Job Search Results

479 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/10/28 Thursday 03:58AM Pacific Time by ContractJobHunter. )

Listings 1 - 479

Go To My Job Tracker

Expand all descriptions

10 - Structural Analysis Engineers - Level 2 & 3 Openings

Description:
We have 10 contract Stress Analysis Engineer positions in Berkeley, MO.  The manager prefers people onsite.
Duration is 8-months+

5 Structural Analysis Level 2 Needed
&
5 Structural Analysis Level 3 Needed

• Experience performing analysis on primary and secondary structure and/or systems installations
• Experience with Nastran/Patran and/or Hypermesh desired
• Able to perform classical hand analysis
• Experience writing strength notes
• Experience working on military aircraft programs preferred
• BS in Engineering + 2 or more years of related experience.

Develops, integrates and documents structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general direction.

The Structures Company LLC is an AA/EOE
 
Job Location: Berkeley, MO
Rate: $60-72/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

3 Manufacturing Engineer II Needed

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $27-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

6 Aircraft Stress Engineers with Strong Composites

Description:
Stress Engineers with Composites needed in Mojave, CA.
MUST BE US Persons
Must be good with composites
FEMAP is a huge plus

Basic Qualifications
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR
Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/14/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

6 Structural Design Engineers Needed

Description:
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

1. Generates engineering models, drawings, parts list and EO utilizing CATIA V5
2. Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
3. Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
4. Familiarity with structural analysis methods, load paths, and material properties
5. Manages task execution to ensure on-time and on-target completion
6. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
7. Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
8. Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
9. Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions
Education, Work Experience, Certification and/or Licensure:

1. Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
2. Minimum of 5 years of primary and secondary structural design experience
3. Must possess a minimum of 2000 hours of experience with Catia V5

Knowledge, Skills and Abilities:

1. Knowledge of AMSE Y14.5 dimensioning and tolerancing
2. Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
3. Experience with Catia V5
4. Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
5. Proficient in Microsoft Office Products


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided 'reach assistance technology' or 'movement assist technology' (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 510
Job Location: Greensboro, NC
Rate: $55-$66/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 09/28/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

8 Electrical Engineers Needed w/ AutoCAD

Description:
• Experience with AutoCAD
• Must have aircraft experience
• Experience with modification special mission work, radio integration and sensor integration.
• Must be US Citizens




The Structures Company LLC is an AA/EOE.
 
Job Number: 486
Job Location: Denver, CO
Per Diem: Possible
Duration: 6 Months - Possibly Longer
Start Date: ASAP
Input Date: 08/16/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
PDS Tech is seeking an A&P Mechanics in Indianapolis, IN

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during the performance of maintenance duties. Assists in the cleaning of parts and components during the repair and assembly of aircraft. Performs other tasks and duties associated with the aircraft operation
High school education or equivalent required • A&P License is required. • Experience or working knowledge of mechanical devices. Prefer basic knowledge of aircraft systems
Experience on mechanical repair of vehicles, preferably aircraft –through technical training, apprenticeship, schooling, or similar experience is preferred.

Must be able to obtain and maintain an airport security badge through the local airport authority, if applicable.
 
 
Job Number: 2110127846
Job Location: INpolis, IN
Duration: 3 months
Input Date: 08/11/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pcq9QAC&URLSource=cjhunter

A&P Mechanic

Description:
An A&P Mechanic job in Fort Worth, TX is currently available through Belcan. If you are interested in career growth, company stability with a ton of learning opportunity this is the job for you. In this role, you will be responsible to carry out assigned tasks, in accordance with the applicable maintenance manual, ensure maintenance operations are performed in the appropriate sequence as determined by the application maintenance data. To be considered for this role, you will need to have been a licensed mechanic for at least 1 year with 10-15 years of experience or 5-6 years experience with Falcon and Gulfstream aircraft.

JOB TITLE Job duties:

* Ensure that inspections are requested in an orderly and timely manner, and that the maintenance activities are performed according to the appropriate maintenance data.
* Ensure that tools and equipment used to make airworthiness determinations are labeled as calibrated and are within date limits in accordance with the manual
* Complete the appropriate paper work accurately
* Must have A&P License
* Minimum 1 year experience and have FAA Airframe rating
* Or 3 years minimum experience with Falcon 50, 90, 2000 and/or IAI G100, G150 G200 GIV
* Must have at least 10 years experience or 5-6 years experience with Falcon and Gulfstream aircraft.


If you are interested in this A&P Mechanic job please apply via the apply now link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 314932
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/04/2021
Last Updated: 10/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=314932&job_number=314932

A&P Mechanics - Secret Clearance (S-92 / Blackhawk experience)

Description:
PDS Tech is seeking A&P Mechanics with Secret Clearance and S-92 / Blackhawk experience for open positions in Owego NY

The ideal candidate will assist in the planning for accomplishing periodic Preventative Maintenance and Inspections

Requirements:
  • A&P Mechanic with S-92 / Blackhawk experience
  • Must have rotary aircraft structures experience preferably on Sikorsky products


The ideal candidate will:

  • Establish trends for overhaul and major repairs needed for planning and scheduling
  • Identify unscheduled maintenance plans and avoidances
  • Address stocking of maintenance spares required to timely maintain common fleet
    component failures
  • Implement plans for correction of known discrepancies categorized into; immediate
    action, on availability of parts, and on next planned maintenance.
  • Provide hands-on troubleshooting, requisitioning of repair parts for component failures found in troubleshooting, and installation of corrected components
  • Provide on-the-spot hands-on expertise needed to resolve technical problems
    incidental to the operation of aircraft
  • Establish best approach for corrosion prevention techniques
    Provide end-to-end supply chain review ensuring cost effective options are made available for customers' consideration of stocks and repairs
  • Improve readiness with test, measurement, and diagnostic equipment required for
    ensuring uncompromising quality
  • Execute VH-92A Presidential Helicopter Program production structural modifications
  • Provide other ad-hoc production support as required


 
Job Number: 2110132620
Job Location: Owego, NY
Duration: 15 months
Input Date: 06/09/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqDRQA0&URLSource=cjhunter

Administrative Staff, Manufacturing

Description:
PDS Tech is currently recruiting for an Administrative Staff Representative (Manufacturing)  to work in Greensboro, NC!

The Administrative Staff will be responsible for providing administrative support to the Manufacturing department management team, department team members, and executive leadership as assigned.

Duties and Responsibilities:
  • Maintains the calendar of the department leader(s), ensuring that all appointments and meetings are clearly always documented and are up to date (times, locations, nature of appointment / meeting). 
  • Tracks the status of compiles and reports company data including department goals, benchmarks, achievements, and other data as needed. 
  • Prepares presentation materials for the department or department leader(s) including spreadsheets, reports, presentations, technical papers etc. 
  • Develops internal communications relevant to the department, as directed by the department senior leader. 
  • Manages small projects including initiation, planning, execution, monitoring, completion, and evaluation. 
  • Organizes and coordinates departmental activities and events including placing catering orders, setting up, and cleaning afterward.  Adheres to the budget or guidelines established by the department leadership regarding expense budget, type of food for catering etc. 
  • Coordinates travel including booking travel tickets and accommodations, researching, and securing appropriate travel visas, and processing expense reports as needed for the department management team. 
  • Applies his/her knowledge of departmental functions to offer ideas for administrative process improvements, increased project quality, or cost saving /efficiency measures to the team and management. 
  • Meets multiple concurrent deadlines and remains task oriented.  Continuously reprioritizes daily tasks and projects to ensure that the most business critical are completed successfully first and within set deadlines.
  • Handles sensitive or confidential data in a professional manner respecting policies, protocols, and requirements for confidentiality and/or discretion.
  • Functions as a professional representative of his/her team when interfacing with others within and outside of the department.
  • Maintains a high level of responsiveness to team needs by demonstrating excellent attendance and productivity, including arriving on time for scheduled shifts, remaining focused and attentive throughout the entire work shift, and working overtime as instructed by management. 


 
Education, Work Experience, Certification and/or Licensure:
  • Associate degree in Business Administration or related field strongly preferred.
  • At least 3 years of prior corporate work experience in an Administrative Assistant or Executive Assistant role within an international corporate setting is required.  Prior experience in an administrative role serving a diverse, multi-national employee population is highly desired.
  • Prior work experience in the field of Aviation, Engineering or an R&D setting is highly desired.


Knowledge, Skills and Abilities:

  • Excellent oral and written communication skills.
  • Strong organizational skills.
  • Strong attention to detail.
  • Intermediate to Advanced level proficiency in Microsoft Office – Word, Excel, PowerPoint, Lotus Notes is required.
  • Basic SAP and/or Teamcenter proficiency may be required (dependent upon the needs of the department).
  • Ability to work independently or within a team-oriented environment.
  • Ability to multitask.
  • Ability to display respect for other cultures, customs and norms while interfacing with a diverse management and employee team.
  • Ability to develop positive, effective, and professional working relationships with the department management and team.
  • Ability to utilize problem solving skills and sound judgment.


  • Ability to always conduct oneself in a professional manner.  
  • Ability to display a "team approach" to job duties, proactively volunteering to help when needed although required work may not regularly be part of the Administrative Staff job duties.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift, or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  


 
Job Number: 2110139197
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 09/02/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6BIQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Avionics Technicians

Description:
STS Aviation Services is hiring Aircraft Avionics Technicians in Melbourne, Florida.

Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

Job Duties:
The workload is primarily CRJ C Checks, A320 C Checks as well as a variety of other Installation and Modification programs scheduled to come in over the next year – including WiFi installs, Cockpit Mods, Interior Reconfigurations to name a few.
Qualifications:
The minimum experience requirements are no less than 24 months of applicable experience on Commercial and Large Regional aircraft Repair/Modification/Overhaul.
All technicians must be given the STS Recruiting A&P test or Sheet Metal Test during the screening process, before the candidate is assigned – with a minimum of a 70% score being required for the candidate to be assigned.
The technicians must bring a full set of applicable tools with them on their scheduled start date.
Bonus Information:
$500 travel allowance for those technicians who qualify, tied to 90 day stay.
$500 Referral Fee for anyone the candidate refers, who stays 60 days
Authorization:
All candidates must currently be authorized to work in the United States.
About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

#ZR
 
Job Number: 37938
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Keith Russo
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Machinist

Description:
PDS Tech is seeking an Aircraft Machinist for an open position in New Orleans LA

The ideal candidate will:
  • Follow general instructions,
  • Read and interpret complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines.
  • Develop and revise Machine Control Data (MCD) and geometry.
  • Assist the team in resolving issues and completing job responsibilities.


 
DESIRED COMPETENCIES
  • Accountability and Responsibility - Demonstrate a willingness to accept responsibility and accountability for one's actions.  Exhibit a moral, legal or mental accountability in areas of responsibility.
  • Adaptability - Maintain effectiveness when experiencing major changes in work tasks or the work environment; adjust effectively to work within new work structures, processes, requirements, and/or cultures.
  • Change Management - Encourage others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitate the implementation and acceptance of change within the workplace.
  • Continuous Improvement - Originate action to improve existing conditions and processes; use appropriate methods to identify opportunities, implement solutions, and measure impact.
  • Continuous Learning - Demonstrate an interest in personal learning and development. Seek feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Take steps to develop and maintain the knowledge, skill, and ability to perform.
  • Innovation / Creativity - Discover new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Try different and novel ways to deal with work problems and opportunities.
  • Planning and organizing - Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.
  • Strategic Decision Making - Obtain information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commit to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.
  • Teamwork - Demonstrate a commitment to the mission and motivation to combine the team’s energy and expertise to achieve a common objective. Understand the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrate ability to work as a member of a team.


DESIRED TECHNICAL COMPETENCIES

  • Adhesive Materials/Processes - Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.
  • Engineering Drawings & Specs - Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

    Facilities Manufacturing Processes - Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.
  • General Shop Processes - Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
  • General/Precision Test & Measurements - Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.
  • Manufacturing Methods - Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.
  • Materials & Processing - Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).
  • Numerical Control Programming - Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).
  • Polymers & Composite Materials - Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).
  • Systems Thinking - Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.


 


 
 
Job Number: 2110138871
Job Location: New Orleans, LA
Duration: 6 months
Input Date: 09/06/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j568QAA&URLSource=cjhunter

Aircraft Machinist C

Description:
Chipton-Ross is seeking 2 Aircraft Machinist C's for an opportunity in New Orleans, LA.

RESPONSIBILITIES:
JOB DESCRIPTION SUMMARY
Follows general instructions, reads and interprets complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines. Develops and revises Machine Control Data (MCD) and geometry. Assists the team in resolving issues and completing job responsibilities.

DESIRED COMPETENCIES
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.

Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the teams energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

DESIRED TECHNICAL COMPETENCIES
Adhesive Materials/Processes
Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.

Client Knowledge
Knowledge of Client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Facilities Mfg Processes
Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.

General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).

General/Precision Test & Meas
Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.

Manufacturing Methods
Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.

Materials & Processing
Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).

Numerical Control Programming
Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).

Polymers & Composite Materials
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

Systems Thinking
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

WORK HOURS: 6:00AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 194314
Job Location: New Orleans, LA
Rate: $DOE
Duration: 6 Months
Input Date: 09/09/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 80 Aircraft Mechanic II's located in San Antonio, TX.

RESPONSIBILITIES:
Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
Maintain necessary certifications, licenses and permits as required for assigned work.

REQUIRED EXPERIENCE:
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Experience working as an aircraft mechanic
Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

Currently possess an FAA A&P License or Military Technical School equivalent
Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30PM
 
Job Number: 190853
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 05/04/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 50 Aircraft Mechanic II's located in San Antonio, TX.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.

Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

Maintain necessary certifications, licenses and permits as required for assigned work.

The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

EDUCATION:
Accredited High School Diploma/GED

FULL-TIME/VARIABLE SHIFT
Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

ADDITIONAL INFORMATION:
Program is offering an assignment completion bonus 5,000.00

Program is offer a sign on bonus of 5,000.00 (contingent upon completion/passing of training and PL1 access granted)

Per diem is authorized for structures mechanics only to the amount of $600.00/week

 
Job Number: 192228
Job Location: San Antonio, TX
Rate: $DOE
Duration: 12 Months
Input Date: 07/24/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 40 Aircraft Mechanic II's (Electrical) located in San Antonio, TX.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
Ability and understanding of routing instructions and handling of harnesses.
Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.
Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.
Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.
Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.
Ensure that all equipment is used in accordance with established safety and operating procedures.
Perform all tasks involved in the coordination, preparation, and movement of material and tools.
Operate riding type electric powered elevating equipment to accomplish work assignment.

REQUIRED EXPERIENCE:
Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
Maintain necessary certifications, licenses and permits as required for assigned work.
Will be required to work with the guidance of more senior skilled employees and assist less senior employees.
Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM
 
Job Number: 193360
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 08/25/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Structural

Description:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.

• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

• Maintain necessary certifications, licenses and permits as required for assigned work.

• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
 
Job Number: JPC-1334
Job Location: SAN ANTONIO, TX
Rate: 35-40 HR
Per Diem: YES
Overtime: NO
Duration: 12 MONTHS
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: diego.villegas@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Unique Skills:
• Preference will be given to:
• Candidate with Computer Science degree with some exposure to aerospace, or
• Candidate with Aerospace degree with advanced programming skills
• Advanced programming skills and experience with various programs including Matlab, Python, C, C++
• DO-178 experience highly desired
• Preferred but not required:
• EFB, SCAP experience
• Aircraft Performance background
• Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-492
Job Location: Savannah, GA
Rate: $55-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Aircraft Performance Software Developer 3

Description:
Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14929
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14930
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic)

Description:
PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic) for an open position in Coatesville PA

The ideal candidate will:
  • Inspect aircraft and component parts for structural integrity using nondestructive inspection methods.
  • Interpret nondestructive inspection test results and provide information about defects to repair center.
  • Perform nondestructive inspection on structures, components, and systems.
  • Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, and ultrasonic test equipment.
  • Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
  • Perform the inspection of modification and production aircraft for functional operation and conformance to government and company standards and specifications.
  • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
  • May perform pre-flight and post-flight inspections in accordance with standard procedure on flight-proven aircraft.
  • May inspect any adjustments, repairs, or modifications made on the aircraft.
  • Must be able to work in confined spaces, elevated platforms for an extended period of time.
  • Must be willing to work off-shifts as required.
  • Must be willing and able to lift 30 lbs.

Basic Qualifications:
  • Documented proof of the minimum requirements for:
    • Level II in Fluorescent Penetrant
    • Level II Eddy Current
    • Level II Ultrasonic in accordance with NAS 410.

  • Basic Excel and MS Word Experience, ability to read blueprints.
     

Desired Skills:

  • Any other level II NAS 410 Qualifications.
  • Airframe and Powerplant Certificate preferred.

 
Job Number: 2110127910
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 05/20/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcwqQAC&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structural Assembler-Vertical Lift

Description:
Chipton-Ross is seeking 20 Aircraft Structural Assemblers for an opportunity in Mesa, AZ.

RESPONSIBILITIES:
Structural Assembly Technician

Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems.
Identify nonconforming parts, conditions and manufacturing processes.
Work with engineering to improve manufacturing processes.

EDUCATION:
High School Diploma/Accredited GED.

FULL TIME/VARIABLE SHIFT
WORK HOURS: 5:00AM-1:30PM
Must be available to work 1st or 2nd shift (5am-1:30pm or 1:30-10pm)

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

ADDITIONAL INFORMATION:
Must be available to work 1st or 2nd shift (5am-1:30pm or 1:30-10pm)
Local candidates to Mesa only - onsite role
20 positions
Manager will hire off of resumes
6-12 month long contract
 
Job Number: 192976
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 07/29/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Mechanics

Description:
STS Technical Services is hiring Aircraft Structures Mechanics in Oscoda, Michigan.

Job Description:

The Aircraft Sheet Metal Mechanic repairs, fabricates, modifies, and installs sheet metal parts, items, and assemblies. Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and equipment required in the sheet metal trade, and knowledge of shop mathematics and principles.

Job Responsibilities:
Shoot and buck rivets to specifications following FAA guidelines
Recognize differences in types of metals including structural strength and thickness
Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
Remove existing rivets from aircraft structure
Work with and around a variety of chemicals and follow all OSHA standards in regards to PPE
Build components for aircraft applications using a variety of sheet metal materials
Make decisions regarding how to make repairs and know what repairs can and can’t be done
Understand and apply FAA standards
Read blueprints to ensure build and modification completion, follow both written and verbal instructions
Effectively document job completion paperwork
Other duties as assigned
Job Requirements:
Valid FAA Airframe & Powerplant license strongly preferred
Previous experience working with sheet metal, or completion of a technical school program in a similar field of study
Must provide own tools
Ability to use and effectively manager ERP program, time clock and company intranet
Manage time to effectively meet company priorities
Abilities:
Crawl in and out of tight spaces
Lay in a prone position for more than 4 hours
Comfortably work at elevated heights of at least 40 feet for extended periods of time
Lift balance, and carry 50 lbs.
Work in enclosed hangars and exterior weather conditions
Work in close proximity to other people
Benefits:
A $500 referral bonus if your referral works at least 60 days
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your backyard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36331
Job Location: Oscoda, MI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Mindy Paolini
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technician

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Rates & Bonus:
Our client is now paying $32/hr with a $2000.00 sign on bonus.
Duties & Responsibilities:
Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repairs using test equipment specified in technical manuals.
Completes work package documentation by signing/stamping off after finishing all designated operations.
Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
Provide information and documentation for engineering requests.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
Qualifications:

Education:

High School/ GED
A&P and / or structures experience a plus, or repairman’s certificate may substitute for A&P.

Experience:

Prefer at least 2 years experience.
Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required.
Employees will be subject to the random drug and alcohol testing under FAA regulations.
Valid Drivers License.
Must be able to work in hot/Cold – Indoor/Outdoor.
Must be able to lift up to 50 lbs unassisted.
Must be able to do work above head.
Must be able to work at heights.
Must be able to work in confined spaces.
Must be able to climb.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37622
Job Location: Nashville, TN
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Celeste Rodriguez
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Aviation Services is hiring Aircraft Structures Technicians in Melbourne, Florida.

Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

Requirements & Information:
Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
Previous experience performing C checks is preferred.
Comparable military experience is acceptable.
Candidates must have a valid driver's license.
$500 travel allowance for those technicians who qualify; tied to 90-day stay.
$200 referral fee for anyone the candidate refers who stays 60 days.
Authorization:
All candidates must currently be authorized to work in the United States.
About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

#ZR
 
Job Number: 36451
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Keith Russo
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Technicians Needed

Description:
WE NEED 70 TECHNICIANS TO START ASAP!

Have your friends come with you! Great opportunity with a great aerospace company!

Must have:

5 plus years of experience
Proof of US Persons
Experience working with composite aircraft
Background in one or more of the following: assembly, fabrication, systems, lay-up, build-out, wire harnesses, mechanical, hydraulic and pneumatic systems
A&P preferred, but not required
Per Diem splits available for qualified candidates.

EOE

Job Types: Full-time, Contract

Pay: $32.00 - $43.00 per hour
 
Job Location: Mojave, CA
Rate: 35+
Per Diem: Possible
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Technician Sr

Description:
PDS is seeking an Aircraft Tech Sr  for an open position in Savannah, GA.

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 

Principal Duties and Responsibilities:

Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
7. Coordinate movement of aircraft as required.
8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Functions:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned.



 

Education and Experience Requirements: 



  • High School Diploma or GED required.
  • 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required. Corporate aircraft experience preferred.
  • FAA Airframe and Powerplant Mechanic Certificate required.
  • Valid Driver’s License required.


Unique Skills:



  • Positions posted for Hangar G any shift as determined by Service Team Manager.
  • *Contractor Hired in this role will go through Service Center Standard Onboarding OJT*


 
Other Requirements:
1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.







 

 
Job Number: 2110138189
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/19/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j2JtQAI&URLSource=cjhunter

Aircraft Technician Trainee (Avionics)

Description:
PDS Tech is seeking a Aircraft Tech Trainee for an open position in Savannah, GA.

In your role, you will:

Under direct supervision of the Mechanical Team Lead or Senior Tech, assist with the inspection, maintenance and repair of customer aircraft. In this position, the employee will gain knowledge of and familiarity with the aircraft, with internal procedures for work completion and quality control, and with the ways in which multiple shops must work together to meet production goals.

Essential Functions:
1. Goals of the Aircraft Tech Trainee are to gain experience in the inspection and maintenance of various Gulfstream aircraft systems (airframe structural, electrical, hydraulic, fuel, landing gear, flight controls and rigging, engines, conditioned air, anti-ice, and other sub-systems). Make effective use of technical reference resources (maintenance and repair manuals, wiring diagrams, vendors and manufacturer communiques, etc.) as required. to identify correct part numbers, procedures, and materials. Learn to find information.
2. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete parts change sheets, work order sign-offs, shift turn-overs, and other paper work in a timely manner.
3. Ensure that work accomplished meets FAA requirements, customer specifications, and Gulfstream standard of quality.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Prevent damage to aircraft.
5. Correctly and safely operate ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.).
6. Assist Line Service with the movement and servicing of aircraft. Ensure that parts racks and cages remain near their respective aircraft. Perform other duties as assigned.
 

As our ideal candidate, you will meet the following requirements:
 
Education and Experience Requirements:


  • High School Diploma or GED required.
  • Prior experience with civil or military aircraft avionics systems and/or installation is helpful.


Other Requirements:
1. Strong mechanical aptitude.
2. Enrollment in an Airframe & Powerplant license program preferred.
3. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills.
 
Job Number: 2110138452
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 08/25/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j3VZQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36242
Job Location: Oscoda, MI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Kimberley Ayres
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Technicians

Description:
STS Aviation Services is hiring Airframe & Powerplant Technicians in Melbourne, Florida.

Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

Requirements & Information:
Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
Previous experience performing C checks is preferred.
Comparable military experience is acceptable.
Candidates must have a current and valid A&P certifications along with a valid driver’s license.
$500 travel allowance for those technicians who qualify; tied to a 90-day stay.
$200 referral fee for anyone the candidate refers who stays 60 days.
Authorization:
All candidates must currently be authorized to work in the United States.
About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

#ZR
 
Job Number: 36449
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Keith Russo
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframes Mechanic

Description:
Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulation
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes
Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders.
Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.
Utilizes tools to include but not limited to drills, sanders, angle motors, shears, drill press, special tools, and pneumatic riveter.
Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals.
 
Job Number: CJH A-6258
Job Location: Langley AFB, VA
Rate: $32.64
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (Second Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Flight Test experience.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years' experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 16875
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/09/2021
Last Updated: 09/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler A

Description:
Chipton-Ross is seeking an Assembler A for an opening in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

ADDITIONAL REQUIREMENTS:
- Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.
- Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances
- Safety shoes are required. Completely cover the toes, heels and top of your foot. Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric, Heels are less than 2 inches high and have heel base greater than 1 square inch. Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift. Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 193034
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 08/29/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Assembler A

Description:
Chipton-Ross is seeking 4 Assembler A's located in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

REQUIRED EXPERIENCE:
- Computer literate
- Must be able to read, write and speak English language

Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.

Safety
Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances

Safety shoes are required.
Completely cover the toes, heels and top of your foot.
Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric,
Heels are less than 2 inches high and have heel base greater than 1 square inch.
Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift

Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 190706
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 04/19/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Assembler D

Description:
Chipton-Ross is seeking a Assembler D for an opening in San Antonio, TX.

RESPONSIBILITIES:
Supporting 737 program.

1. Perform production installations, maintenance*, preventative maintenance** and alterations*** on aircraft structure, systems and sub-systems, including electrical and avionics on standard or experimental certificated aircraft. Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

2. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. Perform functions such as: Customer/FAA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. May perform Aviation Maintenance Technician tasks in order to obtain and maintain knowledge, skills and required certifications.

ASSOCIATED DUTIES AND RESPONSIBILITIES:
Use technical specifications, sketches, manuals, drawings, engineering instructions and FAA forms and publications to accomplish work assignment.
Maintains Company and FAA required records and inspection forms.
Maintain a safe, clean and organized work environment.
Plan and organize the sequence of your own work package in such a way as to promote safe, efficient operation and meet predetermined schedules in a timely manner.
Operate any and all types of information systems required to perform assigned tasks. Including but not limited to Company WEB based systems and Microsoft Office products.
Interpret and perform to the requirements of airworthiness directives, service bulletins, service letters and other approved/accepted data.
Apply applicable mathematical calculations to setup and use precision measuring tools, to measure gaps, heights, angles, hole diameters and depths.
Maintain necessary certifications, licenses and permits as required for assigned work.
As assigned, exchange information with suppliers, customers or other company representatives to explain or demonstrate operations, tests or difficulties.

PREFERRED EXPERIENCE:
737 field experience (preflight/post flight) with an avionics background proficient in testing/troubleshooting. Previous engine run experience on CFM type engines and/or flight line experience with an airline/military.. A&P license.


EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 2:30 PM

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

ADDITIONAL REQUIREMENTS:
Candidates selected will attend a 3 week training course prior to working the floor.
 
Job Number: 191111
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 Months
Input Date: 05/06/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Avionic, Structural or Mechanical Helicopter Technicians (2nd shift)

Description:
PDS Tech is seeking Avionic, Structural or Mechanical Helicopter Technicians (2nd shift) for open positions in Owego NY

Selected individuals will be responsible for Aircraft Installations and Testing in support of the VH-92A Helicopter program. This is a Second Shift Position.  Looking for Individuals with Structural, Avionics, and/or Mechanical Backgrounds.



To be qualified to interview for this role, you will need to possess these basic qualifications:

  • Aviation experience required (A&P certificate highly preferred)
  • Able to work in a team environment
  • Ability to adapt to changes
  • Familiarity with S-92 Airframe or Other Sikorsky Platforms
  • Experience with Helicopter Flight Controls & Dynamic Components

Desired Skill pertaining to this role have to do with familiarity / experience of the following type of responsibilities:
  • Performing Production Modifications to base aircraft
  • Performing Standard Aviation Maintenance
  • Installation of Antennas and Avionics Racks, Running Aircraft Harnesses
  • Installing/Integrating equipment using approved drawings, manufacturing aides / tooling, and technical manuals
  • Performing system testing using documented Acceptance Test Procedures (ATPs)
  • Documenting work order progress per/within Solumina / SAP
  • Documenting maintenance actions using approved government and LM procedures and paper forms
  • Enforce security procedures for working in a classified area at all times
  • Compliance with all Safety and FOD elimination policies


Physical Demands:

  • The position requires long periods of stand, walk, climb or balance, stoop, kneel, crouch or crawl, and detect gasses or fuel leaks
  • Basic Computer Skills Required. (Outlook, Word, Excel)
  • Position requires ability to lift 40lbs

 
Job Number: 2110128758
Job Location: Owego, NY
Duration: 7 months
Input Date: 08/02/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PfBqQAK&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Engineer

Description:
Unique Skills:
Avionics and/or Electrical system development and integration experience is required.
Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
Understanding of DO-160, DO-178 and DO-254 processes is preferred.
System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
ARP-4754A experience including requirements development, validation and verification is preferred.
Experience with IBM DOORS or other requirements management database is preferred
Bachelor's Degree in Engineering Required.
10+ years of Avionics and/or Electrical Systems Engineering experience.
 
Job Number: 374793
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/11/2021
Last Updated: 10/26/2021
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Avionics Engineer

Description:
The Avionics Engineer reports to the Manager, Avionics Engineering and is responsible for the engineering data,
instructions, documents, and technical support that economically ensures the safety, airworthiness, and reliability of aircraft within the following ATA chapter subjects: 22, 23, 24, 26, 28, 31, 33, 34, 45, 46, 77.

Responsibilities:
1. Issue instructions (EO’s) and documents to economically support operations and return aircraft to service in a
safe, airworthy, and timely manner.
2. Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for
repairs, alterations, and modifications.
3. Report on the status of projects and issues as directed.
4. Update technical source documents as applicable to insure accuracy.
5. Support integration of new and previously operated aircraft.
6. Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside
engineering departments; regulatory personnel; and other outside agencies.
7. Participate in industry working groups, industry steering committees, industry meetings, and conferences.
8. Review work of consultant, contract, and MRO Systems Engineers.

Key Objectives (Metrics):
1. Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness
Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
2. Develop product improvement modifications as directed by Reliability Indicators.
 
Job Number: 87451200
Job Location: KY
Rate: Direct Salary
Duration: Perm work
Input Date: 07/13/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer (16 needed)

Description:
Unique Skills:
• Avionics and/or Electrical system development and integration experience is required.
• Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
• Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
• Understanding of DO-160, DO-178 and DO-254 processes is preferred.
• System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
• ARP-4754A experience including requirements development, validation and verification is preferred.
• Experience with IBM DOORS or other requirements management database is preferred.
 
Job Number: 24-536
Job Location: Savannah, GA
Rate: $68-75/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics Installer I

Description:
PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 

 

Education and Experience Requirements: 



  • High School diploma/GED.
  • General knowledge of applicable regulatory requirements and customer specifications.
  • Must know how to use a multimeter.
  • Entry level position.
  • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.


Unique Skills:



  • Must be able to use Avionics/Electrical hand tools.



Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.


 
Job Number: 2110139135
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/06/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j5wIQAQ&URLSource=cjhunter

Avionics Installer Sr.

Description:
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions: 1. Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. 2. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 3. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways 4. Assists Engineering in resolving problems and makes repairs per engineering direction. 5. Maintains required logs and records. 6. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 7. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 8. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Coordinate shift changes in team leaders absence. 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 4. Assists and fills in for team coordinator as required. 5. Performs other duties as assigned. 

 

Education and Experience Requirements:
High School diploma/GED.
Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field.
Ability to read and interpret blueprints and schematic diagrams.

 

Unique Skills:



Understanding of aircraft wiring drawings



Other Requirements:
1. Possess a working knowledge of the Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications.
2. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule.
3. Strong written and verbal skills required.
4. Computer keyboard skills necessary.

 


 
Job Number: 2110136065
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/20/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Q0TxQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer

Description:
• Help with the numerous software development tasks. Support Jenkins pipeline development, avionics backlog work, continued DAS cleanup work, silicon bird development, etc.

Qualifications:
• 5+ years industry experience, ideally in aerospace or automotive software development
• Exposure to a wide variety of aircraft software development standards
• Significant experience in C++
• Experience with real time operating systems and process scheduling
• Experience interfacing with I/O hardware including analog, discrete, and serial data
• Experience with socket programming and network communication including an understanding of the physical, data, network, and transport layers
• Experience developing automated test suites
• Excellent communication skills — able to partner internally and research and interact with potential suppliers

Ideal Qualifications:
• Experience as the responsible engineer for critical components of an aircraft avionics suite
• Experience with continuous integration tools
• Experience with Python, shell scripting
• Experience developing and refining system level requirements from formal and informal sources
 
Job Number: 45-010
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 07/26/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics Systems Engineers with DOORS, V&V, DO-160

Description:
Contract-Avionics/Power Engineer-REQ#167670 in Savannah, GA
Skills:
Avionics and/or Electrical system development and integration experience is required.
Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
Understanding of DO-160, DO-178 and DO-254 processes is preferred.
System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
ARP-4754A experience including requirements development, validation and verification is preferred.
Experience with IBM DOORS or other requirements management database is preferred.
====================
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: Savannah, GA
Rate: $65-75/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 05/11/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician IV

Description:
An Avionics Technician IV job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. You'll be responsible for moderately complex installation, testing, troubleshooting, and repairing our aircraft avionics and electrical system components and keeping our aircraft in airworthy condition. To be considered for this role, you will have a High School Diploma or GED and typically 10 or more years of relevant experience.

Avionics Technician IV Job duties:

* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair,
wiring installation, soldering' and crimping techniques

Qualifications:

* High school diploma or GED equivalent and typically 10 or more years of relevant
experience; A higher-level degree may substitute for experience; Related experience may be
considered in lieu of required education
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US
Military

Pay Range: Up to $39/hr DOE

If you are interested in this Avionics Technician IV position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314642
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314638
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314641
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Avionics Technicians (A&P or FCC License) - 1st shift

Description:
PDS Tech is seeking Experienced Avionics Technicians with their A&P or FCC License for open positions in Coatesville PA

The ideal candidate will:

  • Correctly manufacture, route, install, and repair electrical wiring to Engineering Drawings and Standards.
  • Read and interpret wiring diagrams and relevant Maintenance Manuals to install and test avionics and Helicopter Systems equipment as assigned
  • Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
  • Properly build and accomplish final installs of complex wiring harnesses to Engineering Drawings and Standards.
  • Perform routine continuity and power checks to ensure harness integrity.
  • Troubleshoot electrical and avionics system on board aircraft and make necessary adjustments or repairs as assigned.
  • Route and clamp multiple wiring harnesses through airframe structure to both picture and Standards.
  • Ensure strict compliance with the Tool Control Program.
  • Comply with and participate in the FOD Program

Required Skills
  • Ability to Read and interpret schematic, technical drawings, and wiring diagrams.
  • Proficient in the use of avionics tools to include insertion/removal tools correct crimpers.  Must be able to select proper pins, crimp tools, removal and insertion tools for proper terminations of wiring connectors.
  • Strong Communication skills; written and verbal
  • Must be Detail Oriented and able to Multi-Task
  • Strong problem solving and evaluation skills


Education & Experience

  • High School Diploma or equivalent (required)
  • Technical School Certification or equivalent (required)
  • Valid A&P and/or FCC license (preferred)
  • 3 – 5 years recent experience minimum


Requirements

  • This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
  • Must be a US citizen or Permanent Resident Alien
  • Must have the ability to speak, read, and write English language
  • Be capable of working overtime and any assigned shift.
  • Be capable of lifting a minimum of 25 lbs.


 
 
Job Number: 2110129988
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 04/27/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PicYQAS&URLSource=cjhunter

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Avionics/Electrical Engineer (Contract)

Description:

PDS is looking for an Avionics Electrical Engineer in Wichita, KS:



In your role, you will:
• Review certification plans
• Write development and certification test procedures (Test Definition Sheets)
• Plot and analyze ground and flight test data
• Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
• Assist technicians in troubleshooting aircraft avionics system problems
• Create development engineering documentation for design changes, in a flight test environment
• Provide system performance analysis to ensure proper operation as per the design specification

 

Qualifications
As our ideal candidate,
• You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design, testing and/or certification OR a minimum of 12 years’ experience if no degree.
• You must have previous experience of supporting aircraft ground, flight, and functional testing
• You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems (preferred)
• You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
• You must have working knowledge of RTCA documents DO-178 and DO-160.
• You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
• You must have experience with utilizing ARINC data to isolate faults related to system controls software.
• You will demonstrate good teamwork and English communication skills, both oral and written, and be PC literate.
• You will demonstrate interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and suppliers.
• You must be self-motivated, able to coordinate multiple activities and manage time effectively.

 

 
Job Number: 2110130725
Job Location: Wichita, KS
Duration: 12 months
Input Date: 05/07/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pkr4QAC&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Unique Skills:



  • Experience with aircraft troubleshooting 

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110136339
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/03/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iwPjQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110138055
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/30/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j1mKQAQ&URLSource=cjhunter

Avionics/Structural Aircraft Mechanic (Interim Secret or Secret)

Description:
PDS Tech is seeking an Avionics/Structural Aircraft Mechanic for an open position in Patuxent River MD.  An Interim Secret or high security clearance is required

The ideal candidate will perform maintenance of flight test instrumentation for flight test programs.  They must be able to read and understand technical drawings, basic electronic wiring practices, basic electronic systems operations, and mechanical assembly of electronic components.



The candidate must be able to execute electrical (AVIONICS) / structural (MECHANIC) modifications with minimal supervision on multiple VH-92A aircraft.


The candidate may be required to maintain, troubleshoot, repair and service aircraft and engine systems, and perform other ad-hoc maintenance.

The candidate will be required to work alongside SAC Quality Leads to review/accept work and make appropriate aircraft log entries.

The candidate must be able to:
  • Follow and work to aircraft schematics, prints, and/or other approved technical publications. 
  • Have a comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation or manufacturers' manuals.  


Support may include:

  • Disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective parts on or off aircraft.
  • Adjusting, repairing, or replacing structures/ systems and aircraft components, systems, or accessories.
  • Perform other duties as requested to support overall contract effort or customer Aviation maintenance support.


Shift coverage will vary based on business requirements
Required Skills:
  • Minimum of 5+ combined years of rotary maintenance experience on the S-92 or other client product variants
  • Interim Secret or high-security clearance required.
  • Shift coverage will vary based on business requirements

 
Job Number: 2110137715
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 08/25/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j0qLQAQ&URLSource=cjhunter

Avionics/Power Engineer

Description:
Inconen is looking for an Avionics/Power Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with IBM DOORS or other requirements management database is preferred.

Education:
-Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Other Requirements
-Advanced degree in engineering related field preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 15265
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/11/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

CREO Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 10/01/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Cabinetmaker Sr

Description:

PDS is seeking a Cabinetmaker Sr for an open position in Savannah, GA.

Under general supervision, fabricates the most complex cabinets and other wood-surfaced subassemblies for installation in aircraft. Assists lead by overseeing projects and providing guidance, assistance and training to co-workers. 

Essential Functions:

  1. Fabricates complex high quality furniture and other wood-surfaced subassemblies using stationary and hand held-tools.
  2. Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
  3. Utilizes a variety of woodworking tools and techniques.
  4. Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
  5. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
  6. Utilizes the material tracking system to create parts demand, track squawks and to sign-off work. 


Additional Functions:

  • Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians.
  • Oversees projects and coordinates with Lead to delegate tasks to assigned technicians.
  • Conducts safety audits and assists team members in doing safety audits.
  • Assists in maintaining shop equipment and associated JSAs.
  • Coordinates with other backshops when necessary.
  • Adapts to sudden schedule changes.
  • Performs other duties as required.


For Additional Information on this Opening Please Contact Tyler Reynolds:
Direct Number: 912-257-4939
Email Your Updated Resume to Treynolds@pdstech.com


 



Education and Experience Requirements:



  • Must be able to work any shift and work overtime as needed.
  • High school diploma/GED.
  • Advanced knowledge of cabinetmaking processes and products.
  • Four (4) years of experience in cabinetmaking.
  • Experience in aerospace industry preferred.
  • Possess a working knowledge of inspection and process specifications preferred.


Unique Skills:



Aircraft/Marine cabinetmaking a plus



Other Requirements:

  • Demonstrates excellent communication skills, both verbal and written.
  • The ability to read, write, speak, and understand the English language.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate..


For Additional Information on this Opening Please Contact Tyler Reynolds:
Direct Number: 912-257-4939
Email Your Updated Resume to Treynolds@pdstech.com


 



 

 
Job Number: 2110136062
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/20/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Q0TiQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - Aircraft Interiors

Description:
Certification Engineer with a minimum 10 years STC experience on large commercial jet interiors. Ability to write test plans and coordinate all administrative duties related to FAA certification of interior systems, structures and payloads in general.
 
Job Number: CEAI-001
Job Location: Everett, WA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: October
Input Date: 09/09/2021
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer III - Structures / Stress

Description:
CERTIFICATION ENGINEER III - STRUCTURES / STRESS
MUST BE US Citizens

Job Description:
• Generate stress and fatigue analysis on composite and metal aircraft structures using classical hand analysis and Finite Element Modeling
• Conduct static and dynamic certification tests
• Manage ground, bench, and flight test data acquisition, data reduction and analysis
• Complete FAA and foreign certification activities
• Author test proposals, test results, analysis reports, and certification reports
• Review and approve technical drawings to ensure compliance with engineering specifications and regulations

Qualifications:
• 10+ years’ applied aerospace industry experience required.
• Must have experience with FAA or EASA Part 23 and Part 25 certification.
• Applicant must be highly motivated, willing to work in fast paced environment, and have interest in aviation industry.
• Technical report writing skills to prepare test plans, test results, structural analysis substantiations, and regulatory compliance reports.
• Applicant must show general knowledge of aerospace design.
• Experience using SOLIDWORKS, FEMAP, NASTRAN, MS Excel, and MS Word.

Education:
Bachelor’s Degree or Master’s Degree in Mechanical or Aerospace Engineering.

The Structures Company LLC is an AA/EOE
 
Job Location: Sandpoint, ID
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 08/02/2021
Last Updated: 09/23/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer III - Structures/Stress

Description:
CERTIFICATION ENGINEER III - STRUCTURES

US CITIZENSHIP IS REQUIRED

Job Description:
• Generate stress and fatigue analysis on composite and metal aircraft structures using classical hand analysis and Finite Element Modeling
• Conduct static and dynamic certification tests
• Manage ground, bench, and flight test data acquisition, data reduction and analysis
• Complete FAA and foreign certification activities
• Author test proposals, test results, analysis reports, and certification reports
• Review and approve technical drawings to ensure compliance with engineering specifications and regulations
• Experience with aircraft certification projects is required. Winglet/wing experience and Part 23/25 are preferred, but not required.
• Travel will be required


Qualifications:
• 10+ years’ applied aerospace industry experience required.
• Must have experience with FAA or EASA Part 23 and Part 25 certification.
• Applicant must be highly motivated, willing to work in fast paced environment, and have interest in aviation industry.
• Technical report writing skills to prepare test plans, test results, structural analysis substantiations, and regulatory compliance reports.
• Applicant must show general knowledge of aerospace design.
• Experience using SOLIDWORKS, FEMAP, NASTRAN, MS Excel, and MS Word.
• The ability to communicate clearly and effectively within a multi-disciplinary team structure utilizing good written and spoken English communication skills is required.

Education:
Bachelor’s Degree or Master’s Degree in Mechanical or Aerospace Engineering.

The Structures Company LLC is an AA/EOE
 
Job Number: 506
Job Location: Sandpoint, ID
Rate: $80-$85/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 09/23/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Claims Administrator

Description:
PDS Tech is hiring a Claims Administrator for Greensboro, NC!

You will be in frequent contact with domestic and international customers, dealers and service centers to review and adjudicate customer claims, ensure timely resolution of issues, and administer monthly invoicing for aftermarket programs. You will work closely with other teams within Honda Customer Service to ensure customer satisfaction and support company objectives.

  • Review and adjudicate customer warranty and program claims in accordance with contract coverage and policies.
  • Make authorized financial decisions and credit assessments in accordance with company policies.
  • Collect, document, and evaluate claim data to build and update the labor catalog.
  • Support internal teams by building requested reports using claim and aircraft utilization data.
  • Assist customers in accessing the web portal to file claims, report aircraft and engine usage, and navigate maintenance manuals.
  • Assist customers with understanding warranty and aftermarket program coverage.
  • Facilitate program invoicing and work closely with Finance.
  • Provide feedback and ideas for system improvements; assist with testing of system updates and new features.


 
  • You have 3+ years of experience in Customer Service and an Associate’s degree or a minimum of 5+ years related experience.
  • Multilingual skills, parts catalog/blueprint review experience, SAP experience, and knowledge of the aviation industry and aircraft parts terminology are strongly preferred but not required.
  • You have a background in preparing, analyzing, and administering contracts.
  • You enjoy working in a team environment with taking ownership of specific tasks in support of company goals and success.


 

 
Job Number: 2110129859
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 09/13/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PiKxQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Unique Skills:
• Capitol Harness &/or Mentor Graphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred.
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic.
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience.
• Electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
• Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-596
Job Location: Savannah, GA
Rate: $60-$65/Hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 08/25/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Interiors, Engineer 4

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Unique Skills:
• Capitol Harness &/or Mentor Graphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• Aircraft electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-506
Job Location: Savannah, GA
Rate: $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services. Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Unique Skills:
• Proficient in System level Wire Diagram/Schematic design for aircraft.
• Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
• Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
• Ability to complete system level ELA (Electrical Load Analysis).
• Ability to develop or decipher technical and test specifications.
• Knowledge of 14 CFR 25 Subpart H - EWIS based design.
• Knowledge of Catia V5.
• Part 25 Certification experience for cabin interiors preferred.
• Familiarity with aircraft STC procedures preferred.
• Makes technical decisions and provides recommendations demonstrating leadership authority.
• Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-559
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4

Description:
Inconen is looking for a Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Proficient in System level Wire Diagram/Schematic design for aircraft.
Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
Ability to complete system level ELA (Electrical Load Analysis).
Ability to develop or decipher technical and test specifications.
Knowledge of 14 CFR 25 Subpart H - EWIS based design.
Knowledge of Catia V5.
Part 25 Certification experience for cabin interiors preferred.
Familiarity with aircraft STC procedures preferred.
Makes technical decisions and provides recommendations demonstrating leadership authority.
Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15573
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Engineer – Mechanical Liaison

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.
• Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Aircraft products and services.
• Coordinates with responsible engineering groups for aircraft build and Project Engineering focal points.
• Support of drawing/model build lists and how they apply to each aircraft in flow.
• Supporting multiple aircraft per year.
• Understanding of drawings and model architecture so any changes as required can be entered into a database system so design engineering and program can address as required.
• Have a clear understanding of the items submitted for correction and process of getting them back to support operations.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field.
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule.
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative.
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Actively works to improve daily processes and ensures all work meets customer requirements
• Ability to effectively work with and support a multi-disciplined team of engineers, mechanics, technicians, managers, customers etc.
• Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.

Unique skills required:
• Fundamental understanding of aircraft structures engineering principles and experience developing and applying minor and major repairs to aircraft structure.
• The ability to use computer aided design tools such as Smart Team, CATIA V4 & V5, AutoCAD, or similar in the design and repair of aircraft structures.
• Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers.
• CHS/EWIS experience is a plus.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-600
Job Location: Dallas, TX
Rate: $63-$68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Completions Mechanical Design Engineer, Completions - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
Proficient in Catia V5
Proficient in Smarteam
Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
Experience of routing plumbing on various monuments
Electrical Harness Installation (EHI) experience also a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15574
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical/EHI Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Primary responsibilities involve engineering designs of new and derivative versions of electrical systems, components, wire harnesses and wire installations relative to interior furnishings and amenities as part of outfitting new aircraft. Examples include but not limited to: system & harness development for custom cabinetry (such as galleys, lavatories, closets, & storage compartments), interior peripheries, water/waste systems integration, oxygen systems integration, overall electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

UNIQUE SKILLS:
AutoCad, Capitol Harness &/or Mentorgraphics required
Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
Experience with power distribution, lighting, switching, wire sizing and routing.
Experience with systems development, layout, logic and wiring diagram creation.
Familiarity in mechanical system design.
Analyze Electrical designs in 3D models
Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
Preferred candidate will have:
Catia V5 basic navigation experience.
Electrical system design experience.
14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
EWIS Certification familiarity & experience preferred.
Familiarity with aircraft STC procedures preferred.
Experience with electrical systems test plans and reports

EDUCATION AND EXPERIENCE REQUIREMENTS:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

ESSENTIAL FUNCTIONS:
Contributes to planning, developing and coordinating of important engineering projects
Provides specialized technical assistance to team members
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
Determines and develops own approach to solutions within schedule and cost objectives
Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-591
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Contract Administration Spec 1

Description:
ur team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official 'The Company' representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).
 
Job Number: JPC-1359
Job Location: Hazelwood, Mo
Rate: 35HR
Per Diem: YES
Overtime: NO
Duration: 9 MONTHS
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: diego.villegas@thestructurescompany.com
Website: www.thestructurescompany.com

Contract Administration Specialist 1

Description:
Job Description:

Our team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position to support. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official company representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE:

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).

The individual selected for this position will be working on a project where they will contract for military spare parts and repairs, working alongside a team of 35 individuals. The ideal candidate will have a strong understanding of finance acumen, possess strong communication skills and have the ability to work both independently and collaboratively. This candidate must be adaptable to change and value diversity within the workplace. Certifications are not a requirement for this role.

Additional Info:
This position will start off as a virtual position. A hybrid schedule of both on-side and virtual will be required once restrictions are lifted. For this reason, the manager would prefer local candidates only.

Manager is wanting to scheduling interviews as soon as possible. This will be a 2 round interview, with the first round being over the phone and the second being in-person. The interview will include both experience and behavioral based questions.
 
Job Number: 46676-1
Job Location: Hazelwood, MO
Rate: $35.00
Per Diem: Split
Overtime: Possible
Duration: 9 Months
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: jorge.garcia@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Management Specialist

Description:
General Summary:
This function interfaces with IS to accurately understand the meaning of data available in company systems, the most efficient way to collect it in a regular basis and, when metrics are mature, implement their automation.
• Use data analytics to assess current state, perform sensitivity analysis of future scenarios and make recommendations to management.
• Also works with Engineering and IS to implement new functionalities in company systems as well as with enterprise company data located in SAP, Kronos, Teamcenter, CATIA, sharepoint, MS Project Server and intranet to support the development of business needs, create new functions and dashboards.

Duties and Responsibilities:
• Interact with different parts of the organization to improve data accuracy and consistency.
• Create application programs and / or macros to automate processes and reports.
• Analysis of data existing in several different company systems to produce meaningful management information.
• Analysis of the quality of the data used for metrics and be part of the team that will implement corrections.
• Provide recommendations using data analytics
• Participate in process improvement initiatives
• Team up with Engineering teams and IS to implement new PLM functions and support the automation design creation.

Education, Work Experience, Certification and/or Licensure:
• Business BA, Production/Industrial Engineer BS or Operational Research BS.
• 0-3 years working with business analytics is preferred.

Knowledge, Skills and Abilities:
• Skilled in numerical analysis and use of data for simulations.
• Proficient user of Microsoft Office applications, especially Excel and Project
• Skilled in programming languages like Python, VBA, Java, etc
• Excellent critical thinking.
• Good communication skills.
• Understanding and working experience with databases. Working knowledge of Oracle database is preferred.
• Work well in teams, be detail oriented, ability to understand big picture, be proactive, persistent and flexible.
• Great desire to learn and develop the understanding of how CAD / PLM and ERP Systems are used to manage and use design data and Industrial Organizations.
• Ability to create meaningful and easy to understand interfaces for data creation / utilization.

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-028
Job Location: Greensboro, NC
Rate: $30-$50/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 09/09/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Tucson, AZ is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for developing engineering designs of components, assemblies, subassemblies, and subsystems. To be considered for this role, you will have a B.S. Degree in Engineering along with 2 - 5 years with system and/or hardware design and analysis experience.

Design Engineer Job Responsibilities:
* Independently develop engineering designs of components, assemblies, subassemblies, and subsystems
* Independently generate production drawings of components, assemblies, subassemblies, and subsystems
* Interface with internal customers (Design Leads, IPT Leads and Project Managers) to present technical results and/or convey challenges that must be overcome

Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 2 - 5 years with system and/or hardware design and analysis experience
* Experience in one or more of the following discipline areas: Life Support System Design, Crew Systems Design, Crew Cabin Design, Mechanical Design, or Thermal Control System Design
* Knowledge of, and skills in, SOLIDWORKS CAD software to generate CAD models and production drawings per company drawing standards
* Proficiency in the understanding and use of GD&T per ASME Y14.5
* Knowledge of, and skills in, Product Data Management tools (SOLIDWORKS PDM preferred)
* Ability to conceptualize design solutions and generate CAD renderings given a limited set of requirements
* Skills in Microsoft Office applications (Excel, Word, Outlook, PowerPoint)
* Knowledge and experience with design and development of spacecraft, spacesuits, aircraft, military, or other relevant vehicles, systems, subsystems, assemblies, and/or components
* Ideally, but not required, knowledge and experience in at least one of the following discipline areas: Environmental Control and Life support Systems, Thermal Control Systems, Crew Systems, Cabin Design, Mechanical Design, Mechanical Analysis, or Thermal Analysis
* Knowledge and experience on the engineering product lifecycle, ranging from requirements development through design, manufacture, test, and operations

If you are interested in this Design Engineer job in Tucson, AZ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314854
Job Location: Tucson, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/05/2021
Last Updated: 09/30/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Doors & Mechanisms / Crew & Equipment

Description:
Inconen is looking for a Design Engineer - Doors & Mechanisms / Crew & Equipment for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Combined Engineering team responsible for Doors & Mechanisms and Crew & Equipment across all company programs including New Product Development, the current Large Cabin fleet, and Special Missions.
-This position is targeted at New Product Development.
-An Engineer on this team will be responsible for a variety of tasks developing and certifying designs within these disciplines.
-Design experience at an aircraft OEM is required.
-Catia V5 experience is required.

Preference given to candidates with experience in these areas:
Doors & Mechanisms:
• Main entry, emergency exit, landing gear, service, and access doors
• Drive mechanisms, metallic and composite structure, seals
• Ingress / egress, placarding
• Hydraulic actuators and dampers
• Kinematics

Crew & Equipment:
• Electrical equipment installations
• Flight deck layout & equipment
• Cabin insulation
• Flammability
• Component qualification
• Closeout panels and composites
• Electrical bonding
• Secondary structure including racks, trays, shelves, and bracketry

Additional experience preferred:
• Supplier design and qualification
• Gulfstream processes and procedures
• New aircraft program certification
• Real world (hands on) aircraft familiarity
• Catia V5 with Smarteam
• RTCA DO-160
• ARP4754A

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16886
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/13/2021
Last Updated: 10/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer – Doors & Mechanisms

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Design experience at an aircraft OEM is required.
• Catia V5 experience is required.
• Preference given to candidates with experience in these areas:
o Doors & Mechanisms:
 Main entry, emergency exit, landing gear, service, and access doors
 Drive mechanisms, metallic and composite structure, seals
 Ingress / egress, placarding
 Hydraulic actuators and dampers
 Kinematics
o Crew & Equipment:
 Electrical equipment installations
 Flight deck layout & equipment
 Cabin insulation
 Flammability
 Component qualification
 Closeout panels and composites
 Electrical bonding
 Secondary structure including racks, trays, shelves, and bracketry
o Additional experience preferred:
 Supplier design and qualification
 Gulfstream processes and procedures
 New aircraft program certification
 Real world (hands on) aircraft familiarity
 Catia V5 with Smarteam
 RTCA DO-160
 ARP4754A

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-605
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 09/13/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking 4 Design and Analysis Engineer 5's for an opportunity in St. Charles, MO.

RESPONSIBILITIES:
Leads development, integration and test of weapons system avionics such as mission computers, tail actuation systems and carriage electronic systems.

Leads work with customers to develop and document complex electronic and electrical system requirements in accordance with customer needs and contract requirements.

Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs, interface specifications and technical performance specifications.

Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.

Manages performance of critical suppliers to ensure system integration and compliance with requirements.

Resolves product integration issues and production anomalies.

Supports fielded hardware and software over the entire product lifecycle.

Perform integration of weapons products onto aircraft platforms.

Oversee lab, ground, and flight test activities, and work resolution of testing anomalies.

Provide support to production.

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

ADDITIONAL INFORMATION:
Role is on-site. Must be local or willing to relocate at own expense.
 
Job Number: 194013
Job Location: St. Charles, MO
Rate: $DOE
Duration: 9 Months
Input Date: 08/27/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Material Compliance Engineer

Description:
Scope of Work:

Responsible for completing full material disclosures for purposes of reporting hazardous chemical content to relevant global environmental regulations and customers as necessary
Refer to the material specification, bill of material and engineering drawings to capture the relevant information (materials, Chemical finish, organic finish, finishing processes etc) to the reporting template (excel/ customer proprietary tool).
Responsible for aiding in any specific requests from customers for environmental reports or substance declarations as necessary.
Calculate volume and density of individual parts and assemblies in Catia.
Create 3d models and assemblies in Catia as required.
Update process documents as required in word/ customer proprietary tool.
Skills Required:
Read and interpret aircraft engineering drawings.
Knowledge of product finish process, manufacturing processes.
Familiarity with REACH regulations and SVHC compliance is a plus.
Working Knowledge in Catia V4/V5 /V6
Good interpersonal and communication skills.
PC proficiency in MSWord, Excel, PowerPoint, and Outlook is required.
Education:

Associate Degree in a Technical field preferred or some advanced training in lieu of degree with experience
Years of Experience: 3+ years in engineering Industry. Experience in Aerospace will be a plus.

Citizenship: US Person
 
Job Number: JR-024852
Job Location: Fort Worth, TX
Duration: Permanent Full-Time
Input Date: 09/08/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

ECS Manager

Description:
General Summary:

The ECS Manager manages the technical, cost and schedule and personnel aspects of the Environmental Control Systems (Pneumatic System, Pressurization System, Air Conditioning, Cabin Pressure Control System, Leak Detection System, Oxygen System, and Waste System) through all phases of design, development, certification, production, and product support. Ensures all aspects of design are compliant with the system requirements document.



Duties and Responsibilities:

Oversees and coordinates the ECS project activities through all phases of design, development, certification, production, and production support.
Maintains and presents to senior management the integrated project schedule and status for the Environmental Control Systems.
Tracks and reports status of action items related to design, development, certification, and flight test related for the ECS.
Prepares and maintains functional test procedures to test the ECS sub-systems as installed on the aircraft.
Prepares and maintains functional interface control document(s) that identify the integration requirements between the ECS sub-systems and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics/electrical power system integration of the ECS sub-systems.
Conducts regression tests to ensure that the ECS sub-systems are integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the ECS sub-systems to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the ECS.
Prepares/reviews qualification test procedures and qualification test reports associated with the ECS.
Establishes qualification test schedules with the supplier of the ECS components and coordinates Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables between the supplier, HAC and the DERs.
May serve as the DER for the applicable delegations.
Supports the creation of the certification plan for the ECS.
Manages personnel by assigning and monitoring tasks so that they are done on time and are complete and accurate.
Conducts performance evaluations for personnel and creates, implements and monitors personnel development plans.












Education, Work Experience, Certification and/or Licensure:

Bachelors degree in Engineering or related field required.
8 years of leadership experience in one or more of the Environment Control Systems including: design; development: aircraft integration, and certification.


Knowledge, Skills and Abilities:

Experience in managing personnel.
Strong organizational skills.
Excellent oral and written communication skills.
Strong presentational skills.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong working knowledge of DO-160, DO-178B and DO-254 processes are required,
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Strong working knowledge of FAA processes and procedures related to qualification testing.
Strong working knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.

The Structures Company LLC is an AA/EOE.
 
Job Number: 500
Job Location: Greensboro, NC
Rate: $150K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-6 Weeks
Input Date: 09/07/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Aircraft Interiors Engineer with Mentorgraphics

Description:
===========================================
Engineer Contractor 3 - Electrical Interiors in Savannah, GA
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: PL Elec Interiors
Job Location: Savannah, GA
Rate: $60-65/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/23/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Electrical Applications Engineer

Description:
Inconen is looking for an Electrical Applications Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Skills:
-Candidate must have in-depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
-In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
-Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
-Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15311
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Inconen is looking for an Electrical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience with Capital Logic required.
-Experience with Smarteam preferred.
-Experience with Instrumentation electrical design a plus.
-Experience with Aircraft electrical wiring diagrams a plus.
-Analog electrical design experience a plus.

Education and Experience Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15447
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Eng/Secondary Structure (4 needed)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Unique Skills:
• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical workbench is necessary
• Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects .
• Provides specialized technical assistance to team members.
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
• Determines and develops own approach to solutions within schedule and cost objectives .
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
• Acts as liaison with representatives outside of the assigned group/area .

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements .
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
• Perform other duties as assigned.
 
Job Number: 24-523
Job Location: Savannah, GA
Rate: $66-70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 09/22/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Harness Installation Engineer/Secondary Structures

Description:
Inconen is looking for a Electrical Harness Installation Engineer/Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

Unique skills:
1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
5. Aerospace Experience is required
6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
8. Knowledge of Catia V5 Electrical workbench is necessary
9. Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15220
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/03/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Liaison Engineer

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Aircraft products and services.  Coordinates with responsible engineering groups for aircraft build and Project Engineering focal points.  Support of drawing/model build lists and how they apply to each aircraft in flow.  Supporting multiple aircraft per year.  Understanding of drawings and model architecture so any changes as required can be entered into a database system so design engineering and program can address as required. Have a clear understanding of the items submitted for correction and process of getting them back to support operations.

Unique Skills:
Fundamental understanding of aircraft avionics systems engineering principles and experience developing and applying minor and major modifications and installations to aircraft systems.
The ability to use computer aided design tools such as Smart Team, CATIA V4 & V5, AutoCAD, or similar in the design and modification of aircraft systems.
Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers.
CHS/EWIS experience is a plus

Duties and Responsibilities include:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Ability to effectively work with and support a multi-disciplined team of engineers, mechanics, technicians, managers, customers etc. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
Is consulted extensively by associates and others as a recognized authority within the field.
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
Approach to problem solving balances technical product, cost and schedule.
Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-599
Job Location: Dallas, TX
Rate: $63-$68.25/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Systems Design Engineer 4

Description:
**Must be able to obtain a Secret Clearance**

Oklahoma City AMM Avionics and Flight Deck Integration is seeking experienced Avionics/Flight Deck and Electrical Design & Integration engineers. The candidate will provide engineering integration and support technical design decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, B-1B, B-2, B-52 and others) and diverse projects including development of aircraft design and verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within BDS Oklahoma City Program Portfolios.

Other job responsibilities may include
· Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for aircrafts.
· Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
· Analyzes results and performs design reviews
· Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
· Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
· Analyzes functional and physical input to assure development of complete integrated design
· Monitors supplier performance to ensure system integration and compliance with requirements.
· Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
· Participates in technical review of supplier capabilities to facilitate source selection

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Graphics, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired. Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle. Experience on aircraft or avionics development program(s) and in engineering labs is a plus.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 375156
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/26/2021
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes -
Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders.
Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.
 
Job Number: CJH -A- 6259
Job Location: Langley AFB, VA
Rate: $32.64
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders. Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.

Low observables experience
Current/active clearance
Training certification, experience maybe required to be shown (ex: A&P, military records, etc)

Skill Sets Needed below
Electronics - 6+ years
FAA A&P (Airframe & Powerplant) License - 2 to 4 years
Military Training Records -2 to 4 years
 
Job Number: CJH-6259
Job Location: Langley AFB, VA
Rate: 32.64
Per Diem: Yes
Overtime: Possible
Start Date: Asap
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

Electrical/Avionics Engineer - Contract

Description:

PDS is looking for an Electrical/Avionics Engineer in Wichita, KS:



In your role, you will:

  • Create system schematics, requirements documents, system descriptions, interface documents, wiring diagrams, certification plans, issue papers, functional test requirements, test plans, test reports, and design compliance reports for new and/or upgraded aircraft systems.
  • Review installation drawings, qualification test data and reports.
  • Champion and/or support change management through research, concepts, design reviews, trade studies, impact analysis, and implementation.
  • Find/Show compliance to 14CFR Part 25, Transport Canada, and EASA aircraft requirements.
  • Research specifications for components selections.   Work with suppliers and internal customers to assist with production and/or flight test personnel, investigating, troubleshooting, and resolution of build and test issues.
  • Extensive coordination with suppliers and internal support groups
  • Work in a team environment


Qualifications
As our ideal candidate,
  • You hold a Bachelor of Science, Electrical Engineering or equivalent.
  • You have a minimum of 5 years’ experience in electrical/avionics system design or related field.
  • You have a working knowledge of applicable regulatory certification rules (FAA, EASA, TCCA).
  • You have a working knowledge of Cybersecurity and System Safety aspects of certification
  • You are proficient with MS Office (MS Word, Excel, Power Point, Access)
  • Engineering Design for Six Sigma or Six Sigma Process training is a plus.
  • You have a working knowledge of electrical, avionics, and wire harness design guidelines for CFR Part 25 aircraft is preferred.
  • You must be a self-starter, able to decompose moderately complex projects into individual tasks and processes. 
  • You must exhibit excellent written and interpersonal communication skills.
  • You should be an organized individual, able to work effectively with a variety of cross-functional individuals, departments and organizations with a general good attitude and disposition.


 
Job Number: 2110137285
Job Location: Wichita, KS
Duration: 12 months
Input Date: 08/18/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003izQqQAI&URLSource=cjhunter

Electronic Systems Design & Analysis Engineer 5

Description:
**Requires the ability to obtain Secret Clearance. US Citizenship required.**

The team is seeking individuals to fill a variety of positions including RF/Microwave design, electronics package, avionics integration, and aircraft integration, just to name a few.

Position responsibilities include:

· Leads development, integration and test of weapons system avionics such as mission computers, tail actuation systems and carriage electronic systems.

· Leads work with customers to develop and document complex electronic and electrical system requirements in accordance with customer needs and contract requirements.

· Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs, interface specifications and technical performance specifications.

· Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.

· Manages performance of critical suppliers to ensure system integration and compliance with requirements.

· Resolves product integration issues and production anomalies.

· Supports fielded hardware and software over the entire product lifecycle.

· Perform integration of weapons products onto aircraft platforms.

· Oversee lab, ground, and flight test activities, and work resolution of testing anomalies.

· Provide support to production.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 375091
Job Location: St. Charles, MO
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 08/27/2021
Last Updated: 10/26/2021
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 3: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15036
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 10/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Conformity Mgt Planning, Lead (Engineer)

Description:
• Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection
• Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successfully plan conformity planning.
• Provide accurate and concise reports that reflect current status and trends.
• Recommend actions to correct possible deviations and / or concerning trends
• Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.

Duties and Responsibilities:
Coordinate the work and support the team that will:
• Reconcile what is planned to be conformed to data in company system
• Entry of “Required Conformity” in Company electronic form
• Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
• Support the creation of RFCs in Teamcenter
• Reconcile / ensure existence of QRs for released drawings requiring conformity
• Create and keep updated a “database” to hold or connect the following information
• Enter SCM information in the RFC
• Track the completion of RFC in Teamcenter
• Enter RFC information in NACIP
• Reconcile RFC needs with what SAP QNs that track it have
• Create associated reports
• Communicate status to management and other departments
• Follow up on DERs answers to Discrepancies

Education, Work Experience, Certification and/or Licensure:
• BS in Data Management / Business Administration / Engineering
• Mininum of 5 years working with FAA related processes of conformity inspection
• Excellent data analysis and communication skills
• Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
• Proficient user of Microsoft Office tools, especially Excel

Knowledge, Skills, and Abilities:
• Ability to adapt to and work effectively within a dynamic environment
• Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations;
• Ability to present effectively to diverse and demanding audiences.

Personality requirements:
• Persistent
• Excellent negotiation skills
• Reliable
• Self motivated
• Pro-active
• Focused
• Works well in teams and minimum supervision
• Flexible
• Goal and detail oriented

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: $40-$65.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 09/10/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 3

Description:
An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

Engineering Technician 3 duties:

* Support engineering activities such as, test, check-out, modification, fabrication and assembly of
prototype electro mechanical systems, experimental design circuitry, or specialized test
equipment.
* Assemble, test, and debug test fixtures and informal test procedures.
* Perform calibration checks on electronic instruments; troubleshoot an electronics system to
determine cause and remedy for malfunctioning.
* Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
perform testing, checkout and trouble-shooting functions with minimum supervision.
* Perform compliance testing to industry and customer-defined requirements on new and legacy
electromechanical devices.
* Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
test programs, oscilloscopes, signal generators and specialized test apparatus.
* Provide work leadership to lower level technicians.
* Perform other duties as assigned.

EDUCATION AND EXPERIENCE REQUIRED

* Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
schooling and experience required.
* Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
testing.
* Aptitude and experience in board level testing and component level troubleshooting, repair, and
rework.
* Experience in using computer based tools and procedures to perform, document, and track
testing.
* Must have experience with power supplies and logic systems.
* Excellent test and troubleshooting skills and independent judgment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313811
Job Location: Kirkland, wa
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/30/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Entry Level Aircraft Maintenance Technician

Description:
PDS Tech is seeking an Entry Level Aircraft Maintenance Technician for an open position in Louisville KY

The ideal candidate will perform various overhaul, rework, repair and associated operations on aircraft equipment and components in both standard and non-standard environments to maintain the flow of work.

The candidate will conduct:
  • Manual handling of aircraft wheels (rolling)
  • Dismounting of wheel halves (removal from tire)
  • Disassembly of wheel half piece parts
  • Washing wheel halves and piece parts (prep for inspection)
  • Paint removal – plastic media blast cabinet

     

The will also:

  • Conduct receiving inspection of in-coming assemblies/components in accordance with established procedures and technical data.
  • Be responsible for performing complete operation checkout, modification, disassembly, repair, reassembly, test calibration, diagnosis, and correction of problems.
  • Follow repair and return processes to ensure high quality and short cycle time of repair and return.
  • Set up necessary repair and test facilities.


On the job training will be provided. 
Small hand tool experience or previous mechanical experience a plus
 
Education:
  • High Diploma
  • US Citizens Only

 
Job Number: 2110128137
Job Location: Louisville, KY
Duration: 12 months
Input Date: 07/22/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PdawQAC&URLSource=cjhunter

Entry Level Aircraft Maintenance and Repair Technician

Description:
PDS Tech is seeking an Entry Level Aircraft Maintenance and Repair Technician for an open position in Trumbull CT. 

The ideal candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties

  • Work independently with limited supervision.
  • Use precision measuring instruments and gauges such as feeler gauges, dial indicators, micrometers, calipers.
  • Perform repair of detail components by filing, stoning, lapping and polishing.
  • Using power and hand tools for drilling, sanding and riveting.
  • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
  • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
  • Follow procedures found in component maintenance manuals, service bulletins, ORI’s,
    OREI’s, drawings, check sheets, etc.
  • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
  • Chemically treat repaired surfaces in accordance with approved data.
  • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
  • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
  • Use hydraulic test equipment.


 
Experience Required
  • High School Diploma or Equivalent required
     

Experience Preferred

  • Aerospace Powerplant and/or Airframe license preferred.
  • Min. 2 yrs. experience in Aerospace Maintenance preferred.


 
 
Job Number: 2110133412
Job Location: Trumbull, CT
Duration: 12 months
Input Date: 07/21/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PsQHQA0&URLSource=cjhunter