Job Search Results

189 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/12 Tuesday 08:21PM Pacific Time by ContractJobHunter. )

Listings 1 - 189

Go To My Job Tracker

Expand all descriptions

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Applications Engineer

Description:




Applications Engineer



Location: Saginaw, Michigan



SCHEDULE
:

7:00 AM – 4:00PM 



SUPERVISOR:

Engineering Manager

Summary

 The Applications Engineer will be accountable to evaluate customer requests and site drawings, to ensure fit and function of our product. An application engineer will provide in-depth technical knowledge for all of our products in pre-sales and post-sales roles. You will provide sales drawings in Solid Edge Works and provide review of specifications specs to support the sales estimating and bidding processes. You will be a part of the product team and oversee equipment designs for fit and function. You will collaborate with R&D when new products are to be transferred in to production to ensure that our standards are kept and captured for reference. As a subject matter expert (SME) you will be a resource to the designers to transfer your knowledge in a way that will forward their ability to handle jobs accurately and efficiently. You will communicate with our customers and manufacture's representatives to ensure that we have whole and complete information. While communicating with outside sources, you will represent our company in a positive light only disclosing product and company data as appropriate for sales. You may be called upon to train our personnel as needed. Occasional travel, (up to 20%), may be required to visit sites, measure and ensure a fit for the customer and DC. You will be accountable to meet the product group standards, as assigned by the Engineering Manager. 



Essential Functions:

  • Listen to the needs of our customers and apply the correct equipment that will meet their needs.

  • Understanding of Wastewater, Storm water processes and various industrial processes.

  • Accountable for timely, detailed review of customer specifications to accurately support sales in bidding projects. Applying our application protocols, while assessing the needs of the project and coordinating information with other subject matter experts internally.

  • Exceptional customer service through professional, timely and accurate design support, communications etc.

  • Ensure our design standards are kept in tact through all phases of our projects.

  • As a subject matter expert (SME) you will be required to problem solve, learn new concepts and contribute sound application engineering to the company's products and processes.

  • Sales drawings turned around in 2-5 days (as required to support Sales), all drawings are to be delivered on time, consistent to DC standards, within budgeted hours and customer requirements.

  • Attend handoff meetings at receipt of PO and release to engineering; must support project application prior to submittal release as required to meet customer/DC Schedules.

  • Capture lessons learned with the product team, assess and implement changes/updates as needed into the application process and integrate this knowledge in to sales project management processes.

  •  Applications Engineer will ensure accuracy of engineering protocols, documented procedures.

  • Shall have in-depth knowledge of pricing, labor, alternative materials, marketing objectives & sales process.

  • Will follow all standards/processes as designated by company's QC, ERP and other process controls.

  •  Accountable for whole and complete product (fit and function) from proposal to post-sales.

  •  Due to the amount of interactions between customers and our internal teams; this position requires you to work in the office environment.




Education:



Bachelor Degree preffered  but not required.



College degree in Mechanical Engineering, Engineering Technology or Architectural Technology is strongly preferred or equivalent experience considered. .



Experience Required:


  • Required: Engineering of mechanical equipment 3 years or Architectural/Construction engineering 8 years 

  • Required: Computer Experience & Proficiency: MS Office programs, such as Outlook, Word and Excel


Required:


  • Proficiency in Solid Works or Solid Edge along, able to understand and translate mechanical blueprints.

  • Exposure to machinery design and mechanical concepts. Proven experience in resolving mechanical engineering production issues for equipment.


 Skills:


  •  Able to understand and create drawings (mechanical and civil) to industry standards.

  • Meticulous attention to detail, able to multi-task well and complete projects on time, within budget, to the customer's satisfaction.

  • Must have excellent customer and people skills: should be able to represent the company's image (consistent with the business motto of "you'll like working with us!”)

  • Must be self-initiating, independent, and able to organize time and diverse responsibilities.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33344
Job Location: Saginaw, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-12 00:00:00.0
Input Date: 08/12/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Northford, CT.  
Please reach out to Betsy Murphy bmurphy@pdstech.com or call her at 203.415.9123

In this role, you will make fire protection controls and safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble electromechanical parts by using power drivers and/or manual tools.
  • Test Assembly Boards using automatic computer type testers.
  • Assemble metal boxes for the finished units using power drivers or manual tools.
  • Assemble carton boxes and inserts to pack the finished units.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080250
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/10/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fQSAAY&URLSource=cjhunter

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Systems Engineers - China - Contract

Description:
Avionic Systems Engineers - China - Contract.

Our Client in China is developing Cockpit Display Systems for the latest commercial aircraft. They are looking to add several Avionic Systems Engineers to work on  Specification Development and Modelling Development.

The chosen Engineers should be familiar with civil aircraft subsystems function, logic and physical architecture and modelling process. For the modelling development role, an engineer with a Software background is preferred.

Candidates should be prepared to work in China for up to one year on a contract basis.
 
Job Number: BH-226
Job Location: China, China
Rate: Negotiable
Per Diem: --
Overtime: --
Start Date: 09/30/2019
Input Date: 10/01/2019
Last Updated: 10/29/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Business Manager - Engineering Services

Description:
Job Title:      Business Manager Engineering Services
Location:      Seattle, WA
Salary:           Base + Commission
Job Type:      Full Time w/ benefits
 
  

PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.
 
Description/Tasks
Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
The candidate should have capacity to:

  • Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
  • Develop customer relationships
  • Steering call for tender, financial proposal, team selection.
  • Management of resources working on projects
  • Steering project and deliveries.
  • Being target and results oriented
  • Start date:  ASAP.

Qualification/Experience
  • At least 2 years’ experience in aeronautics, in Engineering or Sales.
  • Minimum of Engineering Bachelor’s degree or similar from an accredited university.
  • Excellent presentation and communication skills are required.
  • Dynamic, hard-worker and passionate for technologies
  • Availability for business trip/travel in different states.
  • Home base: Seattle area.


More information on AKKA Technologies Group can be found on www.akka-technologies.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.




 
 
 
Job Number: 1910106765
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/24/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer Lead, Environmental/Sewer

Description:
*This is a full time salaried position, located in Mount Holly, NJ.*

*Full benefit package including bonus*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing and modelling sewer and storm water management/distribution, wastewater treatment, runoff and similar town/city infrastructure.



Work will include water and wastewater design experience including distribution, collection, pumping stations, public water supply wells, and treatment facilities. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:

*5 years’ experience in Environmental/sewer design engineer, stormwater runoff/drainage design or similar design and engineering projects.

*Experience working as a lead.

*Must reside within 1hr of Mount Holly, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT



Pluses:

*PE
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience


Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 50
Job Location: MT Holly, NJ
Rate: DOE
Per Diem: yes split
Input Date: 09/18/2019
Last Updated: 11/01/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Combat Vehicle Mechanic

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.
Combat Vehicle Mechanic
(U.S. Citizenship Required*)
Sumner, WA
2019-9660

Responsibilities:
• Provide a broad spectrum of services dependent upon the organization they support.
• To ensure the flexibility to meet customer requirements, must be capable of performing a variety of tasks including scheduled and unscheduled maintenance, troubleshooting, repair and retrofit (improve invulnerability and survivability) on the Army’s Stryker family of vehicles (FOVs) components pursuant to applicable contracts within the organization.
• Repair of Driveline components including Differentials, Wheel Drives / Steer Wheels, Transfer cases and other related components.
• Scheduled maintenance: Periodic and preventative manufacturer (in accordance with the IETM) required maintenance to extend the life of the vehicle and/or performing upgrades as mandated during a designated period of time by customer.
• Unscheduled maintenance: The emergent, corrective or restorative maintenance requirements not previously planned or programmed but require prompt attention and must be added to, integrated with, or substituted for previously scheduled workloads.
• Troubleshooting: Systematically identifying issues and problems within the complex mechanical systems, electronics, computers and software systems within the Stryker family of vehicles.
• Meet safety requirements with OSHA, ANSI and ASME industrial standards, compliance and technical training, administrative duties to meet contract obligations and organizational requirements, adhering to Federal Acquisition Regulation (FAR) compliance.
• Other duties as may be required / assigned.

Qualifications:
• The ability to use calibrated measuring equipment such as micrometers, height and depth gauges and other associated tooling.
• Work in improved and unimproved maintenance facilities as well as field environment.
• Ability to work independently with minimal supervision and organize/prioritize multiple tasks.
• Must be able to foster and enhance teaming environment.
• Working knowledge with Microsoft Office software including Word, Excel, PowerPoint, Access and Lotus Notes preferred.
• Proven ability to perform multiple tasks within multiple work stations.
• Demonstrated good housekeeping skills and ability to convey such practices to team members.
• Ability to work extensive extended hours in a fast paced, challenging, high pressure environment.
• Ability to be issued and maintain company AMEX card
• Ability to deploy and meet requirements where and when needed to support
• fielding missions.
• CONUS and OCONUS as required
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma combined with 3-5 years mechanic experience maintenance on tactical/combat vehicles preferred (- 91B, 91S, 63S, 63W or 63B MCM or USMC MOS' 2147, 3521, 3522, 3524) Experience on Stryker, LAV 2.5 or LAV III desirable.
• Documented commercial training and/or experience acceptable in lieu of military vehicle experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9660
Job Location: Sumner, WA
Input Date: 10/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Continuous Improvement Manager

Description:
Develop and implement policies, procedures, goals and objectives for effective management and operation. Assist site management to coordinate, plan and execute performance improvement initiatives.
Manage and coordinate the Industrial Engineering group functions, assignments and priorities.
 
Job Location: Jacksonville, FL
Rate: negotiable salary
Duration: Direct
Start Date: ASAP
Input Date: 10/09/2019
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Barbara A McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Continuous Improvement Manager

Description:
Develop and implement policies, procedures, goals and objectives for effective management and operation. Assist site management to coordinate, plan and execute performance improvement initiatives.
Manage and coordinate the Industrial Engineering group functions, assignments and priorities. 7 t0 10 years experience including 3 years of supervisory experience. 4 year degree in Industrial or closely related field.
 
Job Location: Jacksonville, FL
Rate: negotiable salary
Duration: Direct
Start Date: ASAP
Input Date: 10/09/2019
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Barbara A McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrator

Description:
Contract Administrator

Rome, NY
$29/hr
3 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Contracts group supporting Industrial Programs has an immediate need for a Contracts Administrator in its Rome, NY site. The successful candidate will be responsible for all facets of contract administration on development and production programs for industrial end users.

Duties include, but are not limited to: receipt, review, and processing of customer solicitations/RFPs; proposal preparation; review and negotiation of contract terms and conditions; preparation of contract documents including non-disclosure agreements and memoranda of agreement; order reviews and acknowledgments; order entry; forecasting the demand for particular products to drive supply chain activities; managing customer demand by analyzing trends, managing forecast tools, and maintaining accurate data; flowdown of contract requirements to internal stakeholders; change management; identification of contract and business risk; accounts receivable support/reporting; audit support; and contract close out as well as company initiatives including ACE, standard work and business financial goals.

This position requires a Bachelor's degree plus 3 years experience relevant to Contract Administration. In the absence of a degree, 7 years of relevant experience is required.

Ideal candidate will:
• Have exceptional written and verbal communication skills
• Be able to effectively communicate with all levels of employees and management
• Possess strong analytical and problem-solving skills
• Be highly efficient and self-motivated
• Always be professional
• Adhere to policies and implement changes as required
• Adapt to competing work priorities
• Have a strong focus on continuous improvement
• Maintain a keen focus on results
• Have SAP experience
• Have proficiency in software programs such as: Microsoft Office Word, Excel, PowerPoint and Outlook.
 
Job Number: 11155
Job Location: Rome, NY
Rate: 29.00
Per Diem: No
Overtime: Possible
Duration: 3 mos
Start Date: ASAP
Input Date: 07/08/2019
Last Updated: 10/07/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Documentation Control Associate III

Description:
Creates and/or improves existing documentation procedures, and streamline across various product teams. Establishes and maintains consistency of databases and documentation as well as corporate processes used to ensure quality, design requirements, and environmental compliance. Manages and maintains as well as analyzes and interprets the consistency for all documentation and support systems to ensure quality. Follows established procedures and formats, researches and compiles technical data for use in routine documents or sections of documents such as manuals, procedures and specifications. Obtains data and information from review of documentation, drawings, schematics and reports, consultation with technical staff members.  Typically requires  5-7 years of experience.  Provides more technical/functional support than administrative support. Demonstrates a thorough working knowledge of technology, applications, terminology, and procedures required of job function. Performs varied and more complex tasks. Makes decisions within broad parameters.

SCOPE OF WORK

This position serves as a resource on the Project Management team and provides administrative and technical support for large capital projects managed by Our Client's PMT team. Experience with project management and collaboration systems is preferred.

Our Client' project management systems include:

•             SAP and SharePoint primarily; experience with these systems are preferred but not required.
•             Must have a functional understanding of electronic data management.
•             Functional understanding of project execution and phase gates is preferred.
•             Experience working on Alaska or other arctic projects is preferred.
•             Project support involves multiple tasks that are schedule driven. Strong organizational and communications skills are  critical to effectively supporting our clients. This position supports a wide area network of resources assigned to Our Clients projects.
•             Strong interpersonal skills are necessary to respond to various project support requests.
•             Training is provided on Our Clients project management systems. Experience with other project management systems is preferred.         

CategoryNameRequiredImportanceLevelLast UsedExperience 
CertificationsASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code for Materials (BPVC-II)Yes5     
EducationBachelor's Degree in Mechanical EngineeringYes2     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Piping CodesYes1     
GeneralOil and Gas IndustryYes3     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel (BPV) CodesNo5     
GeneralKnowledge of Heavy Industrial Manufacturing OperationsNo5     
SoftwareMS OfficeYes4     

Additional Competencies:• Knowledge of CPAI criteria and specifications
• Knowledge of ASME piping codes B31.3, 31.4, and 31.8 
• Knowledge of API piping inspection and repair (570)
• Familiarity with DOT, ADEC, and SPCC regulations
• Capable of performing pipe stress and flexibility analyses (preferably using AutoPIPE software)
• Good written and oral communication skills

 
Job Number: 1910104590
Job Location: Anchorage, Ak
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUAeQAO&URLSource=cjhunter

Electrical Engineer-Power Distribution

Description:
This position will be responsible for process work for varied clients including LV/MV power distribution, combined heat and power unit integration, utility transmission and distribution on multiple projects of various sizes.
Facilities electrical power distribution schemes, grounding and lighting studies.
Industrial power plant electrical systems evaluation and design preferred; with related experience in chemical, petroleum and other industrial process plants acceptable
Development of construction document packages including required specifications and drawings that will be utilized for bidding and construction.
 
Bachelor of Science in Electrical Engineering required
10+ years of experience
Professional Engineer Registration preferred
Experience designing low voltage (<600V) and medium voltage (<15kV) electrical power distribution systems. >15kV a plus.
Experience developing electrical construction packages for industrial facilities a plus
CAD software knowledge a plus but not required
Experience using Power System Study software (such as EasyPower, SKM, or ETAP) a plus
Travel 10-15% of time
Detailed experience in the development and implementation of power process electrical systems required.

 
 
Job Number: 1910104725
Job Location: Appleton, WI
Duration: 6 months
Input Date: 07/30/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Timothy Glapa
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUeAQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Electrical M.E.:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
-Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
-Develop the specific methods and instructions for manufacture and/or assembly of products.
-Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
-Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Job Details:
Education / Certifications BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11376
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/20/2019
Last Updated: 10/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental Health & Safety - Level 4

Description:
Location: Riverside, CA
Rate: $51.54/Hr
Shift: 1st
Duration: 1-year assignment
**US Citizen or Permanent Resident**
**No Relocation Compensation / No Per Diem Split**

Job Description: This is considered a Level 4- Mastery position.
RESPONSIBILITIES
* Conducts site safety inspections and daily walk-throughs.
* Leads safety meeting
* Trains new hires on safety and environmental issues. May provide development for the company in EHS training programs.
* Assist the Business Unit with Conducting the Job Hazard Analysis and Risk Assessment
* Conducts fire safety inspections and provides fire safety training.
* Evaluate and recommend PPE for various Business Unit
* Ensures that safety and environmental rules and regulations are adhered to. May ensure standards and controls, and policies and procedures are identified for regulation compliance. May coordinate with government agencies for arbitration's, inspections, regulations, etc.
* Advises managers regarding safety compliance and environmental issues.
* Incorporates and maintains safety observances by working with Business Unit Leaders
* Conduct accident investigation and assist with evaluating corrective and preventive action s
* Review KPIs and analyze opportunities for improvement
* Conduct employee or area monitoring following industrial hygiene practices and policies
* Assist Human Resources with management of workers' compensation claims.
* Performs other duties as assigned
EDUCATION
* Associate's or Bachelor's Degree or CSP designation preferred with course work in chemistry, biology, math, or related field.

WORK EXPERIENCE
* 3 - 5 years' experience in an industrial or plant facility.

KNOWLEDGE AND SKILLS
* Knowledge of OSHA, EPA and DOT regulations.
* Ability to identify hazards and unsafe work practices.
* Ability to train employees on issues relating to safety and to troubleshoot safety concerns.
* Good leadership and interpersonal skills.
* Must possess a valid Driver's License with an acceptable driving record.

TRAVEL
Occasional
 
Job Number: 11438
Job Location: Riverside, CA
Rate: $51.54
Per Diem: No
Overtime: Possible
Duration: 1 Year
Input Date: 09/04/2019
Last Updated: 11/04/2019
Firm Name: INCONEN CORPORATION
Attention: Bernice Nabayan
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Fatigue and Damage Tolerance Engineer

Description:
Chipton-Ross is seeking a Fatigue and Damage Tolerance (F&DT) Engineer for an opening in Arlington, TX.

RESPONSIBILITIES:
Structural analysis tasks in support of Airframe Structural Test and Certification. Tasks can include:
" Perform F&DT tasks related to trade studies to determine best design approach to meet airframe design requirements.
" Provide F&DT support for design layouts, including determination of optimum loads paths, material and hardware selections, and least weight / low cost designs.
" Provide F&DT sizing and analysis for airframe preliminary design.
" Provide sizing updates and final analysis for detail design releases.
" Calculate fatigue life and inspection intervals of airframe components
" Prepare F&DT certification reports
" Preparation of test requirements, test plans, test reports, internal loads correlation, and other analysis and documentation related to structural testing
" Communicate with internal and external team members effectively.

REQUIRED EXPERIENCE:
Fatigue and Damage Tolerance (F&DT) engineer experienced with metallic and composite airframe, or related structures. Provides fatigue and damage tolerance analysis support for new product development from conceptual through detail design. Some knowledge and experience is required in the following areas, with substantial experience and expertise in many of these areas:
" Airframe structural criteria / requirements
" Aircraft Fatigue spectrum development
" Aircraft Fatigue analysis and life prediction
" Aircraft damage tolerance analysis and inspection interval calculation using NASGRO or similar tools
" Calculation of stress concentrations using classical and FEA methods
" F&DT report preparation
" F&DT support for manufacturing and change board
" F&DT support for structural test including coupon, design development, component and full-scale static and fatigue, and flight test
" F&DT support for damage limits, structural repairs and mods to support repair limits and structural repair manual preparation.
" Trade studies
" Preliminary and final sizing analysis
" Stress analysis using hand analysis calculation methods
" Concept development for least weight designs

Candidate must have proficiency in extracting internal loads from finite element coarse grid models and applying those loads for use in static strength and F&DT analysis. Tools utilized may include CATIA, MSC PATRAN / NASTRAN, TMP SLIM and Vision, and a variety of other software applications related to airframe structural analysis and design. Tools for fatigue and damage tolerance analysis include NASGRO, Mechanica, StressCheck and a variety of other software applications related to airframe structural analysis and design. Excel VBA coding experience is desired.

EDUCATION:
Accredited Bachelor's degree Mechanical, Civil or Aerospace Engineering from an accredited university and a minimum of ten years of related experience. A Master's degree is preferred.

WORK HOURS:
Full-Time

 
Job Number: 181980
Job Location: Arlington, TX
Rate: Up to $75.00 DOE
Duration: 6+ Months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Technical Writer

Description:
Flight Technical Writer (L3) 

Location: Shelton, CT



Summary/Objective



Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring flight manuals (i.e., Operator’s manuals and associated Checklists).  This position is in support of contracted technical manual revision services and the creation of new publications.



Areas of Responsibility/Essential Functions



Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft flight publications.
Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft flight publications
Research, writing, and development of portions of aircraft flight publications according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature. Judgment required compiling and selecting technical data for text and illustrations
Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of  aircraft flight publications
Provide frequent status to supervision
Meet established internal and external delivery milestones
Interface with engineers and pilots over the content and review of the publications when required
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.


Competencies



Technical Skills, Knowledge, and Abilities



Ability to write flight procedures from engineering drawings, specifications, performance data, or other similar literature
Ability to write operator procedures for aircraft with integrated avionics suites (i.e., “glass cockpits”)
Familiarity with the operation of aircraft systems
Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
Ability to read and interpret original equipment manufacturer (OEM) manuals
Ability to read and interpret military and commercial specification and standards
Strong analytical and complex problem solving skills
Ability to self-edit written and graphical work
Proficient with desktop publishing using content management software
Proficient with SGML/XML structured document authoring such as EpicEditor or equivalent
Proficient with various research (i.e., customer-specific) applications for technical issues
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
Preferred, but not required:
Military and/or civilian pilot license
Military and/or civilian flight experience
Experience with rotary wing aircraft
A&P mechanic’s license, or equivalent military experience in aircraft maintenance
Ability to use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software


               Interpersonal and Communication Skills



Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
Ability to work collaboratively with others
Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
Ability to demonstrate initiative and be self-motivated
Organizational skills
Time management skills
Detail orientation
Task and goal-orientation
Quality-driven
Responsive and time-sensitive to customer’s delivery schedule
Strong, customer-focused work ethic and positive attitude
Ability to mentor less experienced and knowledgeable writers on the team


Work Experience



Minimum 2 years technical writing experience



Required Education



Requires advanced knowledge of technical publications writing.  Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor’s degree, or equivalent trade experience


Supervisory Responsibility



This position has no supervisory responsibilities.



Work Authorization/Security Clearance



Work authorization: Must be a U.S. person with the ability to work in the U.S.
Security clearance: Required for some assignments at Top Secret level


Work Environment



This position operates in a professional office environment.
This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.


Travel



Limited travel maybe required to support validations.





Additional Eligibility Qualifications



None



Special Demands



None



Other Duties



Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice due to business needs.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57052
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 09/30/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial / Manufacturing Engineer (Elevator Industry)

Description:
The candidate will:
• Manage high complexity design and planning of layout for assembly and materials handling
• Adapt machines or equipment design to factory and production conditions.
• Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance

They will be responsible for designing and improving existing material flow process within manufacturing to meet the ever-increasing performance demands.

The primary responsibilities of the position are as follows:
• Lead Work Cell design initiatives to support customer demand by implementing lean material flow throughout value stream
• Support automation initiatives by developing smart robotic fixtures and conveyors while maintaining safe work environments to reduce ergonomic risks and increase efficiency
• Support and develop smart manufacturing applications to ensure quality and repeatability within various manufacturing processes
• Support Continuous improvement and expand the use of ACE tools.
• In depth knowledge of sheet metal fabrication, electronic wiring, and testing processes
 
Job Number: 1910107197
Job Location: Florence, SC
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1910100719
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

Industrial Engineer

Description:
Industrial Engineer

Palmdale, CA
$75/hr
14 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.
 
Job Number: 11593
Job Location: Palmdale, CA
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
We have an outstanding Contract position for an Industrial Engineer to join a stable Fortune 500 company located in Anniston, AL.

Job Responsibilities:
Support production line implementation
Lineside material staging plan development
Sub-assembly opportunity identification and time studies.
Basic Hiring Criteria:
Associate or Bachelor's Degree in Industrial, Systems, or Process Engineering
US Citizenship required
Desired Qualifications:
Minimum of two years of verifiable experience in a manufacturing environment
 
Job Number: 37418
Job Location: Anniston, AL
Rate: $24.00 $27.00
Duration: 6 Month +
Input Date: 10/01/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Industrial Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-9739
Responsibilities:
• Lead the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
• Lead the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
• Lead in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
• Lead the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization.
• Manage, define, negotiate, and control the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation).
• Ensure project is completed within budget, and on schedule.
• Lead the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
• Lead the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Qualification:
• Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) combined with approximately 9+ years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9739
Job Location: Berkeley, MO
Input Date: 09/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Industrial Engineer (DOD Secret Clearance)

Description:
PDS Tech is seeking an Industrial Engineer with DOD Clearance in Clearfield, UT
 
This candidate will manage schedules and assembly and have Aerospace assembly experience. 
 
**Candidate must have active secret clearance with last investigation within the last 4.5 years.
 
Candidate will have to obtain SAP Clearance.
 
Top three skills:
  • Shop operating plans
  • Standard hour development/application
  • Capacity/staffing forecasting

 
Job Duties:

  • Industrial Engineering accountability will include, but not be limited to the following:

    • Manufacturing capacity analysis
    • Positional tooling and machine requirements
    • Work measurement / time standards development
    • Production performance metrics and analysis
    • Special studies and projects
    • Staffing models
    • Production readiness assessments
    • Recovery planning
    • Facilities and workplace design
    • Lean Implementation
    • Simulations


Requirements & Qualifications:
  • Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
  • In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
  • Ability to provide and implement technical solutions to advanced problems which require ingenuity and innovation
  • Capable of working with minimal direction, independently determines and develops technical objectives of assignments, and presents work upon completion for high level review
  • Occasionally acts as a leader and understands that erroneous decisions on their part will result in probable delay and failure of organizational objectives
  • Represents the organization as a technical contact, interacts with senior personnel on important technical matters, and helps with coordination between organization
  • Experience implementing Toyota Production System practices (lean) in a production and/or

    business environment

 
Competencies for Success:

  • Ability to work with minimal direction in a dynamic fast paced, changing environment
  • Strong interpersonal skills with ability to interface with an organization at all levels
  • Excellent problem-solving skills
  • Able to deal effectively with stress and conflict
  • Initiative, highly motivated self-starter, adaptable, and high motivation for excellence
  • Ability to multitask and prioritize
  • Excellent organizational and multi-tasking skills
  • Strong attention to detail
  • High energy, results oriented, self-reliant, team player
  • Demonstrated work ethic

 
ACTIVE DOD CLEARANCE
 
Job Number: 1910103063
Job Location: Clearfield, UT
Duration: 4 months
Input Date: 08/14/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jy0QAA&URLSource=cjhunter

Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/31/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer (Secret Clearance)

Description:
Summary: •ACTIVE DOD Security CLEARANCE
•Manufacturing capacity analysis
•Positional tooling and machine requirements
•Work measurement / time standards development
•Production performance metrics and analysis
•Special studies and projects
•Staffing models
•Production readiness assessments
•Recovery planning
•Facilities and workplace design
•Lean Implementation
•Simulations

Requirements & Qualifications: •Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
•In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
•Ability to provide and implement technical solutions to advanced problems which require ingenuity and innovation
•Capable of working with minimal direction, independently determines and develops technical objectives of assignments, and presents work upon completion for high level review
•Occasionally acts as a leader and understands that erroneous decisions on their part will result in probable delay and failure of organizational objectives
•Represents the organization as a technical contact, interacts with senior personnel on important technical matters, and helps with coordination between organization
•Experience implementing Toyota Production System practices (lean) in a production and/or business environment
 
Job Number: 1910103063
Job Location: Clearfield, UT
Per Diem: split
Overtime: possible
Duration: 4 months
Start Date: ASAP
Input Date: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Industrial Engineer - Clearance CA

Description:
166412 Job Title: Industrial Engineer

Work Site Address : Palmdale, CA 93599
Job Number: 2070-1
Max Pay Rate: $75.00/hr
Start Date: 10/14/2019
End Date: 12/10/2020
Position Type: Contract


Job Summary:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.

May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Lean Manufacturing No 4
Areas of Expertise Project Scheduling No 7
Soft Skills Interpersonal Skills No 7
Software Skills MS Office - Intermediate Level No 4
Technical Skills Data Analysis No 6
Technical Skills Scheduling No 7
Technical Skills Trend Analysis No 3

Qty 4 positions
 
Job Number: JE-2070-1S6
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 15 months
Input Date: 10/03/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Industrial Engineer 3

Location: Everett, WA
Duration: 6 Months

Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg
 
Job Number: 19-12733
Job Location: Everett, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 09/27/19
Input Date: 09/16/2019
Last Updated: 09/26/2019
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Industrial Engineer 3

Description:
Chipton-Ross is seeking 7 Industrial Engineer 3's for openings in Everett, WA.

RESPONSIBILITIES:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 2:00 PM
 
Job Number: 181667
Job Location: Everett, WA
Rate: $DOE
Duration: 6 Months
Input Date: 09/16/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration:12 Months

Job Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13283
Job Location: Berkeley,, MO
Per Diem: available
Input Date: 10/08/2019
Last Updated: 10/28/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

Industrial Engineer 4

Description:
Chipton-Ross is seeking an Industrial Engineer 4 for an opportunity in Berkeley, MO

RESPONSIBILITIES:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

REQUIRED EXPERIENCE:
Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
0700-0330PM
 
Job Number: 181946
Job Location: Berkeley, MO
Rate: $DOE
Duration: 12 months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer(Level 4)

Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics.
Preferred skills: Aurora and/or Simio
 
Job Number: IE_MO
Job Location: Berkeley, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 10/02/2019
Last Updated: 10/07/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Industrial Engineer- Multiple locations

Description:
Industrial Engineer

Location: Everett, WA & Berkeley, MO (Level 2, 3, 4)
Duration: 6+ months

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a master’s degree with experience in an engineering classification. Required: Bachelor or master’s degree from an accredited course of study, in engineering, com

Skill Code:
D26-Mfg Industrial Engrg.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: asap
Input Date: 09/27/2019
Last Updated: 11/11/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineers - Many Needed

Description:
Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO- Industrial
Job Location: St. Louis, MO
Rate: $55.00-$58.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Everett, WA
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Berkeley, MO
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Renton, WA
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Instrumentation/Control Engineer

Description:
Selected individual will be responsible for performing all aspects of instrumentation and process control engineering and design in support of industrial clients.  Individual must be able to make independent decisions on engineering design challenges and methods.   Provide instrumentation specification, controls systems installation, and equipment integration design as part of a project team. Gain familiarity with the client's expectations, scope, budget, and schedule for assigned tasks. Recognize and communicate scope and design changes promptly. Provide on-site assistance during construction and start-up. Coordinate work activities with other staff members and the discipline lead to ensure total project delivery success.   Development of project specifications and scope documents, project cost estimates, and system design documentation.   Produce instrument spec sheets, instrument indexes, loop diagrams and wiring schematics, device location layouts, communication layouts, wire/cable/conduit schedules. Produce installation details, control system architectures, rack room layouts, functional specifications, configuration and tuning settings, connection diagrams, I/O rack and control panel layouts. Collaboration with OEMs and Vendors in specification adherence, device and system bidding and purchasing, design information management and controls interface between equipment. 
 
A minimum of 10 years of related engineering experience required. BS in Electrical or Process Controls Engineering required. Experience in the Pulp/Paper & Tissue, Food & Beverage, Consumer Products, Chemical, Oil &Gas or Mining industries is highly desired.  General working knowledge of instrumentation and process control/DCS systems essential. DCS system and HMI configuration and programming experience preferred. Field support (construction, installation, pre start-up inspection and operational testing) to meet functional specifications, recognized codes and standards, and customer requirements.  Must be adept at maintaining effective and positive relationships with engineering management, office leaders, project managers, clients, OEMs, and vendors. PE registration is desirable.
 
 
Job Number: 1910105735
Job Location: Appleton, WI
Duration: 6 months
Input Date: 08/26/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Timothy Glapa
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GXPuQAO&URLSource=cjhunter

Logistics Sales Manager

Description:
PDS Tech Inc. is seeking a Logistics Sales Manager in Atlanta, GA.







Description
 You will contribute to the development and execution of sales plans that support company growth and profitability objectives.
Essential functions include
- Prepare and conduct customer visits, calls and presentations.
- Promote Logistics Services
- Develop spot and regular opportunities with existing and new customers,
- Provide technical support and guidance at key stages of a Proposal
- Coordinate and execute proposals
- Develop logistics concepts and technical solutions for Logistics Services and calculation of resource
requirements and structures
- Source, research and collate logistics information of specific interest to Logistics Services, such as
market intelligence/trends, appropriate standards, typical logistics concepts
Your performance will be measured through
- Profit and Turnover (through realized price / claims negotiations),
- Customer Satisfaction (VOC) - delivery performance and organization responsiveness.















Education
First or Masters level Degree in Logistics, Supply Chain, Industrial Engineering or similar.
At least 6 years’ experience in logistics and supply chain operations and solutions engineering
management
Skills: Presentable with good interpersonal and communication, Presenting and Influencing Skills.
Personal Traits: Self-motivated with a positive attitude, Strong drive, Ability to work in a start-up
environment. Having possess sound business sense with an eye for opportunities and development in
the logistics domain.
Fluent in French is a plus.
Travel max 50-75%.








 
Job Number: 1910101093
Job Location: Atlanta, GA
Duration: 1 months
Input Date: 04/17/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Burke
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dlbQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
MRB Engineer

Location: Milledgeville, GA

12+ month contract

Call Laura Leszek at 765-427-4721 if you are interested after reviewing the details!

Our client has an immediate opening for an Aircraft Structural Liaison Engineer with 15+ years of experience to review and provide dispositions to non-conforming composite and metallic detail part and assembly withholding tags. This role will be responsible for Boeing Commercial structure and/or systems repair creation therefore familiarity with Aerospace Material Review Board processing and Boeing D-13709-4 'Requirements of Obtaining Material Review Board Authority by Boeing Subcontractors' specifications is a must and should be capable of conveying engineering dispositions part/assembly meeting design intent. 

Responsibilities

Provide MRB Engineering Support to Operations to address issues occurring during the fabrication of aircraft and/or aircraft components in support of the Boeing programs.
Liaison Engineering functions to include investigation of mfg. issues, design of repairs, engineering support to manufacturing for dwg/spec interpretation, coordinating efforts across a multiple functional organization, such as Planning, Tooling, Stress, M&P, Materiel, and Manufacturing.
Coordinates with other engineering organizations to ensure that repairs meet customer and contractual requirements. 
Provides technical assistance and direction to team members as required.
Determines and develops own approach to solutions within schedule and cost objectives while working under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources.
Frequent inter-organizational and outside customer contacts.
Represents the organization in providing solutions to difficult technical issues associated with specific projects.
Qualifications

Successful candidates typically possess

BS Engineering (Aerospace, Mechanical, or Civil Engineering) from an accredited program recognized by the Washington Accord
15-20 years experience of Aerospace Engineering
Prior Boeing Commercial MRB Liaison Signature Authority with successful completion of Boeing MRB Structural Repair Analysis Course, or equivalent a plus.
Strong interpersonal skills with ability to interface with customers at all levels 
Exceptional time management and organization skills
Strong analytical skills


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57254
Job Location: Milledgeville, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/01/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
Nesco Resource has a great opportunity for a Maintenance Technician in the Naugatuck, CT area.The ideal candidate will be a self starter who works well with others in a diverse and fast paced environment..



Primary Responsibilities:



• Repair and maintain all machinery

• Perform preventative maintenance on all equipment

• Ensure that an appropriate in-house supply of parts is available

• Examine and maintains protective guards and other safety devices on all equipment and makes adjustments as necessary

• Perform general maintenance of all facility equipment

• Enter work order, work log, and parts information into the computer system

• Assist where needed in the facility

• Repair and maintain machinery, plumbing systems, sprinkler systems, air compressor and dryer equipment, and pneumatics

• Perform general construction work 

• Interface with vendors as required

• Operate Electrical testing equipment

• Other duties as assigned by lead or supervisor



Qualifications

Basic:



• High School education or equivalent

• Experience in forklift maintenance, conveyor maintenance or a related field

• Mechanical, Electrical or Electro mechanical aptitude

• Ability to weld

• Proven computer literate

• Ability to work with AC voltage 

• Ability to perform maintenance on Industrial Batteries, including watering, washing, testing and repair

• Ability to lift, push or pull items weighing 70 pounds to 100 pounds

• Knowledge of hydraulics, electrical and pneumatics



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38457
Job Location: Naugatuck, CT
Rate: 22.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-25 00:00:00.0
Start Date: 2019-09-23 00:00:00.0
Input Date: 09/16/2019
Last Updated: 10/31/2019
Firm Name: NESCO RESOURCE
Attention: Belle Rivera
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
6 month W2 contract
PART TIME - 30 HOURS PER WEEK
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 20+ years of experience required.

*Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11657
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:

Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required. *

Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11562
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Manager

Description:
Nesco Resource is seeking a Manufacturing Manager of Facilities and Maintenance will have responsibility for facilities repair and maintenance and the supervision of employees in the Maintenance Department. While maintaining the facility, he or she will comply with all environmental, health and safety regulations. This position reports directly to the VP of Operations.



Location: Saginaw, Michigan

 

Job Descriptions:  




  • Comply with environmental, health and safety laws and regulations

  • Act as backup to the EH&S Manager 

  • Supervise, direct, schedule work and develop employees in the Maintenance Department

  • Hold employees accountable for quality and quantity of work

  • Develop training for employees

  • Plan and execute a preventive maintenance program

  • Conduct maintenance audits throughout the facility

  • Travel as necessary, including internationally

  • Work with all levels of internal personnel to achieve goals

  • Work with operations management to schedule machine and building maintenance and repair activities

  • Abide by the collective bargaining agreement, upholding contractual and work rules

  • Oversee all facility contracts together with the Purchasing Dept. for building and property maintenance and repair

  • Negotiate contracts with vendors and service providers

  • Develop and sustain positive vendor and service provider relationships

  • Achieve cost savings targets

  • Work a flexible schedule to include weekends and call-ins

  • Utilize problem solving methods to identify root cause and implement meaningful and effective corrective measures

  • Participate in planning and executing lean manufacturing events in the facility

  • Due to project planning and emergency situations, must be able to work a flexible schedule, including weekends, call-ins and extended hours. 


 Job Requirements:


  • BS degree preferred

  • Minimum 3 years’ experience in facilities management

  • Working knowledge of plant power systems, including, but not limited to primary switch gear, secondary switch gear and distribution system and plant systems; i.e. water towers, air compressors, heat treating, hydromation, waste treatment and process boiler, as well as the respective controllers

  • Experience with precision machining, industrial automation and CNC machines

  • Experience supervising in a unionized environment

  • Experience with the maintenance and repair of machine tools

  • Must be able to perform the physical requirements of the job including (but not limited to) walking, standing, bending, stooping, twisting, turning, reaching, grasping, ladder climbing, stair climbing, reading, speaking and lifting up to 50 pounds.

  • Excellent communication and presentation skills

  • Self-motivated team player

  • Hands on approach, willing to “roll up the sleeves”

  • Demonstrated leadership ability

  • Due to our status as a defense contractor, must be a US  Citizen


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-26802
Job Location: Saginaw, MI
Rate: 75000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-28 00:00:00.0
Input Date: 08/12/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (7-10+ yrs exp)

Description:
This position will contribute to the design of precision optical systems and tooling.
Responsibilities include opto-mechanical and electro-mechanical design of aerospace flight components. Responsibilities include providing solutions to a variety of complex technical problems as assigned.

Role and Responsibilities:
Lead and direct opto-mechanical engineering on multiple projects through all phases of innovation and development
• Assume primary responsibility for the design, analysis, and documentation of opto-mechanical systems; these systems are typically deployed in an industrial or aerospace environment and may have significant electronic content
• Direct the activities of other Engineers and provide technical direction to other stakeholders including Manufacturing, Purchasing, Quality as necessary
• Provide technical content for proposals, estimate and track mechanical design costs, create schedule estimates, and make presentations to customers and company management.
• Create system models, perform required analysis, and create detailed part and assembly drawings and associated parts lists, in accordance with ANSI Y14.5 and inhouse drawing standards.

Basic Qualifications:
• US Citizenship is required.
• This position requires a Bachelor’s degree in the appropriate discipline and 7 years of relevant experience or an advanced degree in the appropriate discipline and 5 years of experience. In the absence of a degree 11 years of appropriate experience is required

Required Skills:
• Have a thorough understanding of Mechanical Engineering principles, theories, and applications
• Demonstrates a solid understanding of optics and opto-mechanical best practices and basic understanding of the other engineering disciplines
• Ability to use hand calculations for preliminary sizing and for FEA validation
• Able to analyze, problem solve, multi-task and meet deadlines
• Able to clearly describe results in oral presentations and written reports
• Results-oriented with strong personal drive and personal ownership in meeting commitments
• Excellent organizational skills and attention to detail.
• Operate independently with limited supervision
• Impeccable ethics; maintains a positive and professional working environment
• Strong CAD solid modeling experience with ANSI Y14.5 knowledge
• Proficient in CREO (Pro-E) and PDMLink or similar CAD tool

Preferred Skills:
• Advanced technical degree
• Finite Element Analysis using NASTRAN
 
Job Number: 1910107083
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 10/04/2019
Last Updated: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Production Painter I

Description:
PDS is seeking a Production Painter I  for an open position in Savannah, GA.


Position Purpose:



Under supervision, effectively prepare and paint major sub-assemblies and other parts of aircraft in production made according to specifications and schedule requirements. 


Principal Duties and Responsibilities:

Essential Functions:1. Mix paints, primers, etc. according to specifications. 2. Paint major assemblies (including metal, fiberglass and composite material), detail parts, and apparatus related to ground support. 3. Strip paint and prepares surfaces as required. 4. Perform miscellaneous paint operations and applies decals. 5. Maintain a neat and orderly work area, supports the company 5S and Lean Initiative Programs and complies with all safety regulations. 6. Demonstrate Manufacturing competencies in the Employee Effectiveness Review. 

Additional Functions: 1. Perform other duties as assigned. 

 



Education and Experience Requirements:
High School diploma/GED.
Requires knowledge of tools, equipment, and materials used in painting trade and methods of mixing paint colors.
Two (2) years painting/paint preparation experience

Unique Skills:



Industrial painting experience.



Other Requirements:
1. Proficiency in current personal computer based software.
2. Must be able to meet the physical requirements of the position.
3. Must be able to work any shift.


 
Job Number: 1910106701
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 09/20/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kendra Agnew
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJOjQAM&URLSource=cjhunter

Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 08/21/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Project Engineer

Description:

You will oversee project sourcing, planning, and delivery of a growing project pipeline, primarily in North America and Europe.
 
THE ROLE:



  • Execute on day-to-day delivery of ongoing project studies, manage engineering consultants, and coordinate input from engineering and commercial teams. 
  • Lead multi-disciplinary workstreams (technical, business, marketing) to drive progress and ensure alignment with engineering and commercial objectives. 
  • Ensure overall quality, cost and schedule of project studies. 
  • Develop and maintain relationships with project sponsors / customers, and other stakeholders as necessary. 
  • Form strategic partnerships with engineering firms to jointly submit project proposals and responses to government inquiries. 
  • Monitor open government inquiries and RFPs and manage strategic pursuits in the US and EU. 
  • Travel within North America and Europe on an as-needed basis, primarily for government meetings and outreach events.


 
THE CANDIDATE:

  • Strong interpersonal skills and enthusiastic leader. 
  • Strategically-minded thinker with strong decision-making skills. 
  • Able to communicate effectively with both technical and non-technical audiences, including clients, external consultants, contractors, and regulatory agencies. 
  • Flexible, adaptable and able to work under limited direction in a fast-paced environment. 
  • Able to consistently meet the required quality standards and agreed deadlines. 
  • Comfortable working in a multi-disciplinary team. 
  • Highly self-motivated and eager to take on new challenges.


 
MINIMUM REQUIRED EXPERIENCE: 

  • BS in Civil, Structural or Transportation Engineering. 
  • Manager-level experience in the development and execution of large (greater than $500 Million contract value) transportation infrastructure projects. 
  • Demonstrated experience in both technical and commercial aspects of pre-procurement project delivery, including feasibility and EIA/EIS studies. 
  • Well-versed in domestic and international transportation design codes and regulatory standards, including AASHTO, FHWA, FRA and Eurocode. 
  • Strong understanding of construction industry, including procurement methods, contract risk allocation, and project cost and schedule drivers. 
  • Demonstrated experience with non-traditional project delivery methodologies, including public-private partnerships.


 
PREFERRED EXPERIENCE:

  •  PE and/or PMP preferred.



 
Job Number: 1910106418
Job Location: Los Angeles, CA
Duration: 4 months
Input Date: 09/11/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fHvWQAU&URLSource=cjhunter

Project Manager II

Description:
Chipton-Ross is seeking a Project Manager for an opening in Carlsbad, CA.

RESPONSIBILITIES:
This project management role will provide order support for the custom orders placed in a large multi-mix manufacturing facility. They will manage order execution in coordination with procurement and planning, monitoring all phases of the supply chain. A successful candidate will succeed if they have strong communication skills and can relay order progress details to external and internal customers. Common tasks outside of cross functional coordination, may include order entry in Oracle E1 ERP system, Infrastructure and technical documentation creation and control, deviation and non-conforming material investigation and reporting, and change management. The role will be highly cross functional working with a local team of 8 project managers, and interfacing with commercial managers, and customers from all over the world. Initial technology will be focused on Next Generation Sequencing, but can cross into Molecular, Cellular Biology, Protein and Cell analysis, Antibodies and Immuno-assays and Sample Prep.
Represent Manufacturing and Operations for new commercial opportunities associated with custom products and sizes.
Oversee the activities of all operations aspects involved in manufacturing of custom orders.
Develop and maintain detailed plans and schedules for all tasks owned by Manufacturing/Operations.
Prepare written work instructions and manufacturing product documentation.
Implement developmental outputs into product infrastructure, SKU creation, manufacturing process, documentation and procedures.
Direct extended team activities.
Effective and consistent communication of progress and challenges to all project stakeholders including, but not limited to, the customer, the project core team, functional department managers/supervisors, site leaders and extended team members.
Manage multiple projects using project management best practices.
Manage communication and deliverables for local site projects.
Asses feasibility and cost for new opportunities as they arise
Other duties as assigned.

REQUIRED EXPERIENCE:
Verbal and written fluency in English.
Education and experience in chemistry, biochemistry, assay development and/or light industrial process applications is required.
Preferable Skills and Attributes:
Understanding of ISO 9001:2015
Demonstrated documentation and communication skills.
Proficient use of MSOffice, MS Project, MS Teams and Visio.
Strong project management skills and knowledge.
Ability to solve multilevel problems quickly and easily.
Effective interdepartmental interactions.
Continually looking at ways to improve processes.
Personable, perpetuating a can-do positive attitude.
Experience with E1 and Agile systems.

EDUCATION:
Accredited Bachelor's degree (B.A., B.S., etc.) from four-year college or university and 2+ years post undergraduate experience in developing reagents for regulated/non-regulated markets, or 2+ years post undergraduate experience in a chemistry/biotechnology manufacturing environment, producing/developing products for the biotech/pharma/molecular diagnostic markets. M.S and 1+ years post undergraduate experience in a biotechnology manufacturing environment manufacturing/developing products for regulated/non-regulated markets.

WORK HOURS:
1st Shift
Full-Time

 
Job Number: 182135
Job Location: Carlsbad, CA
Rate: Up to $30.00 DOE
Duration: 6 Months
Input Date: 10/03/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Tyler Harrell
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tharrell@chiptonross.com
Website: www.chiptonross.com

Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC\'s.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Senior Industrial Controls Engineer

Description:
JSG is hiring a Senior Controls Engineer in Monrovia CA

Responsibilities:

Ability to analyze complex data and present to management and engineers in understandable discussions
This requires strong technical and social aptitude for written and verbal communication
Identify obstructions and issues early to Project Managers and Management
Plan with System Engineering Manager and V.P. of Operations and Systems methods for long term Systems Group sales growth and cost reductions with improved quality
Complete pre-sale conceptual design, schedule, and cost estimation of software, electrical, and mechanical for semi-automated and fully automated industrial processing workstations developed from communication with customers
Implement HMI and GUI integration for system operation, motion control, laser control, resistance welder control, machine vision (Cognex), data collection and analysis, file management, and networking capabilities
Develop Structured, re-useable low-level and high-level motion control system code for Delta-Tau, Aerotech, Allen Bradley, and similar motion systems implementing controls and I/O functions.
This requires a strong background in motion control and S.T.E.M.
Supply mechanical design suggestions for a robust operation to mechanical engineers for detailed design implementation
Create Software Design Specifications (SDS) and Hardware Design Specifications (HDS) based on User Requirements Specifications (URS), purchase orders, quotations, sales orders, and any additional compliance documents
Build, develop, and evaluate prototypes for automation and control systems based on detailed SDS and HDS
Develop laser optics path and vibration isolation designs with input from Applications and Advanced Technology Departments and customer application results
Directly responsible for ensuring continuous Systems robotics, vision, motion control, and pick & place improvements
Experienced in kaizen methods applied to engineering and controls is a plus
Education/Experience:

Knowledgeable in software design tools and environments including .NET, Visual C++, C#, current Experience in C# is a plus. Fundamental background in Software Engineering.
Four-year degree in computer science, engineering, physics, or related discipline required. Masters Electrical engineering, Automation or Control Engineering preferred.
8 years+ experience in designing custom motion control, HMI, robotics, pick & place, and hardware for automated control systems.
3 years+ experience in designing custom machine vision applications preferred.
Experience with lasers and optics helpful
Electrical engineering design experience; Solidworks Electrical is a plus.
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion, longer-term projects.
Preferred applicants will have experience in DLL generation for selected software-controllable systems components
Ability to travel occasionally
 
Job Number: 375699
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/31/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 10/31/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Jamestown ND
Rate: $68.00/hr
Duration: 6 months
Work Shift: First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Primary Responsibilities
o Develops, coordinates and conducts complex tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Liaises closely with other project team members in the planning, design, development, and utilization of electronic data processing systems for product and commercials software to ensure smooth operations on software engineering activities.
o Recommends changes in the selection and application of software production components to improve and develop software engineering activities.
o Designs and implements build procedures that are used to support hardware and software product development and function.
o Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
o Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
o Ensures hardware and software standards are met.
o Designs and implements build procedures that are used to support hardware and software product development and use.
o May develop software configuration standards for company-wide use.
o May train software developers in the use of configuration management tools and the implementation of software quality standards

Basic Qualifications
o Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and 7 years of prior relevant experience or an Advanced degree and 5 years of prior or relevant experience
o Embedded systems software development experience utilizing C or C++ (4+ years)
o Motivated self-starter with strong analytical skills
o Experience with real-time embedded applications
o Experience in developing products for civil or military applications meeting industry or government security or safety standards
o Strong written and verbal communications skills and the ability to work well with others in a professional team environment
o Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules Preferred Qualifications
o TCP/IP network applications development experience (4+ years)
o UML experience (2+ years)
o Familiarity with ARINC 664 protocol (2+years)
o Experience following a well-defined software development process, e.g. DO-178 (4+ years) Education & Certifications
o Bachelor’s Degree in engineering or Technical discipline and 7 years of relevant experience OR
o Advanced Degree in engineering or Technical discipline and 5 years of relevant experience OR
o In the absence of a degree, 11 years of relevant experience is required

Candidate meeting requirements of an advance position would be considered depending on aerospace experience.
 
Job Number: 11304
Job Location: Jamestown, ND
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 08/09/2019
Last Updated: 10/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Sr. Structural Engineer

Description:
Position Summary

At Poyry our Structural Engineers are responsible for the structural design for new structures as well as existing structural upgrades. Our engineers design unique and challenging projects, and perform investigations to make expert recommendations to clients for various purposes.  Activities include site investigations, structural engineering and drafting for both front end planning and the detailed engineering phase for multi-discipline projects.


 
  • Responsible for the design of structural systems and components for a variety of commercial and industrial facility types; ensuring the designs conform to recognized codes and standards, as well as client requirements.
  • Duties will include structural engineering, drafting, 3D modeling, structural details, analysis, and design.
  • Must possess working knowledge of current industry codes and standards, and have experience with the latest engineering analysis software and techniques.
  • A strong communicator across disciplines and project teams
  • Visits to project sites to collect data and to observe construction progress

Job Qualifications

 
  • Bachelor’s degree in Civil/Structural Engineering
  • Minimum 10 years of experience in Structural Engineering
  • Knowledge of steel, concrete, timber design and familiarity with applicable codes (IBC, ASCE 7, ACI, AISC, etc.)
  • Preferred software knowledge and requirements include AutoCAD, Revit, BIM, RISA 3D, Word and Excel
  • Excellent written and verbal communication skills necessary in order to effectively communicate with clients and employees
  • PE preferred, SE is a plus

 
Job Number: 1910106539
Job Location: Appleton, WI
Duration: 12 months
Input Date: 09/12/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Timothy Glapa
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fIouQAE&URLSource=cjhunter

Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 09/17/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Sr. Structural Revit Designer

Description:
Nesco Resource is partnering with an engineering firm in its search for contract Sr. Structural Revit Designers to reinforce their team of skilled multidiscipline designers and engineers. These positions start out on a contract basis with the potential for permanent hire. Great exposure to global clientele/projects.



The ideal candidate is committed to producing high quality deliverables on varied projects for advanced technology clients. Our client\'s team produces exceptional solutions to complex problems through constant coordination.



As an integral part of the client\'s team, you will begin by completing specific design assignments under the guidance of a senior designer or structural engineer. Additional responsibilities will be provided based on performance.



Primary duties and responsibilities:

  • Produces organized structural plans and details that support lead discipline systems.

  • Assist lead structural engineer in development and coordination of structural support scope.

  • Models or drafts design into completed working details and drawings through interpretation of the design and application of design fundamentals.

  • Develops understanding of multifaceted client to better solve unique conditions.

  • Applies creative problem solving skills to see beyond standard answers.

  • Consults with supervisor to screen assignments for unusual or difficult problems and selects appropriate methods and techniques to apply.

  • Exercises judgment for some aspects of design, but receives supervision and direct input on new aspects of assignment.

  • Communicates with supervisor concerning progress or problems in an assigned task.


Requirements:


  • Structural or Civil Associate\'s degree or any related engineering technology.

  • 6+ years of structural design experience required.

  • Experience with Revit required.

  • Experience with AutoCAD beneficial.

  • Self-motivation to clarify scope of work, anticipate issues, propose options and find cost-effective or schedule-driven solutions.

  • Strong problem solving skills and flexibility in a fast-paced environment.

  • Ability to provide clear direction and expectations to designers and contractors.

  • Practical field experience with active involvement in construction areas preferred.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-35440
Job Location: Hillsboro, OR
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 08/26/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Staff Estimator

Description:
PDS Tech, Inc. is seeking a Staff Estimator, in Kansas City, MO.

Summary:
  • Familiarity with an Estimating Software/System – This could be entry level knowledge, but they need some awareness of how to estimate on a computer based system such a RS Means, WinEst/ProEst, Trimble Accubid or Enterprise, Quotesoft, etc. (using MS Excel is not a high enough level for what we do). 
  • Experience Reading/Interpreting Plans & Specs – Work experience or Plans/Specs college courses are both sufficient. Indication should be that the experience has been broad enough to be exposed to various types of plans (i.e. piping, electrical, architectural). 
  • Ability to Conceptualize from Fragments of Information – This would most likely be apparent in an interview rather than on a resume. The estimator would need to be able to understand that items such as “250’ of ¾” conduit” includes field bends, box connectors, and other fittings without it being specifically listed on a report.


 
Requirements:
  • US Citizen able to obtain and maintain a Department of Energy Security Clearance is required.
  • Prefer 2+ years estimating experience for complex projects related to industrial / manufacturing facilities.
  • Excellent written & verbal communication skills.
  • Strong analytical and problem solving skills.
  • Conduct field work throughout the facility to support estimate development.
  • Capable of devising new approaches to problems encountered.
  • Must be proficient in the use of basic computer software (i.e. Microsoft Word, Excel, PowerPoint, Adobe, Bluebeam). 
  • Position requires minimal travel.


 
 
Job Number: 1910106692
Job Location: KS City, MO
Duration: 6 months
Input Date: 09/11/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJNgQAM&URLSource=cjhunter

Staff Mechanical Engineer

Description:
PDS Tech, Inc. is seeking a Staff Mechanical Engineer in Westford, MA.

This position will contribute to the design of precision optical systems and tooling.
 
Responsibilities include opto-mechanical and electro-mechanical design of aerospace flight components. Responsibilities include providing solutions to a variety of complex technical problems as assigned.
 
Role and Responsibilities: 
Lead and direct opto-mechanical engineering on multiple projects through all phases of innovation and development

  • Assume primary responsibility for the design, analysis, and documentation of opto-mechanical systems; these systems are typically deployed in an industrial or aerospace environment and may have significant electronic content
  • Direct the activities of other Engineers and provide technical direction to other stakeholders including Manufacturing, Purchasing, Quality as necessary
  • Provide technical content for proposals, estimate and track mechanical design costs, create schedule estimates, and make presentations to customers and company management.
  • Create system models, perform required analysis, and create detailed part and assembly drawings and associated parts lists, in accordance with ANSI Y14.5 and inhouse drawing standards.


 
Basic Qualifications:
  • US Citizenship is required.
  • This position requires a Bachelor’s degree in the appropriate discipline and 7 years of relevant experience or an advanced degree in the appropriate discipline and 5 years of experience. In the absence of a degree 11 years of appropriate experience is required
     
    Required Skills:


  • Have a thorough understanding of Mechanical Engineering principles, theories, and applications
  • Demonstrates a solid understanding of optics and opto-mechanical best practices and basic understanding of the other engineering disciplines
  • Ability to use hand calculations for preliminary sizing and for FEA validation
  • Able to analyze, problem solve, multi-task and meet deadlines
  • Able to clearly describe results in oral presentations and written reports
  • Results-oriented with strong personal drive and personal ownership in meeting commitments
  • Excellent organizational skills and attention to detail.
  • Operate independently with limited supervision
  • Impeccable ethics; maintains a positive and professional working environment
  • Strong CAD solid modeling experience with ANSI Y14.5 knowledge
  • Proficient in CREO (Pro-E) and PDMLink or similar CAD tool
     
    Preferred Skills:


  • Advanced technical degree
  • Finite Element Analysis using NASTRAN

 
Job Number: 1910107083
Job Location: Westford, MA
Duration: 24 months
Input Date: 10/01/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fL71QAE&URLSource=cjhunter

Structural Analysis Engineer

Description:
Chipton-Ross is seeking a Structural Analysis Engineer for an opening in Arlington, TX.

RESPONSIBILITIES:
Structural analysis tasks in support of Airframe Structural Test and Certification. Tasks can include:
Perform stress analysis tasks related to trade studies to determine best design approach to meet airframe design requirements.
Provide stress analysis support for design layouts, including determination of optimum loads paths, material and hardware selections and least weight / low cost designs.
Provide stress sizing and analysis for airframe preliminary design.
Provide sizing updates and final analysis for detail design releases.
Develop internal loads and loads updates for the above tasks.
Preparation of test requirements, test plans, test reports, internal loads correlation and other analysis and documentation related to structural testing.
Communicate with team members effectively.

REQUIRED EXPERIENCE:
Structural analysis engineer experienced with metallic and composite airframe, or related structures. Provides stress analysis support for new product development from conceptual through detail design. Some knowledge and experience is required in the following areas, with substantial experience and expertise in many of these areas:
Airframe structural criteria / requirements
Trade studies
Design layout development to define structural load paths
Internal loads development using various approaches including finite element modeling and analysis
Preliminary and final sizing analysis
Stress analysis sizing using hand analysis calculation methods
Concept development for least weight designs
Stress report preparation
Stress support for manufacturing and change board
Stress support for structural test including coupon, design development, component and full-scale static and fatigue, and flight test
Stress support for damage limits, structural repairs and mods to support repair limits and structural repair manual preparation.

Candidate must have proficiency in extracting internal loads from finite element coarse grid models and applying those loads for use in static strength analysis. Tools utilized may include CATIA, MSC PATRAN / NASTRAN, Hypermesh, Optistruct, TMP SLIM and Vision, and a variety of other software applications related to airframe structural analysis and design. Excel VBA coding experience is desired.

EDUCATION:
Accredited Bachelor's degree Mechanical, Civil or Aerospace Engineering from an accredited university and a minimum of ten years of related experience. A Master's degree is preferred.

WORK HOURS:
Full-Time

 
Job Number: 181979
Job Location: Arlington, TX
Rate: Up to $75.00 DOE
Duration: 6+ Months
Input Date: 09/27/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Structural Analysis Engineer

Description:
Chipton-Ross is seeking a Structural Analysis Engineer for an opportunity in Marietta, GA

RESPONSIBILITIES:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.

REQUIRED EXPERIENCE:
Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings.
Finite Element Analysis (FEA) 4-6 years preferred

EDUCATION:
Bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 181488
Job Location: Marietta, GA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 09/05/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/31/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Structural Analysis-Stress

Description:
Chipton-Ross is seeking a Structural Analysis Engineer for an opportunity in Marietta, GA

RESPONSIBILITIES:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

REQUIRED EXPERIENCE:
Finite Element Analysis (FEA) 4-6 years (preferred) & Stress Analysis 6+ years (required)

EDUCATION:
Accredited BS+9-15 YRS or MS+7-13 YRS

WORK HOURS:
9/80

 
Job Number: 180383
Job Location: Marietta, GA
Rate: $DOE
Duration: 12 months
Input Date: 07/15/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/11/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 5 years  recent design engineering experience.
  • Proficient in CATIA V5 required (r24 preferred)
  • Enovia proficiency is required. 
  • Ground up design experience is required 
  • Sikorsky product experience is highly desired 
  • Experience with Team Center a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Minimum 5 years  recent design engineering experience.
  • Proficient in CATIA V5 required (r24 preferred)
  • Enovia proficiency is required. 
  • Ground up design experience is required 
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries. Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1910104459
Job Location: Hazelwood, MO
Duration: 6 months
Input Date: 07/18/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GThAQAW&URLSource=cjhunter

Structural Design Engineer- Secret

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 3 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance, investigation close dat within the last 5 years 
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1910100035
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/27/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYT3QAM&URLSource=cjhunter

Structural Designer

Description:
We are looking for an experienced designer familiar with heavy industrial work.  Our designers are asked to provide preliminary layouts of buildings, equipment supports, foundations, etc. for our engineers to begin the analysis and design. 
 
Buildings:
  • Establish grid lines
  • Prepare preliminary framing plans and elevations
  • Generate sections and details
  • Layout preliminary foundations
  • Generate architectural details
  • Shop drawing review

 
Equipment:

  • Review vendor drawings
  • Generate preliminary support plan
  • Evaluate maintenance requirements for access and monorail placement
  • Preliminary access platform layout

AutoCAD and Revit as our primary design tools.  Experience with both products is a plus. 
Must have some experience with a 2D drafting program and a 3D design program. 
Experience utilizing point clouds is a plus.

Heavy industrial experience is required, pulp and paper experience is preferred.
Candidate must be a good communicator, work well with teams, be motivated and willing to accept challenges. 
We are looking for an individual that can work with little supervision.

 
 
Job Number: 1910106545
Job Location: Kaukauna, WI
Duration: 12 months
Input Date: 09/12/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Timothy Glapa
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fIpYQAU&URLSource=cjhunter

Structural Engineer IV

Description:

PDS Tech is seeking a Structural Engineer (Civil) in Anchorage, AK.
 



Key Accountabilities
• Responsible for the structural design of various structures, equipment and systems for new build, conversion, refurbishment, and upgrades to drilling and production facilities.
• Assists in developing layouts, scopes of work, procurement specifications, vendor expediting, and resolution of engineering issues.
• Responsible for accurate scheduling, budget preparation and control, quality, and safety of designs.
• Coordinates the work of drafters and technicians to ensure that design and quality requirements are met.
• Reviews and approves engineering drawings and calculations in compliance with regulatory rules and ensure adequate standards of safety are incorporated.
• Supports and assists operations and projects staff with technical queries and structural non-conformances as required.
• Assists in the development of fabrication and structural inspection plans.

Required and Preferred Skills and Experience
• Senior level, typically 7-10 years of experience.
• Understands advanced aspects of discipline and is viewed as an expert in a given field.
• Applies broad range of competencies to develop solutions to complex problems. Influences others to achieve objectives.
• Often provides specialized/technical/functional guidance to others within department and/or business asset.

• Knowledge of ASISC, ASCE, and AWS codes
• Familiarity with DOT, ADEC, and SPCC regulations
• Knowledge of welding, metallurgy, and QA/QC methods



Please contact Crystal: cbrenes@pdstech.com
 


Professional Engineer License (PE)Yes  
Bachelor's Degree in Civil EngineerYes  
Fabrication/Construction ExperienceYes  
Regulatory AwarenessYes  
Structural DesignYes  
MS OfficeYes  
Structural Analysis (ANSYS, Abaqus, etc.)Yes                                                       

 
Job Number: 1910107319
Job Location: Anchorage, Ak
Per Diem: No
Duration: 12 months
Input Date: 10/07/2019
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Crystal Brenes
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMUIQA2&URLSource=cjhunter

Structural Revit Designer

Description:
Nesco Resource is partnering with an engineering firm in its search for contract Structural Revit Designers to reinforce their team of skilled multidiscipline designers and engineers. These positions start out on a contract basis with the potential for permanent hire. Great exposure to global clientele/projects.



The ideal candidate is committed to producing high quality deliverables on varied projects for advanced technology clients. Our client\'s team produces exceptional solutions to complex problems through constant coordination.



As an integral part of the client\'s team, you will begin by completing specific design assignments under the guidance of a senior designer or structural engineer. Additional responsibilities will be provided based on performance.



Primary duties and responsibilities:

  • Produces organized structural plans and details that support lead discipline systems.

  • Assist lead structural engineer in development and coordination of structural support scope.

  • Models or drafts design into completed working details and drawings through interpretation of the design and application of design fundamentals.

  • Develops understanding of multifaceted client to better solve unique conditions.

  • Applies creative problem solving skills to see beyond standard answers.

  • Consults with supervisor to screen assignments for unusual or difficult problems and selects appropriate methods and techniques to apply.

  • Exercises judgment for some aspects of design, but receives supervision and direct input on new aspects of assignment.

  • Communicates with supervisor concerning progress or problems in an assigned task.


Requirements:


  • Structural or Civil Associate\'s degree or any related engineering technology.

  • 3-8 years of structural design experience preferred.

  • Experience with Revit required.

  • Experience with AutoCAD beneficial.

  • Self-motivation to clarify scope of work, anticipate issues, propose options and find cost-effective or schedule-driven solutions.

  • Strong problem solving skills and flexibility in a fast-paced environment.

  • Ability to provide clear direction and expectations to designers and contractors.

  • Practical field experience with active involvement in construction areas preferred.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-35434
Job Location: Hillsboro, OR
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 08/26/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/06/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/06/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator CA

Description:
Supply Chain Ops Coordinator (Job Number: 19028585)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 2nd Shift

Target Start Date: Oct 5, 2019

Target End Date: Oct 5, 2020

Pay rate: $20.00 - $23.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo
Work schedule: 5/40 - Second shift


•Maintain schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.


•Compile records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.


•Expedite flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.


•Assist in determining possible and actual shortages may initiate action to correct these deficiencies.


•Use knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.


•Estimate and log production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Deliver stock or inventory to the manufacturing floor and/or supplies to business areas


Basic Qualifications:



•High School Diploma and
2 years additional education and/or related experience.

•Microsoft Office knowledge.


•Strong Excel background.


•Knowledge of SAP/R3 or similar ERP software.


•General understanding of continuous process improvement.


•Must be able to obtain a Secret Clearance.


•Ability to frequently move and position objects weighing up to 40 lbs.


•Must be able to move stock/inventory/materials around the manufacturing floor and various business units.



Preferred Qualifications:




•Bachelors with 3 years related experience.


•Knowledge of manufacturing work flow and MRP systems or similar.


•Ability to work in a fast paced environment.


•Experience in electronics manufacturing is a plus.
 
Job Number: JK-1806ATO
Job Location: El Segundo, CA
Rate: 20-23/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 09/24/2019
Last Updated: 10/22/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer

Description:
US Citizen, US Person, and Foreign National candidates permitted



Job Responsibilities:

Manages systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, system safety analysis, research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes.
Integrates system activities to support the aforementioned tasks.
Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.
Responsible for requirements management and supplier design oversight.
Will be responsible for managing design responsible suppliers to ensure compliance to aerostructures technical requirements while keeping project within allocated cost and schedule.
Requires individual with strong technical skills with experience managing projects with little oversight.


BS in Engineering related field required

**Travel to supplier sites may be required

This position pays in the $40/hour range

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57782
Job Location: Chula Vista, CA
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 09/30/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Systems Engineer

Description:
Systems Engineer

Chula Vista, CA
$40.25/hr
1 year W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION**

Description:
Manages systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, systems analysis for safety of system, systems research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes. Integrates system activities to support the aforementioned tasks. Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional:
Responsible for requirements management and supplier design oversight. Will be responsible for managing design responsible suppliers to ensure compliance to Aerostructures technical requirements while keeping project within allocated cost and schedule. Requires individual with strong technical skills with experience managing projects with little oversight.

Bachelors Degree required
 
Job Number: 11451
Job Location: Chula Vista, CA
Rate: 40.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/10/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Publications Engineer

Description:
Technical Publications Engineer
Location: Chula Vista, CA

Job Summary:  Perform technical writing of aircraft after-market technical documentation.

Qualifications:  Must be able to perform each essential function and have education, skills & experience listed below. 

Recommended Keywords in Resume for Searching :   Technical / Writer / Aircraft OR Aerospace / Arbortext OR Frame Maker

Essential Functions & Responsibilities: 

Create technical content for documents such as SRMs, CMMs, AMMs, EMMs, IPCs, IPLs, Service Bulletins. 
Employ technical writing & publication software to create technical content in Simplified Technical English.
Education:

Absolute MINIMUM of 4 year ABET Bachelor Degree in Aerospace or Mechanical or Civil or Structural Engineering.   
Required Technical Writing Experience:

0-to-10 years of Technical Writing experience in aerospace industry creating content for aerospace technical manuals.  
Highly Preferred but Not Mandatory Experience:

Analytical thinking and problem solving in developing maintenance manuals content.
Knowledge of aerospace Tech Publication standards such as S1000D, ispec & ATA as they relate to maintenance manuals.
Technical Illustrating and the use of sketching tools and or artistic ability to hand sketch is a plus.
Parts list and Parts catalog creation by interrogating engineering data such as assembly drawings & models.
Personal and Interpersonal Skills

Strong interpersonal skills with willingness to ask questions & dig for answers. High degree of collaboration is expected.
Demonstrated ability to multitask with strong task orientation and attention to critical details required.
Ability to work independently, be insightful, resourceful & innovative and willing to do whatever work is assigned.
Great verbal & written communication skills with strong command of English language and Simplified Technical English.
Ability to read & understand 2D drawings, 3D solid models, assemblies and maintenance procedures
Preferred But Not Mandatory Tech Pubs & Software Skills:

Arbortext, Adobe Framemaker & PageMaker, IsoDraw, CORENA, Mark-Up languages: SGML, XML, HTML
MS Word, MS Excel, MS PowerPoint
3DVIA & CATIA (general familiarity) + Familiarity with Team Center + ENOVIA (general familiarity)
Certificates, Licenses, Registrations: None required except diploma or certificate for MIN 2 years technical training.



Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57347
Job Location: Chula Vista, CA
Rate: $35
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 09/24/2019
Last Updated: 10/28/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Technician

Description:
Chipton-Ross is seeking a Technician for an opening in City of Industry, CA.

RESPONSIBILITIES:
Under moderate supervision and working from written and/or verbal instructions including engineering drawings and test procedures, positions, builds, tests, repairs and modifies production mechanical and electronic components and instruments by performing.
" Devises, fabricates, and assembles new or modified mechanical / electro-mechanical, electronic components or assemblies for products such as industrial equipment and machinery, power equipment, servosystems, machine tools, and measuring instruments. May be required to install, troubleshoot, diagnose causes and/or repair products, instruments or equipment or perform routine or preventive maintenance.
" Coordinates and participates in final assembly of unit or system, connecting valves, pumps, hydraulic, mechanical or electrical controls, cabling, tubing, power source, and instruments. May assemble standard components and assemblies.
" Activates controls to apply electrical, hydraulic, pneumatic, or mechanical power.
" Reviews project instructions and drawings to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or rearrangement of parts or subassemblies.
" Sets up and conducts tests of complete units and components under operational conditions to components for functional, operational, environmental, and life conditions to evaluate performance and reliability of prototype or production model or to obtain data for development, standardization, quality control, and/or contract requirements.
" Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and corrects equipment through modification, rebuild or adjustment to meet specifications.
" Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method.
" Ability to work with electrical and mechanical systems as well as test and plumb with cylinder gases and software.

REQUIRED EXPERIENCE:
" Requires a high school diploma and some vocational or technical training and a minimum of 2-5 years of directly related experience, and/or training; or equivalent combination of education and experience.
" Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
" Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to calculate figures and amounts, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
" Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
" To perform this job successfully, an individual should have knowledge computer software including basic use of spreadsheet (MS Excel), word (MS Word), and email (MS Outlook) software. Employee may be tasked with using software such as LabView for collecting and analyzing data.
" Follows all import/export requirements, consulting with facility import/export personnel as required.

Physical and Mental Abilities:
" Ability to understand, remember and apply oral and/or written instructions and be able to communicate well routine information.
" Ability to organize thought and ideas into understandable terminology and prioritize own work schedule on short-term basis
" Ability to apply common sense in performing the job and make decisions which have significant impact on the immediate work unit and monitor impact outside immediate work unit.
" While performing the duties of this position, the employee is required to walk, stand, sit for extended periods.
" Must be able to reach with hands, stoop, bend, kneel, crouch and crawl and be able to lift up 70 lbs.
" Requires clear vision and ability to identify and distinguish colors and dept perception.
" Employee must be able to work around moving mechanical parts in a moderate weather.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 181424
Job Location: City of Industry, CA
Rate: Up to $20.00 DOE
Duration: 3-6 Months
Input Date: 08/30/2019
Last Updated: 11/12/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 04/06/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 03/27/2018
Last Updated: 11/12/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11431
Job Location: Marietta, GA
Rate: $53.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/30/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11430
Job Location: Fort Worth, TX
Rate: $56.05/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/30/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.
- Must be US citizen.
- MUST HAVE Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11582
Job Location: Palmdale, CA
Rate: $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/30/2019
Last Updated: 11/12/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Designer / Catia V5 - Clearance CA

Description:
166408 Job Title: Tool Design

Work Site Address: Palmdale, CA 93599
Job Number: 2012-1
Max Pay Rate: $75.00/hr
Start Date: 9/17/2019
End Date: 9/11/2020
Position Type: Contract

Job Summary:
Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years

Qty 4 positions

Applicants must not have applied for Tool Design at LM- in the last 6-mo.
 
Job Number: JE-2012-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/04/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer CATIA, W/Secret Clearance

Description:
*This is a full time, 1 year contract position located in Ft Worth, TX*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment including tools, dies, gauges, jigs, fixtures, and prototype model parts.



Required:

*7+ years’ experience in aircraft tool design/fabrication

*Active Secret Clearance, with reinvestigation within the last 5 years

*Strong experience designing using Catia V, generative shape, parts, assembly and draft of workbenches and fabrication using composite materials, cure, trimming, drilling, forming, welding, inspection and assembly.

*Good GD&T knowledge

*Engineering Degree



Preferred:

*Experience in structural analysis/material selection/sizing.

*Experience in electro-mechanical/pneumatic/hydraulic systems design
 
Job Number: 574
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: yes split
Input Date: 09/09/2019
Last Updated: 10/11/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Welder

Description:
Nesco Resource is hiring a Welder for a prominent Manufacturing Company located in the Danbury, CT area. Under general supervision, the welder/pipe fitter is responsible for assembling and installing piping systems, pipe supports, and hydraulic and pneumatic equipment. Installs pipe for steam, hot water, heating, cooling, lubricating and industrial production and processing systems. He is also responsible for welding as it pertains to industrial burners, piping systems ranging from 1/2” to 12” and other fuel oil or steel plate assemblies. Required Qualifications: Minimum education requirement: HS graduate or GED. Minimum 1-2 years' experience in manufacturing or industrial setting. Must be capable of interpreting blueprints, fabricating and welding to specifications. Must be able to perform job in safe manner and produce a quality product. Must successfully complete weld tests, which passes both visual and X-ray testing when needed. Must show qualification in welding per ASME Section IX in at least 3 welding methods when needed. (SMAW, FCAW, GTAW, GMAW) Must know various piping applications Must know how to assemble carbon and stainless weld pipe and screw pipe. Must know how to use associated power tools to produce a quality product in a timely manner (grinder, saw, drill, plasma cutter, drill press, break etc) Has the ability to multi-task Has the ability to work in a team-oriented environment Preferred Qualifications: 1 to 2 year diploma in welding or related instruction 4+ years experience in metal forming or in manufacturing or industrial setting Forklift certified Holds a valid driver's license OSHA 10 or greater. This Position is Monday - Friday, 7:00 am - 3:00 pm It is a Right to Hire/ Temp to hire position. The pay is from $20.00 - $ 30.00/hr depending on experience.


 
Job Number: 19-41304
Job Location: Danbury, CT
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-04 00:00:00.0
Start Date: 2019-10-04 00:00:00.0
Input Date: 10/04/2019
Last Updated: 11/12/2019
Firm Name: NESCO RESOURCE
Attention: Christopher England
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Back to Advanced Job Search