Job Search Results

692 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 04:18PM Pacific Time by ContractJobHunter. )

Listings 1 - 692

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Engine and Propeller Rigging URGENT SC

Description:
166498 Job Title: APG Mechanic
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Start Date: 10/21/2019
End Date: 12/31/2019
Position Type: Contract

Job Summary:
This role has 3 open positions that the hiring manager is very eager to fill. Please send qualified candidates ASAP.

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging exp desired

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years



Qty 3 positions required
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JEG -1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer

Description:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the technology roadmap
• Provide validation and verification of air data systems requirements


We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

The Structures Company is AA/EOE.
 
Job Number: 324
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembler - 10 openings / F-16 F-35 C-130 FL

Description:
Job Title: Aircraft Assembler
Work Site Address: Pinellas, FL 33782
Job Number: 472802
Max Pay Rate: $22/hr
Start Date: 8/27/2019
End Date: Contract to LM Employee
Position Type: Contract to hire possible

Job Summary:
Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print.

Job Description:
Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

Qualifications and Education Requirements
1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required.
Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred.
Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred.
Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.
High School Diploma or equivalent.
Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.


M,T,W,Th 10 Hours, Friday Off
6:00am to 4:30pm. Or 6:30am to 5:00pm
 
Job Number: LMPIN-472802
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: CTH
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.



The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Generation Equipment SC

Description:
Job Title: Aircraft Generation Equipment
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2111-1
Max Pay Rate: $32.00/hr
Start Date: 10/7/2019
End Date: 12/31/2020
Position Type: Contract


Job Summary:
Installs, operates, maintains, repairs and modifies equipment. Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations.

Roles and Responsibilities
Analyzes and evaluates products and related performance. Troubleshoots and diagnoses malfunctions to eliminate problem in minimum time. Installs, upgrades and removes products ensuring coordinative engineering field change. Maintains effective customer communications and relations. May provide onsite training of customer support personnel.

Skills: Category Name Required Importance Experience
Areas of Expertise Diagnostic and Repair Procedures Yes 1 6+ Years
Soft Skills Troubleshooting Yes 1 6+ Years
Technical Skills Diagnostic and Repair Yes 1 6+ Years
Technical Skills Electrical Diagnosis/Repair Yes 1 6+ Years
Technical Skills Understand of automotive repair Yes 1 6+ Years

Qty 1 position needed
 
Job Number: JEG -2111-1
Job Location: Greenville, SC
Rate: 32/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic or (Automotive Trade School experience)

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs, modifications and assembly on Airframe and Driveshaft components in accordance with approved data.

Assigned Duties:
• Work independently with limited supervision.
• Use precision measuring instruments and gauges such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s,
OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Drill, ream, tap, change studs, install helicoils, install bushings and liners by shrink fitting and arbor press.

Experience Required
• High School Diploma or Equivalent required
• Automotive trade school preferred

FAA Airframe license preferred but not required.
 
Job Number: 1910105868
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Systems Engineers - China - Contract

Description:
Avionic Systems Engineers - China - Contract.

Our Client in China is developing Cockpit Display Systems for the latest commercial aircraft. They are looking to add several Avionic Systems Engineers to work on  Specification Development and Modelling Development.

The chosen Engineers should be familiar with civil aircraft subsystems function, logic and physical architecture and modelling process. For the modelling development role, an engineer with a Software background is preferred.

Candidates should be prepared to work in China for up to one year on a contract basis.
 
Job Number: BH-226
Job Location: China, China
Rate: Negotiable
Per Diem: --
Overtime: --
Start Date: 09/30/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

Description:
166338 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2095-1
Max Pay Rate: $29.00/hr
Start Date: 10/7/2019
End Date: 1/31/2020
Position Type: Contract

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Job Description:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
• Experienced in troubleshooting and flight line operations a must

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



Qualifications and Education Requirements
Needs to be really experienced in troubleshooting and flight line operations

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

Qty 1 position needed
 
Job Number: JEG-2095-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

Description:
165856
Avionic Technician
Greenville,SC 29605
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


Qty 3 openings
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG -1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
Experience with aircraft systems

Desired Skills:
1. Experienced in design, development, integration and test of datalink systems.
2. Familiar with DoD contracting and product acquisition.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11681
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired Skills:
1. MATLAB and/or C++ for analysis tool development
2. Familiarity with JSF avionics suite and systems engineering processes.
3. Familiarity with data analysis tools (e.g. Matlab)
4. Familiarity with JSF tools including SIMS and Dimensions
5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11628
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in a related technical field
2. Experience with mission systems/avionics

Desired Skills:
1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
4. Prior supplier management experiences a plus.
5. Familiarity with JSF toolsets: SIMS & PDM.
6. Current F-35 program experience and clearances.
7. Must be able to acquire a SAR clearance.
8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11623
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS in technical discipline and at least one year professional experience
2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired Skills:
1. Knowledge of RF, EW and/or CNI
2. Ability to understand and apply electronics engineering principles to development
3. Experience developing subsystem design/engineering documentation.
4. A working knowledge of tools for requirements and verification Traceability.
5. Experience with Agile Methodology
6. Ability to work with suppliers to generate verification and validation plans
7. Strong oral written communication skills
8. Strong interpersonal and collaboration skills
9. Strong work ethic and self-motivation

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11625
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer (Active Clearance)

Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
Comments for Suppliers: Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.
 
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166417
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2147-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+0-3 YRS
Basic Qualifications
BS in technical discipline and at least one year professional experience
Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired skills
Knowledge of RF, EW and/or CNI
Ability to understand and apply electronics engineering principles to development
Experience developing subsystem design/engineering documentation.
A working knowledge of tools for requirements and verification Traceability.
Experience with Agile Methodology
Ability to work with suppliers to generate verification and validation plans
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation

Qty 1 position
 
Job Number: JE-2147-1S
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166415
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2084-1
Max Pay Rate: $62.26/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

CNI, Radar, EW, or related avionics functions technology, and product development experience.
Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Basic Qualifications
Bachelor's degree in a related technical field
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2084-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician / Avionics modification experience / URGENT URGENT SC

Description:
166011 Job Title: Avionics Technician

Work Site Address: Greenville, SC 29605
Job Number: 1968-1
Max Pay Rate: $29.00/hr
Start Date: 9/2/2019
End Date: 12/19/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qty 3 positions needed
The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

Areas of Expertise P-3 No 3 4 - 6 Years
Technical Skills Electrical Testing No 2 4 - 6 Years
Technical Skills Read Electrical Schematics No 1 4 - 6 Years
 
Job Number: JEG -1968-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Delegated Organization Process Specialist

Description:
We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

Responsibilities of the Delegated Organization Process Specialist
Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
Propose and execute on process improvement opportunities.
Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
Educate impacted parties on system changes and upgrades.
Support changes to JCAB requirements to facilitate all system improvements.


Requirements of the Delegated Organization Process Specialist

10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
Significant experience with process development/improvement
Strong knowledge of global certification requirements and compliance standards.
Experience interfacing with regulators to support certification activities.
Fluent in English, with Japanese language capabilities a bonus.
Previous experience in as an aviation authority employee or delegate is beneficial.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Clearfield, Utah ) S9271212

Description:
Design Engineer ( Clearfield, Utah ) S9271212
12 month Contract

Pay Rate:$70-80/hr W2

Active Secret Clearance Required

Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

Top three skills:
Must have an active clearance with an investigation within the last 4.5 years
BS in Engineering with a minimum of 10 years related experience in design engineering function
Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
 
Job Number: S9271212
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Manufacturing Engineer

Description:
General Summary:
The Manufacturing Engineer position is part of the ME Design Engineering team and is responsible for providing Electrical / Avionics technical support in the areas of manufacturing, design, development, and testing.

Duties and Responsibilities:
1. Take complete ownership of assigned A/C area(s).
2. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
3. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
5. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
6. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
• In lieu of bachelors’ degree, management may elect to consider candidates with a combination of work experience, education, and formal training.
2. 5+ years of directly related work experience within a Manufacturing or Production Engineering design team is required.
3. Previous project engineering and/or project management experience preferred.
4. Six Sigma Certification is a plus.
5. Experience in estimating/ quoting machine/ assembly hours and tooling costs a plus.
6. Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.

Knowledge, Skills and Abilities:
1. Proven knowledge of wiring harness manufacturing.
2. Proven ability to define standard electrical and avionics methods for installation/testing and the prevention of damage.
3. Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
4. Knowledge of AS9102 processes, procedures, and methods a plus.
5. Knowledge of Garmin Avionics Systems a plus.
6. CATIA V5/V6 experience is a plus.
7. Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
8. 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
9. Ability to analyze a variety of engineering data to help determine how to meet company objectives.
 
Job Number: 28-003
Job Location: Greensboro, NC
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1+ year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMC Engineer w/Top Secret Clearance

Description:
*This is a full time, 15 month position, based in Fort Worth*



We are hiring for an aircraft Electro Magnetic Compatibility Systems Engineer who will be creating EMC/EME requirements definition/compliance testing. Candidate will travel to many company sites to define the EMC requirements of the site, analyze and test equipment, systems, and aircraft to assure proper operation within the electromagnetic spectrum. Candidate will create design authority for electrical bonding, wire harness and other shielding, wire routing, and electrical ground system design



Required:
*8 years’ experience as a system or similar engineer in aircraft component EMC compatibility testing.
*Knowledge of MIL-STD 464 and 461
*Experience using tools such as PSpice (ORCAD), MATLAB and EXCEL.
*Active Top Secret Clearance; US Citizens only.
*Able to travel to company sites, 1-2 weeks at a time.
 
Job Number: 106
Job Location: Fort Worth, TX
Rate: market
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.




The Structures Company is an AA/EOE.
 
Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
• Technology focal for motor / motor controllers
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Preparation and presentation of technical data in design reviews
• Review and approval of Qualification Test Plans, Procedures and Reports

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical / Electronic Engineering, Master’s degree preferred
• 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

Knowledge, Skills and Abilities:
• Knowledge of aircraft electrical power systems
• Knowledge of system modeling and analysis tools
• Knowledge of motor / motor controller theory and application
• Knowledge of FAR Part 23 or 25 regulations preferred
• Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
 
Job Number: 28-005
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Magnetic Effects Engineer (EME)

Description:
Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
• Provide aircraft level EME guidance
• Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
• System design and architecture analysis
• Interact directly with suppliers
• Define traceability to the FARs
• Perform and teach electromagnetic compatibility design and analysis
• Perform computational electromagnetics calculations and assessments
• Validate and verify of requirements
• Provide guidance for System test and certification
• Report Status
• Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
• Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the EME discipline.
• EME systems design and integration experience
• Aircraft development experience
• Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
• Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aide - Clearance MD

Description:
166406
Job Title: Engineering Aide

Work Site Address: Patuxent River, MD 20670
Job Number: 2032-1
Max Pay Rate: $25.00/hr
Start Date: 10/1/2019
End Date: 7/6/2020
Position Type: Contract

Job Summary:
Provides technical support to engineers on a variety of technical tasks.

Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes. Inspects aircraft engineering drawings for impact to aircraft mass properties. Performs mathematical calculations using established formulas and prescribed guidelines Uses provided computer asset in performance of analyses and development of documentation/reports. May conduct tests and record data to assist with engineering evaluation or analysis. Develops and refines engineering software tools against provided requirements.

Qualifications and Education Requirements
Basic Qualification: BS in Engineering not required, Associates degree is sufficient. Candidate should have ability to read and interpret engineering drawings, drafting capability not required. Familiar with VBA and C++ programming languages.

Desired Skills: Familiar with CATIA and VAS for engineering drawing inspection. Proficient with VBA and C++ programming languages.

Skills: Category Name Required Importance Experience
Software Skills C++ Yes 1 1 - 2 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 1 - 2 Years
Technical Skills VBA Yes 1 1 - 2 Years

Qty 1 position required
 
Job Number: JE-2032-1S
Job Location: Patuxent River, MD, MD
Rate: 25/hr max
Duration: 9 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F-35 Project Management Support CA

Description:
165930 Job Title: F-35 Project Mgmt Support

Work Site Address: 1 Space Park Blvd, Redondo Beach, CA 90278
Job Number: 1795 (19023764)
Max Pay Rate: 38.00
Start Date: 8/19/2019
End Date: 08/14/2020
Position Type: Contract



Job Description:
Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Assist with development of proposal Basis of Estimate (BOE) artifacts and supporting rationale documentation. Must possess excellent interpersonal, written and oral communication skills. Position requires a resourceful, independent self-starter able to analyze and solve CAM derived objectives involving solicitations of and commitments from various stakeholders.


Qualifications and Education Requirements

•Solid background and understanding of Project Management fundamentals
•Bachelor’s degree
•3 years of relevant experience
•Proficient in applying Cost Account Management/Earned Value principles
•Adept in developing products in MS Word, Excel, Project and Power Point
•Exceptional verbal, written, presentation, and leadership skills
•Bachelor degree from an accredited college

Preferred Skills

•Cost Account Management / Professional Logistics Accreditation(s)
•MS Access proficiency (creating queries, forms, reports and code/VBA)
•Six Sigma Certification / Facilitation experience
•Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
•Familiarity with the F-35 program/platform a plus

Location: Redondo Beach
Schedule: 9/80
Duration of assignment: Up to 1 year
 
Job Number: JK-1795ATO
Job Location: Redondo Beach, CA
Rate: 38/hr max
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue & Damage Tolerance Engineers Needed

Description:
-Fatigue and Damage tolerance experience on primary and secondary airframe metallic structure required. MUST BE US Persons
•Strong background in classical stress analysis.
•Experience with Catia V5 to support stress analysis and drawing release.
•Experience with reviewing 2D drawings.
•Ability to work independently under limited supervision.
•Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
•Experience with Patran/Nastran is a plus.
•Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng exp

The Structures Company LLC is an AA/EOE.
 
Job Location: Savannah, GA
Rate: $75-80/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

Responsibilities of the Flight Control Engineer

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
Author flight test and ground test specifications for Flight Controls Systems.
Analyze test data and evaluate system operation.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Prepare test reports.
Evaluate requirements for traceability, correctness, and completeness.
Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
Initiate and validate improvements to the design and documentation of the Flight Control System
Ensure all schedule and cost objectives are meet as described.


Requirements

Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
7 plus years of experience with flight controls in terms of both software and hardware.
Excellent communication skills both written and verbal.
Expert knowledge of ARP 4754 and DO178C.
DER, UM, DAD Certification active or previous is highly preferred.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer

Description:
Here's the Deal
As the Flight Deck Design Engineer you will report directly to the Flight Deck Manager and will be responsible for the design and integration of the flight deck for a business jet.

On any given day you might:
• Design and develop the Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the Flight Deck mock-up
• Assist in the creation of the Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-030
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer

Description:
• Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements
• Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer - Avionics

Description:
• Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements
• Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention


We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design




The Structures Company is an AA/EOE.
 
Job Number: 330
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Loads Engineer

Description:
Flight Loads Engineer

Location: Philadelphia, PA

Responsible for determination of flight loads and ground loads to ensure the aircraft design is structurally sound. Develop documentation to show compliance with structural design maneuvers.



Job Responsibilities:

• Define and validate aircraft flight and ground loads through simulation and flight test data analysis of AW609 tiltrotor structural design maneuvers. Utilize knowledge of aeromechanics to ensure analysis and results can be used to show compliance with certification rules.


• Modify flight simulation script files to improve efficiency, ensure simulated maneuvers are compliant with regulations, and produce sensitivity studies of various aircraft configurations.


• Deliverables include flight simulation time history data, well commented scripts (python, pearl, bash), recommendation and conclusions of analysis conducted.


• Support activities and requests from the FAA related to flight loads analysis and methodology.


• Provide support analysis for activities lead by Aeromechanics disciplines (Aerodynamics, Handling Qualities, Structural Dynamics, Rotor Dynamics), Flight Controls, and Flight Test teams.


Qualifications:


• Must be a US Person (Citizen or Green card) to operate ITAR controlled flight simulation software


• BS degree in Engineering; MS degree Aeronautical Engineering preferred


• 5+ years’ experience in a technical leadership capacity related to aircraft aeromechanics, aerodynamics, guidance navigation and controls (GNC), experimental flight test, flight loads definition/validation, flight simulation, handling qualities, or flying qualities.


• Experience with scripting languages such as Pearl, Python, Matlab, Octave


• Experience developing structural design criteria and/or performing flight and ground loads testing, simulation, and analysis


• Strong analytical skills. Ability to understand complex systems and aircraft flight characteristics.

• Strong written and verbal communication skills. Ability to communicate at all levels of the organization, identify solutions in the presence of conflict and ambiguity



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57678
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Technical Writer

Description:
Flight Technical Writer (L3) 

Location: Shelton, CT



Summary/Objective



Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring flight manuals (i.e., Operator’s manuals and associated Checklists).  This position is in support of contracted technical manual revision services and the creation of new publications.



Areas of Responsibility/Essential Functions



Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft flight publications.
Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft flight publications
Research, writing, and development of portions of aircraft flight publications according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature. Judgment required compiling and selecting technical data for text and illustrations
Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of  aircraft flight publications
Provide frequent status to supervision
Meet established internal and external delivery milestones
Interface with engineers and pilots over the content and review of the publications when required
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.


Competencies



Technical Skills, Knowledge, and Abilities



Ability to write flight procedures from engineering drawings, specifications, performance data, or other similar literature
Ability to write operator procedures for aircraft with integrated avionics suites (i.e., “glass cockpits”)
Familiarity with the operation of aircraft systems
Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
Ability to read and interpret original equipment manufacturer (OEM) manuals
Ability to read and interpret military and commercial specification and standards
Strong analytical and complex problem solving skills
Ability to self-edit written and graphical work
Proficient with desktop publishing using content management software
Proficient with SGML/XML structured document authoring such as EpicEditor or equivalent
Proficient with various research (i.e., customer-specific) applications for technical issues
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
Preferred, but not required:
Military and/or civilian pilot license
Military and/or civilian flight experience
Experience with rotary wing aircraft
A&P mechanic’s license, or equivalent military experience in aircraft maintenance
Ability to use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software


               Interpersonal and Communication Skills



Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
Ability to work collaboratively with others
Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
Ability to demonstrate initiative and be self-motivated
Organizational skills
Time management skills
Detail orientation
Task and goal-orientation
Quality-driven
Responsive and time-sensitive to customer’s delivery schedule
Strong, customer-focused work ethic and positive attitude
Ability to mentor less experienced and knowledgeable writers on the team


Work Experience



Minimum 2 years technical writing experience



Required Education



Requires advanced knowledge of technical publications writing.  Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor’s degree, or equivalent trade experience


Supervisory Responsibility



This position has no supervisory responsibilities.



Work Authorization/Security Clearance



Work authorization: Must be a U.S. person with the ability to work in the U.S.
Security clearance: Required for some assignments at Top Secret level


Work Environment



This position operates in a professional office environment.
This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.


Travel



Limited travel maybe required to support validations.





Additional Eligibility Qualifications



None



Special Demands



None



Other Duties



Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice due to business needs.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57052
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Project Engineer

Description:
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.

The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.

They will:
• Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
• Support and manipulate Microsoft based tools in support of project schedule and status.
• Communicate with other program integrated product teams.
• Compile and analyze performance reports.

The ideal candidate will have:
• Superior business and data skills,
• Knowledge of IMS based project management and can work in a team environment.
• Understanding of Aerospace, Helicopter and / or development program experience
• Knowledge of mechanical / structural design and test

Looking for someone who can jump in, learn the tools and support this ambitious test program. Someone who has been around development programs, engineering and / or even test. The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
Job Number: 1910107247
Job Location: Stratford, CT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Engineer

Description:
Summary
As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.

On any given day you might:
• Develop the HMI design and architecture of the Flight Deck
• Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
• Develop product plans that include certification plans
• Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the Flight Deck mock-up
• Assist in the creation of the Flight Deck Simulator
• Ensure compliance with regulations and customer requirements interact directly with suppliers
• Define requirements and processes
• Validate and verify of requirements
• System test and certification
• Report Status
• Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• Good understanding of Systems Engineering
• Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
• Demonstrated success developing processes
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-032
Job Location: Reno, NV
Rate: $62.50-$100
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Engineer

Description:
As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.
On any given day you might:


• Develop the HMI design and architecture of the new aircraft Flight Deck
• Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
• Develop product plans that include certification plans
• Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• interact directly with suppliers
• Define requirements and processes
• Validate and verify of requirements
• System test and certification
• Report Status
• Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention


We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• Good understanding of Systems Engineering
• Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
• Demonstrated success developing processes
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.




The Structures Company is an AA/EOE.
 
Job Number: 334
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Duration: 12-18 Months, Could Go Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Systems Engineer

Description:
• Looking for a Hydraulic Systems Engineer.
• Someone with experience laying out the entire Hydraulic system in an aircraft.
• Experience with vendor selection, layout of entire system, requirements management.
• Must have a degree.
• Experience at Bombardier, Embraer, or Gulfstream is ideal

The Structures Company is an AA/EOE.
 
Job Number: 329
Job Location: NC
Rate: $75/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Designer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
• Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
• Develops designs for form/fit/function to meet customer and design criteria.
• Provides designs for the fabrication process including sheet metal, extrusions and inject molding.
• Familiarity with structural analysis methods, load paths, and material properties.
• Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
• Makes recommendations to engineering lead/management.
• Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.

Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
• Masters’ degree in Engineering preferred.
• Minimum of 10 years engineering design experience directly related to mechanical/interior design required.

Knowledge, Skills and Abilities:
• Working knowledge of conceptual design development of aircraft interiors.
• Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
• In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Familiarity with 14CFR Part 23/25.
• Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
• Proficiency in Teamcenter (or equivalent PLM tool).
• Ability to work independently or within a team environment.
• Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
• Ability to work cross functionally with Quality and Production to resolve issues on the production line.
 
Job Number: 28-007
Job Location: Greensboro, NC
Rate: $50 - $60/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Stress Analyst

Description:
The candidate will be performing structural analysis of aircraft interior monuments using FEA and classical hand analysis.

Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following:
- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- Working knowledge of FAR part 25 certification requirements
- A good understanding of a fast-paced completion-style environment
- Working knowledge of FEMAP is required.
- BS required.
 
Job Location: Savannah, GA
Rate: $75/hr
Per Diem: Yes
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interiors Design Engineer

Description:
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-832
Job Location: TX
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Japanese Outsourcing Manager

Description:
We are currently seeking an experienced Project Management professional with ample vendor/supplier knowledge to fill an opening for a company here in Nagoya, Japan. Interested candidates should have 10 to 15 years of experience working with Aircraft or Automotive OEM as well as direct vendor management and project management experience.

Responsibilities of the Japanese Outsourcing Manager

Provide leadership and problem solving to improve Japan based vendors performance and drive sustainable operations and deliver key business metrics for the outsourcing program.
Analyze data to identify solutions to challenges, drive business decisions and communicate them clearly to partners and stakeholders at all levels.
Lead regular business reviews, identify gaps and engage with partners on improvement plans to streamline Japan based Outsourcing operations.
Manage programs for Japan and Group company vendor expansion and drive medium to long term strategies.
Manage vendor capacity through continuous engagement with vendor partners to assess active headcount, recruitment pipelines, and ongoing demand for resources from the lines of business.
Work closely with Outsourcing strategy manager, Contract Administration, Global Outsourcing Manager to develop and implement standard process and procedures to apply to the entire outsourcing activities for the company.
Lead negotiation plan development including mapping out detailed approaches, fallback positions, and acceptable terms and conditions.

Requirements of the Japanese Outsourcing Manager

10 to 15 years of experience working with Aircraft or Automotive OEMs.
Ability to read and speak English and Japanese fluently and possess Japanese and global business culture understanding.
Minimum Bachelor’s degree, plus MBA, PMP or other certifications from accredited institutions preferred.
3 years of experience working with outsourcing matters with a focus on; direct vendor management, setting and driving vendor strategy, process improvement, contracting, commercial negotiations, in-house sourcing in Japan market.
Experience managing global procurement responsibilities, using a strategic sourcing methodology, including: opportunity analysis and identification, supplier selection, risk and compliance evaluation, contract negotiation and financial analysis.
Ability to both develop strategic sourcing plans and dive deep in contract details with a solid understanding of how contracts are structured.
Experience with supplier report cards and supplier management.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

Responsibilities of the Lead Weight Engineer​

Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Checking the status and forecast of aircraft weight and C.G.
Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
Designing weight growth plans.
Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
Preparation of weight and balance manual.
Improvements of weight data gathering and verification process.

Requirements Lead Weight Engineer

15 plus years of aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
MRB Engineer

Location: Milledgeville, GA

12+ month contract

Call Laura Leszek at 765-427-4721 if you are interested after reviewing the details!

Our client has an immediate opening for an Aircraft Structural Liaison Engineer with 15+ years of experience to review and provide dispositions to non-conforming composite and metallic detail part and assembly withholding tags. This role will be responsible for Boeing Commercial structure and/or systems repair creation therefore familiarity with Aerospace Material Review Board processing and Boeing D-13709-4 'Requirements of Obtaining Material Review Board Authority by Boeing Subcontractors' specifications is a must and should be capable of conveying engineering dispositions part/assembly meeting design intent. 

Responsibilities

Provide MRB Engineering Support to Operations to address issues occurring during the fabrication of aircraft and/or aircraft components in support of the Boeing programs.
Liaison Engineering functions to include investigation of mfg. issues, design of repairs, engineering support to manufacturing for dwg/spec interpretation, coordinating efforts across a multiple functional organization, such as Planning, Tooling, Stress, M&P, Materiel, and Manufacturing.
Coordinates with other engineering organizations to ensure that repairs meet customer and contractual requirements. 
Provides technical assistance and direction to team members as required.
Determines and develops own approach to solutions within schedule and cost objectives while working under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources.
Frequent inter-organizational and outside customer contacts.
Represents the organization in providing solutions to difficult technical issues associated with specific projects.
Qualifications

Successful candidates typically possess

BS Engineering (Aerospace, Mechanical, or Civil Engineering) from an accredited program recognized by the Washington Accord
15-20 years experience of Aerospace Engineering
Prior Boeing Commercial MRB Liaison Signature Authority with successful completion of Boeing MRB Structural Repair Analysis Course, or equivalent a plus.
Strong interpersonal skills with ability to interface with customers at all levels 
Exceptional time management and organization skills
Strong analytical skills


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57254
Job Location: Milledgeville, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Design Engineer - Hydraulics/Landing Gear

Description:
The Design Manufacturing Engineer - Landing Gear and Hydraulics is responsible for all manufacturing aspects of the fabrication and installation of the Landing Gear and Hydraulics systems.

Duties and Responsibilities:
1. Manufacturing or directing the manufacturing of detail parts, assemblies, and installations to include.
2. Take complete ownership of assigned A/C area(s).
3. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
5. Review major Engineering and/or router changes with shop floor at the start of the respective Position.
6. Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas
7. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
8. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

Education, Work Experience, Certification and/or Licensure:
1. 5+ years structural/ systems Mfg. Engineering experience with the fabrication, assembly, and installation of hydraulics and landing gear details and assemblies
2. B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required.
3. Six Sigma Certification a plus.
4. Experience in sheet metal fabrication a must to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming.
5. Experience with GD&T a must.
6. Experience in an IPT (Integrated Product Team) format is a plus.
 
Job Number: 28-002
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

Education
• Bachelor’s degree in engineering
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 28-004
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Minimum Equipment List Specialist

Description:
We are seeking a Minimum Equipment List (MEL) Specialist with aircraft maintenance experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with aircraft operations as well as MMEL (Master Minimum Equipment List) development experience.

Responsibilities of the MMEL Specialist

Creation and execution of all MMEL development.
Updating and creating MMEL justification analyses.
Updating and creating Dispatch Deviations Guide maintenance and operational procedures.
Coordinating MMEL and associated manuals’ contents with design and safety engineering and the customers.
Planning, coordinating, observing MMEL validation and verification activities.
Coordinating with aviation authorities (JCAB, FAA, and EASA) for MMEL approval throughout Flight Operation Evaluation Board review.
Development a process of updating MMEL as well as monitoring the airline’s MEL operation, evaluating and updating the MMEL documentation process and authority approval process.
Monitoring and supporting airline’s MEL operation after Entry Into Service.
Updating and obtain authorities approval for future MMEL revisions.


Requirements

4 year engineering degree.
Minimum 5 years of experience in Aircraft Maintenance or Operations.
Minimum 3 years of MMEL development experience, including experience coordinating with airworthiness authorities and airlines regarding MMEL documentation.
Knowledge of CS MMEL and FAA MMEL system (FOEB, Policy Letters, etc.).
Airline support experience regarding MMEL/MEL.
Excellent communication skills in English.
Ability to travel domestically as well as internationally.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation within the last 5 years****

Job Description:
1. Lead of the subsystems IPT for a new vehicle design.
2. Design, analysis, and integration of various subsystem architecture such as; fuel, ECS, actuation systems, and electrical power for a new aircraft design.
2. Interface with other disciplines and stakeholders to determine interfaces and systems requirements.
3. Experience with design, analysis, integration and development of multiple aircraft systems.
4. Individual must be able to oversee multiple systems and their design teams and maintain the overall vehicle systems architectures based on the aircraft mission requirements.
5. Experience with the development of performance specification and statement of work (SOW) for vendor selection process.
6. Interface with various suppliers for selection of candidate subsystem hardware.
7. Integrate candidate subsystem hardware with the aircraft.

Job Qualifications:
1. Level 4: BS+16 YRS or MS+14 YR
2. Experience with the design and integration of subsystems architectures
3. Experience leading subsystems design activities
4. Experience with multiple subsystems architectures
5. Experience generating subsystem layouts and designs.
6. Experience leading small teams.
7. Self motivated and ability to work in a fast paced aircraft design environment.
8. Excellent oral and written communication skills.
 
Job Number: 11677
Job Location: Palmdale, CA
Rate: $105.00 - $116.00/HR
Per Diem: Split Available
Overtime: Available
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
We have an Excellent Contract position for a Mechanical Engineer to join a leading Company located in Broken Arrow, OK.

** Candidate must possess and maintain an active Secret Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Major Responsibilities:
Mechanical design, integration, test and production support of simulation equipment. Responsibilities include the development of 3D models, detailed drawings and interfacing with manufacturing.
Basic Hiring Criteria:
A minimum of a Bachelor of Science in Mechanical Engineering or equivalent experience in an engineering discipline is required.
Desired Qualifications:
Prefer 4+ years of directly related experience.
Experience developing 3D models and detailed drawings.
Ability to develop innovative solutions.
Experience using SolidWorks and AutoCAD.
Finite Element Analysis application experience.
Familiarity with aircraft cockpit systems.
Simulation equipment experience.
 
Job Number: 37757
Job Location: Broken Arrow, OK
Duration: 6 Month +
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Secret Clearance)

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing



Required:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experienc



****Strong SolidWorks experience is required



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-34863
Job Location: Broken Arrow, OK
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
POSITION SUMMARY:
Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

• 5+ years of experience.
• BS degree preferred
• Must have ON THE JOB EXPERIENCE with Solidworks.
• Preferably 5 years of experience from aircraft completions industry
• Must have experience designing waste water systems as that carries the most importance.
• They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
• Must be self-sufficient and NOT require guidance.
• It is preferred if they have experience with collaborating data in Solidworks.
• Experience with report writing


The Structures Company is an AA/EOE.
 
Job Number: 340
Job Location: IN
Rate: $57-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Mechanical Systems Design Engineer

Description:
• Must have experience with 2D and 3d drawings in Catia V5
• Must have experience with either Aircraft Doors Design, Hydraulic Design, Flight Controls, or Pneumatics



The Structures Company is an AA/EOE.
 
Job Number: 338
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



The Structures Company is an AA/EOE.
 
Job Number: 346
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
Summary
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the business jet.

On any given day you might:
• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

We're looking for someone who has:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft
• 2+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing powerplant systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Strong customer focus with experience in a global environment working with customers and suppliers
• Strong/proven problem-solving skills across multi-disciplinary skill sets
• Strategic leader with very strong decision making and communication skills

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-037
Job Location: Reno, NV
Rate: Competetive
Per Diem: YES
Overtime: Possible
Duration: 1+year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Guidance, Navigation and Controls Engineer (10-15+ yrs exp)

Description:
The Core Technology Engineering Group is looking for a Principle Engineer with a background in Navigation and Controls to help in the design, analysis and testing of state-of-the-art airborne remote sensing systems.

These sensor systems utilize highly accurate Navigation & Control systems in order to isolate the line-of-sight (LOS) from aircraft motions, for pointing to imaging targets and obtaining geolocation information. The individual will join an experienced interdisciplinary team of engineers working in a collaborative environment, with the responsibility of developing & implementing guidance and control systems.

The main responsibilities include:
• Derive the Navigation & Control system requirements and functionally architect a system to meet the requirement under size & power constraints.
• Design and implement Navigation & Control algorithms to perform under 6DOF aircraft motion.
• Perform model-based analysis of the various aspects of the system including stability, performance, robustness and mission objective analysis.

Detailed Skill Requirements:
• Demonstrated strong skills in the derivation of Control system requirements
• Demonstrated strong skills in classical or modern controls design
• Demonstrated strong skills in developing algorithms
• Ability to learn on the fly.
• Ability to drive tasks to closure in an environment of changing priorities
• Excellent oral, written and presentation skills

Basic Requirements:
• US Citizenship
• Minimum of a Bachelor's degree in appropriate discipline and 10 years of experience or an advanced degree in the appropriate disciple and 7 years of experience

Preferred Qualifications:
• Advanced knowledge of Modeling and Simulation
• Hands-on experience with design and execution of hardware-in-the-loop testing
• Proficient with MATLAB/Simulink
 
Job Number: 1910107085
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Logistic Engineer 3 CA

Description:
1791 Principal Logistic Engineer 3 (Job Number: 19017930)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Sep 16, 2019

Target End Date: Sep 11, 2020

Work Week: 9/80

Duration: 1 Year

Location: San Diego, CA

Rate: $39 - $41/hr.

This individual will perform duties as a Logistics Support Analysis for multiple programs in the Unmanned Systems portfolio in San Diego, California. The candidate will identify LSA candidates and maintain the LSA database. It is expected that the candidate will have an understanding of MIL-STD-1388/GEIA 007 in order to integrate the LSA products into the various Logistics disciplines and an understanding of the technical principles, theories and concepts of logistics engineering and aircraft design.

Excellent written and oral communication skills will be needed to act in a consultative role to other programs. The ideal candidate will be well versed in integrated databases, spreadsheets, and engineering data capture.


Basic Qualifications:
Bachelor of Science degree plus 5-9 years of relevant experience.

Preferred Qualifications:
Prior military aircraft helicopter maintenance experience is highly desired, unmanned systems experience, experience with CAD programs such as CATIA and with an LSA database tool such as EAGLE/SlICwave or experience using relational databases
 
Job Number: JK-1791ATO
Job Location: San Diego, CA
Rate: 41/hr max
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Technical Editor and Writer - Clearance CA

Description:
Principal Technical Editor and Writer (Job Number: 19028955)
Number of Openings: 1
Location(s): United States-California-San Diego

Shift: 1st Shift

Target Start Date: Nov 4, 2019
Target End Date: Jul 3, 2020
Pay rate: $40.00 - $45.00
Number of openings: 1
Location: Rancho Bernardo
Work schedule: 9/80

The selected candidate will develop and implement software integration plans in a lab environment supporting various space, aircraft, and ground systems.


Essential Functions:

•Write, rewrite, and/or edit documents such as operational procedure manuals and related technical publications
•Communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel
•Act as a resourceful point of contact to Engineering and the Test teams
•Support the development of teams in the investigation of issues
•Develop, implement, and support the Technical Order (TO) development and build plans
•Demonstrate initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals
•Requires active participation in overseeing the preparation of illustrative materials, including the selection of drawings, sketches, diagrams and charts

Candidate must be comfortable in a lab environment and be able to collaborate closely with system engineers, hardware designers, and integration/test engineers.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization.

Preferred Qualifications:

Previous Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: JK-1807ATO
Job Location: San Diego, CA
Rate: 40-45/hr
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Product Engineer

Colorado Springs, CO
$33.38/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Product Engineer - Responsible for mid to high complexity projects with high complexity related to general engineering and technical process improvements.

Additional:
* Provides experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
* Provides experienced engineering support for operations, supply chain, quality, technical publications and program management.
* Provides sustaining engineering support to airlines and other aftermarket customers.
* Provides engineering support for operations, supply chain, quality, technical publications and program management.
* Updates engineering documentation through Engineering change orders and Document Change notices.
* Communicates with internal and external customers on a regular basis.
* Leads teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
* Provides root cause and corrective action investigations.
* Direct interface with external customers on engineering issue resolution and product improvements.
* Supports after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained.
* Supports Material Review Board (MRB) evaluation and disposition.
* Ensures quality product utilizing Company quality procedures.
* Audits work area for safety compliance.
* Adheres to all Company rules and codes of conduct.

-Bachelors degree required
 
Job Number: 11663
Job Location: Colorado Springs, CO
Rate: 33.38
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer (Aircraft)

Description:
The Product Engineer will be responsible for mid to high complexity projects with high complexity-related to general engineering and technical process improvements.

They will:
• Provide experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
• Provide experienced engineering support for operations, supply chain, quality, technical publications and program management.
• Provide sustaining engineering support to airlines and other aftermarket customers.
• Update engineering documentation through Engineering change orders and Document Change notices.
• Communicate with internal and external customers on a regular basis.
• Lead teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
• Provide root cause and corrective action investigations.
• Have direct interface with external customers on engineering issue resolutions and product improvements.
• Support after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained
• Support Material Review Board (MRB) evaluation and disposition.
• Ensure quality products utilizing company quality procedures.
• Audit work areas for safety compliance.
• Adhere to all company rules and codes of conduct.

Education
Bachelor of Science - STEM, Mechanical or Aerospace Engineer, General Engineering, Engineering Physics, or similar.
 
Job Number: 1910107491
Job Location: CO Springs, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
We have a great opportunity for our client's Propulsion group!

Duration – 9-12 months
Exempt position (salary)
Pate Rate: Open

Experience:
Must have system level engineering experience on engine installations.
Turbo Prop install experience is preferable, but not mandatory.
Must have a BS degree (BSAE, BSME).
System testing required for PDR.
Experience with engine installation into aircraft for PDR.
Spec out system parts.
Coordinate/support manufacturing.
Select and manage suppliers.
Some experience with CAD software like Catia V5, UG NX, etc.
Experience doing thermal analysis of engine installations.
US Citizen or permanent resident.
 
Job Location: Manassas, VA
Rate: Open
Per Diem: Split
Duration: 12+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management 1 / F-35 CA

Description:
Project Management 1 (Job Number: 19029677)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Dec 23, 2019

Target End Date: Dec 18, 2020

Pay rate: $30.00 - $35.00

Number of openings: 1
Assignment Duration: Up to 1 year
Location: Redondo Beach, CA
Work schedule: 9/80


Roles and Responsibilities

Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly evaluations, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data; assessing team performance to plan, and defining estimate to complete projections. Scope also includes determining earned value variance causes, explanations and corrective recommendations/actions. Position requires a resourceful, independent self-starter able to analyze and solve CAM-derived objectives involving solicitations of and commitments from various stakeholders.

Basic Qualifications

• Cost Account Management experience
• Adept at developing products in MS Word, Excel and Power Point
• Effective verbal and written skills



Preferred Qualifications

• Bachelor degree from an accredited college
• Understanding of Project Management fundamentals
• Applied Earned Value Management System (EMS) experience
• Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
• Familiarity with the F-35 program/platform a plus

 
Job Number: JK-1805ATO
Job Location: Redondo Beach, CA
Rate: 30-35/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - Aerospace

Description:
We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

Responsibilities of the Project Manager

Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
Preparation of lower level schedules and support for sub-group leads in assignment of resources.
Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
Keep management and relevant members of the team informed on progress of significant activities.
Planning and coordinating integration of design change activities.
Understand all assigned systems contract requirements in support of suppliers.
Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
Manage and monitor overall project budget with support from financial controller.
Identify, manage and follow up project risk, issues and opportunities.
Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

Requirements of the Project Manager

Minimum 10-years of experience in aerospace required.
Strong skills and experience coordinating with other division and leading projects.
Aircraft systems and/or project management experience.
Excellent overall knowledge about aircraft manufacturing and certification program.
Prior experience creating governance structure and KPI.
Have high level communication skills, energetic and driven to complete projects.
Proficiency with MS Project and MS Excel.
PMP certification and cost/budget management is preferred.
Candidates must be fluent in both written and spoken English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
JSG is hiring a RMS (Reliability, Maintainability, Safety)Engineer for a 15+ months contract opportunity in Shelton, CT!

Description:

Interface with Logistics Support Analysts, NAVAIR Supportability and CH-53K Design IPTs & GSE Design Engineering to review LORA defined Intermediate and Depot Maintenance tasks to understand support equipment requirements; acceptance inspection, operational checkout, disassembly, cleaning, inspection, repair/replacement, assembly, and test.

Refer to the Companys Aircraft Maintainability System SAMS Data Base to review Organizational, Intermediate, & Depot Maintenance Task Analysis for the various systems on components on the CH-53K.
Review Supplier SDRLs upon receipt to understand supplier recommendations for Intermediate & Depot maintenance support equipment requirements.
Review existing production tooling for Client manufactured components for application for Intermediate and Depot Level Maintenance tasks.
Working with NAVAIR Lakehurst & NAVAIR Supportability, determine if existing peculiar and common support equipment in NAVAIR/DOD Inventory can support CH-53K Organizational, Intermediate, & Depot Maintenance Tasks.
Prepare tracking files that identify support equipment that is required for each maintenance task for a system or component. The tracking files will track all peculiar & common support equipment identified.
Using the SAMs Data Base, prepare Peculiar Support Equipment CDRLs (SERDS Support Equipment Requirements Data) for Peculiar Support Equipment (PSE) required to support Organizational, Intermediate, & Depot Maintenance Requirements.
Create and manage lists to ensure proposal responses are accurate to approved maintenance plans.

PREFERRED EXPERIENCE:

A Federal Aviation Administration (FAA) Airframe/Powerplant certification is desired.
Demonstrated knowledge on various types of aviation related ground support equipment is desired.
Naval Aviation Maintenance Program (NAMP) experience in a Depot/Overhaul Repair facility.
Strong Microsoft Excel and Word experience.
 
Job Number: 375755
Job Location: Shelton, CT
Per Diem: Possibly
Overtime: Possibly
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
RMS (Reliability, Maintainability, Safety) Engineer

Location: Shelton, CT (06484)

Description:

o Interface with Logistics Support Analysts, NAVAIR Supportability and CH-53K Design IPTs & GSE Design Engineering to review LORA defined Intermediate and Depot Maintenance tasks to understand support equipment requirements; acceptance inspection, operational checkout, disassembly, cleaning, inspection, repair/replacement, assembly, and test.

o Refer to the Sikorsky Aircraft Maintainability System SAMS Data Base to review Organizational, Intermediate, & Depot Maintenance Task Analysis for the various systems on components on the CH-53K.

o Review Supplier SDRLs upon receipt to understand supplier recommendations for Intermediate & Depot maintenance support equipment requirements.

o Review existing production tooling for Client manufactured components for application for Intermediate and Depot Level Maintenance tasks.

o Working with NAVAIR Lakehurst & NAVAIR Supportability, determine if existing peculiar and common support equipment in NAVAIR/DOD Inventory can support CH-53K Organizational, Intermediate, & Depot Maintenance Tasks.

o Prepare tracking files that identify support equipment that is required for each maintenance task for a system or component. The tracking files will track all peculiar & common support equipment identified.

o Using the SAMs Data Base, prepare Peculiar Support Equipment CDRLs (SERDS Support Equipment Requirements Data) for Peculiar Support Equipment (PSE) required to support Organizational, Intermediate, & Depot Maintenance Requirements.

o Create and manage lists to ensure proposal responses are accurate to approved maintenance plans.

o PREFERRED EXPERIENCE:
-A Federal Aviation Administration (FAA) Airframe/Powerplant certification is desired.
-Demonstrated knowledge on various types of aviation related ground support equipment is desired.
-Naval Aviation Maintenance Program (NAMP) experience in a Depot/Overhaul Repair facility.
-Strong Microsoft Excel and Word experience.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57843
Job Location: Shelton, CT
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: RAM_MO
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Engineers

Description:
Details
• Integrate Avionic Systems
• Establish requirements
• Be responsible for system design and architecture
• Interact directly with suppliers
• Provide technical leadership, mentoring and guidance
• Define traceability to the FARs
• Be responsible for validation and verification of requirements
• Be responsible for system test and certification
• Report Status
• Manage and track mass properties of Avionic Systems during the complete design cycle
• Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
We're looking for someone who has:
• Bachelor’s degree in relevant field
• 5+ years of experience within the Avionics discipline
• Experience working on aircraft development programs
• Experience with Avionic Systems design and integration
• Demonstrated success developing processes
• Good understanding of Systems Engineering
• Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
• A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Software Engineer - Clearance FL

Description:
166254/1793
Senior Principal Software Engineer - Contract Labor (Job Number: 19017468)

Number of Openings: 4

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Sep 9, 2019

Target End Date: Sep 4, 2020

Requested Hourly Pay Rate: 72.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

Length of contract is up to 12 months with option to hire.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 9 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 7 years of software engineering experience.
•Experience developing software / writing code in C/C++ or Ada
•Experience with Linux


Preferred Qualifications:

•Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
•Strong Problem Solving Skills
•Experience in Software Test
•Familiarity with Atlassian tool suite and tools like git and Confluence
•Familiarity with Agile software development process
•DOORS experience
•Eclipse or other integrated development environment (IDE)
•Knowledge of Linux systems with basic commands
•Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
•Experience with OpenGL
 
Job Number: JK-1793S
Job Location: Melbourne, FL
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sheet Metal Mechanic / P-3 experience URGENT SC

Description:
165814
Job Title: Sheet Metal Mechanic
Work Site Address: Greenville, SC 29605
Job Number: 1871-1
Max Pay Rate: $29.00/hr
Start Date: 8/12/2019
End Date: 12/9/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.


Qualifications and Education Requirements
P-3 Navy Aircraft Experience a plus (not required)

Category Name Required Importance Experience
Areas of Expertise Sheet Metal Yes 1 2 - 4 Years
Areas of Expertise P-3 No 1 4 - 6 Years

Qty 4 positions needed
 
Job Number: JEG -1871-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sheet Metal Mechanic SC

Description:
166103
Job Title: Sheet Metal Mechanic


Work Site Address: Greenville, SC 29605
Job Number: 1991-1
Max Pay Rate: $29.00/hr Max Bill Rate:
$39.15/hr
Start Date: 9/10/2019
End Date: 3/27/2020
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.


Preferred Skills
Category Name Required Importance Experience
Areas of Expertise Sheet Metal Yes 1 6+ Years


Qty 1 position required
 
Job Number: JEG -1991-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Signal Intelligence Engineer SIGINT

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



We are a defense subcontractor who is working on secret and top secret military aircraft.

The position we have is for a Signals Intelligence (SIGINT) Engineer who will be working on a strategic sensor system (tactical system) and define specifications, conduct design/development, work with production/implementation/integration, while performing testing/qualification/checkout and troubleshooting.



As part of the responsibilities of this position, candidate will be working with sensor suppliers and managing the duties needed for the SIGINT, developing and integrating of the sensor system.




Required:

*Experience in working as a SIGINT Signals System Engineer

*Strong full life cycle experience in SIGINT systems design through manufacturing, implementation and testing/troubleshooting.

*4 Year degree in Electrical Engineering

*Active Top Secret Clearance (last investigation within 5 years)



Pluses:

*Sensors or instrumentation experience
 
Job Number: 429
Job Location: Palmdale, CA
Rate: 429
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Architect

Description:
As a Software Architect on this team you will work with the Vehicle Health Management Solutions Chief Software Architect to create a common technical vision, make high-level design choices and develop software implementation guidelines to ensure that the software developed will meet functional requirements and design constraints. The software we develop will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board (web-based and cloud deployed) functionality to this software. Prior experience in developing software architectures in a complex system is critical to success in this role.
• Experience developing Large scale, complex software systems
• Experience in developing software architectures in a complex system
• Experience developing software in an agile environment
• Experience developing software in C++ and/or Java
• Experience working with embedded, real-time software
• Experience working with web-based applications deployed in the cloud
• Willingness to work with a geographically dispersed team.
 
Job Number: Software_MO
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
166452 Job Title: Software Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2165-1
Max Pay Rate: $103.70/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Looking for world class talent in Software Engineering to be a part of a team that will carry on our 75 year tradition making history in advanced aircraft development.
This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. This position requires an experienced software engineer to be a part of a strong software development team. The team uses a wide application of modern technical principles, theories, and concepts in the software field to develop, integrate, and test open mission systems software products that can be applied to air and ground based systems.

The candidate will be responsible for all phases of developing software. Candidate responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, integration and flight test, and adjudicating change requests as the software is updated, tested, and integrated. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
The successful candidate will lead a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
STEM Degree
The successful candidate will need to pass a security screening before interview.
Demonstrated leadership experience is required. Experience with C/C++ is required. Experience with XML based open standards, modular open mission systems architectures, Common Software Baseline processes, and Agile processes and tools is highly desired. The candidate must have experience with all phases of the Software Engineering Process from requirements generation, through development, integration, and test. In addition, recent work experience with embedded architectures, single board computers, hardware and software in the loop implementation and testing, and F-35 Mission Systems Software is a plus.

Desired Skills
C and Java languages
XML knowledge
Service Oriented Architecture Knowledge
Object Oriented Analysis and Design
Object Oriented Programming
Agile Software Development
Linux and Windows Operating Systems
Message Broker Technology (e.g. Active MQ)
UML tools (e.g. Rational Rose, Rhapsody)
Configuration Management Systems (e.g. Git)
Agile Process Tools (e.g. Version One)
Software Development Tools (e.g. Visual Studio, Eclipse)
Atlassian Tools (e.g. Stash, Jira)
Continuous Integration (e.g. Jenkins, Bamboo)
Requirements generation and system interface development
System test and Integration experience
UCI Knowledge
Modular Open Mission Systems Development
Mission Systems and Battle Management Knowledge

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level No 1 4 - 6 Years


Qty 1 position
 
Job Number: JE-2165-1TS
Job Location: Fort Worth, TX
Rate: 103.70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Engineer

Description:
• Integrate Avionic Systems
• Establish requirements
• Be responsible for system design and architecture
• Interact directly with suppliers
• Provide technical leadership, mentoring and guidance
• Define traceability to the FARs
• Be responsible for validation and verification of requirements
• Be responsible for system test and certification
• Report Status
• Manage and track mass properties of Avionic Systems during the complete design cycle
• Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention



We're looking for someone who has:
• Bachelor’s degree in relevant field
• 5+ years of experience within the Avionics discipline
• Experience working on aircraft development programs
• Experience with Avionic Systems design and integration
• Demonstrated success developing processes
• Good understanding of Systems Engineering
• Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
• A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.

The Structures Company is an AA/EOE.
 
Job Number: 332
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Subsystem Engineer

Description:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification



We're looking for someone who has:
• Bachelor’s Degree in a relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent relevant experience in developing electrical systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Proven problem-solving skills across multi-disciplinary skill sets
• Experience with CATIA V5 and Teamcenter PLM desired



The Structures Company is an AA/EOE.
 
Job Number: 331
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Propulsion Engineer

Description:
As the Senior Propulsion Engineer you'll report to the Director of Propulsion IPT and be responsible for the development, integration, analysis, testing, and certification of the propulsion system on the aircraft.

• Develop propulsion systems using industry standards and best practices based on trade studies, research and analysis.
• Participate in supplier selection and coordination, integration, flight test and certification of propulsion systems.
• Accomplish deliverables associated with the propulsion system for key program milestones, including design reviews, hardware deliveries, testing and certification milestones.
• Coordinate with other engineering, manufacturing, or specialty personnel to resolve problems.


Requirements:
• Minimum of a Bachelor’s Degree in a relevant engineering discipline, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10+ years of hands-on experience in propulsion systems development for Military, Commercial, and/or Business Jet platforms.
• Experience with propulsion system modeling, including thrust and drag bookkeeping.
• Experience with engine/nacelle/airframe integration.
• Proven success managing and resolving technical issues with engine, nacelle, and EBU suppliers.
• Demonstrated skills generating qualification plans and reports.


The Structures Company is an AA/EOE.
 
Job Number: 345
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Technical writing experience in completions publications such as, outfitting wiring diagram manuals, outfitting maintenance manuals and cabin operating manuals.

Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.


Position Purpose:
Directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:

Essential Functions: 1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Location: Savannah, GA
Rate: $34
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Navigation and Controls Engineer (7 - 10+ yrs exp)

Description:
The Core Technology Engineering Group is looking for a Staff Engineer with a background/interest in Navigation and Controls to help in the design, analysis and testing of state of the art airborne remote sensing systems.

These sensor systems utilize highly accurate Navigation & Control systems in order to isolate the line-of-sight (LOS) from aircraft motions, plus for pointing to imaging targets as well as obtaining geolocation information. The individual will join an experienced interdisciplinary team of engineers working in a collaborative environment, with the responsibility of developing & implementing guidance and control systems.

The main responsibilities include:
• Derive the Navigation & Control system requirements and functionally architect a system to meet the requirement under size & power constraints.
• Design and/or implement Navigation & Control algorithms to perform under 6DOF aircraft motion.
• Perform model-based analysis of the various aspects of the system including stability, performance, robustness and mission objective analysis.

Education/Certifications:
• Master's degree in Aerospace, Controls, Electrical or Mechanical Engineering, Physics, or Mathematics with 5+ years Control or Navigation Systems experience
• PhD in Control or Navigation Engineering with 3+ years Control or Navigation Systems experience is highly preferred

Experience/Qualifications:
Basic Requirements:
• US Citizenship
• Minimum of a Bachelor's degree in appropriate disciple and 7 years’ experience or an advanced degree in the appropriate disciple and 5 years’ experience

Required Experience & Qualification
• Navigation solution design and implementation for ISR sensing systems
• Airborne GPS/Antenna Electronics integration
• Inertial instrument expertise

Preferred Experience & Qualification
• Modernized GPS products experience
• Modeling and estimation/Kalman filtering experience
• Sensor fusion and PNT experience
 
Job Number: 1910107091
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Aircraft Interiors

Description:
Candidate will be performing structural analysis of aircraft interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following:
- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast paced completion-style environment
- Working knowledge of FEMAP is required


Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

The Structures Company is AA/EOE.
 
Job Location: Savannah, GA
Rate: up to $72/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior

Description:
Stress Analysis Engineer - Interior Furnishings

- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast-paced completion-style environment
- Working knowledge of FEMAP is required
 
Job Number: 19-14438
Job Location: Southeast
Duration: Year Plus
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Furnishings

Description:
Candidate will be performing structural analysis of interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following: Use of finite element analysis for both primary and secondary structures -Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations. A working knowledge of FAR part 25 certification requirements. A good understanding of a fast paced completion-style environment. Working knowledge of FEMAP is required.
 
Job Number: 19-830
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer / Stress Analyst with Nastran & Abacus

Description:
*This is a 15 month contract position located in Palmdale, CA*

*No relocation is available, must have an active clearance to apply*

*On site position, per diem SPLIT is available for those out of town*


We are seeking a contract flight vehicle (fixed or rotary wing) stress / structural analyst who will be working on aircraft and or missiles applying knowledge to dynamics and stress of flight upon vehicles.


Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:

*Current Active Secret Clearance; Requires applicants to be US Citizens
*8+ years’ experience in stress/structural analysis of aircraft using FEM (Nastran or Abacus).

*Knowledge of SLIM or VISION.
*Good FEA and FEMAP skills.
*4 year engineering degree in ME, aerospace or equivalent
 
Job Number: 472
Job Location: Palmdale, CA
Rate: $85
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. Also your last investigation needs to be within the last 5 years****

Job Descriptions:
1. This position is for an Airframe Dynamics Analysis.
2. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures.
3. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis.
4. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

Job Requirements:
1. Structural dynamics/vibro-acoustics analysis experience on air vehicles is required.
2. Structural analysis hand calculation methods
3. Excellent verbal and written communication skills
4. Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
5. Finite Element Analysis (FEA)
6. ADAMS modeling and simulation
7. MSC NASTRAN/PATRAN
8. Familiarity with CAD modeling

Education:
1. B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
 
Job Number: 11122
Job Location: Palmdale, CA
Rate: $90.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
165274/1675-1
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 3
Desired Start Date: 6/25/2019
End Date: 6/24/2020

Job Description:
This position is for an Airframe Dynamics Analysis Team with Lockheed Martin's Skunk Works® Advanced Development Programs. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

• Structural dynamics/vibro-acoustics analysis experience
• Structural analysis hand calculation methods
• Excellent verbal and written communication skills
• Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
• Finite Element Analysis (FEA)
• ADAMS modeling and simulation
• MSC NASTRAN/PATRAN
• Familiarity with CAD modeling

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $90.00 Hourly
Experience
Technical Skills Vehicle Dynamics Yes 1 6 + Years
Technical Skills Knowledge of Dynamics and Control Areas No 2
 
Job Number: JE-1675-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
General Summary:
Structures Designer Engineering will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve compay objectives including cost, weight, project sustaining, on production, or new product development.
• Familiarity with structural analysis methods, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Working knowledge of composite aircraft construction including primary and secondary structure
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 5 years of experience
• Must possess a minimum of 2000 hours of experience with Catia V5
• Knowledge of Fibersim

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-009
Job Location: Greensboro, NC
Rate: $50-$60/hr
Per Diem: YES
Overtime: YES
Duration: 1+ year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
POSITION SUMMARY:
The structures engineer performs design, documentation, and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Designs mechanics aircraft primary or secondary structures for VIP business aircraft.
2. Designs structural modifications and structural provisions.
3. Designs repairs for aircraft structure that are beyond the scope of repair documentation
4. Supports the integration of structural and systems installation components within the aircraft configuration.
5. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
6. Ensures designs meet customer criteria, quality standards and FAA requirements.
7. Review of service bulletins and airworthiness directives for applicability, and the generation of engineering documentation for the accomplishment of structural inspections and modifications.
8. Adheres to budget and project schedules.
9. Produces accurate designs and uses consultants when necessary.
10. May perform as functional “lead” for group on specific projects.
11. Assists in selection of components and materials to maintain aircraft configuration.
12. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. 2 – 4 years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design. SolidWorks or AutoCAD is preferred.
2. Must have top down modeling experience
3. Aviation background and aircraft interior experience preferred.
4. Must have analysis experience (tolerance or preliminary).
5. Knowledge of mechanical design and documentation standards.
6. Budget and project management experience required.
7. Ability to work independently and cross-functionally.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.



The Structures Company is an AA/EOE.
 
Job Number: 342
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (Secret Clearance)

Description:
Summary: •Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
•Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
•Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.
•Candidate may participate in on-site support at product manufacturing and integration sites.

Basic Qualifications: •5+ years of experience in aircraft mechanical design (will consider years of experience/education in lieu of degree).
•Experience designing composite aircraft structure.
•U.S. Citizenship is required.
•Active Secret Clearance required.
•The ability to obtain and maintain access to Special Programs.
Preferred Qualifications: •Bachelor of Science degree in STEM.
•Proficiency with NX solid modeling software.
•Proficiency with TeamCenter PLM software.
•Proficiency with FiberSim composite definition software.
 
Job Number: 1910104507
Job Location: Melbourne, FLA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designers - No Degree Catia V5

Description:
Leads the development and maintenance of mechanical/structural engineering product definition. Oversees the development and design of layouts and the modification of existing designs to satisfy customer and production requirements.

Catia V5/Aerospace/Aircraft Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-OK-Tech Design
Job Location: Oklahoma City, OK
Rate: 57.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
General Summary:
The MRB Liaison Structures Systems Engineer reviews defects, establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required.

Duties and Responsibilities:
• Reviews, develops, and implements revised/new processes using six sigma/lean principles to be applied to all phases of production, receiving inspection, manufacturing and flight test.
• Reviews proposed repair dispositions and analysis to determine if the proposed repair is acceptable.
• Ensures that the proposed repair is equivalent to the Blueprint design and that it will not affect systems functionality.
• Provides on site technical support; including interpreting Engineering drawings, specifications, test procedures, and other systems related documents.
• Assists in determining if discrepancies are Engineering related or workmanship issues and documents findings.
• Initiates design and process changes to correct design errors, resolve complex, chronic manufacturing problems to improve produce-ability of the aircraft.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science degree in Mechanical Engineering; experience can be used in lieu of degree requirements
• 6+ years experience of MRB type design of aircraft structures

Knowledge, Skills and Abilities:
• Working knowledge Mechanical Systems concepts and Standard Repair Methods (SRM).
• Working knowledge of CATIA V5, AutoCad and XAO preferred.
• Working knowledge of SAP preferred.
• Proficiency in Microsoft Office Suites (Word, Excel, PowerPoint) and Lotus Notes.
• Ability to effectively communicate with all levels throughout an organization.
• Ability to work independently or within a team oriented environment.

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-008
Job Location: Greensboro, NC
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1+ year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer / F-35 Joint Strike Fighter program - Clearance TX

Description:
166094 Job Title: Safety Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 1953-1
Max Pay Rate: $63.99/hr
Start Date: 8/30/2019
End Date: 11/20/2020
Position Type: Contract

Job Summary:
System safety engineer for the F-35 Joint Strike Fighter program.

Job Description:
Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification. Perform contractual efforts for the system safety team to meet deadlines with high technical quality. Coordinate and collaborate with internal safety team, product development teams, and customer entities.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Previous experience as a system safety engineer or
software safety engineer
Good communication skills
F-35 aircraft design knowledge
Pilot certification
Functional Hazard Analysis
Weibull analysis
Statistics
MIL-STD-882
DO-178
DO-254

Qty 1 position needed
 
Job Number: JE-1953-1S
Job Location: Fort Worth, TX
Rate: 63.99/hr max
Duration: 18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor's degree or above in a STEM-related degree.
2. Experience with Systems Engineering processes.
3. Experience working with customers and/or vendors/suppliers.
4. Experience leading a project or team.

Desired Skills:
1. Computer architecture experience on military platforms.
2. Hardware Networking experience.
3. Familiar with industry hardware and software protocols.
4. Program development experience.
5. Working knowledge of Agile methodologies.
6. Operational or developmental aircraft experience.
7. Experience working across multiple sites.
8. Ability to build and maintain relationships, collaborate with others, engage in constructive conflict, and manage interpersonal dynamics.
9. Strong decision making and judgment.
10. Independent and self-motivated.
11. Oral and written communication skills.
12. Basic financial and business acumen.
13. Demonstrated experience and ability to deliver and other functional disciplines/organizations.
14. Ability to travel.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11666
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor's degree or above in a STEM-related degree.
2. Experience with Systems Engineering processes.
3. Experience working with customers and/or vendors/suppliers.
4. Experience leading a project or team.

Desired Skills:
1. Computer architecture experience on military platforms.
2. Hardware Networking experience.
3. Familiar with industry hardware and software protocols.
4. Program development experience.
5. Working knowledge of Agile methodologies.
6. Operational or developmental aircraft experience.
7. Experience working across multiple sites.
8. Ability to build and maintain relationships, collaborate with others, engage in constructive conflict, and manage interpersonal dynamics.
9. Strong decision making and judgment.
10. Independent and self-motivated.
11. Oral and written communication skills.
12. Basic financial and business acumen.
13. Demonstrated experience and ability to deliver and other functional disciplines/organizations.
14. Ability to travel.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11665
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
2. Experience with requirements development, decomposition, or verification.

Desired Skills:
1. Working knowledge of Radio Frequency (RF) principles and techniques.
2. Experience with supply chain management and supplier technical coordination.
3. Project leadership experience.
4. Experience with RF system Design & Development.
5. Experience with RF subsystem Integration & Test.
6. Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
7. Experience with defining system architecture.
8. Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
9. Experience with Cost Account Management (CAM).
10. Strong communication skills.
11. Proficiency with Word, Excel and PowerPoint; experience with MS Project.
12. Master's Degree.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11620
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
2. Experience in systems engineering.
3. Experience with system design.

Desired skills
1. Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
2. Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
3. Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
4. Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
5. Highly motivated, energetic self-starter.
6. Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
7. Experience with Microsoft Office products

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11580
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
2. System test, design, or development experience

Desired skills
1. Strong oral, written, and interpersonal communication skills.
2. Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
3. Able to work overtime and multitask.
4. Familiarity with aircraft vehicle systems or mission system architecture.
5. Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
6. Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11581
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
2. Mission systems, avionics, or system test experience.

Desired skills
1. Strong oral, written, and interpersonal communication skills.
2. Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
3. Able to work overtime and multitask.
4. Familiarity with aircraft vehicle systems or mission system architecture.
5. Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
6. Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11619
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
2. Experience in systems engineering.
3. Experience with system design.

Desired skills:
1. Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
2. Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
3. Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
4. Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
5. Highly motivated, energetic self-starter.
6. Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
7. Experience with Microsoft Office products

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11618
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor’s degree in Aeronautical Engineering, Electrical Engineering, Math, Computer Science, related Engineering degree considered
2. System Level Design Experience
3. Background using ethernet protocols

Desired skills
1. Preference will be given to candidates with experience in one or more of the following skill domains: TACAN, IFF, Link 16 and/or Open Systems Architecture
2. Familiarity with Systems Engineering processes to include requirements development and verification, systems architecture, and conceptual design theories
3. “Internet of Things” applications
4. Working knowledge of aircraft avionics
5. Team Player
6. Good Communication Skills
7. MS Office Suite Proficiency

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11621
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Pilot or Weapons Systems Operator (WSO) with a minimum of 1,000 hours in fighter aircraft (F-16, F-22, or F-35)
2. Deployed within the last 5 years
3. Operational fighter jet experience
4. Leadership/SME experience

Desired skills
1. Solid speaking and writing skills are a must due to frequent and sustained communication with a myriad of contractors and governmental organizations at multiple levels.
2. Instructor Pilot or Instructor WSO
3. Mix of air-to-air and air-to-ground experience
4. Familiarity with operational test (OT), design test (DT), or weapons evaluations
5. Experience/education in Human Systems Integration
6. Human Factors experience
7. USAFWS Fighter WIC Graduate or Navy Top Gun Graduate

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11622
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer (Active Secret Clearance)

Description:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications
Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
Experience in systems engineering.
Experience with system design.


Desired skills
Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
Highly motivated, energetic self-starter.
Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
Experience with Microsoft Office products
 
Job Location: Fort Worth, TX
Rate: 70/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several Systems Engineers to support the electric power systems power conversion and distribution product group. The candidate will define, maintain, document, and test system requirements for the secondary power distribution products.



Responsibilities will include but not be limited to:

Working in a team environment, engaging in full life-cycle development of electric power distribution and conversion systems.

Certifying to aerospace standards such as ARP4754

Develop distribution system architecture that meets or exceeds the product development requirements

Confirm product design performance, capability and reliability in the engineering product test laboratories

Work with internal systems and software teams to analyze and conduct engineering investigations on electronic products

Interact with both internal and external teams to seamlessly integrate distribution product designs into chapter 24 aircraft electrical systems

Coordinate with manufacturing faculties to effectively implement design into production

Collaborate with the product marketing teams locally to develop product requirements and ensure that the product meets their needs when launched

Required Software: MS Office



Required Experience:

10-15 years experience in systems engineering in the aerospace and defense industry
10-15 years experience with aircraft certification requirements related to system safety and reliability (ARP4754, ARP4761 , FAR / JAR) , and aircraft electrical system architecture
Experience with DOORs software
Experience with RTCA, FAA, ARINC, MIL, and ISO specifications
Experience with Electrical sub-systems development (e.g. Chapter 24, aircraft utilities, power distribution units, actuation systems)
Experience with High Voltage Direct Current (HVDC) Systems a plus
Experience with creating estimates and proposals
Required Education:

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 247521
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166451 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2139-1
Max Pay Rate: $70.00/hr
Start Date: 10/11/2019
End Date: 1/11/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
- Pilot or Weapons Systems Operator (WSO) with a minimum of 1,000 hours in fighter aircraft (F-16, F-22, or F-35)
- Deployed within the last 5 years
- Operational fighter jet experience
- Leadership/SME experience
Solid speaking and writing skills are a must due to frequent and sustained communication with a myriad of contractors and governmental organizations at multiple levels.
Instructor Pilot or Instructor WSO
Mix of air-to-air and air-to-ground experience
Familiarity with operational test (OT), design test (DT), or weapons evaluations
Experience/education in Human Systems Integration
Human Factors experience
USAFWS Fighter WIC Graduate or Navy Top Gun Graduate

Qty 1 position
 
Job Number: JE-2139-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166432 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2145-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
Experience in systems engineering.
Experience with system design.

Desired skills
Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
Highly motivated, energetic self-starter.
Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
Experience with Microsoft Office products

Qty 1 position
 
Job Number: JE-2145-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / “Internet of Things” applications System Architecture - Clearance TX

Description:
166449 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2138-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
• Bachelor’s degree in Aeronautical Engineering, Electrical Engineering, Math, Computer Science, related Engineering degree considered
• System Level Design Experience
• Background using ethernet protocols

Desired skills
• Preference will be given to candidates with experience in one or more of the following skill domains: TACAN, IFF, Link 16 and/or Open Systems Architecture
• Familiarity with Systems Engineering processes to include requirements development and verification, systems architecture, and conceptual design theories
• “Internet of Things” applications
• Working knowledge of aircraft avionics
• Team Player
• Good Communication Skills
• MS Office Suite Proficiency

Qty 1 position
 
Job Number: JE-2138-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / F-35 - Clearance TX

Description:
166434 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2144-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
Mission systems, avionics, or system test experience.

Desired skills
Strong oral, written, and interpersonal communication skills.
Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
Able to work overtime and multitask.
Familiarity with aircraft vehicle systems or mission system architecture.
Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills UNIX No 1

Qty 3 positions
 
Job Number: JE-2144-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / F-35 DOORS Rhapsody UML Framemaker - Clearance TX

Description:
166407 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2073-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
Experience in systems engineering.
Experience with system design.

Desired skills
Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
Highly motivated, energetic self-starter.
Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
Experience with Microsoft Office products

Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills DOORS No 1
Software Skills Unified Modeling Language (UML) - Intermediate No 1

Qty 1 position needed
 
Job Number: JE-2073-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / Mission Systems Integration and Test - Clearance TX

Description:
166460 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2079-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Job Description:
Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+0-3 YRS
Active secret required
Basic Qualifications
Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
System test, design, or development experience
Desired skills
Strong oral, written, and interpersonal communication skills.
Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
Able to work overtime and multitask.
Familiarity with aircraft vehicle systems or mission system architecture.
Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills UNIX No 1

Qty 1 position
 
Job Number: JE-2079-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / RF systems integration test radar EW Communications Radio Frequency - Clearance TX

Description:
166448 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2081-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Master's Degree.
Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
Experience with requirements development, decomposition, or verification.
Working knowledge of Radio Frequency (RF) principles and techniques.
Experience with supply chain management and supplier technical coordination.
Project leadership experience.
Experience with RF system Design & Development.
Experience with RF subsystem Integration & Test.
Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
Experience with defining system architecture.
Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
Experience with Cost Account Management (CAM).
Strong communication skills.
Proficiency with Word, Excel and PowerPoint; experience with MS Project.

Qty 1 position
 
Job Number: JE-2081-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years. Interim Secret would be accepted****

Job Description:
1. System safety engineer for the F-35 Joint Strike Fighter program.
2. Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification.
3. Perform contractual efforts for the system safety team to meet deadlines with high technical quality.
4. Coordinate and collaborate with internal safety team, product development teams, and customer entities.

Requirements:
1. Previous experience as a system safety engineer or software safety engineer
2. Good communication skills
3. F-35 aircraft design knowledge
4. Pilot certification
5. Functional Hazard Analysis
6. Weibull analysis
7. Statistics
8. MIL-STD-882
9. DO-178
10. DO-254

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11414
Job Location: Fort Worth, TX
Rate: $65.44/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems/Components Engineer Parts Decomissioning

Description:
*This is a full time, 15 month contract position located in Fort Worth*



We are looking for a Systems Engineer who will be working in decommissioning F-35 aircraft components, termed Diminishing Manufacturing Sources & Material Shortages (DMSMS).



Duties will include last-time purchases, lifetime buys, and Bill of Material (BOM) monitoring. Candidate will be responsible for inventory management, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs). Candidate will be expected to interface with top level management, engineering teams, purchasing, etc.



Required:
*8 years' experience working as an aerospace Systems, Electrical or Components engineer working on DMSMS
*Strong use of the Teamcenter PDM and/or Siemens PLM Software.
*Active Secret Clearance; US Citizens only please
*Knowledge of Mission Systems Integration and total life cycle issues (architecture, requirements, design, analysis, integration, verification, production and sustainment).
*Experience working with Suppliers, conducting Proposal Analysis and Risk and Opportunity Assessments.



Pluses:

*Engineering Degree
 
Job Number: 386
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer CA

Description:
Technical Editor and Writer (Job Number: 19028799)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Nov 4, 2019

Target End Date: Oct 2, 2020

Pay rate: $40.00 - $45.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: Rancho Bernardo
Work schedule: 9/80


As a Technical Editor and Writer, you will be responsible to write, rewrite and/or edit technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications.
You will develop material that communicates clearly and effectively the technical specifications and instructions to a wide range of audiences to include military personnel.

- This position requires the initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals.
- This position will also require the active participation in overseeing the preparation of illustrative materials, to include the selection of drawings, sketches, diagrams and charts.


Basic Qualifications:

- 6 Years with Bachelors; 4 Years with Masters.
- Previous IETM authoring and development experience.
- Possess knowledge of S1000D, SGML or XML authoring software, common source databases, technical publications development processes, and Quality Assurance (QA) methods.


Preferred Qualifications:

Possess a familiarity with aircraft systems and the USAF Technical Order guidelines.
 
Job Number: JK-1808ATO
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Publications Engineer

Description:
Technical Publications Engineer
Location: Chula Vista, CA

Job Summary:  Perform technical writing of aircraft after-market technical documentation.

Qualifications:  Must be able to perform each essential function and have education, skills & experience listed below. 

Recommended Keywords in Resume for Searching :   Technical / Writer / Aircraft OR Aerospace / Arbortext OR Frame Maker

Essential Functions & Responsibilities: 

Create technical content for documents such as SRMs, CMMs, AMMs, EMMs, IPCs, IPLs, Service Bulletins. 
Employ technical writing & publication software to create technical content in Simplified Technical English.
Education:

Absolute MINIMUM of 4 year ABET Bachelor Degree in Aerospace or Mechanical or Civil or Structural Engineering.   
Required Technical Writing Experience:

0-to-10 years of Technical Writing experience in aerospace industry creating content for aerospace technical manuals.  
Highly Preferred but Not Mandatory Experience:

Analytical thinking and problem solving in developing maintenance manuals content.
Knowledge of aerospace Tech Publication standards such as S1000D, ispec & ATA as they relate to maintenance manuals.
Technical Illustrating and the use of sketching tools and or artistic ability to hand sketch is a plus.
Parts list and Parts catalog creation by interrogating engineering data such as assembly drawings & models.
Personal and Interpersonal Skills

Strong interpersonal skills with willingness to ask questions & dig for answers. High degree of collaboration is expected.
Demonstrated ability to multitask with strong task orientation and attention to critical details required.
Ability to work independently, be insightful, resourceful & innovative and willing to do whatever work is assigned.
Great verbal & written communication skills with strong command of English language and Simplified Technical English.
Ability to read & understand 2D drawings, 3D solid models, assemblies and maintenance procedures
Preferred But Not Mandatory Tech Pubs & Software Skills:

Arbortext, Adobe Framemaker & PageMaker, IsoDraw, CORENA, Mark-Up languages: SGML, XML, HTML
MS Word, MS Excel, MS PowerPoint
3DVIA & CATIA (general familiarity) + Familiarity with Team Center + ENOVIA (general familiarity)
Certificates, Licenses, Registrations: None required except diploma or certificate for MIN 2 years technical training.



Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57347
Job Location: Chula Vista, CA
Rate: $35
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
We are seeking a Test Engineer with a Bachelor's degree in a related engineering field and at least 3 years of relevant experience. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and test the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow.

What to look forward to:

As a Test Engineer, you will be using your skills and expertise to design formal tests on our products such as engines, instruments, controls, robots, machines, and more. You'll be responsible for conceptualizing and delivering difficult and complex mechanical and electro-mechanical component and system design tests. Your technical responsibilities during planning, organizing and conducting projects involves the design and development of new testing processes.

Must-haves:
• Bachelor's degree in a related engineering discipline and at least 3 years of relevant experience
• Understanding of testing methodologies
• Experience with various testing equipment and standards
• Ability to read schematics, use service manuals, follow test procedures, and use logical troubleshooting techniques
• Ability to prepare complex test procedures
• The ability to obtain and maintain a Security Clearance
Preferred:
• Experience with on-aircraft testing
• Familiarity with ISR aircraft mission system testing
• Current, active security clearance
 
Job Location: CO
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11430
Job Location: Fort Worth, TX
Rate: $56.05/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11431
Job Location: Marietta, GA
Rate: $53.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.
- Must be US citizen.
- MUST HAVE Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11582
Job Location: Palmdale, CA
Rate: $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance CA

Description:
166408 Job Title: Tool Design

Work Site Address: Palmdale, CA 93599
Job Number: 2012-1
Max Pay Rate: $75.00/hr
Start Date: 9/17/2019
End Date: 9/11/2020
Position Type: Contract

Job Summary:
Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years

Qty 4 positions

Applicants must not have applied for Tool Design at LM- in the last 6-mo.
 
Job Number: JE-2012-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer CATIA, W/Secret Clearance

Description:
*This is a full time, 1 year contract position located in Ft Worth, TX*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment including tools, dies, gauges, jigs, fixtures, and prototype model parts.



Required:

*7+ years’ experience in aircraft tool design/fabrication

*Active Secret Clearance, with reinvestigation within the last 5 years

*Strong experience designing using Catia V, generative shape, parts, assembly and draft of workbenches and fabrication using composite materials, cure, trimming, drilling, forming, welding, inspection and assembly.

*Good GD&T knowledge

*Engineering Degree



Preferred:

*Experience in structural analysis/material selection/sizing.

*Experience in electro-mechanical/pneumatic/hydraulic systems design
 
Job Number: 574
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Installation Technical Designer

Description:
Wire Installation Technical Designer – Peoria, Illinois

Morson International is currently recruiting for a Wire Installation Technical Designer for our client, an acknowledged leader in engineering design services, design-led manufacturing, networks and operations, data transformation, and analytics. Their site in Peoria, Illinois is in need of candidates on a 6 month temp to perm basis to support a large project they are ramping up nationwide.
Job Summary:
We are seeking a highly motivated Wire Installation Technical Designer to perform wire routing and harness integration in an engineering team environment.
Responsibilities:
• Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Prepare documentation and incorporate design changes using design tools.
• Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
• Aircraft walk through, hands on installation and design check.
• Experience with Boeing aircraft is preferred.
• Coordinate activities and products with internal partners and external suppliers.
• Work under general direction.
Requirements:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• 1 or more years of designing or supporting electrical wire harness Installations
• Experience with CATIA V5 or V6.
• Knowledge of Boeing process standards preferred.
• Good communication skills are essential.
• Must have excellent computer skills and a familiarity with Microsoft Office products.
 
Job Location: Peoria, IL
Rate: $40-$50/Hour
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Installation Technical Designer

Description:
Wire Installation Technical Designer – Hartford, Connecticut

Morson International is currently recruiting for a Wire Installation Technical Designer for our client, an acknowledged leader in engineering design services, design-led manufacturing, networks and operations, data transformation, and analytics. Their site in Hartford, Connecticut is in need of candidates on a 6 month temp to perm basis to support a large project they are ramping up nationwide.
Job Summary:
We are seeking a highly motivated Wire Installation Technical Designer to perform wire routing and harness integration in an engineering team environment.
Responsibilities:
• Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Prepare documentation and incorporate design changes using design tools.
• Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
• Aircraft walk through, hands on installation and design check.
• Experience with Boeing aircraft is preferred.
• Coordinate activities and products with internal partners and external suppliers.
• Work under general direction.
Requirements:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• 1 or more years of designing or supporting electrical wire harness Installations
• Experience with CATIA V5 or V6.
• Knowledge of Boeing process standards preferred.
• Good communication skills are essential.
• Must have excellent computer skills and a familiarity with Microsoft Office products.
 
Job Location: Hartford, CT
Rate: $45-55
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

Back to Advanced Job Search