Job Search Results

171 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 09:02AM Pacific Time by ContractJobHunter. )

Listings 1 - 171

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
2. Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments.
4. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including work with Class III and Class IV lasers.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Education/Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
3. Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
4. Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
5. Experience in plasma modeling and simulation.
6. Experience with thermal and structural analysis from first principles.
7. Experience with solid state physics.
8. Coursework in plasma chemistry/non-equilibrium effects.
9. Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
10. Proficient with CAD software such as CATIA V5.
 
Job Number: 11709
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166556
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2224-1
Max Pay Rate: $83.00/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
-- Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
-- Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
-- Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
-- Experience in plasma modeling and simulation.
-- Experience with thermal and structural analysis from first principles.
-- Experience with solid state physics.
-- Coursework in plasma chemistry/non-equilibrium effects.
-- Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
-- Proficient with CAD software such as CATIA V5.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including work with Class IIIb and Class IV lasers.



Qty 1 position
 
Job Number: JE-2224-1S
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD - Engineer

Description:
Provide Engineering support for Core Stage 1/Stage 2 Creo and Creo Tools to include the following:
• Pro/Design Assembly, Detail, Cabling, Diagram & Manufacturing and surface modeling.
• Support in Windchill 9.0, Intralink, and PDM document management tools to meet stringent configuration management requirements per NASA and Aerospace standards.
• Support plans, schedules, conducts/coordinates detailed phases of the engineering or scientific work in a project, or perform work that involves conventional engineering or scientific practices. Typical work may include research, development, design, testing, logistics, analysis, production, maintenance, operation, planning, estimating, application, or standardization of engineering facilities, systems, structures, software applications, firmware, processes equipment, devices, or materials.
• Tools shall include Creo 4.0/5.0: machine, model design, Checker & updates with Top/Down large assembly experience, especially with simplified rep. family tables, skeleton/shrink wrap which allows for the efficient opening of large Creo models (with several thousand parts or more).
• Technical Check of design products

Candidate must be a U.S. Citizen.
This is a 2 month assignment with possible extensions
 
Job Number: 19-254
Job Location: Huntsville, AL
Rate: 62-92 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.



Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools



Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Must be able to meet US Defense requirements.

Esprit, Applicon, programming and Solid Edge CAD highly desirable, MasterCam, Language based or Graphics based CAM programming is helpful.
Programming 4 and 5 axis Mill/Turn equipment is a plus.
Renishaw probe software experience is a plus.
Macro-B programming is a plus.
Varied CNC operating experience desirable.
Must have worked in CNC programming demonstrating a high degree of proficiency
General math, geometry, and trigonometry experience required.
 
Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Must be able to meet US Defense requirements.

Esprit, Applicon, programming and Solid Edge CAD highly desirable, MasterCam, Language based or Graphics based CAM programming is helpful.
Programming 4 and 5 axis Mill/Turn equipment is a plus.
Renishaw probe software experience is a plus.
Macro-B programming is a plus.
Varied CNC operating experience desirable.
Must have worked in CNC programming demonstrating a high degree of proficiency
General math, geometry, and trigonometry experience required.
 
Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Data Management (CDM) Specialist- Job ID 39005

Description:
We have an Excellent Contract position for a Configuration Data Management Analyst to join a leading Company located in the Sterling Heights, MI surrounding area.
Job Responsibilities:
Perform configuration data management activities related to the design, development, and production of complex systems and equipment for the US government DoD customer.
Ensure application of organizational Configuration Management (CM) processes to program in accordance with CM plan.
Perform CM tasks that include the release of CAD models and drawings, and non-CAD product data into enterprise PDM.
Maintain drawings/part data and Bills of Materials in PDM.
Process drawing changes.
Maintain various CM logs, such as for drawing number assignments and Variance tracking.
Generate metrics from PDM.
Facilitate Configuration Control Boards (CCB) and maintain meeting records. Maintain the As Designed Bill of Materials (BOM).
Ensure the proper maintenance of Configuration Status Accounting (CSA) systems and prepare CSA reports.
Support the establishment and maintenance of the production baseline.
Support the delivery of the Technical Data Package (TDP) and maintenance of the TDP.
Support physical configuration audits (PCAs) and functional configuration audits (FCAs).
Support ISO, CMMI, Defense Contract Management Agency (DCMA), Quality and corporate audits.
Support CDRL deliveries.
Execute assigned CM tasks ensuring all program obligations and objectives are met in a timely manner.

Basic Hiring Criteria:
Experience in Engineering Release and Change Management and Bill of Materials management in a PDM environment, and handoffs to ERP systems.
Working knowledge of relevant design engineering standards, manufacturing, and supply chain processes. MS Office suite competency to prepare reports and documents.
Experience with PDM system.
Familiarity with CAD applications.
Experience with teleconferencing applications, and working in a distributed organization.

Skills Preferred:
Working knowledge of relevant design engineering standards, manufacturing processes, and configuration management, such as MIL-HDBK-61A, EIA-649B, MIL-STD-31000, Industry standards including ISO 10007, CMMI, drawing standards such as MIL-STD-100. Excellent computer skills with MS Office suite.
Experience with PTC Windchill PDM highly desirable.
Familiarity with CAD applications, preferably PTC Creo.

Experience Preferred:
4-8 years of broad Configuration Management experience in controlling technical drawings and CAD models in a DoD contractor environment highly desirable. or Data Management experience with Contract/Subcontract Data deliveries - CDRL and SDRLs)

Education Required:
Bachelor’s degree preferably in a technical discipline with a minimum of 2 years of relevant experience; or an Associate’s degree with 4 years of relevant experience.
 
Job Number: 39005
Job Location: Sterling Heights, MI
Rate: $41.46
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Data Management (CDM) Specialist- Job ID 39005

Description:
We have an Excellent Contract position for a Configuration Data Management Analyst to join a leading Company located in the Sterling Heights, MI surrounding area.
Job Responsibilities:
Perform configuration data management activities related to the design, development, and production of complex systems and equipment for the US government DoD customer.
Ensure application of organizational Configuration Management (CM) processes to program in accordance with CM plan.
Perform CM tasks that include the release of CAD models and drawings, and non-CAD product data into enterprise PDM.
Maintain drawings/part data and Bills of Materials in PDM.
Process drawing changes.
Maintain various CM logs, such as for drawing number assignments and Variance tracking.
Generate metrics from PDM.
Facilitate Configuration Control Boards (CCB) and maintain meeting records. Maintain the As Designed Bill of Materials (BOM).
Ensure the proper maintenance of Configuration Status Accounting (CSA) systems and prepare CSA reports.
Support the establishment and maintenance of the production baseline.
Support the delivery of the Technical Data Package (TDP) and maintenance of the TDP.
Support physical configuration audits (PCAs) and functional configuration audits (FCAs).
Support ISO, CMMI, Defense Contract Management Agency (DCMA), Quality and corporate audits.
Support CDRL deliveries.
Execute assigned CM tasks ensuring all program obligations and objectives are met in a timely manner.

Basic Hiring Criteria:
Experience in Engineering Release and Change Management and Bill of Materials management in a PDM environment, and handoffs to ERP systems.
Working knowledge of relevant design engineering standards, manufacturing, and supply chain processes. MS Office suite competency to prepare reports and documents.
Experience with PDM system.
Familiarity with CAD applications.
Experience with teleconferencing applications, and working in a distributed organization.

Skills Preferred:
Working knowledge of relevant design engineering standards, manufacturing processes, and configuration management, such as MIL-HDBK-61A, EIA-649B, MIL-STD-31000, Industry standards including ISO 10007, CMMI, drawing standards such as MIL-STD-100. Excellent computer skills with MS Office suite.
Experience with PTC Windchill PDM highly desirable.
Familiarity with CAD applications, preferably PTC Creo.

Experience Preferred:
4-8 years of broad Configuration Management experience in controlling technical drawings and CAD models in a DoD contractor environment highly desirable. or Data Management experience with Contract/Subcontract Data deliveries - CDRL and SDRLs)

Education Required:
Bachelor’s degree preferably in a technical discipline with a minimum of 2 years of relevant experience; or an Associate’s degree with 4 years of relevant experience.
 
Job Number: 39005
Job Location: Sterling Heights, MI
Rate: $41.46
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 3 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.

Education:
1. Associate's Degree
2. Applicants must have good CAD drawing and change order drafting skills.
3. Experience with Cadence/allegro 17.2 or higher is required for this job.
 
Job Number: 11188
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drive Systems Design Engineer

Description:
Drive Systems Design Engineer


Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration. This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements.


Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.
Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements:

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57715
Job Location: Fort Worth, TX
Rate: negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky phone
469-785-4744

Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer to provide direct support to Project Manager by interfacing with critical electronic component & subsystem suppliers. Manage engineering projects of moderate to large size and significant complexity, and of strategic importance.

Must have working knowledge of creating and integrating moderately complex electrical designs using CAD systems.
 
Job Number: 47407
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - SECRET CLEARANCE

Description:
Job Description:

• Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis and Device Implementation & Constraints, System Integration and Test.

• Design Low/Med/High Complexity Field Programmable Gate Array (FPGA) starting from System De-composition and completing through System Integration and Test



Qualifications:

• BSEE, Computer Engineering. or other related technical field of study.

• 9+ years of relevant FPGA design experience including:o Knowledge of High Complexity Digital Design Techniques and Devices.o Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Spectrum Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools



Preferred Additional Skills

• MSEE

• General: Microsoft Office, DOORs (Requirement Specification and Tractability), Revision Control (GIT, CVS, PTC Integrity, etc.)

• FPGA: Mentor Graphics HDL Designer, Mentor Graphics ModelSim/Questa, Synopsis Synplicity, Xilinx Client, Xilinx EDK XPS SDK, Xilinx Vivado, Altera Quartus, System Verilog, System C, UVM, OVM, VMM.

• Circuit Card: Cadence Allegro for Schematic Entry and to support PWB Layout/Route.

• Other: SoC FPGA bring-up

• U.S. granted government security clearance.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-43852
Job Location: Clifton, NJ
Rate: 95.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-10-27 00:00:00.0
Start Date: 2019-10-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Engineer II- Job ID 38856

Description:
We have an Excellent Contract position for a Facilities Engineer to join a leading Company located in York, PA. When applying, please enter the job ID.

Plans, designs and coordinates facility renovations, layouts, equipment updates, and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations. Develops implementation schedules for maintenance and/or subcontractor activities relating to facilities modernization, coordinating those activities to minimize production/operation delays or lost time and ensures compliance to schedules and project objectives. Investigates need for new facilities and equipment; participates in a make or buy decision. Develops specifications for foundations, structural, electrical, mechanical and necessary utilities that support facilities project implementation. Ensures technical outcomes are consistent with established engineering principles and practices and that customer and company technical, system, performance, and quality requirements are met.

Job Responsibilities:
Creates, plans and performs engineering design, development and/or analysis tasks of moderate complexity for a project or may lead these activities for a small project. Ensures tasks meet cost, quality, schedule and performance requirements.
Applies engineering design and/or analytical theory, principles, techniques, and practices to a portion of a technical project.
Manages assigned facility projects in the area of training, including meeting with customers to define project scope, determining conceptual design approach, developing and monitoring project budgets and schedules, handling communication during construction, monitoring construction quality, negotiating changes, creating a punch-list and certifying completion for final payment.
Applies knowledge of facility design to solve moderately complex and clearly defined engineering problems. Selects the best methods or processes from among several existing alternatives.
Develops and writes technical documentation, makes revisions to existing documentation and provides input to technical papers or presentations. May deliver technical presentations.
Performs technical analysis, testing, calculations and evaluation of results to solve moderately complex engineering problems using specialized equipment and/or by computer programs.
Provides input to project leaders for the development of project plans, schedules, and budgets.
Develops and maintains effective relationships with customers to solve technical problems of moderate complexity.
Analyzes and interprets design specifications, drawings, documentation, models and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
Analyzes and recommend methods for improving efficiency and reducing the environmental impact of plant operations.
Provides input on equipment reliability and robust design.
Maintains up-to-date knowledge of relevant engineering discipline(s), industry practices, trends, and applications.
May direct the work of less senior technical personnel.
Maintains a safe work environment and ensures compliance with safety policies and rules.
Shares responsibility for self-development with immediate supervisor.
Job Qualifications:
B.S. degree in a relevant technical discipline or an equivalent combination of education and experience, plus 2 years of relevant experience.
Working knowledge of fundamental concepts, practices, and procedures of a relevant technical field of specialization.
Familiarity with current computer applications including Word processing, spreadsheet, desktop publishing, and CAD/CAFM software including MS Office Suite (MS Project, PowerPoint, Excel & Visio).
High mental/visual application required to analyze facilities problems and recommend solutions.
Preferred education/experience:
Certain positions may require a specific technical degree or prefer an M.S. degree. Prefer engineering experience with relevant applications in an industrial environment.
 
Job Number: 38856
Job Location: York, PA
Rate: $30.00 to $37.69
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Design Engineer

Description:
Designing electrical wiring harnesses to include component selection for connectors, backshells, sleeving, braiding, sealants, boots, transitions, etc.

Work with CAD draftsman to route harnesses in 3D CAD tools (Pro-E and/or NX)

Designing in Mentor Capital software highly desired

Must be able to obtain a security clearance if necessary.
 
Job Number: 47566
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Prior demonstrated experience in landing gear design and one or more of the following technical areas:
1. CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
2. Experience in mechanism design
3. Experience with metallic and composite design
4. Experience with GD&T (Geometric Dimensioning and Tolerancing)
5. Experience with hand stress analysis
6. Degree in an Engineering Discipline

Education:
1. Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 11318
Job Location: Palmdale, CA
Rate: $105.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.

Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
* Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11793
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer- Solidworks

Description:
Job Responsibilities
•Reviews engineering designs to provide tooling, equipment, operation sequence, and other technical wherewithal to enable marine craft and land vehicles to be manufactured profitably.
•Seeks alternative manufacturing strategies to reduce production costs, increase output, or improve product quality.
•Analyzes engineering design to provide feedback to improve manufacturability of components and assemblies.
•Calculates labor hour and learning curve projections for new manufacturing programs.
•Oversees creation and maintenance of Manufacturing Bill of Material (MBOM) to break engineering product structure into logical manufacturing units and sequence to enable MRP order releasing, scheduling, and purchasing activities.
•Authors and maintains shop floor technical work instructions.
•Participates in Root Cause / Corrective Action (RCCA) activities to troubleshoot and prevent production defects.
•Ensures manufacturing processes and procedures comply with regulatory and contractual obligations.

Qualifications

Job Qualifications:
•Experience in shipbuilding, marine small craft, aluminum and steel welding, or construction of large fabricated assemblies is desired.
•Experience with Enterprise Resource Planning (ERP) / Material Requirements Planning (MRP) software and Solidworks or other 3D CAD programs is desired.
•Must be a U.S. citizen or Permanent Resident with the ability to obtain and maintain a security clearance.
•Must possess effective written and oral communication skills and the ability to work in a collaborative team environment.
•Applicants are expected to have the ability to apply logical or scientific thinking to a wide range of intellectual and practical problems.

Education Requirements: •Bachelor’s degree required. Preferred degrees are Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Naval Architecture, or Marine Engineering.
•Preferred years of experience per level: ◦Manufacturing Engineer: 2-6 years
◦Sr Manufacturing Engineer: 6-10 years.
◦Note: Level will be determined based on relevant experience, scope of role, reporting structure and management’s discretion
 
Job Location: New Orleans, LA
Rate: 45-48/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (PTC CREO Parametric)

Description:
The candidate will:
• Review and understand product specifications, design requirements, and scopes of work.
• Collaborate with Systems Engineering, New Product Introduction, and Operational Support Engineering on design requirements.
• Perform effort/duration estimates for tasks required to satisfy requirements.
• Generate design concepts and detailed design in conformance with requirements and ensure adequate trade studies and designed experiments are conducted to arrive at optimum design configurations.
• Perform tolerance analyses on components and assemblies to ensure proper fit/function.
• Provide basic stress analysis and free body diagrams of conceptual designs for initial sizing of parts.
• Proficient in CAD solid modeling techniques to prepare component and assembly models.
• Specify Geometric Dimensioning & Tolerance (GD&T) requirements.
• Preparation of drawings and perform initial engineering drawing check for approval prior to release.
• Provide engineering support during new hardware fabrication.
• Interface with all other functional groups and departments as required in the development of the product design.
• Mentor lower level engineers and/or off-site (LCC) engineers.
• Use department computer technology in an independent and productive manner.
• Experience with materials properties/selection and with manufacturing processes.
• Adhere to all Environmental, Health & Safety (EH&S) as well as International Trade Compliance (ITC) regulation and policy.

Required
• 6 years’ experience with detailed design using PTC CREO Parametric 2.0 or higher.
• Work experience in all aspects of mechanical/mechanism design.
• Knowledge of manufacturing methods, processes, and techniques.
• Bachelors degree

Preferred:
• Previous work experience with interpreting ASME Y14.100, ASME Y14.500 o FAA/EASA certification/regulation experience
 
Job Number: 1910107490
Job Location: Phoenix, AZ
Per Diem: Split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Process Systems)

Description:
Key Duties:

  • Develop concepts for new piping systems and provide flow, flexibility, thermal, structural, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Serve as the design point of contact or lead designer on larger, more complex projects.

  • Work with the project managers and project engineers to ensure that design input into cost, schedule, and other project-level decisions is accurate and complete.

  • Provide guidance to and check the work of less experienced engineers.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Provide engineering guidance to support the procurement of pumps, valves, heat exchangers, pressure vessels, or other hardware necessary for the fabrication and installation of the proposed design.

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 5 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Chemical or Mechanical Engineering.


 

Desired Skills, Experience, and Education:



  • Experience with interactions with fabrication and machine shops.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Familiarity with Caesar II software package.

  • Familiarity with Applied Flow Technology (AFT) Arrow, Fathom and Impulse software packages.

  • Familiarity with Autodesk Inventor and AutoCAD software packages.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46114
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Mechanical Designer

Phoenix, AZ
$39/hr
23 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO RELOCATION COMPENSATION**

Description:
o Review and understand product specifications, design requirements, and scope of work.
o Collaborate with Systems Engineering, New Product Introduction, and Operational Support Engineering on design requirements.
o Perform effort/duration estimates for tasks required to satisfy requirements.
o Generate design concepts and detailed design in conformance with requirements and ensure adequate trade studies and designed experiments are conducted to arrive at optimum design configurations.
o Perform tolerance analyses on components and assemblies to ensure proper fit/function.
o Provide basic stress analysis and free body diagrams of conceptual designs for initial sizing of parts.
o Proficient in CAD solid modeling techniques to prepare component and assembly models.
o Specify Geometric Dimensioning & Tolerance requirements.
o Preparation of drawings and perform initial engineering drawing check for approval prior to release.
o Provide engineering support during new hardware fabrication.
o Interface with all other functional groups and departments as required in the development of the product design.
o Mentor lower level engineers and/or off-site (LCC) engineers.
o Use department computer technology in an independent and productive manner.
o Experience with materials properties/selection and with manufacturing processes.
o Adhere to all Environmental, Health & Safety (EH&S) as well as International Trade Compliance (ITC) regulation and policy.

Requirements:
o 6 year's experience with detailed design using PTC CREO Parametric 2.0 or higher.
o Previous work experience with interpreting ASME Y14.100, ASME Y14.500
o FAA/EASA certification/regulation experience preferred.
o Work experience in all aspects of mechanical/mechanism design.
o Knowledge of manufacturing methods, processes, and techniques.
 
Job Number: 11669
Job Location: Phoenix, AZ
Rate: 39.00
Per Diem: No
Overtime: Possible
Duration: 23 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer Skills and Qualifications:

Requirements Analysis, Design Skills, CAD, Presenting Technical Information, Equipment Maintenance, Conceptual Skills, Project Management

Mechanical Engineer Job Duties:

  • Evaluates mechanical and electromechanical systems and products by conducting research and applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials in the design or selection.

  • Confirms system and product capabilities by designing feasibility and testing methods

  • Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components.

  • Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes.

  • Maintains product and company reputation by complying with government regulations.

  • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services.

  • Perform initial and ongoing design reviews

  • Deliver documentation offering a critical analysis and suggestions for correcting errors

  • Identify process deficiencies and develop solutions to improve those deficiencies

  • Submit a scope of work for each project that includes budgetary numbers and the goal of each project

  • Develop detailed CAD drawings and review drawings

  • Liaising with suppliers




Job Requirements:

Bachelor's Degree in Mechanical Engineering required

2 years project management experience

4 years engineering experience Strong knowledge of CAD/CAM software and drafting procedures

Excellent prioritization and project development skills

 






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-43181
Job Location: Phoenix, AZ
Rate: 34.62USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Machine Design)

Description:
Key Duties:

  • Develop concepts for new hardware and provide thermal, structural, flow, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Designing one-of-a-kind of mechanisms, wind tunnel models, and test fixtures including associated stress analysis.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 10 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic and feasible designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Mechanical Engineering.


 

Desired Skills and Experience:



  • 15 or more years of experience designing machines, mechanisms, stress analysis, etc.

  • Experience with interactions with fabrication and machine shops.

  • Working understanding of Geometric Dimensioning and Tolerance (GD&T).

  • Familiarity with wind tunnel model design and fabrication.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Experience with injection mechanisms.

  • Experience with positioning and control systems.

  • Experience with prototyping and checkouts.

  • Experience with ANSYS FEA software package.

  • Experience with AUTODESK INVENTOR CAD software.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46109
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-29 00:00:00.0
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / Landing gear design experience required / CATIA V5 or Solidworks or Pro Engineer or Creo or Unigraphics or NX / GD&T hand stress analysis / degree required - Clearance CA

Description:
165951 Mechanical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 9/3/2019
End Date: 9/4/2020

Job Description:
Prior demonstrated experience in landing gear design and one or more of the following technical areas:

- CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
- Experience in mechanism design
- Experience with metallic and composite design
- Experience with GD&T (Geometric Dimensioning and Tolerancing)
- Experience with hand stress analysis
- Degree in an Engineering Discipline


Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1900-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Analog Mixed Signal IC Designer

Description:
Bachelor's degree in a technical area with 5 years of experience in Analog/Mixed Signal Circuit design (3 years with technical MS or 0 years with a PhD)

Experience with some of the following: •IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;

Mixed-signal circuit design experience (Digital and Analog);

Physical verification utilizing Cadence Assura or Mentor Calibre.


This is not a layout engineer position. Candidate must have experience designing circuits starting with schematic entry and simulation.
 
Job Number: 1910107901
Job Location: Linthicum, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Systems / Mechanical Test Engineer - Clearance CA

Description:
Principal Systems/Mechanical Test Engineer (Job Number: 19024355)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Dec 1, 2019

Target End Date: Nov 27, 2020

Pay Rate: $51 - $54

Work schedule: 4/10

Duration of Assignment: up to 1 year

Selected candidates are expected to perform the following…
Test Engineer
• Author and publish Test Procedures.
• Plan and arrange the labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
• Maintain metrics on status of testing and constraints.
Designer/ Mechanical Engineer
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work under general direction with minimal to no oversight, work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree plus 5 yr. experience in test operations.
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1797S5
Job Location: Palmdale, CA
Rate: 54/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
We have a great opportunity for our client's Propulsion group!

Duration – 9-12 months
Exempt position (salary)
Pate Rate: Open

Experience:
Must have system level engineering experience on engine installations.
Turbo Prop install experience is preferable, but not mandatory.
Must have a BS degree (BSAE, BSME).
System testing required for PDR.
Experience with engine installation into aircraft for PDR.
Spec out system parts.
Coordinate/support manufacturing.
Select and manage suppliers.
Some experience with CAD software like Catia V5, UG NX, etc.
Experience doing thermal analysis of engine installations.
US Citizen or permanent resident.
 
Job Location: Manassas, VA
Rate: Open
Per Diem: Split
Duration: 12+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Designer

Description:
Experience with relevant applications in a defense environment.

Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors.
 
Job Number: 47522
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Analog Mixed Signal IC Designer

Description:
Bachelor's degree in a technical area with 9 years of experience in Analog/Mixed Signal Circuit design (7 years with technical MS or 4 years with a PhD)

Experience with some of the following: •IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;

Mixed-signal circuit design experience (Digital and Analog);

Physical verification utilizing Cadence Assura or Mentor Calibre.


This is not a layout engineer position. Candidate must have experience designing circuits starting with schematic entry and simulation.
 
Job Number: 1910107904
Job Location: Linthicum, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Manufacturing Engineer (Engines)

Description:
Job Description
Major purpose:
Major functions: IDENTIFY DETAILED DESCRIPTION OF WORK:
-Develop and document processes using equipment, tooling, and material handling (Internal and Purchased)
-Create and maintain the layout of the work area
-Work with cross functional team to ensure processes to meet Quality, Cost, and Delivery metrics
-Document processes based on supplied documentation using equipment, tooling, and material handling (Internal and purchased)
-Create and maintain the layout of the work area
-Evaluate work methods, prepare and / or modify documented work instructions
-Specify tools, gages, fixtures and any related support equipment for assigned areas of responsibility
-Interface with vendors on problem resolution, fixture design and build or rebuilding of tools and fixtures
-Train Team Leaders and UAW employees on proper execution of work instructions as needed
-Analyze new product quotes and provide cost estimates on tools, fixtures, machines, gages and recurring labor
-Support production by resolving process, producibility and quality problems using Lean Sigma techniques
-Write Scopes of Work (SOW), detailed presentations, and financial justification for the procurement of capital equipment
Technical/Functional skills:
Education/Experience/Licenses etc.: DESCRIBE ANY JOB REQUIREMENTS AND/OR BONAFIDE OCCUPATIONAL REQUIREMENTS:
QUALIFICATIONS:
REQUIRED
- Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology with a minimum of 5 years experience required or 21+ years of engine manufacturing experience
- Must have extensive hands on experience with machining equipment from 1950’s to current (Manual, CNC and Automation)
- Availability for occasional business travel
- Availability for casual overtime based on workload and/or urgency
- Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment
- Must be familiar with, and able to utilize all Microsoft Office Applications
- Good written and verbal communication skills required
- Must have experience in working in a manufaturing machining shop ,and experienced in the following:
- Set-up and operation of manual and CNC machining equipment
- Process Planning Software
- Bill of Material structures
- Assembly fixture concepts & Design
- How to work with suppliers in the design and fabrication of fixtures, tools, parts or machines
- How to work within a union environment
- Must be able to read machining and assembly prints and correlate them with the Bill of Material and associated processes
- Must understand metric measurements and tooling
- Previously held security clearance preferred. Ability to get security clearance required
- Must be able to move freely, with or without accommodation, throughout the manufacturing environment

PREFER
- Project Management experience, have used MS Project in the past and have developed Statement of Work, Work Breakdown Structure, and Schedules
- Understanding of Geometeric Dimensioning & Tolerancing techniques
- Working knowledge of using CAD models and programs in ProE and AutoCad
 
Job Location: Muskegon, MI
Rate: 50-55/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Systems/Mechanical Test Engineer 4 / NX10 GD&T - Clearance CA

Description:
Sr Principal Systems/Mechanical Test Engineer 4 (Job Number: 19023934)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Nov 1, 2019

Target End Date: Oct 30, 2020

Pay Rate: $62 - $65

Work schedule: 4/10

Duration of Assignment: Up to 1 year


Selected candidates are expected to perform the following:

Test Engineer
• Mentor and lead less experienced Engineers thru all phases of Static, Fatigue / Structural Test lifecycle.
• Author and publish Test Procedures.
• Plan and arrange labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Facilitate collaboration across disciplines during technical interchanges.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
Designer/ Mechanical Engineer
• Mentor and lead design Team, review designs for compliance, technically and requirements.
• Lead and provide mentorship to less experienced Engineers during CDR / PDR.
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong leadership, written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work with little to no direction and be capable and willing to lead and oversee the work of less experienced engineers. Must work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree with 9 yrs; 7 yrs. with Masters; 4 yrs. with PhD
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1796S5
Job Location: Palmdale, CA
Rate: 65/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. Also your last investigation needs to be within the last 5 years****

Job Descriptions:
1. This position is for an Airframe Dynamics Analysis.
2. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures.
3. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis.
4. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

Job Requirements:
1. Structural dynamics/vibro-acoustics analysis experience on air vehicles is required.
2. Structural analysis hand calculation methods
3. Excellent verbal and written communication skills
4. Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
5. Finite Element Analysis (FEA)
6. ADAMS modeling and simulation
7. MSC NASTRAN/PATRAN
8. Familiarity with CAD modeling

Education:
1. B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
 
Job Number: 11122
Job Location: Palmdale, CA
Rate: $90.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
165274/1675-1
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 3
Desired Start Date: 6/25/2019
End Date: 6/24/2020

Job Description:
This position is for an Airframe Dynamics Analysis Team with Lockheed Martin's Skunk Works® Advanced Development Programs. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

• Structural dynamics/vibro-acoustics analysis experience
• Structural analysis hand calculation methods
• Excellent verbal and written communication skills
• Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
• Finite Element Analysis (FEA)
• ADAMS modeling and simulation
• MSC NASTRAN/PATRAN
• Familiarity with CAD modeling

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $90.00 Hourly
Experience
Technical Skills Vehicle Dynamics Yes 1 6 + Years
Technical Skills Knowledge of Dynamics and Control Areas No 2
 
Job Number: JE-1675-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
• Must have experience with primary and secondary structural design.
• Must have experience with a CAD software (Catia, UG, etc.). SolidWorks is preferred.
• Experience with completions, or interiors is a plus
• Degree is not required, but preferred.


The Structures Company is an AA/EOE.
 
Job Number: 344
Job Location: IN
Rate: $50-$57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Experience with Special Missions Program data.
2. Configuration Management training or certification.
3. Excellent communication skills and extensive experience interacting with the customer.
4. Excellent Organizational skills including tracking of configuration status.
5. Ability to generate, disseminate, and execute light weight processes and procedures.
6. Experience with Product Lifecycle Management (PLM) Tools such as CAD Datanet, TeamCenter, or 3DS.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11790
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Configuration Management training or certification
2. Excellent communication skills and extensive experience interacting with the customer.
3. Experience with CAD DataNet Tool

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11788
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Location: Chula Vista, CA (91910)

12+ month contract


Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace preferred). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufacturing processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continuous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57941
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Chula Vista, CA
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

Additional:
BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace prefered). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufactuiring processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.
 
Job Number: 11596
Job Location: Chula Vista, CA
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Maker

Description:
Nesco Resource has a great opportunity for a Tool Maker to work at a premiere Manufacturer in the North Branford, CT Area. The ideal candidate will be a self starter with the ability to work well with others in a diverse environment.

 

Responsibilities: 

  • The main responsibilities of a Toolmaker are: making, repairing, and maintaining precision tools (such as jigs, molds and dies), which are then used in the manufacturing process to make products.

  • Proficiency in using the following type of equipment: CNC, milling machine, lathe, grinding wheel, etc.

  • The position interfaces with our design engineering in order to provide input as to the manufacturability of parts being designed.  

  • The candidate has to be able to work independently and be self-motivated.  Computer proficiency is required to be able to program the CNC machine and CAD software. 

  • A wide degree of creativity and latitude is expected.


 

Qualifications

Education:



This position requires a minimum of a High School Education, or GED.

Toolmaker Apprenticeship Program certified by the State of Connecticut preferred.

 

Skills & Abilities:

 

  • Ability to read and interpret internal and or customer requirements and be able to follow detailed instructions including drawings and blueprints.

  • Computer skills including CAD, MS Office and Outlook.

  • Ability to make independent decisions after review of internal and or customer requirements.

  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.  Basic understanding of geometry and trigonometry.

  • Ability to work well as part of a team.


Experience:

 

Must have the ability to setup and operate a milling machine, grinding wheel, CNC.

 

A minimum of three (3) years related experience working to very tight tolerances +/-.0001.



Hours: Monday - Friday 7:00 am- 3:30 pm



Pay Rate: $30.50.00/hr




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-44682
Job Location: North Branford, CT
Rate: 63440.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristen Boroski
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Windchill Administrator

Description:
Qualifications & Skills
• 2 - 5 years related on Windchill Administration
• Developing applications in JAVA a plus
• Experience in UNIX and Windows Operating Systems
• Experience with UNIX and Ant Scripting
• Experience with Engineering concepts and programs (Windchill PDMLink 10.0, CREO Parametric 2.0+) desirable
• Knowledge of SQL and XML
• Available to support off-shift system administration support
• Effective communication and problem-solving skills
• Ability to work effectively in a team environment, customer support environment and with all levels of the organization

• Installation of vendor applications (coordination will required IT resources)
• Build Deployment
o Support and perform code deployments and configuration changes at the system level, including code review and test coordination
o Includes application updates such as upgrades, patches, and new releases.
o Preparing build files for deployment
o Writing and building deployment scripts
o Setting up working directories
• System Maintenance
o Execute Daily/Weekly Maintenance Plan
o Perform Windchill Maintenance tasks (WinDU, WinRU, revaulting, etc.)
o Maintain vault space
o Clone/Rehosts
o CAD Workers Administration
o Log and temp file cleanup and rotation
o Remote File Server setup and maintenance
• Monitoring
o Review ServerManager, MethodServer and other logs for issues
o PTC System Monitor administration, monitoring and reporting
• Working Defects
o Develops test plans for new or modified programs
o Tests, debugs, implements, and documents fixes
o Performs issue resolution and root cause analysis
• Environment planning (monitor CPU, RAM, and disk space growth and plan for expansion or clean-up)
• Coordinate environment resources and schedules for development, test, certification and production activities
• Maintain system administration documentation
• This position includes on-call critical support as well as working with tier 1 and 2 analysts and application users to provide support.
 
Job Number: 5668
Job Location: Billerica, Mass
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4 (Electrical Design Engineer)

Description:
Wire Design & Install Engr 4

Location: Kennedy Space Center, FL
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Familiarity with wire harness design and electronic unit placement for aerospace applications a must. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General
Skill Code: 679-Electrical/Electronic Installation Design

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13478
Job Location: Kennedy Space Center, FL
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4-Florida

Description:
Wire Design & Install Engr 4

Location: Kennedy Space Center, FL
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Familiarity with wire harness design and electronic unit placement for aerospace applications a must. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General
 
Job Number: 19-13478
Job Location: Kennedy Space Center, FL
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 11/11/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

Back to Advanced Job Search