Job Search Results

507 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/02/20 Thursday 02:38AM Pacific Time by ContractJobHunter. )

Listings 1 - 507

Go To My Job Tracker

Expand all descriptions

2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2592 - PROJECT MANAGER - cv, work doc only

Description:
Evaluate and propose state-of-the-art technology acquisition opportunities for the machining, sheet metal, composite and assembly sectors, enabling the organization to achieve technological excellence.

Evaluate, participate and manage continuous improvement initiatives required to manufacture air crafts.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, acquisition, implementation and commissioning.

Manage budget, schedule and resources in every project phase. Prepare and present progress status at different management levels.

Align resources involved in project and be the interface between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

Minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Have strengths in human resource management as part of matrix project management.

Have a PMI certification (asset).

Have good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2592
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/14/2020
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A&P Helicopter Mechanic

Description:
Chipton-Ross is seeking 6 A&P Helicopter Mechanics for openings in Eglin AFB, FL.

RESPONSIBILITIES:
The A&P Helicopter Mechanic will function as a hangar/line maintenance mechanic and be responsible for performing helicopter inspection maintenance in accordance with operating manuals, polices, and procedures. The desired candidate will be experienced enough to work not only alone in a productive, self-driven way, but also act as part of a team with one or two other team members to help each other develop and perfect their maintenance servicing skills. The needed General Mechanics will have the necessary knowledge and experience to perform aircraft daily, hourly, periodical hangar / line scheduled aircraft maintenance / inspections along with the aptitude and expertise to perform, troubleshoot and repair unscheduled aircraft maintenance issues as needed / directed. They will configure aerospace vehicles and bench test equipment. Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Selected candidates will perform validation/verification testing of systems and components. Document procedures and establish processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspect components and verify repairs for flight worthiness requirements. Oversee training and work under general direction. The desired candidate will also be experienced at towing, securing, performing operational, pre- / thru- / post- flight checks as well as fueling/defueling aircraft. Each candidate should be able to:
Communicate with on-site manager, A&P IA supervisors, and co-workers in a timely, effective way
Work on own as well function as part of a team
Assure inspections, maintenance and repairs are done in accordance with procedures described in the companys FAA Repair Station Manuals as well as with FAA Regulations and manufacturer instructions
Understand and work within restrictions of Air Force AFI 21-101 and DCMA 8210.1C
Use sound judgment and technical aptitude to make good decisions regarding job sequence and techniques, troubleshooting and discrepancy resolution to maximize safety, quality and efficiency and adhere to agreed-upon deadlines
Operate with the highest level of ethics, integrity, safety, quality and honesty
Lift equipment and materials weighing up to 35 pounds.
Climb ladders, work from heights, apply finger and hand dexterity in using hand tools, be able to move around the shop/hangar area and within aircraft continuously throughout the workday
Have computer usage expertise, including MSFT Office, for digital inventory, tool checkout, inspection / maintenance data entry, etc.

REQUIRED EXPERIENCE:
Current FAA Airframe and Powerplant (A&P) Certification is REQUIRED
4+ years of helicopter / rotor wing maintenance experience inspecting, overhauling, and maintaining turbine engine helicopters required
Be flexible, dependable, and work assigned shifts
Be the upmost Safety, Quality, Tool and FOD control conscious

PREFERRED EXPERIENCE:
2+ years recent experience on AW-139 preferred
AW-139 Experience preferred.
Experience as an FAA Part 145 Repair Station A&P mechanic is desired.

EDUCATION:
Accredited High School Diploma or GED required; Two-year degree in aviation discipline desired.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

ADDITIONAL REQUIREMENTS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182455
Job Location: Eglin AFB, FL
Rate: $DOE
Duration: 6 Months
Input Date: 12/02/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

APG Mechanic

Description:
Chipton-Ross is seeking an APG Mechanic for an opportunity in Greenville, SC

RESPONSIBILITIES:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

DESIRED EXPERIENCE:
C-130H 4-6 years

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 182559
Job Location: Greenville, SC
Rate: $DOE
Duration: 9 months
Input Date: 10/23/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 12/30/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 10/24/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB F-16 - no clearance SC

Description:
167210 Job Title: Aeronautical Engineer

Work Site Address: Greenville, SC 29605
Job Number: 2918-1
Max Pay Rate: $44.00/hr
Start Date: 1/27/2020
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Looking for engineer to be part of the new Production of the F-16 and other project opportunities.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.
Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Primary duties of this job will support the Planning tasks as the production planning is created, support the on-site MRB engineers to include anomaly investigation, technical solution development and coordination with the MRB engineer for preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Additionally, this position requires skills as an Airframe Design Engineer to use their technical expertise to design aircraft structure and subsystems installations. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structure design. The candidate will be responsible for layout and detail modeling of aircraft structure, structural assemblies, layouts and detail drawings using CATIA V5 and CADDAM, participating in trade studies, creating and maintaining interface control drawings, and coordination with Integrated Product Teams.

The engineering candidate will be required to coordinate across many functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action.

Qualifications and Education Requirements
Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.
Candidate must value and support diversity.
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Skills: Category Name Required Importance Experience
Areas of Expertise CATIA No 4
Areas of Expertise F-16 No 2
Technical Skills Ability to Read Engineering Drawings Yes 1
Technical Skills Engineering Design Principles Yes 3
Technical Skills Configuration Management No 5

Qty 2 position
 
Job Number: JEG-2918-1
Job Location: Greenville, SC
Rate: 44/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 01/10/2020
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Design Support Engineers

Description:
Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
 
Job Number: 1231
Job Location: Baltimore, MD
Rate: $60-$75 DOE
Per Diem: yes-split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 02/07/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Greg Ambrose
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

Aircraft Mechanic

Description:
Chipton-Ross is seeking a Product Repair/Mod Tech C for an opening in New Orleans, LA.

RESPONSIBILITIES:
This position is for an F-15 electrical and avionics subject matter expert. Applies advanced technical knowledge of F-15 systems to solve unusually complex problems that typically cannot be solved solely by referencing schematics, engineering data or similar documents. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Accredited high school diploma or GED and minimum 5 years experience (equivalent combination of required education and electrical experience in a modification environment).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 4:30 PM

TRAVEL: YES
<10% ADDITIONAL REQUIREMENTS: This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates. MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182869
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 11/06/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Michael Olivarez
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: molivarez@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED.

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 183682
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 12/18/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/30/2019
Last Updated: 02/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis Engineer (Level 2, 3, 4)

Description:
Future Vertical Lift Program

Our client is seeking an Airframe Structural Analysis engineer to join the company’s Future Vertical Lift programs working
new product development in an innovative and dynamic design environment. The Airframe Structural Analysis Engineer
is responsible for analyzing airframe structures for stress and strength requirements, material selection, stiffness
requirements, weight optimization, and performance for the company's Military and Commercial Programs. 


Position Responsibilities:
- Apply basic engineering principles/concepts to complete tasks under the supervision of the technical lead engineer
- With technical oversight, applies scientific analysis and mathematical models to predict and measure the outcome and
consequence of design, in terms of stress, strength, life, stiffness, and weight
- Demonstrate critical thinking & creative 'out of the box' thinking
- Communicate to team members effectively
- Demonstrate basic knowledge of aircraft structure, Bell design and production processes, and structural analysis tools
- Develop solutions to routine technical problems of limited scope

Education Requirements:
- Bachelor's Degree in Mechanical or Aerospace Engineering or equivalent is required
- Master’s Degree is preferred

Position Requirements:
- Experience at all levels will be considered with a minimum of 2 years related experience.
- PC proficiency in NASTRAN / PATRAN, Microsoft Word, Excel, PowerPoint, and Outlook is preferred
- Previous structural stress and fatigue analysis experience preferred
- Must have the ability to work effectively within a team
- Must have the ability to prioritize a variety of assignments
- Good interpersonal and organizational skills are required

Please send resumes to Becky at bnorman@butler.com. Phone number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58547
Job Location: Fort Worth, TX
Rate: Market
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: February 2020
Input Date: 01/07/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Airworthiness Inspector

Description:
PDS is seeking an Airworthiness Inspector for an open position in Savannah, GA.

The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1.  Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2.  Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4.  Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7.  Ensures aircraft/components are airworthy prior to any flight activities.
  8.  Mentors technicians on effective documentation. 


Additional Functions:

  • Communicates with management as required to identify work assignments and delivery schedules
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required
  • Performs other duties as required


 


 

 

Education and Experience Requirements:



  • High School graduate/GED.
  • Airframe and Powerplant License required.
  • Four (4) years aircraft experience on large/mid-size aircraft.
  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Other Requirements:

  •  Strong written and verbal communication skills
  •  Must be able to prioritize tasks
  •  Strong computer skills.
  • Must be able to work all shifts
  •  Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.


 



 


 
Job Number: 1910109755
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/09/2020
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fZOVQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166612 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2358-1
Max Pay Rate: $21.00/hr
Start Date: 10/26/2019
End Date: 10/26/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.


Skills: Category Name Required Importance Experience
Technical Skills Ability to work in a production environment Yes 4 1 - 2 Years
Technical Skills Assembly Process Yes 5 1 - 2 Years
Technical Skills Basic Computer Skills Yes 6 1 - 2 Years
Technical Skills IPC-A-610 Yes 3 1 - 2 Years
Technical Skills IPC-J-STD Yes 2 1 - 2 Years
Technical Skills Soldering Yes 1 1 - 2 Years


Qty 3 positions
A BS Degree is NOT required for these positions.
 
Job Number: LMRMS-2358-1
Job Location: Marion, MA
Rate: 21/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166646 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2461-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position does not require a BS Degree.
Prefer candidates with J Standard as well as IPCA 6-10 and 6-20.

Qty 1 position
Hiring Manager would prefer to see candidates with J Standard as well as IPCA 6-10 and 6-20.
 
Job Number: LMRMS-2461-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance VA

Description:
167392 Job Title: Assembler

Work Site Address: Manassas, VA 20110
Job Number: 3021-1
Max Pay Rate: $25.00/hr
Start Date: 2/9/2020
End Date: 2/28/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
The candidate will support Prep for Ship activities in the Paint/Prep area for all Manassas programs.
Activities will include paint / touch-up of units, preparing unit deliverables for presentation / sell-off to customer, and the coordination and presentation of units for final sell-off to various Navy customers.
This position may have some very light assembly work.

Qualifications and Education Requirements
This position does NOT require a BS degree. HS diploma is required.
1-3 years of manufacturing experience.

Qty 1 position
Hourly Pay Rate Range is $18-$25 based on candidates experience.
 
Job Number: LMRMS-3021-1
Job Location: Manassas, VA
Rate: 18-25/hr max
Duration: 12 months
Input Date: 01/17/2020
Last Updated: 02/04/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / cable harness, soldering required - no clearance FL

Description:
167182
Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2902-1
Max Pay Rate: $22.00/hr
Start Date: 1/6/2020
End Date: 12/18/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Mandatory Must be able to Solder
• Must have good manual dexterity
• Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
• experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Use of manual and automatic wire strippers.
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions.

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years
Technical Skills Cable Harness Yes 5 2 - 4 Years

Qty 3 positions
 
Job Number: LMRMS-2902-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 12/20/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering / assembly experience - no clearance URGENT MA

Description:
167109 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2561-1
Max Pay Rate: $15.00/hr
Desired Start Date: 12/30/2019
End Date: 12/28/2020

Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position DOES NOT require a BS

Skills: Category Name Required Importance Experience
Technical Skills Assembly Process No 1 < 1 Year Technical Skills Soldering No 1 < 1 Year Qty 9 positions
 
Job Number: LMRMS-2561-1
Job Location: Marion, MA
Rate: 15/hr max
Duration: 12 months
Input Date: 12/09/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering experience required - 2nd Shift - no clearance URGENT MA

Description:
166645 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2458-1
Max Pay Rate: $20.00/hr
Start Date: 11/4/2019
End Date: 11/2/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This is an Entry Level position.
This position does not require a BS Degree.

Skills: Category Name Required Importance Experience
Technical Skills Soldering No 1 < 1 Year Qty 1 position 2nd shift
 
Job Number: LMRMS-2458-1
Job Location: Marion, MA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 02/14/2020
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Assembler A

Description:
Chipton-Ross is seeking 4 Assembler A's for openings in Smithfield, PA.

RESPONSIBILITIES:
Performs production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

EDUCATION:
Education/experience typically acquired through basic education (e.g. high school diploma/GED).

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 AM


 
Job Number: 182843
Job Location: Smithfield, PA
Rate: $DOE
Duration: 12 Months
Input Date: 11/06/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Assembler B

Description:
Chipton-Ross is seeking a Assembler B for an opening in El Segundo, CA.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Assembles, inspects, modifies and reworks developmental electronic subsystems, subunits, assemblies, components and harnesses and cables, used for experimental and preproduction purposes. Under engineering direction sets up and operates all types of equipment to fabricate and assemble complete flight, developmental and prototype microelectronic circuit assemblies. May set up and operate small bench microweld machines in laboratory areas. Typical Duties and Responsibilities:
Works from blueprints, schematics, samples lacking complete details or specific information, assembly drawings, sketches, oral and written instructions requiring the identification of all circuit symbols, wiring codes and electrical components.
Determines work sequence, positions, assembles and modifies developmental electronic devices such as radar synchronizers, computers and roll servo units in accordance with schematics, wiring diagrams or other specifications, using pre-drilled chassis and printed wiring boards. Routes and connects wires and cables in the proper manner so that parts, wires or cables are reasonably accessible for removal and replacement and are mechanically connected, soldered or welded according to prescribed standards. Fabricates and routes wire harnesses and cables on panels, modules and chassis. Uses appropriate technology to assure components assembled will not shift position. Fabricates thin or thick film substrates using all appropriate processes. Fabricates and assemble microminiature circuit parts using special resins, thermo compression die bonding, ultrasonic and parallel gap microwelding and microsoldering techniques.
Identifies and selects, as called out on schematic wiring diagrams, various electrical components of proper value or size by color code, coded label or other related identification characteristics. Identifies terminal connections for components as required.
Installs parts and components for proper rotation and polarity. Checks for proper continuity, workmanship and make capacitance and resistance measurements.
Assists in the development of revised or new methods, techniques and procedures. Makes oral and written reports as required.
Works efficiently and completes all task with little or no supervision, performs soldering on all type of standard and fine pitch components. Perform soldering on complex wire connectors with little or no supervision, Applies bonding staking and coating. Assists engineering in improving methods, processes and procedures.
Ascertains that all welds are satisfactory or removes components and rewelds.
Cleans equipment as required.
Meets necessary certifications as required.
Performs rework of the same nature and level of difficulty as described.
Performs incidental related duties as assigned or required.

ADDITIONAL EXPERIENCE:
IPC J-STD-001 Training and Certification preferred but not required.

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate)

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 2:30 AM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 183757
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 12/20/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician

Description:
Avionic Technician

Job ID # 2019-10491

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

 

What You’ll Do:

Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
Work from schematics, engineering drawings and written or verbal instructions.
Operate related equipment; conducts tests and reports data in prescribed format.
Perform calibration and alignment checks.
Make adjustments, modifications, and replacements as directed.
Prepare prescribed compounds and solutions.
 

What You’ll Need:

Modification experience strongly desired.
Must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
Areas if Expertise: C-130.
This position supports a 9/80A-1st shift work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2020-10491
Job Location: Greenville, SC
Input Date: 01/07/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Avionic Technician

Description:
Chipton-Ross is seeking an Avionic Technician for an opportunity in Greenville, SC

RESPONSIBILITIES:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

DESIRED EXPERIENCE:
Aircraft Modification 2-4 years and C-130H 2-4 years

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 182557
Job Location: Greenville, SC
Rate: $DOE
Duration: 9 months
Input Date: 10/23/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 01/13/2020
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 02/10/2020
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 desired - no clearance SC

Description:
165856/1895-1
Avionic Technician
Greenville, SC 29605
29/hr max

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

Areas of Expertise C-130 No 1 4 - 6 Years

Qty 5 positions needed
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG-1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/01/2019
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Build Reliability Engineer

Description:
Chipton-Ross is seeking a Build Reliability Engineer for an opening in Hawthorne, CA with SpaceX to work on an exciting, new program.

DIRECT

POSITION OVERVIEW:
The Build Reliability organization at SpaceX is an inter-disciplinary team that ensures the reliability of flight components and production assemblies. Your breadth of exposure as a Build Reliability Engineer will be immense as you partner with every other core group at SpaceX, guiding the hardware from cradle to grave. You use data-driven decision making to actively represent quality objectives in design and development teams and to drive improvements in reliability on the manufacturing floor. You have the ability to dive deep on the details to identify and solve difficult technical problems, but you can also utilize a system level approach to prioritize issues for the vehicle as a whole. You thrive in a hands-on environment and will spend time in the office, on the factory floor, and in the lab to execute on the mission to bring the capability of flying astronauts back to the United States.

RESPONSIBILITIES:
Partner with Vehicle Engineering and Production teams during all development phases to analyze and create reliability plans for vehicle programs including identification of key characteristics, prototype testing for manufacturability, first article and detailed inspection planning, evaluation of previous non-conformance and lessons learned, and other manufacturing and quality tools as required
Lead the development of test plans and processes and partner with inspectors to ensure quality goals are met in a timely manner
Lead first build reviews to ensure transparency of design intent, design requirements, design and manufacturing risks, and manufacturability of design
Lead, facilitate, and participate in root cause investigations in their respective work centers
Lead containment of all suspect product including but not limited to providing guidance to quality inspectors, technicians, and shop supervisors to assist in quarantining of all suspect product
Design and develop inspection plans as required for process or design changes, ensure inspection/test criteria are objective with clear pass/fail criteria, and assess new processes for safety and product risks

REQUIRED EXPERIENCE:
2+ years of experience in a quality, manufacturing, or design engineering role (student project team or internship experience is also applicable)
Ability to work extended hours, weekends, and offsite as needed. Some travel may be required.

PREFERRED EXPERIENCE:
Experience supporting production of complex electro-mechanical, mechanical, or composites systems in high volume work centers and/or during production ramp-up
Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches
Dedicated to adopting a Lean approach to quality without compromising safety or reliability

EDUCATION:
Accredited Bachelor's degree in aerospace engineering, manufacturing engineering, materials engineering, mechanical engineering, electrical engineering, or engineering physics

WORK HOURS:
Ability to work extended hours, weekends, and offsite as needed.
Full-Time

 
Job Number: 183181
Job Location: Hawthorne, CA
Rate: $DOE
Duration: Direct
Input Date: 11/20/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V Design Engineer

Description:
*This is a 1 year contract position, on site only position, located in Orlando*



We are seeking a Mechanical Designer who has experience in mechanical design with a background in military applications (including including Safety of Flight /SOF) and standards.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.



Required:

*10 years’ experience in designing using Catia V

*Experience with ASME Y14.5M-1994; GD&T (Dimensioning & Tolerancing)

*Active Secret or Interim to start; US Citizens Only Please

*Intralink PDM experience

*Engineering degree



Pluses:

*Knowledge ASME Y14.24M engineering drawings and general drafting practices of IAW ASME Y14.100.

*Familiar with MIL-T-3100 and MIL-STD 100
 
Job Number: 056
Job Location: Orlando, FL
Rate: $65.00
Per Diem: yes split
Input Date: 12/26/2019
Last Updated: 01/17/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Engineering (Structural/Mechanical)

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• This position is in the Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad.
• Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations.
• The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft.
• Designers will create data consistent with industry accepted drafting practices and company standards.
• Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
• Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
 
Job Number: 24-380
Job Location: Appleton, WI
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 01/08/2020
Last Updated: 02/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Processing Engineer

Description:
Data Processing Engineer

Palmdale, CA
$90/hr
15 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
This company is looking for someone to join the historic Skunk Works™ as a flight test data processing engineer. The candidate will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale.

The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
* Receive, process and troubleshoot IRIG 106 formatted data products per established processes
* Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
* Diagnosis and resolution of problems encountered in the recovery of test data
* Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

The applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires an active Secret security clearance.

Must be a US Citizen. This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.

Desired skills
The ideal candidate possesses:
* Experience with IT infrastructure operations, computer networking, and/or software programming concepts
* Experience in data processing and network system administration
* Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
* Programming in C/C++
* Security+ certification
* Subject Matter Expert in data collection systems
* Experience working with the LM application Common Data Processing
* Experience with installation of Network Server systems for data processing
* Experience working in flight test
* Hardware and/or software programming experience
* Understanding of IRIG 106
* Experience with various instrumentation vendors hardware and software
* Symvionics IADS (Interactive Analysis and Display System) use and programming
* Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
* Demonstrated ability to develop and implement process improvement initiatives
* Excellent communication skills
* Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)
 
Job Number: 11924
Job Location: Palmdale, CA
Rate: 90.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Design /Mechanical Engineer-Completions Aircraft Interiors

Description:
PDS Tech is seeking an Design / Mechanical Engineer - Completions Aircraft Interiors Contractor for an open position in Savannah, GA.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of aircraft products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Unique Skills:
  •  Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
  • **Knowledge with placard creation/installation and/or seat engineering/installation highly preferred**
  • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
  • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
  • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
  • Design Engineer will be required to liaison with the shop on engineering issues.
  • Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Other Requirements: 

  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline



 
Job Number: 1910109954
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/16/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fa5BQAQ&URLSource=cjhunter

Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11964
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/13/2019
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 11965
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/13/2019
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer 3

Location: Tukwila, WA
Duration: 6 Months

Job Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Support the development, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- 5 or more years of designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced education (e.g. Associate) and typically 5 or more years' related work experience or an equivalent combination of education and experience

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code:
65L-Wiring Installation Design
 
Job Number: 20-00039
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 1/31/2020
Input Date: 01/09/2020
Last Updated: 01/24/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

EE Technical Designer 3

Description:
**Active Secret Clearance Preferred. US Citizenship Required**

Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Company Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Company, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.
Position Responsibilities:
• Support the development, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Using design tools prepares documentation and incorporates design changes.
• Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Supports engineering system design and functionality validation activities.
• Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
• Coordinates activities and products with internal partners and external suppliers.
• Works under general direction.
Basic Qualifications (Required Skills and Experience):
• 5 or more years of designing or supporting electrical wire harness Installations
• Education/experience typically acquired through advanced education (e.g. Associate) and typically 5 or more years' related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
• Active security clearance is preferred
• Company Defense Experience preferred but not required
 
Job Number: 374353
Job Location: Tukwila, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/02/2020
Last Updated: 02/19/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Capitol Logic & Harness XC

Description:
Unique Skills:
1. Mentor Graphics Capitol Logic and Harness XC experience required.
2. Catia V5 experience preferred.
3. 14 CFR 25 Subpart H - EWIS based design experience required.
4. Completions electrical system design experience preferred.
5. Part 25 Certification experience for cabin interiors preferred.
6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
7. Experience with power distribution, lighting, switching, and harness routing required.
8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
9. Familiarity with aircraft STC procedures preferred.
10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11995
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/19/2019
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Capitol Logic & Harness XC Engineer

Description:
PDS is seeking an Electrical Capitol Logic & Harness XC Engineer for an open position in Savannah, GA.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 


Education and Experience Requirements:




Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:

1) Mentor Graphics Capitol Logic and Harness XC experience required 2) Catia V5 experience preferred. 3) 14 CFR 25 Subpart H - EWIS based design experience required. 4) Completions electrical system design experience preferred. 5) Part 25 Certification experience for cabin interiors preferred. 6) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 7) Experience with power distribution, lighting, switching, and harness routing required. 8) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 9) Familiarity with aircraft STC procedures preferred. 10) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required. 11) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly


Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


 
Job Number: 1910110173
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/18/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbGTQAY&URLSource=cjhunter

Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/04/2020
Last Updated: 02/19/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
City, State: ENG - Peoria
Email: awdonofrio@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=297991&job_number=297991

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 20- 148741
Job Location: Savannah, GA
Per Diem: Split
Overtime: Possible
Start Date: ASAP
Input Date: 01/06/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12016
Job Location: Savannah, GA
Rate: $59.52 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12014
Job Location: Savannah, GA
Rate: $53.17 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 20- 148741
Job Location: Savannah, GA
Per Diem: Split
Overtime: Possible
Start Date: ASAP
Input Date: 01/06/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Location: GA
Input Date: 01/06/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

Electrical Engineer

Description:
PDS Tech is seeking an Electrical Engineer, in Florence, SC.

Summary:

  • Responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
  • Utilize knowledge of power components, distribution and protection, and controls theory and application.
  • Provide product support for a variety of electronic elevator components and electrical systems.
  • Must possess at least a bachelor's or its equivalent in Electrical Engineering and at least five years of work experience in an Electrical Engineering field. In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three years of work experience in an Electrical Engineering field would be acceptable.
  • Must also possess the following: working knowledge of power distribution, protection and control systems; experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application; electrical engineering background with wiring diagrams, system analysis, motor and control applications; experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3; experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and experience with test and measurement equipment. Any suitable combination of education/training and/or experience would be acceptable.


 
Job Number: 1910097443
Job Location: Florence, SC
Duration: 12 months
Input Date: 12/10/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jennifer Morgan
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8aGQAQ&URLSource=cjhunter

Electrical Engineer

Description:
Chipton-Ross is seeking an Electrical Engineer for an opportunity in Palmdale, CA.

RESPONSIBILITIES:
The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Desired skills
The ideal candidate possesses:
Experience with IT infrastructure operations, computer networking, and/or software programming concepts
Experience in data processing and network system administration
Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
Programming in C/C++
Security+ certification
Subject Matter Expert in data collection systems
Experience working with the LM application Common Data Processing
Experience with installation of Network Server systems for data processing
Experience working in flight test
Hardware and/or software programming experience
Understanding of IRIG 106
Experience with various instrumentation vendors hardware and software
Symvionics IADS (Interactive Analysis and Display System) use and programming
Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
Demonstrated ability to develop and implement process improvement initiatives
Excellent communication skills

EDUCATION:
Accredited Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 183410
Job Location: Palmdale, CA
Rate: $DOE
Duration: 15 months
Input Date: 12/05/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-376
Job Location: Savannah, GA
Rate: $55-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-377
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Engineer - Completions - 374361

Description:
**Shift is 4x10**

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
Unique Skills:
Required Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374361
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 02/19/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Engineer - Completions - 374363

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Required Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374363
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 02/19/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/19/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Harness Design - Completions

Description:
1) Electrical Harness Installation (EHI) design experience required.
2) Catia V5 experience required.
3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4) 14 CFR 25 Subpart H - EWIS based design experience required.
5) Completions electrical system design experience preferred.
6) Part 25 Certification experience for cabin interiors preferred.
7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8) Experience with power distribution, lighting, switching, and harness routing required.
9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10) Familiarity with aircraft STC procedures preferred.
11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


Education and Experience Requirements:

1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-369
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Harness Installation Design Engineer

Description:
Unique Skills:
1. Electrical Harness Installation (EHI) design experience required.
2. Catia V5 experience required.
3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4. 14 CFR 25 Subpart H - EWIS based design experience required.
5. Completions electrical system design experience preferred.
6. Part 25 Certification experience for cabin interiors preferred.
7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8. Experience with power distribution, lighting, switching, and harness routing required.
9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10. Familiarity with aircraft STC procedures preferred.
11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11994
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/19/2019
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Technical Designer 3

Description:
Chipton-Ross is seeking an Electrical Technical Designer 3 for an opportunity in Tukwila, WA

RESPONSIBILITIES:
Support the development, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
Using design tools prepares documentation and incorporates design changes.
Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Supports engineering system design and functionality validation activities.
Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
Coordinates activities and products with internal partners and external suppliers.
Works under general direction.

REQUIRED EXPERIENCE:
5 or more years of designing or supporting electrical wire harness Installations

Preferred Qualifications (Desired Skills/Experience):
Active security clearance is preferred
Client Defense Experience preferred but not required

EDUCATION:
Education/experience typically acquired through advanced education (e.g. Associate) and typically 5 or more years' related work experience or an equivalent combination of education and experience

WORK HOURS:
Full-Time/First Shift

 
Job Number: 183851
Job Location: Tukwila, WA
Rate: $DOE
Duration: 6 months
Input Date: 01/02/2020
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.


Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB
 
Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 02/03/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical and Controls Engineer

Description:

PDS Tech, Inc. is seeking an Electrical and Controls Engineer, Muscatine, IA.

Summary:

  • Support the day-to-day electrical and instrumentation needs in a chemical manufacturing unit. This support may involve troubleshooting and some maintenance.
  • Together with process and mechanical engineers, develop scopes defining improvement projects (safety, yields, capacity, quality, reliability and cost improvement), including. alternatives and cost-benefit analysis, as needed.
  • Specify instruments (flow, pressure, temperature, etc.), control devices, motors, and other electrical components.
  • Review and evaluate vendor information for instrumentation and electrical components and determine suitability for specific projects applications.
  • Prepare maintenance plans for restoring and maintaining equipment to operating condition in a minimum amount of time, balancing repair cost and minimizing future failures.
  • Interacts with E&I maintenance technicians, production technicians, maintenance go-to, and others who work in and support the unit.
  • Create, modify and validate documentation related to process operations, safety, and applicable environmental regulations, as needed – including electrical drawings and engineering flow diagrams/P&ID diagrams.
  • Comply with plant safety rules.
  • Working knowledge of Engineering tools and software and ability to read and understand process flow diagrams, line drawings P&ID and schematics.


Prerequisites:

  • Looking for an electrical engineer who has experience within a manufacturing environment.
  • This position will be working with chemical and project engineers.

 
Job Number: 1910110239
Job Location: Muscatine, IA
Duration: 12 months
Input Date: 12/12/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Trudy Pollard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbiWQAQ&URLSource=cjhunter

Electrical/Electronic Installation Design

Description:
PDS Tech, Inc. is seeking an Electrical/Electronic Installation Design, in Tukwila, WA.

Summary:

  • Provides guidance in the development of cable/wire harness detail and assembly designs.
  • Provides guidance in the development of electrical product detail, assembly and installation designs.
  • Provides direction used by multiple teams to analyze complex results and performs design reviews.
  • Provides guidance in engineering design disposition on discrepancies.
  • Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
  • Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
  • Directs the technical review of supplier capabilities to facilitate source selection.
  • Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
  • Works under consultative direction.

Basic Qualifications 

  • (Required Skills and Experience):14 or more years of designing or supporting electrical wire harness Installations
  • Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications

  • (Desired Skills/Experience):Active security clearance is preferred
  • Defense Experience preferred but not required

 
Job Number: 1910110207
Job Location: Seattle, WA
Duration: 6 months
Input Date: 12/23/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Erin Singer
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbLeQAI&URLSource=cjhunter

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 02/19/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- AVCA

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Electromechanical Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a client site while also serving as the lead with customers, management and other technicians.



Responsibilities:

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required. Serving as customer point person,

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws.


Required Skills and Experience


  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Proven leadership/management experience

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided.

  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.


Candidates should be open to all shifts, weekends, overtime and holidays. Schedule will be determined between multiple technicians.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



 
 
Job Number: 20-00309
Job Location: Apple Valley, CA
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-07-17 00:00:00.0
Start Date: 2020-01-13 00:00:00.0
Input Date: 01/03/2020
Last Updated: 01/16/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electronic Systems Design & Analysis Engineer 3 - 374149

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 02/19/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engineer/Scientist 4

Description:
Chipton-Ross is seeking 3 Electrophysics Engineer/Scientist 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with
Reviewing supplier and partner qualification data
Nuclear Hardening analysis and test
EMI/C analysis and test
EMSEC/TEMPEST analysis and test
HIRF/Lightning analysis and test
RF Co-Site analysis
Antenna Coupling analysis
Electrical Power Quality and Load analysis
Test Automation for aircraft modifications

Other job responsibilities may include:
Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
Develops architectures to integrate systems and components into higher level systems and platforms.
Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
Defines and conducts tests to validate performance of designs to requirements.
Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
Writes appropriate sections of proposals to support development of new business.
Works under general direction.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182605
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

Description:
**Requires the ability to obtain Secret Clearance**

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

Other job responsibilities may include
•Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
•Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
•Develops architectures to integrate complex systems and components into higher level systems and platforms.
•Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
•Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
•Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
•Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
•Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
•Generates major sections of proposals to support development of new business.
•Works under minimal mentorship.

OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

•Reviewing supplier and partner qualification data
•Nuclear Hardening analysis and test
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test
•RF Co-Site analysis
•Antenna Coupling analysis
•Electrical Power Quality and Load analysis
•Test Automation for aircraft modifications.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374234
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 02/19/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engr/Scien 4

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate complex systems and components into higher level systems and platforms.
  • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Generates major sections of proposals to support development of new business.
  • Works under minimal mentorship.

Prerequisites:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108236
Job Location: OK City, OK
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQVrQAM&URLSource=cjhunter

Electrophysics Engr/Scien 5

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate multiple systems into higher level systems and platforms.
  • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
  • Develops new and improved modeling and simulation techniques.
  • Leads development and execution of critical tests to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Creates new tools to improve management of projects.
  • Leads development of major sections of large-scale proposals to support development of new business.
  • Works under consultative mentorship.

Prerequisites:
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
  • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance/TS is a plus.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108675
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJCQA2&URLSource=cjhunter

Embedded S/W Engineer - Clearance GA

Description:
2884-1 Embedded S/W Engineer
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 1/29/2020
End Date: 1/19/2021

Job Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $72.00 Hourly
 
Job Number: JE-2884-1S6
Job Location: Marietta, GA
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year plus extension
Input Date: 01/07/2020
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Marietta, GA
$72/hr
1 year+ W2 contract
First Shift, 4x10
*MUST HAVE AN ACTIVE DoD SECRET CLEARANCE*

Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.
Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
 
Job Number: 12017
Job Location: Marietta, GA
Rate: 72.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/07/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Employee Development Specialist 3

Description:
Chipton-Ross is seeking 7 Employee Development Specialist 3 for openings in Everett, WA.

RESPONSIBILITIES:
Conducts learning requirements analysis and establishes learning objectives. Designs and develops course content and instructional materials. Tests delivery environment and establishes system access requirements. Delivers content and assesses effectiveness based on learning objectives. Conducts customer workplace coaching sessions to improve individual or group performance. Deploys development tools and monitors implementation and performance outcomes.

REQUIRED EXPERIENCE:
Ability to teach mechanical skills to new employees coming into Foundational Training Department. Basic skills drilling in Aluminum, Titanium and composite material. Be able to instruct employees on how to use drill motor, rivet gun, buck rivets, set up a countersink, use a 90 motor and put parts together.

EDUCATION:
Accredited Bachelor's and typically 6 or more years related work experience, a Masters degree and typically 4 or more years related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM
 
Job Number: 183449
Job Location: Everett, WA
Rate: $DOE
Duration: 3 Months
Input Date: 12/05/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA.  Please send your resume to pzack@pdstech.com for consideration.  
 
  • Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
  • Provide design and process improvement feedback to engineers.
  • Able to work with minimal direction
  • Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
  • Knowledgeable in basic inspection and hand tools
  • Interpret drawings and instructions
  • Requires travel up to 20% of the time
  • Soldering experience including use of heat guns for shrink tubing operations a plus.
  • Leverages other factory resources and personnel to get work done for the team
  • Must be willing and able to obtain a security clearance
  • Perform other related duties as assigned
  • Ability to train other associates as needed.
  • Section inert welded parts a plus.
  • Ability to perform basic machining functions (no energetic parts). 
  • Oversees build and testing process flow of development hardware.      

  • Education Required:          High school diploma or equivalent.  Technical training and job related certifications preferably in special processes.
  • Experience Required:        3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

 
Job Number: 1910107309
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/26/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMSlQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician ( Goleta, CA ) 9304869 and 9448737

Description:
Engineering Technician ( Goleta, CA ) 9304869 and 9448737
6 Month contract

Pay rate: $25-36/hr W2

Mechanical Assembly Experience, Team Worker, Critical Thinking & Teachable. Soft skills will be key. Will need to have strong communication skills, and be able to take initiative.
Will be working with a variety of skill levels, and will need to learn NGIS specific products. Trainability is key .Resumes w/ RF Tech exp. are not relevant.

The majority of the work will involve: Mechanical assembly including threaded fastener and adhesive bonding using hand tools like torque wrenches, digital levels, calipers, force gauges. Some of the work for more skilled applicants could include: Electrical assembly including soldering (Jstd space addendum preferred), harnessing (crimping, connectorizing, dressing) The materials for the work will be composite panels, solar cells, and machined parts

Position is supporting solar arrays/space side of business. If cand. has only electrical assembly exp, they will NOT work. Cand must have strong mechanical assembly exp. Mechanical assembly AND Electrical Assembly exp is ok.
Cand. w/ background in service tech, automotive mechanics, etc. translate well. Will use tools such as torque wrench, treaded fasteners, caliper, and micrometers.
 
Job Number: 9304869 and 9448737
Job Location: Goleta, CA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 12/24/2019
Last Updated: 01/19/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F& DT Engineer

Description:
This position supports the development of aircraft structures as a Fatigue and Damage Tolerance analyst. Duties include performing fatigue and damage tolerance analyses for metallic parts. Methods include the use of both classical hand calculations and computer techniques to develop high strength to weight ratio structures.
Primary Responsibilities:
Perform durability and damage tolerance analyses to verify that structural integrity requirements have been met. Team assignments may include detail part sizing, layout maturation, trade study analysis, weight reduction efforts, certification activity, or in-service support.
Document analyses in support of trade studies or detail drawing sign-out for airframe structure. Contact customers, suppliers, and/or subcontractors to exchange technical data and to discuss project performance.
Additional Responsibilities:
Position requires in-depth knowledge of classical and numerical (Finite Element) stress analysis methods.
Provide leadership and on-the-job training for less experienced structural analysts.
Accept broad objectives with agreed deadlines, but establish the tasks required and how they should be completed. Capable of working independently.
Ensure application of best practices and identifies the need for enhanced processes, methods, and tools.
Utilize tool sets at an advance level.
Technical signature authority in assigned discipline if appropriate.
Education / Special Qualifications:
Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical) with a strong curriculum emphasis on structural design and analysis and mechanics of materials is required. A Master's Degree in Engineering is a plus.
Minimum 6 years total analysis experience in airframe design programs. At least 3 years of experience in F&DT or a master's degree with emphasis on fracture mechanics is desired.
Qualified Experience / Skills / Training:
Experience in airframe design, stress analysis, composites, MRB, FAR/JAR/CS/Part 21, Certification, CATIA, NASTRAN, PATRAN and HYPERWORKS is desired.
Proficiency with Microsoft Office Suite (Excel, Word, & PowerPoint) required.
Proficiency with G-Suite (Docs, Sheets, Slides) a plus.
Communication Skills:
Must be able to communication effectively in English (verbal and written)
Conversational in French and/or German is a plus, but not required.
 
Job Number: 1299425
Job Location: Wichita, KS
Rate: 60-75 hourly
Per Diem: yes
Overtime: possible
Duration: L-T
Start Date: ASAP
Input Date: 01/08/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

FAA Technician - Electronic - Level 2

Description:
PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • Ability to READ SCHEMATICS a PLUS- To diagose and repair circuitry
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 2-4 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS - Fine Pitch, Surface Mount and/or Through hole
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  •  
  • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st, 2nd or 3rd shift.
  • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
  • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

Please send your resume to mmarquez@pdstech.com today!!
 
Job Number: 1910109061
Job Location: Olathe, KS
Duration: 6 months
Input Date: 11/11/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVDRQA2&URLSource=cjhunter

Fabrication Specialist A

Description:
Chipton-Ross is seeking 6 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 02/19/2020
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Facilities layout / Manufacturing process Industrial Engineer

Description:
Facility Designer with special emphasis in Aeronautical Industrial Building design and integration, you will interface with the Facility Engineers, Process Engineers, Manufacturing Engineers and Maintenance staff to layout new facilities(Greenfield), utilities, structural components and equipment to ensure a fully functional project is provided to the end user, taking into consideration the ease of manufacturing, availability of materials, and constructability of the final product.

•Must be able to take concept drawings and sketches and produce a full complement of Architectural, Mechanical, Plumbing, HVAC, Electrical, etc drawings in accordance with the National CAD Standards.
•Uses geometric tolerancing methods to check fit, form, and function of the accuracy and content of Engineering CAD drawing and model files, PLM datasets and BOMs, and other engineering supporting documents.
•It is expected that the Facility Designer can perform routine sizing of piping and ductwork systems with final approval from the cognizant design engineer.
•Capable of developing restroom layouts, break room layouts, conference room layouts office furniture layouts, etc for use in new construction and remodel efforts.
•Able to integrate Structural and Architectural designs with other relevant disciplines such as Plumbing, Fire Suppression, HVAC, Electrical, etc.

o Bachelor’s Degree in relevant field. (education will be verified)
o Minimum of 5/10 years’ experience in light Industrial Facility and equipment designs.
 
Job Number: 222471
Job Location: Huntsville, AL
Rate: Hourly Rate 'Open'
Per Diem: yes
Overtime: possible
Duration: NEW project from the ground up - long term
Start Date: 2 weeks
Input Date: 10/31/2019
Last Updated: 02/19/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Flight Operations / URGENT - Clearance MD

Description:
Flight Operations
Work Location: Patuxent River, MD - RMS
Status: Open

Qty: 5
Desired Start Date: 12/9/2019
End Date: 2/26/2021

Job Description:
The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

Basic Qualifications
-Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.

CNE Work Location: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $74.00 Hourly
 
Job Number: LMRMS-2699-1S
Job Location: Patuxent River, MD
Rate: 74/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed-wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed-wing test aircraft
Experience performing analysis of post-flight data to determine pass/fail

We post all current job openings at www.hi-tecsolutions.com/jobs
 
Job Number: 148303
Job Location: Savannah, GA
Rate: 70.00 hrly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 01/09/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 01/09/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Flight Test Engineer

Description:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Unique Skills:
• Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
• Experience executing test procedures onboard experimental fixed wing test aircraft
• Experience performing analysis of post flight data to determine pass/fail

Essential Functions:
• Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
• Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
• Work with engineering and test pilots to define test points that are conducted on test aircraft
• Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
• Definition of the aircraft configuration to support the on aircraft test
• Tracks test points and updates pass/fail/repeat status
• Supports on aircraft ground/flight testing as required.
• Provides the judgment on acceptable test data during or post flight
• Processing of data following a test flight to document test results
• Development of flight test reports to show compliance with test requirements
• Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
• Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
• Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
• Conducts flight test brief with flight ops and engineering
• Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
• Generates and transmits post flight test summary
• Conducts debrief of test mission with test crew and engineering

Education and Experience Requirements:
• Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
 
Job Number: 24-378
Job Location: Savannah, GA
Rate: $55-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

Flight Test Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience executing test procedures onboard experimental fixed wing test aircraft.
3. Experience performing analysis of post flight data to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
4. Flight Test Engineer Certification may offset one year of experience requirement.

Position Purpose:
1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
5. Definition of the aircraft configuration to support the on aircraft test.
6. Tracks test points and updates pass/fail/repeat status.
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight.
9. Processing of data following a test flight to document test results.
10. Development of flight test reports to show compliance with test requirements.
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
14. Conducts flight test brief with flight ops and engineering.
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
16. Generates and transmits post flight test summary.
17. Conducts debrief of test mission with test crew and engineering.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Perform other duties as assigned.

Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12036
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Patuxent River, MD
$74/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
The Flight Test Engineer's primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.


-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.
**Must be a US Citizen. This position is located at a facility that requires special access and a Secret clearance to start.**

Basic Qualifications
-Bachelor's degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.
 
Job Number: 11933
Job Location: Patuxent River, MD
Rate: 74.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

Flight Test Instrumentation Engineer

Description:
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system.
Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.
Flexibility to make business travels and also possible relocation between Japan and US are expected.

Responsibilities:
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Bachelor degree along with a minimum of 1 year of flight test operations experience
-Or-
A minimum of 5 years experience in flight test operations in lieu of the degree
Excellent demonstrated verbal and written communication skills
Ability to defuse and resolve conflict among other team members
Ability to quickly learn new software and systems
Must be capable and comfortable working within a diverse team environment
Strong oral, written, and presentation communication skills

Desired
Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
Experience in design of instrumentation installation of sensors, wiring and equipment
Ability to perform strain gage installations
Knowledge of flight test operations and certification requirements.
Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols
Knowledge on telemetry and data monitoring systems

 
 
Job Number: 1910107312
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/26/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMT0QAM&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technician for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.

 
 Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108506
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIIQA2&URLSource=cjhunter

Flight Test Instrumentation Technologist

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technologist for a direct position in Moses Lake, WA.
Summary

As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Fabrication of support brackets and sheet metal parts
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108504
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSI8QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Operations Engineer F35

Description:
*This is a full time, 15 month contract position located in Patuxent River, MD*



We are hiring for a Flight Test / Instrumentation Operations Engineer, to work on F35 Test and Verification (T&V) including mechanical/electrical installations and modifications to the FTI Airborne Data Acquisition and Camera Systems, handle post flight data, attend pre/post-flight briefings, develop/maintain instrumentation configuration control documentation and data system configuration files and manage support requirements for real-time FTI system health monitoring in a mission control room environment.



Required:
*Experience in flight test engineering that involves some of the following: data acquisition, telemetry, digital/analog circuits, RF applications, sensors applications.
*Good instrumentation background.
*Ability to travel, as needed (more info on this during the interview)

*Active Top Secret Clearance
*4 year degree in an engineering discipline



Pluses:
*F35 experience

*Knowledge of instrumentation devices to develop, test, and troubleshoot data processing algorithms for aircraft data
*Familiarity with bus protocols;
*Developing, writing and executing data processing acceptance test procedures;
*Implementation of Windows workstations on an enterprise network;
*Knowledge of IADS; IRIG Chapter 10 recording; TMATS; GPS and IRIG time standards and receiving devices
*Proficient computer skills and Windows10/Microsoft Office user experience.
 
Job Number: 328
Job Location: Patuxent River, MD
Rate: $60-65hr
Per Diem: yes split
Input Date: 12/10/2019
Last Updated: 01/24/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Flight Test Spec I - Flight Test Engineer

Description:
PDS Tech is seeking an Flight Test Spec I - Flight Test Engineer for an open position in Savannah, GA.
 

Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of aircraft products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities Perform other duties as assigned.



 


Education and Experience Requirements:


Job Description


Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.



Unique Skills:

  • Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
  • Experience executing test procedures onboard experimental fixed wing test aircraft
  • Experience performing analysis of post flight data to determine pass/fail


Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 2010110562
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/10/2020
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fe9zQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fluids Engineer ( Ronkonkoma NY ) 9611440

Description:
Fluids Engineer ( Ronkonkoma NY ) 9611440
12 Month Contract , potential to go direct hire

Pay Rate: $60 /hr , maybe more for the right candidate

*Preferred Requirements:
- A high degree of computer literacy and proficiency with Microsoft Office (Word ,Excel and PowerPoint), familiarity with Microsoft Visio, Microsoft Project, AutoCAD and other drawing packages.
- Understanding of fluid system design, calculations and troubleshooting.
- Must have good communication skills and be able to write and deliver presentations in front of senior management and customers.

*Education Requirements:
- A Masters’ degree in Mechanical Engineering or Aerospace Engineering, OR a Bachelors Mechanical Engineering or Aerospace Engineering with 2 years’ experience.//

*Qualifications:
- Must be able to work effectively in a dynamic laboratory setting with a diverse technical team environment characterized by frequently changing tasks, new priorities and quick responses.
- Comfort with hands on interaction with various test hardware and tooling, instrumentation and facility support piping systems such as Hydrogen, Oxygen and fuel.
- Ability to function as self-starter.
- Strong written and oral communication skills.
- Understanding of engineering fundamentals.
- Familiarity with test requirement identification and evaluation.
- Experience in reading and understanding fluid system schematics, mechanical drawings, and parts lists.
- Experience in the analysis of large datasets.
- Experience test system design, integration and support.
- Experience working in a highly regulated industry with strict customer/process requirements.//

*Job Duties:
- Support fluid system design, P&ID generation, hardware specification and technician support for installation and checkouts.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs
- Test procedure and script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Assist with the preparation of test conditions and testing activities
- Assist with post test data analysis and communication of results.
- Assist with the development of review material, reports, documenting and presenting findings.
 
Job Number: 9611440
Job Location: Ronkonkoma, NY
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 01/05/2020
Last Updated: 01/19/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 12/16/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jennifer Morgan
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 02/19/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
City, State: ENG - Peoria
Email: driley@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=297938&job_number=297938

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 12/11/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is currently seeking InProcess Inspectors for Hollister, CA
 

Description:  


This position requires the ability to perform limited visual, mechanical and electrical inspection functions in manufacturing areas under minimum supervision.  The individual must be dedicated to the quality function and a drive to enhance the quality of both the product and processes. 
 
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a lower level technical nature with record keeping as a major part of the duties.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a "go/no-go" nature.
  • Interpret basic drawings and instructions.
  • Uses a variety of precision measuring instruments.
  • Other functions that may be assigned.

 
  • High School Diploma,  college-level business courses a plus
  • Knowledge in the use of basic mechanical measuring tools
  • Ability to interpret basic drawings and instructions
  • Basic computer skills, MS Office knowledge
  • Good problem solving skills
  • Good written, verbal, mathematical and analytical skills
  • United States Citizen  

 
Job Number: 1810088645
Job Location: Hollister, CA
Duration: 3 months
Input Date: 10/30/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mci4AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - 2nd Shift - no clearance FL

Description:
Job Title: Inspector

Work Site Address: Clearwater, FL 34677
Job Number: 2295-1
Max Pay Rate: $25.00/hr
Start Date: 10/28/2019
End Date: 10/16/2020
Position Type: Contract

Job Summary:
Uses work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards.

May monitor and verify quality in accordance with statistical process or other control procedures. Communicates effectively with assemblers, engineers, and management when resolving quality issues.

Qualifications and Education Requirements
No Degree Required
-Candidate has a strong background in the manufacturing process of electro-mechanical printed circuit boards.
-Has the willingness and ability to perform assembly tasks related to assigned inspection areas as needed.
-Experience with soldered connections on Printed Circuit Card assemblies using IPC-A-610 and J-STD-001 standards.
-Detail-oriented and proficient at interpreting drawings, diagrams, parts lists, IPC manuals, revision control, reference documents and work instructions.
-A team player with strong verbal and written communication skills. Interfaces effectively and diplomatically with assemblers, test technicians, engineers, customers and management when resolving quality issues.
-Proficient with Personal Computers.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills J-STD-001 Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years
Technical Skills Visual Inspection Yes 1 2 - 4 Years


Qty 2 positions
2nd Shift
 
Job Number: LMRMS-2295-1
Job Location: Clearwater, FL
Rate: 25/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 10/11/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Instrumentation Engineer

Palmdale, CA
$100/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
Instrumentation Engineer
The selected candidate will be responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

The candidate will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Must be a US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position, an active Secret security clearance.

Basic Qualifications
* Bachelor's degree in Electrical/Electronics or Computer Engineering or related discipline.
* Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
* Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
* Using various CAD programs such as Catia, Autocad, etc.
* Using general test equipment such as oscilloscopes and spectrum analyzers.
* Understanding of IRIG 106
* Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
* GPS and IRIG time standards
* Video protocols and compression

The applicant must have excellent organizational and communications skills
* Applicant should have knowledge of Systems Engineering practices and concepts
* Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
* Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
* Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus
 
Job Number: 11930
Job Location: Palmdale, CA
Rate: 100.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/17/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $55-$58/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/17/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

Lead Hardware Engineer

Description:
A Lead Hardware Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for understanding and performing design and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

Lead Hardware Engineer Job duties:

* IPT Lead for a small team (3-5 people) of mechanical and electrical engineers responsible for hardware design, development, documentation, and life cycle support.
* Leads development of strategic tasks or small to mid-size projects by applying engineering and organizational knowledge and expertise to achieve technical goals.
* Monitors the project from initiation through delivery including planning and directing schedules and monitoring budget/spending.
* Responsible for the completion of assigned engineering tasks or mid-size projects within budgetary and scheduling guidelines.
* Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering tasks or small projects within area of assigned responsibility.

Qualifications:

* Develop and review engineering drawings and technical documentations. Proficient with using AutoCAD Inventor drawing and modeling software. Experience with hardware cabinets, enclosure, and structural design used in undersea platforms (i.e. submarines). Understand installation of equipment for thermal and mechanical stress/safety considerations. Good understanding and working knowledge of electrical hardware design and components.
* Strong experience with environmental qualification testing of hardware and system components, including EQT test development and execution.
* Strong experience and understanding with manufacturing and production processes, procedures, and standards (e.g. IPC620, ANSI, EIA, etc.). Support the build, inspection, and qualification of components, equipment, and assemblies.
* Solid understanding, experience, and working knowledge of the AN/BQQ-10 SONAR system.
* Program schedule and cost management and reporting. Understanding of EVMS is a plus.

If you are interested in this Lead Hardware Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298354
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/10/2020
Last Updated: 02/19/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
City, State: Phoenix
Email: dhart@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=298354&job_number=298354

Machine Operator

Description:
Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in Hollister/Monterey Bay area. Their company has a real impact on space exploration, homeland security and the nation's defense.

Every employee is an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems we face today. We are looking for those who are ready to reach the peak of technology.​

  • Support Overtime as required or scheduled by Supervisor.
  • Must have knowledge in the use of basic mechanical measuring tools (micrometers, microscopes, calipers, thread gages, etc.).
  • Perform dimensional and visual inspections of linear flexible explosive product during the manufacturing process using basic measurement tools using established procedures with minimum supervision.
  • Perform basic hands-on machine setup procedures and select machine dies and parts, according to specifications.
  • Install dies and other tooling into processing machines for subsequent processing.
  • Load the extruder with plastics that feed the machine according to production line requirements.
  • Recognize and replace worn dies when products vary from specifications.
  • Spool processed products into rolls of specified lengths and weights.
  • Troubleshoot, maintain, and make minor repairs to machine equipment.
  • Maintain clean work areas.
  • Adjust controls to process materials into specified shapes and diameters.
  • Process explosive materials remotely on various types of equipment; Swagers, Form Mills, Square Chuck, Yoder, Draw Bench, Stationary Swager, and Extruder.
  • Process energetic powder from free flowing to pelletized material using a Stokes Rotary Press.
  • Must possess the ability to interpret basic drawings and instructions.


 
Education Required:     High school diploma or equivalent
Experience Required:    0-3 years related experience
 
Job Number: 1810093673
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/17/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f8CgAAI&URLSource=cjhunter

Machine Operator

Description:
Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in Hollister/Monterey Bay area. Their company has a real impact on space exploration, homeland security and the nation's defense.

Every employee is an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems we face today. We are looking for those who are ready to reach the peak of technology.​

  • Support Overtime as required or scheduled by Supervisor.
  • Must have knowledge in the use of basic mechanical measuring tools (micrometers, microscopes, calipers, thread gages, etc.).
  • Perform dimensional and visual inspections of linear flexible explosive product during the manufacturing process using basic measurement tools using established procedures with minimum supervision.
  • Perform basic hands-on machine setup procedures and select machine dies and parts, according to specifications.
  • Install dies and other tooling into processing machines for subsequent processing.
  • Load the extruder with plastics that feed the machine according to production line requirements.
  • Recognize and replace worn dies when products vary from specifications.
  • Spool processed products into rolls of specified lengths and weights.
  • Troubleshoot, maintain, and make minor repairs to machine equipment.
  • Maintain clean work areas.
  • Adjust controls to process materials into specified shapes and diameters.
  • Process explosive materials remotely on various types of equipment; Swagers, Form Mills, Square Chuck, Yoder, Draw Bench, Stationary Swager, and Extruder.
  • Process energetic powder from free flowing to pelletized material using a Stokes Rotary Press.
  • Must possess the ability to interpret basic drawings and instructions.


 
  • Education Required:     High school diploma or equivalent.
  • Experience Required:    0-3 years related experience; 

 
Job Number: 1810089357
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/09/2019
Last Updated: 02/19/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgVGAAY&URLSource=cjhunter

Machinist III

Description:
We are currently seeking an experienced Machinist to fill a role with an international manufacturing company in Chesapeake, VA. This position will require setting up, adjusting and operating machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance. Interested candidates should have a exposure to technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning, and/or multitasking machines as as well as expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.

Responsibilities of the Machinist III
Set up, adjust and operate machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance.
Read and interpret blueprints in both imperial and metric standards.
Calculate dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings.
Test cut / dry run CNC programs prior to production runs.
Follow Process Sheets, Process Maps, Standard Operating Procedures and Poka-Yoke systems implemented by the Manufacturing Engineering and Shop management to generate predetermined production volumes, while ensuring best quality and lead times.
Ensure adherence to routed hours and target efficiencies for production.
Provide feedback on equipment, tooling, jigs, fixtures, and work holding solutions to reduce setup times and eliminate rework and recommend any modifications for improved efficiency in assigned areas.
Work closely with Machine shop supervisors, quality assurance and maintenance personnel to proactively prevent problems with machining cells and tooling/fixtures as well as provide ways to improve efficiency, cost, layout and safety.
Machine prototype parts on request.
Ensure all manufacturing safety and regulatory policies and procedures are implemented and maintained at all times.
Actively champion and maintain a culture of 5S (Sort, Set and Order, Shine, Standardize and Sustain) in the machine shop.
Provide training for other operators when required.
Be an active resource in time studies to analyze processes and validate recommended process changes.


Requirements
15 years of experience operating a mix of manual, semi-automatic, and CNC machine tools in a fast paced work environment including:
At least 5 years of manual machining experience.
At least 10 years of CNC machining experience.
At least 5 years of experience in high volume – low mix production.
At least 5 years of experience in low volume – high mix production
At least 2 years of experience in multi-pallet machines, pallet controller systems, 4+Axis/5-Sided machining, or bar-fed lathes desired but not essential.
Expertise and experience in using common measuring instruments (micrometers, calipers, height/depth/bore gauges,) and tool presetters.
Expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.
Expertise in calculating dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings/standards.
Expertise and experience in measuring perpendicularity, parallelism, concentricity and run out in micron or sub-micron level resolutions on manufactured components.
Proficiency in reading CNC programs, and ability to edit programs in order to make corrections and/or improve efficiency.
Proficiency in setup, operation and basic maintenance of multi-axis CNC lathes; mills – horizontal and vertical - including multipallet machining centers; grinders; boring machines; broaches; Gear generation and testing equipment.
Proficiency in setup, operation and basic maintenance of Manual lathes, mills, grinders, tool grinders, drills, broaches, shears, gear hobber, band saw.
Experience with technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning and/or multitasking machines.
Ability to set up, adjust and operate all machine tools in order to perform precision machining operations while holding very close tolerances, and with minimal assistance.
Good understanding of Tooling/Jig and Fixture design for machining operations.
Ability to read and understand complex Engineering drawings/Blueprints.
Excellent grasp of mathematics (including geometry and trigonometry), and good understanding of mechanical systems.
Proven competency in calculating complex dimensions and tight tolerances.
Good understanding of Metallurgy.
Complete understanding of common gauges and measuring instruments (gauge blocks, micrometers, calipers, height gauge, depth gauge, bore gauges, Mahr gages, etc.).
Experience in accurately diagnosing tool wear by visual inspection or by listening to the process, and in making necessary adjustments to control the process.
Basic understanding of DNC control for CNC programs and Machine monitoring systems desired but not essential.
Ability to setup and operate multiple CNC machine tools simultaneously (for proven processes).
Commitment to Lean production values such as Pull processing, Perfect first-time quality, Single piece flow, Waste minimization, Continuous improvement and Visual Control.
Good initiative, work ethics and ability to work individually and in team settings.
Strong personal ethics.
Excellent conflict resolution skills.
Strong communication skills.
 
Job Location: Chesapeake, VA
Input Date: 01/30/2020
Last Updated: 02/12/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: abondy@velocity-cs.com
Website: www.velocity-cs.com