Job Search Results

410 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/11/23 Thursday 04:03PM Pacific Time by ContractJobHunter. )

Listings 1 - 410

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

A&P Mechanics - 1st Shift

Description:
PDS TECH is looking for A&P Mechanics - 1st shift in Long Beach, CA.

If interested and available - Call 800-234-8644 x 20210
Send resume to: KPelonis@pdstech.com


Position Purpose:

Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.  Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 


Call 800-234-8644 for consideration.

Principal Duties and Responsibilities
Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. 7. Operate and supervise use of special support equipment used in removal and installations of major components.
8. Coordinate movement of aircraft as required. 8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Duties:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned. 

Other Requirements: 1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. 2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.) 4. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
Call 800-234-8644 and/or send your resume to aviationjobs@pdstech.com for consideration.PDS Tech, Inc. is proud to bean Equal Opportunity Employer -Minorities/Female/Disabled/Veteran (EOE M/F/D/V)Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.We offer a full range of benefits including:- Health insurance- Paid holidays- Weekly payroll- Immediate 401(k) eligibility- Completion bonuses- TrainingPlease note availability of benefitsmay vary by position.PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few. Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand. For more information about PDS, please check our website, www.pdstech.com$$$ PDS pays for referrals! $$$We pay thousands each month in referral bonuses!Contact a recruiter for details.To find a branch near you, look at our Branch LocatorThis position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination. PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests.
 
Job Number: 1710068817
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 6 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JryoAAC&URLSource=cjhunter

Acceptance Technician - Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Acceptance Technician Secret Clearance position located in Dallas, TX.  
Performs a wide variety of technical tasks in support of processes, engineering, quality control, calibration, laboratories, production/test environment, line maintenance and/or chemical handling.
Tests, troubleshoots, repairs, maintains and installs a variety of electronic, electromechanical, and mechanical, computer, laboratory and scientific systems and/or equipment.
May assist in the development of procedures. Selects, sets up and operates engineering and scientific equipment.
Observes, analyzes and reports test data; and when appropriate makes necessary repairs to equipment.
Utilizes various engineering and scientific drawings, manuals and other related documentation in the performance of their tasks.
May include configuration/data management.
Checks for work correctness.
May assist in directing work, assigning and outlining tasks.
Candidate will also be responsible for training/mentoring junior test technicians. 
 
Required Skills:
• Candidate must have 4 years experience in electronics industry or equivalent military electronics experience
• Ability to work directly from approved procedures, schematics, and verbal instructions
• Ability to troubleshoot electronic circuits to component level and effectively identify failure trends
• Ability to isolate problems between the test environment (test station, interface adapter, test cables, etc.) and the units under test and resolve as necessary
• Select appropriate test equipment and configure it based on test specification
• Able to communicate technical issues by generating comprehensive failure entries which correlate failure modes back to the associated test specification(s)
• Ability to interpret test data (plots, graphs, tabulated parameters, etc.) to determine pass/fail condition and determine when further analysis is needed
• Must work well in a team environment
• Candidate must be experienced in the use of computers and software applications (both desktop and technical).
Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with other test equipment
• Lifting up to 25lbs, walking, and could involve stair/ladder climbing at the test range(s)
• Candidate must be willing to work second or third shift
• Candidate must have an active Secret Clearance

Desired Skills:
• Radar or Electronic Warfare (EW) systems knowledge
• Direct experience with Radar System and subsystem (Transmitter, Receiver, Antenna, Signal/Data Processor, Power Supply, etc.) evaluation
• Ability to work in a fast-paced manufacturing/production test environment.

Required Education:
Associates Degree in Electronics Science, Military Electronics training or direct experience in testing and troubleshooting of Radar systems
 
Job Number: 1710072910
Job Location: Dallas, TX
Duration: 18 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EXqAAM&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech, Inc. is seeking a Administrative Assistant 2 for an open position in Windsor Locks, CT.
Key responsibilities of the role include:

  • Maintain calendar and schedule appointments.
  • Plan and arrange domestic and international travel.
  • Prepare and submit travel and mileage expense reports for reimbursement and coordinate corporate Visa reconciliation.
  • Prepare meeting agendas and materials, take and transcribe minutes, maintain records.
  • Electronic file and Share-point site maintenance, data and paperwork processing, collecting/communicating business information from internal/external sources, and production of correspondence and recurring reports.
  • Management of workflows for purchase orders, IT, and facility access
  • Support for special projects as required. Preferred candidate will have:
  • Demonstrated experience as an administrative and/or personal assistant at the senior management level.
  • Demonstrated reliability and proficiency in multi-tasking in a fast-paced office environment.
  • Professional attitude and broad familiarity with executive-level support requirements and expectations.
  • Excellent written and oral communications skills.
  • Experience in handling and safeguarding sensitive and confidential information.
  • Ability to quickly develop constructive relationships.
  • Must be a self-starter who can organize and prioritize work and meet deliverables.
  • Strong computer skills including experience with Microsoft Office Programs: Outlook, Excel, PowerPoint, Word, SharePoint, etc.
  • Strong PowerPoint/Excel presentation preparation skills desired Excellent teaming skills.

  • Education AA/AS degree or relevant experience, Technical/Business School Certificate or Diploma, Skilled Trades Apprenticeship, or other post high school training (two years duration). Experience 3-5 years related experience

 
Job Number: 1710074683
Job Location: Windsor Locks, CT
Duration: 14 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023JeNAAU&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech, Inc. is seeking an Administrative Assistant 2 for an open position in Orlando, FL.
In your role, you will:

The Learning Administrator supports the Learning Campus (LC) US Organization initiatives by coordinating and administering courses, programs and corresponding logistics.
This role works closely with the Learning Partners (Program Managers), Project Managers and Program Facilitators and other vendors to understand course requirements to ensure that programs and offerings are properly planned, created in appropriate learning management system (LMS), managed, executed, and closed appropriately.
Learning Administrators also provide on-site support for courses and programs held at their respective location.
Being accessible and a team player are essential to this role with ability to be flexible and work independently.
This is a very fast-paced environment where ingenuity and customer/team collaboration are valued. 

General duties: 
Supports in organizing and maintaining office supplies/files both physical and electronic.
Schedules resources such as people, meetings, appointments, rooms, and equipment; take calls, emails, case and order inquiries, responds to questions, and escalations.
Ability to prioritize and plan multiple tasks for simultaneous projects is key. 

Drafts and edits semi-complex email messages, templates and other correspondence.
Participates in the preparation of reports, spreadsheets and other documentation as required to customers.
Responsible for accurate input and maintenance of course data in learning management systems as well as extracting database information from multiple technological platforms. Willingness to understand and be passionate about the end-to-end learning experience for employees.
MUST have capacity to support Large Volume of course logistics with all associated tasks and activities within the established deadlines and budget.
MUST have MS Office proficiency.
Read/write French is a PLUS. 

Acts as back up support to other Learning Administrators during absence or vacation periods. 
Specific duties: 
Establishing courses in multiple LMS (Learning Management Systems) 
Monitoring course registration and follow up as needed; 
Coordination of external facilitators and internal support; 
Manage both facilitator and ongoing learner correspondence; 
Booking of course venue and coordination (with point of contact) for all program logistics; 
Coordinate catering (on and off-site) as well as course materials management; 
Organizing technical support as required; 
On-site program support as necessary (i.e. classroom setup, assisting with requests during course, managing the venue setup/cleanup); 
Manage off-site logistics with hosting divisional contact, coordinate internal support; 
Respond to customer/learner inquiries regarding class availability and registration/cancellation process; 
Close courses after completion - update learner records as needed and budget documents; 
Participate in annual course planning sessions with Learning partners team members. 
Finance/Accounting Support (billing procedures, PO creation, invoice audits and submissions, reconciliation of course expenses) 
Case & Order gatekeeper and/or support for incoming customer inquiries; 
Procurement - support purchase of class supplies via OneSRM portal and print materials with Siemens vendors. 
Reporting requirements - in support of scheduled and ad hoc requests for essential course/participant data 

Other support duties to be assigned as identified by the Learning Services Team Lead or Program Manager.
 
Job Number: 1710064658
Job Location: Orlando, FL
Per Diem: No
Duration: 7 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021NMHAA2&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech is seeking an Administrative Assistant for an open position in Roosevelt, Wa. 
In your role, you will: 

  • The Field Administrative Support (FAS) person will assist the site with warehouse logistics and administrative tasks.
  • This includes organizing and maintaining a warehouse, shipping and receiving, documentation review, electronic and physical filing, reporting, compliance paperwork, tool and parts management, facility organization and paperwork reviews. 

  • This position will require forklift operations and prior experience is preferred but not required.
  • This is an ideal position for someone who can operate independently and is a highly motivated self-starter that has an attention to detail.
  • Significant computer work with e-mail, Microsoft Office and SAP is part of the normal working environment.
  • Candidates must be able to work on their feet for long periods and regularly lift 50 pounds.

 
Job Number: 1610048928
Job Location: Roosevelt, WA
Per Diem: No
Duration: 11 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001yV4vAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Seeking an Aeronautical Engineer-N for an opening in Palmdale, CA.

RESPONSIBILITIES:
Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

REQUIRED EXPERIENCE:
Hardware and software integration experience. Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test. C or C++ programming experience. Experience with serial buses.

EDUCATION:
B.S. Degree or above in an Engineering Discipline Several years of laboratory experience

WORK HOURS:

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 165578
Job Location: Palmdale, CA
Duration: 6 Months
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 10/30/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aeronautical Engineer- Secret

Description:
PDS Tech, Inc. is seeking a Aeronautical Engineer for an open position in Palmdale, CA.
Job Description: 

  • Candidate will be responsible for designing and building a system integration laboratory (SIL).
  • This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts.
  • Candidate will have hands-on hardware experience and software skills.
  • Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test.
  • Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems.
  • Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements.
  • The candidate will support system/software verification and validation effort and customer reviews during all phases of system development.
  • The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews.
  • Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment.
  • Complex organization and documentation skills are required. 



 
Mandatory Skills:
  • Final Secret Clearance. Hardware and software integration experience.
  • Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test. C or C++ programming experience.
  • Experience with serial buses. 



Desired Skills:

  • B.S. Degree or above in an Engineering Discipline Several years of laboratory experience 





 
 
Job Number: 1710074681
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Je8AAE&URLSource=cjhunter

Aeronautical Engineer-N - CA - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer-N for an opening in Palmdale, CA.

RESPONSIBILITIES:
Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

REQUIRED EXPERIENCE:
Hardware and software integration experience. Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test. C or C++ programming experience. Experience with serial buses.

EDUCATION:
B.S. Degree or above in an Engineering Discipline Several years of laboratory experience

WORK HOURS:

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165578
Job Location: Palmdale, CA
Rate: $65 to $75.00 DOE
Duration: Temp
Input Date: 11/23/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: daubert@chiptonross.com
Website: www.chiptonross.com

Apprentice Avionics Harness Technician - (6) - CA

Description:
Chipton-Ross is seeking a Apprentice Avionics Harness Technician for an opening in Hawthorne, CA.

RESPONSIBILITIES:
As an Avionics Harness Technician you will be responsible for fabricating and assembling high quality/high reliability wire harnesses and electro-mechanical assemblies under the instruction of a seasoned Technician. This is a great opportunity to learn more about Avionics for individuals with a strong mechanical aptitude and a passion for working with their hands.
Read, interpret and work from drawings, controlled documentation and processes. Self-monitor work progress against area benchmarks to achieve on time product delivery. Record work performed on shop floor management system (ERP). Perform verification of flight hardware and document results in a clear, precise and complete manner. Assist with area efficiency improvement projects.


REQUIRED EXPERIENCE:
High School Diploma or Equivalent. At least 5 years experience using basic mechanical and/or electronics hand tools. Associates Degree or Technical Certification. Experience working and collaborating in a team environment. Experience preferred in fast-paced production environment with flight quality hardware. Excellent communication (written and verbal) and teamwork skills. Excellent concentration and attention to detail with outstanding work efficiency and accuracy. Participation in STEM (Science, Technology, Engineering and Mathematics) related activities, clubs or groups. Computer literate.
Must be willing to work 1st shift, 7:00 AM 5:30 PM. Must be willing to work overtime and weekends as needed. Must be able to lift and carry up to 40 pounds. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position.

EDUCATION:
High School Diploma

WORK HOURS:
-5/50, 1st Shift: 7:00AM - 5:00PM
 
Job Number: 161967
Job Location: Hawthorne, CA
Rate: $DOE
Duration: 3 Months
Input Date: 11/23/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Assembler - Level 4

Description:
PDS Tech is seeking an Assembler for an open position in Clearwater, FL 

In your role, you will:

    The Assembler / Wire personnel must perform duties to ensure effective wiring and assembly of standard and non standard products
    As our ideal candidate, you will meet the following requirements: 
    • Basic Qualifications: 

      - Due to government regulations, must be a US Citizen 

      - High School Diploma or GED 

      - 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
      •   Wire harness soldering experience with extensive use under microscope. 

    • IPC-7711/7721 IPC Certification Training 

      IPC/WHMA-A-620 Certification Training 



      Additional Qualifications: 

      - Working knowledge of computers strongly desired 

      - Ability to work with “fine pitch” components & detail chassis wiring. 

      - Position requires the completion of 40hr solder & ESD training certification class. 

      - Experience in Space & Defense manufacturing environment. 

      - Individual is expected to have good verbal and written communications skills. 

      - Candidate must be able to work in a self directed, teaming & continuous improvement environment. 

      - Self-directed teaming skills 

      - Good written & verbal communication skills 

      - Continuous Improvement skills (6-Sigma); greenbelt is a plus 

      - Good Team Player 



     
     
    Job Number: 1610059883
    Job Location: Clearwater, FL
    Duration: 8 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FscDAAS&URLSource=cjhunter

    Assembler Sr

    Description:
    PDS Tech, Inc. is seeking a candidate for the Assembler Sr. position located in Marion, MA.
    Job Description: 

    • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
    • Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
    • Makes continuity checks on work in process and completed.
    • May conduct quality inspections on processing line in accordance with quality specifications.
    • May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.


     
    Mandatory Skills:
    • Ability to read/comprehend MEI’s, PWI’s and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.
    • Strong soldering ability and working knowledge of IPC 610 workmanship standards and component identification.



    Desired Skills:

    • J Standard Soldering certification
    • IPC 610 Acceptability of Electronic assemblies certification 2years experience
    • Ability to read/comprehend documentation written in English Good communication skills.
    • Ability to learn and follow written instructions.
    • IPC-620 Certification

     
    Job Number: 1710075223
    Job Location: Marion, MA
    Duration: 10 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023KzKAAU&URLSource=cjhunter

    Assembler/Integrator

    Description:
    PDS Tech is seeking a candidate for the Assembler/Integrator position located in Madison, AL.  
    The successful candidate will be required to perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
    Additional duties will include printing labels required for unit identification, serialization, revision level, and cage code information.
    Experience with Bartender label printing software (or similar), Intermec and Rayjet laser printers desired.
    Some knowledge of Microsoft Office Suite programs. 
    May conduct quality inspections on the production line in accordance with quality specifications.
    May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications including bills of material and work instructions. Experience working from drawings and diagrams. 

    Basic Requirements:
    • Must be a team player
    • Strong interpersonal skills.
    • Must be able to work in a fast paced environment.
    • Must have strong communication skills 

    *# of Years Experience 2 years additional education and/or experience 
      
    *Educational Requirements:  High School 
      
    *Please specify any Other Details/Requirements for this position: US CITIZENSHIP IS REQUIRED 
     
    Job Number: 1710067532
    Job Location: Madison, AL
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000012RlqAAE&URLSource=cjhunter

    Assembler/Tester - Camarillo, CA

    Description:
    PDS TECH, INC is currently looking for an Assembly/Tester for our client in Camarillo, CA.

    Job Description:
    Accurately and efficiently assembles/tests a variety of moderate to semi-complex products to achieve customer quality and on-time delivery schedules. May perform lockwiring and final detailing functions. Works on products that contain mostly mechanical and some electrical components, single and some dual hydraulic systems, and multiple part families. Actively contributes to lean initiatives to increase productivity and reduce costs. Receives limited supervisory guidance.Should have a good knowledge of hydraulic systems and components. Aviation or Aerospace background/experience is highly preferred.

    Job Duties:
    1. Five or more years direct industry related experience in assembly/test in a high-technology manufacturing environment.
    2. Demonstrate understanding of semi-complex products involving electronics, dual systems, and multiple part families.
    3. Demonstrate product and process knowledge by applying it to newly learned techniques.
    4. Able to research problems and develop solutions, incorporating multiple variables, to successfully repair product to serviceable condition.
    5. Able to work with limited supervisory guidance. Familiar with and able to set up most test fixtures.
    6. Able to adapt to procedures, techniques, and/or processes to meet special needs on varied assignments.
    7. Proficient in reading and understanding blueprints, route sheets, and test specifications. Perform semi-complex mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills.
    8. Strong mechanical reasoning, as well as hydraulic and/or electrical background required. Measurement conversion and fluids theory knowledge required for test applications. Leakage, flow, friction, and pressure knowledge required.
    9. Able to implement and effectively apply lean initiatives.
    10. Serve as a resource to other team members and assist in training efforts. Possess effective interpersonal communication skills, as well as the abilityh to work in a team environment on research and solution development.
    11. Able to interpret reports and use standard business software applications. Able to use employee self-service to access on-line information and use specialized automated systems (i.e. PMR, TORS, e-mail).
    12. May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).
    13. May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).
    14. Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.
    PDS Tech, Inc. is proud to bean Equal Opportunity Employer -Minorities/Female/Disabled/Veteran (EOE M/F/D/V)Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.We offer a full range of benefits including:- Health insurance- Paid holidays- Weekly payroll- Immediate 401(k) eligibility- Completion bonuses- Training Please note availability of benefits may vary by position. PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few. Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand. For more information about PDS, please check our website, www.pdstech.com $$$ PDS pays for referrals! $$$We pay thousands each month in referral bonuses!Contact a recruiter for details.To find a branch near you, look at our Branch Locator This position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination. PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests.
     
    Job Number: 1710068895
    Job Location: Camarillo, CA
    Duration: 0 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JsgyAAC&URLSource=cjhunter

    Assembler/Tester B- AZ

    Description:
    Chipton-Ross is seeking an Assembler/Tester B for an opening in Glendale, AZ.

    How rate is determined:
    Entry-level - less than 5 years A&T experience will be between $13-$13.50 (as we currently are doing).
    More than 5 years A&T experience will be $15.50.


    RESPONSIBILITIES:
    Accurately and efficiently assembles/tests products to achieve customer quality and on-time delivery schedules. May perform lockwiring, first stage subassembly, and final detailing functions on routine assignments requiring limited judgement. Actively contributes to lean initiatives to increase productivity and reduce costs. Receives direct supervisory guidance. Duties and Responsibilities:
    1. Performs basic assembly/test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment.
    2. Records test results on data forms using basic electrical equipment and flow meters.
    3. Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.
    4. Produces and inspects assemblies that conform to product specifications. Assembles/tests to customer and/or industry standards.
    5. Performs touch-up or full surface painting of parts with finishing materials such as paint, lacquer, glaze etc. Mixes paint and cleans parts.
    6. Actively participates in lean initiatives by identifying and providing suggestions on areas for improvement. 7. Observes all safety rules and maintains a foreign object damage (FOD) free work area.
    8. Ensures all equipment is calibrated in accordance with calibration schedule.

    REQUIRED EXPERIENCE:
    o Mechanically apt. experience working on small cars, small engines, lawnmowers, putting together Legos, really anyone that likes to work with their hands.
    o Personality - people who want to work for client - looking for steady employment, good work environment, opportunities to move up.
    o Attitude - looking for individuals with a good positive attitude - upbeat and willing to learn.
    o Reliable - individuals who can come to work on time and be here each day.

    EDUCATION:
    Accredited High School or equivalent.

    WORK HOURS:
    3rd Shift, Full-Time
    11:00 PM - 07:30 AM

     
    Job Number: 165239
    Job Location: Glendale, AZ
    Rate: $13 to $16.00 DOE
    Duration: 6-12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Brent Sizemore
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bsizemore@chiptonross.com
    Website: www.chiptonross.com

    Assembler- MA

    Description:
    Chipton Ross is seeking an Assembler in Marion, MA

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Mandatory:
    Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

    Desired:
    Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
     
    Job Number: 160418
    Job Location: Marion, MA
    Rate: $15 to $17.00 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembly Mechanic - Aerospace (KS)

    Description:
    Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

    Duties:
    The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
    1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
    2. Complete required data gathering transactions to facilitate assembly progression.
    3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
    4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
    5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
    6. Use precision measuring instruments required to accomplish work assignments.
    7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
    8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
    9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
    10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
    11. Document any discrepancies according to specification, process, and procedure.
    12. Cross trains in inspection and becomes SIA qualified.

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
    • Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
    • Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
    • Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
    • Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    • Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
    Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
    • Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
    Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

    Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter’s (MTGR’s), Brotje’s , C-Frames, IPAC’s etc., to assemble components in accordance with engineering specifications.

    Requirements:
    ALL SUBMISSIONS MUST HAVE HAD TO WORK IN ANY OF THE FOLLOWING CAPACITIES:

    With Client Direct (Wichita and/or Tulsa)
    -or-
    With Client Contract (Wichita and/or Tulsa)

    Client ID numbers will need to be provided at the top of resumes along with their Rehire Eligibility information

    'Travel work' is what's needed e.g. Contractors will work in the 737 fuselage area and 'traveling' throughout the line to resolve/fix issues/rework so existing Spirit Employees can focus on their own assembly work.

    MUST HAVE AT LEAST 3 YEARS' EXPERIENCE IN AIRCRAFT ASSEMBLY
    Level C - Assembly Mechanics
    Must have structural riveting, sealing and wiring experience.

    Much have the skill and knowledge to perform in all of the general functions of Assembly Mechanic:

    Assembly/Installation Structures
    Sub Assembly
    Sealer

    Each of the functional areas described below:

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

    Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures

    Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    Assembly / Installation Doors - Pre- assemble, trim, fit, rig, seal, align, and adjust aircraft door systems.
     
    Job Number: FD-551987KS
    Job Location: Wichita, KS
    Rate: $30.00/HR
    Per Diem: $110.00/WKLY (if applicable)
    Overtime: Yes - Possible
    Duration: 90-days - (3 months)
    Start Date: 10/13/2017
    Input Date: 10/10/2017
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    Assembly Tech II

    Description:
    PDS Tech is currently needing Assembly Technicians swing shift in Chandler, AZ.  Please reach out to Jonas Lindner at:  480.212.0845 or jlindner@pdstech.com

    Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.  Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.  Makes setups and adjustments holding tolerances to blueprint specs.
    Performs specific back-end semiconductor mfg. functions in the production of semiconductor devices.  Operates various equipment in performing functions such as wafer scribe and break, die sort, die attach, lead bonding and seal, test, or mark and pack.
    • Build mechanical assemblies and sub-assembles
    • Must be able to read pneumatic and electrical schematics
    • Responsible for helium leak testing, cabling, module and sub-assembly testing
    • Operates hand and power tools to complete assemblies
    • Reads and interprets work instructions to ensure accuracy of work performed.
    • Interacts with mgmt. and team members to encourage effective communications on production floor
    • Performs standard testing and minor troubleshooting
    • Ensures quality standards are met throughout all steps of the assembly process
    • Attendance is essential
    • Knowledge of operating hand tools, portable power tools and bench tools
    • Strong attention to detail, quality focused and willing to learn
    • Excellent communication skills
    • Basic computer skills and the ability to operate computer terminals
    • 3 plus years experience in mfg./cleanroom environment
    • Performs other duties as required.


     

     
    Job Number: 1710069740
    Job Location: Chandler, AZ
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jonas Lindner
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnlhAAC&URLSource=cjhunter

    Assembly Technician- Electrical Integration

    Description:
    PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
    In your role, you will:
    *** 
    Need to be able to perform Wire harness assembly integration, install instrumentation including Strain Gauges
    • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
    • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
    • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
    • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
    • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
    • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
    • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
    • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
    • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
    • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
    • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
    • Troubleshoot, fault isolate and document nonconformances.
    • Perform related rework and approved repair necessary to accomplish assignments
    • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
    • Perform self examination and inspection as certified and required.
    • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
    • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
    • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
    • Set up and maintain charts, logs, records and reports.
    • Maintain licenses, permits and certifications required to perform assigned work.
    • Perform other duties as assigned within the general job classification
    • Maintain a safe clean and orderly work area.

    High School Diploma or GED
     
    Job Number: 1710072532
    Job Location: Huntsville, AL
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B8GAAU&URLSource=cjhunter

    Assembly Worker

    Description:
    PDS Tech, Inc. is seeking a Assemble Worker for an open position in Hudson, IL.
    Department: Assembly 
    Essential Duties and Responsibilities; 

    • Gather parts for putting assemblies together per shop order 
    • Complete mechanical and electrical assemblies and sub-assemblies using hand tools and electronic and pneumatic tooling 
    • Use scanner to pull parts for assembling 
    • Report defective materials and any shortages of parts to supervisor 
    • Maintain the work area in a clean and orderly condition and follows prescribed safety regulations 
    • Complete tasks as directed by supervisor and by manufacturing schedule 
    • May perform other duties or work at different workstations per production needs 
    Education and Experience; 
    • High school education or GED and 1 year of related factory experience 
    • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. 
    • 1 year forklift experience required 

    Job Knowledge, Skills and Competencies; 
    • Ability to work effectively with different people and teams of people by putting others at ease 
    • Cooperating with others and working towards consensual solutions to achieve the teams objectives 
    • Able to identify and set priorities, plan and effectively allocate appropriate resources 
    • Ability to work well under pressure or opposition, while maintaining effectiveness and self control 
    • Ability to be willing to take action to address needs without being requested to do so 
    • Must be able to read blue prints 
    • 6 months experience with use of impact tools required 
    • Proven knowledge of torque requirements and use of jigs & fixtures required 
    • Ability to use scanners 
    • Familiar with hardware 
    • Responsible for wearing required PPE and being safety conscious 
    • Teamwork is a must 

    Physical Demands 
    • Regularly required to push, pull, lift, stand, bend and reach 
    • Ability to work in hot/cold environment 
    • Lifting of up to 50 pounds 
    • Employees may be subject to random drug and alcohol testing 
     
    Job Number: 1710074086
    Job Location: Hudson, IL
    Duration: 3 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Janelie Pizzetulla
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HoxAAE&URLSource=cjhunter

    Avionics

    Description:
    PDS Tech, Inc. is seeking a Avionics for an open position in Shelton, CT.
    Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost. 

    Position Roles & Responsibilities: 
    • Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details. 
    • Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA. 
    • Work closely with various design groups to coordinate designs and establish aircraft interfaces. 
    • Work closely with aircraft final assembly shop personnel. 
    • Work closely with various suppliers. 

    Experience Required: 
    • Minimum of a BS in Engineering Design required 
    • High level communications skills both written and oral. 
    • In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality. 
    • Experience with Catia V5 Tubing function. 

     
    Job Number: 1710074771
    Job Location: Shelton, CT
    Duration: 20 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Roger Greco
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Jo3AAE&URLSource=cjhunter

    Avionics / Elec Techs

    Description:

     PDS TECH INC is currently looking for an Avionics Techs for our Long Beach customer.


    If you are interested and available, please call 1-800-234-8644 x 20210
    Send resume to: KPelonis@pdstech.com


    Education and Experience Requirements:


    High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
    Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


    Position Purpose:



    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    10. Adapt to sudden schedule changes. 

    Additional Functions:
    1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    2. Performs other duties as assigned. 

    Other Requirements:
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




     



     



     
    Job Number: 1710075181
    Job Location: Long Beach, CA
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Kv8AAE&URLSource=cjhunter

    Avionics / Elec Techs

    Description:

     PDS TECH INC is currently looking for 4 Avionics Techs for our Long Beach customer.
    2 on 1st shift and 2 on 2nd shift

    If you are interested and available, please call 1-800-234-8644 x 20210
    Send resume to: KPelonis@pdstech.com


    Education and Experience Requirements:


    High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
    Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


    Position Purpose:



    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    10. Adapt to sudden schedule changes. 

    Additional Functions:
    1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    2. Performs other duties as assigned. 

    Other Requirements:
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




     



     



     
    Job Number: 1710067142
    Job Location: Long Beach, CA
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mnUAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Position Roles & Responsibilities:
    - Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
    - Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.
    - Work closely with various design groups to coordinate designs and establish aircraft interfaces.
    - Work closely with aircraft final assembly shop personnel.
    - Work closely with various suppliers.

    Experience Required:
    - Minimum of a BS in Engineering Design required
    - High level communications skills both written and oral.
    - In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
    - Experience with Catia V5 Tubing function.
     
    Job Number: CT1819
    Job Location: Stratford, CT
    Rate: 62.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 15 months
    Input Date: 10/04/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    A leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer - Avionics, for a 8+ month contract role.

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    -Support Electro-Mechanical Packaging of complex electrical/electronic assemblies required.
    -Extensive experience in Creo design required.
    -Candidate must have strong GD&T and tolerance analysis skills required.
    -Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
    -Experience in design of cables and harnesses for applications for Aerospace products.
    -Proficiency in use of Creo PDM/Link and Windchill.
    -Proficiency in generating drawings is required.

    Skills:
    -Electronic-Mechanical Packaging Design a must.
    -ProE/Creo CAD design a must.
    -GD&T a must.
    -Electronic packaging design for harsh environments.
    -Design of cables and harnesses.
    -Drawing Generation.
    -Tolerance Stack-up analysis.
    -Creo PDM/Link and Windchill.

    Education:
    -BSME with 10 years of experience or 15 + years of equivalent experience.
     
    Job Number: 12241
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 8 Months+
    Start Date: October
    Input Date: 10/30/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Hydraulic/Mechanical Flight Controls

    Description:
    Overview:
    Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Position Roles & Responsibilities:
    - Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
    - Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

    - Work closely with various design groups to coordinate designs and establish aircraft interfaces.
    - Work closely with aircraft final assembly shop personnel.
    - Work closely with various suppliers.

    Experience Required:
    - Minimum of a BS in Engineering Design required
    - High level communications skills both written and oral.
    - In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
    - Experience with Catia V5 Tubing function.
     
    Job Number: SIK1819
    Job Location: Shelton, CT
    Rate: 31.00/HR
    Per Diem: 1,240/week
    Overtime: Some
    Duration: 18 months
    Start Date: ASAP
    Input Date: 10/12/2017
    Firm Name: NESC STAFFING
    Attention: Brad McInnis
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    Avionics Installer

    Description:
    Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.
     
    Essential Functions:
    1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings.
    2. Maintains required logs and records.
    3. Completes tasks within allotted time frame.
    4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
    5. Checks all work and ensures a defective free assembly prior to final inspection.
    6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    7. Maintains a neat and orderly work area.
     
    Additional Functions:
    1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
    2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
    3. Performs other duties as assigned.
     
    Education and Experience Requirements:
    High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications.
    Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience.
    Ability to read and interpret basic blueprints and schematic diagrams.
    2nd Shift
     
     
    Job Number: 1710073184
    Job Location: Westfield, MA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FeeAAE&URLSource=cjhunter

    Avionics Installer I

    Description:
    PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

    Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

    Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 
     

    Education and Experience Requirements: 
    High School diploma/GED. General knowledge of applicable regulatory requirements and customer specifications.
    Must know how to use a multimeter.
    Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.

    Other Requirements:
    1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Strong written and verbal skills required.
    4. Computer skills and general software knowledge necessary.

    POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 


     
    Job Number: 1710074182
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023I9zAAE&URLSource=cjhunter

    Avionics Installer- 1st shift

    Description:





    PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

    If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

     



    Avionics installation or maintenance history required. Computer literate required. 



    Education and Experience Requirements:



    High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


    Position Purpose:



    Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
    3. Completes tasks within allotted time frame.
    4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
    5. Checks all work and ensures a defective free assembly prior to final inspection.
    6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    7. Maintains a neat and orderly work area. 

    Additional Functions:
    1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
    2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
    3. Performs other duties as assigned. 

    Other Requirements:
    1. Strong written and verbal skills required.
    2. Computer skills and general software knowledge necessary.





     





     
    Job Number: 1710072940
    Job Location: Long Beach, CA
    Per Diem: Yes
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EakAAE&URLSource=cjhunter

    Avionics Installer- 1st shift

    Description:





    PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

    If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

     



    Avionics installation or maintenance history required. Computer literate required. 



    Education and Experience Requirements:



    High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


    Position Purpose:



    Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
    3. Completes tasks within allotted time frame.
    4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
    5. Checks all work and ensures a defective free assembly prior to final inspection.
    6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    7. Maintains a neat and orderly work area. 

    Additional Functions:
    1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
    2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
    3. Performs other duties as assigned. 

    Other Requirements:
    1. Strong written and verbal skills required.
    2. Computer skills and general software knowledge necessary.





     





     
    Job Number: 1710072938
    Job Location: Long Beach, CA
    Per Diem: Yes
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EaaAAE&URLSource=cjhunter

    Avionics Installer- 2nd shift

    Description:





    PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

    If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

     



    Avionics installation or maintenance history required. Computer literate required. 



    Education and Experience Requirements:



    High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


    Position Purpose:



    Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
    3. Completes tasks within allotted time frame.
    4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
    5. Checks all work and ensures a defective free assembly prior to final inspection.
    6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    7. Maintains a neat and orderly work area. 

    Additional Functions:
    1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
    2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
    3. Performs other duties as assigned. 

    Other Requirements:
    1. Strong written and verbal skills required.
    2. Computer skills and general software knowledge necessary.





     





     
    Job Number: 1710073124
    Job Location: Long Beach, CA
    Per Diem: Yes
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

    Avionics UT-ENG-3104MST

    Description:
    DESCRIPTION
    Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    POSITION ROLES & RESPONSIBILITIES
    - Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
    - Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

    - Work closely with various design groups to coordinate designs and establish aircraft interfaces.
    - Work closely with aircraft final assembly shop personnel.
    - Work closely with various suppliers.

    EXPERIENCE REQUIRED
    - Minimum of a BS in Engineering Design required
    - High level communications skills both written and oral.
    - In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
    - Experience with Catia V5 Tubing function.
     
    Job Number: 17-796-1819
    Job Location: Northeast
    Rate: OPEN
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/15/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Email: abui@agentetech.com
    Website: www.agentetech.com

    Avionics/Electrical Technician

    Description:
    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

    Essential Functions:
    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    10. Adapt to sudden schedule changes.
     
    Education and Experience Requirements:
    High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
     
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
     
     
    Job Number: 1710073186
    Job Location: Westfield, MA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FetAAE&URLSource=cjhunter

    Avionics/Electrical Technician

    Description:
    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

    Essential Functions:
    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    10. Adapt to sudden schedule changes.
     
    Education and Experience Requirements:
    High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
     
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
     
     
    Job Number: 1710073185
    Job Location: Westfield, MA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FejAAE&URLSource=cjhunter

    Avionics/Electrical Technician - 2nd shift

    Description:




    PDS TECH INC is currently looking for Avionics/Electrical Technician for our customer in Long Beach

    If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com


     

    Education and Experience Requirements:



    High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


    Position Purpose:



    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    10. Adapt to sudden schedule changes. 

    Additional Functions:
    1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    2. Performs other duties as assigned. 

    Other Requirements:
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.



     



     




     





     
    Job Number: 1710072944
    Job Location: Long Beach, CA
    Per Diem: Yes
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EbOAAU&URLSource=cjhunter

    Buyer - FL

    Description:
    Chipton-Ross is seeking a Buyer for an opening in Naples, FL.

    RESPONSIBILITIES:
    Obtains the best quality, service, and value for products and services through effective bidding, negotiation, and supplier management. Identifies manufacturing needs, identifies and selects suppliers, initiates purchase orders, and arranges for delivery. Provides parts, equipment, services, and materials of limited scope and complexity.

    REQUIRED EXPERIENCE:
    2. May have limited prior industry experience or worked with direction in student internship programs. 3. Certificate in Purchasing Management (CPM) preferred.4. Knowledge of key purchasing and negotiating methods, principles and concepts and general business operations. 5. General knowledge of legal and regulatory requirements related to procurement. 6. Basic understanding of continuous improvement techniques and methods. 7. Ability to use standard business application software and specialized purchasing and/or materials systems (e.g. electronic data interface (EDI) or manufacturing resource planning (MRP) systems). 8. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages. 9. Ability to research and analyze data and develop recommendations or resolve problems by drawing on internal information and referring to prior decisions. 10. Ability to work with only general work direction and instructions regarding the scope of assignments and determine priority and order of assignments. 11. Ability to read, analyze, and interpret financial reports. 11. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. 12. Ability to define problems, collect data, establish facts, and draw valid conclusions. 13. Ability to negotiate effectively to obtain the best price and terms. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

    EDUCATION:
    Bachelors degree (BA) in Business Administration or related field (MUST), Professional entry level position.

    WORK HOURS:
    1st Shift, Full-Time

     
    Job Number: 165172
    Job Location: Naples, FL
    Rate: $20.42 to $27.81 DOE
    Duration: 5 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Silmese Graves
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: sgraves@chiptonross.com
    Website: www.chiptonross.com

    CNC Machinist / Grinder- 3rd shift

    Description:
    PDS Tech Inc. is looking for a CNC Machinist to work on 3rd shift for our client in Torrance, CA.          

    GENERAL FUNCTION:
    Must be able to set up and operate manual and CNC milling and grinding machines as well as CNC lathes. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interrupt written work instructions. Prior experience using multi-axis CNC Mills or Lathes required ie.)Okumas. 

    Performs set-ups and all other machinist level functions related to I.D. and O.D. CNC grinding and is expected to run 2 machines simultaneously.
    Responsible for the inspection of all work performed; detecting unusual conditions, defective materials, and deviate parts; and recognizing errors in blueprints and operation sheets. Grind a wide variety of complex parts having either interim grooving, numerous steps, tapers, unusual contours, to extremely close tolerances and/or a high degree of finish on two or more of the following type grinders: cylindrical, internal, or surface.
    Perform own set-ups to include chucking and aligning of parts having irregular shapes.
    Select proper wheels, speeds, reeds, and operating sequence. Dress wheels for form, taper, steps, straight and unusual forms. Inspect own work using sine bars, air gages, diatest, V-blocks, profilometers angle plates, and electronic gaging equipment.

    ESSENTIAL JOB FUNCTIONS:
    Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machines at a time, depending on production needs.
    Employee must be comfortable multi-tasking in a fast paced environment.
     
    TECHNICAL REQUIREMENTS
    EXPERIENCE:
    • Candidate must possess 3 years of Machinist experience (NOT SIMPLY MACHINE OPERATION).
    • Must be comfortable setting-up and troubleshooting mechanical issues with CNC Machines. Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges. 
    • **Gear and/or grind experience a plus**

    High School diploma or GED required. 
    Machining trade a plus.
     
    Job Number: 1710068647
    Job Location: Torrance, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqtfAAC&URLSource=cjhunter

    CREO Product Definition & Verification (Checking) Designer III/IV

    Description:
    Creo Product Definition & Verification (Checking) Designer III/IV

    Location: Canoga Park, CA
    Pay Rate: DOE ($45/hr - $60/hr)
    Duration: 6 month W2 contract
    Shift: Regular 40 hour week, possible overtime
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    -Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
    -Typical responsibilities include: Prepare product definition (CAD models and drawings).
    -Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    Breakdown:
    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
    30% - Performs design calculations to validate any phase of design requirements.
    20% - Estimation of resources and schedule required to complete a design activity and training to staff.
    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    Skills:
    -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    Education:
    -Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

    Required Skills:
    CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

    Additional: PACKAGING ENGINEERING HARNESS CABLING
     
    Job Number: 8026
    Job Location: Canoga Park, CA
    Rate: 45-60
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    Circuit Card Assembly Specialist

    Description:
    PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
    • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
    • Performs simple rework and modification to circuit card parts and assemblies.
    • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
    • Documents results in accordance with applicable procedures.
    • Collects and inputs data for statistical process control analysis.

    Work related skills equivalent to 3 years of circuit card related technical experience
    Associates (2-year) degree in electronics, mechanical or other technical discipline 

    Basic Manufacturing Skills

    Basic Electricity

    Circuit Card Assembly (CCA) experience

    J-standard soldering certified

     
     
    Job Number: 1710072262
    Job Location: Huntsville, AL
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023APlAAM&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Components Engineer

    Description:
    Must have secret clearance

    Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.
     
    Job Number: 40842
    Job Location: FL
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 10/05/2017
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    Components Engineer - Level 2 - TX - C

    Description:
    Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

    RESPONSIBILITIES:
    Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

    REQUIRED EXPERIENCE:
    Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

    PREFERRED EXPERIENCE:
    Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80, 1st Shift

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


     
    Job Number: 164049
    Job Location: Dallas, TX
    Rate: Up to $75.00 DOE
    Duration: 12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

    Description:
    159780
    Requirement# MFC-REQ-1421
    Work location Dallas, TX
    Work Week 9/80
    Priority
    Needed Date 07/05/2017
    End Date 07/05/2018
    Number of Resources 1
    Security Clearance Ability to Obtain Secret
    (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

    Type of Service: Engineering
    Title: Components Engineer - Level 2
    Description
    Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

    Skill/Experience/Education
    Mandatory:

    Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
    Desired:

    Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

    Skill Matrix

    Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
    Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes



    Interview Required Yes
    Max Pay Rate 75.00 USD
    Shift 1st Shift
    OT Allowed No
    Travel No
    Non-Exempt
     
    Job Number: JE-1421
    Job Location: Dallas, TX
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 10/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Components Engineer - Level 2 Level 2- Interim Secret

    Description:
    PDS Tech, Inc. is seeking a Components Engineer- Level 2 for an open position in Dallas, TX.
    Job Description:
    • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
    • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
    • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
    • Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. 

    Mandatory Skills:
    • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
    • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
    • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
    • The candidate will periodically be required to make presentations to program management and customers.
    • Must have ability to obtain a Secret security clearance. 
    • Parts Management=  Working with designers to select components for use in designs. 
    • Obsolescence = Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 
    • Must have Interim Secret Clerance.


    Desired Skills:

    • Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
    • Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline. 


     
     
    Job Number: 1710070154
    Job Location: Grand Prairie, TX
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Dale Hightower
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Cq0WAAS&URLSource=cjhunter

    Components Engineer - Level 3

    Description:
    Location: Orlando, FL
    Rate: $40.00 - $45.00/HR
    Duration: 1 year contract
    Shift: 4x10

    **MUST have an Active Secret Clearance or have had one within the last two (2) years**

    Description
    - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
    - Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
    - Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
    - Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

    Skills:
    - Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
    - Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
    - Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
    - The candidate will periodically be required to make presentations to program management and customers.

    Skill/Experience/Education
    Mandatory:
    - Five years or more of experience in Component Engineering.
    - Must be proficient with computer tools such as MS Excel.
    - Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
    - Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
    - Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
     
    Job Number: 7694
    Job Location: Orlando, FL
    Rate: $40.00 - $45.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Components Engineer - Level 3 (3) - FL - C

    Description:
    Chipton-Ross is seeking a Components Engineer - Level 3 (3) for an opening in Orlando, FL.

    RESPONSIBILITIES:
    Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

    REQUIRED EXPERIENCE:
    Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    4/10, Full-Time

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 164497
    Job Location: Orlando, FL
    Rate: Up to $45.00 DOE
    Duration: 12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Components Engineer - Level 3 with active secret FL

    Description:
    Requirement #MFC-REQ-1448
    Work Location Orlando, FL (5600 Sand Lake Rd. Orlando, FL 32819, Orlando, Florida )
    Work Week 4/10
    Needed Date 09/11/2017
    End Date 09/03/2018
    Number of Resources 3

    Active Secret to start


    Title:Components Engineer - Level 3

    Description
    Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

    Skill/Experience/Education
    Mandatory:

    Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


    Interview Required Yes
    Max Pay Rate 45.00 USD

    OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
    Non-Exempt
     
    Job Number: JE-1448
    Job Location: Orlando, FL
    Rate: 45/hr max
    Duration: 12 month contract
    Input Date: 10/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Components Engineer - Level 3- Interim Secret

    Description:
    PDS Tech, Inc. is seeking a  Components Engineer - Level 3 for an open position in Orlando, FL
    Job Description: 

    • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
    • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
    • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

    Skills:
    • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
    • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
    • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
    • The candidate will periodically be required to make presentations to program management and customers. 


    Mandatory Skills:

    • Five years or more of experience in Component Engineering.
    • Must be proficient with computer tools such as MS Excel.
    • Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
    • Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
    • Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


     
     
    Job Number: 1710071428
    Job Location: Orlando, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Dale Hightower
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237hoAAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Contract - NC Eng II

    Description:
    Unique Skills:

    Must be proficient with Catia modeling, drafting, and Catia NC Mill Function.


    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.


    Position Purpose:
    Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

    Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

    Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
     
    Job Number: 116721
    Job Location: Savannah, GA
    Per Diem: Possible
    Overtime: Possible
    Start Date: ASAP
    Input Date: 10/12/2017
    Firm Name: INTERGEN GROUP
    Attention: kim Mason
    Address: SUITE 200
    5051 PEACHTREE CORNERS CIR

    City, State: PEACHTREE CORNERS, GA 30092
    Phone: 678/318-1816
    Fax Phone: 678/493-1467
    Website: www.intergengroup.com

    Creo Product Definition & Verification (Checking) Designer III/IV

    Description:
    ** Candidates must be U.S. Citizens **

    Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
    30% - Performs design calculations to validate any phase of design requirements.
    20% - Estimation of resources and schedule required to complete a design activity and training to staff.
    10% - Provide technical guidance to less senior CAD designers and to design support personnel.
    Skills:
    -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    Required Skills:
    CREO
    GEOMETRIC DIMENSIONING
    GEOMETRIC TOLERANCING
    WINDCHILL
    AEROSPACE

    Additional Skills:
    PACKAGING ENGINEERING
    HARNESS CABLING

    Education:
    -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
     
    Job Number: 372899
    Job Location: Canoga Park, CA
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 11/23/2017
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/646-2688
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Creo Product Definition & Verification (Checking) Designer III/IV (5) - CA

    Description:
    Chipton-Ross is seeking a Creo Product Definition & Verification (Checking) Designer III/IV (5) for an opening in Canoga Park, CA.

    RESPONSIBILITIES:
    Under limited general direction and following established procedures in accordance with contractual requirements and Client policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

    30% - Performs design calculations to validate any phase of design requirements.

    20% - Estimation of resources and schedule required to complete a design activity and training to staff.

    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    REQUIRED EXPERIENCE:
    -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    PREFERRED EXPERIENCE:
    -ASME Certification in GD&T is a plus.

    ADDITIONAL EXPERIENCE:
    Creo
    Geometric Dimensioning
    Geometric Tolerancing
    Windchill
    Aerospace

    Packaging Engineering
    -Harness Cabling
    -English: Read, Write, and Speak

    EDUCATION:
    -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

    WORK HOURS:
    5/40, Full-Time

     
    Job Number: 165612
    Job Location: Canoga Park, CA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Creo Product Definition & Verification (Checking) Designer III/IV CA

    Description:
    160469/7457002

    Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
    Canoga Park, CA
    60/hr max

    Duties:

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

    30% - Performs design calculations to validate any phase of design requirements.

    20% - Estimation of resources and schedule required to complete a design activity and training to staff.

    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

    Skills and Experience:
    Required Skills:
    CREO
    GEOMETRIC DIMENSIONING
    GEOMETRIC TOLERANCING
    WINDCHILL
    AEROSPACE
    Additional Skills:
    PACKAGING ENGINEERING
    HARNESS CABLING

    # of Positions: 5

    Location:
    Canoga Park, CA


    Schedule:
    Start Date: 11/06/2017
    Estimated End Date: 05/06/2018
    Hours Per Week: 40.00
    Hours Per Day: 8.00

    Schedule Notes: Regular 40 hour week. OT possible.
     
    Job Number: MB-7457002
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 11/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Creo Product Definition & Verification (Checking) Designers

    Description:
    A leading Aerospace company, located in Canoga Park, CA, is seeking (5) Creo Product Definition & Verification (Checking) Designer III/IV for a 6+ month contract roles.

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Under limited general direction and following established procedures in accordance with contractual requirements and client policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

    30% - Performs design calculations to validate any phase of design requirements.

    20% - Estimation of resources and schedule required to complete a design activity and training to staff.

    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    Skills:
    -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    Education:
    -Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
     
    Job Number: 12654
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Months+
    Start Date: November
    Input Date: 11/16/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: AJ Sarbuland
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Email: aj.sarbuland@loginconsult.com
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo Product Definition & Verification Designer III/IV

    Description:
    Under limited general direction and following established procedures in accordance with contractual requirements and policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

    30% - Performs design calculations to validate any phase of design requirements.

    20% - Estimation of resources and schedule required to complete a design activity and training to staff.

    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.
    Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
     
    Job Number: CA39225
    Job Location: Canoga Park, CA
    Rate: up to $60.00
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos +
    Start Date: Nov 2017
    Input Date: 10/06/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Karen Wilkes
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    Creo/SolidWorks

    Description:
    EM packaging, electromechanical pkg, aircraft/aerospace, electronics

    Immediate needs, call our national recruiters
     
    Input Date: 05/15/2017
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Attention: Adam, Sean, Brendan, or Jennifer
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    Crew Station Design

    Description:
    PDS Tech is seeking a Crew Station Design for an open position in Shelton, CT.

    Responsibilities to Include:Develop and design menus, logic and display graphics in a multifunction glass cockpit Pilot Vehicle Interface (PVI) or coordinate design activities of suppliers. Assume responsibility for PVI designs and coordinate with people of various disciplines in an Integrated Product Team environment that requires flexibility and diplomacy. Coordinate evaluation of designs in simulation, take ownership of design approval, and produce configuration-managed specification documents for software requirements developers. Support hot bench, ground, and flight testing of finished product. Secondary duties may include design and development of air vehicle Crew Station Geometry and layout of controls and displays to accommodate full anthropometric range of expected users. Evaluate Crew Station Design and layout in physical and/or electronic mockups, simulations and air vehicles
     
    Required:
    - MS/MA in Human Factors, Experimental Psychology, or related degree
    - (BS Industrial Design, Industrial Engineering or equivalent with Human Factors coursework will be considered)
    - Experience with Part Mission or Full Mission simulation of Pilot Vehicle Interface designs
    - Rapid Prototyping tools such as VAPS® or equivalent
    - Basic Office and database management software (word processing, Power Point, Excel, drawing tools, etc)
    - Excellent communication, writing and presentation skills
     
    Desirable:
    - Experience in military aviation (helicopters in particular).
    - Rational ClearCase, or equivalent configuration management tool.
    - Experience with Human Modeling tools such as Jack® or equivalent.
    - Experience with 3D modeling tools such as CATIA®, ProEngineer® or equivalent
     
     
    Job Number: 1610058626
    Job Location: Shelton, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fkh2AAC&URLSource=cjhunter

    Desktop Systems Analyst - OH

    Description:
    Chipton-Ross is seeking a Desktop Systems Analyst for an opening in Cincinnati, OH.

    RESPONSIBILITIES:
    Work assignments are varied and of greater scope and complexity, often involving testing and
    troubleshooting to identify problems. Under limited supervision, incumbents analyze, troubleshoot,
    repair, and
    maintain the computer system, terminal network, and peripheral equipment relating to computer and
    network hardware and software. Performs routine preventative maintenance on all computer system
    equipment. Utilizes diagnostic programs and electronic test equipment. Performs analysis and
    administrative tasks in the planning, design and installation of new and existing personal computerbased applications. Troubleshoots and modifies PC software applications. May work on complex applications and be involved in making recommendations or decisions to meet overall departmental or organizational needs.

    Assists with design, implementation, and maintenance of IT help desk including documenting and
    tracking issues to ensure a timely resolution, evaluate issues to establish priorities and establish a
    timeframe for resolution, design statistical reports to identify reoccurring incidents that may be
    prevented.
    Performs detailed analysis and debug of failing systems and tests in order to characterize and isolate
    failures and establish working PC configurations.
    Coordinates multiple projects simultaneously, managing time and resources to ensure work is
    completed efficiently and within established timeframes.
    Maintains a positive work atmosphere by acting and communicating in a manner that is cooperative
    and supportive of customers, co-workers and managers.
    Other duties as assigned

    Building Customer Loyalty
    Effectively meeting customer needs; building productive customer relationships; taking responsibility
    for customer satisfaction and loyalty.

    Communication
    Clearly conveying information and ideas through a variety of media to individuals or groups in a
    manner that engages the audience and helps them understand and retain the message.

    Continuous Improvement
    Originating action to improve existing conditions and processes; identifying improvement
    opportunities, generating ideas, and implementing solutions.

    Continuous Learning
    Actively identifying new areas for learning; regularly creating and taking advantage of learning
    opportunities; using newly gained knowledge and skill on the job and learning through their
    application.

    Customer Focus
    Ensuring that the customer perspective is a driving force behind business decisions and activities;
    crafting and implementing service practices that meet customers' and own organization's needs.

    Engagement Readiness
    Demonstrating a willingness to commit to one's work and to invest one's time, talent, and best efforts
    in accomplishing organizational goals.

    Facilitating Change
    Encouraging others to seek opportunities for different and innovative approaches to addressing
    problems and opportunities; facilitating the implementation and acceptance of change within the
    workplace.

    Initiating Action
    Taking prompt action to accomplish objectives; taking action to achieve goals beyond what is required; being proactive.

    Innovation
    Generating innovative solutions in work situations; trying different and novel ways to deal with work
    problems and opportunities.

    Interpersonal skills
    Manages people successfully in the face of dynamic and often ambiguous situations.

    Managing Conflict
    Dealing effectively with others in an antagonistic situation; using appropriate interpersonal styles and
    methods to reduce tension or conflict between two or more people.

    Managing Work (includes Time Management)
    Effectively managing one's time and resources to ensure that work is completed efficiently.

    Technical/Professional Knowledge and Skills
    Having achieved a satisfactory level of technical and professional skill or knowledge in position-related areas; keeping up with current developments and trends in areas of expertise.

    Tenacity
    Staying with a position or plan of action until the desired objective is obtained or is no longer
    reasonably attainable.

    Resolves technical problems in a call center/help desk environment, reviewing requests submitted
    via e-mail or phone.
    Develops and uses good customer service abilities and technical skills to resolve issues surrounding
    installation and usage of software and hardware products.
    Responsible for supporting the timely process through which system problems are controlled. Will
    isolate, resolve and follow-up with end-users to resolve MIS problems of a high level of complexity.
    Provides guidance /training to less experienced personnel including Helpdesk technicians. Will
    provide evaluation input to supervisor.
    Installs, configures and troubleshoots desktop systems, laptops, workstations and network
    connectivity issues with increasing autonomy.
    Installs, configures and troubleshoots desktop software systems, including operating systems, office
    solutions, and other common desktop packages.
    Maintains and updates records and tracking databases associated with help desk problems, asset
    deployment, etc.
    Documents all work related procedures, processes, and support activities.

    REQUIRED EXPERIENCE:
    Experience/familiarity with (a) Microsoft Windows operating systems (b) Familiarity with MS Office
    Suite (c) The implementation of commercial off the shelf products (d) computer hardware.

    ADDITIONAL EXPERIENCE:
    Training Period:
    Initial training will require 90 days to 1 year. Training includes classroom sessions, on the job
    experience, and web based training in the following areas: Company policies and procedures, Code of Ethics, On-line Compliance Training, EH&S, HR Information System, Payroll, and Time and
    Attendance requirements. Successful completion of training requirements will be evidenced through
    continued employment and/or performance evaluations.

    Responsibility & Authority
    Incumbents are responsible for and authorized to carry out assigned duties.

    EDUCATION:
    Degree/Diploma Obtained Program of Study
    Associates Computer Science
    Associates degree in computer science or information systems, bachelors degree preferred.


    WORK HOURS:
    4/9 & 1/4 (definition 4 9-hour days and 1 4-hour day), 1st Shift, Full-Time
     
    Job Number: 165546
    Job Location: Cincinnati, OH
    Rate: Up to $26.00 DOE
    Duration: 12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Rochelle Anderson
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: randerson@chiptonross.com
    Website: www.chiptonross.com

    Diagnostic Troubleshooting Technical Writer, Sr.

    Description:
    PDS Tech, Inc is seeking a candidate for the Diagnostic Troubleshooting Technical Writer, Sr. position located in Sterling Heights, MI.  
    • Creates and revises complex technical documentation to support the repair and maintenance of company products.
    • Ensures documents conform to company and government standards and specifications and language usage principles.
    • Develops fault isolation and diagnostic strategies.
    • Experienced with 2 yrs of drivability and diagnostics regarding electronic, pneumatic, and hydraulic systems.
    • Creates and revises technical documentation using state-of-the-art publishing software technology including product descriptions, detailed functional descriptions, operating procedures, fault isolation, maintenance and repair procedures, illustrated parts breakdown (IPB), miscellaneous reports, or other technical documentation pertaining to company products.
    • Ensures compliance with customer requirements, government specifications, engineering standards, and language usage principles.
    • Researches and consults with engineering staff on systems and equipment to create and revise technical documentation.
    • Analyzes and interprets engineering drawings and other technical data to translate information into technical documentation.
    • Evaluates illustrations and graphics to determine how to best utilize them within documentation.
    • Requests the creation of new illustrations/graphics or changes to existing illustrations/graphics.
    • Ability to understand complex engineering designs, analyze and interpret engineering drawings and terminology, and translate into understandable language for non-engineers.
    • Ability to create and revise complex technical documentation, effectively answer customer questions and concerns related to company equipment and systems, engage in problem solving discussions with cross-functional team members, provide guidance to cross-functional team members, and ensure documentation is produced on time and within budget.
    • Ability to concentrate, attention to detail, and command of the English language.

    XML Authoring Tool Experience (e.g. Arbortext Epic Editor and Oxygen software), MS Office Tools/Suite (Word, Excel, PowerPoint required; Access a plus), Adobe Acrobat Professional PDF Software – proficient for use of illustration markups; or use of a similar PDF (electronic) markup tool, Mechanical/Electrical/Operator Tech Writer Experience/Knowledge Required, preferred in the defense industry, Validation/Verification, on-vehicle experience a plus, Content Management System (CMS) experience a plus, Customer Interaction/Customer Service skills required (some positions involve direct customer interface representing client)

    Experience Required: 2 years experience with bachelor's degree 5 years experience without degree
     
     
    Job Number: 1710073624
    Job Location: Sterling Heights, MI
    Duration: 5 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Todd Brown
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GsXAAU&URLSource=cjhunter

    EE Technician

    Description:
    PDS Tech, Inc is seeking a candidate for the EE Technician for a 12 month contract position located in Santa Clara Valley, CA.  

    Looking for driven technicians to support the Hardware and Firmware design teams with familiarity with Sensor / Camera / Radar / Lidar / RF. 

    If you are interested, please email Jill Maasberg your resume to jmaasberg@pdstech.com

    We are looking for 5 EE Technicians, one each with the following strengths
    1. Need someone with good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses.
    2. Need someone with RF background, self motivated, able to work with little instructions.
    3. Need a candidate with some background in SW, good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses. Python script, Linux SW
    4. Need a candidate with a Sensor / camera background. Hands on work. some background in electronics is a plus, able to work with little instruction.
    5. Need a floating tech, SW, good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses. Python script, Linux SW
    ​Key Qualifications:
    - Tech Diploma in Electrical Engineering
    - Hands-on experience with electronic product assembly.
    - Hands on experience in prototype work and functional verification specifically with electronics.
    - Hands on and fluent with lab equipment: digital multimeter, spectrum analyzer, signal generator, oscilloscope, power supply, data loggeretc.
    - Must have superb soldering & rework skills (0402, QFNs, BGAs, CSPsetc)
    - Strong documentation and communication skills- strong technical writing.
    - Great computer skills: Mac & PC
    - Able to manage multiple tasks at once
    - Needs to be able to work independently but able to take direction from multiple sources (Lab Manager and Lab Engineers).
    -Sensor / Camera / Radar / Lidar / RF. 

    Valuable Prior Experience:
    - Developing automated test and measurement systems
    - System of environments optimized for high speeded measurements
    - Schematic capture for boards or flexes
    - Optical experience
     
    Job Number: 1710072884
    Job Location: Santa Clara, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jill Maasberg
    Address: 12708 RIATA VISTA CIR STE A-108
    City, State: AUSTIN, TX 78727
    Phone: 512/343-0303
    800 Phone: 800/917-2841
    Email: cecjaustin@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EUrAAM&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ELECTRICAL ENGINEER - SYSTEM INTEGRATION ENGINEER -

    Description:
    Job Summary: Prepare avionics and electrical systems certification reports, ground test plans and certification plans for the T-6C aircraft. Generate statements of compliance for avionics and electrical systems supporting aircraft Type Certification to the requirements of 14 CFR Part 23 and EASA CS-23.

    Responsibilities:
    *Responsible for certification support of avionics and electrical systems on T-6C aircraft.
    *Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground test plans/results and certification reports showing avionics /electrical systems compliance to the requirements of 14 CFR Part 23 and EASA CS-23.
    *Evaluate and analyze avionics systems design for completion of function hazard assessments and system safety assessments.
    *Participate in equipment, system, and aircraft ground testing
    *Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.

    Requirements:
    *5 to 10 years prior certification experience preparing compliance statements for avionics and electrical systems showing compliance with Federal Aviation Administration regulations 14 CFR Part 23 is required.
    *Experience with the application of RTCA DO-160, DO178 and DO-254 relative to showing compliance for avionics/electrical systems installation on aircraft to the requirements of 14 CFR part 23 is required.
    *Experience with use of electronic test equipment to verify proper operation/troubleshooting of avionics electrical systems is required.
    *Strong computer, written and verbal communication skills are required.
    *Experience with Microsoft Office Word, Excel, PowerPoint are required, Access and Project experience is desired.
    *Time management skills are required to work multiple concurrent projects of various size and scope.

    Desired:
    *B.S. or advanced degree from an ABET accredited institution in Computer, Electrical Engineering or Engineering Technology is preferred.
    *Prior certification experience preparing compliance statements for avionics and electrical systems showing compliance with EASA CS-23 is desired.
    *Previous Avionics Electrical Systems FAA Designated Engineering Representative (DER) and/or, ODA Unit Member experience is desired.
    *10 to 15 years of avionics/electrical systems integration experience on Part 23 aircraft is desired.
    *Experience with the System Safety certification process per SAE ARP4754A and ARP4761 is preferred.
    *Must be able to coordinate, communicate and develop good working relations with ODA Unit Members
    *Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is desired.
     
    Job Number: 126668
    Job Location: Wichita, KS
    Input Date: 10/04/2017
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: GCP Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Certification Engineers - Wichita, KS

    Description:
    STS AeroStaff Services now offers Electrical Certification Engineer jobs in Wichita, Kansas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
    • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
    • Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
    • Assist in development of functional test documents for avionics/electrical systems
    • Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
    • Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

    Qualifications:

    • Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
    • Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
    • Strong written and verbal communication skills and competency in one of the subject areas listed above
    • Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38215
    Job Location: Wichita, KS
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 09/28/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Electrical Design Engineer

    Location: Everett, Washington
    Duration: 6 months
    Rate: up to $55/hr


    Primary Responsibilities
    Summary
    This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards.  The Design Engineer will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
     
    Tasks Performed
     
    Essential Duties and Responsibilities include the following with other duties as assigned:
    Assigned design tasks include but not limited to: basic aircraft electrical design, wiring  installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and  internal specifications.
    Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
    Participates in teams to support the development of designs. Supports the documentation of design implementation.
    Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
    Obtain, interpret, and analyze OEM airplane electrical design data.
    Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
    Troubleshoots basic electronic/electrical system/subsystems problems.
    Actively support engineering department goals and initiatives.
    Coordinate with other departments as necessary.
    Utilize internal drawing/document standards per customer or regulatory agency requirements.
    Some domestic or international travel may be required.
    Perform engineering design check and sign documents.  With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems.
    Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc.
    Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc.
    Define engineering task scope (such as work scope validation) for design tasks.
    Perform engineering design/analysis with minimum technical guidance.
    Provide junior level mentoring and performance management input to PE/Functional Manager.
    Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
    Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).
    Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments.
    Act as design authority for design tasks.
    Define engineer tasks for PE/functional manager.
    Desired Education
    BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
    Desired Degree
    BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
    Desired Job Experience

    Education and/or Experience
    BS degree Electrical Engineering, Aerospace Engineering or related Engineering field and 8 years or more of experience or equivalent working experience (18 years minimum in an aerospace related field).  Education level required, and amount of relevant experience required here.

    Notes:
    Should have Aircraft Modification or Retrofit Experience, Electrical background.
    experience in any of the following
    Aircraft Installations
    Boeing Aircraft preferably 777
    AutoCAD
    Electrical Systems design
    Wiring Diagrams
    Harness design
    Cabin Databases and Lighting Databases is a plus

    The Structures Company, LLC is an AA/EOE
     
    Job Location: Everett, WA
    Rate: up to 55/hr
    Per Diem: yes
    Overtime: possible
    Duration: 6 mos +
    Start Date: asap
    Input Date: 10/17/2017
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Mark Sharp
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    •Security Clearance desirable but not required.
    •Experience: 8+ years of domain experience
    •Design, development, modification and analysis of various electronic systems.
    •Troubleshoot and diagnose malfunctions in new/existing products or systems and makes modifications as needed.
    •Compile and evaluate design and test data.
    •Analyze, develops and recommends design approaches.
    •Must be familiar with VHDL, Verilog, FPGAs, CPLDs, Schematic Capture/Simulation (preferably Mentor tools). 8-10 years Hardware design experience
     
    Job Number: 40855
    Job Location: OH
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos +
    Start Date: ASAP
    Input Date: 10/10/2017
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements. Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry. Responsibilities • Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test) • Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance • Assist Control Account Manager with Estimate to Complete • Coordinate activities associated with review and approval of engineering specifications and engineering drawings • Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support electronic Engineering Change process. • Coordinate, track and support the assembly and test of development hardware • Support supplier selection and part procurement • Provide status reports • Support program reviews both internal and external • Coordinate closure of action items • Support operations to fabricate, assemble, test and qualify flight hardware • Ensure standard work flow maps are complete • Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Skills/Experience • Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development • Strong project management, organizational and prioritization skills • Ability to work independently or as part of an integrated product team • Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders • Ability to read and understand technical manuals, blueprints or drawings • Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results • Understanding Earned Value Management Basics • Strong troubleshooting and problem solving skills • Must understand fundamentals of Root Cause Analysis • Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information • Strong written and verbal skills including thorough knowledge of Microsoft Office products
     
    Job Number: 39085
    Job Location: Windsor Locks, CT
    Duration: 12 months
    Start Date: ASAP
    Input Date: 09/28/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 1700 WELLS RD STE 1
    City, State: ORANGE PARK, FL 32073-2373
    Phone: 904/562-3215
    800 Phone: 866/277-3343
    Fax Phone: 904/713-2000
    Website: www.apollopros.com

    Electrical Engineer

    Description:
    PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
    In your role, you will:


    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

    Principal Duties and Responsibilities:

    Essential Functions:

    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    Education and Experience Requirements:



    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

    Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

    POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
     
    Job Number: 1710071488
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

    Electrical Engineer

    Description:

    PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
    Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

    The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

    • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
    • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
    • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
    • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
    • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
    • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
    • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
    • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
    • Originates, refines, and releases complex manufacturing or inspection work directions.
    • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
    • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
    • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
    • Provides technical consultation to management and others, and leads technical project teams. 
    • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
    • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
    • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
    • May perform other duties as required.
    • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

    Basic Qualifications: 
    • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
    • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
    • Minimum two (2) years directly applied engineering experience.


    Additional Qualifications: 

    • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
    • Advanced degree in an engineering, physics or business discipline is advantageous.
    • Six Sigma certification (black belt; green belt) preferred.
    • Experience/history reflective of executing continuous improvement toward products and/or processes.
    • Technical project management experience.
    • Experience/familiarity with enterprise resource planning and/or earned value management systems.
    • Experience presenting technical material to varied levels of audiences.
    • Willingness to travel up to 25% of time.

     
    Job Number: 1710068676
    Job Location: KS City, MO
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tanya James
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

    Electrical Engineer

    Description:
    Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
    Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


    JOB RESPONSIBILITIES

    • Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
    • Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
    • Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
    • Typically focuses on existing products or processes.
    • Liaises with drafters, technicians, and others to contribute to project completion.
    • Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
    • Performs other related duties as required.



    MINIMUM REQUIREMENTS:
    • Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
    • Aerospace industry experience is strongly preferred.
    • Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
     
    Job Location: Everett, WA
    Rate: Negotiable
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/22/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: andrew.walbert@aictalent.com
    Website: www.acsicorp.com

    Electrical Engineer - ASICs / FPGAs

    Description:
    PDS Tech, Inc. is seeking Senior level Electrical or Computer Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
     
    You will be involved in the testbench design, implementation, and verification of a wide variety of high-performance digital ASICs and FPGAs applied to signal processing, image processing, and information assurance applications.
     
     In this role you will:
    • Provide verification environment architecture and design using SystemVerilog with OVM/UVM
    • Create written test cases, code coverage tracking, and functional coverage tracking
    • Provide testbench development for the verification of RTL blocks using VHDL or SystemVerilog
    • Recommend new tools and practices for continuous improvement in the group's ASIC / FPGA verification flow

    • Experience with testbench development for the verification of RTL blocks using VHDL and/or SystemVerilog
    • Familiarity with best practice chip-level verification techniques and languages (e.g. constrained random, functional coverage, SystemVerilog)
    • Familiarity with revision control concepts and tools (e.g. Clearcase, Subversion)
    • Ability to work with minimal supervision, as a part of a team of engineers with a variety of skills and backgrounds, matrixed into projects with aggressive schedules and frequent milestones
    • Strong oral and written communication skills and the ability to document and present one's work and status
    • Ability to obtain a Security Clearance. US Citizenship is required.
    • Bachelor's Degree in either Electrical Engineering or Computer Engineering field

     
    Desired skills:

    • ASIC / FPGA lab validation with advanced lab equipment
    • Design for Test (DFT) and manufacturability issues
    • Experience with Unix, scripting, C/C++, Python, and/or Perl
    • Digital circuit architecture, design, resource tradeoffs, timing analysis and timing closure
    • Proficiency using ASIC and/or FPGA simulation and synthesis tools (e.g. Questasim, Synplify, FPGA-specific tools)

     
    Job Number: 1610053774
    Job Location: Cedar Rapids, IA
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jason Andrzejewski
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CB3OAAW&URLSource=cjhunter

    Electrical Engineer - Hardware

    Description:
    The Contract Electrical Engineer is responsible for the design and development of electric vehicle power electronics and electrified vehicle systems and devices for commercial applications. The Engineer will develop efficient and cost effective power electronics designs using cutting edge technologies, latest test and evaluation equipment, and robust simulation tools. The Engineer will define and carry out all required development and validation testing to ensure achievement of all functional objectives and assure compliance to program goals. The Engineer will participate in supplier assessments and post-test inspection reviews; including detailed failure analysis. They are required to work closely with the chosen suppliers and manufacturing entities to ensure designs are robust to customer requirements, meet exact function, and are able to be manufactured without defect. The Engineer will initiate production source packages and execute the design using strong leadership abilities and outstanding teamwork and communication skills.
    •    Bachelor of Science in Electrical Engineering.
    •    Minimum 5 years' experience in electronics and circuit design and/or development
    •    Demonstrated understanding of power electronics and devices
    •    DVP&R and DFMEA creation and execution experience
    •    Good analytical and problem solving skills
    •    Understanding of electrical engineering protocols and standards
    •    Highly motivated and self-starter
    •    Demonstrated ability to work in a team environment

    Preferred Qualifications

    •    Masters of Science in Electrical Engineering.
    •    Power electronics/electrical models and simulation experience
    •    Experience measuring switching signals using Digital Storage Oscilloscopes.
    •    Power electronics specifications expertise
    •    Electric motor and power train controls experience

     
     
    Job Number: 1710062239
    Job Location: Saint Louis, MO
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G6JRAA0&URLSource=cjhunter

    Electrical Engineer - Level 3

    Description:
    Electrical Engineer - Level 3

    Duration: 1 year contract
    Pay Rate: DOE ($50/hr - $55/hr)
    Location: Grand Prairie, TX
    Shift: First, 9/80
    *The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

    Job Description:
    -Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
    -The power voltage card will need to fit within an existing space.
    -This effort will require part selection, design review, and design release.
    -The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
    -The engineer must be proficient in Cadence; have good communication skills.

    Mandatory Skills:
    -Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
    -Bachelors degree in Electrical Engineering with five or more years of experience.
    -Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
    -Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
    -Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
    -Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
    -Proficiency with electronic analyzers and other trouble shooting tools is required.
    -Ability to develop system and subsystem performance requirements.
    -Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

    REQUIRED Skill Matrix:
    -Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
     
    Job Number: 7065
    Job Location: Grand Prairie, TX
    Rate: 50.00-55.00
    Per Diem: Possible
    Overtime: Yes
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    Electrical Engineer - Product/Process

    Description:
    PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
    Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

    This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

    Summary of Duties:   
     Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
    • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
    • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
    • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
    • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
    • Participates in establishing operating procedures on new products and components.
    • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
    • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
    • Originates, refines, and releases complex manufacturing or inspection work directions.
    • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
    • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
    • Provides technical consultation to management and others, and leads technical project teams.
    • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
    • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
    • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
    • May perform other duties as required.
    • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

    Basic Qualifications: 
    • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
    • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
    • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

    Additional Qualifications:  
     
    • Existing DOE Q clearance.
    • MS in Electrical Engineering from ABET accredited institution.
    • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
    • Demonstrated experience in project leadership.
    • Broad knowledge of manufacturing or quality processes and techniques.
    • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
    • Electrical Engineering concepts and projects.
    • Ability to work without supervision, with latitude for independent action and decision making.
    • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
    • RF engineering experience.
    • Strong communication skills, both written and verbal.
    • Demonstrated technical innovation and problem solving.
    • Significant experience in a manufacturing or design environment.

     
    Job Number: 1710068677
    Job Location: KS City, MO
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tanya James
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

    Electrical Engineer - Technical Specialist I

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
    Unique Skills:
    Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

    Education and Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
     
    Job Number: 372818
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 11/23/2017
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/646-2688
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Engineer 2 - WA

    Description:
    Chipton-Ross is seeking an Electrical Engineer 2 located in Bingen, WA

    RESPONSIBILITIES:
    Analyzes and interprets electrical system/subsystem requirements and specifications. Develops requirements and specifications for printed circuit board assemblies. Performs risk assessments and makes mitigation recommendations. Decomposes system requirements. Creates electronic hardware module-level architectures. Develops detailed electrical hardware and firmware designs. Identifies electronic hardware interface controls conflicts and makes recommendations. Creates electronic hardware documentation release packages. Develops and performs verification and validation procedures for electronic hardware components. Conducts testing/ analysis of avionics/electrical components, equipment, and systems. Documents technical performance metrics. Diagnoses malfunctions in existing products and makes design improvements and/or modifications.

    REQUIRED EXPERIENCE:
    "Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).
    "Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog). Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
    "Knowledge of electrical engineering theories (e.g., Kirchhoff's Law, Ohm's Law, lighting, power factor, control theory), formula selection (e.g., room cavity ratios, short-circuit, voltage drop, motor counts, capacitor, harmonic correction, load calculations), and methods (e.g., relay coordination, root cause analysis).
    "Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
    "Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity. Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.
    "Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

    EDUCATION:
    This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Typical experience: 2-4 years in an engineering classification with a Bachelor's degree or 0-2 year's experience in an engineering classification with a Master's degree.

    WORK HOURS:
    Full-Time

     
    Job Number: 165599
    Job Location: Bingen, WA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Electrical Engineer 3 - WA

    Description:
    Chipton-Ross is seeking an Electrical Engineer 3 located in Bingen, WA

    RESPONSIBILITIES:
    Analyzes, interprets and develops electrical system/subsystem requirements and specifications. Allocates requirements across module-level design elements and conducts trade studies. Performs risk assessments and generates risk mitigation plans and strategies. Decomposes system requirements. Creates electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes electronic hardware interface controls and de-conflicts interface violations. Develops and releases electronic hardware documentation packages. Develops andperforms verification and validation procedures against operational and functional requirements. Conducts testing/analysis of avionics/electrical components, equipment, and systems. Establishes technical performance metrics. Diagnoses operational anomalies and makes design improvements and/or modifications. Participates in Project Design Reviews

    REQUIRED EXPERIENCE:
    Familiar with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts
    within circuit design. Familiarity with Rigid PCB technologies (IPC Standards, PCB
    fabrication, PCBA Assembly processes and documentation standards, AS9100
    standards), Ethernet, RS232 and VeriLog. Familiarization with Flex and Rigid-Flex
    Technologies a plus
    CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
    Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
    Test and Debug: Mixed Signal Ocilliscope, Spectrum Analyzer, Digital Multi-meter,Programable Load and other test tools.
    Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
    Programming skills(added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C

    EDUCATION:
    Accredited BS in Electrical Engineering with a minimum of 10 years of experience or MS in
    Electrical engineering with 5 years of experience in electronics hardware design.

    WORK HOURS: 9/80 WORK WEEK
     
    Job Number: 165408
    Job Location: Bingen, WA
    Rate: $DOE
    Duration: 6 - 9 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Electrical Engineer 3 - WA

    Description:
    Chipton-Ross is seeking an Electrical Engineer 3 located in Bingen, WA

    RESPONSIBILITIES:
    Client is a leading high-tech autonomous systems company driven by a culture of agility and systematic improvement. Since 1994 Client has led in the design, development and production of small autonomous aircraft for Unmanned Aircraft Systems (UAS). We currently produce and sell an ever growing fleet of Unmanned Aircraft Systems that are low-cost, long-endurance, and have low personnel requirements. These UASs provide a no-runway launch, unprecedented stabilized day and night video for ISR, robotic flight control, and a no-nets capture.
    As we continue our rapid growth in the UAS/UAV market we are looking for experienced talent to help us achieve our goal of maintaining the agile and innovative problem-solving capabilities in all the products we offer.

    Analyzes, interprets and develops electrical system/subsystem requirements and specifications. Allocates requirements across module-level design elements and conducts trade studies. Performs risk assessments and generates risk mitigation plans and strategies. Decomposes system requirements. Creates electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes electronic hardware interface controls and de-conflicts interface violations. Develops and releases electronic hardware documentation packages. Develops andperforms verification and validation procedures against operational and functional requirements. Conducts testing/analysis of avionics/electrical components, equipment, and systems. Establishes technical performance metrics. Diagnoses operational anomalies and makes design improvements and/or modifications. Participates in Project Design Reviews

    REQUIRED EXPERIENCE:
    Familiar with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts
    within circuit design. Familiarity with Rigid PCB technologies (IPC Standards, PCB
    fabrication, PCBA Assembly processes and documentation standards, AS9100
    standards), Ethernet, RS232 and VeriLog. Familiarization with Flex and Rigid-Flex
    Technologies a plus

    Specific Experience Required
    CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
    Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
    Test and Debug: Mixed Signal Ocilliscope, Spectrum Analyzer, Digital Multi-meter, Programable Load and other test tools.
    Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
    Programming skills (added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C

    EDUCATION:
    Accredited BS in Electrical Engineering with a minimum of 10 years of experience or MS in
    Electrical engineering with 5 years of experience in electronics hardware design

    WORK HOURS:
    Full-Time
    9/80 work week

     
    Job Number: 163959
    Job Location: Bingen, WA
    Rate: $DOE
    Duration: 6-9 MONTHS
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: daubert@chiptonross.com
    Website: www.chiptonross.com

    Electrical Engineer Level - 3 Secret

    Description:
    PDS Tech, Inc. is seeking a Electrical Engineer - Level 3 for an open position in Grand Prairie, TX.
    Job Description: 

    • Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
    • The power voltage card will need to fit within an existing space.
    • This effort will require part selection, design review, and design release.
    • The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
    • The engineer must be proficient in Cadence; have good communication skills. 

    Mandatory Skills:
    • Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
    • Bachelors degree in Electrical Engineering with five or more years of experience.
    • Circuit Design  Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 
    • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
    • Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
    • Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
    • Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
    • Proficiency with electronic analyzers and other trouble shooting tools is required.
    • Ability to develop system and subsystem performance requirements.
    • Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis. 

     
    Job Number: 1710063599
    Job Location: Grand Prairie, TX
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBUFAA4&URLSource=cjhunter

    Electrical Fabricator

    Description:
    PDS Tech, Inc.is seeking an ELEC. FLT CNTRL/SIM. LABS for an open position in Stratford, CT
    Responsibilities include:

    • Function: Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.
    • Job Duties:  Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    • Experience with electrical and electronic fabrication.
    • Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    • Experience with all the tooling and dies required to terminate mil-spec wires
    • Experience terminating EMI harness assemblies
    • Experience fabricating wire harnesses
    • Experience fabricating test sets
    • Experience using hand tools, mechanical and electrical
    • Experience with schematics and electrical diagrams
    • Evidence of Lockout Tag Out Authorized training

    Other Requirements:

    • Requires Safety shoes
    • Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

     
    Job Number: 1610054244
    Job Location: Stratford, CT
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CHEnAAO&URLSource=cjhunter

    Electrical Floor Support Engineer

    Description:
    PDS Tech, Inc is seeking a candidate for the Electrical Floor Support Engineer position located in York, PA.  
    THIS IS A 3rd SHIFT POSITION
    • Applies advanced knowledge of engineering and scientific principles and practices in area of specialized expertise to develop innovative solutions to complex technical problems.
    • Provides technical leadership, consultation, or guidance to specialized engineering groups and other technical personnel.
    • Conceptualizes, creates, and analyzes designs to ensure engineering projects meet technical, cost, quality, and performance requirements.
    • Develops and writes technical documentation, makes revisions to existing documentation, and provides input to technical papers or presentations.
    • May deliver technical presentations.
    • Initiates and maintains external contacts with key experts and officials of other companies, national labs, academic institutions, and government agencies.
    • Performs technical analysis, testing, calculations, and evaluation of results to solve complex engineering problems, using specialized equipment, or by creating computer programs, models, or simulations.
    • Performs electrical and/or electronic repairs using approved methods.
    • Prepares, presents, and defends project technical results and recommendations to customers.
    • Participates in formal technical reviews.
    • Prepares technical and cost portions of proposals related to area of expertise.
    • Maintains up-to-date knowledge of relevant engineering discipline(s), industry practices, trends, and applications.
    • Advises senior management on new developments and programs.
    • May direct the work of less senior technical personnel.
    • Maintains a safe work environment and ensures compliance with safety objectives and policies.

    • Bachelors degree in Electrical Engineering or an equivalent technical degree and 2 years work experience
    • Working knowledge of electrical engineering tools is highly desired
    • Working knowledge of fundamental concepts, practices, and procedures of a relevant technical field of specialization.
    • Familiarity with current computer applications and technologies in applicable engineering disciplines.
    • Ability to prepare technical reports, papers, and presentations and deliver them in written and oral form to customers, industry leaders, and senior management.
    • Ability to solve moderately complex technical design and development problems that require a professional level of engineering knowledge.
    • Ability to develop and maintain effective relationships with customers to solve moderately complex technical problems.
    • Familiarity with relevant military and commercial design standards.
    • Experience working with electrical/electronic systems of military ground vehicles
    • Working knowledge of military electrical connector and electrical cabling specifications SAEJ1939 CANBus, 10/100 and Gigabit Ethernet
    • Protocols Integration of military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
    • Experience using lab test equipment (oscilloscopes, power analyzers, CAN, DAC/ADC converters) for test and verification is a must.
    • The candidate must have the ability to access and move about a large military vehicle during integration and test activities.
    • Excellent ability to rapidly troubleshoot and isolate system level problems discovered during production, ability to determine root cause including design defects and production/supplier defects, and ability to recommend near-term workarounds.
    • Regularly required to sit; frequently required to move about, and reach with hands and arms; may occasionally be required to balance; stoop, kneel, crouch or crawl.
    • Normal office environment.
    • May require visits or assignments to shop or production areas, test facilities, or customer sites.
    • May require travel.

     
    Job Number: 1710073653
    Job Location: York, PA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Todd Brown
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GwAAAU&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Integration Engineer

    Description:
    Looking for a systems Integration Engineer with a BSEE or higher with 10 to 15 years of design experience integrating avionics and electrical systems on a Part 23 aircraft. Must also have experience with the use of electronic test equipment to verify proper system operation and troubleshooting of avionics and electrical systems.
     
    Input Date: 10/11/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Candace
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    Electrical Technician

    Description:
    One year in length
    Maximum Hourly pay rate $18.00
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     

     
    Job Number: 1710063131
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Test Engineer (contract)

    Description:
    The Electronic Combat Solutions business area is seeking electrical engineering candidates interested in technical leadership roles on established programs. The IEWS Sustainment team is looking for a highly motivated Product / Process Engineer to support transition to production and sustainment activities on high complexity electronic products. This position will be for the hardware technical lead of a multi-disciplinary engineering team.

    The hardware lead will be the primary interface to program engineering teams in: troubleshooting test failures, transitioning test equipment to a production environment, identifying product and test deficiencies to improve product yield and flow through the factory, identifying capacity concerns across test resources and driving mitigations to closure and sustaining technical production tasks on complex electro-mechanical modules and assemblies.
    Must demonstrate strong technical aptitude, communication skills and leadership skills and be able to work cross-functionally within the hardware engineering organization and with other discipline/functions.
    Must be able to lead small to mid-sized multidisciplinary hardware engineering teams through one or more phases of the hardware product lifecycle, including proposals, design, development, integration, test, transition to production and/or sustainment.

    This position may include the following activities:
    Support the test and troubleshooting of complex electronic systems, modules and sub-assemblies, working directly with production and program engineering personnel as required. May include high-speed digital products and RF products.
    Interface with Engineering, Operations, Quality and other supporting functions to drive defect resolution to root cause.
    Generate and implement improvements in product and test design and methodologies to reduce cost, increase yield, and improve throughput.
    Generate and review the technical content of test procedures, drawings, engineering specifications, reports, Engineering Change Orders, and other documentation.
    Interface with governmental customers, auditors, and suppliers as required.
    Provide training and support to manufacturing personnel.
    Support relocation of test equipment between manufacturing sites and lead transition to production.
    Support Root Cause and Corrective Action activities.
    Identify and implement Engineering Change Orders on products as required.
    Provide daily work direction to other employees on a regular basis. Mentor peers and more junior engineers in areas of expertise.
    Regularly exercise discretion and independent judgment in technical areas. Exercise considerable judgment in determining objectives.

    Skills Required:
    Experience with the design, build, integration, test and/or sustainment of complex electro-mechanical systems, specifically high-speed digital designs.
    A motivated self-starter with leadership skills and ability to effectively work in a team environment.
    Excellent problem solving skills, judgment, and analytical capability.
    The ability to lead others to closure.
    Experience presenting technical information to program teams and/or customers.
    Strong technical writing and verbal communication skills.

    Skills Preferred:
    Proficient in the development of electronic circuits, knowing the advantages, limitations, and cost tradeoffs of various electronic design approaches

    Experience Required:
    A bachelor's Degree and 8 years of relevant work experience, or equivalent experience.

    Experience Preferred:
    10+ years of experience working with complex electrical products in a transition to production and/or sustainment role.
    Experience with high-speed digital, processor and analog designs.
    Experience working with mixed technology and/or RF products in a test and troubleshooting capacity.

    Education Required:
    B.S. in Electrical Engineering

    Education Preferred:
    M.S. Electrical Engineering

    Only US Citizens are eligible to apply.
     
    Job Number: 39041
    Job Location: Nashua, NH
    Rate: $54.00
    Per Diem: yes
    Duration: 12 months
    Input Date: 10/12/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Jane Rochford
    Address: 42 MAIN ST
    City, State: WINDSOR LOCKS, CT 06096
    Phone: 860/254-6333
    800 Phone: 866/277-3343
    Fax Phone: 860/623-8228
    Website: www.apollopros.com

    Electrical Wiring Design Engineer

    Description:
    General Summary:
     
    The Electrical Wiring Design Engineer will perform wiring design and integration tasks associated with the electrical systems of the aircraft.  
    Duties and Responsibilities:
    • Creates and maintains aircraft systems wiring diagrams, parts lists, and electrical harness drawings
    • Develops wiring designs for aircraft electrical systems
    • Prepares specifications drawings, process layouts and capacity planning
    • Serves as subject matter expert (technical expert) for the following areas:
      • Electrical Wiring and Harness Design
        • Wiring standards and ‘best practice’ design
        • Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
        • Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
        • Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
        • Development of configuration managed, electrical harness design packages
        • Parts lists, bill of materials, parts and standards callout
        • Fabrication techniques for integrated wiring assemblies
        • Cost, weight, and schedule trade-offs

      • Wire Diagram and harness drawing generation
        • Interpretation of system interface control data to conceptual schematics
        • Evolution of conceptual schematics into aircraft wiring information
        • Use of wiring design tool to generate wiring diagrams and harness drawings

      • System integration as it applies to complex wiring assemblies
        • Good overall working knowledge of aircraft electrical/electronic systems
        • Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
        • Lightning, EMI, and HIRF considerations
        • Databus and digital equipment interface considerations



    Qualifications
     
    Education, Work Experience, Certification and/or Licensure: 



    • Bachelors’ degree in Electrical Engineering or other directly related technical field from a four year college or university
    • 5 years of directly related work experience or 10 years of directly relevant experience may be considered in lieu of a bachelors’ degree

    Knowledge, Skills and Abilities: 

    • Excellent understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level required
    • Proficiency with Microsoft Office Suite
    • Proficiency in ERP systems preferably SAP preferred
    • Proficiency in Catia V5 and Teamcenter preferred
    • Experience with IGE-XAO, Mentor Graphics, or other similar wiring design tool
    • Experience with electrical harness routing and installation requirements a plus


    Ability to work independently as well as in a multi-functional team environment 


     
    Job Number: 1710069581
    Job Location: Greensboro, NC
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CmauAAC&URLSource=cjhunter

    Electro Mechanical

    Description:
    PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Phoenix AZ. Please contact Tiffany Armour 480-351-2945 or tarmour@pdstech.com 
    Job Responsibilities 
    Perform various technician functions associated with testing a variety of aerospace applications. Typical duties/tasks include: 
    - Set up & operate a variety of test equipment 
    - Test a variety of electronic units using prescribed test procedures 
    - Configure and or verify regular test equipment to fit special tests 
    - Interpret and record test results 
    - Utilize a variety of diagnostic tools to troubleshoot to component level 
    - Recognize and isolate test equipment failures with assistance; generate Test Support Engineering ticket 
    - Perform high potential testing 
    - Read and interpret assembly and test instructions, engineering prints, and schematics 
    - Utilize computer systems (e.g. work instructions, labor charging, prints, and standards) 
    - Process material requisitions in accordance with established procedures 
    - Generate Non-Conforming Material (NCM) reject tags, Unplanned Work Request, and troubleshoot log form 
    - Recognize and take steps to resolve test/work area issues 
    - Maintain accurate records of all work performed 
    - Train other employees and perform other duties as assigned. 
     
    Education 
    •  Associates Degree in related technical field, or equivalent completed education required 


    Experience/Qualifications 

    • Minimum of 1 year direct experience in electronic test and troubleshoot.
    • Good reading, writing & math skills; good computer skills; knowledge of office software apps; understand theory of electronic circuitry & electrical components; ability to read and interpret assembly / test instructions, engineering standards, engineering prints, and schematics.
    • Ability to read and follow written and verbal instructions, use diagnostic and hand tools, effectively communicate & interact with others at all levels, understand and operate electronic test equipment, and handle multiple tasks at the same time. 

     
    Job Number: 1710070627
    Job Location: Phoenix, AZ
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tiffany Armour
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002353CAAQ&URLSource=cjhunter

    Electro Mechanical- Assembler

    Description:
    PDS Tech, Inc. is seeking an Electro-Mechanical for an open position in Phoenix AZ.
    Job Responsibilities 

    • Perform various technician functions associated with testing a variety of aerospace applications. Typical duties/tasks include: 
    • Set up & operate a variety of test equipment 
    • Test a variety of electronic units using prescribed test procedures 
    • Configure and or verify regular test equipment to fit special tests 
    • Interpret and record test results 
    • Utilize a variety of diagnostic tools to troubleshoot to component level 
    • Recognize and isolate test equipment failures; generate Test Support Engineering ticket 
    • Perform high potential testing 
    • Read and interpret assembly and test instructions, engineering prints, and schematics 
    • Utilize computer systems (e.g. work instructions, labor charging, prints, and standards) 
    • Process material requisitions in accordance with established procedures 
    • Generate Non-Conforming Material (NCM) reject tags, Unplanned Work Request, and troubleshoot log form 
    • Recognize and take steps to resolve test/work area issues 
    • Maintain accurate records of all work performed 
    • Train other employees and perform other duties as assigned. 

    Education 
    • Associates Degree in related technical field 

    Experience/Qualifications 

    • Minimum 1 years direct experience in electronic test and troubleshoot.
    • Good reading, writing & math skills; good computer skills; knowledge of office software apps; understand theory of electronic circuitry & electrical components; proficient in reading and interpreting assembly / test instructions, engineering standards, engineering prints, and schematics.
    • Ability to read and follow written and verbal instructions, use diagnostic and hand tools, effectively communicate & interact with others at all levels, understand and operate electronic test equipment, and handle multiple tasks at the same time.

     
    Job Number: 1710074433
    Job Location: Phoenix, AZ
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tiffany Armour
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023InKAAU&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Mechanical Design Engineer

    Description:
    Seeking an Electromechanical Design Engineer (4) for an opening in Orlando, FL.

    RESPONSIBILITIES:
    -An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
    -Additional duties include investigation of discrepant hardware and test anomalies.

    REQUIRED EXPERIENCE:
    Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design Proficiency with Creo Parametric 2.0 Cabling and Intralink.
    Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
    Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
    Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel) Compliance to quality and safety policies at all times.
    Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

    PREFERRED EXPERIENCE:
    Experience with design of flexible and semi-rigid RF cables

    ADDITIONAL EXPERIENCE:
    Design Engineer
    Creo
    Cabling
    ASME/ANSI
    Reading Schematics:

    Excel
    Microsoft Office
    Word
    Analog Silicon
    APQP
    Documentation
    Ground Support Equipment
    Missile
    Parametric
    Rack Design
    RF
    Schematics
    Wiring
    English: Read, Write, and Speak

    EDUCATION:
    Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

    WORK HOURS:
    Full-Time
     
    Job Number: 165645
    Job Location: Orlando, FL
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 10/06/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065209
    Job Location: Phoenix, AZ
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065207
    Job Location: Los Angeles, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065205
    Job Location: San Diego, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065208
    Job Location: Houston, TX
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065206
    Job Location: San Jose, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

    Electro-Mechanical Engineer - Level 3- SECRET

    Description:
    PDS Tech, Inc. is seeking a ElectroMechanical Engr - Level 3 for an open position in Orlando, FL.
    Job Description: 
    • Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support.
    • Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system.
    • General qualifications: Researches, develops, and designs component, equipment, and networks for military applications.
    • Candidate must have experience CCA and PWB design as well as the associated components and connectors. 

    Mandatory Skills:
    • Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software, must be able to obtain a security clearance. 



    Desired Skills:

    • CREO, 

     
    Job Number: 1710071758
    Job Location: Orlando, FL
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238uxAAA&URLSource=cjhunter

    ElectroMechanical Engineer - Level III

    Description:
    ElectroMechanical Engineer - Level III

    Orlando, FL
    $53.00/Hr
    1 Year Contract

    MUST HAVE AN ACTIVE SECRET CLEARANCE

    1st Shift


    Description

    Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


    Skill/Experience/Education

    Mandatory:

    Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

    Desired:

    CREO,
     
    Job Number: 7719
    Job Location: Orlando, FL
    Rate: 53.00/Hr
    Per Diem: Possible Split
    Overtime: Possible
    Duration: 1 Year
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: brad@inconen.com
    Website: www.inconen.com

    ElectroMechanical Engr - Level 3 (4) - FL-C

    Description:
    Chipton-Ross is seeking a ElectroMechanical Engr - Level 3 (4) for an opening in Orlando, FL.

    RESPONSIBILITIES:
    Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.

    REQUIRED EXPERIENCE:
    Proficient with Pro-E and/or Creo or Catia software.

    PREFERRED EXPERIENCE:
    CREO

    EDUCATION:
    Candidate must have a Bachelors degree from an accredited college in a related discipline,

    WORK HOURS:
    9/80, 1st Shift, Full-Time
     
    Job Number: 164610
    Job Location: Orlando, FL
    Rate: Up to $53.00 DOE
    Duration: 12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ElectroMechanical Engr - Level 3 with active secret / CREO FL

    Description:
    Requirement #MFC-REQ-1452
    Work Location Orlando, FL (5600 Sand Lake Rd. Orlando, FL 32819, Orlando, Florida )
    Work Week 9/80

    Needed Date 08/14/2017
    End Date 08/13/2018
    Number of Resources 4
    Security Clearance Secret



    Title: ElectroMechanical Engr - Level 3

    Description
    Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.

    Skill/Experience/Education

    Mandatory:

    Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software, Must have security clearance

    Desired:

    CREO

    Interview Required Yes
    Max Pay Rate 53.00 USD
    Shift 1st Shift
    OT Allowed Yes (OT Limitation: No)
    Travel No
    Non-Exempt
     
    Job Number: JE-1452
    Job Location: Orlando, FL
    Rate: 53/hr max
    Duration: 12 month contract
    Input Date: 10/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electromchanical Design Engineer (4) - FL

    Description:
    Chipton-Ross is seeking an Electromechanical Design Engineer (4) for an opening in Orlando, FL.

    RESPONSIBILITIES:
    -An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
    -Additional duties include investigation of discrepant hardware and test anomalies.

    REQUIRED EXPERIENCE:
    Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design Proficiency with Creo Parametric 2.0 Cabling and Intralink.
    Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
    Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
    Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel) Compliance to quality and safety policies at all times.
    Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

    PREFERRED EXPERIENCE:
    Experience with design of flexible and semi-rigid RF cables

    ADDITIONAL EXPERIENCE:
    Design Engineer
    Creo
    Cabling
    ASME/ANSI
    Reading Schematics:

    Excel
    Microsoft Office
    Word
    Analog Silicon
    APQP
    Documentation
    Ground Support Equipment
    Missile
    Parametric
    Rack Design
    RF
    Schematics
    Wiring
    English: Read, Write, and Speak

    EDUCATION:
    Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

    WORK HOURS:
    Full-Time

     
    Job Number: 165645
    Job Location: Orlando, FL
    Rate: $DOE
    Duration: 12 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: daubert@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electromechanical Design Engineer

    Description:
    Electromechanical Design Engineer

    Location: Orlando, FL
    Pay Rate: DOE ($40/hr - $55/hr)
    Duration: 1 year W2 contract
    Shift: Regular 5/40 schedule
    **MUST be a U.S. CITIZEN**

    Duties:
    -An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
    -Additional duties include investigation of discrepant hardware and test anomalies.

    Required Skills:
    -Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
    -Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
    -Proficiency with Creo Parametric 2.0 Cabling and Intralink.
    -Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
    -Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
    -Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
    -Compliance to quality and safety policies at all times!
    -Must be a US Citizen
    -Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

    Desired:
    -Experience with design of flexible and semi-rigid RF cables

    Education:
    -Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

    Skills Required:
    DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

    Additional:
    EXCEL MICROSOFT OFFICE WORD ANALOG SILICON APQP DOCUMENTATION GROUND SUPPORT EQUIPMENT MISSILE PARAMETRIC RACK DESIGN RF SCHEMATICS WIRING
     
    Job Number: 8047
    Job Location: Orlando, FL
    Rate: 40-55
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 10/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electronic Assembler - AZ

    Description:
    Chipton-Ross is seeking an Electronic Assembler for an opening in Phoenix, AZ.

    RESPONSIBILITIES:
    ACSS manufacturing is a diverse, team based production area, utilizing Lean Manufacturing principles.

    REQUIRED EXPERIENCE:
    -Candidate must be able to assemble electronic subassemblies and final assemblies, using both written and paperless work instructions. Candidate is expected to perform all product build processes and work on any product directed by management to meet business needs.
    -The candidate must have a strong work ethic along with the flexibility and the interpersonal skills to work within a teaming environment. Candidate must be available to work 2nd shift to meet business needs and available to work overtime when required. Candidate must be able to both use and work in an environment where typical chemicals that are found in an electronics production environment are utilized.
    -Candidate must possess basic computer skills and a working knowledge of windows based programs such as Word, Excel and Outlook. Industry standard solder skills are required. Successful candidate will receive internal training if necessary and will be required to pass IPC A610 and JSTD 001 solder and rework certification tests. Current certification to IPC A610 and JSTD 001 are preferred. The position requires the ability to read and understand Engineering drawings as well as manufacturing work instructions. Previous work experience assembling mechanical and electronic assemblies is required.

    PREFERRED EXPERIENCE:
    -Awareness of aviation products and specifications is a plus. Rework skills are required on electronic assembly and circuit card assembly. Current ACSS product build process knowledge and experience is desired including conathane, pro-seal, end item assembly, and component rework- including BGA rework.
    -Experience with Microscope assembly work, X-RAY and Air VAC Rework stations would be a plus. General knowledge of Lean or demand flow manufacturing practices would be helpful.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80, 1st Shift, Full-Time

     
    Job Number: 165147
    Job Location: Phoenix, AZ
    Rate: Up to $15.00 DOE
    Duration: 3 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Kristie Hardage
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: knguyen@chiptonross.com
    Website: www.chiptonross.com

    Electronic Assembler 3

    Description:
    PDS Tech, Inc is seeking a candidate for the Electronic Assembler 3 position located in Redondo Beach, CA.  
    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, rack and stack and cables.
    Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
    Makes continuity checks on work in process and completed.
    May conduct quality inspections on processing line in accordance with quality specifications.
    May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Basic Qualifications:


    Typical Education / Experience
    - High School and 4 years additional education or AA Degree.
    - Skilled at working from blueprints and engineering drawings.

    - Experience Soldering connections, Familiar with IPC standards.



    - Previous Mechanical assembly experience building drawer assemblies required.



    - Use of general hand tools ( electric screwdrivers, crimpers, wrenches)  




    Preferred Qualifications: - Secret SCI Clearance/ or ability to obtain a Secret SCI Clearance.


     
    Job Number: 1710074242
    Job Location: Redondo Beach, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ramon Quintana
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IHeAAM&URLSource=cjhunter

    Electronic Assembler 4

    Description:
    PDS Tech, Inc is seeking a candidate for the Electronic Assembler 4 position located in Redondo Beach, CA.  
    • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, rack and stack and cables.
    • Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
    • Makes continuity checks on work in process and completed.
    • May conduct quality inspections on processing line in accordance with quality specifications.
    • May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Basic Qualifications:


    Typical Education / Experience
    - High School and 6 years additional education and/or AA Degree in related discipline and 3 years of related experience.
    - Skilled at working from blueprints and engineering drawings.

    - Experience Soldering connections, Familiar with IPC standards.



    - Previous Mechanical assembly experience building drawer assemblies required.



    - Use of general hand tools ( electric screwdrivers, crimpers, wrenches).



    - Ability to work unsupervised and make accurate decisions.



    -  Proactive in asking questions and seeking answers from all levels of engineers.



    -  Skilled at multitasking and taking on a role from beginning to end. 



    -  Willingness to go above and beyond what is required of the role. 



    -  SME in electro-mechanical assemblies. 



    -  Willing to work overtime.     




    Preferred Qualifications: - Secret SCI Clearance/ or ability to obtain an SCI Secret Clearance. 


     
    Job Number: 1710074249
    Job Location: Redondo Beach, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ramon Quintana
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IISAA2&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Assemblers - Redondo Beach, CA

    Description:
    STS AeroStaff Services now offers Electronic Assembler jobs in Redondo Beach, California!

    Job Duties:

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, rack and stack and cables
    Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws
    Makes continuity checks on work in process and completed
    May conduct quality inspections on processing line in accordance with quality specifications
    May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
    Basic Qualifications:

    High School and 4 years’ additional education or AA Degree
    Skilled at working from blueprints and engineering drawings
    Experience Soldering connections
    Familiar with IPC standards
    Previous Mechanical assembly experience building drawer assemblies required
    Use of general hand tools (electric screwdrivers, crimpers, wrenches)
    Preferred Qualifications:

    Secret SCI Clearance, or ability to obtain a Secret SCI Clearance
    What We Offer:

    STS AeroStaff Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

    If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
     
    Job Number: 40242
    Job Location: Redondo Beach, CA
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 09/29/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Electronic Assemblers Needed in Redmond, WA

    Description:
    PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
     Seattle_wa@pdstech.com

    Some of your responsibilities as an Assembler will include:
    • Assemble fabricated parts at floor stations. 
    • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
    • Use hand tools and power tools to assemble units according to product specifications.
    • Identify units that fail tests or tolerance levels and repair as necessary.
    • Specific tools used will be tweezers, vacuum wands and torque drivers.


    These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

    All shifts are available.

      


     
    Requirements:
    • Experience working with microscope and microscopic components.
    • Soldering skills and experience.
    • Basic computer skills.
    • High school diploma or its equivalent.
    • US citizen or permanent resident.
    • English language comprehension and communication abilities.

     
    Job Number: 1710071348
    Job Location: Redmond, WA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 12720 GATEWAY DR S STE 102
    City, State: TUKWILA, WA 98168-3333
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237QZAAY&URLSource=cjhunter

    Electronic Assemblers Needed in Redmond, WA

    Description:
    PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
     
    Some of your responsibilities as an Assembler will include:
    • Assemble fabricated parts at floor stations. 
    • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
    • Use hand tools and power tools to assemble units according to product specifications.
    • Identify units that fail tests or tolerance levels and repair as necessary.
    • Specific tools used will be tweezers, vacuum wands and torque drivers.


    These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

    All shifts are available.

      


     
    Requirements:
    • Experience working with microscope and microscopic components.
    • Soldering skills and experience.
    • Basic computer skills.
    • High school diploma or its equivalent.
    • US citizen or permanent resident.
    • English language comprehension and communication abilities.

     
    Job Number: 1510015749
    Job Location: Redmond, WA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

    Electronic Flight Control System

    Description:
    PDS is seeking a Flight Control Engineer for an open position in Stratford, CT.
    Responsibilities include working system integration lab schematics and test procedures.

     



    - BS in Electrical, Robotics, or Aerospace engineering.
    - Coursework in controls or robotics engineering is preferred.
     




     
    Job Number: 1710063421
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GAvTAAW&URLSource=cjhunter

    Electronic Flight Control System

    Description:
    PDS is seeking a Flight Control Engineer for an open position in Stratford, CT.
    Support the design and test of electronic flight control systems.

     
    Experience with Mat Lab, Doors, and Engineer Test Procedures is required. Individual should be able to develop flight control algorithms utilizing Mat Lab toolset
     
    Job Number: 1610058894
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FmsaAAC&URLSource=cjhunter

    Electronic Installer 1

    Description:
    PDS Tech, Inc is seeking a candidate for the Electronic Installer 1 position located in St. Rose, LA. 
    • Assists with routine equipment installation, trial runs and service activity runs to ensure that it meets specifications.
    • Provides assistance with training customers to maintain and adjust routine equipment.
    • Performs routine maintenance on tools, test equipment, etc. and completes required service or systems paperwork.
    • Assists with responding to routine service or systems calls. 
    • Performs or assists with installation and checkout of electric and electronic components for systems and service installed jobs and service agreements associated with automatic building controls systems, fire management, security CCTV, audio and energy management systems. 
    • Installs or assists with the installation of conduit, wire, cable, equipment, components and devices associated with fire, security, and energy management systems.
    • Installs and mounts electric / electronic controls, devices, panels, sensors and components.
    • Performs interlock wiring, wiring check out and assists with system start up. 
    • Coordinates with or advises supervision about requirements for material and supplies to ensure timely delivery to job site. 

    Knowledge, Skills, and abilities:
    High School diploma or GED.
    Associates degree or other technical training and mechanical aptitude preferred.
    Good verbal and written communication skills.
    Must be physically able to climb, work in high and or confined spaces.
    Must not be color blind.
    QualificationRating
    Must Have
    Education
    HS *Yes
    Industrial
    LIFT-MODRT *
         

      and 0 Yrs.
    Industry
    I-INSTRMNT
         

      and 2 Yrs.
    Nice to Have
    Industrial
    ELECT-TRAD
         

      and 2 Yrs.
    Industry
    I-HVAC
         

      and 2 Yrs.

     
    Job Number: 1710071867
    Job Location: Saint Rose, LA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Israel Ireneo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239EmAAI&URLSource=cjhunter

    Electronic Test Technician

    Description:
    PDS Tech is seeking a candidate for the Electronic Test Technician position located in McClellan, CA.  
     Performs routine test functions related to the support of activities such as design, test, checkout, fabrication, modification, and assembly of circuit card assemblies and subassemblies. Applications may include RF analog, digital and/or video type circuits.
    Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, troubleshooting, prototype building, environmental testing, and simple developmental engineering tasks.
    Performs routine operational tests and fault isolation on circuit card assemblies and subassemblies to ensure conformance with design specifications.
    Diagnoses and isolates malfunctions down to component level.
    Conducts defined engineering tests and collects data as assigned. 
    EXPERIENCE and TRAINING: Electronics training equivalent to 2 years technical trade school or military technical school. 
      
    Job Requirements: 
    HS diploma/equivalent required. 
    Good organizational and record keeping skills. 
    Experience in electronics industry and electronics testing. 
    Documents issues to improve operating procedures. 
    Technical training in electronics technology a plus. 
    Utilizes routine development or diagnostic equipment including oscilloscope, VOM, DVM, signal generators, network analyzers, spectrum analyzers and similar test apparatus. 
    Ability to get a Top Secret/SCI clearance a plus.
     
    Job Number: 1710070199
    Job Location: Mcclellan, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CqVbAAK&URLSource=cjhunter

    Electronic Troubleshooter

    Description:
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
     
    Job Number: 1710066458
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

    Electronics Assembler (3) - MD

    Description:
    Chipton-Ross is seeking an Electronics Assembler (3) for an opening in Millersville, MD.

    Under the direction and guidance of the Production Supervisor, the Electronics Assembler, routes, wires, assembles and installs electrical and electronic components in military sonar systems and commercial equipment according to specifications, using fixtures and jigs, hand tools and equipment. Reads work instructions, drawings and specifications to determine assembly methods. Solders surface mount components to printed wiring using microscopes and hand soldering devices.

    RESPONSIBILITIES:
    1. Responsible for assembling and handling products, equipment and materials per engineering and company's quality system procedures.
    2. Perform program specific tasks as required to ensure compliance to individual program requirements.
    3. Assemble printed wiring boards from engineering drawings and sketches using surface mount hardware, soldering irons and microscope.
    4. Cut wire to specified lengths, using wire cutters.
    5. Cut plastic sleeves and slip sleeves over wire ends to insulate connections.
    6. Crimp terminal eyelets and lugs to wire ends, using hand or machine crimping device.
    7. Route, comb, twist, wrap, tie and attach wire to terminal points, according to layout, using soldering iron and hand tools.
    8. Connect wiring to accessories, such as connectors, circuit breakers, plugs and switches and install accessory assemblies in electrical or electronic units, using soldering iron and hand tools.
    9. Conducts functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
    10. Pot or encapsulate electrical and electronic components and assemblies.
    11. Follow company procedures for corrective action. Notify Production supervisor if a defect is identified to obtain guidance and assistance in resolving the problem.
    12. Responsible for following procedures for product assembly/fabrication, equipment operation and sound safety requirements as documented in the company's quality system.
    13. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.
    May perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods or otherwise to balance the workload.

    REQUIRED EXPERIENCE:
    -Valid state drivers license.
    1. Ability to speak, read and write the English language.
    2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
    3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
    4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
    5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

    ADDITIONAL EXPERIENCE:
    1. Exerts up to 20 to 50 lbs. of force occasionally, or up to 10 to 25 lbs. of force frequently, or up to 10 lbs. of force constantly to move objects.
    2. Excellent manual dexterity is required to operate the technical instruments and equipment appropriate to assembly.
    3. Employee regularly sits while using upper body movements including arms, hands and fingers constantly in handling tools and equipment necessary to assemble and install electrical and electronics components in military sonar systems and commercial equipment. Also, working on computers and other office equipment.
    4. Employee occasionally stands and/or walks and reaches with hands and arms in moving tools, equipment and/or products.

    Other Work Conditions and Requirements:

    1. Employee works in a quiet to moderately noisy environment.

    Network Analysis:
    1. Directly provides support to the Engineering and Operations Departments.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80, Full-Time

     
    Job Number: 165516
    Job Location: Millersville, MD
    Rate: Up to $20.00 DOE
    Duration: 3 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Electronics Assembler (6) - RI

    Description:
    Chipton-Ross is seeking an Electronics Assembler (6) for an opening in Ashaway, RI.

    Under the direction and guidance of the Production Supervisor, the Electronics Assembler, routes, wires, assembles and installs electrical and electronic components in military sonar systems and commercial equipment according to specifications, using fixtures and jigs, hand tools and equipment. Reads work instructions, drawings and specifications to determine assembly methods. Solders surface mount components to printed wiring using microscopes and hand soldering devices.

    RESPONSIBILITIES:
    Essential Functions:
    1. Responsible for assembling and handling products, equipment and materials per engineering and company's quality system procedures.
    2. Perform program specific tasks as required to ensure compliance to individual program requirements.
    3. Assemble printed wiring boards from engineering drawings and sketches using surface mount hardware, soldering irons and microscope.
    4. Cut wire to specified lengths, using wire cutters.
    5. Cut plastic sleeves and slip sleeves over wire ends to insulate connections.
    6. Crimp terminal eyelets and lugs to wire ends, using hand or machine crimping device.
    7. Route, comb, twist, wrap, tie and attach wire to terminal points, according to layout, using soldering iron and hand tools.
    8. Connect wiring to accessories, such as connectors, circuit breakers, plugs and switches and install accessory assemblies in electrical or electronic units, using soldering iron and hand tools.
    9. Conducts functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
    10. Pot or encapsulate electrical and electronic components and assemblies.
    11. Follow company procedures for corrective action. Notify Production supervisor if a defect is identified to obtain guidance and assistance in resolving the problem.
    12. Responsible for following procedures for product assembly/fabrication, equipment operation and sound safety requirements as documented in the company's quality system.
    13. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

    REQUIRED EXPERIENCE:
    Certificates and Licenses Required:
    -Valid state drivers license.
    Knowledge, Skills and Abilities:
    1. Ability to speak, read and write the English language.
    2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
    3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
    4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
    5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

    ADDITIONAL EXPERIENCE:
    1. Ability to speak, read and write the English language.
    2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
    3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
    4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
    5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

    Physical Demands:
    1. Exerts up to 20 to 50 lbs. of force occasionally, or up to 10 to 25 lbs. of force frequently, or up to 10 lbs. of force constantly to move objects.
    2. Excellent manual dexterity is required to operate the technical instruments and equipment appropriate to assembly.
    3. Employee regularly sits while using upper body movements including arms, hands and fingers constantly in handling tools and equipment necessary to assemble and install electrical and electronics components in military sonar systems and commercial equipment. Also, working on computers and other office equipment.
    4. Employee occasionally stands and/or walks and reaches with hands and arms in moving tools, equipment and/or products.

    Other Work Conditions and Requirements:
    1. Employee works in a quiet to moderately noisy environment.
    Network Analysis:
    1. Directly provides support to the Engineering and Operations Departments.
    Scope information:

    PREFERRED EXPERIENCE:
    Experience preferred in related field, but not necessary.


    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80, Full-Time
     
    Job Number: 164681
    Job Location: Ashaway, RI
    Rate: $15 to $22.00 DOE
    Duration: 2 Months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Christian Martinez-Salceda
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cmartinez@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Systems Engineer

    Description:
    Unique Skills:
    Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Duties and Responsibilities:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-162
    Job Location: Savannah, GA
    Rate: $58-$63/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASASP
    Input Date: 10/30/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Electronics Technician

    Description:
    Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

    Description
    Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

    Skill/Experience/Education
    Mandatory:
    Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

    Desired:
    Schematic capture, design verification and simulation.
     
    Job Number: 165226
    Job Location: Santa Barbara, CA
    Rate: $DOE
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Brent Sizemore
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bsizemore@chiptonross.com
    Website: www.chiptonross.com

    Electronics Technician Maintenance I

    Description:
    PDS Tech, Inc.  is seeking an Aircraft Electronics Technician for an open position in Lexington, KY.
    Job Description: 
    • Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment.
    • Fabricate harness and electrical assemblies.
    • Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish work.
    • Work under close supervision receiving technical guidance from supervisor or higher-level technician.
    • Work is checked frequently for accuracy.
    • Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools and applicable test equipment.
    • Experience in utilizing electrical test equipment such as digital multi-meters and oscilloscopes.
    • Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals.

    Mandatory Skills:
    • Minimum 3 years’ experience installing and testing of aircraft electrical / avionics systems.
    • Successful completion of a military or civilian equivalent electrical / avionics training course.
    • Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    • Documented Military/DOD Service School or Civilian/FAA equivalent training desired<br/>

     
    Job Number: 1710073005
    Job Location: Lexington, KY
    Per Diem: No
    Duration: 3 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EjMAAU&URLSource=cjhunter

    Engineering Technician (2) - OH

    Description:
    Chipton-Ross is seeking an Engineering Technician (2) for an opening in Mason, OH.

    Client is seeking a passionate, highly motivated Engineering Technician for the Test Engineering Group. The selected Individual will assemble, document and verify Test cables, Circuit Card Assemblies, Test boxes and Test Stations as required. This individual will also troubleshoot, repair and perform preventative maintenance on deployed test equipment throughout the building.

    RESPONSIBILITIES:
    o Complete Assigned Tasks within Allotted schedules and budgets.
    o Possess strong computer skills, i.e. setting raid drives, cloning, software installation, PCI card installations, and other operational and repair tasks.
    o Intermediate skills with Microsoft office skills, i.e. Excel, Access, etc.
    o Ability to use internet to research new parts, find datasheets, verify part number and part descriptions, new tool requirements, finding replacements for obsolete parts, etc.
    o Provide weekly Status on all assigned Tasks.
    o Provide Timely inputs for new project estimations. (As requested)
    o Review and Redline Drawings as requested.
    o Write and Submit ECN's as required.
    o Support all areas of Test Engineering as required. (Assembly, Support, Design and Special Projects)
    o Assemble, Document and Verify Test Equipment, Test Cables and Circuit Card Assemblies.
    o Alpha and Beta Test Software as required.
    o Read and Interpret Schematics, Drawings, Technical data sheets and Test plans.
    o Troubleshoot complex Electronic Circuits using test equipment such as Power Supplies, multi-meters, scopes, signal generators, data loggers..etc.
    o Build Proto-type/breadboard Electronic circuit boards.
    o Generate reports, spreadsheets, parts Lists, schematics and block diagrams.
    o Using hand and Power tools for Drilling, cutting, filing and Assembly

    REQUIRED EXPERIENCE:
    o 5 years of experience directly related in: Electronics Assembly and Repair
    o Prior Experience in engineering and manufacturing environment.
    o Experience in Aerospace Industry is Plus, but not required.
    o Experience with Labview or National Instruments Test Stand is a Strong Plus.
    o Experience with Schematic entry, PCB design and modeling software is a strong plus. (OrdCAD, DxDesigner, PADs, PCB-123, AutoCAD, SolidWorks, etc)
    o Experience with metal fabrication is a plus
    o Experience with J-standard (with Space addendum) solder certification and ability to pass peer evaluations
    o Metal fabrication experience is desirable
    Travel
    o Must be able to travel up to 10% of the time
    o Work Environment And Physical Demands
    o Lab Environment. (Work Station will be provided in Test Engineering Lab)
    o Physical Demands: standing, sitting, crouching/kneeling, soldering, working with Micro-scopes, Working with hand/Power tools, etc.

    EDUCATION:
    o Associate's Degree from an accredited two year technical school or Military School equivalent is required

    WORK HOURS:
    9/80, 1st Shift, Full-Time

     
    Job Number: 165610
    Job Location