Job Search Results

507 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/10/22 Thursday 08:19AM Pacific Time by ContractJobHunter. )

Listings 1 - 507

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2592 - PROJECT MANAGER - cv, work doc only

Description:
Evaluate and propose state-of-the-art technology acquisition opportunities for the machining, sheet metal, composite and assembly sectors, enabling the organization to achieve technological excellence.

Evaluate, participate and manage continuous improvement initiatives required to manufacture air crafts.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, acquisition, implementation and commissioning.

Manage budget, schedule and resources in every project phase. Prepare and present progress status at different management levels.

Align resources involved in project and be the interface between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

Minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Have strengths in human resource management as part of matrix project management.

Have a PMI certification (asset).

Have good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2592
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 12/30/2019
Last Updated: 04/27/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 10/24/2019
Last Updated: 02/21/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB F-16 - no clearance SC

Description:
167210 Job Title: Aeronautical Engineer

Work Site Address: Greenville, SC 29605
Job Number: 2918-1
Max Pay Rate: $44.00/hr
Start Date: 1/27/2020
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Looking for engineer to be part of the new Production of the F-16 and other project opportunities.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.
Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Primary duties of this job will support the Planning tasks as the production planning is created, support the on-site MRB engineers to include anomaly investigation, technical solution development and coordination with the MRB engineer for preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Additionally, this position requires skills as an Airframe Design Engineer to use their technical expertise to design aircraft structure and subsystems installations. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structure design. The candidate will be responsible for layout and detail modeling of aircraft structure, structural assemblies, layouts and detail drawings using CATIA V5 and CADDAM, participating in trade studies, creating and maintaining interface control drawings, and coordination with Integrated Product Teams.

The engineering candidate will be required to coordinate across many functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action.

Qualifications and Education Requirements
Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.
Candidate must value and support diversity.
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Skills: Category Name Required Importance Experience
Areas of Expertise CATIA No 4
Areas of Expertise F-16 No 2
Technical Skills Ability to Read Engineering Drawings Yes 1
Technical Skills Engineering Design Principles Yes 3
Technical Skills Configuration Management No 5

Qty 2 position
 
Job Number: JEG-2918-1
Job Location: Greenville, SC
Rate: 44/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 01/10/2020
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Design Support Engineers

Description:
Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
 
Job Number: 1231
Job Location: Baltimore, MD
Rate: $60-$75 DOE
Per Diem: yes-split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 02/07/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Greg Ambrose
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/30/2019
Last Updated: 03/20/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis Engineer (Level 2, 3, 4)

Description:
Future Vertical Lift Program

Our client is seeking an Airframe Structural Analysis engineer to join the company’s Future Vertical Lift programs working
new product development in an innovative and dynamic design environment. The Airframe Structural Analysis Engineer
is responsible for analyzing airframe structures for stress and strength requirements, material selection, stiffness
requirements, weight optimization, and performance for the company's Military and Commercial Programs. 


Position Responsibilities:
- Apply basic engineering principles/concepts to complete tasks under the supervision of the technical lead engineer
- With technical oversight, applies scientific analysis and mathematical models to predict and measure the outcome and
consequence of design, in terms of stress, strength, life, stiffness, and weight
- Demonstrate critical thinking & creative 'out of the box' thinking
- Communicate to team members effectively
- Demonstrate basic knowledge of aircraft structure, Bell design and production processes, and structural analysis tools
- Develop solutions to routine technical problems of limited scope

Education Requirements:
- Bachelor's Degree in Mechanical or Aerospace Engineering or equivalent is required
- Master’s Degree is preferred

Position Requirements:
- Experience at all levels will be considered with a minimum of 2 years related experience.
- PC proficiency in NASTRAN / PATRAN, Microsoft Word, Excel, PowerPoint, and Outlook is preferred
- Previous structural stress and fatigue analysis experience preferred
- Must have the ability to work effectively within a team
- Must have the ability to prioritize a variety of assignments
- Good interpersonal and organizational skills are required

Please send resumes to Becky at bnorman@butler.com. Phone number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58547
Job Location: Fort Worth, TX
Rate: Market
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: February 2020
Input Date: 01/07/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166612 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2358-1
Max Pay Rate: $21.00/hr
Start Date: 10/26/2019
End Date: 10/26/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.


Skills: Category Name Required Importance Experience
Technical Skills Ability to work in a production environment Yes 4 1 - 2 Years
Technical Skills Assembly Process Yes 5 1 - 2 Years
Technical Skills Basic Computer Skills Yes 6 1 - 2 Years
Technical Skills IPC-A-610 Yes 3 1 - 2 Years
Technical Skills IPC-J-STD Yes 2 1 - 2 Years
Technical Skills Soldering Yes 1 1 - 2 Years


Qty 3 positions
A BS Degree is NOT required for these positions.
 
Job Number: LMRMS-2358-1
Job Location: Marion, MA
Rate: 21/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166646 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2461-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position does not require a BS Degree.
Prefer candidates with J Standard as well as IPCA 6-10 and 6-20.

Qty 1 position
Hiring Manager would prefer to see candidates with J Standard as well as IPCA 6-10 and 6-20.
 
Job Number: LMRMS-2461-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance VA

Description:
167392 Job Title: Assembler

Work Site Address: Manassas, VA 20110
Job Number: 3021-1
Max Pay Rate: $25.00/hr
Start Date: 2/9/2020
End Date: 2/28/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
The candidate will support Prep for Ship activities in the Paint/Prep area for all Manassas programs.
Activities will include paint / touch-up of units, preparing unit deliverables for presentation / sell-off to customer, and the coordination and presentation of units for final sell-off to various Navy customers.
This position may have some very light assembly work.

Qualifications and Education Requirements
This position does NOT require a BS degree. HS diploma is required.
1-3 years of manufacturing experience.

Qty 1 position
Hourly Pay Rate Range is $18-$25 based on candidates experience.
 
Job Number: LMRMS-3021-1
Job Location: Manassas, VA
Rate: 18-25/hr max
Duration: 12 months
Input Date: 01/17/2020
Last Updated: 02/04/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / cable harness, soldering required - no clearance FL

Description:
167182
Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2902-1
Max Pay Rate: $22.00/hr
Start Date: 1/6/2020
End Date: 12/18/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Mandatory Must be able to Solder
• Must have good manual dexterity
• Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
• experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Use of manual and automatic wire strippers.
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions.

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years
Technical Skills Cable Harness Yes 5 2 - 4 Years

Qty 3 positions
 
Job Number: LMRMS-2902-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 12/20/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering / assembly experience - no clearance URGENT MA

Description:
167109 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2561-1
Max Pay Rate: $15.00/hr
Desired Start Date: 12/30/2019
End Date: 12/28/2020

Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position DOES NOT require a BS

Skills: Category Name Required Importance Experience
Technical Skills Assembly Process No 1 < 1 Year Technical Skills Soldering No 1 < 1 Year Qty 9 positions
 
Job Number: LMRMS-2561-1
Job Location: Marion, MA
Rate: 15/hr max
Duration: 12 months
Input Date: 12/09/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering experience required - 2nd Shift - no clearance URGENT MA

Description:
166645 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2458-1
Max Pay Rate: $20.00/hr
Start Date: 11/4/2019
End Date: 11/2/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This is an Entry Level position.
This position does not require a BS Degree.

Skills: Category Name Required Importance Experience
Technical Skills Soldering No 1 < 1 Year Qty 1 position 2nd shift
 
Job Number: LMRMS-2458-1
Job Location: Marion, MA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 02/14/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician

Description:
Avionic Technician

Job ID # 2019-10491

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

 

What You’ll Do:

Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
Work from schematics, engineering drawings and written or verbal instructions.
Operate related equipment; conducts tests and reports data in prescribed format.
Perform calibration and alignment checks.
Make adjustments, modifications, and replacements as directed.
Prepare prescribed compounds and solutions.
 

What You’ll Need:

Modification experience strongly desired.
Must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
Areas if Expertise: C-130.
This position supports a 9/80A-1st shift work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2020-10491
Job Location: Greenville, SC
Input Date: 01/07/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 01/13/2020
Last Updated: 03/04/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 02/10/2020
Last Updated: 04/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 desired - no clearance SC

Description:
165856/1895-1
Avionic Technician
Greenville, SC 29605
29/hr max

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

Areas of Expertise C-130 No 1 4 - 6 Years

Qty 5 positions needed
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG-1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/01/2019
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 04/06/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V Design Engineer

Description:
*This is a 1 year contract position, on site only position, located in Orlando*



We are seeking a Mechanical Designer who has experience in mechanical design with a background in military applications (including including Safety of Flight /SOF) and standards.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.



Required:

*10 years’ experience in designing using Catia V

*Experience with ASME Y14.5M-1994; GD&T (Dimensioning & Tolerancing)

*Active Secret or Interim to start; US Citizens Only Please

*Intralink PDM experience

*Engineering degree



Pluses:

*Knowledge ASME Y14.24M engineering drawings and general drafting practices of IAW ASME Y14.100.

*Familiar with MIL-T-3100 and MIL-STD 100
 
Job Number: 056
Job Location: Orlando, FL
Rate: $65.00
Per Diem: yes split
Input Date: 12/26/2019
Last Updated: 01/17/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Engineering (Structural/Mechanical)

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• This position is in the Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad.
• Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations.
• The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft.
• Designers will create data consistent with industry accepted drafting practices and company standards.
• Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
• Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
 
Job Number: 24-380
Job Location: Appleton, WI
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 01/08/2020
Last Updated: 03/20/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Processing Engineer

Description:
Data Processing Engineer

Palmdale, CA
$90/hr
15 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
This company is looking for someone to join the historic Skunk Works™ as a flight test data processing engineer. The candidate will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale.

The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
* Receive, process and troubleshoot IRIG 106 formatted data products per established processes
* Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
* Diagnosis and resolution of problems encountered in the recovery of test data
* Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

The applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires an active Secret security clearance.

Must be a US Citizen. This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.

Desired skills
The ideal candidate possesses:
* Experience with IT infrastructure operations, computer networking, and/or software programming concepts
* Experience in data processing and network system administration
* Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
* Programming in C/C++
* Security+ certification
* Subject Matter Expert in data collection systems
* Experience working with the LM application Common Data Processing
* Experience with installation of Network Server systems for data processing
* Experience working in flight test
* Hardware and/or software programming experience
* Understanding of IRIG 106
* Experience with various instrumentation vendors hardware and software
* Symvionics IADS (Interactive Analysis and Display System) use and programming
* Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
* Demonstrated ability to develop and implement process improvement initiatives
* Excellent communication skills
* Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)
 
Job Number: 11924
Job Location: Palmdale, CA
Rate: 90.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11964
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/13/2019
Last Updated: 03/06/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 11965
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/13/2019
Last Updated: 03/06/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/01/2020
Last Updated: 05/09/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer 3

Location: Tukwila, WA
Duration: 6 Months

Job Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Support the development, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- 5 or more years of designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced education (e.g. Associate) and typically 5 or more years' related work experience or an equivalent combination of education and experience

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code:
65L-Wiring Installation Design
 
Job Number: 20-00039
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 1/31/2020
Input Date: 01/09/2020
Last Updated: 01/24/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Capitol Logic & Harness XC

Description:
Unique Skills:
1. Mentor Graphics Capitol Logic and Harness XC experience required.
2. Catia V5 experience preferred.
3. 14 CFR 25 Subpart H - EWIS based design experience required.
4. Completions electrical system design experience preferred.
5. Part 25 Certification experience for cabin interiors preferred.
6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
7. Experience with power distribution, lighting, switching, and harness routing required.
8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
9. Familiarity with aircraft STC procedures preferred.
10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11995
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/19/2019
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/04/2020
Last Updated: 03/30/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 20- 148741
Job Location: Savannah, GA
Per Diem: Split
Overtime: Possible
Start Date: ASAP
Input Date: 01/06/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12016
Job Location: Savannah, GA
Rate: $59.52 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12014
Job Location: Savannah, GA
Rate: $53.17 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 20- 148741
Job Location: Savannah, GA
Per Diem: Split
Overtime: Possible
Start Date: ASAP
Input Date: 02/28/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Location: GA
Input Date: 01/06/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-376
Job Location: Savannah, GA
Rate: $55-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 03/09/2020
Last Updated: 03/18/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-377
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 03/09/2020
Last Updated: 03/18/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 04/23/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/19/2019
Last Updated: 04/23/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Design - Completions

Description:
1) Electrical Harness Installation (EHI) design experience required.
2) Catia V5 experience required.
3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4) 14 CFR 25 Subpart H - EWIS based design experience required.
5) Completions electrical system design experience preferred.
6) Part 25 Certification experience for cabin interiors preferred.
7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8) Experience with power distribution, lighting, switching, and harness routing required.
9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10) Familiarity with aircraft STC procedures preferred.
11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


Education and Experience Requirements:

1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-369
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Design Engineer

Description:
Unique Skills:
1. Electrical Harness Installation (EHI) design experience required.
2. Catia V5 experience required.
3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4. 14 CFR 25 Subpart H - EWIS based design experience required.
5. Completions electrical system design experience preferred.
6. Part 25 Certification experience for cabin interiors preferred.
7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8. Experience with power distribution, lighting, switching, and harness routing required.
9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10. Familiarity with aircraft STC procedures preferred.
11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11994
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/19/2019
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.


Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB
 
Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 02/03/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- AVCA

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Electromechanical Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a client site while also serving as the lead with customers, management and other technicians.



Responsibilities:

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required. Serving as customer point person,

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws.


Required Skills and Experience


  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Proven leadership/management experience

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided.

  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.


Candidates should be open to all shifts, weekends, overtime and holidays. Schedule will be determined between multiple technicians.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



 
 
Job Number: 20-00309
Job Location: Apple Valley, CA
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-07-17 00:00:00.0
Start Date: 2020-01-13 00:00:00.0
Input Date: 01/03/2020
Last Updated: 01/16/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Clearance GA

Description:
2884-1 Embedded S/W Engineer
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 1/29/2020
End Date: 1/19/2021

Job Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $72.00 Hourly
 
Job Number: JE-2884-1S6
Job Location: Marietta, GA
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year plus extension
Input Date: 01/07/2020
Last Updated: 04/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Marietta, GA
$72/hr
1 year+ W2 contract
First Shift, 4x10
*MUST HAVE AN ACTIVE DoD SECRET CLEARANCE*

Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.
Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
 
Job Number: 12017
Job Location: Marietta, GA
Rate: 72.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/07/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician ( Goleta, CA ) 9304869 and 9448737

Description:
Engineering Technician ( Goleta, CA ) 9304869 and 9448737
6 Month contract

Pay rate: $25-36/hr W2

Mechanical Assembly Experience, Team Worker, Critical Thinking & Teachable. Soft skills will be key. Will need to have strong communication skills, and be able to take initiative.
Will be working with a variety of skill levels, and will need to learn NGIS specific products. Trainability is key .Resumes w/ RF Tech exp. are not relevant.

The majority of the work will involve: Mechanical assembly including threaded fastener and adhesive bonding using hand tools like torque wrenches, digital levels, calipers, force gauges. Some of the work for more skilled applicants could include: Electrical assembly including soldering (Jstd space addendum preferred), harnessing (crimping, connectorizing, dressing) The materials for the work will be composite panels, solar cells, and machined parts

Position is supporting solar arrays/space side of business. If cand. has only electrical assembly exp, they will NOT work. Cand must have strong mechanical assembly exp. Mechanical assembly AND Electrical Assembly exp is ok.
Cand. w/ background in service tech, automotive mechanics, etc. translate well. Will use tools such as torque wrench, treaded fasteners, caliper, and micrometers.
 
Job Number: 9304869 and 9448737
Job Location: Goleta, CA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 12/24/2019
Last Updated: 01/19/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F& DT Engineer

Description:
This position supports the development of aircraft structures as a Fatigue and Damage Tolerance analyst. Duties include performing fatigue and damage tolerance analyses for metallic parts. Methods include the use of both classical hand calculations and computer techniques to develop high strength to weight ratio structures.
Primary Responsibilities:
Perform durability and damage tolerance analyses to verify that structural integrity requirements have been met. Team assignments may include detail part sizing, layout maturation, trade study analysis, weight reduction efforts, certification activity, or in-service support.
Document analyses in support of trade studies or detail drawing sign-out for airframe structure. Contact customers, suppliers, and/or subcontractors to exchange technical data and to discuss project performance.
Additional Responsibilities:
Position requires in-depth knowledge of classical and numerical (Finite Element) stress analysis methods.
Provide leadership and on-the-job training for less experienced structural analysts.
Accept broad objectives with agreed deadlines, but establish the tasks required and how they should be completed. Capable of working independently.
Ensure application of best practices and identifies the need for enhanced processes, methods, and tools.
Utilize tool sets at an advance level.
Technical signature authority in assigned discipline if appropriate.
Education / Special Qualifications:
Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical) with a strong curriculum emphasis on structural design and analysis and mechanics of materials is required. A Master's Degree in Engineering is a plus.
Minimum 6 years total analysis experience in airframe design programs. At least 3 years of experience in F&DT or a master's degree with emphasis on fracture mechanics is desired.
Qualified Experience / Skills / Training:
Experience in airframe design, stress analysis, composites, MRB, FAR/JAR/CS/Part 21, Certification, CATIA, NASTRAN, PATRAN and HYPERWORKS is desired.
Proficiency with Microsoft Office Suite (Excel, Word, & PowerPoint) required.
Proficiency with G-Suite (Docs, Sheets, Slides) a plus.
Communication Skills:
Must be able to communication effectively in English (verbal and written)
Conversational in French and/or German is a plus, but not required.
 
Job Number: 1299425
Job Location: Wichita, KS
Rate: 60-75 hourly
Per Diem: yes
Overtime: possible
Duration: L-T
Start Date: ASAP
Input Date: 01/08/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities layout / Manufacturing process Industrial Engineer

Description:
Facility Designer with special emphasis in Aeronautical Industrial Building design and integration, you will interface with the Facility Engineers, Process Engineers, Manufacturing Engineers and Maintenance staff to layout new facilities(Greenfield), utilities, structural components and equipment to ensure a fully functional project is provided to the end user, taking into consideration the ease of manufacturing, availability of materials, and constructability of the final product.

•Must be able to take concept drawings and sketches and produce a full complement of Architectural, Mechanical, Plumbing, HVAC, Electrical, etc drawings in accordance with the National CAD Standards.
•Uses geometric tolerancing methods to check fit, form, and function of the accuracy and content of Engineering CAD drawing and model files, PLM datasets and BOMs, and other engineering supporting documents.
•It is expected that the Facility Designer can perform routine sizing of piping and ductwork systems with final approval from the cognizant design engineer.
•Capable of developing restroom layouts, break room layouts, conference room layouts office furniture layouts, etc for use in new construction and remodel efforts.
•Able to integrate Structural and Architectural designs with other relevant disciplines such as Plumbing, Fire Suppression, HVAC, Electrical, etc.

o Bachelor’s Degree in relevant field. (education will be verified)
o Minimum of 5/10 years’ experience in light Industrial Facility and equipment designs.
 
Job Number: 222471
Job Location: Huntsville, AL
Rate: Hourly Rate 'Open'
Per Diem: yes
Overtime: possible
Duration: NEW project from the ground up - long term
Start Date: 2 weeks
Input Date: 10/31/2019
Last Updated: 03/19/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations / URGENT - Clearance MD

Description:
Flight Operations
Work Location: Patuxent River, MD - RMS
Status: Open

Qty: 5
Desired Start Date: 12/9/2019
End Date: 2/26/2021

Job Description:
The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

Basic Qualifications
-Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.

CNE Work Location: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $74.00 Hourly
 
Job Number: LMRMS-2699-1S
Job Location: Patuxent River, MD
Rate: 74/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed-wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed-wing test aircraft
Experience performing analysis of post-flight data to determine pass/fail

We post all current job openings at www.hi-tecsolutions.com/jobs
 
Job Number: 148303
Job Location: Savannah, GA
Rate: 70.00 hrly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 01/09/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 03/13/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Unique Skills:
• Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
• Experience executing test procedures onboard experimental fixed wing test aircraft
• Experience performing analysis of post flight data to determine pass/fail

Essential Functions:
• Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
• Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
• Work with engineering and test pilots to define test points that are conducted on test aircraft
• Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
• Definition of the aircraft configuration to support the on aircraft test
• Tracks test points and updates pass/fail/repeat status
• Supports on aircraft ground/flight testing as required.
• Provides the judgment on acceptable test data during or post flight
• Processing of data following a test flight to document test results
• Development of flight test reports to show compliance with test requirements
• Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
• Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
• Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
• Conducts flight test brief with flight ops and engineering
• Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
• Generates and transmits post flight test summary
• Conducts debrief of test mission with test crew and engineering

Education and Experience Requirements:
• Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
 
Job Number: 24-378
Job Location: Savannah, GA
Rate: $55-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience executing test procedures onboard experimental fixed wing test aircraft.
3. Experience performing analysis of post flight data to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
4. Flight Test Engineer Certification may offset one year of experience requirement.

Position Purpose:
1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
5. Definition of the aircraft configuration to support the on aircraft test.
6. Tracks test points and updates pass/fail/repeat status.
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight.
9. Processing of data following a test flight to document test results.
10. Development of flight test reports to show compliance with test requirements.
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
14. Conducts flight test brief with flight ops and engineering.
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
16. Generates and transmits post flight test summary.
17. Conducts debrief of test mission with test crew and engineering.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Perform other duties as assigned.

Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12036
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Patuxent River, MD
$74/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
The Flight Test Engineer's primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.


-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.
**Must be a US Citizen. This position is located at a facility that requires special access and a Secret clearance to start.**

Basic Qualifications
-Bachelor's degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.
 
Job Number: 11933
Job Location: Patuxent River, MD
Rate: 74.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Operations Engineer F35

Description:
*This is a full time, 15 month contract position located in Patuxent River, MD*



We are hiring for a Flight Test / Instrumentation Operations Engineer, to work on F35 Test and Verification (T&V) including mechanical/electrical installations and modifications to the FTI Airborne Data Acquisition and Camera Systems, handle post flight data, attend pre/post-flight briefings, develop/maintain instrumentation configuration control documentation and data system configuration files and manage support requirements for real-time FTI system health monitoring in a mission control room environment.



Required:
*Experience in flight test engineering that involves some of the following: data acquisition, telemetry, digital/analog circuits, RF applications, sensors applications.
*Good instrumentation background.
*Ability to travel, as needed (more info on this during the interview)

*Active Top Secret Clearance
*4 year degree in an engineering discipline



Pluses:
*F35 experience

*Knowledge of instrumentation devices to develop, test, and troubleshoot data processing algorithms for aircraft data
*Familiarity with bus protocols;
*Developing, writing and executing data processing acceptance test procedures;
*Implementation of Windows workstations on an enterprise network;
*Knowledge of IADS; IRIG Chapter 10 recording; TMATS; GPS and IRIG time standards and receiving devices
*Proficient computer skills and Windows10/Microsoft Office user experience.
 
Job Number: 328
Job Location: Patuxent River, MD
Rate: $60-65hr
Per Diem: yes split
Input Date: 12/10/2019
Last Updated: 01/24/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fluids Engineer ( Ronkonkoma NY ) 9611440

Description:
Fluids Engineer ( Ronkonkoma NY ) 9611440
12 Month Contract , potential to go direct hire

Pay Rate: $60 /hr , maybe more for the right candidate

*Preferred Requirements:
- A high degree of computer literacy and proficiency with Microsoft Office (Word ,Excel and PowerPoint), familiarity with Microsoft Visio, Microsoft Project, AutoCAD and other drawing packages.
- Understanding of fluid system design, calculations and troubleshooting.
- Must have good communication skills and be able to write and deliver presentations in front of senior management and customers.

*Education Requirements:
- A Masters’ degree in Mechanical Engineering or Aerospace Engineering, OR a Bachelors Mechanical Engineering or Aerospace Engineering with 2 years’ experience.//

*Qualifications:
- Must be able to work effectively in a dynamic laboratory setting with a diverse technical team environment characterized by frequently changing tasks, new priorities and quick responses.
- Comfort with hands on interaction with various test hardware and tooling, instrumentation and facility support piping systems such as Hydrogen, Oxygen and fuel.
- Ability to function as self-starter.
- Strong written and oral communication skills.
- Understanding of engineering fundamentals.
- Familiarity with test requirement identification and evaluation.
- Experience in reading and understanding fluid system schematics, mechanical drawings, and parts lists.
- Experience in the analysis of large datasets.
- Experience test system design, integration and support.
- Experience working in a highly regulated industry with strict customer/process requirements.//

*Job Duties:
- Support fluid system design, P&ID generation, hardware specification and technician support for installation and checkouts.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs
- Test procedure and script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Assist with the preparation of test conditions and testing activities
- Assist with post test data analysis and communication of results.
- Assist with the development of review material, reports, documenting and presenting findings.
 
Job Number: 9611440
Job Location: Ronkonkoma, NY
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 01/05/2020
Last Updated: 01/19/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 12/16/2019
Last Updated: 10/22/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 03/31/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 12/11/2019
Last Updated: 10/22/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - 2nd Shift - no clearance FL

Description:
Job Title: Inspector

Work Site Address: Clearwater, FL 34677
Job Number: 2295-1
Max Pay Rate: $25.00/hr
Start Date: 10/28/2019
End Date: 10/16/2020
Position Type: Contract

Job Summary:
Uses work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards.

May monitor and verify quality in accordance with statistical process or other control procedures. Communicates effectively with assemblers, engineers, and management when resolving quality issues.

Qualifications and Education Requirements
No Degree Required
-Candidate has a strong background in the manufacturing process of electro-mechanical printed circuit boards.
-Has the willingness and ability to perform assembly tasks related to assigned inspection areas as needed.
-Experience with soldered connections on Printed Circuit Card assemblies using IPC-A-610 and J-STD-001 standards.
-Detail-oriented and proficient at interpreting drawings, diagrams, parts lists, IPC manuals, revision control, reference documents and work instructions.
-A team player with strong verbal and written communication skills. Interfaces effectively and diplomatically with assemblers, test technicians, engineers, customers and management when resolving quality issues.
-Proficient with Personal Computers.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills J-STD-001 Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years
Technical Skills Visual Inspection Yes 1 2 - 4 Years


Qty 2 positions
2nd Shift
 
Job Number: LMRMS-2295-1
Job Location: Clearwater, FL
Rate: 25/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 10/11/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Instrumentation Engineer

Palmdale, CA
$100/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
Instrumentation Engineer
The selected candidate will be responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

The candidate will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Must be a US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position, an active Secret security clearance.

Basic Qualifications
* Bachelor's degree in Electrical/Electronics or Computer Engineering or related discipline.
* Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
* Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
* Using various CAD programs such as Catia, Autocad, etc.
* Using general test equipment such as oscilloscopes and spectrum analyzers.
* Understanding of IRIG 106
* Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
* GPS and IRIG time standards
* Video protocols and compression

The applicant must have excellent organizational and communications skills
* Applicant should have knowledge of Systems Engineering practices and concepts
* Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
* Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
* Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus
 
Job Number: 11930
Job Location: Palmdale, CA
Rate: 100.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/17/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $55-$58/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/17/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Hardware Engineer

Description:
A Lead Hardware Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for understanding and performing design and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

Lead Hardware Engineer Job duties:

* IPT Lead for a small team (3-5 people) of mechanical and electrical engineers responsible for hardware design, development, documentation, and life cycle support.
* Leads development of strategic tasks or small to mid-size projects by applying engineering and organizational knowledge and expertise to achieve technical goals.
* Monitors the project from initiation through delivery including planning and directing schedules and monitoring budget/spending.
* Responsible for the completion of assigned engineering tasks or mid-size projects within budgetary and scheduling guidelines.
* Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering tasks or small projects within area of assigned responsibility.

Qualifications:

* Develop and review engineering drawings and technical documentations. Proficient with using AutoCAD Inventor drawing and modeling software. Experience with hardware cabinets, enclosure, and structural design used in undersea platforms (i.e. submarines). Understand installation of equipment for thermal and mechanical stress/safety considerations. Good understanding and working knowledge of electrical hardware design and components.
* Strong experience with environmental qualification testing of hardware and system components, including EQT test development and execution.
* Strong experience and understanding with manufacturing and production processes, procedures, and standards (e.g. IPC620, ANSI, EIA, etc.). Support the build, inspection, and qualification of components, equipment, and assemblies.
* Solid understanding, experience, and working knowledge of the AN/BQQ-10 SONAR system.
* Program schedule and cost management and reporting. Understanding of EVMS is a plus.

If you are interested in this Lead Hardware Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298354
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/10/2020
Last Updated: 03/04/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist III

Description:
We are currently seeking an experienced Machinist to fill a role with an international manufacturing company in Chesapeake, VA. This position will require setting up, adjusting and operating machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance. Interested candidates should have a exposure to technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning, and/or multitasking machines as as well as expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.

Responsibilities of the Machinist III
Set up, adjust and operate machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance.
Read and interpret blueprints in both imperial and metric standards.
Calculate dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings.
Test cut / dry run CNC programs prior to production runs.
Follow Process Sheets, Process Maps, Standard Operating Procedures and Poka-Yoke systems implemented by the Manufacturing Engineering and Shop management to generate predetermined production volumes, while ensuring best quality and lead times.
Ensure adherence to routed hours and target efficiencies for production.
Provide feedback on equipment, tooling, jigs, fixtures, and work holding solutions to reduce setup times and eliminate rework and recommend any modifications for improved efficiency in assigned areas.
Work closely with Machine shop supervisors, quality assurance and maintenance personnel to proactively prevent problems with machining cells and tooling/fixtures as well as provide ways to improve efficiency, cost, layout and safety.
Machine prototype parts on request.
Ensure all manufacturing safety and regulatory policies and procedures are implemented and maintained at all times.
Actively champion and maintain a culture of 5S (Sort, Set and Order, Shine, Standardize and Sustain) in the machine shop.
Provide training for other operators when required.
Be an active resource in time studies to analyze processes and validate recommended process changes.


Requirements
15 years of experience operating a mix of manual, semi-automatic, and CNC machine tools in a fast paced work environment including:
At least 5 years of manual machining experience.
At least 10 years of CNC machining experience.
At least 5 years of experience in high volume – low mix production.
At least 5 years of experience in low volume – high mix production
At least 2 years of experience in multi-pallet machines, pallet controller systems, 4+Axis/5-Sided machining, or bar-fed lathes desired but not essential.
Expertise and experience in using common measuring instruments (micrometers, calipers, height/depth/bore gauges,) and tool presetters.
Expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.
Expertise in calculating dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings/standards.
Expertise and experience in measuring perpendicularity, parallelism, concentricity and run out in micron or sub-micron level resolutions on manufactured components.
Proficiency in reading CNC programs, and ability to edit programs in order to make corrections and/or improve efficiency.
Proficiency in setup, operation and basic maintenance of multi-axis CNC lathes; mills – horizontal and vertical - including multipallet machining centers; grinders; boring machines; broaches; Gear generation and testing equipment.
Proficiency in setup, operation and basic maintenance of Manual lathes, mills, grinders, tool grinders, drills, broaches, shears, gear hobber, band saw.
Experience with technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning and/or multitasking machines.
Ability to set up, adjust and operate all machine tools in order to perform precision machining operations while holding very close tolerances, and with minimal assistance.
Good understanding of Tooling/Jig and Fixture design for machining operations.
Ability to read and understand complex Engineering drawings/Blueprints.
Excellent grasp of mathematics (including geometry and trigonometry), and good understanding of mechanical systems.
Proven competency in calculating complex dimensions and tight tolerances.
Good understanding of Metallurgy.
Complete understanding of common gauges and measuring instruments (gauge blocks, micrometers, calipers, height gauge, depth gauge, bore gauges, Mahr gages, etc.).
Experience in accurately diagnosing tool wear by visual inspection or by listening to the process, and in making necessary adjustments to control the process.
Basic understanding of DNC control for CNC programs and Machine monitoring systems desired but not essential.
Ability to setup and operate multiple CNC machine tools simultaneously (for proven processes).
Commitment to Lean production values such as Pull processing, Perfect first-time quality, Single piece flow, Waste minimization, Continuous improvement and Visual Control.
Good initiative, work ethics and ability to work individually and in team settings.
Strong personal ethics.
Excellent conflict resolution skills.
Strong communication skills.
 
Job Location: Chesapeake, VA
Input Date: 01/30/2020
Last Updated: 04/02/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Tech II

Description:
Nesco has two open positions for Industrial Maintenance Technicians at the Northwest Dallas Plant. These positions will be full-time positions with benefits. Please see the description below for the position either 1st or 2nd Shift.



The Maintenance Technician II is responsible for the support of production equipment and other facility assets. This Technician must be able to perform preventative maintenance, troubleshoot, maintain and repair operating equipment during production and breakdowns. In addition, the Maintenance Technician will work with others to achieve plant business objectives of safety, productivity, customer service, quality, cost and environmental protection.

  • Troubleshoots production equipment and mechanical failures, repairs and performs preventive maintenance (PM) as required to ensure equipment reliability

  • Assists Operations, Quality and Engineering teams with root cause analysis for 5 Why's, Change management, Incident Management, and Non-Conformances to identify reasons for incident causes

  • Works with operators and support production and transfer skills to other technicians

  • Supports the daily operations of Planned Maintenance, Autonomous Maintenance, Corrective, Maintenance, and Preventive Maintenance, Predictive Maintenance standards while working with teams, focus priority, and plant directives.

  • Accurately and fully completes all regulatory and compliance-related documentation and procedures

  • Work with teams to fabricate machine parts as needed and responsible for shop cleaning and 6S

  • Understand and comply with company policies on safety standards

  • Helps maintain spare parts inventory and restocking inventory for the plant as needed

  • Ensures completion of work orders as scheduled and document in CMMS in a timely manner.

  • Reviews equipment instructions, blueprints, electrical, and pneumatic schematics to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or re-engineering of parts or subassemblies


Education Required:

HS Diploma or GED Equivalent

Work Experience Required:


  • Minimum of 5 years of industrial maintenance experience required

  • Mid to high level break-fix & preventative maintenance experience required

  • Strong knowledge of Fanuc, Mitsubishi and Allen Bradly controls

  • Experience with advanced PLC, and/or robotics, and CNC repair required

  • Experience in wrench forge a plus

  • Skills & Knowledge Required:

  • Ability to analyze, troubleshoot and perform repairs

  • Understands electrical, mechanical, fluid power and control systems

  • Understand Ohms law, voltage availability

  • Understand electrical; 460 VAC 3-phase and 110 VAC control sources as far as determining power

  • Knowledge of controls and PLC troubleshooting

  • Demonstrated ability to perform electronic, mechanical and hydraulic repairs used in electrical and mechanical maintenance technician work assignments

  • Must be able to use basic hand tools and specialized tools as appropriate

  • Basic Microsoft Office knowledge and/or Computerized Maintenance Management System (CMMS) knowledge desired

  • Excellent verbal/written communication and customer service skills

  • Additional traits and competencies that define the successful candidate are:

  • Team player attitude that is a highly disciplined, problem-solver with a strong work ethic

  • Physical Demands and Work Environment:

  • Regularly required to stand, walk, reach, stoop, kneel, crouch, and use hands

  • Required to lift and/or move 10 lbs regularly and up to 33 lbs occasional

  • Regularly exposed to moving mechanical parts, strong fumes, loud noises, and occasionally extreme temperatures




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-49535
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-01 00:00:00.0
Start Date: 2019-12-31 00:00:00.0
Input Date: 12/19/2019
Last Updated: 01/30/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer  perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Manufacturing Engineer ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer have proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer
- Experience with customer/supplier interaction
- Experience with Aluminum Brazing is preferred
- Expert level skills in Solid works and AutoCAD and Microsoft Excel are must.


- Prefer Minimum 3 years in Machining environment (Gear machining is plus)
- Prefer Good understanding of gear design & manufacturing principles – Cylindrical & Bevel gears is plus
- Prefer candidate Proficient with Blueprints, GD & T, PFMEA & APQP, PPAP and Control Plans
- Experience working in AS9100 regulated environments.
- Experience ion EPICOR is Prefer
- Knowledge of manufacturing support processes (i.e. inspection, gauging, SPC).



Education:

BS in mechanical or aerospace manufacturing engineering
 
Job Location: Westminster, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
A Manufacturing Engineer job opportunity in Wilson, NC is available through Belcan. To be considered for this role, you will have a Manufacturing, Mechanical or Industrial Engineering Degree plus three or more years of relevant work experience. In this role, you will utilize your hands on manufacturing experience to help design, fabricate and align linear sensor electro-mechanical assembly and test equipment to improve current production build process.

Manufacturing Engineer Job Duties:
* Suggest and help implement improvements for the product build process by working with others in Design and on the Product Build Team
* Work with Test Group to convert requirements into definitive tests and determine what of those can be met by similarity or analysis based on previous programs
* Develop test equipment and execution
* Drive specific tasks, including working directly with production and the other groups to improve the existing products and execute development hardware build up.
* Review and support investigation of production issues as they arise on the floor.
* Work with the Continuous Improvement Team to resolve issues, reduce scrap and improve efficiency.

Qualifications:

* Bachelors Degree in engineering (Manufacturing, Mechanical or Industrial)
* Minimum three years of relevant work experience
* Hands on manufacturing experience including equipment set up, test and operation
* Ability to work in a fast paced environment

If you are interested in this potentially long-term contract, Manufacturing Engineer job in Wilson, NC, please apply via the apply now link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the technical, IT, professional, and clerical fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 297478
Job Location: Wilson, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 01/17/2020
Firm Name: BELCAN TECHSERVICES
Attention: KatlinFaircloth
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 2

Description:
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.

Desired:
Experienced with SAP Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel). Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Strong written and verbal communication skills. Knowledge of Lean manufacturing concepts and techniques, Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts Leadership experience Experience in a Manufacturing environment

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5

Work Instruction Development Development of Work Manufacturing Instructions for CCA or C&H build in SAP. 3 0-3 Years Yes
Hardware Process Development CCA, ECA, and/or C&H 3 0-3 Years Yes
Direct Production Support Provide direction and training to hourly production workers 5 0-3 Years Yes

Special Needs
Category Description Recurring Frequency Mandatory
Training SAP No N/A No
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 19-16599
Job Location: Ocala, FL
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Input Date: 12/12/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.  

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:
  • Assist the Press Operator in running the production line.
  • Learn basic press operation. 
  • Pack finished product.
  • Operate finishing equipment.
  • Prepare tooling for production, including die inventory management and basic tooling set up.
  • Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
  • A fair and consistent pay check

Education:

• High school diploma or GED Required 



Experience:

• Prior experience in manufacturing preferred 

• Demonstrated mechanical aptitude via educational or job experience 



Skills:

• Basic computer navigation and data entry skills required 

• Basic to intermediate mechanical skills required 

• Ability to lift up to 50 lbs unassisted 

• Willingness and ability to perform in a fast paced team environment 

 
 
Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 09/11/2018
Last Updated: 10/22/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 08/27/2020
Last Updated: 09/22/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
Summary:
As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

On any given day you might:
• Support building and lead the Materials and Processes team for the aircraft development
• Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
• Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
• Perform trade studies, write proposals, and support new business development plans

We're looking for someone who has:
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
• 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 3+ years of experience leading technical resources and team
• Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
• Knowledge of composite certification and structural bonding requirements for Part 25 preferred
• In-depth and current knowledge of Part 25 regulatory requirements
• Demonstrated success in dealing and influencing internal and external stakeholders
• Experience in engineering support of aircraft production line activities is desirable
• Strong decision making and communication skills
• Excellent problem-solving skills across multi-disciplinary skill sets
• Experience in a global environment working with customers and suppliers

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-038
Job Location: Reno, NV
Rate: $75-$95/hr
Per Diem: YES
Overtime: Possible
Duration: 1+Year
Start Date: ASAP
Input Date: 03/09/2020
Last Updated: 03/18/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mech Sys Design & Anlys Engr 3

Description:
Mech Sys Design & Anlys Engr 3

Location: Mesa, AZ
Duration: 12+ Months

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Supports system components' designs/proposals standards to provide installation and detail documentation using NX. Trains others. Works under general direction

Skill Code: 63B-Mechanical System Design

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Location: Mesa, AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: asap
Input Date: 09/27/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. **Knowledge with placard creation/installation and/or seat engineering/installation highly preferred** -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 19-148601
Job Location: GA
Per Diem: Split
Overtime: Possible
Duration: Yaer Plus
Start Date: ASAP
Input Date: 01/06/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Experience with all aspects of mechanical design, including layout and design documentation. 5 to 10 experience of creating PRO E/CATIA drawings and drawing release. Proficiency with PRO E/CATIA and Intralink is require. Knowledge of drawing release procedures is desire. Good knowledge of all aspects of Mechanical engineering is essential. Ability to obtain a security clearance is mandatory
 
Job Number: 47639
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Bachelors of Science degree in Mechanical Engineering with a strong technical background, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).

Mandatory
Knowledge and proficiency with a model/drawing data management tool, Windchill. A general understanding or experience with manufacturing engineering and fabrication processes. Familiarity with Microsoft Office Applications. Prior LMC employment / experience is a plus.

Active Secret Clearance or Interim Clearance
 
Job Number: 47867
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Active Secret Clearance or Interim Clearance

Strong technical background, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 47867
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design and Analysis Engineer

Description:
Structural Analysis Engineer 1

Location: Ridley Park, PA
Duration: 12 Months

Description:
Performs limited structural analysis using well defined analysis tools to validate and verify systems and components meet requirements and specifications. Participates in various test activities substantiate for customers and regulatory agencies that requirements are satisfied. Works under close supervision.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) or an equivalent combination of technical education and experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 63Y-Structural Analysis
 
Job Location: Ridley Park, PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: asap
Input Date: 10/14/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Mechanical Designer

Description:
Automation, robotics, and Inventor
 
Job Location: Pittsburgh, PA
Input Date: 07/01/2019
Firm Name: BELCAN TECHSERVICES
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Email: bcampbell@belcan.com
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Checker CREO & Catia

Description:
*This is a full time, 9 month contract position, located in Orlando, FL*



We are seeking a Mechanical Designer/Checker who has experience in mechanical design with a background in military applications and standards.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.



Required:

*5 years’ experience in designing, checking and drawing release of military parts/systems (structures, materials, processors and parts selection).

*Predominantly Creo experience on resume

*Knowledge of Catia
*Experience with ASME Y14.5M-1994; GD&T (Dimensioning & Tolerancing)

*Active Secret Clearance; US Citizens Only Please

*Engineering AS/ME degree or significant experience in lieu of degree


Pluses:

*Mechanical Computer Aided Drawing (MCAD) skills

*Previous use of one or more PDMs

*Knowledge ASME Y14.24M engineering drawings and general drafting practices of IAW ASME Y14.100.

*Familiar with MIL-T-3100 and MIL-STD 100

*Engineering degree
 
Job Number: 156
Job Location: Orlando, FL
Rate: DOE
Per Diem: yes split
Input Date: 01/10/2020
Last Updated: 01/17/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

Description:
Desired Qualifications:
**Candidate must have an ACTIVE SECRET**
•Prefer 4+ years of directly related experience
developing 3D models and detailed drawings
using either Solid-works or NX, or Catia and AutoCAD
•Familiarity with aircraft systems or Simulation equipment experience.
 
Job Number: 658574
Job Location: mid west
Rate: competitive
Per Diem: yes
Overtime: possible
Duration: 12 month plus/contract
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 05/01/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years. An Interim Secret Clearance would be accepted****
****Looking for Candidates with Drafting skills that utilize 3D drafting software****

Job Description:
1. As a Mechanical Engineer, you will work as part of an engineering team based in Lexington, KY.
2. The team is focused primarily on modifying existing hardware and integrating modified components into various C-130 platforms based on customer specifications.
3. The primary function of this role is to design original components and assemblies as well as modify existing components, create and revise engineering drawings and documentation, and perform Design Engineering duties related to Engineering Change Notices (ECNs).
4. You will need to communicate effectively and regularly with fellow design engineers, manufacturing, documentation control, and installation crews.
5. This role includes design and drafting work as well, and as such your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
6. CATIA V5R26 and Teamcenter experience is preferred.

Education:
1. Level 1: BS+0-2 YRS
 
Job Number: 12009
Job Location: Lexington, KY
Rate: $38.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 01/14/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance KY

Description:
165604 Job Title: Mechanical Engineer

Work Site Address: Lexington, KY 40516
Job Number: 1783-1
Max Pay Rate: $63.00/hr
Desired Start Date: 9/12/2019
End Date: 12/13/2019
Position Type: Contract


Job Summary:
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.


Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS

Qty 3 positions required
 
Job Number: JE-1783-1S
Job Location: Lexington, KY
Rate: 63/hr max
Duration: 3 months +
Input Date: 10/01/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / CREO ANSYS GD&T - NJ

Description:
167325 Job Title: Mechanical Engineer

Work Site Address: Moorestown, NJ 08057
Job Number: 2989-1
Max Pay Rate: $45.00/hr
Start Date: 1/23/2020
End Date: 12/28/2020
Position Type: Contract


Job Summary:
Seeking Mechanical Engineers to work as part of an engineering team to develop radar system hardware including phased array antennas and their subassemblies; cabinets and their subassemblies (digital processing, power conversion, receiver/exciter). Engineers will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed packaging designs and assembly strategies. Work will be performed in our Moorestown, NJ location.

• Performing mechanical design, testing, production support or design analysis
• Performing finite element analysis
• Prepare and release of engineering specifications, parts lists and drawings
• Work with component technology and configuration management personnel
• Documentation and reporting of schedule, financial and technical progress on all task

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Qualifications
• BS in Mechanical Engineering
• 2+ years of experience
• Proficiency with CAD software
• Familiarity with Pro/Engineer CREO and ANSYS Workbench
• Experience with structural, fluid mechanics and heat transfer analysis techniques
• Knowledge of manufacturing methods and metal part fabrication techniques
• Knowledge of geometric tolerancing, military standards and drafting standards.
• Experience with developing drawings and parts lists (PL’s), Enterprise Product Data Management (EPDM), change request (CR) generation.
• Experience with environmental qualification testing
• Experience designing and packaging of Commercial off the shelf (COTS) equipment in isolated cabinets for naval applications.
• Excellent verbal and written communication skills

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise 3D Models Yes 1 2 - 4 Years
Areas of Expertise Computer Aided Design (CAD) Yes 1 2 - 4 Years
Areas of Expertise Mechanical Yes 1 2 - 4 Years
Areas of Expertise Mechanical and Electrical Systems Yes 1 2 - 4 Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 1 2 - 4 Years
Technical Skills Ansys No 1 2 - 4 Years

Qty 5 positions

Position is an EXEMPT position. Candidates must have all required skills listed clearly in resume
 
Job Number: LMRMS-2989-1ATO
Job Location: Moorestown, NJ
Rate: 45/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 01/21/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer 1 - no clearance CA

Description:
167134
Mechanical Engineer 1 (Job Number: 19035591)
Number of Openings: 4
Location(s): United States-California-Palmdale

Shift: 1st Shift
Target Start Date: Apr 6, 2020

Target End Date: Apr 2, 2021

Pay rate: $38/hr
Work schedule: 4/10
Duration: Up to 1 year
Location: Palmdale, CA
Clearance: None required
# of openings: 3

Position Summary / Responsibilities
Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Basic Qualifications:
0 Years with Bachelors in Science
 
Job Number: JK-1829
Job Location: Palmdale, CA
Rate: 38/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 12/10/2019
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Systems Design & Analysis Engineers -- Multiple Locations

Description:
Please call for details

Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Nationwide
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Mechanical Systems Design Engineer

Description:
Aircraft Engineering & Design--

10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
-System Engineering
-Architecture
-Design
-Integration
-Test or requirements activities
Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 53934
Job Location: California
Input Date: 07/02/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer - Thermal & Fluid

Description:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
Rocket or Vehicle background exp.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Mech-Thermal-FL
Job Location: Kennedy Space Center, FL
Rate: $73.00/hour+
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
POSITION SUMMARY:
Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

• 5+ years of experience.
• BS degree preferred
• Must have ON THE JOB EXPERIENCE with Solidworks.
• Preferably 5 years of experience from aircraft completions industry
• Must have experience designing waste water systems as that carries the most importance.
• They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
• Must be self-sufficient and NOT require guidance.
• It is preferred if they have experience with collaborating data in Solidworks.
• Experience with report writing


The Structures Company is an AA/EOE.
 
Job Number: 340
Job Location: IN
Rate: $57-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/20/2020
Last Updated: 05/09/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 01/27/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanical or Manufacturing Engineers

Description:
Project management or overhaul experience
 
Job Location: West
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-370
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 12/31/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-374
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 12/24/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11999
Job Location: Brunswick, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/23/2019
Last Updated: 02/07/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate:
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11978
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2019
Last Updated: 02/25/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Nesco Resource is recruiting a Metal Stamping Process Engineer with at least 5-7 year's experience to join our client in Winsted, CT. The Metal Stamping Process Engineer will plan and establishes sequence of operations to stamp parts and to promote efficient utilizationlead; recommend methods for improving utilization of of personal, materials and utilities manage; prepare reports for management review of maintenance operating system metrics, major issues and root cause report and initiate new continuous improvement projects. The Metal Stamping Process Engineer will also be responsible to lead and develop new shop floor layouts. The ideal Metal Stamping Process Engineer will have a strong knowledge of stamping and progressive stamping, lean tools and concepts and Kaizen events. AutoCAD preferred.



Required:

Bachelors of Science in Industrial Engineering or Manufacturing Engineering or Mechanical Engineering

Metal Stamping

Minimum 5-7 year's experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-44946
Job Location: Winsted, CT
Rate: 88000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-12-23 00:00:00.0
Input Date: 11/12/2019
Last Updated: 03/20/2020
Firm Name: NESCO RESOURCE
Attention: Michael Moritz
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 01/30/2020
Last Updated: 04/02/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 08/21/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector IV ( Dulles, VA ) 9572942

Description:
Quality Inspector IV ( Dulles, VA ) 9567561 and 9567413 and 9572500 and 9572942
6 Month Contract

Pay rate: $35 - $40/hr W2

Prior aerospace inspection skills
Job# 9567561 and 9567413 and 9572500 POSITION IS FOR 1st SHIFT
Job# 9572942 POSITION IS FOR 2ND SHIFT

**Top 3: Mechanical or electrical piece part inspection experience, good computer skills, good technical writing skills. team: Receiving Inspection work center currently consists of 5 other QAI’s who perform inspections on various types of piece parts and assemblies that we have procured from other suppliers.

Description:
1. Perform in-process and final inspections on product throughout the SMF work centers (Receiving, Manufacturing, Integration and Test) and perform product build documentation review and end-item data package review.
2. Perform detailed inspections on both EEE and Mechanical components at the piece part level as well as the assembly and sub-assembly level.
3. Uphold quality standards and workmanship practices in assigned work centers by learning/practicing process specifications and employing quality workmanship standards during everyday job functions.
4. Generate nonconformance reports for discrepancies discovered during inspection processes.
5. Perform audits of work areas to ensure compliance with Orbital Sciences Corporations ISO 9001/AS 9100 procedures and Lean Manufacturing Principles.
6. Perform in-depth reviews of product build documentation for configuration audit to determine if as-built meets as-designed.

Prerequisites:
1. Must be able to read engineering documentation and inspect to drawings and parts lists, inspection plans, and supplemental instructions
2. Minimum 5 years experience in Quality Assurance or relevant experience in Electrical or Mechanical field of work in performance of technical job function
3. Able to use Microsoft applications and ability to learn new computer programs/applications easily.
4. Basic technical writing skills are required

Desirables:
1. Associates (2 year) degree from accredited institution
2. Knowledge in Mechanical, Electrical, or Radio Frequency (RF) Engineering is a plus.
3. Working knowledge of TIPQA and/or Costpoint database applications
4. Knowledge in how to read schematics and wirelists is a plus 5. Previous experience working in ISO-certified company
 
Job Number: 9572942
Job Location: Dulles, VA
Rate: 35-40
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 04/08/2020
Last Updated: 04/08/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineering Technician

Description:
An RF Engineering Technician job in Tempe, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering development and production activities such as testing, troubleshooting, and modification down to the circuit level of RF based hybrid electro-mechanical modules and sub-assemblies. To be considered for this role, you will have an Associate's Degree in Electronics Technology or a related technical discipline, plus a minimum of 2 years or related experience. Due to the nature of the work performed in this facility, US citizenship is required.

RF Engineering Technician Job duties:

* Assemble, disassemble, calibrate, fix and repair modules and sub-assemblies.
* Configure RF test setups and perform measurements such as gain, P1dB, noise figure, phase noise, adjacent channel rejection, and isolation.
* Conduct high level RF Tests and create associated documentation.
* Test, tune, and troubleshoot RF electronics to circuit level.

Qualifications:

* Basic electronic test and troubleshooting skills.
* Knowledge of RF test techniques, gain, and noise figure.
* Experience testing and troubleshooting RF amplifiers, LNAs, and Up/Down Converters.
* Familiarity with electronic test equipment spectrum analyzers, network analyzers, signal generators, etc.

If you are interested in this RF Engineering Technician job in Tempe, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297461
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 03/03/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 03/02/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Seeking CREO 4 / Pro-E Design Engineers & Designers

Description:
Seeking CREO / Pro-E Design Engineers & Designers
MUST BE A US CITIZEN
Skilled with Creo 4 in the creation of fully parametric models and drawings is a must!
Associate Degree/Certification with emphasis in engineering drafting/design or an equivalent combination of training and experience; plus a minimum of six additional years drafting and design experience, including a minimum of two years design work. Must be skilled in the creation of model centric models and drawings utilizing Creo 4.
=========================
If qualified, email a WORD version copy of your resume and then call Peggy to discuss at 774-210-4108.
 
Job Number: PL CREO
Job Location: FL, MI, AZ, PA, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ mos.
Start Date: 2 weeks
Input Date: 04/21/2020
Last Updated: 06/05/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer, Hydraulics

Description:
Develop integrated hydraulics solutions for wheeled and tracked vehicle platforms
Work with suppliers towards the development of the subsystems and components for the hydraulics system
Identify subsystem and component requirements, provide direction to analysis teams, and interpret analysis results
Ability to conduct/lead fluid system analysis
Create test plans and actively lead or guide subsystem level testing
Prepare and present information to the IPT on progress and design solutions
Direct and oversee CAD model development and drawings

Position Requirements:
Must have a Bachelor’s Degree in Mechanical Engineering. Master’s degree preferred.
6 years of relevant experience required. Combat vehicle experience preferred.
Established knowledge on hydraulic systems
Experience in CAD and Advanced simulation tools such as Creo, UG-NX, MATLAB-Simulink, FloMaster
Primary office work with Occasional travel to test locations
 
Job Number: 47865
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Bill
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft

Description:
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft - China.


Our Aerospace Client based in China is looking for additional Engineering Support . They require a Senior Mechanical Hydraulic Design and Analysis Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Good salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Our Client's Mechanical Systems team is looking for innovative engineers to join the team in defining and integrating the Hydraulic Systems and components into our current and future

commercial airplane product lines. Their organisation has design, analysis, and certification responsibility for Hydraulic Power system, Hydraulic Conveyance system, Landing Gear and Brake Actuation

systems, Flight Control actuation systems and Systems Control Electronics for all current and future aircraft models.


Position Responsibilities:

  • Work to ensure world-class Hydraulic Systems equipment by collaborating with other organisations such as Aerodynamics
  • Performance and Stability & Control, Structures, Flight Deck Crew Operations, Pilots, Electrical Systems, Systems Stress, Customer
  • Services & Airline Customers, Manufacturing, Flight Line Operations, Supplier Management, Airplane Safety and many others.
  • Developing and validating requirements and interface definitions.
  • Creating new detail design.
  • Conducting various types of analysis and/or simulations, use of CAD systems such as CATIA V5, and math modelling with tools such as Simulink, Matlab, and EASY5.
  • Verifying designs and performance via component, system-level and airplane-level testing.
  • Participate in design reviews and engage in supplier coordination.
  • Participate in activities related to certification of our client's products with regulatory agencies.
Experience and Qualifications:

  • Candidate must possess specialised experience designing mechanical components and assemblies, including latches, hinges, door mechanisms, locks, articulating bracketry, valves, pumps and/or actuators.
  • Degree and typical experience in engineering classification:
  • Bachelor's and 15 or more years' experience, Master's with 12 or more years' experience or PhD with 10 or more years' experience.
  • Bachelor,Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • Working experience with major airframers or major hydraulic components / systems suppliers is preferred.
  • Fluent English, with good communication skills.

 
Job Number: BH-57-2
Job Location: Shanghai, China
Rate: Good Package / Negotiable. 1 - 3 year Fixed Term Contracts
Per Diem: --
Overtime: --
Duration: 1 - 3 years
Start Date: 12/19/2019
Input Date: 12/19/2019
Last Updated: 01/16/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Senior Principal RF Test Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking a Senior Principal RF Test Design Engineer with Secret Clearance in Baltimore / Linthicum Heights, MD.
 
Bachelor’s degree in a technical area with 5 years of experience Designing Fixtures and Automating Lab Instruments
 
Basic Qualifications (Must Meet All):
  • C/C++ Software Programming proficiency
  • Electro-Mechanical Test Fixture Design
  • Familiarity with Lab Test Instruments (scopes, SpecAns, Network Analyzers)

  
  
 
 
  • US Citizen
  • Secret Clearance

 
Job Number: 1910108844
Job Location: Linthicum Heights, MD
Duration: 12 months
Input Date: 11/11/2019
Last Updated: 10/22/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fUChQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Product Engine Engineer- Job ID 38920

Description:
We have an Excellent Contract position for a Senior Product Engine Engineer to join a leading Company located in the Muskegon, MI surrounding area.
** Position requires U.S Citizenship.

Job Responsibilities:
Responsible for the design and development of components and sub-systems of diesel engines, transmissions, and turret drive systems for military ground vehicles.
Projects range in scope from advanced research and development of future products to failure analysis and incremental improvements to existing products.
Responsible for requirements development, concept design, analysis, detailed design, drawings, hardware procurement, supplier technical support, test planning and execution, and failure analysis.

Basic Hiring Criteria:
Bachelor of Science (BS) in Mechanical Engineering from an accredited university required.
A minimum of 5 years of experience as a Product Engineer.

Desired Qualifications:
Demonstrated ability to perform mechanical stress and structural engineering calculations.
Demonstrated ability to perform thermal fluids and heat transfer calculations.
Engine and engine sub-system design and development experience, especially fuel, lubrication, and cooling systems.
Experience designing and developing mechanical and/or hydro-mechanical systems.
MS degree in Mechanical or Aerospace Engineering.
Working knowledge of GD&T.
Creo / Pro-E experience.
Transmission and transmission sub-system design and development experience.
Experience designing and developing components for a military or aerospace contractor.
 
Job Number: 38920
Job Location: Muskegon, MI
Rate: $47.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 12/31/2019
Last Updated: 01/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structures Design Engineer

Description:
Summary
• As the Senior Structures Design Engineer you will report to the Structures Manager and be responsible for contributing to the design and configuration of the primary aircraft structures for a business jet.

On any given day you might:
• Be Responsible for subsystems integration and packaging into primary structure
• Design and configure primary aircraft structures
• Analyze the applicability of new and emerging technologies and advanced techniques
• Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements
• Serve as a design focal between the program and Tier 1 suppliers
• Support technical review of supplier capabilities and progress

We're looking for someone who has:
• A bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area
• 7+ years of experience in performing design of large aerospace primary structures
• Strong composite structural design background
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry
• Knowledge of CATIA V5 and Teamcenter PLM is preferred
• Surfacing skills is preferred
• Experience with Fibersim or equivalent is preferred
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Thorough understanding of the structural design requirements for Part 25 certification is preferred
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets

We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

Let's Build a Company Together
• We're looking for people from scrappy startups, established corporations, and everything in between.
• Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 42-029
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+year
Start Date: ASAP
Input Date: 12/31/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Test Design Engineer

Description:
Use of one or more of the following: National Instruments (NI) TestStand, NI LabWindows/CVI, NI LabView, C/C++ and C#. Experience with various test equipment types including: Power Supplies, Digital I/O, Oscilloscopes, Switch Matrices, DMMs, Counter/Timers, Thermal Controllers, from various manufacturers including Keysight, National Instruments, Ametek, Teradyne, Tektronix, Thermotron, Tenney, and VTI. Ability to troubleshoot and determine root cause of Mechanical, Electrical, and Software problems of Unit Under Test and the interfacing Test Capability.

Knowledge of EO/IR or RF defense system principles, operation, and testing a major plus. Must be a team player and show responsibility for the conduct and performance of assignments. Familiarity with Electrical Engineering hardware interfacing and electromechanical Test Systems is beneficial for this position. Experience with Software Revision Control Process using GIT, JIRA, Tortoise GIT, ClearCase and ClearQuest.

Must Be Secret Clearance Eligible
 
Job Number: 47700
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Engineer Mechanical: Liaison Engineering Electrical 4 - Clearance MD

Description:
166903 Sr. Principal Engineer Mechanical: Liaison Engineering Electrical 4 (Job Number: 19032902)

Number of Openings: 1

Location(s): United States-Maryland-Patuxent River


Shift: 1st Shift

Target Start Date: Feb 3, 2020

Target End Date: Jan 29, 2021

Work week: 4/10 - (12pm - 10:30pm)

Duration: up to 1 year

Location: Pax River, MD

Rate: $62 - $64/hr

Northrop Grumman Aerospace Systems located in Pax River, MD has a contract labor opening for a Sr. Principal Engineer Mechanical: Liaison Engineering Electrical.


Essential Functions:
Liaison/MRB Engineer
· You will be a member of a multi-disciplined team responsible for providing Liaison Engineering support for Triton located at the Northrop Grumman Facility Patuxent River MD
· You will be working with subsystems installations and composite & metallic structures
· You will be performing timely dispositions for nonconforming parts, assemblies, and installations.
· You will be working as part of a Material Review Board (MRB) and Engineering Change Request (ECR) processes.
· You will be working with a team of engineers coordinating with multiple disciplines to determine solutions to problems quickly and efficiently.
· Some of the tools you'll be using are CATIA V5 and TeamCenter.


Basic Qualifications:

•Bachelor’s Degree in STEM (Science, Technology, Engineering and Math) discipline from accredited institution along with 9 years' minimum experience; minimum 7 Years with Masters; 4 Years with PhD.
•Current or previous Material Review Board (MRB) signature authority
•Experience with ECR (Engineering Change Request) process
•Current or previous Liaison Engineering Authority for ECR's
Experience with CATIA V5 and/or TeamCenter
 
Job Number: JK-1823S
Job Location: Patuxent River, MD
Rate: 64/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 12/13/2019
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Mechanical Engineer - Clearance GA

Description:
Sr. Principal Mechanical Engineer (Job Number: 19032956)

Number of Openings: 1

Location(s): United States-Georgia-Warner Robins


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Jun 19, 2020

Pay Rate: $57 to $60/hr

Work Schedule: 9/80

Duration of Assignment: Approx 3 to 6 months


This position is located at Warner Robins Air Force Base, Georgia.
This position supports the existing Government program and engineering teams at RAFB as well as Melbourne, FL. Duties to include the review, assessment and update of aircraft maintenance and structural requirements and technical data for sustainment. Development of bill of materials and repair concepts required to accomplish heavy maintenance is required. Experience in the resolution of aging aircraft issues is preferred. Technical support and advisory of Government counterparts is a primary objective of this position. The demonstrated ability to work closely with Government counterparts is required.

Basic Qualifications:

Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 9 years of experience in design, fabrication or repair of metallic airframe structures.
An active DoD Interim Secret Clearance required to start.


Preferred Qualifications:

BS or MS, Mechanical or Aerospace Engineering
Experience with programmed depot maintenance (PDM) for aging military aircraft
Liaison Engineering Experience.
Excellent verbal and written communication skill
Ability to collaborate in a team environment
Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
Ability to comprehend and analyze complex problems and develop solutions
Experience with military specs and standards.
Experience interfacing with a military customer
 
Job Number: JK-1815S
Job Location: Warner Robins AFB, GA
Rate: 60/hr max
Per Diem: pd split possible
Duration: 8 months
Input Date: 10/17/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com