Job Search Results

692 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/21 Thursday 02:21AM Pacific Time by ContractJobHunter. )

Listings 1 - 692

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 11/20/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 10/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 11/20/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

A&P Aircraft Mechanic

Description:
 PDS Tech is seeking an A&P Aircraft Mechanic in Trumbull, CT
 
* This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
 
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.
 
Assigned Duties
  • Work independently with limited supervision.
  • Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
  • Perform repair of detail components by filing, stoning, lapping and polishing.
  • Using power and hand tools for drilling, sanding and riveting.
  • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
  • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
  • Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
  • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
  • Chemically treat repaired surfaces in accordance with approved data.
  • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
  • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
  • Use hydraulic test equipment.
     

Experience Required 
  • High School Diploma or Equivalent required 
  • Aerospace Powerplant and/or Airframe license. 
  • Min. 2 yrs. experience in Aerospace Maintenance

 
Job Number: 1910106123
Job Location: Trumbull, CT
Duration: 18 months
Input Date: 09/05/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZGYQA4&URLSource=cjhunter

A&P Mechanic

Description:
The ideal candidates will perform Depot, Intermediate, and Organizational repairs, upgrades and Modifications to Aircraft product lines and their components. 

Duties to include:

  • Component overhaul and repair
  • Crash damage repair
  • Aircraft and component teardown and evaluation
  • Incorporating ECP's
  • Technical directives, ASAM's ASB's and CSN's
  • Validating and verifying retrofit kit upgrades
  • Administering training to customers

 Must be experienced in:

  • Must have 7-10 years of experience on UH-60 aircraft and an A&P license.
  • Maintenance of flight control systems
  • Fuel
  • Drivetrain
  • Rotor Systems
  • Blueprint Reading and Interpretation

Under a minimal of supervision be able to perform a variety of moderately complex tasks. 
 
 
Job Number: 1810092570
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 05/15/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lsAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

APG Mechanic
(U.S. Citizenship Required*)
Greenville, SC
2019-9830

Responsibilities:
• Perform a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualification:
• This position supports a 9/80 A- 1st work schedule.
• Engine and Propeller Rigging exp desired
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• 8 years P3 Orion experience desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9830
Job Location: Greenville, SC
Input Date: 10/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 09/23/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Engine and Propeller Rigging URGENT SC

Description:
166498 Job Title: APG Mechanic
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Start Date: 10/21/2019
End Date: 12/31/2019
Position Type: Contract

Job Summary:
This role has 3 open positions that the hiring manager is very eager to fill. Please send qualified candidates ASAP.

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging exp desired

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years



Qty 3 positions required
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 months +
Input Date: 10/15/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JEG -1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 09/23/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Adv Compos Tech III

Description:

PDS is seeking an Advanced Composite Tech III for an open position in Tulsa, OK

Position Purpose:



Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. 


Additional Functions: 1. Perform other duties as assigned. 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills.
Three (3) years of related composite experience.
Ability to work with composite resins and materials.
Requires ability to read and interpret blueprints.
Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.



Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.
 
 
Job Number: 1810092566
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 07/25/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lEAAQ&URLSource=cjhunter

Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 09/30/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Clearance CA

Description:
166409
Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 10/01/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Air Data Systems Engineer

Description:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the technology roadmap
• Provide validation and verification of air data systems requirements


We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

The Structures Company is AA/EOE.
 
Job Number: 324
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/07/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembler - 10 openings / F-16 F-35 C-130 FL

Description:
Job Title: Aircraft Assembler
Work Site Address: Pinellas, FL 33782
Job Number: 472802
Max Pay Rate: $22/hr
Start Date: 8/27/2019
End Date: Contract to LM Employee
Position Type: Contract to hire possible

Job Summary:
Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print.

Job Description:
Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

Qualifications and Education Requirements
1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required.
Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred.
Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred.
Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.
High School Diploma or equivalent.
Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.


M,T,W,Th 10 Hours, Friday Off
6:00am to 4:30pm. Or 6:30am to 5:00pm
 
Job Number: LMPIN-472802
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: CTH
Input Date: 09/05/2019
Last Updated: 10/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.



The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Electrician 3

Description:
NOTE: US Citizen. PFT, Audio Hearing Exam and Medical Physical required to start.

Chipton-Ross is seeking an Aircraft Electrician 3 for an opportunity in Moss Point, MS.

RESPONSIBILITIES:
Performs all duties required to lay out, fabricate, and install electrical wiring or coaxial cable on aircraft. Checks, tests, and troubleshoots electrical systems for conformance to specifications and performs repair, removal, and reinstallation of wiring as necessary. Cuts wire to length, strips insulation from wire ends, and insulates connections with plastic sleeves. Attaches wire or complicated electrical systems to fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder. May monitor and verify quality in accordance with statistical process or other control procedures.

REQUIRED EXPERIENCE:
High school diploma or equivalent and 4 years' related experience.

EDUCATION:
High school diploma or equivalent is required.
School must be accredited.

HOURS:
4/10 workweek and must be able to work 1st OR 2nd shift IF required.

 
Job Number: 181305
Job Location: Moss Point, MS
Rate: Up to $27.00 DOE
Duration: 1 year
Input Date: 08/27/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Generation Equipment SC

Description:
Job Title: Aircraft Generation Equipment
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2111-1
Max Pay Rate: $32.00/hr
Start Date: 10/7/2019
End Date: 12/31/2020
Position Type: Contract


Job Summary:
Installs, operates, maintains, repairs and modifies equipment. Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations.

Roles and Responsibilities
Analyzes and evaluates products and related performance. Troubleshoots and diagnoses malfunctions to eliminate problem in minimum time. Installs, upgrades and removes products ensuring coordinative engineering field change. Maintains effective customer communications and relations. May provide onsite training of customer support personnel.

Skills: Category Name Required Importance Experience
Areas of Expertise Diagnostic and Repair Procedures Yes 1 6+ Years
Soft Skills Troubleshooting Yes 1 6+ Years
Technical Skills Diagnostic and Repair Yes 1 6+ Years
Technical Skills Electrical Diagnosis/Repair Yes 1 6+ Years
Technical Skills Understand of automotive repair Yes 1 6+ Years

Qty 1 position needed
 
Job Number: JEG -2111-1
Job Location: Greenville, SC
Rate: 32/hr max
Duration: 3 months +
Input Date: 09/23/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic or (Automotive Trade School experience)

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs, modifications and assembly on Airframe and Driveshaft components in accordance with approved data.

Assigned Duties:
• Work independently with limited supervision.
• Use precision measuring instruments and gauges such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s,
OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Drill, ream, tap, change studs, install helicoils, install bushings and liners by shrink fitting and arbor press.

Experience Required
• High School Diploma or Equivalent required
• Automotive trade school preferred

FAA Airframe license preferred but not required.
 
Job Number: 1910105868
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Aircraft Painter I

Description:
PDS is seeking an Aircraft Painter for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


Principal Duties and Responsibilities 
  • Mask, sand, and prepare aircraft for paint application.
  • Apply glazing and sealing compounds in preparation for final painting.
  • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
  • Perform leading edge sealant work in final detail.
  • Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
  • Properly care for and maintain shop equipment and tools as assigned.
  • Comply with Paint shop standard practices.
  • Perform other duties as required. 


Additional Functions:
Properly care for and maintain shop equipment and tools as assigned.
Comply with Paint shop standard practices.
Perform other duties as required.   
 

 


 

Education and Experience Requirements: 
High school diploma/GED. One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

Unique Skills:



Must be able to work well with a team.




Other Requirements:



  •  Ability to read, write, speak, and understand the English language.
  •  Ability to read and interpret blueprints and engineering documentation.
  • Able to pass Pulmonary Function Test to obtain respirator certification.
  • .Ability to use tools, equipment, and materials in the aircraft painting process.
  • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
  •  Must be computer literate.


 





 


 
Job Number: 1910104927
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/01/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVGjQAO&URLSource=cjhunter

Aircraft Plumber

Description:

PDS is seeking a Aircraft Plumber  for an open position in Savannah, GA.


Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings.
Must have 2 years experience as an Aircraft Plumber     

Essential Functions:
  1. Performs tasks layout, tube/hose fabrication and installation of parts, subassemblies and assemblies for aircraft water, drain, vent, pitot static and oxygen systems. 2. Safely operates equipment such as arbor press, flaring and de-burring machine, punch press, riveting equipment, nitrogen, water and oxygen servicing equipment, pitot static test equipment and other related testing equipment. 3. Identifies and uses common aircraft hardware, fittings and hoses in accordance with FAA requirements, Gulfstream procedures and accepted shop practices. 4. Complies with the inspection/documentation process for any components/systems fabricated, installed and tested. 5. Accomplishes all required paperwork and documentation as required by FAA requirements and Repair Station manual. 6. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment and ensures that aircraft interior is protected (PTP).

Additional Functions:

  • Performs other duties as required.   

Education and Experience Requirements:


High school diploma/GED.
Must have two (2) years of aircraft plumbing experience or aircraft systems.

Unique Skills:

Previous Aircraft experience along with Solumina, Catia V5, and SmarTeam experience preferred.



Other Requirements:
  • Ability to read write, speak, and understand the English language.
  • Ability to read, and interpret blueprints and engineering documentation.
  • Ability to use tools and equipment associated with aircraft plumbing systems.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate.

 
Job Number: 1910102013
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/06/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gbsQAA&URLSource=cjhunter

Aircraft Sheet metal Technician

Description:
Position Purpose:
The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Principle Duties and Responsibilities:
1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
8. Conduct monthly 5S audits, as required.
9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
10. Assist in developing initiatives to meet individual OGSM requirements, as required.
 
Education and Experience Requirements:
High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
Other Requirements:
1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
2. Ability to read and interpret blueprints and engineering documentation.
3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment.
4. Ability to read, write, speak, and understand proficiently the English language.
 5. Demonstrates excellent communication skills, both verbal and written.
6. Adapts to sudden schedule changes.
7. Able to use tools and equipment associated with sheet metal work.
8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
10. Must be able to read, write, speak, and understand the English language.
 
 
Job Number: 1910103713
Job Location: Appleton, WI
Duration: 12 months
Input Date: 07/01/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.
  • Strong structural background preferred.


Unique Skills:



  • A&P and Sheet metal experience desired.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 1910104113
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/02/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSd8QAG&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Systems Engineers - China - Contract

Description:
Avionic Systems Engineers - China - Contract.

Our Client in China is developing Cockpit Display Systems for the latest commercial aircraft. They are looking to add several Avionic Systems Engineers to work on  Specification Development and Modelling Development.

The chosen Engineers should be familiar with civil aircraft subsystems function, logic and physical architecture and modelling process. For the modelling development role, an engineer with a Software background is preferred.

Candidates should be prepared to work in China for up to one year on a contract basis.
 
Job Number: BH-226
Job Location: China, China
Rate: Negotiable
Per Diem: --
Overtime: --
Start Date: 09/30/2019
Input Date: 10/01/2019
Last Updated: 10/29/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

Description:
166338 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2095-1
Max Pay Rate: $29.00/hr
Start Date: 10/7/2019
End Date: 1/31/2020
Position Type: Contract

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Job Description:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
• Experienced in troubleshooting and flight line operations a must

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



Qualifications and Education Requirements
Needs to be really experienced in troubleshooting and flight line operations

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

Qty 1 position needed
 
Job Number: JEG -2095-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 10/15/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

Description:
165856
Avionic Technician
Greenville,SC 29605
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


Qty 3 openings
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG -1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 09/26/2019
Last Updated: 10/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
Experience with aircraft systems

Desired Skills:
1. Experienced in design, development, integration and test of datalink systems.
2. Familiar with DoD contracting and product acquisition.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11681
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired Skills:
1. MATLAB and/or C++ for analysis tool development
2. Familiarity with JSF avionics suite and systems engineering processes.
3. Familiarity with data analysis tools (e.g. Matlab)
4. Familiarity with JSF tools including SIMS and Dimensions
5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11628
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in a related technical field
2. Experience with mission systems/avionics

Desired Skills:
1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
4. Prior supplier management experiences a plus.
5. Familiarity with JSF toolsets: SIMS & PDM.
6. Current F-35 program experience and clearances.
7. Must be able to acquire a SAR clearance.
8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11623
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS in technical discipline and at least one year professional experience
2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired Skills:
1. Knowledge of RF, EW and/or CNI
2. Ability to understand and apply electronics engineering principles to development
3. Experience developing subsystem design/engineering documentation.
4. A working knowledge of tools for requirements and verification Traceability.
5. Experience with Agile Methodology
6. Ability to work with suppliers to generate verification and validation plans
7. Strong oral written communication skills
8. Strong interpersonal and collaboration skills
9. Strong work ethic and self-motivation

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11625
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineerr for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

EDUCATION:
Accredited Bachelor's degree in a related technical field

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information

WORK HOURS:
Full-Time, 9/80-A

 
Job Number: 182002
Job Location: Fort Worth, TX
Rate: $DOE
Input Date: 10/01/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer (Active Clearance)

Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
Comments for Suppliers: Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.
 
Job Location: Fort Worth, TX
Input Date: 10/02/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Avionics Engineer - Clearance TX

Description:
166417
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2147-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+0-3 YRS
Basic Qualifications
BS in technical discipline and at least one year professional experience
Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired skills
Knowledge of RF, EW and/or CNI
Ability to understand and apply electronics engineering principles to development
Experience developing subsystem design/engineering documentation.
A working knowledge of tools for requirements and verification Traceability.
Experience with Agile Methodology
Ability to work with suppliers to generate verification and validation plans
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation

Qty 1 position
 
Job Number: JE-2147-1S
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/01/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer - Clearance TX

Description:
166415
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2084-1
Max Pay Rate: $62.26/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

CNI, Radar, EW, or related avionics functions technology, and product development experience.
Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Basic Qualifications
Bachelor's degree in a related technical field
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2084-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/01/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician / Avionics modification experience / URGENT URGENT SC

Description:
166011 Job Title: Avionics Technician

Work Site Address: Greenville, SC 29605
Job Number: 1968-1
Max Pay Rate: $29.00/hr
Start Date: 9/2/2019
End Date: 12/19/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qty 3 positions needed
The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

Areas of Expertise P-3 No 3 4 - 6 Years
Technical Skills Electrical Testing No 2 4 - 6 Years
Technical Skills Read Electrical Schematics No 1 4 - 6 Years
 
Job Number: JEG -1968-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 09/30/2019
Last Updated: 10/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.

 

Unique Skills:



G650 experience preferred.



 


 

 
Job Number: 1910101665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/30/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

Business Manager - Engineering Services

Description:
Job Title:      Business Manager Engineering Services
Location:      Seattle, WA
Salary:           Base + Commission
Job Type:      Full Time w/ benefits
 
  

PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.
 
Description/Tasks
Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
The candidate should have capacity to:

  • Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
  • Develop customer relationships
  • Steering call for tender, financial proposal, team selection.
  • Management of resources working on projects
  • Steering project and deliveries.
  • Being target and results oriented
  • Start date:  ASAP.

Qualification/Experience
  • At least 2 years’ experience in aeronautics, in Engineering or Sales.
  • Minimum of Engineering Bachelor’s degree or similar from an accredited university.
  • Excellent presentation and communication skills are required.
  • Dynamic, hard-worker and passionate for technologies
  • Availability for business trip/travel in different states.
  • Home base: Seattle area.


More information on AKKA Technologies Group can be found on www.akka-technologies.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.




 
 
 
Job Number: 1910106765
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/24/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

CNC Machine Operator - CA

Description:
Chipton Ross is seeking a CNC machine Operator for an opening in Santa Maria, CA

Responsibilities
Operates computer numerical controlled (CNC) machines such as: milling machines, lathes, turning centers and horizontal mills used for the construction of aircraft interior structural and non structural parts. Aircraft interior parts are cut based on engineering drawings and include floor fittings, aluminum trims, counter tops and other various aluminum, stainless steel and phenolic parts
" Supervises and leads the operation of CNC machines in coordination with the production schedule and at the direction of the CNC Manager.
" Adheres to company and customer specifications, work instructions, engineering prints and work orders.
" Documents the materials and processes used in the process to maintain traceability of product.
" Loads programs into CNC machine and executes program cutting of the material.
" Cuts raw stock according to the necessary size for the part being machined.
" Secures and fixtures raw stock of material into machine, squares material prior to running program if necessary, and monitors the operating of the machine to ensure proper program performance.
" Deburs completed machine parts as time allows.
" Provides feedback to supervisor and programmer as to the performance of the program and tooling used for cutting the material.
" Verifies the accuracy of the parts using calipers, micrometers and other metrology equipment as a periphery inspection.
" Ensures machine and area around machine is kept as clean as practical.
" Operates CNC machine in a safe manner.
" Properly maintains coolant, including removal of containments, proper dilution ratio and cleaning.

Requirements
High school diploma or GED required
3-5 years of experience
Familiarity of the basic operation of CNC machine and the understanding of G and M code is preferred or the ability to learn is mandatory.
Other Skills: Ability to read engineering blue prints is desirable.

Preferred
Degree or diploma from technical/vocational school in CNC machining is strongly desired and most preferred.

Work Schedule
2nd Shift, M-F 4pm - 12:30am

 
Job Number: 175942
Job Location: Santa Maria, CA
Rate: Up to $19.00 DOE
Duration: Temp to Hire
Input Date: 12/19/2018
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Cabinetmaker II

Description:
PDS Tech is seeking an Cabinetmaker II  for an open position in Savannah, GA. 

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
 

Unique Skills:



Must be able to work any shift and overtime as required.




Education and Experience Requirements: 

High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.




 


 
Job Number: 1910105579
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/14/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX5IQAW&URLSource=cjhunter

Combat AirCraft Training Spec 5

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 

 
Job Number: 1910105893
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVqQAO&URLSource=cjhunter

Combat AirCraft Training Spec 5 - G

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 

 
Job Number: 1910105894
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVvQAO&URLSource=cjhunter

Combat AirCrft Trng Spec 5 -

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).
 
Job Number: 1910105892
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/19/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVlQAO&URLSource=cjhunter

Combat Aircraft Training Specialist - Secret

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 

 
Job Number: 1910105895
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYW0QAO&URLSource=cjhunter

Combat Aircraft Training Specialist 5

Description:
Chipton-Ross is seeking a Combat Aircraft Training Specialist 5 for an openings in Saint Louis, MO.

RESPONSIBILITIES:
EA-18G highly experience Pilot Subject Matter Expert to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

EDUCATION:
Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181309
Job Location: Saint Louis, MO
Rate: $DOE
Duration: 4 Months
Input Date: 08/27/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Daniel McGowan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmcgowan@chiptonross.com
Website: www.chiptonross.com

Product Engineer (Aircraft)

Description:
PDS Tech is seeking a Product Engineer (Aircraft) in Colorado Springs, CO
 
The Product Engineer will be responsible for mid to high complexity projects with high complexity-related to general engineering and technical process improvements.
 
They will:
  • Provide experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
  • Provide experienced engineering support for operations, supply chain, quality, technical publications and program management.
  • Provide sustaining engineering support to airlines and other aftermarket customers.
  • Update engineering documentation through Engineering change orders and Document Change notices.
  • Communicate with internal and external customers on a regular basis.
  • Lead teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
  • Provide root cause and corrective action investigations.
  • Have direct interface with external customers on engineering issue resolutions and product improvements.
  • Support after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained
  • Support Material Review Board (MRB) evaluation and disposition.
  • Ensure quality products utilizing company quality procedures.
  • Audit work areas for safety compliance.
  • Adhere to all company rules and codes of conduct.

Education
Bachelor of Science - STEM, Mechanical or Aerospace Engineer, General Engineering, Engineering Physics, or similar.
 
 
Job Number: 1910107491
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 10/09/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fNHaQAM&URLSource=cjhunter

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/12/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 10/29/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

Customer Service Representative

Description:
Chipton-Ross is seeking a Sales Administrator for an opening in San Diego, CA.

RESPONSIBILITIES:
This person will perform the role of sales administrator responsible for administration of new sales, repair and spares orders for the Customer Support Organization. This includes quoting prices and communicating availability of spare sales, tooling, rentals, exchanges and repairs. This role will be customer facing and will directly liaise with the Customer, Customer Support team and many internal Client teams such as procurement. This person will review customer purchase orders for correctness, enter the order, acknowledge purchase orders and track the status of customer open orders.

This person will be the primary Customer point of contact for sales orders, handling initial inquiries, quotes, proposals, order entry, order tracking, and schedule logistics.
" Ensure validity of the commercial conditions requested by the customer.
" Prepare basis of estimates for quotes for non-standard requests.
" Communicate regularly and proactively with customers providing input into the forecast. (RFQ, order, status, etc.)
" Track and manage all sales orders in SAP, customer portals, and internal reporting tools
" Status the customer and the internal organization keeping all parties informed of delivery schedule, logistics challenges, etc.
" Ensure zero default order processing (currency, price, and quantity).
" Invoice customer upon shipment of hardware
" Provide regular status updates to the customer. (Open order status, Delivery status, Airway bill).
" Acknowledge receipt of any request or question and ensuring that an answer is given in a timely manner.
" Ensure export control processes are being followed for this position.
" Demonstrates a proactive nature and ownership of all aspects of the Customer Support Administrator position and processes.
" Excellent interpersonal skills with good relationship building skills
" Ability to multi task, problem solve, proactive with good presentation skills and self-initiative
" Supplier assessments (risk, maturity, capability and capacity). Obtain information from suppliers concerning product and/or service specifications, price, delivery dates, etc.
" Support tactical buyer's team.
" Monitors supplier performance, prepares reports and other records pertaining to the items or service purchased, cost, delivery, product or service performance, supplier performance and/or inventories, as applicable. Support Internal Quality and Logistic departments in case of supplier non-performance

REQUIRED EXPERIENCE:
" Experience with SAP
" 5+ years of experience in Aerospace industry. Knowledge of Aircraft APU's (Auxiliary Power Units) preferred.
" Working knowledge and experience with SAP
" Able to develop standard commercial proposals; conduct order reviews; manage administrative processing of orders and customer follow-up in the context of the sales policy.
" Familiarity with the basic principles of the logistics flows internal and external to the company.
" Advanced capabilities with MS Office - Excel, Power Point, Word, Outlook
" Procurement: knowledge of the basic concepts of procurement.

Physical Requirements:
" While performing the duties of this job, the employee is regularly required to sit; use hands to type; use ability to talk and hear.
" The employee may be required to reach with hands and arms to manage paperwork.
" Specific vision abilities required by this job include close vision.
" The noise level in the work environment is usually quiet.

EDUCATION:
Accredited High School Diploma/GED, Bachelor's Degree (BA/BS) Preferred

WORK HOURS:
9/80. Monday through Friday.
Full-Time

 
Job Number: 182195
Job Location: San Diego, CA
Rate: $DOE
Duration: 5 Months
Input Date: 10/08/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

DCT 3

Description:
Lays out, fabricates and assembles a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges, and related tooling involving compound angels and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required. Plans work to be performed and determines methods and sequence of operations working from tool design drawings or own designs. Sets up and operates optical instruments to check overall and detailed alignment, fit, or adjustment of assemblies. Develops and designs holding devices and jig and fixture details. Prepares operational sequences and shop drawings covering parts fabrication and assembly to be performed by others. May monitor and verify quality in accordance with statistical process or other control procedures.
Qualifications:
 
Basic Qualifications:
JIG Builder and Machinist Background
Candidate must be able to work in and promote a team environment and promote a team paradigm.
Candidate must be able to work off of high ladders and portable platforms, perform heavy lifting, and capable of standing for long periods of time.
Candidate must possess good communication skills with the ability to document work performed or explain job delays.
Strong desire to work efficiently while working safely.
 Candidate will be required to work or support any shift as well as overtime as necessary to support the product.
 High School and 5 years related experience

Preferred Qualifications:
 
Tooling experience and Aircraft Structures training are desirable.
Experienced with Verisurf and LASER trackers are a plus
Experience with fabrication hand tools is a plus along with some experience with saws, drill, mill and lathe also being a plus.
 
Job Number: x20190134
Job Location: Palmdale, CA
Per Diem: $40/hr
Duration: 1 year
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

DCT Tech 4

Description:
Position Summary / Responsibilities
Lays out, fabricates and assembles a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges, and related tooling involving compound angels and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required. Plans work to be performed and determines methods and sequence of operations working from tool design drawings or own designs. Sets up and operates optical instruments to check overall and detailed alignment, fit, or adjustment of assemblies. Develops and designs holding devices and jig and fixture details. Prepares operational sequences and shop drawings covering parts fabrication and assembly to be performed by others. May monitor and verify quality in accordance with statistical process or other control procedures

Qualifications:
 
Basic Qualifications:
High School diploma or equivalent and 7 years of additional education and/or related work experience.
Jig Builder and Machinist Background
Must be able to work or support any shift as well as overtime necessary to support our statement of work.  
Candidate must be able to stand for extended periods of time, candidate must be able to climb ladders and stairs in order to gain access to the work areas
Preferred Qualifications:
Tooling experience and Aircraft Structures training are desirable.
Experienced with Verisurf and Laser Trackers are a plus.
Experience with fabrication hand tools is a plus with some experience with saws, drill, mill, and lathe also being a plus.
 
Job Number: x20190133
Job Location: Palmdale, CA
Rate: $50/hr
Duration: 1 year
Input Date: 10/02/2019
Last Updated: 11/19/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

Delegated Organization Process Specialist

Description:
We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

Responsibilities of the Delegated Organization Process Specialist
Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
Propose and execute on process improvement opportunities.
Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
Educate impacted parties on system changes and upgrades.
Support changes to JCAB requirements to facilitate all system improvements.


Requirements of the Delegated Organization Process Specialist

10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
Significant experience with process development/improvement
Strong knowledge of global certification requirements and compliance standards.
Experience interfacing with regulators to support certification activities.
Fluent in English, with Japanese language capabilities a bonus.
Previous experience in as an aviation authority employee or delegate is beneficial.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

Design Engineer ( Clearfield, Utah ) S9271212

Description:
Design Engineer ( Clearfield, Utah ) S9271212
12 month Contract

Pay Rate:$70-80/hr W2

Active Secret Clearance Required

Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

Top three skills:
Must have an active clearance with an investigation within the last 4.5 years
BS in Engineering with a minimum of 10 years related experience in design engineering function
Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
 
Job Number: S9271212
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 11/15/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Aircraft Interiors Design Engineer

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Manufacturing Engineer

Description:
General Summary:
The Manufacturing Engineer position is part of the ME Design Engineering team and is responsible for providing Electrical / Avionics technical support in the areas of manufacturing, design, development, and testing.

Duties and Responsibilities:
1. Take complete ownership of assigned A/C area(s).
2. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
3. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
5. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
6. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
• In lieu of bachelors’ degree, management may elect to consider candidates with a combination of work experience, education, and formal training.
2. 5+ years of directly related work experience within a Manufacturing or Production Engineering design team is required.
3. Previous project engineering and/or project management experience preferred.
4. Six Sigma Certification is a plus.
5. Experience in estimating/ quoting machine/ assembly hours and tooling costs a plus.
6. Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.

Knowledge, Skills and Abilities:
1. Proven knowledge of wiring harness manufacturing.
2. Proven ability to define standard electrical and avionics methods for installation/testing and the prevention of damage.
3. Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
4. Knowledge of AS9102 processes, procedures, and methods a plus.
5. Knowledge of Garmin Avionics Systems a plus.
6. CATIA V5/V6 experience is a plus.
7. Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
8. 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
9. Ability to analyze a variety of engineering data to help determine how to meet company objectives.
 
Job Number: 28-003
Job Location: Greensboro, NC
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1+ year
Start Date: ASAP
Input Date: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

DrivMatic Operator

Description:
Drivmatic, Riveting, Assembly, Manual

RESPONSIBILITIES:
" Performs a variety of DrivMatic, riveting and structural assembly operations
" Performs structural assembly, riveting and inspection operations of major components and assemblies
" Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
" Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
" Adheres to all applicable safety and operational procedures and directives
" Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
" Keeps work areas clean and orderly
" May be required to perform other duties as needed

REQUIRED EXPERIENCE:
" Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
" Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
" Structural assembly, riveting and inspection operations of major components preferred
" Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 179646
Job Location: Stuart, FL
Rate: $20 to $25.00 DOE
Duration: 6+ Months
Input Date: 06/03/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/28/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMC Engineer w/Top Secret Clearance

Description:
*This is a full time, 15 month position, based in Fort Worth*



We are hiring for an aircraft Electro Magnetic Compatibility Systems Engineer who will be creating EMC/EME requirements definition/compliance testing. Candidate will travel to many company sites to define the EMC requirements of the site, analyze and test equipment, systems, and aircraft to assure proper operation within the electromagnetic spectrum. Candidate will create design authority for electrical bonding, wire harness and other shielding, wire routing, and electrical ground system design



Required:
*8 years’ experience as a system or similar engineer in aircraft component EMC compatibility testing.
*Knowledge of MIL-STD 464 and 461
*Experience using tools such as PSpice (ORCAD), MATLAB and EXCEL.
*Active Top Secret Clearance; US Citizens only.
*Able to travel to company sites, 1-2 weeks at a time.
 
Job Number: 106
Job Location: Fort Worth, TX
Rate: market
Per Diem: yes split
Input Date: 09/09/2019
Last Updated: 10/16/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: Mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/29/2019
Last Updated: 11/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Installer

Description:
Chipton-Ross is seeking an Electrical Installer for an opening in Cypress, CA.

RESPONSIBILITIES:
An Electrical Installer is responsible for installation and attachment of aircraft interior electrical components using engineering drawings, company and customer specifications.
" Adheres to company specifications, work instructions, engineering prints and work orders.
" Documents the materials used in the process to maintain traceability.
" Interprets and reads engineering drawings to ensure accurate part manufacturing.
" Installs wire harness, electrical control modules, electrical connectors and other electrical assemblies or components, using installation drawings, wiring diagrams, customer and company specifications.
" Performs intricate tasks including stripping, crimping and soldering of wires.
" Uses hand tools and manually operated machines and uses of electrical equipment, such as heat guns and soldering irons.
" Confers with Quality Inspectors and Electrical and Design Engineers to resolve electrical installation problems, incomplete documentation and data interpretation

REQUIRED EXPERIENCE:
Minimum 2 - 5 years.
Computer Skills: Basic skills
Other Skills: The ability to read and write at a level necessary for successful job performance.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5:00 pm -1:35 am pm must be available for OT
Full-Time

 
Job Number: 181905
Job Location: Cypress, CA
Rate: $14 to $18.00 DOE
Duration: 6 Months
Input Date: 09/23/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.




The Structures Company is an AA/EOE.
 
Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/11/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Systems Engineer

Description:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
• Technology focal for motor / motor controllers
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Preparation and presentation of technical data in design reviews
• Review and approval of Qualification Test Plans, Procedures and Reports

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical / Electronic Engineering, Master’s degree preferred
• 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

Knowledge, Skills and Abilities:
• Knowledge of aircraft electrical power systems
• Knowledge of system modeling and analysis tools
• Knowledge of motor / motor controller theory and application
• Knowledge of FAR Part 23 or 25 regulations preferred
• Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
 
Job Number: 28-005
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: mat@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Role Summary/Purpose
The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

Essential Responsibilities
In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

In addition, as a Systems Engineer, you will:

• Design Power Systems Architectures in co-operation with aircraft manufacturers
• Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements
• Derive system interfaces
• Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements
• Perform system analysis, safety analysis, modeling, and simulation
• Develop the systems test environment
• Development system test plans and procedures and get their approval with the customer
• Work on developing and releasing test reports to customers
• Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program
• Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals
• Maintain scope baseline
• Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations
• Document the results of analyses and studies in technical reports
• Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
• Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures
• Support technical and program reviews

Qualifications/Requirements

• Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering
• Experience in requirements development, verification and validation
• Experience in system engineering and project management/planning
• Knowledge of aircraft power distribution and generation
• Clear thinking and diligent approach
• Strong interpersonal and communication skills

Desired Characteristics

• Knowledge of electrical power systems technical requirements, certification requirements
• Experience/ knowledge of the development lifecycle phases
• Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs
• Good written and verbal communication skills.
• Proven ability to contribute in a team environment
• Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard
• System mindset and problem solver
 
Job Number: 35475
Job Location: Dayton, OH
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Magnetic Effects Engineer (EME)

Description:
Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
• Provide aircraft level EME guidance
• Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
• System design and architecture analysis
• Interact directly with suppliers
• Define traceability to the FARs
• Perform and teach electromagnetic compatibility design and analysis
• Perform computational electromagnetics calculations and assessments
• Validate and verify of requirements
• Provide guidance for System test and certification
• Report Status
• Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
• Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the EME discipline.
• EME systems design and integration experience
• Aircraft development experience
• Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
• Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 08/09/2019
Last Updated: 11/13/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electronic Systems Design & Analysis Engineer 3

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 11/20/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aide - Clearance MD

Description:
166406
Job Title: Engineering Aide

Work Site Address: Patuxent River, MD 20670
Job Number: 2032-1
Max Pay Rate: $25.00/hr
Start Date: 10/1/2019
End Date: 7/6/2020
Position Type: Contract

Job Summary:
Provides technical support to engineers on a variety of technical tasks.

Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes. Inspects aircraft engineering drawings for impact to aircraft mass properties. Performs mathematical calculations using established formulas and prescribed guidelines Uses provided computer asset in performance of analyses and development of documentation/reports. May conduct tests and record data to assist with engineering evaluation or analysis. Develops and refines engineering software tools against provided requirements.

Qualifications and Education Requirements
Basic Qualification: BS in Engineering not required, Associates degree is sufficient. Candidate should have ability to read and interpret engineering drawings, drafting capability not required. Familiar with VBA and C++ programming languages.

Desired Skills: Familiar with CATIA and VAS for engineering drawing inspection. Proficient with VBA and C++ programming languages.

Skills: Category Name Required Importance Experience
Software Skills C++ Yes 1 1 - 2 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 1 - 2 Years
Technical Skills VBA Yes 1 1 - 2 Years

Qty 1 position required
 
Job Number: JE-2032-1S
Job Location: Patuxent River, MD, MD
Rate: 25/hr max
Duration: 9 months +
Input Date: 10/02/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/25/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F-35 Project Management Support CA

Description:
165930 Job Title: F-35 Project Mgmt Support

Work Site Address: 1 Space Park Blvd, Redondo Beach, CA 90278
Job Number: 1795 (19023764)
Max Pay Rate: 38.00
Start Date: 8/19/2019
End Date: 08/14/2020
Position Type: Contract



Job Description:
Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Assist with development of proposal Basis of Estimate (BOE) artifacts and supporting rationale documentation. Must possess excellent interpersonal, written and oral communication skills. Position requires a resourceful, independent self-starter able to analyze and solve CAM derived objectives involving solicitations of and commitments from various stakeholders.


Qualifications and Education Requirements

•Solid background and understanding of Project Management fundamentals
•Bachelor’s degree
•3 years of relevant experience
•Proficient in applying Cost Account Management/Earned Value principles
•Adept in developing products in MS Word, Excel, Project and Power Point
•Exceptional verbal, written, presentation, and leadership skills
•Bachelor degree from an accredited college

Preferred Skills

•Cost Account Management / Professional Logistics Accreditation(s)
•MS Access proficiency (creating queries, forms, reports and code/VBA)
•Six Sigma Certification / Facilitation experience
•Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
•Familiarity with the F-35 program/platform a plus

Location: Redondo Beach
Schedule: 9/80
Duration of assignment: Up to 1 year
 
Job Number: JK-1795ATO
Job Location: Redondo Beach, CA
Rate: 38/hr max
Duration: 1 year
Input Date: 11/04/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FOD (Foreign Object Damage/Debris) Specialist (Top secret (Yankee White) clearance)

Description:
PDS Tech is seeking a Foreign Object Debris/Damage (FOD) Specialist in Patuxent River, MD
 
Top secret (Yankee White) clearance required.



Seeking an experienced, customer focused, self-motivated individual to join the team as an FOD Specialist.  The FOD Specialist will manage and direct a team of employees engaged in activities related to the management of tool cribs and tooling for manufacture and testing of aircraft.  The Tool & FOD Control Manager will also develop, implement, and enforce FOD prevention programs for the site.  This position requires a broad knowledge of company administration policies, procedures, practices and related manufacturing business concepts and their applications.  


Job responsibilities include the following:

  • Enforce and enhance company FOD and tool control processes and procedures at the FAFO site.
  • Plan and direct tool crib activities necessary to meet the goals of the department and company in accordance with established quality and safety standards.
  • Create a workplace environment where quality improvement tools are used effectively to achieve “world class “operations and enterprise excellence objectives.
  • Ensure applicable product quality, aviation/product safety, and workplace health and safety requirements imposed by customers, government oversight agencies, and company executive management are met.
  • Assess training requirements to ensure all direct reports receive appropriate training.

Basic Qualifications
  • Bachelor’s degree or equivalent work experience
  • 2+ years of prior experience in an aircraft maintenance, inventory control, or manufacturing operations environment.
  • Strong team building skills, preferably leading hourly bargaining unit associates.  Demonstrated ability to establish and maintain engaged and productive working relationships.
  • Demonstrated ability to effectively prioritize and manage multiple tasks and responsibilities in a fast-paced environment.  Must be a self-starter who is resourceful and takes initiative.
  • Must possess strong interpersonal skills with the ability to effectively interface with all levels of the organization, suppliers, customers, and governmental oversight organizations.
  • Demonstrated ability to effectively communicate orally, in writing and in group sessions as a member or leader.
  • Must be customer focused and a team player.
  • Must be enthusiastic with a positive outlook and possess a “can-do” work ethic.
  • Must demonstrated experience identifying and implementing continuous improvement initiatives.
  • Must possess general aviation knowledge.
  • Ability to effectively utilize common business computer software such as MS Office and PowerPoint.

 Desired Skills

  • Previous experience managing flight line tool cribs, tool / FOD control programs
  • Prior leadership experience
  • Previous aircraft manufacturing and/or maintenance experience especially rotary-wing aircraft

 
 
 
Job Number: 1910102807
Job Location: Patuxent River, MD
Duration: 15 months
Input Date: 10/08/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jJ7QAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue & Damage Tolerance Engineers Needed

Description:
-Fatigue and Damage tolerance experience on primary and secondary airframe metallic structure required. MUST BE US Persons
•Strong background in classical stress analysis.
•Experience with Catia V5 to support stress analysis and drawing release.
•Experience with reviewing 2D drawings.
•Ability to work independently under limited supervision.
•Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
•Experience with Patran/Nastran is a plus.
•Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng exp

The Structures Company LLC is an AA/EOE.
 
Job Location: Savannah, GA
Rate: $75-80/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 04/17/2019
Last Updated: 10/15/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Fatigue and Damage Tolerance Engineer

Description:
Chipton-Ross is seeking a Fatigue and Damage Tolerance (F&DT) Engineer for an opening in Arlington, TX.

RESPONSIBILITIES:
Structural analysis tasks in support of Airframe Structural Test and Certification. Tasks can include:
" Perform F&DT tasks related to trade studies to determine best design approach to meet airframe design requirements.
" Provide F&DT support for design layouts, including determination of optimum loads paths, material and hardware selections, and least weight / low cost designs.
" Provide F&DT sizing and analysis for airframe preliminary design.
" Provide sizing updates and final analysis for detail design releases.
" Calculate fatigue life and inspection intervals of airframe components
" Prepare F&DT certification reports
" Preparation of test requirements, test plans, test reports, internal loads correlation, and other analysis and documentation related to structural testing
" Communicate with internal and external team members effectively.

REQUIRED EXPERIENCE:
Fatigue and Damage Tolerance (F&DT) engineer experienced with metallic and composite airframe, or related structures. Provides fatigue and damage tolerance analysis support for new product development from conceptual through detail design. Some knowledge and experience is required in the following areas, with substantial experience and expertise in many of these areas:
" Airframe structural criteria / requirements
" Aircraft Fatigue spectrum development
" Aircraft Fatigue analysis and life prediction
" Aircraft damage tolerance analysis and inspection interval calculation using NASGRO or similar tools
" Calculation of stress concentrations using classical and FEA methods
" F&DT report preparation
" F&DT support for manufacturing and change board
" F&DT support for structural test including coupon, design development, component and full-scale static and fatigue, and flight test
" F&DT support for damage limits, structural repairs and mods to support repair limits and structural repair manual preparation.
" Trade studies
" Preliminary and final sizing analysis
" Stress analysis using hand analysis calculation methods
" Concept development for least weight designs

Candidate must have proficiency in extracting internal loads from finite element coarse grid models and applying those loads for use in static strength and F&DT analysis. Tools utilized may include CATIA, MSC PATRAN / NASTRAN, TMP SLIM and Vision, and a variety of other software applications related to airframe structural analysis and design. Tools for fatigue and damage tolerance analysis include NASGRO, Mechanica, StressCheck and a variety of other software applications related to airframe structural analysis and design. Excel VBA coding experience is desired.

EDUCATION:
Accredited Bachelor's degree Mechanical, Civil or Aerospace Engineering from an accredited university and a minimum of ten years of related experience. A Master's degree is preferred.

WORK HOURS:
Full-Time

 
Job Number: 181980
Job Location: Arlington, TX
Rate: Up to $75.00 DOE
Duration: 6+ Months
Input Date: 09/27/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Fill & FairAssociate

Description:
Chipton-Ross is seeking a Fill & Fair Associate for an opportunity in Cypress, CA

RESPONSIBILITIES:
Prepare aircraft interior parts for decorative material application by filling and fairing plastic, metal, and composite parts and units using filling material.
" Adhere to company specifications, work instructions, engineering prints, and work orders.
" Document the materials used in the process to maintain traceability.
" Clean panels in preparation for filling and fairing.
" Mix and apply filling material to aircraft interior parts.
" Fair parts after application and drying of filler.

REQUIRED EXPERIENCE:
" 1-3 years of experience in comparable role
" Must be able to read and speak English
" Previous experience in aerospace, manufacturing or automotive painting is preferred

Preferred Qualifications:
" Ability to read and interpret drawings and blueprints preferred
" Previous experience in Aerospace Manufacturing preferred
" Ability to understand and communicate in English (speak, read and write) at a level necessary for successful job performance

Position Criteria:
" Demonstrated ability in mixing and applying bondo, and subsequent inspection and sanding
" The ability to read and write at a level necessary for successful job performance
" Ability to work in a team environment; amicable

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time
2nd shift 5:00pm-1:35am
M-F + occasional voluntary Saturday + Daily OT

 
Job Number: 180312
Job Location: Cypress, CA
Rate: $DOE
Input Date: 07/11/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Must have aircraft experience working mechanical and structural jobs.



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107279
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/04/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beabout
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMMbQAM&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.

Unique Skills:

Excels working in Team environment



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107120
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fLjSQAU&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 


Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Works well in a team environment, brings positive attitude and energy to the team along with willingness to learn.



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 

 
Job Number: 1910107214
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM2nQAE&URLSource=cjhunter

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.


Unique Skills:



Able to use hand tools. Detail oriented people.




Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107284
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 09/26/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kendra Agnew
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMNAQA2&URLSource=cjhunter

Flight Control Engineer

Description:
We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

Responsibilities of the Flight Control Engineer

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
Author flight test and ground test specifications for Flight Controls Systems.
Analyze test data and evaluate system operation.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Prepare test reports.
Evaluate requirements for traceability, correctness, and completeness.
Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
Initiate and validate improvements to the design and documentation of the Flight Control System
Ensure all schedule and cost objectives are meet as described.


Requirements

Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
7 plus years of experience with flight controls in terms of both software and hardware.
Excellent communication skills both written and verbal.
Expert knowledge of ARP 4754 and DO178C.
DER, UM, DAD Certification active or previous is highly preferred.
 
Job Location: Renton, WA
Input Date: 11/14/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Flight Control System Integration Engineer

Description:
In this role you will work and lead activities of Pilot Control System (PCS) as part of Secondary Flight Control System. This will include interfacing with all other aircraft functions and engineering team members to coordinate and obtain the approval of any task assigned contributing to the aircraft ‘Flight Control System’ Development and Certification.

Scope of Work:
1)     PCS System Engineer will work as a team member of Flight Control System Design Group - Secondary Flight Controls IPT.
2)     Basic work scope is to develop and finalize aircraft T/C design, compliant to all applicable Requirements, under company schedule. This activity includes:
i)       Evaluating the current aircraft design, with respect to compliance to the Flight Controls System/PCS related airworthiness regulations of JCAB, FAA and EASA.
ii)      Lead the technical direction with design authority for all integration and development requirements.
iii)     Coordinating integration of design change activities originated from Flight Controls System/PCS requirements when required.
iv)    Oversight on design solutions engineered through requirements based management, complying with CFR 14 Part25, ARP4754A, DO178b, DO254, etc.
v)     Support discussions and presentation of Flight Controls System Compliance with the Regulatory Authorities.
vi)    Executing the requirements of the Type Certification Plan for ATA 27 Flight Controls. 
vii)   Reporting on work status and progress through regular technical and program governance to upper management.
viii)  Execute the plan, schedule and priorities directed by IPT and upper management. Where deviation to plans exists, proposed alternative methods or recovery plans to secure program objectives. 
ix)    Responsible to ensure Flight Controls System/PCS schedule is complete, correct, updated and meet program objectives/milestones.
x)     Responsible for Flight Controls System/PCS deliverables are released under program dates. Coordinate with other areas as required.
xi)    Support other ATAs, IPTs and Departments (Customer Support, Flight Test, RIGS etc.) in relation to ATA27 dependencies to ensure they meet program milestones.
xii)   Responsible for technical requirements integration with applicable Flight Controls System/PCS suppliers and other interfacing suppliers as appropriate.
xiii)  Provide leadership and expertise to assist in resolving the Flight Control System Design Group performance during any rig testing or flight testing.
3)     All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.

The primary work location will be in Nagoya, Japan. However, engineers maybe requested to travel or relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. 
Basic Qualifications
​- Working experience in commercial aerospace
​-10 or more years of experience as Compliance Engineer for Flight Controls System
​-Good communication skills in English


 
 
Job Number: 1910106041
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/04/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYy7QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 10/18/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 10/15/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Flight Controls Engineer

Description:
Responsibilities
·       Evaluate requirements for traceability, correctness, and completeness
·       Provide analysis and input as required to verify compliance with ARP4754A and DO178C
·       Provide specialized technical assistance to team members as needed
·       Initiate and validate improvements to the design and documentation of the Flight Control System
·       Maintain schedule and cost objectives
Minimum Qualifications
·       Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
·       7+ years of experience in flight controls of Aircraft in both software and hardware
·       Demonstrated communication skills to convince, justify and influence
·       Expert understanding of ARP 4754, and DO178C
·       DER / UM / DAD / Certification Engineer, active or previous – preferred
 

 
Job Number: 1910106255
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/12/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fHHlQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer

Description:
Here's the Deal
As the Flight Deck Design Engineer you will report directly to the Flight Deck Manager and will be responsible for the design and integration of the flight deck for a business jet.

On any given day you might:
• Design and develop the Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the Flight Deck mock-up
• Assist in the creation of the Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-030
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer

Description:
• Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements
• Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 08/09/2019
Last Updated: 11/13/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Flight Deck Design Engineer - Avionics

Description:
• Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements
• Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention


We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design




The Structures Company is an AA/EOE.
 
Job Number: 330
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 11/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Flight Line Inspector

Description:
Chipton-Ross is seeking 2 Flight Line Inspector's for openings in Mesa, AZ.

RESPONSIBILITIES:
The successful candidate must have AH-64 experience in: product acceptance / inspection techniques, Non-Conformance Management (NCM), preflight, post flight, special inspections, flight control systems (assembly/rigging), hydraulic systems, engine / APU assembly installation and operation, Drive system assembly/installation and Flight Safety Parts. Additional requirements but not limited too are: ability to work in confined spaces requiring kneeling, crawling, climbing, and bending, knowledgeable and able to interpret and work from blueprints, Helicopter Process specification (HP), sketches and written, familiar with Army aircraft log books and DA PAM 738-751, and verbal instructions.Additionally, the successful candidate must be comfortable working in a team environment supporting a dynamic production flight test area. Works under minimal direction.

REQUIRED EXPERIENCE:
AH-64 experience, strong communication, effective teaming and collaboration skills are required.

EDUCATION:
Accredited vocational or military training or an Associate's degree and 3 to 5 years work related experience or an equivalent combination of education and experience.

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position is primarily a 2nd shift, however the successful candidate may be assigned to work alternate shifts as required to support production.
 
Job Number: 182178
Job Location: Mesa, AZ
Rate: $DOE
Duration: 8 Months
Input Date: 10/08/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Michael Olivarez
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: molivarez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Loads Engineer

Description:
Flight Loads Engineer

Location: Philadelphia, PA

Responsible for determination of flight loads and ground loads to ensure the aircraft design is structurally sound. Develop documentation to show compliance with structural design maneuvers.



Job Responsibilities:

• Define and validate aircraft flight and ground loads through simulation and flight test data analysis of AW609 tiltrotor structural design maneuvers. Utilize knowledge of aeromechanics to ensure analysis and results can be used to show compliance with certification rules.


• Modify flight simulation script files to improve efficiency, ensure simulated maneuvers are compliant with regulations, and produce sensitivity studies of various aircraft configurations.


• Deliverables include flight simulation time history data, well commented scripts (python, pearl, bash), recommendation and conclusions of analysis conducted.


• Support activities and requests from the FAA related to flight loads analysis and methodology.


• Provide support analysis for activities lead by Aeromechanics disciplines (Aerodynamics, Handling Qualities, Structural Dynamics, Rotor Dynamics), Flight Controls, and Flight Test teams.


Qualifications:


• Must be a US Person (Citizen or Green card) to operate ITAR controlled flight simulation software


• BS degree in Engineering; MS degree Aeronautical Engineering preferred


• 5+ years’ experience in a technical leadership capacity related to aircraft aeromechanics, aerodynamics, guidance navigation and controls (GNC), experimental flight test, flight loads definition/validation, flight simulation, handling qualities, or flying qualities.


• Experience with scripting languages such as Pearl, Python, Matlab, Octave


• Experience developing structural design criteria and/or performing flight and ground loads testing, simulation, and analysis


• Strong analytical skills. Ability to understand complex systems and aircraft flight characteristics.

• Strong written and verbal communication skills. Ability to communicate at all levels of the organization, identify solutions in the presence of conflict and ambiguity



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57678
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 10/03/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Technical Writer

Description:
Flight Technical Writer (L3) 

Location: Shelton, CT



Summary/Objective



Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring flight manuals (i.e., Operator’s manuals and associated Checklists).  This position is in support of contracted technical manual revision services and the creation of new publications.



Areas of Responsibility/Essential Functions



Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft flight publications.
Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft flight publications
Research, writing, and development of portions of aircraft flight publications according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature. Judgment required compiling and selecting technical data for text and illustrations
Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of  aircraft flight publications
Provide frequent status to supervision
Meet established internal and external delivery milestones
Interface with engineers and pilots over the content and review of the publications when required
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.


Competencies



Technical Skills, Knowledge, and Abilities



Ability to write flight procedures from engineering drawings, specifications, performance data, or other similar literature
Ability to write operator procedures for aircraft with integrated avionics suites (i.e., “glass cockpits”)
Familiarity with the operation of aircraft systems
Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
Ability to read and interpret original equipment manufacturer (OEM) manuals
Ability to read and interpret military and commercial specification and standards
Strong analytical and complex problem solving skills
Ability to self-edit written and graphical work
Proficient with desktop publishing using content management software
Proficient with SGML/XML structured document authoring such as EpicEditor or equivalent
Proficient with various research (i.e., customer-specific) applications for technical issues
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
Preferred, but not required:
Military and/or civilian pilot license
Military and/or civilian flight experience
Experience with rotary wing aircraft
A&P mechanic’s license, or equivalent military experience in aircraft maintenance
Ability to use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software


               Interpersonal and Communication Skills



Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
Ability to work collaboratively with others
Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
Ability to demonstrate initiative and be self-motivated
Organizational skills
Time management skills
Detail orientation
Task and goal-orientation
Quality-driven
Responsive and time-sensitive to customer’s delivery schedule
Strong, customer-focused work ethic and positive attitude
Ability to mentor less experienced and knowledgeable writers on the team


Work Experience



Minimum 2 years technical writing experience



Required Education



Requires advanced knowledge of technical publications writing.  Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor’s degree, or equivalent trade experience


Supervisory Responsibility



This position has no supervisory responsibilities.



Work Authorization/Security Clearance



Work authorization: Must be a U.S. person with the ability to work in the U.S.
Security clearance: Required for some assignments at Top Secret level


Work Environment



This position operates in a professional office environment.
This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.


Travel



Limited travel maybe required to support validations.





Additional Eligibility Qualifications



None



Special Demands



None



Other Duties



Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice due to business needs.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57052
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 09/30/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Flight Test Engineering Manager

Description:
PDS Tech, Inc is seeking a Flight Test Engineering Manager for a direct position in Moses Lake, WA.
As a Flight Test Aircraft Manager, you are the senior program manager responsible to the Director, Flight Test Team for your assigned Flight Test Vehicle’s (FTV’s) work scope, performance, and schedule. To be successful in this role you will use your Flight Test Program Management skills daily.

  Responsibilities:
  • Assign work, goals to your FTV team to maintain flight test schedule
  • Carry out flight test activities, planning, hazard analysis, readiness, and risk/safety reviews
  • Oversee and confirm aircraft configuration for flight tests
  • Perform technical review and processing of specific aircraft test planning documents
  • Ensure flight/ground test readiness while avoiding schedule delays
  • Provide daily and weekly FTV status
  • Resolve issues with functional leads, including engineering, instrumentation, supply chain, maintenance/quality, flight operations, and suppliers

Minimum Qualifications:
  • Bachelor’s degree required in an engineering discipline (or other technically relevant field), with a Master’s degree, preferred
  • 5+ years of managerial experience in aerospace/aviation
  • Demonstrated ability to coordinate programs across teams, create and manage schedule and budgets.
  • Demonstrated ability to lead cross-functional teams in a complex, dynamic environment with polished presentation skills.
  • Comprehensive knowledge of CFR Part 21 and 23 or 25, knowledge of aircraft design, testing and certification, testing operation duties including flight test, structural testing, and instrumentation
  • Willingness to work extended hours and weekends along with travel associated with aircraft testing deployments

 
Preferred Qualifications:
Comprehensive Knowledge of the following:

  • Aircraft performance
  • Stability and Control
  • Aerodynamics
  • Thermodynamics
  • Flutter

 
Job Number: 1910107246
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/03/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM8WQAU&URLSource=cjhunter

Flight Test Instrumentation Engineer

Description:
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system.
Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.
Flexibility to make business travels and also possible relocation between Japan and US are expected.

Responsibilities:
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Bachelor degree along with a minimum of 1 year of flight test operations experience
-Or-
A minimum of 5 years experience in flight test operations in lieu of the degree
Excellent demonstrated verbal and written communication skills
Ability to defuse and resolve conflict among other team members
Ability to quickly learn new software and systems
Must be capable and comfortable working within a diverse team environment
Strong oral, written, and presentation communication skills

Desired
Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
Experience in design of instrumentation installation of sensors, wiring and equipment
Ability to perform strain gage installations
Knowledge of flight test operations and certification requirements.
Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols
Knowledge on telemetry and data monitoring systems

 
 
Job Number: 1910107312
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/26/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMT0QAM&URLSource=cjhunter

Fuel Systems Designer

Description:





PDS Tech is currently recruiting for an Fuel Systems Design Engineer in Greensboro, NC.

General Summary:


The Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration.  This designer will join an established design team to execute design changes for aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.  

Duties and Responsibilities:
  • The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
  • This role will interface with the engineers within the department as well as other departments and organizations in the company during the development of the design package 
  • The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

 
 






Qualifications
 
Education, Work Experience, Certification and/or Licensure:
  • Bachelor’s degree in an engineering related discipline
  • Minimum of 3 years of previous design experience 

 
Knowledge, Skills and Abilities:

  • Proficient in CATIA V5
  • Familiar with Microsoft Office Products
  • Familiar with FAR Part 23 or Part 25
  • Familiar with Industry standards

 
Job Number: 1910096747
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 11/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r65jQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Project Engineer

Description:
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.

The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.

They will:
• Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
• Support and manipulate Microsoft based tools in support of project schedule and status.
• Communicate with other program integrated product teams.
• Compile and analyze performance reports.

The ideal candidate will have:
• Superior business and data skills,
• Knowledge of IMS based project management and can work in a team environment.
• Understanding of Aerospace, Helicopter and / or development program experience
• Knowledge of mechanical / structural design and test

Looking for someone who can jump in, learn the tools and support this ambitious test program. Someone who has been around development programs, engineering and / or even test. The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
Job Number: 1910107247
Job Location: Stratford, CT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 10/04/2019
Last Updated: 10/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Hand Mill Operator

Description:
Chipton-Ross is seeking a Hand Mill Operator for an opportunity in Huntington Beach, CA

RESPONSIBILITIES:
Assembles aircraft interior electrical components, harnesses, connectors, etc. using engineering drawings, company and customer specifications.
Assemble wire harnesses, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tool drawings, wiring diagrams, customer and company specifications. Intricate tasks include stripping, crimping, and soldering of wires, use of hand tools and manually operated machines, use of electrical equipment such as heat guns and soldering irons. Confer with quality control inspectors and electrical engineers to resolve assembly problems, incomplete documentation and data interpretation.
" Adheres to company specifications, work instructions, engineering prints and work orders.
" Documents the materials used in the process to maintain traceability.
" Assembles wire harness, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tooling drawings, wiring diagrams, customer and company specifications.
" Performs intricate tasks including stripping, crimping and soldering of wires.
" Uses hand tools and manually operated machines, uses electrical equipment such as heat guns and soldering irons.
" Confers with Quality Inspectors, Electrical Engineers and Production Manager to resolve assembly problems, incomplete documentation and data interpretation.
" Safely handles various regulated materials used in the process.
" General Notes:
o Must carefully handle raw material and manufactured parts to ensure the integrity and quality is not compromised by handling.
o All employees have an affirmative duty to protect and maintain the confidentiality of C&D products.
o As business conditions change it is necessary that all employees productively react and handle other essential tasks as assigned now or in the future.
o Tasks may vary slightly based on products produced at division.

REQUIRED EXPERIENCE:
0-3 years.
Other Skills: The ability to read and write at a level necessary for successful job performance.
Entry level.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
M-F 1st 6am -2:30pm
Full-Time/First Shift

 
Job Number: 179855
Job Location: Huntington Beach, CA
Rate: Up to $13.25 DOE
Input Date: 06/12/2019
Last Updated: 11/20/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com