Job Search Results

739 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/16 Saturday 12:52AM Pacific Time by ContractJobHunter. )

Listings 1 - 739

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2219 - FLIGHT SIMULATION SPECIALIST - resume word doc only

Description:
Develop aircraft simulation models. These models are used in the design and validation process of a new aircraft, in support of in-service aircraft and for incident investigation. The models are also deployed in training simulators used to instruct flight crews throughout the world. Flight simulation engineers support the qualification of these flight crew training simulators with regulatory authorities.

Use data from computational fluid dynamics, empirical aerodynamic estimation methods, wind tunnel tests and derive aerodynamic derivatives from flight test data to conceive and update the simulation models.

Develop and maintain bombardier's pilot-in-the-loop engineering flight simulators and participate in planning and testing of new and existing designs, in collaboration with flight test crews.

Interact closely with the stability and Control, System Simulation, Fly-by-Wire, Loads, Systems Engineering and aircraft/engine performance groups, and flight simulator manufacturers.

Use state of the art software, such as Matlab/Simulink, MAtrixX/SystemBuild, to develop the simulation models. In addition, customization and automation of these tools is achieved through programming in C/C++ and other software packages.


Have a Bachelor's or master's degree in Aeronautical (or Mechanical) engineering as well as a minimum of eight (8) years of relevant experience in the Aerospace industry.

Have good knowledge and experience in simulation model development, real-time simulation, flight dynamics, flight testing, test data analysis and application of North American and European simulator qualification requirements.

Have good programming skills. Knowledge of Windows and UNIX operating system environments, Matrixx/SystemBuild, Matlab/Simulink, MS Word, MS Excel, MS Powerpoint are essential.

Have good written and oral communication skills.

It would be an asset to have good knowledge and some experience in wind tunnel testing, flight testing, test data analysis and the application of the FAA/EASA Part 25 certification requirements, along with PV-WAVE, Frame Maker.

Have a thorough understanding of flight simulation model generation for design, rig and pilot training purposes.
 
Job Number: 2219
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2272 - MATERIALS & PROCESSES - COMPLETIONS - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Act as M&P expert;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2272
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2273 - PROGRAM ANALYST - INTERCO- cv. word doc only

Description:
Enable the INTERCO teams by helping to identify and remove obstacles they are facing that could prevent them from meeting the program schedule.

Stay abreast of schedule risks and work with INTERCO to develop mitigation plans.

Raise issues and Report on INTERCO teams progress .

Coordinate with FAL and INTERCO teams to ensure the schedule is well communicated and understood and the individual teams%u2019 plans support the overall program schedule.

Participate in daily INTERCO FAL governance reviews.

Experience in the aerospace industry and a Bachelor's degree in Engineering or equivalent coupled with more than eleven (11) years of relevant work experience.

Specific knowledge of aircraft design, assembly and testing particularly aero-structures and wiring is essential.

Operations experience in an aerospace manufacturing environment.

Demonstrate excellent communication skills in English and French both spoken and written.

Possess strong negotiation skills and are well versed in project management.

Teamwork, customer orientation, leadership and innovation make you an effective person.

Have good knowledge of business drivers such as the financial and schedule aspects of a major development program.

Are familiar applications Microsoft Project, Word, Excel, PowerPoint

Are able to travel internationally and be able to spend extended times at INTERCO sites (St. Laurent, Belfast & Queretaro facilities) as needed.
 
Job Number: 2273
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2279 - AVIONICS. SYSTEMS. ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2279
Job Location: Toronto, Canada
Rate: 85.00 - Canadian
Per Diem: No PD - included in rate
Overtime: Paid at 1.5
Duration: Open
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2280 - CHEMICAL ENGINEER - cv, in word doc please

Description:
Part of a multi-disciplinary team (engineers, unionized staff, technicians) dedicated to optimizing processes and products for business aircraft interiors.

Identify potential solutions, product & process improvements following a scientific analysis of problems arising from interactions between various chemical products (coating systems) and their substrates.

Develop test plans and reports in order to acquire data for scientific analysis.

Coordinate test activities in a production environment in order to ensure proper procedures are followed.

Make technical recommendations as well as create/revise technical documentation in order to improve production efficiency.

Liaise with external laboratories and organizations in order to develop and disseminate a thorough understanding of business jet interior products and technical procedures.

Develop technical criteria and requirements for aerospace grade finishing and coating systems.

Degree in Chemical Engineering (or equivalent) with a specialization in polymers, coatings and organic materials (such as wood) as well as at least 10 years of industry experience.

Able to apply a rigorous engineering method along with scientific knowledge to solve problems attributed to interactions between multiple coating systems and their various substrates.

Familiar and comfortable with the aesthetic requirements stemming from application of coating systems to substrates.

Familiar with wood science & wood coatings in considered an asset.

Strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2280
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2289 - LIAISON ENGINEER - EVENING SHIFT - cv.word doc only

Description:
Responsible for providing engineering support to the production operations at the Assembly Business Unit (Client Programs) during the evening shift and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

Possess a university degree in Mechanical Engineering.

Have eleven (11) years or more MRB experience in the Aerospace field.

Possess Catia and MRB (Material Review Board) work experience.

This position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

Must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Bilingualism - (French and English), would be an asset.

Workday expectations: Evening shift. Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2289
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2291 - SENIOR ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Provide wiring diagram technical and configuration leadership to wiring design team.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership, coaching, mentoring and training to staff.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are proficient with MS Access data entry.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses
 
Job Number: 2291
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2296 - PROJECT MANAGER - cv. word doc only

Description:
Ensure that all activities are aligned with other activities of other cells and maintain regular contact with the people involved.

Coordinate activities to ensure the achievement of the required harmonized way client.

Work independently on a multitude of records (plans) that affect all the expertise involved in the realization of the objectives seeking the capacity to suppliers to ensure timely delivery of various required.

Ensure communication and information sharing among all contributors of development activities to ensure alignment.

Responsible for the timely delivery of various documents of the meetings of the organization (governance).

Plan and monitor plans following delivery of various components.

Work closely with QA team on the floor as well as the upstream supplier management team.

Start the charging process to suppliers in collaboration with the team management of upstream suppliers.

Make the upstream monitoring of non-compliances identified in collaboration with the team of supplier management and ensure to identify the 'top 3'.

Audit suppliers on quality processes in place for the company.

Ensure the maintenance of the objectives of the cycle time with the / suppliers

Respond to emergencies that stop the production line that are connected to non-quality suppliers.

You will work directly with the product (work closely with production management).

College degree in aerospace or the equivalent and minimum of eleven (11) years of experience in aerospace.

Have a very strong experience in the assembly of aircraft (structural and systems).

Bilingual, good communicator, professional and are open to work with other cultures.

Have a good knowledge in Quality procedures, processes and systems.

Have experience with NCMS Systems (Non Conformance Managment System).

Must have experience working in a Manufacturing environment in the aerospace industry.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Knowledge of SAP is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Knowledge on implementation of change management activities is an asset.

Must have excellent communication skills, both written and verbal in both English and French.
 
Job Number: 2296
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2297 - DESIGN ENGINEER - CABINET DETAILED DESIGN - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Excellent knowledge in design and development of concepts using graphic design software.

Collaborate with others in a multidisciplinary team, adapt easily to changes and customer focused.

Customer focused, problem-solving and innovative focus as well;

Experienced with the CATIA V5 3D design tool;

Well organized and project focused.

Good oral and written communication skills in English and French;

Autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2297
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

5 Aircraft Stress Engineers with Composites

Description:
5 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
PDS tech has multiple openings for A&P Mechanics in Greensboro NC. 

Quick  feedback 

Greensboro offers low cost of living, beautiful weather and access to outdoor activites: kayaking, hiking, etc. Please email your current resume to esawyer@pdstech.com for immediate consideration. 

This is a great opportunity to work on Boeing and Airbus aircraft. 

A&P mechanic, job duties include: 

Perform routine inspections, repairs and modifications on aircraft; 
Complete inspections as required by maintenance programs, modification and inspection packages, and troubleshoot aircraft systems. 

Job Requirements / Qualifications: 
* You have FAA Airframe and Powerplant licenses (required). 
* You perform repairs and modifications as required 
* You perform only authorized work 
* You promote safety 
* You perform inspections as required by maintenance programs, modification and inspection packages 
* You advise supervisor/lead of job status at all times 
* You maintain good housekeeping habits 
* You ensure compliance with all environmental, health and safety policies and procedures 
* Other duties may be assigned by supervisor/lead from time to time 
* You perform assigned work to establish standards and estimates routinely 
* You perform system functional tests as required by maintenance programs and logically diagnose malfunctions 
* You must be able to understand and interpret prints 
* You must have a minimum of 2 years MRO experience 

TRAINING DOCUMENTS AND CERTS REQUIRED

Duration
Long-term Open-ended 
 
MUST POSSESS A VALID A&P THAT HAS BEEN USED FOR 6 MONTHS OUT THE LAST 2 YEARS
 
Job Number: 1710062044
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G5sHAAS&URLSource=cjhunter

A&P Mechanic

Description:
PDS is looking for Avionic Technicians with an A&P License to work in Kinston, NC.
  • Must have tools.
  • Must have A&P license.
  • Candidates will be performing heavy checks on regional aircraft.
  • Candidates need at least 2 - 4 years' experience.


 
Job Number: 1710077146
Job Location: Kinston, NC
Per Diem: No
Duration: 0 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PS5AAM&URLSource=cjhunter

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

A&P Mechanic

Description:
PDS Tech Inc is seeking an A&P Mechanic for an open position in Wichita, KS

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during the performance of maintenance duties. Assists in the cleaning of parts and components during the repair and assembly of aircraft. Performs other tasks and duties associated with the aircraft operation
 
Formal training and fundamental hands on skills for mechanical troubleshooting maintenance and repair of aircraft systems.
Ability to deal with change and work in a dynamic environment.
Ability to follow maintenance manuals, interpret blueprints and drawings, and accurately document performed tasks.
Excellent written and verbal communication skills.
Professional demeanor and appearance.
Must have positive attitude with the determination to perform work and communicate with utmost integrity.
 
 
Job Number: 1710076399
Job Location: Wichita, KS
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NNEAA2&URLSource=cjhunter

A&P Mechanic

Description:
PDS Tech Inc. is seeking a candidate for the A&P Mechanic- Intermediate position located in Orlando, FL.  

JOB DUTIES:
  • Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
  • Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of customers aircraft.
  • Required to tow and move aircraft during the performance of maintenance duties.
  • Assists in the cleaning of parts and components during the repair and assembly of aircraft.
  • Performs other tasks and duties associated with the service center operation.



For Additional Information on this Opening Please Contact Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

EDUCATION:
  • Requires high school or equivalent.
  • One year of experience or working knowledge of mechanical devices.
  • Prefer basic knowledge of aircraft systems.
  • Must have a complete set of hand tools particular to his trade.
  • Requires A&P license.
  • Must have at least one year minimum experience to mechanical repair of vehicles, preferably aircraft – whether through technical training, apprenticeship, schooling, or similar experience.



For Additional Information on this Opening Please Contact Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com


 


 
Job Number: 1710070411
Job Location: Orlando, FL
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002347kAAA&URLSource=cjhunter

A&P Mechanic

Description:
PDS Tech is seeking a  A&P Mechanic for an open position in Newburgh, NY.
In your role, you will:

  • Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
  • Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft.


 

 

 


As our ideal candidate, you will meet the following requirements:
  • Requires use of arithmetic, blueprints and specifications plus a knowledge of jet and piston airframe and engine principles. Equivalent to a high school education plus an A&P Mechanic license.
     
    Must have a minimum of two years experience in aircraft/flight maintenance or airframe sheet metal maintenance. Preferred experience in a customer service facility performing inspections and repair of aircraft.
     

 


 

 
Job Number: 1710074210
Job Location: Newburgh, NY
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IDhAAM&URLSource=cjhunter

A&P Mechanic - Licensed

Description:
Our client in Greensboro is looking for 5 licensed A&P mechanics for both day and night shift positions.

FAA Part 145 Repair Station.  Work on private/corporate aircraft.  Ideal candidates have experience with heavy/light checks, remove and replace, certs, troubleshooting and typical inspection experience.
Exp and requirements:
•    A&P Lic is required
•    FAR 145 experience/Maintenance Repair & Overhaul MRO
•    3-5 years of Corporate/General aviation experience.
 
TOOLS:
•    Must have own full set of tools
•    Must be etched and shadowed



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status
 
 
Job Number: 1710071683
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238gjAAA&URLSource=cjhunter

A&P Mechanic- 2nd shift

Description:





PDS TECH is currently looking for many A&P Mechanics for our client in Long Beach, CA



Education and Experience Requirements:


High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.

Position Purpose:



Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 

Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.




 



 






 





 
Job Number: 1710072948
Job Location: Long Beach, CA
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EbiAAE&URLSource=cjhunter

A&P Mechanic-Intermediate

Description:
PDS Tech is seeking a Senior A&P Mechanic for an open position in Indianapolis, IN.
In your role, you will:

  • Repair and maintain components used for aircraft airframe and power plant.
  • Inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems.
  • Maintain records related to the maintenance performed on the aircraft.
  • Conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors.
  • Repair or replace worn or defective parts.
  • May also repair sheet metal or composite surfaces. Mechanics rely on the pilot’s description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.
  • Perform routine inspections and troubleshooting, including airframe structures, engines, and aircraft system.
  • Perform all airframe, power plant and propeller repairs and modifications required to meet company and FAA requirements.
  • Removal and disassembly of defective parts; assembly and installation of replacement parts; and testing aircraft system.
  • Operate all power tools and equipment necessary to accomplish job assignment.
  • Complete all required maintenance records.
  • Accurately record time worked on a work order.
  • Present a clean and neat work area to our customers.
  • Interpret technical manuals, drawings and blueprints.
  • Tow and park aircraft.
  • Perform other aircraft maintenance work as may be required.
  • Perform varied additional duties as assigned.


For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status


 

o High school education or equivalent
o A&P license
o Use of arithmetic, blueprints, and specifications plus knowledge of jet an piston airframe and engine principles
o Minimum of 2 years experience as a licensed A&P Mechanic. One year required on Cessna, Hawker, or Beechcraft aircraft performing inspections and repair of aircraft.
 
For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status

 
Job Number: 1710065657
Job Location: INpolis, IN
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021YtmAAE&URLSource=cjhunter

A&P Mechanics - 2nd shift

Description:







PDS TECH INC is looking for SEVERAL A&P Tech's for our client in Long Beach (2nd shift)





Must have A&P license.




Education and Experience Requirements:


High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.


Position Purpose:



Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians. 8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 

Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.






 






 
Job Number: 1710076849
Job Location: Long Beach, CA
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023OPXAA2&URLSource=cjhunter

AIRFRAME DESIGN - Grade 07

Description:
PDS Tech, Inc. is seeking a candidate for the AIRFRAME DESIGN - Grade 07 position located in Stratford, CT.

The ADME Core Services group supplements ADME’s technical engineering expertise with best-in-class project execution capabilities enabling it to excel in meeting defined business objectives. The Engineering Estimating element of Core Services supports client's USGBO Proposals for both Foreign Military Sales (FMS) and Direct Commercial Sales (DCS) customers. 

The Engineering Estimating Specialist will: 
1. Support the Estimating Lead by developing estimates and proposal related documents. 
a. Provide detailed estimates to the Estimating Lead based on USGBO schedules, Statements of Work, Configuration Matrices, and Bill of Materials. 
b. Help develop Engineering Design plans to support proposal requirements. 
c. Estimate Airframe Design Engineering budgets. 
i. Must have a working knowledge of Airframe Structures and Aircraft systems. Experience with the Blackhawk product preferred. 
ii. Must have a working knowledge of aircraft drawings. Must be able to interpret aircraft drawing and Bills of Material. Experience in Airframe Design required. 
iii. Working knowledge of a WBS structure and the SAC Contract Operating System (COS) is preferred. 
iv. Must have a working knowledge of DFARS compliant estimating requirements. 
d. Estimate Airframe Process Engineering budgets. 
i. Must have a working knowledge of Aircraft Planning and Tooling methods. 
ii. A Working knowledge of Systems, Applications & Products in Data Processing (SAP) and Solumina is a plus. 
e. Review Proposal Statements of Work. Understand requirements and provide feedback on compliance issues. 
f. Review Proposal Schedules. Provide feedback on plan/schedule issues. 
g. Help develop Engineering Integrated Master Schedule (IMS) activities and linkages. 
h. Must be able to work independently and coordinate efforts with concurrent branches/resources. 
Experience/Qualifications: 
The ideal candidate will demonstrate many or all of the following qualifications: 
• BS in engineering or suitable equivalent 
• Minimum of 5-6 years of experience in aircraft design or manufacturing engineering 
• Minimum of 2-3 years of experience in aircraft estimating 
• Ability to communicate effectively with leadership and working level team members 
• Highly motivated and flexible individual with a track record of demonstrated results 
• Working knowledge of SAC Contract Operating System (COS). Experience with Systems, Applications & Products in Data Processing (SAP) is a plus. Experience with Solumina is a plus. 
• Strong MS Excel, Word & Power Point skills
 
Job Number: 1710069401
Job Location: Stratford, CT
Duration: 14 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K3oeAAC&URLSource=cjhunter

Account Specialist

Description:
PDS Tech, Inc. is seeking a candidate for the Account Specialist position located in Trumbull, CT.

Manage supplier accounts. Responsibilities include develop and drive commercial strategy and contract administration with suppliers, lead supplier negotiations, coordinate and support supplier proposals for new program selection, provide oversight and leadership with regards to supplier performance such as deliveries, quality, cost management, and continuous improvement, and develop a strategic outlook of supplier capability. 

Job Description: 

Basic Duties and Responsibilities: Work with suppliers to have material delivered to client per customer requirements and perform buyer functions. 

Statement of Work: 

Manage suppliers for the delivery of material to fulfill external and internal customer requirements. 

• Daily calls with suppliers to insure on time delivery per MRP schedules. 

• Coordinate with suppliers to populate the SDS commit file looking out 90 days. 

• Work with suppliers on material delays in regards to technical issues 

• Manage vendor relationships and performance issues 

• Be aware of and follow all applicable Federal Aviation Regulations, hazardous materials requirements, repair station requirements, FARS and DFARS, and client's Aircraft policies 

• Other tasks and duties as assigned by management 

• Coordinate with customer groups and suppliers for the expediting of urgent material. 

• Manage vendor relationships and performance issues 

• Be aware of and follow all applicable Federal Aviation Regulations, hazardous materials requirements, repair station requirements, FARS and DFARS, and client's Aircraft policies 

• Other tasks and duties as assigned by management 

Experience Preferred: SAP, purchasing, material planning; advanced computer skills especially with Access
Education Level:
  • Bachelor of Science

 
Job Number: 1710071464
Job Location: Trumbull, CT
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002388mAAA&URLSource=cjhunter

Adv Compos Tech I

Description:

Position Purpose:



Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment. 

Principal Duties and Responsibilities:

Essential Functions: 1. Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Check all work and ensure a defect free assembly prior to inspection. 5. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 6. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 7. Support Lean activities. 

Additional Functions: 1. Perform other duties as assigned. 


Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.



 

Education and Experience Requirements:



High School graduate or GED. Basic computer skills. One (1) year related composite experience. Ability to work with composite resins and materials. Requires ability to read a interpret blueprints. Read and interpret 6" scale.

Unique Skills:



Composite layup experience in an aircraft environment preferred but not required. Experience working with autoclaves and/or Gerber machines also desirable.



 

 
Job Number: 1710077099
Job Location: Savannah, GA
Per Diem: No
Duration: 0 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PNoAAM&URLSource=cjhunter

Aerodynamics & Performance Engineer

Description:
PDS TECH INC is looking for an Aerodynamics and Performance Engineer for our customer in San Diego.
 
  • Develop analysis tools, perform mathematical modeling, and provide aerodynamic design support for new aircraft and modifications to existing aircraft (both fixed wing and/or rotorcraft).

  • Support various tests including wind tunnel tests and flight tests, including reducing and analyzing the data after the test and documenting the results.



  • Responsibilities will include aerodynamic database development, aircraft performance analysis, mathematical modeling, simulation development and support, flight data analysis, and documentation.



  • Position requires strong analytical and communication skills (written & oral)  and the ability to work closely with different test and design groups, including the CFD, Simulation, Software, and Flight Controls Groups.



  • Candidate must be competent with Matlab, MS office products (Word, Excel, PowerPoint), and have excellent technical writing skills.



  • Familiarity with MS Project, C++, Simulink, and expert user of  Matlab is desirable.




Prior experience with aircraft flight testing and knowledge of flight dynamics, flight data analysis and interpretation, and development of data analysis tools would be very useful.



Essential Qualifications:
 



  • Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
  • Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. 
    Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. 
  • Able to work extended hours as required.
    A Professional Engineering License is desirable.

Essential Qualifications
Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.

Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance.

Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables.

Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team.
Must be able to work extended hours as required.

An EIT (Engineer in Training) certificate is desirable.

Security clearance desirable
 
Job Number: 1710077300
Job Location: San Diego, CA
Per Diem: Yes
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Natasha Raina
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Q4fAAE&URLSource=cjhunter

Aerodynamics & Performance Engineer windtunnel, flight testing, 6DOF, Aerodynamics database, aircraft conceptual CA

Description:
14482

Title TEMP Aerodynamics & Performance Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
•Develop analysis tools, perform mathematical modeling, and provide aerodynamic design support for new aircraft and modifications to existing aircraft (both fixed wing and/or rotorcraft).

•Support various tests including wind tunnel tests and flight tests, including reducing and analyzing the data after the test and documenting the results.


•Responsibilities will include aerodynamic database development, aircraft performance analysis, mathematical modeling, simulation development and support, flight data analysis, and documentation.


•Position requires strong analytical and communication skills (written & oral) and the ability to work closely with different test and design groups, including the CFD, Simulation, Software, and Flight Controls Groups.


•Candidate must be competent with Matlab, MS office products (Word, Excel, PowerPoint), and have excellent technical writing skills.


•Familiarity with MS Project, C++, Simulink, and expert user of Matlab is desirable.


Prior experience with aircraft flight testing and knowledge of flight dynamics, flight data analysis and interpretation, and development of data analysis tools would be very useful.


Essential Qualifications:

•Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.

•Able to work extended hours as required.

•A Professional Engineering License is desirable.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14482
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeroperformance Engineers

Description:
Performance and handling qualities for aircraft/aerospace plane applications

Rate: $65+/hr, depending on experience

-Holiday Pay
-Longevity Pay
-Medical/Dental Insurance
-Weekly Pay
-Identity Theft Protection
-401(k) Immediate Enrollment
-Direct Deposit

PDS is an equal opportunity employer
EOE M/F/D/V (minorities, female, disabled, veterans)
 
Job Location: Mojave, CA
Input Date: 09/26/2017
Firm Name: PDS TECHNICAL SERVICES
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
800 Phone: 866/458-4322
Email: ppress@pdstech.com
Website: www.pdstech.com

Aerospace Design Support and Training Instructor/TSI

Description:
PDS Tech is seeking a Aerospace Design Support and Training Instructor/TSI for an open position in Savannah, GA.
In your role, you will:


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of the Client's products and services.

Essential Functions:
  1. Contributes to planning, developing and coordinating of important engineering projects
  2. Provides specialized technical assistance to team members
  3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  4. Determines and develops own approach to solutions within schedule and cost objectives
  5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  6. Acts as liaison with representatives outside of the assigned group/area 


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

As our ideal candidate, you will meet the following requirements:
 

Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 2000+ hours. Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Generative Surfacing a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Established background of instruction or support role. Formal Classroom instruction experience required.

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability. 



 
Job Number: 1610055767
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002MyvjAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
Now Hiring Aerospace Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Engineer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Duties:

• The successful candidate serves as an engineer driving commercial aircraft sheet-metal and composite component repair and vendor oversight
• Reviewing data and recommending and implementing changes as required
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation
• Preparing and conducting Engineering Working Group meetings
• Revising numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Occasional travel is required to support the programs
• This position will focus, initially, on aircraft composite & mechanical component systems
• This position reports to a lead engineer and the Manager of Component Engineering

Qualifications:

• Bachelor Degree in Engineering with 0-5 years’ aviation related experience focus on repair development
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are highly desired
• Understanding of composite structure related to aircraft Thrust Reverses is preferred, but not required
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40578
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Engineer - California

Description:
Leading aircraft company are seeking an experienced Aerospace Test Engineer to support the development, integration and testing of an ejectable flight data recorder project. This is in the early stages of the project and the role will support all phases of system development including design and analysis, requirements compliance methods, certification (verification / validation) test preparation, and integration into large scale commercial aircraft environments.

Responsibilities include:

* Identify testing required for verification and validation using industry standards & regulations
* Prepare system and component functional and performance certification test procedures, manufacturing test methods and procedures, in accordance with input from other team members.
* Review and evaluate identified program functional and performance requirements for applicability to program goals and objectives.
* Establish testing protocols and test requirements based upon test specifications, drawings, as well as manufacturing and process specifications.
* Identify industry standard test equipment and resources
* Conduct and/or witness mechanical and environmental tests for FAA certification. .
* Test and certification will include subcomponent and component system qualification, for both mechanical and electrical requirements
* Position will require interfacing with the FAA or designated engineering representative, preparation of technical status presentations and leading detailed test reviews.

You will have considerable experience in aerospace structural and electrical testing and must be familiar with aerospace test standards MIL-STD-810 and DO-160, with DO-178 and DO-254 knowledge preferred. A working knowledge of CATIA V5 and DOORS requirements management tool would also be useful.

Experience must include a strong background in the aerospace engineering requirements and verification process and the ability to understand mechanical and electrical aerospace drawings, environmental requirements, test requirements, and various aerospace test methods.

This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
 
Job Number: JO0000000012
Job Location: Newport Beach, CA
Rate: to $75/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Aircraft Assembly Technician

Description:
PDS Tech is seeking an Aircraft Assembly Technician for an open position in Mesa, AZ.
In your role, you will:

  • Assemble, modify and install aircraft assemblies, subassemblies, components, systems and airframe structures on aircraft systems. Identify nonconforming parts, conditions and processes.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  •  

 
Job Number: 1710075425
Job Location: Mesa, AZ
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LNCAA2&URLSource=cjhunter

Aircraft Cabin Interiors Engineer

Description:
-Holiday Pay
-Longevity Pay
-Medical/Dental Insurance
-Weekly Pay
-Identity Theft Protection
-401(k) Immediate Enrollment
-Direct Deposit

PDS is an equal opportunity employer
EOE M/F/D/V (minorities, female, disabled, veterans)
 
Job Location: Savannah, GA
Input Date: 09/26/2017
Firm Name: PDS TECHNICAL SERVICES
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Denver, CO

Description:
STS AeroStaff Services is currently hiring Aircraft Data Entry Operators for open positions in Denver, Colorado.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Data Entry Operators will oversee all aspects of Records retention, maintaining accurate records for each aircraft and components. Audit online records and approved maintenance record database daily, ensuring all maintenance entries are accounted for and accurate. Organizes and reviews all aircraft data relating to the TCI, aircraft flight times, aircraft log pages, and maintenance activities that have been performed on the aircraft to ensure proper airworthiness in accordance with CFRs.

Job Duties:

• Ensure the accuracy and completeness of all records; update databases for lease return and induction activities; Scan or upload all documentation to the ERRP.
• Read & interpret technical data, to be input in the maintenance database, as required.
• Ensure all maintenance records received into Aircraft Records are entered into approved maintenance record database daily.
• Scan, Audit, and index all documents into the ERRP to comply with the FARs.
• Audit the documentation for accuracy and completion as outlined in the GMM & FARs.
• Accurately track all serialized components on the aircraft.
• Record hours/cycles daily; correct aircraft hours and cycles on parts tags, EOs, ADs, FCDs, and A-Checks for accurate data input into the Maintenance database.
• Enter component removal and replacement in the maintenance database; ensure that part numbers and serial numbers are accurate.
• Perform other duties as required or directed from supervisor of the department.

Qualifications:

• High school diploma or GED & the ability to interpret technical data.
• Four years of aircraft related work & familiarity with Aviation terminology.
• Effective oral and written communication skills.
• Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
• Preferred - Experience with aircraft MRO systems & Experience with electronic records management systems.
• Preferred - Previous aircraft records experience.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 35489
Job Location: Denver, CO
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Engine Test Engineer

Description:
Degreed, with integration, testing, certification, components through systems

Job location: Shanghai, Cinha

-Holiday Pay
-Longevity Pay
-Medical/Dental Insurance
-Weekly Pay
-Identity Theft Protection
-401(k) Immediate Enrollment
-Direct Deposit

PDS is an equal opportunity employer
EOE M/F/D/V (minorities, female, disabled, veterans)
 
Job Location: China
Duration: direct
Input Date: 09/26/2017
Firm Name: PDS TECHNICAL SERVICES
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
800 Phone: 866/458-4322
Email: ppress@pdstech.com
Website: www.pdstech.com

Aircraft Fleet Management Leader

Description:

Legacy Engineering, a division of PDS Tech, is seeking an Aircraft Fleet Management Leader for the Regional Jet Development Program.



Promotion to Director Level will be indicated based on performance.



This position is located in Nagoya, Japan, and will require extensive international travel to customer sites. 



The Regional Jet Fleet Chief is the primary company executive focal to customer airlines for any in-service technical or business issue. The role is to work across the company leadership team (primarily with the Chief Engineer) to quickly resolve customer issues/concerns and to represent the “voice of the customer” within the company. This person leads the world-wide Fleet Management organization which includes the following functions and processes: the Customer Service Management function, the Field Service function, the entry-into-service Start-up Teams. In addition, the Fleet Management Group has responsibility to represent the customer in the aircraft change and/or Continued Airworthiness process to improve overall safety and economics. Lastly, once fully developed and deployed, the Fleet Management Group is responsible for the definition and requirements of the Customer Portal with support from the respective IT Manager from the Planning and Programs Manager assigned to Fleet Management.



 Additional group leader responsibilities include establishing deliverable commitments, work priorities, creating and managing the development process, creating the team as needed (including 3rd parties required to supplement company staff) and team structure, implementing governance and communication processes, and evaluating the performance of the group.



Reports to:



Senior Vice President and Head of Customer Support



Scope of Work



Fleet Chief



As the Fleet Chief, this person is the primary technical focal point to airline customers for any in-service issues. Critical issues will be managed across the Program with Engineering and Program Management. As part of the Continued Airworthiness process, the Fleet Chief is responsible to establish and manage the Lead Airline Process, working directly with the Lead Airline to determine the impact of potential safety issues or Service Related Problems (SRPs) and developing interim and terminating actions. In addition, the Fleet Chief will create and manage the Fleet Improvement Process to develop solutions for chronic reliability or performance issues. The Fleet Chief will hold regular executive reviews with airline customer management to provide reports on fleet performance and status on resolving high-priority airline issues.



Field Service



Field Service is Customer Support first line of defense and, for the airline, is the experienced face of Customer Support. Field Service Representatives are located at the customer to offer technical advice, informal training, to serve as the liaison between the airline and the rest of Customer Service, to communicate and expedite actions or support needed from company and to be a firsthand observer about the airlines strengths and weaknesses in handling the aircraft in service. If customers raise issues and concerns the Field Service Representatives cannot resolve on their own, they can engage the company engineering team through the Service Request process. When specific issues require significant coordination or are of strategic importance to the customer, the Field Service Representative can engage Customer Service Management for administrative assistance.



Customer Service Management



The Customer Service Management function provides direct engagement with customer airlines, through Account Managers, to ensure customer business and technical issues are being properly prioritized and resolved by the correct company organization. This function also has a centralized team at Nagoya which is responsible for internal coordination/resolution of customer issues. The internal team also provides administrative support for the Fleet Chief to provide status on issues and to prepare for scheduled customer executive meetings.



Customer Airline Entry into Service (EIS) and Start Up



Start-up Teams will be formed and dispatched to be on-site with customers as they prepare to receive their first airplane and to assist airline with initial operation and maintenance through the first few months after delivery. Start-up Teams (SUT) will be made up of specialists from various company disciplines including Service Engineering, Design Engineering (on loan to Customer Support), and Suppliers. Start-up Team activities include:



On-site maintenance and troubleshooting support during training flights, regulator proving runs, and the first few months of revenue service



Clarification of flight and maintenance documentation based upon questions received and issues raised



Real-time coordination with company resources in Nagoya to answer any performance and operational questions



Identification and coordination with appropriate company organizations for the correction of any errors or omissions identified in the flight and maintenance manuals



On-site reinforcement of customer airline aircraft training (particularly maintenance, ground handling and ramp services)


Expected Education/Experience and Skills:



Qualified candidates must hold an engineering degree from an accredited Engineering School.



Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 10 or more years in leadership positions in Design Engineering and/or providing Service Engineering functions supporting commercial airline customers.



Candidates must have Regulatory (FAA/EASA/JCAB) coordination experience.



Candidate must have proven interpersonal skills and strong project management skills



Candidates must have skills and experience managing Suppliers.


 
Job Number: 1710069297
Job Location: Nagoya,
Duration: 36 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K3ACAA0&URLSource=cjhunter

Aircraft Inspector (2) FL-C

Description:
Chipton Ross is seeking 2 Aircraft Inspectors for a contract assignment in Jacksonville, FL.

RESPONSIBILITIES:
Verifies product conformance to design requirements. Validates work instructions, tooling requirements, certifications, process standards, policies and procedures. Identifies and documents discrepancies. Segregates and controls non-conforming items to prevent unintended use or delivery. Verifies compliance to customer requirements. Identifies opportunities for corrective action while performing product or process verification.
Quality Orientation:
Follows established procedures for completing work tasks within own work group. Watches over job processes, tasks, and work products to ensure freedom from errors, omissions, or defects. Usually initiates action to correct routine quality problems.

REQUIREMENTS:
Engineering Drawings & Specs:
Basic ability to read, understand, and interpret engineering drawings and specifications.

Exp Hardware Inspect & Valid:
Basic knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test hardware components and assemblies (e.g. conventional gages and measurement tools, CMM, laser tracker, theodolites). Familiarity with associated validation software for comparative analysis. Basic ability to document and report on results, and address discrepancies.

Quality Systems Process :
Basic knowledge of Quality System processes, quality documentation and paper flow.

Repair Processes and Concepts :
Basic knowledge in one or more of the following: repair concepts including repair station processes, component repair concepts, procedures, and warranty processes and contractual agreements.

Preferred F-16 and/or F-18 experience

EDUCATION:
HS Diploma

WORK HOURS:
1ST SHIFT-6AM-2:30PM

TRAVEL:
NONE

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166197
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Inspectors - Jacksonville, FL

Description:
Now Hiring Aircraft Inspectors!

Overview:

STS AeroStaff Services is now offering Aircraft Inspector jobs in Jacksonville, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best inspection jobs in Jacksonville, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aircraft Inspector, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Verifies product conformance to design requirements
• Validates work instructions, tooling requirements, certifications, process standards, policies and procedures
• Identifies and documents discrepancies
• Segregates and controls non-conforming items to prevent unintended use or delivery
• Verifies compliance to customer requirements
• Identifies opportunities for corrective action while performing product or process verification
• Follows established procedures for completing work tasks within own work group
• Watches over job processes, tasks, and work products to ensure freedom from errors, omissions, or defects
• Usually initiates action to correct routine quality problems

Qualifications:

• Preferred F-16 and/or F-18 experience
• Basic ability to read, understand, and interpret engineering drawings and specifications
• Basic knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test hardware components and assemblies (e.g. conventional gages and measurement tools, CMM, laser tracker, theodolites)
• Familiarity with associated validation software for comparative analysis
• Basic ability to document and report on results, and address discrepancies
• Basic knowledge of Quality System processes, quality documentation and paper flow
• Basic knowledge in one or more of the following: repair concepts including repair station processes, component repair concepts, procedures, and warranty processes and contractual agreements

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40526
Job Location: Jacksonville, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Interior Tech

Description:

PDS is seeking a Aircraft Interior Tech for an open position in Greensboro, NC
In your role, you will:


Position Purpose:
Works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.


Principal Duties and Responsibilities:

Essential Functions:

1. Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications.
2. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
3. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards.
4. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations.
5. Assist technicians, under supervision, with aircraft maintenance requirements.

 
 
Other Requirements: 

Education and Experience Requirements:
  1. High school diploma/GED.Two (3) years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.
  2. Ability to read, write, speak, and understand the English language. 
  3. Ability to read and interpret blueprints and engineering documentation. 
  4. Ability to use hand/power tools and equipment associated with installation and removal of interiors. 
  5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 
  6.  Must be computer literate. 
  7. Excellent communication skills, both verbal and written.

 
Job Number: 1710062037
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G5riAAC&URLSource=cjhunter

Aircraft Interiors Designers

Description:
BS degree and 5+ years of experience on aircraft interiors; must have CATIA and AutoCAD

Holiday Pay
Longevity Pay
Medical/Dental Insurance
Weekly Pay
Identity Theft Protection
401(k) Immediate Enrollment
Direct Deposit
Equal Opportunity Employer EOE M/F/D/V
 
Job Location: Los Angeles County, CA
Input Date: 09/26/2017
Firm Name: PDS TECHNICAL SERVICES
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Email: costamesa_ca@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft MEL Controllers - Long Island City, NY

Description:
STS AeroStaff Services is hiring Aircraft MEL Controllers for open positions in Long Island City, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Minimum Equipment List Controller reports to the Minimum Equipment List Program
Manager. This position interacts with regulatory authorities, business partners and internal
customers such as Technical Operations, System Operations and Flight Operations to provide
subject matter expertise, technical manual authoring and revision service of the fleet, Minimum Equipment List (MEL), Configuration Deviation List (CDL), and Non Essential Equipment and Furnishings List (NEF) manuals in compliance with the company and regulatory guidelines. The MEL Controller provides cost avoidance relating to additional parts, tooling, manpower that would be necessary due to out of service events and delays incurred form inoperative equipment and furnishings.

Job Duties:

• Point of contact for MEL Program manuals, responsible for administering manual change requests that include the revision, review, and approval process
• Coordinate MEL, CDL and NEF revisions based on input from Technical Operations, System Operations, Flight Operations, Dispatch, and to ensure changes meet regulatory requirements
• Interact with the FAA Principal Inspectors to ensure compliance with Operations Specifications, Code of Federal Regulations (CFRs) and Master Minimum Equipment List (MMEL)
• Assist with the facilitation of the MEL Review Board to include scheduling, review of FAA revisions, MEL IT requests and provide status updates of revisions in work
• Participate in industry conferences, including FAA Flight Operations Evaluation Board (FOEB), Master Minimum Equipment List (MMEL) Policy Letter and business partner meetings for software and other products

Knowledge, Skills, and Abilities:

• Proficient in Microsoft Word, Adobe Acrobat, Arbortext Editor
• Knowledge of Airbus and Embraer aircraft fleet types preferred
• Proficient in use of Airlines 4 America (A4A) Spec 100, CFRs, airworthiness requirements and industry standards
• Keep crew leaders and others informed as appropriate; conveys ideas and information clearly in both written and verbal communication
• Ability to work well with others and complete tasks with minimal supervision
• Ability to multi task and work under pressure in a dynamic environment
• Knowledge of Maintenance & Engineering systems preferred
• Knowledge of Sabre/FliteTrac preferred

Key Competencies:

• Aircraft Knowledge
• Analytical Thinking
• Safety and Risk Management
• Service Excellence
• Stress Tolerance
• Embraces Change

Experiences Preferred:

• Technical Writing
• Working knowledge of System Operations practices
• Working knowledge of Aircraft Maintenance practices
• Working knowledge of Flight Operations practices
• Working knowledge of Dispatch practices

Motivational Fit:

• Compliance
• High Involvement Member
• High Responsibility/Accountability
• Daily interaction with people at different levels within the organization including developing and maintaining ongoing relationships
• Working under pressure often under time constraints

Minimum Experience and Qualifications:

• High School Diploma or General Education Development (GED) Diploma
• Degree in Aviation Maintenance Management or Engineering preferred
• Valid Federal Aviation Administration (FAA) Airman Certificate, Airframe and Powerplant Rating preferred; Valid Federal Communications Commission (FCC) General Radiotelephone license preferred
• Ten (10) years’ experience on commercial Part 121 aircraft or one of the following: six (6) years’ of military equivalent experience; ten (10) years of Part 91, 125 or 135 experience
• Two (2) years’ previous leadership experience in Maintenance environment preferred
• Prior Maintenance Control, Dispatch or Pilot experience considered
• Familiar with special qualifications such as Airworthiness release, CAT III authorization, RVSM and Quality Control RII preferred
• Able to work a flexible schedule
• Valid Passport with the ability to travel in and out of the United States preferred
• Must obtain local airport ID (SIDA)
• Regular attendance and punctuality
• Organizational fit for the client culture, that is, exhibit the client values of Safety, Caring, Integrity, Fun and Passion
• Well-groomed and able to maintain a professional appearance
• Pass a ten (10) year background check and pre-employment drug test
• Legally eligible to work in the country in which the position is located
• When working or traveling on client flights, and if time permits, all capable crewmembers are asked to assist with light cleaning of the aircraft

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34473
Job Location: Long Island City, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Planners - Ypsilanti, MI

Description:
STS AeroStaff Services is hiring Aircraft Maintenance Planners in Ypsilanti, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Ensure scheduled maintenance is issued and accomplished within calendar, flight-hour and flight cycle limits as specified by our client’s Maintenance program, Federal Aviation Regulations, Airworthiness Directives and Special Inspections
• Work with the Quality Control department in reading, interpreting and implementing Airworthiness Directives and Service Bulletins; and researching aircraft records
• Work with Maintenance Control, Quality Control and Stores to ensure personnel and materials are in place for work to be issued
• Use company data base to: Monitor aircraft Location, TAT & TAC, Forecast maintenance, Create work orders and Maintenance Tasks
• Create and update Maintenance Action Plans (MAP), Fleet Campaign Directives (FCD), Advisory Notices (AN), Reports, Forecasts, Work Scopes, & Maintenance Check Packages
• Prepare, issue, and audit maintenance check work packages
• Assist in the implementation of new aircraft into the fleet

Qualifications:

• Must be a U.S. Citizen
• 3 years’ experience in large aircraft heavy maintenance (A&P License/QC experience preferred), or 3 years’ experience in large aircraft heavy Maintenance Planning
• Experience in reading and understanding Airworthiness Directives (AD) and Service Bulletins (SB)
• Effectivity to the fleet (Group, Configuration, Condition)
• Required actions & constraints
• Required materials (parts & tooling)
• Required number of persons & skill set, task hours, and aircraft ground time to accomplish task
• Applicable SB Work Instructions, Figures, & Tables
• General knowledge of large aircraft systems and structures (Boeing 747-200 and -400 Series preferred)
• Working knowledge of large aircraft manuals (i.e. AMM, IPC, SRM, MPD, CPCP, SSID, NDT, RAG).
• Computer experience with Aviation Data Bases, Microsoft Word and Excel
• Read, write, and understand spoken and written English
• Create and update routine reports and correspondence in Microsoft Word & Excel formats
• Create logical/coherent/grammatical messages using Microsoft Outlook to communicate ideas, thoughts, and instructions which can be understood by large variable groups (i.e. Operations, Maintenance, QC, Stores, etc.)
• Add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals
• Convert between different units of measure
• Compute rate, ratio, and percentage

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39903
Job Location: Ypsilanti, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Management Systems/ECS Qualification Test Engineer

Description:
Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Hartford, CT
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Materials Specialists - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Aircraft Materials Specialists for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Material Specialist Receiving for Heavy Mx Mod Support is responsible for Receiving aircraft parts into M&E system (TRAX) as per client GMM requirements for use on client aircraft. The Material Specialist Receiving must ensure all required information is correctly entered into TRAX and correctly entered on the parts tag and label.

Job Duties:

• Material Specialist Receiving must be trained in the receiving process to perform receiving procedures
• All parts must be checked for documentation and damage
• Any Suspected Unapproved aircraft part must be reported to the Director of Quality
• Part numbers must be entered into the M&E System to determine if the part is eligible for use on client aircraft and if there are any Airworthiness Directives or Limitations affecting the part
• Make entries in the M&E System as either Purchase Order or Repair Order as applicable from Approved Vendors as per the Approved Vendor List (AVL)
• Ensure Documentation Certificates are with the parts as per GMM (FAA Form 8130 as applicable, Burn certificates as applicable, Packing slips, etc)
• Ensure Part number and Serial Number on the Data plate matches the PN on the documentation
• Initiate and complete a bar code label and client Maintenance Parts Tag (MX-41) for repairables and rotables as per the GMM
• Ensure the Manufacturer Part Number (MPN) and Serial Number (SN) on the bar code label is correct for the part and supporting documentation
• Notify Configuration Control/Inventory Control to update the M&E system to reflect correct information if Part number does not match in TRAX label before part goes to Receiving Inspection
• Scan of the 8130/EASA1 and all corresponding documentation into M&E System
• Build sub-assemblies (VDU’s for Seat assembly must be entered in proper position of the assembly)
• SB Kits must be programmed/built properly in TRAX with appropriate sub-assemblies and sub-kits
• Verify kit NLK list and ensure kit is built correctly. Verify serialized sub-components of NHA are received correctly
• Coordinate with EOCOOR for PO discrepancies, etc.
• Ensure all parts for kit shortages, FOC PO’s etc. are receiving to complete kits
• Receive Inbound Transfer Orders for client provided material into TRAX to ensure Material is available at location
• Notify appropriate parties of discrepancies of inbound material
• Quarantine Inbound items missing or incorrect paperwork and other issues
• The communication chain starts with the receiving Material CM
• Match MX-41 tags/labels to parts to proceed with MRO receiving process
• Must print MX-41 Tag after QC Inspection (R/I) is completed for MRO to start their Receiving process

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38254
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Painter

Description:
PDS is seeking an Aircraft Painter for an open position in Indianapolis, IN.
Individuals with auto painting experience of at least 1 year will be considered and are strongly encouraged to apply. 

  • This job requires the preparation of surfaces for painting with processes such as sanding, brushing, and applying cleaning solutions; spray painting of primer and apply sound deadening material per specifications.
  • Assist higher grade painters as required.
  • Apply various kinds of primer on any required surface, according to specifications. Spray Painter and color finish coats on detail parts and sub-assemblies.
  • Dismantle, clean, assemble, and adjust spray guns and other equipment used in work.
  • Perform necessary brush touch-ups work.
  • Mix paints, materials, and all other aircraft finishes.



For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to kroberts@pdstech.com



  • At least 1 yr experience. 
  • Aircraft or auto paint experience preferred.



For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to kroberts@pdstech.com



 
Job Number: 1710068368
Job Location: INpolis, IN
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012c05AAA&URLSource=cjhunter

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

Aircraft Painter - SMC-N/A

Description:
PDS Tech is seeking an Aircraft Painter for an open position in San Antonio, TX.
In your role, you will:

  • Assist in the preparation of aircraft and major assemblies for de-painting to remove finish coats, insignias, numerals and lettering. Assist in the preparation of exterior/interior surface and major assemblies for prime and finish coats as well as insignias, numerals and lettering.
  • Help detect report and treat corrosion prior to painting procedure for development and modification of aircraft in accordance with DOD, manufacturer, company, supplier and other directives.
  • Responsible for complying with all rules and regulations concerning health and safety, tool control, FOD, contracts, facilities, housekeeping, inventory control and other pertinent coverages.
  • Performs other duties as directed by supervision and management for the benefit of the company, program, and employee(s).

As our ideal candidate, you will meet the following requirements:
  •     *1)     Able to read and interpret technical orders, blueprints, engineering orders, manufacturer procedures and planning documents to paint/de-paint/corrosion control process, mixing instructions/formulas, hazardous waste disposal instructions and other job related information.
    *2)         Able to setup, operate, and clean paint/de-paint and corrosion control equipment and tools such as: Media blast, high pressure sprayers, brushes, hand sanders, scrapers, electrostatic paint guns, HVLP spray guns, weight scales, rollers, templates, stencils, hot glue guns, etc.
    *3)         Able to perform chemical metal cleaning, treating, and alo-dining.
    *4)         Able to calculate chemical stripping rate and process time required for parts and assemblies. Chemically strip parts as required and use progressive chemical stripping techniques by brushing, spraying and removing solution from parts; check parts for rate of stripping and dimensional accuracy.
    *5)         Able to setup and operate abrasive equipment for hangar and booth operations, glass bead shot peen equipment, accessories and portable abrasive equipment.
    *6)         Able to direct an abrasive stream to clean surfaces, examine parts to determine extent of cleaning operations, adjust air pressure, mixture of air and abrasives, ensure proper angle and distance, dwell time, sweeping directions and replace abrasive media as required.
    *7)         Able to prepare, mix and apply gloss paints, paint, lacquers, sealers, to aircraft, parts and assemblies.
    *8)         Able to sand, wash, prepare surfaces, mask and apply prime and finish coats to interior and exterior surfaces of aircraft, parts and assemblies; blend paint, apply stripes and bands, insignias and lettering with shop aids such as templates and stencils.
    *9)         Able to fabricate stencils and templates.
    *10)       Able to operate boom lifts and scissor lifts.
    *11)       Able to load and unload painted assemblies and parts onto paint racks and transportation devices.
    *12)       Able to effectively communicate, orally and written, with other employees, members of supervision, and others, as required in their duties.
    *13)       Able to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.
    *14)       Able to perform assigned duties while wearing required safety equipment.
    *15)       Able to perform assigned duties on all shifts without encumbrances due to weather or physical location and conditions.
     

 
Job Number: 1710074174
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023I91AAE&URLSource=cjhunter

Aircraft Painter - Secret

Description:
PDS Tech is seeking an Aircraft Painter for an open position in Jacksonville, FL.
In your role, you will:
  • Apply primer and finish coats, including stripping and other detail work. Touch up primer and finish coats, including color matching and blending.
  • Lay out paint schemes and design templates.
  • Apply markings to parts and aircraft using several methods including silk screens and maskant aids.
  • Designs templates.
  • Work from detailed blueprints, fabrication, assembly outlines, sketches, patterns, and written or verbal instructions to plan material requirements, the sequence of operations and fabricate to predetermined configurations.
  • Set up and operate such typical shop equipment as paint mixers, steam cleaner power washers, Positector or other paint measuring equipment, stencil maker, ID printers, and other general shop equipment and tools to complete work assignments.
  • Estimate labor and material costs of aircraft painting according to customer specifications.
  • Develop application plans and methods.
  • Provide guidance and training to new or lesser skilled paint operation personnel.
  • Perform work in both FOD critical and FOD sensitive environments, ensures all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
  • Check units for compliance using hand held precision measuring equipment, such as wet gauges and scales.
  • Report all non-conformances to manufacturing supervision or corrective action representative.
  • Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality

As our ideal candidate, you will meet the following requirements:
  1. Knowledgeable and skilled in painting processes and techniques and common shop practices.

  2. Knowledgeable and able to interpret blueprints, sketches and written and verbal instructions.

  3. Knowledgeable and able to apply shop math.

  4. Knowledgeable and able to use computer systems for office and shop applications.

  5. Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and
      assisting  others in completion of tasks.


  6. Able to meet the physical requirements to be certified by Environmental Health & Safety (EHS) to use a respirator.

  7. Able to complete and maintain all required training and certifications needed to do your job efficiently.

  8. General knowledge of PMB media cleanliness requirements.

  9. Thorough understanding of blasting parameters, permissible substrates.

  10. Specific knowledge of the process for protecting parts from media ingress.

  11. Ability to recognize and avoid improper techniques which may result in damage to blasted substrate surfaces.

  12. Knowledge of personal protective equipment requirements required by both painting and de-painting operations

  13. Security clearance is required for this position.
 
 
Job Number: 1710076408
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NNxAAM&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking a RS Acft Painter I  for an open position in Savannah, GA.

Position Purpose:



The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 

Principal Duties and Responsibilities 

Essential Functions: 1. Mask, sand, and prepare aircraft for paint application. 2. Apply glazing and sealing compounds in preparation for final painting. 3. Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 4. Perform leading edge sealant work in final detail. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP). 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned. 2. Comply with Paint shop standard practices. 3. Perform other duties as required. 

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Able to pass Pulmonary Function Test to obtain respirator certification. 4. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift. 5. Must be computer literate.



Languages Required (in addition to English): No Selection



 

Education and Experience Requirements:



High school diploma/GED. One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com
 
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.



 

 
Job Number: 1710077095
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PNUAA2&URLSource=cjhunter

Aircraft Painter I

Description:
The Aircraft Painter I will prepare the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.
Essential Functions:
1. Mask, sand, and prepare aircraft for paint application.
2. Apply glazing and sealing compounds in preparation for final painting.
3. Operate and maintain all types of preparation and priming equipment. Mix paints and primers.
4. Perform leading edge sealant work in final detail.
5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP).
Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned.
2. Comply with Paint shop standard practices.
3. Perform other duties as required.
 
Education and Experience Requirements:
High school diploma/GED. One (1) year of painting experience. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).
 
1. Ability to read, write, speak, and understand the English language.
2. Ability to read and interpret blueprints and engineering documentation.
3. Able to pass Pulmonary Function Test to obtain respirator certification.
4. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work,
work in small spaces lift up to 40 pounds and work any shift.
5. Must be computer literate.
Shift:  To be determined by hiring manager but 2 options - (Mon-Thur 5am-3:30pm) or (Mon-Fri 6am-2:30pm)


 
 
Job Number: 1710070095
Job Location: Appleton, WI
Duration: 24 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CpfFAAS&URLSource=cjhunter

Aircraft Painter II

Description:
The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.
 
Principal Duties and Responsibilities:

Essential Functions:
1. Safely performs aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.

2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools.

3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required.

4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.

5. Use the material tracking system to create parts demand, track squawks and to sign-off work.

6. Assist with aircraft movement in hangars.

7. Offer continuous improvement ideas/participate in continuous improvement activities.
 
High school diploma/GED. Valid Drivers License required. 
Two (2) years of experience in related paint processes.
Aircraft industry experience preferred. 
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

1. Ability to read, write, speak, and understand the English language.
2. Able to use tools and equipment associated with the aircraft painting process.
3. Ability to read and interpret blueprints and engineering documentation.
4. Able to pass Pulmonary Function Test to obtain respirator certification.
5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
6. Must be computer literate.
 
 
Job Number: 1710073599
Job Location: Westfield, MA
Duration: 24 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GoaAAE&URLSource=cjhunter

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B6tAAE&URLSource=cjhunter

Aircraft Painter-1st Shift

Description:
Position Purpose:
The Aircraft Painter I preps the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.
Principal Duties and Responsibilities:
Essential Functions:
1. Mask, sand, and prepare aircraft for paint application.
2. Apply glazing and sealing compounds in preparation for final painting.
3. Operate and maintain all types of preparation and priming equipment. Mix paints and primers.
4. Perform leading edge sealant work in final detail.
5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP).

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned.
2. Comply with Paint shop standard practices.
3. Perform other duties as required.
 
Education and Experience Requirements:
High school diploma/GED. One (1) year of painting experience. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).
Unique Skills:
DA sanding and or Detailing hand on painting blends, buffing, etc.
Other Requirements:
1. Ability to read, write, speak, and understand the English language.
2. Ability to read and interpret blueprints and engineering documentation.
3. Able to pass Pulmonary Function Test to obtain respirator certification.
4. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces, lift up to 40 pounds and work any shift.
5. Must be computer literate.
 
 
Job Number: 1710077677
Job Location: Appleton, WI
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Qv7AAE&URLSource=cjhunter

Aircraft Performance Engineer

Description:
PDS Tech is seeking an Aircraft Performance Engineer for the Flight Dynamics Group, Regional Jet Development Project.

This position is located in Nagoya, Japan. However, engineers maybe requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.

The main scope is to work on activities to support the 25.1309 documentation, analysis and certification of aircraft performance under management. This will include interfacing with all other aircraft functions, engineering teams and AeroTEC members* to coordinate and obtain the approval of any task assigned contributing to the aircraft. If requested, the responsible engineer will also work for any other duties performance has such as flight test related activities, development of manuals (AFM, FCOM, MEL and CDL) and CAFM, and performance analysis. * AeroTEC is a subcontract for flight test and reporting activities.

Scope of Work:
(1) will work as a team member of Performance Team in Flight Dynamics Group.

(2) Basic work scope is to develop and finalize aircraft T/C design with minimizing performance penalty, compliant to all applicable Requirements, focusing primarily on FAR/CS Subpart B and 25.1309.
(3) This activity includes;



(a) Identify failure conditions which affect the aircraft performance from SFHA.
(b) Aircraft performance investigations.
(c) Define means of compliance for each failure condition.
(d) Prepare the certification documents and may be requested to coordinate with authority (JCAB, EASA, FAA) 2/2



(4) All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(5) Other scopes (if requested) include helping duties performance has such as flight test related activities (data analysis, modeling, report), development of manuals (AFM, FCOM, MEL and CDL) and CAFM, analysis of aircraft performance considering engine or brake performance.
 



 
Job Number: 1710076141
Job Location: Nagoya,
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MoDAAU&URLSource=cjhunter

Aircraft Seat Inspector

Description:
PDS Tech is seeking Aircraft Seat Inspector for open positions Atlanta, GA


  • Primary Duties:
    Perform in-process inspections, final inspections and return to service.  Must be proficient in Microsoft Office.  Must be FAA certified (A&P license) or eligible for a Repairman Certificate.  Avionics background is a plus.

     

Basic Qualifications:
  • Must be FAA certified (A&P license) or eligible for a Repairman Certificate
  • Knowledge of basic hand tools, i.e.
  • Avionics background is a plus.
  • Knowledge of applicable power tools.
  • Completion of seven (7) required safety courses: Respiratory Training, Injury Prevention Program, Emergency Action Plan, Blood borne Pathogens, Hazardous Communication, Lock Out Tag Out, Ergonomics.
  • Email resumes to rkinlaw@pdstech.com

 
Job Number: 1710068367
Job Location: Atlanta, GA
Duration: 3 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012c00AAA&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structures Assembler - SC

Description:
Chipton-Ross is seeking 5 Aircraft Structures Mechanics located in Ladson, SC.

Job Summary
Responsible for repairing, installing, and assembling components for aircraft. Perform subassembly, fit parts.
Primary responsibilities
- Assemble and fit aircraft structural parts.
- Precision drilling, reaming, and countersinking in composite is a MUST
- Rivet and fastener and aircraft structural parts.
- Liquid shim and sealant application.
- Remove and install aircraft system components.
- Perform repairs as needed.
- Use and interpret company drawings, diagrams and manuals.
- Manufacture, modify, and repair sheet metal and composite parts.
- Create structures, skins, and panels to exact tolerances.
- Perform composite component fabrication and repair.
- Create metal-to-metal and metal-to-composite structural adhesive bonding preparation to product specifications.
- Align, fit, assemble, connect, or install components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Adjust, repair, rework, or replace parts and assemblies.
- Layout and mark reference points.
-MUST BE AVAILABLE FOR ANY SHIFT
-TRAINING WILL BE ON FIRST SHIFT


 
Job Number: 165678
Job Location: Ladson, SC
Rate: $30 to $35.00 DOE
Duration: 3 months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Aircraft Systems Engineer

Description:
We need two contract system design engineers to support our program. 

The primary task of this role will be to develop, design and qualify integrated mechanical, pneumatic, and electrical systems to enhance and improve the spaceship and carrier vehicles systems. Knowledge of the design life cycle process from requirements definition to vehicle qualification is a plus.  Competency in first order design and analysis principles and CATIA or equivalent is a must. The job will also involve reviewing the existing prototype designs and test data and identify areas for development or further testing.



  • Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
  • Develops and refines system level requirements for vehicle systems based on customer and implied requirements
  • Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
  • Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
  • Supports review of manufacturing plans and procedures to ensure compliance with design requirements
  • Supports the creation of system test plans which will be used to verify the design intent meets requirements
  • Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


 



What you bring



  • B.S. degree in Mechanical, Aerospace, or similar discipline is required
  • 2-5 years of relevant industry experience;
  • Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
  • Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
  • Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
  • Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
  • Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
  • Strong team player and ability to work independently with excellent organizational and problem-solving skills
  • Knowledge and experience with AS9100 a plus
  • Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
  • Experience with manufacturing based ERP systems a plus
  • Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)



 
Job Number: 1710073720
Job Location: Mojave, CA
Duration: 9 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023H3fAAE&URLSource=cjhunter

Aircraft Technician

Description:
Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.
Principal Duties and Responsibilities:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. 2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. 3. Ensure that all work accomplished meets quality standards and specifications. 4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. 5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) 6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. 7. Provide training to less experienced technicians. 8. Protect customer property (PTP).
 
Additional Functions: 1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility. 3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. 4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. 6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 7. Perform other duties as assigned.
 
Education and Experience Requirements:
High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.
Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
 
Job Number: 1710077593
Job Location: Westfield, MA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QdpAAE&URLSource=cjhunter

Aircraft Technician

Description:
General Summary: 
The Aircraft Technician works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems.
 
Duties and Responsibilities:
  1. Performs scheduled and unscheduled inspections, maintenance, and repair of airframe and powerplant systems and components per acceptable methods, techniques, and practices. 
  2. Documents work performed in accordance with Regulatory and Repair Station/Quality Manual policies and procedures.
  3. Demonstrates proficiency with the methods, techniques, practices, tools, and equipment used during aircraft maintenance.
  4. Identifies, protects, and preserves piece parts and articles undergoing maintenance in accordance with RSM/QCM and company policies and procedures.
  5. Assures parts, products and materials that are installed meet regulatory requirements.
  6. Performs assigned work in a safe effective manner while practicing good housekeeping in accordance with company and regulatory requirements.
  7. Provides detailed turnovers when maintenance is left unfinished prior to shift changes 

Education, Work Experience, Certification and/or Licensure:
  1. High School degree or equivalent required.
  2. Experience in FAR Part 145 Repair Station environment maintaining general and/or business/corporate aviation aircraft.
  3. A&P Certification required in accordance with 14 CFR Part 65 from a FAR Part 147 School.
  4. Current passport and driver’s license or ability to obtain both.
  5. Experience with 14 CFR Part 43 required.
  6. Familiarization with 14 CFR Parts 91,135, and 145 preferred.
     

Knowledge, Skills and Abilities:

  1. Working knowledge of maintenance software (i.e. Quantum, Corridor, and/or SAP), Windows operating systems and Microsoft office products.
  2. Thorough knowledge of aircraft maintenance requirements and inspection procedures and practices.
  3. Excellent oral and written communication skills.
  4. Strong attention to detail and accuracy.
  5. Ability to work under pressure including time constraints and challenging situations.
  6. Ability to read work orders, blueprints, diagrams, manuals and process specifications, follow sequence of planned operations.
  7. Ability to work extended hours and travel to off-site locations requiring overnight stays with little notice as required.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties.

Pull, push, carry, lift or move materials/people/items/equipment weighing 50 lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties
 
Job Number: 1710069936
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CoeOAAS&URLSource=cjhunter

Aircraft Technician A (Blades)

Description:
PDS is seeking an Aircraft Technician for an open position in Grand Prairie, TX.
In your role you will:

Job Details:

Primary Responsibilities



  • Perform fabrication, repair and/or modification of aircraft rotor blades working from three-dimensional blueprints, sketches, diagrams and other similar documents or sources. 
  • Weigh, measure and mix resins, coloring agents and catalyst in accordance with established formulas. 
  • Layout and cut fabrics using cutting patterns or scale. 
  • Apply compound on form manually and position fabric on compound. 
  • Use squeeze tool to remove air pockets and lumps to shape and obtain a smooth surface. 
  • Apply additional layers of compound and fabrics to build up required number of layers. 
  • Sand contoured surfaces to finish molded accessories using handtools and select other abrasive tools according to operation and dimensions specified. 
  • Visually and tactually inspect surfaces for flaws and smoothness.
  • Maintain close working relationship with assigned lead regarding schedules, priorities, availability of parts, supplies and tools.
  • Use various hand tools, power equipment, measuring devices, test equipment, and paint equipment and instructions as required.
  • Ensure compliance with company and customer specifications and FAA regulations as required.
  • Complete forms and records pertaining to completion of assigned work.
  • Maintain responsibility to keep scrap at minimum levels.
  • This position description is not intended to be all-inclusive and employee will also perform other tasks as assigned.



 

Education



  • HS diploma or equivalent.
  • Some trade school desirable.
  • An A&P or FCC license is desirable as applicable.


 



Experience Minimum of 4 years related experience (fiberglass/composite/bonding/blades); some experience may be substituted for education normally acquired in the attainment of an A & P or FCC license.


 
Job Number: 1710072992
Job Location: Grand Prairie, TX
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Ei9AAE&URLSource=cjhunter

Airframe Design Engineer

Description:
We have an exciting opportunity for an Airframe Engineer within the Airframe Design Group..
This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA.
Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project.  Establish and communicate clear task expectations.  Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:

  • Able to self-prioritize tasks. Works under general direction
  • Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
  • Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer. 
  • Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
  • Conduct periodic design reviews as required to ensure designs meet the requirements.
  • Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
  • Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines. 
  • Prepare PowerPoint presentations to support Program PDRs and CDRs. 
    Provide technical support and mentorship to those less experience members of the team.

QualificationsEssential Qualifications
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.

Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required.
A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional QualificationsTypically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable. 

Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired. 

Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace. 

Experience with NX and FiberSIM

 
Travel Percentage Required0% - 25%


 
Job Number: 1710076868
Job Location: San Diego, CA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023ORYAA2&URLSource=cjhunter

Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
160536/14657
Title Airframe Design Engineer
55/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 55/hr max
Duration: 6 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

Assembler

Description:
Our client in Pinellas Park is seeking for 25 Assemblers for a contract to hire position

•    MUST HAVE 1 - 2 years of sheet metal assembly experience (aircraft sheetmetal structure experience is required.
  • Previous experience as an Assembler and/or Aircraft Structures Mechanic is required.
  • Previous Aircraft structure on the F-16 and F-35 is highly preferred.

•    Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.

Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and sub-assembly components. Assemblies can require controlled tooling as well as build to print. Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.
For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 


 
  • High School Diploma or equivalent.
  • Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
  • Competently uses computers and other systems to access, maintain and manipulate data. 



For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710069900
Job Location: Pinellas Park, FL
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CoV7AAK&URLSource=cjhunter

Assembly Tech Wheel and Brake Shop

Description:
PDS Tech, Inc. is seeking an Assembly Technician for an open position in Dallas, TX
Description:

Role and Responsibilities:
****FAA/DOT/Safety Sensitive Position****

  • The Assembly Tech I, disassembles, cleans, and assembles aircraft wheels, brakes, batteries and/or hose assemblies to product specifications and uses hand tools and small power tools to assemble units..



     



  • Receives and prioritizes orders; reserves materials; assembles product. 



  • Creates and closes work orders; answers calls; assists other technicians as needed. 



  • Order entry into system; updates as needed. 



  • Prepares and ships materials (hazardous and/or non-hazardous).



  • Completes special projects and other duties as assigned.




 
Qualifications and Education Requirements:
REQUIRED
  • H. S. Diploma  or  Equivalent
  • Aviation experience or Minimum 2 years of Mechanical experience
  • Ability to use various hand Tools
  • General electrical/mechanical experience in the aviation industry

 
 
Job Number: 1710074066
Job Location: Dallas, TX
Per Diem: No
Duration: 2 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HmcAAE&URLSource=cjhunter

Automated Autoclave Operator Grade 11

Description:
PDS Tech, Inc is seeking a candidate for the Automated Autoclave Operator Grade 11 position located El Segundo, CA.  
  • Sets up and operates to full capacity with direction from a supervisor or leadman, automated autoclaves, related subsystems to perform graphite bonding operations of aircraft panels, metallic, nonmetallic flat, contoured, honeycomb parts and assemblies.
  • Monitors automated gas accumulator bleed-offs, cooling tower water levels, and performs other related duties consistent with the level of difficulty described above.
  • Participates in loading and unloading of autoclave. connects thermocouples.
  • Vacuum lines, arranges proper placement of parts, tools on racks and inside autoclave; operates forklift checks for and corrects with some directions, any leaks in vacuum bags, hoses, and/or equipment, verifies proper vacuum bag installation and general condition prior to closing autoclave door; closes powered interlocking doors and monitors all instruments, switches, recorders during pressurization, heat-up bonding cycle, cool down and depressurization.


 

Basic Qualifications: High School Diploma/GED plus 5 years of experience.



Need to be able to climb on racks and hook up vacuum hoses and TC's.\



 



Machinist should be focused on details and experienced with low tight tolerance measurements. Must also carry high standards of cleanliness and using best shop practices for Safety, Quality, Schedule and Cost measures. 




Preferred Qualifications: Knowledge of creating recipes


 
Job Number: 1710076024
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MYhAAM&URLSource=cjhunter

Automated Autoclave Operator Grade 11

Description:
PDS Tech, Inc is seeking a candidate for the Automated Autoclave Operator Grade 11 position located El Segundo, CA.  
  • Sets up and operates to full capacity with direction from a supervisor or leadman, automated autoclaves, related subsystems to perform graphite bonding operations of aircraft panels, metallic, nonmetallic flat, contoured, honeycomb parts and assemblies.
  • Monitors automated gas accumulator bleed-offs, cooling tower water levels, and performs other related duties consistent with the level of difficulty described above.
  • Participates in loading and unloading of autoclave. connects thermocouples.
  • Vacuum lines, arranges proper placement of parts, tools on racks and inside autoclave; operates forklift checks for and corrects with some directions, any leaks in vacuum bags, hoses, and/or equipment, verifies proper vacuum bag installation and general condition prior to closing autoclave door; closes powered interlocking doors and monitors all instruments, switches, recorders during pressurization, heat-up bonding cycle, cool down and depressurization.


 

Basic Qualifications: High School Diploma/GED plus 5 years of experience.



Need to be able to climb on racks and hook up vacuum hoses and TC's.




Preferred Qualifications: Knowledge of creating recipes.


 
Job Number: 1710076016
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MXyAAM&URLSource=cjhunter

Automated Autoclave Operator Grade 8

Description:
PDS Tech, Inc is seeking a candidate for the Automated Autoclave Operator 8 position located in El Segundo, CA.  
Sets up and operates to full capacity with direction from a supervisor or leadman, automated autoclaves, related subsystems to perform graphite bonding operations of aircraft panels, metallic, nonmetallic flat, contoured, honeycomb parts and assemblies.
Monitors automated gas accumulator bleed-offs, cooling tower water levels, and performs other related duties consistent with the level of difficulty described above.
Participates in loading and unloading of autoclave.
Connects thermocouples.
Vacuum lines, arranges proper placement of parts, tools on racks and inside autoclave; operates forklift checks for and corrects with some directions, any leaks in vacuum bags, hoses, and/or equipment, verifies proper vacuum bag installation and general condition prior to closing autoclave door; closes powered interlocking doors and monitors all instruments, switches, recorders during pressurization, heat-up bonding cycle, cool down and depressurization.
 

Basic Qualifications: High School Diploma/GED plus 2 years of experience.



Need to be able to climb on racks and hook up vacuum hoses and TC's.




Preferred Qualifications: Knowledge of creating recipes.


 
Job Number: 1710076019
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MYDAA2&URLSource=cjhunter

Automated Autoclave Operator Grade 8

Description:
PDS Tech, Inc is seeking a candidate for the Automated Autoclave Operator 8 position located in El Segundo, CA.  
Sets up and operates to full capacity with direction from a supervisor or leadman, automated autoclaves, related subsystems to perform graphite bonding operations of aircraft panels, metallic, nonmetallic flat, contoured, honeycomb parts and assemblies.
Monitors automated gas accumulator bleed-offs, cooling tower water levels, and performs other related duties consistent with the level of difficulty described above.
Participates in loading and unloading of autoclave.
Connects thermocouples.
Vacuum lines, arranges proper placement of parts, tools on racks and inside autoclave; operates forklift checks for and corrects with some directions, any leaks in vacuum bags, hoses, and/or equipment, verifies proper vacuum bag installation and general condition prior to closing autoclave door; closes powered interlocking doors and monitors all instruments, switches, recorders during pressurization, heat-up bonding cycle, cool down and depressurization.
 

Basic Qualifications: High School Diploma/GED plus 2 years of experience.



Need to be able to climb on racks and hook up vacuum hoses and TC's.




Preferred Qualifications: Knowledge of creating recipes.


 
Job Number: 1710076020
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MYIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Cargo Supervisors - Hebron, KY

Description:
STS AeroStaff Services is hiring Aviation Cargo Supervisors in Hebron, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This is a position for a working Supervisor repairing Aviation Cargo Containers and Metal Pallets.

Job Duties:

• Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
• Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
• Comply with FAA and company policies and procedures
• Ensure accurate and timely completion of work orders
• Ability to perform routine and non-routine tasks independently
• Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
• Maintain safe and clean work environment
• Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
• Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
• Provide feedback/suggestion to improve customer satisfaction

Qualifications:

• 3-5 years’ supervisory experience is required
• Aviation experience is not required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39799
Job Location: Hebron, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Induction Engineers - Las Vegas, NV

Description:
Now Hiring Aviation Induction Engineers!

Overview:

STS AeroStaff Services is now offering Aviation Induction Engineer jobs in Las Vegas, Nevada. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Las Vegas, Nevada; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aviation Induction Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

Will be supporting client’s engineering activities for some used aircraft that will be inducted into client’s fleet.

Essential Duties & Responsibilities:

• Will be reviewing the existing aircraft configuration, determining which mods/SBs/ADs need to be embodied during the induction check, and generating the associated engineering documentation

Qualifications:

• The ideal candidate would be well versed in Airbus A320 family avionics and/or systems OR interiors
• A bachelor's degree in Aerospace, Electrical or Mechanical Engineering is required
• Previous airline or MRO engineering experience with Airbus aircraft
• Must be able to read and interpret technical drawings and related information. (e.g. wiring diagrams)
• Should have the ability to effectively generate detailed engineering documents
• Should have the ability to interpret analytical reports, FARs, ADs and other engineering documents/drawings
• Must be able to make sound engineering decisions and develop the documentation to support these decisions

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40596
Job Location: Las Vegas, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Technical Writers - Atlanta, GA

Description:
Now Hiring Aviation Technical Writers!

Overview:

STS AeroStaff Services is now offering Aviation Technical Writer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best technical writer jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as n Aviation Technical Writer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Responsibilities:

• Responsible for the research and documentation of all technical data necessary to create and/or modify work documents used to control, route, process, and record work accomplished for the calibration of aircraft related equipment, calibration standards and calibration equipment and other items to be repaired, fabricated or calibrated
• All documents must be compliant with both internal and external policies and procedures, i.e. Federal Aviation Regulations (FARs), Federal Aviation Administration (FAA), Maintenance Programs, etc.
• The work documents must provide a smooth process flow as directed by local supervision while maintaining compliance and be completed in a timely manner
• Communicate with customers to address concerns with work documents
• Safety conscious behaviors must be considered and practiced in all operational processes and procedures

Qualifications:

• Minimum of 5 years’ in the aviation maintenance environment or equivalent training and experience
• Airframe and Powerplant license and/or technical degree preferred
• Engine and/or component repair/overhaul, or calibration technician experience preferred
• Thorough knowledge and understanding of engine, component and aircraft repair manuals, Illustrated Parts Catalog (IPC)/Illustrated Parts List (IPL), and manufacturer standard practice manuals
• Must be able to interpret engineering documents/drawings, analytical reports, and Federal Aviation Regulations and Airworthiness Directives
• Process improvement and problem solving background with strong analytical skills desired
• Excellent written and oral communication skills required
• Strong computer skills required with experience in MS Office products required including Word, Visio, and Access. Strong Adobe Professional skills required
• Must be able to perform under pressure with minimum supervision

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40540
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Technical Writers - Dallas, TX

Description:
Now Hiring Aviation Technical Writers!

Overview:

STS AeroStaff Services is now offering Aviation Technical Writer jobs in Dallas, Texas. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best technical writing jobs in Dallas, Texas; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aviation Technical Writer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

Technical Writers are responsible for managing, revising, and producing aircraft maintenance manuals and documents used for maintaining the fleet; while ensuring safe, consistent, standardized, clear, accurate and compliant work instructions; meeting deadlines and the needs of Production, Engineering, Planning, Maintenance Programs, Reliability, Quality Control and Regulatory personnel.

Essential Duties & Responsibilities:

• Creates, writes, revises, edits and publishes maintenance publications, documents, and work instructions ensuring accuracy to regulatory, and maintenance program requirements, and to technical sources or approved changes
• Processes OEM revisions to Aircraft Maintenance Manuals, Illustrated Parts Catalogs, Fault Isolation manuals, Wiring Diagram manuals, and other publications and documents - reconciling the differences with engineered changes and managing the approvals necessary for publication
• Receives and/or submits, and processes document change requests for Maintenance Publications and documents, and Submits Publication Change Requests to correct errors
• Assists Technical Writers and Technical Publications Specialists in maintaining historical record of revisions, network library, and published documents, and assists with required audits, publishes, distribution, and record-keeping
• Interfaces with various M&E departments for continuous analysis and improvements of the maintenance program, publications, documents and processes including Production AMTs and Inspectors, Fleet Leads, Engineering, Planning, Regulatory, Quality, Central Publications, and any other department necessary

Qualifications:

• High school diploma or equivalent required
• Aviation-related (maintenance or engineering) 4 year degree preferred
• 3 years’ minimum aircraft maintenance experience required
• Transport category Boeing 737 experience is preferred
• 3 years’ minimum technical writing experience required. Aviation-related technical writing preferred
• 1 year minimum experience with Adobe FrameMaker, Arbortext, or other SGML or XML based authoring program required
• Expert in MS Word, Excel, and Access preferred
• Experience with Corel Draw, Iso Draw, or other Illustration editing tools preferred
• Airframe and Powerplant Certificate (A&P) or 5 years’’ equivalent maintenance experience (military or transport category) required
• Must be able to comply with Company attendance standards as described in established guidelines
• Must have excellent writing and editing skills
• Must have excellent organizational skills and the ability to prioritize and complete multiple tasks and projects under tight deadlines
• Must be able to type 50 wpm and have excellent computer skills, with an ability to learn new programs quickly
• Must have excellent research, writing, and verbal communication and presentation skills
• Must be able to read and understand aircraft maintenance manuals, work instructions, policy and regulatory publications
• Must possess excellent attention to detail, problem-solving skills, and ability and desire to deal with technology concepts
• Must be able and willing to travel and represent at industry meetings and conferences
• Must be able to use personal computer and desktop publishing equipment for extended periods of time
• Must be able to access all sections of company aircraft, climb ladders/stands
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40500
Job Location: Dallas, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/01/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics

Description:
PDS Tech, Inc. is seeking a Avionics for an open position in Huntsville, AL.
  • Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
  • Define, develop and document specifications, and qualify integrated system solutions for military and/or commercial aircraft.
  • Participate in technical reviews of military and/or commercial avionics systems. 

Experience Required: 
  • Familiarity with DO-178 Software Certification and/or DO-254 Electronics Hardware Certification. 
  • Working knowledge of EVMS / Control Account Management. 
  • WORD, EXCEL, PowerPoint, VISIO, DOORS. 

 
Job Number: 1710077408
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QJ6AAM&URLSource=cjhunter

Avionics

Description:
PDS Tech, Inc. is seeking a Avionics for an open position in Huntsville, AL.
  • Supports, performs and manages development, design, integration and test function and project teams of Avionics systems, including electronics, SW, etc.
  • Specific tasks include: aircraft system specification analysis, requirements allocation to components, avionic system detailed design and development, system integration, laboratory verification, requirements based verification testing and helicopter flight testing. 

  • Minimum BS degree in Aeronautical, Aerospace, Software, Electrical Engineering or Computer Science. 
  • A minimum of 2 – 5+ years of avionics experience required. 
  • Aviation Systems and Equipment experience required.
  • Excellent written and oral communication, presentation, interpersonal and organizational skills are required.
  • Proven structured, team-oriented problem solving skills.
  • A strong, hands-on approach to solving problems. 

 
Job Number: 1710077334
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Q8NAAU&URLSource=cjhunter

Avionics

Description:
PDS Tech, Inc. is seeking a Avionics for an open position in Shelton, CT.
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost. 

Position Roles & Responsibilities: 
  • Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details. 
  • Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA. 
  • Work closely with various design groups to coordinate designs and establish aircraft interfaces. 
  • Work closely with aircraft final assembly shop personnel. 
  • Work closely with various suppliers. 

Experience Required: 
  • Minimum of a BS in Engineering Design required 
  • High level communications skills both written and oral. 
  • In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality. 
  • Experience with Catia V5 Tubing function. 

 
Job Number: 1710074771
Job Location: Shelton, CT
Duration: 20 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Jo3AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics & Test Equipment Engineers - Many Needed **HOT**

Description:
**Must have active secret clearance & Engineering Degree
*Experience in weapon system avionics, simulation, modeling, or test equipment avionics development
• Avionic sub system, principles, architectures and, RF compatibility concepts
• Electronic/electrical system/component operating principles and performance
• Interface definition and management
• Writing aircraft and /or avionics requirements
• Open Mission Systems (OMS) architecture and UCI messaging experience
• Data Link experience including Link-16
• Sensor integration experience with Radar, EW, or EO/IR sensors
• Cyber security experience
• Weapons integration experience
Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Test
Job Location: St. Louis, MO
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/06/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Avionics / Elec Techs

Description:

 PDS TECH INC is currently looking for an Avionics Techs for our Long Beach customer.


If you are interested and available, please call 1-800-234-8644 x 20210
Send resume to: KPelonis@pdstech.com


Education and Experience Requirements:


High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


Position Purpose:



Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:
1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
10. Adapt to sudden schedule changes. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned. 

Other Requirements:
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




 



 



 
Job Number: 1710075181
Job Location: Long Beach, CA
Per Diem: No
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Kv8AAE&URLSource=cjhunter

Avionics / Elec Techs

Description:

 PDS TECH INC is currently looking for 4 Avionics Techs for our Long Beach customer.
2 on 1st shift and 2 on 2nd shift

If you are interested and available, please call 1-800-234-8644 x 20210
Send resume to: KPelonis@pdstech.com


Education and Experience Requirements:


High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


Position Purpose:



Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:
1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
10. Adapt to sudden schedule changes. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned. 

Other Requirements:
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




 



 



 
Job Number: 1710067142
Job Location: Long Beach, CA
Per Diem: No
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mnUAAQ&URLSource=cjhunter

Avionics Consulting DER

Description:
PDS is seeking an Avionics Consulting DER for an open position in Wichita, KS.
Make compliance findings and represent the company as a subject matter expert to certification authorities, suppliers, and industry consortiums in the area of avionics systems approvals supporting aircraft Type Certification for both foreign and domestic certification activities on 14 CFR Part 23/25 aircraft

In your role, you will:
  • Responsible for design, development and certification support of avionics systems on Citation aircraft. 
  • Prepare and/or approve certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23/25. 
  • Reviews engineering drawings for avionics systems prepared using computer based drafting tools (IAI HarnesSys, CATIA/CCD and /or CATIA V5). 
  • Evaluate and analyze avionics systems design for completion of function hazard assessments and system safety assessments.
  • Assist in development of functional test documents for avionics systems.
  • Witness equipment, system, and aircraft ground testing at Cessna, Supplier or other testing facilities.
  • Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
  • Coordinate with FAA personnel and other Cessna Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety.

Qualifications
QUALIFICATIONS/EDUCATION/SPECIAL REQUIREMENTS:

  • Minimum of 5 years avionics system design integration experience to the requirements of 14CFR Parts 23/25 is required for applicants meeting the education requirements above.Minimum of 9 years avionics system design integration experience for those not meeting the education requirements.
  • Must have 2 years prior certification experience with Federal Aviation Regulations 14 CFR Part 23/25 as an Avionics Systems DER, DOA AR or ODA Unit Member.
  • Experience with the application of RTCA DO-160, DO178 and DO-254 relative to avionics systems certification on aircraft is required.
  • Electronic drafting experience with IAI HarnesSys and/or CATIA/CCD is desired.
  • Experience with the System Safety certification process per SAE ARP4754 and ARP4761 is desired.
  • Must be able to coordinate, communicate and develop good working relations with FAA specialists.
  • Experience with use of electronic test equipment is desired.
  • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is desired.

Education:         
B.S. or advanced degree from an ABET accredited institution in Computer, Electrical Engineering or Engineering Technology is preferred.  Will consider applicants with 14 CFR Part 23/25 DER/DOA AR/ODA Unit Member avionics certification experience in lieu of a degree
 
For immediate consideration send your resume to cecjwichita@pdstech.com or
Call 316-729-1800 today!!

 
Job Number: 1710073247
Job Location: Wichita, KS
Per Diem: Yes
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jorge Garcia
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FskAAE&URLSource=cjhunter

Avionics Design and Analysis Engineer- Secret

Description:
PDS Tech is seeking a Design & Analysis Engineer for an open position in Berkeley, MO
In your role, you will:


On our team, you will perform hands-on functional requirements development, interface definition, oversee supplier design and development, and conduct system level compliance tests. Avionics development projects include data links, sensors, mission processors, fire control, and training simulators.



Opportunities exist to develop high speed processors and networks, wide bandwidth data links, full motion video, multi spectrum sensors, weapon control hardware and flight simulators.
 
A bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace Engineering or equivalent. ABET is the preferred, although not required, accreditation standard.



A minimum of 3 years’ experience in the development and test of avionics systems.



• Avionic sub system, principles, architectures and, RF compatibility concepts 

• Electronic/electrical system/component operating principles and performance

• Interface definition and management 

• Writing aircraft and /or avionics requirements 

• Open Mission Systems (OMS) architecture and UCI messaging experience

• Data Link experience including Link-16

• Sensor integration experience with Radar, EW, or EO/IR sensors

• Cyber security experience

• Weapons integration experience
 
Job Number: 1710075872
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MI5AAM&URLSource=cjhunter

Avionics Installer I

Description:
PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 
 

Education and Experience Requirements: 
High School diploma/GED. General knowledge of applicable regulatory requirements and customer specifications.
Must know how to use a multimeter.
Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.

Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710074182
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023I9zAAE&URLSource=cjhunter

Avionics Systems Development Engineer 2 - 372918 - (10 OPENINGS)

Description:
**Active Secret Clearance or Active Interim Secret Clearance Required to Start**

Defense, Space & Security (BDS) is seeking avionics development engineers with a minimum of 3 years experience to implement state of the art sensing, communication, navigation and processing hardware into weapon systems at the St. Louis, MO site.

On our team, you will perform hands-on functional requirements development, interface definition, oversee supplier design and development, and conduct system level compliance tests. Avionics development projects include data links, sensors, mission processors, fire control, and training simulators.

Opportunities exist to develop high speed processors and networks, wide bandwidth data links, full motion video, multi spectrum sensors, weapon control hardware and flight simulators. Company is investing now to take advantage of the latest avionics development tool sets with an overall strategy to improve capability and reliability.

You will work with a team in a professional and casual environment in an environment where Quality is #1. Your personal contribution will ensure our products work right every time.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
A bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace Engineering or equivalent. ABET is the preferred, although not required, accreditation standard.

A minimum of 3 years’ experience in the development and test of avionics systems.
• Avionic sub system, principles, architectures and, RF compatibility concepts
• Electronic/electrical system/component operating principles and performance
• Interface definition and management
• Writing aircraft and /or avionics requirements
• Open Mission Systems (OMS) architecture and UCI messaging experience
• Data Link experience including Link-16
• Sensor integration experience with Radar, EW, or EO/IR sensors
• Cyber security experience
• Weapons integration experience

Some travel required.
 
Job Number: 372918
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Avionics Systems Development Engineer 2 - 372923 - (10 OPENINGS)

Description:
**Active Secret Clearance or Active Interim Secret Clearance Required to Start**

Connect, Protect, Explore and Inspire the World through Aerospace Innovation

Company Defense, Space & Security (BDS) is seeking avionics development engineers with a minimum of 3 years experience to implement state of the art sensing, communication, navigation and processing hardware into weapon systems at the Oklahoma City site.

On our team, you will perform hands-on functional requirements development, interface definition, oversee supplier design and development, and conduct system level compliance tests. Avionics development projects include data links, sensors, mission processors, fire control, and training simulators.

Opportunities exist to develop high speed processors and networks, wide bandwidth data links, full motion video, multi spectrum sensors, weapon control hardware and flight simulators. Company is investing now to take advantage of the latest avionics development tool sets with an overall strategy to improve capability and reliability.

You will work with a team in a professional and casual environment in an environment where Quality is #1. Your personal contribution will ensure our products work right every time.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
A bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace Engineering or equivalent. ABET is the preferred, although not required, accreditation standard.

A minimum of 3 years’ experience in the development and test of avionics systems.

• Avionic sub system, principles, architectures and, RF compatibility concepts
• Electronic/electrical system/component operating principles and performance
• Interface definition and management
• Writing aircraft and /or avionics requirements
• Open Mission Systems (OMS) architecture and UCI messaging experience
• Data Link experience including Link-16
• Sensor integration experience with Radar, EW, or EO/IR sensors
• Cyber security experience
• Weapons integration experience
 
Job Number: 372923
Job Location: OK City, OK
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Avionics Systems Development Engineer 3 - 372924 - (10 OPENINGS)

Description:
**Active Secret Clearance or Active Interim Secret Clearance Required to Start**

Connect, Protect, Explore and Inspire the World through Aerospace Innovation

Company Defense, Space & Security (BDS) is seeking avionics development engineers with a minimum of 5 years experience to implement state of the art sensing, communication, navigation and processing hardware into weapon systems at the Oklahoma City site.

On our team, you will perform hands-on functional requirements development, interface definition, oversee supplier design and development, and conduct system level compliance tests. Avionics development projects include data links, sensors, mission processors, fire control, and training simulators.

Opportunities exist to develop high speed processors and networks, wide bandwidth data links, full motion video, multi spectrum sensors, weapon control hardware and flight simulators. Company is investing now to take advantage of the latest avionics development tool sets with an overall strategy to improve capability and reliability.

You will work with a team in a professional and casual environment in an environment where Quality is #1. Your personal contribution will ensure our products work right every time.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Skills:
A minimum of 5 years’ experience in the development and test of avionics systems.
• Avionic sub system, principles, architectures and, RF compatibility concepts
• Electronic/electrical system/component operating principles and performance
• Interface definition and management
• Writing aircraft and /or avionics requirements
• Open Mission Systems (OMS) architecture and UCI messaging experience
• Data Link experience including Link-16
• Sensor integration experience with Radar, EW, or EO/IR sensors
• Cyber security experience
• Weapons integration experience

Education:
A bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace Engineering or equivalent. ABET is the preferred, although not required, accreditation standard.


 
Job Number: 372924
Job Location: OK City, OK
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Avionics Systems Development Engineer 3 - 372925 - (10 OPENINGS)

Description:
**Active Secret Clearance or Active Interim Secret Clearance Required to Start**

Job Description:
Connect, Protect, Explore and Inspire the World through Aerospace Innovation

Company Defense, Space & Security (BDS) is seeking avionics development engineers with a minimum of 5 years experience to implement state of the art sensing, communication, navigation and processing hardware into weapon systems at the St. Louis, MO site.

On our team, you will perform hands-on functional requirements development, interface definition, oversee supplier design and development, and conduct system level compliance tests. Avionics development projects include data links, sensors, mission processors, fire control, and training simulators.

Opportunities exist to develop high speed processors and networks, wide bandwidth data links, full motion video, multi spectrum sensors, weapon control hardware and flight simulators. Boeing is investing now to take advantage of the latest avionics development tool sets with an overall strategy to improve capability and reliability.

You will work with a team in a professional and casual environment in an environment where Quality is #1. Your personal contribution will ensure our products work right every time.

Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Skills:
A minimum of 5 years’ experience in the development and test of avionics systems.

• Avionic sub system, principles, architectures and, RF compatibility concepts
• Electronic/electrical system/component operating principles and performance
• Interface definition and management
• Writing aircraft and /or avionics requirements
• Open Mission Systems (OMS) architecture and UCI messaging experience
• Data Link experience including Link-16
• Sensor integration experience with Radar, EW, or EO/IR sensors
• Cyber security experience
• Weapons integration experience

Education:
A bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Aerospace Engineering or equivalent. ABET is the preferred, although not required, accreditation standard.

 
Job Number: 372925
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Avionics Tech

Description:
PDS Tech is seeking an Avionics Technician for an open position in  Wichita, KS
In your role, you will:

Job Details:

  • Identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components.
  • Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights.
  • Perform minor repair such as replacing wires and connectors on standard electrical components, removing, repairing, and re-installing avionics equipment.
  • Under guidance of supervisor, assist with analysis of more complicated malfunctions and repair of standard avionics and electrical components.
  • Install electrical, avionics, and electronic components as directed.


 

Job Requirements:
  • A.A.S. in Electronics/Aircraft Avionics or equivalent formal training
     
    Position Requirements:
     
    Broad training and fundamental skills for hands on avionics/electrical troubleshooting of aircraft systems.
    Ability to deal with change and work in a dynamic environment.
    Excellent written and verbal communication skills are required.
    Professional demeanor and organizational skills.
    Must have positive attitude and outstanding integrity.


 

 
Job Number: 1710077238
Job Location: Wichita, KS
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PxUAAU&URLSource=cjhunter

Avionics/Elec Tech I

Description:
PDS Tech is seeking Avionics/Elec Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:
1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. 2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. 7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.
 

Unique Skills: A&P, FCC licenses preferred. NCATT certification preferred. Must be willing to work any shift.


 
Job Number: 1710077092
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PNFAA2&URLSource=cjhunter

Avionics/Elec Tech II

Description:
PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:

  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 

Additional Functions:

  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 

Education and Experience Requirements:



  • High School graduate/GED.
  • A & P license, FCC license or NCATT certification preferred.
  • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.


 


 
Job Number: 1710075689
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LxlAAE&URLSource=cjhunter

Avionics/Electrical Contractor (Custom Engineering)Tech Spec I

Description:
PDS Tech is seeking a  Avionics/Electrical Contractor (Custom Engineering)Tech Spec I for an open position in Savannah, GA.

Position Purpose:



Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services 

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned 

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline



 



 



 

Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

 



Unique Skills:



Must be proficient at creating design and compliance data to support after market installations on all Gulfstream models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.


 
Job Number: 1710077516
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QWZAA2&URLSource=cjhunter

Avionics/Electrical Technician

Description:
Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

Essential Functions:
1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
10. Adapt to sudden schedule changes.
 
Education and Experience Requirements:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
 
 
Job Number: 1710073185
Job Location: Westfield, MA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FejAAE&URLSource=cjhunter

Avionics/Electrical Technician

Description:
Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

Essential Functions:
1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
10. Adapt to sudden schedule changes.
 
Education and Experience Requirements:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
 
 
Job Number: 1710073186
Job Location: Westfield, MA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FetAAE&URLSource=cjhunter

Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

BFTC A/C Configuration Controller -WIC04059

Description:
PDS is looking for a BFTC A/C Configuration Controller:












In your role, you will:



  • Ensure (through discussion with Engineering and the Flight Crew) that proposed aircraft configuration changes, will not adversely affect upcoming ground or flight tests
  • Ensure that detailed aircraft configuration requirements (FTE Set-up Sheets) are met
  • Prepare, coordinate and authorize work to be performed on the aircraft, including development of the nightly work package
  • Act as the primary point of contact to authorize all work performed on the flight test aircraft
  • Prepare Pre-flight/Pre-Test Aircraft Configuration Briefing report and conduct briefings
  • Attend Post-flight/Post-Test debrief meetings and perform follow up coordination activities for discrepancies reported during testing
  • In coordination with Quality Assurance, plan and coordinate the timely execution of all Airworthiness Maintenance requirements, and maintain the tracking and timing of inspections, time life items and special maintenance items
  • Work closely with the Flight Crew and is familiar with the aircraft test schedule
  • Assist Lead Flight Test Engineer with the development of the short-term flight test schedule by providing input for upcoming maintenance, inspection and down time requirements.
  • Attend daily meetings associated with aircraft support issues and status briefings
  • Support offsite testing as required
  • Manage deferred maintenance items and coordinate resolution
  • Assist Project and Ground Operations with the development of downtime planning activities

























Qualifications












As our ideal candidate,



  • You must have 5-7 years of experience in the aircraft maintenance field as a Mechanic, Technician, or Inspector.
  • You must have 3-5 years of flight test experience
  • You must have the conflict resolution skills necessary to resolve daily issues in a professional manner
  • You must have a willingness to work weekend days and nights
  • You must have a willingness to work overtime
  • You must have a willingness to travel
  • You must be able to obtain a Canadian Work Permit


























 
Job Number: 1710068929
Job Location: Wichita, KS
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JtHNAA0&URLSource=cjhunter

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

Knowledge, Skills and Abilities:
1. Ability to create 3D models utilizing CATIA V5.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-011
Job Location: Greensboro, NC
Rate: $50 - 60/hr May pay more DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Bleed Air System & Vapor Cycle System Design Engineer

Description:
General Summary: 
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS
  • Prepare 3D installation and detail models of the BAS and VCS
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies

Qualifications:
 
Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
  • 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS


 
Knowledge, Skills and Abilities:

1.        Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years of experience
2.        Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
3.        Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS
 


 
Job Number: 1710069638
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnEQAA0&URLSource=cjhunter

Burr Hand - MI

Description:
Chipton-Ross is seeking a Burr Hand for an opening in Macomb, MI.

RESPONSIBILITIES:
The acceptable candidate shall be required to deburr aircraft gears and complex housings, also do sand blasting, heat treat preparation and visual inspection of assignments. Able to operate chucker lathe for manual edge break of sharp corners. Being familiar with lean manufacturing and continuous improvement techniques is beneficial. Overtime generally required. Able to bend, stoop, stand, kneel, and lift up to 50 lbs. as needed.

REQUIRED EXPERIENCE:
Previous experience in deburring of aircraft gears and housings preferred. On the job training provided as necessary.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 166352
Job Location: Macomb, MI
Rate: $16 to $28.00 DOE
Duration: 6 months CTH
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Erin Simmons
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: esimmons@chiptonross.com
Website: www.chiptonross.com

Business Process Analyst

Description:
General Summary:
The Business Process Analyst enables problem solving and data driven decisions for the program office and program management team by developing and maintaining metrics, reporting tools, and integrating data across a variety of business systems.  These business systems include but are not limited to SAP, Team Center, SharePoint, and individual files in MS Office formats.
 
Duties and Responsibilities:
  1. Collects and interrogates aircraft, project, and part status data from a variety of sources
  2. Provides metrics and reports in support of the program management team on one-time and recurring needs.
  3. Develops ad-hoc reporting solutions in MS Excel, MS Access, Business Intelligence (SAP), and MS SharePoint. 
  4. Develops methods to automate and integrate reporting templates to improve consistency while reducing the time to execute on a daily, weekly, or monthly basis.
  5. Defines requirements, validate, and support implementation of related IT projects for the project office.
  6. Interacts with several organizations such as Supply Chain, IT, Operations, and Engineering to fully understand and access data.

Education, Work Experience, Certification and/or Licensure:
  1. Bachelor’s Degree (BA/BS) from four-year college or university required.
  2. 2+ Years’ experience in developing and maintaining business systems data in a manufacturing environment.

 
Knowledge, Skills and Abilities:

  1. Strong oral and written communication skills.
  2. Excellent collaboration and interpersonal skills, with a demonstrated ability to successfully work cross-functionally and with all levels within the business.
  3. Competent SAP user familiar with common MRP and supply chain functions.
  4. Proficient in MS Office Suite (Excel, Word, PowerPoint, Project, Access).
  5. Experience in developing macros in MS Excel using MS Visual Basic.
  6. Experience building SQL queries to parse and reformat large data sets.
  7. Able to create and edit Business Intelligence Reports.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  


PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
 
Job Number: 1710062026
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G5qfAAC&URLSource=cjhunter

Business Process Analyst

Description:
General Summary:
The Business Process Analyst enables problem solving and data driven decisions for the program office and program management team by developing and maintaining metrics, reporting tools, and integrating data across a variety of business systems.  These business systems include but are not limited to SAP, Team Center, SharePoint, and individual files in MS Office formats.

Duties and Responsibilities:
  1. Collects and interrogates aircraft, project, and part status data from a variety of sources
  2. Provides metrics and reports in support of the program management team on one-time and recurring needs.
  3. Develops ad-hoc reporting solutions in MS Excel, MS Access, Business Intelligence (SAP), and MS SharePoint. 
  4. Develops methods to automate and integrate reporting templates to improve consistency while reducing the time to execute on a daily, weekly, or monthly basis.
  5. Defines requirements, validate, and support implementation of related IT projects for the project office.
  6. Interacts with several organizations such as Supply Chain, IT, Operations, and Engineering to fully understand and access data.

Education, Work Experience, Certification and/or Licensure:
  1. Bachelor’s Degree (BA/BS) from four-year college or university required.
  2. 2+ Years’ experience in developing and maintaining business systems data in a manufacturing environment.

 
Knowledge, Skills and Abilities:

  1. Strong oral and written communication skills.
  2. Excellent collaboration and interpersonal skills, with a demonstrated ability to successfully work cross-functionally and with all levels within the business.
  3. Competent SAP user familiar with common MRP and supply chain functions.
  4. Proficient in MS Office Suite (Excel, Word, PowerPoint, Project, Access).
  5. Experience in developing macros in MS Excel using MS Visual Basic.
  6. Experience building SQL queries to parse and reformat large data sets.
  7. Able to create and edit Business Intelligence Reports.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

 
Job Number: 1610052691
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001t3MvAAI&URLSource=cjhunter

Buyer Associate

Description:
PDS Tech, Inc. is seeking a candidate for the Buyer Associate position located in Trumbull, CT. 
Role and Responsibilities: 

  • Manage the procurement cycle from purchase order to payment of invoice 
  • Coordinate with production, completion and repair departments to set priorities and time-lines 
  • Negotiate pricing and contractual terms 
  • Negotiate and manage lead times 
  • Manage vendor relationships and performance issues 
  • Control costs and perform price analysis 
  • Maintain accuracy of purchasing documents and data 
  • Be aware of and follow all applicable Federal Aviation Regulations, hazardous materials requirements, repair station requirements, FARS and DFARS, and Sikorsky Aircraft policies 
  • Other tasks and duties as assigned by management 

Skills and Qualifications 
  • BS from an accredited college in a related discipline - Required 
  • MS from an accredited college in a related discipline - Preferred 
  • 3 + years’ relevant work experience - Required 

 
Job Number: 1710073429
Job Location: Trumbull, CT
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GS0AAM&URLSource=cjhunter

Buyer Associate

Description:
PDS Tech, Inc. is seeking a candidate for the Buyer Associate position located in trumbull, CT. 
Supports acquisition and sourcing of materials and resources required for the company for direct and/or indirect material including assisting with contracts (LTA) and order creation. 
• Manage the procurement cycle from purchase order to payment of 
invoice 
• Coordinate with production, completion and repair departments to set 
priorities and time-lines 
• Negotiate pricing and contractual terms 
• Negotiate and manage lead times 
• Manage vendor relationships and performance issues 
• Control costs and perform price analysis 
• Maintain accuracy of purchasing documents and data 
• Be aware of and follow all applicable Federal Aviation Regulations, 
hazardous materials requirements, repair station requirements, FARS 
and DFARS, and Sikorsky Aircraft policies 
• Other tasks and duties as assigned by management 

 
Job Number: 1710076637
Job Location: Trumbull, CT
Duration: 19 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NrKAAU&URLSource=cjhunter

CATIA Instructor

Description:
PDS is seeking an CATIA Instructor for an open position in Savannah, GA

In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Client's products and services 

Essential Functions:
  1. Formal Classroom instruction experience required for CATIA and PDM.
  2. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
  3. Is consulted extensively by associates and others as a recognized authority within the field
  4. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
  5. Approach to problem solving balances technical product, cost and schedule
  6. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
  7. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 


Additional Functions:

  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 


Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Formal Classroom instruction experience required for CATIA and PDM.
  • Advanced degree in engineering, or related curriculum preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

POC:  Clyde (813)426-9917 or ccallwood@pdstech.com 
 


 
Job Number: 1610056929
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FavrAAC&URLSource=cjhunter

CNC Grind OD/ID - MI

Description:
Chipton-Ross is seeking a CNC Grind OD/ID for an opening in Macomb, MI.

RESPONSIBILITIES:
The acceptable candidate shall be required to set up and operate CNC and Manual OD and ID grind equipment with minimal supervision. Grinding of splined shafts and aircraft gears holding tolerances of .0001"-.0005." Maintain proper documentation of SPC data and participate in client's certified operator program. Familiarity with lean manufacturing and continuous improvement techniques beneficial. Overtime generally required. Inspection of work utilizing certified operator program. Able to bend, stoop, stand, kneel, and lift up to 50 lbs. as needed.

REQUIRED EXPERIENCE:
Blueprint reading skills, shop math skills and proficiency in the use of a wide variety of precision measuring tools is required. 3 to 5 years' experience.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 166351
Job Location: Macomb, MI
Rate: $16 to $28.00 DOE
Duration: 6 Months CTH
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist Class C Third Shift (Night)

Description:
Velocity represents an internationally known leader in the design and manufacture of aerospace fastening, bushings and fittings. Our client has developed innovative products for both metal and composite applications that are used on commercial and military rotor and fixed wing aircraft worldwide. Their products are approved and used by virtually every airplane and helicopter manufacturer. Our client is currently looking for a CNC Machinist C for its manufacturing operation in Tukwila, WA.
Position Summary:
Under minimal supervision, sets up and operates computer numerical control lathes, mills and machining centers to cut, shape, or form metal work pieces to specification by performing the following duties.
Key Responsibilities:
• Performs basic operation of equipment to produce to rate and meet quality standards.
• Loads material into machine and unloads parts after operation.
• Monitors and removes metal chips from tools and equipment and disposes of them in the proper container.
• Monitors machine condition and reports and unusual noises or occurrences to supervisor or lead.
• Monitors cutting conditions and alerts lead or supervisor if tools are not cutting properly.
• Performs housekeeping tasks to maintain a clean and orderly workstation and performs basic machine upkeep, such as wiping down outside surface of machine, lubrication, etc.
• May hand Deburr or sand parts, as needed.

Core Competencies Required for this Position:
• Good inter-personal skills.
• Good verbal and written communications skills.
• Organization and time management skills.
• Problem solving/analysis.



Qualifications:
• At least 1 year related CNC lathe or mill experience or equivalent combination of experience and training.
• Must have knowledge of shop practices and procedures, ability to read blueprints, and ability to use hand tools and measuring instruments.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manuals.
• Ability to write routine data on routers and SPC charts.
• Ability to use math skills to solve problems.
 
Job Location: Tukwila, WA
Overtime: Possible
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

Cabinet Finisher

Description:
Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.
 
Principal Duties and Responsibilities:
Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery.
Applies finish to furniture using spray equipment and other manual/mechanical methods.
Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
Complies with all safety, 5S, and housekee