Job Search Results

272 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/22 Monday 12:28AM Pacific Time by ContractJobHunter. )

Listings 1 - 272

Go To My Job Tracker

Expand all descriptions

- Assembler - Level 1

Description:
PDS Tech is seeking a candidate for the Assembler 1 position located in Northford, CT.  

Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary
Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.
 
Job Number: 1810080003
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/17/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eqwAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2393 - EEDA SPECIALIST - cv, word doc only

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.

Possess, as a minimum, a Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Possess a minimum of 8 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

You may also have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

You are also able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management.

Experience with certification authorities' liaison is an asset.
 
Job Number: 2393
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2403 - MECHANICAL DESIGNER - SURFACES - cv, word doc only

Description:
Integrate all foam and upholstery build-up and installation on the seat and divan frame

Produce datasets (detail, assembly and Installation), 3D and 2D

Produce and maintain engineering drawings that define the interfaces, details and installations

Supports the W/P integrators in the design.

Produce deliverables such as PCD (procurement control drawing), AMOs (advanced material order) etc

Develop/Design with the Program's design intent and vision.

Closely communicate with supporting functions, Methods, operations, Customer support, design lead, Industrial Design, Weight and M&P.

Design for manufacturing and assembly.

Provide engineering support to Manufacturing for the installation.

Integrate all foam and upholstery build-up and installation on the seat and divan frame.

Highlight and mitigate risks to be able to meet commitments

Respect and follow guidelines BES / BAPS / BM / PDJ / standards/practices, processes and lessons learned.

Ensure design rules are respected and participate to populate the design guide lines.

Ensure the work (dataset & deliverables) are met on time with quality

Ensure customer and production standards are met.

Lead design activities with methods, production, logistics before entry in production.

Maintain an updated detailed product structure of their product, ( IDL, 3D product structure, Options matrix, etc)

Manage priorities to meet assigned deadlines.

Have a college or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have relevant technical experience in interior completion.
Experience on Client Platform, Seating Design or Integration is an asset, as well as, configuration and spec%u2019ing experience.

Have solid experience working with Enovia/VPM Nav and Catia V5 (two (2) to five (5) years).

Have the understanding of product structure and relational modeling.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have strong verbal and written English communication skills including verbal French.

Also demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.
 
Job Number: 2403
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2434 - PROJECT MGMT - MATERIAL CONTROL - cv, word doc only

Description:
Document processes and define function-specific requirements

Establish project timelines ensure their implementation

Carry out improvement projects of various magnitudes, relating to Material Control (warehousing, internal transport, Expeditor)

Act as change agent at all levels

Propose and implement improvement ideas

Participate, organize, and facilitate improvement workshops with various stakeholders

University degree in Industrial Engineering or Business Administration, Logistics or Operations Management, or equivalent training / experience

Your teamwork skills are proven and you are recognized for your leadership

Are motivated by continuous improvement and enjoy project management

Are at ease in a unionized environment

Are ready to travel as required

Bilingual - must have excellent communication skills, both written and verbal in both English and French.

Knowledge of SAPand SAP-EWM is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Knowledge on implementation of change management activities is an asset.
 
Job Number: 2334
Job Location: Mirabel, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/06/2018
Last Updated: 06/14/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Cartersville, GA.  
Please reach out to Mindy Jones mjones@pdstech.com or call her at 480.212.0847

In this role, you will make utility metering equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080238
Job Location: Cartersville, GA
Duration: 4 months
Input Date: 05/22/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Jones
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOCAAY&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Northford, CT.  
Please reach out to Betsy Murphy bmurphy@pdstech.com or call her at 203.415.9123

In this role, you will make fire protection controls and safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble electromechanical parts by using power drivers and/or manual tools.
  • Test Assembly Boards using automatic computer type testers.
  • Assemble metal boxes for the finished units using power drivers or manual tools.
  • Assemble carton boxes and inserts to pack the finished units.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080250
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/10/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fQSAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Work as a member of a team of systems engineers performing and providing technical direction for the development, engineering, interfacing, integration, and testing of complex hardware/software for Mission Systems products consisting of military and civil flight data recorder products and/or military stores management systems products while positively affecting short-term and long-term business goals and objectives.



" Experience in the following systems engineering lifecycle phases: concept development, requirements management, system architecture, system design and development, systems integration, systems verification & validation

" Experience working on projects with a requirement for RTCA/DO-254, RTCA/DO-178B/C or equivalent

" Familiarity with Military interface and environmental standards such as MIL-STD-1553, MIL-STD-1760, MIL-STD-461, and MIL-STD-810

" Experience with engineering tools such as Dimensions, DOORS, or Enterprise Architect

" Familiarity with basic programming and scripting languages such as Visual Basic, Python, or C

" Familiarity with Problem Reporting and Change Control processes

" Existing Systems expertise within the Aviation Industry

" Provide required customer interaction to specify top-level requirements for systems that meet the customer goals and further refine these top-level requirements into specifications, architectures, configuration baselines, and lower-level requirements suitable for implementation

" Responsible for project planning activities, including work tasks, project scope, schedule and budget




 
Job Number: 18-23067
Job Location: Grand Rapids, MI
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-17 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 06/05/2018
Last Updated: 06/17/2018
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer
Savannah, GA
Rate: $55-$62

Unique Skills:

Unique Skills: -This position provides technical and project oversight of projects for Post-TC design changes for company's certified aircraft. -The chosen candidate will serve as a liaison between the company (the applicant) and FAA/ODA, engineering focal and other Civil Aviation Authorities. - The chosen candidate must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in aircraft TC and Post-TC design change (both major & minor) projects is highly desirable Education and Experience Requirements: Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities. Position Purpose: Under minimum supervision, performs a variety of engineering tasks to support Post-TC (Type Certificate) major design change projects and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations. Principle Duties and Responsibilities/Essential Functions: 1. Reviews Post-TC Major Design Change Projects data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure Cert documentation is prepared and processed in accordance with approved procedures. 2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance. 4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects. 5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations. 6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products. Additional Functions: 1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues. 2. Develops department training material. 3. Assumes responsibility for assigned projects, tasks, or processes. 4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues. 5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned. Other Requirements: 1. Must be proficient in working with MS Office software. 2. Strong background with Federal Aviation Administration (FAA) certification processes. 3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must be very experienced in working with regulatory requirements. 5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 6. Must have excellent organizational and planning skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 9000
Job Location: Savannah, GA
Rate: $55-$62
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/02/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer Contractor I

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• This position provides technical and project oversight of projects for Post-TC design changes for company's certified aircraft.
• Serve as a liaison between the company (the applicant) and FAA/ODA, engineering focal and other Civil Aviation Authorities.
• Must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects.

Principle Duties and Responsibilities:
• Reviews Post-TC Major Design Change Projects data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements.
• Must be very experienced in working with regulatory requirements.
• Strong background with Federal Aviation Administration (FAA) certification processes.
• Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
• Makes decisions and recommendations that are recognized as authoritative to ensure Cert documentation is prepared and processed in accordance with approved procedures.
• Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures.
• Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
• Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
• Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
• Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products. Additional Functions:
• Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
• Develops department training material.
• Assumes responsibility for assigned projects, tasks, or processes.
• Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
• Keeps abreast of changes to regulatory requirements and guidance material.
• Minimum travel required.


Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-246
Job Location: Savannah, FL
Rate: $55-$62
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/08/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technology Expert (Aerospace) - China

Description:
As part of the leading aerospace company in China this advanced materials and manufacturing are seeking an Senior Engineering Expert in all aspects of composite materials and structures for modern civil aircraft. Working closely with the group's design and manufacturing centres the Composites Expert is responsible for ensuring that the aircraft composite structures design can be manufactured using the latest fabrication and manufacturing techniques. Responsibilities include:

* Liaising with design department regarding the related manufacturing tools development.

* Overall composite development, establish design methods, manufacturing and test process.

* Providing expertise in composite design and manufacturing techniques

For this role you will be degree qualified and have extensive experience within the field composite fabrication and manufacture for aircraft. In addition you will have demonstrated an understanding of composite structure design & analysis and how this relates to the manufacturability of these structures. Project management abilities and knowledge of quality and continuous improvement techniques is also required.

This role will be based at the client's modern manufacturing facilities in Shanghai and will be an initial 2-3 year fixed-term employment contract comprising an attractive basic salary with medical cover and allowances for accommodation, local transport, home leave travel provided.
 
Job Number: JO0000000126
Job Location: China
Rate: to $200k
Duration: 2-3 years
Start Date: Aug 18 onwards
Input Date: 06/22/2018
Last Updated: 07/05/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Controls Engineer- Equipment and tooling
Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.
(Not mandatory but good too in any of the below):
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/05/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
**Must be a U.S. Person for purposes of export compliance. A U.S. Person is defined as either a Green Card Holder or U.S. Citizen.**

**NEED CANDIDATES TO START IMMEDIATELY WITHIN THE NEXT 2 WEEKS!**

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 30657-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 05/31/2018
Last Updated: 06/12/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter - Level 2

Description:
Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description
- Create drawings from Creo Models for industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Involved with start-up activities associated with new product introduction including ordering, tracking, final prove in of tooling, and process development and implementation.
- Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
- Provide technical guidance and support to manufacturing assembly team.
- Apply lean manufacturing techniques to reduce cost and increase yields.
- Investigate root cause of failures/defects and implement corrective action to support continuous improvement.

Skill/Experience/Education
Mandatory:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds.

Desired:
- Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
- SAP experience
- Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
 
Job Number: 9375
Job Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Lead efforts in designing, building, and testing of electrical systems for military, commercial and industrial electronic applications. The candidate will provide electrical engineering expertise and participate in multi-discipline integrated product team working closely with Program Managers and Systems, Software, Mechanical, Electrical and Manufacturing Engineers.


Working knowledge of OrCAD, PADS, Altium, AutoCAD and Solidwork
Experience with leading the Hardware Development Process, including CM, MRB, SDR and analysis
Hands-on experience with the full product life-cycle from engineering proposal to manufacturing release
Experience with military and commercial standards (MIL-STD-461, MIL-S-901D, IPC-610, FCC/CE)
Familiar with MATLAB, C/C++ and other programming languages.
Familiar with mixed signal schematic and PCB layout techniques
 
Job Number: 42270
Job Location: Waltham, MA
Per Diem: pos
Overtime: pos
Duration: 6 mont +
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Requirement# AERO-REQ-0822
Work Location Palmdale, CA
Work Week 9/80-A
Priority High
Needed Date 06/05/2018
End Date 05/31/2019
Number of Resources 1
Security Clearance Secret


Title Electrical Engineer-N
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating wiring harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents.
Skill/Experience/Education
Mandatory:

Experience creating electrical architectures/schematics and wiring harness design.
Desired:

Experience using wiring harness design tools such as Mentor Graphics Capital Harness or HarnesSyS. Experience performing electrical load analysis and electrical power system integration. Experience with CATIA V5. Experience generating System Checkout Procedures and providing support. Experience incorporating subsystem hardware into a System Integration Lab (SIL) and troubleshooting integration issues. Experience working with manufacturing during build up to troubleshoot systems.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness.
6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics.
6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems.
6-8 Years No
Lab and Vehicle Checkout Test and identify failures for system integration lab and aircraft electrical systems.
4-5 Years No


Interview Required Yes

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0822
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 05/21/2018
Last Updated: 07/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Substation or Power Engineer - TV

Description:
Job Description:

Our client has 15 openings for Electrical Engineers with any substation and/or power engineering experience.

These openings range in experience from 2 years of experience up to 20 years experience.

Will work on Distribution Engineering & Planning, Equipment Engineering, Substation Design, transmission and Industrial Power Engineering & Planning .
Will also work on Relay Engineering (protective relaying and control), Transmission Engineering & Planning, CYME & PSSE Modeling & Solution Development, Smart Grid

Minimum Qualifications

Staff Engineer: Bachelor’s Degree in Electrical Engineering (BSEE) & 2-plus years of experience in the given engineering discipline, including substantive work-lead or involvement in the management of engineering-related projects or initiatives.

Senior Engineer: Bachelor's Degree in Electrical Engineering (BSEE) & the knowledge and capabilities typically acquired through 4-plus years of job-relevant experience.

Principal Engineer: Bachelor's Degree in Electrical Engineering (BSEE) & 6 plus years of experience in the given engineering discipline, including substantive work-lead or involvement in the management of engineer-in-related projects or initiatives.
 
Job Number: 62327044-TV
Job Location: Detroit, MI
Input Date: 06/07/2018
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Terry Valliere
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer

Description:
Description:
Analog and digital electronics, PCB, Verilog, FPGA Design Engineer. Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

Mandatory:
Electronic Circuit Design Engineer. Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required. Excellent communication skills. Requirements flow down preparing and presenting design reviews.

Desired:
Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design. Test engineering experience - hands on with laboratory test equipment. Integrated circuit design. MATLAB, C++, and other programming. Proficient with electronic design and simulation tools.
 
Job Number: 09699
Job Location: Santa Barbara, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Do you have at least 3 years experience installing and testing electrical aircraft and/or avionics systems? If so, apply today to be a part of our client's team in Kentucky!

The ideal candidate for this position will perform the following tasks:
* Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment.
* Fabricate harness and electrical assemblies.
* Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish work.
* Work under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy.

Mandatory Qualifications and Experience:
* Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals.
* Minimum of 3 years experience installing and testing of aircraft electrical / avionics systems.
* Successful completion of a military or civilian equivalent electrical / avionics training course.
* Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
* Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools and applicable test equipment.
* Experience in utilizing electrical test equipment such as digital multi-meters and oscilloscopes.
* Must be able to obtain a security clearance.

Desired Qualifications and Experience:
* Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
* Experience soldering.
* Experience with harness fabrication.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127834
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 06/18/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.

Hours:
3rd Shift
 
Job Number: 169255
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/16/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.
 
Job Number: 169253
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/06/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Design Structures - 4 with active secret / Catia V5 or NX Fibersim CA

Description:
161724/1647

Engineer Design Structures - 4 (Job Number: 18007467)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Jun 4, 2018

Target End Date: May 3, 2019

Pay Rate: $65-$70/hr

Location: Palmdale, CA

Work Week: 9/80A

Duration: 1 year

The successful candidate will be responsible for new conceptual layouts, detailed engineering designs of metallics and composites, modifications, integration of advanced technologies, BTP/PDP releases, and performing technical reviews.

The candidate is expected to be thoroughly versed for primary Structural Design and GD&T. CATIA V5 and/or NX experience is required. FiberSIM experience strongly preferred.


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD
from accredited institution
• Experience with Geometric, Dimensioning and Tolerancing (GD&T).
• Knowledge of F-35 tools and processes.
• Experience with BTP development, applicable notes, BOM, sign-off process.
• Experience with CPLM, Teamcenter, FiberSIM, CATIA V5 and/or NX-CAD.


Preferred Qualifications:
• Master’s Degree or PhD in ME, AE or Civil Eng (Structures) Design emphasis.
• Expert knowledge of Geometric, Dimensioning and Tolerancing (GD&T).
• Demonstrated affordability approaches in structural designs, including integration of platform build sequences and designing for manufacturing.
• Minimum 5 years of aircraft/spacecraft design experience, including clean sheet airframe layout, detailed drawing releases, and supporting build.
• The ability to obtain a DoD Top Secret clearance.
• Team player and demonstrated exceptional collaboration
 
Job Number: MB-1647
Job Location: Palmdale, CA
Rate: 65-70/hr DOE
Per Diem: no
Duration: 1 year
Start Date: 9/80
Input Date: 06/28/2018
Last Updated: 06/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 6-7 months Description: Key Skill Needs: - Experience leading control system design projects for aerospace and/or automotive industries. - Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment. - Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers. - Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment. - Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc). - Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability. - Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners). - Systems thinking and ability to isolate issues from a variety of interlinked systems. - Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.) - Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects. - Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.) - Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment. - Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc. - Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively. Preferred Systems Experience/Knowledge: - Siemens TIA Portal - Siemens Step 7 PLC programming software - Siemens WinAC RTX - Siemens SINUMERIK 840 D SL System Maintenance and Programming - Siemens SIMOTION software - Siemens HT8 and HMI Pro software - Siemens WinCC Advance and WinCC Flexible HMI programming software - Siemens SCALANCE industrial network switches X408, X308, X208, etc... - Siemens Simatic IT software suite - Sunrise AGV software - Siemens PROFINET Primary Setup Tool - SICK Safety Scanner Configuration & Diagnostic Software (CDS) - Kepware or similar OPC software Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-08984
Job Location: Everett, WA
Input Date: 06/05/2018
Firm Name: ICONMA LLC
Attention: sachin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer
 
Job Number: 18-08984
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: 6/23/17
Input Date: 05/30/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity

Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.

Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 365895
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
RESPONSIBILITIES:
Provide Industrial Engineering support to build team leaders and program Industrial Engineers - Provide guidance and standard work in a newly implemented lean environment - Collaborate with all appropriate stakeholders to improvement business performance

REQUIRED EXPERIENCE:
3+ years of Industrial engineering experience in a manufacturing environment - - Proficient in MS Office tools
Experience with lean concepts 4-5 Years
Experience in IE applications and skills needed to support manufacturing 4-5 Years
Proficient in data extraction from systems like SAP and the ability to perform an array of statistical and trend analysis 4-5 Years

PREFERRED EXPERIENCE:
Bachelor degree or above- Communicate effectively with all levels of the organization - Experience driving successful change by engaging stakeholders and building alignment - Experience in lean manufacturing principles and plan-do-check-act continuous improvement

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80,1st Shift
Full-Time
 
Job Number: 171417
Job Location: Fort Worth, TX
Rate: $43/hr - $60/hr
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Duties & Skills



  • Be a key member of the team charged with process discovery and deployment, process control and problem resolution

  • Contributes to and sometimes leads cross-functional team activities related to transitioning developed processes into a stable production environment. 

  • Following established guides and checklists, ensure all identified requirements for successful production are addressed, completed and verified. 

  • Key team member defining technical problems and solutions in manufacturing environment. Responsible to act as liaison with design engineering on incorporating changes to the designs which improve manufacturability. 


 


Key Experience Elements



  • Experience in a Lean Manufacturing, continuous improvement environment is desirable

  • Experience in optics fabrication, optical coating and/or optical products assembly and test is desirable.

  • Experience in assembly and test procedure, product configuration and documentation is desirable. 

  • Demonstrated skills in statistical process control and statistical analysis for manufacturing is desirable.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and identified skills and experience are required. 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14050
Job Location: Carlsbad, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
  • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  • Collects and analyzes data and metrics and presents the information to large audiences.
  • Provides productivity planning with accompanying future strategies for improvement.
  • Develops and maintains engineered time standards.
  • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  • Develops and maintains plant standards.
  • Creates and maintains valve stream maps.
  • Plans, schedules, and prioritizes work to meet established deadlines.
  • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  • Determines and improves processes to meet production levels.
  • Schedules and sequences job plans (with ME approval) to support effective work flow.
  • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
Experience in aerospace industry in aerospace manufacturing a plus.

Knowledge, Skills and Abilities:
  • Strong analytical and innovative skills.
  • Strong work ethic.
  • Ability to multitask.
  • Ability to work under minimal supervision.
  • Detail oriented.
  • Excellent problem solving skills.
  • Ability to read and interpret engineering drawing and/or specification requirements.
  • Excellent communication skills, both verbal and written.
  • Excellent presentation skills.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

 
Job Number: 1810082205
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 03/05/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dz7iAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer conducts analysis with area Management and support staff to establish and maintain daily work activities. Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures. Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives. Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests. Support all Safety, Sustainability and Ergonomic initiatives as required. Develop and Implement plant layout, process flow, and material handling techniques. Support area Management in generating orders/requests for Tooling including management of tool priorities. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
Develop and maintain work place methods and manpower requirements. Assist in the training and development of entry-level industrial engineering personnel. As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Ability to influence across functional disciplines. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc. Lean Specialist certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: lt
Start Date: ASAP
Input Date: 02/19/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Industrial Engineer 2
(U.S. Citizenship Required*)
Everett, WA
2018-6188

Responsibilities:
• Apply Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations.
• Assist developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis & metrics for consultation to customers (e.g., management, departments, suppliers).
• Apply general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meet program requirements.
• Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through applying Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
• Under general supervision, manage, define, negotiate, and control scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
• Provide support to project completion.
• Utilize engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
• Under general direction, analyze and design value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
• Potential need of working off shifts or split 1st/2nd shift

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Degree from ABET accredited course of study, in engineering.


Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6188
Job Location: Everett, WA
Rate: Based on experience
Duration: 3 Months
Input Date: 06/12/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Saralynn Halsey
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Industrial Engineer 3
(U.S. Citizenship Required*)
Everett, WA
2018-6189

Responsibilities:
• Apply advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
• Independently develop models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
• Apply advanced industrial engineering techniques and concepts to product & process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
• Research, design develop, improve, and implement processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
• Independently manage, define, negotiate, and control scope, cost, and timing of projects, and perform risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
• Ensure project is completed within budget.
• Utilize advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
• Analyze and design value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
• Potential need of working off shifts or split 1st/2nd shift

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6189
Job Location: Everett, WA
Rate: Based on experience
Duration: 3 Months
Input Date: 06/12/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Saralynn Halsey
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• Strong project management skills. A minimum of 2 years project management experience. Ability to think outside of the box.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience


Essential Functions:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). 6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-239
Job Location: Savannah, GA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Location: Savannah, GA
Rate: $39.67 - $44.08/HR
Duration: Long Term Contract
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Strong project management skills. A minimum of 2 years project management experience. Ability to think outside of the box.

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Ability to influence across functional disciplines. 3. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 4. Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc. 5. Lean Specialist certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct analysis with area Management and support staff to establish and maintain daily work activities. 2. Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures. 3. Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives. 4. Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks. 5. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). 6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests. 7. Support all Safety, Sustainability and Ergonomic initiatives as required. 8. Develop and Implement plant layout, process flow, and material handling techniques. 9. Support area Management in generating orders/requests for Tooling including management of tool priorities. 10. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions. 11. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.

Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.
 
Job Number: 8655
Job Location: Savannah, GA
Rate: $39.67 - $44.08/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II & III - (Everett, WA)

Description:
SEVERAL OPENINGS IN EVERETT, WA.

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: IEWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 08/15/2018
Last Updated: 09/21/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III & IV - (MO)

Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: IEmo
Job Location: Saint Louis, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/05/2018
Last Updated: 08/10/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III - (LA)

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: IELA
Job Location: New Orleans, LA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III - (MO) - Active Secret Clearance

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: IEMO
Job Location: St. Charles, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/19/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineers

Description:
Must have active secret clearance
B.S. Engineering Degree
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-IE-MO
Job Location: St. Louis, MO
Rate: $52.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 07/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) - Secret Clearance

Description:
Information Systems Security Officer – Level 3 - Secret Clearance

Location: Sunnyvale, CA
Pay Rate: DOE
Duration: 3-4 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Skills Required
• Knowledgeable of information technology security technical principles, Information Assurance methodologies and concepts
• IS auditing experience
• Working knowledge of Security Technical Implementation Guides (STIG)
• Knowledgeable of Operating System security requirements
• Understanding of configuration management principles
• Must be a team player, self-motivated, and a quick learner
• Hands on experience with IA tools
• SIPRNet management experience
•Bachelor's degree and 9-15 years' experience or Master's degree and 7-13 years experience

Description:
'LMS Information Systems Cyber Security team is looking for an assertive and self-confident Information Systems Security Officer (ISSO) to partner with the program and government customers to perform the duties as a Secret Internet Protocol Router Network (SIPRNet) ISSO located at the LM-SPACE Sunnyvale, CA campus. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

The ISSO will oversee day-to-day information system (IS) security operations including hardware and software implementations. The ISSO carries out technical administration of IS and gives direction to the system administrators in accordance with internal LM and customer security requirements, primarily using National Industrial Security Program Operating Manual (NISPOM) guidance as it pertains to SIPRNET and additional customer direction. Ability to work independently as well as in a teaming environment. Adaptable to diverse office situations, procedures and demands.
Job duties include:
- Develop, maintain, and update security documentation to include SSP, SCTM, Continuous Monitoring, POAMs, RAR, SAR, etc.
- Auditing of the IS, system administrators and program engineers
- Constant upkeep, monitoring, analysis, and response to network and security events.
- Documents compliance actions within the approved automated compliance tracking system or develops a plan of actions and milestones (POAM) maintained, and disposed of in accordance with internal security policies and practices outlined in the security plan.
- Ensures configuration management (CM) for security-relevant IS software, hardware, and firmware is maintained and documented in accordance with baseline.
- Ensures all information system security-related documentation is current and accessible to properly authorized individuals.
- Ensures records are maintained for workstations, software, servers, routers, firewalls, network switches, telephony equipment, etc. throughout the information system's life cycle.
- Evaluates proposed changes or additions to the information system, and advises the ISSM of their security relevance.
- Assist and conduct security IS education.
- Participates in internal/external security audits/inspections; performs risk assessments
- Leads investigations of computer security violations and incidents, reporting as necessary to ISSM
- Ensure proper protection and / or corrective measures have been taken when an incident or vulnerability has been discovered
- Develop, implement and enforce Information Security Policies and Procedures together with ISSM/FSO
- Develop and oversee Information Systems Security Plans / SSP (Certification/Accreditation) together with ISSM
 
Job Number: 8963
Job Location: Sunnyvale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3+ mos
Start Date: ASAP
Input Date: 04/19/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Lead Mechanical Engineer - UT

Description:
Chipton-Ross is seeking a Lead Mechanical Engineer for an opening in Clearfield, UT.

RESPONSIBILITIES:
This position will support mechanical analysis projects supporting aircraft weapon system programs. Specifically, the engineer will provide analyses, planning and draft documentation to address mechanical, electrical or avionics systems safety, suitability, and effectiveness requirements. The engineer will perform Failure Mode and Effects Analysis, Subsystem Hazard Analysis, engineering and configuration analysis, and develop engineering technical requirements for aircraft mechanical, electrical or avionics system components. Tasks include but are not limited to engineering evaluation, analysis, and recommended disposition of technical assistance requests for aircraft mechanical, electrical or avionics systems. The engineer will use SolidWorks or other CAD programs to create 3D models of aircraft mechanical, electrical or avionics components. The engineer will develop and manage large MS Excel spreadsheets. The engineer will write technical reports detailing analyses in MS Word as well as Adobe Pro. This position may be tasked to support similar duties on various other USAF weapon systems.

EDUCATION/EXPERIENCE:
Accredited Bachelor's Degree in a Mechanical or Aerospace Engineering discipline from an accredited University with six (6) years of experience.

ADDITIONAL EXPERIENCE:
- AccreditedMaster's Degree in Engineering.
- Experience working on aircraft (Civilian/Military) mechanical, electrical, or avionics systems.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM
 
Job Number: 171283
Job Location: Clearfield, UT
Rate: $DOE
Duration: 6 Months
Input Date: 05/24/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER (with Aerospace experience)

Description:
This position will support mechanical analysis projects supporting aircraft weapon system programs. Specifically, the engineer will provide analyses, planning and draft documentation to address mechanical, electrical or avionics systems safety, suitability, and effectiveness requirements. The engineer will perform Failure Mode and Effects Analysis, Subsystem Hazard Analysis, engineering and configuration analysis, and develop engineering technical requirements for aircraft mechanical, electrical or avionics system components. Tasks include but are not limited to engineering evaluation, analysis, and recommended disposition of technical assistance requests for aircraft mechanical, electrical or avionics systems. The engineer will use SolidWorks or other CAD programs to create 3D models of aircraft mechanical, electrical or avionics components. The engineer will develop and manage large MS Excel spreadsheets. The engineer will write technical reports detailing analyses in MS Word as well as Adobe Pro. This position may be tasked to support similar duties on various other USAF weapon systems.
Required Skills & Experience
Bachelor’s Degree in a Mechanical or Aerospace Engineering discipline from an accredited University with six (6) years of experience.

Preferred Qualifications:
Master’s Degree in Engineering
Experience working on aircraft (Civilian/Military) mechanical, electrical, or avionics systems

Desired Skills & Experience
The ideal candidate will have:
Aircraft systems experience
Knowledge of finite element analysis techniques and SolidWorks or AutoCAD
Ability to interpret failure data from multiple DOD maintenance databases
Develop and manage large MS Excel Spreadsheets
Coordinate with other technical personnel in solving technical problems, gathering information, cost estimates and specifications
Compile and prepare comprehensive technical report
Work in a team environment and possess good communication skills, both written and oral
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0015
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: No
Input Date: 06/08/2018
Last Updated: 06/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing & Industrial Engineers (Aerospace - All locations WA)

Description:
Our Aerospace Client has openings for Manufacturing & Industrial Engineers:

Everett, WA - Hiring NOW
Seattle, WA
Auburn, WA
Renton, WA

Other surrounding areas.

Note: Job Description is fairly genetic.
Looking for Manufacturing Engineers/Industrial

Prefer Aerospace - Consider other.

HOW TO APPLY:
Email resume in MS WORD DOC to: Albert.Peniche@Yoh.com
Include Month & Day Birth.

DO NOT SEND IN PDF FORMAT.

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APMFGIE
Job Location: Everett, WA
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / CNC Programmer

Description:
CLIENT designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So, whatever the part, component or complexity of assembly, Triumph is committed to quality, service and meeting the specialized needs of each customer.

Client participates at all levels of the aerospace supply chain – from single components, to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft – from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage. We are looking for a Manufacturing Engineer/CNC Programmer with the following qualifications to perform noted functions.

Responsibilities:
• Responsible for creating complex 5-Axis programs for aerospace housings and covers using MasterCAM
• Responsible for specifying/determining the most efficient cutting tools for all features being machined
• Designing tools and fixtures using Pro-E/Creo
• Supporting shop floor production.
• Required to perform as business needs dictate other tasks including but not limited to auditing processes, inspecting hardware, travel, and participate in continuous improvement activities

Qualifications:
• Associates degree in Manufacturing Technologies
• Three years’ experience (must be recent) programming 3, 4 and 5-Axis machining centers and jig borers using MasterCAM.
• Three years 3D modeling experience with Pro Engineer/Creo
• Must have strong cutting tool knowledge, Vericut experience a plus.
• Strong analytical skills
• Excellent communication skills
• Familiarity with basic aerospace measuring tools
• Working knowledge of GD&T and part detailing
• Basic Computer Skills: proficient with Microsoft Word & Excel etc.
• Capable of effectively reading blueprints, specifications and manufacturing orders
• Experience creating detailed step by step work instructions and sketches for the manufacture of complex aluminum, magnesium and titanium housings and covers, a plus.
 
Job Number: 15197
Job Location: salt lake city, UT
Rate: open
Per Diem: direct hire
Duration: full time
Start Date: asap
Input Date: 06/07/2018
Last Updated: 06/12/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanism Design Engineer - Catia v5

Description:
Seeking an experienced Mechanisms Design Engineer focused on design, performance, manufacturing coordination, and installation integration of mechanism designs. The initial opportunity is related to interior seats, but there are many other opportunities to follow.

Responsibilities:

• Capable of creating design requirements, validating them, and decomposing them into an integrated verification plan for compliance/certification.
• Contribute to conceptual and preliminary design trades of varying complexity and document results of work
• Develop parametric CATIA V5 models that can be used to refine final mechanical designs
• Capable of interpreting engineering schematics to drive detail designs
• Works closely with prototype shop as well as production shop personnel to optimize design concepts
• Able to work closely with Industrial Design Engineers to integrate aesthetic and creative design requirements into design
• Supports the review of production planning and procedures to ensure compliance with design requirements
• Contributes to the creation of test plans in order to verify design intent, requirements and functionality
• Working knowledge of industry best practices; including design specifications (commercial and DOD), regulatory guidance (FAA AC), and aerospace recommended practices
• Expected to present work and technical findings to management and senior leadership through design reviews and program milestones where appropriate

Qualifications:

• BS in Mechanical/Aerospace Engineering or relevant engineering discipline
• 6+ years of experience in preliminary design, performance and/or integration of mechanical installations
• Experience with CATIA V5 and the CATIA kinematics tools
• Experience with Product Lifecycle Management tools
• Willingness to adapt and cross-train
• Strong team player with quality organization and pragmatic problem solving skills
• Expected to work independently as well with supervision given general guidance
• Experience with flight vehicles or vehicle systems certification to commercial standards (14 CFR Part 23 or 25) and/or military/government standards (DOD or NASA) is preferred

The Structures Company is an AA/EOE.
 
Job Number: 202
Job Location: Mojave, CA
Rate: $65-70/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/07/2018
Last Updated: 09/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Platform Cyber Security Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Platform Cyber Security Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-6115

Responsibilities:
• Support development of current & next generation cyber hardened military vehicle architectures
• Perform security research on military vehicle electronics to identify security vulnerabilities
• Perform security scans against military vehicle electronics
• Provide guidance on security scan results to military vehicle engineers
• Interpret US Government Cyber Security Standards and best practices, and apply towards military vehicle platforms
• Work with US Government Cyber Security personnel, to include civilian and military to identify and mitigate security vulnerabilities
• Make recommendations concerning the overall improvement of military vehicle security posture through the proactive discovery of security weaknesses using penetration-testing techniques
• Provide guidance on security controls and assist in troubleshooting problem areas as needed
• Perform testing using defined methodologies and a combination of automated and manual tools
• Demonstrate critical thinking and creative analysis techniques in distilling test results, eliminating false positives and providing actionable recommendations for mitigation

Qualifications:
• Familiarity with embedded systems, automotive or military electronics (or equivalent)
• Familiarity with carrying out penetration testing
• Must be able to adapt immediately to changing business rules, program direction, and workflows
• Must have ability to balance multiple tasks and assignments
• Must be proficient in the Windows operating system
• Must be able to work effectively in teams
• Occasional travel will be required.
• Ability to obtain a security clearance
Preferred:
• Experience conducting reverse engineering to find security vulnerabilities in embedded devices and their associated firmware
• Previous security research experience
• Previous vehicle architecture development experience
• Previous embedded system development experience
• Experience carrying out security testing
• Familiarity with web based penetration testing
• Competency with security testing tools and procedures for information security
• Extensive technical computer/network/vehicle knowledge and understanding of computer/military vehicle hardware, software, networks, communications and connectivity
• Experience with social networks / social engineering vulnerabilities
• Experience with and/or knowledge of technologies used to secure embedded systems
• Technical proficiency in CAN, Python, HTML/XML, Java, JavaScript, C/C++, Linux, Ada, Assembly Code, VM Ware, ethical hacking tools
*U.S. Citizenship is required by law, regulation, executive order, or government contract.


Education and Experience:
• Bachelor’s degree with a minimum of 10 years applicable experience. Fewer years will be considered with an advanced degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6115
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeff Prukop
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Representative Program & Production Control

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Representative Program & Production Control
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-6100

Responsibilities:
• Analyze manual purchase requisitions for proper approvals, quality codes, and data packages.
• Determine Planning Path forward based upon MRP data.
• Minimize excess inventory by analyzing MRP planning across multiple locations, and facilitate transferring material between physical locations.
• Oracle Master Scheduling and Planning of Independent and Dependent demands.
• Perform project transfers to align inventory to requirements as needed.
• Verify requirements using various systems including but not limited to Oracle (MRP), TipQA, Teamcenter, etc.
• Conduct planning reporting and analysis.
• Create charts of pertinent data for management review.
• Interface with procurement, Engineering, SE, and Production teams as required.
• Work with Bill of Material representatives to resolve planning issues.
• Assist material requisition requesters on creating requisitions and providing requisition status.
• Ensuring proper labor charging for working a requisition.
• Coordinate planning activities across multiple plant locations.

Qualifications:
• MRP planning knowledge (discrete and inventory based) and analysis experience highly desirable
• Oracle MRP Planning and ERP knowledge and experience highly desirable
• Strong interpersonal skills; solid communication skills (oral and written)
• Self-directed; attention to detail and follow-up
• Able to work in a team environment and under pressure (i.e. compressed deadlines)
• Strong time management skills
• Proficient Microsoft Office Suite skills (Excel, Access, Word, PowerPoint, etc.)
• Travel required
• Must have the ability to obtain a security clearance if required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree required; major in Business, Management or Supply Chain preferred.
• 1-5 years’ experience in any of the following areas preferred: Manufacturing, Supply Chain Management, Process Engineering, Materials Management, Industrial Engineering

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6100
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic/Control Engineers (PLC) - Many Needed

Description:
**Must have a B.S. Degree
Experience leading control system design projects for aerospace and/or automotive industries.
Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.

**Must be able to start within 2 weeks from acceptance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-WA-PLC
Job Location: Everett, WA
Rate: $75.00-$85.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Shipping & Receiving Specialist

Description:
PDS Tech, Inc. is seeking Shipping & Receiving Specialists in Bolingbrook, IL.  Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480.351.2945

In this role, you will assist the teams that make personal protection equipment used to protect electrical workers from the hazards of their job.

What you will do:
  • Pick, pack, and prepare items for shipment using a forklift or other vehicle or tool.
  • Scan items and verify orders.
  • Create shipping labels.
  • Wrap skids to load into truck. 

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training and certification in the operation of Power Industrial Vehicles, such as forklifts, stand up, and cherry pickers 
  • Opportunity to work with a team making products to keep others safe
  • A fair and consistent pay check


Skills and equipment you will need:
  • Experience with FedEx, UPS, and LTL Freight
  • Steel-toed shoes required
  • Experience working in a warehouse environment

Education Required:

  • High school diploma or GED

Experience Desired:

  • Experience operating forklifts, cherry pickers, and RF Scanners 

Schedules/Shifts Available:

  • Most positions are 2nd shift, 2:30 pm – 11:00 pm
  • Overtime may be available, including some Saturdays 

 
Job Number: 1810080229
Job Location: Bolingbrook, IL
Duration: 8 months
Input Date: 05/31/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fKwAAI&URLSource=cjhunter

Shipping/Receiving Specialist

Description:
PDS Tech Inc. is seeking candidate for Shipping/Receiving Specialist, located in Muncie, IN.

Summary:
  • Candidate will be working in the shipping department.
  • Candidate will be working with spray foam and instapak.
  • Must be able to understand packing slips.
  • Attention to Detail (candidates will be verifying orders are complete before shipment).
  • Use of hand trucks (full-time employees generally use the powered industrial vehicles in this area).
  • Must be a team player.
  • Ability to use a tape measure (measurements must be placed on boxes for export).
  • Load delivery trucks.
  • Possess good penmanship (packing slips must be readable).
  • This area can be very physical (a lot of lifting and bending involve).
  • Confirms and records the receipt of shipments, prepares items for shipping, and loads and unloads trucks.
  • Reports damages and discrepancies for accounting, reimbursement and record-keeping purposes.
  • Completes shipping and receiving reports.
  • Also responsible for managing the inter-departmental transport of materials.
  • Relies on extensive experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a manager or head of a unit/department.


Prerequisites:
  • Requires a high school diploma or equivalent with 0-2 years experience.
  • Familiar with a variety of the field's concepts, practices, and procedures.


 
Job Number: 1810084333
Job Location: Muncie, IN
Duration: 8 months
Input Date: 04/06/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mMByAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Composite Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Overview:


Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.


Experience is design of laminates, sandwich structures, and bonded and bolted assemblies


 


Role description & Responsibilities:


Highly motivated design engineer with experience designing composite structures and assemblies for military and/or commercial aircraft.


Responsibilities include but are not limited to the design of laminates, sandwich structures, and bonded and bolted assemblies.


Skills should include relationally linked modeling, establishing datum schemes for assemblies, and performing tolerance stackup analysis.


 


Experience Requirements:


Minimum of 10 years related experience in design engineering function


Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design


Experience leading a team of engineers


Assembly level design including establishment of data schemes and tolerance analysis


Knowledge of composite materials and manufacturing processes


 


Experience Preferred:


Definition of layups and ply patterns with Fibersim


CAD automation, programming, script writing


Previous experience in aerospace manufacturing facility


 


Education/Certifications:


BS degree in Civil, Mechanical, Aerospace Engineering, or related


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8024350
Job Location: Clearfield, UT
Rate: 75-85
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
US Citizenship is required

JOB DESCRIPTION:
A senior mechanical or a structural engineer with minimum 5 years of Finite Element Analysis experience to perform linear and non-linear analyses.
REQUIRED SKILLS:
• Candidates must be fully competent in the area of implicate finite element modeling and analysis using LS-DYNA, and Altairs HyperWorks suite.
• Proficiency in MSC, Nastran and ANSYS is a plus but not required.
• In addition, candidates need to have excellent oral and written communication skills, and must be able to work effectively in a team environment.
• Candidate with an MSME is desired, however not required.
• Consideration will also be given to strong BS candidates in mechanical or civil engineering with a focus on structural design and analysis and a minimum of 5 years work experience in this area.
• Candidate should have good working and theoretical knowledge of static, dynamic, shock, and vibration analysis
PREFERRED SKILLS:
Building quality complex shell and solid models of components including full vehicle chassis system models.
REQUIRED EXPERIENCE:
2 to 5 years with MSME or min 3 years with BS
PREFERRED EXPERIENCE:
3 to 5 years with MSME, or min 5 years with BS. Previous experience with Military Tracked vehicles are a plus. Experience with fast pace, and fast turnaround of solving structural manufacturing and design related issues is beneficial.
REQUIRED EDUCATION:
BS or MS in structures or Mechanical
PREFERRED EDUCATION:
MSME
ADDITIONAL INFORMATION:
This position demands quick thinking and practical problem solving skills.

Hema Murali
Senior Technical Recruiter
Apollo Professional Solutions, Inc.
Tel: 860-254-6337
hmurali@apollopros.com
 
Job Location: San Jose, CA
Rate: 52
Per Diem: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/07/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Hema
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
No Clearance Required

Candidates must be fully competent in the area of implicate finite element modeling and analysis using LS-DYNA, and Altair’s HyperWorks suite. Proficiency in MSC Nastran and ANSYS is a plus but not required. In addition, candidates need to have excellent oral and written communication skills, and must be able to work effectively in a team environment. Candidate with an MSME is desired, however not required. Consideration will also be given to strong BS candidates in mechanical or civil engineering with a focus on structural design and analysis and a minimum of 5 years work experience in this area. Candidate should have good working and theoretical knowledge of static, dynamic, shock, and vibration analysis
 
Job Number: 2977
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/07/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Per Client: US Citizenship is Required
A senior mechanical or a structural engineer with minimum 5 years of Finite Element Analysis experience to perform linear and non-linear analyses.

Skills Required:
• Candidates must be fully competent in the area of implicating finite element modeling and analysis using LS-DYNA, and Altair’s HyperWorks suite.
• Proficiency in MSC Nastran and ANSYS is a plus but not required.
• In addition, candidates need to have excellent oral and written communication skills, and must be able to work effectively in a team environment.
• Consideration will also be given to strong BS candidates in mechanical or civil engineering with a focus on structural design and analysis and a minimum of 5 years work experience in this area.
• Candidate should have good working and theoretical knowledge of static, dynamic, shock, and vibration analysis.

Skills Preferred:
• Building quality complex shell and solid models of components including full vehicle chassis system models.

Experience Required:
• 2 to 5 years with MSME or min 3 years with BS.

Experience Preferred:
• 3 to 5 years with MSME, or min 5 years with BS.
• Previous experience with Military Tracked vehicles are a plus.
• Experience with a fast-pace and fast turnaround of solving structural manufacturing and design related issues is beneficial.

Education Required:
• BS or MS in structures or Mechanical.
 
Job Number: 29779
Job Location: Sterling Heights, MI
Per Diem: No
Overtime: Possible
Duration: 11 months - could go longer
Start Date: ASAP
Input Date: 06/04/2018
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Job Description
**This is a contract assignment, projected for 12 months, unless extended**
*This position can be located in either Sterling Heights, MI, York, PA, or San Jose, CA**

**This position specifically requires US Citizenship**

Description:

Our client is looking for a senior mechanical or a structural engineer with minimum 5 years of Finite Element Analysis experience to perform linear and non-linear analyses.

Skills Required:

Candidates must be fully competent in the area of implicate finite element modeling and analysis using LS-DYNA, and Altair’s HyperWorks suite.
Proficiency in MSC Nastran and ANSYS is a plus but not required.
In addition, candidates need to have excellent oral and written communication skills, and must be able to work effectively in a team environment.
Candidate with an MSME is desired, however not required.
Consideration will also be given to strong BS candidates in mechanical or civil engineering with a focus on structural design and analysis and a minimum of 5 years work experience in this area. Candidate should have good working and theoretical knowledge of static, dynamic, shock, and vibration analysis.
Skills Preferred:

Building quality complex shell and solid models of components including full vehicle chassis system models.

Experience Required:

2 to 5 years with MSME or minimum of 3 years with BS
3 to 5 years with MSME, or minimum of 5 years with BS.
Previous experience with Military Tracked vehicles are a plus.
Experience with fast pace, and quick turnaround of solving structural, manufacturing, and design related issues is beneficial.
Education Required:

BS or MS in structures or mechanical

Other:

This position demands quick thinking and practical problem solving skills.
 
Job Number: BH-457
Job Location: multiple, multiple
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 3 weeks
Input Date: 05/31/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Chris
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis Engineer

Location: Everett, WA
Duration: 10 months

Job Description:
Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Works under minimal direction.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Additional job details:
Degree is required, preferred degrees would be in Mechanical, Aero or Civil.
preferred degrees would be in mechanical, aero or civil

Skill Code: 63Y-Structural Analysis

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 16-114920
Job Location: Everett,, WA
Input Date: 05/08/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Structural Analysis Engineer ( Clearfield, Utah ) S6742971 & 8024348

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S6742971 & 8024348
12 Month Contract

Pay Rate: $70-80 /hr W2

• Must have an active clearance with an investigation within the last 4.5 years

JOB DESCRIPTION:
• Talented Sr. Composite Structure Analysis Engineer with experienced in composite structures and assemblies for military and/or commercial aircraft and experience with the characterization of composite materials with ASTM standard tests.
Top three skills:
• Must have an active clearance with an investigation within the last 4.5 years
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)

Bottom three skills :
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team Experience Preferred
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
 
Job Number: S8024348
Job Location: Clearfield, UT
Rate: 80
Per Diem: Split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 09/07/2018
Last Updated: 10/12/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Email: Timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret CA

Description:
Job title: Structural Analysis Engineer
Job Number: 8216402
Location: Irvine, CA
Compensation: 80/hr DOE
Assignment Length: 12 Months
**Active Secret Clearance to start**

JOB DESCRIPTION:
• Talented Sr. Composite Structure Analysis Engineer with experienced in composite structures and assemblies for military and/or commercial aircraft and experience with the characterization of composite materials with ASTM standard tests.

Top three skills:
• Must have an active secret clearance with an investigation within the last 4.5 years
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)
Bottom three skills :
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team Experience Preferred
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable


Role description & Responsibilities:
Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft. The candidate should also have experience with the characterization of composite materials with ASTM standard tests. Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
• MUST HAVE AN ACTIVE SECRET CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• **Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)**
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)
• Static structural and structural/thermal analysis
• Buckling, stability, and modal analysis
• Loads definition
• Material characterization testing
• Knowledge of composite materials and manufacturing processes
• Oral and written communication skills
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Script writing, workflow automation
• Constitutive Model Development and implementation
• Requirements definition and verification
• Previous experience in aerospace manufacturing facility

Skills & Qualifications:
• Strong interpersonal skills with the ability to work with a team
• Excellent communication skills are required.
• Ability to make sound decisions
• Ability to multi-task
• Ability to prioritize and manage time effectively

Education/Certifications:
• BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: JE-8216402
Job Location: Irvine, CA
Rate: 80/hr
Per Diem: no
Duration: 12 months
Input Date: 06/14/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051185
Job Location: Denver, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLkAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051152
Job Location: Houston, TX
Duration: 12 months
Input Date: 06/09/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydHEAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/18/2018
Last Updated: 10/20/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Systems Engineer - (2) - CA - C

Description:
Chipton-Ross is seeking 2 Systems Engineer 4 located in El Segundo, CA

RESPONSIBILITIES:
As an Experienced DSP Subsystems/Algorithms Engineer (Level 4), you will design and develop state-of-the-art, space based communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated team that works with domestic or international customers on their latest satellite systems.

Subsystems or Algorithm duties include:
o Designing and developing next generation RF and digital satellite communication systems
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Performing trade studies
o Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
o Supporting HDL-level design and verification
o Performing detailed system design and verification activities
o Leading teams
Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to or lead a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 3+ years of experience with Matlab or Simulink.
- 5+ years of experience in Digital Signal Processing or Digital Communications
- 5+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture design and trade design).
Preferred Skills:
- Proficiency in Matlab/Simulink.
- Experience leading teams of engineers.
- Experience working with ASICs or FPGAs
- Experience with lab equipment (oscilloscope, waveform generator, spectrum analyzer)
- Experience leading teams of engineers

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167899
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3 - CA - O/M

Description:
Chipton-Ross is seeking a Systems Engineer 3 located in El Segundo, CA

RESPONSIBILITIES:
As a DSP Subsystems Firmware Engineer (Level 3), you will design and develop state-of-the-art, space-based communication systems for commercial, civil and/or national security programs. You will be part of a highly-motivated team that works with domestic or international customers on their latest satellite systems.

Primary Responsibilities:
o Defining and developing satellite communications system and unit architecture
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Supporting trade studies
o Supporting unit-level integration and performance simulations
o Supporting HDL-level design and verification
o Supporting hardware procurement, design reviews, and unit sell-offs

Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers.
Join us, and you can build something better for yourself, for our customers and for the world.

Other Job Related Information/Qualifications:
Qualified candidate must have demonstrable experience in digital communication theory and systems, digital signal processing (DSP) concepts, waveform design and implementation, development of algorithms for hardware implementation on ASICs or FPGAs, and verification planning and principles, while applying their theoretical knowledge in resolving real world problems.

Basic Skills:
- 1+ years of education/training and/or work experience with Matlab and/or Simulink.
- 3+ years experience in Digital Signal Processing/Digital Communications algorithms and techniques (equalization, turbo/viterbi coding/decoding, channel estimation, filter design, resampling theory, etc.).
- 1+ years of experience working with ASICs or FPGAs.

Preferred Skills:
- Proficiency in Matlab/Simulink
- Proficiency in Simulink HDL Coder

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167901
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3-C

Description:
Chipton Ross is seeking a Systems Engineer for a contract position in El Segundo, CA.

RESPONSIBILITIES:
As an Early Career DSP Subsystems/Algorithms Engineer (Level 3), you will design and develop state-of-the-art, space based
communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated
team that works with domestic or international customers on their latest satellite systems.
Subsystems or Algorithm duties include:
Designing and developing next generation RF and digital satellite communication systems
Developing and verifying multi-rate, fixed-point signal processing algorithms
Conducting performance analysis of signal processing models
Performing waveform development and characterization
Performing trade studies
Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
Supporting HDL-level design and verification
Performing detailed system design and verification activities


Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to
satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers,
suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory
and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 1+ years of experience with Matlab and/or Simulink.
- 3+ years of experience in digital signal processing or digital communications
- 3+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture
design and trade design).

REQUIREMENTS:
- Proficiency in Matlab/Simulink.
- Experience working with ASICs or FPGAs
- Experience with performance characteristics of analog electronics or data converters (ADCs / DACs)
- Experience with digital/RF lab equipment (oscilloscope, signal generator, spectrum analyzer)

EDUCATION:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
First Shift - 8-5PM, 5/40

TRAVEL:
10%

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 167895
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 03/14/2018
Last Updated: 10/21/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • As a Senior Systems Safety Engineer, you will help design and develop mission systems products covering all spectrum bands, across multiple airborne and ground platforms.


 


Job Responsibilities:



  • Writes, reviews and approves safety documents in accordance with ARP-4754A, ARP-4761 or MIL-STD-882 including FHA, PSSA, SSA, Development of Hazard and Fault Tree Analyses

  • Completing MIL-STD-882E System Safety hazard analyses, clearly documenting all results for formal report delivery to the customer


 


Basic Qualifications:



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Knowledge of MIL-STD-882E (DoD System Safety Standard Practice) and SAE ARP 4761 (Civil Aviation Safety Assessment Guidelines / Methods)

  • Prior experience applying MIL-STD-882E and/or SAE ARP 4761 System Safety assessment techniques in the design of safety-critical products, preferably for military end-users.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14032
Job Location: Richardson, TX
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 18 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
Job Description:
Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.

Skill/Experience/Education:
Mandatory:
Electrical, fabrication, troubleshooting
 
Job Number: 09815
Job Location: Orlando, FL
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 04/06/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 03/27/2018
Last Updated: 10/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Test & Evaluation Engineer 3
(U.S. Citizenship Required*)
Mesa, AZ
2018-6204

Responsibilities:
• Work in an engineering developmental test lab to design, implement and test structural and mechanical components.
• Develop detailed test procedures, including instrumentation and configuration definition needed to perform the test and minimize risk.
• Design components, sub-assembly and load system hardware and use analytical tools to verify the design with a focus on safety.
• Assist in coordinating the manufacture and assembly of test hardware.
• Review test data for accuracy, quality and fidelity.
• Create test reports for delivery to the customer.

Qualification:
• Direct working experience in the areas of developmental test, automotive or aerospace engineering.
• Unigraphics and/or CATIA experience is required.
Preferred:
• Minimum of 4 years of structural test experience supporting aircraft structures
• Experience with industrial test laboratory environments and procedures
• Experience with structural, mechanical, and dynamic component interrelationships and capabilities
• Experience in a lab environment with data acquisition systems and test instrumentation.
• Experience with MTS AeroPro software.
• Vibration test equipment, fixture design, testing standards end execution of vibe tests.
• Experience with sensors including accelerometers, strain gages, thermocouples, load cells, and microphones.
• Experience with principles of operation of transducers.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6204
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 6 Months
Input Date: 06/13/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3 (Structural & Mech Testing)

Description:
Please share updated resume at ravi@iconma.com if interested

Test & Evaluation Engineer 3

Location: Mesa, AZ
Duration: 6 months

Primary Responsibilities
- Work in an engineering developmental test lab to design, implement and test structural and mechanical components.
- Develop detailed test procedures, including instrumentation and configuration definition needed to perform the test and minimize risk.
- Design components, sub-assembly and load system hardware and use analytical tools to verify the design with a focus on safety.
- Assist in coordinating the manufacture and assembly of test hardware.
- Review test data for accuracy, quality and fidelity.
- Create test reports for delivery to the customer.

Basic (Required) Qualifications
- Bachelor's Degree or higher is required.
- Direct working experience in the areas of developmental test, automotive or aerospace engineering.
- Unigraphics and/or CATIA experience is required.

Preferred (Desired) Qualifications
- Minimum of 4 years of structural test experience supporting aircraft structures
- Experience with industrial test laboratory environments and procedures
- Experience with structural, mechanical, and dynamic component interrelationships and capabilities
- Experience in a lab environment with data acquisition systems and test instrumentation.
- Experience with MTS AeroPro software.
- Vibration test equipment, fixture design, testing standards end execution of vibe tests.
- Experience with sensors including accelerometers, strain gages, thermocouples, load cells, and microphones.
- Experience with principles of operation of transducers.

Skill Code:
63Z-Structural & Mech Testing
 
Job Number: 18-10021
Job Location: Mesa,, AZ
Input Date: 06/12/2018
Last Updated: 06/26/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Test Engineer reports to the Test Engineering Manager the Temporary Test Engineer is responsible for the execution of testing for the certification and design verification of aircraft components. Also responsible for the design of test equipment and associated interfaces, and for the analysis and interpretation of certification and developmental tests for new and modified aircraft components. Applies select engineering techniques to solve problems, conduct tests and make design recommendations.

JOB RESPONSIBILITIES

• Plans and oversees the successful execution of delegated tests and associated tasks
• Operates hydraulic and pneumatic test systems through automated control and Data Acquisition systems to execute testing of test units and/or components and assemblies
• Records and analyzes test data using Data Acquisition systems for design development, regulatory certification requirements, standardization, and/or quality control of product
• Writes and reviews test plans, project instructions and drawings in support of testing
• Designs and develops requisite test support equipment or structures necessary to execute testing, including creation of all related models and drawings
• Drafts detail drawings or sketches for parts fabrication by machine, metal or wood shops
• Devises, plans, and assembles new or modified electromechanical components or assemblies, such as industrial equipment and machinery, power equipment, hydraulic and pneumatic systems and components, machine tools, and measuring instruments for testing
• Participates as a team member in defining engineering approaches and in planning and scheduling work to ensure projects are completed on time and within budget
• Plans, directs preparation of, and assists in the fabrication and assembly of test parts, test equipment and test setups as necessary
• Provides technical leadership to other test engineers and technicians as necessary
• Develops and records test procedures and results, analyzes numerical and graphical data, and provides recommendations for changes in product or test method as required
• Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and modifies or adjusts test equipment to meet specifications as necessary
• Assists in developing test specifications, procedures, or objectives and in developing potential solutions to design challenges such as part redesign, substitution of material or parts, or rearrangement of parts and/or subassemblies
• May be required to assist in programming of automated test control and Data Acquisition systems
• Other related duties may be assigned as required



• Bachelor's degree in Engineering or related field from a four-year college or university
• Three years related experience and/or training; or equivalent combination of education and experience
• 3D modeling experience



• Bachelor's degree in Engineering or related field from a four-year college or university
• Three years related experience and/or training; or equivalent combination of education and experience
• 3D modeling experience
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Eng III

Description:
Tool Design Eng III
Savannah, GA
Rate: $60.00/HR

Unique Skills:

Must be proficient in Catia V5


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.


Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Gulfstream aircraft.

Principle Duties and Responsibilities:

Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.
 
Job Number: 9214
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Highly motivated tool design engineer with experience in tooling for composite structures and assemblies for military and/or commercial aircraft.


Responsibilities will include but are not limited to the design of tooling for composite aerospace part, structural analysis of tools using closed and FEA, support of tool fabrication efforts, tool source inspection and support of proofing operations at Orbital ATK facilities.


 


Experience Requirements:


Minimum of 7 years related experience in design engineering function


Minimum of 4 years of experience with CATIA V5 and/or NX


Previous experience working with large scale aerospace projects


Knowledge of composite materials and manufacturing processes


 


Experience Preferred:


Proficiency with NX, Catia V is desirable


Previous experience with working process, testing or product design engineering for aerospace parts


Requirements definition and verification


Previous experience in aerospace manufacturing facility


 


Education/Certifications:


BS degree in Civil, Mechanical, Aerospace Engineering, or related


 
Job Number: O8089456
Job Location: Clearfield, UT
Rate: 65-80
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer I CATIA V5 ( Clearfield, UTAH ) S8089456

Description:
Tool Design Engineer I CATIA V5 ( Clearfield, UTAH ) S8089456
12 Month Contract

Pay Rate: $ 50-60 /hr W2, maybe more for the right person.

• MUST HAVE AN ACTIVE DoD SECRET LEVEL SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE

Highly motivated tool design engineer with experience in tooling for composite structures and assemblies for military and/or commercial aircraft. Responsibilities will include but are not limited to the design of tooling for composite aerospace part, structural analysis of tools using closed and FEA, support of tool fabrication efforts, tool source inspection and support of proofing operations at Orbital ATK facilities.

Top three skills:
• MUST HAVE AN ACTIVE DoD SECRET LEVEL SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 7 years related experience in design engineering function
• Minimum of 4 years of experience with CATIA V5 and/or NX
 
Job Number: S8089456
Job Location: Clearfield, UT
Rate: 60
Per Diem: split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 09/07/2018
Last Updated: 09/17/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-289
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 10/08/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer - Level 2

Description:
Location: Bothell, WA
Rate: $35.00 - $45.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Possible

****MUST be a U.S. Citizen****

Description
- Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Utilizes CAD/CAM to design tools. Involved with start-up activities associated with new product introduction including developing tooling concepts, detailed tool design, ordering, tracking, final prove in of tooling, and process development and implementation.
- Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
- Will utilize software programs to develop MPP's, design tooling, support equipment, and process flows.
- Provide technical guidance and support to manufacturing assembly team.
- Apply lean manufacturing techniques to reduce cost and increase yields.
- Investigate root cause of failures/defects and implement corrective action to support continuous improvement.


Skill/Experience/Education
Mandatory:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- EPDM experience
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds

Desired:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
- SAP experience
- Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
 
Job Number: 9373
Job Location: Bothell, WA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
industrial engineer

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
 
Job Number: 18-09929
Job Location: Everett, WA
Input Date: 06/12/2018
Last Updated: 06/26/2018
Firm Name: ICONMA LLC
Attention: sachin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Back to Advanced Job Search