: JK-4410
Job Location: Irvine, CA
Rate: 24-42/hr DOE
Duration: 12 month contract
Start Date: Must be open to 2nd & 3rd shifts.
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II / entry level / Hydraulic / Control Systems / Technical Writing CA URGENT

Description:
159850/4405
Engineer II
Irvine CA
30-50/hr DOE
2-4 year experience


Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.

3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.

4. General knowledge of other related engineering and technical areas.

5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

· Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

* Special Requirements:

the emphasis should be on (in order of priority):
- BS Mechanical Engineering (or Aerospace or similar)
- Hydraulic experience
- Control systems experience
- Test experience
- Technical Writing (procedures / reports)

2-4 years exp.
 
Job Number: JK-4405
Job Location: Irvine, CA
Rate: 30-50/hr DOE
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 2 with Active Secret / Catia FL

Description:
160024
Requirement #MFC-REQ-1450
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 09/11/2017
End Date 09/07/2018
Number of Resources 3
Security Clearance Active Secret

Title: Engineering Design Checker - Level 2

Description
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Verify tolerance analysis on system components has been performed. Work with designers to ensure the design meets all requirements, including Safety of Flight.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years’ experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required. Knowledge of LMC drawing release procedures is desired. Previous LMC experience is a plus.



Max Pay Rate 65.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1450
Job Location: Orlando, FL
Rate: 65/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7753
Job Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7752
Job Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads and Dynamics Engineer

Description:
External Loads and Dynamics Engineer
Full Time position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
General Summary: 
 
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
 
Duties and Responsibilities:
Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
Knowledge of mass properties principles as they relate to loads analysis required.
Knowledge and experience with cable-driven / mass-balanced flight control systems required
Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
 
 
 
 
 
 
 
 
Job Details
City
Greensboro
State
North Carolina
 
Job Location: Greensboro, NC
Rate: "open"
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FP Completions- Mechanical Design Engineer

Description:
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 109081
Job Location: Savannah, GA
Rate: 58-63
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Gerry Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of limited complexity following established drawings and requirements. High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience
 
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Phase-Mechanical/Interiors Design Engineer

Description:
Final Phase-Mechanical/Interiors Design Engineer
Savannah, GA
Rate: $58-$63
Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -

Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


4X10
 
Job Number: 7675
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

Description:
1286
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
Orlando FL
Active secret required
75/hr max
12 month contract

Description
Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s. Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods. Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism. Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus. Requires good verbal and written communication skills, and ability to work in a team environment. Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

Skill/Experience/Education

Mandatory:

Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

Desired:

Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
PRO E and/or CATIA skills
 
Job Number: JE-1286
Job Location: Orlando, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences (Aircraft Performance)

Description:
Our client is a flight test, engineering and certification organization that provides services to aircraft modifiers and OEM’s is seeking Flight Sciences Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking contract or full-time engineers to join the teams in Seattle and Moses Lake with at least five years' experience in flight sciences, including Aircraft Performance.

Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Location: Savannah, GA
Pay Rate: $56/hr - $67/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
-Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
-Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6952
Job Location: Savannah, CA
Rate: 56-67
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instumentation Engineer

Description:
Flight test instrumentation design in electrical and/or mechanical
Catia V5 experience preferred
BS Engineering preferred
Signal conditioning
Data Acquisition
Duties:
Support the airborne data acquisition system
Design flight test instrumentation installations
Create flight test instrumentation wire diagrams
 
Job Number: FTIE-001
Job Location: Moses Lake, WA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Unique Skills:
Extensive Flight Test mechanical design experience required. Extensive knowledge and experience in CATIA V5

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-172
Job Location: Savannah, GA
Rate: $56-$67
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GC - HANDLING QUALITIES/CONTROL LAWS - Grade 07

Description:
JOB DESCRIPTION
The job entails Control Law (CLAW) algorithm development, requirements documentation and flow down, test vector development and implementation, handling qualities evaluations of CLAWS, and evaluation of reversionary modes & failures.
Education: BS Aerospace, Electrical or Mechanical Engineering w/5+ years of experience in CLAW Design and Analysis

QUALIFICATIONS
The candidate must have a thorough knowledge of CLAW design, linear and non-linear analysis techniques, time and frequency domain analysis, and an understanding of flight dynamics. Experience and knowledge with Matlab/Simulink is required. Experience with helicopter flight dynamics simulation modelling is a plus. Good familiarity with modern flight control law architectures including Model Following fly-by-wire CLAWs is a must. Candidate should be familiar with DOORs and have experience with System Integration Lab (SIL) formal testing of control laws.

COMMENTS
Strong communication skills and the ability to work in a team environment is required.
U.S. citizenship required.
 
Job Number: 17-760-1457
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HYDRAULIC/MECH. FLT CONTROLS -

Description:
HYDRAULIC/MECH. FLT CONTROLS

15 MONTHS CONTRACT

STRATFORD, CT

Description:

Provide administrative support to the Hydraulics and Mechanical Controls team on the 53K program.
Responsibilities include developing design change notices, supporting engineer change requests, and tracking engineering design changes through the entire release process.
Responsibilities also include supporting supplier managers and cost account manager utilizing the COMPANY EV system.
 
Job Number: 358686
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear Engineer

Description:
Hydraulics and Landing Gear Engineer
Location: Mojave, CA
Duration: 12+ months contract
Rate: Up to 65/hr
Overtime potential
Per diem if you qualify
Holiday pay, annual bonus pay, sick pay, 401k
Company is seeking an experienced Hydraulic Engineer with experience in Aircraft Mechanical Systems and Aircraft landing gear design background. The primary task of this role engineering role will be to develop and refine system level requirements and engineering design for all hydraulic systems and landing gear, including components and rolling stock
Key Components
Perform CATIA modeling and model validation
Perform component testing and writing flight testing plans
Evaluate the aircraft hydraulic system's functionality, failures and system design
Evaluate the current aircraft's landing gear design for suitability to the mission with new designs
Conduct reliability analysis on hydraulic aircraft systems and components
Evaluate data from the initial program build for verification and validation purposes and identify further testing or development work
Work closely with the pilots of the vehicles to ensure the hydraulic and landing gear meet the customer requirements
Review update and compile engineering definition of related aircraft mechanical system components and assemblies based on records from the initial build project
Ability to review hydraulic and landing gear schematics and designs quickly to solve problems or to find opportunities to improve systems design
Have a keen understanding of hydraulic system components and landing gear kinematics
Ability to assess the needs of the task and carry out the necessary course of action with minimal supervision. He/she must possess the technical background, organizational and interpersonal skills to work with other groups, suppliers and customers
Develop standardized design criteria and templates using model based definition practices
Establish Product Lifecycle Management architecture using PLM and ERP software
Support review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confer with management, systems safety, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Key Requirements
Professional Requirements
Proven experience in aircraft hydraulic systems/landing gear design operation and troubleshooting
5-7 years engineering experience in similar role
Background which includes system certification with the Federal Aviation Administration (FAA), as well as other certification authorities
Experience with computer modeling of landing gear systems and components including model validation
Experience with simulation software such as Simulink or Flowmaster
Experience in progressing hydraulic systems from design to implementation in a very short period of time
Experience in aircraft mechanical system design, assembly and test processes
CAD experience
Excellent Organizational Skills and problem-solving skills
Excellent computer skills, Microsoft Word, Excel and Powerpoint
Knowledge of FAA part 25/23 FARs and other aircraft standards a plus. Experience with manufacturing- based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Bachelor’s degree in Mechanical Engineering or equivalent experience
The Structures Company is an AA/EOE.

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to 65/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Injection Molding Process Engineer

Description:
Injection Molding Process Engineer
Location: Highland Park, MI

Description:
Drives activities of technical team to achieve continuous improvement of injection molding processes. Works with production management production, quality control, and maintenance reports and statistics to plan and modify process activities to support customer requirements. Implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials. Responsible for participating in the development of new injection molding tools and processes that are received by the plant. Receives hand-off from the launch TE and transfers teams and owns production processes.

- Responsible for injection molding related continuous improvement (e.g. cycle times, scrap, quality, material cost reduction, regrind implementation, etc.)
- Develops plans for injection molding process improvement and will have specific areas of accountability in its execution
- Provides support on new product launch tooling, providing the manufacturing input for development of new process and improvements to existing processes and tooling.
- Takes hand-off of tools/processes from launch team and ensure smooth execution in operations..
- Follows established action plans for processes out of range
- Specifies project requirements and buy off of new equipment
- Work with Tooling Manager for all tool repairs and maintenance
- Maintains documentation closely following necessary timeliness on specific projects
- Enforce safety rules daily. Noncompliance of safety rules requires support with HR on disciplinary action and/or termination.
- Conduct daily observations of PPE use and safe work practices adherence and coach employees as needed.
- Ability to complete employee development plans, organize, communicate, and motivate employees. Must be able to prioritize own work -day schedule
- Completes daily audit on his process department to insure process compliance.
- This job description in no way states or implies that these are the only duties to be performed by this employee. The employee is expected to perform other duties necessary for the effective operation of the department and/or facility.

Qualifications
Education / Experience
- Bachelor's Degree in Plastics Processing or Mechanical Engineering
- Five years or more experience in injection molding processing required.
- Six Sigma Green or Black Belt.
- Superior injection molding processing skills
- Thorough understanding of scientific molding concepts (e.g. RJG Master Molder)
- Aptitude for problem solving and ability to demonstrate
- Experience with various injection molding technologies (e.g. mold behind, two shot, gas assist, insert molding, robot programming, etc.)
 
Job Number: 17-13634
Job Location: Highland Park, MI
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Robin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Lab Technician -

Description:
Instrumentation Lab Technician

Duration: 12 month contract

Location: Stratford, CT



Job Description:

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
Must be able to assist in performing system calibrations and check outs with the Test Engineer. Must be able to support Sensor calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.
Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry , thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
 
Job Number: 357321
Job Location: Stratford, CT
Rate: $45hr
Per Diem: yes
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Level Technical Designer

Description:
Uses manual or Computer Aided Design (CAD) (Catia V5) tools to develop and maintain mechanical/structural engineering product definition. Assists in preparation of basic design layouts. Modifies existing designs. Assists in the coordination and development work transfer packages for relevant parties. Verifies accuracy of non-technical data. Investigates and resolves routine manufacturing process or engineering related issues. Supports the maintenance of new processes and procedures by providing input related to routine aspects of the maintenance process. Works under general supervision.

AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 26027-1
Job Location: FL
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Aviation Engineers Needed in Oregon - Long Term Contracts

Description:
Our client is seeking 3 Leads with recent conversion/remod experience:
Mechanical/Electrical Lead
Design Lead
Stress Lead
Please reflect your lead experience and conversion experience on your resume.
 
Job Location: Portland, ORE
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1+ yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AVIATION CONSULTING EXPERTS INC
Attention: Brook
Address: 1953 GOLDEN HEIGHTS RD STE 1701
City, State: FORT WORTH, TX 76177
Phone: 817/952-9193
Website: www.aviationaces.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer IV - (AL) - ACTIVE SECRET CLEARANCE

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.

Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.

It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

We also have full Medical/Dental, Life, Vision, and 401k.
 
Job Number: MP&Pal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience
 
Job Location: Savannah, GA
Rate: Negotiable
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Location: Syracuse, NY
Rate: $35.00 - $45.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**MUST be a U.S. Citizen**


Description
- Provides Manufacturing Engineering support for ASW/EW and/or Ground-based Radar programs.
- Provides assembly/inspection process guidance in addition to timely problem resolution through root cause and corrective action techniques.
- Creates assembly planning based on drawings and solid models, participates in engineering technical reviews, develops methods for transitioning from development to production, identifies opportunities for process improvement, and interfaces with Tech Ops/Design Engineering organization to implement DFA concepts.
- Develops tooling and fixturing to improve workflow and reduce injuries.
- Supports Quality improvements and determines root cause/corrective actions in order to improve defect/rework/scrap/yield metrics.
- Supports product sell-off, including interfacing with DCMA and/or customer as appropriate.
- Actively participates in initiatives to improve IME (overhead) rate. Identifies, manages, and implements capital projects in support of assigned programs.
- May be required to develop cost estimates in support of proposals, and target times in support of production control.

Skill/Experience/Education
Mandatory:
- Ability to read and interpret drawings, parts lists, and military specifications.
- Experience with mechanical/electrical assembly.
- Ability to create manufacturing planning/processes from generalized assembly drawings.
- Demonstrated capability to multitask in support of multiple concurrent programs and initiatives.
- This requires US citizenship.

Desired:
- Previous experience with acoustic sensor systems, cable and/or cabinet assembly / manufacture.
- Lean or Six Sigma black belt or equivalent.
- Change management experience, including initiating documentation changes and interpreting change management as it applies to work in process.
- Solder training/certification to IPC-A-610, J-STD-001, or equivalent.
- 3D solid modeling (ProE or SolidWorks) and/or AutoCad competency.
- Ability to create and work to detailed, task-oriented schedules.
- Working knowledge of SAP.
- Exposure to additive manufacturing or 3D printing technologies.
- Familiarity with electrical, fiber optic, RF test equipment and protocols.
- Solid trouble-shooting methodology to reduce downtime.
 
Job Number: 7716
Job Location: Syracuse, NY
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Eng Contract Lead

Description:
UNIQUE SKILLS
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - Closets - Crew rest areas - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-775-112881
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Eng Contract Lead

Description:
Unique Skills:

Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - Closets - Crew rest areas - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

deal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development
 
Job Number: 112881
Job Location: savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Engineering Contract Lead

Description:
Mechanical Aircraft Interiors Engineering Contract Lead

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7735
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Bachelor of Science degree required
As a Senior Mechanical Engineer, the qualified candidate will be a motivated self-starter who can work with other engineers to resolve technical problems, establish approaches for solutions, and complete mechanical scope of work. In this position, the candidate will be responsible for developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of various types of infrared focal plane assemblies with considerations in thermal and structural performance in vacuum and cryogenic environments. Familiarity with CREO/Pro Engineer or a similar CAD tool and a good grasp of drawing standards is strongly recommended. The candidate will also be responsible for meeting cost, schedule, quality, and performance requirements for the finished product. The candidate will work with minimal direction or supervision while exercising considerable latitude in determining the technical objectives of the assignment. The position will require frequent interaction with senior external personnel on significant technical matters often requiring coordination between organizations.

Basic Qualifications:
A minimum of 5 years of experience in mechanical design and/or production engineering support for military and aerospace applications.
Understanding of manufacturing methods and processes such as assembly standards, fabrication processes, assembly documentation, and mechanical fasteners.
Minimum of 5 years of literacy and experience with Pro Engineer or similar CAD tool
Must have a working knowledge of Microsoft Office products (Word, Excel, Powerpoint)
Ability to read detailed engineering drawings, specifications and an understanding of Geometric, Dimensional & Tolerance

Required Experience, Knowledge, Skills and Abilities:
Bachelor's Degree in Engineering, Mechanical preferred.
Possess strong written and oral communication skills
Experience with support roles with design and mechanical applications in Integrated Product Teams that include other engineering disciplines such as Electrical, Systems, and Manufacturing Engineering
Experience in mechanical sub-systems packaging, materials, thermal and structural analysis
Specific experience in space flight hardware and/or military product applications and environments

Desired Qualifications:
Knowledge in the design of products and tooling used in applications requiring high reliability and extended life
Direct experience in developing detailed mechanical designs and documentation packages for optical, electrical and/or mechanical systems.
Knowledge in the design of infrared products
Experienced in design of products for cryogenic environments.
Experience with a gate release process for product development.
 
Job Number: 39075
Job Location: Goleta, CA
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
We are currently looking a Mechanical Design Engineer with experience working on flight controls and mechanisms.
Mechanical designer to produce pilot control assembly and detail drawings. The candidate will perform a wide variety of highly complex mechanical design tasks which requires knowledge of electromechanical equipment / systems.
Tasks require knowledge of materials, fabrication processes, GD&T and Solidworks. Our company is currently working on advanced flight controls and military vehicles.

CAD system is Solidworks
 
Job Location: Sylmar, CA
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2 with active secret KY

Description:
159894
Requirement #SOF-REQ-0247
Work Location
Lexington, KY
Work Week 5/40
Priority
Needed Date 08/07/2017
End Date 05/07/2018
Number of Resources 4
Security Clearance Active Secret


Title: Mechanical Design Engineer - Level 2
Description
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and sub-assemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.
Skill/Experience/Education
Mandatory:

• Familiarity with ANSI/ASME Y14.100 or similar design and drafting standards • Experience with Catia V5 or similar 3D parametric modeling and drafting • Perform detailed drawing checks and be responsible for completion of production ready drawings • Ability to work under little or no direct supervision • Demonstrated previous success working in a team based environment to meet objectives • Active DoD secret clearance
Desired:

• Any familiarity with C-130 aircraft, specifically C-130J • Air Force or DoD experience • Experience or familiarity with engineering change documentation • Experience with Teamcenter PLM software

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 or similar program 0-3 Years Yes
Drafting 0-3 Years Yes
Structural component and assembly design 0-3 Years Yes



Min Pay Rate 30.00 USD
Max Pay Rate 50.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-0247
Job Location: Lexington, KY
Rate: 30-50/hr max
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
seeking 4 MP&P Engineers for openings in Huntsville, AL.

RESPONSIBILITIES:
Coordinates definition of complex requirements for materials, parts and processes used in the manufacture of products in support of rotorcraft programs. This is a floor support position, working with the represented work force in Ridley Park, PA. Establishes standards for specifications and other documents to manage the deployment of materials, parts and processes. Represents the Company on technical committees to develop and revise industry standards. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Works under consultative direction. Interim Clearance needed to start.

ADDITIONAL EXPERIENCE:
This position will be responsible for reviewing electromechanical, electromagnetic and electrical (EEE) parts against the Parts, Materials and Processes (PMP) program requirements for applicability in the Redesigned Kill Vehicle. Reviews will include assessment of the part for the design, reviewing test data including but not limited to DPA, PIND, etc.. and reviewing failure analysis data if applicable. Additionally, supplier compliance assessments will be performed on mission critical suppliers.

EDUCATION:
Bachelor's degree and typically 14 or more years' experience in an engineering classification or equivalent years of experience in an engineering classification, a Master's degree with typically 12 or more years' experience in an engineering classification or a PhD degree with typically 9 or more years' experience in an engineering classification.

FULL TIME/1ST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 164508
Job Location: Huntsville, AL
Rate: $82.35
Duration: 3 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSUs, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
-Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
 
Job Number: 7648
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer - Tech Spec II

Savannah, GA
Rate: $60-$63
Long Term contract

Unique Skills:

Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Gulfstream Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7058
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 3 month contract
Shift: 3rd Shift

**MUST have an Active Secret Clearance or to have had one within the last 2 years**

Job Description:
- Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
- Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
- Mechanical and or Electrical Engineer. C-Shift.
- On aircraft and off-aircraft operational requirements.
- Schedule In this role, The employee will review designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Aircraft Experience
- Experience with Lean Six Sigma practices
- SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7667
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 3

Description:
Location: Fort Walton Beach, FL
Rate: $35.00 - $45.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST have an Active Secret Clearance or to have had one within the last 2 years**

Job Description:
- The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design.
- The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems.
- The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
- The individual will be expected to work cross functionally within the Engineering organization as well as across the company.

Ongoing job responsibilities include:
• Designs components and assemblies using commodities including sheet metal & machined components
• Provides technical experience for design and manufacturing related matters
• Mechanical design and associated program deliverables on subassemblies or small self-contained systems
• Design and release drawings to meet internal and external commitments.
• Updates on project progress and roadblocks.
• Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
• Demonstrate manufacturing feasibility and technical justification for selected design approach
• Support product lifecycle management ushering a product from concept through production implementation.

Skill/Experience/Education
Mandatory:
- 4+ years of experience with CATIA V5 and MS Office Suite.

Desired:
- Team Center Engineering experience
- C130 Familiarity
- Job Scope /IT reports experience
 
Job Number: 7666
Job Location: Fort Walton Beach, FL
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 3 with active secret / Catia V5 FL

Description:
Requirement# SOF-REQ-0251
Work Location FORT WALTON BCH, FL
Work Week 5/40
Priority High
Needed Date 08/21/2017
End Date 08/21/2018
Number of Resources 1 Security Clearance Secret



Type of Service: Engineering
Title: Mechanical Engineer - Level 3
Description
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design. The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. The individual will be expected to work cross functionally within the Engineering organization as well as across the company.

Ongoing job responsibilities include:
• Designs components and assemblies using commodities including sheet metal & machined components
• Provides technical experience for design and manufacturing related matters
• Mechanical design and associated program deliverables on subassemblies or small self-contained systems
• Design and release drawings to meet internal and external commitments.
• Updates on project progress and roadblocks.
• Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
• Demonstrate manufacturing feasibility and technical justification for selected design approach
• Support product lifecycle management ushering a product from concept through production implementation.

Skill/Experience/Education
Mandatory:

CATIA V5
MS Office Suite expertise

Desired:

TeamCenter Engineering experience
C130 Familiarity
JobScope /IT reports experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia CAD Software 4-5 Years Yes
MS Office Suite Software 4-5 Years Yes


Interview Required Yes
Min Pay Rate 35.00 USD
Max Pay Rate 45.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-0251
Job Location: Fort Walton Beach, FL
Rate: 35-45/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Space Hardware/ Infrared

Description:
Title: Sr Mechanical Engineer
Location: Goleta, CA
Duration: 6+ months contract

Job Description:
Senior Mechanical Engineer, the qualified candidate will be a motivated self-starter who can work with other engineers to resolve technical problems, establish approaches for solutions, and complete mechanical scope of work.
In this position, the candidate will be responsible for developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of various types of infrared focal plane assemblies with considerations in thermal and structural performance in vacuum and cryogenic environments.
Familiarity with CREO/Pro Engineer or a similar CAD tool and a good grasp of drawing standards is strongly recommended.
The candidate will also be responsible for meeting cost, schedule, quality, and performance requirements for the finished product.
The candidate will work with minimal direction or supervision while exercising considerable latitude in determining the technical objectives of the assignment.
The position will require frequent interaction with senior external personnel on significant technical matters often requiring coordination between organizations.

Basic Qualifications:
A minimum of 5 years of experience in mechanical design and/or production engineering support for military and aerospace applications.
Understanding of manufacturing methods and processes such as assembly standards, fabrication processes, assembly documentation, and mechanical fasteners.
Minimum of 5 years of literacy and experience with Pro Engineer or similar CAD tool Must have a working knowledge of Microsoft Office products (Word, Excel, Powerpoint)
Ability to read detailed engineering drawings, specifications and an understanding of Geometric, Dimensional & Tolerance

Required Experience, Knowledge, Skills and Abilities:
Bachelor's Degree in Engineering, Mechanical preferred.
Possess strong written and oral communication skills
Experience with support roles with design and mechanical applications in Integrated Product Teams that include other engineering disciplines such as Electrical, Systems, and Manufacturing Engineering Experience in mechanical sub-systems packaging, materials, thermal and structural analysis
Specific experience in space flight hardware and/or military product applications and environments

Desired Qualifications:
Knowledge in the design of products and tooling used in applications requiring high reliability and extended life
Direct experience in developing detailed mechanical designs and documentation packages for optical, electrical and/or mechanical systems.
Knowledge in the design of infrared products
Experienced in design of products for cryogenic environments.
Experience with a gate release process for product development.
Advanced degree in Engineering, Mathematics, Science or related professional experience

Security Clearance: Ability to obtain a security clearance preferred
Contractor Work Week 5/40
Degree Required? Yes
 
Job Number: WT373907
Job Location: Goleta, CA
Rate: $65.00
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Wendy Toll
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer II with Ability to obtain security clearance / CREO / Electro-optical sensors CA

Description:
7047859
Mechanical Engineer II
El Segundo, CA
50-60/hr
6 months

The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills: • CAD software, especially Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 6 years of professional experience Desired Skills: • CAD software, especially Creo and Windchill • Hands on experience in Electro-optical sensors • Microsoft Project • Prior experience in DoD or Aerospace • Already possess a security clearance Required Education: • A Bachelor's degree in Mechanical Engineering or related Engineering field • Prefer to also have a Master's Degree • Minimum 6 years related experience
 
Job Number: MB-7047859
Job Location: El Segundo, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
Mechanical System Design Engineer (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Fort Walton Beach, FL

The Big Picture – Top Skills You Should Possess:

Experience supporting aviation commercial airline customers
Strong organizational skills
Excellent Excel skills
What you’ll be doing:

Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design.
Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups.


Technical/Functional skills:

Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
You will be responsible for:

Supports system components'' designs/proposals standards to provide installation and detail documentation.
Trains others.
Major functions: Qualifications/Requirements:

Bachelor’s Degree
What You Need to Bring to the Table:

Excellent written and verbal communication skills
Strong customer service skills
Must be detail-oriented, accurate and well organized.
BONUS POINTS!

This is a contract position with a possibility to go direct based on business needs
What’s In It For You?

An excellent long-term Contract opportunity with the exciting aviation industry.


Get Hired, Apply Now!

Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS 94248
Job Location: Fort Walton Beach, FL
Rate: 60-65/hr
Per Diem: NO
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following preferred skills:
Category Name Required Level
Technical Skills CATIA V5 No Intermediate

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. May require travel to Mesa, AZ to support aircraft survey and/or support shipside installation. Must be US Person for purposes of Export Compliance.
 
Job Number: 39043
Job Location: FL
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and interpret engineering documents and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support.
• Systems design and/or qualification experience is a plus.
• A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Auxiliary Mechanisms, Hydraulics, Crew and Equipment, Doors, Flight Deck and Furnishings, Fuel, and secondary structures.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-170
Job Location: Savannah, GA
Rate: $59 - $62/hour
Per Diem: YES
Overtime: YES
Duration: 1 plus years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician

Description:
From the Hiring Manager:

* 5+ years’ experience in a manufacturing environment; government / military / defense background with vehicle mechanic and/or R&D experience preferred.
* Looking for a highly motivated individual able to get a task and complete it to the finish.
* Should have Research and Development (R&D) and fabrication experience.
* Fabrication = taking measurements & laying-out hole patterns & then drill or cut.
* Must have Mechanical experience with:
> Various types of drilling (through-hole, match, countersink, counter bore & step drilling)
> Schematic / Blueprint reading and comprehension (Mechanical)
> Measuring tools (Calipers, Tape Measure, Feeler gauge, etc.)
> Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
* Mathematical conversions (Decimal to Fraction)
* Working understanding of engines and vehicle mechanics

Job Description:

> Assemble mechanical parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, travelers, etc.) into sub-units or complete units.
> Complete small wiring terminations as needed during mechanical assembly
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Works closely with engineering on new prototype projects
> Fabricates brackets, jigs, fixtures, and misc. metal work in support of projects
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality & engineering standards
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Preferred Certifications:

* ASE (Automotive Service Excellence)
* HVAC
* Working understanding of hydraulic pumps and cylinders


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 034_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes/Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Aircraft Cabin Interior & Systems Engineering Contractor

Description:
Mechanical/Aircraft Cabin Interior & Systems Engineering Contractor
Savannah, GA
Rate: $58-$63

Unique Skills:

Ideal Candidates will have mechanical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7429
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Aircraft Cabin Interior and Systems Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-726-102175
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer I

Description:
NC Engineer I
Savannah, GA
Rate: $50

Unique Skills:

Experience of operating CNC machinery.


Education and Experience Requirements:

Bachelors degree in Mechanical Engineering or a related curriculum; or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. One (1) year machining experience.

Position Purpose:

Under moderate supervision, perform duties related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principal Duties and Responsibilities:

Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operators set-up sheets for numerical control machines. 6. Produce Catia 2-D tool drawings as required.

Additional Functions: 1. Perform other duties as required.

Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must have basic knowledge of Catia.
 
Job Number: 7516
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD – Automotive Designer with Kinematics Focus

Description:
Job Title: NX CAD – Automotive Designer with Kinematics Focus
Location: Portland, OR 97217
Duration: 1 – 2 Years
Job Details
• This position is working with the engineering group that is responsible for certain mechanism components that are installed and packaged into the vehicle such as; Wiper Motors, Steering Columns, Accelerator and Brake Pedals. You’ll be responsible to package these OEM components and parts. You’ll design and concept the support brackets that are mainly made of sheet metal and plastics.
• Your main focus is packaging, design and developing of the mounting brackets. Verify component motion of the mechanisms has the adequate clearances needed by using NX Kinematics application. You’ll also be working with several OEM vendors to figure out which models or features work best for the application.

Skills and Knowledge:
• Creating Kinematics Models using NX Siemens CAD System
• Familiarity with 3D Geometry and Coordinate Transformation.
• NX Sheetmetal and Solid Modeling

Education Requirements
• BS Degree preferred but not required.
 
Job Number: 3343
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1-2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical Designer / Engineer - Heavy Truck

Description:
Design and develop vehicle components and systems using Siemens NX CAD..
Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
Create and maintain detailed part and assembly drawings.
Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
Apply Client nd industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS:

Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
Siemens NX CAD experience preferred.
CHS Capital Harness experience preferred.
Previous electrical and electronics packaging experience preferred.
A general knowledge of automotive systems preferred.
Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312PS
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control (N/C) Programmer - Level 2

Description:
Numerical Control (N/C) Programmer - Level 2

Location: Owego, NY
Pay Rate: DOE
Duration: 8 month contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Description
-Self-motivated individual looking for a challenging career within the Company RMS machining center in Owego NY.
-Individual should be capable of generating, compiling, and debugging CNC programs for both vertical and horizontal machines.
-Individual will develop flow charts and diagrams outlining process steps in operation;
develops and revises program code;
prepares documentation of program development, modifications and operating instructions;
conducts program tests and makes modifications to code as needed;
and may be required to analyze system capabilities to resolve input/output problems.
-Candidate will be expected to be able to work well in group settings including design, engineering, and manufacturing personnel.

Skill/Experience/Education (Mandatory):
The following items MUST be clearly demonstrated on the resume:
• Prior CNC programming experience in MasterCAM
• Understanding of GD&T
• Ability to translate requirements from prints and drawings into work instructions and work processed
• Previous Manufacturing support roles mechanical and assembly level builds.
 
Job Number: 7720
Job Location: Owego, NY
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control (N/C) Programmer - Level 2 / no clearance NY

Description:
160069
Requirement #MST-REQ-1509
Work Location OWEGO, NY
Work Week 9/80-A
Priority High
Needed Date 08/21/2017
End Date 04/15/2018
Number of Resources 1
Security Clearance No clearance



Title: Numerical Control (N/C) Programmer - Level 2

Description
Self-motivated individual looking for a challenging career within the Lockheed Martin RMS machining center in Owego NY. Individual should be capable of generating, compiling, and debugging CNC programs for both vertical and horizontal machines. Individual will develop flow charts and diagrams outlining process steps in operation; develops and revises program code; prepares documentation of program development, modifications and operating instructions; conducts program tests and makes modifications to code as needed; and may be required to analyze system capabilities to resolve input/output problems. Candidate will be expected to be able to work well in group settings including design, engineering, and manufacturing personnel.
Skill/Experience/Education
Mandatory:

The following items MUST be clearly demonstrated on the resume or it will be rejected: • Prior CNC programming experience in MasterCAM • Understanding of GD&T • Ability to translate requirements from prints and drawings into work instructions and work processed • Previous Manufacturing support roles mechanical and assembly level builds.



Pay Rate 48.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1509
Job Location: Owego, NY
Rate: 48-50/hr max
Duration: 8 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Oxygen Systems Engineer

Description:
Oxygen Systems Engineer
Full Time position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
 
General Summary: 
 
The Oxygen System Cognizant Engineer is responsible for providing technical expertise in support of the Oxygen System through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:
Oversee and coordinate Oxygen System project activities through all phases of the project including preliminary design, detailed design, development, certification, production and in-service product support
Interface with other company departments, FAA and suppliers to ensure project schedule milestones are met 
Actively support the development of company infrastructure
Maintain consolidated Engineering Parts List (EPL), weight status and cost status for the Oxygen System
Support design, manufacturing (production), in-service and flight test activities
Maintain and present to management integrated project schedule and status for layouts, ICD’s, drawings, development tests, certification tests, flight test plans, ITF tests related to the Oxygen System and plans/status to resolve flight test, manufacturing and in-service issues
Track and report status of action items related to design, development, certification, sustaining, in-service and flight test related to the Oxygen System
Provide support as required in other areas of the Mechanical Systems 2 team that includes bleed air systems, air conditioning, waste system, and ice and rain protection systems
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
5+ years of directly related technical experience in the development and certification of aircraft Oxygen Systems required
 
Knowledge, Skills and Abilities:
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred
Knowledge of FAA processes and procedures related to qualification testing required.
Knowledge of DO-160, DO-178B and DO-254 processes are required
Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Oxygen and ECS regulations required
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata is preferred
Familiarity with ERP Systems such as SAP
Proficiency in Microsoft Office Suites (Word, Excel, Project, Lotus Notes, PowerPoint) is required
Ability to understand, prepare and review FAA certification plans
Ability to prepare detailed functional test procedures
Ability to manage projects end to end including defining project goals, creating project plans, tracking performance, analyzing project schedules, and presenting information to senior management.
Ability to establish and manage project budgets
 
 
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: "open"
Duration: FullTime
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB Design Engineer III / Must have Altium Design experience CA

Description:
159673/7120354
Job Title: PWB Design Engineer III

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





-Must have Altium Design experience specifically with using both schematic capture, and board layout design for power supplies (high voltage and high current).



-Must have good drafting skills per GD&T rules.

The primary duty is to generate PWB on Altium PWB Design Tools for applications our design programs.
This assignment will require an experienced individual that can work closely with electrical/electronics circuit designers and electro-mechanical designers in a team environment.


Skills:
-Must have ALTIUM design experience specifically. Other PWB tools are not applicable.



-Extensive (6+ years) experience in the design, development and generation of PWB drawings.



Must have experience in the developing the assembly drawings atthe Circuit Card Assembly/Printed Wiring Assembly (CCA/PWA) level using either CREO or newly release Drafting Option within Altium.



-GD&T experience is required.



Education:
-BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.

Skills:
Required

PWB CIRCUIT CARD ASSEMBLIES GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

PCB DESIGN

State/Province: California
City/Town: Canoga Park

Start Date: 06/19/2017 Hours Per Week: 40.00
Est. End Date: 11/12/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7120354
Job Location: Canoga Park, CA
Rate: 50/hr max
Duration: 5 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineers - East Aurora, NY

Description:
STS AeroStaff Services is hiring Product Engineers for open positions in East Aurora, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Lead the efforts associated with the creation, release and maintenance of the Material and Process Reports and Material Usage Agreements across more than 5 products
• Coordinate directly with customers on the materials selected and any special requirements associated with the materials
• Lead the Material Process discussions at technical interchange meetings and design reviews
• Coordinate with design engineers in the selection of materials that are appropriate for use in the application and to the greatest extend possible have heritage on other man rated programs

Qualifications:

• BS with 2 years’ related experience or MS with 1 year related experience in one of the following fields: Materials/Metallurgy, Chemical/Chemistry/Electro-Chemical, Welding, Industrial, or Mechanical
• Experience with complex mechanical hardware in an aerospace environment is recommended
• Experience in creating detailed reports and design documentation and presenting these reports to customers

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39642
Job Location: East Aurora, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Professional Engineer

Description:
I&C AP1000, Electrical and Mechanical Engineering - Volatile Electrical Generating Plant - New Construction of Units 3 & 4 - Pressurized Water Reactors - Professional (PE) Engineer – Experienced/ Knowledgeable in CAD systems and drafting capabilities – CIVIL/ MECHANICAL
PE- Required

- PE (Professional) Civil or Structural Engineer
- Experienced in Forming, Shoring, or Scaffolding would be a PLUS
- Nuclear Experience would be a plus
- MUST be familiar with Heavy Industrial construction.

Then they would need to understand the following:
- They will be working out of C cans or portable offices.
- Using the restroom in a porter potty.
- Will need to pass an extensive background check
 
Job Number: 23
Job Location: GA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Input Date: 11/14/2020
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 985/872-5530
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - Valves and Actuators

Description:
Duties:
Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: KD374288
Job Location: Canoga Park, CA
Rate: $62.00
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer (Valves & Actuators) - Level III / IV

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
- This is NOT a Designer role.
- Manager only wants to see local candidates at this time.
- Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
-Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 7754
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer III - IV (Valves & Actuators)

Description:
Job Title: Project Engineer / Component Product Engineer III - IV (Valves & Actuators)


Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **



** Manager only wants to see local candidates at this time **





-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.



Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.



25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.



20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.



10%: Supplier integration with external vendors



10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
-Bachelor's degree in Mechanical or Aerospace Engineering.




Skills:
Required

COMPONENT ENGINEERING
PROJECT ENGINEER
FABRICATION


State/Province: California
City/Town: Canoga Park

Start Date: 08/28/2017
Hours Per Week: 40.00
Est. End Date: 02/25/2018
Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
Days Per Week: 5.00
 
Job Number: MB-7323816
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion System Design Engineer

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

Job Description:
- This engineering function provides engineering design, systems integration, subcontract management, product technical support and anomaly resolution for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics).
- Develops system and component designs and requirements to satisfy overall propulsion systems requirements.
- The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts.
- Must have the capability to perform system integration and perform system level trade studies to optimize designs for manufacturing, producibility and performance.
- Generates engineering drawings as well as assembly and testing requirements.
- Provides direct support to the suppliers, the factory and the launch site to ensure production schedules are met, resolve anomalies and streamline operations to improve efficiency.
- When anomalies occur, provides causal analysis that leads to effective resolution and corrective actions that prevent recurrence.
- Reviews the as-built product (hardware and associated software) and product test data to certify that the final product configuration and performance meets requirements and is ready for test and/or flight. - Develops design improvements that reduce cost and risk and/or improve vehicle performance.


Basic Requirements:
- Requires a bachelor's degree in engineering from an accredited university and 10+ years experience in dynamic testing field
- Familiar with mechanical design utilizing Unigraphics, ProE, or Solidworks
- Familiar with structural, fluids and/or dynamics analysis
- Goal oriented with an acute attention to detail
- A team player with the ability to adapt within a dynamic working environment
- Ability to work extended hours, off shifts and weekends
- Familiar with electro-dynamic shaker systems to include operational and maintenance requirements
- Familiar with impact shock systems to include resonant beam/air cannon
- Able to manage workflow and schedule of testing within the lab


Preferred Qualifications
- Proficient in mechanical design utilizing Unigraphics, ProE, or Solidworks
- Experience in analysis (fluids, structural and dynamics)
- Experience in performing testing to include but not limited to, random vibration, force limited random vibration, sine on random vibration, modal identification, beam impact shock and shaker shock
- Experience in Signal processing, instrumentation, signal conditioning, data acquisition and vibration and shock fixture design
- Proficient in Microsoft Office (Word, Excel, PowerPoint and Project)
 
Job Number: 7707
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Design Engineer

Description:
Propulsion Systems Design Engineer

My client is looking for a Propulsion Systems Design Engineer for rockets. This is a contract position. Location is the Denver Tech Center.

Propulsion Systems Design Engineer

Job Description
This engineering function provides engineering design, systems integration, subcontract management, product technical support and anomaly resolution for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics).
• Develops system and component designs and requirements to satisfy overall propulsion systems requirements.
• The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts.
• Must have the capability to perform system integration and perform system level trade studies to optimize designs for manufacturing, producibility and performance.
• Generates engineering drawings as well as assembly and testing requirements.
• Provides direct support to the suppliers, the factory and the launch site to ensure production schedules are met, resolve anomalies and streamline operations to improve efficiency.
• When anomalies occur, provides causal analysis that leads to effective resolution and corrective actions that prevent recurrence.
• Reviews the as-built product (hardware and associated software) and product test data to certify that the final product configuration and performance meets requirements and is ready for test and/or flight.
• Develops design improvements that reduce cost and risk and/or improve vehicle performance.

Basic Requirements
-Requires a bachelor's degree in engineering from an accredited university and 10+ years experience in dynamic testing field
-Familiar with mechanical design utilizing Unigraphics, ProE, or Solidworks
-Familiar with structural, fluids and/or dynamics analysis
-Goal oriented with an acute attention to detail
-A team player with the ability to adapt within a dynamic working environment
-Ability to work extended hours, off shifts and weekends
-Familiar with electro-dynamic shaker systems to include operational and maintenance requirements
-Familiar with impact shock systems to include resonant beam/air cannon
-Able to manage workflow and schedule of testing within the lab

Preferred Qualifications
-Proficient in mechanical design utilizing Unigraphics, ProE, or Solidworks
-Experience in analysis (fluids, structural and dynamics)
-Experience in performing testing to include but not limited to, random vibration, force limited random vibration, sine on random vibration, modal identification, beam impact shock and shaker shock
-Experience in Signal processing, instrumentation, signal conditioning, data acquisition and vibration and shock fixture design
-Proficient in Microsoft Office (Word, Excel, PowerPoint and Project)


The location is Denver.

The rate is open. The duration is 11+ months.

US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.

If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!

Thank you!
 
Job Number: mm170801cjPropulsion
Job Location: Denver, CO
Rate: Open
Per Diem: Possible
Overtime: Not likely
Duration: 11+ months
Start Date: August, 2017
Input Date: 11/14/2020
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Michael Mendocha
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineers - New Orleans, LA

Description:
STS AeroStaff Services is hiring Quality Engineers for open positions in New Orleans, Louisiana.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Quality Engineer is responsible for assuring that Companies and products will adequately meet the objectives of the contracts or sales agreements by maintaining surveillance over all phases of the product's cycle from design until successful fulfillment of intended objectives.

Job Duties:

• Uses operations research techniques such as cost analysis, experimentation, gaming, simulation, flow charting, information theory, and advanced mathematics in developing optimum quality plans
• Develops overall quality plans using the systems concept identifying in terms of the product involved, general instructions, test and sampling procedures, specific parts and assembly instructions, material disposition, records, tables, charts, and graphs required
• Acts as an advisor in all phases of statistical quality control, develops new statistical techniques and interprets significance of resulting data
• Reviews Engineering and Manufacturing information such as new and revised designs, specifications and bills of materials; production, tool and test equipment drawings; production and tool plans; operation and routing sheets; production, storage, and shipping methods; and facility and floor space requirements
• Acts as an advisor in his field of specialty to vendors or groups
• Develops vendor certification and rating plans
• Evaluates the quality and capability of vendors or potential vendors and approves such vendors
• Plans the minimum quality standards, test, and inspection requirements and process controls
• Performs other job related duties as assigned by management

Qualifications:

• Bachelor's degree in manufacturing or technical field
• Three plus years of related quality experience
• Experience working in quality engineering department preferably in a marine/military/aerospace industry is a plus
• Working familiarity and knowledge of ISO 9001 quality standards and programs
• Familiarity with government contracts desirable
• Familiarity with military standards and specifications and able to read, interpret mechanical and electrical drawings and schematics desirable
• Excellent communication skills both written and oral
• Ability to interact effectively with management, peers and other employees relative to quality and technical issues
• Ability to work independently with minimal oversight
• Attention to details
• Proficient in MS Outlook, Word and Excel
• ASQ member, ASQ/AWS/ASNT certifications desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39476
Job Location: New Orleans, LA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
Position Summary

This position performs inspection activities, to assess conformance of products to the design as defined by the engineering drawings and/or models.

Duties and Responsibilities

Performs inspection activities, to assess conformance of products to the design as defined by the engineering drawings and/or models
Inspects products, components, sub-assemblies, and/or systems to ensure conformance to requirements
Creates organizational value by implementing innovative solutions and best practices involved in all processes of the product realization value stream
Assists Quality Engineers with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly
Assists Quality Engineers prepare inspection plans and checklists for inspection
Assist Quality Engineers with data collection and root cause analysis investigations
Generate discrepancy notices and initiate Material Review Board actions
Perform material movement transactions after completing inspection process
May specialize in receiving inspection, in-process inspection, process verification/auditing, final inspection, etc.
Support, communicate, reinforce and defend the mission, values and culture of the organization
Ability to effectively interpret data and present as information and respond to questions from engineers and other technical staff

Basic Qualifications

US Citizenship required
High School Diploma or GED
In-depth knowledge of relevant manufacturing standards (such as J-Std-001/IPC-A-610/620) or common mechanical techniques (such as geometric dimensioning and tolerance practices)
Ability to use various measurement devices (calipers, pin gauges, go/no-go gauges, etc.) to verify mechanical part compliance
Experience reading mechanical drawings and able to verify parts dimensions against drawing requirements
Experience using a Coordinate Measuring Machine (CMM), Optical comparator or other complex inspection systems is desired
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
 
Job Number: 52041
Job Location: Danbury, CT
Rate: $20/hr
Per Diem: No
Overtime: Yes
Duration: 6 mos
Start Date: 08/07/17
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Eric Ellis
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
Position Summary

This position performs inspection activities, to assess conformance of products to the design as defined by the engineering drawings and/or models.

Duties and Responsibilities

Performs inspection activities, to assess conformance of products to the design as defined by the engineering drawings and/or models
Inspects products, components, sub-assemblies, and/or systems to ensure conformance to requirements
Creates organizational value by implementing innovative solutions and best practices involved in all processes of the product realization value stream
Assists Quality Engineers with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly
Assists Quality Engineers prepare inspection plans and checklists for inspection
Assist Quality Engineers with data collection and root cause analysis investigations
Generate discrepancy notices and initiate Material Review Board actions
Perform material movement transactions after completing inspection process
May specialize in receiving inspection, in-process inspection, process verification/auditing, final inspection, etc.
Support, communicate, reinforce and defend the mission, values and culture of the organization
Ability to effectively interpret data and present as information and respond to questions from engineers and other technical staff

Basic Qualifications

US Citizenship required
High School Diploma or GED
In-depth knowledge of relevant manufacturing standards (such as J-Std-001/IPC-A-610/620) or common mechanical techniques (such as geometric dimensioning and tolerance practices)
Ability to use various measurement devices (calipers, pin gauges, go/no-go gauges, etc.) to verify mechanical part compliance
Experience reading mechanical drawings and able to verify parts dimensions against drawing requirements
Experience using a Coordinate Measuring Machine (CMM), Optical comparator or other complex inspection systems is desired
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
 
Job Number: 52034
Job Location: Bridgeport, CT
Rate: $20/hr
Per Diem: No
Overtime: Yes
Duration: 6 mos
Start Date: 08/07/17
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Eric Ellis
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 1st Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems.

Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:

We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519366NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 2nd Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft inspection experience and preferably have composite experience also.
 
Job Number: FD-519654NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 3rd Shift - NC

Description:
Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices.

Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.

Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend.

They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519656NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RS Airworthiness Inspector

Description:
RS Airworthiness Inspector

Location: Long Beach, CA
Pay Rate: DOE ($32.05/hr - $35.61/hr)
Duration: Long Term Contract
Shift: First

Unique Skills:
-Airframe and Powerplant License required.
-Proficient in utilization of Measuring devices, Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC procedures.

Education and Experience Requirements:
-High School graduate/GED.
-Airframe and Powerplant License required.
-Four (4) years aircraft experience on large/mid-size aircraft.
-Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities/Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills. Must be able to prioritize tasks.
2. Strong computer skills.
3. Must be able to work all shifts.
4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 7539
Job Location: Long Beach, CA
Rate: 32.05 - 35.61
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RS Airworthiness Inspector

Description:
RS Airworthiness Inspector - 2nd Shift

Location: Long Beach, CA
Pay Rate: DOE ($32.05/hr - $35.61/hr)
Duration: Long Term Contract
Shift: Second Shift, 4x10 Schedule

Unique Skills:
Able to work four ten hour days plus overtime as required

Education and Experience Requirements:
-High School graduate/GED.
-Airframe and Powerplant License required.
-Four (4) years aircraft experience on large/mid-size aircraft.
-Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities/Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills. Must be able to prioritize tasks.
2. Strong computer skills.
3. Must be able to work all shifts.
4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 7532
Job Location: Long Beach, CA
Rate: 32.05 - 35.61
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Materials Engineer

Description:
**This position requires an active U.S. Security Clearance to start, for which the U.S. Government requires U.S. Citizenship.**

This position will be responsible for reviewing electro-mechanical, electromagnetic and electrical (EEE) parts against the Parts, Materials and Processes (PMP) program requirements for applicability in the Redesigned Kill Vehicle. Reviews will include assessment of the part for the design, reviewing test data including but not limited to DPA, PIND, etc.. and reviewing failure analysis data if applicable. Additionally, supplier compliance assessments will be performed on mission critical suppliers.

Coordinates definition of complex requirements for materials, parts and processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of materials, parts and processes. Represents the Company on technical committees to develop and revise industry standards. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under consultative direction.

This position requires an active U.S. Security Clearance to start, for which the U.S. Government requires U.S. Citizenship.

Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 39031
Job Location: AL
Rate: open
Per Diem: split
Overtime: possible
Duration: 3 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III / DO-178B ANSI C and Assembly CA

Description:
159927/4114
Engineer III
Irvine CA
48-58/hr DOE
6 month contract

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-4114
Job Location: Irvine, CA
Rate: 48-58/hr DOE
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Duration: 6 month contract

** Candidates must have an Active Secret clearance or have had a Secret clearance in the last two years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have primarily Hardware experience **

- Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
- Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
- Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
- Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
- Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
- Advanced degree desirable.
- Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: 7489
Job Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer

Description:
As a Senior Mechanical Engineer, the qualified candidate will be a motivated self-starter who can work with other engineers to resolve technical problems, establish approaches for solutions, and complete mechanical scope of work. In this position, the candidate will be responsible for developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of various types of infrared focal plane assemblies with considerations in thermal and structural performance in vacuum and cryogenic environments. Familiarity with CREO/Pro Engineer or a similar CAD tool and a good grasp of drawing standards is strongly recommended. The candidate will also be responsible for meeting cost, schedule, quality, and performance requirements for the finished product. The candidate will work with minimal direction or supervision while exercising considerable latitude in determining the technical objectives of the assignment. The position will require frequent interaction with senior external personnel on significant technical matters often requiring coordination between organizations.
Basic Qualifications:
A minimum of 5 years of experience in mechanical design and/or production engineering support for military and aerospace applications.
Understanding of manufacturing methods and processes such as assembly standards, fabrication processes, assembly documentation, and mechanical fasteners.

Minimum of 5 years of literacy and experience with Pro Engineer or similar CAD tool
Must have a working knowledge of Microsoft Office products (Word, Excel, Powerpoint)

Ability to read detailed engineering drawings, specifications and an understanding of Geometric, Dimensional & Tolerance

Required Experience, Knowledge, Skills and Abilities:
Bachelor's Degree in Engineering, Mechanical preferred.
Possess strong written and oral communication skills
Experience with support roles with design and mechanical applications in Integrated Product Teams that include other engineering disciplines such as Electrical, Systems, and Manufacturing Engineering
Experience in mechanical sub-systems packaging, materials, thermal and structural analysis
Specific experience in space flight hardware and/or military product applications and environments
Desired Qualifications:
Knowledge in the design of products and tooling used in applications requiring high reliability and extended life
Direct experience in developing detailed mechanical designs and documentation packages for optical, electrical and/or mechanical systems.
Knowledge in the design of infrared products
Experienced in design of products for cryogenic environments.
Experience with a gate release process for product development.
Advanced degree in Engineering, Mathematics, Science or related professional experience
 
Job Number: 7192786
Rate: OPEN
Duration: 6-12 Months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionic-Mechanical Design Engineer

Description:
TOOLS
Inventor (3D Modeling)

INTAKE NOTES
Looking for Avio Mechanical Design Engineer with heavy mechanical experience and some electrical exposure. Familiar with 3D modeling using Inventor or Solidworks, Catia is ok (not preferred). Must have aircraft hardware experience such as; honeycomb panels, potted inserts (screw into panel), sheet metal design, understanding of aircraft separation design/requirements. We basically need a CAD jockey for 6 months.


JOB DESCRIPTION
Responsible for the design and oversight of the wire installation, operation and maintenance of electrical components, equipment and systems.
· Develops and maintains aircraft electrical equipment installations, concepts and designs.
· Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
· Supports installation of electrical systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
· Prepares and analyzes electrical system layouts and performs design reviews.
· Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
· Designs the installation of electrical components, equipment and systems with maintenance and operational functionality in mind.
· Utilizes 3D CAD (Inventor) installations of electrical components to meet requirements.
· Bachelor's degree (B.S.) in Aerospace or Electrical engineering desired, minimum of five years relevant aerospace experience or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.
· Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES FOR THIS ROLE INCLUDE:
· Proven proficiency in 3D Inventor for design and development of aircraft wire routing drawings for shipside and monuments to latest FAA design standards to meet customer requirements.
· Understands wire schematics, system block diagrams and topologies.
· Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
· Strong working knowledge of My Boeing Fleet for OEM data sets.
· Thorough knowledge of equipment installation.
· Understanding of the certification and electrical design process.
· Ability to trouble-shoot electrical systems.
· Competent user of CAD and data management systems.
· Must be able to provide layouts and program design reviews.
 
Job Number: 17-744
Job Location: Northwest
Rate: Open
Per Diem: SPlit
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret / ANSYS required FL URGENT URGENT

Description:
Job Title: Structural Engineer
Job Number: 159123/6808601
Location: Jupiter, FL
Compensation: 75/hr
Assignment Length: 12 month contract
Active secret clearance or active within the last two years is REQUIRED
Candidates must be experienced with Ansys as their primary FEA tool.

Candidates needed! Please note that this is not a design role. Candidates should have experience focusing on structural analysis and ANSYS rather than design. Thanks!



Description:

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
. Active secret clearance or active within the last two years is REQUIRED

** Candidates must be U.S. Citizens **


** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **







Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
Perform structural analyses utilizing classic hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS.
Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
Interpret analytical results, assess design margins and prepare technical reports.
Skills:
Required:

This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis. Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
Proficiency using finite element analysis tools such as ANSYS is required.
Must have the ability to read and interpret engineering drawings.
Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Desired:

10 years combined education/experience and experience with aerospace product development efforts is desired.
Experience interfacing with structural dynamics and using system model results is beneficial.



Keywords:

Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

Education:
This position requires a BS in Mechanical Engineering or Engineering Mechanics
 
Job Number: MB-6808601
Job Location: Jupiter, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Dynamics Engineer - Rocket Engines

Description:
Duties:

Must have experience using Nastran to perform static and dynamic finite element analysis.
Assist other engineers and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural dynamic analyses utilizing finite element models and classic hand calculation methods.
Construct and solve static and dynamic finite element models with Nastran.
Exercise expertise to provide guidance to program/product team and other structural analysis team members.
Interpret and assess analytical results and prepare technical reports.
Skills:

Demonstrated experience performing structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
Proficiency using finite element analysis tools such as Nastran is required.
Knowledge and experience with aerospace product development efforts is desired.
Must have the ability to read and interpret engineering drawings.
Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
Familiarity with structural dynamic testing, vibration environment definition and analysis of high frequency data is desirable.
Education:

This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural dynamics analysis or an equivalent combination of education and experience.
 
Job Number: SH373913
Job Location: Canoga Park, CA
Rate: $70.00 per hour
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Structural Engineer

Location: Jupiter, FL
Rate: $70.00 - $75.00/HR
1 year contract


** Candidates must either have an Active Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **
** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **

** Candidates must have experience with ANSYS **

- Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
- Perform structural analyses utilizing classic hand-calculation methods and finite element models.
- Construct and solve static and dynamic finite element models with ANSYS.
- Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
- Interpret analytical results, assess design margins and prepare technical reports.

Skills:
Required:
- This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis.
- Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
- Proficiency using finite element analysis tools such as ANSYS is required.
- Must have the ability to read and interpret engineering drawings.
- Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Desired:
- 10 years combined education/experience and experience with aerospace product development efforts is desired.
- Experience interfacing with structural dynamics and using system model results is beneficial.
- Experience with static and rotating (turbines, pumps etc) structures is a plus.

Keywords:
- Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

Education:
- This position requires a BS in Mechanical Engineering or Engineering Mechanics.
 
Job Number: 7199
Job Location: Jupiter, FL
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Test Engineer

Description:
Structural Test Engineer
Greensboro, NC
Full Time Position

General Summary:
 
The Engineer will perform activities associated with all areas of structural test, including but not limited to static, fatigue and dynamic test environments. Engineer will support a wide range of test projects, which will include small component test and large full scale assemblies.
 
Duties and Responsibilities:
 
Review Test Plans/Requirements and Coordinate with Stress Engineering, Systems Engineering, Purchasing, and Quality to prepare and ensure implementation of requirements for testing activities on various static and fatigue tests
Experience working with instrumentation sensors such as, Strain Gages, Load Cells, Pressure Sensors, Thermocouples, Extensometers and Displacement Transducers
Operate, maintain and support use of digital and analog data acquisition systems
Participate in Full scale aircraft test design concepts
Inspect 3D models and create documents for test setup
Assist with witnessing and conducting tests.
Supervise conformity effort for tests.  This includes creation and implementation of conformity documentation for testing - RFC's, work orders, test deviations, and resolution of squawks
Troubleshoot and resolve test setup issues and report out on status for assigned tests
Perform analysis for adequately size test hardware and write test reports
Create and implement solutions for conducting testing including fixture design and fabrication, and lead a group of technicians and peers for accomplishing tasks
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
 
·       Mechanical, Aerospace, or related Engineering Bachelor Degree with 10+ years of relevant test experience supporting aircraft structures

Knowledge, Skills and Abilities:
 
CATIA V5, Microsoft Office, and Communication Skills
 
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: Full Time
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structure MRB Engineer

Description:
Structures MRB Engineer
Gulfstream
Savannah, GA
Rate: $62.00-$68.00/HR
Long Term contract

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformance’s for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
– Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7219
Job Location: Savannah, GA
Rate: $62-$68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Weekend Flight Test

Description:
UNIQUE SKILLS
Bachelor’s degree in aerospace or mechanical engineering. - Minimum 10 yrs. dedicated structures MRB Engineering experience at a recognized airframe manufacturer. - Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage). - Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, and Excel).
 
Job Number: 17-750-105661
Job Location: Southeast
Rate: $62.00 to $68.00/per Hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Weekend Flight Test

Description:
Structures MRB Engineer - Weekend Flight Test

Location: Savannah, GA
Rate: $62.00 - $68.00/HR
Duration: Long Term contract
Shift: Weekend 1st Shift


Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
- Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 7521
Job Location: Savannah, GA
Rate: $62.00 - $68.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer/Flight Test

Description:
Note: This is a Weekend shift

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment.
- Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62.00 to $68.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer NY

Description:
159918/4837
Systems Engineer NY / 2 openings
East Aurora NY
12 months
open rate
non-exempt

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.

PRINCIPAL ACCOUNTABILITIES

System Design
1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.


Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.

Project Management
1 Manage work packages within the established budget and schedule.

Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES
• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.

QUALIFICATIONS
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.

Request status: Open
 
Job Number: MB-4837
Job Location: East Aurora, NY
Rate: open
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Engineer / CREO systems test electrical mechanical CA

Description:
159749/12904
Title TEMP Engineer
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
$45-50/hr max


Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES:•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Provides documentation and makes technical presentations as required.
•Directs the activities of designers, technicians and may direct the activities of less experienced professional staff.
•May represent the organization in providing solutions to technical issues associated with specific projects.
•Maintains the strict confidentiality of sensitive information.
•Performs other duties as assigned.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices


*Job Qualifications

Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance.
Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables.
Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team.

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications Desired Qualifications:

•Test methods and development of Test environments
•Systems Engineering
•Electrical Engineering
•Mechanical Engineering
•Understanding of SW development and test processes
•Microsoft Office
•Microsoft Visio
•Windchill
•CREO
•KeyCreator
 
Job Number: JE-12904
Job Location: San Diego, CA
Rate: 45-50/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
Seeking 2 Technical Designers for a contract assignment in Fort Walton Beach, FL.

RESPONSIBILITIES:
Uses manual or Computer Aided Design (CAD) tools to develop and maintain mechanical/structural engineering product definition. Assists in preparation of basic design layouts. Modifies existing designs. Assists in the coordination and development work transfer packages for relevant parties. Verifies accuracy of non-technical data. Investigates and resolves routine manufacturing process or engineering related issues. Supports the maintenance of new processes and procedures by providing input related to routine aspects of the maintenance process. Works under general supervision.

REQUIRED EXPERIENCE:
CATIA V5 - Preferred

EDUCATION:
Accredited AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

WORK HOURS:
7-4pm, FIRST SHIFT
 
Job Number: 164518
Job Location: Walton Beach, FL
Rate: $43.52 - $48.35
Per Diem: Yes
Overtime: Yes
Duration: 6 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins - 843-554-5800 Ext 186
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I (FL) - CATIA V5

Description:
Uses 3D Computer Aided Design (CAD) and Manufacturing tools, to develop and maintain mechanical/structural engineering products, environments and trade studies. Prepares design layouts and modifies existing designs to satisfy customer requirements. Assists with the use of 3D laser scanning equipment used for creating as-built and reverse engineering of support equipment and, large structures and facilities. Ability to multitask and to work well within a team environment is a must. Works under close supervision.

AS or BS degree in BS Mechanical Engineering or related field. Experience with metrology, coordinate measurement systems or surveying is highly desired.
 
Job Number: TechDesFL
Job Location: Kennedy Space Center, FL
Rate: up to $38/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Product Engineer

Description:
Job Title: Technical Product Engineer
Location: Woodinville, WA. 98072
Duration: 6 - 12 Months
Responsibility
• Interface with manufacturing engineering, internal and external customers
• Performing engineering assignments related to design, analysis, test, and validation of medical devices
• Designing and optimizing mechanical components for use in medical devices.
• Creating engineering and manufacturing drawings and 3D models in accordance with applicable procedures and standards
• Supporting new product introduction from Engineering through the hand off to the production operations team
• Working with team/client to develop product validation protocols and reports
• Performing and writing validations of products, processes, and equipment in accordance with FDA and ISO guidelines
• Conduct design / product / process verification and validation requirements according to Medical Device regulations ISO 13485 and IEC 60601
• Designing, integrating, and validating new test equipment and test procedures for new and existing designs
• Create validation test plans, ATPs, and supporting documents.
• Prototyping new products and managing sample builds with in schedule and budget constraints
• Developing and implementing specialized manufacturing and assembly tooling and equipment
• Optimizing new systems and upgrades to existing processes and facilities
• Helping to resolve manufacturing and production system malfunctions, and provide technical information.
• Analyzing customer design proposals, specifications, manuals, and other data
• Excellent problem solving and time management skills
• Works precisely and pays close attention to details
• Strong mechanical aptitude and knowledge
• Advanced organizational skills, with the ability to effectively multitask
• Excellent communication and presentation skills
• Good interpersonal skills, tactful, mature and flexible
• Exceptional commitment to quality

Travel
• Some International Travel Required or as Directed

Experience Requirements
• 5 Years Engineering Experience working in US and China
• B.A. Business Administration or Equivalent
• Background in Product Design for Mass Manufacturing, in particular injection molded parts
• Expertise in CAD and CAM Software
• Experience in Medical Device Manufacturing, Engineering, and Design Transfers
• Working Knowledge of Drawings, Specifications, and Dimensional Tolerances
• Excellent Problem Solving and Time Management Skills
• Ability to Translate Designs for Production in US and China
• Understanding of ISO 13485 and ISO 9001 regulations
• Creating and Testing Device Prototypes
• Client Meetings and Detailed Analysis of Client Needs
• Understanding of FDA Rules and Regulations for Medical Devices
• Experience with Materials for Product Manufacturing

Traits & Skills
• Proactive Strategic, Analytical and Creative Problem Solver
• Proven Business and Creative Opportunities and Issues Resolutions
• Experienced in the End-to-end Product Development Process, from Ideation, Design, Development and Delivery with Proven Skills to Support Sourcing, Negotiated Costing and Timeline Management
• Strong Leadership Skills and Ability to Develop and Communicate Vision
• Strong Spirit of Service Mentality and the Ability to Work Cross-Functionally
• Superior Ability to Educate, Delegate and Motivate Direct Reports
• Negotiation Skills, Specifically in Asian Markets
• Strong Troubleshooting and Independent Problem Solving Expertise, Solution Oriented
• Tenacious Enthusiasm to Exceed Goals with a Sense of Urgency
• Ability to Communicate Clearly and Effectively with Co-workers, Vendors and Internal Customers
• Ability to Recognize and Act upon Market/Consumer Trend and Competitive Analysis Information
• Proven Client Presentation Skills/Ability
• Excellent Computer Knowledge
• Self-Motivator
• Detail Oriented
• Autonomy Through High Responsibility and Result Driven Planning
 
Job Number: 3399
Job Location: Woodniville, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Product Engineer - Medical Devices

Description:
Interface with manufacturing engineering, internal and external customers
Performing engineering assignments related to design, analysis, test, and validation of medical devices
Designing and optimizing mechanical components for use in medical devices.
Creating engineering and manufacturing drawings and 3D models in accordance with applicable procedures and standards
Supporting new product introduction from Engineering through the hand off to the production operations team
Working with team/client to develop product validation protocols and reports
Performing and writing validations of products, processes, and equipment in accordance with FDA and ISO guidelines
Conduct design / product / process verification and validation requirements according to Medical Device regulations ISO 13485 and IEC 60601
Designing, integrating, and validating new test equipment and test procedures for new and existing designs
Create validation test plans, ATPs, and supporting documents.
Prototyping new products and managing sample builds with in schedule and budget constraints
Developing and implementing specialized manufacturing and assembly tooling and equipment
Optimizing new systems and upgrades to existing processes and facilities
Helping to resolve manufacturing and production system malfunctions, and provide technical information.
Analyzing customer design proposals, specifications, manuals, and other data
Excellent problem solving and time management skills
Works precisely and pays close attention to details
Strong mechanical aptitude and knowledge
Advanced organizational skills, with the ability to effectively multitask
Excellent communication and presentation skills
Good interpersonal skills, tactful, mature and flexible
Exceptional commitment to quality
Travel:
Some International Travel Required or as Directed
Traits and Skills:
Proactive Strategic, Analytical and Creative Problem Solver
Proven Business and Creative Opportunities and Issues Resolutions
Experienced in the End-to-end Product Development Process, from Ideation, Design, Development and Delivery with Proven Skills to Support Sourcing, Negotiated Costing and Timeline Management
Strong Leadership Skills and Ability to Develop and Communicate Vision
Strong Spirit of Service Mentality and the Ability to Work Cross-Functionally
Superior Ability to Educate, Delegate and Motivate Direct Reports
Negotiation Skills, Specifically in Asian Markets
Strong Troubleshooting and Independent Problem Solving Expertise, Solution Oriented
Tenacious Enthusiasm to Exceed Goals with a Sense of Urgency
Ability to Communicate Clearly and Effectively with Co-workers, Vendors and Internal Customers
Ability to Recognize and Act upon Market/Consumer Trend and Competitive Analysis Information
Proven Client Presentation Skills/Ability
Excellent Computer Knowledge
Self Motivator
Detail Oriented
Autonomy


Experience Requirements:
5 Years Engineering Experience working in US and China
B.A. Business Administration or Equivalent
Background in Product Design for Mass Manufacturing, in particular injection molded parts
Expertise in CAD and CAM Software
Experience in Medical Device Manufacturing, Engineering, and Design Transfers
Working Knowledge of Drawings, Specifications, and Dimensional Tolerances
Excellent Problem Solving and Time Management Skills
Ability to Translate Designs for Production in US and China
Understanding of ISO 13485 and ISO 9001 regulations
Creating and Testing Device Prototypes
Client Meetings and Detailed Analysis of Client Needs
Understanding of FDA Rules and Regulations for Medical Devices
Experience with Materials for Product Manufacturing
 
Job Number: 3399
Job Location: Woodinville, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - RPSTL

Description:
RPSTL (Repair Parts & Special Tool List) with Logistics Analyst

5+ years’ experience in technical writing with a background writing for mechanical products
Strong work ethic and positive attitude.
Hands-on experience reading/using Engineering drawings/blueprints.
Provide technical support to client for revision, editing and authoring of technical data pertaining to U.S. Army utility helicopters (UH-60 A/L/M).
Receive and review ECN (Engineering Change Notices) and implement applicable changes to the RPSTL (Repair Parts & Special Tool List).
Collaborate with client and technical representatives to perform author processes to RPSTL data.
Verify provisioning data using the PLISN (Provisioning List Item Sequence Number) for accuracy and provide notification and course of action to correct any issues noted.
Utilize client Aircraft Management System online data base tracking system for management of publications.
Additional tasks may include DOs (Delivery Orders) and PCRs (Publication Change Requests) in addition to ongoing activities that must be accomplished in a timely manner to meet deadlines.
Strong computer skills with a working knowledge of Adobe Acrobat, MS Office applications, desktop publishing systems.
Will consider a Technical Writer with a background in IPB. Experience with military publications is preferred. Familiar with IETM (Interactive Electronic Technical Manuals). Prior experience with XML a plus. 

QUALIFICATIONS

RPSTL writing experience.  Prior experience in military rotor wing publications preferred.

B.A./S., A.A./S., High School Diploma or GED
Must be able to read Engineering Drawings
Familiarity or experience with Parts Databases (PowerLOG or SLIC)
Familiarity with parts indenturing; BOMs (Bill of Materials)
Able to communicate effectively with customers and relay instructions to Illustrators and Provisioners
Familiarity and/or experience with S-1000D, MIL-STD 40051 and MIL-STD-38784 specifications.
Familiarity with XML, Content, IADS4, Adobe apps, Xyvision
Able to work paid overtime
Able to communicate effectively with customers and relay instructions
 
Job Number: 52079
Job Location: Huntsville, AL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
Technician

Location: Littleton, CO / Waterton, CO
Duration: 5-6 months

Position Description
Performs a variety of duties in the electronic mechanical electromechanical or optical areas. Constructs troubleshoots calibrates adjusts tests and maintains equipment components devices or systems. Works from engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments modifications and replacements as directed; prepares prescribed compounds and solutions

Skills Required
Strong mechanical aptitude and familiarity with the proper usage of mechanics hand tools and power tools

Skills Preferred
Experience in aircraft/aerospace assembly. Past experience working in a aerospace environment. Process equipment (oven) programming/operation Composite material and Process development/fabrication experience. Operate NC mills and routers and manually operate lathes, grinders, saws, and other various shop tools.

Experience Required:
0 - 3 years work experience

Education Required:
HS Diploma or equivalent

Education Preferred:
Aircraft & Powerplant license or similar professional certifications, preferred but not required.
 
Job Location: Littleton, CO / Waterton, CO, CO
Per Diem: yes for one year
Overtime: possible
Duration: 5-6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Diwakar Chaubey
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer

Description:
Thermodynamics Engineer (Level 2 – Level 4)

Location: Centennial, CO
Pay Rate: Depends On Experience (DOE)
Duration: 1 year contract
**MUST be a U.S. CITIZEN**

Job Description
-Performs thermal and/or fluids analysis at both the detailed component level and the systems level.
-Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed.
-Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems.
-Develops specialized analytical tools as required to perform these functions.
-Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient.
-Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
-Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
-Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
-Ability to build analysis models and tools based on program needs.

Preferred Qualifications
-Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
-Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products, MATLAB, Sinda/FLUINT, and GFSSP
-Demonstrated proficiency applying analysis results to hardware solutions is desirable
-Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
-Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
-Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 7708
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer

Description:
Thermodynamics Engineer

My client is looking for Thermodynamics Engineers to perform thermal and/or fluids analysis for rockets. These are contract positions. Location is the Denver Tech Center.

Here is the job description:

Thermodynamics Engineer

Job Description
Performs thermal and/or fluids analysis at both the detailed component level and at the systems level. Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
• Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
• 10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
• Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
• Ability to build analysis models and tools based on program needs.


Preferred Qualifications
• Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
• Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products, Matlab, Sind/FLUINT, and GFSSP
• Demonstrated proficiency applying analysis results to hardware solutions is desirable
• Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
• Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
• Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision



There are multiple positions available. The location is Denver.

The rate is open. The duration is 11+ months.

US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.

If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!

Thank you!
 
Job Number: mm170801cjThermo
Job Location: Centennial, CO
Rate: Open
Per Diem: Possible
Overtime: Not likely
Duration: 11+ months
Start Date: August, 2017
Input Date: 11/14/2020
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Michael Mendocha
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Maker / no clearance / tool and die or jig and fixture / form block template making / hand tools and Shop Machinery / Blueprint reading / metrology (i.e. Laser tracker, measuring devices) / 10 openings! URGENT URGENT CA

Description:
160049
Requirement #AERO-REQ-0623
Work Location Palmdale, CA
Work Week 9/80-A
Priority High

Number of Resources 10



Title: Tool Maker

Description

Plans the job, determines methods and sequence of operations, makes layouts, fabricates, assembles and proves complex tools and dies such as tool masters, master tooling gauges, deep draw, multiple, cam action and compound dies and constructs all types of sizes of major jigs, fixtures, tool masters, master tooling gauges and related tooling, where critical reference points, surfaces, locators and tooling holes must be established and coordinated among three or more nonparallel planes or two or more radial profiles, and it is required to exercise a complete knowledge of jig and fixture building, tool and die making, and machine shop theory and practice, including the principles and use of applicable optical equipment; prepares the breakdown of all types and sizes of major jigs and fixtures, tool masters or master tooling gauges into components, details and accessories as required for the construction of these tools by other employees; determines the methods and sequences of fabrication and assembly, and coordinates the work of such employees; performs the final setup and assembly of components, details and accessories and follows such tools through to completion and sell-off. May develop, fabricate, and prove optical and mechanical accessories for the purpose of adapting and modifying optical instruments and similar equipment used in building and checking major tooling. Performs modification and rework of the level of difficulty of the operations described above. Demonstrates a complete understanding of the principles and use of applicable optical equipment such as theodilites and computer aided measuring equipment such as laser trackers. Must posses a minimum of four years of experience working in tool and die or jig and fixture building, form block and/or template making or equivalent.

NEED 10 RESOURCES FOR THIS POSITION.


Skill/Experience/Education
Mandatory:

Four years of experience working with tool and die or jig and fixture. Experience with form block and/or template making or equivalent. Experience with hand tools and Shop Machinery. Experience with Blueprint reading. Experience with metrology (i.e. Laser tracker, measuring devices)




Shift 1st Shift
OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 50.00 USD
5-8 YrsPay Rate: 55.00 USD
9+ YrsPay Rate: 60.00 USD
 
Job Number: JE-0623
Job Location: Palmdale, CA
Rate: 50-60/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Mechanical Systems Design & Analysis Engineer III - MO

Description:
Engineer/Scientist 3 assigned to the Support Systems Mechanical Ground Support Equipment Sub Systems Team. The Mechanical Sub Systems Support Equipment (SE) Team is the team within the Support Equipment and Services organization that is responsible and accountable for defining, proposing, developing, delivering, and supporting high quality, affordable SE required at the Organizational and Intermediate maintenance levels to meet our various customer's needs and requirements. This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft. Candidates will be required to apply their knowledge of engineering principles, aircraft systems, aircrew operations, maintenance procedures, and manufacturing operations to define, support and improve system operability with emphasis on affordability. Successful candidates will be expected to learn quickly and become capable of independent function within the team in short order. Candidates will need to have strong Systems Engineering and Project Management skills. This position is a mix of technical project management and managing/overseeing delivery of Support Equipment end items. Candidates will be expected to have strong oral and written communication skills that will enable them to effectively interact with internal and external customers and suppliers as well as team members from multiple disciplines.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Ability to define, specify, & evaluate mechanical ground support equipment requirements & architectures for adherence to company, customer, quality & regulatory requirements. Ability to create and manage schedules, as well as coordinate installation and delivery of equipment. Ability to translate functional requirements into designs/specifications and ultimately into fielded systems. Proficiency in oral and written communication is required. Must be highly motivated, self-starting and comfortable dealing with diverse people and disciplines. Previous experience in a multi-disciplined team environment, and frequent interaction with suppliers and customers is desired. Experience with mechanical ground support equipment and logistics (technical publications, provisioning, spares, etc) is desired.
 
Job Number: UGMO
Job Location: Hazelwood, MO
Rate: up to $47/hour, DOE
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WB-WPB Flight Test-Grade 10

Description:
PURPOSE
Flight test planning, instrumentation checkout, flight test conduct (including real-time monitoring), post test data analysis, and reporting on helicopter flight tests in structures and dynamics.

COMPETENCIES
1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
3. Large volumes of gathered flight data are processed and analyzed.
4. Certification and/or qualification tests are summarized in reports.

EDUCATION AND EXPERIENCE
- Bachelor's in Aerospace or Mechanical Engineering as a minimum
- Candidate must have flight test or aerospace design experience
- Rotary wing experience preferred.
 
Job Number: 17-702-1581
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing & Engine Anti-ice Design Engineer

Description:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Prepare 3D layout models of the Wing and Engine Anti-ice Systems
• Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems
• Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
• 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years experience
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required
• Knowledge of Aircraft Wing and Engine Anti-ice Systems
 
Job Number: 28-026
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engineer

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Ridley Park, PA, is home to the V-22 Osprey Tiltrotor and the H-47 Chinook Helicopter. These aircraft are designed, tested, and manufactured at the site. In addition, the Ridley Park site hosts an Enterprise Support group which provides design and analysis of structural, mechanical, and electrical systems for Commercial Aircraft and Military Derivatives. There are approximately 5,000 people at the site, more than 250 of them are Electrical Engineers. The plant is situated along the Delaware River approximately 10 miles southwest of Philadelphia, and 2 miles from the international airport.

Engineers considered for this position will develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. >5 Years design experience on an aircraft platform. Skills - Preferred, CEEDS, IPDM Intermediate level. Must be US Person for purposes of Export Compliance.
 
Job Number: 38653
Job Location: PA
Rate: 60/hour
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YE - Airframe Design - Grade 07

Description:
PURPOSE OF ROLE
The selected candidate will provide support to Air Vehicle Design and Manufacturing Engineering Organization in the following areas:
The ADME Core Services Group supplements ADME’s technical expertise with best-in-class systems engineering capability enabling our functional org to excel in meeting its business objectives. The Requirements Management pillar of Core Services focuses on providing expertise in the development and management of requirements and interfaces for ADME’s Integrated Product Teams (IPTs) to support critical program objectives.
The Core Services Requirements Development Analyst would be responsible for concurrently shepherding multiple IPTs as described above, perhaps spanning multiple programs and ADME groups with subsequent exposure to multiple Program and Functional Management Teams.

JOB DUTIES
1. Lead Requirements Flowdown Activity including Verification and support development of Interfaces for ADME Subsegments. This includes development, release and maintenance of Allocated and Product Baseline level client Engineering Specifications.
2. Liaison between ADME Subsegments and System Engineering assisting requirement derivation, flowdown, compliance and verification efforts at the Customer, Functional and Allocated baseline levels.
3. Coordinate Requirements Management efforts with other Core Processes pillars including Supplier Development, Risk Management & EVM to maximize IPTs’ overall success.
4. Develop best practices including metrics and reports to track requirements and interface development against program milestones as well closure of gaps and compliance items.
5. Prepare data and present requirements flowdown status and compliance/risk at key customer milestones: milestones (SRR, SFR, PDR, CDR, and PRR).
6. Utilize DOORS as the main tool to perform all requirements and interface development as well as document release.

SKILLS & EXPERIENCE
• BS in engineering or equivalent
• Minimum of 5-7 years of experience in Requirements Management
• Have a detailed working knowledge of Air Vehicle systems including Airframe, Propulsion, Subsystems, Landing Gear, Electrical Wiring and Equipment and, Mission Systems as well as equipment, and components whose primary function is mechanical in nature.
- Examples include: arresting and landing gear, auxiliary power, crew escape, canopy, aerial delivery, cockpit displays, environmental control, fire protection, flight control, fuel, hydraulic, wheels/tires/brakes, life support, mechanical systems (e.g., door drives), pneumatic, and electro-mechanical elements of electrical power and wiring systems that conduct power or data between major components, connectors, and sub-components.
• Experience in leading and executing complex tasks
• Experience in Requirements Management and Systems Engineering is a required
• Ability to communicate effectively with senior leadership and working level teammates.
• Highly motivated and flexible individual with a track record of demonstrated results
• Must be proficient in using DOORS, MS Excel, MS Word, MS Power Point, and MS Access.
 
Job Number: 17-768-1575
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YJ – MASS Grade 07

Description:
DESCRIPTION
Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned). Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SMEs. Good ability to communicate work progress to the IPT CAM for Earned Value progress entry. The candidate must possess the ability and experience to provide technical oversight and review of supplier generated drawing package and 3D CATIAV5 (LCA) models. Ability to work in an IPT team environment (with system engineering, structural analysts, weight/balance engineer, materials, manufacturing, test, team members) with good communication skills is a must. Tracking status and monitoring progress of external design center drawing packages and similar tasking will be required.

EDUCATION
Bachelor of Science Mechanical Engineering
 
Job Number: 16-614-428
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YL - COMPONENT INSTALLATION - Grade 07

Description:
COMPONENT INSTALLATION DESIGNER
The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired.
Assignments in the Component Installation Section require the knowledge of Electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematics, manufacturing practices as well as the ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas, lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
LCA experience preferred.
 
Job Number: 17-762-1536
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YM - PROPULSION - Grade 10

Description:
PURPOSE
This specific position will concentrate on the test-conduct phase to include attendance at flight briefs, TM-monitoring and flight de-briefs.

JOB DUTIES
1. Participate within existing teams to support the planning, conduct, and reporting of propulsion related helicopter ground and flight tests.
Test typically include thermal surveys, fire extinguishing and suppression system evaluations, determination of installed engine power, inlet and exhaust surveys, and characterization of engine-airframe compatibility together with FADEC-based control systems, fuel systems, and environmental control systems.
2. The job will require the acquisition of significant volumes of data that must be examined for quality, processed, analyzed and presented to various stake-holders
3. Adherence to flight test processes, safety procedures and ITC/ITAR requirements is essential for any candidate responding to this posting.

SKILLS REQUIRED
- Candidate must possess prior flight test and propulsion-systems related technical knowledge; fixed wing experience is acceptable.
- Knowledge of data systems and instrumentation performance (thermal / pneumatic) is required.
- Candidate must accept flexible working hours to include OT and weekends and - Candidate is expected to be a self-starter who quickly assimilates with the team and can contribute immediately. Initiative and self-reliance are paramount traits.

EDUCATION/EXPERIENCE
Bachelor's degree in Aerospace Engineering or Mechanical Engineering with a minimum of 5 years' experience in aerospace.
GPA: 3.0 from accredited school of engineering.

OTHER
Must be a US Citizen
 
Job Number: 17-769-1593
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
junior Embedded System Test Engineer

Description:
Job Title: junior Embedded System Test Engineer

Degree: Electrical, Computer Science, Mech. Or Aerospace degree with their internship or projects in Embedded System will be mandatory.

Location: Irvine, CA

Experience: 0-3 years



Detailed JD:

· Bachelor’s degree (BS) in mechanical, aerospace, electrical engineering or computer science

· Embedded or System Test Engineers including development of functional and requirement based test procedures, generation and debug of test and post processing scripts

· Test Case Development

· Test Procedure Development

· Debug, Execute and generate report

· Problem Report in case of any issues

· Candidate may be required to support shift hours outside of traditional 1st shift hours as assigned, 40 hrs/week on any of the five days
 
Job Number: 52086
Job Location: Irvine, CA
Duration: 12 months+
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Back to Advanced Job Search