Job Search Results

384 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/02/25 Sunday 07:21AM Pacific Time by ContractJobHunter. )

Listings 1 - 384

Go To My Job Tracker

Expand all descriptions

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2314 - AVIONICS SYSTEMS INTEGRATOR - cv - in word doc only

Description:
Responsible Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and
responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems;

Participate in the Avionics Systems architecture design to meet

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required;

Support the Final Assembly Line and In Service Aircraft for any development issues;

Manage, review and approve the deliverables of the Avionics System Suppliers;

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress;

Support other departments such as Production, Customer Support, Program Office and Product Planning;

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities;

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent;

At least three (3) years of relevant experience with the design,

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft;

Good knowledge of RTCA documents DO-178 and DO-160;

Familiar with part FAR25/525 certification process and with the ARP4754 standard;

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment;

Strong communication skills (written and spoken).

Be able to travel is a must - USA &Toronto.

English - French working knowledge an asset
 
Job Number: 2314
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wkp
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2320 - PROCESS ASSURANCE ENGINEER - cv - word doc only

Description:
Support the development and maintenance of process assurance plan(s).

Support the definition and development of the Bombardier Process Assurance processes, checklists and deliverables.

Plan, coordinate and participate in internal and supplier process assurance oversight activities.

Generate process assurance reports and process assurance findings as a result of the oversight activities.

Review and assess acceptability of corrective action plans addressing identified process assurance findings.

Conduct follow-up of corrective action plan implementation.

Collect measurements and provide metrics to support the development of regular visibility reports related to process assurance execution as well as oversight activity results.

Support the development and delivery of training to DADs / Integrators / Engineering Specialists in the Process Assurance methodology.

University degree in Engineering (or equivalent) with 5 to 10 years experience in the aerospace industry.

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Experience in the development or verification of aircraft systems (using ARP4754A/4761 or equivalent standard) is required.
(The candidate may also have experience in the certification, development or testing of Software or airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-178B or DO-254 or equivalent standard).

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Display strong interpersonal and professional demeanor as a business representative of the company.

Must be willing to travel to support the process assurance audit/inspection activities.
 
Job Number: 2320
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

Administrative Assistant 2

Description:
PDS Tech is seeking an Administrative Assistant for an open position in Roosevelt, Wa. 
In your role, you will: 

  • The Field Administrative Support (FAS) person will assist the site with warehouse logistics and administrative tasks.
  • This includes organizing and maintaining a warehouse, shipping and receiving, documentation review, electronic and physical filing, reporting, compliance paperwork, tool and parts management, facility organization and paperwork reviews. 

  • This position will require forklift operations and prior experience is preferred but not required.
  • This is an ideal position for someone who can operate independently and is a highly motivated self-starter that has an attention to detail.
  • Significant computer work with e-mail, Microsoft Office and SAP is part of the normal working environment.
  • Candidates must be able to work on their feet for long periods and regularly lift 50 pounds.

 
Job Number: 1610048928
Job Location: Roosevelt, WA
Per Diem: No
Duration: 11 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001yV4vAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Production Operator

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Advanced Production Operator
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-5019

Responsibilities:
• Perform project tasks of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Read and interpret moderately complex schematics and drawings
• Follow more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• Build or integrate hardware for prototypes, subassemblies or systems
• Perform more complex rework and refurbishment of hardware and systems
• Incorporate Master Change Order (MCO), Engineering Change Order (ECO), Variance Authorization (VA) and visual aids
• Perform more advanced fabrication and marking as well as
• Maintain and operates various equipment/tooling
• Perform inspection per documentation
• Complete appropriate quality paperwork as required (e.g. Corrective Action Request, Discrepant Material Report etc.)
• Accurately complete process paperwork and entering data into the applicable work order management system
• Support continuous improvement activities and participates in problem solving activities
• Maintain a clean and orderly work area
• Support safety/housekeeping standards
• Contacts are primarily within immediate work unit and direct supervisor
• Receive little instruction on daily work; general instructions only on new assignments
• May conduct manufacturing inspections on processing line in accordance to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions

Qualifications:
• Precision solder skills
• Previous certifications to J-STD_001 Space Addendum, or NASA 8739 is preferred.
• Solid manufacturing process skills, knowledge of polarity, inspection criteria, and Bills of Material (BOM)
• Able to work unsupervised and to accurately use manufacturing work order application
• Solid communication skills, both written and verbal
• Demonstrated time management skills
• Flexbile, adaptable, and works effectively on any size work team
• Solid computer skills and knowledge measuring/test equipment and math
• Able to use various computer software applications to analyze and manage data
• Able to interpret more advanced documents, work instruction, and schematics
• Solid knowledge of configuration control procedures applicable to the assigned work/area
• Able to lift a minimum of 15 pounds

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High School Diploma or equivalent is required plus a minimum of 4 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


PLEASE APPLY ONLINE: https://careers-moseleytechnical.icims.com/jobs/5019/adv-production-operator-2/job?mode=view
 
Job Number: 2017-5019
Job Location: Scottsdale, AZ
Duration: 18 Months
Input Date: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Electrician / Avionics - Secret

Description:
PDS Tech is seeking a Electrician/Avionics Mechanic  for an open position in Jacksonville, FL. 

Ability to efficiently read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. 

Ability to efficiently use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

Ability to efficiently assemble, modify, install and perform continuity tests on wire bundles, conductors and other quality electrical components.

Ability to apply knowledge of shop mathematics and electrical and electronic theories to aircraft repairs and troubleshooting of systems and subsystems.

Ability to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.

Ability to operate ground support equipment (GSE) and test equipment as required to perform assigned tasks.
High School Diploma or GED
 
Job Number: 1710079287
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023bFOAAY&URLSource=cjhunter

Aircraft Technicians - WA State

Description:
Major Manufacturing Program needs Aircraft Technicians for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Call 866-224-2745 Select Option 1
Email DirectHire@pdstech.com

Avionic / Electrical Test Technician

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

Qualifications:

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.


Fuel Cell Assembly Mechanic
Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.

  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
Qualifications:
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Please Apply and select which position you are interested in on the application.

Thank you, The PDS Tech Recruiting Team   

 
Job Number: 1710078720
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janet Rauseo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UUzAAM&URLSource=cjhunter

Aircraft Technicians - WA State

Description:
Major Manufacturing Program needs Aircraft Technicians for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Avionic / Electrical Test Technician

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

Qualifications:

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.


Fuel Cell Assembly Mechanic
Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.

  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
Qualifications:
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Please Apply and select which position you are interested in on the application.

Thank you, The PDS Tech Recruiting Team   

 
Job Number: 1710078849
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janet Rauseo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023VZSAA2&URLSource=cjhunter

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a  Assembler - Level 1 for an open position in Rocky Mount, NC.
FAA POSITION

  • Under immediate supervision, this position is responsible for repetitive to non-repetitive production assembly and testing. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications. Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems. Performs calibration and alignment checks, makes adjustments, modifications, and replacements as directed. At an entry level, follows well defined procedures. 



    • Use of precision tools, fixtures and measuring equipment to perform assembly, in-process inspections, calibration, and test of hydro-mechanical fuel controls in an aerospace production/quality environment. 

    • Follows all prescribed Health, Safety and Environmental rules and regulations. 

    • Performs work through the utilization of electronic work instructions, engineering and quality procedures, blueprints and other specifications. 

    • Reads, understands and works to Quality Procedures. 

    • Visually inspects parts and product for quality. 

    • Detects and reports faulty operation, defective tools and materials. 

    • Initiates action to prevent/correct product/process non-conformity. 

    • Maintain all required documentation and records accurately and in a timely manner.

    • Maintains work areas and tools according to Visual Management and 5S Standards.  .


 
  • Basic Qualifications: 

    • US Citizen 

    • High School Diploma 

    • Able to follow detailed assembly and test instructions consistently, and interpret blueprints/drawings. 

    • Ability to use precision measuring devices such as micrometers, dial indicators, dial calipers and depth micrometers. 

    • Ability to work with hand tools of different types. 

    • Basic computer skills with ability to navigate internet and MS office. 

    • Intermediate math skills 





    Preferred Qualifications: 

    • Minimum 2-3 years experience in an assembly and/or test manufacturing environment 

    • North Carolina WorkKeys Career Readiness certificate, Silver or Gold preferred 

    • Six Sigma training or certification 

    • Associates degree 

    • Able to work and communicate well with others. 

    • Excellent troubleshooting skills. 

    • Ability to work in a dynamic and fast paced aerospace production environment. 

    • Must be able to work in a team environment and solve issues at the lowest level. 

    • Knowledge and demonstrated adherence to 5-S principles 

    • Have led or actively participated in an continuous improvement manufacturing activity 

 
Job Number: 1810079819
Job Location: Rocky Mount, NC
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023eHaAAI&URLSource=cjhunter

Assembler \'A\' (3) - FL

Description:
Chipton-Ross is seeking an Assembler 'A' (3) for an opening in St Petersburg, FL.

Under minimum supervision, performs a wide variety of electronic and electro-mechanical subassembly and assembly operations of a semi-skilled nature to build up and assemble difficult and complex units such as power supplies, modules, chassis drawers, cable harnesses, electronic systems and subassemblies. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operation sheets, wire lists, samples, blue prints, schematic and verbal instructions to perform a wide variety of assembly operations such as wiring, component installation and hand soldering. Must be able to perform the essential duties and responsibilities with or without reasonable accommodation. The duties and responsibilities may change from time to time without notice and include but are not limited to the duties described below.

RESPONSIBILITIES:
Performs complex wiring, soldering and assembly of subassemblies and final assemblies.
Reads and interprets complex wiring diagrams, color codes, schematics and wire lists.
Builds harnesses of high complexity.
Terminates various multi-conductor and coaxial cables.
Utilizing a high degree of proficiency, wires and solders various components within circuits and chassis.
Performs mechanical assembly of high complexity chassis and cabinets.
Occasionally employs basic knowledge of electrical theory and its application to basic wiring and testing using voltage and ohmmeters.
Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required.
Sets up and operates automatic and semiautomatic assembly equipment.
May be required to perform continuity checks and rework.
Complies with ISO procedures and regulations. Maintains a safe and clean work area. Complies with company policies and guidelines regarding inventory control and timekeeping.

REQUIRED EXPERIENCE:
Must be proficient with all hand tools, basic mechanical inspection equipment such as calipers and indicators and electrical test equipment such as multimeters.
Must be proficient in soldering techniques, color codes and component identification.
Must be able to perform assembly calculations with accuracy.
Must be ability to read blueprints and work with small parts.
Requires understanding of concept of Work Orders and Bills of Materials.
Must be able to follow verbal instructions or procedures.
Must have knowledge of computer usage specifically Microsoft Office applications.
Communication skills are required for effective interface with all contacts.

EDUCATION:
High School or technical trade school graduate preferred, or training in military service graduate.

ADDITIONAL EXPERIENCE:
Requires a minimum of five (5) years of progressively difficult related electro/mechanical assembly and wiring experience.

WORK HOURS:
9/80, Full-Time
 
Job Number: 165634
Job Location: St. Petersburg, FL
Rate: Up to $16.75 DOE
Duration: 5 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanics (KS)

Description:
** 27 Needed ** Hot Job ** Wichita, KS **

Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures.

Functional test and correct, fit form and function of assemblies and components.

Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter’s (MTGR’s), Brotje’s , C-Frames, IPAC’s etc., to assemble components in accordance with engineering specifications.

Requirements:

Please provide answers to the following three questions at the top of each resume to expound on information already evidenced in the resume:

1. Explain your experience in the last 8 years on aircraft structural assembly.
2. Are you willing to work any shift?
3. Are you will to work overtime as requested?

Client is looking for a more experienced pool of contractors to support work on the 737 line. Looking for the highest level of talent available.

Must have at least 8 years of experience in structural aircraft assembly - preferably large structures. Boeing experience a plus.

Start pending results of contingencies

First three days will be spent obtaining Client certifications

Program team will identify any contractors exiting in December
Contractors will work in the 737 fuselage area.

Could be 'traveling' throughout the line to resolve/fix issues/rework so existing Client Employees can focus on their own assembly work.

Environment is busy requiring flexibility in as well as ability to work independently providing support wherever needed.

Level C - Assembly Mechanics

Must have structural riveting, sealing and wiring experience.

Much have the skill and knowledge to perform in all of the general functions of Assembly Mechanic:

Assembly/Installation Structures
Sub Assembly
Sealer

Each of the functional areas described below:

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures

Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies

Assembly / Installation Doors - Pre-Assemble, trim, fit, rig, seal, align, and adjust aircraft door systems
 
Job Number: FD-580503KS
Job Location: Wichita, KS
Rate: $33.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 3 months
Start Date: ASAP
Input Date: 02/08/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Cargo Supervisors - Hebron, KY

Description:
STS AeroStaff Services is hiring Aviation Cargo Supervisors in Hebron, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Job Summary:

This is a position for a working Supervisor repairing Aviation Cargo Containers and Metal Pallets.

Job Duties:

• Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
• Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
• Comply with FAA and company policies and procedures
• Ensure accurate and timely completion of work orders
• Ability to perform routine and non-routine tasks independently
• Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
• Maintain safe and clean work environment
• Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
• Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
• Provide feedback/suggestion to improve customer satisfaction

Qualifications:

• 3-5 years’ supervisory experience is required
• Aviation experience is not required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39799
Job Location: Hebron, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/11/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFLAA2&URLSource=cjhunter

Avionics Installer- 1st shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach
 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:
Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710078771
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Uf9AAE&URLSource=cjhunter

Avionics Installer- 2nd shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

 



Avionics installation or maintenance history required. Computer literate required. 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710073124
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Engineers - Orlando, FL

Description:
STS AeroStaff Services now offers Component Engineer jobs in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components
• Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records
• Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components
• Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems
• Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages
• Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance
• The candidate will periodically be required to make presentations to program management and customers

Qualifications:

• Five years’ or more of experience in Component Engineering
• Must be proficient with computer tools such as MS Excel
• Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position
• Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools
• Must have good communication skills and able to effectively work with manufacturers and other external part suppliers

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40989
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/02/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Components Engineer - Level 2 - TX - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

REQUIRED EXPERIENCE:
Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

PREFERRED EXPERIENCE:
Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 164049
Job Location: Dallas, TX
Rate: Up to $75.00 DOE
Duration: 12 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2 with active secret TX

Description:
Requirement#MFC-REQ-1421
Work LocationDallas, TX
Work Week9/80-A

Needed Date07/05/2017
End Date07/05/2018
Number of Resources1
Security ClearanceSecret (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)


TitleComponents Engineer - Level 2
Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.
Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Parts Management Working with designers to select components for use in designs.
0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
0-3 Years Yes


Interview RequiredYes
Max Pay Rate75.00 USD

Shift1st Shift
OT AllowedNo
TravelNo
Non-Exempt
Rate TypePer Hour
 
Job Number: JE-1421
Job Location: Dallas, TX
Rate: 75/hr max
Duration: 12 month contract
Input Date: 02/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 3

Description:
Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 4x10

**MUST have an Active Secret Clearance or have had one within the last two (2) years**

Description
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skills:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.

Skill/Experience/Education
Mandatory:
- Five years or more of experience in Component Engineering.
- Must be proficient with computer tools such as MS Excel.
- Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
- Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
- Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
 
Job Number: 7694
Job Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Components Engineer - Level 3 (3) - FL - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 3 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

REQUIRED EXPERIENCE:
Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 164497
Job Location: Orlando, FL
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Creo Product Definition & Verification (Checking) Designer III/IV (5) - CA

Description:
Chipton-Ross is seeking a Creo Product Definition & Verification (Checking) Designer III/IV (5) for an opening in Canoga Park, CA.

RESPONSIBILITIES:
Under limited general direction and following established procedures in accordance with contractual requirements and Client policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

REQUIRED EXPERIENCE:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

PREFERRED EXPERIENCE:
-ASME Certification in GD&T is a plus.

ADDITIONAL EXPERIENCE:
Creo
Geometric Dimensioning
Geometric Tolerancing
Windchill
Aerospace

Packaging Engineering
-Harness Cabling
-English: Read, Write, and Speak

EDUCATION:
-Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

WORK HOURS:
5/40, Full-Time

 
Job Number: 165612
Job Location: Canoga Park, CA
Rate: $DOE
Duration: 6 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Customer Service Specialist

Description:
PDS Tech, Inc. is seeking a candidate for Customer Service Specialist in Independence, OH.
  • Principal Duties: 

    • Remote first line level support of customer’s EMS via communication with onsite customers or technicians 

    • Provide resolution for set-point, schedule changes and connectivity issues 

    • Daily communication both verbal and written with the customer 

    • Perform alarm monitoring services for contract customers as defined in contract scope of work. 

    • Record and document all activities via internal ticketing system and customer work order systems 

    • Read, comprehend and maintain understanding of technical documents 

    • Provide mentoring and training for new Technician Level I technicians as appropriate 

    • Provide input to and implement process improvement changes as necessary 

    • Other duties as assigned 

    • May be required to work holidays or irregular shifts 

Basic Qualifications: 

• Minimum of high school diploma or GED 

• Technical diploma, or equivalent industry experience, or Associates Degree in Mechanical, HVAC or Electronic Technology 

• Experience in a technical service support role 

Additional Qualifications: 

• 2-5 years experience with troubleshooting techniques on technical equipment without supervision or assistance 

• Experience working with some or all of the following Niagara based EMS systems preferred 

• Demonstrated technical competence in energy management systems or server based IT environments 

• Ability to effectively communicate technical information to potentially non-technical customers both written and verbal delivering excellent service 

• Strong Interpersonal skills combined with logical problem solving 

• Strong knowledge of Microsoft Office suite of software 

As an Equal Opportunity Employer, we are committed to a diverse workforce. 
 
Job Number: 1710079430
Job Location: Independence, OH
Duration: 5 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023c4xAAA&URLSource=cjhunter

Document Control Coordinator - CA

Description:
Chipton-Ross is seeking a Document Control Coordinator located in Fremont, CA

RESPONSIBILITIES:
oFollow SOP's to meet compliance requirements for all document and QA activities.
oProcess changes through the Document change process.
oAdminister and maintain records.
oNumber issuance for validations, lab notebooks, and project files.
oManages the archiving process and inventory listings for on-site and offsite.
oReview document changes and provide effective communications of changes for site awareness and to facilitate training requirements and provide applicable site training.
oUpdate BOMs and Item Masters as needed.
oAdminister and maintain compliant periodic review scheduling and reporting.
oAdminister system updates to the document control system as required.
oCollaborate with departments to ensure QMS compliance and alignment of local SOP's as required with common Business Unit SOP's.
oGenerate weekly reports to trend data for improvements within the Document Management System
oStrategize within Quality and cross-departmentally to assess effectiveness of current document control processes and make recommendations for improvements

Desired Profile:
oScience or related degree.
oDemonstrated troubleshooting and problem-solving techniques.
oProven ability to work under tight deadlines and pressure in a composed manner.
oComfortable communicating with all levels of staff, including executives.
oStrong technical writing skills.
oEffective organization, communication, and team orientation skills.
oExperience in Quality roles (CAPA, NCARs, & Change Control).
oImplementation of an Electronic QMS database.

REQUIRED EXPERIENCE:
oWorking knowledge of US / EU regulations and guidelines, including 21 CFR Parts 820, ISO 13485, IVDD, and audits.
oKnowledge of computer applications and current software (Microsoft Excel, Outlook, Word, Access, and PLM/ERP system).

EDUCATION:
Accredited High School Diploma/GED and equivalent 3 - 5 years' of related experience in fast-paced office manufacturing environment

Accredited Associate's degree from accredited college/university or equivalent experience.

WORK HOURS:
Full-Time

 
Job Number: 167562
Job Location: Fremont, CA
Rate: Up to $16.37 DOE
Duration: 10 MONTHS
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Mahta Eslami
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: meslami@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
•Location; Midwest Oklahoma
•Must have a Bachelors in Engineering
•DOD Clearance is NOT required
•This position will support our Air Traffic Control and Landing Systems (ATCALS) and B-1 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will work under the direction of a lead engineer to:
• Provide technical solutions and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders

Additional Details:
•Candidates must be a U.S. Citizen
•Full Time – Non Exempt
•Ensure candidate experience relates to that provided in job description and experience is clearly identifiable on resume for client review
•Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.
•Start date will be moved up as needed in order for selected candidate to start ASAP once on-boarding is completed/clear and final clearance is obtained.
•Be sure your candidates are available to start right away once on-boarding is complete.
•Worker will utilize DelTek for weekly time reporting. It is imperative that the registration is completed as soon as possible after receipt of registration invitation. Your attention to this process will eliminate delays in receipt of worker hours and invoice creation.
•There is a chance for some OT (overtime) as needed and must be approved by KBRwyle supervisor
•Client manager will conduct phone and in-person interview.
 
Job Location: Midwest, OK
Rate: $29-32
Overtime: Possible
Duration: Full Time – Non Exempt
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (seats/aerospace)

Description:
Essential Duties and Responsibilities include the following with other duties as assigned:
•Perform design assignments in accordance with established design standards under supervision.
•Assigned design tasks include but not limited to: basic aircraft electrical design, wiring installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and internal specifications.
•Works under the direction of an experienced engineer, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
•Participates in teams to support the development of designs. Supports the documentation of design implementation.
•Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
•Obtain, interpret, and analyze OEM airplane electrical design data.
•Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
•Troubleshoots basic electronic/electrical system/subsystems problems.
•Actively support engineering department goals and initiatives.
•Coordinate with other departments as necessary.
•Utilize internal drawing/document standards per customer or regulatory agency requirements.
•Some domestic or international travel may be required.
•Perform engineering design check and sign documents. With periodical technical guidance from mentor and lead.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: NUWEST GROUP
Attention: Jessica
Address: 325 118TH AVE SE STE 300
City, State: BELLEVUE, WA 98005
Phone: 425/602-5700
Website: www.nuwestgroup.com

Electrical Engineer - IN

Description:
Chipton Ross is seeking an Electrical Engineer in Batesville, IN.

JOB SUMMARY:

Provide technical support of post-commercialized product across the organization within the electrical and electronics expertise. Support of product design including: improvements in product functionality, cost, quality, and manufacturability. Provide technical expertise and communication with all segments of the business including marketing, field service, production, purchasing, testing engineering, electrical engineering, codes and standards, and quality.

RESPONSIBILITIES: - Other duties may be assigned:
o Develop and revise the requirements for electrical modules and systems
o Design and document electrical modules including circuit board, electro-mechanical components, sensors, I/O, and cables.
o Support the creation of testing requirements for verification and validation
o Maintain manufacturing test requirements and support the manufacturing engineers to produce the product
o Design, develop, and verify, through test and analysis, various sub-assemblies and components to improve margins on existing medical devices
o Accurately document designs through the creation and maintenance of design requirement specifications, product drawings, component drawings, material specifications and bills of material in accordance with FDA, UL, and ISO requirements
o Completes activities with robust performance through a project plan and schedule
o Create and maintain project financials, including costed BOMs, CAPEX and OPEX
o Generates detailed, high quality technical documentation to capture and communicate designs
o Completes assigned tasks on time with minimal supervision
o Informs others proactively about developments or issues that affect their work, and their ability to meet commitments
o Uses collaborative communication style to negotiate win-win outcomes
o Debate constructively and accepts ideas from others
o Tends to be seen as original and value-added in brainstorming sessions
o Generates alternative solutions to problems or processes
o This role does not have supervisory responsibility

Requirements:
" BS Degree (preferably EE/EET)
" 6+ years of engineering experience, or comparable experience. Electrical experience with hardware and PCBAs design.
" Familiar with design control requirements and test methodologies for UL, FDA, and ISO
" Experience with project management is required
" Familiar working with simulation tools (i.e. Multisim)
" Strong organizational and communication skills
" Strong interpersonal skills with the ability to work collaboratively with others in a team environment
" Experience in the medical device industry and FDA regulation is preferred
" Thrives on change and adapts to leader initiated changes
" 4+ years working in cross functional teams consisting of discipline specific engineers, or comparable experience

EDUCATION:
" BS Degree (preferably EE/EET)

SCHEDULE:
" Full time

 
Job Number: 167817
Job Location: Batesville, IN
Rate: $40.44 to $58.82 DOE
Duration: 10 months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Instrumentation Design-WIC04197

Description:
PDS is looking for a Electrical Engineer - Instrumentation Design

In your role, you will: 

  • Design, verify, support, and troubleshoot measurement and data systems for flight test vehicles
  • Create and maintain wiring diagrams for flight test equipment and systems
  • Document procedures, calibrations, and special instructions to support flight test activities

 






 











Qualifications
As our ideal candidate,
  • You must have a BS degree in Electrical Engineering or Electronic Engineering Technology
  • Experience with airborne acquisition systems, including L3, TTC, or Acra (preferred)
  • Knowledge of strain gages, telemetry, PCM systems, networking, video and audio systems, wiring diagram drafting, calibrations, and laboratory equipment (preferred)
  • Flight test experience (preferred)







 
Job Number: 1810079600
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023d62AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer – Level 3

Location: Cape Canaveral, FL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**


Job Description / Responsibilities:
-The Electrical Engineer Level 3 will prepare and coordinate predominantly Electrical design, construction and troubleshoot interfaces for launch facilities electrical systems and support equipment installations at CCAFS for this Company.
-The successful candidate, as part of Company's Engineering and Infrastructure Team, shall be required to produce accurate working schematics and detailed design drawings as well as generate validating electrical analysis calculations.
-He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases to produce accurate drawings for implementation of the project.
-Candidate will ensure all projects are maintained on implementation schedules and within established engineering budgets.
-May conduct feasibility studies, determine engineering criteria or manpower and cost estimates for projects or tasks, or perform analyses to develop design/redesign options, improvements, or recommendations for systems and components.
-Evaluate components for life assessment and market requirements.
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Actively supports system operation, trouble shooting and maintenance.
-This position requires knowledge of Electrical design of commercial medium voltage equipment and systems, drafting practices as well as a sound practical knowledge of engineering principles, practices, and industry standards including NFPA 70e and NEC codes.
-Candidate shall have the ability to successfully interface with contractor personnel which requires onsite observation and direct contact in the field working with Union Workforce personnel.

-Duties shall include, but not limited to, Contractor walk downs, Request for Information evaluation and resolution, Statements of Work and Field Work Directives development.
-Bachelor's degree highly preferred

-The successful candidate should have at least (10) years of relevant experience building and/or modifying facilities electrical systems.
-Also, he/she should have at least (5) years of recent Autodesk AutoCAD experience (version 2013 or newer).
 
Job Number: 8439
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

Electrical Engineer 2 - WA

Description:
Chipton-Ross is seeking an Electrical Engineer 2 located in Bingen, WA

RESPONSIBILITIES:
Analyzes and interprets electrical system/subsystem requirements and specifications. Develops requirements and specifications for printed circuit board assemblies. Performs risk assessments and makes mitigation recommendations. Decomposes system requirements. Creates electronic hardware module-level architectures. Develops detailed electrical hardware and firmware designs. Identifies electronic hardware interface controls conflicts and makes recommendations. Creates electronic hardware documentation release packages. Develops and performs verification and validation procedures for electronic hardware components. Conducts testing/ analysis of avionics/electrical components, equipment, and systems. Documents technical performance metrics. Diagnoses malfunctions in existing products and makes design improvements and/or modifications.

REQUIRED EXPERIENCE:
"Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).
"Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog). Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
"Knowledge of electrical engineering theories (e.g., Kirchhoff's Law, Ohm's Law, lighting, power factor, control theory), formula selection (e.g., room cavity ratios, short-circuit, voltage drop, motor counts, capacitor, harmonic correction, load calculations), and methods (e.g., relay coordination, root cause analysis).
"Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
"Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity. Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.
"Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

EDUCATION:
This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Typical experience: 2-4 years in an engineering classification with a Bachelor's degree or 0-2 year's experience in an engineering classification with a Master's degree.

WORK HOURS:
Full-Time

 
Job Number: 165599
Job Location: Bingen, WA
Rate: $DOE
Duration: 6 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065208
Job Location: Houston, TX
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Designer

Description:
Job Summary:
Performs a wide variety of highly complex technical tasks which requires knowledge of engineering techniques and mechanical design theory in the creation of computer models to determine design solutions for electronic equipment and systems. Assists in the modifications of engineering design prototypes and/or first article electronic equipment in preparation for production design release of product. Assists in the creation of design documentation and release of documentation into the enterprise business systems.

Job Responsibilities:
- Performs the preparation of required records for the release of design data and design documentation into the company data and documentation control systems.
- Under general supervision: Performs a variety of highly technical tasks which require a substantial understanding of technical engineering techniques to create precision mechanical or electrical design layout per verbal instructions, sketches, existing hardware or engineering lab models, received from both mechanical and/or electrical engineering and other technical support personnel.
- May assist engineering in determining and employing proper specifications for materials, finishes and processes, connectors or other electrical components, etc. during the design process.
- Applies Company, Industry and Contractual standards during the preparation of hardware design and documentation data.
- Completes the preparation of the necessary technical documentation for the release of Hardware design data into the company documentation control system.
- Assists engineering in the preparation of data & documentation during the revision of released artifacts in the document control system.
- Maintains an awareness of contractually controlled Government and/or Company design and documentation requirements building knowledge in supporting the completion of assigned tasks.
- Has an intermediate understanding of the CAD and data management tools to enable completion of design tasks.
- May provide validation of change definition artifacts for revisions to existing design and drawing/documentation.
- May provide validation of revision capture definition into formal design and documentation data in accordance with defined change requirements.

Job Specific/Job Description Additions:
- Design interfaces that link groupings of individual COTS products into integrated systems
- Design and produce documentation to build cable per company standard
- Prepare Design Documentation for electro-mechanical interconnect assemblies
- Provide monthly estimates of completion for assigned work to a Cost Account Manager
- Relationships - Able to interface well with multiple engineering and operations disciplines on a daily basis.

Skills/Experience:
REQUIRED: Experienced with AutoCAD 2011 + to create schematics and cable assembly drawings.


PREFERRED: Training Simulator Design Experience a plus
PREFERRED: Working Military Contract Experience
PREFERRED: Lotus Notes experience
**PREFERRED: SolidWorks 2011 or greater (new, added 10/24)
 
Input Date: 01/10/2018
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III

Orlando, FL
$53.00/Hr
1 Year Contract

MUST HAVE AN ACTIVE SECRET CLEARANCE

1st Shift


Description

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


Skill/Experience/Education

Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

Desired:

CREO,
 
Job Number: 7719
Job Location: Orlando, FL
Rate: 53.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237QZAAY&URLSource=cjhunter

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
 
Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1510015749
Job Location: Redmond, WA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

Electronic Installer 1

Description:
PDS Tech, Inc is seeking a candidate for the Electronic Installer 1 position located in St. Rose, LA. 
  • Assists with routine equipment installation, trial runs and service activity runs to ensure that it meets specifications.
  • Provides assistance with training customers to maintain and adjust routine equipment.
  • Performs routine maintenance on tools, test equipment, etc. and completes required service or systems paperwork.
  • Assists with responding to routine service or systems calls. 
  • Performs or assists with installation and checkout of electric and electronic components for systems and service installed jobs and service agreements associated with automatic building controls systems, fire management, security CCTV, audio and energy management systems. 
  • Installs or assists with the installation of conduit, wire, cable, equipment, components and devices associated with fire, security, and energy management systems.
  • Installs and mounts electric / electronic controls, devices, panels, sensors and components.
  • Performs interlock wiring, wiring check out and assists with system start up. 
  • Coordinates with or advises supervision about requirements for material and supplies to ensure timely delivery to job site. 

Knowledge, Skills, and abilities:
High School diploma or GED.
Associates degree or other technical training and mechanical aptitude preferred.
Good verbal and written communication skills.
Must be physically able to climb, work in high and or confined spaces.
Must not be color blind.
QualificationRating
Must Have
Education
HS *Yes
Industrial
LIFT-MODRT *
     

  and 0 Yrs.
Industry
I-INSTRMNT
     

  and 2 Yrs.
Nice to Have
Industrial
ELECT-TRAD
     

  and 2 Yrs.
Industry
I-HVAC
     

  and 2 Yrs.

 
Job Number: 1710071867
Job Location: Saint Rose, LA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239EmAAI&URLSource=cjhunter

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Assembler (6) - RI

Description:
Chipton-Ross is seeking an Electronics Assembler (6) for an opening in Ashaway, RI.

Under the direction and guidance of the Production Supervisor, the Electronics Assembler, routes, wires, assembles and installs electrical and electronic components in military sonar systems and commercial equipment according to specifications, using fixtures and jigs, hand tools and equipment. Reads work instructions, drawings and specifications to determine assembly methods. Solders surface mount components to printed wiring using microscopes and hand soldering devices.

RESPONSIBILITIES:
Essential Functions:
1. Responsible for assembling and handling products, equipment and materials per engineering and company's quality system procedures.
2. Perform program specific tasks as required to ensure compliance to individual program requirements.
3. Assemble printed wiring boards from engineering drawings and sketches using surface mount hardware, soldering irons and microscope.
4. Cut wire to specified lengths, using wire cutters.
5. Cut plastic sleeves and slip sleeves over wire ends to insulate connections.
6. Crimp terminal eyelets and lugs to wire ends, using hand or machine crimping device.
7. Route, comb, twist, wrap, tie and attach wire to terminal points, according to layout, using soldering iron and hand tools.
8. Connect wiring to accessories, such as connectors, circuit breakers, plugs and switches and install accessory assemblies in electrical or electronic units, using soldering iron and hand tools.
9. Conducts functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
10. Pot or encapsulate electrical and electronic components and assemblies.
11. Follow company procedures for corrective action. Notify Production supervisor if a defect is identified to obtain guidance and assistance in resolving the problem.
12. Responsible for following procedures for product assembly/fabrication, equipment operation and sound safety requirements as documented in the company's quality system.
13. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

REQUIRED EXPERIENCE:
Certificates and Licenses Required:
-Valid state drivers license.
Knowledge, Skills and Abilities:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

ADDITIONAL EXPERIENCE:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

Physical Demands:
1. Exerts up to 20 to 50 lbs. of force occasionally, or up to 10 to 25 lbs. of force frequently, or up to 10 lbs. of force constantly to move objects.
2. Excellent manual dexterity is required to operate the technical instruments and equipment appropriate to assembly.
3. Employee regularly sits while using upper body movements including arms, hands and fingers constantly in handling tools and equipment necessary to assemble and install electrical and electronics components in military sonar systems and commercial equipment. Also, working on computers and other office equipment.
4. Employee occasionally stands and/or walks and reaches with hands and arms in moving tools, equipment and/or products.

Other Work Conditions and Requirements:
1. Employee works in a quiet to moderately noisy environment.
Network Analysis:
1. Directly provides support to the Engineering and Operations Departments.
Scope information:

PREFERRED EXPERIENCE:
Experience preferred in related field, but not necessary.


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 164681
Job Location: Ashaway, RI
Rate: $15 to $22.00 DOE
Duration: 2 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Engineering Support Specialist

Description:
PDS Tech Inc is seeking an Engineering Support Specialist for an open position in Baton Rouge, LA

Assists all levels of engineers with their tasks and assignments.
 *** High School Diploma or GED required and 1 year of relevant experience or Associate's Degree in Electronics, Instrumentation, or IT related field 
 
Job Number: 1710079372
Job Location: Baton Rouge, LA
Duration: 9 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023bu9AAA&URLSource=cjhunter

Engr Technical Specialist 1 -

Description:
PDS Tech is seeking a Engineer Technical Specialist for an open position in Hazelwood, MO
In your role, you will:

  • Position consists of providing inventory support to users of engineering product components, and various assets.
  • Assists Subject Matter Experts in the identification and validation of components to retain or divest prior to organization move to another building.
  • Assists with the day to day activities related to the move for BGS.
  • Develops reports and lists of target items to enable ongoing activities while move is being executed.
  • Work with detailed direction and oversight initially, then independently as the project progresses. 

Associates Degree in electrical/electronics and/or experience in properly handling ESD Sensitive Components.
 
Job Number: 1810079766
Job Location: Hazelwood, MO
Duration: 3 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023e6NAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS SYSTEMS / SOFTWARE ENGINEER

Description:
ENEA is working with a client to provide System Software Analysis on Flight Management Systems (FMS). We are looking for an engineer with direct FMS experience and has functional expertise in one of the following areas: Performance, Navigation, Guidance, or Communications/DataLink.
RESPONSIBILITIES:
• Perform system optimization and assess overall performance through the use of in-house or custom-developed analysis tools.
• Compare the performance of architecture variants and conduct trade studies.
• Mentor and work with junior analysts as part of larger study teams.
• Apply broad and/or deep experience with customer aerospace systems and technologies in one or more specific functional areas (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide expert advice within a specific technology or functional area (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide support for growing modeling and analysis capabilities in new support areas.
• Interact independently with program office and customer organizations.
• Creatively and effectively apply analysis to problems as needed.
BASIC QUALIFICATIONS:
• BS degree in Engineering (preferably Computer Science or Electrical Engineering)
• 10+ years’ experience in Systems and Software Engineering.
• Substantial experience or background in one of the following areas: architecture performance analysis and modeling; optimization and/or decision support; communications systems analysis; electronics systems analysis, software and/or simulation development.
• Excellent written and verbal communication skills.
• Dependability and good interpersonal skills.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive to Medical and Avionics. We have offices in Europe, North America, and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
Enea Software and Services, Inc.

(Enea) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Enea complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Enea Software and Services, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Enea’s employees to perform their job duties may result in discipline up to and including discharge.
 
Job Number: WW011118GE
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 3-6 MONTHS
Start Date: 1.22.18
Input Date: 01/15/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com

Facilities Project Admin 4 - (2) - CA

Description:
Chipton-Ross is seeking 2 Facilities Project Admin 4 located in Huntington Beach, CA

RESPONSIBILITIES:
Directs construction of contract strategy and approves contracts for high-impact projects. Evaluates contractor proposals for fair and reasonable cost. Administers contractor activities. Participate in contractor selection, contract change negotiations, constructability reviews, and cost/schedule visibility such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Oversees and lends technical expertise to less experienced employees. Directs and integrates high-impact facilities projects. Obtains facilities design and resources commitments. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits. Finalized work package will provide documents to implement the project. Oversees and lend technical expertise to less experienced employees. Evaluates requests and meet with customer to define requirements for high-impact projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements. Creates layouts and conceptual designs. Ensures compliance with Client and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Oversees and lends technical expertise to less experienced employees. Directs and ensure completion and retention of records for high-impact projects by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Oversees and lend technical expertise to less experienced employees. Directs and integrates high-impact project implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Oversees and lend technical expertise to less experienced employees. Receives customer requests for high-impact facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Assigns priorities and logs request into work management system in order to document, track, and perform work.

EDUCATION:
Accredited Bachelor's degree and typically 10 or more years' related work experience, a Master's degree and typically 8 or more years' related work experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
7 AM - 4 PM

 
Job Number: 166036
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Flight Test Technician 3- Secret

Description:
PDS Tech, Inc. is seeking a Flight Test Technician 3 in Patuxent River, MD.  

The successful candidate will perform a variety of aircraft maintenance.  The maintenance includes but is not limited to avionics, electrical, instrumentation, engine, hydraulic,  airframes, and other mechanical systems and subsystems.  Maintenance actions will include troubleshooting and diagnosing malfunctions, disassembly, wiring repair, wire harness manufacture and routing, engine repair and upkeep, composite repair, hydraulic systems rework, braking systems rework, repair, replacement, re-assembly or adjustment of various Air Vehicle systems in accordance with technical specifications, engineering instructions, service instructions, and processes and procedures.  Modification work will include installation, upgrades to, and the removal of components.   Additionally, the candidate will be expected to complete all required documentation such as records and maintenance work documentation and 4790.2 maintenance work documentation.
 
Performs developmental, experimental and production aircraft maintenance, repair, modification, installation, and testing tasks in a field of specialization; electrical / electronic, mechanical or instrumentation. Instructs, coordinates and performs the duties / functions of Flight Test personnel in area(s) of assignment. Determines the sequence for installing, removing, maintaining, repairing or fabricating critical aircraft components, or electrical / electronic, mechanical or instrumentation systems. Performs testing, rework and repair in various fields of specialization. Applies shop theory and skills in accomplishing assigned tasks working from incomplete engineering, electronic data, blueprints, sketches, engineering drawings, technical orders and written and verbal instructions. Works from blueprints, engineering orders, schematics, repair manuals and other technical documents on aircraft electrical / electronic, mechanical, plumbing, and hydraulics, power plant, structures or instrumentation systems. Performs drilling, reaming, fitting, assembly, trimming, riveting, splicing, insulating and other associated duties as assigned. Performs electrical, mechanical or instrumentation maintenance, repair and testing in support of specific flight test projects. Constructs, troubleshoots, calibrates, adjusts, tests, and maintains various types of complex aircraft equipment, components, devices or systems. Performs modifications and adjustments as necessary. Notifies lead personnel or supervision of any / all malfunctions, defects and damages of equipment, material and product. Checks work for completeness and accuracy. Performs Production Accountability duties associated with the processing, verficiation, quality auditing and inspection of assemblies, parts and tooling for which the individual has been delegated production accountability. May be required to work in other fields incidental to, and in connection with completion of assignment. May be required to perform other related duties as assigned.
 
AA or other 2 year technical degree in related discipline and 3 years of related experience. Or 8yrs of related experience in lieu of degre

 Active DoD Secret Clearance is required 

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 

 
Job Number: 1710071747
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238tfAAA&URLSource=cjhunter

Government Property Administrator - MN

Description:
Chipton-Ross is seeking a Government Property Administrator located in Minneapolis, MN

RESPONSIBILITIES:
Applies functional knowledge and experience within the Aerospace Administrative, Engineering, and Integrated Supply Chain organizations.
Leverage depth of knowledge within the Government and customer asset management communities.
Core competency in maintaining Government approved business systems that are fully compliant with Government, customer, and contractual requirements, as well as pertinent Aerospace policies and procedures.
Actively supports and/or manages Self Assessments of the 10 Government Property Management Outcomes are identified Federal Acquisition Regulation (FAR), specifically FAR 45 and 52.245-1
Ability to function under minimal direction: Guided by specific objectives or statements from contracts and Statements of Work (SOWs), contract deliverables, and outcome metrics.
Adhere and perform to Organizational Goals and receives general guidance on how to accomplish them.
Direct responsibilities impact the Aero site's business system compliance, which affects the ability of site to qualify, perform, and invoice Government contracts.
Supports unit objectives, work plans, schedules, and ensures completion of established requirements and assignments.
Provides oversight to overall Aero risk mitigation and compliance integrity.
Develops and ensures execution of corrective action plans.
Actively supports the Sites Property Coordinator/Custodian Committee meetings.
Develops and prepares metrics and related reports using Visual Management techniques and analyzes metric data to enhance current processes.
May actively participate in site leader's HOS Tier 4 accountability process as a functional manager.
Supports internal Tier accountability boards and escalation model/processes, as applicable.
Actively participates CLIENT Operating System (HOS), CLIENT well Operating Model, Six-Sigma, CLIENT User Experience (HUE), Root Cause Corrective Actions (RCCA), Gemba walks, Kaizen (Continuous Improvement) teams and other related tools in problem solving activities.
Acts with authority delegated from Site Leader and/or GPSM (Government Property Site Manager) all functions within Aero site.
Works cross functionally to justify and seek agreement of other parties on compliance practices, policies and standards.
Management of change - coordinate with site stakeholders to implement process changes affecting cross functional groups.

Scope:
Tactically supports the requirements identified within the sites Statement Of Work (SOW). Responsible for maintaining and working to site budgets, provides requirements in updating and generating new Basis Of Estimates (BOE's), cost/benefits analysis and risk assessments.
Has operational and budget responsibilities to achieve year-end contractual goals, and tactical responsibilities to audit performance from various compliance auditors (internal and external).
Tactically supports multiple local CLIENT Technical Solutions Inc. (HTSI) contracts under delegated authority with multiple functions that contribute to services of Global Asset Management (GAM) for CLIENT Aerospace.
Supports implementation and execution of multiple HTSI contracts.
Supports job family strategies used to perform work.
Responsible for providing input into developing new Global Asset Management (GAM) services.
Responsible for driving improvements in site processes, and cost reductions.

Key Success Factors:
To be completed during the job posting process.

Attributes/Skills Required/Sought:
Must possess organizational skills and experience with the Defense Contract Management Agency (DCMA) audits, knowledge of the Federal Acquisition Regulation (FAR), specifically FAR 45 and 52.245-1
Greenbelt certified or the ability to obtain Greenbelt certification.
Strong PC skills especially with Microsoft Office Applications including Word, Excel, PowerPoint.
Familiarity with SAP, AssetSmart Property and Equipment Management System (PEMS) or electronic data tracking databases is recommended.

REQUIRED EXPERIENCE:
Candidate must have Property Asset experience

EDUCATION:
Accredited BS degree preferred with 5 or more years of progressive experience. NPMA Certification Required. Specific contract requirements regarding education and experience

WORK HOURS:
Full-Time

 
Job Number: 167709
Job Location: Minneapolis, MN
Rate: Up to $21.54 DOE
Duration: 6 MONTHS
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Mahta Eslami
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: meslami@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Engineer

Description:
HVAC Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:

The Mechanical HVAC Engineer will produce moderately-complex technical designs and some analysis mechanical to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

The successful candidate should have at least 15 years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial HVAC systems. Experience with chilled water and DX systems, ventilation and air distribution required. Engineer shall perform engineering thermodynamic, heat transfer and fluid/gas dynamic calculations. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The successful candidate should be self-motivated and able to work productively without constant direct supervision. He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments. Some outside work climbing stairs and accessing ladders will be required. He/she may need to work at heights on launch structures and facility catwalks. The successful candidate shall be willing to support second/third shifts and weekends as required.

Skills:
This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
A Bachelor’s degree from an accredited college in Mechanical Engineering and 15 years of applicable experience is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience shall also be considered. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8429
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

I/C SYSTEMS PROJECT ENGINEER - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

Lead Laser Controls Senior Software Developer-OM

Description:

Lead Laser Controls Senior Software Developer

Chipton-Ross is seeking a Sr. Software Developer Lead capable of leading the development of the High Energy Laser control systems, signal and image processing programs.
This individual will also lead new business pursuits related to both airborne active and passive multi-spectral EO/IR sensors for surveillance, targeting, laser acoustic signal processing, 3D LIDAR image formation and mapping, and target recognition located in Rancho Bernardo, CA.

DUTIES AND RESPONSIBILITIES:
Provide technical leadership to a software development team for High Energy Laser control system development.
Manage schedules and report progress to program leadership.
Responsible for leading the development of High Energy Laser control systems including leading a team of developers, developing a system architecture that includes subsystem and segment interfaces, such as battle management, safety, and fire control.
Specify throughput, processing architecture, and I/O bandwidth requirements.
Support field tests.
Provide schedule, tasks, and work definitions for software implementation.
Represent GA-EMS LAS SWIPE group to customers internal and external on technical approach and schedule.
Identify risks and solutions necessary to meet demanding program schedules, recommend approach that moderate risk while meeting overall performance requirements.
Provide technical briefings to internal and external customers.
Provide technical documents on design and performance analyses.
Performs other duties as assigned of required.


Essential Qualifications:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.


Hard Requirements:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Ability to obtain and maintain a Security Clearance is required.
The successful candidate will have a wide range of experience developing complicated software systems distributed among heterogeneous computing environments.
Demonstrated knowledge of VxWorks and Linux is required.
In-depth knowledge of embedded hardware and software is required.
Extensive knowledge of C and C++ is required.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.
Able to work extended hours as required.

MISC:
Able to work extended hours as required.
Duration: 6 month temp to hire

San Diego, California
Work Week: 5/40


About the client:
Client, and its affiliated companies, is one of the worlds leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

Cleint's Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide.


 
Job Number: 165947
Job Location: San Diego, CA
Rate: $DOE
Duration: 6 months Contract to Perm
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 2

Description:
MP&P Engineer 2

Location: Huntington Beach, CA
Duration: 12+ months

Description:
Client Research & Technology is seeking a Materials, Process and Physics Engineer to function out of the Huntington Beach, California location.
The main focus of this job is to perform cross-sectioning and metallography. The position requires metallurgical and metallographic knowledge of various metals, ceramics, composites, and electronic components like diodes, capacitors, inductors, integrated circuits, transistors, etc. Some experience in the disassembly of electronic devices, such as delidding and decapsulation, is also preferred.

Responsibilities include the following:
- Assess electronic components, circuit card assemblies (CCA), and printed wiring boards (PWB) for defects and/or failures.
- Cross-section components, CCAs, and PWBs - Mount and polish using various polishing materials.
- Use metallographs to take high resolution images for analysis.
- Look for cracks, voids, and solder voids and fillets.
- Perform fracture analysis if needed.
- Analyze data, make recommendations, and write comprehensive reports.
- Coordinate and implement new engineering principles, theories, advanced technologies and concepts.
- Maintain laboratory supplies and order as needed.
- Implement lean principles and technologies.

Education / Experience:
Bachelor's degree and 2 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Preferably experience in cross-sectioning and metallography, familiarity with electronic components, CCA, and PWBs, have some knowledge of metallurgy and chemistry, and excellent verbal and written communication skills.

Skill Code: 6B2-Electrical MP&P
 
Job Location: Huntington Beach, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 01/19/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Mail/Finishing Level 1

Description:
PDS Tech, Inc is seeking a candidate for the Mail/Finishing Level 1 position located in Bethlehem, PA.  
Receive, sort and process mail documents, packages, and supplies.
Notify recipients Deliver and pick-up mail on scheduled runs
Record & process accountable mail information, maintain logs
Track, trace, and resolve mail problems with USPS, express and local delivery services
Prepare mail and packages for external shipment and coordinate deliveries and pick-ups (may include USPS pickup/delivery)
Perform quality checks on outbound mail
Validate internal mail addresses Bar code address lookup
Use common mail services including fax , air express, postal services
Fill out shipping forms and/or enter electronically in shipping terminal per the job ticket
Perform finishing work on documents to be mailed, such as folding and insertion
Perform electronic mail distribution (open, mail prep, scan and distribute)
Perform fulfillment functions, such as assembly, packaging, shipping and tracking of kitted materials
Follow mailroom security procedures
Barcode tracking or face scanning incoming mail and packages
Perform logging, transmission, receipt and timely distribution of faxes
Shipping and receiving using automated system to track and manage activity
Monitor/order/replenish supplies inventory, mail and distribution activities
Send and receive e-mail messages
Arrange alternative courier or shipping services to meet customer requirements
Fully operate, clean and maintain all shipping and mail equipment
Contact service on mail and shipping equipment if need occurs
Determine output packaging per packaging standards (e.g. process for books, tabs, etc.)
Driving (if required)
Utilize mail equipment per training ; for example: -- Finishing equipment -- Inserters -- Postage meters -- Envelope printers -- Scales -- Pitney Bowes Mail Management systems -- FedEx shipping systems

SKILLS: 
Able to lift and move up to 50 pounds
Able to demonstrate ability to read, write and follow
English instructions
Able to demonstrate PC / Internet Skills Basic -- Open applications -- Create and find file folders -- Find, open, rename files using Windows Explorer (or equivalent) -- Delete and recover files -- Open and send e-mails (create mail, add, save attachments) -- Manage email (create folders, change user options) -- Basic internet navigation (search; navigate to websites; navigate within website)
 Introductory knowledge of MS Word or equivalent (open saved files, create basic text documents, print and save documents) -- Introductory knowledge of MS Excel or equivalent (open saved workbooks, data entry, basic data and column/row formatting, print and save workbooks)
Able to demonstrate customer service and communication skills
Able to demonstrate ability to manage multiple tasks
Able to demonstrate ability to perform duties with minimal supervision
Able to demonstrate ability to perform Data entry 

EXPERIENCE: 
Experienced delivering services in a client environment 

EDUCATION: Minimum: High School diploma or equivalency 
 
Job Number: 1710077158
Job Location: Bethlehem, PA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PT3AAM&URLSource=cjhunter

Mail/Finishing Level 1

Description:
PDS Tech, Inc is seeking a candidate for the Mail/Finishing Level 1 position located in Canonsburg, PA.  
Receive, sort and process mail documents, packages, and supplies.
Notify recipients Deliver and pick-up mail on scheduled runs
Record & process accountable mail information, maintain logs
Track, trace, and resolve mail problems with USPS, express and local delivery services
Prepare mail and packages for external shipment and coordinate deliveries and pick-ups (may include USPS pickup/delivery)
Perform quality checks on outbound mail
Validate internal mail addresses Bar code address lookup
Use common mail services including fax , air express, postal services
Fill out shipping forms and/or enter electronically in shipping terminal per the job ticket
Perform finishing work on documents to be mailed, such as folding and insertion
Perform electronic mail distribution (open, mail prep, scan and distribute)
Perform fulfillment functions, such as assembly, packaging, shipping and tracking of kitted materials
Follow mailroom security procedures
Barcode tracking or face scanning incoming mail and packages
Perform logging, transmission, receipt and timely distribution of faxes
Shipping and receiving using automated system to track and manage activity
Monitor/order/replenish supplies inventory, mail and distribution activities
Send and receive e-mail messages
Arrange alternative courier or shipping services to meet customer requirements
Fully operate, clean and maintain all shipping and mail equipment
Contact service on mail and shipping equipment if need occurs
Determine output packaging per packaging standards (e.g. process for books, tabs, etc.)
Driving (if required)
Utilize mail equipment per training ; for example: -- Finishing equipment -- Inserters -- Postage meters -- Envelope printers -- Scales -- Pitney Bowes Mail Management systems -- FedEx shipping systems

SKILLS: 
Able to lift and move up to 50 pounds
Able to demonstrate ability to read, write and follow
English instructions
Able to demonstrate PC / Internet Skills Basic -- Open applications -- Create and find file folders -- Find, open, rename files using Windows Explorer (or equivalent) -- Delete and recover files -- Open and send e-mails (create mail, add, save attachments) -- Manage email (create folders, change user options) -- Basic internet navigation (search; navigate to websites; navigate within website)
 Introductory knowledge of MS Word or equivalent (open saved files, create basic text documents, print and save documents) -- Introductory knowledge of MS Excel or equivalent (open saved workbooks, data entry, basic data and column/row formatting, print and save workbooks)
Able to demonstrate customer service and communication skills
Able to demonstrate ability to manage multiple tasks
Able to demonstrate ability to perform duties with minimal supervision
Able to demonstrate ability to perform Data entry 

EXPERIENCE: 
Experienced delivering services in a client environment 

EDUCATION: Minimum: High School diploma or equivalency 
 
Job Number: 1710076378
Job Location: Pittsburgh, PA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NL3AAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3 - Electrical

Description:
Manufacturing Planner 3 & 4

Location: Everett, WA
Duration: 9 months

Skill Code: 67B-Electrical/Electronics

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-19955
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/26/18
Input Date: 01/19/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Manufacturing Planner III & IV - Electrical/Electronics - Everett, WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA for Manufacturing Planners with Electrical/Electronics experience.

Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Scheduler

Description:
Several experienced Master Schedulers needed for long term contract assignments in El Segundo, CA.

This position is for a Principle Planner / Scheduler development of an Integrated Master Schedule (IMS) based on requirements provided by the customer as part of a Request For Proposal (RFP); development of a DID and DCMA compliant, executable IMS after contract award; resource loading the IMS prior to an Integrated Baseline Review (IBR) that demonstrates thorough cost and schedule integration; and detail planning and maintenance throughout the program’s lifecycle that incorporates contractual and programmatic changes into the IMS in order to maintain realistic, current contract schedule baselines. In addition the position will require detailed analysis of the IMS and supporting documents to ensure quality, completeness and compliance. The weekly and monthly business rhythms will require communication (electronically and verbally) of schedule status including but not limited to, results of critical path analysis, schedule risk analysis (SRA), schedule variance analysis and the results of ‘what if’ exercises to the Program Manager, the customer and potentially to senior management.

Other duties will include: assisting with the development and maintenance of the Program Master Phasing Schedule and Integrated Master Plan (IMP)

• Ideal candidate will have minimum of 8 years of professional work experience, which includes at least 3 years of scheduling experience in an engineering/manufacturing environment (preferably aerospace). The candidate must be thoroughly familiar with the tenants of scheduling in an Earned Value Management environment.


Required Skills:

• Minimum 8 years of professional experience in Accounting, Finance, Program Management or Program Planning & Scheduling
• Minimum 3 years of scheduling experience in an engineering/manufacturing environment (preferably aerospace)
• Demonstrated experience in using MS Office suite products (MS Word, Excel, PowerPoint, etc.)
• Demonstrated Microsoft Project experience (or similar project scheduling software)
• The ability to interface and influence at all levels of an organization
• Strong communication skills, both verbal and written
• The ability to thrive in a deadline-oriented environment
• Demonstrated knowledge of the Earned Value Management System (EVMS) or similar business process
• Demonstrated knowledge and experience in assisting Integrated Product Teams (IPTs) in planning, scheduling and cost estimating
 
Job Number: 40362
Job Location: El Segundo, CA
Rate: GREAT $$$
Per Diem: yes
Overtime: posseible
Duration: 12 mos
Start Date: asap
Input Date: 01/11/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6333
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:
The Mechanical Engineer will produce moderately-complex technical designs and some analysis mechanical / structural modifications to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating stress analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The candidate shall possess and apply knowledge and technical expertise to the design, analysis, and maintenance of facility related mechanical and electromechanical products and systems. The successful candidate should have at least 10 years of relevant design and analysis experience in building and/or modifying large industrial facility mechanical systems. The desired experience shall be in the following areas; water piping and plumbing, mechanical hydraulic systems, fire protection systems and light structural design. A smaller percentage of the work will involve the design and analysis of facility HVAC systems and mechanical components of support equipment and facility platform systems.

Skills:
This position requires knowledge of predominantly mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. He/she shall have analysis experience using STAAD and/or RISA, Femap – NX Nastran and be able to create stress calculations by hand with Excel or MathCAD. Other 3D modeling and design experience in Autodesk Inventor, Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
Bachelors degree from an accredited college in Mechanical Engineering is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8430
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Metrology Technician - CA - C

Description:
Chipton-Ross is seeking a Metrology Technician for an opening in El Segundo, CA.

RESPONSIBILITIES:
Checks, calibrates and repairs a wide variety of precision electrical, electronic and electromechanical measuring and test equipment to assure compliance with engineering, customer and Company requirements.
1. Performs electronic and mechanical tests, following established calibration procedures, to determine the overall condition of precision electrical, electronic, and electromechanical measuring and test equipment. Ascertains correct procedure, sets up and operates standard and specialized direct reading test instruments, equipment and checking devices.
2. Calibrates, modifies, adjusts and, otherwise assures the accuracy of all precision measuring and test instruments to manufacturer's specifications. Disassembles, troubleshoots, isolates causes of malfunction and performs repairs by replacing worn, damaged or defective parts. Works from schematics, technical manuals, Company procedures, parts catalogs, manufacturer's specifications, engineering blueprints and written detailed technical instructions.
3. Performs pre-established calibration and maintenance work as scheduled for precision measuring and test equipment and completes all maintenance records pertaining to this equipment.
4. Performs other job related duties as directed by the Metrology Lab Manager such as conducting evaluation tests on new instruments, preparing calibration reports, requisitioning materials and parts needed for repair, conducting standard laboratory tests to determine the performance and reliability of the instruments after repair or calibration, and repairing and servicing miscellaneous electrical, electronic and electro-mechanical Company equipment to assure proper operation.
5. Familiar with uncertainty calculations via Met/Cal programming.

REQUIRED EXPERIENCE:
Min of five years of progressively more responsible experience in field or a related field, including familiarity, knowledge and operation under ISO-17025, ANSI/NCSL Z540.1 or ANSI/NCSL Z540.3 and Uncertainty calculations is a plus.

EDUCATION:
Accredited Associate's Degree.

WORK HOURS:
FULL TIME/FIRST SHIFT

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166453
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

NDT Inspector

Description:
Our client in Greeensboro, NC is actively seeking an experienced NDT Level II Inspector to join the Quality Control team.  Using established methods of inspection, the inspector will be responsible for determining product compliance, developing complex calculations and devising set-ups to perform in-process, first article, and final inspection per operational requirements. 

Essential Functions
  • Set-up and calibration of equipment.
  • Identify NDI problems and recommend solutions.
  • Interpret and evaluate results with respect to applicable codes, standards, and specifications.
  • Organize and report the results of nondestructive tests.
  • Exercise assigned responsibility for on-the-job training and guidance of Level 1 and trainee personnel.
  • Evaluate test procedures and product compliance to internal and industry specifications.
  • Conduct tests per written and verbal instruction as required.
  • Understand and interpret engineering drawings, specifications, and work procedures.
  • Perform conformity inspection of components, major assemblies, sub-assemblies, and parts during manufacturing, modifications, and installations to determine conformance to applicable drawings, specifications, quality standards, and manufacturing plans.
  • Identify, document, and track discrepancies using SAP.
  • Use a variety of inspection aids, and precision testing and measurement equipment such as ohmmeters, output meters, flashlights and mirrors, calipers, feeler gauges, scales, ball gauges, micrometers, etc as necessary to determine proper adjustment and operation of aircraft systems.
  • Accurately enter electronic data related to aircraft production, completion, and installation operations.
  • Focus on manufacturing demands by multi-tasking and meeting schedule deadlines
  • Seek ways to improve / streamline inspection methods and communication channels
  • Cooperative behavior and a helpful attitude.
  • Comply with Honda’s values and ethical standards and all applicable policies.
  • Prepares necessary aircraft related FAA, company, and customer documents.
  • Support other activities as required by company requirements and management direction.
  • Ability to work any shift and weekends as required.


Qualifications
  • Excellent communication skills, both verbal and written.
  • Proficient using Microsoft Office software, SAP and TeamCenter preferred.

 
Education, Training, and Skills 

  • High school diploma required, Associate’s degree or higher preferred.
  • Current Ultrasonic (UT) certification required.
  • Current Eddy Current (EC) preferred.
  • Current Liquid Penetrant (PT) preferred.


  

 

 
Job Number: 1710079274
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023bD8AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical Designer / Engineer

Description:
Design and develop vehicle 3D wire harnesses, clipping and brackets to mount components and systems using Siemens NX CAD..
Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
Create and maintain detailed part and assembly drawings.
Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS:

Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
Siemens NX CAD experience required
Create 3D wire harnesses, clipping and brackets to mount electrical components.
Previous electrical and electronics packaging experience preferred.
A general knowledge of automotive systems preferred.
Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 4508
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 01/12/2018
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Systems Engineer

Description:
The Systems Development Center within Raytheon Space and Airborne Systems has a need for a Principal Systems Design and Development Engineer to support Electronic Warfare program needs in Goleta, CA. We are looking for a Systems Engineer with experience in Electronic Attack (EA), Electronic Surveillance (ES) and the related systems engineering design and analysis performing trade studies, performance analysis, requirements flow down, requirements management, developing test strategy, writing test plans, reviewing test data and preparing for design reviews/presentations to customers.

The candidate will support the development and design of system and software architectures, implement Open Architectures, perform system analysis, design, requirements flow down and specification, interface design, concept and configuration refinement and effectiveness analysis for a broad range of EW applications. The candidate will also support programs for requirements definition through sell-off to customers and users at government run facilities.

The candidate is responsible for creation and maintenance of the systems model with a familiarity of Architecture Frameworks and SysML. The candidate will guide and direct other functions through architectural decisions and trades. The candidate will provide architectural input to all decisions impacting product integrity, system performance, and system functionality.

Candidate may support activities such as characterization of system performance, planning and coordination of system/software deliveries, integration and testing of initial and updated system builds and support to
installation of Raytheon products.

Required Skills:

· Minimum 8 years of experience in one or more areas of the system development lifecycle, from system requirements and system design through integration and test utilizing the Integrated Product Development System (IPDS)

· Working Electronic Warfare knowledge and experience with understanding of threat systems, mission analysis, and Concept of Operations

· Experience with Software Architecture, Algorithm development, and interface design over various communication protocols (e.g. PCIe, GbE, RS-432, etc)

· Experience in proposal development (contributor role sufficient) supporting technical volume generation along with generation of cost estimate for detail tasking

· Experience with team leadership of software and/or firmware centric team members driving design, development and verification of system capabilities meeting performance goals.

· Experience with generating models supporting real-time and/or embedded software development

· Requirement generation and allocation experience utilizing requirements management applications (e.g. DOORS, SLATE)

· Experience performing system analysis of complex data processing systems & proven performance analysis skills, fault isolation investigation skills in characterizing, monitoring & tuning data processing systems

· Excellent communication skills supporting interface with internal and external customers along with presenting performance results and status to peers and senior management
 
Job Number: 7902254
Job Location: Goleta, CA
Rate: DOE
Duration: 6-12 Months
Start Date: ASAP
Input Date: 01/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Product Review Engineer 3 - Electrical/Electronic

Description:
** Must be able to obtain a Secret Clearance **

Applies knowledge of Company design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Company standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: 373035
Job Location: Heath, OH
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 02/24/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Product Review Engineer 3 - OH - O/M

Description:
Chipton-Ross is seeking a Product Review Engineer 3 located in Heath, OH

RESPONSIBILITIES:
Applies knowledge of Client design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Client standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
7 AM - 3:30 PM

Shift may be 1st, 2nd or 3rd

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Resumes must be up-to-date

 
Job Number: 167217
Job Location: Heath, OH
Rate: $DOE
Duration: 6 MONTHS
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Operator 2

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Production Operator 2
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-4796

This position will include working inside and outside of military vehicles making modifications, running cables, using all types of both hand and power tools.

Responsibilities:
• Performs project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Follows methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• May be involved in packing tasks; may count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
• May conduct manufacturing inspections on processing line to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
• Contacts are primarily within immediate work unit and direct supervisor
• Maintains a clean and orderly work area
• Work is closely supervised, following detailed instructions, and periodic checking on work performance

Qualifications:
• Able to work in tight spaces, work from elevated platforms, and lift 25lbs.
• Able to learn job skills and become familiar with company policies to complete assignments
• Able to use hand/torque tools, soldering irons, other light industrial tools
• General communication and interpersonal skills
• Able to set up basic equipment and process hardware compliantly to specifications
• General knowledge of measuring equipment and math, communication and interpersonal skills, and computer skills/literacy

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High School Diploma or equivalent is required

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/4796/production-operator-2/job?mode=view
 
Job Number: 2017-4796
Job Location: Scottsdale, AZ
Input Date: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Project Control Analyst IV

Description:


Chipton-Ross is seeking a Project Control Analyst IV for a contract position in Rancho Bernardo, CA.

RESPONSIBILITIES:
Under limited supervision, implements, develops and applies planning, tracking, and analysis procedures for reporting on projects of varying contract type, size, complexity, and level of risk.
Participates in preparation, review, production, sign-off and tracking of contract deliverables.
Establishes and maintains cost/schedule baseline, develops Work Breakdown Structures (WBS) and related dictionaries, performs Estimates At Completion.
Implements and develops Earned Value Methodologies, performs related variance analysis and works with Project Managers and Senior Technical personnel to ensure uniform application of company procedures.
Develops and implements reporting procedures to report project status and valuation of work in progress as well as tracking procedures for contract deliverables.
Participates in new business proposals as required to develop schedule, manpower, and cost estimates.
Provides input to cost and management volumes.

REQUIREMENTS:

**MUST have Earned Value Management (EVM) experience

Must have a strong background analyzing multiple contract types: Firm Fixed Price (FFP), Fixed Price Incentive (FPI), Fixed Price Level of Effort (FPLOE), Time and Materials (T&M), Cost Plus Award Fee (CPAF), Cost Plus Fixed Fee (CPFF), and hybrid contracts. Requires an understanding of GAAP and FAR. Must be an effective communicator and able to represent the company independently on routine matters. Must be able to write, interpret and explain complex issues. Must be proficient with the following electronic software: word processing, spreadsheet, e-mail, and project management. Must be able to work extended hours and travel as required.

EDUCATION:
Typically requires education/formal training equivalent to the completion of a bachelor's degree in business administration or a related discipline, along with eight or more years of related experience.

MISCELLANEOUS:
1st shift, 5/40 schedule
 
Job Number: 166432
Job Location: Rancho Bernardo, CA
Rate: $DOE
Duration: 6 months CTH
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager II - Linux, Embedded C/C++

Description:
The Project Manager II will lead a cross-functional team responsible for managing Engineering activities required to fulfill commitments for an airline customer program.

The role requires excellent communication skills, ability to see the “big picture”, and ability to direct efforts appropriately on prioritized tasks.

Responsibilities include the following:
• Participate in the development and analysis of customer requirements.
• Identify all customer deliverables which may include production items (mechanical, electronic and/or electro-mechanical assemblies), software, media, customer racks, documentation and systems.
• Identify internal deliverables which may include plans, schedules and other documents, prototypes, test equipment, software, test racks and more.
• Identify and secure resources required for all project tasks.
• Lead the team to establish a comprehensive, end-to-end project plan and schedule to which the team has “buy-in”.
• Maintain and manage to the project plan and schedule.
• Lead the team to coordinate design, development, documentation, integration, test and certification activities across functional groups to meet committed deliverables to customer schedule, cost and technical requirements.
• Coordinate the procurement and selection of parts, materials and components with suppliers.
• Manage third party development.
• Coordinate pre-production and design transfer to manufacturing.
• Coordinate initial customer deliveries.
• Apply standard techniques, procedures, processes and criteria to engineering assignments.
• Conduct well planned, effective meetings which drive actions.
• Continual process improvement.

Qualifications Required:
• B.S. degree or higher in Computer Science, Computer Engineering or a related field of study.
• Minimum 15 years of software and/or hardware engineering development experience (LINUX & EMBEDDED C / C++).
• At least 10 years of experience in project management of software, electronics, mechanics, and/or circuit design Must have excellent communication skills MS Office 2003 & MS Project.
 
Job Number: 361528
Job Location: Calabasas, CA
Rate: Open
Per Diem: None
Duration: Permanent
Input Date: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Cert Spec II

Description:
UNIQUE SKILLS
Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program. Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process. Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule. Prepares reports, creates test tracking using data from various company systems. Experience working with SAP, Solumina, SmarTeam and MS Excel desired. Demonstrated experience with data validations, data integrity and regulatory reporting desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

POSITION PURPOSE
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or client ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

ADDITIONAL FUNCTIONS
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

OTHER REQUIREMENTS
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelor’s degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 18-804-113021
Job Location: Southeast
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Quality Coordinator

Description:
PDS Tech Inc. is seeking Quality Coordinator located in Salt Lake,UT. 

Description:

• Manage the transfer and storage of hard copy and electronic documents
• Review documents for compliance to established procedures
• Manage controlled documents and issue documents as required
• Update other applicable databases when required
• Assist in the documentation of training activities and management of training records
• Documentation System Super User
• Provide training and help individuals comply with use of documentation control system

 
• Associates Degree a plus, but NOT required


• Experience providing Administrative Support
• Attention to Detail
• Computer savvy
• Proficient in Microsoft Office: Microsoft Word and Microsoft Excel. PowerPoint a plus

 
Job Number: 1710078754
Job Location: Salt Lake City, UT
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Ub7AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Desired Knowledge:
•Knowledge of Software Defined Radios
•Embedded Real Time Software experience
•Familiarity with GPU programming concepts and signal processing
•Familiarity with satellite radio concepts, architecture, and terminology
•Familiarity with Electronic Warfare systems, operations, and concepts
•Familiarity with signal intelligence systems
•DOORS experience
•CMMI Level III experience
•NSA Certification experience
•DO-178B Certification experience
 
Job Number: 41255
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Required Knowledge:
•Demonstrates strong working knowledge of C#/.NET
•Experience in SQL, WCF, LINQ, WinForms, and WPF.
•Advanced understanding of OOA/OOD Software Solutions
•Good working knowledge of Microsoft Visual Studio
•Strong Understanding of Windows Operating Systems
•GUI software design and development experience
Desired Knowledge:
•Knowledge of GIS mapping systems.
•Practical Knowledge of UML design tools
•Familiarity with Electronic Warfare systems, operations, and concepts
•Familiarity with signal intelligence systems
•CMMI Level III experience
•Windows 10 application development knowledge
•VM technology familiarity
 
Job Number: 41256
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Software Engineer - Avionics

Description:
PDS Tech, Inc. is seeking Senior level Software Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
This role is focused on the development of avionics software for the US DoD rotary-wing and/or fixed wing market.
 
 In this role you will:
  • Be part of a multifunctional team comprised of systems engineers and software engineers.
  • Develop in a collaborative team environment which often includes team members from diverse geographic and cultural backgrounds.
  • The tasks may include: requirements analysis and capture, system/sub-system design, software requirements definition, software/hardware integration, test case/procedure development using Python, performing/running test procedures for test events, and software implementation using ADA or model based development tools such as MATLAB/Simulink.

Our global development team is split between the USA and other countries, requiring odd hours on occasion.
Customers are both foreign and domestic and include all branches of the armed services as well as civilian entities.
  • 4 year degree in an applicable STEM field
  • Software development experience using C, C++, or C#
  • Proficient in an assembly language
  • Experience with MATLAB/Simulink, Python, ADA, and C/C++ is a plus.
  • Ability to train and mentor entry level engineers
  • Strong verbal and written communication skills
  • Strong critical thinking and problem solving skills.
  • Ability to obtain a Security Clearance. US Citizenship is required.
     

 
Job Number: 1610053780
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CBGDAA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Systems Engineer II

Description:
SADID is seeking engineering professionals to be part of the System Engineering teams that design and develop world-class Surveillance Radar programs in our Marlboro, Woburn and Tewksbury MA locations. System Engineers in this position will be responsible for supporting radar system concept development, architectural design, requirements generation and flow down, modeling and simulation, systems analysis, integration, test and evaluation. The successful candidate will be expected to perform system engineering trades studies to determine solutions to technical issues, and work within multi-discipline development teams across multiple locations to coordinate the development and integration of products, support customer intimacy for areas of responsibility.

Required Skills:
• Minimum of 8 years professional radar system engineering experience to include knowledge of Electronic Attack (EA) / Electronic Protect (EP) techniques
• Knowledge of Digital RF Memory capabilities and counters
• Experience in successfully developing and documenting EP capabilities
• Ability to model and simulate EA/EP techniques in Matlab or similar tools
• Must be a U.S. Citizen with Active (or active within past 24 months) DoD Secret Clearance
Desired Skills: • System Architecture Design • Familiar with commercial communications waveforms and corresponding radar counter measures to communications interference • Ability to implement and demonstrate EP in software and/or firmware • Fusion between Signal Intelligence and EA/EP Techniques • Experience with systems integration, simulation and qualification testing • Experience with RF Systems Engineering including knowledge of RF performance analysis • Familiarity with the Navy, Air Force and Army Customers • Excellent documentation and communication skills, both written and oral • Understanding of Earned Value Management Systems • Experienced with completing designs on schedule and within budget • Have a record of Patents, Publications, and/or Technical Presentations to industry • Active Top Secret/SCI Clearance or proven eligibility Keywords: Electronic Protection, Electronic Attack, Electronic Counter-Countermeasures, Electronic Warfare, Noise Jamming, Deceptive Jamming, Angle Deception, False Targets, Digital Radio Frequency Memory (DRFM)
 
Job Number: 7957315
Job Location: Marlborough, MA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Systems Engineer II - Active Secret Clearance MA

Description:
Sr Systems Engineer II - Clearance (7957315)

12 month(s)

Marlborough MA United States


SADID is seeking engineering professionals to be part of the System Engineering teams that design and develop world-class Surveillance Radar programs in our Marlboro, Woburn and Tewksbury MA locations. System Engineers in this position will be responsible for supporting radar system concept development, architectural design, requirements generation and flow down, modeling and simulation, systems analysis, integration, test and evaluation. The successful candidate will be expected to perform system engineering trades studies to determine solutions to technical issues, and work within multi-discipline development teams across multiple locations to coordinate the development and integration of products, support customer intimacy for areas of responsibility.

Required Skills:
• Minimum of 8 years professional radar system engineering experience to include knowledge of Electronic Attack (EA) / Electronic Protect (EP) techniques
• Knowledge of Digital RF Memory capabilities and counters
• Experience in successfully developing and documenting EP capabilities
• Ability to model and simulate EA/EP techniques in Matlab or similar tools
• Must be a U.S. Citizen with Active (or active within past 24 months) DoD Secret Clearance
Desired Skills: • System Architecture Design • Familiar with commercial communications waveforms and corresponding radar counter measures to communications interference • Ability to implement and demonstrate EP in software and/or firmware • Fusion between Signal Intelligence and EA/EP Techniques • Experience with systems integration, simulation and qualification testing • Experience with RF Systems Engineering including knowledge of RF performance analysis • Familiarity with the Navy, Air Force and Army Customers • Excellent documentation and communication skills, both written and oral • Understanding of Earned Value Management Systems • Experienced with completing designs on schedule and within budget • Have a record of Patents, Publications, and/or Technical Presentations to industry • Active Top Secret/SCI Clearance or proven eligibility Keywords: Electronic Protection, Electronic Attack, Electronic Counter-Countermeasures, Electronic Warfare, Noise Jamming, Deceptive Jamming, Angle Deception, False Targets, Digital Radio Frequency Memory (DRFM)

Requires Active secret
 
Job Number: MB-7957315
Job Location: Marlborough, MA
Rate: open rate
Duration: 12 month contract
Input Date: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engineering or a similar technical discipline is a plus
Type of employment: Full time salaried position

Location: Chicago, IL
 
Job Number: 361925
Job Location: Chicago, IL
Rate: $125k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Sys Integratn/Test Eng Level 1 - NY - C

Description:
Chipton-Ross is seeking a Sys Integratn/Test Eng Level 1 for an opening in Owego, NY.

Designs, develops, and implements testing methods and equipment. Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices. Provides test area with parameters for sample testing and specifies tests to be performed. Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements. Responsible for testing all customer samples and for special tests that cannot be performed in the test area.

RESPONSIBILITIES:
This requisition is for a Senior Level Test Engineer. This position requires knowledge and experience working with digital and analog electronic circuits, automated test equipment, and software in a manufacturing environment. The individual must have the necessary skills to develop test procedures and methodologies for both digital and analog hardware utilizing Special Test Equipment (STE). The candidate will be responsible for supporting development hardware testing, leading the integration of development hardware into a production test environment, and developing a sustainment plan to maintain testability through a product's life cycle. Throughout the life of a product the applicant will be engaged in creating and analyzing Program Trouble Reports (PTRs) and driving appropriate software/hardware updates to optimize Product Test performance. The candidate will be responsible for developing test plans, and executing those plans against the corresponding test procedures. The applicant will be accountable for the development, release, and maintenance of test procedures. Other responsibilities include STE certification and calibration. Personal characteristics must include dependability, flexibility, adaptability, a self-starter requiring minimal direct supervision, the ability to work both individually and as part of a team, as well as being able to interact and work well with LM employees and internal customers.

REQUIRED EXPERIENCE:
Basic qualifications for this position include a working knowledge of analog and digital electronic circuitry, basic oscilloscope knowledge, and the ability to perform Root Cause Analysis from the Unit Under Test (UUT) to the Circuit Card Assembly (CCA) and down to the component level. Applicants must be able to comprehend the Test System and be able to with differentiate between hardware and software issues. Candidates must be proficient in writing Basis of Estimates (BOEs) with proper historical justification. Adherence to Quality Procedures within the Product Test Organization is a must. The applicant must have good communication skills with the ability to successfully lead a team. Must also accept the schedule which on occasion include off-shift (afternoon, nights, weekends) scheduling to meet business needs.


PREFERRED EXPERIENCE:
Desired Skills: The candidate must possess a working knowledge of Windows-based PCs including but not limited to the following software packages: SAP, EPDM, Microsoft Office Suite, LabView, Operator Interface, Lauterbach, and JIRA. The applicant must retain the ability to troubleshoot circuit card assemblies down to the component level using special test equipment, digital multi-meters, oscilloscopes, and other evaluation tools. The applicant will be required to produce well-written technical documents such as test procedures, basis of estimates, and proposals. Basic knowledge of fiber optic handling and evaluation is a plus.

WORK HOURS:
This is primarily a first shift position. However, any candidate submitted should be prepared, on occasion and driven by business needs, plan for working an off shift or alternate schedule which could contain 2nd or 3rd shift hours and/or weekend work.

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 167771
Job Location: Owego, NY
Rate: Up to $40.00 DOE
Duration: 12 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Seeking engineering professionals to be part of the System Engineering teams that design and develop world-class Surveillance Radar programs. System Engineers in this position will be responsible for supporting radar system concept development, architectural design, requirements generation and flow down, modeling and simulation, systems analysis, integration, test and evaluation. The successful candidate will be expected to perform system engineering trades studies to determine solutions to technical issues, and work within multi-discipline development teams across multiple locations to coordinate the development and integration of products, support customer intimacy for areas of responsibility.

Required Skills:
• Minimum of 8 years professional radar system engineering experience to include knowledge of Electronic Attack (EA) / Electronic Protect (EP) techniques
• Knowledge of Digital RF Memory capabilities and counters
• Experience in successfully developing and documenting EP capabilities
• Ability to model and simulate EA/EP techniques in Matlab or similar tools

Desired Skills:
• System Architecture Design
• Familiar with commercial communications waveforms and corresponding radar counter measures to communications interference
• Ability to implement and demonstrate EP in software and/or firmware
• Fusion between Signal Intelligence and EA/EP Techniques
• Experience with systems integration, simulation and qualification testing
• Experience with RF Systems Engineering including knowledge of RF performance analysis • Familiarity with the Navy, Air Force and Army Customers
• Excellent documentation and communication skills, both written and oral
• Understanding of Earned Value Management Systems
• Experienced with completing designs on schedule and within budget
• Have a record of Patents, Publications, and/or Technical Presentations to industry
• Proven eligibility Keywords: Electronic Protection, Electronic Attack, Electronic Counter-Countermeasures, Electronic Warfare, Noise Jamming, Deceptive Jamming, Angle Deception, False Targets, Digital Radio Frequency Memory (DRFM)
 
Job Number: 40333
Job Location: Marlborough, MA
Duration: 12 months
Start Date: ASAP
Input Date: 01/10/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Systems Engineer - Aerospace

Description:
PDS Tech, Inc. is seeking Senior level Systems Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
This role is focused on systems engineering for the Fixed Wing Platform Systems; Legacy Tankers Systems group.
 
 In this role you will:
  • Provide expertise in the system analysis, requirements capture, and testing for the multiple KC-135 and KC-10 programs.
  • Contribute to the technical aspects of a project during development and testing.
  • Provide effective and intelligent oral and written interaction with customer and project team.

  • Strong working knowledge of software development process
  • Requirements development experience
  • Experience with avionics System Integration Laboratory testing
  • Working knowledge of avionics and navigation principles & Flight Management Systems
  • Excellent analysis and problem solving skills.
  • Knowledge and experience with FMS functionality.
  •  Ability to obtain a Security Clearance. US Citizenship is required.


Preferred skills:
 
  • Familiarity with development tools such as DOORs, Clearquest, Matlab JAMA, JIRA
  • Familiarity with Python or automated test script development experience
  • Familiarity with Microsoft products (Word, Excel, Powerpoint, Project)

 
Job Number: 1610053781
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CBHQAA4&URLSource=cjhunter

Systems Engineer - Communications

Description:
Our client, a pioneer in the design, production and support of innovative avionics, electronics, communications, and simulation & training solutions in the aerospace and defense industries, has new senior systems engineering positions available through PDS Tech as part of the Government Systems Communication Products Organization. You will be involved in the development of the next generation of Communication Products covering all spectrum bands within multiple airborne and ground platforms. You will work with engineering management, systems, hardware and software engineering technical leads/developers, production, and subcontractors to provide support for both Domestic and International customers.

Key responsibilities could include: system and subsystem requirements definition and validation, integration and verification testing; or supporting technical collaboration among systems, hardware and software design functions; resolution of technical problems that cross functional domain areas of hardware/software and development of systems related documentation. 
 
Candidates must have the following skills: 
- A demonstrated understanding of the systems engineering development process.

- Knowledge and experience in developing system requirements and decomposing them to functional disciplines for RF communication products. 
- Understanding of system validation and verification processes for technical product development with the ability to generate test descriptions and perform systems evaluation and testing of product systems. 

-Must possess or be eligible for obtaining and maintaining a U.S. DOD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements. 
-Bachelor's Degree in applicable engineering or science field and six years of related experience. 

Preferred experience/skills: 
-Knowledge of communications engineering fundamentals including general radio transceiver architectures/designs, basic radio functional component blocks, performance specifications and test methodologies 
-A solid foundation of system, software, and hardware development processes 
-Familiarity with communication systems equipment including radio controls, radios, data modems, antenna couplers, power amplifiers and RF filters 
-Experience with System Integration and Testing of Software Defined Radios or complex 
embedded products 
-Analog, digital, and RF troubleshooting skills 
-Strong oral and written communication skills 
-Familiarity with military concepts of operations 
-Domain knowledge of commercial and/or military net-centric wireless communications waveforms/protocols 
-Acquainted with radio performance standards (military, commercial, FAA) 
-Understanding of manufacturing build, test, quality and customer acceptance review processes 
 
 
Job Number: 1610052761
Job Location: Cedar Rapids, IA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001t5xBAAQ&URLSource=cjhunter

Technical Publications Dev Support TS/SSBI, Richardson TX 75082

Description:
PDS Tech has a need for a Technical Publications Development Support Contractor for a client in Richardson TX 75082
12 month contract
Top Secret security clearance with a single scope background investigation (SSBI) is required.


Support in the development and delivery of AAS training device technical publications. Data includes paper, electronic, and interactive forms of media used during product operation and maintenance (e.g., operational information and checklists, maintenance information, illustrated parts breakdowns, wiring diagrams and flow schematics, field modification instructions, service bulletins, catalogs, configuration specifications, etc.).

Task descriptions include the following:
  • Organizes, develops, writes and edits publications and related data to support product requirements; incorporates engineering and technical content into publications as required: maintains document configuration control.
  • Gathers and analyzes customer requirements, reviews and coordinates specifications, and researches technical information used to develop technical documentation.
  • Uses software to create multi-part documents that can be converted into various electronic formats.
  • Tailors document language and format to needs of audience.
  • Determines graphics requirements and creates/modifies simple illustrations.
  • Participates in reviews to ensure accuracy of technical information.
  • Maintains data files and archives.

Experience with the use of Microsoft Office Tools including Word, PowerPoint, Visio, and Excel. In addition, experience with AutoCAD is desired.
Top Secret security clearance with a single scope background investigation (SSBI) is required.
 
 
Job Number: 1710063299
Job Location: Richardson, TX
Duration: 11 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GAYmAAO&URLSource=cjhunter

Temp Assembler

Description:
PDS is seeking an Assembler for an open position in Everett, WA.
In your role, you will r
eportto the Manufacturing Supervisor under limited supervision, the Temporary Assembler performs electronic, electromechanical or mechanical production sub-assembly and assembly operations to build units of moderate complexity.
 
JOB RESPONSIBILITIES
  • Follow detailed assembly instructions, processes and procedures.
  • Assemble assigned product parts on assembly line in accordance with production guidelines.
  • Utilize small hand tools such as, wire , crimpers, wrenches, screwdrivers, pliers, and hammers.
  • Perform spot checks of product to ensure adherence to approved quality standards.
  • Wear personal protective equipment in accordance with training guidelines.
  • Comply with policies, guidelines and regulatory requirements per the B/E Aerospace Quality System.
  • Report problems with quality, processes, equipment and materials to Production Supervisor.
  • Maintain an organized work area.
  • Adhere to established company policies and procedures with special attention to safety requirements.
  •  
    MINIMUM REQUIREMENTS
  • High school diploma or general education degree (GED)
  • One to three years related experience and/or training; or equivalent combination of education and experience.
  • Ability to review and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  • While performing job duties, the employee is regularly required to use hands to finger, handle or feel.
  • Frequently is required to stand, sit, and reach with hands and arms.
  • Occasionally required to walk, stoop, kneel, crouch, or crawl; and talk or hear.
  • Must be able to occasionally lift and/or move up to 30 pounds.
  • Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
  •  
    PREFERRED QUALIFICATIONS
  • Experience in a highly regulated industry, especially aerospace.


 
Job Number: 1810079559
Job Location: Everett, WA
Duration: 8 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023cx5AAA&URLSource=cjhunter

Test Engineer

Description:
Chipton-Ross is seeking a Test Engineer for a contract-to-hire opening in Rancho Bernardo, CA.

RESPONSIBILITIES:
An exciting opportunity for an Engineer to assist the test engineering staff in planning and executing testing of various ALRE (Advanced Launching and Recovery Equipment) products at various site locations. The individual filing for the Test Support position will interact with technical staff and report to senior test engineers and test managers. The tests that the individual will be required to support range from production and factory acceptance tests, system and component level requirements verification tests combined with operational tests, lifecycle tests, environmental and electromagnetic tests.

Applies technical knowledge to develop concepts and plans for test systems and programs.
Applies technical knowledge to analyze, investigate and resolve Test engineering problems related to pulse power systems.
Translate system or product requirements into verification tests and instructions.
Participate in establishing design concepts, criteria and engineering efforts for testing.
Create and update Test procedures and assist sub-contractors in design and execution of various tests on pulse power system electronics.
Lead efforts to install and set-up instrumentation in San Diego and at remote sites.
Conduct testing and verification as directed by the Test Director / Manager.
Take a lead role when needed to execute and direct system and subsystem test operations.
Provide technical direction to staff engineers, technicians, and subcontractors.
Troubleshoot test systems, equipment and test procedures as needed.
Analyze test data and prepare collected data for creation of test reports.
Maintains the strict confidentiality of sensitive information.
Responsible for adhering to all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
Responsible for ensuring work is accomplished in a safe manner in accordance with established operating procedures and practices. Expected to work in a safe manner in accordance with established operating procedures and practices.
Some travel to the test sites located in, but not limited to, New Jersey, Southern California, Alabama, and Mississippi is also required.

REQUIREMENTS:
Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.

Working knowledge in the operation and testing of High Power Electrical Equipment and pulse power systems.
Working knowledge of electrical subsystem and system level testing and some experience with board level tests.
Hands on experience testing power electronic equipment.
Experience in writing technical documents such as test procedures and test reports.
Experience in communicating technical information to peers and to customers.
Demonstrated expertise in leading or guiding a team independently.
Working knowledge of Power Electronics in the area of power conditioning and storage and experience conducting tests in a development and production environment.
Have a desire to work in a fast-paced testing environment.
Demonstrated test engineering expertise with DoD programs is desired.

HARD REQ'S:
Need a working knowledge in the operation and testing of High Power Electrical Equipment and pulse power systems

EDUCATION:
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education.

MISCELLANEOUS:
1st shift, 5/40 schedule
 
Job Number: 167525
Job Location: Rancho Bernardo, CA
Rate: $DOE
Duration: 6 mo CTH
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Test Engineer (Hands-on)

Description:
Test Engineer (Hands-on)

Location: Burbank, CA
Pay Rate: $28/hr - $33/hr
Duration: Temp to Hire
Shift: not specified

SUMMARY: Develops test procedures and coordinate efforts with other engineering departments to support flight development and qualification programs. Performs mechanical testing of individual components and assemblies to ensure conformance with established specifications.

ESSENTIAL FUNCTIONS: The duties are not limited to the following description:

1. Creates and coordinates overall test plans and assists in developing test procedures and reports which meet the customer’s program testing requirements.
2. Designs test fixtures and reconfigures test equipment in order to meet program goals.
3. Reads and interprets technical procedures and drawings to determine test objectives, set-up requirements, testing limits, and acceptance criteria.
4. Installs test fixtures and specimens to the test equipment.
5. Operates static and dynamic servo-hydraulic test machines and electro-dynamic shaker systems.
6. Completes paperwork associated with the test procedure, including filing test results either electronically or in a conventional filing system.
7. Reviews and analyzes test data to determine if it meets program requirements.
8. Recommends revisions to test method or work flow to optimize the process while maintaining test integrity in accordance with internal and external customer requirements.
9. Performs new technology research on state-of –the-art test systems and software to determine whether new equipment will provide the Company with a cost or technological advantage.
10. Provides test support and analyzes test fixtures, machines, and data to solve problems on test programs.
11. Performs routine cleaning and servo-hydraulic material test machines and electro-dynamic vibration shakers equipment maintenance. Troubleshoots and resolves issues with test equipment.
12. Prepares, generates and maintains Statistical Process Control (SPC) charts and data in order to monitor the production and testing processes.
13. All other duties as assigned.
14. Responsible for promoting and abiding by the HSE rules and policies.

PRIMARY TOOLS OR EQUIPMENT: Able to set-up and operate servo-hydraulic material test machines and electro-dynamic vibration shakers with both manual and computer controllers. Able to set-up and operate temperature and vacuum environmental chambers. Able to set-up and operate digital and analog meters and displays, spectrum analyzers, plotters, recorders, dial indicators, calculators, various manual and pneumatic hand tools and other equipment and tools typically found in the test lab. Able to use measurement tools such as calipers, dial indicators, micrometers, weigh scales, and machinist scales. Ability to use shop hand tools, pneumatic tools, lifting devices, and cranes.
Use of typical office equipment such as telephones, computers (Microsoft Excel and Word), copiers, printers, fax machines, e-mail, scanners, etc.

KNOWLEDGE AND SKILLS REQUIRED:

Education and/or Experience: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or Applied Mechanics. Two years test-related experience in the field of Aerospace or Applied Mechanics, one year basic electronics and one year in machine design, or equivalent experience.

Language Skills: Able to read and comprehend instructions, correspondence, and memos. Able to effectively communicate verbally and in writing information to customers, clients, and employees.

Problem Solving: Able to apply logic, segregating the facts, make a decision, and carry out task.

Computer Skills: Working knowledge of Windows and word processing, spreadsheets and databases. Proficient in MS Office (Word, PowerPoint, Excel, Outlook).

Other Teamwork or Skills: Ability to participate as a team member. Knowledge of industry best practice in Configuration Management practices. Have an understanding of software and machine maintenance. Exercise excellent organization, communication and interpersonal skills.

ABILITIES REQUIRED:

Physical Requirements: While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle or feel objects and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch and lift light to moderate weighing items. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance.
 
Job Number: 8475
Job Location: Burbank, CA
Rate: 28-33
Per Diem: Split Possible
Overtime: Possible
Duration: Temp to Hire
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Dallas, TX
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 14 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a DoD SECRET CLEARANCE**

Description
-Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE), establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion.
-Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills.

Skill/Experience/Education/MANDATORY:
-One of the following degrees: BSEE or BSEET or BSCE
-Agilent 3070 Series III Test Development experience: (4-5+ years' experience required)
-Boundary Scan programming: (4-5+ years' experience required)
-Fixture design: (4-5+ years' experience required)
-Microsoft Office applications: (1-3+ years' experience required)
-Strong writing and communication skills

Desired:
-Agilent device programming (Flash, EEPROM, CPLD): (1-3+ years' experience desired)
-JTAG Tech programming: (1-3+ years' experience desired)
-TestSight CAD translation: (1-3+ years' experience desired)
-CKT1175 programming: (1-3+ years' experience desired)
-Perl: (1-3+ years' experience desired)
 
Job Number: 8014
Job Location: Dallas, TX
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Test Equipment Fabrication Technician - CA

Description:
Chipton-Ross is seeking a Test Equipment Fabrication Technician for an opening in San Carlos, CA.

We currently have an opportunity for an experienced Test Equipment Fabrication Technician in the Test Equipment Engineering group at our San Carlos, California location.

In use on satellites, land-based devices, and airborne platforms that meet the critical needs of our commercial, government, and military customers, client ETI's products have a proven history of high reliability. Be a part of that heritage by putting your unique skills to work with us as we develop and manufacture some of the most advanced products to be found on - or above - the planet. If you've got what it takes to be client, we look forward to hearing from you.

client Communications Corporation is proud to be an Affirmative Action/Equal Opportunity Employer, and provides equal employment opportunity for all persons, in all facets of employment. client maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks. We encourage veterans, disabled veterans and disabled individuals to apply for any open position for which they feel they are qualified.


RESPONSIBILITIES:
In this full-time hourly position you will develop, build and modify equipment used to test electronic, electrical, and electro-mechanical components and systems; this will include determining the layout of circuitry and the design and fabrication of new test equipment, as well as repairing and updating existing units to enhance performance and usability.

Youll determine the best methods of test equipment construction, review design drawings and schematics for discrepancies, and recommend changes in test equipment fabrication and design processes.

REQUIRED EXPERIENCE:
You will need at least five years of electronics experience, with a strong background in mechanical fabrication. Other attributes that will enable you to do this job effectively include:

Knowledge of electronic parts and circuitry.
Experience in prototyping and laying out circuit boards.
Ability to work from schematics, engineering specifications, data sheets, and wiring diagrams.
Proficiency in the proper use of hand tools and power tools (such as drills), as well as other necessary equipment such as multimeters.
Good communication skills are necessary in order to work effectively with team members, supervisors, and other employees.
Familiarity with sheet metal and Plexiglas fabrication processes and prior experience building electronic test stations is preferred.
A relevant associates degree is a plus.

Openings will be first and may require occasional travel to our facility in Torrance during the next 4-6 months until work being done there has been moved to our Torrance location.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift, Fulltime, Saturday Ending

 
Job Number: 163877
Job Location: San Carlos, CA
Rate: $25 to $35.00 DOE
Duration: 5 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com