Job Search Results

375 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/23 Sunday 11:22PM Pacific Time by ContractJobHunter. )

Listings 1 - 375

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Must have a secret clearance

Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis. Knowledge of a wide range of electronics equipment and cooling methods. Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements. Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Coupled Flow Field and Thermal/ANSYS/BSME

FEMAP
 
Job Number: 40176
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/13/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Inwood, NY

Description:
STS AeroStaff Services now offers Chief Aviation Inspector jobs in Inwood, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes

Qualifications:

• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs.
• Must be able to read, write and understand the English language
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40727
Job Location: Inwood, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/28/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 3

Description:
Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 4x10

**MUST have an Active Secret Clearance or have had one within the last two (2) years**

Description
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skills:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.

Skill/Experience/Education
Mandatory:
- Five years or more of experience in Component Engineering.
- Must be proficient with computer tools such as MS Excel.
- Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
- Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
- Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
 
Job Number: 7694
Job Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 07/31/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Alabama, Tucson or Texas locations
FPGA and Digital design experience
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.



Required Skills:

• A minimum of 4 years’ experience in Digital Design

• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design

• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.

• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production

• A strong advocate for process improvement

• A self-motivated and effective communicator

• Experience in managing schedule and resources to meet assigned milestones

• Ability to obtain and retain security clearance

Desired Skills:

• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)

• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Six Sigma specialist

Required Education (including Major):

Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
 
Job Number: 38760
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Principal Engineer (EMI/ EMC Electromagnetic Interference) - Domestic and International Programs
This position is based with the IDS Electrical Design Directorate Seapower and Electronic Systems Department in Marlborough, MA. Our engineers develop state of the art technology in support of multiple programs, international and domestic, deployed throughout the globe.
We are looking for an experienced Engineer in the field of EMI/ EMC electromagnetic interference/ electromagnetic compatibility. The candidate should possess at least 10 years of experience in this field with 10 years of engineering experience and have experience with both military and commercial standards, including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15. A critical skill will be ability to perform analysis with respect to NSTISSAM TEMPEST/2-95 and experience with the Certified TEMPEST Technical Authority (CTTA) and NSA TAG certified TEMPEST Professional Level 1 or 2. Additional areas of expertise will include experience in the design and verification analysis of EMI/EMC, Electrostatic Discharge (ESD), Hazards of Electromagnetic Radiation to Personnel (HERP), and Hazards of Electromagnetic to Ordnance (HERO), Lightning, EMP and High Altitude EMP, Shielding effectiveness and ESD. Also desirable would be familiarity with TEMPEST filter designs and isolation techniques.
Additional skills required include a background in E3/ TEMPEST testing, including test plan development, test execution and report generation.
Required Skills:
•5+ years of experience in field of TEMPEST analysis including NSA TAG certification TEMPEST professional Level 1.
•10+ years of experience in the field of EMI/ EMC including Electrostatic Discharge, Hazards of Electromagnetic Radiation (RADHAZ) , Lightning, EMP and High Altitude EMP analysis and/ or test.
•Familiarity with both Military and commercial standards including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15.
•Familiarity with design simulation tools including AutoCAD, Mathcad, MatLab, FloEMC, XFDTD, EMPro, ANSYS and NEC4.
•Basic project planning and tracking experience
Desired Skills: •NSA TAG certification TEMPEST professional Level 2
•NARTE Engineering Electromagnetic Compatibility/Interference (EMC/EMI) Certification
•10+ years of EMC and design experience
•Background in E3 testing including test plan development, test execution and report generation Required Education (including Major):
•BS in Engineering, Science or Mathematics plus 10 years experience
•MS in Engineering, Science or Mathematics with 5 years experience
•PhD in Engineering, Science or Mathematics with 5 years experience
 
Job Number: 40004
Job Location: Marlborough, MA
Duration: C-P
Start Date: ASAP
Input Date: 12/05/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Security Clearance desirable but not required.

• Experience: 8+ years of domain experience
focused on the analysis and troubleshooting aspect and not someone who has only designed.

• Design, development, modification and analysis of various electronic systems.

• Troubleshoot and diagnose malfunctions in new/existing products or systems and makes modifications as needed.

• Compile and evaluate design and test data.

• Analyze, develops and recommends design approaches.

• Must be familiar with VHDL, Verilog, FPGAs, CPLDs, Schematic Capture/Simulation (preferably Mentor tools). 8-10 years Hardware design experience
 
Job Number: 40855
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer-Tucson, AZ - McKinney, TX - Huntsville, AL

Description:
Job Description:
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production
• A strong advocate for process improvement
• A self-motivated and effective communicator
• Experience in managing schedule and resources to meet assigned milestones
• Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist
Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements

**Must be able to obtain/maintain a Secret clearance - Can start without

Multiple locations-
Tucson, AZ - McKinney, TX - Huntsville, AL
 
Job Number: NH
Job Location: Hunstville, AL
Input Date: 12/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III

Orlando, FL
$53.00/Hr
1 Year Contract

MUST HAVE AN ACTIVE SECRET CLEARANCE

1st Shift


Description

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


Skill/Experience/Education

Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

Desired:

CREO,
 
Job Number: 7719
Job Location: Orlando, FL
Rate: 53.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 07/31/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000237QZAAY&URLSource=cjhunter

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 09/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
Major functions:

Technical/Functional skills:
Education/Experience/Licenses etc.: Required Competencies/Skills:
• Experience using C/C++ to develop embedded software
• Experience with Real-Time Operating Systems (FreeRTOS a plus)
• Excellent verbal and written communication skills
• Demonstrated ability to work as part of a team
• 6+ years of experience
• Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

Preferred Competencies/Skills:
• Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
• Experience working with other programming languages such as C#, MATLAB, Python, etc.
• Experience in the Defense, Space, Aerospace, or similar industries
• Experience using Quartus and Altera/Client tools
• Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
• Experience with Linux and Windows Development Environments
• Basic knowledge of circuits, schematics, and hardware design
 
Job Number: 17-53009
Job Location: Mason, OH
Rate: 65.00 - 85.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aides (Internship) - Santa Barbara, CA

Description:
STS AeroStaff Services now offers Engineering Aide jobs in Santa Barbara, California. This is a part time internship for a CURRENT student whose GPA is at least 3.0 or higher.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Overview:

Seeking a talented engineering intern with electrical, electronic engineering, or integrated circuit design training or experience to help advance the state-of-the art in infrared and visible sensors.

Job Duties:

• The selected candidate will contribute as part of a design team creating advanced infrared cameras and imaging systems
• Technology areas of interest include integrated circuit CMOS design, software development and programming in C, C++, and MATLAB, systems engineering, electrical engineering, analog and digital circuit design, RF design, integrated circuit design, and/or infrared optics and radiometry

Qualifications:

• Must be a CURRENT student with a GPA of 3.0 or higher

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40745
Job Location: Santa Barbara, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
FPGA Design Engineer position is responsible for electronics & FPGA design and implementation in support of video & image processing.

- Implement video and image processing pipeline in FPGA fabric
- Review requirements; work on architecture and design details for FPGA & processor implementations
- Select existing IP blocks that can be used and write own IP blocks where needed
- Create correct design constraints to avoid timing issues for each block and for the complete design
- Implement different video and image processing algorithms on FPGA
- Develop test environments on FPGA and perform testing
- Develop firmware on real-time operating system (RTOS) and with Linux environment

- Experience with designing ARM processors and AXI bus with Zynq Ultrascale+ MPSoC or understanding of similar SoC FPGA architectures, including the PS-PL interfacing, either on bare-C or OS based designs
- Experience with industry-standard protocols, such as PCIe, USB, Ethernet, DDR, I2C, SPI, CAN, etc.
- Experience with generic video and camera interfaces such as LVDS, HDMI, Display Port, Camera Link, SDI, GigEVision, etc.
- Experience with Vivado and Xilinx SDK
- Experience writing RTOS and Linux device drivers for embedded vision systems
- Hands-on experience in digital system design using VHDL and Verilog and FPGA-based system bring-up and debugging
 
Job Number: 41206
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
File Clerks - Burlingame, CA

Description:
STS AeroStaff Services now offers File Clerk jobs in Burlingame, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The primary function of the File Clerk position is to file, make copies, send out out-going faxes, distribute in-coming faxes, distribute mail, and light data entry - overflow of general office/clerical.

Job Duties:

• Will be working on a project moving paper records to electronic storage

Qualifications:

• The ideal professional candidate should possess excellent communication skills, be personable, dedicated, conscientious, punctual, able to multi-task, be a team player, possess typing/computer skills
• The ideal candidate will be a self-starter, someone who will efficiently and reliably accomplish the job, with a good eye for detail and accuracy
• The attitude is as important as the skills
• Ideal candidate can look at the project and come up with the best way of accomplishing it, while maintaining confidentiality, reliability, and efficiency

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40734
Job Location: Burlingame, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Readiness Technician D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Flight Readiness Technician D
(U.S. Citizenship Required*)
Palmdale, CA
2017-5053

Join our team as an Aircraft Inspector – Mechanic, Electrical, Electronics, and Mechanic Flight – to perform operational check out of aircraft prior to and during preflight.

Responsibilities:
• Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
• Inspect explosive and armament installations. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
• Maintain aircraft historical records.
• Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system.
• Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
• Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures. Modify aircraft components or aircraft support equipment.
• Perform operational checkout, including diagnosing and correcting malfunctions, of hydraulic systems and mechanical systems.
• Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned.
• Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies.
• Splice, route, clamp, solder, and string tie wires or wire bundles.
• Repair, install and hook up bomb, missile and rocket racks and pylons.
• Perform composite repairs

Qualification:
• Required – Active Secret Clearance with the ability to obtain a Top Secret.
• Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
• Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
• Proficient using computer systems for office and shop applications.
• Knowledgeable about and able to work in FOD controlled environments.
• Knowledgeable and able to apply shop math.
• Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
• Able to complete and maintain all required training and certifications needed to do job efficiently.
• Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
• F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
• F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems
• Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required – specialized vocational training or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
 
Job Number: 2017-5053
Job Location: Palmdale, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 09/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Reliability Test Engineer

Description:
Do you want to help change the world? If so, read on…

We are currently seeking a Hardware Reliability Test Engineer who can really shine! This important role supports the test automation/hardware reliability verification effort and will contribute to the business goal of ensuring the most efficient, and reliable microinverter systems, by establishing the most effective test practices. What you can look forward to:

Automating data collection and analysis to achieve optimal results

Working with cross-functional teams to resolve issues in a timely manner

Applying reliability testing principles and practices towards completion of goals

Developing detailed understanding of product design and implementation

Applying product knowledge and reliability testing principles towards the development of test software for data collection and analysis in a very large reliability test environment

Performing unit test of own code, conduct code review and support existing test software

Facilitating the efficient collection of test data and report test outcomes by collecting, analyzing, interpreting, summarizing and displaying data

What you will need to do it well:

BS/MS in Electronic Engineering, Computer Science or equivalent

5+ years recent experience in a senior role in the area of product verification or manufacturing test development

Experience with Design of Experiments (DOE) and Reliability testing preferred. HALT/HASS, Relex or Reliasoft knowledge is a plus (+)

Experience with Python, C++/C# or other object-oriented programming language is required. Python is preferred. Test automation experience is a plus (+)

Some experience with power supplies, inverters or solar power is strongly desired

Background in Hardware Debugging and Hardware Quality Assurance Process

Extreme attention to detail

Good working knowledge of process improvement



Enea will not sponsor applicants for work visas for this position.
 
Job Number: WW102717ENP
Job Location: Santa Clara/Petaluma, CA
Per Diem: YES
Overtime: YES
Duration: 12 MONTHS
Start Date: Nov 15th
Input Date: 12/04/2017
Last Updated: 12/07/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Test Automation Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.

Do you want to help change the world? If so, read on…
We are currently seeking a Hardware Reliability Test and Automation Engineer who can really shine! This important role supports the test automation/hardware reliability verification effort and will contribute to the business goal of ensuring the most efficient, and reliable microinverter systems, by establishing the most effective test practices.

What you can look forward to:
Automating data collection and analysis to achieve optimal results
Working with cross functional teams to resolve issues in a timely manner
Applying reliability testing principles and practices towards completion of goals
Developing detailed understanding of product design and implementation
Applying product knowledge and reliability testing principles towards the development of test software for data collection and analysis in a very large reliability test environment
Performing unit test of own code, conduct code review and support existing test software
Facilitating the efficient collection of test data and report test outcomes by collecting, analyzing, interpreting, summarizing and displaying data
What you will need to do it well:
BS/MS in Electronic Engineering, Computer Science or equivalent
5+ years recent experience in a senior role in the area of product verification or manufacturing test development
Experience with Design of Experiments (DOE) and Reliability testing preferred. HALT/HASS, Relex or Reliasoft knowledge is a plus (+)
Experience with Python, C++/C# or other object-oriented programming language is required. Python is preferred. Test automation experience is a plus (+)
Some experience with power supplies, inverters or solar power is strongly desired
Background in Hardware Debugging and Hardware Quality Assurance Process
Extreme attention to detail
Good working knowledge of process improvement
 
Job Number: WW090717ENP
Job Location: Petaluma, CA
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 12/07/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laboratory Administrator

Description:
Laboratory Administrator
(Supporting the Mechanical Engineering Labs)

Location: Orlando, FL
Pay Rate: DOE ($17/hr - $23/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Job Description:
The position is for a laboratory administrator located within the Mechanical Engineering Labs in the Mechanical Engineering department.
The overall primary job responsibility is to work with labs and internal customers to ensure laboratory work requests are submitted properly, routed to the correct lab, and closed out and archived once the work is complete
A key job function will be to help and support the new electronic work request interface. This will require a working knowledge of Microsoft SharePoint design and administration, as well as Microsoft Access database management.
Additional job duties will include placing and tracking purchase requests, managing chemical inventories, and updating individual lab SharePoint websites.
This position is customer focused, highly visible, and will be essential in growing and modernizing lab operations. The position reports to the Test and Special Processes Lab Group Manager, under the ME Labs Senior Manager, operating as a key section of the Mechanical Engineering Directorate within Engineering and Technology.

Basic/Mandatory Qualifications:
• Excellent organizational and clerical skills.
• Familiarity with Microsoft SharePoint, SharePoint Designer, and InfoPath with the ability to become a SharePoint super user.
• Familiarity managing Microsoft Access databases with ability to learn more advanced functions.
• Capable of scheduling, de-conflicting, and coordinating multiple lab activities concurrently.
• Very proficient in computing within a Windows-based MS Office-suite centered environment for communication, scheduling, data processing, and basic data transfer.
• Demonstrated sound writing and verbal communication skills.
• Minimum of a AA degree
• Able to obtain a DoD Secret Clearance.

Desired Skills:
• Demonstrated experience creating, modifying, and managing Microsoft Access databases.
• Demonstrated experience creating, modifying, and managing Microsoft Share Point sites.
• BS degree
• Current DoD Secret clearance.
 
Job Number: 8141
Job Location: Orlando, FL
Rate: 17-23
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 01/03/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Manufacturing Planner 3-Electrical/Electronic
9 months
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.
 
Job Number: 17-27023
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 11/27/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4

Description:
Manufacturing Planner 4 - Electrical/Electronic
9 months

Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.
 
Job Number: 17-27024
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 11/27/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4 Electrical/Electronics

Description:
Seeking 5 Manufacturing Planners for openings in Everett, WA.

RESPONSIBILITIES:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

EDUCAITON:
Accredited AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

FULL TIME/
WORK HOURS:
 
Job Number: 166519
Job Location: Everett, WA
Rate: $49.35 - $54.80
Per Diem: Yes
Overtime: Yes
Duration: 9 mths
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Systems Engineer

Description:
- Develop vehicle power electrical and electronics specifications
- Design vehicle power electrical and electronic systems and components
- Design and analyze Electric Generators/Alternators and motors
- Design analog power circuits to include IGBTs, MOSFETs, etc.
- Experience with analog circuit design which focuses on electronic hardware for control and/or power conversion systems
- Experience with resolving circuit functional and performance issues with analysis (e.g., frequency analysis), simulation (e.g., PSpice, MatLab, etc.), and testing
- Experience with high voltage power electronics circuit board schematic capture and layout (using such tools as Mentor Graphics, ORCAD, etc.)
- Experience with electrical machine/power conversion control theory & implementation
 
Job Number: 41173
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician - Level 3

Description:
Production Test Technician – Level 3 (ACTIVE SECRET CLEARANCE REQUIRED)

Location: Manassas, VA
Pay Rate: $30/hr
Duration: 1 year contract
Schedule: 9/80, OT
**MUST be a U.S. CITIZEN – W2 POSITION**
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-MUST HAVE DEBUG and DIAGNOSTIC SKILL AND EXPERIENCE AND must be able to demonstrate/explain to the hiring manger details of experience.
-Two year technical degree in electronics or computer systems.
-Performs subassembly and unit test activities for ARCI submarine sonar system program.
-Test activities include the following:
-trouble shooting test failures and field return assets,
-performing factory acceptance tests with customer witness,
-completing test data sheets,
-compiling as built lists,
-generating reject notices for defective hardware,
-and documenting test software issues.
-Subassembly testing includes the following types of hardware:
-LINUX servers,
-VME based circuit cards, and
-CISCO switches.
-Knowledge of fiber optics, Windows and LINUX based operating systems is required.
-Knowledge of the following types of test equipment is required:
-function generator,
-oscilloscopes,
-multi-meters, and
-fiber optics meters.
-Applicant must have working knowledge of power circuitry.

Skill/Experience/Education(Mandatory):
-Two year technical degree in electronics or computer systems.
-MUST HAVE DEBUG and DIAGNOSTIC SKILL AND EXPERIENCE AND must be able to demonstrate/explain to the hiring manger details of experience.
- Knowledge of ARCI sonar system,
- Knowledge of fiber optics,
- Knowledge of Windows Operating Systems,
- Knowledge of LINUX Operating Systems,
-Microsoft Office Tools, Team oriented.
-Must be able to obtain a secret clearance.

Desired:
-Good written communication, Good verbal communication, Good problem solving
Information about the A-RCI program:
http://www.militaryaerospace.com/articles/2013/06/lockmart-arci-contract.html
 
Job Number: 7782
Job Location: Manassas, VA
Rate: 30
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/08/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer - Level 1

Description:
Location: Canoga Park, CA
Rate: $30.00 - $33.00/HR
Duration: 6 month contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates can be recent college graduates **

Job Description:
-Seeking a high-energy mechanical engineer to support our Component Product Engineering (CPE) Valve & Actuator technologies.
-This position provides technical support to project leadership for the development of in-house and supplier-based valve and actuator products.
-Valve products provide fluid control for cryogenic, gaseous, and storable propellants rocket engines and may include actuators and electronic controls.
-Position reports to Valve & Actuator CPE Director, and is assigned to Integrated Product Teams (IPTs).
-As an associate engineer, the CPE will learn technical details of valve designs, integration of components into rocket systems, traditional and additive manufacturing technologies, and test applications to provide support to IPT engineers for AR and supply-based design & development projects.

Responsibilities:
70% - Provide IPT support for valve design and development activities. This position works with senior engineers, valve design specialists, system engineers, subcontract managers, and quality engineers to develop requirements, specifications, statements of work, risk management plans, and manages the overall coordination of valve design and development. Coordinate communications between suppliers and lead engineers, valve design specialist, and functional generalist on technical issues, and manages supplier scope with the subcontract administrators. May have responsibility for managing the technical, schedule, and cost elements of valve component project tasks. Establishes criteria used in valve trade studies and make-buy decisions. Develops test plans and writes test reports, prepares presentations for internal and external customers.
20% - Provide communication of project status to the Engineering Director and IPT Leads. Project status includes overall project health, technical design and development results, risk management status, schedule and cost reporting. Supports the preparations of technical reports, presentations, and customer reviews.
10% – Supports in failure investigations and MRB actions, drawing on the technical expertise of specialists, as required. Coordinates the support of specialist and generalist to develop fault tree analysis and ensures execution, resolution, and close-out of all action plans.

Skills:
-Experience with MS Office suite tools, Matlab/Simulink, LabVIEW is a plus.

Education:
-Minimum Bachelor's Degree in Mechanical or Mechatronics Engineering is required; MS Degree is preferred.
-Related coursework in fluid mechanics, gas dynamics, and mechanical engineering design is desired.
 
Job Number: 8320
Job Location: Canoga Park, CA
Rate: $30.00 - $33.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/27/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager II - Linux, Embedded C/C++

Description:
The Project Manager II will lead a cross-functional team responsible for managing Engineering activities required to fulfill commitments for an airline customer program.

The role requires excellent communication skills, ability to see the “big picture”, and ability to direct efforts appropriately on prioritized tasks.

Responsibilities include the following:
• Participate in the development and analysis of customer requirements.
• Identify all customer deliverables which may include production items (mechanical, electronic and/or electro-mechanical assemblies), software, media, customer racks, documentation and systems.
• Identify internal deliverables which may include plans, schedules and other documents, prototypes, test equipment, software, test racks and more.
• Identify and secure resources required for all project tasks.
• Lead the team to establish a comprehensive, end-to-end project plan and schedule to which the team has “buy-in”.
• Maintain and manage to the project plan and schedule.
• Lead the team to coordinate design, development, documentation, integration, test and certification activities across functional groups to meet committed deliverables to customer schedule, cost and technical requirements.
• Coordinate the procurement and selection of parts, materials and components with suppliers.
• Manage third party development.
• Coordinate pre-production and design transfer to manufacturing.
• Coordinate initial customer deliveries.
• Apply standard techniques, procedures, processes and criteria to engineering assignments.
• Conduct well planned, effective meetings which drive actions.
• Continual process improvement.

Qualifications Required:
• B.S. degree or higher in Computer Science, Computer Engineering or a related field of study.
• Minimum 15 years of software and/or hardware engineering development experience (LINUX & EMBEDDED C / C++).
• At least 10 years of experience in project management of software, electronics, mechanics, and/or circuit design Must have excellent communication skills MS Office 2003 & MS Project.
 
Job Number: 361528
Job Location: Calabasas, CA
Rate: Open
Per Diem: None
Duration: Permanent
Input Date: 10/25/2017
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Analyst

Description:
Quality Control Analyst

Location: Bothell, WA
Duration: 6 months

Description:
- Performs analyses and tests of components/products from suppliers or internal manufacturing, to ensure quality standards and compliance to customer, internal and regulatory requirements.
Performs a variety of qualitative tests on samples, and aids in maintenance and certification of test instruments and apparatus to ensure compliance. Prepares and monitors quality statistics and reports.
Reviews production records for conformance to procedures. Conducts non-conformance tests of manufactured, packaged or tested product.

Responsibilities include but are not limited to:
- Inspecting components and assemblies
- Calibration activities
- Evaluate and disposition production nonconforming hardware and analyze defect data to identify systemic issues and trends
- Maintain electronic or mechanical equipment used to test products or process data.
- Gathers and manipulates common data, verifies adequacy and appropriateness;
- Inputs and organizes component specifications into hardware databases
- Develops charts, diagrams, and standard reports.
- Support, participate and execute continuous improvement activities

Mandatory:
- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 Years of experience.
- Work experience inspecting components and assemblies
- Work experience performing Calibration activities
- Demonstrated work experience with components and understanding of part specifications, drawings, blueprints
- Excellent communication skills
- Intermediate Level Use of MS Office (Word, Excel, PowerPoint)
- Good understanding of manufacturing and hardware engineering processes.

Desired:
AS9100 or ISO 9001 knowledge
Familiarity with hardware engineering requirements development and design, and system integration and test

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-19321
Job Location: Bothell,, WA
Input Date: 11/27/2017
Last Updated: 12/04/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sensor Integration Hardware Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Sensor Integration Hardware Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2017-5033
Responsibilities:
The Sensor Integration Hardware Engineer position is responsible for electronics design, implementation, test, and support of new sensor-based components & subsystems.
• Support concept to production H/W including requirements analysis, design, debug, test, and qualification
• Design, Develop, and Test Display Electronics, Components, and Subsystems
• Create detailed circuit board Specifications, ICD's, and test plans
• Support component selection, procurement, and oversight of prototype hardware build
• Create circuit board schematics, design circuit board assemblies, and create circuit board assembly layout
• Support concurrent engineering reviews and Trade Studies
• Develop Engineering Design Fixes, and Coordinate Solutions
• Perform technology research, feasibility assessments, and detailed hardware design requirements definition
• Develop concepts to support advanced technology initiatives, proposals, and demonstrators
• Lead engineering teams in development of software that is safety certifiable under MIL-STD-882E and/or ISO-26262

Qualifications:
• Familiarity with electrical hardware design and implementation in support of sensor integration
• Experience with real-time processing of sensor data
• Experience with Analog and Digital Circuit Design, including PCB design
• Experience with schematic entry and circuit board design tools (i.e. Mentor Graphics)
• Experience with Single Board Computers and Microcontrollers
• FPGA Design and Simulation, VHDL
• Experience with Analog and Digital Video Circuits
• Familiarity with Military Standards and Test Requirements
• Proficient in MIL-STD-882E and ISO-26262 and/or other safety-related specifications

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelors’ in Engineering, or specifically Electrical or Electronics Engineering, required with a minimum of 10 years applicable experience.
• Masters’ degree preferred; fewer years of experience will be required with an advanced degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5033/engrg-specialist-e%26c/job?mode=view
 
Job Number: 2017-5033
Job Location: Sterling Heights, MI
Duration: 12 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
160423
Requirement #AERO-REQ-0663
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 09/25/2017
End Date 06/25/2018
Number of Resources 1
Security Clearance Secret


Title: Software Engineer
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development. The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills. The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.
Skill/Experience/Education
Mandatory:

Development of Real-Time Operating Systems (RTOS) or usage of embedded real-time systems; Experience with C or C++; Experience with Guidance, Navigation, and Control (GNC) systems; Experience with IMU or GPS systems
Desired:

Demonstrated experience with the following: - Software AGILE process - Configuration management - Rhapsody - Developing code for Aerodynamic systems or small UAVs/UASs - Integrating hardware and software


Interview Required Yes
Min Pay Rate 75.00 USD
Shift 1st Shift
Max Bill Rate
OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0663
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 month contract
Input Date: 10/20/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
Requirement# AERO-REQ-0651
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80
Priority Medium
Needed Date 09/05/2017
End Date 03/02/2018
Number of Resources 1
Security Clearance Secret


Title: Software Engineer

Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test.Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills.The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Secret Clearance required
Experience programming in C/C++; Experience writing real-time embedded software; Experience with time and space partitioned operating systems, such as VxWorks 653 or Green Hills Integrity; Experience with ARM and/or PowerPC processors
Desired:

Experience with Mathwork’s Simulink Coder; Experience with Agile patterns and practices; Experience in all aspects of the software lifecycle: architecture, requirements, design, development, integration, testing, and flight test; Experience with MIL-STD 1553B and RS422/RS485 serial buses


Interview Required Yes

OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt


Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0651
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 3 months +
Input Date: 10/20/2017
Last Updated: 12/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer I – ability to obtain and hold a DoD secret security clearance TX AL AZ

Description:
Sr Electrical Engineer I – Clearance 7317193 - $75.00 HR

Senior Designer or Electrical Engineer with
understanding and wide application of technical theories, and concepts in digital design, with general
knowledge of other related disciplines. The Senior
Designer provides technical solutions to a wide range
of difficult problems. This position will function in a
multi-disciplined design team. The person will be the
Responsible Engineering Authority (REA) for
hardware design, fabrication, assembly, test, and
integration of a circuit card. Designs include
technology of processors, FPGAs, memory, and
industry interfaces, such as PCIe, Ethernet, I2C,
UART. Candidates can independently determine and
develop approach to solutions to contribute to the
completion of specific programs and projects.

Required Skills: U.S. Citizenship required • A minimum of 4 years’ experience in Digital Design • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement • A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Six Sigma specialist • Existing Secret security clearance Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements This position requires the ability to obtain and hold a DoD secret security clearance.
 
Job Number: MB-7317193
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: 75/hr max
Duration: 18 month contract
Input Date: 12/01/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain a Secret security Clearance AZ TX AL

Description:
Sr Electrical Engineer II – Clearance 7317190

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: open rate
Duration: 18 month contract
Input Date: 01/03/2018
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engineering or a similar technical discipline is a plus
Type of employment: Full time salaried position

Location: Chicago, IL
 
Job Number: 361925
Job Location: Chicago, IL
Rate: $125k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 01/19/2018
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Inspector SR

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Systems Integration Inspector SR
(U.S. Citizenship Required*)
Huntsville, AL
2017-5056

Responsibilities:
• Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment.
• Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications.
• Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks.
• Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections.
• Shift assigned will be based on bargaining unit agreements.

Qualification:
• Required – Active Secret Clearance
• Able to support long term travel to El Paso, TX: selected candidate will start and remain in Huntsville for 90 days then travel to El Paso, TX for 3-5 months.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High School Diploma or GED

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5056/systems-integration-inspector-sr/job?mode=view
 
Job Number: 2017-5056
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5056/systems-integration-inspector-sr/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Dallas, TX
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 14 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a DoD SECRET CLEARANCE**

Description
-Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE), establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion.
-Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills.

Skill/Experience/Education/MANDATORY:
-One of the following degrees: BSEE or BSEET or BSCE
-Agilent 3070 Series III Test Development experience: (4-5+ years' experience required)
-Boundary Scan programming: (4-5+ years' experience required)
-Fixture design: (4-5+ years' experience required)
-Microsoft Office applications: (1-3+ years' experience required)
-Strong writing and communication skills

Desired:
-Agilent device programming (Flash, EEPROM, CPLD): (1-3+ years' experience desired)
-JTAG Tech programming: (1-3+ years' experience desired)
-TestSight CAD translation: (1-3+ years' experience desired)
-CKT1175 programming: (1-3+ years' experience desired)
-Perl: (1-3+ years' experience desired)
 
Job Number: 8014
Job Location: Dallas, TX
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 10/20/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Operations Manager -Direct Hire-

Description:
Job Description:

Johnson Service Group is looking for a Test Operations Manager.


Essential Functions and Responsibilities:

-Manages the daily operations and assignments of the Test Development, Production sustaining Test Engineering and support teams.
-Collaborates with Customer Focused Teams (CFTs) and Production Operations to ensure daily committed objectives are realized.
Teams include; Functional Test Development, Functional Test-Sustaining, In-Circuit Test (HP3070) Development, ICT Sustaining, Flying Probe (Takaya 9411, SPEA 4060) Development, Sustaining engineering, functional and ICT debug technicians.
-Supports Sales with new prospect engagements to understand product testing requirements as technical resource.
-Creates product test development project plans and timelines.
-Supports all related activities including direct engagement with customers engineering staff and Corporate Global Engineering resources to ensure project objective are met.
-Engages with third party supporting resources and suppliers as necessary.
-Collaborates closely with staff on product test platform issues, trending product failures, etc. to define resolution, escalates as necessary.
-Makes recommendations for continuous improvement opportunities.
-Manages the Department’s equipment assets.
-Defines what equipment is or may be required to support current and future customer’s product testing requirements
-Creates equipment acquisition justifications and requests
-Collaborates with Quality Engineering for process improvement, supports internal and external corrective actions
-Supports and drives Department 5-S and other organizational opportunities.
-Provides daily statistics on work in process and resource planning in support of Production requirements.
-Follows all health and safety policies at all times
-Possesses excellent communication, listening and interpersonal skills with the ability to interact with multi-cultural backgrounds and build trusting relationships in order to gain support, achieve results within the organization.
-Possesses a high degree of integrity in the handling of confidential and sensitive information
-Must be motivated and self-directed, highly dependable with excellent multi-tasking and time management skills.
-Supportive of Lean, Six Sigma and related continuous improvement initiatives of critical operational metrics across key functions.
-Maintaining courteous, professional and effective working relationships with employees at all levels of the organization

Qualifications Required / Job Specifications:

-Technically qualified; 8+ years’ experience as Sr.Test Engineer, experienced in a functional test development role preferred.
-Experience with “Open Source” development; LinuxOS, python scripting, VB and other scripting languages
-Experienced with Labview/Teststand preferred
-Experience with strategizing product test interfaces (hardware design.
-Experience in driving / supporting the development product test diagnostics in conjunction with test application development
-5+ years direct Management experience leading a team of development and sustaining production Test Engineers as well as managing a staff of supporting technicians.
-Highly experienced in creating product test strategy and project planning
-Experience performing in the EMS (contract manufacturing) industry or directly interacting with EMS providers highly preferred
-Experience as a project manager directing and overseeing and driving on time delivery of supporting material with external suppliers.
-Prior experience performing as both supplier and customer is extremely helpful.
-Experience interacting with internal and/or external product designers, system architects, etc. to extract details. necessary to develop and propose the test strategy and methods; both hardware and software.
-Experience performing in a dynamic production test environment.
-Wide ranging exposure to products of different technologies; WiFi, data center, data storage, industrial electronics (semiconductor test and performance characterization electronics, medical and automotive, etc).
-Highly skilled in the use of MS Office applications.
-Ability to present proposals, performance metrics, project status, etc. both to internal management as well as customer team
-May analyze existing or customer proposed test strategies for efficiency and cost-down opportunities.
-Negotiating skills are very helpful to achieve desired results

Mathematical Skills:

-Ability to apply advanced concepts of algebra, statistics and geometry

Physical Demands and Work Environment:

While performing the duties of the job, the employee is regularly required to sit, stand and or walk for extended periods of time; use hands and fingers to handle materials, PCBAs, etc.; reach with hands and arms; and talk and hear. The employee must occasionally lift and or move up to 30 pounds unassisted and have steady hands and dexterity. Specific vision abilities required by this position include close vision, peripheral vision, depth perception and focus adjustment.
 
Job Number: 362271
Job Location: Milpitas, CA
Rate: $125k
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Engineer

Description:
Capable of obtaining a security clearance.

Experience with CAD modeling using PTC CREO, FORTRAN programming, and Siemens NX Thermal/Flow modeling. Experience with Matlab and MathCAD.
Experience in CFD modeling and analysis.

Experience with thermal design and thermal analysis of assembly systems, subsystems, and components. Demonstrated strength in thermal design and thermal analysis with a desire to learn more and demonstrated strong problem solving and analytical skills. Strong thermal analytical experience in all modes of heat transfer: conduction, convection, and radiation. Experience in analyzing thermal fluid network systems. Experience in electronic thermal management of electronic systems/subsystems. Proficiency with MFC standard 3D FEM thermal software (NX Thermal/Flow) or other 3D FEM/FEA software tools such as PATRAN thermal or ANSYS thermal/flow. Experience performing heat transfer analysis using analytical tools such as Excel, Matlab/Simulink, and/or MathCad
 
Job Number: 41219
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer (Creo)

Description:
Tool Designer
 
Location: Waterloo, IA
Duration: 3 years
 
Description:
Plans, coordinates and performs designs for complex components and assemblies using the preferred 3-Dimensional (3D) Computer Aided Design (CAD) tool and protocols. Uses technical judgment. May work with junior personnel to complete tasks.
 
Duties:
Plans, coordinates and performs design work for complex 3D engineering models and components. Exhibits detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T) Standards and can apply it to many varied situations. Performs as expert user of 3D Computer Aided Design (CAD) system with considerable experience in Top Down design work for complex 3D engineering models and components. May provide document maintenance and have responsibility for placement and routing of electronic circuits. May create Printed Circuit Board (PCB) fabrication drawings, plan PCB projects and create electronic schematic diagrams. Provides modeling leadership and counsel to other employees.
 
Specific Position Requirements:
- Minimum 5 years’ experience as a full time Tool Designer with experience in one or more of the following tooling areas: assembly, gage, machining, special machines
- Excellent working knowledge of 3D Parametric CAD, preferably Creo
- Ability to complete the design and detailing of a tool/fixture in Creo by following written and/or verbal descriptions and/or hand sketches.
- Excellent knowledge of manufacturing processes used in the manufacture of tools/fixtures and supporting components
- Excellent knowledge of materials used in the manufacture of tools/fixtures and supporting components.
- Working knowledge of hydraulics and pneumatics
- Ability to solve complex issues related to tooling
- Ability to use of Microsoft Word/Excel for daily tasks.
 
Job Number: 17-20099
Job Location: Waterloo, IA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 36 MONTHS
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 12/04/2017
Firm Name: ICONMA LLC
Attention: Prakash Thakur
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

Back to Advanced Job Search