Job Search Results

131 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 12:47PM Pacific Time by ContractJobHunter. )

Listings 1 - 131

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Design Engineer

Description:
The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units. The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units. The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements. The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.

REQUIRED EXPERIENCE:
Bachelor's Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment; OR, a minimum of 7 years of experience with a Master's Degree in STEM.
Design and test experience in digital technology.

Preferred Qualifications:
Design and test experience in Analog/RF technology.
Master's Degree in Electrical or Computer Engineering from an accredited institution.
Excellent written and verbal communication skills.

EDUCATION:
Bachelor's Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution is required.
Master's Degree in Electrical or Computer Engineering from an accredited institution is preferred.

HOURS:
9/80 workweek.
 
Job Number: 184589
Job Location: Manhattan Beach, CA
Rate: $73-80/hr
Per Diem: split
Overtime: not specified
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
An Electrical Engineer job in Englewood, Colorado is available with one of Belcan's top aerospace clients. In this job you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product life-cycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Requirements:
* Bachelor's degree in Electrical Engineering or related Engineering discipline and at least 6 years of relevant experience
* Experience with database based drawing software (Zuken E3, Capital Harness, etc.)
* Background in the Aerospace and Defense Industry
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation and analysis
* Knowledge of industry standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing and production processes
* Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
* Experience in digital or analog circuit design and schematic capture
* Demonstrated knowledge of engineering principles and practices
* Experience working in multi-disciplinary design & development teams
* Experience with Computer Aided Engineering tools
* The ability to obtain and maintain a U.S. Secret Security clearance is required


If you are interested in this Electrical Engineer job in Englewood, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302933
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Summary:
1. Project Engineer, Electrical Product Development IPD Lead.
2. Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
3. Our client is one of the world’s largest suppliers of technologically advanced aerospace and defense products.
4. ISR & Space Systems is a business unit within our client and their products reside in deep space, low earth orbit, undersea and on the ground.
5. They are also a major supplier to international space programs.
6. The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years.
7. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support Systems on the International Space Station, including the space suit, and undersea in submarines.

Job Description:
1. Project Engineer to lead Integrated Product Development Team efforts relative to addressing obsolescence of several key enabling technologies for the both crewed and unmanned space applications.
2. Specifically you will be involved in development activities related to digital electronics as enablers of our space hardware and systems.
3. This position will take direction from the Program Chief Engineer.

As an Electrical Project Engineer Leader, you will be immersed in the following activities:
1. Coordinating setting team meeting agendas, leading team meetings and driving action item closures.
2. Coordinating the electrical design activities associated with the development of new circuitry and integration of that circuitry for our digital electronics.
3. Team activity scope control, including status and corrective action plans to budget challenges.
4. Coordination of engineering change activities.
5. Coordination and driving failure investigation activities.
6. Driving issue resolution closures due to assembly, test and procurement challenges.
7. Oversite and driving of IPD team activities to drive the engineering work products that enable procurements, fabrication, assembly and test.
8. The candidate will drive the execution of all engineering responsibilities on the program while meeting both internal and external customer expectations.
9. Direct communication with customers will be required – including daily tag-ups, weekly meetings, and quarterly meetings.
10. This position requires strong interpersonal and communication skills (both verbal and written), technical experience, and the ability to work as cross-functional team member. .

Education / Certifications:
1. BA/BS in Electrical Engineering degree w/ 12 + years of experience.
2. MA/MS in Electrical Engineering 10 + years of experience.

Experience/Qualifications:
1. Desire to lead teams from an engineering and project execution perspective.
2. A working knowledge of electronic circuitry development and development testing.
3. A working knowledge of manufacturing and testing of digital electronic circuitry.
4. Exceptional organizational, analytical, written and verbal communication skills.
5. Ability to multi-task and prioritize both daily issues and strategize longer term projects.
6. Superior interpersonal and influencing skills, including coaching and mentoring of other engineering staff.
7. Strong computer skills, MS Office.
8. Three years of experienced utilizing Earned Value Management Methodology.
9. Natural presence/comfortable presenting to internal and external customers.
10. Ability to bring team members together and work problems to resolution.
11. A desire to lead with the purpose of improving IPD Team performance.
12. US Citizen.
 
Job Number: 12481
Job Location: Windsor Locks, CT
Rate: $58.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Inconen is looking for a Electrical Test Engineer for our client, a well-known Aerospace Company, in Windsor Locks, CT.

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12457
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/19/2020
Last Updated: 12/09/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronics Engineer - Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time Electrical/Electronics Engineers to work in Jacksonville, FL. Engineers are responsible for providing technical assistance and guidance for operations and maintenance of electrical and electronic equipment for various DoD aircraft. These positions are located in Jacksonville, Florida.

Advantages of working with ASI in Jacksonville:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Great work environment
- Compressed and flexible work schedules
- Ability to work from home
- Diverse projects supporting multiple platforms
- Fantastic co-workers and customers

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the electronic engineering discipline
• Design, develop, and review schematics, systems, equipment, fixtures, and other technical requirements
• Prototype, validate and troubleshoot system installations
• Perform engineering investigations of failed electronic components and systems
• Determine requirements and technical specifications for modifications and/or purchase of new equipment
• Develop and maintain procedures for maintaining complex automated test equipment, new capability development, and process improvement
• Prepare and review engineering and technical analyses, reports, and other technical documentation
• Review technical publication deficiency reports and update publications as necessary
• Provide recommendations, designs, and report to Government representatives for final actions, review, and follow-up
• Review existing and/or development of new systems and tooling calibration/maintenance procedures
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Electrical/Electronics Engineering from an accredited college or university
• 3 years of Electrical/Electronics engineering experience
• Ability to use Excel, Word, Outlook, PowerPoint
• Effective communication and interpersonal skills

Preferred Qualifications:
• 10+ years of Electrical/Electronics engineering within the aviation, aerospace, or defense industry
• Experience with NAVAIR engineering and reporting procedures

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 656
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Electrical Engineer

Description:
n this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Optical/RF Engineer

Description:
Develop and integrate complex electronic Test Sets and hardware units. The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units. The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements.

REQUIRED EXPERIENCE:
Bachelor's Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment; OR, a minimum of 7 years of experience with a Master's Degree in STEM.
Design and test experience in high frequency (RF/Optical) technology.
The ideal candidate has a broad range of experience with design and integration of test systems and has familiarity with analog, digital, RF/optical technologies.
This individual must be comfortable leading a small team.

Preferred Qualifications:
Master's Degree in Electrical or Computer Engineering from an accredited institution.
Excellent written and verbal communication skills.

EDUCATION:
Bachelor's Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution, OR Master's Degree in STEM from an accredited institution is required.

HOURS:
9/80 workweek.
 
Job Number: 185525
Job Location: Manhattan Beach, CA
Rate: $70-75/hour
Per Diem: split
Overtime: not specified
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

REQUIRED EXPERIENCE:
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

DESRIED EXPERIENCE:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

EDUCATION:
Accredited BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education

WORK HOURS:
4/10
Full-Time
 
Job Number: 186149
Job Location: Fort Worth, TX
Rate: $68.16/hr
Per Diem: split
Overtime: not specified
Duration: 12/+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior GNC Engineer

Description:
Senior Guidance, Navigation and Control Engineer job in Louisville, Colorado is available with one of Belcan's top aerospace clients. In this job you will use your skills and expertise to design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities. Your technical duties involve the design, development, evaluation, and test of new products and processes throughout the product lifecycle.

Responsibilities:
* Design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles.
* Cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
* Explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities.
* Design, development, evaluation, and test of new products and processes throughout the product lifecycle.


Requirements
* Bachelors of Science degree in Aerospace Engineering or other related discipline
* 10+ years of experience
* Thorough understanding of engineering principles and practices
* Fundamental understanding of the principles of strap down navigation, navigation Kalman filter design and absolute/relative navigation system designs and considerations
* Practical hands on experience with flight sensors and associated sensor test and modeling
* Experience developing, testing and certifying navigation algorithms and flight software
* Fluency with MATLAB/Simulink
* Experience defining navigation sensor performance and location requirements including sensor selection
* Experience developing tools to configure and assess performance of navigation sensors and navigation algorithms
* Experience with our Dream Chaser specific vehicle sensor suite
* Experience with ISS relative navigation system designs, considerations and limitations
* Fluency with Linux environments, C++ and Python programming languages
* Knowledge of industry standard system engineering design principles, to include, classical and Model Based System Engineering (MBSE)
* Knowledge of industry standard aerospace principles, to include, but not limited to parametric design and model-based definition
* Experience with flight test and hardware software integration
* Background in the Aerospace and Defense Industry
* The ability to obtain and maintain a Security Clearance

If you are interested in this GNC Engineering job in Lousiville, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302781
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineers Needed

Description:
• We are seeking a Structural Analysis Engineer with a Bachelor's degree in Structural, Stress, or a related Engineering field and at least 6 years of relevant experience. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow.

What to look forward to:

As a Structural Engineer, you will be using your skills and expertise to analyze, research, and develop our complex structural engineering specifications involving structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment, and maintenance designs. You'll be responsible for analyzing damage tolerance, durability, producibility, cost, dynamics, loads, stability and stress fatigue, thermal analysis, and safety. You'll recommend design approaches to meet our production requirements for new or improved products or processes.

Must-haves:
• Bachelor's degree in Structural, Stress, or related Engineering discipline and at least 6 years of relevant experience
• Prior experience in project definition, simulation, implementation, lab integration, and test
• Strong classical analysis techniques.

Preferred:
• Experience with Femap/Nastran
• Aviation integration experience, system integration tied to aircraft
• Airbus experience.
• Aircraft configuration management
• Experience with airworthiness requirements including Mil-hdbk-516 and FAR 25 requirements
• Aircraft subsystem design background
• Architectural development experience and configuration design skills


The Structures Company is an AA/EOE.
 
Job Number: 405
Job Location: Wichita, KS
Rate: ***DOE***
Per Diem: Yes
Overtime: No
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Job Description Summary
If you like solving problems and working with complex materials and systems, join our amazing team! As a Structural Engineer, you will be using your skills and expertise to design, evaluate, and certify our cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle.

Job Description

Must-haves:
 Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience
 Understanding of engineering principles and practices
 Knowledge of Computer Aided Engineering tools
 Ability to work in multi-disciplinary design and development teams
 Experience to Static and/or Dynamic Analyses
 Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools such as MSC Patran, Nastran, FEMAP, or ANSYS
 The ability to obtain and maintain a Secret U.S. Security Clearance is required
Preferred:
 Experience performing fatigue and damage tolerance analysis utilizing tools such as NASGRO or AFGROW
 Ability to perform classical analysis using industry standard hand calculation methods
 Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
 Ability to author substantiation reports
 Background in the Aerospace and Defense Industry
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technicians

Description:
STS Technical Services is hiring Test Technicians in Dallas, Texas.

Job Summary:
The successful candidate will support Production and Engineering on testing various semiconductor components.
Able to read operation instructions and specifications.
Work from assembly schematics and engineer’s drawings.
 Interpret and follow documents such as SOPs and safety rules
Job Duties:
Provides routine technical support to production and engineering on standard components, devices, material, products, processes and/or equipment.
Responsibilities may include testing, modifying and reworking, electronic or mechanical assemblies.
Work from standard wiring and assembly drawings, operation sheets, engineering specifications and drawings.
Perform Key Performance Indicators:
Meet production deadlines
Quality of finished product (Pass/fail rates)
Compliance outcomes
Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices.
Recognize, communicate, and respond to process deviations and help identify root cause and corrective actions.
Perform standard testing processes on a variety of equipment and recording results.
Requires knowledge of industry specific tests and testing equipment, alignment and troubleshooting test failures
Required Qualifications:
Education: High School diploma or GED equivalent
Able to follow verbal and written instructions from Management and Engineering
Basic knowledge and understanding of automated and semi-automated test equipment.
The candidate will handle small delicate electronic components, using ESD practices.
Must have good mechanical skills.
Desired Qualifications:
Associate’s Degree in related discipline with 2+ years of experience or equivalent combination of education and experience.
Experienced with Final Test/Acceptance Test.
Must demonstrate strong decision-making and leadership skills.
Experienced in the use of various computer applications, including Microsoft Office (Outlook, Excel, Word)
About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you have questions and want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35097
Job Location: Dallas, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Frances Berg
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search